[media] drxk_hard: Don't use CamelCase

X-Patchwork-Delegate: mchehab@redhat.com
Thare are lots of CamelCase warnings produced by checkpatch.pl.
This weren't fixed at the time the driver got submitted due
to the lack of manpower do to such cleanup.
Now that I have one script that automates this task, cleans
it. That makes the driver almost checkpatch-compliant,
except for 80 column warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 124 insertions, 124 deletions

diff --git a/drivers/media/dvb-frontends/drxk_hard.h b/drivers/media/dvb-frontends/drxk_hard.h
index b8424f15f9a6..db87a6d75720 100644
--- a/drivers/media/dvb-frontends/drxk_hard.h
+++ b/drivers/media/dvb-frontends/drxk_hard.h
@@ -46,7 +46,7 @@
 #define     IQM_RC_ADJ_SEL_B_QAM                                            0x1
 #define     IQM_RC_ADJ_SEL_B_VSB                                            0x2
 
-enum OperationMode {
+enum operation_mode {
 	OM_NONE,
 	OM_QAM_ITU_A,
 	OM_QAM_ITU_B,
@@ -54,7 +54,7 @@ enum OperationMode {
 	OM_DVBT
 };
 
-enum DRXPowerMode {
+enum drx_power_mode {
 	DRX_POWER_UP = 0,
 	DRX_POWER_MODE_1,
 	DRX_POWER_MODE_2,
@@ -93,8 +93,8 @@ enum DRXPowerMode {
 #endif
 
 
-enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF };
-enum EDrxkState {
+enum agc_ctrl_mode { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF };
+enum e_drxk_state {
 	DRXK_UNINITIALIZED = 0,
 	DRXK_STOPPED,
 	DRXK_DTV_STARTED,
@@ -103,7 +103,7 @@ enum EDrxkState {
 	DRXK_NO_DEV			/* If drxk init failed */
 };
 
-enum EDrxkCoefArrayIndex {
+enum e_drxk_coef_array_index {
 	DRXK_COEF_IDX_MN = 0,
 	DRXK_COEF_IDX_FM    ,
 	DRXK_COEF_IDX_L     ,
@@ -113,13 +113,13 @@ enum EDrxkCoefArrayIndex {
 	DRXK_COEF_IDX_I     ,
 	DRXK_COEF_IDX_MAX
 };
-enum EDrxkSifAttenuation {
+enum e_drxk_sif_attenuation {
 	DRXK_SIF_ATTENUATION_0DB,
 	DRXK_SIF_ATTENUATION_3DB,
 	DRXK_SIF_ATTENUATION_6DB,
 	DRXK_SIF_ATTENUATION_9DB
 };
-enum EDrxkConstellation {
+enum e_drxk_constellation {
 	DRX_CONSTELLATION_BPSK = 0,
 	DRX_CONSTELLATION_QPSK,
 	DRX_CONSTELLATION_PSK8,
@@ -133,7 +133,7 @@ enum EDrxkConstellation {
 	DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
 	DRX_CONSTELLATION_AUTO    = DRX_AUTO
 };
-enum EDrxkInterleaveMode {
+enum e_drxk_interleave_mode {
 	DRXK_QAM_I12_J17    = 16,
 	DRXK_QAM_I_UNKNOWN  = DRX_UNKNOWN
 };
@@ -144,14 +144,14 @@ enum {
 	DRXK_SPIN_UNKNOWN
 };
 
-enum DRXKCfgDvbtSqiSpeed {
+enum drxk_cfg_dvbt_sqi_speed {
 	DRXK_DVBT_SQI_SPEED_FAST = 0,
 	DRXK_DVBT_SQI_SPEED_MEDIUM,
 	DRXK_DVBT_SQI_SPEED_SLOW,
 	DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
 } ;
 
