[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 364 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/drxk_hard.h b/drivers/media/dvb-frontends/drxk_hard.h
new file mode 100644
index 000000000000..6bb9fc4a7b96
--- /dev/null
+++ b/drivers/media/dvb-frontends/drxk_hard.h
@@ -0,0 +1,364 @@
+#include "drxk_map.h"
+
+#define DRXK_VERSION_MAJOR 0
+#define DRXK_VERSION_MINOR 9
+#define DRXK_VERSION_PATCH 4300
+
+#define HI_I2C_DELAY        42
+#define HI_I2C_BRIDGE_DELAY 350
+#define DRXK_MAX_RETRIES    100
+
+#define DRIVER_4400 1
+
+#define DRXX_JTAGID   0x039210D9
+#define DRXX_J_JTAGID 0x239310D9
+#define DRXX_K_JTAGID 0x039210D9
+
+#define DRX_UNKNOWN     254
+#define DRX_AUTO        255
+
+#define DRX_SCU_READY   0
+#define DRXK_MAX_WAITTIME (200)
+#define SCU_RESULT_OK      0
+#define SCU_RESULT_SIZE   -4
+#define SCU_RESULT_INVPAR -3
+#define SCU_RESULT_UNKSTD -2
+#define SCU_RESULT_UNKCMD -1
+
+#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT
+#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200)
+#endif
+
+#define DRXK_8VSB_MPEG_BIT_RATE     19392658UL  /*bps*/
+#define DRXK_DVBT_MPEG_BIT_RATE     32000000UL  /*bps*/
+#define DRXK_QAM16_MPEG_BIT_RATE    27000000UL  /*bps*/
+#define DRXK_QAM32_MPEG_BIT_RATE    33000000UL  /*bps*/
+#define DRXK_QAM64_MPEG_BIT_RATE    40000000UL  /*bps*/
+#define DRXK_QAM128_MPEG_BIT_RATE   46000000UL  /*bps*/
+#define DRXK_QAM256_MPEG_BIT_RATE   52000000UL  /*bps*/
+#define DRXK_MAX_MPEG_BIT_RATE      52000000UL  /*bps*/
+
+#define   IQM_CF_OUT_ENA_OFDM__M                                            0x4
+#define     IQM_FS_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_FS_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_FS_ADJ_SEL_B_VSB                                            0x2
+#define     IQM_RC_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_RC_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_RC_ADJ_SEL_B_VSB                                            0x2
+
+enum OperationMode {
+	OM_NONE,
+	OM_QAM_ITU_A,
+	OM_QAM_ITU_B,
+	OM_QAM_ITU_C,
+	OM_DVBT
+};
+
+enum DRXPowerMode {
+	DRX_POWER_UP = 0,
+	DRX_POWER_MODE_1,
+	DRX_POWER_MODE_2,
+	DRX_POWER_MODE_3,
+	DRX_POWER_MODE_4,
+	DRX_POWER_MODE_5,
+	DRX_POWER_MODE_6,
+	DRX_POWER_MODE_7,
+	DRX_POWER_MODE_8,
+
+	DRX_POWER_MODE_9,
+	DRX_POWER_MODE_10,
+	DRX_POWER_MODE_11,
+	DRX_POWER_MODE_12,
+	DRX_POWER_MODE_13,
+	DRX_POWER_MODE_14,
+	DRX_POWER_MODE_15,
+	DRX_POWER_MODE_16,
+	DRX_POWER_DOWN = 255
+};
+
+
+/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */
+#ifndef DRXK_POWER_DOWN_OFDM
+#define DRXK_POWER_DOWN_OFDM        DRX_POWER_MODE_1
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down core (sysclk) */
+#ifndef DRXK_POWER_DOWN_CORE
+#define DRXK_POWER_DOWN_CORE        DRX_POWER_MODE_9
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */
+#ifndef DRXK_POWER_DOWN_PLL
+#define DRXK_POWER_DOWN_PLL         DRX_POWER_MODE_10
+#endif
+
+
+enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF };
+enum EDrxkState {
+	DRXK_UNINITIALIZED = 0,
+	DRXK_STOPPED,
+	DRXK_DTV_STARTED,
+	DRXK_ATV_STARTED,
+	DRXK_POWERED_DOWN,
+	DRXK_NO_DEV			/* If drxk init failed */
+};
+
+enum EDrxkCoefArrayIndex {
+	DRXK_COEF_IDX_MN = 0,
+	DRXK_COEF_IDX_FM    ,
+	DRXK_COEF_IDX_L     ,
+	DRXK_COEF_IDX_LP    ,
+	DRXK_COEF_IDX_BG    ,
+	DRXK_COEF_IDX_DK    ,
+	DRXK_COEF_IDX_I     ,
+	DRXK_COEF_IDX_MAX
+};
+enum EDrxkSifAttenuation {
+	DRXK_SIF_ATTENUATION_0DB,
+	DRXK_SIF_ATTENUATION_3DB,
+	DRXK_SIF_ATTENUATION_6DB,
+	DRXK_SIF_ATTENUATION_9DB
+};
+enum EDrxkConstellation {
+	DRX_CONSTELLATION_BPSK = 0,
+	DRX_CONSTELLATION_QPSK,
+	DRX_CONSTELLATION_PSK8,
+	DRX_CONSTELLATION_QAM16,
+	DRX_CONSTELLATION_QAM32,
+	DRX_CONSTELLATION_QAM64,
+	DRX_CONSTELLATION_QAM128,
+	DRX_CONSTELLATION_QAM256,
+	DRX_CONSTELLATION_QAM512,
+	DRX_CONSTELLATION_QAM1024,
+	DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
+	DRX_CONSTELLATION_AUTO    = DRX_AUTO
+};
+enum EDrxkInterleaveMode {
+	DRXK_QAM_I12_J17    = 16,
+	DRXK_QAM_I_UNKNOWN  = DRX_UNKNOWN
+};
+enum {
+	DRXK_SPIN_A1 = 0,
+	DRXK_SPIN_A2,
+	DRXK_SPIN_A3,
+	DRXK_SPIN_UNKNOWN
+};
+
+enum DRXKCfgDvbtSqiSpeed {
+	DRXK_DVBT_SQI_SPEED_FAST = 0,
+	DRXK_DVBT_SQI_SPEED_MEDIUM,
+	DRXK_DVBT_SQI_SPEED_SLOW,
+	DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
+} ;
+
+enum DRXFftmode_t {
+	DRX_FFTMODE_2K = 0,
+	DRX_FFTMODE_4K,
+	DRX_FFTMODE_8K,
+	DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN,
+	DRX_FFTMODE_AUTO    = DRX_AUTO
+};
+
+enum DRXMPEGStrWidth_t {
+	DRX_MPEG_STR_WIDTH_1,
+	DRX_MPEG_STR_WIDTH_8
+};
+
+enum DRXQamLockRange_t {
+	DRX_QAM_LOCKRANGE_NORMAL,
+	DRX_QAM_LOCKRANGE_EXTENDED
+};
+
+struct DRXKCfgDvbtEchoThres_t {
+	u16             threshold;
+	enum DRXFftmode_t      fftMode;
+} ;
+
+struct SCfgAgc {
+	enum AGC_CTRL_MODE     ctrlMode;        /* off, user, auto */
+	u16            outputLevel;     /* range dependent on AGC */
+	u16            minOutputLevel;  /* range dependent on AGC */
+	u16            maxOutputLevel;  /* range dependent on AGC */
+	u16            speed;           /* range dependent on AGC */
+	u16            top;             /* rf-agc take over point */
+	u16            cutOffCurrent;   /* rf-agc is accelerated if output current
+					   is below cut-off current */
+	u16            IngainTgtMax;
+	u16            FastClipCtrlDelay;
+};
+
+struct SCfgPreSaw {
+	u16        reference; /* pre SAW reference value, range 0 .. 31 */
+	bool          usePreSaw; /* TRUE algorithms must use pre SAW sense */
+};
+
+struct DRXKOfdmScCmd_t {
+	u16 cmd;        /**< Command number */
+	u16 subcmd;     /**< Sub-command parameter*/
+	u16 param0;     /**< General purpous param */
+	u16 param1;     /**< General purpous param */
+	u16 param2;     /**< General purpous param */
+	u16 param3;     /**< General purpous param */
+	u16 param4;     /**< General purpous param */
+};
+
+struct drxk_state {
+	struct dvb_frontend frontend;
