Merge branch 'master' into for-next

Conflicts:
	drivers/devfreq/exynos4_bus.c

Sync with Linus' tree to be able to apply patches that are
against newer code (mvneta).

12 files changed, 2343 insertions, 0 deletions

diff --git a/drivers/ipack/Kconfig b/drivers/ipack/Kconfig
new file mode 100644
index 000000000000..3949e5589560
--- /dev/null
+++ b/drivers/ipack/Kconfig
@@ -0,0 +1,24 @@
+#
+# IPACK configuration.
+#
+
+menuconfig IPACK_BUS
+	tristate "IndustryPack bus support"
+	depends on HAS_IOMEM
+	---help---
+	  This option provides support for the IndustryPack framework.  There
+	  are IndustryPack carrier boards, which interface another bus (such as
+	  PCI) to an IndustryPack bus, and IndustryPack modules, that are
+	  hosted on these buses.  While IndustryPack modules can provide a
+	  large variety of functionality, they are most often found in
+	  industrial control applications.
+
+	  Say N if unsure.
+
+if IPACK_BUS
+
+source "drivers/ipack/carriers/Kconfig"
+
+source "drivers/ipack/devices/Kconfig"
+
+endif # IPACK
diff --git a/drivers/ipack/Makefile b/drivers/ipack/Makefile
new file mode 100644
index 000000000000..6f14ade0f8f3
--- /dev/null
+++ b/drivers/ipack/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the IPACK bridge device drivers.
+#
+obj-$(CONFIG_IPACK_BUS)		+= ipack.o
+obj-y				+= devices/
+obj-y				+= carriers/
diff --git a/drivers/ipack/carriers/Kconfig b/drivers/ipack/carriers/Kconfig
new file mode 100644
index 000000000000..922ff5c35acc
--- /dev/null
+++ b/drivers/ipack/carriers/Kconfig
@@ -0,0 +1,7 @@
+config BOARD_TPCI200
+	tristate "Support for the TEWS TPCI-200 IndustryPack carrier board"
+	depends on IPACK_BUS
+	depends on PCI
+	help
+	  This driver adds support for the TEWS TPCI200 IndustryPack carrier board.
+	default n
diff --git a/drivers/ipack/carriers/Makefile b/drivers/ipack/carriers/Makefile
new file mode 100644
index 000000000000..d8b76459300f
--- /dev/null
+++ b/drivers/ipack/carriers/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o
diff --git a/drivers/ipack/carriers/tpci200.c b/drivers/ipack/carriers/tpci200.c
new file mode 100644
index 000000000000..0246b1fddffe
--- /dev/null
+++ b/drivers/ipack/carriers/tpci200.c
@@ -0,0 +1,627 @@
+/**
+ * tpci200.c
+ *
+ * driver for the TEWS TPCI-200 device
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include "tpci200.h"
+
+static const u16 tpci200_status_timeout[] = {
+	TPCI200_A_TIMEOUT,
+	TPCI200_B_TIMEOUT,
+	TPCI200_C_TIMEOUT,
+	TPCI200_D_TIMEOUT,
+};
+
+static const u16 tpci200_status_error[] = {
+	TPCI200_A_ERROR,
+	TPCI200_B_ERROR,
+	TPCI200_C_ERROR,
+	TPCI200_D_ERROR,
+};
+
+static const size_t tpci200_space_size[IPACK_SPACE_COUNT] = {
+	[IPACK_IO_SPACE]    = TPCI200_IO_SPACE_SIZE,
+	[IPACK_ID_SPACE]    = TPCI200_ID_SPACE_SIZE,
+	[IPACK_INT_SPACE]   = TPCI200_INT_SPACE_SIZE,
+	[IPACK_MEM8_SPACE]  = TPCI200_MEM8_SPACE_SIZE,
+	[IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_SIZE,
+};
+
+static const size_t tpci200_space_interval[IPACK_SPACE_COUNT] = {
+	[IPACK_IO_SPACE]    = TPCI200_IO_SPACE_INTERVAL,
+	[IPACK_ID_SPACE]    = TPCI200_ID_SPACE_INTERVAL,
+	[IPACK_INT_SPACE]   = TPCI200_INT_SPACE_INTERVAL,
+	[IPACK_MEM8_SPACE]  = TPCI200_MEM8_SPACE_INTERVAL,
+	[IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_INTERVAL,
+};
+
+static struct tpci200_board *check_slot(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200;
+
+	if (dev == NULL)
+		return NULL;
+
+
+	tpci200 = dev_get_drvdata(dev->bus->parent);
+
+	if (tpci200 == NULL) {
+		dev_info(&dev->dev, "carrier board not found\n");
+		return NULL;
+	}
+
+	if (dev->slot >= TPCI200_NB_SLOT) {
+		dev_info(&dev->dev,
+			 "Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+			 dev->bus->bus_nr, dev->slot, TPCI200_NB_SLOT-1);
+		return NULL;
+	}
+
+	return tpci200;
+}
+
+static void tpci200_clear_mask(struct tpci200_board *tpci200,
+			       __le16 __iomem *addr, u16 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&tpci200->regs_lock, flags);
+	iowrite16(ioread16(addr) & (~mask), addr);
+	spin_unlock_irqrestore(&tpci200->regs_lock, flags);
+}
+
+static void tpci200_set_mask(struct tpci200_board *tpci200,
+			     __le16 __iomem *addr, u16 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&tpci200->regs_lock, flags);
+	iowrite16(ioread16(addr) | mask, addr);
+	spin_unlock_irqrestore(&tpci200->regs_lock, flags);
+}
+
+static void tpci200_unregister(struct tpci200_board *tpci200)
+{
+	free_irq(tpci200->info->pdev->irq, (void *) tpci200);
+
+	pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+	pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
+
+	pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);
+
+	pci_disable_device(tpci200->info->pdev);
+	pci_dev_put(tpci200->info->pdev);
+}
+
+static void tpci200_enable_irq(struct tpci200_board *tpci200,
+			       int islot)
+{
+	tpci200_set_mask(tpci200,
+			&tpci200->info->interface_regs->control[islot],
+			TPCI200_INT0_EN | TPCI200_INT1_EN);
+}
+
+static void tpci200_disable_irq(struct tpci200_board *tpci200,
+				int islot)
+{
+	tpci200_clear_mask(tpci200,
+			&tpci200->info->interface_regs->control[islot],
+			TPCI200_INT0_EN | TPCI200_INT1_EN);
+}
+
+static irqreturn_t tpci200_slot_irq(struct slot_irq *slot_irq)
+{
+	irqreturn_t ret;
+
+	if (!slot_irq)
+		return -ENODEV;
+	ret = slot_irq->handler(slot_irq->arg);
+
+	return ret;
+}
+
+static irqreturn_t tpci200_interrupt(int irq, void *dev_id)
+{
+	struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id;
+	struct slot_irq *slot_irq;
+	irqreturn_t ret;
+	u16 status_reg;
+	int i;
+
+	/* Read status register */
+	status_reg = ioread16(&tpci200->info->interface_regs->status);
+
+	/* Did we cause the interrupt? */
+	if (!(status_reg & TPCI200_SLOT_INT_MASK))
+		return IRQ_NONE;
+
+	/* callback to the IRQ handler for the corresponding slot */
+	rcu_read_lock();
+	for (i = 0; i < TPCI200_NB_SLOT; i++) {
+		if (!(status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2 * i))))
+			continue;
+		slot_irq = rcu_dereference(tpci200->slots[i].irq);
+		ret = tpci200_slot_irq(slot_irq);
+		if (ret == -ENODEV) {
+			dev_info(&tpci200->info->pdev->dev,
+				 "No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n",
+				 tpci200->number, i);
+			tpci200_disable_irq(tpci200, i);
+		}
+	}
+	rcu_read_unlock();
+
+	return IRQ_HANDLED;
+}
+
+static int tpci200_free_irq(struct ipack_device *dev)
+{
+	struct slot_irq *slot_irq;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&tpci200->mutex))
+		return -ERESTARTSYS;
+
+	if (tpci200->slots[dev->slot].irq == NULL) {
+		mutex_unlock(&tpci200->mutex);
+		return -EINVAL;
+	}
+
+	tpci200_disable_irq(tpci200, dev->slot);
+	slot_irq = tpci200->slots[dev->slot].irq;
+	/* uninstall handler */
+	RCU_INIT_POINTER(tpci200->slots[dev->slot].irq, NULL);
+	synchronize_rcu();
+	kfree(slot_irq);
+	mutex_unlock(&tpci200->mutex);
+	return 0;
+}
+
+static int tpci200_request_irq(struct ipack_device *dev,
+			       irqreturn_t (*handler)(void *), void *arg)
+{
+	int res = 0;
+	struct slot_irq *slot_irq;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&tpci200->mutex))
+		return -ERESTARTSYS;
+
+	if (tpci200->slots[dev->slot].irq != NULL) {
+		dev_err(&dev->dev,
+			"Slot [%d:%d] IRQ already registered !\n",
+			dev->bus->bus_nr,
+			dev->slot);
+		res = -EINVAL;
+		goto out_unlock;
+	}
+
+	slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL);
+	if (slot_irq == NULL) {
+		dev_err(&dev->dev,
+			"Slot [%d:%d] unable to allocate memory for IRQ !\n",
+			dev->bus->bus_nr, dev->slot);
+		res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	/*
+	 * WARNING: Setup Interrupt Vector in the IndustryPack device
+	 * before an IRQ request.
+	 * Read the User Manual of your IndustryPack device to know
+	 * where to write the vector in memory.
