Merge branch 'for-linus' into next

Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.

8 files changed, 643 insertions, 24 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ac5aa12ac190..ee02dc7422bd 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -833,6 +833,15 @@ config TOUCHSCREEN_USB_COMPOSITE
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbtouchscreen.
 
+config TOUCHSCREEN_MX25
+	tristate "Freescale i.MX25 touchscreen input driver"
+	depends on MFD_MX25_TSADC
+	help
+	  Enable support for touchscreen connected to your i.MX25.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fsl-imx25-tcq.
+
 config TOUCHSCREEN_MC13783
 	tristate "Freescale MC13783 touchscreen input driver"
 	depends on MFD_MC13XXX
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index d17d57d827b9..3315882905f7 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
 obj-$(CONFIG_TOUCHSCREEN_IPROC)		+= bcm_iproc_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MAX11801)	+= max11801_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MX25)		+= fsl-imx25-tcq.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MCS5000)	+= mcs5000_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MELFAS_MIP4)	+= melfas_mip4.o
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 2160512e861a..5af7907d0af4 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1093,6 +1093,19 @@ static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
 	return 0;
 }
 
+static int mxt_acquire_irq(struct mxt_data *data)
+{
+	int error;
+
+	enable_irq(data->irq);
+
+	error = mxt_process_messages_until_invalid(data);
+	if (error)
+		return error;
+
+	return 0;
+}
+
 static int mxt_soft_reset(struct mxt_data *data)
 {
 	struct device *dev = &data->client->dev;
@@ -1111,7 +1124,7 @@ static int mxt_soft_reset(struct mxt_data *data)
 	/* Ignore CHG line for 100ms after reset */
 	msleep(100);
 
-	enable_irq(data->irq);
+	mxt_acquire_irq(data);
 
 	ret = mxt_wait_for_completion(data, &data->reset_completion,
 				      MXT_RESET_TIMEOUT);
@@ -1466,19 +1479,6 @@ release_mem:
 	return ret;
 }
 