+	struct dtv_frontend_properties props;
+	struct device *dev;
+
+	struct i2c_adapter *i2c;
+	u8     demod_address;
+	void  *priv;
+
+	struct mutex mutex;
+
+	u32    m_Instance;           /**< Channel 1,2,3 or 4 */
+
+	int    m_ChunkSize;
+	u8 Chunk[256];
+
+	bool   m_hasLNA;
+	bool   m_hasDVBT;
+	bool   m_hasDVBC;
+	bool   m_hasAudio;
+	bool   m_hasATV;
+	bool   m_hasOOB;
+	bool   m_hasSAWSW;         /**< TRUE if mat_tx is available */
+	bool   m_hasGPIO1;         /**< TRUE if mat_rx is available */
+	bool   m_hasGPIO2;         /**< TRUE if GPIO is available */
+	bool   m_hasIRQN;          /**< TRUE if IRQN is available */
+	u16    m_oscClockFreq;
+	u16    m_HICfgTimingDiv;
+	u16    m_HICfgBridgeDelay;
+	u16    m_HICfgWakeUpKey;
+	u16    m_HICfgTimeout;
+	u16    m_HICfgCtrl;
+	s32    m_sysClockFreq;      /**< system clock frequency in kHz */
+
+	enum EDrxkState    m_DrxkState;      /**< State of Drxk (init,stopped,started) */
+	enum OperationMode m_OperationMode;  /**< digital standards */
+	struct SCfgAgc     m_vsbRfAgcCfg;    /**< settings for VSB RF-AGC */
+	struct SCfgAgc     m_vsbIfAgcCfg;    /**< settings for VSB IF-AGC */
+	u16                m_vsbPgaCfg;      /**< settings for VSB PGA */
+	struct SCfgPreSaw  m_vsbPreSawCfg;   /**< settings for pre SAW sense */
+	s32    m_Quality83percent;  /**< MER level (*0.1 dB) for 83% quality indication */
+	s32    m_Quality93percent;  /**< MER level (*0.1 dB) for 93% quality indication */
+	bool   m_smartAntInverted;
+	bool   m_bDebugEnableBridge;
+	bool   m_bPDownOpenBridge;  /**< only open DRXK bridge before power-down once it has been accessed */
+	bool   m_bPowerDown;        /**< Power down when not used */
+
+	u32    m_IqmFsRateOfs;      /**< frequency shift as written to DRXK register (28bit fixpoint) */
+
+	bool   m_enableMPEGOutput;  /**< If TRUE, enable MPEG output */
+	bool   m_insertRSByte;      /**< If TRUE, insert RS byte */
+	bool   m_enableParallel;    /**< If TRUE, parallel out otherwise serial */
+	bool   m_invertDATA;        /**< If TRUE, invert DATA signals */
+	bool   m_invertERR;         /**< If TRUE, invert ERR signal */
+	bool   m_invertSTR;         /**< If TRUE, invert STR signals */
+	bool   m_invertVAL;         /**< If TRUE, invert VAL signals */
+	bool   m_invertCLK;         /**< If TRUE, invert CLK signals */
+	bool   m_DVBCStaticCLK;
+	bool   m_DVBTStaticCLK;     /**< If TRUE, static MPEG clockrate will
+					 be used, otherwise clockrate will
+					 adapt to the bitrate of the TS */
+	u32    m_DVBTBitrate;
+	u32    m_DVBCBitrate;
+
+	u8     m_TSDataStrength;
+	u8     m_TSClockkStrength;
+
+	bool   m_itut_annex_c;      /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */
+
+	enum DRXMPEGStrWidth_t  m_widthSTR;    /**< MPEG start width */
+	u32    m_mpegTsStaticBitrate;          /**< Maximum bitrate in b/s in case
+						    static clockrate is selected */
+
+	/* LARGE_INTEGER   m_StartTime; */     /**< Contains the time of the last demod start */
