Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for ADC driven joysticks

 - a new Zintix touchscreen driver

 - enhancements to Intel SoC button array driver

 - support for F3A "function" in Synaptics RMI4 driver

 - assorted driver fixups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
  Input: Add MAINTAINERS entry for SiS i2c touch input driver
  Input: evdev - per-client waitgroups
  Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1
  Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2
  Input: synaptics-rmi4 - support bootloader v8 in f34v7
  Input: synaptics-rmi4 - add support for F3A
  Input: synaptics-rmi4 - rename f30_data to gpio_data
  Input: add zinitix touchscreen driver
  dt-bindings: input/touchscreen: add bindings for zinitix
  Input: joystick - add ADC attached joystick driver.
  dt-bindings: input: Add docs for ADC driven joystick
  Input: sun4i-ps2 - fix handling of platform_get_irq() error
  Input: twl4030_keypad - fix handling of platform_get_irq() error
  Input: omap4-keypad - fix handling of platform_get_irq() error
  Input: ep93xx_keypad - fix handling of platform_get_irq() error
  Input: stmfts - fix a & vs && typo
  Input: imx6ul_tsc - unify open/close and PM paths
  Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
  Input: elants_i2c - fix typo for an attribute to show calibration count
  Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information.
  ...

25 files changed, 1337 insertions, 160 deletions

diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index e494295d1c7b..95f90699d2b1 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -28,7 +28,6 @@
 struct evdev {
 	int open;
 	struct input_handle handle;
-	wait_queue_head_t wait;
 	struct evdev_client __rcu *grab;
 	struct list_head client_list;
 	spinlock_t client_lock; /* protects client_list */
@@ -43,6 +42,7 @@ struct evdev_client {
 	unsigned int tail;
 	unsigned int packet_head; /* [future] position of the first element of next packet */
 	spinlock_t buffer_lock; /* protects access to buffer, head and tail */
+	wait_queue_head_t wait;
 	struct fasync_struct *fasync;
 	struct evdev *evdev;
 	struct list_head node;
@@ -245,7 +245,6 @@ static void evdev_pass_values(struct evdev_client *client,
 			const struct input_value *vals, unsigned int count,
 			ktime_t *ev_time)
 {
-	struct evdev *evdev = client->evdev;
 	const struct input_value *v;
 	struct input_event event;
 	struct timespec64 ts;
@@ -282,7 +281,7 @@ static void evdev_pass_values(struct evdev_client *client,
 	spin_unlock(&client->buffer_lock);
 
 	if (wakeup)
-		wake_up_interruptible_poll(&evdev->wait,
+		wake_up_interruptible_poll(&client->wait,
 			EPOLLIN | EPOLLOUT | EPOLLRDNORM | EPOLLWRNORM);
 }
 
@@ -426,11 +425,11 @@ static void evdev_hangup(struct evdev *evdev)
 	struct evdev_client *client;
 
 	spin_lock(&evdev->client_lock);
-	list_for_each_entry(client, &evdev->client_list, node)
+	list_for_each_entry(client, &evdev->client_list, node) {
 		kill_fasync(&client->fasync, SIGIO, POLL_HUP);
+		wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR);
+	}
 	spin_unlock(&evdev->client_lock);
-
-	wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
 }
 
 static int evdev_release(struct inode *inode, struct file *file)
@@ -479,6 +478,7 @@ static int evdev_open(struct inode *inode, struct file *file)
 	if (!client)
 		return -ENOMEM;
 
+	init_waitqueue_head(&client->wait);
 	client->bufsize = bufsize;
 	spin_lock_init(&client->buffer_lock);
 	client->evdev = evdev;
@@ -595,7 +595,7 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
 			break;
 
 		if (!(file->f_flags & O_NONBLOCK)) {
-			error = wait_event_interruptible(evdev->wait,
+			error = wait_event_interruptible(client->wait,
 					client->packet_head != client->tail ||
 					!evdev->exist || client->revoked);
 			if (error)
@@ -613,7 +613,7 @@ static __poll_t evdev_poll(struct file *file, poll_table *wait)
 	struct evdev *evdev = client->evdev;
 	__poll_t mask;
 
-	poll_wait(file, &evdev->wait, wait);
+	poll_wait(file, &client->wait, wait);
 
 	if (evdev->exist && !client->revoked)
 		mask = EPOLLOUT | EPOLLWRNORM;
@@ -946,7 +946,7 @@ static int evdev_revoke(struct evdev *evdev, struct evdev_client *client,
 	client->revoked = true;
 	evdev_ungrab(evdev, client);
 	input_flush_device(&evdev->handle, file);
-	wake_up_interruptible_poll(&evdev->wait, EPOLLHUP | EPOLLERR);
+	wake_up_interruptible_poll(&client->wait, EPOLLHUP | EPOLLERR);
 
 	return 0;
 }
@@ -1358,7 +1358,6 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 	INIT_LIST_HEAD(&evdev->client_list);
 	spin_lock_init(&evdev->client_lock);
 	mutex_init(&evdev->mutex);
-	init_waitqueue_head(&evdev->wait);
 	evdev->exist = true;
 
 	dev_no = minor;
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index f699538bdac4..44fe6f2f063c 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -323,11 +323,14 @@ static int adjust_dual(int *begin, int step, int *end, int eq, int mu)
 	p = begin + step;
 	s = p == end ? f + 1 : *p;
 
-	for (; p != end; p += step)
-		if (*p < f)
-			s = f, f = *p;
-		else if (*p < s)
+	for (; p != end; p += step) {
+		if (*p < f) {
+			s = f;
+			f = *p;
+		} else if (*p < s) {
 			s = *p;
+		}
+	}
 
 	c = (f + s + 1) / 2;
 	if (c == 0 || (c > mu && (!eq || mu > 0)))
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index eb031b7a4866..b080f0cfb068 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -42,6 +42,16 @@ config JOYSTICK_A3D
 	  To compile this driver as a module, choose M here: the
 	  module will be called a3d.
 