-static int mxt_acquire_irq(struct mxt_data *data)
-{
-	int error;
-
-	enable_irq(data->irq);
-
-	error = mxt_process_messages_until_invalid(data);
-	if (error)
-		return error;
-
-	return 0;
-}
-
 static int mxt_get_info(struct mxt_data *data)
 {
 	struct i2c_client *client = data->client;
diff --git a/drivers/input/touchscreen/fsl-imx25-tcq.c b/drivers/input/touchscreen/fsl-imx25-tcq.c
new file mode 100644
index 000000000000..fe9877a6af9e
--- /dev/null
+++ b/drivers/input/touchscreen/fsl-imx25-tcq.c
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Based on driver from 2011:
+ *   Juergen Beisert, Pengutronix <kernel@pengutronix.de>
+ *
+ * This is the driver for the imx25 TCQ (Touchscreen Conversion Queue)
+ * connected to the imx25 ADC.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/imx25-tsadc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static const char mx25_tcq_name[] = "mx25-tcq";
+
+enum mx25_tcq_mode {
+	MX25_TS_4WIRE,
+};
+
+struct mx25_tcq_priv {
+	struct regmap *regs;
+	struct regmap *core_regs;
+	struct input_dev *idev;
+	enum mx25_tcq_mode mode;
+	unsigned int pen_threshold;
+	unsigned int sample_count;
+	unsigned int expected_samples;
+	unsigned int pen_debounce;
+	unsigned int settling_time;
+	struct clk *clk;
+	int irq;
+	struct device *dev;
+};
+
+static struct regmap_config mx25_tcq_regconfig = {
+	.fast_io = true,
+	.max_register = 0x5c,
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static const struct of_device_id mx25_tcq_ids[] = {
+	{ .compatible = "fsl,imx25-tcq", },
+	{ /* Sentinel */ }
+};
+
+#define TSC_4WIRE_PRE_INDEX 0
+#define TSC_4WIRE_X_INDEX 1
+#define TSC_4WIRE_Y_INDEX 2
+#define TSC_4WIRE_POST_INDEX 3
+#define TSC_4WIRE_LEAVE 4
+
+#define MX25_TSC_DEF_THRESHOLD 80
+#define TSC_MAX_SAMPLES 16
+
+#define MX25_TSC_REPEAT_WAIT 14
+
+enum mx25_adc_configurations {
+	MX25_CFG_PRECHARGE = 0,
+	MX25_CFG_TOUCH_DETECT,
+	MX25_CFG_X_MEASUREMENT,
+	MX25_CFG_Y_MEASUREMENT,
+};
+
+#define MX25_PRECHARGE_VALUE (\
+			MX25_ADCQ_CFG_YPLL_OFF | \
+			MX25_ADCQ_CFG_XNUR_OFF | \
+			MX25_ADCQ_CFG_XPUL_HIGH | \
+			MX25_ADCQ_CFG_REFP_INT | \
+			MX25_ADCQ_CFG_IN_XP | \
+			MX25_ADCQ_CFG_REFN_NGND2 | \
+			MX25_ADCQ_CFG_IGS)
+
+#define MX25_TOUCH_DETECT_VALUE (\
+			MX25_ADCQ_CFG_YNLR | \
+			MX25_ADCQ_CFG_YPLL_OFF | \
+			MX25_ADCQ_CFG_XNUR_OFF | \
+			MX25_ADCQ_CFG_XPUL_OFF | \
+			MX25_ADCQ_CFG_REFP_INT | \
+			MX25_ADCQ_CFG_IN_XP | \
+			MX25_ADCQ_CFG_REFN_NGND2 | \
+			MX25_ADCQ_CFG_PENIACK)
+
+static void imx25_setup_queue_cfgs(struct mx25_tcq_priv *priv,
+				   unsigned int settling_cnt)
+{
+	u32 precharge_cfg =
+			MX25_PRECHARGE_VALUE |
+			MX25_ADCQ_CFG_SETTLING_TIME(settling_cnt);
+	u32 touch_detect_cfg =
+			MX25_TOUCH_DETECT_VALUE |
+			MX25_ADCQ_CFG_NOS(1) |
+			MX25_ADCQ_CFG_SETTLING_TIME(settling_cnt);
+
+	regmap_write(priv->core_regs, MX25_TSC_TICR, precharge_cfg);
+
+	/* PRECHARGE */
+	regmap_write(priv->regs, MX25_ADCQ_CFG(MX25_CFG_PRECHARGE),
+		     precharge_cfg);
+
+	/* TOUCH_DETECT */
+	regmap_write(priv->regs, MX25_ADCQ_CFG(MX25_CFG_TOUCH_DETECT),
+		     touch_detect_cfg);
+
+	/* X Measurement */
+	regmap_write(priv->regs, MX25_ADCQ_CFG(MX25_CFG_X_MEASUREMENT),
+		     MX25_ADCQ_CFG_YPLL_OFF |
+		     MX25_ADCQ_CFG_XNUR_LOW |
+		     MX25_ADCQ_CFG_XPUL_HIGH |
+		     MX25_ADCQ_CFG_REFP_XP |
+		     MX25_ADCQ_CFG_IN_YP |
+		     MX25_ADCQ_CFG_REFN_XN |
+		     MX25_ADCQ_CFG_NOS(priv->sample_count) |
+		     MX25_ADCQ_CFG_SETTLING_TIME(settling_cnt));
+
+	/* Y Measurement */
+	regmap_write(priv->regs, MX25_ADCQ_CFG(MX25_CFG_Y_MEASUREMENT),
+		     MX25_ADCQ_CFG_YNLR |
+		     MX25_ADCQ_CFG_YPLL_HIGH |
+		     MX25_ADCQ_CFG_XNUR_OFF |
+		     MX25_ADCQ_CFG_XPUL_OFF |
+		     MX25_ADCQ_CFG_REFP_YP |
+		     MX25_ADCQ_CFG_IN_XP |
+		     MX25_ADCQ_CFG_REFN_YN |
+		     MX25_ADCQ_CFG_NOS(priv->sample_count) |
+		     MX25_ADCQ_CFG_SETTLING_TIME(settling_cnt));
+
+	/* Enable the touch detection right now */
+	regmap_write(priv->core_regs, MX25_TSC_TICR, touch_detect_cfg |
+		     MX25_ADCQ_CFG_IGS);
+}
+
+static int imx25_setup_queue_4wire(struct mx25_tcq_priv *priv,
+				   unsigned settling_cnt, int *items)
+{
