Merge branch 'next' into for-linus

9 files changed, 951 insertions, 397 deletions

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 2dee1bf73577..1b249897c9fb 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -265,9 +265,13 @@ config DVB_USB_DW2102
 	select DVB_TDA10021 if !DVB_FE_CUSTOMISE
 	select DVB_MT312 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10039 if !DVB_FE_CUSTOMISE
+	select DVB_DS3000 if !DVB_FE_CUSTOMISE
+	select DVB_STB6100 if !DVB_FE_CUSTOMISE
+	select DVB_STV6110 if !DVB_FE_CUSTOMISE
+	select DVB_STV0900 if !DVB_FE_CUSTOMISE
 	help
-	  Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
-	  and the TeVii S650, S630.
+	  Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0
+	  receivers.
 
 config DVB_USB_CINERGY_T2
 	tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 8b544fe79b0d..495a90577c5f 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -20,20 +20,22 @@ extern int dvb_usb_dib0700_debug;
 #define deb_fwdata(args...) dprintk(dvb_usb_dib0700_debug,0x04,args)
 #define deb_data(args...)   dprintk(dvb_usb_dib0700_debug,0x08,args)
 
-#define REQUEST_I2C_READ     0x2
-#define REQUEST_I2C_WRITE    0x3
-#define REQUEST_POLL_RC      0x4 /* deprecated in firmware v1.20 */
-#define REQUEST_JUMPRAM      0x8
-#define REQUEST_SET_CLOCK    0xB
-#define REQUEST_SET_GPIO     0xC
-#define REQUEST_ENABLE_VIDEO 0xF
+#define REQUEST_SET_USB_XFER_LEN    0x0 /* valid only for firmware version */
+					/* higher than 1.21 */
+#define REQUEST_I2C_READ            0x2
+#define REQUEST_I2C_WRITE           0x3
+#define REQUEST_POLL_RC             0x4 /* deprecated in firmware v1.20 */
+#define REQUEST_JUMPRAM             0x8
+#define REQUEST_SET_CLOCK           0xB
+#define REQUEST_SET_GPIO            0xC
+#define REQUEST_ENABLE_VIDEO        0xF
 	// 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
 	// 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
 	// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           )
-#define REQUEST_SET_RC       0x11
-#define REQUEST_NEW_I2C_READ 0x12
-#define REQUEST_NEW_I2C_WRITE 0x13
-#define REQUEST_GET_VERSION  0x15
+#define REQUEST_SET_RC              0x11
+#define REQUEST_NEW_I2C_READ        0x12
+#define REQUEST_NEW_I2C_WRITE       0x13
+#define REQUEST_GET_VERSION         0x15
 
 struct dib0700_state {
 	u8 channel_state;
@@ -44,6 +46,8 @@ struct dib0700_state {
 	u8 is_dib7000pc;
 	u8 fw_use_new_i2c_api;
 	u8 disable_streaming_master_mode;
+    u32 fw_version;
+    u32 nb_packet_buffer_size;
 };
 
 extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index db7f7f79a66c..0d3c9a9a33be 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -17,6 +17,14 @@ int dvb_usb_dib0700_ir_proto = 1;
 module_param(dvb_usb_dib0700_ir_proto, int, 0644);
 MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6).");
 
+static int nb_packet_buffer_size = 21;
+module_param(nb_packet_buffer_size, int, 0644);
+MODULE_PARM_DESC(nb_packet_buffer_size,
+	"Set the dib0700 driver data buffer size. This parameter "
+	"corresponds to the number of TS packets. The actual size of "
+	"the data buffer corresponds to this parameter "
+	"multiplied by 188 (default: 21)");
+
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 
@@ -28,10 +36,14 @@ int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
 				  REQUEST_GET_VERSION,
 				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 				  b, sizeof(b), USB_CTRL_GET_TIMEOUT);
-	*hwversion  = (b[0] << 24)  | (b[1] << 16)  | (b[2] << 8)  | b[3];
-	*romversion = (b[4] << 24)  | (b[5] << 16)  | (b[6] << 8)  | b[7];
-	*ramversion = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
-	*fwtype     = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+	if (hwversion != NULL)
+		*hwversion  = (b[0] << 24)  | (b[1] << 16)  | (b[2] << 8)  | b[3];
+	if (romversion != NULL)
+		*romversion = (b[4] << 24)  | (b[5] << 16)  | (b[6] << 8)  | b[7];
+	if (ramversion != NULL)
+		*ramversion = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
+	if (fwtype != NULL)
+		*fwtype     = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
 	return ret;
 }
 
@@ -97,6 +109,27 @@ int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_
 	return dib0700_ctrl_wr(d,buf,3);
 }
 
+static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
+{
+    struct dib0700_state *st = d->priv;
+    u8 b[3];
+    int ret;
+
+    if (st->fw_version >= 0x10201) {
+	b[0] = REQUEST_SET_USB_XFER_LEN;
+	b[1] = (nb_ts_packets >> 8)&0xff;
+	b[2] = nb_ts_packets & 0xff;
+
+	deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
+
+	ret = dib0700_ctrl_wr(d, b, 3);
+    } else {
+	deb_info("this firmware does not allow to change the USB xfer len\n");
+	ret = -EIO;
+    }
+    return ret;
+}
+
 /*
  * I2C master xfer function (supported in 1.20 firmware)
  */
@@ -328,7 +361,9 @@ static int dib0700_jumpram(struct usb_device *udev, u32 address)
 int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw)
 {
 	struct hexline hx;
-	int pos = 0, ret, act_len;
+	int pos = 0, ret, act_len, i, adap_num;
+	u8 b[16];
+	u32 fw_version;
 
 	u8 buf[260];
 
@@ -364,6 +399,34 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
 	} else
 		ret = -EIO;
 
+	/* the number of ts packet has to be at least 1 */
+	if (nb_packet_buffer_size < 1)
+		nb_packet_buffer_size = 1;
+
+	/* get the fimware version */
+	usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+				  REQUEST_GET_VERSION,
+				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+				  b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+	fw_version = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
+
+	/* set the buffer size - DVB-USB is allocating URB buffers
+	 * only after the firwmare download was successful */
+	for (i = 0; i < dib0700_device_count; i++) {
+		for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
+				adap_num++) {
+			if (fw_version >= 0x10201)
+				dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
+			else {
+				/* for fw version older than 1.20.1,
+				 * the buffersize has to be n times 512 */
+				dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
+				if (dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize < 512)
+					dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 512;
+			}
+		}
+	}
+
 	return ret;
 }
 
