[media] dvb_usb_v2: move from dvb-usb to dvb-usb-v2

Move to own directory.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 1324 deletions

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
deleted file mode 100644
index fb3829a73d2d..000000000000
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ /dev/null
@@ -1,1324 +0,0 @@
-/*
- * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
- *
- * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * TODO:
- * - add smart card reader support for Conditional Access (CA)
- *
- * Card reader in Anysee is nothing more than ISO 7816 card reader.
- * There is no hardware CAM in any Anysee device sold.
- * In my understanding it should be implemented by making own module
- * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
- * module registers serial interface that can be used to communicate
- * with any ISO 7816 smart card.
- *
- * Any help according to implement serial smart card reader support
- * is highly welcome!
- */
-
-#include "anysee.h"
-#include "dvb-pll.h"
-#include "tda1002x.h"
-#include "mt352.h"
-#include "mt352_priv.h"
-#include "zl10353.h"
-#include "tda18212.h"
-#include "cx24116.h"
-#include "stv0900.h"
-#include "stv6110.h"
-#include "isl6423.h"
-#include "cxd2820r.h"
-
-/* debug */
-static int dvb_usb_anysee_debug;
-module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-static DEFINE_MUTEX(anysee_usb_mutex);
-
-static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
-	u8 *rbuf, u8 rlen)
-{
-	struct anysee_state *state = d_to_priv(d);
-	int act_len, ret, i;
-	u8 buf[64];
-
-	memcpy(&buf[0], sbuf, slen);
-	buf[60] = state->seq++;
-
-	mutex_lock(&anysee_usb_mutex);
-
-	deb_xfer(">>> ");
-	debug_dump(buf, slen, deb_xfer);
-
-	/* We need receive one message more after dvb_usb_generic_rw due
-	   to weird transaction flow, which is 1 x send + 2 x receive. */
-	ret = dvb_usbv2_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf));
-	if (ret)
-		goto error_unlock;
-
-	/* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32
-	 * (EPIPE, Broken pipe). Function supports currently msleep() as a
-	 * parameter but I would not like to use it, since according to
-	 * Documentation/timers/timers-howto.txt it should not be used such
-	 * short, under < 20ms, sleeps. Repeating failed message would be
-	 * better choice as not to add unwanted delays...
-	 * Fixing that correctly is one of those or both;
-	 * 1) use repeat if possible
-	 * 2) add suitable delay
-	 */
-
-	/* get answer, retry few times if error returned */
-	for (i = 0; i < 3; i++) {
-		/* receive 2nd answer */
-		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
-			d->props->generic_bulk_ctrl_endpoint), buf, sizeof(buf),
-			&act_len, 2000);
-
-		if (ret) {
-			deb_info("%s: recv bulk message failed: %d",
-					__func__, ret);
-		} else {
-			deb_xfer("<<< ");
-			debug_dump(buf, rlen, deb_xfer);
-
-			if (buf[63] != 0x4f)
-				deb_info("%s: cmd failed\n", __func__);
-
-			break;
-		}
-	}
-
-	if (ret) {
-		/* all retries failed, it is fatal */
-		err("%s: recv bulk message failed: %d", __func__, ret);
-		goto error_unlock;
-	}
-
-	/* read request, copy returned data to return buf */
-	if (rbuf && rlen)
-		memcpy(rbuf, buf, rlen);
-
-error_unlock:
-	mutex_unlock(&anysee_usb_mutex);
-
-	return ret;
-}
-
