[media] cec: add CEC_CAP_NEEDS_HPD

Add a new capability CEC_CAP_NEEDS_HPD. If this capability is set
then the hardware can only use CEC if the HDMI Hotplug Detect pin
is high. Such hardware cannot handle the corner case in the CEC specification
where it is possible to transmit messages even if no hotplug signal is
present (needed for some displays that turn off the HPD when in standby,
but still have CEC enabled).

Typically hardware that needs this capability have the HPD wired to the CEC
block, often to a 'power' or 'active' pin.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 14 insertions, 6 deletions

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index bd76c15ade4f..bf45977b2823 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -368,6 +368,8 @@ int cec_thread_func(void *_adap)
 			 * transmit should be canceled.
 			 */
 			err = wait_event_interruptible_timeout(adap->kthread_waitq,
+				(adap->needs_hpd &&
+				 (!adap->is_configured && !adap->is_configuring)) ||
 				kthread_should_stop() ||
 				(!adap->transmitting &&
 				 !list_empty(&adap->transmit_queue)),
@@ -383,7 +385,9 @@ int cec_thread_func(void *_adap)
 
 		mutex_lock(&adap->lock);
 
-		if (kthread_should_stop()) {
+		if ((adap->needs_hpd &&
+		     (!adap->is_configured && !adap->is_configuring)) ||
+		    kthread_should_stop()) {
 			cec_flush(adap);
 			goto unlock;
 		}
@@ -682,7 +686,7 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
 		return -EINVAL;
 	}
 	if (!adap->is_configured && !adap->is_configuring) {
-		if (msg->msg[0] != 0xf0) {
+		if (adap->needs_hpd || msg->msg[0] != 0xf0) {
 			dprintk(1, "%s: adapter is unconfigured\n", __func__);
 			return -ENONET;
 		}
@@ -1158,7 +1162,9 @@ static int cec_config_log_addr(struct cec_adapter *adap,
  */
 static void cec_adap_unconfigure(struct cec_adapter *adap)
 {
-	WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID));
+	if (!adap->needs_hpd ||
+	    adap->phys_addr != CEC_PHYS_ADDR_INVALID)
+		WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID));
 	adap->log_addrs.log_addr_mask = 0;
 	adap->is_configuring = false;
 	adap->is_configured = false;
@@ -1387,6 +1393,8 @@ void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
 	if (phys_addr == adap->phys_addr || adap->devnode.unregistered)
 		return;
 
+	dprintk(1, "new physical address %x.%x.%x.%x\n",
+		cec_phys_addr_exp(phys_addr));
 	if (phys_addr == CEC_PHYS_ADDR_INVALID ||
 	    adap->phys_addr != CEC_PHYS_ADDR_INVALID) {
 		adap->phys_addr = CEC_PHYS_ADDR_INVALID;
@@ -1396,7 +1404,7 @@ void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
 		if (adap->monitor_all_cnt)
 			WARN_ON(call_op(adap, adap_monitor_all_enable, false));
 		mutex_lock(&adap->devnode.lock);
-		if (list_empty(&adap->devnode.fhs))
+		if (adap->needs_hpd || list_empty(&adap->devnode.fhs))
 			WARN_ON(adap->ops->adap_enable(adap, false));
 		mutex_unlock(&adap->devnode.lock);
 		if (phys_addr == CEC_PHYS_ADDR_INVALID)
@@ -1404,7 +1412,7 @@ void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
 	}
 
 	mutex_lock(&adap->devnode.lock);
-	if (list_empty(&adap->devnode.fhs) &&
+	if ((adap->needs_hpd || list_empty(&adap->devnode.fhs)) &&
 	    adap->ops->adap_enable(adap, true)) {
 		mutex_unlock(&adap->devnode.lock);
 		return;
@@ -1412,7 +1420,7 @@ void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
 
 	if (adap->monitor_all_cnt &&
 	    call_op(adap, adap_monitor_all_enable, true)) {
-		if (list_empty(&adap->devnode.fhs))
+		if (adap->needs_hpd || list_empty(&adap->devnode.fhs))
 			WARN_ON(adap->ops->adap_enable(adap, false));
 		mutex_unlock(&adap->devnode.lock);
 		return;