[media] dvb-usb: move it to drivers/media/usb/dvb-usb

As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 583 deletions

diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
deleted file mode 100644
index c8a95042dfbc..000000000000
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ /dev/null
@@ -1,583 +0,0 @@
-/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
-*
-* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
-* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
-*
-*	This program is free software; you can redistribute it and/or modify it
-*	under the terms of the GNU General Public License as published by the Free
-*	Software Foundation, version 2.
-*
-* see Documentation/dvb/README.dvb-usb for more information
-*/
-
-#define DVB_USB_LOG_PREFIX "opera"
-
-#include "dvb-usb.h"
-#include "stv0299.h"
-
-#define OPERA_READ_MSG 0
-#define OPERA_WRITE_MSG 1
-#define OPERA_I2C_TUNER 0xd1
-
-#define READ_FX2_REG_REQ  0xba
-#define READ_MAC_ADDR 0x08
-#define OPERA_WRITE_FX2 0xbb
-#define OPERA_TUNER_REQ 0xb1
-#define REG_1F_SYMBOLRATE_BYTE0 0x1f
-#define REG_20_SYMBOLRATE_BYTE1 0x20
-#define REG_21_SYMBOLRATE_BYTE2 0x21
-
-#define ADDR_B600_VOLTAGE_13V (0x02)
-#define ADDR_B601_VOLTAGE_18V (0x03)
-#define ADDR_B1A6_STREAM_CTRL (0x04)
-#define ADDR_B880_READ_REMOTE (0x05)
-
-struct opera1_state {
-	u32 last_key_pressed;
-};
-struct rc_map_opera_table {
-	u32 keycode;
-	u32 event;
-};
-
-static int dvb_usb_opera1_debug;
-module_param_named(debug, dvb_usb_opera1_debug, int, 0644);
-MODULE_PARM_DESC(debug,
-		 "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."
-		 DVB_USB_DEBUG_STATUS);
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-
-static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,
-			    u8 * data, u16 len, int flags)
-{
-	int ret;
-	u8 tmp;
-	u8 *buf;
-	unsigned int pipe = (flags == OPERA_READ_MSG) ?
-		usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);
-	u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
-
-	buf = kmalloc(len, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	if (flags == OPERA_WRITE_MSG)
-		memcpy(buf, data, len);
-	ret = usb_control_msg(dev, pipe, request,
-			request_type | USB_TYPE_VENDOR, value, 0x0,
-			buf, len, 2000);
-
-	if (request == OPERA_TUNER_REQ) {
-		tmp = buf[0];
-		if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-			    OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,
-			    0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) {
-			ret = 0;
-			goto out;
-		}
-		buf[0] = tmp;
-	}
-	if (flags == OPERA_READ_MSG)
-		memcpy(data, buf, len);
-out:
-	kfree(buf);
-	return ret;
-}
-
-/* I2C */
-
-static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,
-				  u8 * buf, u16 len)
-{
-	int ret = 0;
-	u8 request;
-	u16 value;
-
-	if (!dev) {
-		info("no usb_device");
-		return -EINVAL;
-	}
-	if (mutex_lock_interruptible(&dev->usb_mutex) < 0)
-		return -EAGAIN;
-
-	switch (addr>>1){
-		case ADDR_B600_VOLTAGE_13V:
-			request=0xb6;
-			value=0x00;
-			break;
-		case ADDR_B601_VOLTAGE_18V:
-			request=0xb6;
-			value=0x01;
-			break;
-		case ADDR_B1A6_STREAM_CTRL:
-			request=0xb1;
-			value=0xa6;
-			break;
-		case ADDR_B880_READ_REMOTE:
-			request=0xb8;
-			value=0x80;
-			break;
-		default:
-			request=0xb1;
-			value=addr;
-	}
-	ret = opera1_xilinx_rw(dev->udev, request,
-		value, buf, len,
-		addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);
-
-	mutex_unlock(&dev->usb_mutex);
-	return ret;
-}
-
-static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
-			   int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	int i = 0, tmp = 0;
-
-	if (!d)