-static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
-{
-	u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
-	int ret;
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
-	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
-	return ret;
-}
-
-static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
-{
-	u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
-	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
-	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-}
-
-/* write single register with mask */
-static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
-	u8 mask)
-{
-	int ret;
-	u8 tmp;
-
-	/* no need for read if whole reg is written */
-	if (mask != 0xff) {
-		ret = anysee_read_reg(d, reg, &tmp);
-		if (ret)
-			return ret;
-
-		val &= mask;
-		tmp &= ~mask;
-		val |= tmp;
-	}
-
-	return anysee_write_reg(d, reg, val);
-}
-
-/* read single register with mask */
-static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val,
-	u8 mask)
-{
-	int ret, i;
-	u8 tmp;
-
-	ret = anysee_read_reg(d, reg, &tmp);
-	if (ret)
-		return ret;
-
-	tmp &= mask;
-
-	/* find position of the first bit */
-	for (i = 0; i < 8; i++) {
-		if ((mask >> i) & 0x01)
-			break;
-	}
-	*val = tmp >> i;
-
-	return 0;
-}
-
-static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
-{
-	u8 buf[] = {CMD_GET_HW_INFO};
-	return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
-}
-
-static int anysee_streaming_ctrl(struct dvb_frontend *fe, int onoff)
-{
-	u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
-	deb_info("%s: onoff:%02x\n", __func__, onoff);
-	return anysee_ctrl_msg(fe_to_d(fe), buf, sizeof(buf), NULL, 0);
-}
-
-static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
-{
-	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
-	deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
-	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-}
-
-static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
-{
-	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
-	deb_info("%s: onoff:%02x\n", __func__, onoff);
-	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-}
-
-/* I2C */
-static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-	int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int ret = 0, inc, i = 0;
-	u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	while (i < num) {
-		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
-			if (msg[i].len > 2 || msg[i+1].len > 60) {
-				ret = -EOPNOTSUPP;
-				break;
-			}
-			buf[0] = CMD_I2C_READ;
-			buf[1] = (msg[i].addr << 1) | 0x01;
-			buf[2] = msg[i].buf[0];
-			buf[3] = msg[i].buf[1];
-			buf[4] = msg[i].len-1;
-			buf[5] = msg[i+1].len;
-			ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
-				msg[i+1].len);
-			inc = 2;
-		} else {
-			if (msg[i].len > 48) {
-				ret = -EOPNOTSUPP;
-				break;
-			}
-			buf[0] = CMD_I2C_WRITE;
-			buf[1] = (msg[i].addr << 1);
-			buf[2] = msg[i].len;
-			buf[3] = 0x01;
-			memcpy(&buf[4], msg[i].buf, msg[i].len);
-			ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
-			inc = 1;
-		}
-		if (ret)
-			break;
-
-		i += inc;
-	}
-
-	mutex_unlock(&d->i2c_mutex);
-
-	return ret ? ret : i;
-}
-
-static u32 anysee_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm anysee_i2c_algo = {
-	.master_xfer   = anysee_master_xfer,
