Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 - big update to Wacom driver by Benjamin Tissoires, converting it to
   HID infrastructure and unifying USB and Bluetooth models
 - large update to ALPS driver by Hans de Goede, which adds support for
   newer touchpad models as well as cleans up and restructures the code
 - more changes to Atmel MXT driver, including device tree support
 - new driver for iPaq x3xxx touchscreen
 - driver for serial Wacom tablets
 - driver for Microchip's CAP1106
 - assorted cleanups and improvements to existing drover and input core

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
  Input: wacom - update the ABI doc according to latest changes
  Input: wacom - only register once the MODULE_* macros
  Input: HID - remove hid-wacom Bluetooth driver
  Input: wacom - add copyright note and bump version to 2.0
  Input: wacom - remove passing id for wacom_set_report
  Input: wacom - check for bluetooth protocol while setting OLEDs
  Input: wacom - handle Intuos 4 BT in wacom.ko
  Input: wacom - handle Graphire BT tablets in wacom.ko
  Input: wacom - prepare the driver to include BT devices
  Input: hyperv-keyboard - register as a wakeup source
  Input: imx_keypad - remove ifdef round PM methods
  Input: jornada720_ts - get rid of space indentation and use tab
  Input: jornada720_ts - switch to using managed resources
  Input: alps - Rushmore and v7 resolution support
  Input: mcs5000_ts - remove ifdef around power management methods
  Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
  Input: ads7846 - release resources on failure for clean exit
  Input: wacom - add support for 0x12C ISDv4 sensor
  Input: atmel_mxt_ts - use deep sleep mode when stopped
  ARM: dts: am437x-gp-evm: Update binding for touchscreen size
  ...

29 files changed, 2985 insertions, 5017 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index f7e79b481349..a3958c63d7d5 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -665,4 +665,14 @@ config KEYBOARD_CROS_EC
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_keyb.
 
+config KEYBOARD_CAP1106
+	tristate "Microchip CAP1106 touch sensor"
+	depends on OF && I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable the CAP1106 touch sensor driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cap1106.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 7504ae19049d..0a3345634d79 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
+obj-$(CONFIG_KEYBOARD_CAP1106)		+= cap1106.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
new file mode 100644
index 000000000000..f7d7a0d4ab4e
--- /dev/null
+++ b/drivers/input/keyboard/cap1106.c
@@ -0,0 +1,335 @@
+/*
+ * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor
+ *
+ * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106
+ *
+ * (c) 2014 Daniel Mack <linux@zonque.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+
+#define CAP1106_REG_MAIN_CONTROL	0x00
+#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
+#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
+#define CAP1106_REG_MAIN_CONTROL_DLSEEP		BIT(4)
+#define CAP1106_REG_GENERAL_STATUS	0x02
+#define CAP1106_REG_SENSOR_INPUT	0x03
+#define CAP1106_REG_NOISE_FLAG_STATUS	0x0a
+#define CAP1106_REG_SENOR_DELTA(X)	(0x10 + (X))
+#define CAP1106_REG_SENSITIVITY_CONTROL	0x1f
+#define CAP1106_REG_CONFIG		0x20
+#define CAP1106_REG_SENSOR_ENABLE	0x21
+#define CAP1106_REG_SENSOR_CONFIG	0x22
+#define CAP1106_REG_SENSOR_CONFIG2	0x23
+#define CAP1106_REG_SAMPLING_CONFIG	0x24
+#define CAP1106_REG_CALIBRATION		0x25
+#define CAP1106_REG_INT_ENABLE		0x26
+#define CAP1106_REG_REPEAT_RATE		0x28
+#define CAP1106_REG_MT_CONFIG		0x2a
+#define CAP1106_REG_MT_PATTERN_CONFIG	0x2b
+#define CAP1106_REG_MT_PATTERN		0x2d
+#define CAP1106_REG_RECALIB_CONFIG	0x2f
+#define CAP1106_REG_SENSOR_THRESH(X)	(0x30 + (X))
+#define CAP1106_REG_SENSOR_NOISE_THRESH	0x38
+#define CAP1106_REG_STANDBY_CHANNEL	0x40
+#define CAP1106_REG_STANDBY_CONFIG	0x41
+#define CAP1106_REG_STANDBY_SENSITIVITY	0x42
+#define CAP1106_REG_STANDBY_THRESH	0x43
+#define CAP1106_REG_CONFIG2		0x44
+#define CAP1106_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
+#define CAP1106_REG_SENSOR_CALIB	(0xb1 + (X))
+#define CAP1106_REG_SENSOR_CALIB_LSB1	0xb9
+#define CAP1106_REG_SENSOR_CALIB_LSB2	0xba
+#define CAP1106_REG_PRODUCT_ID		0xfd
+#define CAP1106_REG_MANUFACTURER_ID	0xfe
+#define CAP1106_REG_REVISION		0xff
+
+#define CAP1106_NUM_CHN 6
+#define CAP1106_PRODUCT_ID	0x55
+#define CAP1106_MANUFACTURER_ID	0x5d
+
+struct cap1106_priv {
+	struct regmap *regmap;
+	struct input_dev *idev;
+
+	/* config */
+	unsigned int keycodes[CAP1106_NUM_CHN];
+};
+
+static const struct reg_default cap1106_reg_defaults[] = {
+	{ CAP1106_REG_MAIN_CONTROL,		0x00 },
+	{ CAP1106_REG_GENERAL_STATUS,		0x00 },
+	{ CAP1106_REG_SENSOR_INPUT,		0x00 },
+	{ CAP1106_REG_NOISE_FLAG_STATUS,	0x00 },
+	{ CAP1106_REG_SENSITIVITY_CONTROL,	0x2f },
+	{ CAP1106_REG_CONFIG,			0x20 },
+	{ CAP1106_REG_SENSOR_ENABLE,		0x3f },
+	{ CAP1106_REG_SENSOR_CONFIG,		0xa4 },
+	{ CAP1106_REG_SENSOR_CONFIG2,		0x07 },
+	{ CAP1106_REG_SAMPLING_CONFIG,		0x39 },
+	{ CAP1106_REG_CALIBRATION,		0x00 },
+	{ CAP1106_REG_INT_ENABLE,		0x3f },
+	{ CAP1106_REG_REPEAT_RATE,		0x3f },
+	{ CAP1106_REG_MT_CONFIG,		0x80 },
+	{ CAP1106_REG_MT_PATTERN_CONFIG,	0x00 },
+	{ CAP1106_REG_MT_PATTERN,		0x3f },
+	{ CAP1106_REG_RECALIB_CONFIG,		0x8a },
+	{ CAP1106_REG_SENSOR_THRESH(0),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(1),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(2),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(3),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(4),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(5),		0x40 },
+	{ CAP1106_REG_SENSOR_NOISE_THRESH,	0x01 },
+	{ CAP1106_REG_STANDBY_CHANNEL,		0x00 },
+	{ CAP1106_REG_STANDBY_CONFIG,		0x39 },
+	{ CAP1106_REG_STANDBY_SENSITIVITY,	0x02 },
+	{ CAP1106_REG_STANDBY_THRESH,		0x40 },
+	{ CAP1106_REG_CONFIG2,			0x40 },
+	{ CAP1106_REG_SENSOR_CALIB_LSB1,	0x00 },
+	{ CAP1106_REG_SENSOR_CALIB_LSB2,	0x00 },
+};
+
+static bool cap1106_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CAP1106_REG_MAIN_CONTROL:
+	case CAP1106_REG_SENSOR_INPUT:
+	case CAP1106_REG_SENOR_DELTA(0):
+	case CAP1106_REG_SENOR_DELTA(1):
+	case CAP1106_REG_SENOR_DELTA(2):
+	case CAP1106_REG_SENOR_DELTA(3):
+	case CAP1106_REG_SENOR_DELTA(4):
+	case CAP1106_REG_SENOR_DELTA(5):
+	case CAP1106_REG_PRODUCT_ID:
+	case CAP1106_REG_MANUFACTURER_ID:
+	case CAP1106_REG_REVISION:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config cap1106_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CAP1106_REG_REVISION,
+	.reg_defaults = cap1106_reg_defaults,
+
+	.num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = cap1106_volatile_reg,
+};
+
+static irqreturn_t cap1106_thread_func(int irq_num, void *data)
+{
+	struct cap1106_priv *priv = data;
+	unsigned int status;
+	int ret, i;
+
+	/*
+	 * Deassert interrupt. This needs to be done before reading the status
+	 * registers, which will not carry valid values otherwise.
+	 */
+	ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < CAP1106_NUM_CHN; i++)
+		input_report_key(priv->idev, priv->keycodes[i],
+				 status & (1 << i));
+
+	input_sync(priv->idev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep)
+{
+	return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
+				  CAP1106_REG_MAIN_CONTROL_DLSEEP,
+				  sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0);
+}
+
+static int cap1106_input_open(struct input_dev *idev)
+{
+	struct cap1106_priv *priv = input_get_drvdata(idev);
+
+	return cap1106_set_sleep(priv, false);
+}
+
+static void cap1106_input_close(struct input_dev *idev)
+{
+	struct cap1106_priv *priv = input_get_drvdata(idev);
+
+	cap1106_set_sleep(priv, true);
+}
+
+static int cap1106_i2c_probe(struct i2c_client *i2c_client,
+			     const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c_client->dev;
+	struct cap1106_priv *priv;
+	struct device_node *node;
+	int i, error, irq, gain = 0;
+	unsigned int val, rev;
+	u32 gain32, keycodes[CAP1106_NUM_CHN];
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP1106_PRODUCT_ID) {
+		dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP1106_PRODUCT_ID);
+		return -ENODEV;
+	}
+
+	error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP1106_MANUFACTURER_ID) {
+		dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP1106_MANUFACTURER_ID);
+		return -ENODEV;
+	}
+
+	error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev);
+	if (error < 0)
+		return error;
+
+	dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev);
+	i2c_set_clientdata(i2c_client, priv);
+	node = dev->of_node;
+
+	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
+		if (is_power_of_2(gain32) && gain32 <= 8)
+			gain = ilog2(gain32);
+		else
+			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
+	}
+
+	BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
+
+	/* Provide some useful defaults */
+	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
+		keycodes[i] = KEY_A + i;
+
+	of_property_read_u32_array(node, "linux,keycodes",
+				   keycodes, ARRAY_SIZE(keycodes));
+
+	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
+		priv->keycodes[i] = keycodes[i];
+
+	error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
+				   CAP1106_REG_MAIN_CONTROL_GAIN_MASK,
+				   gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT);
+	if (error)
+		return error;
+
+	/* Disable autorepeat. The Linux input system has its own handling. */
+	error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0);
+	if (error)
+		return error;
+
+	priv->idev = devm_input_allocate_device(dev);
+	if (!priv->idev)
+		return -ENOMEM;
+
+	priv->idev->name = "CAP1106 capacitive touch sensor";
+	priv->idev->id.bustype = BUS_I2C;
+	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
+
+	if (of_property_read_bool(node, "autorepeat"))
+		__set_bit(EV_REP, priv->idev->evbit);
+
+	for (i = 0; i < CAP1106_NUM_CHN; i++)
+		__set_bit(priv->keycodes[i], priv->idev->keybit);
+
+	priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
+	priv->idev->id.product = CAP1106_PRODUCT_ID;
+	priv->idev->id.version = rev;
+
+	priv->idev->open = cap1106_input_open;
+	priv->idev->close = cap1106_input_close;
+
+	input_set_drvdata(priv->idev, priv);
+
+	/*
+	 * Put the device in deep sleep mode for now.
+	 * ->open() will bring it back once the it is actually needed.
+	 */
+	cap1106_set_sleep(priv, true);
+
+	error = input_register_device(priv->idev);
+	if (error)
+		return error;
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq) {
+		dev_err(dev, "Unable to parse or map IRQ\n");
+		return -ENXIO;
+	}
+
+	error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func,
+					  IRQF_ONESHOT, dev_name(dev), priv);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id cap1106_dt_ids[] = {
+	{ .compatible = "microchip,cap1106", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cap1106_dt_ids);
+
+static const struct i2c_device_id cap1106_i2c_ids[] = {
+	{ "cap1106", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids);
+
+static struct i2c_driver cap1106_i2c_driver = {
+	.driver = {
+		.name	= "cap1106",
+		.owner	= THIS_MODULE,
+		.of_match_table = cap1106_dt_ids,
+	},
+	.id_table	= cap1106_i2c_ids,
+	.probe		= cap1106_i2c_probe,
+};
+
+module_i2c_driver(cap1106_i2c_driver);
+
+MODULE_ALIAS("platform:cap1106");
+MODULE_DESCRIPTION("Microchip CAP1106 driver");
+MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 8280cb16260b..20a99c368d16 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -531,8 +531,7 @@ static int imx_keypad_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int imx_kbd_suspend(struct device *dev)
+static int __maybe_unused imx_kbd_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
@@ -552,7 +551,7 @@ static int imx_kbd_suspend(struct device *dev)
 	return 0;
 }
 
-static int imx_kbd_resume(struct device *dev)
+static int __maybe_unused imx_kbd_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
@@ -575,7 +574,6 @@ err_clk:
 
 	return ret;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume);
 
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index 430b54539720..faa6da53eba8 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -203,12 +203,17 @@ static int max7359_probe(struct i2c_client *client,
 
 	dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret);
 
-	keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!keypad || !input_dev) {
+	keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad),
+			      GFP_KERNEL);
+	if (!keypad) {
 		dev_err(&client->dev, "failed to allocate memory\n");
-		error = -ENOMEM;
-		goto failed_free_mem;
+		return -ENOMEM;
+	}
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "failed to allocate input device\n");
+		return -ENOMEM;
 	}
 
 	keypad->client = client;
@@ -230,19 +235,20 @@ static int max7359_probe(struct i2c_client *client,
 
 	max7359_build_keycode(keypad, keymap_data);
 
-	error = request_threaded_irq(client->irq, NULL, max7359_interrupt,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     client->name, keypad);
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  max7359_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  client->name, keypad);
 	if (error) {
 		dev_err(&client->dev, "failed to register interrupt\n");
-		goto failed_free_mem;
+		return error;
 	}
 
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&client->dev, "failed to register input device\n");
-		goto failed_free_irq;
+		return error;
 	}
 
 	/* Initialize MAX7359 */
@@ -252,24 +258,6 @@ static int max7359_probe(struct i2c_client *client,
 	device_init_wakeup(&client->dev, 1);
 
 	return 0;
-
-failed_free_irq:
-	free_irq(client->irq, keypad);
-failed_free_mem:
-	input_free_device(input_dev);
-	kfree(keypad);
-	return error;
-}
-
-static int max7359_remove(struct i2c_client *client)
-{
-	struct max7359_keypad *keypad = i2c_get_clientdata(client);
-
-	free_irq(client->irq, keypad);
-	input_unregister_device(keypad->input_dev);
-	kfree(keypad);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -313,7 +301,6 @@ static struct i2c_driver max7359_i2c_driver = {
 		.pm   = &max7359_pm,
 	},
 	.probe		= max7359_probe,
-	.remove		= max7359_remove,
 	.id_table	= max7359_ids,
 };
 
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 01f3b5b300f3..a3fe4a990cc9 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -392,7 +392,6 @@ static void keyspan_irq_recv(struct urb *urb)
 
 	default:
 		goto resubmit;
-		break;
 	}
 
 	if (debug)
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index 5a6334be30b8..e34dfc29beb3 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -83,6 +83,9 @@ soc_button_device_create(struct pnp_dev *pdev,
 				       sizeof(*gpio_keys_pdata) +
 					sizeof(*gpio_keys) * MAX_NBUTTONS,
 				       GFP_KERNEL);
+	if (!gpio_keys_pdata)
+		return ERR_PTR(-ENOMEM);
+
 	gpio_keys = (void *)(gpio_keys_pdata + 1);
 
 	for (info = button_info; info->name; info++) {
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 856936247500..421e29e4cd81 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -311,7 +311,14 @@ static int uinput_open(struct inode *inode, struct file *file)
 static int uinput_validate_absbits(struct input_dev *dev)
 {
 	unsigned int cnt;
-	int retval = 0;
+	int nslot;
+
+	if (!test_bit(EV_ABS, dev->evbit))
+		return 0;
+
+	/*
+	 * Check if absmin/absmax/absfuzz/absflat are sane.
+	 */
 
 	for (cnt = 0; cnt < ABS_CNT; cnt++) {
 		int min, max;
@@ -327,8 +334,7 @@ static int uinput_validate_absbits(struct input_dev *dev)
 				UINPUT_NAME, cnt,
 				input_abs_get_min(dev, cnt),
 				input_abs_get_max(dev, cnt));
-			retval = -EINVAL;
-			break;
+			return -EINVAL;
 		}
 
 		if (input_abs_get_flat(dev, cnt) >
@@ -340,11 +346,18 @@ static int uinput_validate_absbits(struct input_dev *dev)
 				input_abs_get_flat(dev, cnt),
 				input_abs_get_min(dev, cnt),
 				input_abs_get_max(dev, cnt));
-			retval = -EINVAL;
-			break;
+			return -EINVAL;
 		}
 	}
-	return retval;
+
+	if (test_bit(ABS_MT_SLOT, dev->absbit)) {
+		nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
+		input_mt_init_slots(dev, nslot, 0);
+	} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
+		input_set_events_per_packet(dev, 60);
+	}
+
+	return 0;
 }
 
 static int uinput_allocate_device(struct uinput_device *udev)
@@ -410,19 +423,9 @@ static int uinput_setup_device(struct uinput_device *udev,
 		input_abs_set_flat(dev, i, user_dev->absflat[i]);
 	}
 
-	/* check if absmin/absmax/absfuzz/absflat are filled as
-	 * told in Documentation/input/input-programming.txt */
-	if (test_bit(EV_ABS, dev->evbit)) {
-		retval = uinput_validate_absbits(dev);
-		if (retval < 0)
-			goto exit;
-		if (test_bit(ABS_MT_SLOT, dev->absbit)) {
-			int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
-			input_mt_init_slots(dev, nslot, 0);
-		} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
-			input_set_events_per_packet(dev, 60);
-		}
-	}
+	retval = uinput_validate_absbits(dev);
+	if (retval < 0)
+		goto exit;
 
 	udev->state = UIST_SETUP_COMPLETE;
 	retval = count;
@@ -720,6 +723,12 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 	}
 
 	switch (cmd) {
+		case UI_GET_VERSION:
+			if (put_user(UINPUT_VERSION,
+				     (unsigned int __user *)p))
+				retval = -EFAULT;
+			goto out;
+
 		case UI_DEV_CREATE:
 			retval = uinput_create_device(udev);
 			goto out;
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index fb15c64ffb95..a59a1a64b674 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -99,6 +99,8 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
 #define ALPS_FOUR_BUTTONS	0x40	/* 4 direction button present */
 #define ALPS_PS2_INTERLEAVED	0x80	/* 3-byte PS/2 packet interleaved with
 					   6-byte ALPS packet */
+#define ALPS_IS_RUSHMORE	0x100	/* device is a rushmore */
+#define ALPS_BUTTONPAD		0x200	/* device is a clickpad */
 
 static const struct alps_model_info alps_model_data[] = {
 	{ { 0x32, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },	/* Toshiba Salellite Pro M10 */
@@ -281,11 +283,10 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
  *
  * The bitmaps don't have enough data to track fingers, so this function
  * only generates points representing a bounding box of at most two contacts.
- * These two points are returned in x1, y1, x2, and y2.
+ * These two points are returned in fields->mt.
  */
 static void alps_process_bitmap_dolphin(struct alps_data *priv,
-					struct alps_fields *fields,
-					int *x1, int *y1, int *x2, int *y2)
+					struct alps_fields *fields)
 {
 	int box_middle_x, box_middle_y;
 	unsigned int x_map, y_map;
@@ -308,8 +309,6 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv,
 	if (x_msb > priv->x_bits || y_msb > priv->y_bits)
 		return;
 
-	*x1 = *y1 = *x2 = *y2 = 0;
-
 	if (fields->fingers > 1) {
 		start_bit = priv->x_bits - x_msb;
 		end_bit = priv->x_bits - x_lsb;
@@ -320,10 +319,35 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv,
 		end_bit = y_msb - 1;
 		box_middle_y = (priv->y_max * (start_bit + end_bit)) /
 				(2 * (priv->y_bits - 1));
-		*x1 = fields->x;
-		*y1 = fields->y;
-		*x2 = 2 * box_middle_x - *x1;
-		*y2 = 2 * box_middle_y - *y1;
+		fields->mt[0] = fields->st;
+		fields->mt[1].x = 2 * box_middle_x - fields->mt[0].x;
+		fields->mt[1].y = 2 * box_middle_y - fields->mt[0].y;
+	}
+}
+
+static void alps_get_bitmap_points(unsigned int map,
+				   struct alps_bitmap_point *low,
+				   struct alps_bitmap_point *high,
+				   int *fingers)
+{
+	struct alps_bitmap_point *point;
+	int i, bit, prev_bit = 0;
+
+	point = low;
+	for (i = 0; map != 0; i++, map >>= 1) {
+		bit = map & 1;
+		if (bit) {
+			if (!prev_bit) {
+				point->start_bit = i;
+				point->num_bits = 0;
+				(*fingers)++;
+			}
+			point->num_bits++;
+		} else {
+			if (prev_bit)
+				point = high;
+		}
+		prev_bit = bit;
 	}
 }
 
@@ -334,71 +358,21 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv,
  *
  * The bitmaps don't have enough data to track fingers, so this function
  * only generates points representing a bounding box of all contacts.
- * These points are returned in x1, y1, x2, and y2 when the return value
+ * These points are returned in fields->mt when the return value
  * is greater than 0.
  */
 static int alps_process_bitmap(struct alps_data *priv,
-			       unsigned int x_map, unsigned int y_map,
-			       int *x1, int *y1, int *x2, int *y2)
+			       struct alps_fields *fields)
 {
-	struct alps_bitmap_point {
-		int start_bit;
-		int num_bits;
-	};
-
-	int fingers_x = 0, fingers_y = 0, fingers;
-	int i, bit, prev_bit;
+	int i, fingers_x = 0, fingers_y = 0, fingers;
 	struct alps_bitmap_point x_low = {0,}, x_high = {0,};
 	struct alps_bitmap_point y_low = {0,}, y_high = {0,};
-	struct alps_bitmap_point *point;
 
-	if (!x_map || !y_map)
+	if (!fields->x_map || !fields->y_map)
 		return 0;
 
-	*x1 = *y1 = *x2 = *y2 = 0;
-
-	prev_bit = 0;
-	point = &x_low;
-	for (i = 0; x_map != 0; i++, x_map >>= 1) {
-		bit = x_map & 1;
-		if (bit) {
-			if (!prev_bit) {
-				point->start_bit = i;
-				fingers_x++;
-			}
-			point->num_bits++;
-		} else {
-			if (prev_bit)
-				point = &x_high;
-			else
-				point->num_bits = 0;
-		}
-		prev_bit = bit;
-	}
-
-	/*
-	 * y bitmap is reversed for what we need (lower positions are in
-	 * higher bits), so we process from the top end.
-	 */
-	y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits);
-	prev_bit = 0;
-	point = &y_low;
-	for (i = 0; y_map != 0; i++, y_map <<= 1) {
-		bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1));
-		if (bit) {
-			if (!prev_bit) {
-				point->start_bit = i;
-				fingers_y++;
-			}
-			point->num_bits++;
-		} else {
-			if (prev_bit)
-				point = &y_high;
-			else
-				point->num_bits = 0;
-		}
-		prev_bit = bit;
-	}
+	alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x);
+	alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y);
 
 	/*
 	 * Fingers can overlap, so we use the maximum count of fingers
@@ -407,58 +381,91 @@ static int alps_process_bitmap(struct alps_data *priv,
 	fingers = max(fingers_x, fingers_y);
 
 	/*
-	 * If total fingers is > 1 but either axis reports only a single
-	 * contact, we have overlapping or adjacent fingers. For the
-	 * purposes of creating a bounding box, divide the single contact
-	 * (roughly) equally between the two points.
+	 * If an axis reports only a single contact, we have overlapping or
+	 * adjacent fingers. Divide the single contact between the two points.
 	 */
-	if (fingers > 1) {
-		if (fingers_x == 1) {
-			i = x_low.num_bits / 2;
-			x_low.num_bits = x_low.num_bits - i;
-			x_high.start_bit = x_low.start_bit + i;
-			x_high.num_bits = max(i, 1);
-		} else if (fingers_y == 1) {
-			i = y_low.num_bits / 2;
-			y_low.num_bits = y_low.num_bits - i;
-			y_high.start_bit = y_low.start_bit + i;
-			y_high.num_bits = max(i, 1);
-		}
+	if (fingers_x == 1) {
+		i = (x_low.num_bits - 1) / 2;
+		x_low.num_bits = x_low.num_bits - i;
+		x_high.start_bit = x_low.start_bit + i;
+		x_high.num_bits = max(i, 1);
+	}
+	if (fingers_y == 1) {
+		i = (y_low.num_bits - 1) / 2;
+		y_low.num_bits = y_low.num_bits - i;
+		y_high.start_bit = y_low.start_bit + i;
+		y_high.num_bits = max(i, 1);
 	}
 
-	*x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
-	      (2 * (priv->x_bits - 1));
-	*y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
-	      (2 * (priv->y_bits - 1));
-
-	if (fingers > 1) {
-		*x2 = (priv->x_max *
-		       (2 * x_high.start_bit + x_high.num_bits - 1)) /
-		      (2 * (priv->x_bits - 1));
-		*y2 = (priv->y_max *
-		       (2 * y_high.start_bit + y_high.num_bits - 1)) /
-		      (2 * (priv->y_bits - 1));
+	fields->mt[0].x =
+		(priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+		(2 * (priv->x_bits - 1));
+	fields->mt[0].y =
+		(priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+		(2 * (priv->y_bits - 1));
+
+	fields->mt[1].x =
+		(priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) /
+		(2 * (priv->x_bits - 1));
+	fields->mt[1].y =
+		(priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) /
+		(2 * (priv->y_bits - 1));
+
+	/* y-bitmap order is reversed, except on rushmore */
+	if (!(priv->flags & ALPS_IS_RUSHMORE)) {
+		fields->mt[0].y = priv->y_max - fields->mt[0].y;
+		fields->mt[1].y = priv->y_max - fields->mt[1].y;
 	}
 
 	return fingers;
 }
 
-static void alps_set_slot(struct input_dev *dev, int slot, bool active,
-			  int x, int y)
+static void alps_set_slot(struct input_dev *dev, int slot, int x, int y)
 {
 	input_mt_slot(dev, slot);
-	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
-	if (active) {
-		input_report_abs(dev, ABS_MT_POSITION_X, x);
-		input_report_abs(dev, ABS_MT_POSITION_Y, y);
-	}
+	input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
+	input_report_abs(dev, ABS_MT_POSITION_X, x);
+	input_report_abs(dev, ABS_MT_POSITION_Y, y);
 }
 
-static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
-				     int x1, int y1, int x2, int y2)
+static void alps_report_mt_data(struct psmouse *psmouse, int n)
 {
-	alps_set_slot(dev, 0, num_fingers != 0, x1, y1);
-	alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
+	struct alps_data *priv = psmouse->private;
+	struct input_dev *dev = psmouse->dev;
+	struct alps_fields *f = &priv->f;
+	int i, slot[MAX_TOUCHES];
+
+	input_mt_assign_slots(dev, slot, f->mt, n);
+	for (i = 0; i < n; i++)
+		alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y);
+
+	input_mt_sync_frame(dev);
+}
+
+static void alps_report_semi_mt_data(struct psmouse *psmouse, int fingers)
+{
+	struct alps_data *priv = psmouse->private;
+	struct input_dev *dev = psmouse->dev;
+	struct alps_fields *f = &priv->f;
+
+	/* Use st data when we don't have mt data */
+	if (fingers < 2) {
+		f->mt[0].x = f->st.x;
+		f->mt[0].y = f->st.y;
+		fingers = f->pressure > 0 ? 1 : 0;
+	}
+
+	alps_report_mt_data(psmouse, (fingers <= 2) ? fingers : 2);
+
+	input_mt_report_finger_count(dev, fingers);
+
+	input_report_key(dev, BTN_LEFT, f->left);
+	input_report_key(dev, BTN_RIGHT, f->right);
+	input_report_key(dev, BTN_MIDDLE, f->middle);
+
+	input_report_abs(dev, ABS_PRESSURE, f->pressure);
+
+	input_sync(dev);
 }
 
 static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
@@ -532,7 +539,7 @@ static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
 	f->ts_middle = !!(p[3] & 0x40);
 }
 
-static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
+static int alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
 				 struct psmouse *psmouse)
 {
 	f->first_mp = !!(p[4] & 0x40);
@@ -546,24 +553,31 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
 		   ((p[2] & 0x7f) << 1) |
 		   (p[4] & 0x01);
 
-	f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
+	f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
 	       ((p[0] & 0x30) >> 4);
-	f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
-	f->z = p[5] & 0x7f;
+	f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
+	f->pressure = p[5] & 0x7f;
 
 	alps_decode_buttons_v3(f, p);
+
+	return 0;
 }
 
-static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
+static int alps_decode_rushmore(struct alps_fields *f, unsigned char *p,
 				 struct psmouse *psmouse)
 {
 	alps_decode_pinnacle(f, p, psmouse);
 
+	/* Rushmore's packet decode has a bit difference with Pinnacle's */
+	f->is_mp = !!(p[5] & 0x40);
+	f->fingers = max((p[5] & 0x3), ((p[5] >> 2) & 0x3)) + 1;
 	f->x_map |= (p[5] & 0x10) << 11;
 	f->y_map |= (p[5] & 0x20) << 6;
+
+	return 0;
 }
 
-static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
+static int alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
 				struct psmouse *psmouse)
 {
 	u64 palm_data = 0;
@@ -573,9 +587,9 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
 	f->is_mp = !!(p[0] & 0x20);
 
 	if (!f->is_mp) {
-		f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
-		f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
-		f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+		f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+		f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+		f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f;
 		alps_decode_buttons_v3(f, p);
 	} else {
 		f->fingers = ((p[0] & 0x6) >> 1 |
@@ -596,19 +610,21 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
 		f->x_map = (palm_data >> priv->y_bits) &
 			   (BIT(priv->x_bits) - 1);
 	}
+
+	return 0;
 }
 
 static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
 	unsigned char *packet = psmouse->packet;
-	struct input_dev *dev = psmouse->dev;
 	struct input_dev *dev2 = priv->dev2;
-	int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
-	int fingers = 0, bmap_fn;
-	struct alps_fields f = {0};
+	struct alps_fields *f = &priv->f;
+	int fingers = 0;
 
-	priv->decode_fields(&f, packet, psmouse);
+	memset(f, 0, sizeof(*f));
+
+	priv->decode_fields(f, packet, psmouse);
 
 	/*
 	 * There's no single feature of touchpad position and bitmap packets
@@ -623,22 +639,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 		 * packet. Check for this, and when it happens process the
 		 * position packet as usual.
 		 */
-		if (f.is_mp) {
-			fingers = f.fingers;
+		if (f->is_mp) {
+			fingers = f->fingers;
 			if (priv->proto_version == ALPS_PROTO_V3) {
-				bmap_fn = alps_process_bitmap(priv, f.x_map,
-							      f.y_map, &x1, &y1,
-							      &x2, &y2);
-
-				/*
-				 * We shouldn't report more than one finger if
-				 * we don't have two coordinates.
-				 */
-				if (fingers > 1 && bmap_fn < 2)
-					fingers = bmap_fn;
+				if (alps_process_bitmap(priv, f) == 0)
+					fingers = 0; /* Use st data */
 
 				/* Now process position packet */
-				priv->decode_fields(&f, priv->multi_data,
+				priv->decode_fields(f, priv->multi_data,
 						    psmouse);
 			} else {
 				/*
@@ -647,15 +655,14 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 				 * calculate Pt2, so we need to do position
 				 * packet decode first.
 				 */
-				priv->decode_fields(&f, priv->multi_data,
+				priv->decode_fields(f, priv->multi_data,
 						    psmouse);
 
 				/*
 				 * Since Dolphin's finger number is reliable,
 				 * there is no need to compare with bmap_fn.
 				 */
-				alps_process_bitmap_dolphin(priv, &f, &x1, &y1,
-							    &x2, &y2);
+				alps_process_bitmap_dolphin(priv, f);
 			}
 		} else {
 			priv->multi_packet = 0;
@@ -670,10 +677,10 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 	 * out misidentified bitmap packets, we reject anything with this
 	 * bit set.
 	 */
-	if (f.is_mp)
+	if (f->is_mp)
 		return;
 
-	if (!priv->multi_packet && f.first_mp) {
+	if (!priv->multi_packet && f->first_mp) {
 		priv->multi_packet = 1;
 		memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
 		return;
@@ -687,44 +694,15 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 	 * with x, y, and z all zero, so these seem to be flukes.
 	 * Ignore them.
 	 */
-	if (f.x && f.y && !f.z)
+	if (f->st.x && f->st.y && !f->pressure)
 		return;
 
-	/*
-	 * If we don't have MT data or the bitmaps were empty, we have
-	 * to rely on ST data.
-	 */
-	if (!fingers) {
-		x1 = f.x;
-		y1 = f.y;
-		fingers = f.z > 0 ? 1 : 0;
-	}
-
-	if (f.z >= 64)
-		input_report_key(dev, BTN_TOUCH, 1);
-	else
-		input_report_key(dev, BTN_TOUCH, 0);
-
-	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
-
-	input_mt_report_finger_count(dev, fingers);
-
-	input_report_key(dev, BTN_LEFT, f.left);
-	input_report_key(dev, BTN_RIGHT, f.right);
-	input_report_key(dev, BTN_MIDDLE, f.middle);
-
-	if (f.z > 0) {
-		input_report_abs(dev, ABS_X, f.x);
-		input_report_abs(dev, ABS_Y, f.y);
-	}
-	input_report_abs(dev, ABS_PRESSURE, f.z);
-
-	input_sync(dev);
+	alps_report_semi_mt_data(psmouse, fingers);
 
 	if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
-		input_report_key(dev2, BTN_LEFT, f.ts_left);
-		input_report_key(dev2, BTN_RIGHT, f.ts_right);
-		input_report_key(dev2, BTN_MIDDLE, f.ts_middle);
+		input_report_key(dev2, BTN_LEFT, f->ts_left);
+		input_report_key(dev2, BTN_RIGHT, f->ts_right);
+		input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
 		input_sync(dev2);
 	}
 }
@@ -823,13 +801,8 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
 	unsigned char *packet = psmouse->packet;
-	struct input_dev *dev = psmouse->dev;
+	struct alps_fields *f = &priv->f;
 	int offset;
-	int x, y, z;
-	int left, right;
-	int x1, y1, x2, y2;
-	int fingers = 0;
-	unsigned int x_bitmap, y_bitmap;
 
 	/*
 	 * v4 has a 6-byte encoding for bitmap data, but this data is
@@ -851,71 +824,207 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
 	if (++priv->multi_packet > 2) {
 		priv->multi_packet = 0;
 
-		x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) |
+		f->x_map = ((priv->multi_data[2] & 0x1f) << 10) |
 			   ((priv->multi_data[3] & 0x60) << 3) |
 			   ((priv->multi_data[0] & 0x3f) << 2) |
 			   ((priv->multi_data[1] & 0x60) >> 5);
-		y_bitmap = ((priv->multi_data[5] & 0x01) << 10) |
+		f->y_map = ((priv->multi_data[5] & 0x01) << 10) |
 			   ((priv->multi_data[3] & 0x1f) << 5) |
 			    (priv->multi_data[1] & 0x1f);
 
-		fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap,
-					      &x1, &y1, &x2, &y2);
-
-		/* Store MT data.*/
-		priv->fingers = fingers;
-		priv->x1 = x1;
-		priv->x2 = x2;
-		priv->y1 = y1;
-		priv->y2 = y2;
+		f->fingers = alps_process_bitmap(priv, f);
 	}
 
-	left = packet[4] & 0x01;
-	right = packet[4] & 0x02;
+	f->left = packet[4] & 0x01;
+	f->right = packet[4] & 0x02;
 