+	 */
+	slot_irq->handler = handler;
+	slot_irq->arg = arg;
+	slot_irq->holder = dev;
+
+	rcu_assign_pointer(tpci200->slots[dev->slot].irq, slot_irq);
+	tpci200_enable_irq(tpci200, dev->slot);
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+	return res;
+}
+
+static int tpci200_register(struct tpci200_board *tpci200)
+{
+	int i;
+	int res;
+	phys_addr_t ioidint_base;
+	unsigned short slot_ctrl;
+
+	if (pci_enable_device(tpci200->info->pdev) < 0)
+		return -ENODEV;
+
+	/* Request IP interface register (Bar 2) */
+	res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR,
+				 "Carrier IP interface registers");
+	if (res) {
+		dev_err(&tpci200->info->pdev->dev,
+			"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !",
+			tpci200->info->pdev->bus->number,
+			tpci200->info->pdev->devfn);
+		goto out_disable_pci;
+	}
+
+	/* Request IO ID INT space (Bar 3) */
+	res = pci_request_region(tpci200->info->pdev,
+				 TPCI200_IO_ID_INT_SPACES_BAR,
+				 "Carrier IO ID INT space");
+	if (res) {
+		dev_err(&tpci200->info->pdev->dev,
+			"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !",
+			tpci200->info->pdev->bus->number,
+			tpci200->info->pdev->devfn);
+		goto out_release_ip_space;
+	}
+
+	/* Request MEM8 space (Bar 5) */
+	res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR,
+				 "Carrier MEM8 space");
+	if (res) {
+		dev_err(&tpci200->info->pdev->dev,
+			"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!",
+			tpci200->info->pdev->bus->number,
+			tpci200->info->pdev->devfn);
+		goto out_release_ioid_int_space;
+	}
+
+	/* Request MEM16 space (Bar 4) */
+	res = pci_request_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR,
+				 "Carrier MEM16 space");
+	if (res) {
+		dev_err(&tpci200->info->pdev->dev,
+			"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!",
+			tpci200->info->pdev->bus->number,
+			tpci200->info->pdev->devfn);
+		goto out_release_mem8_space;
+	}
+
+	/* Map internal tpci200 driver user space */
+	tpci200->info->interface_regs =
+		ioremap_nocache(pci_resource_start(tpci200->info->pdev,
+					   TPCI200_IP_INTERFACE_BAR),
+			TPCI200_IFACE_SIZE);
+
+	/* Initialize lock that protects interface_regs */
+	spin_lock_init(&tpci200->regs_lock);
+
+	ioidint_base = pci_resource_start(tpci200->info->pdev,
+					  TPCI200_IO_ID_INT_SPACES_BAR);
+	tpci200->mod_mem[IPACK_IO_SPACE] = ioidint_base + TPCI200_IO_SPACE_OFF;
+	tpci200->mod_mem[IPACK_ID_SPACE] = ioidint_base + TPCI200_ID_SPACE_OFF;
+	tpci200->mod_mem[IPACK_INT_SPACE] =
+		ioidint_base + TPCI200_INT_SPACE_OFF;
+	tpci200->mod_mem[IPACK_MEM8_SPACE] =
+		pci_resource_start(tpci200->info->pdev,
+				   TPCI200_MEM8_SPACE_BAR);
+	tpci200->mod_mem[IPACK_MEM16_SPACE] =
+		pci_resource_start(tpci200->info->pdev,
+				   TPCI200_MEM16_SPACE_BAR);
+
+	/* Set the default parameters of the slot
+	 * INT0 disabled, level sensitive
+	 * INT1 disabled, level sensitive
+	 * error interrupt disabled
+	 * timeout interrupt disabled
+	 * recover time disabled
+	 * clock rate 8 MHz
+	 */
+	slot_ctrl = 0;
+	for (i = 0; i < TPCI200_NB_SLOT; i++)
+		writew(slot_ctrl, &tpci200->info->interface_regs->control[i]);
+
+	res = request_irq(tpci200->info->pdev->irq,
+			  tpci200_interrupt, IRQF_SHARED,
+			  KBUILD_MODNAME, (void *) tpci200);
+	if (res) {
+		dev_err(&tpci200->info->pdev->dev,
+			"(bn 0x%X, sn 0x%X) unable to register IRQ !",
+			tpci200->info->pdev->bus->number,
+			tpci200->info->pdev->devfn);
+		goto out_release_ioid_int_space;
+	}
+
+	return 0;
+
+out_release_mem8_space:
+	pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+out_release_ioid_int_space:
+	pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+out_release_ip_space:
+	pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+out_disable_pci:
+	pci_disable_device(tpci200->info->pdev);
+	return res;
+}
+
+static int tpci200_get_clockrate(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200 = check_slot(dev);
+	__le16 __iomem *addr;
+
+	if (!tpci200)
+		return -ENODEV;
+
+	addr = &tpci200->info->interface_regs->control[dev->slot];
+	return (ioread16(addr) & TPCI200_CLK32) ? 32 : 8;
+}
+
+static int tpci200_set_clockrate(struct ipack_device *dev, int mherz)
+{
+	struct tpci200_board *tpci200 = check_slot(dev);
+	__le16 __iomem *addr;
+
+	if (!tpci200)
+		return -ENODEV;
+
+	addr = &tpci200->info->interface_regs->control[dev->slot];
+
+	switch (mherz) {
+	case 8:
+		tpci200_clear_mask(tpci200, addr, TPCI200_CLK32);
+		break;
+	case 32:
+		tpci200_set_mask(tpci200, addr, TPCI200_CLK32);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int tpci200_get_error(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200 = check_slot(dev);
+	__le16 __iomem *addr;
+	u16 mask;
+
+	if (!tpci200)
+		return -ENODEV;
+
+	addr = &tpci200->info->interface_regs->status;
+	mask = tpci200_status_error[dev->slot];
+	return (ioread16(addr) & mask) ? 1 : 0;
+}
+
+static int tpci200_get_timeout(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200 = check_slot(dev);
+	__le16 __iomem *addr;
+	u16 mask;
+
+	if (!tpci200)
+		return -ENODEV;
+
+	addr = &tpci200->info->interface_regs->status;
+	mask = tpci200_status_timeout[dev->slot];
+
+	return (ioread16(addr) & mask) ? 1 : 0;
+}
+
+static int tpci200_reset_timeout(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200 = check_slot(dev);
+	__le16 __iomem *addr;
+	u16 mask;
+
+	if (!tpci200)
+		return -ENODEV;
+
+	addr = &tpci200->info->interface_regs->status;
+	mask = tpci200_status_timeout[dev->slot];
+
+	iowrite16(mask, addr);
+	return 0;
+}
+
+static void tpci200_uninstall(struct tpci200_board *tpci200)
+{
+	tpci200_unregister(tpci200);
+	kfree(tpci200->slots);
+}
+
+static const struct ipack_bus_ops tpci200_bus_ops = {
+	.request_irq = tpci200_request_irq,
+	.free_irq = tpci200_free_irq,
+	.get_clockrate = tpci200_get_clockrate,
+	.set_clockrate = tpci200_set_clockrate,
+	.get_error     = tpci200_get_error,
+	.get_timeout   = tpci200_get_timeout,
+	.reset_timeout = tpci200_reset_timeout,
+};
+
+static int tpci200_install(struct tpci200_board *tpci200)
+{
+	int res;
+
+	tpci200->slots = kzalloc(
+		TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL);
+	if (tpci200->slots == NULL)
+		return -ENOMEM;
+
+	res = tpci200_register(tpci200);
+	if (res) {
+		kfree(tpci200->slots);
+		tpci200->slots = NULL;
+		return res;
+	}
+
+	mutex_init(&tpci200->mutex);
+	return 0;
+}
+
+static void tpci200_release_device(struct ipack_device *dev)
+{
+	kfree(dev);
+}
+
+static int tpci200_create_device(struct tpci200_board *tpci200, int i)
+{
+	enum ipack_space space;
+	struct ipack_device *dev =
+		kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+	dev->slot = i;
+	dev->bus = tpci200->info->ipack_bus;
+	dev->release = tpci200_release_device;
+
+	for (space = 0; space < IPACK_SPACE_COUNT; space++) {
+		dev->region[space].start =
+			tpci200->mod_mem[space]
+			+ tpci200_space_interval[space] * i;
+		dev->region[space].size = tpci200_space_size[space];
+	}
+	return ipack_device_register(dev);
+}
+
+static int tpci200_pci_probe(struct pci_dev *pdev,
+			     const struct pci_device_id *id)
+{
+	int ret, i;
+	struct tpci200_board *tpci200;
+	u32 reg32;
+
+	tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL);
+	if (!tpci200)
+		return -ENOMEM;
+
+	tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
+	if (!tpci200->info) {
+		ret = -ENOMEM;
+		goto out_err_info;
+	}
+
+	pci_dev_get(pdev);
+
+	/* Obtain a mapping of the carrier's PCI configuration registers */
+	ret = pci_request_region(pdev, TPCI200_CFG_MEM_BAR,
+				 KBUILD_MODNAME " Configuration Memory");
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory");
+		ret = -EBUSY;
+		goto out_err_pci_request;
+	}
+	tpci200->info->cfg_regs = ioremap_nocache(
+			pci_resource_start(pdev, TPCI200_CFG_MEM_BAR),
+			pci_resource_len(pdev, TPCI200_CFG_MEM_BAR));