@@ -371,6 +434,18 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
 	struct dib0700_state *st = adap->dev->priv;
 	u8 b[4];
+	int ret;
+
+	if ((onoff != 0) && (st->fw_version >= 0x10201)) {
+		/* for firmware later than 1.20.1,
+		 * the USB xfer length can be set  */
+		ret = dib0700_set_usb_xfer_len(adap->dev,
+			st->nb_packet_buffer_size);
+		if (ret < 0) {
+			deb_info("can not set the USB xfer len\n");
+			return ret;
+		}
+	}
 
 	b[0] = REQUEST_ENABLE_VIDEO;
 	b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */
@@ -415,9 +490,21 @@ static int dib0700_probe(struct usb_interface *intf,
 
 	for (i = 0; i < dib0700_device_count; i++)
 		if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE,
-					&dev, adapter_nr) == 0)
-		{
+		    &dev, adapter_nr) == 0) {
+			struct dib0700_state *st = dev->priv;
+			u32 hwversion, romversion, fw_version, fwtype;
+
+			dib0700_get_version(dev, &hwversion, &romversion,
+				&fw_version, &fwtype);
+
+			deb_info("Firmware version: %x, %d, 0x%x, %d\n",
+				hwversion, romversion, fw_version, fwtype);
+
+			st->fw_version = fw_version;
+			st->nb_packet_buffer_size = (u32)nb_packet_buffer_size;
+
 			dib0700_rc_setup(dev);
+
 			return 0;
 		}
 
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 684146f98eb7..44972d01bbd0 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -18,6 +18,7 @@
 #include "xc5000.h"
 #include "s5h1411.h"
 #include "dib0070.h"
+#include "dib0090.h"
 #include "lgdt3305.h"
 #include "mxl5007t.h"
 
@@ -130,93 +131,95 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
 /* MT226x */
 static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
 	{
-		BAND_UHF, // band_caps
+		BAND_UHF,
 
 		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
 		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
-
-		1130,  // inv_gain
-		21,  // time_stabiliz
-
-		0,  // alpha_level
-		118,  // thlock
-
-		0,     // wbd_inv
-		3530,  // wbd_ref
-		1,     // wbd_sel
-		0,     // wbd_alpha
-
-		65535,  // agc1_max
-		33770,  // agc1_min
-		65535,  // agc2_max
-		23592,  // agc2_min
-
-		0,    // agc1_pt1
-		62,   // agc1_pt2
-		255,  // agc1_pt3
-		64,   // agc1_slope1
-		64,   // agc1_slope2
-		132,  // agc2_pt1
-		192,  // agc2_pt2
-		80,   // agc2_slope1
-		80,   // agc2_slope2
-
-		17,  // alpha_mant
-		27,  // alpha_exp
-		23,  // beta_mant
-		51,  // beta_exp
-
-		1,  // perform_agc_softsplit
+		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+	    | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+		1130,
+		21,
+
+		0,
+		118,
+
+		0,
+		3530,
+		1,
+		0,
+
+		65535,
+		33770,
+		65535,
+		23592,
+
+		0,
+		62,
+		255,
+		64,
+		64,
+		132,
+		192,
+		80,
+		80,
+
+		17,
+		27,
+		23,
+		51,
+
+		1,
 	}, {
-		BAND_VHF | BAND_LBAND, // band_caps
+		BAND_VHF | BAND_LBAND,
 
 		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
 		* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
-
-		2372, // inv_gain
-		21,   // time_stabiliz
-
-		0,    // alpha_level
-		118,  // thlock
-
-		0,    // wbd_inv
-		3530, // wbd_ref
-		1,     // wbd_sel
-		0,    // wbd_alpha
-
-		65535, // agc1_max
-		0,     // agc1_min
-		65535, // agc2_max
-		23592, // agc2_min
-
-		0,    // agc1_pt1
-		128,  // agc1_pt2
-		128,  // agc1_pt3
-		128,  // agc1_slope1
-		0,    // agc1_slope2
-		128,  // agc2_pt1
-		253,  // agc2_pt2
-		81,   // agc2_slope1
-		0,    // agc2_slope2
-
-		17,  // alpha_mant
-		27,  // alpha_exp
-		23,  // beta_mant
-		51,  // beta_exp
-
-		1,  // perform_agc_softsplit
+		(0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
+	    | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+		2372,
+		21,
+
+		0,
+		118,
+
+		0,
+		3530,
+		1,
+		0,
+
+		65535,
+		0,
+		65535,
+		23592,
+
+		0,
+		128,
+		128,
+		128,
+		0,
+		128,
+		253,
+		81,
+		0,
+
+		17,
+		27,
+		23,
+		51,
+
+		1,
 	}
 };
 
 static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
-	60000, 30000, // internal, sampling
-	1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
-	0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
-	(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
-	0, // ifreq
-	20452225, // timf
+	60000, 30000,
+	1, 8, 3, 1, 0,
+	0, 0, 1, 1, 2,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	0,
+	20452225,
 };
 
 static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
@@ -605,17 +608,17 @@ static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
 		}
 		break;
 	default:
-		if (actlen != sizeof(buf)) {
-			/* We didn't get back the 6 byte message we expected */
-			err("Unexpected RC response size [%d]", actlen);
-			return -1;
-		}
+	if (actlen != sizeof(buf)) {
+		/* We didn't get back the 6 byte message we expected */
+		err("Unexpected RC response size [%d]", actlen);
+		return -1;
+	}
 
-		poll_reply.report_id  = buf[0];
-		poll_reply.data_state = buf[1];
+	poll_reply.report_id  = buf[0];
+	poll_reply.data_state = buf[1];
 		poll_reply.system     = (buf[2] << 8) | buf[3];
-		poll_reply.data       = buf[4];
-		poll_reply.not_data   = buf[5];
+	poll_reply.data       = buf[4];
+	poll_reply.not_data   = buf[5];
 
 		break;
 	}
@@ -632,7 +635,7 @@ static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
 	/* Find the key in the map */
 	for (i = 0; i < d->props.rc_key_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
-		    rc5_data(&keymap[i]) == poll_reply.data) {
+			rc5_data(&keymap[i]) == poll_reply.data) {
 			*event = keymap[i].event;
 			found = 1;
 			break;
@@ -641,8 +644,8 @@ static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
 
 	if (found == 0) {
 		err("Unknown remote controller key: %04x %02x %02x",
-		    poll_reply.system,
-		    poll_reply.data, poll_reply.not_data);
+			poll_reply.system,
+			poll_reply.data, poll_reply.not_data);
 		d->last_event = 0;
 		return 0;
 	}
@@ -933,47 +936,48 @@ static struct dvb_usb_rc_key dib0700_rc_keys[] = {
 
 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
-	BAND_UHF | BAND_VHF,       // band_caps
+	BAND_UHF | BAND_VHF,
 
 	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
 	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
-
-	712,  // inv_gain
-	41,  // time_stabiliz
-
-	0,  // alpha_level
-	118,  // thlock
-
-	0,     // wbd_inv
-	4095,  // wbd_ref
-	0,     // wbd_sel
-	0,     // wbd_alpha
-
-	42598,  // agc1_max
-	17694,  // agc1_min
-	45875,  // agc2_max
-	2621,  // agc2_min
-	0,  // agc1_pt1
-	76,  // agc1_pt2
-	139,  // agc1_pt3
-	52,  // agc1_slope1
-	59,  // agc1_slope2
-	107,  // agc2_pt1
-	172,  // agc2_pt2
-	57,  // agc2_slope1
-	70,  // agc2_slope2
-
-	21,  // alpha_mant
-	25,  // alpha_exp
-	28,  // beta_mant
-	48,  // beta_exp
-
-	1,  // perform_agc_softsplit
-	{  0,     // split_min
-	   107,   // split_max
-	   51800, // global_split_min
-	   24700  // global_split_max
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
+
+	712,
+	41,
+
+	0,
+	118,
+
+	0,
+	4095,
+	0,
+	0,
+
+	42598,
+	17694,
+	45875,
+	2621,
+	0,
+	76,
+	139,
+	52,
+	59,
+	107,
+	172,
+	57,
+	70,
+
+	21,
+	25,
+	28,
+	48,
+
+	1,
+	{  0,
+	   107,
+	   51800,
+	   24700
 	},
 };
 