+config JOYSTICK_ADC
+	tristate "Simple joystick connected over ADC"
+	depends on IIO
+	select IIO_BUFFER_CB
+	help
+	  Say Y here if you have a simple joystick connected over ADC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adc-joystick.
+
 config JOYSTICK_ADI
 	tristate "Logitech ADI digital joysticks and gamepads"
 	select GAMEPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 8656023f6ef5..58232b3057d3 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -6,6 +6,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
+obj-$(CONFIG_JOYSTICK_ADC)		+= adc-joystick.o
 obj-$(CONFIG_JOYSTICK_ADI)		+= adi.o
 obj-$(CONFIG_JOYSTICK_AMIGA)		+= amijoy.o
 obj-$(CONFIG_JOYSTICK_AS5011)		+= as5011.o
diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
new file mode 100644
index 000000000000..78ebca7d400a
--- /dev/null
+++ b/drivers/input/joystick/adc-joystick.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Input driver for joysticks connected over ADC.
+ * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu>
+ */
+#include <linux/ctype.h>
+#include <linux/input.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#include <asm/unaligned.h>
+
+struct adc_joystick_axis {
+	u32 code;
+	s32 range[2];
+	s32 fuzz;
+	s32 flat;
+};
+
+struct adc_joystick {
+	struct input_dev *input;
+	struct iio_cb_buffer *buffer;
+	struct adc_joystick_axis *axes;
+	struct iio_channel *chans;
+	int num_chans;
+};
+
+static int adc_joystick_handle(const void *data, void *private)
+{
+	struct adc_joystick *joy = private;
+	enum iio_endian endianness;
+	int bytes, msb, val, idx, i;
+	const u16 *data_u16;
+	bool sign;
+
+	bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
+
+	for (i = 0; i < joy->num_chans; ++i) {
+		idx = joy->chans[i].channel->scan_index;
+		endianness = joy->chans[i].channel->scan_type.endianness;
+		msb = joy->chans[i].channel->scan_type.realbits - 1;
+		sign = tolower(joy->chans[i].channel->scan_type.sign) == 's';
+
+		switch (bytes) {
+		case 1:
+			val = ((const u8 *)data)[idx];
+			break;
+		case 2:
+			data_u16 = (const u16 *)data + idx;
+
+			/*
+			 * Data is aligned to the sample size by IIO core.
+			 * Call `get_unaligned_xe16` to hide type casting.
+			 */
+			if (endianness == IIO_BE)
+				val = get_unaligned_be16(data_u16);
+			else if (endianness == IIO_LE)
+				val = get_unaligned_le16(data_u16);
+			else /* IIO_CPU */
+				val = *data_u16;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		val >>= joy->chans[i].channel->scan_type.shift;
+		if (sign)
+			val = sign_extend32(val, msb);
+		else
+			val &= GENMASK(msb, 0);
+		input_report_abs(joy->input, joy->axes[i].code, val);
+	}
+
+	input_sync(joy->input);
+
+	return 0;
+}
+
+static int adc_joystick_open(struct input_dev *dev)
+{
+	struct adc_joystick *joy = input_get_drvdata(dev);
+	struct device *devp = &dev->dev;
+	int ret;
+
+	ret = iio_channel_start_all_cb(joy->buffer);
+	if (ret)
+		dev_err(devp, "Unable to start callback buffer: %d\n", ret);
+
+	return ret;
+}
+
+static void adc_joystick_close(struct input_dev *dev)
+{
+	struct adc_joystick *joy = input_get_drvdata(dev);
+
+	iio_channel_stop_all_cb(joy->buffer);
+}
+
+static void adc_joystick_cleanup(void *data)
+{
+	iio_channel_release_all_cb(data);
+}
+
+static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
+{
+	struct adc_joystick_axis *axes;
+	struct fwnode_handle *child;
+	int num_axes, error, i;
+
+	num_axes = device_get_child_node_count(dev);
+	if (!num_axes) {
+		dev_err(dev, "Unable to find child nodes\n");
+		return -EINVAL;
+	}
+
+	if (num_axes != joy->num_chans) {
+		dev_err(dev, "Got %d child nodes for %d channels\n",
+			num_axes, joy->num_chans);
+		return -EINVAL;
+	}
+
+	axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL);
+	if (!axes)
+		return -ENOMEM;
+
+	device_for_each_child_node(dev, child) {
+		error = fwnode_property_read_u32(child, "reg", &i);
+		if (error) {
+			dev_err(dev, "reg invalid or missing\n");
+			goto err_fwnode_put;
+		}
+
+		if (i >= num_axes) {
+			error = -EINVAL;
+			dev_err(dev, "No matching axis for reg %d\n", i);
+			goto err_fwnode_put;
+		}
+
+		error = fwnode_property_read_u32(child, "linux,code",
+						 &axes[i].code);
+		if (error) {
+			dev_err(dev, "linux,code invalid or missing\n");
+			goto err_fwnode_put;
+		}
+
+		error = fwnode_property_read_u32_array(child, "abs-range",
+						       axes[i].range, 2);
+		if (error) {
+			dev_err(dev, "abs-range invalid or missing\n");
+			goto err_fwnode_put;
+		}
+
+		fwnode_property_read_u32(child, "abs-fuzz", &axes[i].fuzz);
+		fwnode_property_read_u32(child, "abs-flat", &axes[i].flat);
+
+		input_set_abs_params(joy->input, axes[i].code,
+				     axes[i].range[0], axes[i].range[1],
+				     axes[i].fuzz, axes[i].flat);
+		input_set_capability(joy->input, EV_ABS, axes[i].code);
+	}
+
+	joy->axes = axes;
+
+	return 0;
+
+err_fwnode_put:
+	fwnode_handle_put(child);
+	return error;
+}
+
+static int adc_joystick_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_joystick *joy;
+	struct input_dev *input;
+	int error;
+	int bits;
+	int i;
+
+	joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
+	if (!joy)
+		return -ENOMEM;
+
+	joy->chans = devm_iio_channel_get_all(dev);
+	if (IS_ERR(joy->chans)) {
+		error = PTR_ERR(joy->chans);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Unable to get IIO channels");
+		return error;
+	}
+
+	/* Count how many channels we got. NULL terminated. */
+	for (i = 0; joy->chans[i].indio_dev; i++) {
+		bits = joy->chans[i].channel->scan_type.storagebits;
+		if (!bits || bits > 16) {
+			dev_err(dev, "Unsupported channel storage size\n");
+			return -EINVAL;
+		}
+		if (bits != joy->chans[0].channel->scan_type.storagebits) {
+			dev_err(dev, "Channels must have equal storage size\n");
+			return -EINVAL;
+		}
+	}
+	joy->num_chans = i;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "Unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	joy->input = input;
+	input->name = pdev->name;
+	input->id.bustype = BUS_HOST;
+	input->open = adc_joystick_open;
+	input->close = adc_joystick_close;
+
+	error = adc_joystick_set_axes(dev, joy);
+	if (error)
+		return error;
+
+	input_set_drvdata(input, joy);
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "Unable to register input device\n");
+		return error;
+	}
+
+	joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
+	if (IS_ERR(joy->buffer)) {
+		dev_err(dev, "Unable to allocate callback buffer\n");
+		return PTR_ERR(joy->buffer);
+	}
+
+	error = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer);
+	if (error)  {
+		dev_err(dev, "Unable to add action\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id adc_joystick_of_match[] = {
+	{ .compatible = "adc-joystick", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc_joystick_of_match);
+
+static struct platform_driver adc_joystick_driver = {
+	.driver = {
+		.name = "adc-joystick",
+		.of_match_table = adc_joystick_of_match,
+	},
+	.probe = adc_joystick_probe,
+};
+module_platform_driver(adc_joystick_driver);
+
+MODULE_DESCRIPTION("Input driver for joysticks connected over ADC");
+MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 7c70492d9d6b..f831f01501d5 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -250,8 +250,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	}
 
 	keypad->irq = platform_get_irq(pdev, 0);
-	if (!keypad->irq) {
-		err = -ENXIO;
+	if (keypad->irq < 0) {
+		err = keypad->irq;
 		goto failed_free;
 	}
 
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 94c94d7f5155..d6c924032aaa 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -240,10 +240,8 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (irq < 0)
+		return irq;
 
 	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
 	if (!keypad_data) {
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index af3a6824f1a4..77e0743a3cf8 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -50,7 +50,7 @@ struct twl4030_keypad {
 	bool		autorepeat;
 	unsigned int	n_rows;
 	unsigned int	n_cols;
-	unsigned int	irq;
+	int		irq;
 
 	struct device *dbg_dev;
 	struct input_dev *input;
@@ -376,10 +376,8 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	}
 
 	kp->irq = platform_get_irq(pdev, 0);
-	if (!kp->irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (kp->irq < 0)
+		return kp->irq;
 
 	error = matrix_keypad_build_keymap(keymap_data, NULL,
 					   TWL4030_MAX_ROWS,
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index 08520b3a18b8..cae1a3fae83a 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/acpi.h>
+#include <linux/dmi.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
@@ -23,6 +24,7 @@ struct soc_button_info {
 	unsigned int event_code;
 	bool autorepeat;
 	bool wakeup;
+	bool active_low;
 };
 
 struct soc_device_data {
@@ -42,22 +44,65 @@ struct soc_button_data {
 };
 
