diff options
| author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-06-14 21:35:56 +0200 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-08-14 04:26:31 +0200 |
| commit | 786baecfe78f8e25547c628b48a60fc8e5636056 (patch) | |
| tree | bb4101ce010f55cbbfc6d93ee13b44b496a028cc /drivers/media/dvb | |
| parent | [media] firewire: move it one level up (diff) | |
| download | linux-786baecfe78f8e25547c628b48a60fc8e5636056.tar.xz linux-786baecfe78f8e25547c628b48a60fc8e5636056.zip | |
[media] dvb-usb: move it to drivers/media/usb/dvb-usb
As media/dvb will be removed, move it to a proper place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb')
129 files changed, 0 insertions, 59181 deletions
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index b4665460c74d..e2565a45de9b 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -15,14 +15,6 @@ comment "Supported SAA7146 based PCI Adapters" depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/ttpci/Kconfig" -comment "Supported USB Adapters" - depends on DVB_CORE && USB && I2C -source "drivers/media/dvb/dvb-usb/Kconfig" -source "drivers/media/dvb/dvb-usb-v2/Kconfig" -source "drivers/media/dvb/ttusb-budget/Kconfig" -source "drivers/media/dvb/ttusb-dec/Kconfig" -source "drivers/media/dvb/siano/Kconfig" - comment "Supported FlexCopII (B2C2) Adapters" depends on DVB_CORE && (PCI || USB) && I2C source "drivers/media/dvb/b2c2/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index fc248268cb5a..c5fa43a275ae 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -3,14 +3,9 @@ # obj-y := ttpci/ \ - ttusb-dec/ \ - ttusb-budget/ \ b2c2/ \ bt8xx/ \ - dvb-usb/ \ - dvb-usb-v2/ \ pluto2/ \ - siano/ \ dm1105/ \ pt1/ \ mantis/ \ diff --git a/drivers/media/dvb/dvb-usb-v2/Kconfig b/drivers/media/dvb/dvb-usb-v2/Kconfig deleted file mode 100644 index 276374fbaf4f..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/Kconfig +++ /dev/null @@ -1,146 +0,0 @@ -config DVB_USB_V2 - tristate "Support for various USB DVB devices v2" - depends on DVB_CORE && USB && I2C && RC_CORE - help - By enabling this you will be able to choose the various supported - USB1.1 and USB2.0 DVB devices. - - Almost every USB device needs a firmware, please look into - <file:Documentation/dvb/README.dvb-usb>. - - For a complete list of supported USB devices see the LinuxTV DVB Wiki: - <http://www.linuxtv.org/wiki/index.php/DVB_USB> - - Say Y if you own a USB DVB device. - -config DVB_USB_CYPRESS_FIRMWARE - tristate "Cypress firmware helper routines" - depends on DVB_USB_V2 - -config DVB_USB_AF9015 - tristate "Afatech AF9015 DVB-T USB2.0 support" - depends on DVB_USB_V2 - select DVB_AF9013 - select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver - -config DVB_USB_AF9035 - tristate "Afatech AF9035 DVB-T USB2.0 support" - depends on DVB_USB_V2 - select DVB_AF9033 - select MEDIA_TUNER_TUA9001 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0011 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA18218 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Afatech AF9035 based DVB USB receiver. - -config DVB_USB_ANYSEE - tristate "Anysee DVB-T/C USB2.0 support" - depends on DVB_USB_V2 - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE - select DVB_CX24116 if !DVB_FE_CUSTOMISE - select DVB_STV0900 if !DVB_FE_CUSTOMISE - select DVB_STV6110 if !DVB_FE_CUSTOMISE - select DVB_ISL6423 if !DVB_FE_CUSTOMISE - select DVB_CXD2820R if !DVB_FE_CUSTOMISE - help - Say Y here to support the Anysee E30, Anysee E30 Plus or - Anysee E30 C Plus DVB USB2.0 receiver. - -config DVB_USB_AU6610 - tristate "Alcor Micro AU6610 USB2.0 support" - depends on DVB_USB_V2 - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. - -config DVB_USB_AZ6007 - tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support" - depends on DVB_USB_V2 - select DVB_USB_CYPRESS_FIRMWARE - select DVB_DRXK if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2063 if !DVB_FE_CUSTOMISE - help - Say Y here to support the AZ6007 receivers like Terratec H7. - -config DVB_USB_CE6230 - tristate "Intel CE6230 DVB-T USB2.0 support" - depends on DVB_USB_V2 - select DVB_ZL10353 - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver - -config DVB_USB_EC168 - tristate "E3C EC168 DVB-T USB2.0 support" - depends on DVB_USB_V2 - select DVB_EC100 - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the E3C EC168 DVB-T USB2.0 receiver. - -config DVB_USB_GL861 - tristate "Genesys Logic GL861 USB2.0 support" - depends on DVB_USB_V2 - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 - receiver with USB ID 0db0:5581. - -config DVB_USB_IT913X - tristate "ITE IT913X DVB-T USB2.0 support" - depends on DVB_USB_V2 - select DVB_IT913X_FE - help - Say Y here to support the ITE IT913X DVB-T USB2.0 - -config DVB_USB_LME2510 - tristate "LME DM04/QQBOX DVB-S USB2.0 support" - depends on DVB_USB_V2 - select DVB_TDA10086 if !DVB_FE_CUSTOMISE - select DVB_TDA826X if !DVB_FE_CUSTOMISE - select DVB_STV0288 if !DVB_FE_CUSTOMISE - select DVB_IX2505V if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_M88RS2000 if !DVB_FE_CUSTOMISE - help - Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 - -config DVB_USB_MXL111SF - tristate "MxL111SF DTV USB2.0 support" - depends on DVB_USB_V2 - select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_LG2160 if !DVB_FE_CUSTOMISE - select VIDEO_TVEEPROM - help - Say Y here to support the MxL111SF USB2.0 DTV receiver. - -config DVB_USB_RTL28XXU - tristate "Realtek RTL28xxU DVB USB support" - depends on DVB_USB_V2 && EXPERIMENTAL - select DVB_RTL2830 - select DVB_RTL2832 - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Realtek RTL28xxU DVB USB receiver. - diff --git a/drivers/media/dvb/dvb-usb-v2/Makefile b/drivers/media/dvb/dvb-usb-v2/Makefile deleted file mode 100644 index 24248b3acd4f..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/Makefile +++ /dev/null @@ -1,48 +0,0 @@ -dvb_usbv2-objs = dvb_usb_core.o dvb_usb_urb.o usb_urb.o -obj-$(CONFIG_DVB_USB_V2) += dvb_usbv2.o - -dvb_usb_cypress_firmware-objs = cypress_firmware.o -obj-$(CONFIG_DVB_USB_CYPRESS_FIRMWARE) += dvb_usb_cypress_firmware.o - -dvb-usb-af9015-objs = af9015.o -obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o - -dvb-usb-af9035-objs = af9035.o -obj-$(CONFIG_DVB_USB_AF9035) += dvb-usb-af9035.o - -dvb-usb-anysee-objs = anysee.o -obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o - -dvb-usb-au6610-objs = au6610.o -obj-$(CONFIG_DVB_USB_AU6610) += dvb-usb-au6610.o - -dvb-usb-az6007-objs = az6007.o -obj-$(CONFIG_DVB_USB_AZ6007) += dvb-usb-az6007.o - -dvb-usb-ce6230-objs = ce6230.o -obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o - -dvb-usb-ec168-objs = ec168.o -obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o - -dvb-usb-it913x-objs = it913x.o -obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o - -dvb-usb-lmedm04-objs = lmedm04.o -obj-$(CONFIG_DVB_USB_LME2510) += dvb-usb-lmedm04.o - -dvb-usb-gl861-objs = gl861.o -obj-$(CONFIG_DVB_USB_GL861) += dvb-usb-gl861.o - -dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o -obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o -obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o -obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o - -dvb-usb-rtl28xxu-objs = rtl28xxu.o -obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o - -ccflags-y += -I$(srctree)/drivers/media/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb-frontends -ccflags-y += -I$(srctree)/drivers/media/common/tuners - diff --git a/drivers/media/dvb/dvb-usb-v2/af9015.c b/drivers/media/dvb/dvb-usb-v2/af9015.c deleted file mode 100644 index e77429b37a7d..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/af9015.c +++ /dev/null @@ -1,1434 +0,0 @@ -/* - * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver - * - * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> - * - * Thanks to Afatech who kindly provided information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include "af9015.h" - -static int dvb_usb_af9015_debug; -module_param_named(debug, dvb_usb_af9015_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -static int dvb_usb_af9015_remote; -module_param_named(remote, dvb_usb_af9015_remote, int, 0644); -MODULE_PARM_DESC(remote, "select remote"); -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) -{ -#define BUF_LEN 63 -#define REQ_HDR_LEN 8 /* send header size */ -#define ACK_HDR_LEN 2 /* rece header size */ - struct af9015_state *state = d_to_priv(d); - int ret, wlen, rlen; - u8 buf[BUF_LEN]; - u8 write = 1; - - buf[0] = req->cmd; - buf[1] = state->seq++; - buf[2] = req->i2c_addr; - buf[3] = req->addr >> 8; - buf[4] = req->addr & 0xff; - buf[5] = req->mbox; - buf[6] = req->addr_len; - buf[7] = req->data_len; - - switch (req->cmd) { - case GET_CONFIG: - case READ_MEMORY: - case RECONNECT_USB: - write = 0; - break; - case READ_I2C: - write = 0; - buf[2] |= 0x01; /* set I2C direction */ - case WRITE_I2C: - buf[0] = READ_WRITE_I2C; - break; - case WRITE_MEMORY: - if (((req->addr & 0xff00) == 0xff00) || - ((req->addr & 0xff00) == 0xae00)) - buf[0] = WRITE_VIRTUAL_MEMORY; - case WRITE_VIRTUAL_MEMORY: - case COPY_FIRMWARE: - case DOWNLOAD_FIRMWARE: - case BOOT: - break; - default: - err("unknown command:%d", req->cmd); - ret = -1; - goto error; - } - - /* buffer overflow check */ - if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) || - (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) { - err("too much data; cmd:%d len:%d", req->cmd, req->data_len); - ret = -EINVAL; - goto error; - } - - /* write receives seq + status = 2 bytes - read receives seq + status + data = 2 + N bytes */ - wlen = REQ_HDR_LEN; - rlen = ACK_HDR_LEN; - if (write) { - wlen += req->data_len; - memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len); - } else { - rlen += req->data_len; - } - - /* no ack for these packets */ - if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) - rlen = 0; - - ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen); - if (ret) - goto error; - - /* check status */ - if (rlen && buf[1]) { - err("command failed:%d", buf[1]); - ret = -1; - goto error; - } - - /* read request, copy returned data to return buf */ - if (!write) - memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len); -error: - return ret; -} - -static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, - u8 len) -{ - struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, - val}; - return af9015_ctrl_msg(d, &req); -} - -static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len) -{ - struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, - val}; - return af9015_ctrl_msg(d, &req); -} - -static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) -{ - return af9015_write_regs(d, addr, &val, 1); -} - -static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) -{ - return af9015_read_regs(d, addr, val, 1); -} - -static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, - u8 val) -{ - struct af9015_state *state = d_to_priv(d); - struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; - - if (addr == state->af9013_config[0].i2c_addr || - addr == state->af9013_config[1].i2c_addr) - req.addr_len = 3; - - return af9015_ctrl_msg(d, &req); -} - -static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, - u8 *val) -{ - struct af9015_state *state = d_to_priv(d); - struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; - - if (addr == state->af9013_config[0].i2c_addr || - addr == state->af9013_config[1].i2c_addr) - req.addr_len = 3; - - return af9015_ctrl_msg(d, &req); -} - -static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) -{ - int ret; - u8 val, mask = 0x01; - - ret = af9015_read_reg(d, addr, &val); - if (ret) - return ret; - - mask <<= bit; - if (op) { - /* set bit */ - val |= mask; - } else { - /* clear bit */ - mask ^= 0xff; - val &= mask; - } - - return af9015_write_reg(d, addr, val); -} - -static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) -{ - return af9015_do_reg_bit(d, addr, bit, 1); -} - -static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) -{ - return af9015_do_reg_bit(d, addr, bit, 0); -} - -static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct af9015_state *state = d_to_priv(d); - int ret = 0, i = 0; - u16 addr; - u8 uninitialized_var(mbox), addr_len; - struct req_t req; - -/* -The bus lock is needed because there is two tuners both using same I2C-address. -Due to that the only way to select correct tuner is use demodulator I2C-gate. - -................................................ -. AF9015 includes integrated AF9013 demodulator. -. ____________ ____________ . ____________ -.| uC | | demod | . | tuner | -.|------------| |------------| . |------------| -.| AF9015 | | AF9013/5 | . | MXL5003 | -.| |--+----I2C-------|-----/ -----|-.-----I2C-------| | -.| | | | addr 0x38 | . | addr 0xc6 | -.|____________| | |____________| . |____________| -.................|.............................. - | ____________ ____________ - | | demod | | tuner | - | |------------| |------------| - | | AF9013 | | MXL5003 | - +----I2C-------|-----/ -----|-------I2C-------| | - | addr 0x3a | | addr 0xc6 | - |____________| |____________| -*/ - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - while (i < num) { - if (msg[i].addr == state->af9013_config[0].i2c_addr || - msg[i].addr == state->af9013_config[1].i2c_addr) { - addr = msg[i].buf[0] << 8; - addr += msg[i].buf[1]; - mbox = msg[i].buf[2]; - addr_len = 3; - } else { - addr = msg[i].buf[0]; - addr_len = 1; - /* mbox is don't care in that case */ - } - - if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { - if (msg[i].len > 3 || msg[i+1].len > 61) { - ret = -EOPNOTSUPP; - goto error; - } - if (msg[i].addr == state->af9013_config[0].i2c_addr) - req.cmd = READ_MEMORY; - else - req.cmd = READ_I2C; - req.i2c_addr = msg[i].addr; - req.addr = addr; - req.mbox = mbox; - req.addr_len = addr_len; - req.data_len = msg[i+1].len; - req.data = &msg[i+1].buf[0]; - ret = af9015_ctrl_msg(d, &req); - i += 2; - } else if (msg[i].flags & I2C_M_RD) { - if (msg[i].len > 61) { - ret = -EOPNOTSUPP; - goto error; - } - if (msg[i].addr == state->af9013_config[0].i2c_addr) { - ret = -EINVAL; - goto error; - } - req.cmd = READ_I2C; - req.i2c_addr = msg[i].addr; - req.addr = addr; - req.mbox = mbox; - req.addr_len = addr_len; - req.data_len = msg[i].len; - req.data = &msg[i].buf[0]; - ret = af9015_ctrl_msg(d, &req); - i += 1; - } else { - if (msg[i].len > 21) { - ret = -EOPNOTSUPP; - goto error; - } - if (msg[i].addr == state->af9013_config[0].i2c_addr) - req.cmd = WRITE_MEMORY; - else - req.cmd = WRITE_I2C; - req.i2c_addr = msg[i].addr; - req.addr = addr; - req.mbox = mbox; - req.addr_len = addr_len; - req.data_len = msg[i].len-addr_len; - req.data = &msg[i].buf[addr_len]; - ret = af9015_ctrl_msg(d, &req); - i += 1; - } - if (ret) - goto error; - - } - ret = i; - -error: - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static u32 af9015_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm af9015_i2c_algo = { - .master_xfer = af9015_i2c_xfer, - .functionality = af9015_i2c_func, -}; - -static int af9015_identify_state(struct dvb_usb_device *d, const char **name) -{ - int ret; - u8 reply; - struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; - - ret = af9015_ctrl_msg(d, &req); - if (ret) - return ret; - - deb_info("%s: reply:%02x\n", __func__, reply); - if (reply == 0x02) - ret = WARM; - else - ret = COLD; - - return ret; -} - -static int af9015_download_firmware(struct dvb_usb_device *d, - const struct firmware *fw) -{ - struct af9015_state *state = d_to_priv(d); - int i, len, remaining, ret; - struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; - u16 checksum = 0; - - deb_info("%s:\n", __func__); - - /* calc checksum */ - for (i = 0; i < fw->size; i++) - checksum += fw->data[i]; - - state->firmware_size = fw->size; - state->firmware_checksum = checksum; - - #define FW_ADDR 0x5100 /* firmware start address */ - #define LEN_MAX 55 /* max packet size */ - for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { - len = remaining; - if (len > LEN_MAX) - len = LEN_MAX; - - req.data_len = len; - req.data = (u8 *) &fw->data[fw->size - remaining]; - req.addr = FW_ADDR + fw->size - remaining; - - ret = af9015_ctrl_msg(d, &req); - if (ret) { - err("firmware download failed:%d", ret); - goto error; - } - } - - /* firmware loaded, request boot */ - req.cmd = BOOT; - req.data_len = 0; - ret = af9015_ctrl_msg(d, &req); - if (ret) { - err("firmware boot failed:%d", ret); - goto error; - } - -error: - return ret; -} - -/* hash (and dump) eeprom */ -static int af9015_eeprom_hash(struct dvb_usb_device *d) -{ - struct af9015_state *state = d_to_priv(d); - int ret; - static const unsigned int eeprom_size = 256; - unsigned int reg; - u8 val, *eeprom; - struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - - eeprom = kmalloc(eeprom_size, GFP_KERNEL); - if (eeprom == NULL) - return -ENOMEM; - - for (reg = 0; reg < eeprom_size; reg++) { - req.addr = reg; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto free; - - eeprom[reg] = val; - } - - if (dvb_usb_af9015_debug & 0x01) - print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom, - eeprom_size); - - BUG_ON(eeprom_size % 4); - - state->eeprom_sum = 0; - for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) { - state->eeprom_sum *= GOLDEN_RATIO_PRIME_32; - state->eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]); - } - - deb_info("%s: eeprom sum=%.8x\n", __func__, state->eeprom_sum); - - ret = 0; -free: - kfree(eeprom); - return ret; -} - -static int af9015_read_config(struct dvb_usb_device *d) -{ - struct af9015_state *state = d_to_priv(d); - int ret; - u8 val, i, offset = 0; - struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - - deb_info("%s:\n", __func__); - - /* IR remote controller */ - req.addr = AF9015_EEPROM_IR_MODE; - /* first message will timeout often due to possible hw bug */ - for (i = 0; i < 4; i++) { - ret = af9015_ctrl_msg(d, &req); - if (!ret) - break; - } - if (ret) - goto error; - - ret = af9015_eeprom_hash(d); - if (ret) - goto error; - - deb_info("%s: IR mode=%d\n", __func__, val); - state->ir_mode = val; - - /* TS mode - one or two receivers */ - req.addr = AF9015_EEPROM_TS_MODE; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - - state->dual_mode = val; - deb_info("%s: TS mode=%d\n", __func__, state->dual_mode); - - /* disable 2nd adapter because we don't have PID-filters */ - if (d->udev->speed == USB_SPEED_FULL) - state->dual_mode = 0; - - if (state->dual_mode) { - /* read 2nd demodulator I2C address */ - req.addr = AF9015_EEPROM_DEMOD2_I2C; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - - state->af9013_config[1].i2c_addr = val; - } - - for (i = 0; i < state->dual_mode + 1; i++) { - if (i == 1) - offset = AF9015_EEPROM_OFFSET; - /* xtal */ - req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - switch (val) { - case 0: - state->af9013_config[i].clock = 28800000; - break; - case 1: - state->af9013_config[i].clock = 20480000; - break; - case 2: - state->af9013_config[i].clock = 28000000; - break; - case 3: - state->af9013_config[i].clock = 25000000; - break; - }; - deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i, - val, state->af9013_config[i].clock); - - /* IF frequency */ - req.addr = AF9015_EEPROM_IF1H + offset; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - - state->af9013_config[i].if_frequency = val << 8; - - req.addr = AF9015_EEPROM_IF1L + offset; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - - state->af9013_config[i].if_frequency += val; - state->af9013_config[i].if_frequency *= 1000; - deb_info("%s: [%d] IF frequency=%d\n", __func__, i, - state->af9013_config[i].if_frequency); - - /* MT2060 IF1 */ - req.addr = AF9015_EEPROM_MT2060_IF1H + offset; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - state->mt2060_if1[i] = val << 8; - req.addr = AF9015_EEPROM_MT2060_IF1L + offset; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - state->mt2060_if1[i] += val; - deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i, - state->mt2060_if1[i]); - - /* tuner */ - req.addr = AF9015_EEPROM_TUNER_ID1 + offset; - ret = af9015_ctrl_msg(d, &req); - if (ret) - goto error; - switch (val) { - case AF9013_TUNER_ENV77H11D5: - case AF9013_TUNER_MT2060: - case AF9013_TUNER_QT1010: - case AF9013_TUNER_UNKNOWN: - case AF9013_TUNER_MT2060_2: - case AF9013_TUNER_TDA18271: - case AF9013_TUNER_QT1010A: - case AF9013_TUNER_TDA18218: - state->af9013_config[i].spec_inv = 1; - break; - case AF9013_TUNER_MXL5003D: - case AF9013_TUNER_MXL5005D: - case AF9013_TUNER_MXL5005R: - case AF9013_TUNER_MXL5007T: - state->af9013_config[i].spec_inv = 0; - break; - case AF9013_TUNER_MC44S803: - state->af9013_config[i].gpio[1] = AF9013_GPIO_LO; - state->af9013_config[i].spec_inv = 1; - break; - default: - warn("tuner id=%d not supported, please report!", val); - return -ENODEV; - }; - - state->af9013_config[i].tuner = val; - deb_info("%s: [%d] tuner id=%d\n", __func__, i, val); - } - -error: - if (ret) - err("eeprom read failed=%d", ret); - - /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM - content :-( Override some wrong values here. Ditto for the - AVerTV Red HD+ (A850T) device. */ - if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA && - ((le16_to_cpu(d->udev->descriptor.idProduct) == - USB_PID_AVERMEDIA_A850) || - (le16_to_cpu(d->udev->descriptor.idProduct) == - USB_PID_AVERMEDIA_A850T))) { - deb_info("%s: AverMedia A850: overriding config\n", __func__); - /* disable dual mode */ - state->dual_mode = 0; - - /* set correct IF */ - state->af9013_config[0].if_frequency = 4570000; - } - - return ret; -} - -static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, - struct usb_data_stream_properties *stream) -{ - deb_info("%s: adap=%d\n", __func__, fe_to_adap(fe)->id); - - if (fe_to_d(fe)->udev->speed == USB_SPEED_FULL) - stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE; - - return 0; -} - -static int af9015_get_adapter_count(struct dvb_usb_device *d) -{ - struct af9015_state *state = d_to_priv(d); - return state->dual_mode + 1; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_set_frontend(struct dvb_frontend *fe) -{ - int ret; - struct af9015_state *state = fe_to_priv(fe); - - if (mutex_lock_interruptible(&state->fe_mutex)) - return -EAGAIN; - - ret = state->set_frontend[fe_to_adap(fe)->id](fe); - - mutex_unlock(&state->fe_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_read_status(struct dvb_frontend *fe, - fe_status_t *status) -{ - int ret; - struct af9015_state *state = fe_to_priv(fe); - - if (mutex_lock_interruptible(&state->fe_mutex)) - return -EAGAIN; - - ret = state->read_status[fe_to_adap(fe)->id](fe, status); - - mutex_unlock(&state->fe_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_init(struct dvb_frontend *fe) -{ - int ret; - struct af9015_state *state = fe_to_priv(fe); - - if (mutex_lock_interruptible(&state->fe_mutex)) - return -EAGAIN; - - ret = state->init[fe_to_adap(fe)->id](fe); - - mutex_unlock(&state->fe_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_sleep(struct dvb_frontend *fe) -{ - int ret; - struct af9015_state *state = fe_to_priv(fe); - - if (mutex_lock_interruptible(&state->fe_mutex)) - return -EAGAIN; - - ret = state->sleep[fe_to_adap(fe)->id](fe); - - mutex_unlock(&state->fe_mutex); - - return ret; -} - -/* override tuner callbacks for resource locking */ -static int af9015_tuner_init(struct dvb_frontend *fe) -{ - int ret; - struct af9015_state *state = fe_to_priv(fe); - - if (mutex_lock_interruptible(&state->fe_mutex)) - return -EAGAIN; - - ret = state->tuner_init[fe_to_adap(fe)->id](fe); - - mutex_unlock(&state->fe_mutex); - - return ret; -} - -/* override tuner callbacks for resource locking */ -static int af9015_tuner_sleep(struct dvb_frontend *fe) -{ - int ret; - struct af9015_state *state = fe_to_priv(fe); - - if (mutex_lock_interruptible(&state->fe_mutex)) - return -EAGAIN; - - ret = state->tuner_sleep[fe_to_adap(fe)->id](fe); - - mutex_unlock(&state->fe_mutex); - - return ret; -} - -static int af9015_copy_firmware(struct dvb_usb_device *d) -{ - struct af9015_state *state = d_to_priv(d); - int ret; - u8 fw_params[4]; - u8 val, i; - struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), - fw_params }; - deb_info("%s:\n", __func__); - - fw_params[0] = state->firmware_size >> 8; - fw_params[1] = state->firmware_size & 0xff; - fw_params[2] = state->firmware_checksum >> 8; - fw_params[3] = state->firmware_checksum & 0xff; - - /* wait 2nd demodulator ready */ - msleep(100); - - ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, - 0x98be, &val); - if (ret) - goto error; - else - deb_info("%s: firmware status:%02x\n", __func__, val); - - if (val == 0x0c) /* fw is running, no need for download */ - goto exit; - - /* set I2C master clock to fast (to speed up firmware copy) */ - ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ - if (ret) - goto error; - - msleep(50); - - /* copy firmware */ - ret = af9015_ctrl_msg(d, &req); - if (ret) - err("firmware copy cmd failed:%d", ret); - deb_info("%s: firmware copy done\n", __func__); - - /* set I2C master clock back to normal */ - ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ - if (ret) - goto error; - - /* request boot firmware */ - ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr, - 0xe205, 1); - deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); - if (ret) - goto error; - - for (i = 0; i < 15; i++) { - msleep(100); - - /* check firmware status */ - ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, - 0x98be, &val); - deb_info("%s: firmware status cmd status:%d fw status:%02x\n", - __func__, ret, val); - if (ret) - goto error; - - if (val == 0x0c || val == 0x04) /* success or fail */ - break; - } - - if (val == 0x04) { - err("firmware did not run"); - ret = -1; - } else if (val != 0x0c) { - err("firmware boot timeout"); - ret = -1; - } - -error: -exit: - return ret; -} - -static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) -{ - int ret; - struct af9015_state *state = adap_to_priv(adap); - - if (adap->id == 0) { - state->af9013_config[0].ts_mode = AF9013_TS_USB; - memcpy(state->af9013_config[0].api_version, "\x0\x1\x9\x0", 4); - state->af9013_config[0].gpio[0] = AF9013_GPIO_HI; - state->af9013_config[0].gpio[3] = AF9013_GPIO_TUNER_ON; - } else if (adap->id == 1) { - state->af9013_config[1].ts_mode = AF9013_TS_SERIAL; - memcpy(state->af9013_config[1].api_version, "\x0\x1\x9\x0", 4); - state->af9013_config[1].gpio[0] = AF9013_GPIO_TUNER_ON; - state->af9013_config[1].gpio[1] = AF9013_GPIO_LO; - - /* copy firmware to 2nd demodulator */ - if (state->dual_mode) { - ret = af9015_copy_firmware(adap_to_d(adap)); - if (ret) { - err("firmware copy to 2nd frontend " \ - "failed, will disable it"); - state->dual_mode = 0; - return -ENODEV; - } - } else { - return -ENODEV; - } - } - - /* attach demodulator */ - adap->fe[0] = dvb_attach(af9013_attach, - &state->af9013_config[adap->id], &adap_to_d(adap)->i2c_adap); - - /* - * AF9015 firmware does not like if it gets interrupted by I2C adapter - * request on some critical phases. During normal operation I2C adapter - * is used only 2nd demodulator and tuner on dual tuner devices. - * Override demodulator callbacks and use mutex for limit access to - * those "critical" paths to keep AF9015 happy. - */ - if (adap->fe[0]) { - state->set_frontend[adap->id] = - adap->fe[0]->ops.set_frontend; - adap->fe[0]->ops.set_frontend = - af9015_af9013_set_frontend; - - state->read_status[adap->id] = - adap->fe[0]->ops.read_status; - adap->fe[0]->ops.read_status = - af9015_af9013_read_status; - - state->init[adap->id] = adap->fe[0]->ops.init; - adap->fe[0]->ops.init = af9015_af9013_init; - - state->sleep[adap->id] = adap->fe[0]->ops.sleep; - adap->fe[0]->ops.sleep = af9015_af9013_sleep; - } - - return adap->fe[0] == NULL ? -ENODEV : 0; -} - -static struct mt2060_config af9015_mt2060_config = { - .i2c_address = 0xc0, - .clock_out = 0, -}; - -static struct qt1010_config af9015_qt1010_config = { - .i2c_address = 0xc4, -}; - -static struct tda18271_config af9015_tda18271_config = { - .gate = TDA18271_GATE_DIGITAL, - .small_i2c = TDA18271_16_BYTE_CHUNK_INIT, -}; - -static struct mxl5005s_config af9015_mxl5003_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_DEFAULT, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static struct mxl5005s_config af9015_mxl5005_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_OFF, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static struct mc44s803_config af9015_mc44s803_config = { - .i2c_address = 0xc0, - .dig_out = 1, -}; - -static struct tda18218_config af9015_tda18218_config = { - .i2c_address = 0xc0, - .i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */ -}; - -static struct mxl5007t_config af9015_mxl5007t_config = { - .xtal_freq_hz = MxL_XTAL_24_MHZ, - .if_freq_hz = MxL_IF_4_57_MHZ, -}; - -static int af9015_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct af9015_state *state = adap_to_priv(adap); - int ret; - deb_info("%s:\n", __func__); - - switch (state->af9013_config[adap->id].tuner) { - case AF9013_TUNER_MT2060: - case AF9013_TUNER_MT2060_2: - ret = dvb_attach(mt2060_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, &af9015_mt2060_config, - state->mt2060_if1[adap->id]) - == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_QT1010: - case AF9013_TUNER_QT1010A: - ret = dvb_attach(qt1010_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &af9015_qt1010_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_TDA18271: - ret = dvb_attach(tda18271_attach, adap->fe[0], 0xc0, - &adap_to_d(adap)->i2c_adap, - &af9015_tda18271_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_TDA18218: - ret = dvb_attach(tda18218_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &af9015_tda18218_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MXL5003D: - ret = dvb_attach(mxl5005s_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &af9015_mxl5003_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MXL5005D: - case AF9013_TUNER_MXL5005R: - ret = dvb_attach(mxl5005s_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &af9015_mxl5005_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_ENV77H11D5: - ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0xc0, - &adap_to_d(adap)->i2c_adap, - DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MC44S803: - ret = dvb_attach(mc44s803_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &af9015_mc44s803_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_MXL5007T: - ret = dvb_attach(mxl5007t_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0; - break; - case AF9013_TUNER_UNKNOWN: - default: - ret = -ENODEV; - err("Unknown tuner id:%d", - state->af9013_config[adap->id].tuner); - } - - if (adap->fe[0]->ops.tuner_ops.init) { - state->tuner_init[adap->id] = - adap->fe[0]->ops.tuner_ops.init; - adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init; - } - - if (adap->fe[0]->ops.tuner_ops.sleep) { - state->tuner_sleep[adap->id] = - adap->fe[0]->ops.tuner_ops.sleep; - adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep; - } - - return ret; -} - -static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - int ret; - deb_info("%s: onoff:%d\n", __func__, onoff); - - if (onoff) - ret = af9015_set_reg_bit(adap_to_d(adap), 0xd503, 0); - else - ret = af9015_clear_reg_bit(adap_to_d(adap), 0xd503, 0); - - return ret; -} - -static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, - int onoff) -{ - int ret; - u8 idx; - - deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", - __func__, index, pid, onoff); - - ret = af9015_write_reg(adap_to_d(adap), 0xd505, (pid & 0xff)); - if (ret) - goto error; - - ret = af9015_write_reg(adap_to_d(adap), 0xd506, (pid >> 8)); - if (ret) - goto error; - - idx = ((index & 0x1f) | (1 << 5)); - ret = af9015_write_reg(adap_to_d(adap), 0xd504, idx); - -error: - return ret; -} - -static int af9015_init_endpoint(struct dvb_usb_device *d) -{ - struct af9015_state *state = d_to_priv(d); - int ret; - u16 frame_size; - u8 packet_size; - deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); - - if (d->udev->speed == USB_SPEED_FULL) { - frame_size = TS_USB11_FRAME_SIZE/4; - packet_size = TS_USB11_MAX_PACKET_SIZE/4; - } else { - frame_size = TS_USB20_FRAME_SIZE/4; - packet_size = TS_USB20_MAX_PACKET_SIZE/4; - } - - ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ - if (ret) - goto error; - ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ - if (ret) - goto error; - ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ - if (ret) - goto error; - if (state->dual_mode) { - ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ - if (ret) - goto error; - } - ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ - if (ret) - goto error; - if (state->dual_mode) { - ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ - if (ret) - goto error; - } - /* EP4 xfer length */ - ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); - if (ret) - goto error; - /* EP5 xfer length */ - ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ - if (ret) - goto error; - if (state->dual_mode) { - ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ - if (ret) - goto error; - } - - /* enable / disable mp2if2 */ - if (state->dual_mode) - ret = af9015_set_reg_bit(d, 0xd50b, 0); - else - ret = af9015_clear_reg_bit(d, 0xd50b, 0); - -error: - if (ret) - err("endpoint init failed:%d", ret); - return ret; -} - -static int af9015_init(struct dvb_usb_device *d) -{ - struct af9015_state *state = d_to_priv(d); - int ret; - deb_info("%s:\n", __func__); - - mutex_init(&state->fe_mutex); - - /* init RC canary */ - ret = af9015_write_reg(d, 0x98e9, 0xff); - if (ret) - goto error; - - ret = af9015_init_endpoint(d); - if (ret) - goto error; - -error: - return ret; -} - -struct af9015_rc_setup { - unsigned int id; - char *rc_codes; -}; - -static char *af9015_rc_setup_match(unsigned int id, - const struct af9015_rc_setup *table) -{ - for (; table->rc_codes; table++) - if (table->id == id) - return table->rc_codes; - return NULL; -} - -static const struct af9015_rc_setup af9015_rc_setup_modparam[] = { - { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M }, - { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II }, - { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND }, - { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE }, - { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS }, - { } -}; - -static const struct af9015_rc_setup af9015_rc_setup_hashes[] = { - { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II }, - { 0xa3703d00, RC_MAP_ALINK_DTU_M }, - { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */ - { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */ - { } -}; - -static int af9015_rc_query(struct dvb_usb_device *d) -{ - struct af9015_state *state = d_to_priv(d); - int ret; - u8 buf[17]; - - deb_info("%s:\n", __func__); - - /* read registers needed to detect remote controller code */ - ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf)); - if (ret) - goto error; - - /* If