+	if (!tpci200->info->cfg_regs) {
+		dev_err(&pdev->dev, "Failed to map PCI Configuration Memory");
+		ret = -EFAULT;
+		goto out_err_ioremap;
+	}
+
+	/* Disable byte swapping for 16 bit IP module access. This will ensure
+	 * that the Industrypack big endian byte order is preserved by the
+	 * carrier. */
+	reg32 = ioread32(tpci200->info->cfg_regs + LAS1_DESC);
+	reg32 |= 1 << LAS_BIT_BIGENDIAN;
+	iowrite32(reg32, tpci200->info->cfg_regs + LAS1_DESC);
+
+	reg32 = ioread32(tpci200->info->cfg_regs + LAS2_DESC);
+	reg32 |= 1 << LAS_BIT_BIGENDIAN;
+	iowrite32(reg32, tpci200->info->cfg_regs + LAS2_DESC);
+
+	/* Save struct pci_dev pointer */
+	tpci200->info->pdev = pdev;
+	tpci200->info->id_table = (struct pci_device_id *)id;
+
+	/* register the device and initialize it */
+	ret = tpci200_install(tpci200);
+	if (ret) {
+		dev_err(&pdev->dev, "error during tpci200 install\n");
+		ret = -ENODEV;
+		goto out_err_install;
+	}
+
+	/* Register the carrier in the industry pack bus driver */
+	tpci200->info->ipack_bus = ipack_bus_register(&pdev->dev,
+						      TPCI200_NB_SLOT,
+						      &tpci200_bus_ops);
+	if (!tpci200->info->ipack_bus) {
+		dev_err(&pdev->dev,
+			"error registering the carrier on ipack driver\n");
+		ret = -EFAULT;
+		goto out_err_bus_register;
+	}
+
+	/* save the bus number given by ipack to logging purpose */
+	tpci200->number = tpci200->info->ipack_bus->bus_nr;
+	dev_set_drvdata(&pdev->dev, tpci200);
+
+	for (i = 0; i < TPCI200_NB_SLOT; i++)
+		tpci200_create_device(tpci200, i);
+	return 0;
+
+out_err_bus_register:
+	tpci200_uninstall(tpci200);
+out_err_install:
+	iounmap(tpci200->info->cfg_regs);
+out_err_ioremap:
+	pci_release_region(pdev, TPCI200_CFG_MEM_BAR);
+out_err_pci_request:
+	pci_dev_put(pdev);
+	kfree(tpci200->info);
+out_err_info:
+	kfree(tpci200);
+	return ret;
+}
+
+static void __tpci200_pci_remove(struct tpci200_board *tpci200)
+{
+	ipack_bus_unregister(tpci200->info->ipack_bus);
+	tpci200_uninstall(tpci200);
+
+	kfree(tpci200->info);
+	kfree(tpci200);
+}
+
+static void tpci200_pci_remove(struct pci_dev *dev)
+{
+	struct tpci200_board *tpci200 = pci_get_drvdata(dev);
+
+	__tpci200_pci_remove(tpci200);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(tpci200_idtable) = {
+	{ TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID,
+	  TPCI200_SUBDEVICE_ID },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, tpci200_idtable);
+
+static struct pci_driver tpci200_pci_drv = {
+	.name = "tpci200",
+	.id_table = tpci200_idtable,
+	.probe = tpci200_pci_probe,
+	.remove = tpci200_pci_remove,
+};
+
+module_pci_driver(tpci200_pci_drv);
+
+MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ipack/carriers/tpci200.h b/drivers/ipack/carriers/tpci200.h
new file mode 100644
index 000000000000..a7a151dab83c
--- /dev/null
+++ b/drivers/ipack/carriers/tpci200.h
@@ -0,0 +1,167 @@
+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+#include <linux/ipack.h>
+
+#define TPCI200_NB_SLOT               0x4
+#define TPCI200_NB_BAR                0x6
+
+#define TPCI200_VENDOR_ID             0x1498
+#define TPCI200_DEVICE_ID             0x30C8
+#define TPCI200_SUBVENDOR_ID          0x1498
+#define TPCI200_SUBDEVICE_ID          0x300A
+
+#define TPCI200_CFG_MEM_BAR           0
+#define TPCI200_IP_INTERFACE_BAR      2
+#define TPCI200_IO_ID_INT_SPACES_BAR  3
+#define TPCI200_MEM16_SPACE_BAR       4
+#define TPCI200_MEM8_SPACE_BAR        5
+
+struct tpci200_regs {
+	__le16	revision;
+	/* writes to control should occur with the mutex held to protect
+	 * read-modify-write operations */
+	__le16  control[4];
+	__le16	reset;
+	__le16	status;
+	u8	reserved[242];
+} __packed;
+
+#define TPCI200_IFACE_SIZE            0x100
+
+#define TPCI200_IO_SPACE_OFF          0x0000
+#define TPCI200_IO_SPACE_INTERVAL     0x0100
+#define TPCI200_IO_SPACE_SIZE         0x0080
+#define TPCI200_ID_SPACE_OFF          0x0080
+#define TPCI200_ID_SPACE_INTERVAL     0x0100
+#define TPCI200_ID_SPACE_SIZE         0x0040
+#define TPCI200_INT_SPACE_OFF         0x00C0
+#define TPCI200_INT_SPACE_INTERVAL    0x0100
+#define TPCI200_INT_SPACE_SIZE        0x0040
+#define TPCI200_IOIDINT_SIZE          0x0400
+
+#define TPCI200_MEM8_SPACE_INTERVAL   0x00400000
+#define TPCI200_MEM8_SPACE_SIZE       0x00400000
+#define TPCI200_MEM16_SPACE_INTERVAL  0x00800000
+#define TPCI200_MEM16_SPACE_SIZE      0x00800000
+
+/* control field in tpci200_regs */
+#define TPCI200_INT0_EN               0x0040
+#define TPCI200_INT1_EN               0x0080
+#define TPCI200_INT0_EDGE             0x0010
+#define TPCI200_INT1_EDGE             0x0020
+#define TPCI200_ERR_INT_EN            0x0008
+#define TPCI200_TIME_INT_EN           0x0004
+#define TPCI200_RECOVER_EN            0x0002
+#define TPCI200_CLK32                 0x0001
+
+/* reset field in tpci200_regs */
+#define TPCI200_A_RESET               0x0001
+#define TPCI200_B_RESET               0x0002
+#define TPCI200_C_RESET               0x0004
+#define TPCI200_D_RESET               0x0008
+
+/* status field in tpci200_regs */
+#define TPCI200_A_TIMEOUT             0x1000
+#define TPCI200_B_TIMEOUT             0x2000
+#define TPCI200_C_TIMEOUT             0x4000
+#define TPCI200_D_TIMEOUT             0x8000
+
+#define TPCI200_A_ERROR               0x0100
+#define TPCI200_B_ERROR               0x0200
+#define TPCI200_C_ERROR               0x0400
+#define TPCI200_D_ERROR               0x0800
+
+#define TPCI200_A_INT0                0x0001
+#define TPCI200_A_INT1                0x0002
+#define TPCI200_B_INT0                0x0004
+#define TPCI200_B_INT1                0x0008
+#define TPCI200_C_INT0                0x0010
+#define TPCI200_C_INT1                0x0020
+#define TPCI200_D_INT0                0x0040
+#define TPCI200_D_INT1                0x0080
+
+#define TPCI200_SLOT_INT_MASK         0x00FF
+
+/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */
+#define LAS1_DESC		      0x2C
+#define LAS2_DESC		      0x30
+
+/* Bits in the LAS?_DESC registers */
+#define LAS_BIT_BIGENDIAN	      24
+
+#define VME_IOID_SPACE  "IOID"
+#define VME_MEM_SPACE  "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector	Vector number
+ * @handler	Handler called when IRQ arrives
+ * @arg		Handler argument
+ *
+ */
+struct slot_irq {
+	struct ipack_device *holder;
+	int		vector;
+	irqreturn_t	(*handler)(void *);
+	void		*arg;
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id	Slot identification gived to external interface
+ * @irq		Slot IRQ infos
+ * @io_phys	IO physical base address register of the slot
+ * @id_phys	ID physical base address register of the slot
+ * @int_phys	INT physical base address register of the slot
+ * @mem_phys	MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+	struct slot_irq	    *irq;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev		PCI device
+ * @interface_regs	Pointer to IP interface space (Bar 2)
+ * @ioidint_space	Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space		Pointer to MEM space (Bar 4)
+ *
+ */
+struct tpci200_infos {
+	struct pci_dev			*pdev;
+	struct pci_device_id		*id_table;
+	struct tpci200_regs __iomem	*interface_regs;
+	void __iomem			*cfg_regs;
+	struct ipack_bus_device		*ipack_bus;
+};
+struct tpci200_board {
+	unsigned int		number;
+	struct mutex		mutex;
+	spinlock_t		regs_lock;
+	struct tpci200_slot	*slots;
+	struct tpci200_infos	*info;
+	phys_addr_t             mod_mem[IPACK_SPACE_COUNT];
+};
+
+#endif /* _TPCI200_H_ */
diff --git a/drivers/ipack/devices/Kconfig b/drivers/ipack/devices/Kconfig
new file mode 100644
index 000000000000..0b82fdc198c0
--- /dev/null
+++ b/drivers/ipack/devices/Kconfig
@@ -0,0 +1,6 @@
+config SERIAL_IPOCTAL
+	tristate "IndustryPack IP-OCTAL uart support"
+	depends on IPACK_BUS
+	help
+	  This driver supports the IPOCTAL serial port device for the IndustryPack bus.