 /*
+ * Some 2-in-1s which use the soc_button_array driver have this ugly issue in
+ * their DSDT where the _LID method modifies the irq-type settings of the GPIOs
+ * used for the power and home buttons. The intend of this AML code is to
+ * disable these buttons when the lid is closed.
+ * The AML does this by directly poking the GPIO controllers registers. This is
+ * problematic because when re-enabling the irq, which happens whenever _LID
+ * gets called with the lid open (e.g. on boot and on resume), it sets the
+ * irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the
+ * type to, and expects it to be, IRQ_TYPE_EDGE_BOTH.
+ * To work around this we don't set gpio_keys_button.gpio on these 2-in-1s,
+ * instead we get the irq for the GPIO ourselves, configure it as
+ * IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and pass
+ * the irq in gpio_keys_button.irq. Below is a list of affected devices.
+ */
+static const struct dmi_system_id dmi_use_low_level_irq[] = {
+	{
+		/*
+		 * Acer Switch 10 SW5-012. _LID method messes with home- and
+		 * power-button GPIO IRQ settings. When (re-)enabling the irq
+		 * it ors in its own flags without clearing the previous set
+		 * ones, leading to an irq-type of IRQ_TYPE_LEVEL_LOW |
+		 * IRQ_TYPE_LEVEL_HIGH causing a continuous interrupt storm.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
+		},
+	},
+	{
+		/*
+		 * Acer One S1003. _LID method messes with power-button GPIO
+		 * IRQ settings, leading to a non working power-button.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"),
+		},
+	},
+	{} /* Terminating entry */
+};
+
+/*
  * Get the Nth GPIO number from the ACPI object.
  */
-static int soc_button_lookup_gpio(struct device *dev, int acpi_index)
+static int soc_button_lookup_gpio(struct device *dev, int acpi_index,
+				  int *gpio_ret, int *irq_ret)
 {
 	struct gpio_desc *desc;
-	int gpio;
 
 	desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS);
 	if (IS_ERR(desc))
 		return PTR_ERR(desc);
 
-	gpio = desc_to_gpio(desc);
+	*gpio_ret = desc_to_gpio(desc);
+	*irq_ret = gpiod_to_irq(desc);
 
 	gpiod_put(desc);
 
-	return gpio;
+	return 0;
 }
 
 static struct platform_device *
@@ -69,9 +114,8 @@ soc_button_device_create(struct platform_device *pdev,
 	struct platform_device *pd;
 	struct gpio_keys_button *gpio_keys;
 	struct gpio_keys_platform_data *gpio_keys_pdata;
+	int error, gpio, irq;
 	int n_buttons = 0;
-	int gpio;
-	int error;
 
 	for (info = button_info; info->name; info++)
 		if (info->autorepeat == autorepeat)
@@ -91,8 +135,8 @@ soc_button_device_create(struct platform_device *pdev,
 		if (info->autorepeat != autorepeat)
 			continue;
 
-		gpio = soc_button_lookup_gpio(&pdev->dev, info->acpi_index);
-		if (!gpio_is_valid(gpio)) {
+		error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq);
+		if (error || irq < 0) {
 			/*
 			 * Skip GPIO if not present. Note we deliberately
 			 * ignore -EPROBE_DEFER errors here. On some devices
@@ -107,10 +151,18 @@ soc_button_device_create(struct platform_device *pdev,
 			continue;
 		}
 
+		/* See dmi_use_low_level_irq[] comment */
+		if (!autorepeat && dmi_check_system(dmi_use_low_level_irq)) {
+			irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+			gpio_keys[n_buttons].irq = irq;
+			gpio_keys[n_buttons].gpio = -ENOENT;
+		} else {
+			gpio_keys[n_buttons].gpio = gpio;
+		}
+
 		gpio_keys[n_buttons].type = info->event_type;
 		gpio_keys[n_buttons].code = info->event_code;
-		gpio_keys[n_buttons].gpio = gpio;
-		gpio_keys[n_buttons].active_low = 1;
+		gpio_keys[n_buttons].active_low = info->active_low;
 		gpio_keys[n_buttons].desc = info->name;
 		gpio_keys[n_buttons].wakeup = info->wakeup;
 		/* These devices often use cheap buttons, use 50 ms debounce */
@@ -173,6 +225,7 @@ static int soc_button_parse_btn_desc(struct device *dev,
 	}
 
 	info->event_type = EV_KEY;
+	info->active_low = true;
 	info->acpi_index =
 		soc_button_get_acpi_object_int(&desc->package.elements[1]);
 	upage = soc_button_get_acpi_object_int(&desc->package.elements[3]);
@@ -383,11 +436,11 @@ static int soc_button_probe(struct platform_device *pdev)
  * Platforms"
  */
 static const struct soc_button_info soc_button_PNP0C40[] = {
-	{ "power", 0, EV_KEY, KEY_POWER, false, true },
-	{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true },
-	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
-	{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false },
-	{ "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false },
+	{ "power", 0, EV_KEY, KEY_POWER, false, true, true },
+	{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true, true },
+	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+	{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
+	{ "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false, true },
 	{ }
 };
 
@@ -395,6 +448,15 @@ static const struct soc_device_data soc_device_PNP0C40 = {
 	.button_info = soc_button_PNP0C40,
 };
 
+static const struct soc_button_info soc_button_INT33D3[] = {
+	{ "tablet_mode", 0, EV_SW, SW_TABLET_MODE, false, false, false },
+	{ }
+};
+
+static const struct soc_device_data soc_device_INT33D3 = {
+	.button_info = soc_button_INT33D3,
+};
+
 /*
  * Special device check for Surface Book 2 and Surface Pro (2017).
  * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned
@@ -444,9 +506,9 @@ static int soc_device_check_MSHW0040(struct device *dev)
  * Obtained from DSDT/testing.
  */
 static const struct soc_button_info soc_button_MSHW0040[] = {
-	{ "power", 0, EV_KEY, KEY_POWER, false, true },
-	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
-	{ "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false },
+	{ "power", 0, EV_KEY, KEY_POWER, false, true, true },
+	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+	{ "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
 	{ }
 };
 
@@ -457,6 +519,8 @@ static const struct soc_device_data soc_device_MSHW0040 = {
 
 static const struct acpi_device_id soc_button_acpi_match[] = {
 	{ "PNP0C40", (unsigned long)&soc_device_PNP0C40 },
+	{ "INT33D3", (unsigned long)&soc_device_INT33D3 },
+	{ "ID9001", (unsigned long)&soc_device_INT33D3 },
 	{ "ACPI0011", 0 },
 
 	/* Microsoft Surface Devices (5th and 6th generation) */
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 4b81b2d0fe06..82577095e175 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -179,12 +179,14 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN0093", /* T480 */
 	"LEN0096", /* X280 */
 	"LEN0097", /* X280 -> ALPS trackpoint */
-	"LEN0099", /* X1 Extreme 1st */
+	"LEN0099", /* X1 Extreme Gen 1 / P1 Gen 1 */
 	"LEN009b", /* T580 */
+	"LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */
 	"LEN200f", /* T450s */
 	"LEN2044", /* L470  */
 	"LEN2054", /* E480 */
 	"LEN2055", /* E580 */
+	"LEN2068", /* T14 Gen 1 */
 	"SYN3052", /* HP EliteBook 840 G4 */
 	"SYN3221", /* HP 15-ay000 */
 	"SYN323d", /* HP Spectre X360 13-w013dx */
@@ -1752,7 +1754,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
 			.kernel_tracking = false,
 			.topbuttonpad = topbuttonpad,
 		},
-		.f30_data = {
+		.gpio_data = {
 			.buttonpad = SYN_CAP_CLICKPAD(info->ext_cap_0c),
 			.trackstick_buttons =
 				!!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10),
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
index a212ff706f74..16119f760d11 100644
--- a/drivers/input/rmi4/Kconfig
+++ b/drivers/input/rmi4/Kconfig
@@ -100,6 +100,14 @@ config RMI4_F34
 	  device via the firmware loader interface. This is triggered using a
 	  sysfs attribute.
 