@@ -982,54 +986,55 @@ static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
 
 	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
 	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
 
-	712, // inv_gain
-	41,  // time_stabiliz
+	712,
+	41,
 
-	0,   // alpha_level
-	118, // thlock
+	0,
+	118,
 
-	0,    // wbd_inv
-	4095, // wbd_ref
-	0,    // wbd_sel
-	0,    // wbd_alpha
+	0,
+	4095,
+	0,
+	0,
 
-	42598, // agc1_max
-	16384, // agc1_min
-	42598, // agc2_max
-	    0, // agc2_min
+	42598,
+	16384,
+	42598,
+	    0,
 
-	  0,   // agc1_pt1
-	137,   // agc1_pt2
-	255,   // agc1_pt3
+	  0,
+	137,
+	255,
 
-	  0,   // agc1_slope1
-	255,   // agc1_slope2
+	  0,
+	255,
 
-	0,     // agc2_pt1
-	0,     // agc2_pt2
+	0,
+	0,
 
-	 0,    // agc2_slope1
-	41,    // agc2_slope2
+	 0,
+	41,
 
-	15, // alpha_mant
-	25, // alpha_exp
+	15,
+	25,
 
-	28, // beta_mant
-	48, // beta_exp
+	28,
+	48,
 
-	0, // perform_agc_softsplit
+	0,
 };
 
 static struct dibx000_bandwidth_config stk7700p_pll_config = {
-	60000, 30000, // internal, sampling
-	1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
-	0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
-	(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
-	60258167, // ifreq
-	20452225, // timf
-	30000000, // xtal
+	60000, 30000,
+	1, 8, 3, 1, 0,
+	0, 0, 1, 1, 0,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	60258167,
+	20452225,
+	30000000,
 };
 
 static struct dib7000m_config stk7700p_dib7000m_config = {
@@ -1115,41 +1120,42 @@ static struct dibx000_agc_config dib7070_agc_config = {
 	BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
 	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
 	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
-	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
-
-	600, // inv_gain
-	10,  // time_stabiliz
-
-	0,  // alpha_level
-	118,  // thlock
-
-	0,     // wbd_inv
-	3530,  // wbd_ref
-	1,     // wbd_sel
-	5,     // wbd_alpha
-
-	65535,  // agc1_max
-		0,  // agc1_min
-
-	65535,  // agc2_max
-	0,      // agc2_min
-
-	0,      // agc1_pt1
-	40,     // agc1_pt2
-	183,    // agc1_pt3
-	206,    // agc1_slope1
-	255,    // agc1_slope2
-	72,     // agc2_pt1
-	152,    // agc2_pt2
-	88,     // agc2_slope1
-	90,     // agc2_slope2
-
-	17,  // alpha_mant
-	27,  // alpha_exp
-	23,  // beta_mant
-	51,  // beta_exp
-
-	0,  // perform_agc_softsplit
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	600,
+	10,
+
+	0,
+	118,
+
+	0,
+	3530,
+	1,
+	5,
+
+	65535,
+		0,
+
+	65535,
+	0,
+
+	0,
+	40,
+	183,
+	206,
+	255,
+	72,
+	152,
+	88,
+	90,
+
+	17,
+	27,
+	23,
+	51,
+
+	0,
 };
 
 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
@@ -1276,13 +1282,13 @@ static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
 }
 
 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
-	60000, 15000, // internal, sampling
-	1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
-	0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
-	(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
-	(0 << 25) | 0, // ifreq = 0.000000 MHz
-	20452225, // timf
-	12000000, // xtal_hz
+	60000, 15000,
+	1, 20, 3, 1, 0,
+	0, 0, 1, 1, 2,
+	(3 << 14) | (1 << 12) | (524 << 0),
+	(0 << 25) | 0,
+	20452225,
+	12000000,
 };
 
 static struct dib7000p_config dib7070p_dib7000p_config = {
@@ -1476,12 +1482,12 @@ static struct dib8000_config dib807x_dib8000_config[2] = {
 	}
 };
 
-static int dib807x_tuner_reset(struct dvb_frontend *fe, int onoff)
+static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
 {
 	return dib8000_set_gpio(fe, 5, 0, !onoff);
 }
 
-static int dib807x_tuner_sleep(struct dvb_frontend *fe, int onoff)
+static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
 {
 	return dib8000_set_gpio(fe, 0, 0, onoff);
 }
@@ -1494,8 +1500,8 @@ static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
 static struct dib0070_config dib807x_dib0070_config[2] = {
 	{
 		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib807x_tuner_reset,
-		.sleep = dib807x_tuner_sleep,
+		.reset = dib80xx_tuner_reset,
+		.sleep = dib80xx_tuner_sleep,
 		.clock_khz = 12000,
 		.clock_pad_drive = 4,
 		.vga_filter = 1,
@@ -1508,8 +1514,8 @@ static struct dib0070_config dib807x_dib0070_config[2] = {
 		.freq_offset_khz_vhf = -100,
 	}, {
 		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
-		.reset = dib807x_tuner_reset,
-		.sleep = dib807x_tuner_sleep,
+		.reset = dib80xx_tuner_reset,
+		.sleep = dib80xx_tuner_sleep,
 		.clock_khz = 12000,
 		.clock_pad_drive = 2,
 		.vga_filter = 1,
@@ -1566,12 +1572,14 @@ static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static int stk807x_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
+	u16 pid, int onoff)
 {
     return dib8000_pid_filter(adapter->fe, index, pid, onoff);
 }
 
-static int stk807x_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
+	int onoff)
 {
     return dib8000_pid_filter_ctrl(adapter->fe, onoff);
 }
@@ -1624,7 +1632,7 @@ static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
 	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
 
 	/* initialize IC 0 */
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x80);
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80);
 
 	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
 			      &dib807x_dib8000_config[0]);
@@ -1635,7 +1643,7 @@ static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
 static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
 {
 	/* initialize IC 1 */
-	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x82);
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82);
 
