V4L/DVB (6655): Add support for MT352-based DViCO FusionHDTV DVB-T NANO devices

There are at least three variants of the DViCO FusionHDTV DVB-T NANO that
share the same USB device ID.  The first (ZL10353 w/ firmware in ROM) is
already supported; the latter two both require firmware and have either
an MT352 or ZL10353 demodulator, and have a different IR receiver from the
first.

This introduces a new identify_state that can tell the difference between a
"warm" device which is running the embedded firmware, and a "cold" device
that needs us to upload firmware to it before it will work.  We patch the
uploaded device ID (like we do for other bluebird devices) to make it easy
to identify the particular device variant when it reattaches.

NB: These devices use a different firmware file from previous bluebird
    devices.  You need a new firmware file to make this work.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 105 insertions, 11 deletions

diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index f6fa2c22b0bf..c44b9799efaa 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -440,6 +440,13 @@ static struct zl10353_config cxusb_zl10353_xc3028_config = {
 	.parallel_ts = 1,
 };
 
+static struct mt352_config cxusb_mt352_xc3028_config = {
+	.demod_address = 0x0f,
+	.if2 = 4560,
+	.no_tuner = 1,
+	.demod_init = cxusb_mt352_demod_init,
+};
+
 /* Callbacks for DVB USB */
 static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
 {
@@ -639,30 +646,63 @@ static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap)
 				   &adap->dev->i2c_adap)) != NULL)
 		return 0;
 
+	if ((adap->fe = dvb_attach(mt352_attach,
+				   &cxusb_mt352_xc3028_config,
+				   &adap->dev->i2c_adap)) != NULL)
+		return 0;
+
 	return -EIO;
 }
 
 /*
+ * DViCO has shipped two devices with the same USB ID, but only one of them
+ * needs a firmware download.  Check the device class details to see if they
+ * have non-default values to decide whether the device is actually cold or
+ * not, and forget a match if it turns out we selected the wrong device.
+ */
+static int bluebird_fx2_identify_state(struct usb_device *udev,
+				       struct dvb_usb_device_properties *props,
+				       struct dvb_usb_device_description **desc,
+				       int *cold)
+{
+	int wascold = *cold;
+
+	*cold = udev->descriptor.bDeviceClass == 0xff &&
+		udev->descriptor.bDeviceSubClass == 0xff &&
+		udev->descriptor.bDeviceProtocol == 0xff;
+
+	if (*cold && !wascold)
+		*desc = NULL;
+
+	return 0;
+}
+
+/*
  * DViCO bluebird firmware needs the "warm" product ID to be patched into the
  * firmware file before download.
  */
 
-#define BLUEBIRD_01_ID_OFFSET 6638
+static const int dvico_firmware_id_offsets[] = { 6638, 3204 };
 static int bluebird_patch_dvico_firmware_download(struct usb_device *udev,
 						  const struct firmware *fw)
 {
-	if (fw->size < BLUEBIRD_01_ID_OFFSET + 4)
-		return -EINVAL;
+	int pos;
+
+	for (pos = 0; pos < ARRAY_SIZE(dvico_firmware_id_offsets); pos++) {
+		int idoff = dvico_firmware_id_offsets[pos];
 
-	if (fw->data[BLUEBIRD_01_ID_OFFSET] == (USB_VID_DVICO & 0xff) &&
-	    fw->data[BLUEBIRD_01_ID_OFFSET + 1] == USB_VID_DVICO >> 8) {
+		if (fw->size < idoff + 4)
+			continue;
 
-		fw->data[BLUEBIRD_01_ID_OFFSET + 2] =
-			le16_to_cpu(udev->descriptor.idProduct) + 1;
-		fw->data[BLUEBIRD_01_ID_OFFSET + 3] =
-			le16_to_cpu(udev->descriptor.idProduct) >> 8;
+		if (fw->data[idoff] == (USB_VID_DVICO & 0xff) &&
+		    fw->data[idoff + 1] == USB_VID_DVICO >> 8) {
+			fw->data[idoff + 2] =
+				le16_to_cpu(udev->descriptor.idProduct) + 1;
+			fw->data[idoff + 3] =
+				le16_to_cpu(udev->descriptor.idProduct) >> 8;
 
-		return usb_cypress_load_firmware(udev, fw, CYPRESS_FX2);
+			return usb_cypress_load_firmware(udev, fw, CYPRESS_FX2);
+		}
 	}
 
 	return -EINVAL;
@@ -676,6 +716,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
+static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
 
 static int cxusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
@@ -686,7 +727,8 @@ static int cxusb_probe(struct usb_interface *intf,
 		dvb_usb_device_init(intf,&cxusb_bluebird_lgz201_properties,THIS_MODULE,NULL) == 0 ||
 		dvb_usb_device_init(intf,&cxusb_bluebird_dtt7579_properties,THIS_MODULE,NULL) == 0 ||
 		dvb_usb_device_init(intf,&cxusb_bluebird_dualdig4_properties,THIS_MODULE,NULL) == 0 ||
-		dvb_usb_device_init(intf,&cxusb_bluebird_nano2_properties,THIS_MODULE,NULL) == 0) {
+		dvb_usb_device_init(intf,&cxusb_bluebird_nano2_properties,THIS_MODULE,NULL) == 0 ||
+		dvb_usb_device_init(intf,&cxusb_bluebird_nano2_needsfirmware_properties,THIS_MODULE,NULL) == 0) {
 		return 0;
 	}
 
@@ -709,6 +751,7 @@ static struct usb_device_id cxusb_table [] = {
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
 	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1018,6 +1061,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 
 	.usb_ctrl         = CYPRESS_FX2,
+	.identify_state   = bluebird_fx2_identify_state,
 
 	.size_of_priv     = sizeof(struct cxusb_state),
 
@@ -1061,6 +1105,56 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
 	}
 };
 
+static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl          = DEVICE_SPECIFIC,
+	.firmware          = "dvb-usb-bluebird-02.fw",
+	.download_firmware = bluebird_patch_dvico_firmware_download,
+	.identify_state    = bluebird_fx2_identify_state,
+
+	.size_of_priv      = sizeof(struct cxusb_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = cxusb_streaming_ctrl,
+			.frontend_attach  = cxusb_nano2_frontend_attach,
+			.tuner_attach     = cxusb_dvico_xc3028_tuner_attach,
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
+		},
+	},
+
+	.power_ctrl       = cxusb_nano2_power_ctrl,
+
+	.i2c_algo         = &cxusb_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.rc_interval      = 100,
+	.rc_key_map       = dvico_portable_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(dvico_portable_rc_keys),
+	.rc_query         = cxusb_rc_query,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "DViCO FusionHDTV DVB-T NANO2 w/o firmware",
+			{ &cxusb_table[14], NULL },
+			{ &cxusb_table[15], NULL },
+		},
+	}
+};
+
 static struct usb_driver cxusb_driver = {
 	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,