-	x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
-	    ((packet[0] & 0x30) >> 4);
-	y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
-	z = packet[5] & 0x7f;
+	f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
+		  ((packet[0] & 0x30) >> 4);
+	f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
+	f->pressure = packet[5] & 0x7f;
 
-	/*
-	 * If there were no contacts in the bitmap, use ST
-	 * points in MT reports.
-	 * If there were two contacts or more, report MT data.
-	 */
-	if (priv->fingers < 2) {
-		x1 = x;
-		y1 = y;
-		fingers = z > 0 ? 1 : 0;
-	} else {
-		fingers = priv->fingers;
-		x1 = priv->x1;
-		x2 = priv->x2;
-		y1 = priv->y1;
-		y2 = priv->y2;
+	alps_report_semi_mt_data(psmouse, f->fingers);
+}
+
+static bool alps_is_valid_package_v7(struct psmouse *psmouse)
+{
+	switch (psmouse->pktcnt) {
+	case 3:
+		return (psmouse->packet[2] & 0x40) == 0x40;
+	case 4:
+		return (psmouse->packet[3] & 0x48) == 0x48;
+	case 6:
+		return (psmouse->packet[5] & 0x40) == 0x00;
 	}
+	return true;
+}
 
-	if (z >= 64)
-		input_report_key(dev, BTN_TOUCH, 1);
+static unsigned char alps_get_packet_id_v7(char *byte)
+{
+	unsigned char packet_id;
+
+	if (byte[4] & 0x40)
+		packet_id = V7_PACKET_ID_TWO;
+	else if (byte[4] & 0x01)
+		packet_id = V7_PACKET_ID_MULTI;
+	else if ((byte[0] & 0x10) && !(byte[4] & 0x43))
+		packet_id = V7_PACKET_ID_NEW;
+	else if (byte[1] == 0x00 && byte[4] == 0x00)
+		packet_id = V7_PACKET_ID_IDLE;
 	else
-		input_report_key(dev, BTN_TOUCH, 0);
+		packet_id = V7_PACKET_ID_UNKNOWN;
 
-	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+	return packet_id;
+}
 
-	input_mt_report_finger_count(dev, fingers);
+static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
+					  unsigned char *pkt,
+					  unsigned char pkt_id)
+{
+	mt[0].x = ((pkt[2] & 0x80) << 4);
+	mt[0].x |= ((pkt[2] & 0x3F) << 5);
+	mt[0].x |= ((pkt[3] & 0x30) >> 1);
+	mt[0].x |= (pkt[3] & 0x07);
+	mt[0].y = (pkt[1] << 3) | (pkt[0] & 0x07);
+
+	mt[1].x = ((pkt[3] & 0x80) << 4);
+	mt[1].x |= ((pkt[4] & 0x80) << 3);
+	mt[1].x |= ((pkt[4] & 0x3F) << 4);
+	mt[1].y = ((pkt[5] & 0x80) << 3);
+	mt[1].y |= ((pkt[5] & 0x3F) << 4);
+
+	switch (pkt_id) {
+	case V7_PACKET_ID_TWO:
+		mt[1].x &= ~0x000F;
+		mt[1].y |= 0x000F;
+		break;
 
-	input_report_key(dev, BTN_LEFT, left);
-	input_report_key(dev, BTN_RIGHT, right);
+	case V7_PACKET_ID_MULTI:
+		mt[1].x &= ~0x003F;
+		mt[1].y &= ~0x0020;
+		mt[1].y |= ((pkt[4] & 0x02) << 4);
+		mt[1].y |= 0x001F;
+		break;
 
-	if (z > 0) {
-		input_report_abs(dev, ABS_X, x);
-		input_report_abs(dev, ABS_Y, y);
+	case V7_PACKET_ID_NEW:
+		mt[1].x &= ~0x003F;
+		mt[1].x |= (pkt[0] & 0x20);
+		mt[1].y |= 0x000F;
+		break;
 	}
-	input_report_abs(dev, ABS_PRESSURE, z);
+
+	mt[0].y = 0x7FF - mt[0].y;
+	mt[1].y = 0x7FF - mt[1].y;
+}
+
+static int alps_get_mt_count(struct input_mt_pos *mt)
+{
+	int i;
+
+	for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
+		/* empty */;
+
+	return i;
+}
+
+static int alps_decode_packet_v7(struct alps_fields *f,
+				  unsigned char *p,
+				  struct psmouse *psmouse)
+{
+	unsigned char pkt_id;
+
+	pkt_id = alps_get_packet_id_v7(p);
+	if (pkt_id == V7_PACKET_ID_IDLE)
+		return 0;
+	if (pkt_id == V7_PACKET_ID_UNKNOWN)
+		return -1;
+
+	alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
+
+	if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
+		f->left = (p[0] & 0x80) >> 7;
+		f->right = (p[0] & 0x20) >> 5;
+		f->middle = (p[0] & 0x10) >> 4;
+	}
+
+	if (pkt_id == V7_PACKET_ID_TWO)
+		f->fingers = alps_get_mt_count(f->mt);
+	else if (pkt_id == V7_PACKET_ID_MULTI)
+		f->fingers = 3 + (p[5] & 0x03);
+
+	return 0;
+}
+
+static void alps_process_trackstick_packet_v7(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	struct input_dev *dev2 = priv->dev2;
+	int x, y, z, left, right, middle;
+
+	/*
+	 *        b7 b6 b5 b4 b3 b2 b1 b0
+	 * Byte0   0  1  0  0  1  0  0  0
+	 * Byte1   1  1  *  *  1  M  R  L
+	 * Byte2  X7  1 X5 X4 X3 X2 X1 X0
+	 * Byte3  Z6  1 Y6 X6  1 Y2 Y1 Y0
+	 * Byte4  Y7  0 Y5 Y4 Y3  1  1  0
+	 * Byte5 T&P  0 Z5 Z4 Z3 Z2 Z1 Z0
+	 * M / R / L: Middle / Right / Left button
+	 */
+
+	x = ((packet[2] & 0xbf)) | ((packet[3] & 0x10) << 2);
+	y = (packet[3] & 0x07) | (packet[4] & 0xb8) |
+	    ((packet[3] & 0x20) << 1);
+	z = (packet[5] & 0x3f) | ((packet[3] & 0x80) >> 1);
+
+	left = (packet[1] & 0x01);
+	right = (packet[1] & 0x02) >> 1;
+	middle = (packet[1] & 0x04) >> 2;
+
+	/* Divide 2 since trackpoint's speed is too fast */
+	input_report_rel(dev2, REL_X, (char)x / 2);
+	input_report_rel(dev2, REL_Y, -((char)y / 2));
+
+	input_report_key(dev2, BTN_LEFT, left);
+	input_report_key(dev2, BTN_RIGHT, right);
+	input_report_key(dev2, BTN_MIDDLE, middle);
+
+	input_sync(dev2);
+}
+
+static void alps_process_touchpad_packet_v7(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	struct input_dev *dev = psmouse->dev;
+	struct alps_fields *f = &priv->f;
+
+	memset(f, 0, sizeof(*f));
+
+	if (priv->decode_fields(f, psmouse->packet, psmouse))
+		return;
+
+	alps_report_mt_data(psmouse, alps_get_mt_count(f->mt));
+
+	input_mt_report_finger_count(dev, f->fingers);
+
+	input_report_key(dev, BTN_LEFT, f->left);
+	input_report_key(dev, BTN_RIGHT, f->right);
+	input_report_key(dev, BTN_MIDDLE, f->middle);
 
 	input_sync(dev);
 }
 
+static void alps_process_packet_v7(struct psmouse *psmouse)
+{
+	unsigned char *packet = psmouse->packet;
+
+	if (packet[0] == 0x48 && (packet[4] & 0x47) == 0x06)
+		alps_process_trackstick_packet_v7(psmouse);
+	else
+		alps_process_touchpad_packet_v7(psmouse);
+}
+
 static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
 					unsigned char packet[],
 					bool report_buttons)
@@ -1080,6 +1189,14 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 		return PSMOUSE_BAD_DATA;
 	}
 
+	if (priv->proto_version == ALPS_PROTO_V7 &&
+	    !alps_is_valid_package_v7(psmouse)) {
+		psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
+			    psmouse->pktcnt - 1,
+			    psmouse->packet[psmouse->pktcnt - 1]);
+		return PSMOUSE_BAD_DATA;
+	}
+
 	if (psmouse->pktcnt == psmouse->pktsize) {
 		priv->process_packet(psmouse);
 		return PSMOUSE_FULL_PACKET;
@@ -1192,6 +1309,22 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
 	return 0;
 }
 
+static bool alps_check_valid_firmware_id(unsigned char id[])
+{
+	if (id[0] == 0x73)
+		return true;
+
+	if (id[0] == 0x88 &&
+	    (id[1] == 0x07 ||
+	     id[1] == 0x08 ||
+	     (id[1] & 0xf0) == 0xb0 ||
+	     (id[1] & 0xf0) == 0xc0)) {
+		return true;
+	}
+
+	return false;
+}
+
 static int alps_enter_command_mode(struct psmouse *psmouse)
 {
 	unsigned char param[4];
@@ -1201,8 +1334,7 @@ static int alps_enter_command_mode(struct psmouse *psmouse)
 		return -1;
 	}
 
-	if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
-	    param[0] != 0x73) {
+	if (!alps_check_valid_firmware_id(param)) {
 		psmouse_dbg(psmouse,
 			    "unknown response while entering command mode\n");
 		return -1;
@@ -1660,6 +1792,45 @@ error:
 	return -1;
 }
 
+static int alps_get_v3_v7_resolution(struct psmouse *psmouse, int reg_pitch)
+{
+	int reg, x_pitch, y_pitch, x_electrode, y_electrode, x_phys, y_phys;
+	struct alps_data *priv = psmouse->private;
+
+	reg = alps_command_mode_read_reg(psmouse, reg_pitch);
+	if (reg < 0)
+		return reg;
+
+	x_pitch = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */
+	x_pitch = 50 + 2 * x_pitch; /* In 0.1 mm units */
+
+	y_pitch = (char)reg >> 4; /* sign extend upper 4 bits */
+	y_pitch = 36 + 2 * y_pitch; /* In 0.1 mm units */
+
+	reg = alps_command_mode_read_reg(psmouse, reg_pitch + 1);
+	if (reg < 0)
+		return reg;
+
+	x_electrode = (char)(reg << 4) >> 4; /* sign extend lower 4 bits */
+	x_electrode = 17 + x_electrode;
+
+	y_electrode = (char)reg >> 4; /* sign extend upper 4 bits */
+	y_electrode = 13 + y_electrode;
+
+	x_phys = x_pitch * (x_electrode - 1); /* In 0.1 mm units */
+	y_phys = y_pitch * (y_electrode - 1); /* In 0.1 mm units */
+
+	priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */
+	priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */
+
+	psmouse_dbg(psmouse,
+		    "pitch %dx%d num-electrodes %dx%d physical size %dx%d mm res %dx%d\n",
+		    x_pitch, y_pitch, x_electrode, y_electrode,
+		    x_phys / 10, y_phys / 10, priv->x_res, priv->y_res);
+
+	return 0;
+}
+
 static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
@@ -1680,6 +1851,9 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse)
 	    alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00))
 		goto error;
 
+	if (alps_get_v3_v7_resolution(psmouse, 0xc2da))
+		goto error;
+
 	reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6);
 	if (reg_val == -1)
 		goto error;
@@ -1856,6 +2030,35 @@ static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)
 	return 0;
 }
 
+static int alps_hw_init_v7(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	int reg_val, ret = -1;
+
+	if (alps_enter_command_mode(psmouse) ||
+	    alps_command_mode_read_reg(psmouse, 0xc2d9) == -1)
+		goto error;
+
+	if (alps_get_v3_v7_resolution(psmouse, 0xc397))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
+		goto error;
+
+	reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
+	if (reg_val == -1)
+		goto error;
+	if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
+		goto error;
+
+	alps_exit_command_mode(psmouse);
+	return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+
+error:
+	alps_exit_command_mode(psmouse);
+	return ret;
+}
+
 static void alps_set_defaults(struct alps_data *priv)
 {
 	priv->byte0 = 0x8f;
@@ -1914,6 +2117,21 @@ static void alps_set_defaults(struct alps_data *priv)
 		priv->x_max = 2047;
 		priv->y_max = 1535;
 		break;
+	case ALPS_PROTO_V7:
+		priv->hw_init = alps_hw_init_v7;
+		priv->process_packet = alps_process_packet_v7;
+		priv->decode_fields = alps_decode_packet_v7;
+		priv->set_abs_params = alps_set_abs_params_mt;
+		priv->nibble_commands = alps_v3_nibble_commands;
+		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+		priv->x_max = 0xfff;
+		priv->y_max = 0x7ff;
+		priv->byte0 = 0x48;
+		priv->mask0 = 0x48;
+
+		if (priv->fw_ver[1] != 0xba)
+			priv->flags |= ALPS_BUTTONPAD;
+		break;
 	}
 }
 
@@ -1972,6 +2190,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 	    alps_exit_command_mode(psmouse))
 		return -EIO;
 
+	/* Save the Firmware version */
+	memcpy(priv->fw_ver, ec, 3);
+
 	if (alps_match_table(psmouse, priv, e7, ec) == 0) {
 		return 0;
 	} else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 &&
@@ -1982,6 +2203,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 			return -EIO;
 		else
 			return 0;
+	} else if (ec[0] == 0x88 &&
+		   ((ec[1] & 0xf0) == 0xb0 || (ec[1] & 0xf0) == 0xc0)) {
+		priv->proto_version = ALPS_PROTO_V7;
+		alps_set_defaults(priv);
+
+		return 0;
 	} else if (ec[0] == 0x88 && ec[1] == 0x08) {
 		priv->proto_version = ALPS_PROTO_V3;
 		alps_set_defaults(priv);
@@ -1990,6 +2217,7 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 		priv->decode_fields = alps_decode_rushmore;
 		priv->x_bits = 16;
 		priv->y_bits = 12;
+		priv->flags |= ALPS_IS_RUSHMORE;
 
 		/* hack to make addr_command, nibble_command available */
 		psmouse->private = priv;
@@ -2044,17 +2272,21 @@ static void alps_set_abs_params_st(struct alps_data *priv,
 static void alps_set_abs_params_mt(struct alps_data *priv,
 				   struct input_dev *dev1)
 {
-	set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
-	input_mt_init_slots(dev1, 2, 0);
 	input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
 	input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
 
-	set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
+	input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res);
+	input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res);
+
+	input_mt_init_slots(dev1, MAX_TOUCHES, INPUT_MT_POINTER |
+		INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK | INPUT_MT_SEMI_MT);
+
 	set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
 	set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
 
-	input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
-	input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
+	/* V7 is real multi-touch */
+	if (priv->proto_version == ALPS_PROTO_V7)
+		clear_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
 }
 
 int alps_init(struct psmouse *psmouse)
@@ -2100,7 +2332,9 @@ int alps_init(struct psmouse *psmouse)
 	dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
 
 	priv->set_abs_params(priv, dev1);
-	input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
+	/* No pressure on V7 */
+	if (priv->proto_version != ALPS_PROTO_V7)
+		input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
 
 	if (priv->flags & ALPS_WHEEL) {
 		dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
@@ -2117,6 +2351,9 @@ int alps_init(struct psmouse *psmouse)
 		dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
 		dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
 		dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
+	} else if (priv->flags & ALPS_BUTTONPAD) {
+		set_bit(INPUT_PROP_BUTTONPAD, dev1->propbit);
+		clear_bit(BTN_RIGHT, dev1->keybit);
 	} else {
 		dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
 	}
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 03f88b6940c7..66240b47819a 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -12,17 +12,39 @@
 #ifndef _ALPS_H
 #define _ALPS_H
 
+#include <linux/input/mt.h>
+
 #define ALPS_PROTO_V1	1
 #define ALPS_PROTO_V2	2
 #define ALPS_PROTO_V3	3
 #define ALPS_PROTO_V4	4
 #define ALPS_PROTO_V5	5
 #define ALPS_PROTO_V6	6
+#define ALPS_PROTO_V7	7	/* t3btl t4s */
+
+#define MAX_TOUCHES	2
 
 #define DOLPHIN_COUNT_PER_ELECTRODE	64
 #define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
 #define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
 
+/*
+ * enum V7_PACKET_ID - defines the packet type for V7
+ * V7_PACKET_ID_IDLE: There's no finger and no button activity.
+ * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
+ *  or there's button activities.
+ * V7_PACKET_ID_MULTI: There are at least three non-resting fingers.
+ * V7_PACKET_ID_NEW: The finger position in slot is not continues from
+ *  previous packet.
+*/
+enum V7_PACKET_ID {
+	 V7_PACKET_ID_IDLE,
+	 V7_PACKET_ID_TWO,
+	 V7_PACKET_ID_MULTI,
+	 V7_PACKET_ID_NEW,
+	 V7_PACKET_ID_UNKNOWN,
+};
+
 /**
  * struct alps_model_info - touchpad ID table
  * @signature: E7 response string to match.
@@ -46,7 +68,7 @@ struct alps_model_info {
 	unsigned char command_mode_resp;
 	unsigned char proto_version;
 	unsigned char byte0, mask0;
-	unsigned char flags;
+	int flags;
 };
 
 /**
@@ -65,14 +87,19 @@ struct alps_nibble_commands {
 	unsigned char data;
 };
 
+struct alps_bitmap_point {
+	int start_bit;
+	int num_bits;
+};
+
 /**
  * struct alps_fields - decoded version of the report packet
  * @x_map: Bitmap of active X positions for MT.
  * @y_map: Bitmap of active Y positions for MT.
  * @fingers: Number of fingers for MT.
- * @x: X position for ST.
- * @y: Y position for ST.
- * @z: Z position for ST.
+ * @pressure: Pressure.
+ * @st: position for ST.
+ * @mt: position for MT.
  * @first_mp: Packet is the first of a multi-packet report.
  * @is_mp: Packet is part of a multi-packet report.
  * @left: Left touchpad button is active.
@@ -86,9 +113,11 @@ struct alps_fields {
 	unsigned int x_map;
 	unsigned int y_map;
 	unsigned int fingers;
-	unsigned int x;
-	unsigned int y;
-	unsigned int z;
+
+	int pressure;
+	struct input_mt_pos st;
+	struct input_mt_pos mt[MAX_TOUCHES];
+
 	unsigned int first_mp:1;
 	unsigned int is_mp:1;
 
@@ -113,6 +142,7 @@ struct alps_fields {
  *   known format for this model.  The first byte of the report, ANDed with
  *   mask0, should match byte0.
  * @mask0: The mask used to check the first byte of the report.
+ * @fw_ver: cached copy of firmware version (EC report)
  * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
  * @x_max: Largest possible X position value.
  * @y_max: Largest possible Y position value.
@@ -125,11 +155,7 @@ struct alps_fields {
  * @prev_fin: Finger bit from previous packet.
  * @multi_packet: Multi-packet data in progress.
  * @multi_data: Saved multi-packet data.
- * @x1: First X coordinate from last MT report.
- * @x2: Second X coordinate from last MT report.
- * @y1: First Y coordinate from last MT report.
- * @y2: Second Y coordinate from last MT report.
- * @fingers: Number of fingers from last MT report.
+ * @f: Decoded packet data fields.
  * @quirks: Bitmap of ALPS_QUIRK_*.
  * @timer: Timer for flushing out the final report packet in the stream.
  */
@@ -142,23 +168,25 @@ struct alps_data {
 	int addr_command;
 	unsigned char proto_version;
 	unsigned char byte0, mask0;
-	unsigned char flags;
+	unsigned char fw_ver[3];
+	int flags;
 	int x_max;
 	int y_max;
 	int x_bits;
 	int y_bits;
+	unsigned int x_res;
+	unsigned int y_res;
 
 	int (*hw_init)(struct psmouse *psmouse);
 	void (*process_packet)(struct psmouse *psmouse);
-	void (*decode_fields)(struct alps_fields *f, unsigned char *p,
+	int (*decode_fields)(struct alps_fields *f, unsigned char *p,
 			      struct psmouse *psmouse);
 	void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
 
 	int prev_fin;
 	int multi_packet;
 	unsigned char multi_data[6];
-	int x1, x2, y1, y2;
-	int fingers;
+	struct alps_fields f;
 	u8 quirks;
 	struct timer_list timer;
 };
diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index 613261994621..e74e5d6e5f9f 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -170,6 +170,15 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev,
 			serio_interrupt(kbd_dev->hv_serio, scan_code, 0);
 		}
 		spin_unlock_irqrestore(&kbd_dev->lock, flags);
+
+		/*
+		 * Only trigger a wakeup on key down, otherwise
+		 * "echo freeze > /sys/power/state" can't really enter the
+		 * state because the Enter-UP can trigger a wakeup at once.
+		 */
+		if (!(info & IS_BREAK))
+			pm_wakeup_event(&hv_dev->device, 0);
+
 		break;
 
 	default:
@@ -376,6 +385,9 @@ static int hv_kbd_probe(struct hv_device *hv_dev,
 		goto err_close_vmbus;
 
 	serio_register_port(kbd_dev->hv_serio);
+
+	device_init_wakeup(&hv_dev->device, true);
+
 	return 0;
 
 err_close_vmbus:
@@ -390,6 +402,7 @@ static int hv_kbd_remove(struct hv_device *hv_dev)
 {
 	struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev);
 
+	device_init_wakeup(&hv_dev->device, false);
 	serio_unregister_port(kbd_dev->hv_serio);
 	vmbus_close(hv_dev->channel);
 	kfree(kbd_dev);
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
index bed7cbf84cfd..623bb9e0d5a4 100644
--- a/drivers/input/tablet/Kconfig
+++ b/drivers/input/tablet/Kconfig
@@ -73,20 +73,14 @@ config TABLET_USB_KBTAB
 	  To compile this driver as a module, choose M here: the
 	  module will be called kbtab.
 
-config TABLET_USB_WACOM
-	tristate "Wacom Intuos/Graphire tablet support (USB)"
-	depends on USB_ARCH_HAS_HCD
-	select POWER_SUPPLY
-	select USB
-	select NEW_LEDS
-	select LEDS_CLASS
+config TABLET_SERIAL_WACOM4
+	tristate "Wacom protocol 4 serial tablet support"
+	select SERIO
 	help
-	  Say Y here if you want to use the USB version of the Wacom Intuos
-	  or Graphire tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
+	  Say Y here if you want to use Wacom protocol 4 serial tablets.
+	  E.g. serial versions of the Cintiq, Graphire or Penpartner.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called wacom.
+	  module will be called wacom_serial4.
 
 endif
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
index 3f6c25220638..2e130101cf3c 100644
--- a/drivers/input/tablet/Makefile
+++ b/drivers/input/tablet/Makefile
@@ -2,12 +2,10 @@
 # Makefile for the tablet drivers
 #
 