+	s32    m_MpegLockTimeOut;      /**< WaitForLockStatus Timeout (counts from start time) */
+	s32    m_DemodLockTimeOut;     /**< WaitForLockStatus Timeout (counts from start time) */
+
+	bool   m_disableTEIhandling;
+
+	bool   m_RfAgcPol;
+	bool   m_IfAgcPol;
+
+	struct SCfgAgc    m_atvRfAgcCfg;  /**< settings for ATV RF-AGC */
+	struct SCfgAgc    m_atvIfAgcCfg;  /**< settings for ATV IF-AGC */
+	struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */
+	bool              m_phaseCorrectionBypass;
+	s16               m_atvTopVidPeak;
+	u16               m_atvTopNoiseTh;
+	enum EDrxkSifAttenuation m_sifAttenuation;
+	bool              m_enableCVBSOutput;
+	bool              m_enableSIFOutput;
+	bool              m_bMirrorFreqSpect;
+	enum EDrxkConstellation  m_Constellation; /**< Constellation type of the channel */
+	u32               m_CurrSymbolRate;       /**< Current QAM symbol rate */
+	struct SCfgAgc    m_qamRfAgcCfg;          /**< settings for QAM RF-AGC */
+	struct SCfgAgc    m_qamIfAgcCfg;          /**< settings for QAM IF-AGC */
+	u16               m_qamPgaCfg;            /**< settings for QAM PGA */
+	struct SCfgPreSaw m_qamPreSawCfg;         /**< settings for QAM pre SAW sense */
+	enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */
+	u16               m_fecRsPlen;
+	u16               m_fecRsPrescale;
+
+	enum DRXKCfgDvbtSqiSpeed m_sqiSpeed;
+
+	u16               m_GPIO;
+	u16               m_GPIOCfg;
+
+	struct SCfgAgc    m_dvbtRfAgcCfg;     /**< settings for QAM RF-AGC */
+	struct SCfgAgc    m_dvbtIfAgcCfg;     /**< settings for QAM IF-AGC */
+	struct SCfgPreSaw m_dvbtPreSawCfg;    /**< settings for QAM pre SAW sense */
+
+	u16               m_agcFastClipCtrlDelay;
+	bool              m_adcCompPassed;
+	u16               m_adcCompCoef[64];
+	u16               m_adcState;
+
+	u8               *m_microcode;
+	int               m_microcode_length;
+	bool              m_DRXK_A1_PATCH_CODE;
+	bool              m_DRXK_A1_ROM_CODE;
+	bool              m_DRXK_A2_ROM_CODE;
+	bool              m_DRXK_A3_ROM_CODE;
+	bool              m_DRXK_A2_PATCH_CODE;
+	bool              m_DRXK_A3_PATCH_CODE;
+
+	bool              m_rfmirror;
+	u8                m_deviceSpin;
+	u32               m_iqmRcRate;
+
+	enum DRXPowerMode m_currentPowerMode;
+
+	/* when true, avoids other devices to use the I2C bus */
+	bool		  drxk_i2c_exclusive_lock;
+
+	/*
+	 * Configurable parameters at the driver. They stores the values found
+	 * at struct drxk_config.
+	 */
+
+	u16	UIO_mask;	/* Bits used by UIO */
+
+	bool	enable_merr_cfg;
+	bool	single_master;
+	bool	no_i2c_bridge;
+	bool	antenna_dvbt;
+	u16	antenna_gpio;
+
+	/* Firmware */
+	const char *microcode_name;
+	struct completion fw_wait_load;
+	const struct firmware *fw;
+	int qam_demod_parameter_count;
+};
+
+#define NEVER_LOCK 0
+#define NOT_LOCKED 1
+#define DEMOD_LOCK 2
+#define FEC_LOCK   3
+#define MPEG_LOCK  4
+