Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung S3C24xx and S3C64xx machine code cleanup for v5.10

Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos.  This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.

The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform.  The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory.  However this is step forward for multiplatform or at least
to keep this code still maintainable.

This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.

* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
  ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
  ARM: s3c: Cleanup from old plat-samsung include
  ARM: s3c: make headers local if possible
  ARM: s3c: move into a common directory
  ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
  cpufreq: s3c24xx: move low-level clk reg access into platform code
  cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
  ARM: s3c: remove cpufreq header dependencies
  cpufreq: s3c24xx: split out registers
  fbdev: s3c2410fb: remove mach header dependency
  ARM: s3c24xx: bast: avoid irq_desc array usage
  ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
  ARM: s3c24xx: include mach/irqs.h where needed
  ARM: s3c24xx: move s3cmci pinctrl handling into board files
  ARM: s3c24xx: move iis pinctrl config into boards
  ARM: s3c24xx: move spi fiq handler into platform
  ARM: s3c: adc: move header to linux/soc/samsung
  ARM: s3c24xx: move irqchip driver back into platform
  ARM: s3c24xx: move regs-spi.h into spi driver
  ARM: s3c64xx: remove mach/hardware.h
  ...

Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 0 insertions, 1331 deletions

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 133f9c45744a..8c983ad774f6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_LPC32XX)		+= irq-lpc32xx.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
-obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
 obj-$(CONFIG_CLPS711X_IRQCHIP)		+= irq-clps711x.o
 obj-$(CONFIG_OMPIC)			+= irq-ompic.o
diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c
deleted file mode 100644
index d2031fecc386..000000000000
--- a/drivers/irqchip/irq-s3c24xx.c
+++ /dev/null
@@ -1,1330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * S3C24XX IRQ handling
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-*/
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
-
-#define S3C_IRQTYPE_NONE	0
-#define S3C_IRQTYPE_EINT	1
-#define S3C_IRQTYPE_EDGE	2
-#define S3C_IRQTYPE_LEVEL	3
-
-struct s3c_irq_data {
-	unsigned int type;
-	unsigned long offset;
-	unsigned long parent_irq;
-
-	/* data gets filled during init */
-	struct s3c_irq_intc *intc;
-	unsigned long sub_bits;
-	struct s3c_irq_intc *sub_intc;
-};
-
-/*
- * Structure holding the controller data
- * @reg_pending		register holding pending irqs
- * @reg_intpnd		special register intpnd in main intc
- * @reg_mask		mask register
- * @domain		irq_domain of the controller
- * @parent		parent controller for ext and sub irqs
- * @irqs		irq-data, always s3c_irq_data[32]
- */
-struct s3c_irq_intc {
-	void __iomem		*reg_pending;
-	void __iomem		*reg_intpnd;
-	void __iomem		*reg_mask;
-	struct irq_domain	*domain;
-	struct s3c_irq_intc	*parent;
-	struct s3c_irq_data	*irqs;
-};
-
-/*
- * Array holding pointers to the global controller structs
- * [0] ... main_intc
- * [1] ... sub_intc
- * [2] ... main_intc2 on s3c2416
- */
-static struct s3c_irq_intc *s3c_intc[3];
-
-static void s3c_irq_mask(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *parent_data;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = readl_relaxed(intc->reg_mask);
-	mask |= (1UL << irq_data->offset);
-	writel_relaxed(mask, intc->reg_mask);
-
-	if (parent_intc) {
-		parent_data = &parent_intc->irqs[irq_data->parent_irq];
-
-		/* check to see if we need to mask the parent IRQ
-		 * The parent_irq is always in main_intc, so the hwirq
-		 * for find_mapping does not need an offset in any case.
