Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...

15 files changed, 2526 insertions, 518 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 0069d9703fda..0ea361f23fa7 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -98,6 +98,18 @@ config TOUCHSCREEN_BITSY
 	  To compile this driver as a module, choose M here: the
 	  module will be called h3600_ts_input.
 
+config TOUCHSCREEN_BU21013
+	tristate "BU21013 based touch panel controllers"
+	depends on I2C
+	help
+	  Say Y here if you have a bu21013 touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bu21013_ts.
+
 config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C
@@ -214,6 +226,16 @@ config TOUCHSCREEN_WACOM_W8001
 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom_w8001.
 
+config TOUCHSCREEN_LPC32XX
+	tristate "LPC32XX touchscreen controller"
+	depends on ARCH_LPC32XX
+	help
+	  Say Y here if you have a LPC32XX device and want
+	  to support the built-in touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lpc32xx_ts.
+
 config TOUCHSCREEN_MCS5000
 	tristate "MELFAS MCS-5000 touchscreen"
 	depends on I2C
@@ -250,6 +272,18 @@ config TOUCHSCREEN_INEXIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called inexio.
 
+config TOUCHSCREEN_INTEL_MID
+	tristate "Intel MID platform resistive touchscreen"
+	depends on INTEL_SCU_IPC
+	help
+	  Say Y here if you have a Intel MID based touchscreen in
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called intel_mid_touch.
+
 config TOUCHSCREEN_MK712
 	tristate "ICS MicroClock MK712 touchscreen"
 	help
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 28217e1dcafd..99b353c4e9ae 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_BU21013)       += bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
@@ -23,6 +24,8 @@ obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
+obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
+obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MCS5000)	+= mcs5000_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MIGOR)		+= migor_ts.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index 5f0221cffef9..a1952fcc083e 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -191,13 +191,12 @@ struct ad7877 {
 	struct spi_message	msg;
 
 	struct mutex		mutex;
-	unsigned		disabled:1;	/* P: mutex */
-	unsigned		gpio3:1;	/* P: mutex */
-	unsigned		gpio4:1;	/* P: mutex */
+	bool			disabled;	/* P: mutex */
+	bool			gpio3;		/* P: mutex */
+	bool			gpio4;		/* P: mutex */
 
 	spinlock_t		lock;
 	struct timer_list	timer;		/* P: lock */
-	unsigned		pending:1;	/* P: lock */
 
 	/*
 	 * DMA (thus cache coherency maintenance) requires the
@@ -206,8 +205,8 @@ struct ad7877 {
 	u16 conversion_data[AD7877_NR_SENSE] ____cacheline_aligned;
 };
 
-static int gpio3;
-module_param(gpio3, int, 0);
+static bool gpio3;
+module_param(gpio3, bool, 0);
 MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3");
 
 /*
@@ -230,6 +229,7 @@ static int ad7877_read(struct spi_device *spi, u16 reg)
 			AD7877_READADD(reg));
 	req->xfer[0].tx_buf = &req->command;
 	req->xfer[0].len = 2;
+	req->xfer[0].cs_change = 1;
 
 	req->xfer[1].rx_buf = &req->sample;
 	req->xfer[1].len = 2;
@@ -295,20 +295,25 @@ static int ad7877_read_adc(struct spi_device *spi, unsigned command)
 
 	req->xfer[0].tx_buf = &req->reset;
 	req->xfer[0].len = 2;
+	req->xfer[0].cs_change = 1;
 
 	req->xfer[1].tx_buf = &req->ref_on;
 	req->xfer[1].len = 2;
 	req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+	req->xfer[1].cs_change = 1;
 
 	req->xfer[2].tx_buf = &req->command;
 	req->xfer[2].len = 2;
 	req->xfer[2].delay_usecs = ts->vref_delay_usecs;
+	req->xfer[2].cs_change = 1;
 
 	req->xfer[3].rx_buf = &req->sample;
 	req->xfer[3].len = 2;
+	req->xfer[3].cs_change = 1;
 
 	req->xfer[4].tx_buf = &ts->cmd_crtl2;	/*REF OFF*/
 	req->xfer[4].len = 2;
+	req->xfer[4].cs_change = 1;
 
 	req->xfer[5].tx_buf = &ts->cmd_crtl1;	/*DEFAULT*/
 	req->xfer[5].len = 2;
@@ -327,7 +332,7 @@ static int ad7877_read_adc(struct spi_device *spi, unsigned command)
 	return status ? : sample;
 }
 
-static void ad7877_rx(struct ad7877 *ts)
+static int ad7877_process_data(struct ad7877 *ts)
 {
 	struct input_dev *input_dev = ts->input;
 	unsigned Rt;
@@ -354,11 +359,25 @@ static void ad7877_rx(struct ad7877 *ts)
 		Rt /= z1;
 		Rt = (Rt + 2047) >> 12;
 
+		/*
+		 * Sample found inconsistent, pressure is beyond
+		 * the maximum. Don't report it to user space.
+		 */
+		if (Rt > ts->pressure_max)
+			return -EINVAL;
+
+		if (!timer_pending(&ts->timer))
+			input_report_key(input_dev, BTN_TOUCH, 1);
+
 		input_report_abs(input_dev, ABS_X, x);
 		input_report_abs(input_dev, ABS_Y, y);
 		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		input_sync(input_dev);
+
+		return 0;
 	}
+
+	return -EINVAL;
 }
 
 static inline void ad7877_ts_event_release(struct ad7877 *ts)
@@ -366,72 +385,56 @@ static inline void ad7877_ts_event_release(struct ad7877 *ts)
 	struct input_dev *input_dev = ts->input;
 
 	input_report_abs(input_dev, ABS_PRESSURE, 0);
+	input_report_key(input_dev, BTN_TOUCH, 0);
 	input_sync(input_dev);
 }
 
 static void ad7877_timer(unsigned long handle)
 {
 	struct ad7877 *ts = (void *)handle;
+	unsigned long flags;
 
+	spin_lock_irqsave(&ts->lock, flags);
 	ad7877_ts_event_release(ts);
+	spin_unlock_irqrestore(&ts->lock, flags);
 }
 
 static irqreturn_t ad7877_irq(int irq, void *handle)
 {
 	struct ad7877 *ts = handle;
 	unsigned long flags;
-	int status;
+	int error;
 
-	/*
-	 * The repeated conversion sequencer controlled by TMR kicked off
-	 * too fast. We ignore the last and process the sample sequence
-	 * currently in the queue. It can't be older than 9.4ms, and we
-	 * need to avoid that ts->msg doesn't get issued twice while in work.
-	 */
+	error = spi_sync(ts->spi, &ts->msg);
+	if (error) {
+		dev_err(&ts->spi->dev, "spi_sync --> %d\n", error);
+		goto out;
+	}
 
 	spin_lock_irqsave(&ts->lock, flags);
-	if (!ts->pending) {
-		ts->pending = 1;
-
-		status = spi_async(ts->spi, &ts->msg);
-		if (status)
-			dev_err(&ts->spi->dev, "spi_sync --> %d\n", status);
-	}
+	error = ad7877_process_data(ts);
+	if (!error)
+		mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
 	spin_unlock_irqrestore(&ts->lock, flags);
 
+out:
 	return IRQ_HANDLED;
 }
 
-static void ad7877_callback(void *_ts)
-{
-	struct ad7877 *ts = _ts;
-
-	spin_lock_irq(&ts->lock);
-
-	ad7877_rx(ts);
-	ts->pending = 0;
-	mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
-
-	spin_unlock_irq(&ts->lock);
-}
-
 static void ad7877_disable(struct ad7877 *ts)
 {
 	mutex_lock(&ts->mutex);
 
 	if (!ts->disabled) {
-		ts->disabled = 1;
+		ts->disabled = true;
 		disable_irq(ts->spi->irq);
 
-		/* Wait for spi_async callback */
-		while (ts->pending)
-			msleep(1);
-
 		if (del_timer_sync(&ts->timer))
 			ad7877_ts_event_release(ts);
 	}
 
-	/* we know the chip's in lowpower mode since we always
+	/*
+	 * We know the chip's in lowpower mode since we always
 	 * leave it that way after every request
 	 */
 
@@ -443,7 +446,7 @@ static void ad7877_enable(struct ad7877 *ts)
 	mutex_lock(&ts->mutex);
 
 	if (ts->disabled) {
-		ts->disabled = 0;
+		ts->disabled = false;
 		enable_irq(ts->spi->irq);
 	}
 
@@ -453,7 +456,7 @@ static void ad7877_enable(struct ad7877 *ts)
 #define SHOW(name) static ssize_t \
 name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
 { \
-	struct ad7877	*ts = dev_get_drvdata(dev); \
+	struct ad7877 *ts = dev_get_drvdata(dev); \
 	ssize_t v = ad7877_read_adc(ts->spi, \
 			AD7877_READ_CHAN(name)); \
 	if (v < 0) \
@@ -473,7 +476,7 @@ SHOW(temp2)
 static ssize_t ad7877_disable_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct ad7877	*ts = dev_get_drvdata(dev);
+	struct ad7877 *ts = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%u\n", ts->disabled);
 }
@@ -503,7 +506,7 @@ static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store);
 static ssize_t ad7877_dac_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct ad7877	*ts = dev_get_drvdata(dev);
+	struct ad7877 *ts = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%u\n", ts->dac);
 }
@@ -533,7 +536,7 @@ static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store);
 static ssize_t ad7877_gpio3_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct ad7877	*ts = dev_get_drvdata(dev);
+	struct ad7877 *ts = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%u\n", ts->gpio3);
 }
@@ -564,7 +567,7 @@ static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store);
 static ssize_t ad7877_gpio4_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct ad7877	*ts = dev_get_drvdata(dev);
+	struct ad7877 *ts = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%u\n", ts->gpio4);
 }
@@ -597,16 +600,35 @@ static struct attribute *ad7877_attributes[] = {
 	&dev_attr_temp2.attr,
 	&dev_attr_aux1.attr,
 	&dev_attr_aux2.attr,
+	&dev_attr_aux3.attr,
 	&dev_attr_bat1.attr,
 	&dev_attr_bat2.attr,
 	&dev_attr_disable.attr,
 	&dev_attr_dac.attr,
+	&dev_attr_gpio3.attr,
 	&dev_attr_gpio4.attr,
 	NULL
 };
 
+static mode_t ad7877_attr_is_visible(struct kobject *kobj,
+				     struct attribute *attr, int n)
+{
+	mode_t mode = attr->mode;
+
+	if (attr == &dev_attr_aux3.attr) {
+		if (gpio3)
+			mode = 0;
+	} else if (attr == &dev_attr_gpio3.attr) {
+		if (!gpio3)
+			mode = 0;
+	}
+
+	return mode;
+}
+
 static const struct attribute_group ad7877_attr_group = {
-	.attrs = ad7877_attributes,
+	.is_visible	= ad7877_attr_is_visible,
+	.attrs		= ad7877_attributes,
 };
 
 static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts)
@@ -635,22 +657,25 @@ static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts)
 
 	spi_message_init(m);
 
-	m->complete = ad7877_callback;
 	m->context = ts;
 
 	ts->xfer[0].tx_buf = &ts->cmd_crtl1;
 	ts->xfer[0].len = 2;
+	ts->xfer[0].cs_change = 1;
 
 	spi_message_add_tail(&ts->xfer[0], m);
 
 	ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */
 	ts->xfer[1].len = 2;
+	ts->xfer[1].cs_change = 1;
 
 	spi_message_add_tail(&ts->xfer[1], m);
 
-	for (i = 0; i < 11; i++) {
+	for (i = 0; i < AD7877_NR_SENSE; i++) {
 		ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i];
 		ts->xfer[i + 2].len = 2;
+		if (i < (AD7877_NR_SENSE - 1))
+			ts->xfer[i + 2].cs_change = 1;
 		spi_message_add_tail(&ts->xfer[i + 2], m);
 	}
 }
@@ -718,6 +743,8 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 	input_dev->phys = ts->phys;
 	input_dev->dev.parent = &spi->dev;
 
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(ABS_X, input_dev->absbit);
 	__set_bit(ABS_Y, input_dev->absbit);
@@ -752,8 +779,9 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 
 	/* Request AD7877 /DAV GPIO interrupt */
 
-	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
-			spi->dev.driver->name, ts);
+	err = request_threaded_irq(spi->irq, NULL, ad7877_irq,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   spi->dev.driver->name, ts);
 	if (err) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		goto err_free_mem;
@@ -763,20 +791,12 @@ static int __devinit ad7877_probe(struct spi_device *spi)
 	if (err)
 		goto err_free_irq;
 
-	err = device_create_file(&spi->dev,
-				 gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
-	if (err)
-		goto err_remove_attr_group;
-
 	err = input_register_device(input_dev);
 	if (err)
-		goto err_remove_attr;
+		goto err_remove_attr_group;
 
 	return 0;
 
-err_remove_attr:
-	device_remove_file(&spi->dev,
-			   gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
 err_remove_attr_group:
 	sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
 err_free_irq:
@@ -790,11 +810,9 @@ err_free_mem:
 
 static int __devexit ad7877_remove(struct spi_device *spi)
 {
-	struct ad7877		*ts = dev_get_drvdata(&spi->dev);
+	struct ad7877 *ts = dev_get_drvdata(&spi->dev);
 
 	sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
-	device_remove_file(&spi->dev,
-			   gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
 
 	ad7877_disable(ts);
 	free_irq(ts->spi->irq, ts);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 16031933a8f6..14ea54b78e46 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -17,9 +17,11 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
+#include <linux/types.h>
 #include <linux/hwmon.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
@@ -52,22 +54,23 @@
  * files.
  */
 
-#define TS_POLL_DELAY	(1 * 1000000)	/* ns delay before the first sample */
-#define TS_POLL_PERIOD	(5 * 1000000)	/* ns delay between samples */
+#define TS_POLL_DELAY	1	/* ms delay before the first sample */
+#define TS_POLL_PERIOD	5	/* ms delay between samples */
 