-# Multipart objects.
-wacom-objs	:= wacom_wac.o wacom_sys.o
 
 obj-$(CONFIG_TABLET_USB_ACECAD)	+= acecad.o
 obj-$(CONFIG_TABLET_USB_AIPTEK)	+= aiptek.o
 obj-$(CONFIG_TABLET_USB_GTCO)	+= gtco.o
 obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o
 obj-$(CONFIG_TABLET_USB_KBTAB)	+= kbtab.o
-obj-$(CONFIG_TABLET_USB_WACOM)	+= wacom.o
+obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
deleted file mode 100644
index 9ebf0ed3b3b3..000000000000
--- a/drivers/input/tablet/wacom.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * drivers/input/tablet/wacom.h
- *
- *  USB Wacom tablet support
- *
- *  Copyright (c) 2000-2004 Vojtech Pavlik	<vojtech@ucw.cz>
- *  Copyright (c) 2000 Andreas Bach Aaen	<abach@stofanet.dk>
- *  Copyright (c) 2000 Clifford Wolf		<clifford@clifford.at>
- *  Copyright (c) 2000 Sam Mosel		<sam.mosel@computer.org>
- *  Copyright (c) 2000 James E. Blair		<corvus@gnu.org>
- *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
- *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
- *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2011 Ping Cheng		<pingc@wacom.com>
- *
- *  ChangeLog:
- *      v0.1 (vp)  - Initial release
- *      v0.2 (aba) - Support for all buttons / combinations
- *      v0.3 (vp)  - Support for Intuos added
- *	v0.4 (sm)  - Support for more Intuos models, menustrip
- *			relative mode, proximity.
- *	v0.5 (vp)  - Big cleanup, nifty features removed,
- *			they belong in userspace
- *	v1.8 (vp)  - Submit URB only when operating, moved to CVS,
- *			use input_report_key instead of report_btn and
- *			other cleanups
- *	v1.11 (vp) - Add URB ->dev setting for new kernels
- *	v1.11 (jb) - Add support for the 4D Mouse & Lens
- *	v1.12 (de) - Add support for two more inking pen IDs
- *	v1.14 (vp) - Use new USB device id probing scheme.
- *		     Fix Wacom Graphire mouse wheel
- *	v1.18 (vp) - Fix mouse wheel direction
- *		     Make mouse relative
- *      v1.20 (fl) - Report tool id for Intuos devices
- *                 - Multi tools support
- *                 - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...)
- *                 - Add PL models support
- *		   - Fix Wacom Graphire mouse wheel again
- *	v1.21 (vp) - Removed protocol descriptions
- *		   - Added MISC_SERIAL for tool serial numbers
- *	      (gb) - Identify version on module load.
- *    v1.21.1 (fl) - added Graphire2 support
- *    v1.21.2 (fl) - added Intuos2 support
- *                 - added all the PL ids
- *    v1.21.3 (fl) - added another eraser id from Neil Okamoto
- *                 - added smooth filter for Graphire from Peri Hankey
- *                 - added PenPartner support from Olaf van Es
- *                 - new tool ids from Ole Martin Bjoerndalen
- *	v1.29 (pc) - Add support for more tablets
- *		   - Fix pressure reporting
- *	v1.30 (vp) - Merge 2.4 and 2.5 drivers
- *		   - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
- *		   - Cleanups here and there
- *    v1.30.1 (pi) - Added Graphire3 support
- *	v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
- *	v1.43 (pc) - Added support for Cintiq 21UX
- *		   - Fixed a Graphire bug
- *		   - Merged wacom_intuos3_irq into wacom_intuos_irq
- *	v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
- *		   - Report Device IDs
- *      v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
- *                 - Minor data report fix
- *      v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c,
- *		   - where wacom_sys.c deals with system specific code,
- *		   - and wacom_wac.c deals with Wacom specific code
- *		   - Support Intuos3 4x6
- *      v1.47 (pc) - Added support for Bamboo
- *      v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
- *      v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
- *      v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
- *      v1.51 (pc) - Added support for Intuos4
- *      v1.52 (pc) - Query Wacom data upon system resume
- *                 - add defines for features->type
- *                 - add new devices (0x9F, 0xE2, and 0XE3)
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef WACOM_H
-#define WACOM_H
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/usb/input.h>
-#include <linux/power_supply.h>
-#include <asm/unaligned.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.53"
-#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
-#define DRIVER_DESC "USB Wacom tablet driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-#define USB_VENDOR_ID_WACOM	0x056a
-#define USB_VENDOR_ID_LENOVO	0x17ef
-
-struct wacom {
-	dma_addr_t data_dma;
-	struct usb_device *usbdev;
-	struct usb_interface *intf;
-	struct urb *irq;
-	struct wacom_wac wacom_wac;
-	struct mutex lock;
-	struct work_struct work;
-	bool open;
-	char phys[32];
-	struct wacom_led {
-		u8 select[2]; /* status led selector (0..3) */
-		u8 llv;       /* status led brightness no button (1..127) */
-		u8 hlv;       /* status led brightness button pressed (1..127) */
-		u8 img_lum;   /* OLED matrix display brightness */
-	} led;
-	struct power_supply battery;
-};
-
-static inline void wacom_schedule_work(struct wacom_wac *wacom_wac)
-{
-	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
-	schedule_work(&wacom->work);
-}
-
-extern const struct usb_device_id wacom_ids[];
-
-void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
-void wacom_setup_device_quirks(struct wacom_features *features);
-int wacom_setup_input_capabilities(struct input_dev *input_dev,
-				   struct wacom_wac *wacom_wac);
-#endif
diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c
new file mode 100644
index 000000000000..20ab802461e7
--- /dev/null
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -0,0 +1,620 @@
+/*
+ * Wacom protocol 4 serial tablet driver
+ *
+ * Copyright 2014      Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2011-2012 Julian Squires <julian@cipht.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version of 2 of the License, or (at your
+ * option) any later version. See the file COPYING in the main directory of
+ * this archive for more details.
+ *
+ * Many thanks to Bill Seremetis, without whom PenPartner support
+ * would not have been possible. Thanks to Patrick Mahoney.
+ *
+ * This driver was developed with reference to much code written by others,
+ * particularly:
+ *  - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>;
+ *  - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>;
+ *  - the USB wacom input driver, credited to many people
+ *    (see drivers/input/tablet/wacom.h);
+ *  - new and old versions of linuxwacom / xf86-input-wacom credited to
+ *    Frederic Lepied, France. <Lepied@XFree86.org> and
+ *    Ping Cheng, Wacom. <pingc@wacom.com>;
+ *  - and xf86wacom.c (a presumably ancient version of the linuxwacom code),
+ *    by Frederic Lepied and Raph Levien <raph@gtk.org>.
+ *
+ * To do:
+ *  - support pad buttons; (requires access to a model with pad buttons)
+ *  - support (protocol 4-style) tilt (requires access to a > 1.4 rom model)
+ */
+
+/*
+ * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code,
+ * protocol 4 uses 7 or 9 byte of data in the following format:
+ *
+ *	Byte 1
+ *	bit 7  Sync bit always 1
+ *	bit 6  Pointing device detected
+ *	bit 5  Cursor = 0 / Stylus = 1
+ *	bit 4  Reserved
+ *	bit 3  1 if a button on the pointing device has been pressed
+ *	bit 2  P0 (optional)
+ *	bit 1  X15
+ *	bit 0  X14
+ *
+ *	Byte 2
+ *	bit 7  Always 0
+ *	bits 6-0 = X13 - X7
+ *
+ *	Byte 3
+ *	bit 7  Always 0
+ *	bits 6-0 = X6 - X0
+ *
+ *	Byte 4
+ *	bit 7  Always 0
+ *	bit 6  B3
+ *	bit 5  B2
+ *	bit 4  B1
+ *	bit 3  B0
+ *	bit 2  P1 (optional)
+ *	bit 1  Y15
+ *	bit 0  Y14
+ *
+ *	Byte 5
+ *	bit 7  Always 0
+ *	bits 6-0 = Y13 - Y7
+ *
+ *	Byte 6
+ *	bit 7  Always 0
+ *	bits 6-0 = Y6 - Y0
+ *
+ *	Byte 7
+ *	bit 7 Always 0
+ *	bit 6  Sign of pressure data; or wheel-rel for cursor tool
+ *	bit 5  P7; or REL1 for cursor tool
+ *	bit 4  P6; or REL0 for cursor tool
+ *	bit 3  P5
+ *	bit 2  P4
+ *	bit 1  P3
+ *	bit 0  P2
+ *
+ *	byte 8 and 9 are optional and present only
+ *	in tilt mode.
+ *
+ *	Byte 8
+ *	bit 7 Always 0
+ *	bit 6 Sign of tilt X
+ *	bit 5  Xt6
+ *	bit 4  Xt5
+ *	bit 3  Xt4
+ *	bit 2  Xt3
+ *	bit 1  Xt2
+ *	bit 0  Xt1
+ *
+ *	Byte 9
+ *	bit 7 Always 0
+ *	bit 6 Sign of tilt Y
+ *	bit 5  Yt6
+ *	bit 4  Yt5
+ *	bit 3  Yt4
+ *	bit 2  Yt3
+ *	bit 1  Yt2
+ *	bit 0  Yt1
+ */
+
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver");
+MODULE_LICENSE("GPL");
+
+#define REQUEST_MODEL_AND_ROM_VERSION	"~#"
+#define REQUEST_MAX_COORDINATES		"~C\r"
+#define REQUEST_CONFIGURATION_STRING	"~R\r"
+#define REQUEST_RESET_TO_PROTOCOL_IV	"\r#"
+/*
+ * Note: sending "\r$\r" causes at least the Digitizer II to send
+ * packets in ASCII instead of binary.  "\r#" seems to undo that.
+ */
+
+#define COMMAND_START_SENDING_PACKETS		"ST\r"
+#define COMMAND_STOP_SENDING_PACKETS		"SP\r"
+#define COMMAND_MULTI_MODE_INPUT		"MU1\r"
+#define COMMAND_ORIGIN_IN_UPPER_LEFT		"OC1\r"
+#define COMMAND_ENABLE_ALL_MACRO_BUTTONS	"~M0\r"
+#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS	"~M1\r"
+#define COMMAND_TRANSMIT_AT_MAX_RATE		"IT0\r"
+#define COMMAND_DISABLE_INCREMENTAL_MODE	"IN0\r"
+#define COMMAND_ENABLE_CONTINUOUS_MODE		"SR\r"
+#define COMMAND_ENABLE_PRESSURE_MODE		"PH1\r"
+#define COMMAND_Z_FILTER			"ZF1\r"
+
+/* Note that this is a protocol 4 packet without tilt information. */
+#define PACKET_LENGTH		7
+#define DATA_SIZE		32
+
+/* flags */
+#define F_COVERS_SCREEN		0x01
+#define F_HAS_STYLUS2		0x02
+#define F_HAS_SCROLLWHEEL	0x04
+
+/* device IDs */
+#define STYLUS_DEVICE_ID	0x02
+#define CURSOR_DEVICE_ID	0x06
+#define ERASER_DEVICE_ID	0x0A
+
+enum { STYLUS = 1, ERASER, CURSOR };
+
+static const struct {
+	int device_id;
+	int input_id;
+} tools[] = {
+	{ 0, 0 },
+	{ STYLUS_DEVICE_ID, BTN_TOOL_PEN },
+	{ ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
+	{ CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
+};
+
+struct wacom {
+	struct input_dev *dev;
+	struct completion cmd_done;
+	int result;
+	u8 expect;
+	u8 eraser_mask;
+	unsigned int extra_z_bits;
+	unsigned int flags;
+	unsigned int res_x, res_y;
+	unsigned int max_x, max_y;
+	unsigned int tool;
+	unsigned int idx;
+	u8 data[DATA_SIZE];
+	char phys[32];
+};
+
+enum {
+	MODEL_CINTIQ		= 0x504C, /* PL */
+	MODEL_CINTIQ2		= 0x4454, /* DT */
+	MODEL_DIGITIZER_II	= 0x5544, /* UD */
+	MODEL_GRAPHIRE		= 0x4554, /* ET */
+	MODEL_PENPARTNER	= 0x4354, /* CT */
+};
+
+static void wacom_handle_model_response(struct wacom *wacom)
+{
+	int major_v, minor_v, r = 0;
+	char *p;
+
+	p = strrchr(wacom->data, 'V');
+	if (p)
+		r = sscanf(p + 1, "%u.%u", &major_v, &minor_v);
+	if (r != 2)
+		major_v = minor_v = 0;
+
+	switch (wacom->data[2] << 8 | wacom->data[3]) {
+	case MODEL_CINTIQ:	/* UNTESTED */
+	case MODEL_CINTIQ2:
+		if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) {
+			wacom->dev->name = "Wacom Cintiq";
+			wacom->dev->id.version = MODEL_CINTIQ;
+		} else {
+			wacom->dev->name = "Wacom Cintiq II";
+			wacom->dev->id.version = MODEL_CINTIQ2;
+		}
+		wacom->res_x = 508;
+		wacom->res_y = 508;
+
+		switch (wacom->data[5] << 8 | wacom->data[6]) {
+		case 0x3731: /* PL-710 */
+			wacom->res_x = 2540;
+			wacom->res_y = 2540;
+			/* fall through */
+		case 0x3535: /* PL-550 */
+		case 0x3830: /* PL-800 */
+			wacom->extra_z_bits = 2;
+		}
+
+		wacom->flags = F_COVERS_SCREEN;
+		break;
+
+	case MODEL_PENPARTNER:
+		wacom->dev->name = "Wacom Penpartner";
+		wacom->dev->id.version = MODEL_PENPARTNER;
+		wacom->res_x = 1000;
+		wacom->res_y = 1000;
+		break;
+
+	case MODEL_GRAPHIRE:
+		wacom->dev->name = "Wacom Graphire";
+		wacom->dev->id.version = MODEL_GRAPHIRE;
+		wacom->res_x = 1016;
+		wacom->res_y = 1016;
+		wacom->max_x = 5103;
+		wacom->max_y = 3711;
+		wacom->extra_z_bits = 2;
+		wacom->eraser_mask = 0x08;
+		wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
+		break;
+
+	case MODEL_DIGITIZER_II:
+		wacom->dev->name = "Wacom Digitizer II";
+		wacom->dev->id.version = MODEL_DIGITIZER_II;
+		if (major_v == 1 && minor_v <= 2)
+			wacom->extra_z_bits = 0; /* UNTESTED */
+		break;
+
+	default:
+		dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n",
+			wacom->data);
+		wacom->result = -ENODEV;
+		return;
+	}
+
+	dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n",
+		 wacom->dev->name, major_v, minor_v);
+}
+
+static void wacom_handle_configuration_response(struct wacom *wacom)
+{
+	int r, skip;
+
+	dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data);
+	r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip,
+		   &wacom->res_x, &wacom->res_y);
+	if (r != 5)
+		dev_warn(&wacom->dev->dev, "could not get resolution\n");
+}
+
+static void wacom_handle_coordinates_response(struct wacom *wacom)
+{
+	int r;
+
+	dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data);
+	r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y);
+	if (r != 2)
+		dev_warn(&wacom->dev->dev, "could not get max coordinates\n");
+}
+
+static void wacom_handle_response(struct wacom *wacom)
+{
+	if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) {
+		dev_err(&wacom->dev->dev,
+			"Wacom got an unexpected response: %s\n", wacom->data);
+		wacom->result = -EIO;
+	} else {
+		wacom->result = 0;
+
+		switch (wacom->data[1]) {
+		case '#':
+			wacom_handle_model_response(wacom);
+			break;
+		case 'R':
+			wacom_handle_configuration_response(wacom);
+			break;
+		case 'C':
+			wacom_handle_coordinates_response(wacom);
+			break;
+		}
+	}
+
+	complete(&wacom->cmd_done);
+}
+
+static void wacom_handle_packet(struct wacom *wacom)
+{
+	u8 in_proximity_p, stylus_p, button;
+	unsigned int tool;
+	int x, y, z;
+
+	in_proximity_p = wacom->data[0] & 0x40;
+	stylus_p = wacom->data[0] & 0x20;
+	button = (wacom->data[3] & 0x78) >> 3;
+	x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2];
+	y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5];
+
+	if (in_proximity_p && stylus_p) {
+		z = wacom->data[6] & 0x7f;
+		if (wacom->extra_z_bits >= 1)
+			z = z << 1 | (wacom->data[3] & 0x4) >> 2;
+		if (wacom->extra_z_bits > 1)
+			z = z << 1 | (wacom->data[0] & 0x4) >> 2;
+		z = z ^ (0x40 << wacom->extra_z_bits);
+	} else {
+		z = -1;
+	}
+
+	if (stylus_p)
+		tool = (button & wacom->eraser_mask) ? ERASER : STYLUS;
+	else
+		tool = CURSOR;
+
+	if (tool != wacom->tool && wacom->tool != 0) {
+		input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
+		input_sync(wacom->dev);
+	}
+	wacom->tool = tool;
+
+	input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
+	input_report_abs(wacom->dev, ABS_MISC,
+			 in_proximity_p ? tools[tool].device_id : 0);
+	input_report_abs(wacom->dev, ABS_X, x);
+	input_report_abs(wacom->dev, ABS_Y, y);
+	input_report_abs(wacom->dev, ABS_PRESSURE, z);
+	if (stylus_p) {
+		input_report_key(wacom->dev, BTN_TOUCH, button & 1);
+		input_report_key(wacom->dev, BTN_STYLUS, button & 2);
+		input_report_key(wacom->dev, BTN_STYLUS2, button & 4);
+	} else {
+		input_report_key(wacom->dev, BTN_LEFT, button & 1);
+		input_report_key(wacom->dev, BTN_RIGHT, button & 2);
+		input_report_key(wacom->dev, BTN_MIDDLE, button & 4);
+		/* handle relative wheel for non-stylus device */
+		z = (wacom->data[6] & 0x30) >> 4;
+		if (wacom->data[6] & 0x40)
+			z = -z;
+		input_report_rel(wacom->dev, REL_WHEEL, z);
+	}
+	input_sync(wacom->dev);
+}
+
+static void wacom_clear_data_buf(struct wacom *wacom)
+{
+	memset(wacom->data, 0, DATA_SIZE);
+	wacom->idx = 0;
+}
+
+static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data,
+				   unsigned int flags)
+{
+	struct wacom *wacom = serio_get_drvdata(serio);
+
+	if (data & 0x80)
+		wacom->idx = 0;
+
+	/*
+	 * We're either expecting a carriage return-terminated ASCII
+	 * response string, or a seven-byte packet with the MSB set on
+	 * the first byte.
+	 *
+	 * Note however that some tablets (the PenPartner, for
+	 * example) don't send a carriage return at the end of a
+	 * command.  We handle these by waiting for timeout.
+	 */
+	if (data == '\r' && !(wacom->data[0] & 0x80)) {
+		wacom_handle_response(wacom);
+		wacom_clear_data_buf(wacom);
+		return IRQ_HANDLED;
+	}
+
+	/* Leave place for 0 termination */
+	if (wacom->idx > (DATA_SIZE - 2)) {
+		dev_dbg(&wacom->dev->dev,
+			"throwing away %d bytes of garbage\n", wacom->idx);
+		wacom_clear_data_buf(wacom);
+	}
+	wacom->data[wacom->idx++] = data;
+
+	if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) {
+		wacom_handle_packet(wacom);
+		wacom_clear_data_buf(wacom);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void wacom_disconnect(struct serio *serio)
+{
+	struct wacom *wacom = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(wacom->dev);
+	kfree(wacom);
+}
+
+static int wacom_send(struct serio *serio, const u8 *command)
+{
+	int err = 0;
+
+	for (; !err && *command; command++)
+		err = serio_write(serio, *command);
+
+	return err;
+}
+
+static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio)
+{
+	const u8 *cmd;
+
+	switch (wacom->dev->id.version) {
+	case MODEL_CINTIQ:	/* UNTESTED */
+		cmd = COMMAND_ORIGIN_IN_UPPER_LEFT
+			COMMAND_TRANSMIT_AT_MAX_RATE
+			COMMAND_ENABLE_CONTINUOUS_MODE
+			COMMAND_START_SENDING_PACKETS;
+		break;
+
+	case MODEL_PENPARTNER:
+		cmd = COMMAND_ENABLE_PRESSURE_MODE
+			COMMAND_START_SENDING_PACKETS;
+		break;
+
+	default:
+		cmd = COMMAND_MULTI_MODE_INPUT
+			COMMAND_ORIGIN_IN_UPPER_LEFT
+			COMMAND_ENABLE_ALL_MACRO_BUTTONS
+			COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
+			COMMAND_TRANSMIT_AT_MAX_RATE
+			COMMAND_DISABLE_INCREMENTAL_MODE
+			COMMAND_ENABLE_CONTINUOUS_MODE
+			COMMAND_Z_FILTER
+			COMMAND_START_SENDING_PACKETS;
+		break;
+	}
+
+	return wacom_send(serio, cmd);
+}
+
+static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio,
+			       const u8 *cmd, const char *desc)
+{
+	int err;
+	unsigned long u;
+
+	wacom->expect = cmd[1];
+	init_completion(&wacom->cmd_done);
+
+	err = wacom_send(serio, cmd);
+	if (err)
+		return err;
+
+	u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
+	if (u == 0) {
+		/* Timeout, process what we've received. */
+		wacom_handle_response(wacom);
+	}
+
+	wacom->expect = 0;
+	return wacom->result;
+}
+
+static int wacom_setup(struct wacom *wacom, struct serio *serio)
+{
+	int err;
+
+	/* Note that setting the link speed is the job of inputattach.
+	 * We assume that reset negotiation has already happened,
+	 * here. */
+	err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION,
+				  "model and version");
+	if (err)
+		return err;
+
+	if (!(wacom->res_x && wacom->res_y)) {
+		err = wacom_send_and_wait(wacom, serio,
+					  REQUEST_CONFIGURATION_STRING,
+					  "configuration string");
+		if (err)
+			return err;
+	}
+
+	if (!(wacom->max_x && wacom->max_y)) {
+		err = wacom_send_and_wait(wacom, serio,
+					  REQUEST_MAX_COORDINATES,
+					  "coordinates string");
+		if (err)
+			return err;
+	}
+
+	return wacom_send_setup_string(wacom, serio);
+}
+
+static int wacom_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct wacom *wacom;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+
+	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!wacom || !input_dev)
+		goto free_device;
+
+	wacom->dev = input_dev;
+	wacom->extra_z_bits = 1;
+	wacom->eraser_mask = 0x04;
+	wacom->tool = wacom->idx = 0;
+	snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys);
+	input_dev->phys = wacom->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor  = SERIO_WACOM_IV;
+	input_dev->id.product = serio->id.extra;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] =
+		BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL);
+	set_bit(ABS_MISC, input_dev->absbit);
+	set_bit(BTN_TOOL_PEN, input_dev->keybit);
+	set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+	set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
+	set_bit(BTN_TOUCH, input_dev->keybit);
+	set_bit(BTN_STYLUS, input_dev->keybit);
+	set_bit(BTN_LEFT, input_dev->keybit);
+	set_bit(BTN_RIGHT, input_dev->keybit);
+	set_bit(BTN_MIDDLE, input_dev->keybit);
+
+	serio_set_drvdata(serio, wacom);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto free_device;
+
+	err = wacom_setup(wacom, serio);
+	if (err)
+		goto close_serio;
+
+	set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+	if (!(wacom->flags & F_COVERS_SCREEN))
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	if (wacom->flags & F_HAS_STYLUS2)
+		__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+	if (wacom->flags & F_HAS_SCROLLWHEEL)
+		__set_bit(REL_WHEEL, input_dev->relbit);
+
+	input_abs_set_res(wacom->dev, ABS_X, wacom->res_x);
+	input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y);
+	input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0);
+	input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0);
+	input_set_abs_params(wacom->dev, ABS_PRESSURE, -1,
+			     (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0);
+
+	err = input_register_device(wacom->dev);
+	if (err)
+		goto close_serio;
+
+	return 0;
+
+close_serio:
+	serio_close(serio);
+free_device:
+	serio_set_drvdata(serio, NULL);
+	input_free_device(input_dev);
+	kfree(wacom);
+	return err;
+}
+
+static struct serio_device_id wacom_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_WACOM_IV,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
+
+static struct serio_driver wacom_drv = {
+	.driver		= {
+		.name	= "wacom_serial4",
+	},
+	.description	= "Wacom protocol 4 serial tablet driver",
+	.id_table	= wacom_serio_ids,
+	.interrupt	= wacom_interrupt,
+	.connect	= wacom_connect,
+	.disconnect	= wacom_disconnect,
+};
+
+module_serio_driver(wacom_drv);
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
deleted file mode 100644
index 2c613cd41dd6..000000000000
--- a/drivers/input/tablet/wacom_sys.c
+++ /dev/null
@@ -1,1497 +0,0 @@
-/*
- * drivers/input/tablet/wacom_sys.c
- *
- *  USB Wacom tablet support - system specific code
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include "wacom_wac.h"
-#include "wacom.h"
-
-/* defines to get HID report descriptor */
-#define HID_DEVICET_HID		(USB_TYPE_CLASS | 0x01)
-#define HID_DEVICET_REPORT	(USB_TYPE_CLASS | 0x02)
-#define HID_USAGE_UNDEFINED		0x00
-#define HID_USAGE_PAGE			0x05
-#define HID_USAGE_PAGE_DIGITIZER	0x0d
-#define HID_USAGE_PAGE_DESKTOP		0x01
-#define HID_USAGE			0x09
-#define HID_USAGE_X			((HID_USAGE_PAGE_DESKTOP << 16) | 0x30)
-#define HID_USAGE_Y			((HID_USAGE_PAGE_DESKTOP << 16) | 0x31)
-#define HID_USAGE_PRESSURE		((HID_USAGE_PAGE_DIGITIZER << 16) | 0x30)
-#define HID_USAGE_X_TILT		((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3d)
-#define HID_USAGE_Y_TILT		((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3e)
-#define HID_USAGE_FINGER		((HID_USAGE_PAGE_DIGITIZER << 16) | 0x22)
-#define HID_USAGE_STYLUS		((HID_USAGE_PAGE_DIGITIZER << 16) | 0x20)
-#define HID_USAGE_CONTACTMAX		((HID_USAGE_PAGE_DIGITIZER << 16) | 0x55)
-#define HID_COLLECTION			0xa1
-#define HID_COLLECTION_LOGICAL		0x02
-#define HID_COLLECTION_END		0xc0
-
-struct hid_descriptor {
-	struct usb_descriptor_header header;
-	__le16   bcdHID;
-	u8       bCountryCode;
-	u8       bNumDescriptors;
-	u8       bDescriptorType;
-	__le16   wDescriptorLength;
-} __attribute__ ((packed));
-
-/* defines to get/set USB message */
-#define USB_REQ_GET_REPORT	0x01
-#define USB_REQ_SET_REPORT	0x09
-
-#define WAC_HID_FEATURE_REPORT	0x03
-#define WAC_MSG_RETRIES		5
-
-#define WAC_CMD_LED_CONTROL	0x20
-#define WAC_CMD_ICON_START	0x21
-#define WAC_CMD_ICON_XFER	0x23
-#define WAC_CMD_RETRIES		10
-
-static int wacom_get_report(struct usb_interface *intf, u8 type, u8 id,
-			    void *buf, size_t size, unsigned int retries)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	int retval;
-
-	do {
-		retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-				USB_REQ_GET_REPORT,
-				USB_DIR_IN | USB_TYPE_CLASS |
-				USB_RECIP_INTERFACE,
-				(type << 8) + id,
-				intf->altsetting[0].desc.bInterfaceNumber,
-				buf, size, 100);
-	} while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries);
-
-	return retval;
-}
-
-static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id,
-			    void *buf, size_t size, unsigned int retries)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	int retval;
-
-	do {
-		retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				USB_REQ_SET_REPORT,
-				USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-				(type << 8) + id,
-				intf->altsetting[0].desc.bInterfaceNumber,
-				buf, size, 1000);
-	} while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries);
-
-	return retval;
-}
-
-static void wacom_sys_irq(struct urb *urb)
-{
-	struct wacom *wacom = urb->context;
-	struct device *dev = &wacom->intf->dev;
-	int retval;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
-			__func__, urb->status);
-		return;
-	default:
-		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
-			__func__, urb->status);
-		goto exit;
-	}
-
-	wacom_wac_irq(&wacom->wacom_wac, urb->actual_length);
-
- exit:
-	usb_mark_last_busy(wacom->usbdev);
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
-		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
-			__func__, retval);
-}
-
-static int wacom_open(struct input_dev *dev)
-{
-	struct wacom *wacom = input_get_drvdata(dev);
-	int retval = 0;
-
-	if (usb_autopm_get_interface(wacom->intf) < 0)
-		return -EIO;
-
-	mutex_lock(&wacom->lock);
-
-	if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
-		retval = -EIO;
-		goto out;
-	}
-
-	wacom->open = true;
-	wacom->intf->needs_remote_wakeup = 1;
-
-out:
-	mutex_unlock(&wacom->lock);
-	usb_autopm_put_interface(wacom->intf);
-	return retval;
-}
-
-static void wacom_close(struct input_dev *dev)
-{
-	struct wacom *wacom = input_get_drvdata(dev);
-	int autopm_error;
-
-	autopm_error = usb_autopm_get_interface(wacom->intf);
-
-	mutex_lock(&wacom->lock);
-	usb_kill_urb(wacom->irq);
-	wacom->open = false;
-	wacom->intf->needs_remote_wakeup = 0;
-	mutex_unlock(&wacom->lock);
-
-	if (!autopm_error)
-		usb_autopm_put_interface(wacom->intf);
-}
-
-/*
- * Calculate the resolution of the X or Y axis, given appropriate HID data.
- * This function is little more than hidinput_calc_abs_res stripped down.
- */
-static int wacom_calc_hid_res(int logical_extents, int physical_extents,
-                              unsigned char unit, unsigned char exponent)
-{
-	int prev, unit_exponent;
-
-	/* Check if the extents are sane */
-	if (logical_extents <= 0 || physical_extents <= 0)
-		return 0;
-
-	/* Get signed value of nybble-sized twos-compliment exponent */
-	unit_exponent = exponent;
-	if (unit_exponent > 7)
-		unit_exponent -= 16;
-
-	/* Convert physical_extents to millimeters */
-	if (unit == 0x11) {		/* If centimeters */
-		unit_exponent += 1;
-	} else if (unit == 0x13) {	/* If inches */
-		prev = physical_extents;
-		physical_extents *= 254;
-		if (physical_extents < prev)
-			return 0;
-		unit_exponent -= 1;
-	} else {
-		return 0;
-	}
-
-	/* Apply negative unit exponent */
-	for (; unit_exponent < 0; unit_exponent++) {
-		prev = logical_extents;
-		logical_extents *= 10;
-		if (logical_extents < prev)
-			return 0;
-	}
-	/* Apply positive unit exponent */
-	for (; unit_exponent > 0; unit_exponent--) {
-		prev = physical_extents;
-		physical_extents *= 10;
-		if (physical_extents < prev)
-			return 0;
-	}
-
-	/* Calculate resolution */
-	return logical_extents / physical_extents;
-}
-
-static int wacom_parse_logical_collection(unsigned char *report,
-					  struct wacom_features *features)
-{
-	int length = 0;
-
-	if (features->type == BAMBOO_PT) {
-
-		/* Logical collection is only used by 3rd gen Bamboo Touch */
-		features->pktlen = WACOM_PKGLEN_BBTOUCH3;
-		features->device_type = BTN_TOOL_FINGER;
-
-		features->x_max = features->y_max =
-			get_unaligned_le16(&report[10]);
-
-		length = 11;
-	}
-	return length;
-}
-
-static void wacom_retrieve_report_data(struct usb_interface *intf,
-				       struct wacom_features *features)
-{
-	int result = 0;
-	unsigned char *rep_data;
-
-	rep_data = kmalloc(2, GFP_KERNEL);
-	if (rep_data) {
-
-		rep_data[0] = 12;
-		result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
-					  rep_data[0], rep_data, 2,
-					  WAC_MSG_RETRIES);
-
-		if (result >= 0 && rep_data[1] > 2)
-			features->touch_max = rep_data[1];
-
-		kfree(rep_data);
-	}
-}
-
-/*
- * Interface Descriptor of wacom devices can be incomplete and
- * inconsistent so wacom_features table is used to store stylus
- * device's packet lengths, various maximum values, and tablet
- * resolution based on product ID's.
- *
- * For devices that contain 2 interfaces, wacom_features table is
- * inaccurate for the touch interface.  Since the Interface Descriptor
- * for touch interfaces has pretty complete data, this function exists
- * to query tablet for this missing information instead of hard coding in
- * an additional table.
- *
- * A typical Interface Descriptor for a stylus will contain a
- * boot mouse application collection that is not of interest and this
- * function will ignore it.
- *
- * It also contains a digitizer application collection that also is not
- * of interest since any information it contains would be duplicate
- * of what is in wacom_features. Usually it defines a report of an array
- * of bytes that could be used as max length of the stylus packet returned.
- * If it happens to define a Digitizer-Stylus Physical Collection then
- * the X and Y logical values contain valid data but it is ignored.
- *
- * A typical Interface Descriptor for a touch interface will contain a
- * Digitizer-Finger Physical Collection which will define both logical
- * X/Y maximum as well as the physical size of tablet. Since touch
- * interfaces haven't supported pressure or distance, this is enough
- * information to override invalid values in the wacom_features table.
- *
- * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
- * Collection. Instead they define a Logical Collection with a single
- * Logical Maximum for both X and Y.
- *
- * Intuos5 touch interface does not contain useful data. We deal with
- * this after returning from this function.
- */
-static int wacom_parse_hid(struct usb_interface *intf,
-			   struct hid_descriptor *hid_desc,
-			   struct wacom_features *features)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	char limit = 0;
-	/* result has to be defined as int for some devices */
-	int result = 0, touch_max = 0;
-	int i = 0, page = 0, finger = 0, pen = 0;
-	unsigned char *report;
-
-	report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
-	if (!report)
-		return -ENOMEM;
-
-	/* retrive report descriptors */
-	do {
-		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			USB_REQ_GET_DESCRIPTOR,
-			USB_RECIP_INTERFACE | USB_DIR_IN,
-			HID_DEVICET_REPORT << 8,
-			intf->altsetting[0].desc.bInterfaceNumber, /* interface */
-			report,
-			hid_desc->wDescriptorLength,
-			5000); /* 5 secs */
-	} while (result < 0 && limit++ < WAC_MSG_RETRIES);
-
-	/* No need to parse the Descriptor. It isn't an error though */
-	if (result < 0)
-		goto out;
-
-	for (i = 0; i < hid_desc->wDescriptorLength; i++) {
-
-		switch (report[i]) {
-		case HID_USAGE_PAGE:
-			page = report[i + 1];
-			i++;
-			break;
-
-		case HID_USAGE:
-			switch (page << 16 | report[i + 1]) {
-			case HID_USAGE_X:
-				if (finger) {
-					features->device_type = BTN_TOOL_FINGER;
-					/* touch device at least supports one touch point */
-					touch_max = 1;
-					switch (features->type) {
-					case TABLETPC2FG:
-						features->pktlen = WACOM_PKGLEN_TPC2FG;
-						break;
-
-					case MTSCREEN:
-					case WACOM_24HDT:
-						features->pktlen = WACOM_PKGLEN_MTOUCH;
-						break;
-
-					case MTTPC:
-					case MTTPC_B:
-						features->pktlen = WACOM_PKGLEN_MTTPC;
-						break;
-
-					case BAMBOO_PT:
-						features->pktlen = WACOM_PKGLEN_BBTOUCH;
-						break;
-
-					default:
-						features->pktlen = WACOM_PKGLEN_GRAPHIRE;
-						break;
-					}
-
-					switch (features->type) {
-					case BAMBOO_PT:
-						features->x_phy =
-							get_unaligned_le16(&report[i + 5]);
-						features->x_max =
-							get_unaligned_le16(&report[i + 8]);
-						i += 15;
-						break;
-
-					case WACOM_24HDT:
-						features->x_max =
-							get_unaligned_le16(&report[i + 3]);
-						features->x_phy =
-							get_unaligned_le16(&report[i + 8]);
-						features->unit = report[i - 1];
-						features->unitExpo = report[i - 3];
-						i += 12;
-						break;
-
-					case MTTPC_B:
-						features->x_max =
-							get_unaligned_le16(&report[i + 3]);
-						features->x_phy =
-							get_unaligned_le16(&report[i + 6]);
-						features->unit = report[i - 5];
-						features->unitExpo = report[i - 3];
-						i += 9;
-						break;
-
-					default:
-						features->x_max =
-							get_unaligned_le16(&report[i + 3]);
-						features->x_phy =
-							get_unaligned_le16(&report[i + 6]);
-						features->unit = report[i + 9];
-						features->unitExpo = report[i + 11];
-						i += 12;
-						break;
-					}
-				} else if (pen) {
-					/* penabled only accepts exact bytes of data */
-					if (features->type >= TABLETPC)
-						features->pktlen = WACOM_PKGLEN_GRAPHIRE;
-					features->device_type = BTN_TOOL_PEN;
-					features->x_max =
-						get_unaligned_le16(&report[i + 3]);
-					i += 4;
-				}
-				break;
-
-			case HID_USAGE_Y:
-				if (finger) {
-					switch (features->type) {
-					case TABLETPC2FG:
-					case MTSCREEN:
-					case MTTPC:
-						features->y_max =
-							get_unaligned_le16(&report[i + 3]);
-						features->y_phy =
-							get_unaligned_le16(&report[i + 6]);
-						i += 7;
-						break;
-
-					case WACOM_24HDT:
-						features->y_max =
-							get_unaligned_le16(&report[i + 3]);
-						features->y_phy =
-							get_unaligned_le16(&report[i - 2]);
-						i += 7;
-						break;
-
-					case BAMBOO_PT:
-						features->y_phy =
-							get_unaligned_le16(&report[i + 3]);
-						features->y_max =
-							get_unaligned_le16(&report[i + 6]);
-						i += 12;
-						break;
-
-					case MTTPC_B:
-						features->y_max =
-							get_unaligned_le16(&report[i + 3]);
-						features->y_phy =
-							get_unaligned_le16(&report[i + 6]);
-						i += 9;
-						break;
-
-					default:
-						features->y_max =
-							features->x_max;
-						features->y_phy =
-							get_unaligned_le16(&report[i + 3]);
-						i += 4;
-						break;
-					}
-				} else if (pen) {
-					features->y_max =
-						get_unaligned_le16(&report[i + 3]);
-					i += 4;
-				}
-				break;
-
-			case HID_USAGE_FINGER:
-				finger = 1;
-				i++;
-				break;
-
-			/*
-			 * Requiring Stylus Usage will ignore boot mouse
-			 * X/Y values and some cases of invalid Digitizer X/Y
-			 * values commonly reported.
-			 */
-			case HID_USAGE_STYLUS:
-				pen = 1;
-				i++;
-				break;
-
-			case HID_USAGE_CONTACTMAX:
-				/* leave touch_max as is if predefined */
-				if (!features->touch_max)
-					wacom_retrieve_report_data(intf, features);
-				i++;
-				break;
-
-			case HID_USAGE_PRESSURE:
-				if (pen) {
-					features->pressure_max =
-						get_unaligned_le16(&report[i + 3]);
-					i += 4;
-				}
-				break;
-			}
-			break;
-
-		case HID_COLLECTION_END:
-			/* reset UsagePage and Finger */
-			finger = page = 0;
-			break;
-
-		case HID_COLLECTION:
-			i++;
-			switch (report[i]) {
-			case HID_COLLECTION_LOGICAL:
-				i += wacom_parse_logical_collection(&report[i],
-								    features);
-				break;
-			}
-			break;
-		}
-	}
-
- out:
-	if (!features->touch_max && touch_max)
-		features->touch_max = touch_max;
-	result = 0;
-	kfree(report);
-	return result;
-}
-
-static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int length, int mode)
-{
-	unsigned char *rep_data;
-	int error = -ENOMEM, limit = 0;
-
-	rep_data = kzalloc(length, GFP_KERNEL);
-	if (!rep_data)
-		return error;
-
-	do {
-		rep_data[0] = report_id;
-		rep_data[1] = mode;
-
-		error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
-		                         report_id, rep_data, length, 1);
-	} while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES);
-
-	kfree(rep_data);
-
-	return error < 0 ? error : 0;
-}
-
-/*
- * Switch the tablet into its most-capable mode. Wacom tablets are
- * typically configured to power-up in a mode which sends mouse-like
- * reports to the OS. To get absolute position, pressure data, etc.
- * from the tablet, it is necessary to switch the tablet out of this
- * mode and into one which sends the full range of tablet data.
- */
-static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features)
-{
-	if (features->device_type == BTN_TOOL_FINGER) {
-		if (features->type > TABLETPC) {
-			/* MT Tablet PC touch */
-			return wacom_set_device_mode(intf, 3, 4, 4);
-		}
-		else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) {
-			return wacom_set_device_mode(intf, 18, 3, 2);
-		}
-	} else if (features->device_type == BTN_TOOL_PEN) {
-		if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
-			return wacom_set_device_mode(intf, 2, 2, 2);
-		}
-	}
-
-	return 0;
-}
-
-static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
-					 struct wacom_features *features)
-{
-	int error = 0;
-	struct usb_host_interface *interface = intf->cur_altsetting;
-	struct hid_descriptor *hid_desc;
-
-	/* default features */
-	features->device_type = BTN_TOOL_PEN;
-	features->x_fuzz = 4;
-	features->y_fuzz = 4;
-	features->pressure_fuzz = 0;
-	features->distance_fuzz = 0;
-
-	/*
-	 * The wireless device HID is basic and layout conflicts with
-	 * other tablets (monitor and touch interface can look like pen).
-	 * Skip the query for this type and modify defaults based on
-	 * interface number.
-	 */
-	if (features->type == WIRELESS) {
-		if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
-			features->device_type = 0;
-		} else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) {
-			features->device_type = BTN_TOOL_FINGER;
-			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
-		}
-	}
-
-	/* only devices that support touch need to retrieve the info */
-	if (features->type < BAMBOO_PT) {
-		goto out;
-	}
-
-	error = usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc);
-	if (error) {
-		error = usb_get_extra_descriptor(&interface->endpoint[0],
-						 HID_DEVICET_REPORT, &hid_desc);
-		if (error) {
-			dev_err(&intf->dev,
-				"can not retrieve extra class descriptor\n");
-			goto out;
-		}
-	}
-	error = wacom_parse_hid(intf, hid_desc, features);
-
- out:
-	return error;
-}
-
-struct wacom_usbdev_data {
-	struct list_head list;
-	struct kref kref;
-	struct usb_device *dev;
-	struct wacom_shared shared;
-};
-
-static LIST_HEAD(wacom_udev_list);
-static DEFINE_MUTEX(wacom_udev_list_lock);
-
-static struct usb_device *wacom_get_sibling(struct usb_device *dev, int vendor, int product)
-{
-	int port1;
-	struct usb_device *sibling;
-
-	if (vendor == 0 && product == 0)
-		return dev;
-
-	if (dev->parent == NULL)
-		return NULL;
-
-	usb_hub_for_each_child(dev->parent, port1, sibling) {
-		struct usb_device_descriptor *d;
-		if (sibling == NULL)
-			continue;
-
-		d = &sibling->descriptor;
-		if (d->idVendor == vendor && d->idProduct == product)
-			return sibling;
-	}
-
-	return NULL;
-}
-
-static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev)
-{
-	struct wacom_usbdev_data *data;
-
-	list_for_each_entry(data, &wacom_udev_list, list) {
-		if (data->dev == dev) {
-			kref_get(&data->kref);
-			return data;
-		}
-	}
-
-	return NULL;
-}
-
-static int wacom_add_shared_data(struct wacom_wac *wacom,
-				 struct usb_device *dev)
-{
-	struct wacom_usbdev_data *data;
-	int retval = 0;
-
-	mutex_lock(&wacom_udev_list_lock);
-
-	data = wacom_get_usbdev_data(dev);
-	if (!data) {
-		data = kzalloc(sizeof(struct wacom_usbdev_data), GFP_KERNEL);
-		if (!data) {
-			retval = -ENOMEM;
-			goto out;
-		}
-
-		kref_init(&data->kref);
-		data->dev = dev;
-		list_add_tail(&data->list, &wacom_udev_list);
-	}
-
-	wacom->shared = &data->shared;
-
-out:
-	mutex_unlock(&wacom_udev_list_lock);
-	return retval;
-}
-
-static void wacom_release_shared_data(struct kref *kref)
-{
-	struct wacom_usbdev_data *data =
-		container_of(kref, struct wacom_usbdev_data, kref);
-
-	mutex_lock(&wacom_udev_list_lock);
-	list_del(&data->list);
-	mutex_unlock(&wacom_udev_list_lock);
-
-	kfree(data);
-}
-
-static void wacom_remove_shared_data(struct wacom_wac *wacom)
-{
-	struct wacom_usbdev_data *data;
-
-	if (wacom->shared) {
-		data = container_of(wacom->shared, struct wacom_usbdev_data, shared);
-		kref_put(&data->kref, wacom_release_shared_data);
-		wacom->shared = NULL;
-	}
-}
-
-static int wacom_led_control(struct wacom *wacom)
-{
-	unsigned char *buf;
-	int retval;
-
-	buf = kzalloc(9, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	if (wacom->wacom_wac.features.type >= INTUOS5S &&
-	    wacom->wacom_wac.features.type <= INTUOSPL) {
-		/*
-		 * Touch Ring and crop mark LED luminance may take on
-		 * one of four values:
-		 *    0 = Low; 1 = Medium; 2 = High; 3 = Off
-		 */
-		int ring_led = wacom->led.select[0] & 0x03;
-		int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03;
-		int crop_lum = 0;
-
-		buf[0] = WAC_CMD_LED_CONTROL;
-		buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led);
-	}
-	else {
-		int led = wacom->led.select[0] | 0x4;
-
-		if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
-		    wacom->wacom_wac.features.type == WACOM_24HD)
-			led |= (wacom->led.select[1] << 4) | 0x40;
-
-		buf[0] = WAC_CMD_LED_CONTROL;
-		buf[1] = led;
-		buf[2] = wacom->led.llv;
-		buf[3] = wacom->led.hlv;
-		buf[4] = wacom->led.img_lum;
-	}
-
-	retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL,
-				  buf, 9, WAC_CMD_RETRIES);
-	kfree(buf);
-
-	return retval;
-}
-
-static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img)
-{
-	unsigned char *buf;
-	int i, retval;
-
-	buf = kzalloc(259, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	/* Send 'start' command */
-	buf[0] = WAC_CMD_ICON_START;
-	buf[1] = 1;
-	retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START,
-				  buf, 2, WAC_CMD_RETRIES);
-	if (retval < 0)
-		goto out;
-
-	buf[0] = WAC_CMD_ICON_XFER;
-	buf[1] = button_id & 0x07;
-	for (i = 0; i < 4; i++) {
-		buf[2] = i;
-		memcpy(buf + 3, img + i * 256, 256);
-
-		retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_XFER,
-					  buf, 259, WAC_CMD_RETRIES);
-		if (retval < 0)
-			break;
-	}
-
-	/* Send 'stop' */
-	buf[0] = WAC_CMD_ICON_START;
-	buf[1] = 0;
-	wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START,
-			 buf, 2, WAC_CMD_RETRIES);
-
-out:
-	kfree(buf);
-	return retval;
-}
-
-static ssize_t wacom_led_select_store(struct device *dev, int set_id,
-				      const char *buf, size_t count)
-{
-	struct wacom *wacom = dev_get_drvdata(dev);
-	unsigned int id;
-	int err;
-
-	err = kstrtouint(buf, 10, &id);
-	if (err)
-		return err;
-
-	mutex_lock(&wacom->lock);
-
-	wacom->led.select[set_id] = id & 0x3;
-	err = wacom_led_control(wacom);
-
-	mutex_unlock(&wacom->lock);
-
-	return err < 0 ? err : count;
-}
-
-#define DEVICE_LED_SELECT_ATTR(SET_ID)					\
-static ssize_t wacom_led##SET_ID##_select_store(struct device *dev,	\
-	struct device_attribute *attr, const char *buf, size_t count)	\
-{									\
-	return wacom_led_select_store(dev, SET_ID, buf, count);		\
-}									\
-static ssize_t wacom_led##SET_ID##_select_show(struct device *dev,	\
-	struct device_attribute *attr, char *buf)			\
-{									\
-	struct wacom *wacom = dev_get_drvdata(dev);			\
-	return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]);	\
-}									\
-static DEVICE_ATTR(status_led##SET_ID##_select, S_IWUSR | S_IRUSR,	\
-		    wacom_led##SET_ID##_select_show,			\
-		    wacom_led##SET_ID##_select_store)
-
-DEVICE_LED_SELECT_ATTR(0);
-DEVICE_LED_SELECT_ATTR(1);
-
-static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest,
-				     const char *buf, size_t count)
-{
-	unsigned int value;
-	int err;
-
-	err = kstrtouint(buf, 10, &value);
-	if (err)
-		return err;
-
-	mutex_lock(&wacom->lock);
-
-	*dest = value & 0x7f;
-	err = wacom_led_control(wacom);
-
-	mutex_unlock(&wacom->lock);
-
-	return err < 0 ? err : count;
-}
-
-#define DEVICE_LUMINANCE_ATTR(name, field)				\
-static ssize_t wacom_##name##_luminance_store(struct device *dev,	\
-	struct device_attribute *attr, const char *buf, size_t count)	\
-{									\
-	struct wacom *wacom = dev_get_drvdata(dev);			\
-									\
-	return wacom_luminance_store(wacom, &wacom->led.field,		\
-				     buf, count);			\
-}									\
-static DEVICE_ATTR(name##_luminance, S_IWUSR,				\
-		   NULL, wacom_##name##_luminance_store)
-
-DEVICE_LUMINANCE_ATTR(status0, llv);
-DEVICE_LUMINANCE_ATTR(status1, hlv);
-DEVICE_LUMINANCE_ATTR(buttons, img_lum);
-
-static ssize_t wacom_button_image_store(struct device *dev, int button_id,
-					const char *buf, size_t count)
-{
-	struct wacom *wacom = dev_get_drvdata(dev);
-	int err;
-
-	if (count != 1024)
-		return -EINVAL;
-
-	mutex_lock(&wacom->lock);
-
-	err = wacom_led_putimage(wacom, button_id, buf);
-
-	mutex_unlock(&wacom->lock);
-
-	return err < 0 ? err : count;
-}
-
-#define DEVICE_BTNIMG_ATTR(BUTTON_ID)					\
-static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev,	\
-	struct device_attribute *attr, const char *buf, size_t count)	\
-{									\
-	return wacom_button_image_store(dev, BUTTON_ID, buf, count);	\
-}									\
-static DEVICE_ATTR(button##BUTTON_ID##_rawimg, S_IWUSR,			\
-		   NULL, wacom_btnimg##BUTTON_ID##_store)
-
-DEVICE_BTNIMG_ATTR(0);
-DEVICE_BTNIMG_ATTR(1);
-DEVICE_BTNIMG_ATTR(2);
-DEVICE_BTNIMG_ATTR(3);
-DEVICE_BTNIMG_ATTR(4);
-DEVICE_BTNIMG_ATTR(5);
-DEVICE_BTNIMG_ATTR(6);
-DEVICE_BTNIMG_ATTR(7);
-
-static struct attribute *cintiq_led_attrs[] = {
-	&dev_attr_status_led0_select.attr,
-	&dev_attr_status_led1_select.attr,
-	NULL
-};
-
-static struct attribute_group cintiq_led_attr_group = {
-	.name = "wacom_led",
-	.attrs = cintiq_led_attrs,
-};
-
-static struct attribute *intuos4_led_attrs[] = {
-	&dev_attr_status0_luminance.attr,
-	&dev_attr_status1_luminance.attr,
-	&dev_attr_status_led0_select.attr,
-	&dev_attr_buttons_luminance.attr,
-	&dev_attr_button0_rawimg.attr,
-	&dev_attr_button1_rawimg.attr,
-	&dev_attr_button2_rawimg.attr,
-	&dev_attr_button3_rawimg.attr,
-	&dev_attr_button4_rawimg.attr,
-	&dev_attr_button5_rawimg.attr,
-	&dev_attr_button6_rawimg.attr,
-	&dev_attr_button7_rawimg.attr,
-	NULL
-};
-
-static struct attribute_group intuos4_led_attr_group = {
-	.name = "wacom_led",
-	.attrs = intuos4_led_attrs,
-};
-
-static struct attribute *intuos5_led_attrs[] = {
-	&dev_attr_status0_luminance.attr,
-	&dev_attr_status_led0_select.attr,
-	NULL
-};
-
-static struct attribute_group intuos5_led_attr_group = {
-	.name = "wacom_led",
-	.attrs = intuos5_led_attrs,
-};
-
-static int wacom_initialize_leds(struct wacom *wacom)
-{
-	int error;
-
-	/* Initialize default values */
-	switch (wacom->wacom_wac.features.type) {
-	case INTUOS4S:
-	case INTUOS4:
-	case INTUOS4L:
-		wacom->led.select[0] = 0;
-		wacom->led.select[1] = 0;
-		wacom->led.llv = 10;
-		wacom->led.hlv = 20;
-		wacom->led.img_lum = 10;
-		error = sysfs_create_group(&wacom->intf->dev.kobj,
-					   &intuos4_led_attr_group);
-		break;
-
-	case WACOM_24HD:
-	case WACOM_21UX2:
-		wacom->led.select[0] = 0;
-		wacom->led.select[1] = 0;
-		wacom->led.llv = 0;
-		wacom->led.hlv = 0;
-		wacom->led.img_lum = 0;
-
-		error = sysfs_create_group(&wacom->intf->dev.kobj,
-					   &cintiq_led_attr_group);
-		break;
-
-	case INTUOS5S:
-	case INTUOS5:
-	case INTUOS5L:
-	case INTUOSPS:
-	case INTUOSPM:
-	case INTUOSPL:
-		if (wacom->wacom_wac.features.device_type == BTN_TOOL_PEN) {
-			wacom->led.select[0] = 0;
-			wacom->led.select[1] = 0;
-			wacom->led.llv = 32;
-			wacom->led.hlv = 0;
-			wacom->led.img_lum = 0;
-
-			error = sysfs_create_group(&wacom->intf->dev.kobj,
-						  &intuos5_led_attr_group);
-		} else
-			return 0;
-		break;
-
-	default:
-		return 0;
-	}
-
-	if (error) {
-		dev_err(&wacom->intf->dev,
-			"cannot create sysfs group err: %d\n", error);
-		return error;
-	}
-	wacom_led_control(wacom);
-
-	return 0;
-}
-
-static void wacom_destroy_leds(struct wacom *wacom)
-{
-	switch (wacom->wacom_wac.features.type) {
-	case INTUOS4S:
-	case INTUOS4:
-	case INTUOS4L:
-		sysfs_remove_group(&wacom->intf->dev.kobj,
-				   &intuos4_led_attr_group);
-		break;
-
-	case WACOM_24HD:
-	case WACOM_21UX2:
-		sysfs_remove_group(&wacom->intf->dev.kobj,
-				   &cintiq_led_attr_group);
-		break;
-
-	case INTUOS5S:
-	case INTUOS5:
-	case INTUOS5L:
-	case INTUOSPS:
-	case INTUOSPM:
-	case INTUOSPL:
-		if (wacom->wacom_wac.features.device_type == BTN_TOOL_PEN)
-			sysfs_remove_group(&wacom->intf->dev.kobj,
-					   &intuos5_led_attr_group);
-		break;
-	}
-}
-
-static enum power_supply_property wacom_battery_props[] = {
-	POWER_SUPPLY_PROP_SCOPE,
-	POWER_SUPPLY_PROP_CAPACITY
-};
-
-static int wacom_battery_get_property(struct power_supply *psy,
-				      enum power_supply_property psp,
-				      union power_supply_propval *val)
-{
-	struct wacom *wacom = container_of(psy, struct wacom, battery);
-	int ret = 0;
-
-	switch (psp) {
-		case POWER_SUPPLY_PROP_SCOPE:
-			val->intval = POWER_SUPPLY_SCOPE_DEVICE;