+config RMI4_F3A
+	bool "RMI4 Function 3A (GPIO)"
+	help
+	  Say Y here if you want to add support for RMI4 function 3A.
+
+	  Function 3A provides GPIO support for RMI4 devices. This includes
+	  support for buttons on TouchPads and ClickPads.
+
 config RMI4_F54
 	bool "RMI4 Function 54 (Analog diagnostics)"
 	depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
index f17631656987..02f14c846861 100644
--- a/drivers/input/rmi4/Makefile
+++ b/drivers/input/rmi4/Makefile
@@ -10,6 +10,7 @@ rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
 rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
 rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
 rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o rmi_f34v7.o
+rmi_core-$(CONFIG_RMI4_F3A) += rmi_f3a.o
 rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
 rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o
 
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index af706a583656..47d1b97ed6cf 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -365,6 +365,9 @@ static struct rmi_function_handler *fn_handlers[] = {
 #ifdef CONFIG_RMI4_F34
 	&rmi_f34_handler,
 #endif
+#ifdef CONFIG_RMI4_F3A
+	&rmi_f3a_handler,
+#endif
 #ifdef CONFIG_RMI4_F54
 	&rmi_f54_handler,
 #endif
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
index 65bfaa95e193..1c6c6086c0e5 100644
--- a/drivers/input/rmi4/rmi_driver.h
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -135,6 +135,7 @@ extern struct rmi_function_handler rmi_f11_handler;
 extern struct rmi_function_handler rmi_f12_handler;
 extern struct rmi_function_handler rmi_f30_handler;
 extern struct rmi_function_handler rmi_f34_handler;
+extern struct rmi_function_handler rmi_f3a_handler;
 extern struct rmi_function_handler rmi_f54_handler;
 extern struct rmi_function_handler rmi_f55_handler;
 #endif
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
index a90dad1d9ac7..35045f161dc2 100644
--- a/drivers/input/rmi4/rmi_f30.c
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -168,17 +168,17 @@ static int rmi_f30_config(struct rmi_function *fn)
 				rmi_get_platform_data(fn->rmi_dev);
 	int error;
 
-	/* can happen if f30_data.disable is set */
+	/* can happen if gpio_data.disable is set */
 	if (!f30)
 		return 0;
 
-	if (pdata->f30_data.trackstick_buttons) {
+	if (pdata->gpio_data.trackstick_buttons) {
 		/* Try [re-]establish link to F03. */
 		f30->f03 = rmi_find_function(fn->rmi_dev, 0x03);
 		f30->trackstick_buttons = f30->f03 != NULL;
 	}
 
-	if (pdata->f30_data.disable) {
+	if (pdata->gpio_data.disable) {
 		drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
 	} else {
 		/* Write Control Register values back to device */
@@ -245,10 +245,10 @@ static int rmi_f30_map_gpios(struct rmi_function *fn,
 		if (!rmi_f30_is_valid_button(i, f30->ctrl))
 			continue;
 
-		if (pdata->f30_data.trackstick_buttons &&
+		if (pdata->gpio_data.trackstick_buttons &&
 		    i >= TRACKSTICK_RANGE_START && i < TRACKSTICK_RANGE_END) {
 			f30->gpioled_key_map[i] = trackstick_button++;
-		} else if (!pdata->f30_data.buttonpad || !button_mapped) {
+		} else if (!pdata->gpio_data.buttonpad || !button_mapped) {
 			f30->gpioled_key_map[i] = button;
 			input_set_capability(input, EV_KEY, button++);
 			button_mapped = true;
@@ -264,7 +264,7 @@ static int rmi_f30_map_gpios(struct rmi_function *fn,
 	 * but I am not sure, so use only the pdata info and the number of
 	 * mapped buttons.
 	 */
-	if (pdata->f30_data.buttonpad || (button - BTN_LEFT == 1))
+	if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1))
 		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 
 	return 0;
@@ -372,7 +372,7 @@ static int rmi_f30_probe(struct rmi_function *fn)
 	struct f30_data *f30;
 	int error;
 
-	if (pdata->f30_data.disable)
+	if (pdata->gpio_data.disable)
 		return 0;
 
 	if (!drv_data->input) {
diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c
index 74f7c6f214ff..8d7ec9d89b18 100644
--- a/drivers/input/rmi4/rmi_f34v7.c
+++ b/drivers/input/rmi4/rmi_f34v7.c
@@ -1364,9 +1364,14 @@ int rmi_f34v7_probe(struct f34_data *f34)
 		f34->bl_version = 6;
 	} else if (f34->bootloader_id[1] == 7) {
 		f34->bl_version = 7;
+	} else if (f34->bootloader_id[1] == 8) {
+		f34->bl_version = 8;
 	} else {
-		dev_err(&f34->fn->dev, "%s: Unrecognized bootloader version\n",
-				__func__);
+		dev_err(&f34->fn->dev,
+			"%s: Unrecognized bootloader version: %d (%c) %d (%c)\n",
+			__func__,
+			f34->bootloader_id[0], f34->bootloader_id[0],
+			f34->bootloader_id[1], f34->bootloader_id[1]);
 		return -EINVAL;
 	}
 