 /* this driver doesn't aim at the peak continuous sample rate */
 #define	SAMPLE_BITS	(8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
 
 struct ts_event {
-	/* For portability, we can't read 12 bit values using SPI (which
-	 * would make the controller deliver them as native byteorder u16
+	/*
+	 * For portability, we can't read 12 bit values using SPI (which
+	 * would make the controller deliver them as native byte order u16
 	 * with msbs zeroed).  Instead, we read them as two 8-bit values,
 	 * *** WHICH NEED BYTESWAPPING *** and range adjustment.
 	 */
 	u16	x;
 	u16	y;
 	u16	z1, z2;
-	int	ignore;
+	bool	ignore;
 	u8	x_buf[3];
 	u8	y_buf[3];
 };
@@ -110,8 +113,11 @@ struct ads7846 {
 
 	struct spi_transfer	xfer[18];
 	struct spi_message	msg[5];
-	struct spi_message	*last_msg;
-	int			msg_idx;
+	int			msg_count;
+	wait_queue_head_t	wait;
+
+	bool			pendown;
+
 	int			read_cnt;
 	int			read_rep;
 	int			last_read;
@@ -122,14 +128,10 @@ struct ads7846 {
 
 	u16			penirq_recheck_delay_usecs;
 
-	spinlock_t		lock;
-	struct hrtimer		timer;
-	unsigned		pendown:1;	/* P: lock */
-	unsigned		pending:1;	/* P: lock */
-// FIXME remove "irq_disabled"
-	unsigned		irq_disabled:1;	/* P: lock */
-	unsigned		disabled:1;
-	unsigned		is_suspended:1;
+	struct mutex		lock;
+	bool			stopped;	/* P: lock */
+	bool			disabled;	/* P: lock */
+	bool			suspended;	/* P: lock */
 
 	int			(*filter)(void *data, int data_idx, int *val);
 	void			*filter_data;
@@ -165,7 +167,7 @@ struct ads7846 {
 #define	ADS_12_BIT		(0 << 3)
 #define	ADS_SER			(1 << 2)	/* non-differential */
 #define	ADS_DFR			(0 << 2)	/* differential */
-#define	ADS_PD10_PDOWN		(0 << 0)	/* lowpower mode + penirq */
+#define	ADS_PD10_PDOWN		(0 << 0)	/* low power mode + penirq */
 #define	ADS_PD10_ADC_ON		(1 << 0)	/* ADC on */
 #define	ADS_PD10_REF_ON		(2 << 0)	/* vREF on + penirq */
 #define	ADS_PD10_ALL_ON		(3 << 0)	/* ADC + vREF on */
@@ -193,6 +195,78 @@ struct ads7846 {
 #define	REF_ON	(READ_12BIT_DFR(x, 1, 1))
 #define	REF_OFF	(READ_12BIT_DFR(y, 0, 0))
 
+/* Must be called with ts->lock held */
+static void ads7846_stop(struct ads7846 *ts)
+{
+	if (!ts->disabled && !ts->suspended) {
+		/* Signal IRQ thread to stop polling and disable the handler. */
+		ts->stopped = true;
+		mb();
+		wake_up(&ts->wait);
+		disable_irq(ts->spi->irq);
+	}
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_restart(struct ads7846 *ts)
+{
+	if (!ts->disabled && !ts->suspended) {
+		/* Tell IRQ thread that it may poll the device. */
+		ts->stopped = false;
+		mb();
+		enable_irq(ts->spi->irq);
+	}
+}
+
+/* Must be called with ts->lock held */
+static void __ads7846_disable(struct ads7846 *ts)
+{
+	ads7846_stop(ts);
+	regulator_disable(ts->reg);
+
+	/*
+	 * We know the chip's in low power mode since we always
+	 * leave it that way after every request
+	 */
+}
+
+/* Must be called with ts->lock held */
+static void __ads7846_enable(struct ads7846 *ts)
+{
+	regulator_enable(ts->reg);
+	ads7846_restart(ts);
+}
+
+static void ads7846_disable(struct ads7846 *ts)
+{
+	mutex_lock(&ts->lock);
+
+	if (!ts->disabled) {
+
+		if  (!ts->suspended)
+			__ads7846_disable(ts);
+
+		ts->disabled = true;
+	}
+
+	mutex_unlock(&ts->lock);
+}
+
+static void ads7846_enable(struct ads7846 *ts)
+{
+	mutex_lock(&ts->lock);
+
+	if (ts->disabled) {
+
+		ts->disabled = false;
+
+		if (!ts->suspended)
+			__ads7846_enable(ts);
+	}
+
+	mutex_unlock(&ts->lock);
+}
+
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -219,23 +293,15 @@ struct ads7845_ser_req {
 	struct spi_transfer	xfer[2];
 };
 
-static void ads7846_enable(struct ads7846 *ts);
-static void ads7846_disable(struct ads7846 *ts);
-
-static int device_suspended(struct device *dev)
-{
-	struct ads7846 *ts = dev_get_drvdata(dev);
-	return ts->is_suspended || ts->disabled;
-}
-
 static int ads7846_read12_ser(struct device *dev, unsigned command)
 {
-	struct spi_device	*spi = to_spi_device(dev);
-	struct ads7846		*ts = dev_get_drvdata(dev);
-	struct ser_req		*req = kzalloc(sizeof *req, GFP_KERNEL);
-	int			status;
-	int			use_internal;
+	struct spi_device *spi = to_spi_device(dev);
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	struct ser_req *req;
+	int status;
+	int use_internal;
 
+	req = kzalloc(sizeof *req, GFP_KERNEL);
 	if (!req)
 		return -ENOMEM;
 
@@ -282,11 +348,11 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	CS_CHANGE(req->xfer[5]);
 	spi_message_add_tail(&req->xfer[5], &req->msg);
 
-	ts->irq_disabled = 1;
-	disable_irq(spi->irq);
+	mutex_lock(&ts->lock);
+	ads7846_stop(ts);
 	status = spi_sync(spi, &req->msg);
-	ts->irq_disabled = 0;
-	enable_irq(spi->irq);
+	ads7846_restart(ts);
+	mutex_unlock(&ts->lock);
 
 	if (status == 0) {
 		/* on-wire is a must-ignore bit, a BE12 value, then padding */
@@ -301,11 +367,12 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 
 static int ads7845_read12_ser(struct device *dev, unsigned command)
 {
-	struct spi_device	*spi = to_spi_device(dev);
-	struct ads7846		*ts = dev_get_drvdata(dev);
-	struct ads7845_ser_req	*req = kzalloc(sizeof *req, GFP_KERNEL);
-	int			status;
+	struct spi_device *spi = to_spi_device(dev);
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	struct ads7845_ser_req *req;
+	int status;
 
+	req = kzalloc(sizeof *req, GFP_KERNEL);
 	if (!req)
 		return -ENOMEM;
 
@@ -317,11 +384,11 @@ static int ads7845_read12_ser(struct device *dev, unsigned command)
 	req->xfer[0].len = 3;
 	spi_message_add_tail(&req->xfer[0], &req->msg);
 
-	ts->irq_disabled = 1;
-	disable_irq(spi->irq);
+	mutex_lock(&ts->lock);
+	ads7846_stop(ts);
 	status = spi_sync(spi, &req->msg);
-	ts->irq_disabled = 0;
-	enable_irq(spi->irq);
+	ads7846_restart(ts);
+	mutex_unlock(&ts->lock);
 
 	if (status == 0) {
 		/* BE12 value, then padding */
@@ -374,6 +441,7 @@ static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
 	/* external resistors may scale vAUX into 0..vREF */
 	retval *= ts->vref_mv;
 	retval = retval >> 12;
+
 	return retval;
 }
 
@@ -384,13 +452,13 @@ static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
 	/* ads7846 has a resistor ladder to scale this signal down */
 	if (ts->model == 7846)
 		retval *= 4;
+
 	return retval;
 }
 
 SHOW(in0_input, vaux, vaux_adjust)
 SHOW(in1_input, vbatt, vbatt_adjust)
 
-
 static struct attribute *ads7846_attributes[] = {
 	&dev_attr_temp0.attr,
 	&dev_attr_temp1.attr,
@@ -498,17 +566,12 @@ static inline void ads784x_hwmon_unregister(struct spi_device *spi,
 }
 #endif
 
-static int is_pen_down(struct device *dev)
-{
-	struct ads7846	*ts = dev_get_drvdata(dev);
-
-	return ts->pendown;
-}
-
 static ssize_t ads7846_pen_down_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%u\n", is_pen_down(dev));
+	struct ads7846 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->pendown);
 }
 
 static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
@@ -516,7 +579,7 @@ static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
 static ssize_t ads7846_disable_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct ads7846	*ts = dev_get_drvdata(dev);
+	struct ads7846 *ts = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%u\n", ts->disabled);
 }
@@ -531,15 +594,11 @@ static ssize_t ads7846_disable_store(struct device *dev,
 	if (strict_strtoul(buf, 10, &i))
 		return -EINVAL;
 
-	spin_lock_irq(&ts->lock);
-
 	if (i)
 		ads7846_disable(ts);
 	else
 		ads7846_enable(ts);
 
-	spin_unlock_irq(&ts->lock);
-
 	return count;
 }
 
@@ -569,23 +628,141 @@ static void null_wait_for_sync(void)
 {
 }
 
-/*
- * PENIRQ only kicks the timer.  The timer only reissues the SPI transfer,
- * to retrieve touchscreen status.
- *
- * The SPI transfer completion callback does the real work.  It reports
- * touchscreen events and reactivates the timer (or IRQ) as appropriate.
- */
+static int ads7846_debounce_filter(void *ads, int data_idx, int *val)
+{
+	struct ads7846 *ts = ads;
+
+	if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
+		/* Start over collecting consistent readings. */
+		ts->read_rep = 0;
+		/*
+		 * Repeat it, if this was the first read or the read
+		 * wasn't consistent enough.
+		 */
+		if (ts->read_cnt < ts->debounce_max) {
+			ts->last_read = *val;
+			ts->read_cnt++;
+			return ADS7846_FILTER_REPEAT;
+		} else {
+			/*
+			 * Maximum number of debouncing reached and still
+			 * not enough number of consistent readings. Abort
+			 * the whole sample, repeat it in the next sampling
+			 * period.
+			 */
+			ts->read_cnt = 0;
+			return ADS7846_FILTER_IGNORE;
+		}
+	} else {
+		if (++ts->read_rep > ts->debounce_rep) {
+			/*
+			 * Got a good reading for this coordinate,
+			 * go for the next one.
+			 */
+			ts->read_cnt = 0;
+			ts->read_rep = 0;
+			return ADS7846_FILTER_OK;
+		} else {
+			/* Read more values that are consistent. */
+			ts->read_cnt++;
+			return ADS7846_FILTER_REPEAT;
+		}
+	}
+}
+
+static int ads7846_no_filter(void *ads, int data_idx, int *val)
+{
+	return ADS7846_FILTER_OK;
+}
+
+static int ads7846_get_value(struct ads7846 *ts, struct spi_message *m)
+{
+	struct spi_transfer *t =
+		list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+
+	if (ts->model == 7845) {
+		return be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3;
+	} else {
+		/*
+		 * adjust:  on-wire is a must-ignore bit, a BE12 value, then
+		 * padding; built from two 8 bit values written msb-first.
+		 */
+		return be16_to_cpup((__be16 *)t->rx_buf) >> 3;
+	}
+}
+
+static void ads7846_update_value(struct spi_message *m, int val)
+{
+	struct spi_transfer *t =
+		list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+
+	*(u16 *)t->rx_buf = val;
+}
+
+static void ads7846_read_state(struct ads7846 *ts)
+{
+	struct ads7846_packet *packet = ts->packet;
+	struct spi_message *m;
+	int msg_idx = 0;
+	int val;
+	int action;
+	int error;
+
+	while (msg_idx < ts->msg_count) {
+
+		ts->wait_for_sync();
+
+		m = &ts->msg[msg_idx];
+		error = spi_sync(ts->spi, m);
+		if (error) {
+			dev_err(&ts->spi->dev, "spi_async --> %d\n", error);
+			packet->tc.ignore = true;
+			return;
+		}
+
+		/*
+		 * Last message is power down request, no need to convert
+		 * or filter the value.
+		 */
+		if (msg_idx < ts->msg_count - 1) {
 
-static void ads7846_rx(void *ads)
+			val = ads7846_get_value(ts, m);
+
+			action = ts->filter(ts->filter_data, msg_idx, &val);
+			switch (action) {
+			case ADS7846_FILTER_REPEAT:
+				continue;
+
+			case ADS7846_FILTER_IGNORE:
+				packet->tc.ignore = true;
+				msg_idx = ts->msg_count - 1;
+				continue;
+
+			case ADS7846_FILTER_OK:
+				ads7846_update_value(m, val);
+				packet->tc.ignore = false;
+				msg_idx++;
+				break;
+
+			default:
+				BUG();
+			}
+		} else {
+			msg_idx++;
+		}
+	}
+}
+
+static void ads7846_report_state(struct ads7846 *ts)
 {
-	struct ads7846		*ts = ads;
-	struct ads7846_packet	*packet = ts->packet;
-	unsigned		Rt;
-	u16			x, y, z1, z2;
+	struct ads7846_packet *packet = ts->packet;
+	unsigned int Rt;
+	u16 x, y, z1, z2;
 
-	/* ads7846_rx_val() did in-place conversion (including byteswap) from
-	 * on-the-wire format as part of debouncing to get stable readings.
+	/*
+	 * ads7846_get_value() does in-place conversion (including byte swap)
+	 * from on-the-wire format as part of debouncing to get stable
+	 * readings.
 	 */
 	if (ts->model == 7845) {
 		x = *(u16 *)packet->tc.x_buf;
@@ -623,19 +800,19 @@ static void ads7846_rx(void *ads)
 		Rt = 0;
 	}
 