-			break;
-		case POWER_SUPPLY_PROP_CAPACITY:
-			val->intval =
-				wacom->wacom_wac.battery_capacity * 100 / 31;
-			break;
-		default:
-			ret = -EINVAL;
-			break;
-	}
-
-	return ret;
-}
-
-static int wacom_initialize_battery(struct wacom *wacom)
-{
-	int error = 0;
-
-	if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) {
-		wacom->battery.properties = wacom_battery_props;
-		wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
-		wacom->battery.get_property = wacom_battery_get_property;
-		wacom->battery.name = "wacom_battery";
-		wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY;
-		wacom->battery.use_for_apm = 0;
-
-		error = power_supply_register(&wacom->usbdev->dev,
-					      &wacom->battery);
-
-		if (!error)
-			power_supply_powers(&wacom->battery,
-					    &wacom->usbdev->dev);
-	}
-
-	return error;
-}
-
-static void wacom_destroy_battery(struct wacom *wacom)
-{
-	if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR &&
-	    wacom->battery.dev) {
-		power_supply_unregister(&wacom->battery);
-		wacom->battery.dev = NULL;
-	}
-}
-
-static int wacom_register_input(struct wacom *wacom)
-{
-	struct input_dev *input_dev;
-	struct usb_interface *intf = wacom->intf;
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
-	int error;
-
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		error = -ENOMEM;
-		goto fail1;
-	}
-
-	input_dev->name = wacom_wac->name;
-	input_dev->dev.parent = &intf->dev;
-	input_dev->open = wacom_open;
-	input_dev->close = wacom_close;
-	usb_to_input_id(dev, &input_dev->id);
-	input_set_drvdata(input_dev, wacom);
-
-	wacom_wac->input = input_dev;
-	error = wacom_setup_input_capabilities(input_dev, wacom_wac);
-	if (error)
-		goto fail1;
-
-	error = input_register_device(input_dev);
-	if (error)
-		goto fail2;
-
-	return 0;
-
-fail2:
-	input_free_device(input_dev);
-	wacom_wac->input = NULL;
-fail1:
-	return error;
-}
-
-static void wacom_wireless_work(struct work_struct *work)
-{
-	struct wacom *wacom = container_of(work, struct wacom, work);
-	struct usb_device *usbdev = wacom->usbdev;
-	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
-	struct wacom *wacom1, *wacom2;
-	struct wacom_wac *wacom_wac1, *wacom_wac2;
-	int error;
-
-	/*
-	 * Regardless if this is a disconnect or a new tablet,
-	 * remove any existing input and battery devices.
-	 */
-
-	wacom_destroy_battery(wacom);
-
-	/* Stylus interface */
-	wacom1 = usb_get_intfdata(usbdev->config->interface[1]);
-	wacom_wac1 = &(wacom1->wacom_wac);
-	if (wacom_wac1->input)
-		input_unregister_device(wacom_wac1->input);
-	wacom_wac1->input = NULL;
-
-	/* Touch interface */
-	wacom2 = usb_get_intfdata(usbdev->config->interface[2]);
-	wacom_wac2 = &(wacom2->wacom_wac);
-	if (wacom_wac2->input)
-		input_unregister_device(wacom_wac2->input);
-	wacom_wac2->input = NULL;
-
-	if (wacom_wac->pid == 0) {
-		dev_info(&wacom->intf->dev, "wireless tablet disconnected\n");
-	} else {
-		const struct usb_device_id *id = wacom_ids;
-
-		dev_info(&wacom->intf->dev,
-			 "wireless tablet connected with PID %x\n",
-			 wacom_wac->pid);
-
-		while (id->match_flags) {
-			if (id->idVendor == USB_VENDOR_ID_WACOM &&
-			    id->idProduct == wacom_wac->pid)
-				break;
-			id++;
-		}
-
-		if (!id->match_flags) {
-			dev_info(&wacom->intf->dev,
-				 "ignoring unknown PID.\n");
-			return;
-		}
-
-		/* Stylus interface */
-		wacom_wac1->features =
-			*((struct wacom_features *)id->driver_info);
-		wacom_wac1->features.device_type = BTN_TOOL_PEN;
-		snprintf(wacom_wac1->name, WACOM_NAME_MAX, "%s (WL) Pen",
-			 wacom_wac1->features.name);
-		wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
-		wacom_wac1->shared->type = wacom_wac1->features.type;
-		error = wacom_register_input(wacom1);
-		if (error)
-			goto fail;
-
-		/* Touch interface */
-		if (wacom_wac1->features.touch_max ||
-		    wacom_wac1->features.type == INTUOSHT) {
-			wacom_wac2->features =
-				*((struct wacom_features *)id->driver_info);
-			wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
-			wacom_wac2->features.device_type = BTN_TOOL_FINGER;
-			wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
-			if (wacom_wac2->features.touch_max)
-				snprintf(wacom_wac2->name, WACOM_NAME_MAX,
-					 "%s (WL) Finger",wacom_wac2->features.name);
-			else
-				snprintf(wacom_wac2->name, WACOM_NAME_MAX,
-					 "%s (WL) Pad",wacom_wac2->features.name);
-			error = wacom_register_input(wacom2);
-			if (error)
-				goto fail;
-
-			if (wacom_wac1->features.type == INTUOSHT &&
-			    wacom_wac1->features.touch_max)
-				wacom_wac->shared->touch_input = wacom_wac2->input;
-		}
-
-		error = wacom_initialize_battery(wacom);
-		if (error)
-			goto fail;
-	}
-
-	return;
-
-fail:
-	if (wacom_wac2->input) {
-		input_unregister_device(wacom_wac2->input);
-		wacom_wac2->input = NULL;
-	}
-
-	if (wacom_wac1->input) {
-		input_unregister_device(wacom_wac1->input);
-		wacom_wac1->input = NULL;
-	}
-	return;
-}
-
-/*
- * Not all devices report physical dimensions from HID.
- * Compute the default from hardcoded logical dimension
- * and resolution before driver overwrites them.
- */
-static void wacom_set_default_phy(struct wacom_features *features)
-{
-	if (features->x_resolution) {
-		features->x_phy = (features->x_max * 100) /
-					features->x_resolution;
-		features->y_phy = (features->y_max * 100) /
-					features->y_resolution;
-	}
-}
-
-static void wacom_calculate_res(struct wacom_features *features)
-{
-	features->x_resolution = wacom_calc_hid_res(features->x_max,
-						    features->x_phy,
-						    features->unit,
-						    features->unitExpo);
-	features->y_resolution = wacom_calc_hid_res(features->y_max,
-						    features->y_phy,
-						    features->unit,
-						    features->unitExpo);
-}
-
-static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_endpoint_descriptor *endpoint;
-	struct wacom *wacom;
-	struct wacom_wac *wacom_wac;
-	struct wacom_features *features;
-	int error;
-
-	if (!id->driver_info)
-		return -EINVAL;
-
-	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
-	if (!wacom)
-		return -ENOMEM;
-
-	wacom_wac = &wacom->wacom_wac;
-	wacom_wac->features = *((struct wacom_features *)id->driver_info);
-	features = &wacom_wac->features;
-	if (features->pktlen > WACOM_PKGLEN_MAX) {
-		error = -EINVAL;
-		goto fail1;
-	}
-
-	wacom_wac->data = usb_alloc_coherent(dev, WACOM_PKGLEN_MAX,
-					     GFP_KERNEL, &wacom->data_dma);
-	if (!wacom_wac->data) {
-		error = -ENOMEM;
-		goto fail1;
-	}
-
-	wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!wacom->irq) {
-		error = -ENOMEM;
-		goto fail2;
-	}
-
-	wacom->usbdev = dev;
-	wacom->intf = intf;
-	mutex_init(&wacom->lock);
-	INIT_WORK(&wacom->work, wacom_wireless_work);
-	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
-	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
-
-	endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
-	/* set the default size in case we do not get them from hid */
-	wacom_set_default_phy(features);
-
-	/* Retrieve the physical and logical size for touch devices */
-	error = wacom_retrieve_hid_descriptor(intf, features);
-	if (error)
-		goto fail3;
-
-	/*
-	 * Intuos5 has no useful data about its touch interface in its
-	 * HID descriptor. If this is the touch interface (wMaxPacketSize
-	 * of WACOM_PKGLEN_BBTOUCH3), override the table values.
-	 */
-	if (features->type >= INTUOS5S && features->type <= INTUOSHT) {
-		if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
-			features->device_type = BTN_TOOL_FINGER;
-			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
-
-			features->x_max = 4096;
-			features->y_max = 4096;
-		} else {
-			features->device_type = BTN_TOOL_PEN;
-		}
-	}
-
-	wacom_setup_device_quirks(features);
-
-	/* set unit to "100th of a mm" for devices not reported by HID */
-	if (!features->unit) {
-		features->unit = 0x11;
-		features->unitExpo = 16 - 3;
-	}
-	wacom_calculate_res(features);
-
-	strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
-
-	if (features->quirks & WACOM_QUIRK_MULTI_INPUT) {
-		struct usb_device *other_dev;
-
-		/* Append the device type to the name */
-		if (features->device_type != BTN_TOOL_FINGER)
-			strlcat(wacom_wac->name, " Pen", WACOM_NAME_MAX);
-		else if (features->touch_max)
-			strlcat(wacom_wac->name, " Finger", WACOM_NAME_MAX);
-		else
-			strlcat(wacom_wac->name, " Pad", WACOM_NAME_MAX);
-
-		other_dev = wacom_get_sibling(dev, features->oVid, features->oPid);
-		if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL)
-			other_dev = dev;
-		error = wacom_add_shared_data(wacom_wac, other_dev);
-		if (error)
-			goto fail3;
-	}
-
-	usb_fill_int_urb(wacom->irq, dev,
-			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
-			 wacom_wac->data, features->pktlen,
-			 wacom_sys_irq, wacom, endpoint->bInterval);
-	wacom->irq->transfer_dma = wacom->data_dma;
-	wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	error = wacom_initialize_leds(wacom);
-	if (error)
-		goto fail4;
-
-	if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) {
-		error = wacom_register_input(wacom);
-		if (error)
-			goto fail5;
-	}
-
-	/* Note that if query fails it is not a hard failure */
-	wacom_query_tablet_data(intf, features);
-
-	usb_set_intfdata(intf, wacom);
-
-	if (features->quirks & WACOM_QUIRK_MONITOR) {
-		if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
-			error = -EIO;
-			goto fail5;
-		}
-	}
-
-	if (wacom_wac->features.type == INTUOSHT && wacom_wac->features.touch_max) {
-		if (wacom_wac->features.device_type == BTN_TOOL_FINGER)
-			wacom_wac->shared->touch_input = wacom_wac->input;
-	}
-
-	return 0;
-
- fail5: wacom_destroy_leds(wacom);
- fail4:	wacom_remove_shared_data(wacom_wac);
- fail3:	usb_free_urb(wacom->irq);
- fail2:	usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
- fail1:	kfree(wacom);
-	return error;
-}
-
-static void wacom_disconnect(struct usb_interface *intf)
-{
-	struct wacom *wacom = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-
-	usb_kill_urb(wacom->irq);
-	cancel_work_sync(&wacom->work);
-	if (wacom->wacom_wac.input)
-		input_unregister_device(wacom->wacom_wac.input);
-	wacom_destroy_battery(wacom);
-	wacom_destroy_leds(wacom);
-	usb_free_urb(wacom->irq);
-	usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
-			wacom->wacom_wac.data, wacom->data_dma);
-	wacom_remove_shared_data(&wacom->wacom_wac);
-	kfree(wacom);
-}
-
-static int wacom_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct wacom *wacom = usb_get_intfdata(intf);
-
-	mutex_lock(&wacom->lock);
-	usb_kill_urb(wacom->irq);
-	mutex_unlock(&wacom->lock);
-
-	return 0;
-}
-
-static int wacom_resume(struct usb_interface *intf)
-{
-	struct wacom *wacom = usb_get_intfdata(intf);
-	struct wacom_features *features = &wacom->wacom_wac.features;
-	int rv = 0;
-
-	mutex_lock(&wacom->lock);
-
-	/* switch to wacom mode first */
-	wacom_query_tablet_data(intf, features);
-	wacom_led_control(wacom);
-
-	if ((wacom->open || (features->quirks & WACOM_QUIRK_MONITOR)) &&
-	    usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
-		rv = -EIO;
-
-	mutex_unlock(&wacom->lock);
-
-	return rv;
-}
-
-static int wacom_reset_resume(struct usb_interface *intf)
-{
-	return wacom_resume(intf);
-}
-
-static struct usb_driver wacom_driver = {
-	.name =		"wacom",
-	.id_table =	wacom_ids,
-	.probe =	wacom_probe,
-	.disconnect =	wacom_disconnect,
-	.suspend =	wacom_suspend,
-	.resume =	wacom_resume,
-	.reset_resume =	wacom_reset_resume,
-	.supports_autosuspend = 1,
-};
-
-module_usb_driver(wacom_driver);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
deleted file mode 100644
index e73cf2c71f35..000000000000
--- a/drivers/input/tablet/wacom_wac.c
+++ /dev/null
@@ -1,2485 +0,0 @@
-/*
- * drivers/input/tablet/wacom_wac.c
- *
- *  USB Wacom tablet support - Wacom specific code
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include "wacom_wac.h"
-#include "wacom.h"
-#include <linux/input/mt.h>
-#include <linux/hid.h>
-
-/* resolution for penabled devices */
-#define WACOM_PL_RES		20
-#define WACOM_PENPRTN_RES	40
-#define WACOM_VOLITO_RES	50
-#define WACOM_GRAPHIRE_RES	80
-#define WACOM_INTUOS_RES	100
-#define WACOM_INTUOS3_RES	200
-
-/* Scale factor relating reported contact size to logical contact area.
- * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
- */
-#define WACOM_CONTACT_AREA_SCALE 2607
-
-static int wacom_penpartner_irq(struct wacom_wac *wacom)
-{
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-
-	switch (data[0]) {
-	case 1:
-		if (data[5] & 0x80) {
-			wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-			wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
-			input_report_key(input, wacom->tool[0], 1);
-			input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
-			input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
-			input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
-			input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
-			input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127));
-			input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
-		} else {
-			input_report_key(input, wacom->tool[0], 0);
-			input_report_abs(input, ABS_MISC, 0); /* report tool id */
-			input_report_abs(input, ABS_PRESSURE, -1);
-			input_report_key(input, BTN_TOUCH, 0);
-		}
-		break;
-
-	case 2:
-		input_report_key(input, BTN_TOOL_PEN, 1);
-		input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
-		input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
-		input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
-		input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
-		input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
-		input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
-		break;
-
-	default:
-		dev_dbg(input->dev.parent,
-			"%s: received unknown report #%d\n", __func__, data[0]);
-		return 0;
-        }
-
-	return 1;
-}
-
-static int wacom_pl_irq(struct wacom_wac *wacom)
-{
-	struct wacom_features *features = &wacom->features;
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	int prox, pressure;
-
-	if (data[0] != WACOM_REPORT_PENABLED) {
-		dev_dbg(input->dev.parent,
-			"%s: received unknown report #%d\n", __func__, data[0]);
-		return 0;
-	}
-
-	prox = data[1] & 0x40;
-
-	if (prox) {
-		wacom->id[0] = ERASER_DEVICE_ID;
-		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
-		if (features->pressure_max > 255)
-			pressure = (pressure << 1) | ((data[4] >> 6) & 1);
-		pressure += (features->pressure_max + 1) / 2;
-
-		/*
-		 * if going from out of proximity into proximity select between the eraser
-		 * and the pen based on the state of the stylus2 button, choose eraser if
-		 * pressed else choose pen. if not a proximity change from out to in, send
-		 * an out of proximity for previous tool then a in for new tool.
-		 */
-		if (!wacom->tool[0]) {
-			/* Eraser bit set for DTF */
-			if (data[1] & 0x10)
-				wacom->tool[1] = BTN_TOOL_RUBBER;
-			else
-				/* Going into proximity select tool */
-				wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-		} else {
-			/* was entered with stylus2 pressed */
-			if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
-				/* report out proximity for previous tool */
-				input_report_key(input, wacom->tool[1], 0);
-				input_sync(input);
-				wacom->tool[1] = BTN_TOOL_PEN;
-				return 0;
-			}
-		}
-		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
-			/* Unknown tool selected default to pen tool */
-			wacom->tool[1] = BTN_TOOL_PEN;
-			wacom->id[0] = STYLUS_DEVICE_ID;
-		}
-		input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */
-		input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
-		input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
-		input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
-		input_report_abs(input, ABS_PRESSURE, pressure);
-
-		input_report_key(input, BTN_TOUCH, data[4] & 0x08);
-		input_report_key(input, BTN_STYLUS, data[4] & 0x10);
-		/* Only allow the stylus2 button to be reported for the pen tool. */
-		input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
-	} else {
-		/* report proximity-out of a (valid) tool */
-		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
-			/* Unknown tool selected default to pen tool */
-			wacom->tool[1] = BTN_TOOL_PEN;
-		}
-		input_report_key(input, wacom->tool[1], prox);
-	}
-
-	wacom->tool[0] = prox; /* Save proximity state */
-	return 1;
-}
-
-static int wacom_ptu_irq(struct wacom_wac *wacom)
-{
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-
-	if (data[0] != WACOM_REPORT_PENABLED) {
-		dev_dbg(input->dev.parent,
-			"%s: received unknown report #%d\n", __func__, data[0]);
-		return 0;
-	}
-
-	if (data[1] & 0x04) {
-		input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20);
-		input_report_key(input, BTN_TOUCH, data[1] & 0x08);
-		wacom->id[0] = ERASER_DEVICE_ID;
-	} else {
-		input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20);
-		input_report_key(input, BTN_TOUCH, data[1] & 0x01);
-		wacom->id[0] = STYLUS_DEVICE_ID;
-	}
-	input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
-	input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
-	input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
-	input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
-	input_report_key(input, BTN_STYLUS, data[1] & 0x02);
-	input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
-	return 1;
-}
-
-static int wacom_dtu_irq(struct wacom_wac *wacom)
-{
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	int prox = data[1] & 0x20;
-
-	dev_dbg(input->dev.parent,
-		"%s: received report #%d", __func__, data[0]);
-
-	if (prox) {
-		/* Going into proximity select tool */
-		wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-		if (wacom->tool[0] == BTN_TOOL_PEN)
-			wacom->id[0] = STYLUS_DEVICE_ID;
-		else
-			wacom->id[0] = ERASER_DEVICE_ID;
-	}
-	input_report_key(input, BTN_STYLUS, data[1] & 0x02);
-	input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
-	input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
-	input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
-	input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]);
-	input_report_key(input, BTN_TOUCH, data[1] & 0x05);
-	if (!prox) /* out-prox */
-		wacom->id[0] = 0;
-	input_report_key(input, wacom->tool[0], prox);
-	input_report_abs(input, ABS_MISC, wacom->id[0]);
-	return 1;
-}
-
-static int wacom_dtus_irq(struct wacom_wac *wacom)
-{
-	char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	unsigned short prox, pressure = 0;
-
-	if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) {
-		dev_dbg(input->dev.parent,
-			"%s: received unknown report #%d", __func__, data[0]);
-		return 0;
-	} else if (data[0] == WACOM_REPORT_DTUSPAD) {
-		input_report_key(input, BTN_0, (data[1] & 0x01));
-		input_report_key(input, BTN_1, (data[1] & 0x02));
-		input_report_key(input, BTN_2, (data[1] & 0x04));
-		input_report_key(input, BTN_3, (data[1] & 0x08));
-		input_report_abs(input, ABS_MISC,
-				 data[1] & 0x0f ? PAD_DEVICE_ID : 0);
-		/*
-		 * Serial number is required when expresskeys are
-		 * reported through pen interface.
-		 */
-		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
-		return 1;
-	} else {
-		prox = data[1] & 0x80;
-		if (prox) {
-			switch ((data[1] >> 3) & 3) {
-			case 1: /* Rubber */
-				wacom->tool[0] = BTN_TOOL_RUBBER;
-				wacom->id[0] = ERASER_DEVICE_ID;
-				break;
-
-			case 2: /* Pen */
-				wacom->tool[0] = BTN_TOOL_PEN;
-				wacom->id[0] = STYLUS_DEVICE_ID;
-				break;
-			}
-		}
-
-		input_report_key(input, BTN_STYLUS, data[1] & 0x20);
-		input_report_key(input, BTN_STYLUS2, data[1] & 0x40);
-		input_report_abs(input, ABS_X, get_unaligned_be16(&data[3]));
-		input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5]));
-		pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff);
-		input_report_abs(input, ABS_PRESSURE, pressure);
-		input_report_key(input, BTN_TOUCH, pressure > 10);
-
-		if (!prox) /* out-prox */
-			wacom->id[0] = 0;
-		input_report_key(input, wacom->tool[0], prox);
-		input_report_abs(input, ABS_MISC, wacom->id[0]);
-		input_event(input, EV_MSC, MSC_SERIAL, 1);
-		return 1;
-	}
-}
-
-static int wacom_graphire_irq(struct wacom_wac *wacom)
-{
-	struct wacom_features *features = &wacom->features;
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	int prox;
-	int rw = 0;
-	int retval = 0;
-
-	if (data[0] != WACOM_REPORT_PENABLED) {
-		dev_dbg(input->dev.parent,
-			"%s: received unknown report #%d\n", __func__, data[0]);
-		goto exit;
-	}
-
-	prox = data[1] & 0x80;
-	if (prox || wacom->id[0]) {
-		if (prox) {
-			switch ((data[1] >> 5) & 3) {
-
-			case 0:	/* Pen */
-				wacom->tool[0] = BTN_TOOL_PEN;
-				wacom->id[0] = STYLUS_DEVICE_ID;
-				break;
-
-			case 1: /* Rubber */
-				wacom->tool[0] = BTN_TOOL_RUBBER;
-				wacom->id[0] = ERASER_DEVICE_ID;
-				break;
-
-			case 2: /* Mouse with wheel */
-				input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
-				/* fall through */
-
-			case 3: /* Mouse without wheel */
-				wacom->tool[0] = BTN_TOOL_MOUSE;
-				wacom->id[0] = CURSOR_DEVICE_ID;
-				break;
-			}
-		}
-		input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
-		input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
-		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
-			input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8));
-			input_report_key(input, BTN_TOUCH, data[1] & 0x01);
-			input_report_key(input, BTN_STYLUS, data[1] & 0x02);
-			input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
-		} else {
-			input_report_key(input, BTN_LEFT, data[1] & 0x01);
-			input_report_key(input, BTN_RIGHT, data[1] & 0x02);
-			if (features->type == WACOM_G4 ||
-					features->type == WACOM_MO) {
-				input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
-				rw = (data[7] & 0x04) - (data[7] & 0x03);
-			} else {
-				input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
-				rw = -(signed char)data[6];
-			}
-			input_report_rel(input, REL_WHEEL, rw);
-		}
-
-		if (!prox)
-			wacom->id[0] = 0;
-		input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
-		input_report_key(input, wacom->tool[0], prox);
-		input_event(input, EV_MSC, MSC_SERIAL, 1);
-		input_sync(input); /* sync last event */
-	}
-
-	/* send pad data */
-	switch (features->type) {
-	case WACOM_G4:
-		prox = data[7] & 0xf8;
-		if (prox || wacom->id[1]) {
-			wacom->id[1] = PAD_DEVICE_ID;
-			input_report_key(input, BTN_BACK, (data[7] & 0x40));
-			input_report_key(input, BTN_FORWARD, (data[7] & 0x80));
-			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
-			input_report_rel(input, REL_WHEEL, rw);
-			if (!prox)
-				wacom->id[1] = 0;
-			input_report_abs(input, ABS_MISC, wacom->id[1]);
-			input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
-			retval = 1;
-		}
-		break;
-
-	case WACOM_MO:
-		prox = (data[7] & 0xf8) || data[8];
-		if (prox || wacom->id[1]) {
-			wacom->id[1] = PAD_DEVICE_ID;
-			input_report_key(input, BTN_BACK, (data[7] & 0x08));
-			input_report_key(input, BTN_LEFT, (data[7] & 0x20));
-			input_report_key(input, BTN_FORWARD, (data[7] & 0x10));
-			input_report_key(input, BTN_RIGHT, (data[7] & 0x40));
-			input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f));
-			if (!prox)
-				wacom->id[1] = 0;
-			input_report_abs(input, ABS_MISC, wacom->id[1]);
-			input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
-			retval = 1;
-		}
-		break;
-	}
-exit:
-	return retval;
-}
-
-static int wacom_intuos_inout(struct wacom_wac *wacom)
-{
-	struct wacom_features *features = &wacom->features;
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	int idx = 0;
-
-	/* tool number */
-	if (features->type == INTUOS)
-		idx = data[1] & 0x01;
-
-	/* Enter report */
-	if ((data[1] & 0xfc) == 0xc0) {
-		if (features->quirks & WACOM_QUIRK_MULTI_INPUT)
-			wacom->shared->stylus_in_proximity = true;
-
-		/* serial number of the tool */
-		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
-			(data[4] << 20) + (data[5] << 12) +
-			(data[6] << 4) + (data[7] >> 4);
-
-		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
-			((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12);
-
-		switch (wacom->id[idx]) {
-		case 0x812: /* Inking pen */
-		case 0x801: /* Intuos3 Inking pen */
-		case 0x120802: /* Intuos4/5 Inking Pen */
-		case 0x012:
-			wacom->tool[idx] = BTN_TOOL_PENCIL;
-			break;
-
-		case 0x822: /* Pen */
-		case 0x842:
-		case 0x852:
-		case 0x823: /* Intuos3 Grip Pen */
-		case 0x813: /* Intuos3 Classic Pen */
-		case 0x885: /* Intuos3 Marker Pen */
-		case 0x802: /* Intuos4/5 13HD/24HD General Pen */
-		case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */
-		case 0x022:
-		case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */
-		case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */
-		case 0x160802: /* Cintiq 13HD Pro Pen */
-		case 0x180802: /* DTH2242 Pen */
-		case 0x100802: /* Intuos4/5 13HD/24HD General Pen */
-			wacom->tool[idx] = BTN_TOOL_PEN;
-			break;
-
-		case 0x832: /* Stroke pen */
-		case 0x032:
-			wacom->tool[idx] = BTN_TOOL_BRUSH;
-			break;
-
-		case 0x007: /* Mouse 4D and 2D */
-		case 0x09c:
-		case 0x094:
-		case 0x017: /* Intuos3 2D Mouse */
-		case 0x806: /* Intuos4 Mouse */
-			wacom->tool[idx] = BTN_TOOL_MOUSE;
-			break;
-
-		case 0x096: /* Lens cursor */
-		case 0x097: /* Intuos3 Lens cursor */
-		case 0x006: /* Intuos4 Lens cursor */
-			wacom->tool[idx] = BTN_TOOL_LENS;
-			break;
-
-		case 0x82a: /* Eraser */
-		case 0x85a:
-		case 0x91a:
-		case 0xd1a:
-		case 0x0fa:
-		case 0x82b: /* Intuos3 Grip Pen Eraser */
-		case 0x81b: /* Intuos3 Classic Pen Eraser */
-		case 0x91b: /* Intuos3 Airbrush Eraser */
-		case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */
-		case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */
-		case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
-		case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */
-		case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
-		case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
-		case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */
-		case 0x18080a: /* DTH2242 Eraser */
-		case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */
-			wacom->tool[idx] = BTN_TOOL_RUBBER;
-			break;
-
-		case 0xd12:
-		case 0x912:
-		case 0x112:
-		case 0x913: /* Intuos3 Airbrush */
-		case 0x902: /* Intuos4/5 13HD/24HD Airbrush */
-		case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */
-			wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
-			break;
-
-		default: /* Unknown tool */
-			wacom->tool[idx] = BTN_TOOL_PEN;
-			break;
-		}
-		return 1;
-	}
-
-	/* older I4 styli don't work with new Cintiqs */
-	if (!((wacom->id[idx] >> 20) & 0x01) &&
-			(features->type == WACOM_21UX2))
-		return 1;
-
-	/* Range Report */
-	if ((data[1] & 0xfe) == 0x20) {
-		input_report_key(input, BTN_TOUCH, 0);
-		input_report_abs(input, ABS_PRESSURE, 0);
-		input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max);
-		if (features->quirks & WACOM_QUIRK_MULTI_INPUT)
-			wacom->shared->stylus_in_proximity = true;
-	}
-
-	/* Exit report */
-	if ((data[1] & 0xfe) == 0x80) {
-		if (features->quirks & WACOM_QUIRK_MULTI_INPUT)
-			wacom->shared->stylus_in_proximity = false;
-
-		/*
-		 * Reset all states otherwise we lose the initial states
-		 * when in-prox next time
-		 */
-		input_report_abs(input, ABS_X, 0);
-		input_report_abs(input, ABS_Y, 0);
-		input_report_abs(input, ABS_DISTANCE, 0);
-		input_report_abs(input, ABS_TILT_X, 0);
-		input_report_abs(input, ABS_TILT_Y, 0);
-		if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
-			input_report_key(input, BTN_LEFT, 0);
-			input_report_key(input, BTN_MIDDLE, 0);
-			input_report_key(input, BTN_RIGHT, 0);
-			input_report_key(input, BTN_SIDE, 0);
-			input_report_key(input, BTN_EXTRA, 0);
-			input_report_abs(input, ABS_THROTTLE, 0);
-			input_report_abs(input, ABS_RZ, 0);
-		} else {
-			input_report_abs(input, ABS_PRESSURE, 0);
-			input_report_key(input, BTN_STYLUS, 0);
-			input_report_key(input, BTN_STYLUS2, 0);
-			input_report_key(input, BTN_TOUCH, 0);
-			input_report_abs(input, ABS_WHEEL, 0);
-			if (features->type >= INTUOS3S)
-				input_report_abs(input, ABS_Z, 0);
-		}
-		input_report_key(input, wacom->tool[idx], 0);
-		input_report_abs(input, ABS_MISC, 0); /* reset tool id */
-		input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
-		wacom->id[idx] = 0;
-		return 2;
-	}
-	return 0;
-}
-
-static void wacom_intuos_general(struct wacom_wac *wacom)
-{
-	struct wacom_features *features = &wacom->features;
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	unsigned int t;
-
-	/* general pen packet */
-	if ((data[1] & 0xb8) == 0xa0) {
-		t = (data[6] << 2) | ((data[7] >> 6) & 3);
-		if (features->type >= INTUOS4S && features->type <= CINTIQ_HYBRID) {
-			t = (t << 1) | (data[1] & 1);
-		}
-		input_report_abs(input, ABS_PRESSURE, t);
-		input_report_abs(input, ABS_TILT_X,
-				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
-		input_report_key(input, BTN_STYLUS, data[1] & 2);
-		input_report_key(input, BTN_STYLUS2, data[1] & 4);
-		input_report_key(input, BTN_TOUCH, t > 10);
-	}
-
-	/* airbrush second packet */
-	if ((data[1] & 0xbc) == 0xb4) {
-		input_report_abs(input, ABS_WHEEL,
-				(data[6] << 2) | ((data[7] >> 6) & 3));
-		input_report_abs(input, ABS_TILT_X,
-				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
-	}
-}
-
-static int wacom_intuos_irq(struct wacom_wac *wacom)
-{
-	struct wacom_features *features = &wacom->features;
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	unsigned int t;
-	int idx = 0, result;
-
-	if (data[0] != WACOM_REPORT_PENABLED &&
-	    data[0] != WACOM_REPORT_INTUOSREAD &&
-	    data[0] != WACOM_REPORT_INTUOSWRITE &&
-	    data[0] != WACOM_REPORT_INTUOSPAD &&
-	    data[0] != WACOM_REPORT_INTUOS5PAD) {
-		dev_dbg(input->dev.parent,
-			"%s: received unknown report #%d\n", __func__, data[0]);
-                return 0;
-	}
-
-	/* tool number */
-	if (features->type == INTUOS)
-		idx = data[1] & 0x01;
-
-	/* pad packets. Works as a second tool and is always in prox */
-	if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) {
-		if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
-			input_report_key(input, BTN_0, (data[2] & 0x01));
-			input_report_key(input, BTN_1, (data[3] & 0x01));
-			input_report_key(input, BTN_2, (data[3] & 0x02));
-			input_report_key(input, BTN_3, (data[3] & 0x04));
-			input_report_key(input, BTN_4, (data[3] & 0x08));
-			input_report_key(input, BTN_5, (data[3] & 0x10));
-			input_report_key(input, BTN_6, (data[3] & 0x20));
-			if (data[1] & 0x80) {
-				input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f));
-			} else {
-				/* Out of proximity, clear wheel value. */
-				input_report_abs(input, ABS_WHEEL, 0);
-			}
-			if (features->type != INTUOS4S) {
-				input_report_key(input, BTN_7, (data[3] & 0x40));
-				input_report_key(input, BTN_8, (data[3] & 0x80));
-			}
-			if (data[1] | (data[2] & 0x01) | data[3]) {
-				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-			} else {
-				input_report_abs(input, ABS_MISC, 0);
-			}
-		} else if (features->type == DTK) {
-			input_report_key(input, BTN_0, (data[6] & 0x01));
-			input_report_key(input, BTN_1, (data[6] & 0x02));
-			input_report_key(input, BTN_2, (data[6] & 0x04));
-			input_report_key(input, BTN_3, (data[6] & 0x08));
-			input_report_key(input, BTN_4, (data[6] & 0x10));
-			input_report_key(input, BTN_5, (data[6] & 0x20));
-			if (data[6] & 0x3f) {
-				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-			} else {
-				input_report_abs(input, ABS_MISC, 0);
-			}
-		} else if (features->type == WACOM_13HD) {
-			input_report_key(input, BTN_0, (data[3] & 0x01));
-			input_report_key(input, BTN_1, (data[4] & 0x01));
-			input_report_key(input, BTN_2, (data[4] & 0x02));
-			input_report_key(input, BTN_3, (data[4] & 0x04));
-			input_report_key(input, BTN_4, (data[4] & 0x08));
-			input_report_key(input, BTN_5, (data[4] & 0x10));
-			input_report_key(input, BTN_6, (data[4] & 0x20));
-			input_report_key(input, BTN_7, (data[4] & 0x40));
-			input_report_key(input, BTN_8, (data[4] & 0x80));
-			if ((data[3] & 0x01) | data[4]) {
-				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-			} else {
-				input_report_abs(input, ABS_MISC, 0);
-			}
-		} else if (features->type == WACOM_24HD) {
-			input_report_key(input, BTN_0, (data[6] & 0x01));
-			input_report_key(input, BTN_1, (data[6] & 0x02));
-			input_report_key(input, BTN_2, (data[6] & 0x04));
-			input_report_key(input, BTN_3, (data[6] & 0x08));
-			input_report_key(input, BTN_4, (data[6] & 0x10));
-			input_report_key(input, BTN_5, (data[6] & 0x20));
-			input_report_key(input, BTN_6, (data[6] & 0x40));
-			input_report_key(input, BTN_7, (data[6] & 0x80));
-			input_report_key(input, BTN_8, (data[8] & 0x01));
-			input_report_key(input, BTN_9, (data[8] & 0x02));
-			input_report_key(input, BTN_A, (data[8] & 0x04));
-			input_report_key(input, BTN_B, (data[8] & 0x08));
-			input_report_key(input, BTN_C, (data[8] & 0x10));
-			input_report_key(input, BTN_X, (data[8] & 0x20));
-			input_report_key(input, BTN_Y, (data[8] & 0x40));
-			input_report_key(input, BTN_Z, (data[8] & 0x80));
-
-			/*
-			 * Three "buttons" are available on the 24HD which are
-			 * physically implemented as a touchstrip. Each button
-			 * is approximately 3 bits wide with a 2 bit spacing.
-			 * The raw touchstrip bits are stored at:
-			 *    ((data[3] & 0x1f) << 8) | data[4])
-			 */
-			input_report_key(input, KEY_PROG1, data[4] & 0x07);
-			input_report_key(input, KEY_PROG2, data[4] & 0xE0);
-			input_report_key(input, KEY_PROG3, data[3] & 0x1C);
-
-			if (data[1] & 0x80) {
-				input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f));
-			} else {
-				/* Out of proximity, clear wheel value. */
-				input_report_abs(input, ABS_WHEEL, 0);
-			}
-
-			if (data[2] & 0x80) {
-				input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f));
-			} else {
-				/* Out of proximity, clear second wheel value. */
-				input_report_abs(input, ABS_THROTTLE, 0);
-			}
-
-			if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) {
-				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-			} else {
-				input_report_abs(input, ABS_MISC, 0);
-			}
-		} else if (features->type == CINTIQ_HYBRID) {
-			/*
-			 * Do not send hardware buttons under Android. They
-			 * are already sent to the system through GPIO (and
-			 * have different meaning).
-			 */
-			input_report_key(input, BTN_1, (data[4] & 0x01));
-			input_report_key(input, BTN_2, (data[4] & 0x02));
-			input_report_key(input, BTN_3, (data[4] & 0x04));
-			input_report_key(input, BTN_4, (data[4] & 0x08));
-
-			input_report_key(input, BTN_5, (data[4] & 0x10));  /* Right  */
-			input_report_key(input, BTN_6, (data[4] & 0x20));  /* Up     */
-			input_report_key(input, BTN_7, (data[4] & 0x40));  /* Left   */
-			input_report_key(input, BTN_8, (data[4] & 0x80));  /* Down   */
-			input_report_key(input, BTN_0, (data[3] & 0x01));  /* Center */
-		} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
-			int i;
-
-			/* Touch ring mode switch has no capacitive sensor */
-			input_report_key(input, BTN_0, (data[3] & 0x01));
-
-			/*
-			 * ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in
-			 * addition to the mechanical switch. Switch data is
-			 * stored in data[4], capacitive data in data[5].
-			 */
-			for (i = 0; i < 8; i++)
-				input_report_key(input, BTN_1 + i, data[4] & (1 << i));
-
-			if (data[2] & 0x80) {
-				input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f));
-			} else {
-				/* Out of proximity, clear wheel value. */
-				input_report_abs(input, ABS_WHEEL, 0);
-			}
-
-			if (data[2] | (data[3] & 0x01) | data[4] | data[5]) {
-				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-			} else {
-				input_report_abs(input, ABS_MISC, 0);
-			}
-		} else {
-			if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) {
-				input_report_key(input, BTN_0, (data[5] & 0x01));
-				input_report_key(input, BTN_1, (data[6] & 0x01));
-				input_report_key(input, BTN_2, (data[6] & 0x02));
-				input_report_key(input, BTN_3, (data[6] & 0x04));
-				input_report_key(input, BTN_4, (data[6] & 0x08));
-				input_report_key(input, BTN_5, (data[6] & 0x10));
-				input_report_key(input, BTN_6, (data[6] & 0x20));
-				input_report_key(input, BTN_7, (data[6] & 0x40));
-				input_report_key(input, BTN_8, (data[6] & 0x80));
-				input_report_key(input, BTN_9, (data[7] & 0x01));
-				input_report_key(input, BTN_A, (data[8] & 0x01));
-				input_report_key(input, BTN_B, (data[8] & 0x02));
-				input_report_key(input, BTN_C, (data[8] & 0x04));
-				input_report_key(input, BTN_X, (data[8] & 0x08));
-				input_report_key(input, BTN_Y, (data[8] & 0x10));
-				input_report_key(input, BTN_Z, (data[8] & 0x20));
-				input_report_key(input, BTN_BASE, (data[8] & 0x40));
-				input_report_key(input, BTN_BASE2, (data[8] & 0x80));
-
-				if (features->type == WACOM_22HD) {
-					input_report_key(input, KEY_PROG1, data[9] & 0x01);
-					input_report_key(input, KEY_PROG2, data[9] & 0x02);
-					input_report_key(input, KEY_PROG3, data[9] & 0x04);
-				}
-			} else {
-				input_report_key(input, BTN_0, (data[5] & 0x01));
-				input_report_key(input, BTN_1, (data[5] & 0x02));
-				input_report_key(input, BTN_2, (data[5] & 0x04));
-				input_report_key(input, BTN_3, (data[5] & 0x08));
-				input_report_key(input, BTN_4, (data[6] & 0x01));
-				input_report_key(input, BTN_5, (data[6] & 0x02));
-				input_report_key(input, BTN_6, (data[6] & 0x04));
-				input_report_key(input, BTN_7, (data[6] & 0x08));
-				input_report_key(input, BTN_8, (data[5] & 0x10));
-				input_report_key(input, BTN_9, (data[6] & 0x10));
-			}
-			input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
-			input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
-
-			if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) |
-				data[2] | (data[3] & 0x1f) | data[4] | data[8] |
-				(data[7] & 0x01)) {
-				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
-			} else {
-				input_report_abs(input, ABS_MISC, 0);
-			}
-		}
-		input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
-                return 1;
-	}
-
-	/* process in/out prox events */
-	result = wacom_intuos_inout(wacom);
-	if (result)
-                return result - 1;
-
-	/* don't proceed if we don't know the ID */
-	if (!wacom->id[idx])
-		return 0;
-
-	/* Only large Intuos support Lense Cursor */
-	if (wacom->tool[idx] == BTN_TOOL_LENS &&
-	    (features->type == INTUOS3 ||
-	     features->type == INTUOS3S ||
-	     features->type == INTUOS4 ||
-	     features->type == INTUOS4S ||
-	     features->type == INTUOS5 ||
-	     features->type == INTUOS5S ||
-	     features->type == INTUOSPM ||
-	     features->type == INTUOSPS)) {
-
-		return 0;
-	}
-
-	/* Cintiq doesn't send data when RDY bit isn't set */
-	if (features->type == CINTIQ && !(data[1] & 0x40))
-                 return 0;
-
-	if (features->type >= INTUOS3S) {
-		input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
-		input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
-		input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
-	} else {
-		input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2]));
-		input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4]));
-		input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
-	}
-
-	/* process general packets */
-	wacom_intuos_general(wacom);
-
-	/* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */
-	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) {
-
-		if (data[1] & 0x02) {
-			/* Rotation packet */
-			if (features->type >= INTUOS3S) {
-				/* I3 marker pen rotation */
-				t = (data[6] << 3) | ((data[7] >> 5) & 7);
-				t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
-					((t-1) / 2 + 450)) : (450 - t / 2) ;
-				input_report_abs(input, ABS_Z, t);
-			} else {
-				/* 4D mouse rotation packet */
-				t = (data[6] << 3) | ((data[7] >> 5) & 7);
-				input_report_abs(input, ABS_RZ, (data[7] & 0x20) ?
-					((t - 1) / 2) : -t / 2);
-			}
-
-		} else if (!(data[1] & 0x10) && features->type < INTUOS3S) {
-			/* 4D mouse packet */
-			input_report_key(input, BTN_LEFT,   data[8] & 0x01);
-			input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
-			input_report_key(input, BTN_RIGHT,  data[8] & 0x04);
-
-			input_report_key(input, BTN_SIDE,   data[8] & 0x20);
-			input_report_key(input, BTN_EXTRA,  data[8] & 0x10);
-			t = (data[6] << 2) | ((data[7] >> 6) & 3);
-			input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
-
-		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
-			/* I4 mouse */
-			if (features->type >= INTUOS4S && features->type <= INTUOSPL) {
-				input_report_key(input, BTN_LEFT,   data[6] & 0x01);
-				input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
-				input_report_key(input, BTN_RIGHT,  data[6] & 0x04);
-				input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7)
-						 - ((data[7] & 0x40) >> 6));
-				input_report_key(input, BTN_SIDE,   data[6] & 0x08);
-				input_report_key(input, BTN_EXTRA,  data[6] & 0x10);
-
-				input_report_abs(input, ABS_TILT_X,
-					((data[7] << 1) & 0x7e) | (data[8] >> 7));
-				input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
-			} else {
-				/* 2D mouse packet */
-				input_report_key(input, BTN_LEFT,   data[8] & 0x04);
-				input_report_key(input, BTN_MIDDLE, data[8] & 0x08);
-				input_report_key(input, BTN_RIGHT,  data[8] & 0x10);
-				input_report_rel(input, REL_WHEEL, (data[8] & 0x01)
-						 - ((data[8] & 0x02) >> 1));
-
-				/* I3 2D mouse side buttons */
-				if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
-					input_report_key(input, BTN_SIDE,   data[8] & 0x40);
-					input_report_key(input, BTN_EXTRA,  data[8] & 0x20);
-				}
-			}
-		} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
-				features->type == INTUOS4L || features->type == INTUOS5L ||
-				features->type == INTUOSPL) &&
-			   wacom->tool[idx] == BTN_TOOL_LENS) {
-			/* Lens cursor packets */
-			input_report_key(input, BTN_LEFT,   data[8] & 0x01);
-			input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
-			input_report_key(input, BTN_RIGHT,  data[8] & 0x04);
-			input_report_key(input, BTN_SIDE,   data[8] & 0x10);
-			input_report_key(input, BTN_EXTRA,  data[8] & 0x08);
-		}
-	}
-
-	input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */
-	input_report_key(input, wacom->tool[idx], 1);
-	input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
-	return 1;
-}
-
-static int int_dist(int x1, int y1, int x2, int y2)
-{
-	int x = x2 - x1;
-	int y = y2 - y1;
-
-	return int_sqrt(x*x + y*y);
-}
-
-static int wacom_24hdt_irq(struct wacom_wac *wacom)
-{
-	struct input_dev *input = wacom->input;
-	unsigned char *data = wacom->data;
-	int i;
-	int current_num_contacts = data[61];
-	int contacts_to_send = 0;
-
-	/*
-	 * First packet resets the counter since only the first
-	 * packet in series will have non-zero current_num_contacts.
-	 */
-	if (current_num_contacts)
-		wacom->num_contacts_left = current_num_contacts;
-
-	/* There are at most 4 contacts per packet */
-	contacts_to_send = min(4, wacom->num_contacts_left);
-
-	for (i = 0; i < contacts_to_send; i++) {
-		int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1;
-		bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity;
-		int slot = input_mt_get_slot_by_key(input, data[offset + 1]);
-
-		if (slot < 0)
-			continue;
-		input_mt_slot(input, slot);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
-
-		if (touch) {
-			int t_x = get_unaligned_le16(&data[offset + 2]);
-			int c_x = get_unaligned_le16(&data[offset + 4]);
-			int t_y = get_unaligned_le16(&data[offset + 6]);
-			int c_y = get_unaligned_le16(&data[offset + 8]);
-			int w = get_unaligned_le16(&data[offset + 10]);
-			int h = get_unaligned_le16(&data[offset + 12]);
-
-			input_report_abs(input, ABS_MT_POSITION_X, t_x);
-			input_report_abs(input, ABS_MT_POSITION_Y, t_y);
-			input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h));
-			input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y));
-			input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
-			input_report_abs(input, ABS_MT_ORIENTATION, w > h);
-		}
-	}
-	input_mt_report_pointer_emulation(input, true);
-
-	wacom->num_contacts_left -= contacts_to_send;
-	if (wacom->num_contacts_left <= 0)
-		wacom->num_contacts_left = 0;
-
-	return 1;
-}
-
-static int wacom_mt_touch(struct wacom_wac *wacom)
-{
-	struct input_dev *input = wacom->input;
-	unsigned char *data = wacom->data;
-	int i;
-	int current_num_contacts = data[2];
-	int contacts_to_send = 0;
-	int x_offset = 0;
-
-	/* MTTPC does not support Height and Width */
-	if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B)
-		x_offset = -4;
-
-	/*
-	 * First packet resets the counter since only the first
-	 * packet in series will have non-zero current_num_contacts.
-	 */
-	if (current_num_contacts)
-		wacom->num_contacts_left = current_num_contacts;
-
-	/* There are at most 5 contacts per packet */
-	contacts_to_send = min(5, wacom->num_contacts_left);
-
-	for (i = 0; i < contacts_to_send; i++) {
-		int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
-		bool touch = data[offset] & 0x1;
-		int id = get_unaligned_le16(&data[offset + 1]);
-		int slot = input_mt_get_slot_by_key(input, id);
-
-		if (slot < 0)
-			continue;
-
-		input_mt_slot(input, slot);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
-		if (touch) {
-			int x = get_unaligned_le16(&data[offset + x_offset + 7]);
-			int y = get_unaligned_le16(&data[offset + x_offset + 9]);
-			input_report_abs(input, ABS_MT_POSITION_X, x);
-			input_report_abs(input, ABS_MT_POSITION_Y, y);
-		}
-	}
-	input_mt_report_pointer_emulation(input, true);
-
-	wacom->num_contacts_left -= contacts_to_send;
-	if (wacom->num_contacts_left < 0)
-		wacom->num_contacts_left = 0;
-
-	return 1;
-}
-
-static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
-{
-	struct input_dev *input = wacom->input;
-	unsigned char *data = wacom->data;
-	int contact_with_no_pen_down_count = 0;
-	int i;
-
-	for (i = 0; i < 2; i++) {
-		int p = data[1] & (1 << i);
-		bool touch = p && !wacom->shared->stylus_in_proximity;
-
-		input_mt_slot(input, i);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
-		if (touch) {
-			int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
-			int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
-
-			input_report_abs(input, ABS_MT_POSITION_X, x);
-			input_report_abs(input, ABS_MT_POSITION_Y, y);
-			contact_with_no_pen_down_count++;
-		}
-	}
-	input_mt_report_pointer_emulation(input, true);
-
-	/* keep touch state for pen event */
-	wacom->shared->touch_down = (contact_with_no_pen_down_count > 0);
-
-	return 1;
-}
-
-static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
-{
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	bool prox;
-	int x = 0, y = 0;
-
-	if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG)
-		return 0;
-
-	if (!wacom->shared->stylus_in_proximity) {
-		if (len == WACOM_PKGLEN_TPC1FG) {
-			prox = data[0] & 0x01;
-			x = get_unaligned_le16(&data[1]);
-			y = get_unaligned_le16(&data[3]);
-		} else if (len == WACOM_PKGLEN_TPC1FG_B) {
-			prox = data[2] & 0x01;
-			x = get_unaligned_le16(&data[3]);
-			y = get_unaligned_le16(&data[5]);
-		} else {
-			prox = data[1] & 0x01;
-			x = le16_to_cpup((__le16 *)&data[2]);
-			y = le16_to_cpup((__le16 *)&data[4]);
-		}
-	} else
-		/* force touch out when pen is in prox */
-		prox = 0;
-
-	if (prox) {
-		input_report_abs(input, ABS_X, x);
-		input_report_abs(input, ABS_Y, y);
-	}
-	input_report_key(input, BTN_TOUCH, prox);
-
-	/* keep touch state for pen events */
-	wacom->shared->touch_down = prox;
-
-	return 1;
-}
-
-static int wacom_tpc_pen(struct wacom_wac *wacom)
-{
-	unsigned char *data = wacom->data;
-	struct input_dev *input = wacom->input;
-	bool prox = data[1] & 0x20;
-
-	if (!wacom->shared->stylus_in_proximity) /* first in prox */
-		/* Going into proximity select tool */
-		wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-
-	/* keep pen state for touch events */
-	wacom->shared->stylus_in_proximity = prox;
-
-	/* send pen events only when touch is up or forced out */
-	if (!wacom->shared->touch_down) {
-		input_report_key(input, BTN_STYLUS, data[1] & 0x02);
-		input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
-		input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
-		input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
-		input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x03) << 8) | data[6]);
-		input_report_key(input, BTN_TOUCH, data[1] & 0x05);
-		input_report_key(input, wacom->tool[0], prox);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
-{
-	unsigned char *data = wacom->data;
-
-	dev_dbg(wacom->input->dev.parent,
-		"%s: received report #%d\n", __func__, data[0]);
-
-	switch (len) {
-	case WACOM_PKGLEN_TPC1FG:
-		return wacom_tpc_single_touch(wacom, len);