 	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
 			      &dib807x_dib8000_config[1]);
@@ -1643,6 +1651,245 @@ static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* STK8096GP */
+struct dibx000_agc_config dib8090_agc_config[2] = {
+    {
+	BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+     * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+     * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	787,
+	10,
+
+	0,
+	118,
+
+	0,
+	3530,
+	1,
+	5,
+
+	65535,
+	0,
+
+	65535,
+	0,
+
+	0,
+	32,
+	114,
+	143,
+	144,
+	114,
+	227,
+	116,
+	117,
+
+	28,
+	26,
+	31,
+	51,
+
+	0,
+    },
+    {
+	BAND_CBAND,
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
+     * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+     * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
+	| (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
+
+	787,
+	10,
+
+	0,
+	118,
+
+	0,
+	3530,
+	1,
+	5,
+
+	0,
+	0,
+
+	65535,
+	0,
+
+	0,
+	32,
+	114,
+	143,
+	144,
+	114,
+	227,
+	116,
+	117,
+
+	28,
+	26,
+	31,
+	51,
+
+	0,
+    }
+};
+
+static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
+    54000, 13500,
+    1, 18, 3, 1, 0,
+    0, 0, 1, 1, 2,
+    (3 << 14) | (1 << 12) | (599 << 0),
+    (0 << 25) | 0,
+    20199727,
+    12000000,
+};
+
+static int dib8090_get_adc_power(struct dvb_frontend *fe)
+{
+    return dib8000_get_adc_power(fe, 1);
+}
+
+static struct dib8000_config dib809x_dib8000_config = {
+    .output_mpeg2_in_188_bytes = 1,
+
+    .agc_config_count = 2,
+    .agc = dib8090_agc_config,
+    .agc_control = dib0090_dcc_freq,
+    .pll = &dib8090_pll_config_12mhz,
+    .tuner_is_baseband = 1,
+
+    .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+    .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+    .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+    .hostbus_diversity = 1,
+    .div_cfg = 0x31,
+    .output_mode = OUTMODE_MPEG2_FIFO,
+    .drives = 0x2d98,
+    .diversity_delay = 144,
+    .refclksel = 3,
+};
+
+static struct dib0090_config dib809x_dib0090_config = {
+    .io.pll_bypass = 1,
+    .io.pll_range = 1,
+    .io.pll_prediv = 1,
+    .io.pll_loopdiv = 20,
+    .io.adc_clock_ratio = 8,
+    .io.pll_int_loop_filt = 0,
+    .io.clock_khz = 12000,
+    .reset = dib80xx_tuner_reset,
+    .sleep = dib80xx_tuner_sleep,
+    .clkouttobamse = 1,
+    .analog_output = 1,
+    .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
+    .wbd_vhf_offset = 100,
+    .wbd_cband_offset = 450,
+    .use_pwm_agc = 1,
+    .clkoutdrive = 1,
+    .get_adc_power = dib8090_get_adc_power,
+	.freq_offset_khz_uhf = 0,
+	.freq_offset_khz_vhf = -143,
+};
+
+static int dib8096_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+    struct dvb_usb_adapter *adap = fe->dvb->priv;
+    struct dib0700_adapter_state *state = adap->priv;
+    u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+    u16 offset;
+    int ret = 0;
+    enum frontend_tune_state tune_state = CT_SHUTDOWN;
+    u16 ltgain, rf_gain_limit;
+
+    ret = state->set_param_save(fe, fep);
+    if (ret < 0)
+	return ret;
+
+    switch (band) {
+    case BAND_VHF:
+	    offset = 100;
+	    break;
+    case BAND_UHF:
+	    offset = 550;
+	    break;
+    default:
+	    offset = 0;
+	    break;
+    }
+    offset += (dib0090_get_wbd_offset(fe) * 8 * 18 / 33 + 1) / 2;
+    dib8000_set_wbd_ref(fe, offset);
+
+
+    if (band == BAND_CBAND) {
+	deb_info("tuning in CBAND - soft-AGC startup\n");
+	/* TODO specific wbd target for dib0090 - needed for startup ? */
+	dib0090_set_tune_state(fe, CT_AGC_START);
+	do {
+		ret = dib0090_gain_control(fe);
+		msleep(ret);
+		tune_state = dib0090_get_tune_state(fe);
+		if (tune_state == CT_AGC_STEP_0)
+			dib8000_set_gpio(fe, 6, 0, 1);
+		else if (tune_state == CT_AGC_STEP_1) {
+			dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, &ltgain);
+			if (rf_gain_limit == 0)
+				dib8000_set_gpio(fe, 6, 0, 0);
+		}
+	} while (tune_state < CT_AGC_STOP);
+	dib0090_pwm_gain_reset(fe);
+	dib8000_pwm_agc_reset(fe);
+	dib8000_set_tune_state(fe, CT_DEMOD_START);
+    } else {
+	deb_info("not tuning in CBAND - standard AGC startup\n");
+	dib0090_pwm_gain_reset(fe);
+    }
+
+    return 0;
+}
+
+static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+    struct dib0700_adapter_state *st = adap->priv;
+    struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+    if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+	return -ENODEV;
+
+    st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+    adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override;
+    return 0;
+}
+
+static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config);
+
+	return adap->fe == NULL ?  -ENODEV : 0;
+}
 
 /* STK7070PD */
 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
@@ -1929,14 +2176,17 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700D) },
 /* 55 */{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
 	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
-	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
-	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_PCTV,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PCTV,	USB_PID_PINNACLE_PCTV282E) },
 	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
 	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
 	{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
+/* 65 */{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK8096GP) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -2238,11 +2488,11 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 			{   "Pinnacle PCTV 73e SE",
-				{ &dib0700_usb_id_table[57], NULL },
+				{ &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
 				{ NULL },
 			},
 			{   "Pinnacle PCTV 282e",
-				{ &dib0700_usb_id_table[58], NULL },
+				{ &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
 				{ NULL },
 			},
 		},
@@ -2471,8 +2721,8 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{
 				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 				.pid_filter_count = 32,
-				.pid_filter = stk807x_pid_filter,
-				.pid_filter_ctrl = stk807x_pid_filter_ctrl,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
 				.frontend_attach  = stk807x_frontend_attach,
 				.tuner_attach     = dib807x_tuner_attach,
 
@@ -2510,8 +2760,8 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{
 				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 				.pid_filter_count = 32,
-				.pid_filter = stk807x_pid_filter,
-				.pid_filter_ctrl = stk807x_pid_filter_ctrl,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
 				.frontend_attach  = stk807xpvr_frontend_attach0,
 				.tuner_attach     = dib807x_tuner_attach,
 
@@ -2523,8 +2773,8 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{
 				.caps  = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 				.pid_filter_count = 32,
-				.pid_filter = stk807x_pid_filter,
-				.pid_filter_ctrl = stk807x_pid_filter_ctrl,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
 				.frontend_attach  = stk807xpvr_frontend_attach1,
 				.tuner_attach     = dib807x_tuner_attach,
 
@@ -2547,6 +2797,37 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 		.rc_key_map       = dib0700_rc_keys,
 		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
 		.rc_query         = dib0700_rc_query
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.caps  = DVB_USB_ADAP_HAS_PID_FILTER |
+					DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+				.pid_filter_count = 32,
+				.pid_filter = stk80xx_pid_filter,
+				.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+				.frontend_attach  = stk809x_frontend_attach,
+				.tuner_attach     = dib809x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK8096GP reference design",
+				{ &dib0700_usb_id_table[67], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index da34979b5337..9143b5631e88 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -142,8 +142,13 @@ static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
 		} else if ((msg[i].flags & I2C_M_RD) == 0) {
 			if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
 				break;
-		} else
-			break;
+		} else if (msg[i].addr != 0x50) {
+			/* 0x50 is the address of the eeprom - we need to protect it
+			 * from dibusb's bad i2c implementation: reads without
+			 * writing the offset before are forbidden */
+			if (dibusb_i2c_msg(d, msg[i].addr, NULL, 0, msg[i].buf, msg[i].len) < 0)
+				break;
+		}
 	}
 