any of these are non-zero, assume invalid data */ - if (buf[1] || buf[2] || buf[3]) - return ret; - - /* Check for repeat of previous code */ - if ((state->rc_repeat != buf[6] || buf[0]) && - !memcmp(&buf[12], state->rc_last, 4)) { - deb_rc("%s: key repeated\n", __func__); - rc_keydown(d->rc_dev, state->rc_keycode, 0); - state->rc_repeat = buf[6]; - return ret; - } - - /* Only process key if canary killed */ - if (buf[16] != 0xff && buf[0] != 0x01) { - deb_rc("%s: key pressed %*ph\n", __func__, 4, buf + 12); - - /* Reset the canary */ - ret = af9015_write_reg(d, 0x98e9, 0xff); - if (ret) - goto error; - - /* Remember this key */ - memcpy(state->rc_last, &buf[12], 4); - if (buf[14] == (u8) ~buf[15]) { - if (buf[12] == (u8) ~buf[13]) { - /* NEC */ - state->rc_keycode = buf[12] << 8 | buf[14]; - } else { - /* NEC extended*/ - state->rc_keycode = buf[12] << 16 | - buf[13] << 8 | buf[14]; - } - } else { - /* 32 bit NEC */ - state->rc_keycode = buf[12] << 24 | buf[13] << 16 | - buf[14] << 8 | buf[15]; - } - rc_keydown(d->rc_dev, state->rc_keycode, 0); - } else { - deb_rc("%s: no key press\n", __func__); - /* Invalidate last keypress */ - /* Not really needed, but helps with debug */ - state->rc_last[2] = state->rc_last[3]; - } - - state->rc_repeat = buf[6]; - state->rc_failed = false; - -error: - if (ret) { - err("%s: failed:%d", __func__, ret); - - /* allow random errors as dvb-usb will stop polling on error */ - if (!state->rc_failed) - ret = 0; - - state->rc_failed = true; - } - - return ret; -} - -static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) -{ - struct af9015_state *state = d_to_priv(d); - u16 vid = le16_to_cpu(d->udev->descriptor.idVendor); - - if (state->ir_mode == AF9015_IR_MODE_DISABLED) - return 0; - - /* try to load remote based module param */ - if (!rc->map_name) - rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote, - af9015_rc_setup_modparam); - - /* try to load remote based eeprom hash */ - if (!rc->map_name) - rc->map_name = af9015_rc_setup_match(state->eeprom_sum, - af9015_rc_setup_hashes); - - /* try to load remote based USB iManufacturer string */ - if (!rc->map_name && vid == USB_VID_AFATECH) { - /* Check USB manufacturer and product strings and try - to determine correct remote in case of chip vendor - reference IDs are used. - DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */ - char manufacturer[10]; - memset(manufacturer, 0, sizeof(manufacturer)); - usb_string(d->udev, d->udev->descriptor.iManufacturer, - manufacturer, sizeof(manufacturer)); - if (!strcmp("MSI", manufacturer)) { - /* iManufacturer 1 MSI - iProduct 2 MSI K-VOX */ - rc->map_name = af9015_rc_setup_match( - AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, - af9015_rc_setup_modparam); - } - } - - /* load empty to enable rc */ - if (!rc->map_name) - rc->map_name = RC_MAP_EMPTY; - - rc->allowed_protos = RC_TYPE_NEC; - rc->query = af9015_rc_query; - rc->interval = 500; - - return 0; -} - -/* interface 0 is used by DVB-T receiver and - interface 1 is for remote controller (HID) */ -static struct dvb_usb_device_properties af9015_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct af9015_state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .identify_state = af9015_identify_state, - .firmware = "dvb-usb-af9015.fw", - .download_firmware = af9015_download_firmware, - - .i2c_algo = &af9015_i2c_algo, - .read_config = af9015_read_config, - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .init = af9015_init, - .get_rc_config = af9015_get_rc_config, - .get_stream_config = af9015_get_stream_config, - - .get_adapter_count = af9015_get_adapter_count, - .adapter = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = af9015_pid_filter, - .pid_filter_ctrl = af9015_pid_filter_ctrl, - - .stream = DVB_USB_STREAM_BULK(0x84, 8, TS_USB20_FRAME_SIZE), - }, { - .stream = DVB_USB_STREAM_BULK(0x85, 8, TS_USB20_FRAME_SIZE), - }, - }, -}; - -static const struct usb_device_id af9015_id_table[] = { - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015, - &af9015_props, "Afatech AF9015 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016, - &af9015_props, "Afatech AF9015 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD, - &af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) }, - { DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E, - &af9015_props, "Pinnacle PCTV 71e", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U, - &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, - { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN, - &af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) }, - { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700, - &af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) }, - { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2, - &af9015_props, "TerraTec Cinergy T USB XE", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T, - &af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X, - &af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) }, - { DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380, - &af9015_props, "Xtensions XD-380", NULL) }, - { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO, - &af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2, - &af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) }, - { DVB_USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2, - &af9015_props, "Telestar Starstick 2", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309, - &af9015_props, "AVerMedia A309", NULL) }, - { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III, - &af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U, - &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2, - &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3, - &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT, - &af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850, - &af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805, - &af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU, - &af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810, - &af9015_props, "KWorld Digial MC-810", NULL) }, - { DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03, - &af9015_props, "Genius TVGo DVB-T03", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2, - &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T, - &af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20, - &af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2, - &af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) }, - { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS, - &af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T, - &af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4, - &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M, - &af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) }, - { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC, - &af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) }, - { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC, - &af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T, - &af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) }, - { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3, - &af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22, - &af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) }, - { } -}; -MODULE_DEVICE_TABLE(usb, af9015_id_table); - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver af9015_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = af9015_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(af9015_usb_driver); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Afatech AF9015 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/af9015.h b/drivers/media/dvb/dvb-usb-v2/af9015.h deleted file mode 100644 index c6b304d962ad..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/af9015.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver - * - * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> - * - * Thanks to Afatech who kindly provided information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef AF9015_H -#define AF9015_H - -#include <linux/hash.h> -#include "dvb_usb.h" -#include "af9013.h" -#include "dvb-pll.h" -#include "mt2060.h" -#include "qt1010.h" -#include "tda18271.h" -#include "mxl5005s.h" -#include "mc44s803.h" -#include "tda18218.h" -#include "mxl5007t.h" - -#define DVB_USB_LOG_PREFIX "af9015" - -#ifdef CONFIG_DVB_USB_DEBUG -#define dprintk(var, level, args...) \ - do { if ((var & level)) printk(args); } while (0) -#define DVB_USB_DEBUG_STATUS -#else -#define dprintk(args...) -#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" -#endif - -#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) -#define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) - -#undef err -#define err(format, arg...) \ - printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) -#undef warn -#define warn(format, arg...) \ - printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) - -/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0. - We use smaller - about 1/4 from the original, 5 and 87. */ -#define TS_PACKET_SIZE 188 - -#define TS_USB20_PACKET_COUNT 87 -#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) - -#define TS_USB11_PACKET_COUNT 5 -#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) - -#define TS_USB20_MAX_PACKET_SIZE 512 -#define TS_USB11_MAX_PACKET_SIZE 64 - -#define AF9015_I2C_EEPROM 0xa0 -#define AF9015_I2C_DEMOD 0x38 -#define AF9015_USB_TIMEOUT 2000 - -/* EEPROM locations */ -#define AF9015_EEPROM_IR_MODE 0x18 -#define AF9015_EEPROM_IR_REMOTE_TYPE 0x34 -#define AF9015_EEPROM_TS_MODE 0x31 -#define AF9015_EEPROM_DEMOD2_I2C 0x32 - -#define AF9015_EEPROM_SAW_BW1 0x35 -#define AF9015_EEPROM_XTAL_TYPE1 0x36 -#define AF9015_EEPROM_SPEC_INV1 0x37 -#define AF9015_EEPROM_IF1L 0x38 -#define AF9015_EEPROM_IF1H 0x39 -#define AF9015_EEPROM_MT2060_IF1L 0x3a -#define AF9015_EEPROM_MT2060_IF1H 0x3b -#define AF9015_EEPROM_TUNER_ID1 0x3c - -#define AF9015_EEPROM_SAW_BW2 0x45 -#define AF9015_EEPROM_XTAL_TYPE2 0x46 -#define AF9015_EEPROM_SPEC_INV2 0x47 -#define AF9015_EEPROM_IF2L 0x48 -#define AF9015_EEPROM_IF2H 0x49 -#define AF9015_EEPROM_MT2060_IF2L 0x4a -#define AF9015_EEPROM_MT2060_IF2H 0x4b -#define AF9015_EEPROM_TUNER_ID2 0x4c - -#define AF9015_EEPROM_OFFSET (AF9015_EEPROM_SAW_BW2 - AF9015_EEPROM_SAW_BW1) - -struct req_t { - u8 cmd; /* [0] */ - /* seq */ /* [1] */ - u8 i2c_addr; /* [2] */ - u16 addr; /* [3|4] */ - u8 mbox; /* [5] */ - u8 addr_len; /* [6] */ - u8 data_len; /* [7] */ - u8 *data; -}; - -enum af9015_cmd { - GET_CONFIG = 0x10, - DOWNLOAD_FIRMWARE = 0x11, - BOOT = 0x13, - READ_MEMORY = 0x20, - WRITE_MEMORY = 0x21, - READ_WRITE_I2C = 0x22, - COPY_FIRMWARE = 0x23, - RECONNECT_USB = 0x5a, - WRITE_VIRTUAL_MEMORY = 0x26, - GET_IR_CODE = 0x27, - READ_I2C, - WRITE_I2C, -}; - -enum af9015_ir_mode { - AF9015_IR_MODE_DISABLED = 0, - AF9015_IR_MODE_HID, - AF9015_IR_MODE_RLC, - AF9015_IR_MODE_RC6, - AF9015_IR_MODE_POLLING, /* just guess */ -}; - -struct af9015_state { - u8 ir_mode; - u8 rc_repeat; - u32 rc_keycode; - u8 rc_last[4]; - bool rc_failed; - u8 dual_mode; - u8 seq; /* packet sequence number */ - u16 mt2060_if1[2]; - u16 firmware_size; - u16 firmware_checksum; - u32 eeprom_sum; - struct af9013_config af9013_config[2]; - - /* for demod callback override */ - int (*set_frontend[2]) (struct dvb_frontend *fe); - int (*read_status[2]) (struct dvb_frontend *fe, fe_status_t *status); - int (*init[2]) (struct dvb_frontend *fe); - int (*sleep[2]) (struct dvb_frontend *fe); - int (*tuner_init[2]) (struct dvb_frontend *fe); - int (*tuner_sleep[2]) (struct dvb_frontend *fe); - struct mutex fe_mutex; -}; - -enum af9015_remote { - AF9015_REMOTE_NONE = 0, -/* 1 */ AF9015_REMOTE_A_LINK_DTU_M, - AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, - AF9015_REMOTE_MYGICTV_U718, - AF9015_REMOTE_DIGITTRADE_DVB_T, -/* 5 */ AF9015_REMOTE_AVERMEDIA_KS, -}; - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/af9035.c b/drivers/media/dvb/dvb-usb-v2/af9035.c deleted file mode 100644 index bb90b877d07b..