-
-	case WACOM_PKGLEN_TPC2FG:
-		return wacom_tpc_mt_touch(wacom);
-
-	case WACOM_PKGLEN_PENABLED:
-		return wacom_tpc_pen(wacom);
-
-	default:
-		switch (data[0]) {
-		case WACOM_REPORT_TPC1FG:
-		case WACOM_REPORT_TPCHID:
-		case WACOM_REPORT_TPCST:
-		case WACOM_REPORT_TPC1FGE:
-			return wacom_tpc_single_touch(wacom, len);
-
-		case WACOM_REPORT_TPCMT:
-		case WACOM_REPORT_TPCMT2:
-			return wacom_mt_touch(wacom);
-
-		case WACOM_REPORT_PENABLED:
-			return wacom_tpc_pen(wacom);
-		}
-	}
-
-	return 0;
-}
-
-static int wacom_bpt_touch(struct wacom_wac *wacom)
-{
-	struct wacom_features *features = &wacom->features;
-	struct input_dev *input = wacom->input;
-	unsigned char *data = wacom->data;
-	int i;
-
-	if (data[0] != 0x02)
-	    return 0;
-
-	for (i = 0; i < 2; i++) {
-		int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
-		bool touch = data[offset + 3] & 0x80;
-
-		/*
-		 * Touch events need to be disabled while stylus is
-		 * in proximity because user's hand is resting on touchpad
-		 * and sending unwanted events.  User expects tablet buttons
-		 * to continue working though.
-		 */
-		touch = touch && !wacom->shared->stylus_in_proximity;
-
-		input_mt_slot(input, i);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
-		if (touch) {
-			int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
-			int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
-			if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
-				x <<= 5;
-				y <<= 5;
-			}
-			input_report_abs(input, ABS_MT_POSITION_X, x);
-			input_report_abs(input, ABS_MT_POSITION_Y, y);
-		}
-	}
-
-	input_mt_report_pointer_emulation(input, true);
-
-	input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
-	input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
-	input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
-	input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
-
-	input_sync(input);
-
-	return 0;
-}
-
-static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
-{
-	struct wacom_features *features = &wacom->features;
-	struct input_dev *input = wacom->input;
-	bool touch = data[1] & 0x80;
-	int slot = input_mt_get_slot_by_key(input, data[0]);
-
-	if (slot < 0)
-		return;
-
-	touch = touch && !wacom->shared->stylus_in_proximity;
-
-	input_mt_slot(input, slot);
-	input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
-
-	if (touch) {
-		int x = (data[2] << 4) | (data[4] >> 4);
-		int y = (data[3] << 4) | (data[4] & 0x0f);
-		int width, height;
-
-		if (features->type >= INTUOSPS && features->type <= INTUOSPL) {
-			width  = data[5] * 100;
-			height = data[6] * 100;
-		} else {
-			/*
-			 * "a" is a scaled-down area which we assume is
-			 * roughly circular and which can be described as:
-			 * a=(pi*r^2)/C.
-			 */
-			int a = data[5];
-			int x_res = input_abs_get_res(input, ABS_MT_POSITION_X);
-			int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y);
-			width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
-			height = width * y_res / x_res;
-		}
-
-		input_report_abs(input, ABS_MT_POSITION_X, x);
-		input_report_abs(input, ABS_MT_POSITION_Y, y);
-		input_report_abs(input, ABS_MT_TOUCH_MAJOR, width);
-		input_report_abs(input, ABS_MT_TOUCH_MINOR, height);
-	}
-}
-
-static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
-{
-	struct input_dev *input = wacom->input;
-	struct wacom_features *features = &wacom->features;
-
-	if (features->type == INTUOSHT) {
-		input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
-		input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
-	} else {
-		input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
-		input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
-	}
-	input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
-	input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
-}
-
-static int wacom_bpt3_touch(struct wacom_wac *wacom)
-{
-	struct input_dev *input = wacom->input;
-	unsigned char *data = wacom->data;
-	int count = data[1] & 0x07;
-	int i;
-
-	if (data[0] != 0x02)
-	    return 0;
-
-	/* data has up to 7 fixed sized 8-byte messages starting at data[2] */
-	for (i = 0; i < count; i++) {
-		int offset = (8 * i) + 2;
-		int msg_id = data[offset];
-
-		if (msg_id >= 2 && msg_id <= 17)
-			wacom_bpt3_touch_msg(wacom, data + offset);
-		else if (msg_id == 128)
-			wacom_bpt3_button_msg(wacom, data + offset);
-
-	}
-	input_mt_report_pointer_emulation(input, true);
-
-	input_sync(input);
-
-	return 0;
-}
-
-static int wacom_bpt_pen(struct wacom_wac *wacom)
-{
-	struct wacom_features *features = &wacom->features;
-	struct input_dev *input = wacom->input;
-	unsigned char *data = wacom->data;
-	int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
-
-	if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_USB)
-	    return 0;
-
-	if (data[0] == WACOM_REPORT_USB) {
-		if (features->type == INTUOSHT && features->touch_max) {
-			input_report_switch(wacom->shared->touch_input,
-					    SW_MUTE_DEVICE, data[8] & 0x40);
-			input_sync(wacom->shared->touch_input);
-		}
-		return 0;
-	}
-
-	prox = (data[1] & 0x20) == 0x20;
-
-	/*
-	 * All reports shared between PEN and RUBBER tool must be
-	 * forced to a known starting value (zero) when transitioning to
-	 * out-of-prox.
-	 *
-	 * If not reset then, to userspace, it will look like lost events
-	 * if new tool comes in-prox with same values as previous tool sent.
-	 *
-	 * Hardware does report zero in most out-of-prox cases but not all.
-	 */
-	if (prox) {
-		if (!wacom->shared->stylus_in_proximity) {
-			if (data[1] & 0x08) {
-				wacom->tool[0] = BTN_TOOL_RUBBER;
-				wacom->id[0] = ERASER_DEVICE_ID;
-			} else {
-				wacom->tool[0] = BTN_TOOL_PEN;
-				wacom->id[0] = STYLUS_DEVICE_ID;
-			}
-			wacom->shared->stylus_in_proximity = true;
-		}
-		x = le16_to_cpup((__le16 *)&data[2]);
-		y = le16_to_cpup((__le16 *)&data[4]);
-		p = le16_to_cpup((__le16 *)&data[6]);
-		/*
-		 * Convert distance from out prox to distance from tablet.
-		 * distance will be greater than distance_max once
-		 * touching and applying pressure; do not report negative
-		 * distance.
-		 */
-		if (data[8] <= features->distance_max)
-			d = features->distance_max - data[8];
-
-		pen = data[1] & 0x01;
-		btn1 = data[1] & 0x02;
-		btn2 = data[1] & 0x04;
-	}
-
-	input_report_key(input, BTN_TOUCH, pen);
-	input_report_key(input, BTN_STYLUS, btn1);
-	input_report_key(input, BTN_STYLUS2, btn2);
-
-	input_report_abs(input, ABS_X, x);
-	input_report_abs(input, ABS_Y, y);
-	input_report_abs(input, ABS_PRESSURE, p);
-	input_report_abs(input, ABS_DISTANCE, d);
-
-	if (!prox) {
-		wacom->id[0] = 0;
-		wacom->shared->stylus_in_proximity = false;
-	}
-
-	input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */
-	input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */
-
-	return 1;
-}
-
-static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
-{
-	if (len == WACOM_PKGLEN_BBTOUCH)
-		return wacom_bpt_touch(wacom);
-	else if (len == WACOM_PKGLEN_BBTOUCH3)
-		return wacom_bpt3_touch(wacom);
-	else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN)
-		return wacom_bpt_pen(wacom);
-
-	return 0;
-}
-
-static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
-{
-	unsigned char *data = wacom->data;
-	int connected;
-
-	if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL)
-		return 0;
-
-	connected = data[1] & 0x01;
-	if (connected) {
-		int pid, battery;
-
-		if ((wacom->shared->type == INTUOSHT) &&
-				wacom->shared->touch_max) {
-			input_report_switch(wacom->shared->touch_input,
-					SW_MUTE_DEVICE, data[5] & 0x40);
-			input_sync(wacom->shared->touch_input);
-		}
-
-		pid = get_unaligned_be16(&data[6]);
-		battery = data[5] & 0x3f;
-		if (wacom->pid != pid) {
-			wacom->pid = pid;
-			wacom_schedule_work(wacom);
-		}
-		wacom->battery_capacity = battery;
-	} else if (wacom->pid != 0) {
-		/* disconnected while previously connected */
-		wacom->pid = 0;
-		wacom_schedule_work(wacom);
-		wacom->battery_capacity = 0;
-	}
-
-	return 0;
-}
-
-void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
-{
-	bool sync;
-
-	switch (wacom_wac->features.type) {
-	case PENPARTNER:
-		sync = wacom_penpartner_irq(wacom_wac);
-		break;
-
-	case PL:
-		sync = wacom_pl_irq(wacom_wac);
-		break;
-
-	case WACOM_G4:
-	case GRAPHIRE:
-	case WACOM_MO:
-		sync = wacom_graphire_irq(wacom_wac);
-		break;
-
-	case PTU:
-		sync = wacom_ptu_irq(wacom_wac);
-		break;
-
-	case DTU:
-		sync = wacom_dtu_irq(wacom_wac);
-		break;
-
-	case DTUS:
-		sync = wacom_dtus_irq(wacom_wac);
-		break;
-
-	case INTUOS:
-	case INTUOS3S:
-	case INTUOS3:
-	case INTUOS3L:
-	case INTUOS4S:
-	case INTUOS4:
-	case INTUOS4L:
-	case CINTIQ:
-	case WACOM_BEE:
-	case WACOM_13HD:
-	case WACOM_21UX2:
-	case WACOM_22HD:
-	case WACOM_24HD:
-	case DTK:
-	case CINTIQ_HYBRID:
-		sync = wacom_intuos_irq(wacom_wac);
-		break;
-
-	case WACOM_24HDT:
-		sync = wacom_24hdt_irq(wacom_wac);
-		break;
-
-	case INTUOS5S:
-	case INTUOS5:
-	case INTUOS5L:
-	case INTUOSPS:
-	case INTUOSPM:
-	case INTUOSPL:
-		if (len == WACOM_PKGLEN_BBTOUCH3)
-			sync = wacom_bpt3_touch(wacom_wac);
-		else
-			sync = wacom_intuos_irq(wacom_wac);
-		break;
-
-	case TABLETPC:
-	case TABLETPCE:
-	case TABLETPC2FG:
-	case MTSCREEN:
-	case MTTPC:
-	case MTTPC_B:
-		sync = wacom_tpc_irq(wacom_wac, len);
-		break;
-
-	case BAMBOO_PT:
-	case INTUOSHT:
-		sync = wacom_bpt_irq(wacom_wac, len);
-		break;
-
-	case WIRELESS:
-		sync = wacom_wireless_irq(wacom_wac, len);
-		break;
-
-	default:
-		sync = false;
-		break;
-	}
-
-	if (sync)
-		input_sync(wacom_wac->input);
-}
-
-static void wacom_setup_cintiq(struct wacom_wac *wacom_wac)
-{
-	struct input_dev *input_dev = wacom_wac->input;
-
-	input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
-
-	__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
-	__set_bit(BTN_TOOL_PEN, input_dev->keybit);
-	__set_bit(BTN_TOOL_BRUSH, input_dev->keybit);
-	__set_bit(BTN_TOOL_PENCIL, input_dev->keybit);
-	__set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit);
-	__set_bit(BTN_STYLUS, input_dev->keybit);
-	__set_bit(BTN_STYLUS2, input_dev->keybit);
-
-	input_set_abs_params(input_dev, ABS_DISTANCE,
-			     0, wacom_wac->features.distance_max, 0, 0);
-	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
-}
-
-static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
-{
-	struct input_dev *input_dev = wacom_wac->input;
-
-	input_set_capability(input_dev, EV_REL, REL_WHEEL);
-
-	wacom_setup_cintiq(wacom_wac);
-
-	__set_bit(BTN_LEFT, input_dev->keybit);
-	__set_bit(BTN_RIGHT, input_dev->keybit);
-	__set_bit(BTN_MIDDLE, input_dev->keybit);
-	__set_bit(BTN_SIDE, input_dev->keybit);
-	__set_bit(BTN_EXTRA, input_dev->keybit);
-	__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
-	__set_bit(BTN_TOOL_LENS, input_dev->keybit);
-
-	input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
-	input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
-}
-
-void wacom_setup_device_quirks(struct wacom_features *features)
-{
-
-	/* touch device found but size is not defined. use default */
-	if (features->device_type == BTN_TOOL_FINGER && !features->x_max) {
-		features->x_max = 1023;
-		features->y_max = 1023;
-	}
-
-	/* these device have multiple inputs */
-	if (features->type >= WIRELESS ||
-	    (features->type >= INTUOS5S && features->type <= INTUOSHT) ||
-	    (features->oVid && features->oPid))
-		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
-
-	/* quirk for bamboo touch with 2 low res touches */
-	if (features->type == BAMBOO_PT &&
-	    features->pktlen == WACOM_PKGLEN_BBTOUCH) {
-		features->x_max <<= 5;
-		features->y_max <<= 5;
-		features->x_fuzz <<= 5;
-		features->y_fuzz <<= 5;
-		features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
-	}
-
-	if (features->type == WIRELESS) {
-
-		/* monitor never has input and pen/touch have delayed create */
-		features->quirks |= WACOM_QUIRK_NO_INPUT;
-
-		/* must be monitor interface if no device_type set */
-		if (!features->device_type)
-			features->quirks |= WACOM_QUIRK_MONITOR;
-	}
-}
-
-static void wacom_abs_set_axis(struct input_dev *input_dev,
-			       struct wacom_wac *wacom_wac)
-{
-	struct wacom_features *features = &wacom_wac->features;
-
-	if (features->device_type == BTN_TOOL_PEN) {
-		input_set_abs_params(input_dev, ABS_X, features->x_min,
-				     features->x_max, features->x_fuzz, 0);
-		input_set_abs_params(input_dev, ABS_Y, features->y_min,
-				     features->y_max, features->y_fuzz, 0);
-		input_set_abs_params(input_dev, ABS_PRESSURE, 0,
-			features->pressure_max, features->pressure_fuzz, 0);
-
-		/* penabled devices have fixed resolution for each model */
-		input_abs_set_res(input_dev, ABS_X, features->x_resolution);
-		input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
-	} else {
-		if (features->touch_max == 1) {
-			input_set_abs_params(input_dev, ABS_X, 0,
-				features->x_max, features->x_fuzz, 0);
-			input_set_abs_params(input_dev, ABS_Y, 0,
-				features->y_max, features->y_fuzz, 0);
-			input_abs_set_res(input_dev, ABS_X,
-					  features->x_resolution);
-			input_abs_set_res(input_dev, ABS_Y,
-					  features->y_resolution);
-		}
-
-		if (features->touch_max > 1) {
-			input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
-				features->x_max, features->x_fuzz, 0);
-			input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
-				features->y_max, features->y_fuzz, 0);
-			input_abs_set_res(input_dev, ABS_MT_POSITION_X,
-					  features->x_resolution);
-			input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
-					  features->y_resolution);
-		}
-	}
-}
-
-int wacom_setup_input_capabilities(struct input_dev *input_dev,
-				   struct wacom_wac *wacom_wac)
-{
-	struct wacom_features *features = &wacom_wac->features;
-	int i;
-
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
-	__set_bit(BTN_TOUCH, input_dev->keybit);
-	__set_bit(ABS_MISC, input_dev->absbit);
-
-	wacom_abs_set_axis(input_dev, wacom_wac);
-
-	switch (features->type) {
-	case WACOM_MO:
-		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
-		/* fall through */
-
-	case WACOM_G4:
-		input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
-
-		__set_bit(BTN_BACK, input_dev->keybit);
-		__set_bit(BTN_FORWARD, input_dev->keybit);
-		/* fall through */
-
-	case GRAPHIRE:
-		input_set_capability(input_dev, EV_REL, REL_WHEEL);
-
-		__set_bit(BTN_LEFT, input_dev->keybit);
-		__set_bit(BTN_RIGHT, input_dev->keybit);
-		__set_bit(BTN_MIDDLE, input_dev->keybit);
-
-		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
-		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
-		__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
-		__set_bit(BTN_STYLUS, input_dev->keybit);
-		__set_bit(BTN_STYLUS2, input_dev->keybit);
-
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-		break;
-
-	case WACOM_24HD:
-		__set_bit(BTN_A, input_dev->keybit);
-		__set_bit(BTN_B, input_dev->keybit);
-		__set_bit(BTN_C, input_dev->keybit);
-		__set_bit(BTN_X, input_dev->keybit);
-		__set_bit(BTN_Y, input_dev->keybit);
-		__set_bit(BTN_Z, input_dev->keybit);
-
-		for (i = 6; i < 10; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
-		__set_bit(KEY_PROG1, input_dev->keybit);
-		__set_bit(KEY_PROG2, input_dev->keybit);
-		__set_bit(KEY_PROG3, input_dev->keybit);
-
-		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-		input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
-		/* fall through */
-
-	case DTK:
-		for (i = 0; i < 6; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
-		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
-
-		wacom_setup_cintiq(wacom_wac);
-		break;
-
-	case WACOM_22HD:
-		__set_bit(KEY_PROG1, input_dev->keybit);
-		__set_bit(KEY_PROG2, input_dev->keybit);
-		__set_bit(KEY_PROG3, input_dev->keybit);
-		/* fall through */
-
-	case WACOM_21UX2:
-		__set_bit(BTN_A, input_dev->keybit);
-		__set_bit(BTN_B, input_dev->keybit);
-		__set_bit(BTN_C, input_dev->keybit);
-		__set_bit(BTN_X, input_dev->keybit);
-		__set_bit(BTN_Y, input_dev->keybit);
-		__set_bit(BTN_Z, input_dev->keybit);
-		__set_bit(BTN_BASE, input_dev->keybit);
-		__set_bit(BTN_BASE2, input_dev->keybit);
-		/* fall through */
-
-	case WACOM_BEE:
-		__set_bit(BTN_8, input_dev->keybit);
-		__set_bit(BTN_9, input_dev->keybit);
-		/* fall through */
-
-	case CINTIQ:
-		for (i = 0; i < 8; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
-		input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
-		input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
-		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-
-		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
-
-		wacom_setup_cintiq(wacom_wac);
-		break;
-
-	case WACOM_13HD:
-		for (i = 0; i < 9; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
-		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
-		wacom_setup_cintiq(wacom_wac);
-		break;
-
-	case INTUOS3:
-	case INTUOS3L:
-		__set_bit(BTN_4, input_dev->keybit);
-		__set_bit(BTN_5, input_dev->keybit);
-		__set_bit(BTN_6, input_dev->keybit);
-		__set_bit(BTN_7, input_dev->keybit);
-
-		input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
-		/* fall through */
-
-	case INTUOS3S:
-		__set_bit(BTN_0, input_dev->keybit);
-		__set_bit(BTN_1, input_dev->keybit);
-		__set_bit(BTN_2, input_dev->keybit);
-		__set_bit(BTN_3, input_dev->keybit);
-
-		input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
-		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-		/* fall through */
-
-	case INTUOS:
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-
-		wacom_setup_intuos(wacom_wac);
-		break;
-
-	case INTUOS5:
-	case INTUOS5L:
-	case INTUOSPM:
-	case INTUOSPL:
-		if (features->device_type == BTN_TOOL_PEN) {
-			__set_bit(BTN_7, input_dev->keybit);
-			__set_bit(BTN_8, input_dev->keybit);
-		}
-		/* fall through */
-
-	case INTUOS5S:
-	case INTUOSPS:
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-
-		if (features->device_type == BTN_TOOL_PEN) {
-			for (i = 0; i < 7; i++)
-				__set_bit(BTN_0 + i, input_dev->keybit);
-
-			input_set_abs_params(input_dev, ABS_DISTANCE, 0,
-					      features->distance_max,
-					      0, 0);
-
-			input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-
-			wacom_setup_intuos(wacom_wac);
-		} else if (features->device_type == BTN_TOOL_FINGER) {
-			__clear_bit(ABS_MISC, input_dev->absbit);
-
-			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
-			                     0, features->x_max, 0, 0);
-			input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
-			                     0, features->y_max, 0, 0);
-			input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
-		}
-		break;
-
-	case INTUOS4:
-	case INTUOS4L:
-		__set_bit(BTN_7, input_dev->keybit);
-		__set_bit(BTN_8, input_dev->keybit);
-		/* fall through */
-
-	case INTUOS4S:
-		for (i = 0; i < 7; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
-		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-		wacom_setup_intuos(wacom_wac);
-
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-		break;
-
-	case WACOM_24HDT:
-		if (features->device_type == BTN_TOOL_FINGER) {
-			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
-			input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0);
-			input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0);
-			input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
-		}
-		/* fall through */
-
-	case MTSCREEN:
-	case MTTPC:
-	case MTTPC_B:
-	case TABLETPC2FG:
-		if (features->device_type == BTN_TOOL_FINGER && features->touch_max > 1)
-			input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT);
-		/* fall through */
-
-	case TABLETPC:
-	case TABLETPCE:
-		__clear_bit(ABS_MISC, input_dev->absbit);
-
-		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
-
-		if (features->device_type != BTN_TOOL_PEN)
-			break;  /* no need to process stylus stuff */
-
-		/* fall through */
-
-	case DTUS:
-	case PL:
-	case DTU:
-		if (features->type == DTUS) {
-			input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
-			for (i = 0; i < 4; i++)
-				__set_bit(BTN_0 + i, input_dev->keybit);
-		}
-		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
-		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
-		__set_bit(BTN_STYLUS, input_dev->keybit);
-		__set_bit(BTN_STYLUS2, input_dev->keybit);
-
-		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
-		break;
-
-	case PTU:
-		__set_bit(BTN_STYLUS2, input_dev->keybit);
-		/* fall through */
-
-	case PENPARTNER:
-		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
-		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
-		__set_bit(BTN_STYLUS, input_dev->keybit);
-
-		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-		break;
-
-	case INTUOSHT:
-		if (features->touch_max &&
-		    features->device_type == BTN_TOOL_FINGER) {
-			input_dev->evbit[0] |= BIT_MASK(EV_SW);
-			__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
-		}
-		/* fall through */
-
-	case BAMBOO_PT:
-		__clear_bit(ABS_MISC, input_dev->absbit);
-
-		if (features->device_type == BTN_TOOL_FINGER) {
-
-			__set_bit(BTN_LEFT, input_dev->keybit);
-			__set_bit(BTN_FORWARD, input_dev->keybit);
-			__set_bit(BTN_BACK, input_dev->keybit);
-			__set_bit(BTN_RIGHT, input_dev->keybit);
-
-			if (features->touch_max) {
-				if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
-					input_set_abs_params(input_dev,
-						     ABS_MT_TOUCH_MAJOR,
-						     0, features->x_max, 0, 0);
-					input_set_abs_params(input_dev,
-						     ABS_MT_TOUCH_MINOR,
-						     0, features->y_max, 0, 0);
-				}
-				input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
-			} else {
-				/* buttons/keys only interface */
-				__clear_bit(ABS_X, input_dev->absbit);
-				__clear_bit(ABS_Y, input_dev->absbit);
-				__clear_bit(BTN_TOUCH, input_dev->keybit);
-			}
-		} else if (features->device_type == BTN_TOOL_PEN) {
-			__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
-			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
-			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
-			__set_bit(BTN_STYLUS, input_dev->keybit);
-			__set_bit(BTN_STYLUS2, input_dev->keybit);
-			input_set_abs_params(input_dev, ABS_DISTANCE, 0,
-					      features->distance_max,
-					      0, 0);
-		}
-		break;
-
-	case CINTIQ_HYBRID:
-		__set_bit(BTN_1, input_dev->keybit);
-		__set_bit(BTN_2, input_dev->keybit);
-		__set_bit(BTN_3, input_dev->keybit);
-		__set_bit(BTN_4, input_dev->keybit);
-
-		__set_bit(BTN_5, input_dev->keybit);
-		__set_bit(BTN_6, input_dev->keybit);
-		__set_bit(BTN_7, input_dev->keybit);
-		__set_bit(BTN_8, input_dev->keybit);
-		__set_bit(BTN_0, input_dev->keybit);
-
-		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
-		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
-
-		wacom_setup_cintiq(wacom_wac);
-		break;
-	}
-	return 0;
-}
-
-static const struct wacom_features wacom_features_0x00 =
-	{ "Wacom Penpartner",     WACOM_PKGLEN_PENPRTN,    5040,  3780,  255,
-	  0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
-static const struct wacom_features wacom_features_0x10 =
-	{ "Wacom Graphire",       WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511,
-	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x11 =
-	{ "Wacom Graphire2 4x5",  WACOM_PKGLEN_GRAPHIRE,  10206,  7422,  511,
-	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x12 =
-	{ "Wacom Graphire2 5x7",  WACOM_PKGLEN_GRAPHIRE,  13918, 10206,  511,
-	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x13 =
-	{ "Wacom Graphire3",      WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511,
-	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x14 =
-	{ "Wacom Graphire3 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
-	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x15 =
-	{ "Wacom Graphire4 4x5",  WACOM_PKGLEN_GRAPHIRE,  10208,  7424,  511,
-	  63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x16 =
-	{ "Wacom Graphire4 6x8",  WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
-	  63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x17 =
-	{ "Wacom BambooFun 4x5",  WACOM_PKGLEN_BBFUN,     14760,  9225,  511,
-	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x18 =
-	{ "Wacom BambooFun 6x8",  WACOM_PKGLEN_BBFUN,     21648, 13530,  511,
-	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x19 =
-	{ "Wacom Bamboo1 Medium", WACOM_PKGLEN_GRAPHIRE,  16704, 12064,  511,
-	  63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
-static const struct wacom_features wacom_features_0x60 =
-	{ "Wacom Volito",         WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
-	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
-static const struct wacom_features wacom_features_0x61 =
-	{ "Wacom PenStation2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  255,
-	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
-static const struct wacom_features wacom_features_0x62 =
-	{ "Wacom Volito2 4x5",    WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
-	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
-static const struct wacom_features wacom_features_0x63 =
-	{ "Wacom Volito2 2x3",    WACOM_PKGLEN_GRAPHIRE,   3248,  2320,  511,
-	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
-static const struct wacom_features wacom_features_0x64 =
-	{ "Wacom PenPartner2",    WACOM_PKGLEN_GRAPHIRE,   3250,  2320,  511,
-	  63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
-static const struct wacom_features wacom_features_0x65 =
-	{ "Wacom Bamboo",         WACOM_PKGLEN_BBFUN,     14760,  9225,  511,
-	  63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x69 =
-	{ "Wacom Bamboo1",        WACOM_PKGLEN_GRAPHIRE,   5104,  3712,  511,
-	  63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
-static const struct wacom_features wacom_features_0x6A =
-	{ "Wacom Bamboo1 4x6",    WACOM_PKGLEN_GRAPHIRE,  14760,  9225, 1023,
-	  63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x6B =
-	{ "Wacom Bamboo1 5x8",    WACOM_PKGLEN_GRAPHIRE,  21648, 13530, 1023,
-	  63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x20 =
-	{ "Wacom Intuos 4x5",     WACOM_PKGLEN_INTUOS,    12700, 10600, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x21 =
-	{ "Wacom Intuos 6x8",     WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x22 =
-	{ "Wacom Intuos 9x12",    WACOM_PKGLEN_INTUOS,    30480, 24060, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x23 =
-	{ "Wacom Intuos 12x12",   WACOM_PKGLEN_INTUOS,    30480, 31680, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x24 =
-	{ "Wacom Intuos 12x18",   WACOM_PKGLEN_INTUOS,    45720, 31680, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x30 =
-	{ "Wacom PL400",          WACOM_PKGLEN_GRAPHIRE,   5408,  4056,  255,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x31 =
-	{ "Wacom PL500",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  255,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x32 =
-	{ "Wacom PL600",          WACOM_PKGLEN_GRAPHIRE,   6126,  4604,  255,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x33 =
-	{ "Wacom PL600SX",        WACOM_PKGLEN_GRAPHIRE,   6260,  5016,  255,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x34 =
-	{ "Wacom PL550",          WACOM_PKGLEN_GRAPHIRE,   6144,  4608,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x35 =
-	{ "Wacom PL800",          WACOM_PKGLEN_GRAPHIRE,   7220,  5780,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x37 =
-	{ "Wacom PL700",          WACOM_PKGLEN_GRAPHIRE,   6758,  5406,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x38 =
-	{ "Wacom PL510",          WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x39 =
-	{ "Wacom DTU710",         WACOM_PKGLEN_GRAPHIRE,  34080, 27660,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0xC4 =
-	{ "Wacom DTF521",         WACOM_PKGLEN_GRAPHIRE,   6282,  4762,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0xC0 =
-	{ "Wacom DTF720",         WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0xC2 =
-	{ "Wacom DTF720a",        WACOM_PKGLEN_GRAPHIRE,   6858,  5506,  511,
-	  0, PL, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x03 =
-	{ "Wacom Cintiq Partner", WACOM_PKGLEN_GRAPHIRE,  20480, 15360,  511,
-	  0, PTU, WACOM_PL_RES, WACOM_PL_RES };
-static const struct wacom_features wacom_features_0x41 =
-	{ "Wacom Intuos2 4x5",    WACOM_PKGLEN_INTUOS,    12700, 10600, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x42 =
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x43 =
-	{ "Wacom Intuos2 9x12",   WACOM_PKGLEN_INTUOS,    30480, 24060, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x44 =
-	{ "Wacom Intuos2 12x12",  WACOM_PKGLEN_INTUOS,    30480, 31680, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x45 =
-	{ "Wacom Intuos2 12x18",  WACOM_PKGLEN_INTUOS,    45720, 31680, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xB0 =
-	{ "Wacom Intuos3 4x5",    WACOM_PKGLEN_INTUOS,    25400, 20320, 1023,
-	  63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB1 =
-	{ "Wacom Intuos3 6x8",    WACOM_PKGLEN_INTUOS,    40640, 30480, 1023,
-	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB2 =
-	{ "Wacom Intuos3 9x12",   WACOM_PKGLEN_INTUOS,    60960, 45720, 1023,
-	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB3 =
-	{ "Wacom Intuos3 12x12",  WACOM_PKGLEN_INTUOS,    60960, 60960, 1023,
-	  63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB4 =
-	{ "Wacom Intuos3 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 1023,
-	  63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB5 =
-	{ "Wacom Intuos3 6x11",   WACOM_PKGLEN_INTUOS,    54204, 31750, 1023,
-	  63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB7 =
-	{ "Wacom Intuos3 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 1023,
-	  63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB8 =
-	{ "Wacom Intuos4 4x6",    WACOM_PKGLEN_INTUOS,    31496, 19685, 2047,
-	  63, INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xB9 =
-	{ "Wacom Intuos4 6x9",    WACOM_PKGLEN_INTUOS,    44704, 27940, 2047,
-	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xBA =
-	{ "Wacom Intuos4 8x13",   WACOM_PKGLEN_INTUOS,    65024, 40640, 2047,
-	  63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xBB =
-	{ "Wacom Intuos4 12x19",  WACOM_PKGLEN_INTUOS,    97536, 60960, 2047,
-	  63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xBC =
-	{ "Wacom Intuos4 WL",     WACOM_PKGLEN_INTUOS,    40640, 25400, 2047,
-	  63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0x26 =
-	{ "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
-	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x27 =
-	{ "Wacom Intuos5 touch M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
-	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x28 =
-	{ "Wacom Intuos5 touch L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047,
-	  63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x29 =
-	{ "Wacom Intuos5 S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
-	  63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0x2A =
-	{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
-	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0x314 =
-	{ "Wacom Intuos Pro S", WACOM_PKGLEN_INTUOS,  31496, 19685, 2047,
-	  63, INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x315 =
-	{ "Wacom Intuos Pro M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
-	  63, INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x317 =
-	{ "Wacom Intuos Pro L", WACOM_PKGLEN_INTUOS,  65024, 40640, 2047,
-	  63, INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0xF4 =
-	{ "Wacom Cintiq 24HD",       WACOM_PKGLEN_INTUOS,   104280, 65400, 2047,
-	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
-static const struct wacom_features wacom_features_0xF8 =
-	{ "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS,   104280, 65400, 2047, /* Pen */
-	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
-static const struct wacom_features wacom_features_0xF6 =
-	{ "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 };
-static const struct wacom_features wacom_features_0x3F =
-	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023,
-	  63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xC5 =
-	{ "Wacom Cintiq 20WSX",   WACOM_PKGLEN_INTUOS,    86680, 54180, 1023,
-	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0xC6 =
-	{ "Wacom Cintiq 12WX",    WACOM_PKGLEN_INTUOS,    53020, 33440, 1023,
-	  63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
-static const struct wacom_features wacom_features_0x304 =
-	{ "Wacom Cintiq 13HD",    WACOM_PKGLEN_INTUOS,    59352, 33648, 1023,
-	  63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
-static const struct wacom_features wacom_features_0xC7 =
-	{ "Wacom DTU1931",        WACOM_PKGLEN_GRAPHIRE,  37832, 30305,  511,
-	  0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xCE =
-	{ "Wacom DTU2231",        WACOM_PKGLEN_GRAPHIRE,  47864, 27011,  511,
-	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xF0 =
-	{ "Wacom DTU1631",        WACOM_PKGLEN_GRAPHIRE,  34623, 19553,  511,
-	  0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xFB =
-	{ "Wacom DTU1031",        WACOM_PKGLEN_DTUS,      22096, 13960,  511,
-	  0, DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x57 =
-	{ "Wacom DTK2241",        WACOM_PKGLEN_INTUOS,    95640, 54060, 2047,
-	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
-static const struct wacom_features wacom_features_0x59 = /* Pen */
-	{ "Wacom DTH2242",        WACOM_PKGLEN_INTUOS,    95640, 54060, 2047,
-	  63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
-static const struct wacom_features wacom_features_0x5D = /* Touch */
-	{ "Wacom DTH2242",       .type = WACOM_24HDT,
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10 };
-static const struct wacom_features wacom_features_0xCC =
-	{ "Wacom Cintiq 21UX2",   WACOM_PKGLEN_INTUOS,    87000, 65400, 2047,
-	  63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
-static const struct wacom_features wacom_features_0xFA =
-	{ "Wacom Cintiq 22HD",    WACOM_PKGLEN_INTUOS,    95640, 54060, 2047,
-	  63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200 };
-static const struct wacom_features wacom_features_0x5B =
-	{ "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS,      95640, 54060, 2047,
-	  63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
-static const struct wacom_features wacom_features_0x5E =
-	{ "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 };
-static const struct wacom_features wacom_features_0x90 =
-	{ "Wacom ISDv4 90",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
-	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x93 =
-	{ "Wacom ISDv4 93",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
-	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x97 =
-	{ "Wacom ISDv4 97",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  511,
-	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x9A =
-	{ "Wacom ISDv4 9A",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
-	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x9F =
-	{ "Wacom ISDv4 9F",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
-	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xE2 =
-	{ "Wacom ISDv4 E2",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xE3 =
-	{ "Wacom ISDv4 E3",       WACOM_PKGLEN_TPC2FG,    26202, 16325,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xE5 =
-	{ "Wacom ISDv4 E5",       WACOM_PKGLEN_MTOUCH,    26202, 16325,  255,
-	  0, MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xE6 =
-	{ "Wacom ISDv4 E6",       WACOM_PKGLEN_TPC2FG,    27760, 15694,  255,
-	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xEC =
-	{ "Wacom ISDv4 EC",       WACOM_PKGLEN_GRAPHIRE,  25710, 14500,  255,
-	  0, TABLETPC,    WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xED =
-	{ "Wacom ISDv4 ED",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
-	  0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xEF =
-	{ "Wacom ISDv4 EF",       WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
-	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x100 =
-	{ "Wacom ISDv4 100",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
-	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x101 =
-	{ "Wacom ISDv4 101",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
-	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x10D =
-	{ "Wacom ISDv4 10D",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
-	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x10E =
-	{ "Wacom ISDv4 10E",      WACOM_PKGLEN_MTTPC,     27760, 15694,  255,
-	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x10F =
-	{ "Wacom ISDv4 10F",      WACOM_PKGLEN_MTTPC,     27760, 15694,  255,
-	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x116 =
-	{ "Wacom ISDv4 116",      WACOM_PKGLEN_GRAPHIRE,  26202, 16325,  255,
-	  0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x4001 =
-	{ "Wacom ISDv4 4001",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
-	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x4004 =
-	{ "Wacom ISDv4 4004",      WACOM_PKGLEN_MTTPC,     11060, 6220,  255,
-	  0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x5000 =
-	{ "Wacom ISDv4 5000",      WACOM_PKGLEN_MTTPC,     27848, 15752,  1023,
-	  0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x5002 =
-	{ "Wacom ISDv4 5002",      WACOM_PKGLEN_MTTPC,     29576, 16724,  1023,
-	  0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x47 =
-	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
-	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x84 =
-	{ "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0,
-	  0, WIRELESS, 0, 0, .touch_max = 16 };
-static const struct wacom_features wacom_features_0xD0 =
-	{ "Wacom Bamboo 2FG",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xD1 =
-	{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xD2 =
-	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xD3 =
-	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xD4 =
-	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xD5 =
-	{ "Wacom Bamboo Pen 6x8",     WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xD6 =
-	{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN,   14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xD7 =
-	{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xD8 =
-	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xDA =
-	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xDB =
-	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 2 };
-static const struct wacom_features wacom_features_0xDD =
-        { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN,     14720,  9200, 1023,
-          31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0xDE =
-        { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN,    14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0xDF =
-        { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN,    21648, 13700, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x300 =
-	{ "Wacom Bamboo One S",    WACOM_PKGLEN_BBPEN,    14720,  9225, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x301 =
-	{ "Wacom Bamboo One M",    WACOM_PKGLEN_BBPEN,    21648, 13530, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x302 =
-	{ "Wacom Intuos PT S",     WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
-	  31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x303 =
-	{ "Wacom Intuos PT M",     WACOM_PKGLEN_BBPEN,    21600, 13500, 1023,
-	  31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
-	  .touch_max = 16 };
-static const struct wacom_features wacom_features_0x30E =
-	{ "Wacom Intuos S",        WACOM_PKGLEN_BBPEN,    15200,  9500, 1023,
-	  31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x6004 =
-	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800,  8000,  255,
-	  0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
-static const struct wacom_features wacom_features_0x0307 =
-	{ "Wacom ISDv5 307", WACOM_PKGLEN_INTUOS,  59352,  33648, 2047,
-	  63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 200, 200,
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
-static const struct wacom_features wacom_features_0x0309 =
-	{ "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */
-	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10 };
-
-#define USB_DEVICE_WACOM(prod)					\
-	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
-	.driver_info = (kernel_ulong_t)&wacom_features_##prod
-
-#define USB_DEVICE_DETAILED(prod, class, sub, proto)			\
-	USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_WACOM, prod, class,	\
-				      sub, proto),			\
-	.driver_info = (kernel_ulong_t)&wacom_features_##prod
-
-#define USB_DEVICE_LENOVO(prod)					\
-	USB_DEVICE(USB_VENDOR_ID_LENOVO, prod),			\
-	.driver_info = (kernel_ulong_t)&wacom_features_##prod
-
-const struct usb_device_id wacom_ids[] = {
-	{ USB_DEVICE_WACOM(0x00) },
-	{ USB_DEVICE_WACOM(0x10) },
-	{ USB_DEVICE_WACOM(0x11) },
-	{ USB_DEVICE_WACOM(0x12) },
-	{ USB_DEVICE_WACOM(0x13) },
-	{ USB_DEVICE_WACOM(0x14) },
-	{ USB_DEVICE_WACOM(0x15) },
-	{ USB_DEVICE_WACOM(0x16) },
-	{ USB_DEVICE_WACOM(0x17) },
-	{ USB_DEVICE_WACOM(0x18) },
-	{ USB_DEVICE_WACOM(0x19) },
-	{ USB_DEVICE_WACOM(0x60) },
-	{ USB_DEVICE_WACOM(0x61) },
-	{ USB_DEVICE_WACOM(0x62) },
-	{ USB_DEVICE_WACOM(0x63) },
-	{ USB_DEVICE_WACOM(0x64) },
-	{ USB_DEVICE_WACOM(0x65) },
-	{ USB_DEVICE_WACOM(0x69) },
-	{ USB_DEVICE_WACOM(0x6A) },
-	{ USB_DEVICE_WACOM(0x6B) },
-	{ USB_DEVICE_WACOM(0x20) },
-	{ USB_DEVICE_WACOM(0x21) },
-	{ USB_DEVICE_WACOM(0x22) },
-	{ USB_DEVICE_WACOM(0x23) },
-	{ USB_DEVICE_WACOM(0x24) },
-	{ USB_DEVICE_WACOM(0x30) },
-	{ USB_DEVICE_WACOM(0x31) },
-	{ USB_DEVICE_WACOM(0x32) },
-	{ USB_DEVICE_WACOM(0x33) },
-	{ USB_DEVICE_WACOM(0x34) },
-	{ USB_DEVICE_WACOM(0x35) },
-	{ USB_DEVICE_WACOM(0x37) },
-	{ USB_DEVICE_WACOM(0x38) },
-	{ USB_DEVICE_WACOM(0x39) },
-	{ USB_DEVICE_WACOM(0xC4) },
-	{ USB_DEVICE_WACOM(0xC0) },
-	{ USB_DEVICE_WACOM(0xC2) },
-	{ USB_DEVICE_WACOM(0x03) },
-	{ USB_DEVICE_WACOM(0x41) },
-	{ USB_DEVICE_WACOM(0x42) },
-	{ USB_DEVICE_WACOM(0x43) },
-	{ USB_DEVICE_WACOM(0x44) },
-	{ USB_DEVICE_WACOM(0x45) },
-	{ USB_DEVICE_WACOM(0x57) },
-	{ USB_DEVICE_WACOM(0x59) },
-	{ USB_DEVICE_DETAILED(0x5D, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_WACOM(0x5B) },
-	{ USB_DEVICE_DETAILED(0x5E, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_WACOM(0xB0) },
-	{ USB_DEVICE_WACOM(0xB1) },
-	{ USB_DEVICE_WACOM(0xB2) },
-	{ USB_DEVICE_WACOM(0xB3) },
-	{ USB_DEVICE_WACOM(0xB4) },
-	{ USB_DEVICE_WACOM(0xB5) },
-	{ USB_DEVICE_WACOM(0xB7) },
-	{ USB_DEVICE_WACOM(0xB8) },
-	{ USB_DEVICE_WACOM(0xB9) },
-	{ USB_DEVICE_WACOM(0xBA) },
-	{ USB_DEVICE_WACOM(0xBB) },
-	{ USB_DEVICE_WACOM(0xBC) },
-	{ USB_DEVICE_WACOM(0x26) },
-	{ USB_DEVICE_WACOM(0x27) },
-	{ USB_DEVICE_WACOM(0x28) },
-	{ USB_DEVICE_WACOM(0x29) },
-	{ USB_DEVICE_WACOM(0x2A) },
-	{ USB_DEVICE_WACOM(0x3F) },
-	{ USB_DEVICE_WACOM(0xC5) },
-	{ USB_DEVICE_WACOM(0xC6) },
-	{ USB_DEVICE_WACOM(0xC7) },
-	/*
-	 * DTU-2231 has two interfaces on the same configuration,
-	 * only one is used.
-	 */
-	{ USB_DEVICE_DETAILED(0xCE, USB_CLASS_HID,
-			      USB_INTERFACE_SUBCLASS_BOOT,
-			      USB_INTERFACE_PROTOCOL_MOUSE) },
-	{ USB_DEVICE_WACOM(0x84) },
-	{ USB_DEVICE_WACOM(0xD0) },
-	{ USB_DEVICE_WACOM(0xD1) },
-	{ USB_DEVICE_WACOM(0xD2) },
-	{ USB_DEVICE_WACOM(0xD3) },
-	{ USB_DEVICE_WACOM(0xD4) },
-	{ USB_DEVICE_WACOM(0xD5) },
-	{ USB_DEVICE_WACOM(0xD6) },
-	{ USB_DEVICE_WACOM(0xD7) },
-	{ USB_DEVICE_WACOM(0xD8) },
-	{ USB_DEVICE_WACOM(0xDA) },
-	{ USB_DEVICE_WACOM(0xDB) },
-	{ USB_DEVICE_WACOM(0xDD) },
-	{ USB_DEVICE_WACOM(0xDE) },
-	{ USB_DEVICE_WACOM(0xDF) },
-	{ USB_DEVICE_WACOM(0xF0) },
-	{ USB_DEVICE_WACOM(0xCC) },
-	{ USB_DEVICE_WACOM(0x90) },
-	{ USB_DEVICE_WACOM(0x93) },
-	{ USB_DEVICE_WACOM(0x97) },
-	{ USB_DEVICE_WACOM(0x9A) },
-	{ USB_DEVICE_WACOM(0x9F) },
-	{ USB_DEVICE_WACOM(0xE2) },
-	{ USB_DEVICE_WACOM(0xE3) },
-	{ USB_DEVICE_WACOM(0xE5) },
-	{ USB_DEVICE_WACOM(0xE6) },
-	{ USB_DEVICE_WACOM(0xEC) },
-	{ USB_DEVICE_WACOM(0xED) },
-	{ USB_DEVICE_WACOM(0xEF) },
-	{ USB_DEVICE_WACOM(0x100) },
-	{ USB_DEVICE_WACOM(0x101) },
-	{ USB_DEVICE_WACOM(0x10D) },
-	{ USB_DEVICE_WACOM(0x10E) },
-	{ USB_DEVICE_WACOM(0x10F) },
-	{ USB_DEVICE_WACOM(0x116) },
-	{ USB_DEVICE_WACOM(0x300) },
-	{ USB_DEVICE_WACOM(0x301) },
-	{ USB_DEVICE_DETAILED(0x302, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_DETAILED(0x303, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_DETAILED(0x30E, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_WACOM(0x304) },
-	{ USB_DEVICE_DETAILED(0x314, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_DETAILED(0x315, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_DETAILED(0x317, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_WACOM(0x4001) },
-	{ USB_DEVICE_WACOM(0x4004) },
-	{ USB_DEVICE_WACOM(0x5000) },
-	{ USB_DEVICE_WACOM(0x5002) },
-	{ USB_DEVICE_WACOM(0x47) },
-	{ USB_DEVICE_WACOM(0xF4) },
-	{ USB_DEVICE_WACOM(0xF8) },
-	{ USB_DEVICE_DETAILED(0xF6, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_WACOM(0xFA) },
-	{ USB_DEVICE_WACOM(0xFB) },
-	{ USB_DEVICE_WACOM(0x0307) },
-	{ USB_DEVICE_DETAILED(0x0309, USB_CLASS_HID, 0, 0) },
-	{ USB_DEVICE_LENOVO(0x6004) },
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
deleted file mode 100644
index b2c9a9c1b551..000000000000
--- a/drivers/input/tablet/wacom_wac.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * drivers/input/tablet/wacom_wac.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef WACOM_WAC_H
-#define WACOM_WAC_H
-
-#include <linux/types.h>
-
-/* maximum packet length for USB devices */
-#define WACOM_PKGLEN_MAX	68
-
-#define WACOM_NAME_MAX		64
-
-/* packet length for individual models */
-#define WACOM_PKGLEN_PENPRTN	 7
-#define WACOM_PKGLEN_GRAPHIRE	 8
-#define WACOM_PKGLEN_BBFUN	 9
-#define WACOM_PKGLEN_INTUOS	10
-#define WACOM_PKGLEN_TPC1FG	 5
-#define WACOM_PKGLEN_TPC1FG_B	10
-#define WACOM_PKGLEN_TPC2FG	14
-#define WACOM_PKGLEN_BBTOUCH	20
-#define WACOM_PKGLEN_BBTOUCH3	64
-#define WACOM_PKGLEN_BBPEN	10
-#define WACOM_PKGLEN_WIRELESS	32
-#define WACOM_PKGLEN_MTOUCH	62
-#define WACOM_PKGLEN_MTTPC	40
-#define WACOM_PKGLEN_DTUS	68
-#define WACOM_PKGLEN_PENABLED	 8
-
-/* wacom data size per MT contact */
-#define WACOM_BYTES_PER_MT_PACKET	11
-#define WACOM_BYTES_PER_24HDT_PACKET	14
-
-/* device IDs */
-#define STYLUS_DEVICE_ID	0x02
-#define TOUCH_DEVICE_ID		0x03
-#define CURSOR_DEVICE_ID	0x06
-#define ERASER_DEVICE_ID	0x0A
-#define PAD_DEVICE_ID		0x0F
-
-/* wacom data packet report IDs */
-#define WACOM_REPORT_PENABLED		2
-#define WACOM_REPORT_INTUOSREAD		5
-#define WACOM_REPORT_INTUOSWRITE	6
-#define WACOM_REPORT_INTUOSPAD		12
-#define WACOM_REPORT_INTUOS5PAD		3
-#define WACOM_REPORT_DTUSPAD		21
-#define WACOM_REPORT_TPC1FG		6
-#define WACOM_REPORT_TPC2FG		13
-#define WACOM_REPORT_TPCMT		13
-#define WACOM_REPORT_TPCMT2		3
-#define WACOM_REPORT_TPCHID		15
-#define WACOM_REPORT_TPCST		16
-#define WACOM_REPORT_DTUS		17
-#define WACOM_REPORT_TPC1FGE		18
-#define WACOM_REPORT_24HDT		1
-#define WACOM_REPORT_WL			128
-#define WACOM_REPORT_USB		192
-
-/* device quirks */
-#define WACOM_QUIRK_MULTI_INPUT		0x0001
-#define WACOM_QUIRK_BBTOUCH_LOWRES	0x0002
-#define WACOM_QUIRK_NO_INPUT		0x0004
-#define WACOM_QUIRK_MONITOR		0x0008
-
-enum {
-	PENPARTNER = 0,
-	GRAPHIRE,
-	WACOM_G4,
-	PTU,
-	PL,
-	DTU,
-	DTUS,
-	INTUOS,
-	INTUOS3S,
-	INTUOS3,
-	INTUOS3L,
-	INTUOS4S,
-	INTUOS4,
-	INTUOS4L,
-	INTUOS5S,
-	INTUOS5,
-	INTUOS5L,
-	INTUOSPS,
-	INTUOSPM,
-	INTUOSPL,
-	INTUOSHT,
-	WACOM_21UX2,
-	WACOM_22HD,
-	DTK,
-	WACOM_24HD,
-	CINTIQ_HYBRID,
-	CINTIQ,
-	WACOM_BEE,
-	WACOM_13HD,
-	WACOM_MO,
-	WIRELESS,
-	BAMBOO_PT,
-	WACOM_24HDT,
-	TABLETPC,   /* add new TPC below */
-	TABLETPCE,
-	TABLETPC2FG,
-	MTSCREEN,
-	MTTPC,
-	MTTPC_B,
-	MAX_TYPE
-};
-
-struct wacom_features {
-	const char *name;
-	int pktlen;
-	int x_max;
-	int y_max;
-	int pressure_max;
-	int distance_max;
-	int type;
-	int x_resolution;
-	int y_resolution;
-	int x_min;
-	int y_min;
-	int device_type;
-	int x_phy;
-	int y_phy;
-	unsigned char unit;
-	unsigned char unitExpo;
-	int x_fuzz;
-	int y_fuzz;
-	int pressure_fuzz;
-	int distance_fuzz;
-	unsigned quirks;
-	unsigned touch_max;
-	int oVid;
-	int oPid;
-};
-
-struct wacom_shared {
-	bool stylus_in_proximity;
-	bool touch_down;
-	/* for wireless device to access USB interfaces */
-	unsigned touch_max;
-	int type;
-	struct input_dev *touch_input;
-};
-
-struct wacom_wac {
-	char name[WACOM_NAME_MAX];
-	unsigned char *data;
-	int tool[2];
-	int id[2];
-	__u32 serial[2];
-	struct wacom_features features;
-	struct wacom_shared *shared;
-	struct input_dev *input;
-	int pid;
-	int battery_capacity;
-	int num_contacts_left;
-};
-
-#endif
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index a23a94bb4bcb..6bb9a7dd23b6 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -471,6 +471,18 @@ config TOUCHSCREEN_HP7XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called jornada720_ts.
 