+	default n
diff --git a/drivers/ipack/devices/Makefile b/drivers/ipack/devices/Makefile
new file mode 100644
index 000000000000..6de18bda4a9a
--- /dev/null
+++ b/drivers/ipack/devices/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SERIAL_IPOCTAL) += ipoctal.o
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
new file mode 100644
index 000000000000..576d53d92677
--- /dev/null
+++ b/drivers/ipack/devices/ipoctal.c
@@ -0,0 +1,753 @@
+/**
+ * ipoctal.c
+ *
+ * driver for the GE IP-OCTAL boards
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+#include <linux/io.h>
+#include <linux/ipack.h>
+#include "ipoctal.h"
+#include "scc2698.h"
+
+#define IP_OCTAL_ID_SPACE_VECTOR    0x41
+#define IP_OCTAL_NB_BLOCKS          4
+
+static const struct tty_operations ipoctal_fops;
+
+struct ipoctal_channel {
+	struct ipoctal_stats		stats;
+	unsigned int			nb_bytes;
+	wait_queue_head_t		queue;
+	spinlock_t			lock;
+	unsigned int			pointer_read;
+	unsigned int			pointer_write;
+	atomic_t			open;
+	struct tty_port			tty_port;
+	union scc2698_channel __iomem	*regs;
+	union scc2698_block __iomem	*block_regs;
+	unsigned int			board_id;
+	unsigned char			*board_write;
+	u8				isr_rx_rdy_mask;
+	u8				isr_tx_rdy_mask;
+};
+
+struct ipoctal {
+	struct ipack_device		*dev;
+	unsigned int			board_id;
+	struct ipoctal_channel		channel[NR_CHANNELS];
+	unsigned char			write;
+	struct tty_driver		*tty_drv;
+	u8 __iomem			*mem8_space;
+	u8 __iomem			*int_space;
+};
+
+static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	struct ipoctal_channel *channel;
+
+	channel = dev_get_drvdata(tty->dev);
+
+	iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+	return 0;
+}
+
+static int ipoctal_open(struct tty_struct *tty, struct file *file)
+{
+	int res;
+	struct ipoctal_channel *channel;
+
+	channel = dev_get_drvdata(tty->dev);
+
+	if (atomic_read(&channel->open))
+		return -EBUSY;
+
+	tty->driver_data = channel;
+
+	res = tty_port_open(&channel->tty_port, tty, file);
+	if (res)
+		return res;
+
+	atomic_inc(&channel->open);
+	return 0;
+}
+
+static void ipoctal_reset_stats(struct ipoctal_stats *stats)
+{
+	stats->tx = 0;
+	stats->rx = 0;
+	stats->rcv_break = 0;
+	stats->framing_err = 0;
+	stats->overrun_err = 0;
+	stats->parity_err = 0;
+}
+
+static void ipoctal_free_channel(struct ipoctal_channel *channel)
+{
+	ipoctal_reset_stats(&channel->stats);
+	channel->pointer_read = 0;
+	channel->pointer_write = 0;
+	channel->nb_bytes = 0;
+}
+
+static void ipoctal_close(struct tty_struct *tty, struct file *filp)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	tty_port_close(&channel->tty_port, tty, filp);
+
+	if (atomic_dec_and_test(&channel->open))
+		ipoctal_free_channel(channel);
+}
+
+static int ipoctal_get_icount(struct tty_struct *tty,
+			      struct serial_icounter_struct *icount)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	icount->cts = 0;
+	icount->dsr = 0;
+	icount->rng = 0;
+	icount->dcd = 0;
+	icount->rx = channel->stats.rx;
+	icount->tx = channel->stats.tx;
+	icount->frame = channel->stats.framing_err;
+	icount->parity = channel->stats.parity_err;
+	icount->brk = channel->stats.rcv_break;
+	return 0;
+}
+
+static void ipoctal_irq_rx(struct ipoctal_channel *channel,
+			   struct tty_struct *tty, u8 sr)
+{
+	unsigned char value;
+	unsigned char flag = TTY_NORMAL;
+	u8 isr;
+
+	do {
+		value = ioread8(&channel->regs->r.rhr);
+		/* Error: count statistics */
+		if (sr & SR_ERROR) {
+			iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+
+			if (sr & SR_OVERRUN_ERROR) {
+				channel->stats.overrun_err++;
+				/* Overrun doesn't affect the current character*/
+				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+			}
+			if (sr & SR_PARITY_ERROR) {
+				channel->stats.parity_err++;
+				flag = TTY_PARITY;
+			}
+			if (sr & SR_FRAMING_ERROR) {
+				channel->stats.framing_err++;
+				flag = TTY_FRAME;
+			}
+			if (sr & SR_RECEIVED_BREAK) {
+				iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr);
+				channel->stats.rcv_break++;
+				flag = TTY_BREAK;
+			}
+		}
+		tty_insert_flip_char(tty, value, flag);
+
+		/* Check if there are more characters in RX FIFO
+		 * If there are more, the isr register for this channel
+		 * has enabled the RxRDY|FFULL bit.
+		 */
+		isr = ioread8(&channel->block_regs->r.isr);
+		sr = ioread8(&channel->regs->r.sr);
+	} while (isr & channel->isr_rx_rdy_mask);
+
+	tty_flip_buffer_push(tty);
+}
+
+static void ipoctal_irq_tx(struct ipoctal_channel *channel)
+{
+	unsigned char value;
+	unsigned int *pointer_write = &channel->pointer_write;
+
+	if (channel->nb_bytes <= 0) {
+		channel->nb_bytes = 0;
+		return;
+	}
+
+	value = channel->tty_port.xmit_buf[*pointer_write];
+	iowrite8(value, &channel->regs->w.thr);
+	channel->stats.tx++;
+	(*pointer_write)++;
+	*pointer_write = *pointer_write % PAGE_SIZE;
+	channel->nb_bytes--;
+
+	if ((channel->nb_bytes == 0) &&
+	    (waitqueue_active(&channel->queue))) {
+
+		if (channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+			*channel->board_write = 1;
+			wake_up_interruptible(&channel->queue);
+		}
+	}
+}
+
+static void ipoctal_irq_channel(struct ipoctal_channel *channel)
+{
+	u8 isr, sr;
+	struct tty_struct *tty;
+
+	/* If there is no client, skip the check */
+	if (!atomic_read(&channel->open))
+		return;
+
+	tty = tty_port_tty_get(&channel->tty_port);
+	if (!tty)
+		return;
+	/* The HW is organized in pair of channels.  See which register we need
+	 * to read from */
+	isr = ioread8(&channel->block_regs->r.isr);
+	sr = ioread8(&channel->regs->r.sr);
+
+	/* In case of RS-485, change from TX to RX when finishing TX.
+	 * Half-duplex. */
+	if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
+	    (sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
+		iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
+		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+		*channel->board_write = 1;
+		wake_up_interruptible(&channel->queue);
+	}
+
+	/* RX data */
+	if ((isr & channel->isr_rx_rdy_mask) && (sr & SR_RX_READY))
+		ipoctal_irq_rx(channel, tty, sr);
+
+	/* TX of each character */
+	if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY))
+		ipoctal_irq_tx(channel);
+
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+static irqreturn_t ipoctal_irq_handler(void *arg)
+{
+	unsigned int i;
+	struct ipoctal *ipoctal = (struct ipoctal *) arg;
+
+	/* Check all channels */
+	for (i = 0; i < NR_CHANNELS; i++)
+		ipoctal_irq_channel(&ipoctal->channel[i]);
+
+	/* Clear the IPack device interrupt */
+	readw(ipoctal->int_space + ACK_INT_REQ0);
+	readw(ipoctal->int_space + ACK_INT_REQ1);
+
+	return IRQ_HANDLED;
+}
+
+static const struct tty_port_operations ipoctal_tty_port_ops = {
+	.dtr_rts = NULL,
+	.activate = ipoctal_port_activate,
+};
+
+static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
+			     unsigned int slot)
+{
+	int res;
+	int i;
+	struct tty_driver *tty;
+	char name[20];
+	struct ipoctal_channel *channel;
+	struct ipack_region *region;
+	void __iomem *addr;
+	union scc2698_channel __iomem *chan_regs;
+	union scc2698_block __iomem *block_regs;
+
+	ipoctal->board_id = ipoctal->dev->id_device;
+
+	region = &ipoctal->dev->region[IPACK_IO_SPACE];
+	addr = devm_ioremap_nocache(&ipoctal->dev->dev,
+				    region->start, region->size);
+	if (!addr) {
+		dev_err(&ipoctal->dev->dev,
+			"Unable to map slot [%d:%d] IO space!\n",
+			bus_nr, slot);
+		return -EADDRNOTAVAIL;
+	}
+	/* Save the virtual address to access the registers easily */
+	chan_regs =
+		(union scc2698_channel __iomem *) addr;
+	block_regs =
+		(union scc2698_block __iomem *) addr;
+
+	region = &ipoctal->dev->region[IPACK_INT_SPACE];
+	ipoctal->int_space =
+		devm_ioremap_nocache(&ipoctal->dev->dev,
+				     region->start, region->size);
+	if (!ipoctal->int_space) {
+		dev_err(&ipoctal->dev->dev,
+			"Unable to map slot [%d:%d] INT space!\n",
+			bus_nr, slot);
+		return -EADDRNOTAVAIL;
+	}
+
+	region = &ipoctal->dev->region[IPACK_MEM8_SPACE];
+	ipoctal->mem8_space =
+		devm_ioremap_nocache(&ipoctal->dev->dev,
+				     region->start, 0x8000);
+	if (!addr) {
+		dev_err(&ipoctal->dev->dev,
+			"Unable to map slot [%d:%d] MEM8 space!\n",
+			bus_nr, slot);
+		return -EADDRNOTAVAIL;
+	}
+
+
+	/* Disable RX and TX before touching anything */
+	for (i = 0; i < NR_CHANNELS ; i++) {
+		struct ipoctal_channel *channel = &ipoctal->channel[i];
+		channel->regs = chan_regs + i;
+		channel->block_regs = block_regs + (i >> 1);
+		channel->board_write = &ipoctal->write;
+		channel->board_id = ipoctal->board_id;
+		if (i & 1) {
+			channel->isr_tx_rdy_mask = ISR_TxRDY_B;
+			channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_B;
+		} else {
+			channel->isr_tx_rdy_mask = ISR_TxRDY_A;
+			channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_A;
+		}
+
+		iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+		iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY,
+			 &channel->regs->w.mr); /* mr1 */
+		iowrite8(0, &channel->regs->w.mr); /* mr2 */
+		iowrite8(TX_CLK_9600  | RX_CLK_9600, &channel->regs->w.csr);
+	}
+
+	for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) {
+		iowrite8(ACR_BRG_SET2, &block_regs[i].w.acr);
+		iowrite8(OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN | OPCR_MPOb_RTSN,
+			 &block_regs[i].w.opcr);
+		iowrite8(IMR_TxRDY_A | IMR_RxRDY_FFULL_A | IMR_DELTA_BREAK_A |
+			 IMR_TxRDY_B | IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B,
+			 &block_regs[i].w.imr);
+	}
+
+	/*
+	 * IP-OCTAL has different addresses to copy its IRQ vector.
+	 * Depending of the carrier these addresses are accesible or not.
+	 * More info in the datasheet.