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/af9035.c +++ /dev/null @@ -1,1086 +0,0 @@ -/* - * Afatech AF9035 DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include "af9035.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static u16 af9035_checksum(const u8 *buf, size_t len) -{ - size_t i; - u16 checksum = 0; - - for (i = 1; i < len; i++) { - if (i % 2) - checksum += buf[i] << 8; - else - checksum += buf[i]; - } - checksum = ~checksum; - - return checksum; -} - -static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) -{ -#define BUF_LEN 64 -#define REQ_HDR_LEN 4 /* send header size */ -#define ACK_HDR_LEN 3 /* rece header size */ -#define CHECKSUM_LEN 2 -#define USB_TIMEOUT 2000 - struct state *state = d_to_priv(d); - int ret, wlen, rlen; - u8 buf[BUF_LEN]; - u16 checksum, tmp_checksum; - - /* buffer overflow check */ - if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || - req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { - pr_debug("%s: too much data wlen=%d rlen=%d\n", __func__, - req->wlen, req->rlen); - return -EINVAL; - } - - buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1; - buf[1] = req->mbox; - buf[2] = req->cmd; - buf[3] = state->seq++; - memcpy(&buf[REQ_HDR_LEN], req->wbuf, req->wlen); - - wlen = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN; - rlen = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN; - - /* calc and add checksum */ - checksum = af9035_checksum(buf, buf[0] - 1); - buf[buf[0] - 1] = (checksum >> 8); - buf[buf[0] - 0] = (checksum & 0xff); - - /* no ack for these packets */ - if (req->cmd == CMD_FW_DL) - rlen = 0; - - ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen); - if (ret) - goto err; - - /* no ack for those packets */ - if (req->cmd == CMD_FW_DL) - goto exit; - - /* verify checksum */ - checksum = af9035_checksum(buf, rlen - 2); - tmp_checksum = (buf[rlen - 2] << 8) | buf[rlen - 1]; - if (tmp_checksum != checksum) { - pr_err("%s: command=%02x checksum mismatch (%04x != %04x)\n", - KBUILD_MODNAME, req->cmd, tmp_checksum, - checksum); - ret = -EIO; - goto err; - } - - /* check status */ - if (buf[2]) { - pr_debug("%s: command=%02x failed fw error=%d\n", __func__, - req->cmd, buf[2]); - ret = -EIO; - goto err; - } - - /* read request, copy returned data to return buf */ - if (req->rlen) - memcpy(req->rbuf, &buf[ACK_HDR_LEN], req->rlen); - -exit: - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -/* write multiple registers */ -static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) -{ - u8 wbuf[6 + len]; - u8 mbox = (reg >> 16) & 0xff; - struct usb_req req = { CMD_MEM_WR, mbox, sizeof(wbuf), wbuf, 0, NULL }; - - wbuf[0] = len; - wbuf[1] = 2; - wbuf[2] = 0; - wbuf[3] = 0; - wbuf[4] = (reg >> 8) & 0xff; - wbuf[5] = (reg >> 0) & 0xff; - memcpy(&wbuf[6], val, len); - - return af9035_ctrl_msg(d, &req); -} - -/* read multiple registers */ -static int af9035_rd_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) -{ - u8 wbuf[] = { len, 2, 0, 0, (reg >> 8) & 0xff, reg & 0xff }; - u8 mbox = (reg >> 16) & 0xff; - struct usb_req req = { CMD_MEM_RD, mbox, sizeof(wbuf), wbuf, len, val }; - - return af9035_ctrl_msg(d, &req); -} - -/* write single register */ -static int af9035_wr_reg(struct dvb_usb_device *d, u32 reg, u8 val) -{ - return af9035_wr_regs(d, reg, &val, 1); -} - -/* read single register */ -static int af9035_rd_reg(struct dvb_usb_device *d, u32 reg, u8 *val) -{ - return af9035_rd_regs(d, reg, val, 1); -} - -/* write single register with mask */ -static int af9035_wr_reg_mask(struct dvb_usb_device *d, u32 reg, u8 val, - u8 mask) -{ - int ret; - u8 tmp; - - /* no need for read if whole reg is written */ - if (mask != 0xff) { - ret = af9035_rd_regs(d, reg, &tmp, 1); - if (ret) - return ret; - - val &= mask; - tmp &= ~mask; - val |= tmp; - } - - return af9035_wr_regs(d, reg, &val, 1); -} - -static int af9035_i2c_master_xfer(struct i2c_adapter *adap, - struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct state *state = d_to_priv(d); - int ret; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - /* - * I2C sub header is 5 bytes long. Meaning of those bytes are: - * 0: data len - * 1: I2C addr << 1 - * 2: reg addr len - * byte 3 and 4 can be used as reg addr - * 3: reg addr MSB - * used when reg addr len is set to 2 - * 4: reg addr LSB - * used when reg addr len is set to 1 or 2 - * - * For the simplify we do not use register addr at all. - * NOTE: As a firmware knows tuner type there is very small possibility - * there could be some tuner I2C hacks done by firmware and this may - * lead problems if firmware expects those bytes are used. - */ - if (num == 2 && !(msg[0].flags & I2C_M_RD) && - (msg[1].flags & I2C_M_RD)) { - if (msg[0].len > 40 || msg[1].len > 40) { - /* TODO: correct limits > 40 */ - ret = -EOPNOTSUPP; - } else if (msg[0].addr == state->af9033_config[0].i2c_addr) { - /* integrated demod */ - u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | - msg[0].buf[2]; - ret = af9035_rd_regs(d, reg, &msg[1].buf[0], - msg[1].len); - } else { - /* I2C */ - u8 buf[5 + msg[0].len]; - struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), - buf, msg[1].len, msg[1].buf }; - buf[0] = msg[1].len; - buf[1] = msg[0].addr << 1; - buf[2] = 0x00; /* reg addr len */ - buf[3] = 0x00; /* reg addr MSB */ - buf[4] = 0x00; /* reg addr LSB */ - memcpy(&buf[5], msg[0].buf, msg[0].len); - ret = af9035_ctrl_msg(d, &req); - } - } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { - if (msg[0].len > 40) { - /* TODO: correct limits > 40 */ - ret = -EOPNOTSUPP; - } else if (msg[0].addr == state->af9033_config[0].i2c_addr) { - /* integrated demod */ - u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | - msg[0].buf[2]; - ret = af9035_wr_regs(d, reg, &msg[0].buf[3], - msg[0].len - 3); - } else { - /* I2C */ - u8 buf[5 + msg[0].len]; - struct usb_req req = { CMD_I2C_WR, 0, sizeof(buf), buf, - 0, NULL }; - buf[0] = msg[0].len; - buf[1] = msg[0].addr << 1; - buf[2] = 0x00; /* reg addr len */ - buf[3] = 0x00; /* reg addr MSB */ - buf[4] = 0x00; /* reg addr LSB */ - memcpy(&buf[5], msg[0].buf, msg[0].len); - ret = af9035_ctrl_msg(d, &req); - } - } else { - /* - * We support only two kind of I2C transactions: - * 1) 1 x read + 1 x write - * 2) 1 x write - */ - ret = -EOPNOTSUPP; - } - - mutex_unlock(&d->i2c_mutex); - - if (ret < 0) - return ret; - else - return num; -} - -static u32 af9035_i2c_functionality(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm af9035_i2c_algo = { - .master_xfer = af9035_i2c_master_xfer, - .functionality = af9035_i2c_functionality, -}; - -static int af9035_identify_state(struct dvb_usb_device *d, const char **name) -{ - int ret; - u8 wbuf[1] = { 1 }; - u8 rbuf[4]; - struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf, - sizeof(rbuf), rbuf }; - - ret = af9035_ctrl_msg(d, &req); - if (ret < 0) - goto err; - - pr_debug("%s: reply=%*ph\n", __func__, 4, rbuf); - if (rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3]) - ret = WARM; - else - ret = COLD; - - return ret; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_download_firmware(struct dvb_usb_device *d, - const struct firmware *fw) -{ - int ret, i, j, len; - u8 wbuf[1]; - u8 rbuf[4]; - struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; - struct usb_req req_fw_dl = { CMD_FW_DL, 0, 0, wbuf, 0, NULL }; - struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ; - u8 hdr_core; - u16 hdr_addr, hdr_data_len, hdr_checksum; - #define MAX_DATA 58 - #define HDR_SIZE 7 - - /* - * Thanks to Daniel Glöckner <daniel-gl@gmx.net> about that info! - * - * byte 0: MCS 51 core - * There are two inside the AF9035 (1=Link and 2=OFDM) with separate - * address spaces - * byte 1-2: Big endian destination address - * byte 3-4: Big endian number of data bytes following the header - * byte 5-6: Big endian header checksum, apparently ignored by the chip - * Calculated as ~(h[0]*256+h[1]+h[2]*256+h[3]+h[4]*256) - */ - - for (i = fw->size; i > HDR_SIZE;) { - hdr_core = fw->data[fw->size - i + 0]; - hdr_addr = fw->data[fw->size - i + 1] << 8; - hdr_addr |= fw->data[fw->size - i + 2] << 0; - hdr_data_len = fw->data[fw->size - i + 3] << 8; - hdr_data_len |= fw->data[fw->size - i + 4] << 0; - hdr_checksum = fw->data[fw->size - i + 5] << 8; - hdr_checksum |= fw->data[fw->size - i + 6] << 0; - - pr_debug("%s: core=%d addr=%04x data_len=%d checksum=%04x\n", - __func__, hdr_core, hdr_addr, hdr_data_len, - hdr_checksum); - - if (((hdr_core != 1) && (hdr_core != 2)) || - (hdr_data_len > i)) { - pr_debug("%s: bad firmware\n", __func__); - break; - } - - /* download begin packet */ - req.cmd = CMD_FW_DL_BEGIN; - ret = af9035_ctrl_msg(d, &req); - if (ret < 0) - goto err; - - /* download firmware packet(s) */ - for (j = HDR_SIZE + hdr_data_len; j > 0; j -= MAX_DATA) { - len = j; - if (len > MAX_DATA) - len = MAX_DATA; - req_fw_dl.wlen = len; - req_fw_dl.wbuf = (u8 *) &fw->data[fw->size - i + - HDR_SIZE + hdr_data_len - j]; - ret = af9035_ctrl_msg(d, &req_fw_dl); - if (ret < 0) - goto err; - } - - /* download end packet */ - req.cmd = CMD_FW_DL_END; - ret = af9035_ctrl_msg(d, &req); - if (ret < 0) - goto err; - - i -= hdr_data_len + HDR_SIZE; - - pr_debug("%s: data uploaded=%zu\n", __func__, fw->size - i); - } - - /* firmware loaded, request boot */ - req.cmd = CMD_FW_BOOT; - ret = af9035_ctrl_msg(d, &req); - if (ret < 0) - goto err; - - /* ensure firmware starts */ - wbuf[0] = 1; - ret = af9035_ctrl_msg(d, &req_fw_ver); - if (ret < 0) - goto err; - - if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { - pr_err("%s: firmware did not run\n", KBUILD_MODNAME); - ret = -ENODEV; - goto err; - } - - pr_info("%s: firmware version=%d.%d.%d.%d", KBUILD_MODNAME, - rbuf[0], rbuf[1], rbuf[2], rbuf[3]); - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_download_firmware_it9135(struct dvb_usb_device *d, - const struct firmware *fw) -{ - int ret, i, i_prev; - u8 wbuf[1]; - u8 rbuf[4]; - struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; - struct usb_req req_fw_dl = { CMD_FW_SCATTER_WR, 0, 0, NULL, 0, NULL }; - struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf } ; - #define HDR_SIZE 7 - - /* - * There seems to be following firmware header. Meaning of bytes 0-3 - * is unknown. - * - * 0: 3 - * 1: 0, 1 - * 2: 0 - * 3: 1, 2, 3 - * 4: addr MSB - * 5: addr LSB - * 6: count of data bytes ? - */ - - for (i = HDR_SIZE, i_prev = 0; i <= fw->size; i++) { - if (i == fw->size || - (fw->data[i + 0] == 0x03 && - (fw->data[i + 1] == 0x00 || - fw->data[i + 1] == 0x01) && - fw->data[i + 2] == 0x00)) { - req_fw_dl.wlen = i - i_prev; - req_fw_dl.wbuf = (u8 *) &fw->data[i_prev]; - i_prev = i; - ret = af9035_ctrl_msg(d, &req_fw_dl); - if (ret < 0) - goto err; - - pr_debug("%s: data uploaded=%d\n", __func__, i); - } - } - - /* firmware loaded, request boot */ - req.cmd = CMD_FW_BOOT; - ret = af9035_ctrl_msg(d, &req); - if (ret < 0) - goto err; - - /* ensure firmware starts */ - wbuf[0] = 1; - ret = af9035_ctrl_msg(d, &req_fw_ver); - if (ret < 0) - goto err; - - if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { - pr_err("%s: firmware did not run\n", KBUILD_MODNAME); - ret = -ENODEV; - goto err; - } - - pr_info("%s: firmware version=%d.%d.%d.