+	imx25_setup_queue_cfgs(priv, settling_cnt);
+
+	/* Setup the conversion queue */
+	regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
+		     MX25_ADCQ_ITEM(0, MX25_CFG_PRECHARGE) |
+		     MX25_ADCQ_ITEM(1, MX25_CFG_TOUCH_DETECT) |
+		     MX25_ADCQ_ITEM(2, MX25_CFG_X_MEASUREMENT) |
+		     MX25_ADCQ_ITEM(3, MX25_CFG_Y_MEASUREMENT) |
+		     MX25_ADCQ_ITEM(4, MX25_CFG_PRECHARGE) |
+		     MX25_ADCQ_ITEM(5, MX25_CFG_TOUCH_DETECT));
+
+	/*
+	 * We measure X/Y with 'sample_count' number of samples and execute a
+	 * touch detection twice, with 1 sample each
+	 */
+	priv->expected_samples = priv->sample_count * 2 + 2;
+	*items = 6;
+
+	return 0;
+}
+
+static void mx25_tcq_disable_touch_irq(struct mx25_tcq_priv *priv)
+{
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_PDMSK,
+			   MX25_ADCQ_CR_PDMSK);
+}
+
+static void mx25_tcq_enable_touch_irq(struct mx25_tcq_priv *priv)
+{
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_PDMSK, 0);
+}
+
+static void mx25_tcq_disable_fifo_irq(struct mx25_tcq_priv *priv)
+{
+	regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_FDRY_IRQ,
+			   MX25_ADCQ_MR_FDRY_IRQ);
+}
+
+static void mx25_tcq_enable_fifo_irq(struct mx25_tcq_priv *priv)
+{
+	regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_FDRY_IRQ, 0);
+}
+
+static void mx25_tcq_force_queue_start(struct mx25_tcq_priv *priv)
+{
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR,
+			   MX25_ADCQ_CR_FQS,
+			   MX25_ADCQ_CR_FQS);
+}
+
+static void mx25_tcq_force_queue_stop(struct mx25_tcq_priv *priv)
+{
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR,
+			   MX25_ADCQ_CR_FQS, 0);
+}
+
+static void mx25_tcq_fifo_reset(struct mx25_tcq_priv *priv)
+{
+	u32 tcqcr;
+
+	regmap_read(priv->regs, MX25_ADCQ_CR, &tcqcr);
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FRST,
+			   MX25_ADCQ_CR_FRST);
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FRST, 0);
+	regmap_write(priv->regs, MX25_ADCQ_CR, tcqcr);
+}
+
+static void mx25_tcq_re_enable_touch_detection(struct mx25_tcq_priv *priv)
+{
+	/* stop the queue from looping */
+	mx25_tcq_force_queue_stop(priv);
+
+	/* for a clean touch detection, preload the X plane */
+	regmap_write(priv->core_regs, MX25_TSC_TICR, MX25_PRECHARGE_VALUE);
+
+	/* waste some time now to pre-load the X plate to high voltage */
+	mx25_tcq_fifo_reset(priv);
+
+	/* re-enable the detection right now */
+	regmap_write(priv->core_regs, MX25_TSC_TICR,
+		     MX25_TOUCH_DETECT_VALUE | MX25_ADCQ_CFG_IGS);
+
+	regmap_update_bits(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_PD,
+			   MX25_ADCQ_SR_PD);
+
+	/* enable the pen down event to be a source for the interrupt */
+	regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_PD_IRQ, 0);
+
+	/* lets fire the next IRQ if someone touches the touchscreen */
+	mx25_tcq_enable_touch_irq(priv);
+}
+
+static void mx25_tcq_create_event_for_4wire(struct mx25_tcq_priv *priv,
+					    u32 *sample_buf,
+					    unsigned int samples)
+{
+	unsigned int x_pos = 0;
+	unsigned int y_pos = 0;
+	unsigned int touch_pre = 0;
+	unsigned int touch_post = 0;
+	unsigned int i;
+
+	for (i = 0; i < samples; i++) {
+		unsigned int index = MX25_ADCQ_FIFO_ID(sample_buf[i]);
+		unsigned int val = MX25_ADCQ_FIFO_DATA(sample_buf[i]);
+
+		switch (index) {
+		case 1:
+			touch_pre = val;
+			break;
+		case 2:
+			x_pos = val;
+			break;
+		case 3:
+			y_pos = val;
+			break;
+		case 5:
+			touch_post = val;
+			break;
+		default:
+			dev_dbg(priv->dev, "Dropped samples because of invalid index %d\n",
+				index);
+			return;
+		}
+	}
+
+	if (samples != 0) {
+		/*
+		 * only if both touch measures are below a threshold,
+		 * the position is valid
+		 */
+		if (touch_pre < priv->pen_threshold &&
+		    touch_post < priv->pen_threshold) {
+			/* valid samples, generate a report */
+			x_pos /= priv->sample_count;
+			y_pos /= priv->sample_count;
+			input_report_abs(priv->idev, ABS_X, x_pos);
+			input_report_abs(priv->idev, ABS_Y, y_pos);
+			input_report_key(priv->idev, BTN_TOUCH, 1);
+			input_sync(priv->idev);
+
+			/* get next sample */
+			mx25_tcq_enable_fifo_irq(priv);
+		} else if (touch_pre >= priv->pen_threshold &&