-enum DRXFftmode_t {
+enum drx_fftmode_t {
 	DRX_FFTMODE_2K = 0,
 	DRX_FFTMODE_4K,
 	DRX_FFTMODE_8K,
@@ -159,40 +159,40 @@ enum DRXFftmode_t {
 	DRX_FFTMODE_AUTO    = DRX_AUTO
 };
 
-enum DRXMPEGStrWidth_t {
+enum drxmpeg_str_width_t {
 	DRX_MPEG_STR_WIDTH_1,
 	DRX_MPEG_STR_WIDTH_8
 };
 
-enum DRXQamLockRange_t {
+enum drx_qam_lock_range_t {
 	DRX_QAM_LOCKRANGE_NORMAL,
 	DRX_QAM_LOCKRANGE_EXTENDED
 };
 
-struct DRXKCfgDvbtEchoThres_t {
+struct drxk_cfg_dvbt_echo_thres_t {
 	u16             threshold;
-	enum DRXFftmode_t      fftMode;
+	enum drx_fftmode_t      fft_mode;
 } ;
 
-struct SCfgAgc {
-	enum AGC_CTRL_MODE     ctrlMode;        /* off, user, auto */
-	u16            outputLevel;     /* range dependent on AGC */
-	u16            minOutputLevel;  /* range dependent on AGC */
-	u16            maxOutputLevel;  /* range dependent on AGC */
+struct s_cfg_agc {
+	enum agc_ctrl_mode     ctrl_mode;        /* off, user, auto */
+	u16            output_level;     /* range dependent on AGC */
+	u16            min_output_level;  /* range dependent on AGC */
+	u16            max_output_level;  /* range dependent on AGC */
 	u16            speed;           /* range dependent on AGC */
 	u16            top;             /* rf-agc take over point */
-	u16            cutOffCurrent;   /* rf-agc is accelerated if output current
+	u16            cut_off_current;   /* rf-agc is accelerated if output current
 					   is below cut-off current */
-	u16            IngainTgtMax;
-	u16            FastClipCtrlDelay;
+	u16            ingain_tgt_max;
+	u16            fast_clip_ctrl_delay;
 };
 
-struct SCfgPreSaw {
+struct s_cfg_pre_saw {
 	u16        reference; /* pre SAW reference value, range 0 .. 31 */
-	bool          usePreSaw; /* TRUE algorithms must use pre SAW sense */
+	bool          use_pre_saw; /* TRUE algorithms must use pre SAW sense */
 };
 
-struct DRXKOfdmScCmd_t {
+struct drxk_ofdm_sc_cmd_t {
 	u16 cmd;        /**< Command number */
 	u16 subcmd;     /**< Sub-command parameter*/
 	u16 param0;     /**< General purpous param */
@@ -213,121 +213,121 @@ struct drxk_state {
 
 	struct mutex mutex;
 