diff --git a/drivers/input/rmi4/rmi_f3a.c b/drivers/input/rmi4/rmi_f3a.c
new file mode 100644
index 000000000000..0e8baed84dbb
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f3a.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012-2020 Synaptics Incorporated
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define RMI_F3A_MAX_GPIO_COUNT		128
+#define RMI_F3A_MAX_REG_SIZE		DIV_ROUND_UP(RMI_F3A_MAX_GPIO_COUNT, 8)
+
+/* Defs for Query 0 */
+#define RMI_F3A_GPIO_COUNT		0x7F
+
+#define RMI_F3A_DATA_REGS_MAX_SIZE	RMI_F3A_MAX_REG_SIZE
+
+#define TRACKSTICK_RANGE_START		3
+#define TRACKSTICK_RANGE_END		6
+
+struct f3a_data {
+	/* Query Data */
+	u8 gpio_count;
+
+	u8 register_count;
+
+	u8 data_regs[RMI_F3A_DATA_REGS_MAX_SIZE];
+	u16 *gpio_key_map;
+
+	struct input_dev *input;
+
+	struct rmi_function *f03;
+	bool trackstick_buttons;
+};
+
+static void rmi_f3a_report_button(struct rmi_function *fn,
+				  struct f3a_data *f3a, unsigned int button)
+{
+	u16 key_code = f3a->gpio_key_map[button];
+	bool key_down = !(f3a->data_regs[0] & BIT(button));
+
+	if (f3a->trackstick_buttons &&
+		button >= TRACKSTICK_RANGE_START &&
+		button <= TRACKSTICK_RANGE_END) {
+		rmi_f03_overwrite_button(f3a->f03, key_code, key_down);
+	} else {
+		rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+			"%s: call input report key (0x%04x) value (0x%02x)",
+			__func__, key_code, key_down);
+		input_report_key(f3a->input, key_code, key_down);
+	}
+}
+
+static irqreturn_t rmi_f3a_attention(int irq, void *ctx)
+{
+	struct rmi_function *fn = ctx;
+	struct f3a_data *f3a = dev_get_drvdata(&fn->dev);
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+	int error;
+	int i;
+
+	if (drvdata->attn_data.data) {
+		if (drvdata->attn_data.size < f3a->register_count) {
+			dev_warn(&fn->dev,
+				 "F3A interrupted, but data is missing\n");
+			return IRQ_HANDLED;
+		}
+		memcpy(f3a->data_regs, drvdata->attn_data.data,
+			f3a->register_count);
+		drvdata->attn_data.data += f3a->register_count;
+		drvdata->attn_data.size -= f3a->register_count;
+	} else {
+		error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
+					f3a->data_regs, f3a->register_count);
+		if (error) {
+			dev_err(&fn->dev,
+				"%s: Failed to read F3a data registers: %d\n",
+				__func__, error);
+			return IRQ_RETVAL(error);
+		}
+	}
+
+	for (i = 0; i < f3a->gpio_count; i++)
+		if (f3a->gpio_key_map[i] != KEY_RESERVED)
+			rmi_f3a_report_button(fn, f3a, i);
+	if (f3a->trackstick_buttons)
+		rmi_f03_commit_buttons(f3a->f03);
+
+	return IRQ_HANDLED;
+}
+
+static int rmi_f3a_config(struct rmi_function *fn)
+{
+	struct f3a_data *f3a = dev_get_drvdata(&fn->dev);
+	struct rmi_driver *drv = fn->rmi_dev->driver;
+	const struct rmi_device_platform_data *pdata =
+			rmi_get_platform_data(fn->rmi_dev);
+
+	if (!f3a)
+		return 0;
+
+	if (pdata->gpio_data.trackstick_buttons) {
+		/* Try [re-]establish link to F03. */
+		f3a->f03 = rmi_find_function(fn->rmi_dev, 0x03);
+		f3a->trackstick_buttons = f3a->f03 != NULL;
+	}
+
+	drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+
+	return 0;
+}
+
+static bool rmi_f3a_is_valid_button(int button, struct f3a_data *f3a,
+					u8 *query1_regs, u8 *ctrl1_regs)
+{
+	/* gpio exist && direction input */
+	return (query1_regs[0] & BIT(button)) && !(ctrl1_regs[0] & BIT(button));
+}
+
+static int rmi_f3a_map_gpios(struct rmi_function *fn, struct f3a_data *f3a,
+				u8 *query1_regs, u8 *ctrl1_regs)
+{
+	const struct rmi_device_platform_data *pdata =
+			rmi_get_platform_data(fn->rmi_dev);
+	struct input_dev *input = f3a->input;
+	unsigned int button = BTN_LEFT;
+	unsigned int trackstick_button = BTN_LEFT;
+	bool button_mapped = false;
+	int i;
+	int button_count = min_t(u8, f3a->gpio_count, TRACKSTICK_RANGE_END);
+
+	f3a->gpio_key_map = devm_kcalloc(&fn->dev,
+						button_count,
+						sizeof(f3a->gpio_key_map[0]),
+						GFP_KERNEL);
+	if (!f3a->gpio_key_map) {
+		dev_err(&fn->dev, "Failed to allocate gpio map memory.\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < button_count; i++) {
+		if (!rmi_f3a_is_valid_button(i, f3a, query1_regs, ctrl1_regs))
+			continue;
+
+		if (pdata->gpio_data.trackstick_buttons &&
+			i >= TRACKSTICK_RANGE_START &&
+			i < TRACKSTICK_RANGE_END) {
+			f3a->gpio_key_map[i] = trackstick_button++;
+		} else if (!pdata->gpio_data.buttonpad || !button_mapped) {
+			f3a->gpio_key_map[i] = button;
+			input_set_capability(input, EV_KEY, button++);
+			button_mapped = true;
+		}
+	}
+	input->keycode = f3a->gpio_key_map;
+	input->keycodesize = sizeof(f3a->gpio_key_map[0]);
+	input->keycodemax = f3a->gpio_count;
+
+	if (pdata->gpio_data.buttonpad || (button - BTN_LEFT == 1))
+		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+	return 0;
+}
+
+static int rmi_f3a_initialize(struct rmi_function *fn, struct f3a_data *f3a)
+{
+	u8 query1[RMI_F3A_MAX_REG_SIZE];
+	u8 ctrl1[RMI_F3A_MAX_REG_SIZE];
+	u8 buf;
+	int error;
+
+	error = rmi_read(fn->rmi_dev, fn->fd.query_base_addr, &buf);
+	if (error < 0) {
+		dev_err(&fn->dev, "Failed to read general info register: %d\n",
+			error);
+		return -ENODEV;
+	}
+
+	f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT;
+	f3a->register_count = DIV_ROUND_UP(f3a->gpio_count, 8);
+
+	/* Query1 -> gpio exist */
+	error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr + 1,
+				query1, f3a->register_count);
+	if (error) {
+		dev_err(&fn->dev, "Failed to read query1 register\n");
+		return error;
+	}
+
+	/* Ctrl1 -> gpio direction */
+	error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr + 1,
+				ctrl1, f3a->register_count);
+	if (error) {
+		dev_err(&fn->dev, "Failed to read control1 register\n");
+		return error;
+	}
+
+	error = rmi_f3a_map_gpios(fn, f3a, query1, ctrl1);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int rmi_f3a_probe(struct rmi_function *fn)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	struct f3a_data *f3a;
+	int error;
+
+	if (!drv_data->input) {
+		dev_info(&fn->dev, "F3A: no input device found, ignoring\n");
+		return -ENXIO;
+	}
+
+	f3a = devm_kzalloc(&fn->dev, sizeof(*f3a), GFP_KERNEL);
+	if (!f3a)
+		return -ENOMEM;
+
+	f3a->input = drv_data->input;
+
+	error = rmi_f3a_initialize(fn, f3a);
+	if (error)
+		return error;
+
+	dev_set_drvdata(&fn->dev, f3a);
+	return 0;
+}
+
+struct rmi_function_handler rmi_f3a_handler = {
+	.driver = {
+		.name = "rmi4_f3a",
+	},
+	.func = 0x3a,
+	.probe = rmi_f3a_probe,
+	.config = rmi_f3a_config,
+	.attention = rmi_f3a_attention,
+};
diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
index a681a2c04e39..f15ed3dcdb9b 100644
--- a/drivers/input/serio/sun4i-ps2.c
+++ b/drivers/input/serio/sun4i-ps2.c
@@ -211,7 +211,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	struct sun4i_ps2data *drvdata;
 	struct serio *serio;
 	struct device *dev = &pdev->dev;
-	unsigned int irq;
 	int error;
 
 	drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL);
@@ -264,14 +263,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	writel(0, drvdata->reg_base + PS2_REG_GCTL);
 
 	/* Get IRQ for the device */
-	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(dev, "no IRQ found\n");
-		error = -ENXIO;
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
 		goto err_disable_clk;
 	}
 
-	drvdata->irq = irq;
 	drvdata->serio = serio;
 	drvdata->dev = dev;
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 35c867b2d9a7..f012fe746df0 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1322,4 +1322,16 @@ config TOUCHSCREEN_IQS5XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called iqs5xx.
 
+config TOUCHSCREEN_ZINITIX
+	tristate "Zinitix touchscreen support"
+	depends on I2C
+	help
+	  Say Y here if you have a touchscreen using Zinitix bt541,
+	  or something similar enough.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zinitix.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 30d1e1b42492..6233541e9173 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -111,3 +111,4 @@ obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50)	+= colibri-vf50-ts.o
 obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023)	+= rohm_bu21023.o
 obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW)	+= raspberrypi-ts.o
 obj-$(CONFIG_TOUCHSCREEN_IQS5XX)	+= iqs5xx.o
+obj-$(CONFIG_TOUCHSCREEN_ZINITIX)	+= zinitix.o
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index b0bd5bb079be..50c348297e38 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -90,7 +90,7 @@
 /* FW read command, 0x53 0x?? 0x0, 0x01 */
 #define E_ELAN_INFO_FW_VER	0x00
 #define E_ELAN_INFO_BC_VER	0x10
-#define E_ELAN_INFO_REK		0xE0
+#define E_ELAN_INFO_REK		0xD0
 #define E_ELAN_INFO_TEST_VER	0xE0
 #define E_ELAN_INFO_FW_ID	0xF0
 #define E_INFO_OSR		0xD6
@@ -134,6 +134,7 @@ struct elants_data {
 	u8 bc_version;
 	u8 iap_version;
 	u16 hw_version;
+	u8 major_res;
 	unsigned int x_res;	/* resolution in units/mm */
 	unsigned int y_res;
 	unsigned int x_max;
@@ -459,6 +460,9 @@ static int elants_i2c_query_ts_info(struct elants_data *ts)
 	rows = resp[2] + resp[6] + resp[10];
 	cols = resp[3] + resp[7] + resp[11];
 
+	/* Get report resolution value of ABS_MT_TOUCH_MAJOR */
+	ts->major_res = resp[16];
+
 	/* Process mm_to_pixel information */
 	error = elants_i2c_execute_command(client,
 					   get_osr_cmd, sizeof(get_osr_cmd),
@@ -1325,6 +1329,8 @@ static int elants_i2c_probe(struct i2c_client *client,
 			     0, MT_TOOL_PALM, 0, 0);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
+	if (ts->major_res > 0)
+		input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res);
 
 	touchscreen_parse_properties(ts->input, true, &ts->prop);
 
diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c
index 9ed258854349..cd369f9ac5e6 100644
--- a/drivers/input/touchscreen/imx6ul_tsc.c
+++ b/drivers/input/touchscreen/imx6ul_tsc.c
@@ -315,9 +315,8 @@ static irqreturn_t adc_irq_fn(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int imx6ul_tsc_open(struct input_dev *input_dev)
+static int imx6ul_tsc_start(struct imx6ul_tsc *tsc)
 {
-	struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
 	int err;
 
 	err = clk_prepare_enable(tsc->adc_clk);
@@ -349,16 +348,29 @@ disable_adc_clk:
 	return err;
 }
 