-		return -ENODEV;
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EAGAIN;
-
-	for (i = 0; i < num; i++) {
-		if ((tmp = opera1_usb_i2c_msgxfer(d,
-					(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
-					msg[i].buf,
-					msg[i].len
-					)) != msg[i].len) {
-			break;
-		}
-		if (dvb_usb_opera1_debug & 0x10)
-			info("sending i2c mesage %d %d", tmp, msg[i].len);
-	}
-	mutex_unlock(&d->i2c_mutex);
-	return num;
-}
-
-static u32 opera1_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm opera1_i2c_algo = {
-	.master_xfer = opera1_i2c_xfer,
-	.functionality = opera1_i2c_func,
-};
-
-static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	static u8 command_13v[1]={0x00};
-	static u8 command_18v[1]={0x01};
-	struct i2c_msg msg[] = {
-		{.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},
-	};
-	struct dvb_usb_adapter *udev_adap =
-	    (struct dvb_usb_adapter *)(fe->dvb->priv);
-	if (voltage == SEC_VOLTAGE_18) {
-		msg[0].addr = ADDR_B601_VOLTAGE_18V;
-		msg[0].buf = command_18v;
-	}
-	i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
-	return 0;
-}
-
-static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,
-					  u32 ratio)
-{
-	stv0299_writereg(fe, 0x13, 0x98);
-	stv0299_writereg(fe, 0x14, 0x95);
-	stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);
-	stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);
-	stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);
-	return 0;
-
-}
-static u8 opera1_inittab[] = {
-	0x00, 0xa1,
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,
-	0x05, 0x05,
-	0x06, 0x02,
-	0x07, 0x00,
-	0x0b, 0x00,
-	0x0c, 0x01,
-	0x0d, 0x81,
-	0x0e, 0x44,
-	0x0f, 0x19,
-	0x10, 0x3f,
-	0x11, 0x84,
-	0x12, 0xda,
-	0x13, 0x98,
-	0x14, 0x95,
-	0x15, 0xc9,
-	0x16, 0xeb,
-	0x17, 0x00,
-	0x18, 0x19,
-	0x19, 0x8b,
-	0x1a, 0x00,
-	0x1b, 0x82,
-	0x1c, 0x7f,
-	0x1d, 0x00,
-	0x1e, 0x00,
-	REG_1F_SYMBOLRATE_BYTE0, 0x06,
-	REG_20_SYMBOLRATE_BYTE1, 0x50,
-	REG_21_SYMBOLRATE_BYTE2, 0x10,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x24, 0x37,
-	0x25, 0xbc,
-	0x26, 0x00,
-	0x27, 0x00,
-	0x28, 0x00,
-	0x29, 0x1e,
-	0x2a, 0x14,
-	0x2b, 0x1f,
-	0x2c, 0x09,
-	0x2d, 0x0a,
-	0x2e, 0x00,
-	0x2f, 0x00,
-	0x30, 0x00,
-	0x31, 0x1f,
-	0x32, 0x19,
-	0x33, 0xfc,
-	0x34, 0x13,
-	0xff, 0xff,
-};
-
-static struct stv0299_config opera1_stv0299_config = {
-	.demod_address = 0xd0>>1,
-	.min_delay_ms = 100,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_0,
-	.volt13_op0_op1 = STV0299_VOLT13_OP0,
-	.inittab = opera1_inittab,
-	.set_symbol_rate = opera1_stv0299_set_symbol_rate,
-};
-
-static int opera1_frontend_attach(struct dvb_usb_adapter *d)
-{
-	d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config,
-				      &d->dev->i2c_adap);
-	if ((d->fe_adap[0].fe) != NULL) {
-		d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage;
-		return 0;
-	}
-	info("not attached stv0299");
-	return -EIO;
-}
-
-static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(
-		dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1,
-		&adap->dev->i2c_adap, DVB_PLL_OPERA1
-	);
-	return 0;
-}
-
-static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
-{
-	u8 val = onoff ? 0x01 : 0x00;
-
-	if (dvb_usb_opera1_debug)
-		info("power %s", onoff ? "on" : "off");
-	return opera1_xilinx_rw(d->udev, 0xb7, val,
-				&val, 1, OPERA_WRITE_MSG);
-}
-
-static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	static u8 buf_start[2] = { 0xff, 0x03 };
-	static u8 buf_stop[2] = { 0xff, 0x00 };
-	struct i2c_msg start_tuner[] = {
-		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},
-	};
-	if (dvb_usb_opera1_debug)
-		info("streaming %s", onoff ? "on" : "off");
