Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 225 insertions, 0 deletions

diff --git a/drivers/input/serio/ct82c710.c b/drivers/input/serio/ct82c710.c
new file mode 100644
index 000000000000..dd0f5bd90241
--- /dev/null
+++ b/drivers/input/serio/ct82c710.c
@@ -0,0 +1,225 @@
+/*
+ * $Id: ct82c710.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  82C710 C&T mouse port chip driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("82C710 C&T mouse port chip driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * ct82c710 interface
+ */
+
+#define CT82C710_DEV_IDLE     0x01		/* Device Idle */
+#define CT82C710_RX_FULL      0x02		/* Device Char received */
+#define CT82C710_TX_IDLE      0x04		/* Device XMIT Idle */
+#define CT82C710_RESET        0x08		/* Device Reset */
+#define CT82C710_INTS_ON      0x10		/* Device Interrupt On */
+#define CT82C710_ERROR_FLAG   0x20		/* Device Error */
+#define CT82C710_CLEAR        0x40		/* Device Clear */
+#define CT82C710_ENABLE       0x80		/* Device Enable */
+
+#define CT82C710_IRQ          12
+
+#define CT82C710_DATA         ct82c710_iores.start
+#define CT82C710_STATUS       (ct82c710_iores.start + 1)
+
+static struct serio *ct82c710_port;
+static struct platform_device *ct82c710_device;
+static struct resource ct82c710_iores;
+
+/*
+ * Interrupt handler for the 82C710 mouse port. A character
+ * is waiting in the 82C710.
+ */
+
+static irqreturn_t ct82c710_interrupt(int cpl, void *dev_id, struct pt_regs * regs)
+{
+	return serio_interrupt(ct82c710_port, inb(CT82C710_DATA), 0, regs);
+}
+
+/*
+ * Wait for device to send output char and flush any input char.
+ */
+
+static int ct82c170_wait(void)
+{
+	int timeout = 60000;
+
+	while ((inb(CT82C710_STATUS) & (CT82C710_RX_FULL | CT82C710_TX_IDLE | CT82C710_DEV_IDLE))
+		       != (CT82C710_DEV_IDLE | CT82C710_TX_IDLE) && timeout) {
+
+		if (inb_p(CT82C710_STATUS) & CT82C710_RX_FULL) inb_p(CT82C710_DATA);
+
+		udelay(1);
+		timeout--;
+	}
+
+	return !timeout;
+}
+
+static void ct82c710_close(struct serio *serio)
+{
+	if (ct82c170_wait())
+		printk(KERN_WARNING "ct82c710.c: Device busy in close()\n");
+
+	outb_p(inb_p(CT82C710_STATUS) & ~(CT82C710_ENABLE | CT82C710_INTS_ON), CT82C710_STATUS);
+
+	if (ct82c170_wait())
+		printk(KERN_WARNING "ct82c710.c: Device busy in close()\n");
+
+	free_irq(CT82C710_IRQ, NULL);
+}
+
+static int ct82c710_open(struct serio *serio)
+{
+	unsigned char status;
+
+	if (request_irq(CT82C710_IRQ, ct82c710_interrupt, 0, "ct82c710", NULL))
+		return -1;
+
+	status = inb_p(CT82C710_STATUS);
+
+	status |= (CT82C710_ENABLE | CT82C710_RESET);
+	outb_p(status, CT82C710_STATUS);
+
+	status &= ~(CT82C710_RESET);
+	outb_p(status, CT82C710_STATUS);
+
+	status |= CT82C710_INTS_ON;
+	outb_p(status, CT82C710_STATUS);	/* Enable interrupts */
+
+	while (ct82c170_wait()) {
+		printk(KERN_ERR "ct82c710: Device busy in open()\n");
+		status &= ~(CT82C710_ENABLE | CT82C710_INTS_ON);
+		outb_p(status, CT82C710_STATUS);
+		free_irq(CT82C710_IRQ, NULL);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Write to the 82C710 mouse device.
+ */
+
+static int ct82c710_write(struct serio *port, unsigned char c)
+{
+	if (ct82c170_wait()) return -1;
+	outb_p(c, CT82C710_DATA);
+	return 0;
+}
+
+/*
+ * See if we can find a 82C710 device. Read mouse address.
+ */
+
+static int __init ct82c710_probe(void)
+{
+	outb_p(0x55, 0x2fa);				/* Any value except 9, ff or 36 */
+	outb_p(0xaa, 0x3fa);				/* Inverse of 55 */
+	outb_p(0x36, 0x3fa);				/* Address the chip */
+	outb_p(0xe4, 0x3fa);				/* 390/4; 390 = config address */
+	outb_p(0x1b, 0x2fa);				/* Inverse of e4 */
+	outb_p(0x0f, 0x390);				/* Write index */
+	if (inb_p(0x391) != 0xe4)			/* Config address found? */
+		return -1;				/* No: no 82C710 here */
+
+	outb_p(0x0d, 0x390);				/* Write index */
+	ct82c710_iores.start = inb_p(0x391) << 2;	/* Get mouse I/O address */
+	ct82c710_iores.end = ct82c710_iores.start + 1;
+	ct82c710_iores.flags = IORESOURCE_IO;
+	outb_p(0x0f, 0x390);
+	outb_p(0x0f, 0x391);				/* Close config mode */
+
+	return 0;
+}
+
+static struct serio * __init ct82c710_allocate_port(void)
+{
+	struct serio *serio;
+
+	serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
+	if (serio) {
+		memset(serio, 0, sizeof(struct serio));
+		serio->id.type = SERIO_8042;
+		serio->open = ct82c710_open;
+		serio->close = ct82c710_close;
+		serio->write = ct82c710_write;
+		serio->dev.parent = &ct82c710_device->dev;
+		strlcpy(serio->name, "C&T 82c710 mouse port", sizeof(serio->name));
+		snprintf(serio->phys, sizeof(serio->phys), "isa%04lx/serio0", CT82C710_DATA);
+	}
+
+	return serio;
+}
+
+static int __init ct82c710_init(void)
+{
+	if (ct82c710_probe())
+		return -ENODEV;
+
+	ct82c710_device = platform_device_register_simple("ct82c710", -1, &ct82c710_iores, 1);
+	if (IS_ERR(ct82c710_device))
+		return PTR_ERR(ct82c710_device);
+
+	if (!(ct82c710_port = ct82c710_allocate_port())) {
+		platform_device_unregister(ct82c710_device);
+		return -ENOMEM;
+	}
+
+	serio_register_port(ct82c710_port);
+
+	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#lx irq %d\n",
+		CT82C710_DATA, CT82C710_IRQ);
+
+	return 0;
+}
+
+static void __exit ct82c710_exit(void)
+{
+	serio_unregister_port(ct82c710_port);
+	platform_device_unregister(ct82c710_device);
+}
+
+module_init(ct82c710_init);
+module_exit(ct82c710_exit);