[media] Rename media/dvb as media/pci

The remaining dvb drivers are pci, so rename them to match the
bus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 680 deletions

diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
deleted file mode 100644
index 2cb35c23d2ac..000000000000
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * budget-patch.c: driver for Budget Patch,
- * hardware modification of DVB-S cards enabling full TS
- *
- * Written by Emard <emard@softhome.net>
- *
- * Original idea by Roberto Deza <rdeza@unav.es>
- *
- * Special thanks to Holger Waechtler, Michael Hunold, Marian Durkovic
- * and Metzlerbros
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
- *
- *
- * the project's page is at http://www.linuxtv.org/ 
- */
-
-#include "av7110.h"
-#include "av7110_hw.h"
-#include "budget.h"
-#include "stv0299.h"
-#include "ves1x93.h"
-#include "tda8083.h"
-
-#include "bsru6.h"
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define budget_patch budget
-
-static struct saa7146_extension budget_extension;
-
-MAKE_BUDGET_INFO(ttbp, "TT-Budget/Patch DVB-S 1.x PCI", BUDGET_PATCH);
-//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
-
-static struct pci_device_id pci_tbl[] = {
-	MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
-//        MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
-	{
-		.vendor    = 0,
-	}
-};
-
-/* those lines are for budget-patch to be tried
-** on a true budget card and observe the
-** behaviour of VSYNC generated by rps1.
-** this code was shamelessly copy/pasted from budget.c
-*/
-static void gpio_Set22K (struct budget *budget, int state)
-{
-	struct saa7146_dev *dev=budget->dev;
-	dprintk(2, "budget: %p\n", budget);
-	saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
-}
-
-/* Diseqc functions only for TT Budget card */
-/* taken from the Skyvision DVB driver by
-   Ralph Metzler <rjkm@metzlerbros.de> */
-
-static void DiseqcSendBit (struct budget *budget, int data)
-{
-	struct saa7146_dev *dev=budget->dev;
-	dprintk(2, "budget: %p\n", budget);
-
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-	udelay(data ? 500 : 1000);
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	udelay(data ? 1000 : 500);
-}
-
-static void DiseqcSendByte (struct budget *budget, int data)
-{
-	int i, par=1, d;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	for (i=7; i>=0; i--) {
-		d = (data>>i)&1;
-		par ^= d;
-		DiseqcSendBit(budget, d);
-	}
-
-	DiseqcSendBit(budget, par);
-}
-
-static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
-{
-	struct saa7146_dev *dev=budget->dev;
-	int i;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	mdelay(16);
-
-	for (i=0; i<len; i++)
-		DiseqcSendByte(budget, msg[i]);
-
-	mdelay(16);
-
-	if (burst!=-1) {
-		if (burst)
-			DiseqcSendByte(budget, 0xff);
-		else {
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-			mdelay(12);
-			udelay(500);
-			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-		}
-		msleep(20);
-	}
-
-	return 0;
-}
-
-/* shamelessly copy/pasted from budget.c
-*/
-static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		gpio_Set22K (budget, 1);
-		break;
-
-	case SEC_TONE_OFF:
-		gpio_Set22K (budget, 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
-
-	return 0;
-}
-
-static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-
-	SendDiSEqCMsg (budget, 0, NULL, minicmd);
-
-	return 0;
-}
-
-static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
-{
-	int i;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	for (i = 2; i < length; i++)
-	{
-		  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
-		  msleep(5);
-	}
-	if (length)
-		  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
-	else
-		  ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
-	msleep(5);
-	ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
-	msleep(5);
-	return 0;
-}
-
-static void av7110_set22k(struct budget_patch *budget, int state)
-{
-	u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
-
-	dprintk(2, "budget: %p\n", budget);
-	budget_av7110_send_fw_cmd(budget, buf, 2);
-}
-
-static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
-{
-	int i;
-	u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
-		16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
-	dprintk(2, "budget: %p\n", budget);
-
-	if (len>10)
-		len=10;
-
-	buf[1] = len+2;
-	buf[2] = len;
-
-	if (burst != -1)
-		buf[3]=burst ? 0x01 : 0x00;
-	else
-		buf[3]=0xffff;
-
-	for (i=0; i<len; i++)
-		buf[i+4]=msg[i];
-
-	budget_av7110_send_fw_cmd(budget, buf, 18);
-	return 0;
-}
-
-static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-
-	switch (tone) {
-	case SEC_TONE_ON:
-		av7110_set22k (budget, 1);
-		break;
-
-	case SEC_TONE_OFF:
-		av7110_set22k (budget, 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int budget_patch_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
-{
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-
-	av7110_send_diseqc_msg (budget, cmd->msg_len, cmd->msg, 0);
-
-	return 0;
-}
-