-	i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);
-	return 0;
-}
-
-static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
-			     int onoff)
-{
-	u8 b_pid[3];
-	struct i2c_msg msg[] = {
-		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
-	};
-	if (dvb_usb_opera1_debug)
-		info("pidfilter index: %d pid: %d %s", index, pid,
-			onoff ? "on" : "off");
-	b_pid[0] = (2 * index) + 4;
-	b_pid[1] = onoff ? (pid & 0xff) : (0x00);
-	b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);
-	i2c_transfer(&adap->dev->i2c_adap, msg, 1);
-	return 0;
-}
-
-static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
-{
-	int u = 0x04;
-	u8 b_pid[3];
-	struct i2c_msg msg[] = {
-		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
-	};
-	if (dvb_usb_opera1_debug)
-		info("%s hw-pidfilter", onoff ? "enable" : "disable");
-	for (; u < 0x7e; u += 2) {
-		b_pid[0] = u;
-		b_pid[1] = 0;
-		b_pid[2] = 0x80;
-		i2c_transfer(&adap->dev->i2c_adap, msg, 1);
-	}
-	return 0;
-}
-
-static struct rc_map_table rc_map_opera1_table[] = {
-	{0x5fa0, KEY_1},
-	{0x51af, KEY_2},
-	{0x5da2, KEY_3},
-	{0x41be, KEY_4},
-	{0x0bf5, KEY_5},
-	{0x43bd, KEY_6},
-	{0x47b8, KEY_7},
-	{0x49b6, KEY_8},
-	{0x05fa, KEY_9},
-	{0x45ba, KEY_0},
-	{0x09f6, KEY_CHANNELUP},	/*chanup */
-	{0x1be5, KEY_CHANNELDOWN},	/*chandown */
-	{0x5da3, KEY_VOLUMEDOWN},	/*voldown */
-	{0x5fa1, KEY_VOLUMEUP},		/*volup */
-	{0x07f8, KEY_SPACE},		/*tab */
-	{0x1fe1, KEY_OK},		/*play ok */
-	{0x1be4, KEY_ZOOM},		/*zoom */
-	{0x59a6, KEY_MUTE},		/*mute */
-	{0x5ba5, KEY_RADIO},		/*tv/f */
-	{0x19e7, KEY_RECORD},		/*rec */
-	{0x01fe, KEY_STOP},		/*Stop */
-	{0x03fd, KEY_PAUSE},		/*pause */
-	{0x03fc, KEY_SCREEN},		/*<- -> */
-	{0x07f9, KEY_CAMERA},		/*capture */
-	{0x47b9, KEY_ESC},		/*exit */
-	{0x43bc, KEY_POWER2},		/*power */
-};
-
-static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
-{
-	struct opera1_state *opst = dev->priv;
-	u8 rcbuffer[32];
-	const u16 startmarker1 = 0x10ed;
-	const u16 startmarker2 = 0x11ec;
-	struct i2c_msg read_remote[] = {
-		{.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},
-	};
-	int i = 0;
-	u32 send_key = 0;
-
-	if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {
-		for (i = 0; i < 32; i++) {
-			if (rcbuffer[i])
-				send_key |= 1;
-			if (i < 31)
-				send_key = send_key << 1;
-		}
-		if (send_key & 0x8000)
-			send_key = (send_key << 1) | (send_key >> 15 & 0x01);
-
-		if (send_key == 0xffff && opst->last_key_pressed != 0) {
-			*state = REMOTE_KEY_REPEAT;
-			*event = opst->last_key_pressed;
-			return 0;
-		}
-		for (; send_key != 0;) {
-			if (send_key >> 16 == startmarker2) {
-				break;
-			} else if (send_key >> 16 == startmarker1) {
-				send_key =
-					(send_key & 0xfffeffff) | (startmarker1 << 16);
-				break;
-			} else
-				send_key >>= 1;
-		}
-
-		if (send_key == 0)
-			return 0;
-
-		send_key = (send_key & 0xffff) | 0x0100;
-
-		for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
-			if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
-				*state = REMOTE_KEY_PRESSED;
-				*event = rc_map_opera1_table[i].keycode;
-				opst->last_key_pressed =
-					rc_map_opera1_table[i].keycode;
-				break;
-			}
-			opst->last_key_pressed = 0;
-		}
-	} else
-		*state = REMOTE_NO_KEY_PRESSED;
-	return 0;
-}
-
-static struct usb_device_id opera1_table[] = {
-	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)},
-	{USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, opera1_table);
-
-static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
-{
-	u8 command[] = { READ_MAC_ADDR };
-	opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);