%d", KBUILD_MODNAME, - rbuf[0], rbuf[1], rbuf[2], rbuf[3]); - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_read_config(struct dvb_usb_device *d) -{ - struct state *state = d_to_priv(d); - int ret, i, eeprom_shift = 0; - u8 tmp; - u16 tmp16; - - /* check if there is dual tuners */ - ret = af9035_rd_reg(d, EEPROM_DUAL_MODE, &tmp); - if (ret < 0) - goto err; - - state->dual_mode = tmp; - pr_debug("%s: dual mode=%d\n", __func__, state->dual_mode); - - for (i = 0; i < state->dual_mode + 1; i++) { - /* tuner */ - ret = af9035_rd_reg(d, EEPROM_1_TUNER_ID + eeprom_shift, &tmp); - if (ret < 0) - goto err; - - state->af9033_config[i].tuner = tmp; - pr_debug("%s: [%d]tuner=%02x\n", __func__, i, tmp); - - switch (tmp) { - case AF9033_TUNER_TUA9001: - case AF9033_TUNER_FC0011: - case AF9033_TUNER_MXL5007T: - case AF9033_TUNER_TDA18218: - state->af9033_config[i].spec_inv = 1; - break; - default: - pr_info("%s: tuner ID=%02x not supported, please " \ - "report!", KBUILD_MODNAME, tmp); - }; - - /* tuner IF frequency */ - ret = af9035_rd_reg(d, EEPROM_1_IFFREQ_L + eeprom_shift, &tmp); - if (ret < 0) - goto err; - - tmp16 = tmp; - - ret = af9035_rd_reg(d, EEPROM_1_IFFREQ_H + eeprom_shift, &tmp); - if (ret < 0) - goto err; - - tmp16 |= tmp << 8; - - pr_debug("%s: [%d]IF=%d\n", __func__, i, tmp16); - - eeprom_shift = 0x10; /* shift for the 2nd tuner params */ - } - - /* get demod clock */ - ret = af9035_rd_reg(d, 0x00d800, &tmp); - if (ret < 0) - goto err; - - tmp = (tmp >> 0) & 0x0f; - - for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) - state->af9033_config[i].clock = clock_lut[tmp]; - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_read_config_it9135(struct dvb_usb_device *d) -{ - struct state *state = d_to_priv(d); - int ret, i; - u8 tmp; - - state->dual_mode = false; - - /* get demod clock */ - ret = af9035_rd_reg(d, 0x00d800, &tmp); - if (ret < 0) - goto err; - - tmp = (tmp >> 0) & 0x0f; - - for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) - state->af9033_config[i].clock = clock_lut_it9135[tmp]; - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d, - int cmd, int arg) -{ - int ret; - - switch (cmd) { - case FC0011_FE_CALLBACK_POWER: - /* Tuner enable */ - ret = af9035_wr_reg_mask(d, 0xd8eb, 1, 1); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0xd8ec, 1, 1); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0xd8ed, 1, 1); - if (ret < 0) - goto err; - - /* LED */ - ret = af9035_wr_reg_mask(d, 0xd8d0, 1, 1); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0xd8d1, 1, 1); - if (ret < 0) - goto err; - - usleep_range(10000, 50000); - break; - case FC0011_FE_CALLBACK_RESET: - ret = af9035_wr_reg(d, 0xd8e9, 1); - if (ret < 0) - goto err; - - ret = af9035_wr_reg(d, 0xd8e8, 1); - if (ret < 0) - goto err; - - ret = af9035_wr_reg(d, 0xd8e7, 1); - if (ret < 0) - goto err; - - usleep_range(10000, 20000); - - ret = af9035_wr_reg(d, 0xd8e7, 0); - if (ret < 0) - goto err; - - usleep_range(10000, 20000); - break; - default: - ret = -EINVAL; - goto err; - } - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) -{ - struct state *state = d_to_priv(d); - - switch (state->af9033_config[0].tuner) { - case AF9033_TUNER_FC0011: - return af9035_fc0011_tuner_callback(d, cmd, arg); - default: - break; - } - - return -ENODEV; -} - -static int af9035_frontend_callback(void *adapter_priv, int component, - int cmd, int arg) -{ - struct i2c_adapter *adap = adapter_priv; - struct dvb_usb_device *d = i2c_get_adapdata(adap); - - switch (component) { - case DVB_FRONTEND_COMPONENT_TUNER: - return af9035_tuner_callback(d, cmd, arg); - default: - break; - } - - return -EINVAL; -} - -static int af9035_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct state *state = adap_to_priv(adap); - struct dvb_usb_device *d = adap_to_d(adap); - int ret; - - if (!state->af9033_config[adap->id].tuner) { - /* unsupported tuner */ - ret = -ENODEV; - goto err; - } - - if (adap->id == 0) { - state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; - state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL; - - ret = af9035_wr_reg(d, 0x00417f, - state->af9033_config[1].i2c_addr); - if (ret < 0) - goto err; - - ret = af9035_wr_reg(d, 0x00d81a, - state->dual_mode); - if (ret < 0) - goto err; - } - - /* attach demodulator */ - adap->fe[0] = dvb_attach(af9033_attach, - &state->af9033_config[adap->id], &d->i2c_adap); - if (adap->fe[0] == NULL) { - ret = -ENODEV; - goto err; - } - - /* disable I2C-gate */ - adap->fe[0]->ops.i2c_gate_ctrl = NULL; - adap->fe[0]->callback = af9035_frontend_callback; - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static struct tua9001_config af9035_tua9001_config = { - .i2c_addr = 0x60, -}; - -static const struct fc0011_config af9035_fc0011_config = { - .i2c_address = 0x60, -}; - -static struct mxl5007t_config af9035_mxl5007t_config = { - .xtal_freq_hz = MxL_XTAL_24_MHZ, - .if_freq_hz = MxL_IF_4_57_MHZ, - .invert_if = 0, - .loop_thru_enable = 0, - .clk_out_enable = 0, - .clk_out_amp = MxL_CLKOUT_AMP_0_94V, -}; - -static struct tda18218_config af9035_tda18218_config = { - .i2c_address = 0x60, - .i2c_wr_max = 21, -}; - -static int af9035_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct state *state = adap_to_priv(adap); - struct dvb_usb_device *d = adap_to_d(adap); - int ret; - struct dvb_frontend *fe; - - switch (state->af9033_config[adap->id].tuner) { - case AF9033_TUNER_TUA9001: - /* AF9035 gpiot3 = TUA9001 RESETN - AF9035 gpiot2 = TUA9001 RXEN */ - - /* configure gpiot2 and gpiot2 as output */ - ret = af9035_wr_reg_mask(d, 0x00d8ec, 0x01, 0x01); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0x00d8ed, 0x01, 0x01); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0x00d8e8, 0x01, 0x01); - if (ret < 0) - goto err; - - ret = af9035_wr_reg_mask(d, 0x00d8e9, 0x01, 0x01); - if (ret < 0) - goto err; - - /* reset tuner */ - ret = af9035_wr_reg_mask(d, 0x00d8e7, 0x00, 0x01); - if (ret < 0) - goto err; - - usleep_range(2000, 20000); - - ret = af9035_wr_reg_mask(d, 0x00d8e7, 0x01, 0x01); - if (ret < 0) - goto err; - - /* activate tuner RX */ - /* TODO: use callback for TUA9001 RXEN */ - ret = af9035_wr_reg_mask(d, 0x00d8eb, 0x01, 0x01); - if (ret < 0) - goto err; - - /* attach tuner */ - fe = dvb_attach(tua9001_attach, adap->fe[0], - &d->i2c_adap, &af9035_tua9001_config); - break; - case AF9033_TUNER_FC0011: - fe = dvb_attach(fc0011_attach, adap->fe[0], - &d->i2c_adap, &af9035_fc0011_config); - break; - case AF9033_TUNER_MXL5007T: - ret = af9035_wr_reg(d, 0x00d8e0, 1); - if (ret < 0) - goto err; - ret = af9035_wr_reg(d, 0x00d8e1, 1); - if (ret < 0) - goto err; - ret = af9035_wr_reg(d, 0x00d8df, 0); - if (ret < 0) - goto err; - - msleep(30); - - ret = af9035_wr_reg(d, 0x00d8df, 1); - if (ret < 0) - goto err; - - msleep(300); - - ret = af9035_wr_reg(d, 0x00d8c0, 1); - if (ret < 0) - goto err; - ret = af9035_wr_reg(d, 0x00d8c1, 1); - if (ret < 0) - goto err; - ret = af9035_wr_reg(d, 0x00d8bf, 0); - if (ret < 0) - goto err; - ret = af9035_wr_reg(d, 0x00d8b4, 1); - if (ret < 0) - goto err; - ret = af9035_wr_reg(d, 0x00d8b5, 1); - if (ret < 0) - goto err; - ret = af9035_wr_reg(d, 0x00d8b3, 1); - if (ret < 0) - goto err; - - /* attach tuner */ - fe = dvb_attach(mxl5007t_attach, adap->fe[0], - &d->i2c_adap, 0x60, &af9035_mxl5007t_config); - break; - case AF9033_TUNER_TDA18218: - /* attach tuner */ - fe = dvb_attach(tda18218_attach, adap->fe[0], - &d->i2c_adap, &af9035_tda18218_config); - break; - default: - fe = NULL; - } - - if (fe == NULL) { - ret = -ENODEV; - goto err; - } - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_init(struct dvb_usb_device *d) -{ - struct state *state = d_to_priv(d); - int ret, i; - u16 frame_size = 87 * 188 / 4; - u8 packet_size = 512 / 4; - struct reg_val_mask tab[] = { - { 0x80f99d, 0x01, 0x01 }, - { 0x80f9a4, 0x01, 0x01 }, - { 0x00dd11, 0x00, 0x20 }, - { 0x00dd11, 0x00, 0x40 }, - { 0x00dd13, 0x00, 0x20 }, - { 0x00dd13, 0x00, 0x40 }, - { 0x00dd11, 0x20, 0x20 }, - { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, - { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, - { 0x00dd0c, packet_size, 0xff}, - { 0x00dd11, state->dual_mode << 6, 0x40 }, - { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, - { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, - { 0x00dd0d, packet_size, 0xff }, - { 0x80f9a3, 0x00, 0x01 }, - { 0x80f9cd, 0x00, 0x01 }, - { 0x80f99d, 0x00, 0x01 }, - { 0x80f9a4, 0x00, 0x01 }, - }; - - pr_debug("%s: USB speed=%d frame_size=%04x packet_size=%02x\n", - __func__, d->udev->speed, frame_size, packet_size); - - /* init endpoints */ - for (i = 0; i < ARRAY_SIZE(tab); i++) { - ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val, - tab[i].mask); - if (ret < 0) - goto err; - } - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -static int af9035_rc_query(struct dvb_usb_device *d) -{ - unsigned int key; - unsigned char b[4]; - int ret; - struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, b }; - - ret = af9035_ctrl_msg(d, &req); - if (ret < 0) - goto err; - - if ((b[2] + b[3]) == 0xff) { - if ((b[0] + b[1]) == 0xff) { - /* NEC */ - key = b[0] << 8 | b[2]; - } else { - /* ext. NEC */ - key = b[0] << 16 | b[1] << 8 | b[2]; - } - } else { - key = b[0] << 24 | b[1] << 16 | b[2] << 8 | b[3]; - } - - rc_keydown(d->rc_dev, key, 0); - -err: - /* ignore errors */ - return 0; -} - -static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) -{ - int ret; - u8 tmp; - - ret = af9035_rd_reg(d, EEPROM_IR_MODE, &tmp); - if (ret < 0) - goto err; - - pr_debug("%s: ir_mode=%02x\n", __func__, tmp); - - /* don't activate rc if in HID mode or if not available */ - if (tmp == 5) { - ret = af9035_rd_reg(d, EEPROM_IR_TYPE, &tmp); - if (ret < 0) - goto err; - - pr_debug("%s: ir_type=%02x\n", __func__, tmp); - - switch (tmp) { - case 0: /* NEC */ - default: - rc->allowed_protos = RC_TYPE_NEC; - break; - case 1: /* RC6 */ - rc->allowed_protos = RC_TYPE_RC6; - break; - } - - rc->query = af9035_rc_query; - rc->interval = 500; - - /* load empty to enable rc */ - if (!rc->map_name) - rc->map_name = RC_MAP_EMPTY; - } - - return 0; - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - - return ret; -} - -/* interface 0 is used by DVB-T receiver and - interface 1 is for remote controller (HID) */ -static const struct dvb_usb_device_properties af9035_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .identify_state = af9035_identify_state, - .firmware = "dvb-usb-af9035-02.fw", - .download_firmware = af9035_download_firmware, - - .i2c_algo = &af9035_i2c_algo, - .read_config = af9035_read_config, - .frontend_attach = af9035_frontend_attach, - .tuner_attach = af9035_tuner_attach, - .init = af9035_init, - .get_rc_config = af9035_get_rc_config, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), - }, { - .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), - }, - }, -}; - -static const struct dvb_usb_device_properties it9135_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .identify_state = af9035_identify_state, - .firmware = "dvb-usb-it9135-01.fw", - .download_firmware = af9035_download_firmware_it9135, - - .i2c_algo = &af9035_i2c_algo, - .read_config = af9035_read_config_it9135, - .frontend_attach = af9035_frontend_attach, - .tuner_attach = af9035_tuner_attach, - .init = af9035_init, - .get_rc_config = af9035_get_rc_config, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), - }, { - .