-	.functionality = anysee_i2c_func,
-};
-
-static int anysee_mt352_demod_init(struct dvb_frontend *fe)
-{
-	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x28 };
-	static u8 reset[]          = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0x20 };
-	static u8 gpp_ctl_cfg[]    = { GPP_CTL,    0x33 };
-	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
-
-	mt352_write(fe, clock_config,   sizeof(clock_config));
-	udelay(200);
-	mt352_write(fe, reset,          sizeof(reset));
-	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
-
-	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
-	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
-	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
-
-	return 0;
-}
-
-/* Callbacks for DVB USB */
-static struct tda10023_config anysee_tda10023_config = {
-	.demod_address = (0x1a >> 1),
-	.invert = 0,
-	.xtal   = 16000000,
-	.pll_m  = 11,
-	.pll_p  = 3,
-	.pll_n  = 1,
-	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
-	.deltaf = 0xfeeb,
-};
-
-static struct mt352_config anysee_mt352_config = {
-	.demod_address = (0x1e >> 1),
-	.demod_init    = anysee_mt352_demod_init,
-};
-
-static struct zl10353_config anysee_zl10353_config = {
-	.demod_address = (0x1e >> 1),
-	.parallel_ts = 1,
-};
-
-static struct zl10353_config anysee_zl10353_tda18212_config2 = {
-	.demod_address = (0x1e >> 1),
-	.parallel_ts = 1,
-	.disable_i2c_gate_ctrl = 1,
-	.no_tuner = 1,
-	.if2 = 41500,
-};
-
-static struct zl10353_config anysee_zl10353_tda18212_config = {
-	.demod_address = (0x18 >> 1),
-	.parallel_ts = 1,
-	.disable_i2c_gate_ctrl = 1,
-	.no_tuner = 1,
-	.if2 = 41500,
-};
-
-static struct tda10023_config anysee_tda10023_tda18212_config = {
-	.demod_address = (0x1a >> 1),
-	.xtal   = 16000000,
-	.pll_m  = 12,
-	.pll_p  = 3,
-	.pll_n  = 1,
-	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B,
-	.deltaf = 0xba02,
-};
-
-static struct tda18212_config anysee_tda18212_config = {
-	.i2c_address = (0xc0 >> 1),
-	.if_dvbt_6 = 4150,
-	.if_dvbt_7 = 4150,
-	.if_dvbt_8 = 4150,
-	.if_dvbc = 5000,
-};
-
-static struct tda18212_config anysee_tda18212_config2 = {
-	.i2c_address = 0x60 /* (0xc0 >> 1) */,
-	.if_dvbt_6 = 3550,
-	.if_dvbt_7 = 3700,
-	.if_dvbt_8 = 4150,
-	.if_dvbt2_6 = 3250,
-	.if_dvbt2_7 = 4000,
-	.if_dvbt2_8 = 4000,
-	.if_dvbc = 5000,
-};
-
-static struct cx24116_config anysee_cx24116_config = {
-	.demod_address = (0xaa >> 1),
-	.mpg_clk_pos_pol = 0x00,
-	.i2c_wr_max = 48,
-};
-
-static struct stv0900_config anysee_stv0900_config = {
-	.demod_address = (0xd0 >> 1),
-	.demod_mode = 0,
-	.xtal = 8000000,
-	.clkmode = 3,
-	.diseqc_mode = 2,
-	.tun1_maddress = 0,
-	.tun1_adc = 1, /* 1 Vpp */
-	.path1_mode = 3,
-};
-
-static struct stv6110_config anysee_stv6110_config = {
-	.i2c_address = (0xc0 >> 1),
-	.mclk = 16000000,
-	.clk_div = 1,
-};
-
-static struct isl6423_config anysee_isl6423_config = {
-	.current_max = SEC_CURRENT_800m,
-	.curlim  = SEC_CURRENT_LIM_OFF,
-	.mod_extern = 1,
-	.addr = (0x10 >> 1),
-};
-
-static struct cxd2820r_config anysee_cxd2820r_config = {
-	.i2c_address = 0x6d, /* (0xda >> 1) */
-	.ts_mode = 0x38,
-};
-
-/*
- * New USB device strings: Mfr=1, Product=2, SerialNumber=0
- * Manufacturer: AMT.CO.KR
- *
- * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
- * PCB: ?
- * parts: DNOS404ZH102A(MT352, DTT7579(?))