+	 */
+	ipoctal->dev->bus->ops->request_irq(ipoctal->dev,
+				       ipoctal_irq_handler, ipoctal);
+	/* Dummy write */
+	iowrite8(1, ipoctal->mem8_space + 1);
+
+	/* Register the TTY device */
+
+	/* Each IP-OCTAL channel is a TTY port */
+	tty = alloc_tty_driver(NR_CHANNELS);
+
+	if (!tty)
+		return -ENOMEM;
+
+	/* Fill struct tty_driver with ipoctal data */
+	tty->owner = THIS_MODULE;
+	tty->driver_name = KBUILD_MODNAME;
+	sprintf(name, KBUILD_MODNAME ".%d.%d.", bus_nr, slot);
+	tty->name = name;
+	tty->major = 0;
+
+	tty->minor_start = 0;
+	tty->type = TTY_DRIVER_TYPE_SERIAL;
+	tty->subtype = SERIAL_TYPE_NORMAL;
+	tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty->init_termios = tty_std_termios;
+	tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->init_termios.c_ispeed = 9600;
+	tty->init_termios.c_ospeed = 9600;
+
+	tty_set_operations(tty, &ipoctal_fops);
+	res = tty_register_driver(tty);
+	if (res) {
+		dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n");
+		put_tty_driver(tty);
+		return res;
+	}
+
+	/* Save struct tty_driver for use it when uninstalling the device */
+	ipoctal->tty_drv = tty;
+
+	for (i = 0; i < NR_CHANNELS; i++) {
+		struct device *tty_dev;
+
+		channel = &ipoctal->channel[i];
+		tty_port_init(&channel->tty_port);
+		tty_port_alloc_xmit_buf(&channel->tty_port);
+		channel->tty_port.ops = &ipoctal_tty_port_ops;
+
+		ipoctal_reset_stats(&channel->stats);
+		channel->nb_bytes = 0;
+		init_waitqueue_head(&channel->queue);
+
+		spin_lock_init(&channel->lock);
+		channel->pointer_read = 0;
+		channel->pointer_write = 0;
+		tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL);
+		if (IS_ERR(tty_dev)) {
+			dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n");
+			tty_port_destroy(&channel->tty_port);
+			continue;
+		}
+		dev_set_drvdata(tty_dev, channel);
+
+		/*
+		 * Enable again the RX. TX will be enabled when
+		 * there is something to send
+		 */
+		iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+	}
+
+	return 0;
+}
+
+static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel,
+					    const unsigned char *buf,
+					    int count)
+{
+	unsigned long flags;
+	int i;
+	unsigned int *pointer_read = &channel->pointer_read;
+
+	/* Copy the bytes from the user buffer to the internal one */
+	for (i = 0; i < count; i++) {
+		if (i <= (PAGE_SIZE - channel->nb_bytes)) {
+			spin_lock_irqsave(&channel->lock, flags);
+			channel->tty_port.xmit_buf[*pointer_read] = buf[i];
+			*pointer_read = (*pointer_read + 1) % PAGE_SIZE;
+			channel->nb_bytes++;
+			spin_unlock_irqrestore(&channel->lock, flags);
+		} else {
+			break;
+		}
+	}
+	return i;
+}
+
+static int ipoctal_write_tty(struct tty_struct *tty,
+			     const unsigned char *buf, int count)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+	unsigned int char_copied;
+
+	char_copied = ipoctal_copy_write_buffer(channel, buf, count);
+
+	/* As the IP-OCTAL 485 only supports half duplex, do it manually */
+	if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
+		iowrite8(CR_DISABLE_RX, &channel->regs->w.cr);
+		iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr);
+	}
+
+	/*
+	 * Send a packet and then disable TX to avoid failure after several send
+	 * operations
+	 */
+	iowrite8(CR_ENABLE_TX, &channel->regs->w.cr);
+	wait_event_interruptible(channel->queue, *channel->board_write);
+	iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
+
+	*channel->board_write = 0;
+	return char_copied;
+}
+
+static int ipoctal_write_room(struct tty_struct *tty)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	return PAGE_SIZE - channel->nb_bytes;
+}
+
+static int ipoctal_chars_in_buffer(struct tty_struct *tty)
+{
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	return channel->nb_bytes;
+}
+
+static void ipoctal_set_termios(struct tty_struct *tty,
+				struct ktermios *old_termios)
+{
+	unsigned int cflag;
+	unsigned char mr1 = 0;
+	unsigned char mr2 = 0;
+	unsigned char csr = 0;
+	struct ipoctal_channel *channel = tty->driver_data;
+	speed_t baud;
+
+	cflag = tty->termios.c_cflag;
+
+	/* Disable and reset everything before change the setup */
+	iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
+
+	/* Set Bits per chars */
+	switch (cflag & CSIZE) {
+	case CS6:
+		mr1 |= MR1_CHRL_6_BITS;
+		break;
+	case CS7:
+		mr1 |= MR1_CHRL_7_BITS;
+		break;
+	case CS8:
+	default:
+		mr1 |= MR1_CHRL_8_BITS;
+		/* By default, select CS8 */
+		tty->termios.c_cflag = (cflag & ~CSIZE) | CS8;
+		break;
+	}
+
+	/* Set Parity */
+	if (cflag & PARENB)
+		if (cflag & PARODD)
+			mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD;
+		else
+			mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN;
+	else
+		mr1 |= MR1_PARITY_OFF;
+
+	/* Mark or space parity is not supported */
+	tty->termios.c_cflag &= ~CMSPAR;
+
+	/* Set stop bits */
+	if (cflag & CSTOPB)
+		mr2 |= MR2_STOP_BITS_LENGTH_2;
+	else
+		mr2 |= MR2_STOP_BITS_LENGTH_1;
+
+	/* Set the flow control */
+	switch (channel->board_id) {
+	case IPACK1_DEVICE_ID_SBS_OCTAL_232:
+		if (cflag & CRTSCTS) {
+			mr1 |= MR1_RxRTS_CONTROL_ON;
+			mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
+		} else {
+			mr1 |= MR1_RxRTS_CONTROL_OFF;
+			mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+		}
+		break;
+	case IPACK1_DEVICE_ID_SBS_OCTAL_422:
+		mr1 |= MR1_RxRTS_CONTROL_OFF;
+		mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+		break;
+	case IPACK1_DEVICE_ID_SBS_OCTAL_485:
+		mr1 |= MR1_RxRTS_CONTROL_OFF;
+		mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
+		break;
+	default:
+		return;
+		break;
+	}
+
+	baud = tty_get_baud_rate(tty);
+	tty_termios_encode_baud_rate(&tty->termios, baud, baud);
+
+	/* Set baud rate */
+	switch (baud) {
+	case 75:
+		csr |= TX_CLK_75 | RX_CLK_75;
+		break;
+	case 110:
+		csr |= TX_CLK_110 | RX_CLK_110;
+		break;
+	case 150:
+		csr |= TX_CLK_150 | RX_CLK_150;
+		break;
+	case 300:
+		csr |= TX_CLK_300 | RX_CLK_300;
+		break;
+	case 600:
+		csr |= TX_CLK_600 | RX_CLK_600;
+		break;
+	case 1200:
+		csr |= TX_CLK_1200 | RX_CLK_1200;
+		break;
+	case 1800:
+		csr |= TX_CLK_1800 | RX_CLK_1800;
+		break;
+	case 2000:
+		csr |= TX_CLK_2000 | RX_CLK_2000;
+		break;
+	case 2400:
+		csr |= TX_CLK_2400 | RX_CLK_2400;
+		break;
+	case 4800:
+		csr |= TX_CLK_4800  | RX_CLK_4800;
+		break;
+	case 9600:
+		csr |= TX_CLK_9600  | RX_CLK_9600;
+		break;
+	case 19200:
+		csr |= TX_CLK_19200 | RX_CLK_19200;
+		break;
+	case 38400:
+	default:
+		csr |= TX_CLK_38400 | RX_CLK_38400;
+		/* In case of default, we establish 38400 bps */
+		tty_termios_encode_baud_rate(&tty->termios, 38400, 38400);
+		break;
+	}
+
+	mr1 |= MR1_ERROR_CHAR;
+	mr1 |= MR1_RxINT_RxRDY;
+
+	/* Write the control registers */
+	iowrite8(mr1, &channel->regs->w.mr);
+	iowrite8(mr2, &channel->regs->w.mr);
+	iowrite8(csr, &channel->regs->w.csr);
+
+	/* Enable again the RX */
+	iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
+}
+
+static void ipoctal_hangup(struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct ipoctal_channel *channel = tty->driver_data;
+
+	if (channel == NULL)
+		return;
+
+	spin_lock_irqsave(&channel->lock, flags);
+	channel->nb_bytes = 0;
+	channel->pointer_read = 0;
+	channel->pointer_write = 0;
+	spin_unlock_irqrestore(&channel->lock, flags);
+
+	tty_port_hangup(&channel->tty_port);
+
+	iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
+	iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
+
+	clear_bit(ASYNCB_INITIALIZED, &channel->tty_port.flags);
+	wake_up_interruptible(&channel->tty_port.open_wait);
+}
+
+static const struct tty_operations ipoctal_fops = {
+	.ioctl =		NULL,
+	.open =			ipoctal_open,
+	.close =		ipoctal_close,
+	.write =		ipoctal_write_tty,
+	.set_termios =		ipoctal_set_termios,
+	.write_room =		ipoctal_write_room,
+	.chars_in_buffer =	ipoctal_chars_in_buffer,
+	.get_icount =		ipoctal_get_icount,
+	.hangup =		ipoctal_hangup,
+};
+
+static int ipoctal_probe(struct ipack_device *dev)
+{
+	int res;
+	struct ipoctal *ipoctal;
+
+	ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL);
+	if (ipoctal == NULL)
+		return -ENOMEM;
+
+	ipoctal->dev = dev;
+	res = ipoctal_inst_slot(ipoctal, dev->bus->bus_nr, dev->slot);
+	if (res)
+		goto out_uninst;
+
+	dev_set_drvdata(&dev->dev, ipoctal);
+	return 0;
+
+out_uninst:
+	kfree(ipoctal);
+	return res;
+}
+
+static void __ipoctal_remove(struct ipoctal *ipoctal)
+{
+	int i;
+
+	ipoctal->dev->bus->ops->free_irq(ipoctal->dev);
+
+	for (i = 0; i < NR_CHANNELS; i++) {
+		struct ipoctal_channel *channel = &ipoctal->channel[i];
+		tty_unregister_device(ipoctal->tty_drv, i);
+		tty_port_free_xmit_buf(&channel->tty_port);
+		tty_port_destroy(&channel->tty_port);
+	}
+
+	tty_unregister_driver(ipoctal->tty_drv);
+	put_tty_driver(ipoctal->tty_drv);
+	kfree(ipoctal);
+}
+