+			   touch_post >= priv->pen_threshold) {
+			/*
+			 * if both samples are invalid,
+			 * generate a release report
+			 */
+			input_report_key(priv->idev, BTN_TOUCH, 0);
+			input_sync(priv->idev);
+			mx25_tcq_re_enable_touch_detection(priv);
+		} else {
+			/*
+			 * if only one of both touch measurements are
+			 * below the threshold, still some bouncing
+			 * happens. Take additional samples in this
+			 * case to be sure
+			 */
+			mx25_tcq_enable_fifo_irq(priv);
+		}
+	}
+}
+
+static irqreturn_t mx25_tcq_irq_thread(int irq, void *dev_id)
+{
+	struct mx25_tcq_priv *priv = dev_id;
+	u32 sample_buf[TSC_MAX_SAMPLES];
+	unsigned int samples;
+	u32 stats;
+	unsigned int i;
+
+	/*
+	 * Check how many samples are available. We always have to read exactly
+	 * sample_count samples from the fifo, or a multiple of sample_count.
+	 * Otherwise we mixup samples into different touch events.
+	 */
+	regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
+	samples = MX25_ADCQ_SR_FDN(stats);
+	samples -= samples % priv->sample_count;
+
+	if (!samples)
+		return IRQ_HANDLED;
+
+	for (i = 0; i != samples; ++i)
+		regmap_read(priv->regs, MX25_ADCQ_FIFO, &sample_buf[i]);
+
+	mx25_tcq_create_event_for_4wire(priv, sample_buf, samples);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mx25_tcq_irq(int irq, void *dev_id)
+{
+	struct mx25_tcq_priv *priv = dev_id;
+	u32 stat;
+	int ret = IRQ_HANDLED;
+
+	regmap_read(priv->regs, MX25_ADCQ_SR, &stat);
+
+	if (stat & (MX25_ADCQ_SR_FRR | MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR))
+		mx25_tcq_re_enable_touch_detection(priv);
+
+	if (stat & MX25_ADCQ_SR_PD) {
+		mx25_tcq_disable_touch_irq(priv);
+		mx25_tcq_force_queue_start(priv);
+		mx25_tcq_enable_fifo_irq(priv);
+	}
+
+	if (stat & MX25_ADCQ_SR_FDRY) {
+		mx25_tcq_disable_fifo_irq(priv);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	regmap_update_bits(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR |
+			   MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR |
+			   MX25_ADCQ_SR_PD,
+			   MX25_ADCQ_SR_FRR | MX25_ADCQ_SR_FUR |
+			   MX25_ADCQ_SR_FOR | MX25_ADCQ_SR_PD);
+
+	return ret;
+}
+
+/* configure the state machine for a 4-wire touchscreen */
+static int mx25_tcq_init(struct mx25_tcq_priv *priv)
+{
+	u32 tgcr;
+	unsigned int ipg_div;
+	unsigned int adc_period;
+	unsigned int debounce_cnt;
+	unsigned int settling_cnt;
+	int itemct;
+	int error;
+
+	regmap_read(priv->core_regs, MX25_TSC_TGCR, &tgcr);
+	ipg_div = max_t(unsigned int, 4, MX25_TGCR_GET_ADCCLK(tgcr));
+	adc_period = USEC_PER_SEC * ipg_div * 2 + 2;
+	adc_period /= clk_get_rate(priv->clk) / 1000 + 1;
+	debounce_cnt = DIV_ROUND_UP(priv->pen_debounce, adc_period * 8) - 1;
+	settling_cnt = DIV_ROUND_UP(priv->settling_time, adc_period * 8) - 1;
+
+	/* Reset */
+	regmap_write(priv->regs, MX25_ADCQ_CR,
+		     MX25_ADCQ_CR_QRST | MX25_ADCQ_CR_FRST);
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR,
+			   MX25_ADCQ_CR_QRST | MX25_ADCQ_CR_FRST, 0);
+
+	/* up to 128 * 8 ADC clocks are possible */
+	if (debounce_cnt > 127)
+		debounce_cnt = 127;
+
+	/* up to 255 * 8 ADC clocks are possible */
+	if (settling_cnt > 255)
+		settling_cnt = 255;
+
+	error = imx25_setup_queue_4wire(priv, settling_cnt, &itemct);
+	if (error)
+		return error;
+
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR,
+			   MX25_ADCQ_CR_LITEMID_MASK | MX25_ADCQ_CR_WMRK_MASK,
+			   MX25_ADCQ_CR_LITEMID(itemct - 1) |
+			   MX25_ADCQ_CR_WMRK(priv->expected_samples - 1));
+
+	/* setup debounce count */
+	regmap_update_bits(priv->core_regs, MX25_TSC_TGCR,
+			   MX25_TGCR_PDBTIME_MASK,
+			   MX25_TGCR_PDBTIME(debounce_cnt));
+
+	/* enable debounce */
+	regmap_update_bits(priv->core_regs, MX25_TSC_TGCR, MX25_TGCR_PDBEN,
+			   MX25_TGCR_PDBEN);
+	regmap_update_bits(priv->core_regs, MX25_TSC_TGCR, MX25_TGCR_PDEN,
+			   MX25_TGCR_PDEN);
+
+	/* enable the engine on demand */
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_QSM_MASK,
+			   MX25_ADCQ_CR_QSM_FQS);
+
+	/* Enable repeat and repeat wait */
+	regmap_update_bits(priv->regs, MX25_ADCQ_CR,
+			   MX25_ADCQ_CR_RPT | MX25_ADCQ_CR_RWAIT_MASK,