-	opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);
-	return 0;
-}
-static int opera1_xilinx_load_firmware(struct usb_device *dev,
-				       const char *filename)
-{
-	const struct firmware *fw = NULL;
-	u8 *b, *p;
-	int ret = 0, i,fpgasize=40;
-	u8 testval;
-	info("start downloading fpga firmware %s",filename);
-
-	if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
-		err("did not find the firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details on firmware-problems.",
-			filename);
-		return ret;
-	} else {
-		p = kmalloc(fw->size, GFP_KERNEL);
-		opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);
-		if (p != NULL && testval != 0x67) {
-
-			u8 reset = 0, fpga_command = 0;
-			memcpy(p, fw->data, fw->size);
-			/* clear fpga ? */
-			opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
-					 OPERA_WRITE_MSG);
-			for (i = 0; i < fw->size;) {
-				if ( (fw->size - i) <fpgasize){
-				    fpgasize=fw->size-i;
-				}
-				b = (u8 *) p + i;
-				if (opera1_xilinx_rw
-					(dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,
-						OPERA_WRITE_MSG) != fpgasize
-					) {
-					err("error while transferring firmware");
-					ret = -EINVAL;
-					break;
-				}
-				i = i + fpgasize;
-			}
-			/* restart the CPU */
-			if (ret || opera1_xilinx_rw
-					(dev, 0xa0, 0xe600, &reset, 1,
-					OPERA_WRITE_MSG) != 1) {
-				err("could not restart the USB controller CPU.");
-				ret = -EINVAL;
-			}
-		}
-	}
-	kfree(p);
-	release_firmware(fw);
-	return ret;
-}
-
-static struct dvb_usb_device_properties opera1_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
-	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-opera-01.fw",
-	.size_of_priv = sizeof(struct opera1_state),
-
-	.power_ctrl = opera1_power_ctrl,
-	.i2c_algo = &opera1_i2c_algo,
-
-	.rc.legacy = {
-		.rc_map_table = rc_map_opera1_table,
-		.rc_map_size = ARRAY_SIZE(rc_map_opera1_table),
-		.rc_interval = 200,
-		.rc_query = opera1_rc_query,
-	},
-	.read_mac_address = opera1_read_mac_address,
-	.generic_bulk_ctrl_endpoint = 0x00,
-	/* parameter for the MPEG2-data transfer */
-	.num_adapters = 1,
-	.adapter = {
-		{
-		.num_frontends = 1,
-		.fe = {{
-			.frontend_attach = opera1_frontend_attach,
-			.streaming_ctrl = opera1_streaming_ctrl,
-			.tuner_attach = opera1_tuner_attach,
-			.caps =
-				DVB_USB_ADAP_HAS_PID_FILTER |
-				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-			.pid_filter = opera1_pid_filter,
-			.pid_filter_ctrl = opera1_pid_filter_control,
-			.pid_filter_count = 252,
-			.stream = {
-				.type = USB_BULK,
-				.count = 10,
-				.endpoint = 0x82,
-				.u = {
-					.bulk = {
-						.buffersize = 4096,
-					}
-				}
-			},
-		}},
-		}
-	},
-	.num_device_descs = 1,
-	.devices = {
-		{"Opera1 DVB-S USB2.0",
-			{&opera1_table[0], NULL},
-			{&opera1_table[1], NULL},
-		},
-	}
-};
-
-static int opera1_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-
-	if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM &&
-		udev->descriptor.idVendor == USB_VID_OPERA1 &&
-		opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0
-	    ) {
-		return -EINVAL;
-	}
-
-	if (0 != dvb_usb_device_init(intf, &opera1_properties,
-				     THIS_MODULE, NULL, adapter_nr))
-		return -EINVAL;
-	return 0;
-}
-
-static struct usb_driver opera1_driver = {
-	.name = "opera1",
-	.probe = opera1_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table = opera1_table,
-};
-
-module_usb_driver(opera1_driver);
-
-MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");
-MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");
-MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");