-	u32    m_Instance;           /**< Channel 1,2,3 or 4 */
-
-	int    m_ChunkSize;
-	u8 Chunk[256];
-
-	bool   m_hasLNA;
-	bool   m_hasDVBT;
-	bool   m_hasDVBC;
-	bool   m_hasAudio;
-	bool   m_hasATV;
-	bool   m_hasOOB;
-	bool   m_hasSAWSW;         /**< TRUE if mat_tx is available */
-	bool   m_hasGPIO1;         /**< TRUE if mat_rx is available */
-	bool   m_hasGPIO2;         /**< TRUE if GPIO is available */
-	bool   m_hasIRQN;          /**< TRUE if IRQN is available */
-	u16    m_oscClockFreq;
-	u16    m_HICfgTimingDiv;
-	u16    m_HICfgBridgeDelay;
-	u16    m_HICfgWakeUpKey;
-	u16    m_HICfgTimeout;
-	u16    m_HICfgCtrl;
-	s32    m_sysClockFreq;      /**< system clock frequency in kHz */
-
-	enum EDrxkState    m_DrxkState;      /**< State of Drxk (init,stopped,started) */
-	enum OperationMode m_OperationMode;  /**< digital standards */
-	struct SCfgAgc     m_vsbRfAgcCfg;    /**< settings for VSB RF-AGC */
-	struct SCfgAgc     m_vsbIfAgcCfg;    /**< settings for VSB IF-AGC */
-	u16                m_vsbPgaCfg;      /**< settings for VSB PGA */
-	struct SCfgPreSaw  m_vsbPreSawCfg;   /**< settings for pre SAW sense */
+	u32    m_instance;           /**< Channel 1,2,3 or 4 */
+
+	int    m_chunk_size;
+	u8 chunk[256];
+
+	bool   m_has_lna;
+	bool   m_has_dvbt;
+	bool   m_has_dvbc;
+	bool   m_has_audio;
+	bool   m_has_atv;
+	bool   m_has_oob;
+	bool   m_has_sawsw;         /* TRUE if mat_tx is available */
+	bool   m_has_gpio1;         /* TRUE if mat_rx is available */
+	bool   m_has_gpio2;         /* TRUE if GPIO is available */
+	bool   m_has_irqn;          /* TRUE if IRQN is available */
+	u16    m_osc_clock_freq;
+	u16    m_hi_cfg_timing_div;
+	u16    m_hi_cfg_bridge_delay;
+	u16    m_hi_cfg_wake_up_key;
+	u16    m_hi_cfg_timeout;
+	u16    m_hi_cfg_ctrl;
+	s32    m_sys_clock_freq;      /**< system clock frequency in kHz */
+
+	enum e_drxk_state    m_drxk_state;      /**< State of Drxk (init,stopped,started) */
+	enum operation_mode m_operation_mode;  /**< digital standards */
+	struct s_cfg_agc     m_vsb_rf_agc_cfg;    /**< settings for VSB RF-AGC */
+	struct s_cfg_agc     m_vsb_if_agc_cfg;    /**< settings for VSB IF-AGC */
+	u16                m_vsb_pga_cfg;      /**< settings for VSB PGA */
+	struct s_cfg_pre_saw  m_vsb_pre_saw_cfg;   /**< settings for pre SAW sense */
 	s32    m_Quality83percent;  /**< MER level (*0.1 dB) for 83% quality indication */
 	s32    m_Quality93percent;  /**< MER level (*0.1 dB) for 93% quality indication */
-	bool   m_smartAntInverted;
-	bool   m_bDebugEnableBridge;
-	bool   m_bPDownOpenBridge;  /**< only open DRXK bridge before power-down once it has been accessed */
-	bool   m_bPowerDown;        /**< Power down when not used */
-
-	u32    m_IqmFsRateOfs;      /**< frequency shift as written to DRXK register (28bit fixpoint) */
-
-	bool   m_enableMPEGOutput;  /**< If TRUE, enable MPEG output */
-	bool   m_insertRSByte;      /**< If TRUE, insert RS byte */
-	bool   m_enableParallel;    /**< If TRUE, parallel out otherwise serial */
-	bool   m_invertDATA;        /**< If TRUE, invert DATA signals */
-	bool   m_invertERR;         /**< If TRUE, invert ERR signal */
-	bool   m_invertSTR;         /**< If TRUE, invert STR signals */
-	bool   m_invertVAL;         /**< If TRUE, invert VAL signals */
-	bool   m_invertCLK;         /**< If TRUE, invert CLK signals */
-	bool   m_DVBCStaticCLK;
-	bool   m_DVBTStaticCLK;     /**< If TRUE, static MPEG clockrate will
+	bool   m_smart_ant_inverted;
+	bool   m_b_debug_enable_bridge;
+	bool   m_b_p_down_open_bridge;  /**< only open DRXK bridge before power-down once it has been accessed */
+	bool   m_b_power_down;        /**< Power down when not used */
+
+	u32    m_iqm_fs_rate_ofs;      /**< frequency shift as written to DRXK register (28bit fixpoint) */
+
+	bool   m_enable_mpeg_output;  /**< If TRUE, enable MPEG output */
+	bool   m_insert_rs_byte;      /**< If TRUE, insert RS byte */
+	bool   m_enable_parallel;    /**< If TRUE, parallel out otherwise serial */
+	bool   m_invert_data;        /**< If TRUE, invert DATA signals */
+	bool   m_invert_err;         /**< If TRUE, invert ERR signal */
+	bool   m_invert_str;         /**< If TRUE, invert STR signals */
+	bool   m_invert_val;         /**< If TRUE, invert VAL signals */
+	bool   m_invert_clk;         /**< If TRUE, invert CLK signals */
+	bool   m_dvbc_static_clk;
+	bool   m_dvbt_static_clk;     /**< If TRUE, static MPEG clockrate will
 					 be used, otherwise clockrate will
 					 adapt to the bitrate of the TS */
-	u32    m_DVBTBitrate;
-	u32    m_DVBCBitrate;
+	u32    m_dvbt_bitrate;
+	u32    m_dvbc_bitrate;
 
