Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "A few small updates to drivers.

  Of note we are now deferring probes of i8042 on some Asus devices as
  the controller is not ready to respond to queries first time around
  when the driver is compiled into the kernel"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312
  Input: atmel_mxt_ts - fix double free in mxt_read_info_block
  Input: goodix - fix memory leak in goodix_firmware_upload
  Input: goodix - add id->model mapping for the "9111" model
  Input: goodix - try not to touch the reset-pin on x86/ACPI devices
  Input: i8042 - enable deferred probe quirk for ASUS UM325UA
  Input: elantech - fix stack out of bound access in elantech_change_report_id()
  Input: iqs626a - prohibit inlining of channel parsing functions
  Input: i8042 - add deferred probe support

5 files changed, 74 insertions, 8 deletions

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 05de92c0293b..eb66cd2689b7 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1882,7 +1882,7 @@ static int mxt_read_info_block(struct mxt_data *data)
 	if (error) {
 		dev_err(&client->dev, "Error %d parsing object table\n", error);
 		mxt_free_object_table(data);
-		goto err_free_mem;
+		return error;
 	}
 
 	data->object_table = (struct mxt_object *)(id_buf + MXT_OBJECT_START);
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 7e13a66a8a95..879a4d984c90 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -117,6 +117,19 @@
 #define ELAN_POWERON_DELAY_USEC	500
 #define ELAN_RESET_DELAY_MSEC	20
 
+/* FW boot code version */
+#define BC_VER_H_BYTE_FOR_EKTH3900x1_I2C        0x72
+#define BC_VER_H_BYTE_FOR_EKTH3900x2_I2C        0x82
+#define BC_VER_H_BYTE_FOR_EKTH3900x3_I2C        0x92
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C        0x6D
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C        0x6E
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C       0x77
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C       0x78
+#define BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB    0x67
+#define BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB    0x68
+#define BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB   0x74
+#define BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB   0x75
+
 enum elants_chip_id {
 	EKTH3500,
 	EKTF3624,
@@ -736,6 +749,37 @@ static int elants_i2c_validate_remark_id(struct elants_data *ts,
 	return 0;
 }
 
+static bool elants_i2c_should_check_remark_id(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	const u8 bootcode_version = ts->iap_version;
+	bool check;
+
+	/* I2C eKTH3900 and eKTH5312 are NOT support Remark ID */
+	if ((bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x1_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x2_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH3900x3_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x1_I2C_USB) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312x2_I2C_USB) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx1_I2C_USB) ||
+	    (bootcode_version == BC_VER_H_BYTE_FOR_EKTH5312cx2_I2C_USB)) {
+		dev_dbg(&client->dev,
+			"eKTH3900/eKTH5312(0x%02x) are not support remark id\n",
+			bootcode_version);
+		check = false;
+	} else if (bootcode_version >= 0x60) {
+		check = true;
+	} else {
+		check = false;
+	}
+
+	return check;
+}
+
 static int elants_i2c_do_update_firmware(struct i2c_client *client,
 					 const struct firmware *fw,
 					 bool force)
@@ -749,7 +793,7 @@ static int elants_i2c_do_update_firmware(struct i2c_client *client,
 	u16 send_id;
 	int page, n_fw_pages;
 	int error;
-	bool check_remark_id = ts->iap_version >= 0x60;
+	bool check_remark_id = elants_i2c_should_check_remark_id(ts);
 
 	/* Recovery mode detection! */
 	if (force) {
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index b5cc91788195..aaa3c455e01e 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -102,6 +102,7 @@ static const struct goodix_chip_id goodix_chip_ids[] = {
 	{ .id = "911", .data = &gt911_chip_data },
 	{ .id = "9271", .data = &gt911_chip_data },
 	{ .id = "9110", .data = &gt911_chip_data },
+	{ .id = "9111", .data = &gt911_chip_data },
 	{ .id = "927", .data = &gt911_chip_data },
 	{ .id = "928", .data = &gt911_chip_data },
 
@@ -650,10 +651,16 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
 
 	usleep_range(6000, 10000);		/* T4: > 5ms */
 
-	/* end select I2C slave addr */
-	error = gpiod_direction_input(ts->gpiod_rst);
-	if (error)
-		goto error;
+	/*
+	 * Put the reset pin back in to input / high-impedance mode to save
+	 * power. Only do this in the non ACPI case since some ACPI boards
+	 * don't have a pull-up, so there the reset pin must stay active-high.
+	 */
+	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) {
+		error = gpiod_direction_input(ts->gpiod_rst);
+		if (error)
+			goto error;
+	}
 
 	return 0;
 
@@ -787,6 +794,14 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		return -EINVAL;
 	}
 
+	/*
+	 * Normally we put the reset pin in input / high-impedance mode to save
+	 * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI
+	 * case, leave the pin as is. This results in the pin not being touched
+	 * at all on x86/ACPI boards, except when needed for error-recover.
+	 */
+	ts->gpiod_rst_flags = GPIOD_ASIS;
+
 	return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping);
 }
 #else
@@ -812,6 +827,12 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 		return -EINVAL;
 	dev = &ts->client->dev;
 
+	/*
+	 * By default we request the reset pin as input, leaving it in
+	 * high-impedance when not resetting the controller to save power.
+	 */
+	ts->gpiod_rst_flags = GPIOD_IN;
+
 	ts->avdd28 = devm_regulator_get(dev, "AVDD28");
 	if (IS_ERR(ts->avdd28)) {
 		error = PTR_ERR(ts->avdd28);
@@ -849,7 +870,7 @@ retry_get_irq_gpio:
 	ts->gpiod_int = gpiod;
 
 	/* Get the reset line GPIO pin number */
-	gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN);
+	gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags);
 	if (IS_ERR(gpiod)) {
 		error = PTR_ERR(gpiod);
 		if (error != -EPROBE_DEFER)
diff --git a/drivers/input/touchscreen/goodix.h b/drivers/input/touchscreen/goodix.h
index 62138f930d1a..02065d1c3263 100644
--- a/drivers/input/touchscreen/goodix.h
+++ b/drivers/input/touchscreen/goodix.h
@@ -87,6 +87,7 @@ struct goodix_ts_data {
 	struct gpio_desc *gpiod_rst;
 	int gpio_count;
 	int gpio_int_idx;
+	enum gpiod_flags gpiod_rst_flags;
 	char id[GOODIX_ID_MAX_LEN + 1];
 	char cfg_name[64];
 	u16 version;
diff --git a/drivers/input/touchscreen/goodix_fwupload.c b/drivers/input/touchscreen/goodix_fwupload.c
index c1e7a2413078..191d4f38d991 100644
--- a/drivers/input/touchscreen/goodix_fwupload.c
+++ b/drivers/input/touchscreen/goodix_fwupload.c
@@ -207,7 +207,7 @@ static int goodix_firmware_upload(struct goodix_ts_data *ts)
 
 	error = goodix_reset_no_int_sync(ts);
 	if (error)
-		return error;
+		goto release;
 
 	error = goodix_enter_upload_mode(ts->client);
 	if (error)