- *
- * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
- * PCB: PCB 507T (rev1.61)
- * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
- * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
- * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
- *
- * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
- * PCB: 507CD (rev1.1)
- * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
- * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
- * IOD[0] ZL10353 1=enabled
- * IOA[7] TS 0=enabled
- * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
- *
- * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
- * PCB: 507DC (rev0.2)
- * parts: TDA10023, DTOS403IH102B TM, CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
- * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
- * IOD[0] TDA10023 1=enabled
- *
- * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
- * PCB: 507SI (rev2.1)
- * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
- * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
- * IOD[0] CX24116 1=enabled
- *
- * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
- * PCB: 507FA (rev0.4)
- * parts: TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
- * IOD[5] TDA10023 1=enabled
- * IOE[0] tuner 1=enabled
- *
- * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
- * PCB: 507FA (rev1.1)
- * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
- * DVB-C:
- * IOD[5] TDA10023 1=enabled
- * IOE[0] tuner 1=enabled
- * DVB-T:
- * IOD[0] ZL10353 1=enabled
- * IOE[0] tuner 0=enabled
- * tuner is behind ZL10353 I2C-gate
- *
- * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
- * PCB: 508TC (rev0.6)
- * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[4] TDA18212 1=enabled
- * DVB-C:
- * IOD[6] ZL10353 0=disabled
- * IOD[5] TDA10023 1=enabled
- * IOE[0] IF 1=enabled
- * DVB-T:
- * IOD[5] TDA10023 0=disabled
- * IOD[6] ZL10353 1=enabled
- * IOE[0] IF 0=enabled
- *
- * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
- * PCB: 508S2 (rev0.7)
- * parts: DNBU10512IST(STV0903, STV6110), ISL6423
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[5] STV0903 1=enabled
- *
- * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)"
- * PCB: 508T2C (rev0.3)
- * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[5] CXD2820R 1=enabled
- *
- * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
- * PCB: 508PTC (rev0.5)
- * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[4] TDA18212 1=enabled
- * DVB-C:
- * IOD[6] ZL10353 0=disabled
- * IOD[5] TDA10023 1=enabled
- * IOE[0] IF 1=enabled
- * DVB-T:
- * IOD[5] TDA10023 0=disabled
- * IOD[6] ZL10353 1=enabled
- * IOE[0] IF 0=enabled
- *
- * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
- * PCB: 508PS2 (rev0.4)
- * parts: DNBU10512IST(STV0903, STV6110), ISL6423
- * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
- * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
- * IOA[7] TS 1=enabled
- * IOE[5] STV0903 1=enabled
- */
-
-static int anysee_read_config(struct dvb_usb_device *d)
-{
-	struct anysee_state *state = d_to_priv(d);
-	int ret;
-	u8 hw_info[3];
-
-	/*
-	 * Check which hardware we have.
-	 * We must do this call two times to get reliable values (hw/fw bug).
-	 */
-	ret = anysee_get_hw_info(d, hw_info);
-	if (ret)
-		goto error;
-
-	ret = anysee_get_hw_info(d, hw_info);
-	if (ret)
-		goto error;
-
-	/* Meaning of these info bytes are guessed. */
-	info("firmware version:%d.%d hardware id:%d",
-		hw_info[1], hw_info[2], hw_info[0]);
-
-	state->hw = hw_info[0];
-error:
-	return ret;
-}
-
-/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */
-static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-	/* enable / disable tuner access on IOE[4] */
-	return anysee_wr_reg_mask(fe_to_d(fe), REG_IOE, (enable << 4), 0x10);
-}
-
-static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
-{
-	struct anysee_state *state = fe_to_priv(fe);
-	struct dvb_usb_device *d = fe_to_d(fe);
-	int ret;