-static void imx6ul_tsc_close(struct input_dev *input_dev)
+static void imx6ul_tsc_stop(struct imx6ul_tsc *tsc)
 {
-	struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
-
 	imx6ul_tsc_disable(tsc);
 
 	clk_disable_unprepare(tsc->tsc_clk);
 	clk_disable_unprepare(tsc->adc_clk);
 }
 
+
+static int imx6ul_tsc_open(struct input_dev *input_dev)
+{
+	struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
+
+	return imx6ul_tsc_start(tsc);
+}
+
+static void imx6ul_tsc_close(struct input_dev *input_dev)
+{
+	struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
+
+	imx6ul_tsc_stop(tsc);
+}
+
 static int imx6ul_tsc_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -509,12 +521,8 @@ static int __maybe_unused imx6ul_tsc_suspend(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users) {
-		imx6ul_tsc_disable(tsc);
-
-		clk_disable_unprepare(tsc->tsc_clk);
-		clk_disable_unprepare(tsc->adc_clk);
-	}
+	if (input_dev->users)
+		imx6ul_tsc_stop(tsc);
 
 	mutex_unlock(&input_dev->mutex);
 
@@ -530,22 +538,11 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users) {
-		retval = clk_prepare_enable(tsc->adc_clk);
-		if (retval)
-			goto out;
-
-		retval = clk_prepare_enable(tsc->tsc_clk);
-		if (retval) {
-			clk_disable_unprepare(tsc->adc_clk);
-			goto out;
-		}
-
-		retval = imx6ul_tsc_init(tsc);
-	}
+	if (input_dev->users)
+		retval = imx6ul_tsc_start(tsc);
 
-out:
 	mutex_unlock(&input_dev->mutex);
+
 	return retval;
 }
 
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index fe245439adee..e694a9b2b1e5 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -51,6 +51,7 @@
 
 /* Touch relative info */
 #define RM_MAX_RETRIES		3
+#define RM_RETRY_DELAY_MS	20
 #define RM_MAX_TOUCH_NUM	10
 #define RM_BOOT_DELAY_MS	100
 
@@ -136,83 +137,82 @@ struct raydium_data {
 	bool wake_irq_enabled;
 };
 
-static int raydium_i2c_send(struct i2c_client *client,
-			    u8 addr, const void *data, size_t len)
+static int raydium_i2c_xfer(struct i2c_client *client,
+			    u32 addr, void *data, size_t len, bool is_read)
 {
-	u8 *buf;
-	int tries = 0;
-	int ret;
-
-	buf = kmalloc(len + 1, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	buf[0] = addr;
-	memcpy(buf + 1, data, len);
-
-	do {
-		ret = i2c_master_send(client, buf, len + 1);
-		if (likely(ret == len + 1))
-			break;
-
-		msleep(20);
-	} while (++tries < RM_MAX_RETRIES);
-
-	kfree(buf);
-
-	if (unlikely(ret != len + 1)) {
-		if (ret >= 0)
-			ret = -EIO;
-		dev_err(&client->dev, "%s failed: %d\n", __func__, ret);
-		return ret;
-	}
+	struct raydium_bank_switch_header {
+		u8 cmd;
+		__be32 be_addr;
+	} __packed header = {
+		.cmd = RM_CMD_BANK_SWITCH,
+		.be_addr = cpu_to_be32(addr),
+	};
 
-	return 0;
-}
+	u8 reg_addr = addr & 0xff;
 
-static int raydium_i2c_read(struct i2c_client *client,
-			    u8 addr, void *data, size_t len)
-{
 	struct i2c_msg xfer[] = {
 		{
 			.addr = client->addr,
+			.len = sizeof(header),
+			.buf = (u8 *)&header,
+		},
+		{
+			.addr = client->addr,
 			.len = 1,
-			.buf = &addr,
+			.buf = &reg_addr,
 		},
 		{
 			.addr = client->addr,
-			.flags = I2C_M_RD,
 			.len = len,
 			.buf = data,
+			.flags = is_read ? I2C_M_RD : 0,
 		}
 	};
+
+	/*
+	 * If address is greater than 255, then RM_CMD_BANK_SWITCH needs to be
+	 * sent first. Else, skip the header i.e. xfer[0].
+	 */
+	int xfer_start_idx = (addr > 0xff) ? 0 : 1;
+	size_t xfer_count = ARRAY_SIZE(xfer) - xfer_start_idx;
 	int ret;
 
-	ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer));
-	if (unlikely(ret != ARRAY_SIZE(xfer)))
-		return ret < 0 ? ret : -EIO;
+	ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
+	if (likely(ret == xfer_count))
+		return 0;
+
+	return ret < 0 ? ret : -EIO;
+}
 
-	return 0;
+static int raydium_i2c_send(struct i2c_client *client,
+			    u32 addr, const void *data, size_t len)
+{
+	int tries = 0;
+	int error;
+
+	do {
+		error = raydium_i2c_xfer(client, addr, (void *)data, len,
+					 false);
+		if (likely(!error))
+			return 0;
+
+		msleep(RM_RETRY_DELAY_MS);
+	} while (++tries < RM_MAX_RETRIES);
+
+	dev_err(&client->dev, "%s failed: %d\n", __func__, error);
+	return error;
 }
 
-static int raydium_i2c_read_message(struct i2c_client *client,
-				    u32 addr, void *data, size_t len)
+static int raydium_i2c_read(struct i2c_client *client,
+			    u32 addr, void *data, size_t len)
 {
-	__be32 be_addr;
 	size_t xfer_len;
 	int error;
 
 	while (len) {
 		xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE);
-
-		be_addr = cpu_to_be32(addr);
-
-		error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH,
-					 &be_addr, sizeof(be_addr));
-		if (!error)
-			error = raydium_i2c_read(client, addr & 0xff,
-						 data, xfer_len);
-		if (error)
+		error = raydium_i2c_xfer(client, addr, data, xfer_len, true);
+		if (unlikely(error))
 			return error;
 
 		len -= xfer_len;
@@ -223,27 +223,13 @@ static int raydium_i2c_read_message(struct i2c_client *client,
 	return 0;
 }
 
-static int raydium_i2c_send_message(struct i2c_client *client,
-				    u32 addr, const void *data, size_t len)
-{
-	__be32 be_addr = cpu_to_be32(addr);
-	int error;
-
-	error = raydium_i2c_send(client, RM_CMD_BANK_SWITCH,
-				 &be_addr, sizeof(be_addr));
-	if (!error)
-		error = raydium_i2c_send(client, addr & 0xff, data, len);
-
-	return error;
-}
-
 static int raydium_i2c_sw_reset(struct i2c_client *client)
 {
 	const u8 soft_rst_cmd = 0x01;
 	int error;
 
-	error = raydium_i2c_send_message(client, RM_RESET_MSG_ADDR,
-					 &soft_rst_cmd, sizeof(soft_rst_cmd));
+	error = raydium_i2c_send(client, RM_RESET_MSG_ADDR, &soft_rst_cmd,
+				 sizeof(soft_rst_cmd));
 	if (error) {
 		dev_err(&client->dev, "software reset failed: %d\n", error);
 		return error;
@@ -295,9 +281,8 @@ static int raydium_i2c_query_ts_info(struct raydium_data *ts)
 		if (error)
 			continue;
 
-		error = raydium_i2c_read_message(client,
-						 le32_to_cpu(query_bank_addr),
-						 &ts->info, sizeof(ts->info));
+		error = raydium_i2c_read(client, le32_to_cpu(query_bank_addr),
+					 &ts->info, sizeof(ts->info));
 		if (error)
 			continue;
 