+			   MX25_ADCQ_CR_RPT |
+			   MX25_ADCQ_CR_RWAIT(MX25_TSC_REPEAT_WAIT));
+
+	return 0;
+}
+
+static int mx25_tcq_parse_dt(struct platform_device *pdev,
+			     struct mx25_tcq_priv *priv)
+{
+	struct device_node *np = pdev->dev.of_node;
+	u32 wires;
+	int error;
+
+	/* Setup defaults */
+	priv->pen_threshold = 500;
+	priv->sample_count = 3;
+	priv->pen_debounce = 1000000;
+	priv->settling_time = 250000;
+
+	error = of_property_read_u32(np, "fsl,wires", &wires);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to find fsl,wires properties\n");
+		return error;
+	}
+
+	if (wires == 4) {
+		priv->mode = MX25_TS_4WIRE;
+	} else {
+		dev_err(&pdev->dev, "%u-wire mode not supported\n", wires);
+		return -EINVAL;
+	}
+
+	/* These are optional, we don't care about the return values */
+	of_property_read_u32(np, "fsl,pen-threshold", &priv->pen_threshold);
+	of_property_read_u32(np, "fsl,settling-time-ns", &priv->settling_time);
+	of_property_read_u32(np, "fsl,pen-debounce-ns", &priv->pen_debounce);
+
+	return 0;
+}
+
+static int mx25_tcq_open(struct input_dev *idev)
+{
+	struct device *dev = &idev->dev;
+	struct mx25_tcq_priv *priv = dev_get_drvdata(dev);
+	int error;
+
+	error = clk_prepare_enable(priv->clk);
+	if (error) {
+		dev_err(dev, "Failed to enable ipg clock\n");
+		return error;
+	}
+
+	error = mx25_tcq_init(priv);
+	if (error) {
+		dev_err(dev, "Failed to init tcq\n");
+		clk_disable_unprepare(priv->clk);
+		return error;
+	}
+
+	mx25_tcq_re_enable_touch_detection(priv);
+
+	return 0;
+}
+
+static void mx25_tcq_close(struct input_dev *idev)
+{
+	struct mx25_tcq_priv *priv = input_get_drvdata(idev);
+
+	mx25_tcq_force_queue_stop(priv);
+	mx25_tcq_disable_touch_irq(priv);
+	mx25_tcq_disable_fifo_irq(priv);
+	clk_disable_unprepare(priv->clk);
+}
+
+static int mx25_tcq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct input_dev *idev;
+	struct mx25_tcq_priv *priv;
+	struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
+	struct resource *res;
+	void __iomem *mem;
+	int error;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mem = devm_ioremap_resource(dev, res);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	error = mx25_tcq_parse_dt(pdev, priv);
+	if (error)
+		return error;
+
+	priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_tcq_regconfig);
+	if (IS_ERR(priv->regs)) {
+		dev_err(dev, "Failed to initialize regmap\n");
+		return PTR_ERR(priv->regs);
+	}
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq <= 0) {
+		dev_err(dev, "Failed to get IRQ\n");
+		return priv->irq;
+	}
+
+	idev = devm_input_allocate_device(dev);
+	if (!idev) {
+		dev_err(dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	idev->name = mx25_tcq_name;
+	input_set_capability(idev, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(idev, ABS_X, 0, 0xfff, 0, 0);
+	input_set_abs_params(idev, ABS_Y, 0, 0xfff, 0, 0);
+
+	idev->id.bustype = BUS_HOST;
+	idev->open = mx25_tcq_open;
+	idev->close = mx25_tcq_close;
+
+	priv->idev = idev;
+	input_set_drvdata(idev, priv);
+
+	priv->core_regs = tsadc->regs;
+	if (!priv->core_regs)
+		return -EINVAL;
+
+	priv->clk = tsadc->clk;
+	if (!priv->clk)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, priv);
+
+	error = devm_request_threaded_irq(dev, priv->irq, mx25_tcq_irq,
+					  mx25_tcq_irq_thread, 0, pdev->name,
+					  priv);
+	if (error) {
+		dev_err(dev, "Failed requesting IRQ\n");
+		return error;
+	}
+
+	error = input_register_device(idev);
+	if (error) {
+		dev_err(dev, "Failed to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static struct platform_driver mx25_tcq_driver = {
+	.driver		= {
+		.name	= "mx25-tcq",
+		.of_match_table = mx25_tcq_ids,
+	},
+	.probe		= mx25_tcq_probe,
+};
+module_platform_driver(mx25_tcq_driver);
+
+MODULE_DESCRIPTION("TS input driver for Freescale mx25");
+MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/ts4800-ts.c b/drivers/input/touchscreen/ts4800-ts.c
index 3c3dd78303be..fed73eeb47b3 100644
--- a/drivers/input/touchscreen/ts4800-ts.c
+++ b/drivers/input/touchscreen/ts4800-ts.c
@@ -118,6 +118,13 @@ static int ts4800_parse_dt(struct platform_device *pdev,
 		return -ENODEV;
 	}
 