-		 */
-		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
-			irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-			s3c_irq_mask(irq_get_irq_data(irqno));
-		}
-	}
-}
-
-static void s3c_irq_unmask(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = readl_relaxed(intc->reg_mask);
-	mask &= ~(1UL << irq_data->offset);
-	writel_relaxed(mask, intc->reg_mask);
-
-	if (parent_intc) {
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		s3c_irq_unmask(irq_get_irq_data(irqno));
-	}
-}
-
-static inline void s3c_irq_ack(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	unsigned long bitval = 1UL << irq_data->offset;
-
-	writel_relaxed(bitval, intc->reg_pending);
-	if (intc->reg_intpnd)
-		writel_relaxed(bitval, intc->reg_intpnd);
-}
-
-static int s3c_irq_type(struct irq_data *data, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-	case IRQ_TYPE_EDGE_FALLING:
-	case IRQ_TYPE_EDGE_BOTH:
-		irq_set_handler(data->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-	case IRQ_TYPE_LEVEL_HIGH:
-		irq_set_handler(data->irq, handle_level_irq);
-		break;
-	default:
-		pr_err("No such irq type %d\n", type);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3c_irqext_type_set(void __iomem *gpcon_reg,
-			       void __iomem *extint_reg,
-			       unsigned long gpcon_offset,
-			       unsigned long extint_offset,
-			       unsigned int type)
-{
-	unsigned long newvalue = 0, value;
-
-	/* Set the GPIO to external interrupt mode */
-	value = readl_relaxed(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	writel_relaxed(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQ_TYPE_NONE:
-			pr_warn("No edge setting!\n");
-			break;
-
-		case IRQ_TYPE_EDGE_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_BOTH:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			pr_err("No such irq type %d\n", type);
-			return -EINVAL;
-	}
-
-	value = readl_relaxed(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	writel_relaxed(value, extint_reg);
-
-	return 0;
-}
-
-static int s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 8) * 4;
-	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 16) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if (data->hwirq <= 3) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_type	= s3c_irq_type,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irq_type,
-};
-
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irqext_type,
-	.irq_set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext0_type,
-};
-
-static void s3c_irq_demux(struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
-	unsigned int n, offset, irq;
-	unsigned long src, msk;
-
-	/* we're using individual domains for the non-dt case
-	 * and one big domain for the dt case where the subintc
-	 * starts at hwirq number 32.
-	 */
-	offset = irq_domain_get_of_node(intc->domain) ? 32 : 0;
-
-	chained_irq_enter(chip, desc);
-
-	src = readl_relaxed(sub_intc->reg_pending);
-	msk = readl_relaxed(sub_intc->reg_mask);
-
-	src &= ~msk;
-	src &= irq_data->sub_bits;
-
-	while (src) {
-		n = __ffs(src);
-		src &= ~(1 << n);
-		irq = irq_find_mapping(sub_intc->domain, offset + n);
-		generic_handle_irq(irq);
-	}
-
-	chained_irq_exit(chip, desc);
-}
-
-static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
-				      struct pt_regs *regs, int intc_offset)
-{
-	int pnd;
-	int offset;
-
-	pnd = readl_relaxed(intc->reg_intpnd);
-	if (!pnd)
-		return false;
-
-	/* non-dt machines use individual domains */
-	if (!irq_domain_get_of_node(intc->domain))
-		intc_offset = 0;
-
-	/* We have a problem that the INTOFFSET register does not always
-	 * show one interrupt. Occasionally we get two interrupts through
-	 * the prioritiser, and this causes the INTOFFSET register to show
-	 * what looks like the logical-or of the two interrupt numbers.
-	 *
-	 * Thanks to Klaus, Shannon, et al for helping to debug this problem
-	 */
-	offset = readl_relaxed(intc->reg_intpnd + 4);
-
-	/* Find the bit manually, when the offset is wrong.
-	 * The pending register only ever contains the one bit of the next
-	 * interrupt to handle.
-	 */
-	if (!(pnd & (1 << offset)))
-		offset =  __ffs(pnd);
-
-	handle_domain_irq(intc->domain, intc_offset + offset, regs);
-	return true;
-}
-
-asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
-{
-	do {
-		if (likely(s3c_intc[0]))
-			if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
-				continue;
-
-		if (s3c_intc[2])
-			if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
-				continue;
-
-		break;
-	} while (1);
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
-	u32 intmod;
-	unsigned offs;
-
-	if (on) {
-		offs = irq - FIQ_START;
-		if (offs > 31)
-			return -EINVAL;
-
-		intmod = 1 << offs;
-	} else {
-		intmod = 0;
-	}
-
-	writel_relaxed(intmod, S3C2410_INTMOD);
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct s3c_irq_intc *intc = h->host_data;
-	struct s3c_irq_data *irq_data = &intc->irqs[hw];
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *parent_irq_data;
-	unsigned int irqno;
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-	irq_data->offset = hw;
-
-	parent_intc = intc->parent;
-
-	/* set handler and flags */
-	switch (irq_data->type) {
-	case S3C_IRQTYPE_NONE:
-		return 0;
-	case S3C_IRQTYPE_EINT:
-		/* On the S3C2412, the EINT0to3 have a parent irq
-		 * but need the s3c_irq_eint0t4 chip
-		 */
-		if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
-			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_EDGE:
-		if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_LEVEL:
-		if (parent_intc)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_level_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_level_irq);
-		break;
-	default:
-		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
-		return -EINVAL;
-	}
-
-	irq_set_chip_data(virq, irq_data);
-
-	if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
-		if (irq_data->parent_irq > 31) {
-			pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
-			       irq_data->parent_irq);
-			return -EINVAL;
-		}
-
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << hw);
-
-		/* attach the demuxer to the parent irq */
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		if (!irqno) {
-			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
-			       irq_data->parent_irq);
-			return -EINVAL;
-		}
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops = {
-	.map = s3c24xx_irq_map,
-	.xlate = irq_domain_xlate_twocell,
-};
-
-static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
-{
-	void __iomem *reg_source;
-	unsigned long pend;
-	unsigned long last;
-	int i;
-
-	/* if intpnd is set, read the next pending irq from there */
-	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = readl_relaxed(reg_source);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		writel_relaxed(pend, intc->reg_pending);
-		if (intc->reg_intpnd)
-			writel_relaxed(pend, intc->reg_intpnd);
-
-		pr_info("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-}
-
-static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np,
-				       struct s3c_irq_data *irq_data,
-				       struct s3c_irq_intc *parent,
-				       unsigned long address)
-{
-	struct s3c_irq_intc *intc;
-	void __iomem *base = (void *)0xf6000000; /* static mapping */
-	int irq_num;
-	int irq_start;
-	int ret;
-
-	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-	if (!intc)
-		return ERR_PTR(-ENOMEM);
-
-	intc->irqs = irq_data;
-
-	if (parent)
-		intc->parent = parent;
-
-	/* select the correct data for the controller.
-	 * Need to hard code the irq num start and offset
-	 * to preserve the static mapping for now
-	 */
-	switch (address) {
-	case 0x4a000000:
-		pr_debug("irq: found main intc\n");
-		intc->reg_pending = base;
-		intc->reg_mask = base + 0x08;
-		intc->reg_intpnd = base + 0x10;
-		irq_num = 32;
-		irq_start = S3C2410_IRQ(0);
-		break;
-	case 0x4a000018:
-		pr_debug("irq: found subintc\n");
-		intc->reg_pending = base + 0x18;
-		intc->reg_mask = base + 0x1c;
-		irq_num = 29;
-		irq_start = S3C2410_IRQSUB(0);
-		break;
-	case 0x4a000040:
-		pr_debug("irq: found intc2\n");
-		intc->reg_pending = base + 0x40;
-		intc->reg_mask = base + 0x48;
-		intc->reg_intpnd = base + 0x50;
-		irq_num = 8;
-		irq_start = S3C2416_IRQ(0);
-		break;
-	case 0x560000a4:
-		pr_debug("irq: found eintc\n");
-		base = (void *)0xfd000000;
-
-		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0xa8;
-		irq_num = 24;
-		irq_start = S3C2410_IRQ(32);
-		break;
-	default:
-		pr_err("irq: unsupported controller address\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* now that all the data is complete, init the irq-domain */
-	s3c24xx_clear_intc(intc);
-	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
-					     0, &s3c24xx_irq_ops,
-					     intc);
-	if (!intc->domain) {
-		pr_err("irq: could not create irq-domain\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	set_handle_irq(s3c24xx_handle_irq);
-
-	return intc;
-
-err:
-	kfree(intc);
-	return ERR_PTR(ret);
-}
-
-static struct s3c_irq_data __maybe_unused init_eint[32] = {
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-#ifdef CONFIG_CPU_S3C2410
-static struct s3c_irq_data init_s3c2410base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2410subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-};
-
-void __init s3c2410_init_irq(void)
-{
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
-					s3c_intc[0], 0x4a000018);
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c_irq_data init_s3c2412base[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2412eint[32] = {
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-static struct s3c_irq_data init_s3c2412subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
-};
-
-void __init s3c2412_init_irq(void)
-{
-	pr_info("S3C2412: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-static struct s3c_irq_data init_s3c2416base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2416subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-static struct s3c_irq_data init_s3c2416_second[32] = {
-	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-};
-
-void __init s3c2416_init_irq(void)
-{
-	pr_info("S3C2416: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
-					s3c_intc[0], 0x4a000018);
-
-	s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
-					NULL, 0x4a000040);
-}
-
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-static struct s3c_irq_data init_s3c2440base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2440subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2440_init_irq(void)
-{
-	pr_info("S3C2440: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-static struct s3c_irq_data init_s3c2442base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2442subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-};
-
-void __init s3c2442_init_irq(void)
-{
-	pr_info("S3C2442: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct s3c_irq_data init_s3c2443base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-
-static struct s3c_irq_data init_s3c2443subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2443_init_irq(void)
-{
-	pr_info("S3C2443: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_OF
-static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	unsigned int ctrl_num = hw / 32;
-	unsigned int intc_hw = hw % 32;
-	struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-	irq_data->offset = intc_hw;
-
-	if (!parent_intc)
-		irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
-	else
-		irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-					 handle_edge_irq);
-
-	irq_set_chip_data(virq, irq_data);
-
-	return 0;
-}
-
-/* Translate our of irq notation
- * format: <ctrl_num ctrl_irq parent_irq type>
- */
-static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
-			const u32 *intspec, unsigned int intsize,
-			irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
-	struct s3c_irq_intc *intc;
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *irq_data;
-	struct s3c_irq_data *parent_irq_data;
-	int irqno;
-
-	if (WARN_ON(intsize < 4))
-		return -EINVAL;
-
-	if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
-		pr_err("controller number %d invalid\n", intspec[0]);
-		return -EINVAL;
-	}
-	intc = s3c_intc[intspec[0]];
-
-	*out_hwirq = intspec[0] * 32 + intspec[2];
-	*out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
-
-	parent_intc = intc->parent;
-	if (parent_intc) {
-		irq_data = &intc->irqs[intspec[2]];
-		irq_data->parent_irq = intspec[1];
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << intspec[2]);
-
-		/* parent_intc is always s3c_intc[0], so no offset */
-		irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
-		if (irqno < 0) {
-			pr_err("irq: could not map parent interrupt\n");
-			return irqno;
-		}
-
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops_of = {
-	.map = s3c24xx_irq_map_of,
-	.xlate = s3c24xx_irq_xlate_of,
-};
-
-struct s3c24xx_irq_of_ctrl {
-	char			*name;
-	unsigned long		offset;
-	struct s3c_irq_intc	**handle;
-	struct s3c_irq_intc	**parent;
-	struct irq_domain_ops	*ops;
-};
-
-static int __init s3c_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent,
-			struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
-{
-	struct s3c_irq_intc *intc;
-	struct s3c24xx_irq_of_ctrl *ctrl;
-	struct irq_domain *domain;
-	void __iomem *reg_base;
-	int i;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base) {
-		pr_err("irq-s3c24xx: could not map irq registers\n");
-		return -EINVAL;
-	}
-
-	domain = irq_domain_add_linear(np, num_ctrl * 32,
-						     &s3c24xx_irq_ops_of, NULL);
-	if (!domain) {
-		pr_err("irq: could not create irq-domain\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < num_ctrl; i++) {
-		ctrl = &s3c_ctrl[i];
-
-		pr_debug("irq: found controller %s\n", ctrl->name);
-
-		intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-		if (!intc)
-			return -ENOMEM;
-
-		intc->domain = domain;
-		intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data),
-				     GFP_KERNEL);
-		if (!intc->irqs) {
-			kfree(intc);
-			return -ENOMEM;
-		}
-
-		if (ctrl->parent) {
-			intc->reg_pending = reg_base + ctrl->offset;
-			intc->reg_mask = reg_base + ctrl->offset + 0x4;
-
-			if (*(ctrl->parent)) {
-				intc->parent = *(ctrl->parent);
-			} else {
-				pr_warn("irq: parent of %s missing\n",
-					ctrl->name);
-				kfree(intc->irqs);
-				kfree(intc);
-				continue;
-			}
-		} else {
-			intc->reg_pending = reg_base + ctrl->offset;
-			intc->reg_mask = reg_base + ctrl->offset + 0x08;
-			intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
-		}
-
-		s3c24xx_clear_intc(intc);
-		s3c_intc[i] = intc;
-	}
-
-	set_handle_irq(s3c24xx_handle_irq);
-
-	return 0;
-}
-
-static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
-	{
-		.name = "intc",
-		.offset = 0,
-	}, {
-		.name = "subintc",
-		.offset = 0x18,
-		.parent = &s3c_intc[0],
-	}
-};
-
-int __init s3c2410_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent)
-{
-	return s3c_init_intc_of(np, interrupt_parent,
-				s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
-}
-IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
-
-static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
-	{
-		.name = "intc",
-		.offset = 0,
-	}, {
-		.name = "subintc",
-		.offset = 0x18,
-		.parent = &s3c_intc[0],
-	}, {
-		.name = "intc2",
-		.offset = 0x40,
-	}
-};
-
-int __init s3c2416_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent)
-{
-	return s3c_init_intc_of(np, interrupt_parent,
-				s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
-}
-IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
-#endif