@@ -834,8 +819,8 @@ static irqreturn_t raydium_i2c_irq(int irq, void *_dev)
 	if (ts->boot_mode != RAYDIUM_TS_MAIN)
 		goto out;
 
-	error = raydium_i2c_read_message(ts->client, ts->data_bank_addr,
-					 ts->report_data, ts->pkg_size);
+	error = raydium_i2c_read(ts->client, ts->data_bank_addr,
+				 ts->report_data, ts->pkg_size);
 	if (error)
 		goto out;
 
diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index df946869d4cd..9a64e1dbc04a 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -479,7 +479,7 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
 
 	mutex_lock(&sdata->mutex);
 
-	if (value & sdata->hover_enabled)
+	if (value && sdata->hover_enabled)
 		goto out;
 
 	if (sdata->running)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
new file mode 100644
index 000000000000..1acc2eb2bcb3
--- /dev/null
+++ b/drivers/input/touchscreen/zinitix.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Register Map */
+
+#define BT541_SWRESET_CMD			0x0000
+#define BT541_WAKEUP_CMD			0x0001
+
+#define BT541_IDLE_CMD				0x0004
+#define BT541_SLEEP_CMD				0x0005
+
+#define BT541_CLEAR_INT_STATUS_CMD		0x0003
+#define BT541_CALIBRATE_CMD			0x0006
+#define BT541_SAVE_STATUS_CMD			0x0007
+#define BT541_SAVE_CALIBRATION_CMD		0x0008
+#define BT541_RECALL_FACTORY_CMD		0x000f
+
+#define BT541_THRESHOLD				0x0020
+
+#define BT541_LARGE_PALM_REJECT_AREA_TH		0x003F
+
+#define BT541_DEBUG_REG				0x0115 /* 0~7 */
+
+#define BT541_TOUCH_MODE			0x0010
+#define BT541_CHIP_REVISION			0x0011
+#define BT541_FIRMWARE_VERSION			0x0012
+
+#define ZINITIX_USB_DETECT			0x116
+
+#define BT541_MINOR_FW_VERSION			0x0121
+
+#define BT541_VENDOR_ID				0x001C
+#define BT541_HW_ID				0x0014
+
+#define BT541_DATA_VERSION_REG			0x0013
+#define BT541_SUPPORTED_FINGER_NUM		0x0015
+#define BT541_EEPROM_INFO			0x0018
+#define BT541_INITIAL_TOUCH_MODE		0x0019
+
+#define BT541_TOTAL_NUMBER_OF_X			0x0060
+#define BT541_TOTAL_NUMBER_OF_Y			0x0061
+
+#define BT541_DELAY_RAW_FOR_HOST		0x007f
+
+#define BT541_BUTTON_SUPPORTED_NUM		0x00B0
+#define BT541_BUTTON_SENSITIVITY		0x00B2
+#define BT541_DUMMY_BUTTON_SENSITIVITY		0X00C8
+
+#define BT541_X_RESOLUTION			0x00C0
+#define BT541_Y_RESOLUTION			0x00C1
+
+#define BT541_POINT_STATUS_REG			0x0080
+#define BT541_ICON_STATUS_REG			0x00AA
+
+#define BT541_POINT_COORD_REG			(BT541_POINT_STATUS_REG + 2)
+
+#define BT541_AFE_FREQUENCY			0x0100
+#define BT541_DND_N_COUNT			0x0122
+#define BT541_DND_U_COUNT			0x0135
+
+#define BT541_RAWDATA_REG			0x0200
+
+#define BT541_EEPROM_INFO_REG			0x0018
+
+#define BT541_INT_ENABLE_FLAG			0x00f0
+#define BT541_PERIODICAL_INTERRUPT_INTERVAL	0x00f1
+
+#define BT541_BTN_WIDTH				0x016d
+
+#define BT541_CHECKSUM_RESULT			0x012c
+
+#define BT541_INIT_FLASH			0x01d0
+#define BT541_WRITE_FLASH			0x01d1
+#define BT541_READ_FLASH			0x01d2
+
+#define ZINITIX_INTERNAL_FLAG_02		0x011e
+#define ZINITIX_INTERNAL_FLAG_03		0x011f
+
+#define ZINITIX_I2C_CHECKSUM_WCNT		0x016a
+#define ZINITIX_I2C_CHECKSUM_RESULT		0x016c
+
+/* Interrupt & status register flags */
+
+#define BIT_PT_CNT_CHANGE			BIT(0)
+#define BIT_DOWN				BIT(1)
+#define BIT_MOVE				BIT(2)
+#define BIT_UP					BIT(3)
+#define BIT_PALM				BIT(4)
+#define BIT_PALM_REJECT				BIT(5)
+#define BIT_RESERVED_0				BIT(6)
+#define BIT_RESERVED_1				BIT(7)
+#define BIT_WEIGHT_CHANGE			BIT(8)
+#define BIT_PT_NO_CHANGE			BIT(9)
+#define BIT_REJECT				BIT(10)
+#define BIT_PT_EXIST				BIT(11)
+#define BIT_RESERVED_2				BIT(12)
+#define BIT_ERROR				BIT(13)
+#define BIT_DEBUG				BIT(14)
+#define BIT_ICON_EVENT				BIT(15)
+
+#define SUB_BIT_EXIST				BIT(0)
+#define SUB_BIT_DOWN				BIT(1)
+#define SUB_BIT_MOVE				BIT(2)
+#define SUB_BIT_UP				BIT(3)
+#define SUB_BIT_UPDATE				BIT(4)
+#define SUB_BIT_WAIT				BIT(5)
+
+#define DEFAULT_TOUCH_POINT_MODE		2
+#define MAX_SUPPORTED_FINGER_NUM		5
+
+#define CHIP_ON_DELAY				15 // ms
+#define FIRMWARE_ON_DELAY			40 // ms
+
+struct point_coord {
+	__le16	x;
+	__le16	y;
+	u8	width;
+	u8	sub_status;
+	// currently unused, but needed as padding:
+	u8	minor_width;
+	u8	angle;
+};
+
+struct touch_event {
+	__le16	status;
+	u8	finger_cnt;
+	u8	time_stamp;
+	struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM];
+};
+
+struct bt541_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct touchscreen_properties prop;
+	struct regulator_bulk_data supplies[2];
+	u32 zinitix_mode;
+};
+
+static int zinitix_read_data(struct i2c_client *client,
+			     u16 reg, void *values, size_t length)
+{
+	__le16 reg_le = cpu_to_le16(reg);
+	int ret;
+
+	/* A single i2c_transfer() transaction does not work here. */
+	ret = i2c_master_send(client, (u8 *)&reg_le, sizeof(reg_le));
+	if (ret != sizeof(reg_le))
+		return ret < 0 ? ret : -EIO;
+
+	ret = i2c_master_recv(client, (u8 *)values, length);
+	if (ret != length)
+		return ret < 0 ? ret : -EIO; ;
+
+	return 0;
+}
+
+static int zinitix_write_u16(struct i2c_client *client, u16 reg, u16 value)
+{
+	__le16 packet[2] = {cpu_to_le16(reg), cpu_to_le16(value)};
+	int ret;
+
+	ret = i2c_master_send(client, (u8 *)packet, sizeof(packet));
+	if (ret != sizeof(packet))
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int zinitix_write_cmd(struct i2c_client *client, u16 reg)
+{
+	__le16 reg_le = cpu_to_le16(reg);
+	int ret;
+
+	ret = i2c_master_send(client, (u8 *)&reg_le, sizeof(reg_le));
+	if (ret != sizeof(reg_le))
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static bool zinitix_init_touch(struct bt541_ts_data *bt541)
+{
+	struct i2c_client *client = bt541->client;
+	int i;
+	int error;
+
+	error = zinitix_write_cmd(client, BT541_SWRESET_CMD);
+	if (error) {
+		dev_err(&client->dev, "Failed to write reset command\n");
+		return error;
+	}
+
+	error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to reset interrupt enable flag\n");
+		return error;
+	}
+
+	/* initialize */
+	error = zinitix_write_u16(client, BT541_X_RESOLUTION,
+				  bt541->prop.max_x);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, BT541_Y_RESOLUTION,
+				  bt541->prop.max_y);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM,
+				  MAX_SUPPORTED_FINGER_NUM);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE,
+				  bt541->zinitix_mode);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, BT541_TOUCH_MODE,
+				  bt541->zinitix_mode);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG,
+				  BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE |
+					BIT_UP);
+	if (error)
+		return error;
+
+	/* clear queue */
+	for (i = 0; i < 10; i++) {
+		zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD);
+		udelay(10);
+	}
+
+	return 0;
+}
+
+static int zinitix_init_regulators(struct bt541_ts_data *bt541)
+{
+	struct i2c_client *client = bt541->client;
+	int error;
+
+	bt541->supplies[0].supply = "vdd";
+	bt541->supplies[1].supply = "vddo";
+	error = devm_regulator_bulk_get(&client->dev,
+					ARRAY_SIZE(bt541->supplies),
+					bt541->supplies);
+	if (error < 0) {
+		dev_err(&client->dev, "Failed to get regulators: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