-static int budget_patch_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
-{
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-
-	av7110_send_diseqc_msg (budget, 0, NULL, minicmd);
-
-	return 0;
-}
-
-static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-	u8 pwr = 0;
-	u8 buf[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	u32 div = (p->frequency + 479500) / 125;
-
-	if (p->frequency > 2000000)
-		pwr = 3;
-	else if (p->frequency > 1800000)
-		pwr = 2;
-	else if (p->frequency > 1600000)
-		pwr = 1;
-	else if (p->frequency > 1200000)
-		pwr = 0;
-	else if (p->frequency >= 1100000)
-		pwr = 1;
-	else pwr = 2;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = ((div & 0x18000) >> 10) | 0x95;
-	buf[3] = (pwr << 6) | 0x30;
-
-	// NOTE: since we're using a prescaler of 2, we set the
-	// divisor frequency to 62.5kHz and divide by 125 above
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct ves1x93_config alps_bsrv2_config = {
-	.demod_address = 0x08,
-	.xin = 90100000UL,
-	.invert_pwm = 0,
-};
-
-static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct budget_patch* budget = (struct budget_patch*) fe->dvb->priv;
-	u32 div;
-	u8 data[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	div = p->frequency / 125;
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x8e;
-	data[3] = 0x00;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static struct tda8083_config grundig_29504_451_config = {
-	.demod_address = 0x68,
-};
-
-static void frontend_init(struct budget_patch* budget)
-{
-	switch(budget->dev->pci->subsystem_device) {
-	case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
-	case 0x1013: // SATELCO Multimedia PCI
-
-		// try the ALPS BSRV2 first of all
-		budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
-			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_patch_diseqc_send_master_cmd;
-			budget->dvb_frontend->ops.diseqc_send_burst = budget_patch_diseqc_send_burst;
-			budget->dvb_frontend->ops.set_tone = budget_patch_set_tone;
-			break;
-		}
-
-		// try the ALPS BSRU6 now
-		budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
-			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
-
-			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
-			budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
-			budget->dvb_frontend->ops.set_tone = budget_set_tone;
-			break;
-		}
-
-		// Try the grundig 29504-451
-		budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
-			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
-			budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
-			budget->dvb_frontend->ops.set_tone = budget_set_tone;
-			break;
-		}
-		break;
-	}
-
-	if (budget->dvb_frontend == NULL) {
-		printk("dvb-ttpci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
-		       budget->dev->pci->vendor,
-		       budget->dev->pci->device,
-		       budget->dev->pci->subsystem_vendor,
-		       budget->dev->pci->subsystem_device);
-	} else {
-		if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) {
-			printk("budget-av: Frontend registration failed!\n");
-			dvb_frontend_detach(budget->dvb_frontend);
-			budget->dvb_frontend = NULL;
-		}
-	}
-}
-
-/* written by Emard */
-static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
-{
-	struct budget_patch *budget;
-	int err;
-	int count = 0;
-	int detected = 0;
-
-#define PATCH_RESET 0
-#define RPS_IRQ 0
-#define HPS_SETUP 0
-#if PATCH_RESET
-	saa7146_write(dev, MC1, MASK_31);
-	msleep(40);
-#endif
-#if HPS_SETUP
-	// initialize registers. Better to have it like this
-	// than leaving something unconfigured
-	saa7146_write(dev, DD1_STREAM_B, 0);
-	// port B VSYNC at rising edge
-	saa7146_write(dev, DD1_INIT, 0x00000200);  // have this in budget-core too!
-	saa7146_write(dev, BRS_CTRL, 0x00000000);  // VBI
-
-	// debi config
-	// saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
-
-	// zero all HPS registers
-	saa7146_write(dev, HPS_H_PRESCALE, 0);                  // r68
-	saa7146_write(dev, HPS_H_SCALE, 0);                     // r6c
-	saa7146_write(dev, BCS_CTRL, 0);                        // r70
-	saa7146_write(dev, HPS_V_SCALE, 0);                     // r60
-	saa7146_write(dev, HPS_V_GAIN, 0);                      // r64
-	saa7146_write(dev, CHROMA_KEY_RANGE, 0);                // r74
-	saa7146_write(dev, CLIP_FORMAT_CTRL, 0);                // r78
-	// Set HPS prescaler for port B input
-	saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
-	saa7146_write(dev, MC2,
-	  0 * (MASK_08 | MASK_24)  |   // BRS control
-	  0 * (MASK_09 | MASK_25)  |   // a
-	  0 * (MASK_10 | MASK_26)  |   // b
-	  1 * (MASK_06 | MASK_22)  |   // HPS_CTRL1
-	  1 * (MASK_05 | MASK_21)  |   // HPS_CTRL2
-	  0 * (MASK_01 | MASK_15)      // DEBI
-	   );
-#endif
-	// Disable RPS1 and RPS0
-	saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
-	// RPS1 timeout disable
-	saa7146_write(dev, RPS_TOV1, 0);
-
-	// code for autodetection
-	// will wait for VBI_B event (vertical blank at port B)
-	// and will reset GPIO3 after VBI_B is detected.