 	mutex_unlock(&d->i2c_mutex);
@@ -243,6 +248,12 @@ static struct dib3000mc_config mod3000p_dib3000p_config = {
 
 int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap)
 {
+	if (adap->dev->udev->descriptor.idVendor  == USB_VID_LITEON &&
+			adap->dev->udev->descriptor.idProduct ==
+			USB_PID_LITEON_DVB_T_WARM) {
+		msleep(1000);
+	}
+
 	if ((adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000P_I2C_ADDRESS,  &mod3000p_dib3000p_config)) != NULL ||
 		(adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, DEFAULT_DIB3000MC_I2C_ADDRESS, &mod3000p_dib3000p_config)) != NULL) {
 		if (adap->priv != NULL) {
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index f1602d4ace6d..bc3581d58ced 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -47,6 +47,7 @@
 #define USB_VID_MSI_2				0x1462
 #define USB_VID_OPERA1				0x695c
 #define USB_VID_PINNACLE			0x2304
+#define USB_VID_PCTV				0x2013
 #define USB_VID_PIXELVIEW			0x1554
 #define USB_VID_TECHNOTREND			0x0b48
 #define USB_VID_TERRATEC			0x0ccd
@@ -101,6 +102,7 @@
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
 #define USB_PID_DIBCOM_STK807XP				0x1f90
 #define USB_PID_DIBCOM_STK807XPVR			0x1f98
+#define USB_PID_DIBCOM_STK8096GP                        0x1fa0
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
 #define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
@@ -211,6 +213,7 @@
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
 #define USB_PID_PINNACLE_PCTV73A			0x0243
 #define USB_PID_PINNACLE_PCTV73ESE			0x0245
+#define USB_PID_PINNACLE_PCTV74E			0x0246
 #define USB_PID_PINNACLE_PCTV282E			0x0248
 #define USB_PID_PIXELVIEW_SBTVD				0x5010
 #define USB_PID_PCTV_200E				0x020e
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 5bb9479d154e..64132c0cf80d 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -20,6 +20,11 @@
 #include "tda1002x.h"
 #include "mt312.h"
 #include "zl10039.h"
+#include "ds3000.h"
+#include "stv0900.h"
+#include "stv6110.h"
+#include "stb6100.h"
+#include "stb6100_proc.h"
 
 #ifndef USB_PID_DW2102
 #define USB_PID_DW2102 0x2102
@@ -37,12 +42,20 @@
 #define USB_PID_CINERGY_S 0x0064
 #endif
 
+#ifndef USB_PID_TEVII_S630
+#define USB_PID_TEVII_S630 0xd630
+#endif
+
 #ifndef USB_PID_TEVII_S650
 #define USB_PID_TEVII_S650 0xd650
 #endif
 
-#ifndef USB_PID_TEVII_S630
-#define USB_PID_TEVII_S630 0xd630
+#ifndef USB_PID_TEVII_S660
+#define USB_PID_TEVII_S660 0xd660
+#endif
+
+#ifndef USB_PID_PROF_1100
+#define USB_PID_PROF_1100 0xb012
 #endif
 
 #define DW210X_READ_MSG 0
@@ -55,6 +68,10 @@
 #define DW2102_VOLTAGE_CTRL (0x1800)
 #define DW2102_RC_QUERY (0x1a00)
 
+#define	err_str "did not find the firmware file. (%s) " \
+		"Please see linux/Documentation/dvb/ for more details " \
+		"on firmware-problems."
+
 struct dvb_usb_rc_keys_table {
 	struct dvb_usb_rc_key *rc_keys;
 	int rc_keys_size;
@@ -71,6 +88,12 @@ static int ir_keymap;
 module_param_named(keymap, ir_keymap, int, 0644);
 MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs  ...");
 
+/* demod probe */
+static int demod_probe = 1;
+module_param_named(demod, demod_probe, int, 0644);
+MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 "
+			"4=stv0903+stb6100(or-able)).");
+
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value,
@@ -183,7 +206,7 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
 	switch (num) {
 	case 2:
 		/* read si2109 register by number */
-		buf6[0] = 0xd0;
+		buf6[0] = msg[0].addr << 1;
 		buf6[1] = msg[0].len;
 		buf6[2] = msg[0].buf[0];
 		ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
@@ -198,7 +221,7 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
 		switch (msg[0].addr) {
 		case 0x68:
 			/* write to si2109 register */
-			buf6[0] = 0xd0;
+			buf6[0] = msg[0].addr << 1;
 			buf6[1] = msg[0].len;
 			memcpy(buf6 + 2, msg[0].buf, msg[0].len);
 			ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6,
@@ -239,7 +262,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
 		/* read */
 		/* first write first register number */
 		u8 ibuf[msg[1].len + 2], obuf[3];
-		obuf[0] = 0xd0;
+		obuf[0] = msg[0].addr << 1;
 		obuf[1] = msg[0].len;
 		obuf[2] = msg[0].buf[0];
 		ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
@@ -256,7 +279,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
 		case 0x68: {
 			/* write to register */
 			u8 obuf[msg[0].len + 2];
-			obuf[0] = 0xd0;
+			obuf[0] = msg[0].addr << 1;
 			obuf[1] = msg[0].len;
 			memcpy(obuf + 2, msg[0].buf, msg[0].len);
 			ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
@@ -266,7 +289,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms
 		case 0x61: {
 			/* write to tuner */
 			u8 obuf[msg[0].len + 2];
-			obuf[0] = 0xc2;
+			obuf[0] = msg[0].addr << 1;
 			obuf[1] = msg[0].len;
 			memcpy(obuf + 2, msg[0].buf, msg[0].len);
 			ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
@@ -301,78 +324,78 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
 	int ret = 0;
-	int len, i;
+	int len, i, j;
 
 	if (!d)
 		return -ENODEV;
 	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 		return -EAGAIN;
 