+{
+	int error;
+	struct i2c_client *client = bt541->client;
+
+	error = zinitix_write_u16(client, 0xc000, 0x0001);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence(vendor cmd enable)\n");
+		return error;
+	}
+	udelay(10);
+
+	error = zinitix_write_cmd(client, 0xc004);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence (intn clear)\n");
+		return error;
+	}
+	udelay(10);
+
+	error = zinitix_write_u16(client, 0xc002, 0x0001);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence (nvm init)\n");
+		return error;
+	}
+	mdelay(2);
+
+	error = zinitix_write_u16(client, 0xc001, 0x0001);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence (program start)\n");
+		return error;
+	}
+	msleep(FIRMWARE_ON_DELAY);
+
+	return 0;
+}
+
+static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot,
+				  const struct point_coord *p)
+{
+	input_mt_slot(bt541->input_dev, slot);
+	input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true);
+	touchscreen_report_pos(bt541->input_dev, &bt541->prop,
+			       le16_to_cpu(p->x), le16_to_cpu(p->y), true);
+	input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width);
+}
+
+static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
+{
+	struct bt541_ts_data *bt541 = bt541_handler;
+	struct i2c_client *client = bt541->client;
+	struct touch_event touch_event;
+	int error;
+	int i;
+
+	memset(&touch_event, 0, sizeof(struct touch_event));
+
+	error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG,
+				  &touch_event, sizeof(struct touch_event));
+	if (error) {
+		dev_err(&client->dev, "Failed to read in touchpoint struct\n");
+		goto out;
+	}
+
+	for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++)
+		if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST)
+			zinitix_report_finger(bt541, i,
+					      &touch_event.point_coord[i]);
+
+	input_mt_sync_frame(bt541->input_dev);
+	input_sync(bt541->input_dev);
+
+out:
+	zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD);
+	return IRQ_HANDLED;
+}
+
+static int zinitix_start(struct bt541_ts_data *bt541)
+{
+	int error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(bt541->supplies),
+				      bt541->supplies);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to enable regulators: %d\n", error);
+		return error;
+	}
+
+	msleep(CHIP_ON_DELAY);
+
+	error = zinitix_send_power_on_sequence(bt541);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Error while sending power-on sequence: %d\n", error);
+		return error;
+	}
+
+	error = zinitix_init_touch(bt541);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Error while configuring touch IC\n");
+		return error;
+	}
+
+	enable_irq(bt541->client->irq);
+
+	return 0;
+}
+
+static int zinitix_stop(struct bt541_ts_data *bt541)
+{
+	int error;
+
+	disable_irq(bt541->client->irq);
+
+	error = regulator_bulk_disable(ARRAY_SIZE(bt541->supplies),
+				       bt541->supplies);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to disable regulators: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int zinitix_input_open(struct input_dev *dev)
+{
+	struct bt541_ts_data *bt541 = input_get_drvdata(dev);
+
+	return zinitix_start(bt541);
+}
+
+static void zinitix_input_close(struct input_dev *dev)
+{
+	struct bt541_ts_data *bt541 = input_get_drvdata(dev);
+
+	zinitix_stop(bt541);
+}
+
+static int zinitix_init_input_dev(struct bt541_ts_data *bt541)
+{
+	struct input_dev *input_dev;
+	int error;
+
+	input_dev = devm_input_allocate_device(&bt541->client->dev);
+	if (!input_dev) {
+		dev_err(&bt541->client->dev,
+			"Failed to allocate input device.");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(input_dev, bt541);
+	bt541->input_dev = input_dev;
+
+	input_dev->name = "Zinitix Capacitive TouchScreen";
+	input_dev->phys = "input/ts";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->open = zinitix_input_open;
+	input_dev->close = zinitix_input_close;
+
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+	input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+	touchscreen_parse_properties(input_dev, true, &bt541->prop);
+	if (!bt541->prop.max_x || !bt541->prop.max_y) {
+		dev_err(&bt541->client->dev,
+			"Touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
+		return -EINVAL;
+	}
+
+	error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to initialize MT slots: %d", error);
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to register input device: %d", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int zinitix_ts_probe(struct i2c_client *client)
+{
+	struct bt541_ts_data *bt541;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev,
+			"Failed to assert adapter's support for plain I2C.\n");
+		return -ENXIO;
+	}
+
+	bt541 = devm_kzalloc(&client->dev, sizeof(*bt541), GFP_KERNEL);
+	if (!bt541)
+		return -ENOMEM;
+
+	bt541->client = client;
+	i2c_set_clientdata(client, bt541);
+
+	error = zinitix_init_regulators(bt541);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to initialize regulators: %d\n", error);
+		return error;
+	}
+
+	error = zinitix_init_input_dev(bt541);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to initialize input device: %d\n", error);
+		return error;
+	}
+
+	error = device_property_read_u32(&client->dev, "zinitix,mode",
+					 &bt541->zinitix_mode);
+	if (error < 0) {
+		/* fall back to mode 2 */
+		bt541->zinitix_mode = DEFAULT_TOUCH_POINT_MODE;
+	}
+
+	if (bt541->zinitix_mode != 2) {
+		/*
+		 * If there are devices that don't support mode 2, support
+		 * for other modes (0, 1) will be needed.
+		 */
+		dev_err(&client->dev,
+			"Malformed zinitix,mode property, must be 2 (supplied: %d)\n",
+			bt541->zinitix_mode);
+		return -EINVAL;
+	}
+
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, zinitix_ts_irq_handler,
+					  IRQF_ONESHOT, client->name, bt541);
+	if (error) {
+		dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused zinitix_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bt541_ts_data *bt541 = i2c_get_clientdata(client);
+
+	mutex_lock(&bt541->input_dev->mutex);
+
+	if (bt541->input_dev->users)
+		zinitix_stop(bt541);
+
+	mutex_unlock(&bt541->input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused zinitix_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bt541_ts_data *bt541 = i2c_get_clientdata(client);
+	int ret = 0;
+
+	mutex_lock(&bt541->input_dev->mutex);
+
+	if (bt541->input_dev->users)
+		ret = zinitix_start(bt541);
+
+	mutex_unlock(&bt541->input_dev->mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id zinitix_of_match[] = {
+	{ .compatible = "zinitix,bt541" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, zinitix_of_match);
+#endif
+
+static struct i2c_driver zinitix_ts_driver = {
+	.probe_new = zinitix_ts_probe,
+	.driver = {
+		.name = "Zinitix-TS",
+		.pm = &zinitix_pm_ops,
+		.of_match_table = of_match_ptr(zinitix_of_match),
+	},
+};
+module_i2c_driver(zinitix_ts_driver);
+
+MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>");
+MODULE_DESCRIPTION("Zinitix touchscreen driver");
+MODULE_LICENSE("GPL v2");