-	// (GPIO3 should be raised high by CPU to
-	// test if GPIO3 will generate vertical blank signal
-	// in budget patch GPIO3 is connected to VSYNC_B
-	count = 0;
-#if 0
-	WRITE_RPS1(CMD_UPLOAD |
-	  MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
-#endif
-	WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
-	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-	WRITE_RPS1(GPIO3_MSK);
-	WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
-#if RPS_IRQ
-	// issue RPS1 interrupt to increment counter
-	WRITE_RPS1(CMD_INTERRUPT);
-	// at least a NOP is neede between two interrupts
-	WRITE_RPS1(CMD_NOP);
-	// interrupt again
-	WRITE_RPS1(CMD_INTERRUPT);
-#endif
-	WRITE_RPS1(CMD_STOP);
-
-#if RPS_IRQ
-	// set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
-	// use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
-	// use 0x15 to track VPE  interrupts - increase by 1 every vpeirq() is called
-	saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
-	// set event counter 1 threshold to maximum allowed value        (rEC p55)
-	saa7146_write(dev, ECT1R,  0x3fff );
-#endif
-	// Fix VSYNC level
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	// Set RPS1 Address register to point to RPS code               (r108 p42)
-	saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-	// Enable RPS1,                                                 (rFC p33)
-	saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
-
-
-	mdelay(50);
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-	mdelay(150);
-
-
-	if( (saa7146_read(dev, GPIO_CTRL) & 0x10000000) == 0)
-		detected = 1;
-
-#if RPS_IRQ
-	printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
-#endif
-	// Disable RPS1
-	saa7146_write(dev, MC1, ( MASK_29 ));
-
-	if(detected == 0)
-		printk("budget-patch not detected or saa7146 in non-default state.\n"
-		       "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
-
-	else
-		printk("BUDGET-PATCH DETECTED.\n");
-
-
-/*      OLD (Original design by Roberto Deza):
-**      This code will setup the SAA7146_RPS1 to generate a square
-**      wave on GPIO3, changing when a field (TS_HEIGHT/2 "lines" of
-**      TS_WIDTH packets) has been acquired on SAA7146_D1B video port;
-**      then, this GPIO3 output which is connected to the D1B_VSYNC
-**      input, will trigger the acquisition of the alternate field
-**      and so on.
-**      Currently, the TT_budget / WinTV_Nova cards have two ICs
-**      (74HCT4040, LVC74) for the generation of this VSYNC signal,
-**      which seems that can be done perfectly without this :-)).
-*/
-
-/*      New design (By Emard)
-**      this rps1 code will copy internal HS event to GPIO3 pin.
-**      GPIO3 is in budget-patch hardware connected to port B VSYNC
-
-**      HS is an internal event of 7146, accessible with RPS
-**      and temporarily raised high every n lines
-**      (n in defined in the RPS_THRESH1 counter threshold)
-**      I think HS is raised high on the beginning of the n-th line
-**      and remains high until this n-th line that triggered
-**      it is completely received. When the reception of n-th line
-**      ends, HS is lowered.
-
-**      To transmit data over DMA, 7146 needs changing state at
-**      port B VSYNC pin. Any changing of port B VSYNC will
-**      cause some DMA data transfer, with more or less packets loss.
-**      It depends on the phase and frequency of VSYNC and
-**      the way of 7146 is instructed to trigger on port B (defined
-**      in DD1_INIT register, 3rd nibble from the right valid
-**      numbers are 0-7, see datasheet)
-**
-**      The correct triggering can minimize packet loss,
-**      dvbtraffic should give this stable bandwidths:
-**        22k transponder = 33814 kbit/s
-**      27.5k transponder = 38045 kbit/s
-**      by experiment it is found that the best results
-**      (stable bandwidths and almost no packet loss)
-**      are obtained using DD1_INIT triggering number 2
-**      (Va at rising edge of VS Fa = HS x VS-failing forced toggle)
-**      and a VSYNC phase that occurs in the middle of DMA transfer
-**      (about byte 188*512=96256 in the DMA window).