-
-	deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
-
-	/* no frontend sleep control */
-	if (onoff == 0)
-		return 0;
-
-	switch (state->hw) {
-	case ANYSEE_HW_507FA: /* 15 */
-		/* E30 Combo Plus */
-		/* E30 C Plus */
-
-		if (fe->id == 0)  {
-			/* disable DVB-T demod on IOD[0] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C tuner on IOE[0] */
-			ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01);
-			if (ret)
-				goto error;
-		} else {
-			/* disable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T demod on IOD[0] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T tuner on IOE[0] */
-			ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01);
-			if (ret)
-				goto error;
-		}
-
-		break;
-	case ANYSEE_HW_508TC: /* 18 */
-	case ANYSEE_HW_508PTC: /* 21 */
-		/* E7 TC */
-		/* E7 PTC */
-
-		if (fe->id == 0)  {
-			/* disable DVB-T demod on IOD[6] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40);
-			if (ret)
-				goto error;
-
-			/* enable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
-			if (ret)
-				goto error;
-
-			/* enable IF route on IOE[0] */
-			ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01);
-			if (ret)
-				goto error;
-		} else {
-			/* disable DVB-C demod on IOD[5] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
-			if (ret)
-				goto error;
-
-			/* enable DVB-T demod on IOD[6] */
-			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40);
-			if (ret)
-				goto error;
-
-			/* enable IF route on IOE[0] */
-			ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01);
-			if (ret)
-				goto error;
-		}
-
-		break;
-	default:
-		ret = 0;
-	}
-
-error:
-	return ret;
-}
-
-static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
-{
-	struct anysee_state *state = adap_to_priv(adap);
-	struct dvb_usb_device *d = adap_to_d(adap);
-	int ret;
-	u8 tmp;
-	struct i2c_msg msg[2] = {
-		{
-			.addr = anysee_tda18212_config.i2c_address,
-			.flags = 0,
-			.len = 1,
-			.buf = "\x00",
-		}, {
-			.addr = anysee_tda18212_config.i2c_address,
-			.flags = I2C_M_RD,
-			.len = 1,
-			.buf = &tmp,
-		}
-	};
-
-	switch (state->hw) {
-	case ANYSEE_HW_507T: /* 2 */
-		/* E30 */
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(mt352_attach, &anysee_mt352_config,
-				&d->i2c_adap);
-		if (adap->fe[0])
-			break;
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config,
-				&d->i2c_adap);
-
-		break;
-	case ANYSEE_HW_507CD: /* 6 */
-		/* E30 Plus */
-
-		/* enable DVB-T demod on IOD[0] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* enable transport stream on IOA[7] */
-		ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config,
-				&d->i2c_adap);
-
-		break;
-	case ANYSEE_HW_507DC: /* 10 */
-		/* E30 C Plus */
-
-		/* enable DVB-C demod on IOD[0] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(tda10023_attach,
-				&anysee_tda10023_config, &d->i2c_adap, 0x48);
-
-		break;
-	case ANYSEE_HW_507SI: /* 11 */
-		/* E30 S2 Plus */
-
-		/* enable DVB-S/S2 demod on IOD[0] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(cx24116_attach, &anysee_cx24116_config,
-				&d->i2c_adap);
-
-		break;
-	case ANYSEE_HW_507FA: /* 15 */
-		/* E30 Combo Plus */
-		/* E30 C Plus */
-
-		/* enable tuner on IOE[4] */
-		ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 4), 0x10);
-		if (ret)
-			goto error;
-
-		/* probe TDA18212 */
-		tmp = 0;
-		ret = i2c_transfer(&d->i2c_adap, msg, 2);
-		if (ret == 2 && tmp == 0xc7)
-			deb_info("%s: TDA18212 found\n", __func__);
-		else
-			tmp = 0;
-
-		/* disable tuner on IOE[4] */
-		ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 4), 0x10);
-		if (ret)
-			goto error;
-
-		/* disable DVB-T demod on IOD[0] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* enable DVB-C demod on IOD[5] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		if (tmp == 0xc7) {
-			/* TDA18212 config */
-			adap->fe[0] = dvb_attach(tda10023_attach,
-					&anysee_tda10023_tda18212_config,
-					&d->i2c_adap, 0x48);