+config TOUCHSCREEN_IPAQ_MICRO
+	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Say Y here to enable support for the touchscreen attached to
+	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq-micro-ts.
+
 config TOUCHSCREEN_HTCPEN
 	tristate "HTC Shift X9500 touchscreen"
 	depends on ISA
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 126479d8c29a..4be94fce41af 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
 obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_HP7XX)		+= jornada720_ts.o
+obj-$(CONFIG_TOUCHSCREEN_IPAQ_MICRO)	+= ipaq-micro-ts.o
 obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
 obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index da201b8e37dc..e57ba52bf484 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1302,8 +1302,10 @@ static int ads7846_probe(struct spi_device *spi)
 	pdata = dev_get_platdata(&spi->dev);
 	if (!pdata) {
 		pdata = ads7846_probe_dt(&spi->dev);
-		if (IS_ERR(pdata))
-			return PTR_ERR(pdata);
+		if (IS_ERR(pdata)) {
+			err = PTR_ERR(pdata);
+			goto err_free_mem;
+		}
 	}
 
 	ts->model = pdata->model ? : 7846;
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 6e0b4a2120d3..03b85711cb70 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2,6 +2,7 @@
  * Atmel maXTouch Touchscreen driver
  *
  * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Copyright (C) 2011-2014 Atmel Corporation
  * Copyright (C) 2012 Google, Inc.
  *
  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
@@ -22,6 +23,7 @@
 #include <linux/i2c/atmel_mxt_ts.h>
 #include <linux/input/mt.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 
 /* Version */
@@ -29,8 +31,10 @@
 #define MXT_VER_21		21
 #define MXT_VER_22		22
 