+static void ipoctal_remove(struct ipack_device *idev)
+{
+	__ipoctal_remove(dev_get_drvdata(&idev->dev));
+}
+
+static DEFINE_IPACK_DEVICE_TABLE(ipoctal_ids) = {
+	{ IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+			IPACK1_DEVICE_ID_SBS_OCTAL_232) },
+	{ IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+			IPACK1_DEVICE_ID_SBS_OCTAL_422) },
+	{ IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS,
+			IPACK1_DEVICE_ID_SBS_OCTAL_485) },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(ipack, ipoctal_ids);
+
+static const struct ipack_driver_ops ipoctal_drv_ops = {
+	.probe  = ipoctal_probe,
+	.remove = ipoctal_remove,
+};
+
+static struct ipack_driver driver = {
+	.ops      = &ipoctal_drv_ops,
+	.id_table = ipoctal_ids,
+};
+
+static int __init ipoctal_init(void)
+{
+	return ipack_driver_register(&driver, THIS_MODULE, KBUILD_MODNAME);
+}
+
+static void __exit ipoctal_exit(void)
+{
+	ipack_driver_unregister(&driver);
+}
+
+MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver");
+MODULE_LICENSE("GPL");
+
+module_init(ipoctal_init);
+module_exit(ipoctal_exit);
diff --git a/drivers/ipack/devices/ipoctal.h b/drivers/ipack/devices/ipoctal.h
new file mode 100644
index 000000000000..28f1c4233154
--- /dev/null
+++ b/drivers/ipack/devices/ipoctal.h
@@ -0,0 +1,42 @@
+/**
+ * ipoctal.h
+ *
+ * driver for the IPOCTAL boards
+
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef _IPOCTAL_H
+#define _IPOCTAL_H_
+
+#define NR_CHANNELS		8
+#define IPOCTAL_MAX_BOARDS	16
+#define MAX_DEVICES		(NR_CHANNELS * IPOCTAL_MAX_BOARDS)
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/**
+ * struct ipoctal_stats -- Stats since last reset
+ *
+ * @tx: Number of transmitted bytes
+ * @rx: Number of received bytes
+ * @overrun: Number of overrun errors
+ * @parity_err: Number of parity errors
+ * @framing_err: Number of framing errors
+ * @rcv_break: Number of break received
+ */
+struct ipoctal_stats {
+	unsigned long tx;
+	unsigned long rx;
+	unsigned long overrun_err;
+	unsigned long parity_err;
+	unsigned long framing_err;
+	unsigned long rcv_break;
+};
+
+#endif /* _IPOCTAL_H_ */
diff --git a/drivers/ipack/devices/scc2698.h b/drivers/ipack/devices/scc2698.h
new file mode 100644
index 000000000000..2ad6acd513fa
--- /dev/null
+++ b/drivers/ipack/devices/scc2698.h
@@ -0,0 +1,228 @@
+/*
+ * scc2698.h
+ *
+ * driver for the IPOCTAL boards
+ *
+ * Copyright (C) 2009-2012 CERN (www.cern.ch)
+ * Author: Nicolas Serafini, EIC2 SA
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef SCC2698_H_
+#define SCC2698_H_
+
+/*
+ * union scc2698_channel - Channel access to scc2698 IO
+ *
+ * dn value are only spacer.
+ *
+ */
+union scc2698_channel {
+	struct {
+		u8 d0, mr;  /* Mode register 1/2*/
+		u8 d1, sr;  /* Status register */
+		u8 d2, r1;  /* reserved */
+		u8 d3, rhr; /* Receive holding register (R) */
+		u8 junk[8]; /* other crap for block control */
+	} __packed r; /* Read access */
+	struct {
+		u8 d0, mr;  /* Mode register 1/2 */
+		u8 d1, csr; /* Clock select register */
+		u8 d2, cr;  /* Command register */
+		u8 d3, thr; /* Transmit holding register */
+		u8 junk[8]; /* other crap for block control */
+	} __packed w; /* Write access */
+};
+
+/*
+ * union scc2698_block - Block access to scc2698 IO
+ *
+ * The scc2698 contain 4 block.
+ * Each block containt two channel a and b.
+ * dn value are only spacer.
+ *
+ */
+union scc2698_block {
+	struct {
+		u8 d0, mra;  /* Mode register 1/2 (a) */
+		u8 d1, sra;  /* Status register (a) */
+		u8 d2, r1;   /* reserved */
+		u8 d3, rhra; /* Receive holding register (a) */
+		u8 d4, ipcr; /* Input port change register of block */
+		u8 d5, isr;  /* Interrupt status register of block */
+		u8 d6, ctur; /* Counter timer upper register of block */
+		u8 d7, ctlr; /* Counter timer lower register of block */
+		u8 d8, mrb;  /* Mode register 1/2 (b) */
+		u8 d9, srb;  /* Status register (b) */
+		u8 da, r2;   /* reserved */
+		u8 db, rhrb; /* Receive holding register (b) */
+		u8 dc, r3;   /* reserved */
+		u8 dd, ip;   /* Input port register of block */
+		u8 de, ctg;  /* Start counter timer of block */
+		u8 df, cts;  /* Stop counter timer of block */
+	} __packed r; /* Read access */
+	struct {
+		u8 d0, mra;  /* Mode register 1/2 (a) */
+		u8 d1, csra; /* Clock select register (a) */
+		u8 d2, cra;  /* Command register (a) */
+		u8 d3, thra; /* Transmit holding register (a) */
+		u8 d4, acr;  /* Auxiliary control register of block */
+		u8 d5, imr;  /* Interrupt mask register of block  */
+		u8 d6, ctu;  /* Counter timer upper register of block */
+		u8 d7, ctl;  /* Counter timer lower register of block */
+		u8 d8, mrb;  /* Mode register 1/2 (b) */
+		u8 d9, csrb; /* Clock select register (a) */
+		u8 da, crb;  /* Command register (b) */
+		u8 db, thrb; /* Transmit holding register (b) */
+		u8 dc, r1;   /* reserved */
+		u8 dd, opcr; /* Output port configuration register of block */
+		u8 de, r2;   /* reserved */
+		u8 df, r3;   /* reserved */
+	} __packed w; /* Write access */
+};
+
+#define MR1_CHRL_5_BITS             (0x0 << 0)
+#define MR1_CHRL_6_BITS             (0x1 << 0)
+#define MR1_CHRL_7_BITS             (0x2 << 0)
+#define MR1_CHRL_8_BITS             (0x3 << 0)
+#define MR1_PARITY_EVEN             (0x1 << 2)
+#define MR1_PARITY_ODD              (0x0 << 2)
+#define MR1_PARITY_ON               (0x0 << 3)
+#define MR1_PARITY_FORCE            (0x1 << 3)
+#define MR1_PARITY_OFF              (0x2 << 3)
+#define MR1_PARITY_SPECIAL          (0x3 << 3)
+#define MR1_ERROR_CHAR              (0x0 << 5)
+#define MR1_ERROR_BLOCK             (0x1 << 5)
+#define MR1_RxINT_RxRDY             (0x0 << 6)
+#define MR1_RxINT_FFULL             (0x1 << 6)
+#define MR1_RxRTS_CONTROL_ON        (0x1 << 7)
+#define MR1_RxRTS_CONTROL_OFF       (0x0 << 7)
+
+#define MR2_STOP_BITS_LENGTH_1      (0x7 << 0)
+#define MR2_STOP_BITS_LENGTH_2      (0xF << 0)
+#define MR2_CTS_ENABLE_TX_ON        (0x1 << 4)
+#define MR2_CTS_ENABLE_TX_OFF       (0x0 << 4)
+#define MR2_TxRTS_CONTROL_ON        (0x1 << 5)
+#define MR2_TxRTS_CONTROL_OFF       (0x0 << 5)
+#define MR2_CH_MODE_NORMAL          (0x0 << 6)
+#define MR2_CH_MODE_ECHO            (0x1 << 6)
+#define MR2_CH_MODE_LOCAL           (0x2 << 6)
+#define MR2_CH_MODE_REMOTE          (0x3 << 6)
+
+#define CR_ENABLE_RX                (0x1 << 0)
+#define CR_DISABLE_RX               (0x1 << 1)
+#define CR_ENABLE_TX                (0x1 << 2)
+#define CR_DISABLE_TX               (0x1 << 3)
+#define CR_CMD_RESET_MR             (0x1 << 4)
+#define CR_CMD_RESET_RX             (0x2 << 4)
+#define CR_CMD_RESET_TX             (0x3 << 4)
+#define CR_CMD_RESET_ERR_STATUS     (0x4 << 4)
+#define CR_CMD_RESET_BREAK_CHANGE   (0x5 << 4)
+#define CR_CMD_START_BREAK          (0x6 << 4)
+#define CR_CMD_STOP_BREAK           (0x7 << 4)
+#define CR_CMD_ASSERT_RTSN          (0x8 << 4)
+#define CR_CMD_NEGATE_RTSN          (0x9 << 4)
+#define CR_CMD_SET_TIMEOUT_MODE     (0xA << 4)
+#define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4)
+
+#define SR_RX_READY                 (0x1 << 0)
+#define SR_FIFO_FULL                (0x1 << 1)
+#define SR_TX_READY                 (0x1 << 2)
+#define SR_TX_EMPTY                 (0x1 << 3)
+#define SR_OVERRUN_ERROR            (0x1 << 4)
+#define SR_PARITY_ERROR             (0x1 << 5)
+#define SR_FRAMING_ERROR            (0x1 << 6)
+#define SR_RECEIVED_BREAK           (0x1 << 7)
+
+#define SR_ERROR                    (0xF0)
+
+#define ACR_DELTA_IP0_IRQ_EN        (0x1 << 0)
+#define ACR_DELTA_IP1_IRQ_EN        (0x1 << 1)
+#define ACR_DELTA_IP2_IRQ_EN        (0x1 << 2)
+#define ACR_DELTA_IP3_IRQ_EN        (0x1 << 3)
+#define ACR_CT_Mask                 (0x7 << 4)
+#define ACR_CExt                    (0x0 << 4)
+#define ACR_CTxCA                   (0x1 << 4)
+#define ACR_CTxCB                   (0x2 << 4)
+#define ACR_CClk16                  (0x3 << 4)
+#define ACR_TExt                    (0x4 << 4)
+#define ACR_TExt16                  (0x5 << 4)
+#define ACR_TClk                    (0x6 << 4)
+#define ACR_TClk16                  (0x7 << 4)
+#define ACR_BRG_SET1                (0x0 << 7)
+#define ACR_BRG_SET2                (0x1 << 7)
+
+#define TX_CLK_75                   (0x0 << 0)
+#define TX_CLK_110                  (0x1 << 0)
+#define TX_CLK_38400                (0x2 << 0)
+#define TX_CLK_150                  (0x3 << 0)
+#define TX_CLK_300                  (0x4 << 0)
+#define TX_CLK_600                  (0x5 << 0)
+#define TX_CLK_1200                 (0x6 << 0)
+#define TX_CLK_2000                 (0x7 << 0)
+#define TX_CLK_2400                 (0x8 << 0)
+#define TX_CLK_4800                 (0x9 << 0)
+#define TX_CLK_1800                 (0xA << 0)
+#define TX_CLK_9600                 (0xB << 0)
+#define TX_CLK_19200                (0xC << 0)