+	ts->regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
+	if (IS_ERR(ts->regmap)) {
+		dev_err(dev, "cannot get parent's regmap\n");
+		return PTR_ERR(ts->regmap);
+	}
+
 	error = of_property_read_u32_index(np, "syscon", 1, &reg);
 	if (error < 0) {
 		dev_err(dev, "no offset in syscon\n");
@@ -134,12 +141,6 @@ static int ts4800_parse_dt(struct platform_device *pdev,
 
 	ts->bit = BIT(bit);
 
-	ts->regmap = syscon_node_to_regmap(syscon_np);
-	if (IS_ERR(ts->regmap)) {
-		dev_err(dev, "cannot get parent's regmap\n");
-		return PTR_ERR(ts->regmap);
-	}
-
 	return 0;
 }
 
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index bab3c6acf6a2..b6fc4bde79de 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -27,7 +27,7 @@ MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-#define W8001_MAX_LENGTH	11
+#define W8001_MAX_LENGTH	13
 #define W8001_LEAD_MASK		0x80
 #define W8001_LEAD_BYTE		0x80
 #define W8001_TAB_MASK		0x40
@@ -155,6 +155,7 @@ static void parse_multi_touch(struct w8001 *w8001)
 		bool touch = data[0] & (1 << i);
 
