Input: atmel_tsadcc: remove driver

The atmel_tsadcc driver is not used anymore, it has been replaced by at91_adc so
remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

3 files changed, 0 insertions, 371 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 68edc9db2c64..0b5965ba51bc 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -550,18 +550,6 @@ config TOUCHSCREEN_TI_AM335X_TSC
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti_am335x_tsc.
 
-config TOUCHSCREEN_ATMEL_TSADCC
-	tristate "Atmel Touchscreen Interface"
-	depends on ARCH_AT91
-	help
-	  Say Y here if you have a 4-wire touchscreen connected to the
-          ADC Controller on your Atmel SoC.
-
-	  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called atmel_tsadcc.
-
 config TOUCHSCREEN_UCB1400
 	tristate "Philips UCB1400 touchscreen"
 	depends on AC97_BUS
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 4bc954b7c7c3..03f12a1f2218 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
-obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
deleted file mode 100644
index a7c9d6967d1e..000000000000
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- *  Atmel Touch Screen Driver
- *
- *  Copyright (c) 2008 ATMEL
- *  Copyright (c) 2008 Dan Liang
- *  Copyright (c) 2008 TimeSys Corporation
- *  Copyright (c) 2008 Justin Waters
- *
- *  Based on touchscreen code from Atmel Corporation.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/atmel.h>
-#include <mach/cpu.h>
-
-/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
-
-#define ATMEL_TSADCC_CR		0x00	/* Control register */
-#define   ATMEL_TSADCC_SWRST	(1 << 0)	/* Software Reset*/
-#define	  ATMEL_TSADCC_START	(1 << 1)	/* Start conversion */
-
-#define ATMEL_TSADCC_MR		0x04	/* Mode register */
-#define	  ATMEL_TSADCC_TSAMOD	(3    <<  0)	/* ADC mode */
-#define	    ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE	(0x0)	/* ADC Mode */
-#define	    ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE	(0x1)	/* Touch Screen Only Mode */
-#define	  ATMEL_TSADCC_LOWRES	(1    <<  4)	/* Resolution selection */
-#define	  ATMEL_TSADCC_SLEEP	(1    <<  5)	/* Sleep mode */
-#define	  ATMEL_TSADCC_PENDET	(1    <<  6)	/* Pen Detect selection */
-#define	  ATMEL_TSADCC_PRES	(1    <<  7)	/* Pressure Measurement Selection */
-#define	  ATMEL_TSADCC_PRESCAL	(0x3f <<  8)	/* Prescalar Rate Selection */
-#define	  ATMEL_TSADCC_EPRESCAL	(0xff <<  8)	/* Prescalar Rate Selection (Extended) */
-#define	  ATMEL_TSADCC_STARTUP	(0x7f << 16)	/* Start Up time */
-#define	  ATMEL_TSADCC_SHTIM	(0xf  << 24)	/* Sample & Hold time */
-#define	  ATMEL_TSADCC_PENDBC	(0xf  << 28)	/* Pen Detect debouncing time */
-
-#define ATMEL_TSADCC_TRGR	0x08	/* Trigger register */
-#define	  ATMEL_TSADCC_TRGMOD	(7      <<  0)	/* Trigger mode */
-#define	    ATMEL_TSADCC_TRGMOD_NONE		(0 << 0)
-#define     ATMEL_TSADCC_TRGMOD_EXT_RISING	(1 << 0)
-#define     ATMEL_TSADCC_TRGMOD_EXT_FALLING	(2 << 0)
-#define     ATMEL_TSADCC_TRGMOD_EXT_ANY		(3 << 0)
-#define     ATMEL_TSADCC_TRGMOD_PENDET		(4 << 0)
-#define     ATMEL_TSADCC_TRGMOD_PERIOD		(5 << 0)
-#define     ATMEL_TSADCC_TRGMOD_CONTINUOUS	(6 << 0)
-#define   ATMEL_TSADCC_TRGPER	(0xffff << 16)	/* Trigger period */
-
-#define ATMEL_TSADCC_TSR	0x0C	/* Touch Screen register */
-#define	  ATMEL_TSADCC_TSFREQ	(0xf <<  0)	/* TS Frequency in Interleaved mode */
-#define	  ATMEL_TSADCC_TSSHTIM	(0xf << 24)	/* Sample & Hold time */
-
-#define ATMEL_TSADCC_CHER	0x10	/* Channel Enable register */