-	u8     m_TSDataStrength;
-	u8     m_TSClockkStrength;
+	u8     m_ts_data_strength;
+	u8     m_ts_clockk_strength;
 
 	bool   m_itut_annex_c;      /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
 
-	enum DRXMPEGStrWidth_t  m_widthSTR;    /**< MPEG start width */
-	u32    m_mpegTsStaticBitrate;          /**< Maximum bitrate in b/s in case
+	enum drxmpeg_str_width_t  m_width_str;    /**< MPEG start width */
+	u32    m_mpeg_ts_static_bitrate;          /**< Maximum bitrate in b/s in case
 						    static clockrate is selected */
 
-	/* LARGE_INTEGER   m_StartTime; */     /**< Contains the time of the last demod start */
-	s32    m_MpegLockTimeOut;      /**< WaitForLockStatus Timeout (counts from start time) */
-	s32    m_DemodLockTimeOut;     /**< WaitForLockStatus Timeout (counts from start time) */
-
-	bool   m_disableTEIhandling;
-
-	bool   m_RfAgcPol;
-	bool   m_IfAgcPol;
-
-	struct SCfgAgc    m_atvRfAgcCfg;  /**< settings for ATV RF-AGC */
-	struct SCfgAgc    m_atvIfAgcCfg;  /**< settings for ATV IF-AGC */
-	struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */
-	bool              m_phaseCorrectionBypass;
-	s16               m_atvTopVidPeak;
-	u16               m_atvTopNoiseTh;
-	enum EDrxkSifAttenuation m_sifAttenuation;
-	bool              m_enableCVBSOutput;
-	bool              m_enableSIFOutput;
-	bool              m_bMirrorFreqSpect;
-	enum EDrxkConstellation  m_Constellation; /**< Constellation type of the channel */
-	u32               m_CurrSymbolRate;       /**< Current QAM symbol rate */
-	struct SCfgAgc    m_qamRfAgcCfg;          /**< settings for QAM RF-AGC */
-	struct SCfgAgc    m_qamIfAgcCfg;          /**< settings for QAM IF-AGC */
-	u16               m_qamPgaCfg;            /**< settings for QAM PGA */
-	struct SCfgPreSaw m_qamPreSawCfg;         /**< settings for QAM pre SAW sense */
-	enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */
-	u16               m_fecRsPlen;
-	u16               m_fecRsPrescale;
-
-	enum DRXKCfgDvbtSqiSpeed m_sqiSpeed;
-
-	u16               m_GPIO;
-	u16               m_GPIOCfg;
-
-	struct SCfgAgc    m_dvbtRfAgcCfg;     /**< settings for QAM RF-AGC */
-	struct SCfgAgc    m_dvbtIfAgcCfg;     /**< settings for QAM IF-AGC */
-	struct SCfgPreSaw m_dvbtPreSawCfg;    /**< settings for QAM pre SAW sense */
-
-	u16               m_agcFastClipCtrlDelay;
-	bool              m_adcCompPassed;
+	/* LARGE_INTEGER   m_startTime; */     /**< Contains the time of the last demod start */
+	s32    m_mpeg_lock_time_out;      /**< WaitForLockStatus Timeout (counts from start time) */
+	s32    m_demod_lock_time_out;     /**< WaitForLockStatus Timeout (counts from start time) */