-
-			/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
-			if (adap->fe[0])
-				adap->fe[0]->ops.i2c_gate_ctrl =
-						anysee_i2c_gate_ctrl;
-		} else {
-			/* PLL config */
-			adap->fe[0] = dvb_attach(tda10023_attach,
-					&anysee_tda10023_config,
-					&d->i2c_adap, 0x48);
-		}
-
-		/* break out if first frontend attaching fails */
-		if (!adap->fe[0])
-			break;
-
-		/* disable DVB-C demod on IOD[5] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* enable DVB-T demod on IOD[0] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		if (tmp == 0xc7) {
-			/* TDA18212 config */
-			adap->fe[1] = dvb_attach(zl10353_attach,
-					&anysee_zl10353_tda18212_config2,
-					&d->i2c_adap);
-
-			/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
-			if (adap->fe[1])
-				adap->fe[1]->ops.i2c_gate_ctrl =
-						anysee_i2c_gate_ctrl;
-		} else {
-			/* PLL config */
-			adap->fe[1] = dvb_attach(zl10353_attach,
-					&anysee_zl10353_config,
-					&d->i2c_adap);
-		}
-
-		break;
-	case ANYSEE_HW_508TC: /* 18 */
-	case ANYSEE_HW_508PTC: /* 21 */
-		/* E7 TC */
-		/* E7 PTC */
-
-		/* disable DVB-T demod on IOD[6] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40);
-		if (ret)
-			goto error;
-
-		/* enable DVB-C demod on IOD[5] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(tda10023_attach,
-				&anysee_tda10023_tda18212_config,
-				&d->i2c_adap, 0x48);
-
-		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
-		if (adap->fe[0])
-			adap->fe[0]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
-
-		/* break out if first frontend attaching fails */
-		if (!adap->fe[0])
-			break;
-
-		/* disable DVB-C demod on IOD[5] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* enable DVB-T demod on IOD[6] */
-		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe[1] = dvb_attach(zl10353_attach,
-				&anysee_zl10353_tda18212_config,
-				&d->i2c_adap);
-
-		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
-		if (adap->fe[1])
-			adap->fe[1]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
-
-		state->has_ci = true;
-
-		break;
-	case ANYSEE_HW_508S2: /* 19 */
-	case ANYSEE_HW_508PS2: /* 22 */
-		/* E7 S2 */
-		/* E7 PS2 */
-
-		/* enable DVB-S/S2 demod on IOE[5] */
-		ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(stv0900_attach,
-				&anysee_stv0900_config, &d->i2c_adap, 0);
-
-		state->has_ci = true;
-
-		break;
-	case ANYSEE_HW_508T2C: /* 20 */
-		/* E7 T2C */
-
-		/* enable DVB-T/T2/C demod on IOE[5] */
-		ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20);
-		if (ret)
-			goto error;
-
-		/* attach demod */
-		adap->fe[0] = dvb_attach(cxd2820r_attach,
-				&anysee_cxd2820r_config, &d->i2c_adap);
-
-		state->has_ci = true;
-
-		break;
-	}
-
-	if (!adap->fe[0]) {
-		/* we have no frontend :-( */
-		ret = -ENODEV;
-		err("Unsupported Anysee version. " \
-			"Please report the <linux-media@vger.kernel.org>.");
-	}
-error:
-	return ret;
-}
-
-static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	struct anysee_state *state = adap_to_priv(adap);
-	struct dvb_usb_device *d = adap_to_d(adap);
-	struct dvb_frontend *fe;
-	int ret;
-	deb_info("%s: adap=%d\n", __func__, adap->id);
-
-	switch (state->hw) {
-	case ANYSEE_HW_507T: /* 2 */
-		/* E30 */
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), NULL,
-				DVB_PLL_THOMSON_DTT7579);
-
-		break;
-	case ANYSEE_HW_507CD: /* 6 */
-		/* E30 Plus */
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1),
-				&d->i2c_adap, DVB_PLL_THOMSON_DTT7579);
-
-		break;
-	case ANYSEE_HW_507DC: /* 10 */
-		/* E30 C Plus */
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1),
-				&d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
-
-		break;
-	case ANYSEE_HW_507SI: /* 11 */
-		/* E30 S2 Plus */
-
-		/* attach LNB controller */
-		fe = dvb_attach(isl6423_attach, adap->fe[0], &d->i2c_adap,
-				&anysee_isl6423_config);
-
-		break;
-	case ANYSEE_HW_507FA: /* 15 */
-		/* E30 Combo Plus */
-		/* E30 C Plus */