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), - }, - }, -}; - -static const struct usb_device_id af9035_id_table[] = { - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035, - &af9035_props, "Afatech AF9035 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000, - &af9035_props, "Afatech AF9035 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001, - &af9035_props, "Afatech AF9035 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002, - &af9035_props, "Afatech AF9035 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003, - &af9035_props, "Afatech AF9035 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK, - &af9035_props, "TerraTec Cinergy T Stick", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835, - &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835, - &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867, - &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867, - &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR, - &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, - { } -}; -MODULE_DEVICE_TABLE(usb, af9035_id_table); - -static struct usb_driver af9035_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = af9035_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(af9035_usb_driver); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Afatech AF9035 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/af9035.h b/drivers/media/dvb/dvb-usb-v2/af9035.h deleted file mode 100644 index 59ff69ede0f0..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/af9035.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Afatech AF9035 DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef AF9035_H -#define AF9035_H - -#include "dvb_usb.h" -#include "af9033.h" -#include "tua9001.h" -#include "fc0011.h" -#include "mxl5007t.h" -#include "tda18218.h" - -struct reg_val { - u32 reg; - u8 val; -}; - -struct reg_val_mask { - u32 reg; - u8 val; - u8 mask; -}; - -struct usb_req { - u8 cmd; - u8 mbox; - u8 wlen; - u8 *wbuf; - u8 rlen; - u8 *rbuf; -}; - -struct state { - u8 seq; /* packet sequence number */ - bool dual_mode; - - struct af9033_config af9033_config[2]; -}; - -u32 clock_lut[] = { - 20480000, /* FPGA */ - 16384000, /* 16.38 MHz */ - 20480000, /* 20.48 MHz */ - 36000000, /* 36.00 MHz */ - 30000000, /* 30.00 MHz */ - 26000000, /* 26.00 MHz */ - 28000000, /* 28.00 MHz */ - 32000000, /* 32.00 MHz */ - 34000000, /* 34.00 MHz */ - 24000000, /* 24.00 MHz */ - 22000000, /* 22.00 MHz */ - 12000000, /* 12.00 MHz */ -}; - -u32 clock_lut_it9135[] = { - 12000000, /* 12.00 MHz */ - 20480000, /* 20.48 MHz */ - 36000000, /* 36.00 MHz */ - 30000000, /* 30.00 MHz */ - 26000000, /* 26.00 MHz */ - 28000000, /* 28.00 MHz */ - 32000000, /* 32.00 MHz */ - 34000000, /* 34.00 MHz */ - 24000000, /* 24.00 MHz */ - 22000000, /* 22.00 MHz */ -}; - -/* EEPROM locations */ -#define EEPROM_IR_MODE 0x430d -#define EEPROM_DUAL_MODE 0x4326 -#define EEPROM_IR_TYPE 0x4329 -#define EEPROM_1_IFFREQ_L 0x432d -#define EEPROM_1_IFFREQ_H 0x432e -#define EEPROM_1_TUNER_ID 0x4331 -#define EEPROM_2_IFFREQ_L 0x433d -#define EEPROM_2_IFFREQ_H 0x433e -#define EEPROM_2_TUNER_ID 0x4341 - -/* USB commands */ -#define CMD_MEM_RD 0x00 -#define CMD_MEM_WR 0x01 -#define CMD_I2C_RD 0x02 -#define CMD_I2C_WR 0x03 -#define CMD_IR_GET 0x18 -#define CMD_FW_DL 0x21 -#define CMD_FW_QUERYINFO 0x22 -#define CMD_FW_BOOT 0x23 -#define CMD_FW_DL_BEGIN 0x24 -#define CMD_FW_DL_END 0x25 -#define CMD_FW_SCATTER_WR 0x29 - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/anysee.c b/drivers/media/dvb/dvb-usb-v2/anysee.c deleted file mode 100644 index fb3829a73d2d..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/anysee.c +++ /dev/null @@ -1,1324 +0,0 @@ -/* - * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver - * - * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * TODO: - * - add smart card reader support for Conditional Access (CA) - * - * Card reader in Anysee is nothing more than ISO 7816 card reader. - * There is no hardware CAM in any Anysee device sold. - * In my understanding it should be implemented by making own module - * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This - * module registers serial interface that can be used to communicate - * with any ISO 7816 smart card. - * - * Any help according to implement serial smart card reader support - * is highly welcome! - */ - -#include "anysee.h" -#include "dvb-pll.h" -#include "tda1002x.h" -#include "mt352.h" -#include "mt352_priv.h" -#include "zl10353.h" -#include "tda18212.h" -#include "cx24116.h" -#include "stv0900.h" -#include "stv6110.h" -#include "isl6423.h" -#include "cxd2820r.h" - -/* debug */ -static int dvb_usb_anysee_debug; -module_param_named(debug, dvb_usb_anysee_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static DEFINE_MUTEX(anysee_usb_mutex); - -static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, - u8 *rbuf, u8 rlen) -{ - struct anysee_state *state = d_to_priv(d); - int act_len, ret, i; - u8 buf[64]; - - memcpy(&buf[0], sbuf, slen); - buf[60] = state->seq++; - - mutex_lock(&anysee_usb_mutex); - - deb_xfer(">>> "); - debug_dump(buf, slen, deb_xfer); - - /* We need receive one message more after dvb_usb_generic_rw due - to weird transaction flow, which is 1 x send + 2 x receive. */ - ret = dvb_usbv2_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf)); - if (ret) - goto error_unlock; - - /* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32 - * (EPIPE, Broken pipe). Function supports currently msleep() as a - * parameter but I would not like to use it, since according to - * Documentation/timers/timers-howto.txt it should not be used such - * short, under < 20ms, sleeps. Repeating failed message would be - * better choice as not to add unwanted delays... - * Fixing that correctly is one of those or both; - * 1) use repeat if possible - * 2) add suitable delay - */ - - /* get answer, retry few times if error returned */ - for (i = 0; i < 3; i++) { - /* receive 2nd answer */ - ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, - d->props->generic_bulk_ctrl_endpoint), buf, sizeof(buf), - &act_len, 2000); - - if (ret) { - deb_info("%s: recv bulk message failed: %d", - __func__, ret); - } else { - deb_xfer("<<< "); - debug_dump(buf, rlen, deb_xfer); - - if (buf[63] != 0x4f) - deb_info("%s: cmd failed\n", __func__); - - break; - } - } - - if (ret) { - /* all retries failed, it is fatal */ - err("%s: recv bulk message failed: %d", __func__, ret); - goto error_unlock; - } - - /* read request, copy returned data to return buf */ - if (rbuf && rlen) - memcpy(rbuf, buf, rlen); - -error_unlock: - mutex_unlock(&anysee_usb_mutex); - - return ret; -} - -static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) -{ - u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; - int ret; - ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); - deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); - return ret; -} - -static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) -{ - u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; - deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); - return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); -} - -/* write single register with mask */ -static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, - u8 mask) -{ - int ret; - u8 tmp; - - /* no need for read if whole reg is written */ - if (mask != 0xff) { - ret = anysee_read_reg(d, reg, &tmp); - if (ret) - return ret; - - val &= mask; - tmp &= ~mask; - val |= tmp; - } - - return anysee_write_reg(d, reg, val); -} - -/* read single register with mask */ -static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val, - u8 mask) -{ - int ret, i; - u8 tmp; - - ret = anysee_read_reg(d, reg, &tmp); - if (ret) - return ret; - - tmp &= mask; - - /* find position of the first bit */ - for (i = 0; i < 8; i++) { - if ((mask >> i) & 0x01) - break; - } - *val = tmp >> i; - - return 0; -} - -static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) -{ - u8 buf[] = {CMD_GET_HW_INFO}; - return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); -} - -static int anysee_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; - deb_info("%s: onoff:%02x\n", __func__, onoff); - return anysee_ctrl_msg(fe_to_d(fe), buf, sizeof(buf), NULL, 0); -} - -static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) -{ - u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; - deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); - return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); -} - -static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) -{ - u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; - deb_info("%s: onoff:%02x\n", __func__, onoff); - return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); -} - -/* I2C */ -static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int ret = 0, inc, i = 0; - u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */ - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - while (i < num) { - if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { - if (msg[i].len > 2 || msg[i+1].len > 60) { - ret = -EOPNOTSUPP; - break; - } - buf[0] = CMD_I2C_READ; - buf[1] = (msg[i].addr << 1) | 0x01; - buf[2] = msg[i].buf[0]; - buf[3] = msg[i].buf[1]; - buf[4] = msg[i].len-1; - buf[5] = msg[i+1].len; - ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf, - msg[i+1].len); - inc = 2; - } else { - if (msg[i].len > 48) { - ret = -EOPNOTSUPP; - break; - } - buf[0] = CMD_I2C_WRITE; - buf[1] = (msg[i].addr << 1); - buf[2] = msg[i].len; - buf[3] = 0x01; - memcpy(&buf[4], msg[i].buf, msg[i].len); - ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0); - inc = 1; - } - if (ret) - break; - - i += inc; - } - - mutex_unlock(&d->i2c_mutex); - - return ret ? ret : i; -} - -static u32 anysee_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm anysee_i2c_algo = { - .master_xfer = anysee_master_xfer, - .functionality = anysee_i2c_func, -}; - -static int anysee_mt352_demod_init(struct dvb_frontend *fe) -{ - static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x28 }; - static u8 reset[] = { RESET, 0x80 }; - static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; - static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0x20 }; - static u8 gpp_ctl_cfg[] = { GPP_CTL, 0x33 }; - static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; - - mt352_write(fe, clock_config, sizeof(clock_config)); - udelay(200); - mt352_write(fe, reset, sizeof(reset)); - mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); - - mt352_write(fe, agc_cfg, sizeof(agc_cfg)); - mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); - mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); - - return 0; -} - -/* Callbacks for DVB USB */ -static struct tda10023_config anysee_tda10023_config = { - .demod_address = (0x1a >> 1), - .invert = 0, - .xtal = 16000000, - .pll_m = 11, - .pll_p = 3, - .pll_n = 1, - .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C, - .deltaf = 0xfeeb, -}; - -static struct mt352_config anysee_mt352_config = { - .demod_address = (0x1e >> 1), - .demod_init = anysee_mt352_demod_init, -}; - -static struct zl10353_config anysee_zl10353_config = { - .demod_address = (0x1e >> 1), - .parallel_ts = 1, -}; - -static struct zl10353_config anysee_zl10353_tda18212_config2 = { - .demod_address = (0x1e >> 1), - .parallel_ts = 1, - .disable_i2c_gate_ctrl = 1, - .no_tuner = 1, - .if2 = 41500, -}; - -static struct zl10353_config anysee_zl10353_tda18212_config = { - .demod_address = (0x18 >> 1), - .parallel_ts = 1, - .disable_i2c_gate_ctrl = 1, - .no_tuner = 1, - .if2 = 41500, -}; - -static struct tda10023_config anysee_tda10023_tda18212_config = { - .demod_address = (0x1a >> 1), - .xtal = 16000000, - .pll_m = 12, - .pll_p = 3, - .pll_n = 1, - .