+
+	bool   m_disable_te_ihandling;
+
+	bool   m_rf_agc_pol;
+	bool   m_if_agc_pol;
+
+	struct s_cfg_agc    m_atv_rf_agc_cfg;  /**< settings for ATV RF-AGC */
+	struct s_cfg_agc    m_atv_if_agc_cfg;  /**< settings for ATV IF-AGC */
+	struct s_cfg_pre_saw m_atv_pre_saw_cfg; /**< settings for ATV pre SAW sense */
+	bool              m_phase_correction_bypass;
+	s16               m_atv_top_vid_peak;
+	u16               m_atv_top_noise_th;
+	enum e_drxk_sif_attenuation m_sif_attenuation;
+	bool              m_enable_cvbs_output;
+	bool              m_enable_sif_output;
+	bool              m_b_mirror_freq_spect;
+	enum e_drxk_constellation  m_constellation; /**< constellation type of the channel */
+	u32               m_curr_symbol_rate;       /**< Current QAM symbol rate */
+	struct s_cfg_agc    m_qam_rf_agc_cfg;          /**< settings for QAM RF-AGC */
+	struct s_cfg_agc    m_qam_if_agc_cfg;          /**< settings for QAM IF-AGC */
+	u16               m_qam_pga_cfg;            /**< settings for QAM PGA */
+	struct s_cfg_pre_saw m_qam_pre_saw_cfg;         /**< settings for QAM pre SAW sense */
+	enum e_drxk_interleave_mode m_qam_interleave_mode; /**< QAM Interleave mode */
+	u16               m_fec_rs_plen;
+	u16               m_fec_rs_prescale;
+
+	enum drxk_cfg_dvbt_sqi_speed m_sqi_speed;
+
+	u16               m_gpio;
+	u16               m_gpio_cfg;
+
+	struct s_cfg_agc    m_dvbt_rf_agc_cfg;     /**< settings for QAM RF-AGC */
+	struct s_cfg_agc    m_dvbt_if_agc_cfg;     /**< settings for QAM IF-AGC */
+	struct s_cfg_pre_saw m_dvbt_pre_saw_cfg;    /**< settings for QAM pre SAW sense */
+
+	u16               m_agcfast_clip_ctrl_delay;
+	bool              m_adc_comp_passed;
 	u16               m_adcCompCoef[64];
-	u16               m_adcState;
+	u16               m_adc_state;
 
 	u8               *m_microcode;
 	int               m_microcode_length;
-	bool		  m_DRXK_A3_ROM_CODE;
-	bool              m_DRXK_A3_PATCH_CODE;
+	bool		  m_drxk_a3_rom_code;
+	bool              m_drxk_a3_patch_code;
 
 	bool              m_rfmirror;
-	u8                m_deviceSpin;
-	u32               m_iqmRcRate;
+	u8                m_device_spin;
+	u32               m_iqm_rc_rate;
 
-	enum DRXPowerMode m_currentPowerMode;
+	enum drx_power_mode m_current_power_mode;
 
 	/* when true, avoids other devices to use the I2C bus */
 	bool		  drxk_i2c_exclusive_lock;
@@ -337,7 +337,7 @@ struct drxk_state {
 	 * at struct drxk_config.
 	 */
 
-	u16	UIO_mask;	/* Bits used by UIO */
+	u16	uio_mask;	/* Bits used by UIO */
 
 	bool	enable_merr_cfg;
 	bool	single_master;