-
-		/* Try first attach TDA18212 silicon tuner on IOE[4], if that
-		 * fails attach old simple PLL. */
-
-		/* attach tuner */
-		fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap,
-				&anysee_tda18212_config);
-
-		if (fe && adap->fe[1]) {
-			/* attach tuner for 2nd FE */
-			fe = dvb_attach(tda18212_attach, adap->fe[1],
-					&d->i2c_adap, &anysee_tda18212_config);
-			break;
-		} else if (fe) {
-			break;
-		}
-
-		/* attach tuner */
-		fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1),
-				&d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
-
-		if (fe && adap->fe[1]) {
-			/* attach tuner for 2nd FE */
-			fe = dvb_attach(dvb_pll_attach, adap->fe[0],
-					(0xc0 >> 1), &d->i2c_adap,
-					DVB_PLL_SAMSUNG_DTOS403IH102A);
-		}
-
-		break;
-	case ANYSEE_HW_508TC: /* 18 */
-	case ANYSEE_HW_508PTC: /* 21 */
-		/* E7 TC */
-		/* E7 PTC */
-
-		/* attach tuner */
-		fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap,
-				&anysee_tda18212_config);
-
-		if (fe) {
-			/* attach tuner for 2nd FE */
-			fe = dvb_attach(tda18212_attach, adap->fe[1],
-					&d->i2c_adap, &anysee_tda18212_config);
-		}
-
-		break;
-	case ANYSEE_HW_508S2: /* 19 */
-	case ANYSEE_HW_508PS2: /* 22 */
-		/* E7 S2 */
-		/* E7 PS2 */
-
-		/* attach tuner */
-		fe = dvb_attach(stv6110_attach, adap->fe[0],
-				&anysee_stv6110_config, &d->i2c_adap);
-
-		if (fe) {
-			/* attach LNB controller */
-			fe = dvb_attach(isl6423_attach, adap->fe[0],
-					&d->i2c_adap, &anysee_isl6423_config);
-		}
-
-		break;
-
-	case ANYSEE_HW_508T2C: /* 20 */
-		/* E7 T2C */
-
-		/* attach tuner */
-		fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap,
-				&anysee_tda18212_config2);
-
-		break;
-	default:
-		fe = NULL;
-	}
-
-	if (fe)
-		ret = 0;
-	else
-		ret = -ENODEV;
-
-	return ret;
-}
-
-static int anysee_rc_query(struct dvb_usb_device *d)
-{
-	u8 buf[] = {CMD_GET_IR_CODE};
-	u8 ircode[2];
-	int ret;
-
-	/* Remote controller is basic NEC using address byte 0x08.
-	   Anysee device RC query returns only two bytes, status and code,
-	   address byte is dropped. Also it does not return any value for
-	   NEC RCs having address byte other than 0x08. Due to that, we
-	   cannot use that device as standard NEC receiver.
-	   It could be possible make hack which reads whole code directly
-	   from device memory... */
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode));
-	if (ret)
-		return ret;
-
-	if (ircode[0]) {
-		deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
-		rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
-	}
-
-	return 0;
-}
-
-static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
-{
-	rc->allowed_protos = RC_TYPE_NEC;
-	rc->query          = anysee_rc_query;
-	rc->interval       = 250;  /* windows driver uses 500ms */
-
-	return 0;
-}
-
-static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
-	int addr)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1};
-	u8 val;
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
-	if (ret)
-		return ret;
-
-	return val;
-}
-
-static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
-	int addr, u8 val)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val};
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot,
-	u8 addr)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1};
-	u8 val;
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
-	if (ret)
-		return ret;
-
-	return val;
-}
-
-static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot,
-	u8 addr, u8 val)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val};
-
-	ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-	struct anysee_state *state = d_to_priv(d);
-
-	state->ci_cam_ready = jiffies + msecs_to_jiffies(1000);
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	msleep(300);
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	msleep(30);
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot)
-{
-	struct dvb_usb_device *d = ci->data;
