Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 15 insertions, 15 deletions

diff --git a/drivers/isdn/hysdn/boardergo.h b/drivers/isdn/hysdn/boardergo.h
index c59422aa8c3f..e99bd81c4034 100644
--- a/drivers/isdn/hysdn/boardergo.h
+++ b/drivers/isdn/hysdn/boardergo.h
@@ -23,8 +23,8 @@
 
 /* following DPRAM layout copied from OS2-driver boarderg.h */
 typedef struct ErgDpram_tag {
-/*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE];
-/*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE];
+	/*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE];
+	/*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE];
 
 	/*1C00 */ unsigned char bSoftUart[SIZE_RSV_SOFT_UART];
 	/* size 0x1B0 */
@@ -37,22 +37,22 @@ typedef struct ErgDpram_tag {
 	/*1DB9  unsigned long ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */
 	/*1DF0 */
 
-/*1DF0 */ unsigned short volatile ToHyChannel;
-/*1DF2 */ unsigned short volatile ToHySize;
+	/*1DF0 */ unsigned short volatile ToHyChannel;
+	/*1DF2 */ unsigned short volatile ToHySize;
 	/*1DF4 */ unsigned char volatile ToHyFlag;
 	/* !=0: msg for Hy waiting */
 	/*1DF5 */ unsigned char volatile ToPcFlag;
 	/* !=0: msg for PC waiting */
-/*1DF6 */ unsigned short volatile ToPcChannel;
-/*1DF8 */ unsigned short volatile ToPcSize;
+	/*1DF6 */ unsigned short volatile ToPcChannel;
+	/*1DF8 */ unsigned short volatile ToPcSize;
 	/*1DFA */ unsigned char bRes1DBA[0x1E00 - 0x1DFA];
 	/* 6 bytes */
 
-/*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00];
-/*1F00 */ unsigned long TrapTable[62];
+	/*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00];
+	/*1F00 */ unsigned long TrapTable[62];
 	/*1FF8 */ unsigned char bRes1FF8[0x1FFB - 0x1FF8];
 	/* low part of reset vetor */
-/*1FFB */ unsigned char ToPcIntMetro;
+	/*1FFB */ unsigned char ToPcIntMetro;
 	/* notes:
 	 * - metro has 32-bit boot ram - accessing
 	 *   ToPcInt and ToHyInt would be the same;
@@ -65,13 +65,13 @@ typedef struct ErgDpram_tag {
 	 *   so E1 side should NOT change this byte
 	 *   when writing!
 	 */
-/*1FFC */ unsigned char volatile ToHyNoDpramErrLog;
+	/*1FFC */ unsigned char volatile ToHyNoDpramErrLog;
 	/* note: ToHyNoDpramErrLog is used to inform
 	 *       boot loader, not to use DPRAM based
 	 *       ErrLog; when DOS driver is rewritten
 	 *       this becomes obsolete
 	 */
-/*1FFD */ unsigned char bRes1FFD;
+	/*1FFD */ unsigned char bRes1FFD;
 	/*1FFE */ unsigned char ToPcInt;
 	/* E1_intclear; on CHAMP2: E1_intset   */
 	/*1FFF */ unsigned char ToHyInt;
@@ -85,16 +85,16 @@ typedef struct ErgDpram_tag {
 #define PCI9050_INTR_REG    0x4C	/* Interrupt register */
 #define PCI9050_USER_IO     0x51	/* User I/O  register */
 
-				    /* bitmask for PCI9050_INTR_REG: */
+/* bitmask for PCI9050_INTR_REG: */
 #define PCI9050_INTR_REG_EN1    0x01	/* 1= enable (def.), 0= disable */
 #define PCI9050_INTR_REG_POL1   0x02	/* 1= active high (def.), 0= active low */
 #define PCI9050_INTR_REG_STAT1  0x04	/* 1= intr. active, 0= intr. not active (def.) */
 #define PCI9050_INTR_REG_ENPCI  0x40	/* 1= PCI interrupts enable (def.) */
 
-				    /* bitmask for PCI9050_USER_IO: */
+/* bitmask for PCI9050_USER_IO: */
 #define PCI9050_USER_IO_EN3     0x02	/* 1= disable      , 0= enable (def.) */
 #define PCI9050_USER_IO_DIR3    0x04	/* 1= output (def.), 0= input         */
 #define PCI9050_USER_IO_DAT3    0x08	/* 1= high (def.)  , 0= low           */
 
-#define PCI9050_E1_RESET    (                     PCI9050_USER_IO_DIR3)		/* 0x04 */
-#define PCI9050_E1_RUN      (PCI9050_USER_IO_DAT3|PCI9050_USER_IO_DIR3)		/* 0x0C */
+#define PCI9050_E1_RESET    (PCI9050_USER_IO_DIR3)		/* 0x04 */
+#define PCI9050_E1_RUN      (PCI9050_USER_IO_DAT3 | PCI9050_USER_IO_DIR3)		/* 0x0C */