-	/* Sample found inconsistent by debouncing or pressure is beyond
+	/*
+	 * Sample found inconsistent by debouncing or pressure is beyond
 	 * the maximum. Don't report it to user space, repeat at least
 	 * once more the measurement
 	 */
 	if (packet->tc.ignore || Rt > ts->pressure_max) {
 		dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n",
 			 packet->tc.ignore, Rt);
-		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
-			      HRTIMER_MODE_REL);
 		return;
 	}
 
-	/* Maybe check the pendown state before reporting. This discards
+	/*
+	 * Maybe check the pendown state before reporting. This discards
 	 * false readings when the pen is lifted.
 	 */
 	if (ts->penirq_recheck_delay_usecs) {
@@ -644,8 +821,9 @@ static void ads7846_rx(void *ads)
 			Rt = 0;
 	}
 
-	/* NOTE: We can't rely on the pressure to determine the pen down
-	 * state, even this controller has a pressure sensor.  The pressure
+	/*
+	 * NOTE: We can't rely on the pressure to determine the pen down
+	 * state, even this controller has a pressure sensor. The pressure
 	 * value can fluctuate for quite a while after lifting the pen and
 	 * in some cases may not even settle at the expected value.
 	 *
@@ -655,15 +833,15 @@ static void ads7846_rx(void *ads)
 	if (Rt) {
 		struct input_dev *input = ts->input;
 
+		if (ts->swap_xy)
+			swap(x, y);
+
 		if (!ts->pendown) {
 			input_report_key(input, BTN_TOUCH, 1);
-			ts->pendown = 1;
+			ts->pendown = true;
 			dev_vdbg(&ts->spi->dev, "DOWN\n");
 		}
 
-		if (ts->swap_xy)
-			swap(x, y);
-
 		input_report_abs(input, ABS_X, x);
 		input_report_abs(input, ABS_Y, y);
 		input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
@@ -671,246 +849,94 @@ static void ads7846_rx(void *ads)
 		input_sync(input);
 		dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
 	}
-
-	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
-			HRTIMER_MODE_REL);
-}
-
-static int ads7846_debounce(void *ads, int data_idx, int *val)
-{
-	struct ads7846		*ts = ads;
-
-	if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
-		/* Start over collecting consistent readings. */
-		ts->read_rep = 0;
-		/* Repeat it, if this was the first read or the read
-		 * wasn't consistent enough. */
-		if (ts->read_cnt < ts->debounce_max) {
-			ts->last_read = *val;
-			ts->read_cnt++;
-			return ADS7846_FILTER_REPEAT;
-		} else {
-			/* Maximum number of debouncing reached and still
-			 * not enough number of consistent readings. Abort
-			 * the whole sample, repeat it in the next sampling
-			 * period.
-			 */
-			ts->read_cnt = 0;
-			return ADS7846_FILTER_IGNORE;
-		}
-	} else {
-		if (++ts->read_rep > ts->debounce_rep) {
-			/* Got a good reading for this coordinate,
-			 * go for the next one. */
-			ts->read_cnt = 0;
-			ts->read_rep = 0;
-			return ADS7846_FILTER_OK;
-		} else {
-			/* Read more values that are consistent. */
-			ts->read_cnt++;
-			return ADS7846_FILTER_REPEAT;
-		}
-	}
 }
 
-static int ads7846_no_filter(void *ads, int data_idx, int *val)
+static irqreturn_t ads7846_hard_irq(int irq, void *handle)
 {
-	return ADS7846_FILTER_OK;
-}
-
-static void ads7846_rx_val(void *ads)
-{
-	struct ads7846 *ts = ads;
-	struct ads7846_packet *packet = ts->packet;
-	struct spi_message *m;
-	struct spi_transfer *t;
-	int val;
-	int action;
-	int status;
-
-	m = &ts->msg[ts->msg_idx];
-	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-
-	if (ts->model == 7845) {
-		val = be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3;
-	} else {
-		/* adjust:  on-wire is a must-ignore bit, a BE12 value, then
-		 * padding; built from two 8 bit values written msb-first.
-		 */
-		val = be16_to_cpup((__be16 *)t->rx_buf) >> 3;
-	}
+	struct ads7846 *ts = handle;
 
-	action = ts->filter(ts->filter_data, ts->msg_idx, &val);
-	switch (action) {
-	case ADS7846_FILTER_REPEAT:
-		break;
-	case ADS7846_FILTER_IGNORE:
-		packet->tc.ignore = 1;
-		/* Last message will contain ads7846_rx() as the
-		 * completion function.
-		 */
-		m = ts->last_msg;
-		break;
-	case ADS7846_FILTER_OK:
-		*(u16 *)t->rx_buf = val;
-		packet->tc.ignore = 0;
-		m = &ts->msg[++ts->msg_idx];
-		break;
-	default:
-		BUG();
-	}
-	ts->wait_for_sync();
-	status = spi_async(ts->spi, m);
-	if (status)
-		dev_err(&ts->spi->dev, "spi_async --> %d\n",
-				status);
+	return get_pendown_state(ts) ? IRQ_WAKE_THREAD : IRQ_HANDLED;
 }
 
-static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
-{
-	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
-	int		status = 0;
-
-	spin_lock(&ts->lock);
-
-	if (unlikely(!get_pendown_state(ts) ||
-		     device_suspended(&ts->spi->dev))) {
-		if (ts->pendown) {
-			struct input_dev *input = ts->input;
-
-			input_report_key(input, BTN_TOUCH, 0);
-			input_report_abs(input, ABS_PRESSURE, 0);
-			input_sync(input);
-
-			ts->pendown = 0;
-			dev_vdbg(&ts->spi->dev, "UP\n");
-		}
-
-		/* measurement cycle ended */
-		if (!device_suspended(&ts->spi->dev)) {
-			ts->irq_disabled = 0;
-			enable_irq(ts->spi->irq);
-		}
-		ts->pending = 0;
-	} else {
-		/* pen is still down, continue with the measurement */
-		ts->msg_idx = 0;
-		ts->wait_for_sync();
-		status = spi_async(ts->spi, &ts->msg[0]);
-		if (status)
-			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
-	}
-
-	spin_unlock(&ts->lock);
-	return HRTIMER_NORESTART;
-}
 
 static irqreturn_t ads7846_irq(int irq, void *handle)
 {
 	struct ads7846 *ts = handle;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ts->lock, flags);
-	if (likely(get_pendown_state(ts))) {
-		if (!ts->irq_disabled) {
-			/* The ARM do_simple_IRQ() dispatcher doesn't act
-			 * like the other dispatchers:  it will report IRQs
-			 * even after they've been disabled.  We work around
-			 * that here.  (The "generic irq" framework may help...)
-			 */
-			ts->irq_disabled = 1;
-			disable_irq_nosync(ts->spi->irq);
-			ts->pending = 1;
-			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
-					HRTIMER_MODE_REL);
-		}
-	}
-	spin_unlock_irqrestore(&ts->lock, flags);
 
-	return IRQ_HANDLED;
-}
+	/* Start with a small delay before checking pendown state */
+	msleep(TS_POLL_DELAY);
 
-/*--------------------------------------------------------------------------*/
+	while (!ts->stopped && get_pendown_state(ts)) {
 
-/* Must be called with ts->lock held */
-static void ads7846_disable(struct ads7846 *ts)
-{
-	if (ts->disabled)
-		return;
+		/* pen is down, continue with the measurement */
+		ads7846_read_state(ts);
 
-	ts->disabled = 1;
+		if (!ts->stopped)
+			ads7846_report_state(ts);
 
-	/* are we waiting for IRQ, or polling? */
-	if (!ts->pending) {
-		ts->irq_disabled = 1;
-		disable_irq(ts->spi->irq);
-	} else {
-		/* the timer will run at least once more, and
-		 * leave everything in a clean state, IRQ disabled
-		 */
-		while (ts->pending) {
-			spin_unlock_irq(&ts->lock);
-			msleep(1);
-			spin_lock_irq(&ts->lock);
-		}
+		wait_event_timeout(ts->wait, ts->stopped,
+				   msecs_to_jiffies(TS_POLL_PERIOD));
 	}
 
-	regulator_disable(ts->reg);
-
-	/* we know the chip's in lowpower mode since we always
-	 * leave it that way after every request
-	 */
-}
+	if (ts->pendown) {
+		struct input_dev *input = ts->input;
 
-/* Must be called with ts->lock held */
-static void ads7846_enable(struct ads7846 *ts)
-{
-	if (!ts->disabled)
-		return;
+		input_report_key(input, BTN_TOUCH, 0);
+		input_report_abs(input, ABS_PRESSURE, 0);
+		input_sync(input);
 
-	regulator_enable(ts->reg);
+		ts->pendown = false;
+		dev_vdbg(&ts->spi->dev, "UP\n");
+	}
 
-	ts->disabled = 0;
-	ts->irq_disabled = 0;
-	enable_irq(ts->spi->irq);
+	return IRQ_HANDLED;
 }
 
 static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-	spin_lock_irq(&ts->lock);
+	mutex_lock(&ts->lock);
 
-	ts->is_suspended = 1;
-	ads7846_disable(ts);
+	if (!ts->suspended) {
 
-	spin_unlock_irq(&ts->lock);
+		if (!ts->disabled)
+			__ads7846_disable(ts);
 
-	if (device_may_wakeup(&ts->spi->dev))
-		enable_irq_wake(ts->spi->irq);
+		if (device_may_wakeup(&ts->spi->dev))
+			enable_irq_wake(ts->spi->irq);
 
-	return 0;
+		ts->suspended = true;
+	}
+
+	mutex_unlock(&ts->lock);
 
+	return 0;
 }
 
 static int ads7846_resume(struct spi_device *spi)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-	if (device_may_wakeup(&ts->spi->dev))
-		disable_irq_wake(ts->spi->irq);
+	mutex_lock(&ts->lock);
+
+	if (ts->suspended) {
 
-	spin_lock_irq(&ts->lock);
+		ts->suspended = false;
 
-	ts->is_suspended = 0;
-	ads7846_enable(ts);
+		if (device_may_wakeup(&ts->spi->dev))
+			disable_irq_wake(ts->spi->irq);
 
-	spin_unlock_irq(&ts->lock);
+		if (!ts->disabled)
+			__ads7846_enable(ts);
+	}
+
+	mutex_unlock(&ts->lock);
 
 	return 0;
 }
 
-static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts)
 {
 	struct ads7846_platform_data *pdata = spi->dev.platform_data;
 	int err;
@@ -932,146 +958,40 @@ static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
 	err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
 	if (err) {
 		dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
-				pdata->gpio_pendown);
+			pdata->gpio_pendown);
 		return err;
 	}
 
 	ts->gpio_pendown = pdata->gpio_pendown;
+
 	return 0;
 }
 
-static int __devinit ads7846_probe(struct spi_device *spi)
+/*
+ * Set up the transfers to read touchscreen state; this assumes we
+ * use formula #2 for pressure, not #3.
+ */
+static void __devinit ads7846_setup_spi_msg(struct ads7846 *ts,
+				const struct ads7846_platform_data *pdata)
 {
-	struct ads7846 *ts;
-	struct ads7846_packet *packet;
-	struct input_dev *input_dev;
-	const struct ads7846_platform_data *pdata = spi->dev.platform_data;
-	struct spi_message *m;
-	struct spi_transfer *x;
-	unsigned long irq_flags;
-	int vref;
-	int err;
-
-	if (!spi->irq) {
-		dev_dbg(&spi->dev, "no IRQ?\n");
-		return -ENODEV;
-	}
-
-	if (!pdata) {
-		dev_dbg(&spi->dev, "no platform data?\n");
-		return -ENODEV;
-	}
-
-	/* don't exceed max specified sample rate */
-	if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
-		dev_dbg(&spi->dev, "f(sample) %d KHz?\n",
-				(spi->max_speed_hz/SAMPLE_BITS)/1000);
-		return -EINVAL;
-	}
-
-	/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
-	 * that even if the hardware can do that, the SPI controller driver
-	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
-	 */
-	spi->bits_per_word = 8;
-	spi->mode = SPI_MODE_0;
-	err = spi_setup(spi);
-	if (err < 0)
-		return err;
-
-	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
-	packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ts || !packet || !input_dev) {
-		err = -ENOMEM;
-		goto err_free_mem;
-	}
-
-	dev_set_drvdata(&spi->dev, ts);
-
-	ts->packet = packet;
-	ts->spi = spi;
-	ts->input = input_dev;
-	ts->vref_mv = pdata->vref_mv;
-	ts->swap_xy = pdata->swap_xy;
-
-	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	ts->timer.function = ads7846_timer;
-
-	spin_lock_init(&ts->lock);
-
-	ts->model = pdata->model ? : 7846;
-	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
-	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
-	ts->pressure_max = pdata->pressure_max ? : ~0;
-
-	if (pdata->filter != NULL) {
-		if (pdata->filter_init != NULL) {
-			err = pdata->filter_init(pdata, &ts->filter_data);
-			if (err < 0)
-				goto err_free_mem;
-		}
-		ts->filter = pdata->filter;
-		ts->filter_cleanup = pdata->filter_cleanup;
-	} else if (pdata->debounce_max) {
-		ts->debounce_max = pdata->debounce_max;
-		if (ts->debounce_max < 2)
-			ts->debounce_max = 2;
-		ts->debounce_tol = pdata->debounce_tol;
-		ts->debounce_rep = pdata->debounce_rep;
-		ts->filter = ads7846_debounce;
-		ts->filter_data = ts;
-	} else
-		ts->filter = ads7846_no_filter;
-
-	err = setup_pendown(spi, ts);
-	if (err)
-		goto err_cleanup_filter;
-
-	if (pdata->penirq_recheck_delay_usecs)
-		ts->penirq_recheck_delay_usecs =
-				pdata->penirq_recheck_delay_usecs;
-
-	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
-
-	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
-	snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
-
-	input_dev->name = ts->name;
-	input_dev->phys = ts->phys;
-	input_dev->dev.parent = &spi->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-	input_set_abs_params(input_dev, ABS_X,
-			pdata->x_min ? : 0,
-			pdata->x_max ? : MAX_12BIT,
-			0, 0);
-	input_set_abs_params(input_dev, ABS_Y,
-			pdata->y_min ? : 0,
-			pdata->y_max ? : MAX_12BIT,
-			0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE,
-			pdata->pressure_min, pdata->pressure_max, 0, 0);
-
-	vref = pdata->keep_vref_on;
+	struct spi_message *m = &ts->msg[0];
+	struct spi_transfer *x = ts->xfer;
+	struct ads7846_packet *packet = ts->packet;
+	int vref = pdata->keep_vref_on;
 
 	if (ts->model == 7873) {
-		/* The AD7873 is almost identical to the ADS7846
+		/*
+		 * The AD7873 is almost identical to the ADS7846
 		 * keep VREF off during differential/ratiometric
-		 * conversion modes
+		 * conversion modes.
 		 */
 		ts->model = 7846;
 		vref = 0;
 	}
 