-/* Firmware */
+/* Firmware files */
 #define MXT_FW_NAME		"maxtouch.fw"
+#define MXT_CFG_NAME		"maxtouch.cfg"
+#define MXT_CFG_MAGIC		"OBP_RAW V1"
 
 /* Registers */
 #define MXT_INFO		0x00
@@ -44,6 +48,8 @@
 #define MXT_OBJECT_START	0x07
 
 #define MXT_OBJECT_SIZE		6
+#define MXT_INFO_CHECKSUM_SIZE	3
+#define MXT_MAX_BLOCK_WRITE	256
 
 /* Object types */
 #define MXT_DEBUG_DIAGNOSTIC_T37	37
@@ -74,6 +80,9 @@
 #define MXT_SPT_MESSAGECOUNT_T44	44
 #define MXT_SPT_CTECONFIG_T46		46
 
+/* MXT_GEN_MESSAGE_T5 object */
+#define MXT_RPTID_NOMSG		0xff
+
 /* MXT_GEN_COMMAND_T6 field */
 #define MXT_COMMAND_RESET	0
 #define MXT_COMMAND_BACKUPNV	1
@@ -83,11 +92,20 @@
 
 /* Define for T6 status byte */
 #define MXT_T6_STATUS_RESET	(1 << 7)
+#define MXT_T6_STATUS_OFL	(1 << 6)
+#define MXT_T6_STATUS_SIGERR	(1 << 5)
+#define MXT_T6_STATUS_CAL	(1 << 4)
+#define MXT_T6_STATUS_CFGERR	(1 << 3)
+#define MXT_T6_STATUS_COMSERR	(1 << 2)
 
 /* MXT_GEN_POWER_T7 field */
-#define MXT_POWER_IDLEACQINT	0
-#define MXT_POWER_ACTVACQINT	1
-#define MXT_POWER_ACTV2IDLETO	2
+struct t7_config {
+	u8 idle;
+	u8 active;
+} __packed;
+
+#define MXT_POWER_CFG_RUN		0
+#define MXT_POWER_CFG_DEEPSLEEP		1
 
 /* MXT_GEN_ACQUIRE_T8 field */
 #define MXT_ACQUIRE_CHRGTIME	0
@@ -99,7 +117,6 @@
 #define MXT_ACQUIRE_ATCHCALSTHR	7
 
 /* MXT_TOUCH_MULTI_T9 field */
-#define MXT_TOUCH_CTRL		0
 #define MXT_T9_ORIENT		9
 #define MXT_T9_RANGE		18
 
@@ -217,11 +234,6 @@ struct mxt_object {
 	u8 num_report_ids;
 } __packed;
 
-struct mxt_message {
-	u8 reportid;
-	u8 message[7];
-};
-
 /* Each client has this additional data */
 struct mxt_data {
 	struct i2c_client *client;
@@ -234,15 +246,28 @@ struct mxt_data {
 	unsigned int max_x;
 	unsigned int max_y;
 	bool in_bootloader;
+	u16 mem_size;
+	u8 max_reportid;
 	u32 config_crc;
+	u32 info_crc;
 	u8 bootloader_addr;
+	u8 *msg_buf;
+	u8 t6_status;
+	bool update_input;
+	u8 last_message_count;
+	u8 num_touchids;
+	struct t7_config t7_cfg;
 
 	/* Cached parameters from object table */
+	u16 T5_address;
+	u8 T5_msg_size;
 	u8 T6_reportid;
 	u16 T6_address;
+	u16 T7_address;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
 	u8 T19_reportid;
+	u16 T44_address;
 
 	/* for fw update in bootloader */
 	struct completion bl_completion;
@@ -297,42 +322,10 @@ static bool mxt_object_readable(unsigned int type)
 	}
 }
 
-static bool mxt_object_writable(unsigned int type)
-{
-	switch (type) {
-	case MXT_GEN_COMMAND_T6:
-	case MXT_GEN_POWER_T7:
-	case MXT_GEN_ACQUIRE_T8:
-	case MXT_TOUCH_MULTI_T9:
-	case MXT_TOUCH_KEYARRAY_T15:
-	case MXT_TOUCH_PROXIMITY_T23:
-	case MXT_TOUCH_PROXKEY_T52:
-	case MXT_PROCI_GRIPFACE_T20:
-	case MXT_PROCG_NOISE_T22:
-	case MXT_PROCI_ONETOUCH_T24:
-	case MXT_PROCI_TWOTOUCH_T27:
-	case MXT_PROCI_GRIP_T40:
-	case MXT_PROCI_PALM_T41:
-	case MXT_PROCI_TOUCHSUPPRESSION_T42:
-	case MXT_PROCI_STYLUS_T47:
-	case MXT_PROCG_NOISESUPPRESSION_T48:
-	case MXT_SPT_COMMSCONFIG_T18:
-	case MXT_SPT_GPIOPWM_T19:
-	case MXT_SPT_SELFTEST_T25:
-	case MXT_SPT_CTECONFIG_T28:
-	case MXT_SPT_DIGITIZER_T43:
-	case MXT_SPT_CTECONFIG_T46:
-		return true;
-	default:
-		return false;
-	}
-}
-
-static void mxt_dump_message(struct device *dev,
-			     struct mxt_message *message)
+static void mxt_dump_message(struct mxt_data *data, u8 *message)
 {
-	dev_dbg(dev, "reportid: %u\tmessage: %*ph\n",
-		message->reportid, 7, message->message);
+	dev_dbg(&data->client->dev, "message: %*ph\n",
+		data->T5_msg_size, message);
 }
 
 static int mxt_wait_for_completion(struct mxt_data *data,
@@ -401,7 +394,7 @@ static int mxt_bootloader_write(struct mxt_data *data,
 	return ret;
 }
 
-static int mxt_lookup_bootloader_address(struct mxt_data *data)
+static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
 {
 	u8 appmode = data->client->addr;
 	u8 bootloader;
@@ -409,6 +402,12 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data)
 	switch (appmode) {
 	case 0x4a:
 	case 0x4b:
+		/* Chips after 1664S use different scheme */
+		if (retry || data->info.family_id >= 0xa2) {
+			bootloader = appmode - 0x24;
+			break;
+		}
+		/* Fall through for normal case */
 	case 0x4c:
 	case 0x4d:
 	case 0x5a:
@@ -426,6 +425,30 @@ static int mxt_lookup_bootloader_address(struct mxt_data *data)
 	return 0;
 }
 
+static int mxt_probe_bootloader(struct mxt_data *data, bool retry)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	u8 val;
+	bool crc_failure;
+
+	ret = mxt_lookup_bootloader_address(data, retry);
+	if (ret)
+		return ret;
+
+	ret = mxt_bootloader_read(data, &val, 1);
+	if (ret)
+		return ret;
+
+	/* Check app crc fail mode */
+	crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+
+	dev_err(dev, "Detected bootloader, status:%02X%s\n",
+			val, crc_failure ? ", APP_CRC_FAIL" : "");
+
+	return 0;
+}
+
 static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
 {
 	struct device *dev = &data->client->dev;
@@ -447,14 +470,15 @@ static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
 	}
 }
 
-static int mxt_check_bootloader(struct mxt_data *data, unsigned int state)
+static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
+				bool wait)
 {
 	struct device *dev = &data->client->dev;
 	u8 val;
 	int ret;
 
 recheck:
-	if (state != MXT_WAITING_BOOTLOAD_CMD) {
+	if (wait) {
 		/*
 		 * In application update mode, the interrupt
 		 * line signals state transitions. We must wait for the
@@ -485,6 +509,7 @@ recheck:
 	switch (state) {
 	case MXT_WAITING_BOOTLOAD_CMD:
 	case MXT_WAITING_FRAME_DATA:
+	case MXT_APP_CRC_FAIL:
 		val &= ~MXT_BOOT_STATUS_MASK;
 		break;
 	case MXT_FRAME_CRC_PASS:
@@ -508,13 +533,18 @@ recheck:
 	return 0;
 }
 
-static int mxt_unlock_bootloader(struct mxt_data *data)
+static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
 {
 	int ret;
 	u8 buf[2];
 
-	buf[0] = MXT_UNLOCK_CMD_LSB;
-	buf[1] = MXT_UNLOCK_CMD_MSB;
+	if (unlock) {
+		buf[0] = MXT_UNLOCK_CMD_LSB;
+		buf[1] = MXT_UNLOCK_CMD_MSB;
+	} else {
+		buf[0] = 0x01;
+		buf[1] = 0x01;
+	}
 
 	ret = mxt_bootloader_write(data, buf, 2);
 	if (ret)
@@ -605,40 +635,44 @@ mxt_get_object(struct mxt_data *data, u8 type)
 			return object;
 	}
 
-	dev_err(&data->client->dev, "Invalid object type T%u\n", type);
+	dev_warn(&data->client->dev, "Invalid object type T%u\n", type);
 	return NULL;
 }
 
-static int mxt_read_message(struct mxt_data *data,
-				 struct mxt_message *message)
+static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
 {
-	struct mxt_object *object;
-	u16 reg;
-
-	object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __mxt_read_reg(data->client, reg,
-			sizeof(struct mxt_message), message);
-}
+	struct device *dev = &data->client->dev;
+	u8 status = msg[1];
+	u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
 
-static int mxt_write_object(struct mxt_data *data,
-				 u8 type, u8 offset, u8 val)
-{
-	struct mxt_object *object;
-	u16 reg;
+	complete(&data->crc_completion);
 
-	object = mxt_get_object(data, type);
-	if (!object || offset >= mxt_obj_size(object))
-		return -EINVAL;
+	if (crc != data->config_crc) {
+		data->config_crc = crc;
+		dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
+	}
 
-	reg = object->start_address;
-	return mxt_write_reg(data->client, reg + offset, val);
+	/* Detect reset */
+	if (status & MXT_T6_STATUS_RESET)
+		complete(&data->reset_completion);
+
+	/* Output debug if status has changed */
+	if (status != data->t6_status)
+		dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n",
+			status,
+			status == 0 ? " OK" : "",
+			status & MXT_T6_STATUS_RESET ? " RESET" : "",
+			status & MXT_T6_STATUS_OFL ? " OFL" : "",
+			status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "",
+			status & MXT_T6_STATUS_CAL ? " CAL" : "",
+			status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "",
+			status & MXT_T6_STATUS_COMSERR ? " COMSERR" : "");
+
+	/* Save current status */
+	data->t6_status = status;
 }
 
-static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
+static void mxt_input_button(struct mxt_data *data, u8 *message)
 {
 	struct input_dev *input = data->input_dev;
 	const struct mxt_platform_data *pdata = data->pdata;
@@ -649,30 +683,33 @@ static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
 	for (i = 0; i < pdata->t19_num_keys; i++) {
 		if (pdata->t19_keymap[i] == KEY_RESERVED)
 			continue;
-		button = !(message->message[0] & (1 << i));
+		button = !(message[1] & (1 << i));
 		input_report_key(input, pdata->t19_keymap[i], button);
 	}
 }
 
-static void mxt_input_sync(struct input_dev *input_dev)
+static void mxt_input_sync(struct mxt_data *data)
 {
-	input_mt_report_pointer_emulation(input_dev, false);
-	input_sync(input_dev);
+	input_mt_report_pointer_emulation(data->input_dev,
+					  data->pdata->t19_num_keys);
+	input_sync(data->input_dev);
 }
 
-static void mxt_input_touchevent(struct mxt_data *data,
-				      struct mxt_message *message, int id)
+static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 {
 	struct device *dev = &data->client->dev;
-	u8 status = message->message[0];
 	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
 	int x;
 	int y;
 	int area;
 	int amplitude;
 
-	x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
-	y = (message->message[2] << 4) | ((message->message[3] & 0xf));
+	id = message[0] - data->T9_reportid_min;
+	status = message[1];
+	x = (message[2] << 4) | ((message[4] >> 4) & 0xf);
+	y = (message[3] << 4) | ((message[4] & 0xf));
 
 	/* Handle 10/12 bit switching */
 	if (data->max_x < 1024)
@@ -680,8 +717,8 @@ static void mxt_input_touchevent(struct mxt_data *data,
 	if (data->max_y < 1024)
 		y >>= 2;
 
-	area = message->message[4];
-	amplitude = message->message[5];
+	area = message[5];
+	amplitude = message[6];
 
 	dev_dbg(dev,
 		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
@@ -707,7 +744,7 @@ static void mxt_input_touchevent(struct mxt_data *data,
 		if (status & MXT_T9_RELEASE) {
 			input_mt_report_slot_state(input_dev,
 						   MT_TOOL_FINGER, 0);
-			mxt_input_sync(input_dev);
+			mxt_input_sync(data);
 		}
 
 		/* Touch active */
@@ -720,64 +757,179 @@ static void mxt_input_touchevent(struct mxt_data *data,
 		/* Touch no longer active, close out slot */
 		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
 	}
+
+	data->update_input = true;
+}
+
+static int mxt_proc_message(struct mxt_data *data, u8 *message)
+{
+	u8 report_id = message[0];
+
+	if (report_id == MXT_RPTID_NOMSG)
+		return 0;
+
+	if (report_id == data->T6_reportid) {
+		mxt_proc_t6_messages(data, message);
+	} else if (!data->input_dev) {
+		/*
+		 * Do not report events if input device
+		 * is not yet registered.
+		 */
+		mxt_dump_message(data, message);
+	} else if (report_id >= data->T9_reportid_min
+	    && report_id <= data->T9_reportid_max) {
+		mxt_proc_t9_message(data, message);
+	} else if (report_id == data->T19_reportid) {
+		mxt_input_button(data, message);
+		data->update_input = true;
+	} else {
+		mxt_dump_message(data, message);
+	}
+
+	return 1;
 }
 
-static u16 mxt_extract_T6_csum(const u8 *csum)
+static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
 {
-	return csum[0] | (csum[1] << 8) | (csum[2] << 16);
+	struct device *dev = &data->client->dev;
+	int ret;
+	int i;
+	u8 num_valid = 0;
+
+	/* Safety check for msg_buf */
+	if (count > data->max_reportid)
+		return -EINVAL;
+
+	/* Process remaining messages if necessary */
+	ret = __mxt_read_reg(data->client, data->T5_address,
+				data->T5_msg_size * count, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read %u messages (%d)\n", count, ret);
+		return ret;
+	}
+
+	for (i = 0;  i < count; i++) {
+		ret = mxt_proc_message(data,
+			data->msg_buf + data->T5_msg_size * i);
+
+		if (ret == 1)
+			num_valid++;
+	}
+
+	/* return number of messages read */
+	return num_valid;
 }
 
-static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
+static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
 {
-	u8 id = msg->reportid;
-	return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
+	struct device *dev = &data->client->dev;
+	int ret;
+	u8 count, num_left;
+
+	/* Read T44 and T5 together */
+	ret = __mxt_read_reg(data->client, data->T44_address,
+		data->T5_msg_size + 1, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
+		return IRQ_NONE;
+	}
+
+	count = data->msg_buf[0];
+
+	if (count == 0) {
+		dev_warn(dev, "Interrupt triggered but zero messages\n");
+		return IRQ_NONE;
+	} else if (count > data->max_reportid) {
+		dev_err(dev, "T44 count %d exceeded max report id\n", count);
+		count = data->max_reportid;
+	}
+
+	/* Process first message */
+	ret = mxt_proc_message(data, data->msg_buf + 1);
+	if (ret < 0) {
+		dev_warn(dev, "Unexpected invalid message\n");
+		return IRQ_NONE;
+	}
+
+	num_left = count - 1;
+
+	/* Process remaining messages if necessary */
+	if (num_left) {
+		ret = mxt_read_and_process_messages(data, num_left);
+		if (ret < 0)
+			goto end;
+		else if (ret != num_left)
+			dev_warn(dev, "Unexpected invalid message\n");
+	}
+
+end:
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	return IRQ_HANDLED;
 }
 
-static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
+static int mxt_process_messages_until_invalid(struct mxt_data *data)
 {
-	struct mxt_message message;
-	const u8 *payload = &message.message[0];
 	struct device *dev = &data->client->dev;
-	u8 reportid;
-	bool update_input = false;
-	u32 crc;
+	int count, read;
+	u8 tries = 2;
 
+	count = data->max_reportid;
+
+	/* Read messages until we force an invalid */
 	do {
-		if (mxt_read_message(data, &message)) {
-			dev_err(dev, "Failed to read message\n");
-			return IRQ_NONE;
-		}
+		read = mxt_read_and_process_messages(data, count);
+		if (read < count)
+			return 0;
+	} while (--tries);
 
-		reportid = message.reportid;
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
 
-		if (reportid == data->T6_reportid) {
-			u8 status = payload[0];
+	dev_err(dev, "CHG pin isn't cleared\n");
+	return -EBUSY;
+}
 
-			crc = mxt_extract_T6_csum(&payload[1]);
-			if (crc != data->config_crc) {
-				data->config_crc = crc;
-				complete(&data->crc_completion);
-			}
+static irqreturn_t mxt_process_messages(struct mxt_data *data)
+{
+	int total_handled, num_handled;
+	u8 count = data->last_message_count;
 
-			dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
-				status, data->config_crc);
-
-			if (status & MXT_T6_STATUS_RESET)
-				complete(&data->reset_completion);
-		} else if (mxt_is_T9_message(data, &message)) {
-			int id = reportid - data->T9_reportid_min;
-			mxt_input_touchevent(data, &message, id);
-			update_input = true;
-		} else if (message.reportid == data->T19_reportid) {
-			mxt_input_button(data, &message);
-			update_input = true;
-		} else {
-			mxt_dump_message(dev, &message);
-		}
-	} while (reportid != 0xff);
+	if (count < 1 || count > data->max_reportid)
+		count = 1;
 
-	if (update_input)
-		mxt_input_sync(data->input_dev);
+	/* include final invalid message */
+	total_handled = mxt_read_and_process_messages(data, count + 1);
+	if (total_handled < 0)
+		return IRQ_NONE;
+	/* if there were invalid messages, then we are done */
+	else if (total_handled <= count)
+		goto update_count;
+
+	/* keep reading two msgs until one is invalid or reportid limit */
+	do {
+		num_handled = mxt_read_and_process_messages(data, 2);
+		if (num_handled < 0)
+			return IRQ_NONE;
+
+		total_handled += num_handled;
+
+		if (num_handled < 2)
+			break;
+	} while (total_handled < data->num_touchids);
+
+update_count:
+	data->last_message_count = total_handled;
+
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
 
 	return IRQ_HANDLED;
 }
@@ -792,7 +944,14 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 		return IRQ_HANDLED;
 	}
 
-	return mxt_process_messages_until_invalid(data);
+	if (!data->object_table)
+		return IRQ_HANDLED;
+
+	if (data->T44_address) {
+		return mxt_process_messages_t44(data);
+	} else {
+		return mxt_process_messages(data);
+	}
 }
 
 static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
@@ -866,78 +1025,314 @@ static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
 	mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
 }
 
-static int mxt_check_reg_init(struct mxt_data *data)
+static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte)
+{
+	static const unsigned int crcpoly = 0x80001B;
+	u32 result;
+	u32 data_word;
+
+	data_word = (secondbyte << 8) | firstbyte;
+	result = ((*crc << 1) ^ data_word);
+
+	if (result & 0x1000000)
+		result ^= crcpoly;
+
+	*crc = result;
+}
+
+static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
+{
+	u32 crc = 0;
+	u8 *ptr = base + start_off;
+	u8 *last_val = base + end_off - 1;
+
+	if (end_off < start_off)
+		return -EINVAL;
+
+	while (ptr < last_val) {
+		mxt_calc_crc24(&crc, *ptr, *(ptr + 1));
+		ptr += 2;
+	}
+
+	/* if len is odd, fill the last byte with 0 */
+	if (ptr == last_val)
+		mxt_calc_crc24(&crc, *ptr, 0);
+
+	/* Mask to 24-bit */
+	crc &= 0x00FFFFFF;
+
+	return crc;
+}
+
+/*
+ * mxt_update_cfg - download configuration to chip
+ *
+ * Atmel Raw Config File Format
+ *
+ * The first four lines of the raw config file contain:
+ *  1) Version
+ *  2) Chip ID Information (first 7 bytes of device memory)
+ *  3) Chip Information Block 24-bit CRC Checksum
+ *  4) Chip Configuration 24-bit CRC Checksum
+ *
+ * The rest of the file consists of one line per object instance:
+ *   <TYPE> <INSTANCE> <SIZE> <CONTENTS>
+ *
+ *   <TYPE> - 2-byte object type as hex
+ *   <INSTANCE> - 2-byte object instance number as hex
+ *   <SIZE> - 2-byte object size as hex
+ *   <CONTENTS> - array of <SIZE> 1-byte hex values
+ */
+static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
 {
-	const struct mxt_platform_data *pdata = data->pdata;
-	struct mxt_object *object;
 	struct device *dev = &data->client->dev;
-	int index = 0;
-	int i, size;
+	struct mxt_info cfg_info;
+	struct mxt_object *object;
 	int ret;
+	int offset;
+	int data_pos;
+	int byte_offset;
+	int i;
+	int cfg_start_ofs;
+	u32 info_crc, config_crc, calculated_crc;
+	u8 *config_mem;
+	size_t config_mem_size;
+	unsigned int type, instance, size;
+	u8 val;
+	u16 reg;
 
-	if (!pdata->config) {
-		dev_dbg(dev, "No cfg data defined, skipping reg init\n");
-		return 0;
+	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
+
+	if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
+		dev_err(dev, "Unrecognised config file\n");
+		ret = -EINVAL;
+		goto release;
 	}
 
-	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
+	data_pos = strlen(MXT_CFG_MAGIC);
+
+	/* Load information block and check */
+	for (i = 0; i < sizeof(struct mxt_info); i++) {
+		ret = sscanf(cfg->data + data_pos, "%hhx%n",
+			     (unsigned char *)&cfg_info + i,
+			     &offset);
+		if (ret != 1) {
+			dev_err(dev, "Bad format\n");
+			ret = -EINVAL;
+			goto release;
+		}
 
-	if (data->config_crc == pdata->config_crc) {
-		dev_info(dev, "Config CRC 0x%06X: OK\n", data->config_crc);
-		return 0;
+		data_pos += offset;
 	}
 
-	dev_info(dev, "Config CRC 0x%06X: does not match 0x%06X\n",
-		 data->config_crc, pdata->config_crc);
+	if (cfg_info.family_id != data->info.family_id) {
+		dev_err(dev, "Family ID mismatch!\n");
+		ret = -EINVAL;
+		goto release;
+	}
 
-	for (i = 0; i < data->info.object_num; i++) {
-		object = data->object_table + i;
+	if (cfg_info.variant_id != data->info.variant_id) {
+		dev_err(dev, "Variant ID mismatch!\n");
+		ret = -EINVAL;
+		goto release;
+	}
+
+	/* Read CRCs */
+	ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Info CRC\n");
+		ret = -EINVAL;
+		goto release;
+	}
+	data_pos += offset;
 
-		if (!mxt_object_writable(object->type))
+	ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Config CRC\n");
+		ret = -EINVAL;
+		goto release;
+	}
+	data_pos += offset;
+
+	/*
+	 * The Info Block CRC is calculated over mxt_info and the object
+	 * table. If it does not match then we are trying to load the
+	 * configuration from a different chip or firmware version, so
+	 * the configuration CRC is invalid anyway.
+	 */
+	if (info_crc == data->info_crc) {
+		if (config_crc == 0 || data->config_crc == 0) {
+			dev_info(dev, "CRC zero, attempting to apply config\n");
+		} else if (config_crc == data->config_crc) {
+			dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+				 data->config_crc);
+			ret = 0;
+			goto release;
+		} else {
+			dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+				 data->config_crc, config_crc);
+		}
+	} else {
+		dev_warn(dev,
+			 "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+			 data->info_crc, info_crc);
+	}
+
+	/* Malloc memory to store configuration */
+	cfg_start_ofs = MXT_OBJECT_START +
+			data->info.object_num * sizeof(struct mxt_object) +
+			MXT_INFO_CHECKSUM_SIZE;
+	config_mem_size = data->mem_size - cfg_start_ofs;
+	config_mem = kzalloc(config_mem_size, GFP_KERNEL);
+	if (!config_mem) {
+		dev_err(dev, "Failed to allocate memory\n");
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	while (data_pos < cfg->size) {
+		/* Read type, instance, length */
+		ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
+			     &type, &instance, &size, &offset);
+		if (ret == 0) {
+			/* EOF */
+			break;
+		} else if (ret != 3) {
+			dev_err(dev, "Bad format: failed to parse object\n");
+			ret = -EINVAL;
+			goto release_mem;
+		}
+		data_pos += offset;
+
+		object = mxt_get_object(data, type);
+		if (!object) {
+			/* Skip object */
+			for (i = 0; i < size; i++) {
+				ret = sscanf(cfg->data + data_pos, "%hhx%n",
+					     &val,
+					     &offset);
+				data_pos += offset;
+			}
 			continue;
+		}
 
-		size = mxt_obj_size(object) * mxt_obj_instances(object);
-		if (index + size > pdata->config_length) {
-			dev_err(dev, "Not enough config data!\n");
-			return -EINVAL;
+		if (size > mxt_obj_size(object)) {
+			/*
+			 * Either we are in fallback mode due to wrong
+			 * config or config from a later fw version,
+			 * or the file is corrupt or hand-edited.
+			 */
+			dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
+				 size - mxt_obj_size(object), type);
+		} else if (mxt_obj_size(object) > size) {
+			/*
+			 * If firmware is upgraded, new bytes may be added to
+			 * end of objects. It is generally forward compatible
+			 * to zero these bytes - previous behaviour will be
+			 * retained. However this does invalidate the CRC and
+			 * will force fallback mode until the configuration is
+			 * updated. We warn here but do nothing else - the
+			 * malloc has zeroed the entire configuration.
+			 */
+			dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
+				 mxt_obj_size(object) - size, type);
 		}
 
-		ret = __mxt_write_reg(data->client, object->start_address,
-				size, &pdata->config[index]);
-		if (ret)
-			return ret;
-		index += size;
+		if (instance >= mxt_obj_instances(object)) {
+			dev_err(dev, "Object instances exceeded!\n");
+			ret = -EINVAL;
+			goto release_mem;
+		}
+
+		reg = object->start_address + mxt_obj_size(object) * instance;
+
+		for (i = 0; i < size; i++) {
+			ret = sscanf(cfg->data + data_pos, "%hhx%n",
+				     &val,
+				     &offset);
+			if (ret != 1) {
+				dev_err(dev, "Bad format in T%d\n", type);
+				ret = -EINVAL;
+				goto release_mem;
+			}
+			data_pos += offset;
+
+			if (i > mxt_obj_size(object))
+				continue;
+
+			byte_offset = reg + i - cfg_start_ofs;
+
+			if ((byte_offset >= 0)
+			    && (byte_offset <= config_mem_size)) {
+				*(config_mem + byte_offset) = val;
+			} else {
+				dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
+					reg, object->type, byte_offset);
+				ret = -EINVAL;
+				goto release_mem;
+			}
+		}
+	}
+
+	/* Calculate crc of the received configs (not the raw config file) */
+	if (data->T7_address < cfg_start_ofs) {
+		dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n",
+			data->T7_address, cfg_start_ofs);
+		ret = 0;
+		goto release_mem;
+	}
+
+	calculated_crc = mxt_calculate_crc(config_mem,
+					   data->T7_address - cfg_start_ofs,
+					   config_mem_size);
+
+	if (config_crc > 0 && (config_crc != calculated_crc))
+		dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
+			 calculated_crc, config_crc);
+
+	/* Write configuration as blocks */
+	byte_offset = 0;
+	while (byte_offset < config_mem_size) {
+		size = config_mem_size - byte_offset;
+
+		if (size > MXT_MAX_BLOCK_WRITE)
+			size = MXT_MAX_BLOCK_WRITE;
+
+		ret = __mxt_write_reg(data->client,
+				      cfg_start_ofs + byte_offset,
+				      size, config_mem + byte_offset);
+		if (ret != 0) {
+			dev_err(dev, "Config write error, ret=%d\n", ret);
+			goto release_mem;
+		}
+
+		byte_offset += size;
 	}
 
 	mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
 
 	ret = mxt_soft_reset(data);
 	if (ret)
-		return ret;
+		goto release_mem;
 
 	dev_info(dev, "Config successfully updated\n");
 
-	return 0;
+release_mem:
+	kfree(config_mem);
+release:
+	release_firmware(cfg);
+	return ret;
 }
 
-static int mxt_make_highchg(struct mxt_data *data)
+static int mxt_acquire_irq(struct mxt_data *data)
 {
-	struct device *dev = &data->client->dev;
-	struct mxt_message message;
-	int count = 10;
 	int error;
 
-	/* Read dummy message to make high CHG pin */
-	do {
-		error = mxt_read_message(data, &message);
-		if (error)
-			return error;
-	} while (message.reportid != 0xff && --count);
+	enable_irq(data->irq);
 
-	if (!count) {
-		dev_err(dev, "CHG pin isn't cleared\n");
-		return -EBUSY;
-	}
+	error = mxt_process_messages_until_invalid(data);
+	if (error)
+		return error;
 
 	return 0;
 }
@@ -956,24 +1351,55 @@ static int mxt_get_info(struct mxt_data *data)
 	return 0;
 }
 
+static void mxt_free_object_table(struct mxt_data *data)
+{
+	input_unregister_device(data->input_dev);
+	data->input_dev = NULL;
+
+	kfree(data->object_table);
+	data->object_table = NULL;
+	kfree(data->msg_buf);
+	data->msg_buf = NULL;
+	data->T5_address = 0;
+	data->T5_msg_size = 0;
+	data->T6_reportid = 0;
+	data->T7_address = 0;
+	data->T9_reportid_min = 0;
+	data->T9_reportid_max = 0;
+	data->T19_reportid = 0;
+	data->T44_address = 0;
+	data->max_reportid = 0;
+}
+
 static int mxt_get_object_table(struct mxt_data *data)
 {
 	struct i2c_client *client = data->client;
 	size_t table_size;
+	struct mxt_object *object_table;
 	int error;
 	int i;
 	u8 reportid;
+	u16 end_address;
 
 	table_size = data->info.object_num * sizeof(struct mxt_object);
+	object_table = kzalloc(table_size, GFP_KERNEL);
+	if (!object_table) {
+		dev_err(&data->client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
 	error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
-			data->object_table);
-	if (error)
+			object_table);
+	if (error) {
+		kfree(object_table);
 		return error;
+	}
 
 	/* Valid Report IDs start counting from 1 */
 	reportid = 1;
+	data->mem_size = 0;
 	for (i = 0; i < data->info.object_num; i++) {
-		struct mxt_object *object = data->object_table + i;
+		struct mxt_object *object = object_table + i;
 		u8 min_id, max_id;
 
 		le16_to_cpus(&object->start_address);
@@ -995,31 +1421,71 @@ static int mxt_get_object_table(struct mxt_data *data)
 			min_id, max_id);
 
 		switch (object->type) {
+		case MXT_GEN_MESSAGE_T5:
+			if (data->info.family_id == 0x80) {
+				/*
+				 * On mXT224 read and discard unused CRC byte
+				 * otherwise DMA reads are misaligned
+				 */
+				data->T5_msg_size = mxt_obj_size(object);
+			} else {
+				/* CRC not enabled, so skip last byte */
+				data->T5_msg_size = mxt_obj_size(object) - 1;
+			}
+			data->T5_address = object->start_address;
 		case MXT_GEN_COMMAND_T6:
 			data->T6_reportid = min_id;
 			data->T6_address = object->start_address;
 			break;
+		case MXT_GEN_POWER_T7:
+			data->T7_address = object->start_address;
+			break;
 		case MXT_TOUCH_MULTI_T9:
 			data->T9_reportid_min = min_id;
 			data->T9_reportid_max = max_id;
+			data->num_touchids = object->num_report_ids
+						* mxt_obj_instances(object);
+			break;
+		case MXT_SPT_MESSAGECOUNT_T44:
+			data->T44_address = object->start_address;
 			break;
 		case MXT_SPT_GPIOPWM_T19:
 			data->T19_reportid = min_id;
 			break;
 		}
+
+		end_address = object->start_address
+			+ mxt_obj_size(object) * mxt_obj_instances(object) - 1;
+
+		if (end_address >= data->mem_size)
+			data->mem_size = end_address + 1;
+	}
+
+	/* Store maximum reportid */
+	data->max_reportid = reportid;
+
+	/* If T44 exists, T5 position has to be directly after */
+	if (data->T44_address && (data->T5_address != data->T44_address + 1)) {
+		dev_err(&client->dev, "Invalid T44 position\n");
+		error = -EINVAL;
+		goto free_object_table;
+	}
+
+	data->msg_buf = kcalloc(data->max_reportid,
+				data->T5_msg_size, GFP_KERNEL);
+	if (!data->msg_buf) {
+		dev_err(&client->dev, "Failed to allocate message buffer\n");
+		error = -ENOMEM;
+		goto free_object_table;
 	}
 