 		input_mt_slot(dev, i);
+		input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
 		if (touch) {
 			x = (data[6 * i + 1] << 7) | data[6 * i + 2];
 			y = (data[6 * i + 3] << 7) | data[6 * i + 4];
@@ -339,6 +340,15 @@ static irqreturn_t w8001_interrupt(struct serio *serio,
 		w8001->idx = 0;
 		parse_multi_touch(w8001);
 		break;
+
+	default:
+		/*
+		 * ThinkPad X60 Tablet PC (pen only device) sometimes
+		 * sends invalid data packets that are larger than
+		 * W8001_PKTLEN_TPCPEN. Let's start over again.
+		 */
+		if (!w8001->touch_dev && w8001->idx > W8001_PKTLEN_TPCPEN - 1)
+			w8001->idx = 0;
 	}
 
 	return IRQ_HANDLED;
@@ -513,6 +523,8 @@ static int w8001_setup_touch(struct w8001 *w8001, char *basename,
 					0, touch.x, 0, 0);
 		input_set_abs_params(dev, ABS_MT_POSITION_Y,
 					0, touch.y, 0, 0);
+		input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
+					0, MT_TOOL_MAX, 0, 0);
 
 		strlcat(basename, " 2FG", basename_sz);
 		if (w8001->max_pen_x && w8001->max_pen_y)
diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c
index 515c20a6e10f..73861ad22df4 100644
--- a/drivers/input/touchscreen/wdt87xx_i2c.c
+++ b/drivers/input/touchscreen/wdt87xx_i2c.c
@@ -848,7 +848,7 @@ static int wdt87xx_do_update_firmware(struct i2c_client *client,
 	error = wdt87xx_get_sysparam(client, &wdt->param);
 	if (error)
 		dev_err(&client->dev,
-			"failed to refresh system paramaters: %d\n", error);
+			"failed to refresh system parameters: %d\n", error);
 out:
 	enable_irq(client->irq);
 	mutex_unlock(&wdt->fw_mutex);
diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
index 9bbadaaf6bc3..7b3845aa5983 100644
--- a/drivers/input/touchscreen/zforce_ts.c
+++ b/drivers/input/touchscreen/zforce_ts.c
@@ -370,8 +370,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
 			point.coord_x = point.coord_y = 0;
 		}
 
-		point.state = payload[9 * i + 5] & 0x03;
-		point.id = (payload[9 * i + 5] & 0xfc) >> 2;
+		point.state = payload[9 * i + 5] & 0x0f;
+		point.id = (payload[9 * i + 5] & 0xf0) >> 4;
 
 		/* determine touch major, minor and orientation */
 		point.area_major = max(payload[9 * i + 6],