-	switch (num) {
-	case 2: {
-		/* read */
-		/* first write first register number */
-		u8 ibuf[msg[1].len + 2], obuf[3];
-		obuf[0] = 0xaa;
-		obuf[1] = msg[0].len;
-		obuf[2] = msg[0].buf[0];
-		ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
-				obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-		/* second read registers */
-		ret = dw210x_op_rw(d->udev, 0xc3, 0xab , 0,
-				ibuf, msg[1].len + 2, DW210X_READ_MSG);
-		memcpy(msg[1].buf, ibuf + 2, msg[1].len);
-
-		break;
-	}
-	case 1:
-		switch (msg[0].addr) {
-		case 0x55: {
-			if (msg[0].buf[0] == 0xf7) {
-				/* firmware */
-				/* Write in small blocks */
-				u8 obuf[19];
-				obuf[0] = 0xaa;
-				obuf[1] = 0x11;
-				obuf[2] = 0xf7;
-				len = msg[0].len - 1;
-				i = 1;
-				do {
-					memcpy(obuf + 3, msg[0].buf + i, (len > 16 ? 16 : len));
-					ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
-						obuf, (len > 16 ? 16 : len) + 3, DW210X_WRITE_MSG);
-					i += 16;
-					len -= 16;
-				} while (len > 0);
-			} else {
-				/* write to register */
-				u8 obuf[msg[0].len + 2];
-				obuf[0] = 0xaa;
-				obuf[1] = msg[0].len;
-				memcpy(obuf + 2, msg[0].buf, msg[0].len);
-				ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
-						obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-			}
-			break;
-		}
+	for (j = 0; j < num; j++) {
+		switch (msg[j].addr) {
 		case(DW2102_RC_QUERY): {
 			u8 ibuf[2];
 			ret  = dw210x_op_rw(d->udev, 0xb8, 0, 0,
 					ibuf, 2, DW210X_READ_MSG);
-			memcpy(msg[0].buf, ibuf , 2);
+			memcpy(msg[j].buf, ibuf , 2);
 			break;
 		}
 		case(DW2102_VOLTAGE_CTRL): {
 			u8 obuf[2];
 			obuf[0] = 0x30;
-			obuf[1] = msg[0].buf[0];
+			obuf[1] = msg[j].buf[0];
 			ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
 					obuf, 2, DW210X_WRITE_MSG);
 			break;
 		}
+		/*case 0x55: cx24116
+		case 0x6a: stv0903
+		case 0x68: ds3000, stv0903
+		case 0x60: ts2020, stv6110, stb6100 */
+		default: {
+			if (msg[j].flags == I2C_M_RD) {
+				/* read registers */
+				u8  ibuf[msg[j].len + 2];
+				ret = dw210x_op_rw(d->udev, 0xc3,
+						(msg[j].addr << 1) + 1, 0,
+						ibuf, msg[j].len + 2,
+						DW210X_READ_MSG);
+				memcpy(msg[j].buf, ibuf + 2, msg[j].len);
+			mdelay(10);
+			} else if (((msg[j].buf[0] == 0xb0) &&
+						(msg[j].addr == 0x68)) ||
+						((msg[j].buf[0] == 0xf7) &&
+						(msg[j].addr == 0x55))) {
+				/* write firmware */
+				u8 obuf[19];
+				obuf[0] = msg[j].addr << 1;
+				obuf[1] = (msg[j].len > 15 ? 17 : msg[j].len);
+				obuf[2] = msg[j].buf[0];
+				len = msg[j].len - 1;
+				i = 1;
+				do {
+					memcpy(obuf + 3, msg[j].buf + i,
+							(len > 16 ? 16 : len));
+					ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+						obuf, (len > 16 ? 16 : len) + 3,
+						DW210X_WRITE_MSG);
+					i += 16;
+					len -= 16;
+				} while (len > 0);
+			} else {
+				/* write registers */
+				u8 obuf[msg[j].len + 2];
+				obuf[0] = msg[j].addr << 1;
+				obuf[1] = msg[j].len;
+				memcpy(obuf + 2, msg[j].buf, msg[j].len);
+				ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+						obuf, msg[j].len + 2,
+						DW210X_WRITE_MSG);
+			}
+			break;
+		}
 		}
 
-		break;
 	}
 
 	mutex_unlock(&d->i2c_mutex);
@@ -442,63 +465,85 @@ static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 	return num;
 }
 
-static int s630_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 								int num)
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
 	int ret = 0;
+	int len, i, j;
 
 	if (!d)
 		return -ENODEV;
 	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 		return -EAGAIN;
 
-	switch (num) {
-	case 2: { /* read */
-		u8 ibuf[msg[1].len], obuf[3];
-		obuf[0] = msg[1].len;
-		obuf[1] = (msg[0].addr << 1);
-		obuf[2] = msg[0].buf[0];
-
-		ret = dw210x_op_rw(d->udev, 0x90, 0, 0,
-					obuf, 3, DW210X_WRITE_MSG);
-		msleep(5);
-		ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
-					ibuf, msg[1].len, DW210X_READ_MSG);
-		memcpy(msg[1].buf, ibuf, msg[1].len);
-		break;
-	}
-	case 1:
-		switch (msg[0].addr) {
-		case 0x60:
-		case 0x0e: {
-			/* write to zl10313, zl10039 register, */
-			u8 obuf[msg[0].len + 2];
-			obuf[0] = msg[0].len + 1;
-			obuf[1] = (msg[0].addr << 1);
-			memcpy(obuf + 2, msg[0].buf, msg[0].len);
-			ret = dw210x_op_rw(d->udev, 0x80, 0, 0,
-					obuf, msg[0].len + 2, DW210X_WRITE_MSG);
-			break;
-		}
+	for (j = 0; j < num; j++) {
+		switch (msg[j].addr) {
 		case (DW2102_RC_QUERY): {
 			u8 ibuf[4];
 			ret  = dw210x_op_rw(d->udev, 0xb8, 0, 0,
 					ibuf, 4, DW210X_READ_MSG);
-			msg[0].buf[0] = ibuf[3];
+			memcpy(msg[j].buf, ibuf + 1, 2);
 			break;
 		}
 		case (DW2102_VOLTAGE_CTRL): {
 			u8 obuf[2];
-			obuf[0] = 0x03;
-			obuf[1] = msg[0].buf[0];
+			obuf[0] = 3;
+			obuf[1] = msg[j].buf[0];
 			ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
 					obuf, 2, DW210X_WRITE_MSG);
 			break;
 		}
+		/*case 0x55: cx24116
+		case 0x6a: stv0903
+		case 0x68: ds3000, stv0903
+		case 0x60: ts2020, stv6110, stb6100
+		case 0xa0: eeprom */
+		default: {
+			if (msg[j].flags == I2C_M_RD) {
+				/* read registers */
+				u8 ibuf[msg[j].len];
+				ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
+						ibuf, msg[j].len,
+						DW210X_READ_MSG);
+				memcpy(msg[j].buf, ibuf, msg[j].len);
+				break;
+			} else if ((msg[j].buf[0] == 0xb0) &&
+						(msg[j].addr == 0x68)) {
+				/* write firmware */
+				u8 obuf[19];
+				obuf[0] = (msg[j].len > 16 ?
+						18 : msg[j].len + 1);
+				obuf[1] = msg[j].addr << 1;
+				obuf[2] = msg[j].buf[0];
+				len = msg[j].len - 1;
+				i = 1;
+				do {
+					memcpy(obuf + 3, msg[j].buf + i,
+							(len > 16 ? 16 : len));
+					ret = dw210x_op_rw(d->udev, 0x80, 0, 0,
+						obuf, (len > 16 ? 16 : len) + 3,
+						DW210X_WRITE_MSG);
+					i += 16;
+					len -= 16;
+				} while (len > 0);
+			} else {
+				/* write registers */
+				u8 obuf[msg[j].len + 2];
+				obuf[0] = msg[j].len + 1;
+				obuf[1] = (msg[j].addr << 1);
+				memcpy(obuf + 2, msg[j].buf, msg[j].len);
+				ret = dw210x_op_rw(d->udev,
+						(num > 1 ? 0x90 : 0x80), 0, 0,
+						obuf, msg[j].len + 2,
+						DW210X_WRITE_MSG);
+				break;
+			}
+			break;
+		}
 		}
 
-		break;
+		msleep(3);
 	}
 
 	mutex_unlock(&d->i2c_mutex);
@@ -535,8 +580,8 @@ static struct i2c_algorithm dw3101_i2c_algo = {
 	.functionality = dw210x_i2c_func,
 };
 