+#define RX_CLK_75                   (0x0 << 4)
+#define RX_CLK_110                  (0x1 << 4)
+#define RX_CLK_38400                (0x2 << 4)
+#define RX_CLK_150                  (0x3 << 4)
+#define RX_CLK_300                  (0x4 << 4)
+#define RX_CLK_600                  (0x5 << 4)
+#define RX_CLK_1200                 (0x6 << 4)
+#define RX_CLK_2000                 (0x7 << 4)
+#define RX_CLK_2400                 (0x8 << 4)
+#define RX_CLK_4800                 (0x9 << 4)
+#define RX_CLK_1800                 (0xA << 4)
+#define RX_CLK_9600                 (0xB << 4)
+#define RX_CLK_19200                (0xC << 4)
+
+#define OPCR_MPOa_RTSN              (0x0 << 0)
+#define OPCR_MPOa_C_TO              (0x1 << 0)
+#define OPCR_MPOa_TxC1X             (0x2 << 0)
+#define OPCR_MPOa_TxC16X            (0x3 << 0)
+#define OPCR_MPOa_RxC1X             (0x4 << 0)
+#define OPCR_MPOa_RxC16X            (0x5 << 0)
+#define OPCR_MPOa_TxRDY             (0x6 << 0)
+#define OPCR_MPOa_RxRDY_FF          (0x7 << 0)
+
+#define OPCR_MPOb_RTSN              (0x0 << 4)
+#define OPCR_MPOb_C_TO              (0x1 << 4)
+#define OPCR_MPOb_TxC1X             (0x2 << 4)
+#define OPCR_MPOb_TxC16X            (0x3 << 4)
+#define OPCR_MPOb_RxC1X             (0x4 << 4)
+#define OPCR_MPOb_RxC16X            (0x5 << 4)
+#define OPCR_MPOb_TxRDY             (0x6 << 4)
+#define OPCR_MPOb_RxRDY_FF          (0x7 << 4)
+
+#define OPCR_MPP_INPUT              (0x0 << 7)
+#define OPCR_MPP_OUTPUT             (0x1 << 7)
+
+#define IMR_TxRDY_A                 (0x1 << 0)
+#define IMR_RxRDY_FFULL_A           (0x1 << 1)
+#define IMR_DELTA_BREAK_A           (0x1 << 2)
+#define IMR_COUNTER_READY           (0x1 << 3)
+#define IMR_TxRDY_B                 (0x1 << 4)
+#define IMR_RxRDY_FFULL_B           (0x1 << 5)
+#define IMR_DELTA_BREAK_B           (0x1 << 6)
+#define IMR_INPUT_PORT_CHANGE       (0x1 << 7)
+
+#define ISR_TxRDY_A                 (0x1 << 0)
+#define ISR_RxRDY_FFULL_A           (0x1 << 1)
+#define ISR_DELTA_BREAK_A           (0x1 << 2)
+#define ISR_COUNTER_READY           (0x1 << 3)
+#define ISR_TxRDY_B                 (0x1 << 4)
+#define ISR_RxRDY_FFULL_B           (0x1 << 5)
+#define ISR_DELTA_BREAK_B           (0x1 << 6)
+#define ISR_INPUT_PORT_CHANGE       (0x1 << 7)
+
+#define ACK_INT_REQ0			0
+#define ACK_INT_REQ1			2
+
+#endif /* SCC2698_H_ */
diff --git a/drivers/ipack/ipack.c b/drivers/ipack/ipack.c
new file mode 100644
index 000000000000..7ec6b208b1cb
--- /dev/null
+++ b/drivers/ipack/ipack.c
@@ -0,0 +1,481 @@
+/*
+ * Industry-pack bus support functions.
+ *
+ * Copyright (C) 2011-2012 CERN (www.cern.ch)
+ * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/io.h>
+#include <linux/ipack.h>
+
+#define to_ipack_dev(device) container_of(device, struct ipack_device, dev)
+#define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver)
+
+static DEFINE_IDA(ipack_ida);
+
+static void ipack_device_release(struct device *dev)
+{
+	struct ipack_device *device = to_ipack_dev(dev);
+	kfree(device->id);
+	device->release(device);
+}
+
+static inline const struct ipack_device_id *
+ipack_match_one_device(const struct ipack_device_id *id,
+		       const struct ipack_device *device)
+{
+	if ((id->format == IPACK_ANY_FORMAT ||
+				id->format == device->id_format) &&
+	    (id->vendor == IPACK_ANY_ID || id->vendor == device->id_vendor) &&
+	    (id->device == IPACK_ANY_ID || id->device == device->id_device))
+		return id;
+	return NULL;
+}
+
+static const struct ipack_device_id *
+ipack_match_id(const struct ipack_device_id *ids, struct ipack_device *idev)
+{
+	if (ids) {
+		while (ids->vendor || ids->device) {
+			if (ipack_match_one_device(ids, idev))
+				return ids;
+			ids++;
+		}
+	}
+	return NULL;
+}
+
+static int ipack_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct ipack_device *idev = to_ipack_dev(dev);
+	struct ipack_driver *idrv = to_ipack_driver(drv);
+	const struct ipack_device_id *found_id;
+
+	found_id = ipack_match_id(idrv->id_table, idev);
+	return found_id ? 1 : 0;
+}
+
+static int ipack_bus_probe(struct device *device)
+{
+	struct ipack_device *dev = to_ipack_dev(device);
+	struct ipack_driver *drv = to_ipack_driver(device->driver);
+
+	if (!drv->ops->probe)
+		return -EINVAL;
+
+	return drv->ops->probe(dev);
+}
+
+static int ipack_bus_remove(struct device *device)
+{
+	struct ipack_device *dev = to_ipack_dev(device);
+	struct ipack_driver *drv = to_ipack_driver(device->driver);
+
+	if (!drv->ops->remove)
+		return -EINVAL;
+
+	drv->ops->remove(dev);
+	return 0;
+}
+
+static int ipack_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct ipack_device *idev;
+
+	if (!dev)
+		return -ENODEV;
+
+	idev = to_ipack_dev(dev);
+
+	if (add_uevent_var(env,
+			   "MODALIAS=ipack:f%02Xv%08Xd%08X", idev->id_format,
+			   idev->id_vendor, idev->id_device))
+		return -ENOMEM;
+
+	return 0;
+}
+
+#define ipack_device_attr(field, format_string)				\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr,		\
+		char *buf)						\
+{									\
+	struct ipack_device *idev = to_ipack_dev(dev);			\
+	return sprintf(buf, format_string, idev->field);		\
+}
+
+static ssize_t id_show(struct device *dev,
+		       struct device_attribute *attr, char *buf)
+{
+	unsigned int i, c, l, s;
+	struct ipack_device *idev = to_ipack_dev(dev);
+
+
+	switch (idev->id_format) {
+	case IPACK_ID_VERSION_1:
+		l = 0x7; s = 1; break;
+	case IPACK_ID_VERSION_2:
+		l = 0xf; s = 2; break;
+	default:
+		return -EIO;
+	}
+	c = 0;
+	for (i = 0; i < idev->id_avail; i++) {
+		if (i > 0) {
+			if ((i & l) == 0)
+				buf[c++] = '\n';
+			else if ((i & s) == 0)
+				buf[c++] = ' ';
+		}
+		sprintf(&buf[c], "%02x", idev->id[i]);
+		c += 2;
+	}
+	buf[c++] = '\n';
+	return c;
+}
+
+static ssize_t
+id_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct ipack_device *idev = to_ipack_dev(dev);
+	switch (idev->id_format) {
+	case IPACK_ID_VERSION_1:
+		return sprintf(buf, "0x%02x\n", idev->id_vendor);
+	case IPACK_ID_VERSION_2:
+		return sprintf(buf, "0x%06x\n", idev->id_vendor);
+	default:
+		return -EIO;
+	}
+}
+
+static ssize_t
+id_device_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct ipack_device *idev = to_ipack_dev(dev);
+	switch (idev->id_format) {
+	case IPACK_ID_VERSION_1:
+		return sprintf(buf, "0x%02x\n", idev->id_device);
+	case IPACK_ID_VERSION_2:
+		return sprintf(buf, "0x%04x\n", idev->id_device);
+	default:
+		return -EIO;
+	}
+}
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct ipack_device *idev = to_ipack_dev(dev);
+
+	return sprintf(buf, "ipac:f%02Xv%08Xd%08X", idev->id_format,
+		       idev->id_vendor, idev->id_device);
+}
+
+ipack_device_attr(id_format, "0x%hhu\n");
+
+static struct device_attribute ipack_dev_attrs[] = {
+	__ATTR_RO(id),
+	__ATTR_RO(id_device),
+	__ATTR_RO(id_format),
+	__ATTR_RO(id_vendor),
+	__ATTR_RO(modalias),
+};
+
+static struct bus_type ipack_bus_type = {
+	.name      = "ipack",
+	.probe     = ipack_bus_probe,
+	.match     = ipack_bus_match,
+	.remove    = ipack_bus_remove,
+	.dev_attrs = ipack_dev_attrs,
+	.uevent	   = ipack_uevent,
+};
+
+struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
+					    const struct ipack_bus_ops *ops)
+{
+	int bus_nr;
+	struct ipack_bus_device *bus;
+
+	bus = kzalloc(sizeof(struct ipack_bus_device), GFP_KERNEL);
+	if (!bus)
+		return NULL;
+
+	bus_nr = ida_simple_get(&ipack_ida, 0, 0, GFP_KERNEL);
+	if (bus_nr < 0) {
+		kfree(bus);
+		return NULL;
+	}
+
+	bus->bus_nr = bus_nr;
+	bus->parent = parent;
+	bus->slots = slots;
+	bus->ops = ops;
+	return bus;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_register);
+
+static int ipack_unregister_bus_member(struct device *dev, void *data)
+{
+	struct ipack_device *idev = to_ipack_dev(dev);
+	struct ipack_bus_device *bus = data;
+
+	if (idev->bus == bus)
+		ipack_device_unregister(idev);
+
+	return 1;
+}
+
+int ipack_bus_unregister(struct ipack_bus_device *bus)
+{
+	bus_for_each_dev(&ipack_bus_type, NULL, bus,
+		ipack_unregister_bus_member);
+	ida_simple_remove(&ipack_ida, bus->bus_nr);
+	kfree(bus);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_unregister);
+
+int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
+			  const char *name)
+{
+	edrv->driver.owner = owner;
+	edrv->driver.name = name;
+	edrv->driver.bus = &ipack_bus_type;
+	return driver_register(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_register);
+
+void ipack_driver_unregister(struct ipack_driver *edrv)
+{
+	driver_unregister(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_unregister);
+
+static u16 ipack_crc_byte(u16 crc, u8 c)
+{
+	int i;
+
+	crc ^= c << 8;
+	for (i = 0; i < 8; i++)
+		crc = (crc << 1) ^ ((crc & 0x8000) ? 0x1021 : 0);
+	return crc;
+}
+
+/*
+ * The algorithm in lib/crc-ccitt.c does not seem to apply since it uses the
+ * opposite bit ordering.
