[media] it913x Support it9135 Verions 2 chip

Support for version 2 type chips and other LNA versions of version 1

Scripts may be compressed slightly at a later stage.

TODO
Firmware loader
However, things are a little confusing,  it is not clear that
dvb-usb-it9137-01.fw does not work with version 2 chips
as in recent files both firmwares are the same.

Should be applied to: 8133 Support for single ITE 9135 device.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 15 insertions, 37 deletions

diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index c46226187143..a541904851f5 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -60,15 +60,6 @@ struct it913x_state {
 	u8 id;
 };
 
-struct ite_config {
-	u8 chip_ver;
-	u16 chip_type;
-	u32 firmware;
-	u8 tuner_id_0;
-	u8 tuner_id_1;
-	u8 dual_mode;
-};
-
 struct ite_config it913x_config;
 
 static int it913x_bulk_write(struct usb_device *dev,
@@ -390,8 +381,8 @@ static int it913x_identify_state(struct usb_device *udev,
 			if (ret != 0)
 				ret = it913x_wr_reg(udev, DEV_0,
 					GPIOH1_O, 0x0);
+			props->num_adapters = 2;
 		}
-		props->num_adapters = 2;
 	} else
 		props->num_adapters = 1;
 
@@ -474,12 +465,17 @@ static int it913x_download_firmware(struct usb_device *udev,
 	/* Tuner function */
 	if (it913x_config.dual_mode)
 		ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
-
-	ret |= it913x_wr_reg(udev, DEV_0,  PADODPU, 0x0);
-	ret |= it913x_wr_reg(udev, DEV_0,  AGC_O_D, 0x0);
-	if (it913x_config.dual_mode) {
-		ret |= it913x_wr_reg(udev, DEV_1,  PADODPU, 0x0);
-		ret |= it913x_wr_reg(udev, DEV_1,  AGC_O_D, 0x0);
+	else
+		ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0x68);
+
+	if ((it913x_config.chip_ver == 1) &&
+		(it913x_config.chip_type == 0x9135)) {
+		ret |= it913x_wr_reg(udev, DEV_0,  PADODPU, 0x0);
+		ret |= it913x_wr_reg(udev, DEV_0,  AGC_O_D, 0x0);
+		if (it913x_config.dual_mode) {
+			ret |= it913x_wr_reg(udev, DEV_1,  PADODPU, 0x0);
+			ret |= it913x_wr_reg(udev, DEV_1,  AGC_O_D, 0x0);
+		}
 	}
 
 	return (ret < 0) ? -ENODEV : 0;
@@ -501,31 +497,13 @@ static int it913x_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	struct usb_device *udev = adap->dev->udev;
 	int ret = 0;
-	u8 adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
 	u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5);
 	u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize;
-	u8 tuner_id, tuner_type;
 
-	if (adap->id == 0)
-		tuner_id = it913x_config.tuner_id_0;
-	else
-		tuner_id = it913x_config.tuner_id_1;
-
-	/* TODO we always use IT9137 possible references here*/
-	/* Documentation suggests don't care */
-	switch (tuner_id) {
-	case 0x51:
-	case 0x52:
-	case 0x60:
-	case 0x61:
-	case 0x62:
-	default:
-	case 0x38:
-		tuner_type = IT9137;
-	}
+	it913x_config.adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
 
 	adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach,
-		&adap->dev->i2c_adap, adap_addr, adf, tuner_type);
+		&adap->dev->i2c_adap, adap_addr, &it913x_config);
 
 	if (adap->id == 0 && adap->fe_adap[0].fe) {
 		ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1);
@@ -698,5 +676,5 @@ module_exit(it913x_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.07");
+MODULE_VERSION("1.08");
 MODULE_LICENSE("GPL");