-**
-**      Phase of HS is still not clear to me how to control,
-**      It just happens to be so. It can be seen if one enables
-**      RPS_IRQ and print Event Counter 1 in vpeirq(). Every
-**      time RPS_INTERRUPT is called, the Event Counter 1 will
-**      increment. That's how the 7146 is programmed to do event
-**      counting in this budget-patch.c
-**      I *think* HPS setting has something to do with the phase
-**      of HS but I can't be 100% sure in that.
-
-**      hardware debug note: a working budget card (including budget patch)
-**      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
-**      generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
-**      and that means 3*25=75 Hz of interrupt frequency, as seen by
-**      watch cat /proc/interrupts
-**
-**      If this frequency is 3x lower (and data received in the DMA
-**      buffer don't start with 0x47, but in the middle of packets,
-**      whose lengths appear to be like 188 292 188 104 etc.
-**      this means VSYNC line is not connected in the hardware.
-**      (check soldering pcb and pins)
-**      The same behaviour of missing VSYNC can be duplicated on budget
-**      cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
-*/
-
-	// Setup RPS1 "program" (p35)
-	count = 0;
-
-
-	// Wait Source Line Counter Threshold                           (p36)
-	WRITE_RPS1(CMD_PAUSE | EVT_HS);
-	// Set GPIO3=1                                                  (p42)
-	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-	WRITE_RPS1(GPIO3_MSK);
-	WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
-#if RPS_IRQ
-	// issue RPS1 interrupt
-	WRITE_RPS1(CMD_INTERRUPT);
-#endif
-	// Wait reset Source Line Counter Threshold                     (p36)
-	WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
-	// Set GPIO3=0                                                  (p42)
-	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
-	WRITE_RPS1(GPIO3_MSK);
-	WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
-#if RPS_IRQ
-	// issue RPS1 interrupt
-	WRITE_RPS1(CMD_INTERRUPT);
-#endif
-	// Jump to begin of RPS program                                 (p37)
-	WRITE_RPS1(CMD_JUMP);
-	WRITE_RPS1(dev->d_rps1.dma_handle);
-
-	// Fix VSYNC level
-	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
-	// Set RPS1 Address register to point to RPS code               (r108 p42)
-	saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
-
-	if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
-		return -ENOMEM;
-
-	dprintk(2, "budget: %p\n", budget);
-
-	err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
-	if (err) {
-		kfree(budget);
-		return err;
-	}
-
-	// Set Source Line Counter Threshold, using BRS                 (rCC p43)
-	// It generates HS event every TS_HEIGHT lines
-	// this is related to TS_WIDTH set in register
-	// NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
-	// low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
-	//,then RPS_THRESH1
-	// should be set to trigger every TS_HEIGHT (512) lines.
-	//
-	saa7146_write(dev, RPS_THRESH1, budget->buffer_height | MASK_12 );
-
-	// saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
-	// Enable RPS1                                                  (rFC p33)
-	saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-
-	dev->ext_priv = budget;
-
-	budget->dvb_adapter.priv = budget;
-	frontend_init(budget);
-
-	ttpci_budget_init_hooks(budget);
-
-	return 0;
-}
-
-static int budget_patch_detach (struct saa7146_dev* dev)
-{
-	struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
-	int err;
-
-	if (budget->dvb_frontend) {
-		dvb_unregister_frontend(budget->dvb_frontend);
-		dvb_frontend_detach(budget->dvb_frontend);
-	}
-	err = ttpci_budget_deinit (budget);
-
-	kfree (budget);
-
-	return err;
-}
-
-static int __init budget_patch_init(void)
-{
-	return saa7146_register_extension(&budget_extension);
-}
-
-static void __exit budget_patch_exit(void)
-{
-	saa7146_unregister_extension(&budget_extension);
-}
-
-static struct saa7146_extension budget_extension = {
-	.name           = "budget_patch dvb",
-	.flags          = 0,
-
-	.module         = THIS_MODULE,
-	.pci_tbl        = pci_tbl,
-	.attach         = budget_patch_attach,
-	.detach         = budget_patch_detach,
-
-	.irq_mask       = MASK_10,
-	.irq_func       = ttpci_budget_irq10_handler,
-};
-
-module_init(budget_patch_init);
-module_exit(budget_patch_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
-MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
-		   "based so-called Budget Patch cards");