input: serio: add support for Amstrad Delta serial keyboardport

The patch introduces a serio driver that supports a keyboard serial port found
on the Amstrad Delta videophone board.

After initializing the hardware, the driver reads its input data from a buffer
filled in by the board FIQ (Fast Interrupt Request) handler.

Standard AT keyboard driver (atkbd) will be used on top of the serio layer for
handling the E3 keyboard (called mailboard) connected to the port. Since the
device generated scancodes differ from what the atkbd expects, a custom key
code to scan code table must be loaded from userspace for the keyboard to be
useable.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 177 insertions, 0 deletions

diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
new file mode 100644
index 000000000000..8f1770e1e08b
--- /dev/null
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -0,0 +1,177 @@
+/*
+ *  Amstrad E3 (Delta) keyboard port driver
+ *
+ *  Copyright (c) 2006 Matt Callow
+ *  Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Thanks to Cliff Lawson for his help
+ *
+ * The Amstrad Delta keyboard (aka mailboard) uses normal PC-AT style serial
+ * transmission.  The keyboard port is formed of two GPIO lines, for clock
+ * and data.  Due to strict timing requirements of the interface,
+ * the serial data stream is read and processed by a FIQ handler.
+ * The resulting words are fetched by this driver from a circular buffer.
+ *
+ * Standard AT keyboard driver (atkbd) is used for handling the keyboard data.
+ * However, when used with the E3 mailboard that producecs non-standard
+ * scancodes, a custom key table must be prepared and loaded from userspace.
+ */
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+
+#include <asm/mach-types.h>
+#include <plat/board-ams-delta.h>
+
+#include <mach/ams-delta-fiq.h>
+
+MODULE_AUTHOR("Matt Callow");
+MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver");
+MODULE_LICENSE("GPL");
+
+static struct serio *ams_delta_serio;
+
+static int check_data(int data)
+{
+	int i, parity = 0;
+
+	/* check valid stop bit */
+	if (!(data & 0x400)) {
+		dev_warn(&ams_delta_serio->dev,
+				"invalid stop bit, data=0x%X\n",
+				data);
+		return SERIO_FRAME;
+	}
+	/* calculate the parity */
+	for (i = 1; i < 10; i++) {
+		if (data & (1 << i))
+			parity++;
+	}
+	/* it should be odd */
+	if (!(parity & 0x01)) {
+		dev_warn(&ams_delta_serio->dev,
+				"paritiy check failed, data=0x%X parity=0x%X\n",
+				data, parity);
+		return SERIO_PARITY;
+	}
+	return 0;
+}
+
+static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
+{
+	int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF];
+	int data, dfl;
+	u8 scancode;
+
+	fiq_buffer[FIQ_IRQ_PEND] = 0;
+
+	/*
+	 * Read data from the circular buffer, check it
+	 * and then pass it on the serio
+	 */
+	while (fiq_buffer[FIQ_KEYS_CNT] > 0) {
+
+		data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++];
+		fiq_buffer[FIQ_KEYS_CNT]--;
+		if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN])
+			fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+
+		dfl = check_data(data);
+		scancode = (u8) (data >> 1) & 0xFF;
+		serio_interrupt(ams_delta_serio, scancode, dfl);
+	}
+	return IRQ_HANDLED;
+}
+
+static int ams_delta_serio_open(struct serio *serio)
+{
+	/* enable keyboard */
+	ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR,
+			AMD_DELTA_LATCH2_KEYBRD_PWR);
+
+	return 0;
+}
+
+static void ams_delta_serio_close(struct serio *serio)
+{
+	/* disable keyboard */
+	ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0);
+}
+
+static int __init ams_delta_serio_init(void)
+{
+	int err;
+
+	if (!machine_is_ams_delta())
+		return -ENODEV;
+
+	ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!ams_delta_serio)
+		return -ENOMEM;
+
+	ams_delta_serio->id.type = SERIO_8042;
+	ams_delta_serio->open = ams_delta_serio_open;
+	ams_delta_serio->close = ams_delta_serio_close;
+	strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter",
+			sizeof(ams_delta_serio->name));
+	strlcpy(ams_delta_serio->phys, "GPIO/serio0",
+			sizeof(ams_delta_serio->phys));
+
+	err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data");
+	if (err) {
+		pr_err("ams_delta_serio: Couldn't request gpio pin for data\n");
+		goto serio;
+	}
+	gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+
+	err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock");
+	if (err) {
+		pr_err("ams_delta_serio: couldn't request gpio pin for clock\n");
+		goto gpio_data;
+	}
+	gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
+
+	err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
+			ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
+			"ams-delta-serio", 0);
+	if (err < 0) {
+		pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n",
+				gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
+		goto gpio_clk;
+	}
+	/*
+	 * Since GPIO register handling for keyboard clock pin is performed
+	 * at FIQ level, switch back from edge to simple interrupt handler
+	 * to avoid bad interaction.
+	 */
+	set_irq_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
+			handle_simple_irq);
+
+	serio_register_port(ams_delta_serio);
+	dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name);
+
+	return 0;
+gpio_clk:
+	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
+gpio_data:
+	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+serio:
+	kfree(ams_delta_serio);
+	return err;
+}
+module_init(ams_delta_serio_init);
+
+static void __exit ams_delta_serio_exit(void)
+{
+	serio_unregister_port(ams_delta_serio);
+	free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
+	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
+	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+	kfree(ams_delta_serio);
+}
+module_exit(ams_delta_serio_exit);