-	/* set up the transfers to read touchscreen state; this assumes we
-	 * use formula #2 for pressure, not #3.
-	 */
-	m = &ts->msg[0];
-	x = ts->xfer;
-
+	ts->msg_count = 1;
 	spi_message_init(m);
+	m->context = ts;
 
 	if (ts->model == 7845) {
 		packet->read_y_cmd[0] = READ_Y(vref);
@@ -1094,7 +1014,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		spi_message_add_tail(x, m);
 	}
 
-	/* the first sample after switching drivers can be low quality;
+	/*
+	 * The first sample after switching drivers can be low quality;
 	 * optionally discard it, using a second one after the signals
 	 * have had enough time to stabilize.
 	 */
@@ -1112,11 +1033,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		spi_message_add_tail(x, m);
 	}
 
-	m->complete = ads7846_rx_val;
-	m->context = ts;
-
+	ts->msg_count++;
 	m++;
 	spi_message_init(m);
+	m->context = ts;
 
 	if (ts->model == 7845) {
 		x++;
@@ -1156,13 +1076,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		spi_message_add_tail(x, m);
 	}
 
-	m->complete = ads7846_rx_val;
-	m->context = ts;
-
 	/* turn y+ off, x- on; we'll use formula #2 */
 	if (ts->model == 7846) {
+		ts->msg_count++;
 		m++;
 		spi_message_init(m);
+		m->context = ts;
 
 		x++;
 		packet->read_z1 = READ_Z1(vref);
@@ -1190,11 +1109,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 			spi_message_add_tail(x, m);
 		}
 
-		m->complete = ads7846_rx_val;
-		m->context = ts;
-
+		ts->msg_count++;
 		m++;
 		spi_message_init(m);
+		m->context = ts;
 
 		x++;
 		packet->read_z2 = READ_Z2(vref);
@@ -1221,14 +1139,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 			x->len = 2;
 			spi_message_add_tail(x, m);
 		}
-
-		m->complete = ads7846_rx_val;
-		m->context = ts;
 	}
 
 	/* power down */
+	ts->msg_count++;
 	m++;
 	spi_message_init(m);
+	m->context = ts;
 
 	if (ts->model == 7845) {
 		x++;
@@ -1251,11 +1168,119 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	CS_CHANGE(*x);
 	spi_message_add_tail(x, m);
+}
 
-	m->complete = ads7846_rx;
-	m->context = ts;
+static int __devinit ads7846_probe(struct spi_device *spi)
+{
+	struct ads7846 *ts;
+	struct ads7846_packet *packet;
+	struct input_dev *input_dev;
+	struct ads7846_platform_data *pdata = spi->dev.platform_data;
+	unsigned long irq_flags;
+	int err;
+
+	if (!spi->irq) {
+		dev_dbg(&spi->dev, "no IRQ?\n");
+		return -ENODEV;
+	}
+
+	if (!pdata) {
+		dev_dbg(&spi->dev, "no platform data?\n");
+		return -ENODEV;
+	}
+
+	/* don't exceed max specified sample rate */
+	if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
+		dev_dbg(&spi->dev, "f(sample) %d KHz?\n",
+				(spi->max_speed_hz/SAMPLE_BITS)/1000);
+		return -EINVAL;
+	}
+
+	/* We'd set TX word size 8 bits and RX word size to 13 bits ... except
+	 * that even if the hardware can do that, the SPI controller driver
+	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
+	 */
+	spi->bits_per_word = 8;
+	spi->mode = SPI_MODE_0;
+	err = spi_setup(spi);
+	if (err < 0)
+		return err;
 
-	ts->last_msg = m;
+	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
+	packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !packet || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	dev_set_drvdata(&spi->dev, ts);
+
+	ts->packet = packet;
+	ts->spi = spi;
+	ts->input = input_dev;
+	ts->vref_mv = pdata->vref_mv;
+	ts->swap_xy = pdata->swap_xy;
+
+	mutex_init(&ts->lock);
+	init_waitqueue_head(&ts->wait);
+
+	ts->model = pdata->model ? : 7846;
+	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
+	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+
+	if (pdata->filter != NULL) {
+		if (pdata->filter_init != NULL) {
+			err = pdata->filter_init(pdata, &ts->filter_data);
+			if (err < 0)
+				goto err_free_mem;
+		}
+		ts->filter = pdata->filter;
+		ts->filter_cleanup = pdata->filter_cleanup;
+	} else if (pdata->debounce_max) {
+		ts->debounce_max = pdata->debounce_max;
+		if (ts->debounce_max < 2)
+			ts->debounce_max = 2;
+		ts->debounce_tol = pdata->debounce_tol;
+		ts->debounce_rep = pdata->debounce_rep;
+		ts->filter = ads7846_debounce_filter;
+		ts->filter_data = ts;
+	} else {
+		ts->filter = ads7846_no_filter;
+	}
+
+	err = ads7846_setup_pendown(spi, ts);
+	if (err)
+		goto err_cleanup_filter;
+
+	if (pdata->penirq_recheck_delay_usecs)
+		ts->penirq_recheck_delay_usecs =
+				pdata->penirq_recheck_delay_usecs;
+
+	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
+	snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
+
+	input_dev->name = ts->name;
+	input_dev->phys = ts->phys;
+	input_dev->dev.parent = &spi->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X,
+			pdata->x_min ? : 0,
+			pdata->x_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			pdata->y_min ? : 0,
+			pdata->y_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+			pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+	ads7846_setup_spi_msg(ts, pdata);
 
 	ts->reg = regulator_get(&spi->dev, "vcc");
 	if (IS_ERR(ts->reg)) {
@@ -1271,16 +1296,17 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	}
 
 	irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING;
+	irq_flags |= IRQF_ONESHOT;
 
-	err = request_irq(spi->irq, ads7846_irq, irq_flags,
-			  spi->dev.driver->name, ts);
-
+	err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq,
+				   irq_flags, spi->dev.driver->name, ts);
 	if (err && !pdata->irq_flags) {
 		dev_info(&spi->dev,
 			"trying pin change workaround on irq %d\n", spi->irq);
-		err = request_irq(spi->irq, ads7846_irq,
-				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-				  spi->dev.driver->name, ts);
+		irq_flags |= IRQF_TRIGGER_RISING;
+		err = request_threaded_irq(spi->irq,
+				  ads7846_hard_irq, ads7846_irq,
+				  irq_flags, spi->dev.driver->name, ts);
 	}
 
 	if (err) {
@@ -1294,7 +1320,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
 
-	/* take a first sample, leaving nPENIRQ active and vREF off; avoid
+	/*
+	 * Take a first sample, leaving nPENIRQ active and vREF off; avoid
 	 * the touchscreen, in case it's not connected.
 	 */
 	if (ts->model == 7845)
@@ -1340,20 +1367,18 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 static int __devexit ads7846_remove(struct spi_device *spi)
 {
-	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
+	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
 	device_init_wakeup(&spi->dev, false);
 
-	ads784x_hwmon_unregister(spi, ts);
-	input_unregister_device(ts->input);
-
-	ads7846_suspend(spi, PMSG_SUSPEND);
-
 	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
 
+	ads7846_disable(ts);
 	free_irq(ts->spi->irq, ts);
-	/* suspend left the IRQ disabled */
-	enable_irq(ts->spi->irq);
+
+	input_unregister_device(ts->input);
+
+	ads784x_hwmon_unregister(spi, ts);
 
 	regulator_disable(ts->reg);
 	regulator_put(ts->reg);
@@ -1368,6 +1393,7 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");
+
 	return 0;
 }
 