+ */
+static u8 ipack_calc_crc1(struct ipack_device *dev)
+{
+	u8 c;
+	u16 crc;
+	unsigned int i;
+
+	crc = 0xffff;
+	for (i = 0; i < dev->id_avail; i++) {
+		c = (i != 11) ? dev->id[i] : 0;
+		crc = ipack_crc_byte(crc, c);
+	}
+	crc = ~crc;
+	return crc & 0xff;
+}
+
+static u16 ipack_calc_crc2(struct ipack_device *dev)
+{
+	u8 c;
+	u16 crc;
+	unsigned int i;
+
+	crc = 0xffff;
+	for (i = 0; i < dev->id_avail; i++) {
+		c = ((i != 0x18) && (i != 0x19)) ? dev->id[i] : 0;
+		crc = ipack_crc_byte(crc, c);
+	}
+	crc = ~crc;
+	return crc;
+}
+
+static void ipack_parse_id1(struct ipack_device *dev)
+{
+	u8 *id = dev->id;
+	u8 crc;
+
+	dev->id_vendor = id[4];
+	dev->id_device = id[5];
+	dev->speed_8mhz = 1;
+	dev->speed_32mhz = (id[7] == 'H');
+	crc = ipack_calc_crc1(dev);
+	dev->id_crc_correct = (crc == id[11]);
+	if (!dev->id_crc_correct) {
+		dev_warn(&dev->dev, "ID CRC invalid found 0x%x, expected 0x%x.\n",
+				id[11], crc);
+	}
+}
+
+static void ipack_parse_id2(struct ipack_device *dev)
+{
+	__be16 *id = (__be16 *) dev->id;
+	u16 flags, crc;
+
+	dev->id_vendor = ((be16_to_cpu(id[3]) & 0xff) << 16)
+			 + be16_to_cpu(id[4]);
+	dev->id_device = be16_to_cpu(id[5]);
+	flags = be16_to_cpu(id[10]);
+	dev->speed_8mhz = !!(flags & 2);
+	dev->speed_32mhz = !!(flags & 4);
+	crc = ipack_calc_crc2(dev);
+	dev->id_crc_correct = (crc == be16_to_cpu(id[12]));
+	if (!dev->id_crc_correct) {
+		dev_warn(&dev->dev, "ID CRC invalid found 0x%x, expected 0x%x.\n",
+				id[11], crc);
+	}
+}
+
+static int ipack_device_read_id(struct ipack_device *dev)
+{
+	u8 __iomem *idmem;
+	int i;
+	int ret = 0;
+
+	idmem = ioremap(dev->region[IPACK_ID_SPACE].start,
+			dev->region[IPACK_ID_SPACE].size);
+	if (!idmem) {
+		dev_err(&dev->dev, "error mapping memory\n");
+		return -ENOMEM;
+	}
+
+	/* Determine ID PROM Data Format.  If we find the ids "IPAC" or "IPAH"
+	 * we are dealing with a IndustryPack  format 1 device.  If we detect
+	 * "VITA4 " (16 bit big endian formatted) we are dealing with a
+	 * IndustryPack format 2 device */
+	if ((ioread8(idmem + 1) == 'I') &&
+			(ioread8(idmem + 3) == 'P') &&
+			(ioread8(idmem + 5) == 'A') &&
+			((ioread8(idmem + 7) == 'C') ||
+			 (ioread8(idmem + 7) == 'H'))) {
+		dev->id_format = IPACK_ID_VERSION_1;
+		dev->id_avail = ioread8(idmem + 0x15);
+		if ((dev->id_avail < 0x0c) || (dev->id_avail > 0x40)) {
+			dev_warn(&dev->dev, "invalid id size");
+			dev->id_avail = 0x0c;
+		}
+	} else if ((ioread8(idmem + 0) == 'I') &&
+			(ioread8(idmem + 1) == 'V') &&
+			(ioread8(idmem + 2) == 'A') &&
+			(ioread8(idmem + 3) == 'T') &&
+			(ioread8(idmem + 4) == ' ') &&
+			(ioread8(idmem + 5) == '4')) {
+		dev->id_format = IPACK_ID_VERSION_2;
+		dev->id_avail = ioread16be(idmem + 0x16);
+		if ((dev->id_avail < 0x1a) || (dev->id_avail > 0x40)) {
+			dev_warn(&dev->dev, "invalid id size");
+			dev->id_avail = 0x1a;
+		}
+	} else {
+		dev->id_format = IPACK_ID_VERSION_INVALID;
+		dev->id_avail = 0;
+	}
+
+	if (!dev->id_avail) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Obtain the amount of memory required to store a copy of the complete
+	 * ID ROM contents */
+	dev->id = kmalloc(dev->id_avail, GFP_KERNEL);
+	if (!dev->id) {
+		dev_err(&dev->dev, "dev->id alloc failed.\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+	for (i = 0; i < dev->id_avail; i++) {
+		if (dev->id_format == IPACK_ID_VERSION_1)
+			dev->id[i] = ioread8(idmem + (i << 1) + 1);
+		else
+			dev->id[i] = ioread8(idmem + i);
+	}
+
+	/* now we can finally work with the copy */
+	switch (dev->id_format) {
+	case IPACK_ID_VERSION_1:
+		ipack_parse_id1(dev);
+		break;
+	case IPACK_ID_VERSION_2:
+		ipack_parse_id2(dev);
+		break;
+	}
+
+out:
+	iounmap(idmem);
+
+	return ret;
+}
+
+int ipack_device_register(struct ipack_device *dev)
+{
+	int ret;
+
+	dev->dev.bus = &ipack_bus_type;
+	dev->dev.release = ipack_device_release;
+	dev->dev.parent = dev->bus->parent;
+	dev_set_name(&dev->dev,
+		     "ipack-dev.%u.%u", dev->bus->bus_nr, dev->slot);
+
+	if (dev->bus->ops->set_clockrate(dev, 8))
+		dev_warn(&dev->dev, "failed to switch to 8 MHz operation for reading of device ID.\n");
+	if (dev->bus->ops->reset_timeout(dev))
+		dev_warn(&dev->dev, "failed to reset potential timeout.");
+
+	ret = ipack_device_read_id(dev);
+	if (ret < 0) {
+		dev_err(&dev->dev, "error reading device id section.\n");
+		return ret;
+	}
+
+	/* if the device supports 32 MHz operation, use it. */
+	if (dev->speed_32mhz) {
+		ret = dev->bus->ops->set_clockrate(dev, 32);
+		if (ret < 0)
+			dev_err(&dev->dev, "failed to switch to 32 MHz operation.\n");
+	}
+
+	ret = device_register(&dev->dev);
+	if (ret < 0)
+		kfree(dev->id);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ipack_device_register);
+
+void ipack_device_unregister(struct ipack_device *dev)
+{
+	device_unregister(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(ipack_device_unregister);
+
+static int __init ipack_init(void)
+{
+	ida_init(&ipack_ida);
+	return bus_register(&ipack_bus_type);
+}
+
+static void __exit ipack_exit(void)
+{
+	bus_unregister(&ipack_bus_type);
+	ida_destroy(&ipack_ida);
+}
+
+module_init(ipack_init);
+module_exit(ipack_exit);
+
+MODULE_AUTHOR("Samuel Iglesias Gonsalvez <siglesias@igalia.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Industry-pack bus core");