irqchip: RISC-V per-HART local interrupt controller driver

The RISC-V per-HART local interrupt controller manages software
interrupts, timer interrupts, external interrupts (which are routed
via the platform level interrupt controller) and other per-HART
local interrupts.

We add a driver for the RISC-V local interrupt controller, which
eventually replaces the RISC-V architecture code, allowing for a
better split between arch code and drivers.

The driver is compliant with RISC-V Hart-Level Interrupt Controller
DT bindings located at:
Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt

Co-developed-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
[Palmer: Cleaned up warnings]
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>

1 files changed, 146 insertions, 0 deletions

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
new file mode 100644
index 000000000000..a80fb1731c50
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017-2018 SiFive
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#define pr_fmt(fmt) "riscv-intc: " fmt
+#include <linux/atomic.h>
+#include <linux/bits.h>
+#include <linux/cpu.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+static struct irq_domain *intc_domain;
+
+static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG;
+
+	if (unlikely(cause >= BITS_PER_LONG))
+		panic("unexpected interrupt cause");
+
+	switch (cause) {
+	case RV_IRQ_TIMER:
+		old_regs = set_irq_regs(regs);
+		irq_enter();
+		riscv_timer_interrupt();
+		irq_exit();
+		set_irq_regs(old_regs);
+		break;
+#ifdef CONFIG_SMP
+	case RV_IRQ_SOFT:
+		/*
+		 * We only use software interrupts to pass IPIs, so if a
+		 * non-SMP system gets one, then we don't know what to do.
+		 */
+		handle_IPI(regs);
+		break;
+#endif
+	default:
+		handle_domain_irq(intc_domain, cause, regs);
+		break;
+	}
+}
+
+/*
+ * On RISC-V systems local interrupts are masked or unmasked by writing
+ * the SIE (Supervisor Interrupt Enable) CSR.  As CSRs can only be written
+ * on the local hart, these functions can only be called on the hart that
+ * corresponds to the IRQ chip.
+ */
+
+static void riscv_intc_irq_mask(struct irq_data *d)
+{
+	csr_clear(CSR_IE, BIT(d->hwirq));
+}
+
+static void riscv_intc_irq_unmask(struct irq_data *d)
+{
+	csr_set(CSR_IE, BIT(d->hwirq));
+}
+
+static int riscv_intc_cpu_starting(unsigned int cpu)
+{
+	csr_set(CSR_IE, BIT(RV_IRQ_SOFT));
+	return 0;
+}
+
+static int riscv_intc_cpu_dying(unsigned int cpu)
+{
+	csr_clear(CSR_IE, BIT(RV_IRQ_SOFT));
+	return 0;
+}
+
+static struct irq_chip riscv_intc_chip = {
+	.name = "RISC-V INTC",
+	.irq_mask = riscv_intc_irq_mask,
+	.irq_unmask = riscv_intc_irq_unmask,
+};
+
+static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
+				 irq_hw_number_t hwirq)
+{
+	irq_set_percpu_devid(irq);
+	irq_domain_set_info(d, irq, hwirq, &riscv_intc_chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
+
+	return 0;
+}
+
+static const struct irq_domain_ops riscv_intc_domain_ops = {
+	.map	= riscv_intc_domain_map,
+	.xlate	= irq_domain_xlate_onecell,
+};
+
+static int __init riscv_intc_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	int rc, hartid;
+
+	hartid = riscv_of_parent_hartid(node);
+	if (hartid < 0) {
+		pr_warn("unable to fine hart id for %pOF\n", node);
+		return 0;
+	}
+
+	/*
+	 * The DT will have one INTC DT node under each CPU (or HART)
+	 * DT node so riscv_intc_init() function will be called once
+	 * for each INTC DT node. We only need to do INTC initialization
+	 * for the INTC DT node belonging to boot CPU (or boot HART).
+	 */
+	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
+		return 0;
+
+	intc_domain = irq_domain_add_linear(node, BITS_PER_LONG,
+					    &riscv_intc_domain_ops, NULL);
+	if (!intc_domain) {
+		pr_err("unable to add IRQ domain\n");
+		return -ENXIO;
+	}
+
+	rc = set_handle_irq(&riscv_intc_irq);
+	if (rc) {
+		pr_err("failed to set irq handler\n");
+		return rc;
+	}
+
+	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
+			  "irqchip/riscv/intc:starting",
+			  riscv_intc_cpu_starting,
+			  riscv_intc_cpu_dying);
+
+	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+
+	return 0;
+}
+
+IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);