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
new file mode 100644
index 000000000000..ccde58602563
--- /dev/null
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -0,0 +1,648 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * License terms:GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/input/bu21013.h>
+#include <linux/slab.h>
+
+#define PEN_DOWN_INTR	0
+#define MAX_FINGERS	2
+#define RESET_DELAY	30
+#define PENUP_TIMEOUT	(10)
+#define DELTA_MIN	16
+#define MASK_BITS	0x03
+#define SHIFT_8		8
+#define SHIFT_2		2
+#define LENGTH_OF_BUFFER	11
+#define I2C_RETRY_COUNT	5
+
+#define BU21013_SENSORS_BTN_0_7_REG	0x70
+#define BU21013_SENSORS_BTN_8_15_REG	0x71
+#define BU21013_SENSORS_BTN_16_23_REG	0x72
+#define BU21013_X1_POS_MSB_REG		0x73
+#define BU21013_X1_POS_LSB_REG		0x74
+#define BU21013_Y1_POS_MSB_REG		0x75
+#define BU21013_Y1_POS_LSB_REG		0x76
+#define BU21013_X2_POS_MSB_REG		0x77
+#define BU21013_X2_POS_LSB_REG		0x78
+#define BU21013_Y2_POS_MSB_REG		0x79
+#define BU21013_Y2_POS_LSB_REG		0x7A
+#define BU21013_INT_CLR_REG		0xE8
+#define BU21013_INT_MODE_REG		0xE9
+#define BU21013_GAIN_REG		0xEA
+#define BU21013_OFFSET_MODE_REG		0xEB
+#define BU21013_XY_EDGE_REG		0xEC
+#define BU21013_RESET_REG		0xED
+#define BU21013_CALIB_REG		0xEE
+#define BU21013_DONE_REG		0xEF
+#define BU21013_SENSOR_0_7_REG		0xF0
+#define BU21013_SENSOR_8_15_REG		0xF1
+#define BU21013_SENSOR_16_23_REG	0xF2
+#define BU21013_POS_MODE1_REG		0xF3
+#define BU21013_POS_MODE2_REG		0xF4
+#define BU21013_CLK_MODE_REG		0xF5
+#define BU21013_IDLE_REG		0xFA
+#define BU21013_FILTER_REG		0xFB
+#define BU21013_TH_ON_REG		0xFC
+#define BU21013_TH_OFF_REG		0xFD
+
+
+#define BU21013_RESET_ENABLE		0x01
+
+#define BU21013_SENSORS_EN_0_7		0x3F
+#define BU21013_SENSORS_EN_8_15		0xFC
+#define BU21013_SENSORS_EN_16_23	0x1F
+
+#define BU21013_POS_MODE1_0		0x02
+#define BU21013_POS_MODE1_1		0x04
+#define BU21013_POS_MODE1_2		0x08
+
+#define BU21013_POS_MODE2_ZERO		0x01
+#define BU21013_POS_MODE2_AVG1		0x02
+#define BU21013_POS_MODE2_AVG2		0x04
+#define BU21013_POS_MODE2_EN_XY		0x08
+#define BU21013_POS_MODE2_EN_RAW	0x10
+#define BU21013_POS_MODE2_MULTI		0x80
+
+#define BU21013_CLK_MODE_DIV		0x01
+#define BU21013_CLK_MODE_EXT		0x02
+#define BU21013_CLK_MODE_CALIB		0x80
+
+#define BU21013_IDLET_0			0x01
+#define BU21013_IDLET_1			0x02
+#define BU21013_IDLET_2			0x04
+#define BU21013_IDLET_3			0x08
+#define BU21013_IDLE_INTERMIT_EN	0x10
+
+#define BU21013_DELTA_0_6	0x7F
+#define BU21013_FILTER_EN	0x80
+
+#define BU21013_INT_MODE_LEVEL	0x00
+#define BU21013_INT_MODE_EDGE	0x01
+
+#define BU21013_GAIN_0		0x01
+#define BU21013_GAIN_1		0x02
+#define BU21013_GAIN_2		0x04
+
+#define BU21013_OFFSET_MODE_DEFAULT	0x00
+#define BU21013_OFFSET_MODE_MOVE	0x01
+#define BU21013_OFFSET_MODE_DISABLE	0x02
+
+#define BU21013_TH_ON_0		0x01
+#define BU21013_TH_ON_1		0x02
+#define BU21013_TH_ON_2		0x04
+#define BU21013_TH_ON_3		0x08
+#define BU21013_TH_ON_4		0x10
+#define BU21013_TH_ON_5		0x20
+#define BU21013_TH_ON_6		0x40
+#define BU21013_TH_ON_7		0x80
+#define BU21013_TH_ON_MAX	0xFF
+
+#define BU21013_TH_OFF_0	0x01
+#define BU21013_TH_OFF_1	0x02
+#define BU21013_TH_OFF_2	0x04
+#define BU21013_TH_OFF_3	0x08
+#define BU21013_TH_OFF_4	0x10
+#define BU21013_TH_OFF_5	0x20
+#define BU21013_TH_OFF_6	0x40
+#define BU21013_TH_OFF_7	0x80
+#define BU21013_TH_OFF_MAX	0xFF
+
+#define BU21013_X_EDGE_0	0x01
+#define BU21013_X_EDGE_1	0x02
+#define BU21013_X_EDGE_2	0x04
+#define BU21013_X_EDGE_3	0x08
+#define BU21013_Y_EDGE_0	0x10
+#define BU21013_Y_EDGE_1	0x20
+#define BU21013_Y_EDGE_2	0x40
+#define BU21013_Y_EDGE_3	0x80
+
+#define BU21013_DONE	0x01
+#define BU21013_NUMBER_OF_X_SENSORS	(6)
+#define BU21013_NUMBER_OF_Y_SENSORS	(11)
+
+#define DRIVER_TP	"bu21013_tp"
+
+/**
+ * struct bu21013_ts_data - touch panel data structure
+ * @client: pointer to the i2c client
+ * @wait: variable to wait_queue_head_t structure
+ * @touch_stopped: touch stop flag
+ * @chip: pointer to the touch panel controller
+ * @in_dev: pointer to the input device structure
+ * @intr_pin: interrupt pin value
+ *
+ * Touch panel device data structure
+ */
+struct bu21013_ts_data {
+	struct i2c_client *client;
+	wait_queue_head_t wait;
+	bool touch_stopped;
+	const struct bu21013_platform_device *chip;
+	struct input_dev *in_dev;
+	unsigned int intr_pin;
+};
+
+/**
+ * bu21013_read_block_data(): read the touch co-ordinates
+ * @data: bu21013_ts_data structure pointer
+ * @buf: byte pointer
+ *
+ * Read the touch co-ordinates using i2c read block into buffer
+ * and returns integer.
+ */
+static int bu21013_read_block_data(struct bu21013_ts_data *data, u8 *buf)
+{
+	int ret, i;
+
+	for (i = 0; i < I2C_RETRY_COUNT; i++) {
+		ret = i2c_smbus_read_i2c_block_data
+			(data->client, BU21013_SENSORS_BTN_0_7_REG,
+				LENGTH_OF_BUFFER, buf);
+		if (ret == LENGTH_OF_BUFFER)
+			return 0;
+	}
+	return -EINVAL;
+}
+
+/**
+ * bu21013_do_touch_report(): Get the touch co-ordinates
+ * @data: bu21013_ts_data structure pointer
+ *
+ * Get the touch co-ordinates from touch sensor registers and writes
+ * into device structure and returns integer.
+ */
+static int bu21013_do_touch_report(struct bu21013_ts_data *data)
+{
+	u8	buf[LENGTH_OF_BUFFER];
+	unsigned int pos_x[2], pos_y[2];
+	bool	has_x_sensors, has_y_sensors;
+	int	finger_down_count = 0;
+	int	i;
+
+	if (data == NULL)
+		return -EINVAL;
+
+	if (bu21013_read_block_data(data, buf) < 0)
+		return -EINVAL;
+
+	has_x_sensors = hweight32(buf[0] & BU21013_SENSORS_EN_0_7);
+	has_y_sensors = hweight32(((buf[1] & BU21013_SENSORS_EN_8_15) |
+		((buf[2] & BU21013_SENSORS_EN_16_23) << SHIFT_8)) >> SHIFT_2);
+	if (!has_x_sensors || !has_y_sensors)
+		return 0;
+
+	for (i = 0; i < MAX_FINGERS; i++) {
+		const u8 *p = &buf[4 * i + 3];
+		unsigned int x = p[0] << SHIFT_2 | (p[1] & MASK_BITS);
+		unsigned int y = p[2] << SHIFT_2 | (p[3] & MASK_BITS);
+		if (x == 0 || y == 0)
+			continue;
+		pos_x[finger_down_count] = x;
+		pos_y[finger_down_count] = y;
+		finger_down_count++;
+	}
+
+	if (finger_down_count) {
+		if (finger_down_count == 2 &&
+		    (abs(pos_x[0] - pos_x[1]) < DELTA_MIN ||
+		     abs(pos_y[0] - pos_y[1]) < DELTA_MIN)) {
+			return 0;
+		}
+
+		for (i = 0; i < finger_down_count; i++) {
+			if (data->chip->x_flip)
+				pos_x[i] = data->chip->touch_x_max - pos_x[i];
+			if (data->chip->y_flip)
+				pos_y[i] = data->chip->touch_y_max - pos_y[i];
+
+			input_report_abs(data->in_dev,
+					 ABS_MT_POSITION_X, pos_x[i]);
+			input_report_abs(data->in_dev,
+					 ABS_MT_POSITION_Y, pos_y[i]);
+			input_mt_sync(data->in_dev);
+		}
+	} else
+		input_mt_sync(data->in_dev);
+
+	input_sync(data->in_dev);
+
+	return 0;
+}
+/**
+ * bu21013_gpio_irq() - gpio thread function for touch interrupt
+ * @irq: irq value
+ * @device_data: void pointer
+ *
+ * This gpio thread function for touch interrupt
+ * and returns irqreturn_t.
+ */
+static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
+{
+	struct bu21013_ts_data *data = device_data;
+	struct i2c_client *i2c = data->client;
+	int retval;
+
+	do {
+		retval = bu21013_do_touch_report(data);
+		if (retval < 0) {
+			dev_err(&i2c->dev, "bu21013_do_touch_report failed\n");
+			return IRQ_NONE;
+		}
+
+		data->intr_pin = data->chip->irq_read_val();
+		if (data->intr_pin == PEN_DOWN_INTR)
+			wait_event_timeout(data->wait, data->touch_stopped,
+					   msecs_to_jiffies(2));
+	} while (!data->intr_pin && !data->touch_stopped);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * bu21013_init_chip() - power on sequence for the bu21013 controller
+ * @data: device structure pointer
+ *
+ * This function is used to power on
+ * the bu21013 controller and returns integer.
+ */
+static int bu21013_init_chip(struct bu21013_ts_data *data)
+{
+	int retval;
+	struct i2c_client *i2c = data->client;
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_RESET_REG,
+					BU21013_RESET_ENABLE);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_RESET reg write failed\n");
+		return retval;
+	}
+	msleep(RESET_DELAY);
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_0_7_REG,
+					BU21013_SENSORS_EN_0_7);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_SENSOR_0_7 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_8_15_REG,
+						BU21013_SENSORS_EN_8_15);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_SENSOR_8_15 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_16_23_REG,
+						BU21013_SENSORS_EN_16_23);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_SENSOR_16_23 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE1_REG,
+				(BU21013_POS_MODE1_0 | BU21013_POS_MODE1_1));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_POS_MODE1 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE2_REG,
+			(BU21013_POS_MODE2_ZERO | BU21013_POS_MODE2_AVG1 |
+			BU21013_POS_MODE2_AVG2 | BU21013_POS_MODE2_EN_RAW |
+			BU21013_POS_MODE2_MULTI));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_POS_MODE2 reg write failed\n");
+		return retval;
+	}
+
+	if (data->chip->ext_clk)
+		retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
+			(BU21013_CLK_MODE_EXT | BU21013_CLK_MODE_CALIB));
+	else
+		retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
+			(BU21013_CLK_MODE_DIV | BU21013_CLK_MODE_CALIB));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_CLK_MODE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_IDLE_REG,
+				(BU21013_IDLET_0 | BU21013_IDLE_INTERMIT_EN));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_IDLE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_INT_MODE_REG,
+						BU21013_INT_MODE_LEVEL);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_INT_MODE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_FILTER_REG,
+						(BU21013_DELTA_0_6 |
+							BU21013_FILTER_EN));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_FILTER reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_ON_REG,
+					BU21013_TH_ON_5);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_TH_ON reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
+				BU21013_TH_OFF_4 || BU21013_TH_OFF_3);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_GAIN_REG,
+					(BU21013_GAIN_0 | BU21013_GAIN_1));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_GAIN reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_OFFSET_MODE_REG,
+					BU21013_OFFSET_MODE_DEFAULT);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_OFFSET_MODE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_XY_EDGE_REG,
+				(BU21013_X_EDGE_0 | BU21013_X_EDGE_2 |
+				BU21013_Y_EDGE_1 | BU21013_Y_EDGE_3));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_XY_EDGE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_DONE_REG,
+							BU21013_DONE);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_REG_DONE reg write failed\n");
+		return retval;
+	}
+
+	return 0;
+}
+
+/**
+ * bu21013_free_irq() - frees IRQ registered for touchscreen
+ * @bu21013_data: device structure pointer
+ *
+ * This function signals interrupt thread to stop processing and
+ * frees interrupt.
+ */
+static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data)
+{
+	bu21013_data->touch_stopped = true;
+	wake_up(&bu21013_data->wait);
+	free_irq(bu21013_data->chip->irq, bu21013_data);
+}
+
+/**
+ * bu21013_probe() - initializes the i2c-client touchscreen driver
+ * @client: i2c client structure pointer
+ * @id: i2c device id pointer
+ *
+ * This function used to initializes the i2c-client touchscreen
+ * driver and returns integer.
+ */
+static int __devinit bu21013_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct bu21013_ts_data *bu21013_data;
+	struct input_dev *in_dev;
+	const struct bu21013_platform_device *pdata =
+					client->dev.platform_data;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "i2c smbus byte data not supported\n");
+		return -EIO;
+	}
+
+	if (!pdata) {
+		dev_err(&client->dev, "platform data not defined\n");
+		return -EINVAL;
+	}
+
+	bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL);
+	in_dev = input_allocate_device();
+	if (!bu21013_data || !in_dev) {
+		dev_err(&client->dev, "device memory alloc failed\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	bu21013_data->in_dev = in_dev;
+	bu21013_data->chip = pdata;
+	bu21013_data->client = client;
+	bu21013_data->touch_stopped = false;
+	init_waitqueue_head(&bu21013_data->wait);
+
+	/* configure the gpio pins */
+	if (pdata->cs_en) {
+		error = pdata->cs_en(pdata->cs_pin);
+		if (error < 0) {
+			dev_err(&client->dev, "chip init failed\n");
+			goto err_free_mem;
+		}
+	}
+
+	/* configure the touch panel controller */
+	error = bu21013_init_chip(bu21013_data);
+	if (error) {
+		dev_err(&client->dev, "error in bu21013 config\n");
+		goto err_cs_disable;
+	}
+
+	/* register the device to input subsystem */
+	in_dev->name = DRIVER_TP;
+	in_dev->id.bustype = BUS_I2C;
+	in_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_SYN, in_dev->evbit);
+	__set_bit(EV_KEY, in_dev->evbit);
+	__set_bit(EV_ABS, in_dev->evbit);
+
+	input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0,
+						pdata->x_max_res, 0, 0);
+	input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0,
+						pdata->y_max_res, 0, 0);
+	input_set_drvdata(in_dev, bu21013_data);
+
+	error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
+				     IRQF_TRIGGER_FALLING | IRQF_SHARED,
+				     DRIVER_TP, bu21013_data);
+	if (error) {
+		dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
+		goto err_cs_disable;
+	}
+
+	error = input_register_device(in_dev);
+	if (error) {
+		dev_err(&client->dev, "failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	device_init_wakeup(&client->dev, pdata->wakeup);
+	i2c_set_clientdata(client, bu21013_data);
+
+	return 0;
+
+err_free_irq:
+	bu21013_free_irq(bu21013_data);
+err_cs_disable:
+	pdata->cs_dis(pdata->cs_pin);
+err_free_mem:
+	input_free_device(bu21013_data->in_dev);
+	kfree(bu21013_data);
+
+	return error;
+}
+/**
+ * bu21013_remove() - removes the i2c-client touchscreen driver
+ * @client: i2c client structure pointer
+ *
+ * This function uses to remove the i2c-client
+ * touchscreen driver and returns integer.
+ */
+static int __devexit bu21013_remove(struct i2c_client *client)
+{
+	struct bu21013_ts_data *bu21013_data = i2c_get_clientdata(client);
+
+	bu21013_free_irq(bu21013_data);
+
+	bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin);
+
+	input_unregister_device(bu21013_data->in_dev);
+	kfree(bu21013_data);
+
+	device_init_wakeup(&client->dev, false);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ * bu21013_suspend() - suspend the touch screen controller
+ * @dev: pointer to device structure
+ *
+ * This function is used to suspend the
+ * touch panel controller and returns integer
+ */
+static int bu21013_suspend(struct device *dev)
+{
+	struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
+	struct i2c_client *client = bu21013_data->client;
+
+	bu21013_data->touch_stopped = true;
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(bu21013_data->chip->irq);
+	else
+		disable_irq(bu21013_data->chip->irq);
+
+	return 0;
+}
+
+/**
+ * bu21013_resume() - resume the touch screen controller
+ * @dev: pointer to device structure
+ *
+ * This function is used to resume the touch panel
+ * controller and returns integer.
+ */
+static int bu21013_resume(struct device *dev)
+{
+	struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
+	struct i2c_client *client = bu21013_data->client;
+	int retval;
+
+	retval = bu21013_init_chip(bu21013_data);
+	if (retval < 0) {
+		dev_err(&client->dev, "bu21013 controller config failed\n");
+		return retval;
+	}
+
+	bu21013_data->touch_stopped = false;
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(bu21013_data->chip->irq);
+	else
+		enable_irq(bu21013_data->chip->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops bu21013_dev_pm_ops = {
+	.suspend = bu21013_suspend,
+	.resume  = bu21013_resume,
+};
+#endif
+
+static const struct i2c_device_id bu21013_id[] = {
+	{ DRIVER_TP, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bu21013_id);
+
+static struct i2c_driver bu21013_driver = {
+	.driver	= {
+		.name	=	DRIVER_TP,
+		.owner	=	THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	=	&bu21013_dev_pm_ops,
+#endif
+	},
+	.probe		=	bu21013_probe,
+	.remove		=	__devexit_p(bu21013_remove),
+	.id_table	=	bu21013_id,
+};
+
+/**
+ * bu21013_init() - initializes the bu21013 touchscreen driver
+ *
+ * This function used to initializes the bu21013
+ * touchscreen driver and returns integer.
+ */
+static int __init bu21013_init(void)
+{
+	return i2c_add_driver(&bu21013_driver);
+}
+
+/**
+ * bu21013_exit() - de-initializes the bu21013 touchscreen driver
+ *
+ * This function uses to de-initializes the bu21013
+ * touchscreen driver and returns none.
+ */
+static void __exit bu21013_exit(void)
+{
+	i2c_del_driver(&bu21013_driver);
+}
+
+module_init(bu21013_init);
+module_exit(bu21013_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>");
+MODULE_DESCRIPTION("bu21013 touch screen controller driver");
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index 5ec0946938fe..d0c3a7229adf 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -206,9 +206,9 @@ static int __devinit cy8ctmg110_probe(struct i2c_client *client,
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
 	input_set_abs_params(input_dev, ABS_X,
-			CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0);
+			CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 4, 0);
 	input_set_abs_params(input_dev, ABS_Y,
-			CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0);
+			CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 4, 0);
 
 	if (ts->reset_pin) {
 		err = gpio_request(ts->reset_pin, NULL);
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index a89700e7ace4..498bd62af09a 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -107,8 +107,7 @@ static int __init hp680_ts_init(void)
 	return 0;
 
  fail2:	free_irq(HP680_TS_IRQ, NULL);
-	cancel_delayed_work(&work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&work);
  fail1:	input_free_device(hp680_ts_dev);
 	return err;
 }
@@ -116,8 +115,7 @@ static int __init hp680_ts_init(void)
 static void __exit hp680_ts_exit(void)
 {
 	free_irq(HP680_TS_IRQ, NULL);
-	cancel_delayed_work(&work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&work);
 	input_unregister_device(hp680_ts_dev);
 }
 