+	data->object_table = object_table;
+
 	return 0;
-}
 
-static void mxt_free_object_table(struct mxt_data *data)
-{
-	kfree(data->object_table);
-	data->object_table = NULL;
-	data->T6_reportid = 0;
-	data->T9_reportid_min = 0;
-	data->T9_reportid_max = 0;
-	data->T19_reportid = 0;
+free_object_table:
+	mxt_free_object_table(data);
+	return error;
 }
 
 static int mxt_read_t9_resolution(struct mxt_data *data)
@@ -1070,55 +1536,255 @@ static int mxt_read_t9_resolution(struct mxt_data *data)
 	return 0;
 }
 
+static int mxt_input_open(struct input_dev *dev);
+static void mxt_input_close(struct input_dev *dev);
+
+static int mxt_initialize_t9_input_device(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	const struct mxt_platform_data *pdata = data->pdata;
+	struct input_dev *input_dev;
+	int error;
+	unsigned int num_mt_slots;
+	unsigned int mt_flags = 0;
+	int i;
+
+	error = mxt_read_t9_resolution(data);
+	if (error)
+		dev_warn(dev, "Failed to initialize T9 resolution\n");
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "Atmel maXTouch Touchscreen";
+	input_dev->phys = data->phys;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = dev;
+	input_dev->open = mxt_input_open;
+	input_dev->close = mxt_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	if (pdata->t19_num_keys) {
+		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+		for (i = 0; i < pdata->t19_num_keys; i++)
+			if (pdata->t19_keymap[i] != KEY_RESERVED)
+				input_set_capability(input_dev, EV_KEY,
+						     pdata->t19_keymap[i]);
+
+		mt_flags |= INPUT_MT_POINTER;
+
+		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+				  MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+				  MXT_PIXELS_PER_MM);
+
+		input_dev->name = "Atmel maXTouch Touchpad";
+	}
+
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X,
+			     0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			     0, data->max_y, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+			     0, 255, 0, 0);
+
+	/* For multi touch */
+	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
+	if (error) {
+		dev_err(dev, "Error %d initialising slots\n", error);
+		goto err_free_mem;
+	}
+
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, MXT_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, data->max_y, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+			     0, 255, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(dev, "Error %d registering input device\n", error);
+		goto err_free_mem;
+	}
+
+	data->input_dev = input_dev;
+
+	return 0;
+
+err_free_mem:
+	input_free_device(input_dev);
+	return error;
+}
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg);
+
+static void mxt_config_cb(const struct firmware *cfg, void *ctx)
+{
+	mxt_configure_objects(ctx, cfg);
+}
+
 static int mxt_initialize(struct mxt_data *data)
 {
 	struct i2c_client *client = data->client;
-	struct mxt_info *info = &data->info;
 	int error;
+	bool alt_bootloader_addr = false;
+	bool retry = false;
 
+retry_info:
 	error = mxt_get_info(data);
-	if (error)
-		return error;
+	if (error) {
+retry_bootloader:
+		error = mxt_probe_bootloader(data, alt_bootloader_addr);
+		if (error) {
+			if (alt_bootloader_addr) {
+				/* Chip is not in appmode or bootloader mode */
+				return error;
+			}
 
-	data->object_table = kcalloc(info->object_num,
-				     sizeof(struct mxt_object),
-				     GFP_KERNEL);
-	if (!data->object_table) {
-		dev_err(&client->dev, "Failed to allocate memory\n");
-		return -ENOMEM;
+			dev_info(&client->dev, "Trying alternate bootloader address\n");
+			alt_bootloader_addr = true;
+			goto retry_bootloader;
+		} else {
+			if (retry) {
+				dev_err(&client->dev, "Could not recover from bootloader mode\n");
+				/*
+				 * We can reflash from this state, so do not
+				 * abort init
+				 */
+				data->in_bootloader = true;
+				return 0;
+			}
+
+			/* Attempt to exit bootloader into app mode */
+			mxt_send_bootloader_cmd(data, false);
+			msleep(MXT_FW_RESET_TIME);
+			retry = true;
+			goto retry_info;
+		}
 	}
 
 	/* Get object table information */
 	error = mxt_get_object_table(data);
 	if (error) {
 		dev_err(&client->dev, "Error %d reading object table\n", error);
-		goto err_free_object_table;
+		return error;
 	}
 
-	/* Check register init values */
-	error = mxt_check_reg_init(data);
-	if (error) {
-		dev_err(&client->dev, "Error %d initializing configuration\n",
-			error);
+	mxt_acquire_irq(data);
+	if (error)
 		goto err_free_object_table;
+
+	request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
+				&data->client->dev, GFP_KERNEL, data,
+				mxt_config_cb);
+
+	return 0;
+
+err_free_object_table:
+	mxt_free_object_table(data);
+	return error;
+}
+
+static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	struct t7_config *new_config;
+	struct t7_config deepsleep = { .active = 0, .idle = 0 };
+
+	if (sleep == MXT_POWER_CFG_DEEPSLEEP)
+		new_config = &deepsleep;
+	else
+		new_config = &data->t7_cfg;
+
+	error = __mxt_write_reg(data->client, data->T7_address,
+				sizeof(data->t7_cfg), new_config);
+	if (error)
+		return error;
+
+	dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
+		new_config->active, new_config->idle);
+
+	return 0;
+}
+
+static int mxt_init_t7_power_cfg(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	bool retry = false;
+
+recheck:
+	error = __mxt_read_reg(data->client, data->T7_address,
+				sizeof(data->t7_cfg), &data->t7_cfg);
+	if (error)
+		return error;
+
+	if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
+		if (!retry) {
+			dev_dbg(dev, "T7 cfg zero, resetting\n");
+			mxt_soft_reset(data);
+			retry = true;
+			goto recheck;
+		} else {
+			dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
+			data->t7_cfg.active = 20;
+			data->t7_cfg.idle = 100;
+			return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+		}
 	}
 
-	error = mxt_read_t9_resolution(data);
+	dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
+		data->t7_cfg.active, data->t7_cfg.idle);
+	return 0;
+}
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_info *info = &data->info;
+	int error;
+
+	if (cfg) {
+		error = mxt_update_cfg(data, cfg);
+		if (error)
+			dev_warn(dev, "Error %d updating config\n", error);
+	}
+
+	error = mxt_init_t7_power_cfg(data);
 	if (error) {
-		dev_err(&client->dev, "Failed to initialize T9 resolution\n");
-		goto err_free_object_table;
+		dev_err(dev, "Failed to initialize power cfg\n");
+		return error;
 	}
 
-	dev_info(&client->dev,
+	error = mxt_initialize_t9_input_device(data);
+	if (error)
+		return error;
+
+	dev_info(dev,
 		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
 		 info->family_id, info->variant_id, info->version >> 4,
 		 info->version & 0xf, info->build, info->object_num);
 
 	return 0;
-
-err_free_object_table:
-	mxt_free_object_table(data);
-	return error;
 }
 
 /* Firmware Version is returned as Major.Minor.Build */
@@ -1246,30 +1912,45 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 	if (ret)
 		goto release_firmware;
 
-	ret = mxt_lookup_bootloader_address(data);
-	if (ret)
-		goto release_firmware;
+	if (!data->in_bootloader) {
+		/* Change to the bootloader mode */
+		data->in_bootloader = true;
 
-	/* Change to the bootloader mode */
-	data->in_bootloader = true;
+		ret = mxt_t6_command(data, MXT_COMMAND_RESET,
+				     MXT_BOOT_VALUE, false);
+		if (ret)
+			goto release_firmware;
 
-	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_BOOT_VALUE, false);
-	if (ret)
-		goto release_firmware;
+		msleep(MXT_RESET_TIME);
 
-	msleep(MXT_RESET_TIME);
+		/* Do not need to scan since we know family ID */
+		ret = mxt_lookup_bootloader_address(data, 0);
+		if (ret)
+			goto release_firmware;
+	} else {
+		enable_irq(data->irq);
+	}
 
+	mxt_free_object_table(data);
 	reinit_completion(&data->bl_completion);
 
-	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD);
-	if (ret)
-		goto disable_irq;
+	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
+	if (ret) {
+		/* Bootloader may still be unlocked from previous attempt */
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
+		if (ret)
+			goto disable_irq;
+	} else {
+		dev_info(dev, "Unlocking bootloader\n");
 
-	/* Unlock bootloader */
-	mxt_unlock_bootloader(data);
+		/* Unlock bootloader */
+		ret = mxt_send_bootloader_cmd(data, true);
+		if (ret)
+			goto disable_irq;
+	}
 
 	while (pos < fw->size) {
-		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA);
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
 		if (ret)
 			goto disable_irq;
 
@@ -1283,7 +1964,7 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		if (ret)
 			goto disable_irq;
 
-		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS);
+		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
 		if (ret) {
 			retry++;
 
@@ -1343,13 +2024,7 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	} else {
 		dev_info(dev, "The firmware update succeeded\n");
 
-		mxt_free_object_table(data);
-
-		mxt_initialize(data);
-
-		enable_irq(data->irq);
-
-		error = mxt_make_highchg(data);
+		error = mxt_initialize(data);
 		if (error)
 			return error;
 	}
@@ -1376,16 +2051,15 @@ static const struct attribute_group mxt_attr_group = {
 
 static void mxt_start(struct mxt_data *data)
 {
-	/* Touch enable */
-	mxt_write_object(data,
-			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
+	mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+
+	/* Recalibrate since chip has been in deep sleep */
+	mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
 }
 
 static void mxt_stop(struct mxt_data *data)
 {
-	/* Touch disable */
-	mxt_write_object(data,
-			MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
+	mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
 }
 
 static int mxt_input_open(struct input_dev *dev)
@@ -1404,138 +2078,112 @@ static void mxt_input_close(struct input_dev *dev)
 	mxt_stop(data);
 }
 
-static int mxt_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
+#ifdef CONFIG_OF
+static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+{
+	struct mxt_platform_data *pdata;
+	u32 *keymap;
+	u32 keycode;
+	int proplen, i, ret;
+
+	if (!client->dev.of_node)
+		return ERR_PTR(-ENODEV);
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_find_property(client->dev.of_node, "linux,gpio-keymap",
+			     &proplen)) {
+		pdata->t19_num_keys = proplen / sizeof(u32);
+
+		keymap = devm_kzalloc(&client->dev,
+				pdata->t19_num_keys * sizeof(keymap[0]),
+				GFP_KERNEL);
+		if (!keymap)
+			return ERR_PTR(-ENOMEM);
+
+		for (i = 0; i < pdata->t19_num_keys; i++) {
+			ret = of_property_read_u32_index(client->dev.of_node,
+					"linux,gpio-keymap", i, &keycode);
+			if (ret)
+				keycode = KEY_RESERVED;
+
+			keymap[i] = keycode;
+		}
+
+		pdata->t19_keymap = keymap;
+	}
+
+	return pdata;
+}
+#else
+static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+{
+	dev_dbg(&client->dev, "No platform data specified\n");
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
-	const struct mxt_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct mxt_data *data;
-	struct input_dev *input_dev;
+	const struct mxt_platform_data *pdata;
 	int error;
-	unsigned int num_mt_slots;
-	unsigned int mt_flags = 0;
-	int i;
 
-	if (!pdata)
-		return -EINVAL;
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata) {
+		pdata = mxt_parse_dt(client);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
 
 	data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!data || !input_dev) {
+	if (!data) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
-		error = -ENOMEM;
-		goto err_free_mem;
+		return -ENOMEM;
 	}
 
-	input_dev->name = "Atmel maXTouch Touchscreen";
 	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
 		 client->adapter->nr, client->addr);
 
-	input_dev->phys = data->phys;
-
-	input_dev->id.bustype = BUS_I2C;
-	input_dev->dev.parent = &client->dev;
-	input_dev->open = mxt_input_open;
-	input_dev->close = mxt_input_close;
-
 	data->client = client;
-	data->input_dev = input_dev;
 	data->pdata = pdata;
 	data->irq = client->irq;
+	i2c_set_clientdata(client, data);
 
 	init_completion(&data->bl_completion);
 	init_completion(&data->reset_completion);
 	init_completion(&data->crc_completion);
 
-	error = mxt_initialize(data);
-	if (error)
-		goto err_free_mem;
-
-	__set_bit(EV_ABS, input_dev->evbit);
-	__set_bit(EV_KEY, input_dev->evbit);
-	__set_bit(BTN_TOUCH, input_dev->keybit);
-
-	if (pdata->t19_num_keys) {
-		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
-
-		for (i = 0; i < pdata->t19_num_keys; i++)
-			if (pdata->t19_keymap[i] != KEY_RESERVED)
-				input_set_capability(input_dev, EV_KEY,
-						     pdata->t19_keymap[i]);
-
-		mt_flags |= INPUT_MT_POINTER;
-
-		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_MT_POSITION_X,
-				  MXT_PIXELS_PER_MM);
-		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
-				  MXT_PIXELS_PER_MM);
-
-		input_dev->name = "Atmel maXTouch Touchpad";
-	}
-
-	/* For single touch */
-	input_set_abs_params(input_dev, ABS_X,
-			     0, data->max_x, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y,
-			     0, data->max_y, 0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE,
-			     0, 255, 0, 0);
-
-	/* For multi touch */
-	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
-	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
-	if (error)
-		goto err_free_object;
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
-			     0, MXT_MAX_AREA, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
-			     0, data->max_x, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
-			     0, data->max_y, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_PRESSURE,
-			     0, 255, 0, 0);
-
-	input_set_drvdata(input_dev, data);
-	i2c_set_clientdata(client, data);
-
 	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
 				     pdata->irqflags | IRQF_ONESHOT,
 				     client->name, data);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_free_object;
+		goto err_free_mem;
 	}
 
-	error = mxt_make_highchg(data);
-	if (error)
-		goto err_free_irq;
+	disable_irq(client->irq);
 
-	error = input_register_device(input_dev);
-	if (error) {
-		dev_err(&client->dev, "Error %d registering input device\n",
-			error);
+	error = mxt_initialize(data);
+	if (error)
 		goto err_free_irq;
-	}
 
 	error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
 	if (error) {
 		dev_err(&client->dev, "Failure %d creating sysfs group\n",
 			error);
-		goto err_unregister_device;
+		goto err_free_object;
 	}
 
 	return 0;
 
-err_unregister_device:
-	input_unregister_device(input_dev);
-	input_dev = NULL;
+err_free_object:
+	mxt_free_object_table(data);
 err_free_irq:
 	free_irq(client->irq, data);
-err_free_object:
-	kfree(data->object_table);
 err_free_mem:
-	input_free_device(input_dev);
 	kfree(data);
 	return error;
 }
@@ -1547,7 +2195,7 @@ static int mxt_remove(struct i2c_client *client)
 	sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
 	free_irq(data->irq, data);
 	input_unregister_device(data->input_dev);
-	kfree(data->object_table);
+	mxt_free_object_table(data);
 	kfree(data);
 
 	return 0;
@@ -1576,8 +2224,6 @@ static int mxt_resume(struct device *dev)
 	struct mxt_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
-	mxt_soft_reset(data);
-
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users)
@@ -1591,6 +2237,12 @@ static int mxt_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
 
+static const struct of_device_id mxt_of_match[] = {
+	{ .compatible = "atmel,maxtouch", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mxt_of_match);
+
 static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
@@ -1604,6 +2256,7 @@ static struct i2c_driver mxt_driver = {
 	.driver = {
 		.name	= "atmel_mxt_ts",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(mxt_of_match),
 		.pm	= &mxt_pm_ops,
 	},
 	.probe		= mxt_probe,
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d4f33992ad8c..5a6d50c004d7 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -733,8 +733,7 @@ edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
 static void
 edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
 {
-	if (tsdata->debug_dir)
-		debugfs_remove_recursive(tsdata->debug_dir);
+	debugfs_remove_recursive(tsdata->debug_dir);
 	kfree(tsdata->raw_buffer);
 }
 
diff --git a/drivers/input/touchscreen/ipaq-micro-ts.c b/drivers/input/touchscreen/ipaq-micro-ts.c
new file mode 100644
index 000000000000..62c8976e616f
--- /dev/null
+++ b/drivers/input/touchscreen/ipaq-micro-ts.c
@@ -0,0 +1,166 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, touchscreen subdevice
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Dmitry Artamonow <mad_soft@inbox.ru>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ */
+
+#include <asm/byteorder.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct touchscreen_data {
+	struct input_dev *input;
+	struct ipaq_micro *micro;
+};
+
+static void micro_ts_receive(void *data, int len, unsigned char *msg)
+{
+	struct touchscreen_data *ts = data;
+
+	if (len == 4) {
+		input_report_abs(ts->input, ABS_X,
+				 be16_to_cpup((__be16 *) &msg[2]));
+		input_report_abs(ts->input, ABS_Y,
+				 be16_to_cpup((__be16 *) &msg[0]));
+		input_report_key(ts->input, BTN_TOUCH, 1);
+		input_sync(ts->input);
+	} else if (len == 0) {
+		input_report_abs(ts->input, ABS_X, 0);
+		input_report_abs(ts->input, ABS_Y, 0);
+		input_report_key(ts->input, BTN_TOUCH, 0);
+		input_sync(ts->input);
+	}
+}
+
+static void micro_ts_toggle_receive(struct touchscreen_data *ts, bool enable)
+{
+	struct ipaq_micro *micro = ts->micro;
+
+	spin_lock_irq(&micro->lock);
+
+	if (enable) {
+		micro->ts = micro_ts_receive;
+		micro->ts_data = ts;
+	} else {
+		micro->ts = NULL;
+		micro->ts_data = NULL;
+	}
+
+	spin_unlock_irq(&ts->micro->lock);
+}
+
+static int micro_ts_open(struct input_dev *input)
+{
+	struct touchscreen_data *ts = input_get_drvdata(input);
+
+	micro_ts_toggle_receive(ts, true);
+
+	return 0;
+}
+
+static void micro_ts_close(struct input_dev *input)
+{
+	struct touchscreen_data *ts = input_get_drvdata(input);
+
+	micro_ts_toggle_receive(ts, false);
+}
+
+static int micro_ts_probe(struct platform_device *pdev)
+{
+	struct ipaq_micro *micro = dev_get_drvdata(pdev->dev.parent);
+	struct touchscreen_data *ts;
+	int error;
+
+	ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->micro = micro;
+
+	ts->input = devm_input_allocate_device(&pdev->dev);
+	if (!ts->input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	ts->input->name = "ipaq micro ts";
+	ts->input->open = micro_ts_open;
+	ts->input->close = micro_ts_close;
+
+	input_set_drvdata(ts->input, ts);
+
+	input_set_capability(ts->input, EV_KEY, BTN_TOUCH);
+	input_set_capability(ts->input, EV_ABS, ABS_X);
+	input_set_capability(ts->input, EV_ABS, ABS_Y);
+	input_set_abs_params(ts->input, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(ts->input, ABS_Y, 0, 1023, 0, 0);
+
+	error = input_register_device(ts->input);
+	if (error) {
+		dev_err(&pdev->dev, "error registering touch input\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, ts);
+
+	dev_info(&pdev->dev, "iPAQ micro touchscreen\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int micro_ts_suspend(struct device *dev)
+{
+	struct touchscreen_data *ts = dev_get_drvdata(dev);
+
+	micro_ts_toggle_receive(ts, false);
+
+	return 0;
+}
+
+static int micro_ts_resume(struct device *dev)
+{
+	struct touchscreen_data *ts = dev_get_drvdata(dev);
+	struct input_dev *input = ts->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users)
+		micro_ts_toggle_receive(ts, true);
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops micro_ts_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(micro_ts_suspend, micro_ts_resume)
+};
+
+static struct platform_driver micro_ts_device_driver = {
+	.driver	= {
+		.name	= "ipaq-micro-ts",
+		.pm	= &micro_ts_dev_pm_ops,
+	},
+	.probe	= micro_ts_probe,
+};
+module_platform_driver(micro_ts_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro touchscreen");
+MODULE_ALIAS("platform:ipaq-micro-ts");
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 7324c5c0fb86..651ec71a5c68 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -36,22 +36,21 @@ struct jornada_ts {
 
 static void jornada720_ts_collect_data(struct jornada_ts *jornada_ts)
 {
+	/* 3 low word X samples */
+	jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY);
 
-    /* 3 low word X samples */
-    jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY);
-    jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY);
-    jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY);
+	/* 3 low word Y samples */
+	jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY);
 
-    /* 3 low word Y samples */
-    jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY);
-    jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY);
-    jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY);
+	/* combined x samples bits */
+	jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY);
 
-    /* combined x samples bits */
-    jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY);
-
-    /* combined y samples bits */
-    jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY);
+	/* combined y samples bits */
+	jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY);
 }
 
 static int jornada720_ts_average(int coords[4])
@@ -104,13 +103,13 @@ static int jornada720_ts_probe(struct platform_device *pdev)
 	struct input_dev *input_dev;
 	int error;
 
-	jornada_ts = kzalloc(sizeof(struct jornada_ts), GFP_KERNEL);
-	input_dev = input_allocate_device();
+	jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL);
+	if (!jornada_ts)
+		return -ENOMEM;
 
-	if (!jornada_ts || !input_dev) {
-		error = -ENOMEM;
-		goto fail1;
-	}
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, jornada_ts);
 
@@ -126,36 +125,18 @@ static int jornada720_ts_probe(struct platform_device *pdev)
 	input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
 	input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
 
-	error = request_irq(IRQ_GPIO9,
-			jornada720_ts_interrupt,
-			IRQF_TRIGGER_RISING,
-			"HP7XX Touchscreen driver", pdev);
+	error = devm_request_irq(&pdev->dev, IRQ_GPIO9,
+				 jornada720_ts_interrupt,
+				 IRQF_TRIGGER_RISING,
+				 "HP7XX Touchscreen driver", pdev);
 	if (error) {
-		printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n");
-		goto fail1;
+		dev_err(&pdev->dev, "HP7XX TS : Unable to acquire irq!\n");
+		return error;
 	}
 
 	error = input_register_device(jornada_ts->dev);
 	if (error)
-		goto fail2;
-
-	return 0;
-
- fail2:
-	free_irq(IRQ_GPIO9, pdev);
- fail1:
-	input_free_device(input_dev);
-	kfree(jornada_ts);
-	return error;
-}
-
-static int jornada720_ts_remove(struct platform_device *pdev)
-{
-	struct jornada_ts *jornada_ts = platform_get_drvdata(pdev);
-
-	free_irq(IRQ_GPIO9, pdev);
-	input_unregister_device(jornada_ts->dev);
-	kfree(jornada_ts);
+		return error;
 
 	return 0;
 }
@@ -165,7 +146,6 @@ MODULE_ALIAS("platform:jornada_ts");
 
 static struct platform_driver jornada720_ts_driver = {
 	.probe		= jornada720_ts_probe,
-	.remove		= jornada720_ts_remove,
 	.driver		= {
 		.name	= "jornada_ts",
 		.owner	= THIS_MODULE,
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index 00510a9836b3..8b47e1fecb25 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -248,8 +248,7 @@ static int mcs5000_ts_probe(struct i2c_client *client,
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int mcs5000_ts_suspend(struct device *dev)
+static int __maybe_unused mcs5000_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 
@@ -259,7 +258,7 @@ static int mcs5000_ts_suspend(struct device *dev)
 	return 0;
 }
 
-static int mcs5000_ts_resume(struct device *dev)
+static int __maybe_unused mcs5000_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
@@ -269,7 +268,6 @@ static int mcs5000_ts_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume);
 
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 19c6c0fdc94b..fc49c75317d1 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -23,22 +23,51 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/input/pixcir_ts.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+
+#define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
 
 struct pixcir_i2c_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
-	const struct pixcir_ts_platform_data *chip;
+	const struct pixcir_ts_platform_data *pdata;
 	bool running;
+	int max_fingers;	/* Max fingers supported in this instance */
+};
+
+struct pixcir_touch {
+	int x;
+	int y;
+	int id;
+};
+
+struct pixcir_report_data {
+	int num_touches;
+	struct pixcir_touch touches[PIXCIR_MAX_SLOTS];
 };
 
-static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
+static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
+			    struct pixcir_report_data *report)
 {
-	struct pixcir_i2c_ts_data *tsdata = data;
-	u8 rdbuf[10], wrbuf[1] = { 0 };
+	u8 rdbuf[2 + PIXCIR_MAX_SLOTS * 5];
+	u8 wrbuf[1] = { 0 };
+	u8 *bufptr;
 	u8 touch;
-	int ret;
+	int ret, i;
+	int readsize;
+	const struct pixcir_i2c_chip_data *chip = &tsdata->pdata->chip;
+
+	memset(report, 0, sizeof(struct pixcir_report_data));
+
+	i = chip->has_hw_ids ? 1 : 0;
+	readsize = 2 + tsdata->max_fingers * (4 + i);
+	if (readsize > sizeof(rdbuf))
+		readsize = sizeof(rdbuf);
 
 	ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
 	if (ret != sizeof(wrbuf)) {
@@ -48,7 +77,7 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
 		return;
 	}
 
-	ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf));
+	ret = i2c_master_recv(tsdata->client, rdbuf, readsize);
 	if (ret != sizeof(rdbuf)) {
 		dev_err(&tsdata->client->dev,
 			"%s: i2c_master_recv failed(), ret=%d\n",
@@ -56,45 +85,103 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
 		return;
 	}
 
-	touch = rdbuf[0];
-	if (touch) {
-		u16 posx1 = (rdbuf[3] << 8) | rdbuf[2];
-		u16 posy1 = (rdbuf[5] << 8) | rdbuf[4];
-		u16 posx2 = (rdbuf[7] << 8) | rdbuf[6];
-		u16 posy2 = (rdbuf[9] << 8) | rdbuf[8];
-
-		input_report_key(tsdata->input, BTN_TOUCH, 1);
-		input_report_abs(tsdata->input, ABS_X, posx1);
-		input_report_abs(tsdata->input, ABS_Y, posy1);
-
-		input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1);
-		input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1);
-		input_mt_sync(tsdata->input);
-
-		if (touch == 2) {
-			input_report_abs(tsdata->input,
-					 ABS_MT_POSITION_X, posx2);
-			input_report_abs(tsdata->input,
-					 ABS_MT_POSITION_Y, posy2);
-			input_mt_sync(tsdata->input);
+	touch = rdbuf[0] & 0x7;
+	if (touch > tsdata->max_fingers)
+		touch = tsdata->max_fingers;
+
+	report->num_touches = touch;
+	bufptr = &rdbuf[2];
+
+	for (i = 0; i < touch; i++) {
+		report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
+		report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
+
+		if (chip->has_hw_ids) {
+			report->touches[i].id = bufptr[4];
+			bufptr = bufptr + 5;
+		} else {
+			bufptr = bufptr + 4;
+		}
+	}
+}
+
+static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
+			     struct pixcir_report_data *report)
+{
+	struct input_mt_pos pos[PIXCIR_MAX_SLOTS];
+	int slots[PIXCIR_MAX_SLOTS];
+	struct pixcir_touch *touch;
+	int n, i, slot;
+	struct device *dev = &ts->client->dev;
+	const struct pixcir_i2c_chip_data *chip = &ts->pdata->chip;
+
+	n = report->num_touches;
+	if (n > PIXCIR_MAX_SLOTS)
+		n = PIXCIR_MAX_SLOTS;
+
+	if (!chip->has_hw_ids) {
+		for (i = 0; i < n; i++) {
+			touch = &report->touches[i];
+			pos[i].x = touch->x;
+			pos[i].y = touch->y;
+		}
+
+		input_mt_assign_slots(ts->input, slots, pos, n);
+	}
+
+	for (i = 0; i < n; i++) {
+		touch = &report->touches[i];
+
+		if (chip->has_hw_ids) {
+			slot = input_mt_get_slot_by_key(ts->input, touch->id);
+			if (slot < 0) {
+				dev_dbg(dev, "no free slot for id 0x%x\n",
+					touch->id);
+				continue;
+			}
+		} else {
+			slot = slots[i];
 		}
-	} else {
-		input_report_key(tsdata->input, BTN_TOUCH, 0);
+
+		input_mt_slot(ts->input, slot);
+		input_mt_report_slot_state(ts->input,
+					   MT_TOOL_FINGER, true);
+
+		input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x);
+		input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y);
+
+		dev_dbg(dev, "%d: slot %d, x %d, y %d\n",
+			i, slot, touch->x, touch->y);
 	}
 
-	input_sync(tsdata->input);
+	input_mt_sync_frame(ts->input);
+	input_sync(ts->input);
 }
 
 static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
 {
 	struct pixcir_i2c_ts_data *tsdata = dev_id;
-	const struct pixcir_ts_platform_data *pdata = tsdata->chip;
+	const struct pixcir_ts_platform_data *pdata = tsdata->pdata;
+	struct pixcir_report_data report;
 
 	while (tsdata->running) {
-		pixcir_ts_poscheck(tsdata);
-
-		if (gpio_get_value(pdata->gpio_attb))
+		/* parse packet */
+		pixcir_ts_parse(tsdata, &report);
+
+		/* report it */
+		pixcir_ts_report(tsdata, &report);
+
+		if (gpio_get_value(pdata->gpio_attb)) {
+			if (report.num_touches) {
+				/*
+				 * Last report with no finger up?
+				 * Do it now then.
+				 */
+				input_mt_sync_frame(tsdata->input);
+				input_sync(tsdata->input);
+			}
 			break;
+		}
 
 		msleep(20);
 	}
@@ -323,16 +410,69 @@ unlock:
 static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
 			 pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);
 
+#ifdef CONFIG_OF
+static const struct of_device_id pixcir_of_match[];
+
+static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
+{
+	struct pixcir_ts_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+	const struct of_device_id *match;
+
+	match = of_match_device(of_match_ptr(pixcir_of_match), dev);
+	if (!match)
+		return ERR_PTR(-EINVAL);
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data;
+
+	pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
+	/* gpio_attb validity is checked in probe */
+
+	if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) {
+		dev_err(dev, "Failed to get touchscreen-size-x property\n");
+		return ERR_PTR(-EINVAL);
+	}
+	pdata->x_max -= 1;
+
+	if (of_property_read_u32(np, "touchscreen-size-y", &pdata->y_max)) {
+		dev_err(dev, "Failed to get touchscreen-size-y property\n");
+		return ERR_PTR(-EINVAL);
+	}
+	pdata->y_max -= 1;
+
+	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
+		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
+
+	return pdata;
+}
+#else
+static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
 static int pixcir_i2c_ts_probe(struct i2c_client *client,
 					 const struct i2c_device_id *id)
 {
 	const struct pixcir_ts_platform_data *pdata =
 			dev_get_platdata(&client->dev);
 	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
 	struct pixcir_i2c_ts_data *tsdata;
 	struct input_dev *input;
 	int error;
 
+	if (np && !pdata) {
+		pdata = pixcir_parse_dt(dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
 	if (!pdata) {
 		dev_err(&client->dev, "platform data not defined\n");
 		return -EINVAL;
@@ -343,6 +483,11 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
+	if (!pdata->chip.max_fingers) {
+		dev_err(dev, "Invalid max_fingers in pdata\n");
+		return -EINVAL;
+	}
+
 	tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
 	if (!tsdata)
 		return -ENOMEM;
@@ -355,7 +500,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 
 	tsdata->client = client;
 	tsdata->input = input;
-	tsdata->chip = pdata;
+	tsdata->pdata = pdata;
 
 	input->name = client->name;
 	input->id.bustype = BUS_I2C;
@@ -371,6 +516,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
 	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
 
+	tsdata->max_fingers = tsdata->pdata->chip.max_fingers;
+	if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) {
+		tsdata->max_fingers = PIXCIR_MAX_SLOTS;
+		dev_info(dev, "Limiting maximum fingers to %d\n",
+			 tsdata->max_fingers);
+	}
+
+	error = input_mt_init_slots(input, tsdata->max_fingers,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(dev, "Error initializing Multi-Touch slots\n");
+		return error;
+	}
+
 	input_set_drvdata(input, tsdata);
 
 	error = devm_gpio_request_one(dev, pdata->gpio_attb,
@@ -419,15 +578,36 @@ static int pixcir_i2c_ts_remove(struct i2c_client *client)
 
 static const struct i2c_device_id pixcir_i2c_ts_id[] = {
 	{ "pixcir_ts", 0 },
+	{ "pixcir_tangoc", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id);
 
+#ifdef CONFIG_OF
+static const struct pixcir_i2c_chip_data pixcir_ts_data = {
+	.max_fingers = 2,
+	/* no hw id support */
+};
+
+static const struct pixcir_i2c_chip_data pixcir_tangoc_data = {
+	.max_fingers = 5,
+	.has_hw_ids = true,
+};
+
+static const struct of_device_id pixcir_of_match[] = {
+	{ .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data },
+	{ .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pixcir_of_match);
+#endif
+
 static struct i2c_driver pixcir_i2c_ts_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
 		.name	= "pixcir_ts",
 		.pm	= &pixcir_dev_pm_ops,
+		.of_match_table = of_match_ptr(pixcir_of_match),
 	},
 	.probe		= pixcir_i2c_ts_probe,
 	.remove		= pixcir_i2c_ts_remove,
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 19cb247dbb86..5a69ded9b53c 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -264,7 +264,7 @@ static int s3c2410ts_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	clk_enable(ts.clock);
+	clk_prepare_enable(ts.clock);
 	dev_dbg(dev, "got and enabled clocks\n");
 
 	ts.irq_tc = ret = platform_get_irq(pdev, 0);
@@ -369,7 +369,7 @@ static int s3c2410ts_remove(struct platform_device *pdev)
 	free_irq(ts.irq_tc, ts.input);
 	del_timer_sync(&touch_timer);
 
-	clk_disable(ts.clock);
+	clk_disable_unprepare(ts.clock);
 	clk_put(ts.clock);
 
 	input_unregister_device(ts.input);
diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
index feea85b52fa8..8ba48f5eff7b 100644
--- a/drivers/input/touchscreen/zforce_ts.c
+++ b/drivers/input/touchscreen/zforce_ts.c
@@ -29,6 +29,8 @@
 #include <linux/sysfs.h>
 #include <linux/input/mt.h>
 #include <linux/platform_data/zforce_ts.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 
@@ -117,6 +119,8 @@ struct zforce_ts {
 	const struct zforce_ts_platdata *pdata;
 	char			phys[32];
 
+	struct regulator	*reg_vdd;
+
 	bool			suspending;
 	bool			suspended;
 	bool			boot_complete;
@@ -690,6 +694,11 @@ static void zforce_reset(void *data)
 	struct zforce_ts *ts = data;
 
 	gpio_set_value(ts->pdata->gpio_rst, 0);
+
+	udelay(10);
+
+	if (!IS_ERR(ts->reg_vdd))
+		regulator_disable(ts->reg_vdd);
 }
 
 static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
@@ -765,10 +774,32 @@ static int zforce_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd");
+	if (IS_ERR(ts->reg_vdd)) {
+		ret = PTR_ERR(ts->reg_vdd);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+	} else {
+		ret = regulator_enable(ts->reg_vdd);
+		if (ret)
+			return ret;
+
+		/*
+		 * according to datasheet add 100us grace time after regular
+		 * regulator enable delay.
+		 */
+		udelay(100);
+	}
+
 	ret = devm_add_action(&client->dev, zforce_reset, ts);
 	if (ret) {
 		dev_err(&client->dev, "failed to register reset action, %d\n",
 			ret);
+
+		/* hereafter the regulator will be disabled by the action */
+		if (!IS_ERR(ts->reg_vdd))
+			regulator_disable(ts->reg_vdd);
+
 		return ret;
 	}