-	int ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot,
-	int open)
-{
-	struct dvb_usb_device *d = ci->data;
-	struct anysee_state *state = d_to_priv(d);
-	int ret;
-	u8 tmp;
-
-	ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40);
-	if (ret)
-		return ret;
-
-	if (tmp == 0) {
-		ret = DVB_CA_EN50221_POLL_CAM_PRESENT;
-		if (time_after(jiffies, state->ci_cam_ready))
-			ret |= DVB_CA_EN50221_POLL_CAM_READY;
-	}
-
-	return ret;
-}
-
-static int anysee_ci_init(struct dvb_usb_device *d)
-{
-	struct anysee_state *state = d_to_priv(d);
-	int ret;
-
-	state->ci.owner               = THIS_MODULE;
-	state->ci.read_attribute_mem  = anysee_ci_read_attribute_mem;
-	state->ci.write_attribute_mem = anysee_ci_write_attribute_mem;
-	state->ci.read_cam_control    = anysee_ci_read_cam_control;
-	state->ci.write_cam_control   = anysee_ci_write_cam_control;
-	state->ci.slot_reset          = anysee_ci_slot_reset;
-	state->ci.slot_shutdown       = anysee_ci_slot_shutdown;
-	state->ci.slot_ts_enable      = anysee_ci_slot_ts_enable;
-	state->ci.poll_slot_status    = anysee_ci_poll_slot_status;
-	state->ci.data                = d;
-
-	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
-	if (ret)
-		return ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07);
-	if (ret)
-		return ret;
-
-	ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07);
-	if (ret)
-		return ret;
-
-	ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static void anysee_ci_release(struct dvb_usb_device *d)
-{
-	struct anysee_state *state = d_to_priv(d);
-
-	/* detach CI */
-	if (state->has_ci)
-		dvb_ca_en50221_release(&state->ci);
-
-	return;
-}
-
-static int anysee_init(struct dvb_usb_device *d)
-{
-	struct anysee_state *state = d_to_priv(d);
-	int ret;
-
-	/* There is one interface with two alternate settings.
-	   Alternate setting 0 is for bulk transfer.
-	   Alternate setting 1 is for isochronous transfer.
-	   We use bulk transfer (alternate setting 0). */
-	ret = usb_set_interface(d->udev, 0, 0);
-	if (ret)
-		return ret;
-
-	/* LED light */
-	ret = anysee_led_ctrl(d, 0x01, 0x03);
-	if (ret)
-		return ret;
-
-	/* enable IR */
-	ret = anysee_ir_ctrl(d, 1);
-	if (ret)
-		return ret;
-
-	/* attach CI */
-	if (state->has_ci) {
-		ret = anysee_ci_init(d);
-		if (ret) {
-			state->has_ci = false;
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static void anysee_exit(struct dvb_usb_device *d)
-{
-	return anysee_ci_release(d);
-}
-
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties anysee_props = {
-	.driver_name = KBUILD_MODNAME,
-	.owner = THIS_MODULE,
-	.adapter_nr = adapter_nr,
-	.size_of_priv = sizeof(struct anysee_state),
-
-	.generic_bulk_ctrl_endpoint = 0x01,
-	.generic_bulk_ctrl_endpoint_response = 0x81,
-
-	.i2c_algo         = &anysee_i2c_algo,
-	.read_config      = anysee_read_config,
-	.frontend_attach  = anysee_frontend_attach,
-	.tuner_attach     = anysee_tuner_attach,
-	.init             = anysee_init,
-	.get_rc_config    = anysee_get_rc_config,
-	.frontend_ctrl    = anysee_frontend_ctrl,
-	.streaming_ctrl   = anysee_streaming_ctrl,
-	.exit             = anysee_exit,
-
-	.num_adapters = 1,
-	.adapter = {
-		{
-			.stream = DVB_USB_STREAM_BULK(0x82, 8, 16 * 512),
-		}
-	}
-};
-
-static const struct usb_device_id anysee_id_table[] = {
-	{ DVB_USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE,
-		&anysee_props, "Anysee", RC_MAP_ANYSEE) },
-	{ DVB_USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE,
-		&anysee_props, "Anysee", RC_MAP_ANYSEE) },
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, anysee_id_table);
-
-static struct usb_driver anysee_usb_driver = {
-	.name = KBUILD_MODNAME,
-	.id_table = anysee_id_table,
-	.probe = dvb_usbv2_probe,
-	.disconnect = dvb_usbv2_disconnect,
-	.suspend = dvb_usbv2_suspend,
-	.resume = dvb_usbv2_resume,
-	.no_dynamic_id = 1,
-	.soft_unbind = 1,
-};
-
-module_usb_driver(anysee_usb_driver);
-
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
-MODULE_LICENSE("GPL");