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
new file mode 100644
index 000000000000..c0307b22d86f
--- /dev/null
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -0,0 +1,687 @@
+/*
+ * Intel MID Resistive Touch Screen Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com)
+ *			    Ramesh Agarwal (ramesh.agarwal@intel.com)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * TODO:
+ *	review conversion of r/m/w sequences
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <asm/intel_scu_ipc.h>
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_ID1		0x00 /* PMIC ID1 register */
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_INT		0x04 /* PMIC interrupt register */
+#define PMIC_REG_MINT		0x05 /* PMIC interrupt mask register */
+
+/* ADC Interrupt registers */
+#define PMIC_REG_ADCINT		0x5F /* ADC interrupt register */
+#define PMIC_REG_MADCINT	0x60 /* ADC interrupt mask register */
+
+/* ADC Control registers */
+#define PMIC_REG_ADCCNTL1	0x61 /* ADC control register */
+
+/* ADC Channel Selection registers */
+#define PMICADDR0		0xA4
+#define END_OF_CHANNEL		0x1F
+
+/* ADC Result register */
+#define PMIC_REG_ADCSNS0H	0x64
+
+/* ADC channels for touch screen */
+#define MRST_TS_CHAN10		0xA /* Touch screen X+ connection */
+#define MRST_TS_CHAN11		0xB /* Touch screen X- connection */
+#define MRST_TS_CHAN12		0xC /* Touch screen Y+ connection */
+#define MRST_TS_CHAN13		0xD /* Touch screen Y- connection */
+
+/* Touch screen channel BIAS constants */
+#define MRST_XBIAS		0x20
+#define MRST_YBIAS		0x40
+#define MRST_ZBIAS		0x80
+
+/* Touch screen coordinates */
+#define MRST_X_MIN		10
+#define MRST_X_MAX		1024
+#define MRST_X_FUZZ		5
+#define MRST_Y_MIN		10
+#define MRST_Y_MAX		1024
+#define MRST_Y_FUZZ		5
+#define MRST_PRESSURE_MIN	0
+#define MRST_PRESSURE_NOMINAL	50
+#define MRST_PRESSURE_MAX	100
+
+#define WAIT_ADC_COMPLETION	10 /* msec */
+
+/* PMIC ADC round robin delays */
+#define ADC_LOOP_DELAY0		0x0 /* Continuous loop */
+#define ADC_LOOP_DELAY1		0x1 /* 4.5  ms approximate */
+
+/* PMIC Vendor Identifiers */
+#define PMIC_VENDOR_FS		0 /* PMIC vendor FreeScale */
+#define PMIC_VENDOR_MAXIM	1 /* PMIC vendor MAXIM */
+#define PMIC_VENDOR_NEC		2 /* PMIC vendor NEC */
+#define MRSTOUCH_MAX_CHANNELS	32 /* Maximum ADC channels */
+
+/* Touch screen device structure */
+struct mrstouch_dev {
+	struct device *dev; /* device associated with touch screen */
+	struct input_dev *input;
+	char phys[32];
+	u16 asr;		/* Address selection register */
+	int irq;
+	unsigned int vendor;	/* PMIC vendor */
+	unsigned int rev;	/* PMIC revision */
+
+	int (*read_prepare)(struct mrstouch_dev *tsdev);
+	int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z);
+	int (*read_finish)(struct mrstouch_dev *tsdev);
+};
+
+
+/*************************** NEC and Maxim Interface ************************/
+
+static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev)
+{
+	return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20);
+}
+
+/*
+ * Enables PENDET interrupt.
+ */
+static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev)
+{
+	int err;
+
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20);
+	if (!err)
+		err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05);
+
+	return err;
+}
+
+/*
+ * Reads PMIC ADC touch screen result
+ * Reads ADC storage registers for higher 7 and lower 3 bits and
+ * converts the two readings into a single value and turns off gain bit
+ */
+static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm)
+{
+	int err;
+	u16 result;
+	u32 res;
+
+	result = PMIC_REG_ADCSNS0H + offset;
+
+	if (chan == MRST_TS_CHAN12)
+		result += 4;
+
+	err = intel_scu_ipc_ioread32(result, &res);
+	if (err)
+		return err;
+
+	/* Mash the bits up */
+
+	*vp = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vp |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vp &= 0x3FF;
+
+	res >>= 16;
+
+	*vm = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vm |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vm &= 0x3FF;
+
+	return 0;
+}
+
+/*
+ * Enables X, Y and Z bias values
+ * Enables YPYM for X channels and XPXM for Y channels
+ */
+static int mrstouch_ts_bias_set(uint offset, uint bias)
+{
+	int count;
+	u16 chan, start;
+	u16 reg[4];
+	u8 data[4];
+
+	chan = PMICADDR0 + offset;
+	start = MRST_TS_CHAN10;
+
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = bias | (start + count);
+	}
+
+	return intel_scu_ipc_writev(reg, data, 4);
+}
+
+/* To read touch screen channel values */
+static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev,
+				 u16 *x, u16 *y, u16 *z)
+{
+	int err;
+	u16 xm, ym, zm;
+
+	/* configure Y bias for X channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read x+ and x- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm);
+	if (err)
+		goto ipc_error;
+
+	/* configure x bias for y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read y+ and y- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym);
+	if (err)
+		goto ipc_error;
+
+	/* configure z bias for x and y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read z+ and z- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm);
+	if (err)
+		goto ipc_error;
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during adc read\n");
+	return err;
+}
+
+
+/*************************** Freescale Interface ************************/
+
+static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev)
+{
+	int err, count;
+	u16 chan;
+	u16 reg[5];
+	u8 data[5];
+
+	/* Stop the ADC */
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02);
+	if (err)
+		goto ipc_error;
+
+	chan = PMICADDR0 + tsdev->asr;
+
+	/* Set X BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x2A;
+	}
+	reg[count] =  chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Y BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x4A;
+	}
+	reg[count] = chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Z BIAS */
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during %s\n", __func__);
+	return err;
+}
+
+static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev,
+				u16 *x, u16 *y, u16 *z)
+{
+	int err;
+	u16 result;
+	u16 reg[4];
+	u8 data[4];
+
+	result = PMIC_REG_ADCSNS0H + tsdev->asr;
+
+	reg[0] = result + 4;
+	reg[1] = result + 5;
+	reg[2] = result + 16;
+	reg[3] = result + 17;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	*x = data[0] << 3; /* Higher 7 bits */
+	*x |= data[1] & 0x7; /* Lower 3 bits */
+	*x &= 0x3FF;
+
+	*y = data[2] << 3; /* Higher 7 bits */
+	*y |= data[3] & 0x7; /* Lower 3 bits */
+	*y &= 0x3FF;
+
+	/* Read Z value */
+	reg[0] = result + 28;
+	reg[1] = result + 29;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	*z = data[0] << 3; /* Higher 7 bits */
+	*z |= data[1] & 0x7; /* Lower 3 bits */
+	*z &= 0x3FF;
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during %s\n", __func__);
+	return err;
+}
+
+static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev)
+{
+	int err, count;
+	u16 chan;
+	u16 reg[5];
+	u8 data[5];
+
+	/* Clear all TS channels */
+	chan = PMICADDR0 + tsdev->asr;
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000);
+	if (err)
+		goto ipc_error;
+
+	/* Start ADC */
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02);
+	if (err)
+		goto ipc_error;
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during %s\n", __func__);
+	return err;
+}
+
+static void mrstouch_report_event(struct input_dev *input,
+			unsigned int x, unsigned int y, unsigned int z)
+{
+	if (z > MRST_PRESSURE_NOMINAL) {
+		/* Pen touched, report button touch and coordinates */
+		input_report_key(input, BTN_TOUCH, 1);
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+	} else {
+		input_report_key(input, BTN_TOUCH, 0);
+	}
+
+	input_report_abs(input, ABS_PRESSURE, z);
+	input_sync(input);
+}
+
+/* PENDET interrupt handler */
+static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id)
+{
+	struct mrstouch_dev *tsdev = dev_id;
+	u16 x, y, z;
+
+	/*
+	 * Should we lower thread priority? Probably not, since we are
+	 * not spinning but sleeping...
+	 */
+
+	if (tsdev->read_prepare(tsdev))
+		goto out;
+
+	do {
+		if (tsdev->read(tsdev, &x, &y, &z))
+			break;
+
+		mrstouch_report_event(tsdev->input, x, y, z);
+	} while (z > MRST_PRESSURE_NOMINAL);
+
+	tsdev->read_finish(tsdev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+/* Utility to read PMIC ID */
+static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev)
+{
+	int err;
+	u8 r;
+
+	err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r);
+	if (err)
+		return err;
+
+	*vendor = r & 0x7;
+	*rev = (r >> 3) & 0x7;
+
+	return 0;
+}
+
+/*
+ * Parse ADC channels to find end of the channel configured by other ADC user
+ * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels
+ */
+static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev)
+{
+	int err, i, found;
+	u8 r8;
+
+	found = -1;
+
+	for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
+		if (found >= 0)
+			break;
+
+		err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8);
+		if (err)
+			return err;
+
+		if (r8 == END_OF_CHANNEL) {
+			found = i;
+			break;
+		}
+	}
+	if (found < 0)
+		return 0;
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		if (found && found > (MRSTOUCH_MAX_CHANNELS - 18))
+			return -ENOSPC;
+	} else {
+		if (found && found > (MRSTOUCH_MAX_CHANNELS - 4))
+			return -ENOSPC;
+	}
+	return found;
+}
+
+
+/*
+ * Writes touch screen channels to ADC address selection registers
+ */
+static int __devinit mrstouch_ts_chan_set(uint offset)
+{
+	u16 chan;
+
+	int ret, count;
+
+	chan = PMICADDR0 + offset;
+	for (count = 0; count <= 3; count++) {
+		ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count);
+		if (ret)
+			return ret;
+	}
+	return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL);
+}
+
+/* Initialize ADC */
+static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev)
+{
+	int err, start;
+	u8 ra, rm;
+
+	err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev);
+	if (err) {
+		dev_err(tsdev->dev, "Unable to read PMIC id\n");
+		return err;
+	}
+
+	switch (tsdev->vendor) {
+	case PMIC_VENDOR_NEC:
+	case PMIC_VENDOR_MAXIM:
+		tsdev->read_prepare = mrstouch_nec_adc_read_prepare;
+		tsdev->read = mrstouch_nec_adc_read;
+		tsdev->read_finish = mrstouch_nec_adc_read_finish;
+		break;
+
+	case PMIC_VENDOR_FS:
+		tsdev->read_prepare = mrstouch_fs_adc_read_prepare;
+		tsdev->read = mrstouch_fs_adc_read;
+		tsdev->read_finish = mrstouch_fs_adc_read_finish;
+		break;
+
+	default:
+		dev_err(tsdev->dev,
+			"Unsupported touchscreen: %d\n", tsdev->vendor);
+		return -ENXIO;
+	}
+
+	start = mrstouch_chan_parse(tsdev);
+	if (start < 0) {
+		dev_err(tsdev->dev, "Unable to parse channels\n");
+		return start;
+	}
+
+	tsdev->asr = start;
+
+	/*
+	 * ADC power on, start, enable PENDET and set loop delay
+	 * ADC loop delay is set to 4.5 ms approximately
+	 * Loop delay more than this results in jitter in adc readings
+	 * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+	 * interrupt generation sometimes.
+	 */
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		ra = 0xE0 | ADC_LOOP_DELAY0;
+		rm = 0x5;
+	} else {
+		/* NEC and MAXIm not consistent with loop delay 0 */
+		ra = 0xE0 | ADC_LOOP_DELAY1;
+		rm = 0x0;
+
+		/* configure touch screen channels */
+		err = mrstouch_ts_chan_set(tsdev->asr);
+		if (err)
+			return err;
+	}
+
+	err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7);
+	if (err)
+		return err;
+
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+
+/* Probe function for touch screen driver */
+static int __devinit mrstouch_probe(struct platform_device *pdev)
+{
+	struct mrstouch_dev *tsdev;
+	struct input_dev *input;
+	int err;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no interrupt assigned\n");
+		return -EINVAL;
+	}
+
+	tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!tsdev || !input) {
+		dev_err(&pdev->dev, "unable to allocate memory\n");
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsdev->dev = &pdev->dev;
+	tsdev->input = input;
+	tsdev->irq = irq;
+
+	snprintf(tsdev->phys, sizeof(tsdev->phys),
+		 "%s/input0", dev_name(tsdev->dev));
+
+	err = mrstouch_adc_init(tsdev);
+	if (err) {
+		dev_err(&pdev->dev, "ADC initialization failed\n");
+		goto err_free_mem;
+	}
+
+	input->name = "mrst_touchscreen";
+	input->phys = tsdev->phys;
+	input->dev.parent = tsdev->dev;
+
+	input->id.vendor = tsdev->vendor;
+	input->id.version = tsdev->rev;
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(tsdev->input, ABS_X,
+			     MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0);