-#define ATMEL_TSADCC_CHDR	0x14	/* Channel Disable register */
-#define ATMEL_TSADCC_CHSR	0x18	/* Channel Status register */
-#define	  ATMEL_TSADCC_CH(n)	(1 << (n))	/* Channel number */
-
-#define ATMEL_TSADCC_SR		0x1C	/* Status register */
-#define	  ATMEL_TSADCC_EOC(n)	(1 << ((n)+0))	/* End of conversion for channel N */
-#define	  ATMEL_TSADCC_OVRE(n)	(1 << ((n)+8))	/* Overrun error for channel N */
-#define	  ATMEL_TSADCC_DRDY	(1 << 16)	/* Data Ready */
-#define	  ATMEL_TSADCC_GOVRE	(1 << 17)	/* General Overrun Error */
-#define	  ATMEL_TSADCC_ENDRX	(1 << 18)	/* End of RX Buffer */
-#define	  ATMEL_TSADCC_RXBUFF	(1 << 19)	/* TX Buffer full */
-#define	  ATMEL_TSADCC_PENCNT	(1 << 20)	/* Pen contact */
-#define	  ATMEL_TSADCC_NOCNT	(1 << 21)	/* No contact */
-
-#define ATMEL_TSADCC_LCDR	0x20	/* Last Converted Data register */
-#define	  ATMEL_TSADCC_DATA	(0x3ff << 0)	/* Channel data */
-
-#define ATMEL_TSADCC_IER	0x24	/* Interrupt Enable register */
-#define ATMEL_TSADCC_IDR	0x28	/* Interrupt Disable register */
-#define ATMEL_TSADCC_IMR	0x2C	/* Interrupt Mask register */
-#define ATMEL_TSADCC_CDR0	0x30	/* Channel Data 0 */
-#define ATMEL_TSADCC_CDR1	0x34	/* Channel Data 1 */
-#define ATMEL_TSADCC_CDR2	0x38	/* Channel Data 2 */
-#define ATMEL_TSADCC_CDR3	0x3C	/* Channel Data 3 */
-#define ATMEL_TSADCC_CDR4	0x40	/* Channel Data 4 */
-#define ATMEL_TSADCC_CDR5	0x44	/* Channel Data 5 */
-
-#define ATMEL_TSADCC_XPOS	0x50
-#define ATMEL_TSADCC_Z1DAT	0x54
-#define ATMEL_TSADCC_Z2DAT	0x58
-
-#define PRESCALER_VAL(x)	((x) >> 8)
-
-#define ADC_DEFAULT_CLOCK	100000
-
-struct atmel_tsadcc {
-	struct input_dev	*input;
-	char			phys[32];
-	struct clk		*clk;
-	int			irq;
-	unsigned int		prev_absx;
-	unsigned int		prev_absy;
-	unsigned char		bufferedmeasure;
-};
-
-static void __iomem		*tsc_base;
-
-#define atmel_tsadcc_read(reg)		__raw_readl(tsc_base + (reg))
-#define atmel_tsadcc_write(reg, val)	__raw_writel((val), tsc_base + (reg))
-
-static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
-{
-	struct atmel_tsadcc	*ts_dev = (struct atmel_tsadcc *)dev;
-	struct input_dev	*input_dev = ts_dev->input;
-
-	unsigned int status;
-	unsigned int reg;
-
-	status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
-	status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
-
-	if (status & ATMEL_TSADCC_NOCNT) {
-		/* Contact lost */
-		reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
-
-		atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
-		atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
-		atmel_tsadcc_write(ATMEL_TSADCC_IDR,
-				   ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
-		atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
-
-		input_report_key(input_dev, BTN_TOUCH, 0);
-		ts_dev->bufferedmeasure = 0;
-		input_sync(input_dev);
-
-	} else if (status & ATMEL_TSADCC_PENCNT) {
-		/* Pen detected */
-		reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
-		reg &= ~ATMEL_TSADCC_PENDBC;
-
-		atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
-		atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
-		atmel_tsadcc_write(ATMEL_TSADCC_IER,
-				   ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
-		atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
-				   ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
-
-	} else if (status & ATMEL_TSADCC_EOC(3)) {
-		/* Conversion finished */
-
-		if (ts_dev->bufferedmeasure) {
-			/* Last measurement is always discarded, since it can
-			 * be erroneous.