-static struct i2c_algorithm s630_i2c_algo = {
-	.master_xfer = s630_i2c_transfer,
+static struct i2c_algorithm s6x0_i2c_algo = {
+	.master_xfer = s6x0_i2c_transfer,
 	.functionality = dw210x_i2c_func,
 };
 
@@ -564,25 +609,34 @@ static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 	return 0;
 };
 
-static int s630_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 {
 	int i, ret;
-	u8 buf[3], eeprom[256], eepromline[16];
+	u8 ibuf[] = { 0 }, obuf[] = { 0 };
+	u8 eeprom[256], eepromline[16];
+	struct i2c_msg msg[] = {
+		{
+			.addr = 0xa0 >> 1,
+			.flags = 0,
+			.buf = obuf,
+			.len = 1,
+		}, {
+			.addr = 0xa0 >> 1,
+			.flags = I2C_M_RD,
+			.buf = ibuf,
+			.len = 1,
+		}
+	};
 
 	for (i = 0; i < 256; i++) {
-		buf[0] = 1;
-		buf[1] = 0xa0;
-		buf[2] = i;
-		ret = dw210x_op_rw(d->udev, 0x90, 0, 0,
-					buf, 3, DW210X_WRITE_MSG);
-		ret = dw210x_op_rw(d->udev, 0x91, 0, 0,
-					buf, 1, DW210X_READ_MSG);
-		if (ret < 0) {
+		obuf[0] = i;
+		ret = s6x0_i2c_transfer(&d->i2c_adap, msg, 2);
+		if (ret != 2) {
 			err("read eeprom failed.");
 			return -1;
 		} else {
-			eepromline[i % 16] = buf[0];
-			eeprom[i] = buf[0];
+			eepromline[i % 16] = ibuf[0];
+			eeprom[i] = ibuf[0];
 		}
 
 		if ((i % 16) == 15) {
@@ -644,19 +698,104 @@ static struct mt312_config zl313_config = {
 	.demod_address = 0x0e,
 };
 
+static struct ds3000_config dw2104_ds3000_config = {
+	.demod_address = 0x68,
+};
+
+static struct stv0900_config dw2104a_stv0900_config = {
+	.demod_address = 0x6a,
+	.demod_mode = 0,
+	.xtal = 27000000,
+	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+	.diseqc_mode = 2,/* 2/3 PWM */
+	.tun1_maddress = 0,/* 0x60 */
+	.tun1_adc = 0,/* 2 Vpp */
+	.path1_mode = 3,
+};
+
+static struct stb6100_config dw2104a_stb6100_config = {
+	.tuner_address = 0x60,
+	.refclock = 27000000,
+};
+
+static struct stv0900_config dw2104_stv0900_config = {
+	.demod_address = 0x68,
+	.demod_mode = 0,
+	.xtal = 8000000,
+	.clkmode = 3,
+	.diseqc_mode = 2,
+	.tun1_maddress = 0,
+	.tun1_adc = 1,/* 1 Vpp */
+	.path1_mode = 3,
+};
+
+static struct stv6110_config dw2104_stv6110_config = {
+	.i2c_address = 0x60,
+	.mclk = 16000000,
+	.clk_div = 1,
+};
+
 static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
 {
-	if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config,
-			&d->dev->i2c_adap)) != NULL) {
+	struct dvb_tuner_ops *tuner_ops = NULL;
+
+	if (demod_probe & 4) {
+		d->fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config,
+				&d->dev->i2c_adap, 0);
+		if (d->fe != NULL) {
+			if (dvb_attach(stb6100_attach, d->fe,
+					&dw2104a_stb6100_config,
+					&d->dev->i2c_adap)) {
+				tuner_ops = &d->fe->ops.tuner_ops;
+				tuner_ops->set_frequency = stb6100_set_freq;
+				tuner_ops->get_frequency = stb6100_get_freq;
+				tuner_ops->set_bandwidth = stb6100_set_bandw;
+				tuner_ops->get_bandwidth = stb6100_get_bandw;
+				d->fe->ops.set_voltage = dw210x_set_voltage;
+				info("Attached STV0900+STB6100!\n");
+				return 0;
+			}
+		}
+	}
+
+	if (demod_probe & 2) {
+		d->fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config,
+				&d->dev->i2c_adap, 0);
+		if (d->fe != NULL) {
+			if (dvb_attach(stv6110_attach, d->fe,
+					&dw2104_stv6110_config,
+					&d->dev->i2c_adap)) {
+				d->fe->ops.set_voltage = dw210x_set_voltage;
+				info("Attached STV0900+STV6110A!\n");
+				return 0;
+			}
+		}
+	}
+
+	if (demod_probe & 1) {
+		d->fe = dvb_attach(cx24116_attach, &dw2104_config,
+				&d->dev->i2c_adap);
+		if (d->fe != NULL) {
+			d->fe->ops.set_voltage = dw210x_set_voltage;
+			info("Attached cx24116!\n");
+			return 0;
+		}
+	}
+
+	d->fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
+			&d->dev->i2c_adap);
+	if (d->fe != NULL) {
 		d->fe->ops.set_voltage = dw210x_set_voltage;
-		info("Attached cx24116!\n");
+		info("Attached DS3000!\n");
 		return 0;
 	}
+
 	return -EIO;
 }
 
 static struct dvb_usb_device_properties dw2102_properties;
 static struct dvb_usb_device_properties dw2104_properties;
+static struct dvb_usb_device_properties s6x0_properties;
 
 static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
 {
@@ -670,14 +809,17 @@ static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
 			return 0;
 		}
 	}
+
 	if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) {
-		/*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
 		d->fe = dvb_attach(stv0288_attach, &earda_config,
 					&d->dev->i2c_adap);
 		if (d->fe != NULL) {
-			d->fe->ops.set_voltage = dw210x_set_voltage;
-			info("Attached stv0288!\n");
-			return 0;
+			if (dvb_attach(stb6000_attach, d->fe, 0x61,
+					&d->dev->i2c_adap)) {
+				d->fe->ops.set_voltage = dw210x_set_voltage;
+				info("Attached stv0288!\n");
+				return 0;
+			}
 		}
 	}
 
@@ -705,15 +847,38 @@ static int dw3101_frontend_attach(struct dvb_usb_adapter *d)
 	return -EIO;
 }
 
-static int s630_frontend_attach(struct dvb_usb_adapter *d)
+static int s6x0_frontend_attach(struct dvb_usb_adapter *d)
 {
 	d->fe = dvb_attach(mt312_attach, &zl313_config,
-				&d->dev->i2c_adap);
+			&d->dev->i2c_adap);
+	if (d->fe != NULL) {
+		if (dvb_attach(zl10039_attach, d->fe, 0x60,
+				&d->dev->i2c_adap)) {
+			d->fe->ops.set_voltage = dw210x_set_voltage;
+			info("Attached zl100313+zl10039!\n");
+			return 0;
+		}
+	}
+
+	d->fe = dvb_attach(stv0288_attach, &earda_config,
+			&d->dev->i2c_adap);
+	if (d->fe != NULL) {
+		if (dvb_attach(stb6000_attach, d->fe, 0x61,
+				&d->dev->i2c_adap)) {
+			d->fe->ops.set_voltage = dw210x_set_voltage;
+			info("Attached stv0288+stb6000!\n");
+			return 0;
+		}
+	}
+
+	d->fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config,
+			&d->dev->i2c_adap);
 	if (d->fe != NULL) {
 		d->fe->ops.set_voltage = dw210x_set_voltage;
-		info("Attached zl10313!\n");
+		info("Attached ds3000+ds2020!\n");
 		return 0;
 	}
+
 	return -EIO;
 }
 