+	input_set_abs_params(tsdev->input, ABS_Y,
+			     MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0);
+	input_set_abs_params(tsdev->input, ABS_PRESSURE,
+			     MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
+
+	err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
+				   0, "mrstouch", tsdev);
+	if (err) {
+		dev_err(tsdev->dev, "unable to allocate irq\n");
+		goto err_free_mem;
+	}
+
+	err = input_register_device(tsdev->input);
+	if (err) {
+		dev_err(tsdev->dev, "unable to register input device\n");
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, tsdev);
+	return 0;
+
+err_free_irq:
+	free_irq(tsdev->irq, tsdev);
+err_free_mem:
+	input_free_device(input);
+	kfree(tsdev);
+	return err;
+}
+
+static int __devexit mrstouch_remove(struct platform_device *pdev)
+{
+	struct mrstouch_dev *tsdev = platform_get_drvdata(pdev);
+
+	free_irq(tsdev->irq, tsdev);
+	input_unregister_device(tsdev->input);
+	kfree(tsdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver mrstouch_driver = {
+	.driver = {
+		.name	= "pmic_touch",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mrstouch_probe,
+	.remove		= __devexit_p(mrstouch_remove),
+};
+
+static int __init mrstouch_init(void)
+{
+	return platform_driver_register(&mrstouch_driver);
+}
+module_init(mrstouch_init);
+
+static void __exit mrstouch_exit(void)
+{
+	platform_driver_unregister(&mrstouch_driver);
+}
+module_exit(mrstouch_exit);
+
+MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com");
+MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
new file mode 100644
index 000000000000..dcf803f5a1f7
--- /dev/null
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -0,0 +1,411 @@
+/*
+ * LPC32xx built-in touchscreen driver
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/*
+ * Touchscreen controller register offsets
+ */
+#define LPC32XX_TSC_STAT			0x00
+#define LPC32XX_TSC_SEL				0x04
+#define LPC32XX_TSC_CON				0x08
+#define LPC32XX_TSC_FIFO			0x0C
+#define LPC32XX_TSC_DTR				0x10
+#define LPC32XX_TSC_RTR				0x14
+#define LPC32XX_TSC_UTR				0x18
+#define LPC32XX_TSC_TTR				0x1C
+#define LPC32XX_TSC_DXP				0x20
+#define LPC32XX_TSC_MIN_X			0x24
+#define LPC32XX_TSC_MAX_X			0x28
+#define LPC32XX_TSC_MIN_Y			0x2C
+#define LPC32XX_TSC_MAX_Y			0x30
+#define LPC32XX_TSC_AUX_UTR			0x34
+#define LPC32XX_TSC_AUX_MIN			0x38
+#define LPC32XX_TSC_AUX_MAX			0x3C
+
+#define LPC32XX_TSC_STAT_FIFO_OVRRN		(1 << 8)
+#define LPC32XX_TSC_STAT_FIFO_EMPTY		(1 << 7)
+
+#define LPC32XX_TSC_SEL_DEFVAL			0x0284
+
+#define LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4	(0x1 << 11)
+#define LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(s)	((10 - (s)) << 7)
+#define LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(s)	((10 - (s)) << 4)
+#define LPC32XX_TSC_ADCCON_POWER_UP		(1 << 2)
+#define LPC32XX_TSC_ADCCON_AUTO_EN		(1 << 0)
+
+#define LPC32XX_TSC_FIFO_TS_P_LEVEL		(1 << 31)
+#define LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(x)	(((x) & 0x03FF0000) >> 16)
+#define LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(y)	((y) & 0x000003FF)
+
+#define LPC32XX_TSC_ADCDAT_VALUE_MASK		0x000003FF
+
+#define LPC32XX_TSC_MIN_XY_VAL			0x0
+#define LPC32XX_TSC_MAX_XY_VAL			0x3FF
+
+#define MOD_NAME "ts-lpc32xx"
+
+#define tsc_readl(dev, reg) \
+	__raw_readl((dev)->tsc_base + (reg))
+#define tsc_writel(dev, reg, val) \
+	__raw_writel((val), (dev)->tsc_base + (reg))
+
+struct lpc32xx_tsc {
+	struct input_dev *dev;
+	void __iomem *tsc_base;
+	int irq;
+	struct clk *clk;
+};
+
+static void lpc32xx_fifo_clear(struct lpc32xx_tsc *tsc)
+{
+	while (!(tsc_readl(tsc, LPC32XX_TSC_STAT) &
+			LPC32XX_TSC_STAT_FIFO_EMPTY))
+		tsc_readl(tsc, LPC32XX_TSC_FIFO);
+}
+
+static irqreturn_t lpc32xx_ts_interrupt(int irq, void *dev_id)
+{
+	u32 tmp, rv[4], xs[4], ys[4];
+	int idx;
+	struct lpc32xx_tsc *tsc = dev_id;
+	struct input_dev *input = tsc->dev;
+
+	tmp = tsc_readl(tsc, LPC32XX_TSC_STAT);
+
+	if (tmp & LPC32XX_TSC_STAT_FIFO_OVRRN) {
+		/* FIFO overflow - throw away samples */
+		lpc32xx_fifo_clear(tsc);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * Gather and normalize 4 samples. Pen-up events may have less
+	 * than 4 samples, but its ok to pop 4 and let the last sample
+	 * pen status check drop the samples.
+	 */
+	idx = 0;
+	while (idx < 4 &&
+	       !(tsc_readl(tsc, LPC32XX_TSC_STAT) &
+			LPC32XX_TSC_STAT_FIFO_EMPTY)) {
+		tmp = tsc_readl(tsc, LPC32XX_TSC_FIFO);
+		xs[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK -
+			LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(tmp);
+		ys[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK -
+			LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(tmp);
+		rv[idx] = tmp;
+		idx++;
+	}
+
+	/* Data is only valid if pen is still down in last sample */
+	if (!(rv[3] & LPC32XX_TSC_FIFO_TS_P_LEVEL) && idx == 4) {
+		/* Use average of 2nd and 3rd sample for position */
+		input_report_abs(input, ABS_X, (xs[1] + xs[2]) / 2);
+		input_report_abs(input, ABS_Y, (ys[1] + ys[2]) / 2);
+		input_report_key(input, BTN_TOUCH, 1);
+	} else {
+		input_report_key(input, BTN_TOUCH, 0);
+	}
+
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}
+
+static void lpc32xx_stop_tsc(struct lpc32xx_tsc *tsc)
+{
+	/* Disable auto mode */
+	tsc_writel(tsc, LPC32XX_TSC_CON,
+		   tsc_readl(tsc, LPC32XX_TSC_CON) &
+			     ~LPC32XX_TSC_ADCCON_AUTO_EN);
+
+	clk_disable(tsc->clk);
+}
+
+static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc)
+{
+	u32 tmp;
+
+	clk_enable(tsc->clk);
+
+	tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP;
+
+	/* Set the TSC FIFO depth to 4 samples @ 10-bits per sample (max) */
+	tmp = LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 |
+	      LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(10) |
+	      LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(10);
+	tsc_writel(tsc, LPC32XX_TSC_CON, tmp);
+
+	/* These values are all preset */
+	tsc_writel(tsc, LPC32XX_TSC_SEL, LPC32XX_TSC_SEL_DEFVAL);
+	tsc_writel(tsc, LPC32XX_TSC_MIN_X, LPC32XX_TSC_MIN_XY_VAL);
+	tsc_writel(tsc, LPC32XX_TSC_MAX_X, LPC32XX_TSC_MAX_XY_VAL);
+	tsc_writel(tsc, LPC32XX_TSC_MIN_Y, LPC32XX_TSC_MIN_XY_VAL);
+	tsc_writel(tsc, LPC32XX_TSC_MAX_Y, LPC32XX_TSC_MAX_XY_VAL);
+
+	/* Aux support is not used */
+	tsc_writel(tsc, LPC32XX_TSC_AUX_UTR, 0);
+	tsc_writel(tsc, LPC32XX_TSC_AUX_MIN, 0);
+	tsc_writel(tsc, LPC32XX_TSC_AUX_MAX, 0);
+
+	/*
+	 * Set sample rate to about 240Hz per X/Y pair. A single measurement
+	 * consists of 4 pairs which gives about a 60Hz sample rate based on
+	 * a stable 32768Hz clock source. Values are in clocks.
+	 * Rate is (32768 / (RTR + XCONV + RTR + YCONV + DXP + TTR + UTR) / 4
+	 */
+	tsc_writel(tsc, LPC32XX_TSC_RTR, 0x2);
+	tsc_writel(tsc, LPC32XX_TSC_DTR, 0x2);
+	tsc_writel(tsc, LPC32XX_TSC_TTR, 0x10);
+	tsc_writel(tsc, LPC32XX_TSC_DXP, 0x4);
+	tsc_writel(tsc, LPC32XX_TSC_UTR, 88);
+
+	lpc32xx_fifo_clear(tsc);
+
+	/* Enable automatic ts event capture */
+	tsc_writel(tsc, LPC32XX_TSC_CON, tmp | LPC32XX_TSC_ADCCON_AUTO_EN);
+}
+
+static int lpc32xx_ts_open(struct input_dev *dev)
+{
+	struct lpc32xx_tsc *tsc = input_get_drvdata(dev);
+
+	lpc32xx_setup_tsc(tsc);
+
+	return 0;
+}
+
+static void lpc32xx_ts_close(struct input_dev *dev)
+{
+	struct lpc32xx_tsc *tsc = input_get_drvdata(dev);
+
+	lpc32xx_stop_tsc(tsc);
+}
+
+static int __devinit lpc32xx_ts_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_tsc *tsc;
+	struct input_dev *input;
+	struct resource *res;
+	resource_size_t size;
+	int irq;
+	int error;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Can't get memory resource\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Can't get interrupt resource\n");
+		return irq;
+	}
+
+	tsc = kzalloc(sizeof(*tsc), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!tsc || !input) {
+		dev_err(&pdev->dev, "failed allocating memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsc->dev = input;
+	tsc->irq = irq;
+
+	size = resource_size(res);
+
+	if (!request_mem_region(res->start, size, pdev->name)) {
+		dev_err(&pdev->dev, "TSC registers are not free\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	tsc->tsc_base = ioremap(res->start, size);
+	if (!tsc->tsc_base) {
+		dev_err(&pdev->dev, "Can't map memory\n");
+		error = -ENOMEM;
+		goto err_release_mem;
+	}
+
+	tsc->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tsc->clk)) {
+		dev_err(&pdev->dev, "failed getting clock\n");
+		error = PTR_ERR(tsc->clk);
+		goto err_unmap;
+	}
+
+	input->name = MOD_NAME;
+	input->phys = "lpc32xx/input0";
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0002;
+	input->id.version = 0x0100;
+	input->dev.parent = &pdev->dev;
+	input->open = lpc32xx_ts_open;
+	input->close = lpc32xx_ts_close;
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input, ABS_X, LPC32XX_TSC_MIN_XY_VAL,
+			     LPC32XX_TSC_MAX_XY_VAL, 0, 0);
+	input_set_abs_params(input, ABS_Y, LPC32XX_TSC_MIN_XY_VAL,
+			     LPC32XX_TSC_MAX_XY_VAL, 0, 0);
+
+	input_set_drvdata(input, tsc);
+
+	error = request_irq(tsc->irq, lpc32xx_ts_interrupt,
+			    IRQF_DISABLED, pdev->name, tsc);
+	if (error) {
+		dev_err(&pdev->dev, "failed requesting interrupt\n");
+		goto err_put_clock;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "failed registering input device\n");
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, tsc);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+err_free_irq:
+	free_irq(tsc->irq, tsc);
+err_put_clock:
+	clk_put(tsc->clk);
+err_unmap:
+	iounmap(tsc->tsc_base);
+err_release_mem:
+	release_mem_region(res->start, size);
+err_free_mem:
+	input_free_device(input);
+	kfree(tsc);
+
+	return error;
+}
+
+static int __devexit lpc32xx_ts_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_tsc *tsc = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	device_init_wakeup(&pdev->dev, 0);
+	free_irq(tsc->irq, tsc);
+
+	input_unregister_device(tsc->dev);
+
+	clk_put(tsc->clk);
+
+	iounmap(tsc->tsc_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(tsc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_ts_suspend(struct device *dev)
+{
+	struct lpc32xx_tsc *tsc = dev_get_drvdata(dev);
+	struct input_dev *input = tsc->dev;
+
+	/*
+	 * Suspend and resume can be called when the device hasn't been
+	 * enabled. If there are no users that have the device open, then
+	 * avoid calling the TSC stop and start functions as the TSC
+	 * isn't yet clocked.
+	 */
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		if (device_may_wakeup(dev))
+			enable_irq_wake(tsc->irq);
+		else
+			lpc32xx_stop_tsc(tsc);
+	}
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static int lpc32xx_ts_resume(struct device *dev)
+{
+	struct lpc32xx_tsc *tsc = dev_get_drvdata(dev);
+	struct input_dev *input = tsc->dev;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		if (device_may_wakeup(dev))
+			disable_irq_wake(tsc->irq);
+		else
+			lpc32xx_setup_tsc(tsc);
+	}
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
+	.suspend	= lpc32xx_ts_suspend,
+	.resume		= lpc32xx_ts_resume,
+};
+#define LPC32XX_TS_PM_OPS (&lpc32xx_ts_pm_ops)
+#else
+#define LPC32XX_TS_PM_OPS NULL
+#endif
+
+static struct platform_driver lpc32xx_ts_driver = {
+	.probe		= lpc32xx_ts_probe,
+	.remove		= __devexit_p(lpc32xx_ts_remove),
+	.driver		= {
+		.name	= MOD_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= LPC32XX_TS_PM_OPS,
+	},
+};
+
+static int __init lpc32xx_ts_init(void)
+{
+	return platform_driver_register(&lpc32xx_ts_driver);
+}
+module_init(lpc32xx_ts_init);
+
+static void __exit lpc32xx_ts_exit(void)
+{
+	platform_driver_unregister(&lpc32xx_ts_driver);
+}
+module_exit(lpc32xx_ts_exit);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com");
+MODULE_DESCRIPTION("LPC32XX TSC Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lpc32xx_ts");
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 6085d12fd561..8feb7f3c8be1 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -350,7 +350,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev)
  err_tcirq:
 	free_irq(ts.irq_tc, ts.input);
  err_inputdev:
-	input_unregister_device(ts.input);
+	input_free_device(ts.input);
  err_iomap:
 	iounmap(ts.io);
  err_clk:
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index 656148ec0027..ae88e13c99ff 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -268,7 +268,7 @@ static int __devinit stmpe_input_probe(struct platform_device *pdev)
 	struct stmpe_touch *ts;
 	struct input_dev *idev;
 	struct stmpe_ts_platform_data *ts_pdata = NULL;
-	int ret = 0;
+	int ret;
 	int ts_irq;
 