-			 * Always report previous measurement */
-			input_report_abs(input_dev, ABS_X, ts_dev->prev_absx);
-			input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy);
-			input_report_key(input_dev, BTN_TOUCH, 1);
-			input_sync(input_dev);
-		} else
-			ts_dev->bufferedmeasure = 1;
-
-		/* Now make new measurement */
-		ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
-		ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
-
-		ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
-		ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int atmel_tsadcc_probe(struct platform_device *pdev)
-{
-	struct atmel_tsadcc	*ts_dev;
-	struct input_dev	*input_dev;
-	struct resource		*res;
-	struct at91_tsadcc_data *pdata = dev_get_platdata(&pdev->dev);
-	int		err;
-	unsigned int	prsc;
-	unsigned int	reg;
-
-	if (!pdata)
-		return -EINVAL;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "no mmio resource defined.\n");
-		return -ENXIO;
-	}
-
-	/* Allocate memory for device */
-	ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
-	if (!ts_dev) {
-		dev_err(&pdev->dev, "failed to allocate memory.\n");
-		return -ENOMEM;
-	}
-	platform_set_drvdata(pdev, ts_dev);
-
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		dev_err(&pdev->dev, "failed to allocate input device.\n");
-		err = -EBUSY;
-		goto err_free_mem;
-	}
-
-	ts_dev->irq = platform_get_irq(pdev, 0);
-	if (ts_dev->irq < 0) {
-		dev_err(&pdev->dev, "no irq ID is designated.\n");
-		err = -ENODEV;
-		goto err_free_dev;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res),
-				"atmel tsadcc regs")) {
-		dev_err(&pdev->dev, "resources is unavailable.\n");
-		err = -EBUSY;
-		goto err_free_dev;
-	}
-
-	tsc_base = ioremap(res->start, resource_size(res));
-	if (!tsc_base) {
-		dev_err(&pdev->dev, "failed to map registers.\n");
-		err = -ENOMEM;
-		goto err_release_mem;
-	}
-
-	err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0,
-			pdev->dev.driver->name, ts_dev);
-	if (err) {
-		dev_err(&pdev->dev, "failed to allocate irq.\n");
-		goto err_unmap_regs;
-	}
-
-	ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
-	if (IS_ERR(ts_dev->clk)) {
-		dev_err(&pdev->dev, "failed to get ts_clk\n");
-		err = PTR_ERR(ts_dev->clk);
-		goto err_free_irq;
-	}
-
-	ts_dev->input = input_dev;
-	ts_dev->bufferedmeasure = 0;
-
-	snprintf(ts_dev->phys, sizeof(ts_dev->phys),
-		 "%s/input0", dev_name(&pdev->dev));
-
-	input_dev->name = "atmel touch screen controller";
-	input_dev->phys = ts_dev->phys;
-	input_dev->dev.parent = &pdev->dev;
-
-	__set_bit(EV_ABS, input_dev->evbit);
-	input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
-
-	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
-
-	/* clk_enable() always returns 0, no need to check it */
-	clk_enable(ts_dev->clk);
-
-	prsc = clk_get_rate(ts_dev->clk);
-	dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
-
-	if (!pdata->adc_clock)
-		pdata->adc_clock = ADC_DEFAULT_CLOCK;
-
-	prsc = (prsc / (2 * pdata->adc_clock)) - 1;
-
-	/* saturate if this value is too high */
-	if (cpu_is_at91sam9rl()) {
-		if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL))
-			prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL);
-	} else {
-		if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL))
-			prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL);
-	}
-
-	dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc);
-
-	reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE		|
-		((0x00 << 5) & ATMEL_TSADCC_SLEEP)	|	/* Normal Mode */
-		((0x01 << 6) & ATMEL_TSADCC_PENDET)	|	/* Enable Pen Detect */
-		(prsc << 8)				|
-		((0x26 << 16) & ATMEL_TSADCC_STARTUP)	|
-		((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC);
-
-	atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
-	atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
-	atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
-	atmel_tsadcc_write(ATMEL_TSADCC_TSR,
-		(pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM);
-
-	atmel_tsadcc_read(ATMEL_TSADCC_SR);
-	atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
-
-	/* All went ok, so register to the input system */
-	err = input_register_device(input_dev);
-	if (err)
-		goto err_fail;
-
-	return 0;
-
-err_fail:
-	clk_disable(ts_dev->clk);
-	clk_put(ts_dev->clk);
-err_free_irq:
-	free_irq(ts_dev->irq, ts_dev);
-err_unmap_regs:
-	iounmap(tsc_base);
-err_release_mem:
-	release_mem_region(res->start, resource_size(res));
-err_free_dev:
-	input_free_device(input_dev);
-err_free_mem:
-	kfree(ts_dev);
-	return err;
-}
-
-static int atmel_tsadcc_remove(struct platform_device *pdev)
-{
-	struct atmel_tsadcc *ts_dev = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	free_irq(ts_dev->irq, ts_dev);
-
-	input_unregister_device(ts_dev->input);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	iounmap(tsc_base);
-	release_mem_region(res->start, resource_size(res));
-
-	clk_disable(ts_dev->clk);
-	clk_put(ts_dev->clk);
-
-	kfree(ts_dev);
-
-	return 0;
-}
-
-static struct platform_driver atmel_tsadcc_driver = {
-	.probe		= atmel_tsadcc_probe,
-	.remove		= atmel_tsadcc_remove,
-	.driver		= {
-		.name	= "atmel_tsadcc",
-	},
-};
-module_platform_driver(atmel_tsadcc_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atmel TouchScreen Driver");
-MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
-