@@ -724,14 +889,6 @@ static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(stb6000_attach, adap->fe, 0x61,
-		&adap->dev->i2c_adap);
-
-	return 0;
-}
-
 static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
@@ -740,14 +897,6 @@ static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static int s630_zl10039_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	dvb_attach(zl10039_attach, adap->fe, 0x60,
-		&adap->dev->i2c_adap);
-
-	return 0;
-}
-
 static struct dvb_usb_rc_key dw210x_rc_keys[] = {
 	{ 0xf80a, KEY_Q },		/*power*/
 	{ 0xf80c, KEY_M },		/*mute*/
@@ -922,6 +1071,8 @@ static struct usb_device_id dw2102_table[] = {
 	{USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)},
 	{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)},
 	{USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
+	{USB_DEVICE(0x3011, USB_PID_PROF_1100)},
+	{USB_DEVICE(0x9022, USB_PID_TEVII_S660)},
 	{ }
 };
 
@@ -935,15 +1086,13 @@ static int dw2102_load_firmware(struct usb_device *dev,
 	u8 reset;
 	u8 reset16[] = {0, 0, 0, 0, 0, 0, 0};
 	const struct firmware *fw;
-	const char *filename = "dvb-usb-dw2101.fw";
+	const char *fw_2101 = "dvb-usb-dw2101.fw";
 
 	switch (dev->descriptor.idProduct) {
 	case 0x2101:
-		ret = request_firmware(&fw, filename, &dev->dev);
+		ret = request_firmware(&fw, fw_2101, &dev->dev);
 		if (ret != 0) {
-			err("did not find the firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details "
-			"on firmware-problems.", filename);
+			err(err_str, fw_2101);
 			return ret;
 		}
 		break;
@@ -983,6 +1132,11 @@ static int dw2102_load_firmware(struct usb_device *dev,
 		}
 		/* init registers */
 		switch (dev->descriptor.idProduct) {
+		case USB_PID_PROF_1100:
+			s6x0_properties.rc_key_map = tbs_rc_keys;
+			s6x0_properties.rc_key_map_size =
+					ARRAY_SIZE(tbs_rc_keys);
+			break;
 		case USB_PID_TEVII_S650:
 			dw2104_properties.rc_key_map = tevii_rc_keys;
 			dw2104_properties.rc_key_map_size =
@@ -1021,7 +1175,6 @@ static int dw2102_load_firmware(struct usb_device *dev,
 						DW210X_READ_MSG);
 				if (reset16[2] == 0x11) {
 					dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo;
-					dw2102_properties.adapter->tuner_attach = &dw2102_earda_tuner_attach;
 					break;
 				}
 			}
@@ -1184,13 +1337,13 @@ static struct dvb_usb_device_properties dw3101_properties = {
 	}
 };
 
-static struct dvb_usb_device_properties s630_properties = {
+static struct dvb_usb_device_properties s6x0_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 	.usb_ctrl = DEVICE_SPECIFIC,
 	.firmware = "dvb-usb-s630.fw",
 	.no_reconnect = 1,
 
-	.i2c_algo = &s630_i2c_algo,
+	.i2c_algo = &s6x0_i2c_algo,
 	.rc_key_map = tevii_rc_keys,
 	.rc_key_map_size = ARRAY_SIZE(tevii_rc_keys),
 	.rc_interval = 150,
@@ -1199,12 +1352,12 @@ static struct dvb_usb_device_properties s630_properties = {
 	.generic_bulk_ctrl_endpoint = 0x81,
 	.num_adapters = 1,
 	.download_firmware = dw2102_load_firmware,
-	.read_mac_address = s630_read_mac_address,
+	.read_mac_address = s6x0_read_mac_address,
 	.adapter = {
 		{
-			.frontend_attach = s630_frontend_attach,
+			.frontend_attach = s6x0_frontend_attach,
 			.streaming_ctrl = NULL,
-			.tuner_attach = s630_zl10039_tuner_attach,
+			.tuner_attach = NULL,
 			.stream = {
 				.type = USB_BULK,
 				.count = 8,
@@ -1217,12 +1370,20 @@ static struct dvb_usb_device_properties s630_properties = {
 			},
 		}
 	},
-	.num_device_descs = 1,
+	.num_device_descs = 3,
 	.devices = {
 		{"TeVii S630 USB",
 			{&dw2102_table[6], NULL},
 			{NULL},
 		},
+		{"Prof 1100 USB ",
+			{&dw2102_table[7], NULL},
+			{NULL},
+		},
+		{"TeVii S660 USB",
+			{&dw2102_table[8], NULL},
+			{NULL},
+		},
 	}
 };
 
@@ -1235,10 +1396,10 @@ static int dw2102_probe(struct usb_interface *intf,
 			THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &dw3101_properties,
 			THIS_MODULE, NULL, adapter_nr) ||
-	    0 == dvb_usb_device_init(intf, &s630_properties,
-			THIS_MODULE, NULL, adapter_nr)) {
+	    0 == dvb_usb_device_init(intf, &s6x0_properties,
+			THIS_MODULE, NULL, adapter_nr))
 		return 0;
-	}
+
 	return -ENODEV;
 }
 
@@ -1269,6 +1430,7 @@ module_exit(dw2102_module_exit);
 MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
 MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
 				" DVB-C 3101 USB2.0,"
-				" TeVii S600, S630, S650 USB2.0 devices");
+				" TeVii S600, S630, S650, S660 USB2.0,"
+				" Prof 1100 USB2.0 devices");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index 9cbbe42ca44b..ebb7b9fd115b 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -134,11 +134,13 @@ static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
 	deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
 	       state->frontend.ops.info.frequency_stepsize);
 	/* freq -> oscilator frequency conversion. */
-	/* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */
-	/* add 400[1/7 MHZ] = 57.142857MHz.   57MHz for the IF,  */
-	/*                                   1/7MHz for center freq shift */
+	/* freq: 473,000,000 + n*6,000,000 [+ 142857 (center freq. shift)] */
 	f = freq / state->frontend.ops.info.frequency_stepsize;
-	f += 400;
+	/* add 399[1/7 MHZ] = 57MHz for the IF  */
+	f += 399;
+	/* add center frequency shift if necessary */
+	if (f % 7 == 0)
+		f++;
 	pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
 	pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
 	pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
index 20eadf9318e0..7a7f1b2b681c 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
@@ -146,8 +146,8 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend* fe,
 
 	switch (c->delivery_system) {
 	case SYS_DVBS:
-		/* Only QPSK is supported for DVB-S */
-		if (c->modulation != QPSK) {
+		/* Allow QPSK and 8PSK (even for DVB-S) */
+		if (c->modulation != QPSK && c->modulation != PSK_8) {
 			deb_fe("%s: unsupported modulation selected (%d)\n",
 				__func__, c->modulation);
 			return -EOPNOTSUPP;