 	ts_irq = platform_get_irq_byname(pdev, "FIFO_TH");
@@ -276,12 +276,16 @@ static int __devinit stmpe_input_probe(struct platform_device *pdev)
 		return ts_irq;
 
 	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
-	if (!ts)
+	if (!ts) {
+		ret = -ENOMEM;
 		goto err_out;
+	}
 
 	idev = input_allocate_device();
-	if (!idev)
+	if (!idev) {
+		ret = -ENOMEM;
 		goto err_free_ts;
+	}
 
 	platform_set_drvdata(pdev, ts);
 	ts->stmpe = stmpe;
@@ -361,7 +365,6 @@ static int __devexit stmpe_ts_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 
 	input_unregister_device(ts->idev);
-	input_free_device(ts->idev);
 
 	kfree(ts);
 
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
index a644d18c04dc..c8c136cf7bbc 100644
--- a/drivers/input/touchscreen/tps6507x-ts.c
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -335,6 +335,7 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 		dev_err(tsc->dev, "schedule failed");
 		goto err2;
 	 }
+	platform_set_drvdata(pdev, tps6507x_dev);
 
 	return 0;
 
@@ -358,7 +359,7 @@ static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
 	cancel_delayed_work_sync(&tsc->work);
 	destroy_workqueue(tsc->wq);
 
-	input_free_device(input_dev);
+	input_unregister_device(input_dev);
 
 	tps6507x_dev->ts = NULL;
 	kfree(tsc);
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index be23780e8a3e..80467f262331 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -265,7 +265,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client,
 				   const struct i2c_device_id *id)
 {
 	struct tsc2007 *ts;
-	struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data;
+	struct tsc2007_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *input_dev;
 	int err;
 
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 56dc35c94bb1..9ae4c7b16ba7 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -2,6 +2,7 @@
  * Wacom W8001 penabled serial touchscreen driver
  *
  * Copyright (c) 2008 Jaya Kumar
+ * Copyright (c) 2010 Red Hat, Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License. See the file COPYING in the main directory of this archive for
@@ -30,11 +31,24 @@ MODULE_LICENSE("GPL");
 #define W8001_LEAD_BYTE		0x80
 #define W8001_TAB_MASK		0x40
 #define W8001_TAB_BYTE		0x40
+/* set in first byte of touch data packets */
+#define W8001_TOUCH_MASK	(0x10 | W8001_LEAD_MASK)
+#define W8001_TOUCH_BYTE	(0x10 | W8001_LEAD_BYTE)
 
 #define W8001_QUERY_PACKET	0x20
 
 #define W8001_CMD_START		'1'
 #define W8001_CMD_QUERY		'*'
+#define W8001_CMD_TOUCHQUERY	'%'
+
+/* length of data packets in bytes, depends on device. */
+#define W8001_PKTLEN_TOUCH93	5
+#define W8001_PKTLEN_TOUCH9A	7
+#define W8001_PKTLEN_TPCPEN	9
+#define W8001_PKTLEN_TPCCTL	11	/* control packet */
+#define W8001_PKTLEN_TOUCH2FG	13
+
+#define MAX_TRACKING_ID		0xFF	/* arbitrarily chosen */
 
 struct w8001_coord {
 	u8 rdy;
@@ -48,6 +62,15 @@ struct w8001_coord {
 	u8 tilt_y;
 };
 
+/* touch query reply packet */
+struct w8001_touch_query {
+	u8 panel_res;
+	u8 capacity_res;
+	u8 sensor_id;
+	u16 x;
+	u16 y;
+};
+
 /*
  * Per-touchscreen data.
  */
@@ -62,6 +85,9 @@ struct w8001 {
 	unsigned char response[W8001_MAX_LENGTH];
 	unsigned char data[W8001_MAX_LENGTH];
 	char phys[32];
+	int type;
+	unsigned int pktlen;
+	int trkid[2];
 };
 
 static void parse_data(u8 *data, struct w8001_coord *coord)
@@ -88,11 +114,98 @@ static void parse_data(u8 *data, struct w8001_coord *coord)
 	coord->tilt_y = data[8] & 0x7F;
 }
 
+static void parse_touch(struct w8001 *w8001)
+{
+	static int trkid;
+	struct input_dev *dev = w8001->dev;
+	unsigned char *data = w8001->data;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		input_mt_slot(dev, i);
+
+		if (data[0] & (1 << i)) {
+			int x = (data[6 * i + 1] << 7) | (data[6 * i + 2]);
+			int y = (data[6 * i + 3] << 7) | (data[6 * i + 4]);
+			/* data[5,6] and [11,12] is finger capacity */
+
+			input_report_abs(dev, ABS_MT_POSITION_X, x);
+			input_report_abs(dev, ABS_MT_POSITION_Y, y);
+			input_report_abs(dev, ABS_MT_TOOL_TYPE, MT_TOOL_FINGER);
+			if (w8001->trkid[i] < 0)
+				w8001->trkid[i] = trkid++ & MAX_TRACKING_ID;
+		} else {
+			w8001->trkid[i] = -1;
+		}
+		input_report_abs(dev, ABS_MT_TRACKING_ID, w8001->trkid[i]);
+	}
+
+	input_sync(dev);
+}
+
+static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
+{
+	memset(query, 0, sizeof(*query));
+
+	query->panel_res = data[1];
+	query->sensor_id = data[2] & 0x7;
+	query->capacity_res = data[7];
+
+	query->x = data[3] << 9;
+	query->x |= data[4] << 2;
+	query->x |= (data[2] >> 5) & 0x3;
+
+	query->y = data[5] << 9;
+	query->y |= data[6] << 2;
+	query->y |= (data[2] >> 3) & 0x3;
+}
+
+static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
+{
+	struct input_dev *dev = w8001->dev;
+
+	/*
+	 * We have 1 bit for proximity (rdy) and 3 bits for tip, side,
+	 * side2/eraser. If rdy && f2 are set, this can be either pen + side2,
+	 * or eraser. assume
+	 * - if dev is already in proximity and f2 is toggled → pen + side2
+	 * - if dev comes into proximity with f2 set → eraser
+	 * If f2 disappears after assuming eraser, fake proximity out for
+	 * eraser and in for pen.
+	 */
+
+	if (!w8001->type) {
+		w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+	} else if (w8001->type == BTN_TOOL_RUBBER) {
+		if (!coord->f2) {
+			input_report_abs(dev, ABS_PRESSURE, 0);
+			input_report_key(dev, BTN_TOUCH, 0);
+			input_report_key(dev, BTN_STYLUS, 0);
+			input_report_key(dev, BTN_STYLUS2, 0);
+			input_report_key(dev, BTN_TOOL_RUBBER, 0);
+			input_sync(dev);
+			w8001->type = BTN_TOOL_PEN;
+		}
+	} else {
+		input_report_key(dev, BTN_STYLUS2, coord->f2);
+	}
+
+	input_report_abs(dev, ABS_X, coord->x);
+	input_report_abs(dev, ABS_Y, coord->y);
+	input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure);
+	input_report_key(dev, BTN_TOUCH, coord->tsw);
+	input_report_key(dev, BTN_STYLUS, coord->f1);
+	input_report_key(dev, w8001->type, coord->rdy);
+	input_sync(dev);
+
+	if (!coord->rdy)
+		w8001->type = 0;
+}
+
 static irqreturn_t w8001_interrupt(struct serio *serio,
 				   unsigned char data, unsigned int flags)
 {
 	struct w8001 *w8001 = serio_get_drvdata(serio);
-	struct input_dev *dev = w8001->dev;
 	struct w8001_coord coord;
 	unsigned char tmp;
 
@@ -105,26 +218,45 @@ static irqreturn_t w8001_interrupt(struct serio *serio,
 		}
 		break;
 
-	case 8:
+	case W8001_PKTLEN_TOUCH93 - 1:
+	case W8001_PKTLEN_TOUCH9A - 1:
+		/* ignore one-finger touch packet. */
+		if (w8001->pktlen == w8001->idx)
+			w8001->idx = 0;
+		break;
+
+	/* Pen coordinates packet */
+	case W8001_PKTLEN_TPCPEN - 1:
 		tmp = w8001->data[0] & W8001_TAB_MASK;
 		if (unlikely(tmp == W8001_TAB_BYTE))
 			break;
 
+		tmp = (w8001->data[0] & W8001_TOUCH_BYTE);
+		if (tmp == W8001_TOUCH_BYTE)
+			break;
+
 		w8001->idx = 0;
 		parse_data(w8001->data, &coord);
-		input_report_abs(dev, ABS_X, coord.x);
-		input_report_abs(dev, ABS_Y, coord.y);
-		input_report_abs(dev, ABS_PRESSURE, coord.pen_pressure);
-		input_report_key(dev, BTN_TOUCH, coord.tsw);
-		input_sync(dev);
+		report_pen_events(w8001, &coord);
 		break;
 
-	case 10:
+	/* control packet */
+	case W8001_PKTLEN_TPCCTL - 1:
+		tmp = (w8001->data[0] & W8001_TOUCH_MASK);
+		if (tmp == W8001_TOUCH_BYTE)
+			break;
+
 		w8001->idx = 0;
 		memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH);
 		w8001->response_type = W8001_QUERY_PACKET;
 		complete(&w8001->cmd_done);
 		break;
+
+	/* 2 finger touch packet */
+	case W8001_PKTLEN_TOUCH2FG - 1:
+		w8001->idx = 0;
+		parse_touch(w8001);
+		break;
 	}
 
 	return IRQ_HANDLED;
@@ -167,6 +299,38 @@ static int w8001_setup(struct w8001 *w8001)
 	input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
 	input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
 
+	error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
+	if (!error) {
+		struct w8001_touch_query touch;
+
+		parse_touchquery(w8001->response, &touch);
+
+		switch (touch.sensor_id) {
+		case 0:
+		case 2:
+			w8001->pktlen = W8001_PKTLEN_TOUCH93;
+			break;
+		case 1:
+		case 3:
+		case 4:
+			w8001->pktlen = W8001_PKTLEN_TOUCH9A;
+			break;
+		case 5:
+			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
+
+			input_mt_create_slots(dev, 2);
+			input_set_abs_params(dev, ABS_MT_TRACKING_ID,
+						0, MAX_TRACKING_ID, 0, 0);
+			input_set_abs_params(dev, ABS_MT_POSITION_X,
+						0, touch.x, 0, 0);
+			input_set_abs_params(dev, ABS_MT_POSITION_Y,
+						0, touch.y, 0, 0);
+			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
+						0, 0, 0, 0);
+			break;
+		}
+	}
+
 	return w8001_command(w8001, W8001_CMD_START, false);
 }
 
@@ -208,6 +372,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	w8001->serio = serio;
 	w8001->id = serio->id.id;
 	w8001->dev = input_dev;
+	w8001->trkid[0] = w8001->trkid[1] = -1;
 	init_completion(&w8001->cmd_done);
 	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
 
@@ -221,6 +386,10 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_dev->keybit[BIT_WORD(BTN_TOOL_PEN)] |= BIT_MASK(BTN_TOOL_PEN);
+	input_dev->keybit[BIT_WORD(BTN_TOOL_RUBBER)] |= BIT_MASK(BTN_TOOL_RUBBER);
+	input_dev->keybit[BIT_WORD(BTN_STYLUS)] |= BIT_MASK(BTN_STYLUS);
+	input_dev->keybit[BIT_WORD(BTN_STYLUS2)] |= BIT_MASK(BTN_STYLUS2);
 
 	serio_set_drvdata(serio, w8001);
 	err = serio_open(serio, drv);
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cbfef1ea7e30..6b75c9f660ae 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -125,6 +125,8 @@ int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
 {
 	int power_adc = 0, auxval;
 	u16 power = 0;
+	int rc = 0;
+	int timeout = 0;
 
 	/* get codec */
 	mutex_lock(&wm->codec_mutex);
@@ -143,7 +145,9 @@ int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
 
 	/* Turn polling mode on to read AUX ADC */
 	wm->pen_probably_down = 1;
-	wm->codec->poll_sample(wm, adcsel, &auxval);
+
+	while (rc != RC_VALID && timeout++ < 5)
+		rc = wm->codec->poll_sample(wm, adcsel, &auxval);
 
 	if (power_adc)
 		wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000);
@@ -152,8 +156,15 @@ int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
 
 	wm->pen_probably_down = 0;
 
+	if (timeout >= 5) {
+		dev_err(wm->dev,
+			"timeout reading auxadc %d, disabling digitiser\n",
+			adcsel);
+		wm->codec->dig_enable(wm, false);
+	}
+
 	mutex_unlock(&wm->codec_mutex);
-	return auxval & 0xfff;
+	return (rc == RC_VALID ? auxval & 0xfff : -EBUSY);
 }
 EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc);
 
@@ -684,8 +695,7 @@ static int wm97xx_probe(struct device *dev)
  touch_reg_err:
 	platform_device_put(wm->touch_dev);
  touch_err:
-	platform_device_unregister(wm->battery_dev);
-	wm->battery_dev = NULL;
+	platform_device_del(wm->battery_dev);
  batt_reg_err:
 	platform_device_put(wm->battery_dev);
  batt_err: