isdn: whitespace coding style cleanup

isdn source code uses a not-current coding style.

Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.

Done with emacs and some scripts and some typing.

Built x86 allyesconfig.
No detected change in objdump -d or size.

Signed-off-by: Joe Perches <joe@perches.com>

1 files changed, 56 insertions, 56 deletions

diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index a1b89524b505..f36ff69c07e1 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -18,7 +18,7 @@ static const char *NETjet_S_revision = "$Revision: 2.13.2.4 $";
 
 static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off)
 {
-	return(5);
+	return (5);
 }
 
 static void dummywr(struct IsdnCardState *cs, int chan, u_char off, u_char value)
@@ -46,48 +46,48 @@ netjet_s_interrupt(int intno, void *dev_id)
 		s1val = 1;
 	} else
 		s1val = 0;
-	/* 
+	/*
 	 * read/write stat0 is better, because lower IRQ rate
 	 * Note the IRQ is on for 125 us if a condition match
 	 * thats long on modern CPU and so the IRQ is reentered
 	 * all the time.
 	 */
 	s0val = bytein(cs->hw.njet.base + NETJET_IRQSTAT0);
-	if ((s0val | s1val)==0) { // shared IRQ
+	if ((s0val | s1val) == 0) { // shared IRQ
 		spin_unlock_irqrestore(&cs->lock, flags);
 		return IRQ_NONE;
-	} 
+	}
 	if (s0val)
 		byteout(cs->hw.njet.base + NETJET_IRQSTAT0, s0val);
 	/* start new code 13/07/00 GE */
 	/* set bits in sval to indicate which page is free */
 	if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
-		inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
+	    inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
 		/* the 2nd write page is free */
 		s0val = 0x08;
 	else	/* the 1st write page is free */
-		s0val = 0x04;	
+		s0val = 0x04;
 	if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
-		inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
+	    inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
 		/* the 2nd read page is free */
 		s0val |= 0x02;
 	else	/* the 1st read page is free */
-		s0val |= 0x01;	
+		s0val |= 0x01;
 	if (s0val != cs->hw.njet.last_is0) /* we have a DMA interrupt */
 	{
 		if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
 			printk(KERN_WARNING "nj LOCK_ATOMIC s0val %x->%x\n",
-				cs->hw.njet.last_is0, s0val);
+			       cs->hw.njet.last_is0, s0val);
 			spin_unlock_irqrestore(&cs->lock, flags);
 			return IRQ_HANDLED;
 		}
 		cs->hw.njet.irqstat0 = s0val;
-		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) != 
-			(cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
+		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) !=
+		    (cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
 			/* we have a read dma int */
 			read_tiger(cs);
 		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
-			(cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
+		    (cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
 			/* we have a write dma int */
 			write_tiger(cs);
 		/* end new code 13/07/00 GE */
@@ -124,28 +124,28 @@ NETjet_S_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	u_long flags;
 
 	switch (mt) {
-		case CARD_RESET:
-			spin_lock_irqsave(&cs->lock, flags);
-			reset_netjet_s(cs);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return(0);
-		case CARD_RELEASE:
-			release_io_netjet(cs);
-			return(0);
-		case CARD_INIT:
-			reset_netjet_s(cs);
-			inittiger(cs);
-			spin_lock_irqsave(&cs->lock, flags);
-			clear_pending_isac_ints(cs);
-			initisac(cs);
-			/* Reenable all IRQ */
-			cs->writeisac(cs, ISAC_MASK, 0);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return(0);
-		case CARD_TEST:
-			return(0);
+	case CARD_RESET:
+		spin_lock_irqsave(&cs->lock, flags);
+		reset_netjet_s(cs);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_RELEASE:
+		release_io_netjet(cs);
+		return (0);
+	case CARD_INIT:
+		reset_netjet_s(cs);
+		inittiger(cs);
+		spin_lock_irqsave(&cs->lock, flags);
+		clear_pending_isac_ints(cs);
+		initisac(cs);
+		/* Reenable all IRQ */
+		cs->writeisac(cs, ISAC_MASK, 0);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_TEST:
+		return (0);
 	}
-	return(0);
+	return (0);
 }
 
 static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
@@ -154,17 +154,17 @@ static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
 	u32 cfg;
 
 	if (pci_enable_device(dev_netjet))
-		return(0);
+		return (0);
 	pci_set_master(dev_netjet);
 	cs->irq = dev_netjet->irq;
 	if (!cs->irq) {
 		printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
-		return(0);
+		return (0);
 	}
 	cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
 	if (!cs->hw.njet.base) {
 		printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
-		return(0);
+		return (0);
 	}
 	/* the TJ300 and TJ320 must be detected, the IRQ handling is different
 	 * unfortunately the chips use the same device ID, but the TJ320 has
@@ -177,14 +177,14 @@ static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
 		cs->subtyp = 0; /* TJ300 */
 	/* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
 	if ((dev_netjet->subsystem_vendor == 0x55) &&
-		(dev_netjet->subsystem_device == 0x02)) {
+	    (dev_netjet->subsystem_device == 0x02)) {
 		printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
 		printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
-		return(0);
+		return (0);
 	}
 	/* end new code */
 
-	return(1);
+	return (1);
 }
 
 static int __devinit njs_cs_init(struct IsdnCard *card,
@@ -209,18 +209,18 @@ static int __devinit njs_cs_init(struct IsdnCard *card,
 	byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
 	byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
 
-	switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
+	switch (((NETjet_ReadIC(cs, ISAC_RBCH) >> 5) & 3))
 	{
-		case 0 :
-			return 1;	/* end loop */
+	case 0:
+		return 1;	/* end loop */
 
-		case 3 :
-			printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
-			return -1;	/* continue looping */
+	case 3:
+		printk(KERN_WARNING "NETjet-S: NETspider-U PCI card found\n");
+		return -1;	/* continue looping */
 
-		default :
-			printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
-			return 0;	/* end loop & function */
+	default:
+		printk(KERN_WARNING "NETjet-S: No PCI card found\n");
+		return 0;	/* end loop & function */
 	}
 	return 1;			/* end loop */
 }
@@ -231,8 +231,8 @@ static int __devinit njs_cs_init_rest(struct IsdnCard *card,
 	const int bytecnt = 256;
 
 	printk(KERN_INFO
-		"NETjet-S: %s card configured at %#lx IRQ %d\n",
-		cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
+	       "NETjet-S: %s card configured at %#lx IRQ %d\n",
+	       cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
 	if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
 		printk(KERN_WARNING
 		       "HiSax: NETjet-S config port %#lx-%#lx already in use\n",
@@ -271,24 +271,24 @@ setup_netjet_s(struct IsdnCard *card)
 	strcpy(tmp, NETjet_S_revision);
 	printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
 	if (cs->typ != ISDN_CTYPE_NETJET_S)
-		return(0);
+		return (0);
 	test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
 
-	for ( ;; )
+	for (;;)
 	{
 		if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
-			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
+							PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
 			ret = njs_pci_probe(dev_netjet, cs);
 			if (!ret)
-				return(0);
+				return (0);
 		} else {
 			printk(KERN_WARNING "NETjet-S: No PCI card found\n");
-			return(0);
+			return (0);
 		}
 
 		ret = njs_cs_init(card, cs);
 		if (!ret)
-			return(0);
+			return (0);
 		if (ret > 0)
 			break;
 		/* otherwise, ret < 0, continue looping */