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B, - .deltaf = 0xba02, -}; - -static struct tda18212_config anysee_tda18212_config = { - .i2c_address = (0xc0 >> 1), - .if_dvbt_6 = 4150, - .if_dvbt_7 = 4150, - .if_dvbt_8 = 4150, - .if_dvbc = 5000, -}; - -static struct tda18212_config anysee_tda18212_config2 = { - .i2c_address = 0x60 /* (0xc0 >> 1) */, - .if_dvbt_6 = 3550, - .if_dvbt_7 = 3700, - .if_dvbt_8 = 4150, - .if_dvbt2_6 = 3250, - .if_dvbt2_7 = 4000, - .if_dvbt2_8 = 4000, - .if_dvbc = 5000, -}; - -static struct cx24116_config anysee_cx24116_config = { - .demod_address = (0xaa >> 1), - .mpg_clk_pos_pol = 0x00, - .i2c_wr_max = 48, -}; - -static struct stv0900_config anysee_stv0900_config = { - .demod_address = (0xd0 >> 1), - .demod_mode = 0, - .xtal = 8000000, - .clkmode = 3, - .diseqc_mode = 2, - .tun1_maddress = 0, - .tun1_adc = 1, /* 1 Vpp */ - .path1_mode = 3, -}; - -static struct stv6110_config anysee_stv6110_config = { - .i2c_address = (0xc0 >> 1), - .mclk = 16000000, - .clk_div = 1, -}; - -static struct isl6423_config anysee_isl6423_config = { - .current_max = SEC_CURRENT_800m, - .curlim = SEC_CURRENT_LIM_OFF, - .mod_extern = 1, - .addr = (0x10 >> 1), -}; - -static struct cxd2820r_config anysee_cxd2820r_config = { - .i2c_address = 0x6d, /* (0xda >> 1) */ - .ts_mode = 0x38, -}; - -/* - * New USB device strings: Mfr=1, Product=2, SerialNumber=0 - * Manufacturer: AMT.CO.KR - * - * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=???????? - * PCB: ? - * parts: DNOS404ZH102A(MT352, DTT7579(?)) - * - * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)" - * PCB: PCB 507T (rev1.61) - * parts: DNOS404ZH103A(ZL10353, DTT7579(?)) - * OEA=0a OEB=00 OEC=00 OED=ff OEE=00 - * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00 - * - * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee" - * PCB: 507CD (rev1.1) - * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01 - * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe - * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01 - * IOD[0] ZL10353 1=enabled - * IOA[7] TS 0=enabled - * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not) - * - * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)" - * PCB: 507DC (rev0.2) - * parts: TDA10023, DTOS403IH102B TM, CST56I01 - * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe - * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01 - * IOD[0] TDA10023 1=enabled - * - * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)" - * PCB: 507SI (rev2.1) - * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024 - * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe - * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01 - * IOD[0] CX24116 1=enabled - * - * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" - * PCB: 507FA (rev0.4) - * parts: TDA10023, DTOS403IH102B TM, TDA8024 - * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff - * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 - * IOD[5] TDA10023 1=enabled - * IOE[0] tuner 1=enabled - * - * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" - * PCB: 507FA (rev1.1) - * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024 - * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff - * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 - * DVB-C: - * IOD[5] TDA10023 1=enabled - * IOE[0] tuner 1=enabled - * DVB-T: - * IOD[0] ZL10353 1=enabled - * IOE[0] tuner 0=enabled - * tuner is behind ZL10353 I2C-gate - * - * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)" - * PCB: 508TC (rev0.6) - * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) - * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff - * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 - * IOA[7] TS 1=enabled - * IOE[4] TDA18212 1=enabled - * DVB-C: - * IOD[6] ZL10353 0=disabled - * IOD[5] TDA10023 1=enabled - * IOE[0] IF 1=enabled - * DVB-T: - * IOD[5] TDA10023 0=disabled - * IOD[6] ZL10353 1=enabled - * IOE[0] IF 0=enabled - * - * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)" - * PCB: 508S2 (rev0.7) - * parts: DNBU10512IST(STV0903, STV6110), ISL6423 - * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff - * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 - * IOA[7] TS 1=enabled - * IOE[5] STV0903 1=enabled - * - * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)" - * PCB: 508T2C (rev0.3) - * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024 - * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff - * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 - * IOA[7] TS 1=enabled - * IOE[5] CXD2820R 1=enabled - * - * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)" - * PCB: 508PTC (rev0.5) - * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) - * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff - * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 - * IOA[7] TS 1=enabled - * IOE[4] TDA18212 1=enabled - * DVB-C: - * IOD[6] ZL10353 0=disabled - * IOD[5] TDA10023 1=enabled - * IOE[0] IF 1=enabled - * DVB-T: - * IOD[5] TDA10023 0=disabled - * IOD[6] ZL10353 1=enabled - * IOE[0] IF 0=enabled - * - * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)" - * PCB: 508PS2 (rev0.4) - * parts: DNBU10512IST(STV0903, STV6110), ISL6423 - * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff - * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 - * IOA[7] TS 1=enabled - * IOE[5] STV0903 1=enabled - */ - -static int anysee_read_config(struct dvb_usb_device *d) -{ - struct anysee_state *state = d_to_priv(d); - int ret; - u8 hw_info[3]; - - /* - * Check which hardware we have. - * We must do this call two times to get reliable values (hw/fw bug). - */ - ret = anysee_get_hw_info(d, hw_info); - if (ret) - goto error; - - ret = anysee_get_hw_info(d, hw_info); - if (ret) - goto error; - - /* Meaning of these info bytes are guessed. */ - info("firmware version:%d.%d hardware id:%d", - hw_info[1], hw_info[2], hw_info[0]); - - state->hw = hw_info[0]; -error: - return ret; -} - -/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */ -static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - /* enable / disable tuner access on IOE[4] */ - return anysee_wr_reg_mask(fe_to_d(fe), REG_IOE, (enable << 4), 0x10); -} - -static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct anysee_state *state = fe_to_priv(fe); - struct dvb_usb_device *d = fe_to_d(fe); - int ret; - - deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); - - /* no frontend sleep control */ - if (onoff == 0) - return 0; - - switch (state->hw) { - case ANYSEE_HW_507FA: /* 15 */ - /* E30 Combo Plus */ - /* E30 C Plus */ - - if (fe->id == 0) { - /* disable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01); - if (ret) - goto error; - - /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); - if (ret) - goto error; - - /* enable DVB-C tuner on IOE[0] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01); - if (ret) - goto error; - } else { - /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); - if (ret) - goto error; - - /* enable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); - if (ret) - goto error; - - /* enable DVB-T tuner on IOE[0] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01); - if (ret) - goto error; - } - - break; - case ANYSEE_HW_508TC: /* 18 */ - case ANYSEE_HW_508PTC: /* 21 */ - /* E7 TC */ - /* E7 PTC */ - - if (fe->id == 0) { - /* disable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40); - if (ret) - goto error; - - /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); - if (ret) - goto error; - - /* enable IF route on IOE[0] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01); - if (ret) - goto error; - } else { - /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); - if (ret) - goto error; - - /* enable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40); - if (ret) - goto error; - - /* enable IF route on IOE[0] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01); - if (ret) - goto error; - } - - break; - default: - ret = 0; - } - -error: - return ret; -} - -static int anysee_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct anysee_state *state = adap_to_priv(adap); - struct dvb_usb_device *d = adap_to_d(adap); - int ret; - u8 tmp; - struct i2c_msg msg[2] = { - { - .addr = anysee_tda18212_config.i2c_address, - .flags = 0, - .len = 1, - .buf = "\x00", - }, { - .addr = anysee_tda18212_config.i2c_address, - .flags = I2C_M_RD, - .len = 1, - .buf = &tmp, - } - }; - - switch (state->hw) { - case ANYSEE_HW_507T: /* 2 */ - /* E30 */ - - /* attach demod */ - adap->fe[0] = dvb_attach(mt352_attach, &anysee_mt352_config, - &d->i2c_adap); - if (adap->fe[0]) - break; - - /* attach demod */ - adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config, - &d->i2c_adap); - - break; - case ANYSEE_HW_507CD: /* 6 */ - /* E30 Plus */ - - /* enable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); - if (ret) - goto error; - - /* enable transport stream on IOA[7] */ - ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); - if (ret) - goto error; - - /* attach demod */ - adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config, - &d->i2c_adap); - - break; - case ANYSEE_HW_507DC: /* 10 */ - /* E30 C Plus */ - - /* enable DVB-C demod on IOD[0] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); - if (ret) - goto error; - - /* attach demod */ - adap->fe[0] = dvb_attach(tda10023_attach, - &anysee_tda10023_config, &d->i2c_adap, 0x48); - - break; - case ANYSEE_HW_507SI: /* 11 */ - /* E30 S2 Plus */ - - /* enable DVB-S/S2 demod on IOD[0] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); - if (ret) - goto error; - - /* attach demod */ - adap->fe[0] = dvb_attach(cx24116_attach, &anysee_cx24116_config, - &d->i2c_adap); - - break; - case ANYSEE_HW_507FA: /* 15 */ - /* E30 Combo Plus */ - /* E30 C Plus */ - - /* enable tuner on IOE[4] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 4), 0x10); - if (ret) - goto error; - - /* probe TDA18212 */ - tmp = 0; - ret = i2c_transfer(&d->i2c_adap, msg, 2); - if (ret == 2 && tmp == 0xc7) - deb_info("%s: TDA18212 found\n", __func__); - else - tmp = 0; - - /* disable tuner on IOE[4] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 4), 0x10); - if (ret) - goto error; - - /* disable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01); - if (ret) - goto error; - - /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); - if (ret) - goto error; - - /* attach demod */ - if (tmp == 0xc7) { - /* TDA18212 config */ - adap->fe[0] = dvb_attach(tda10023_attach, - &anysee_tda10023_tda18212_config, - &d->i2c_adap, 0x48); - - /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ - if (adap->fe[0]) - adap->fe[0]->ops.i2c_gate_ctrl = - anysee_i2c_gate_ctrl; - } else { - /* PLL config */ - adap->fe[0] = dvb_attach(tda10023_attach, - &anysee_tda10023_config, - &d->i2c_adap, 0x48); - } - - /* break out if first frontend attaching fails */ - if (!adap->fe[0]) - break; - - /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); - if (ret) - goto error; - - /* enable DVB-T demod on IOD[0] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); - if (ret) - goto error; - - /* attach demod */ - if (tmp == 0xc7) { - /* TDA18212 config */ - adap->fe[1] = dvb_attach(zl10353_attach, - &anysee_zl10353_tda18212_config2, - &d->i2c_adap); - - /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ - if (adap->fe[1]) - adap->fe[1]->ops.i2c_gate_ctrl = - anysee_i2c_gate_ctrl; - } else { - /* PLL config */ - adap->fe[1] = dvb_attach(zl10353_attach, - &anysee_zl10353_config, - &d->i2c_adap); - } - - break; - case ANYSEE_HW_508TC: /* 18 */ - case ANYSEE_HW_508PTC: /* 21 */ - /* E7 TC */ - /* E7 PTC */ - - /* disable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40); - if (ret) - goto error; - - /* enable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); - if (ret) - goto error; - - /* attach demod */ - adap->fe[0] = dvb_attach(tda10023_attach, - &anysee_tda10023_tda18212_config, - &d->i2c_adap, 0x48); - - /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ - if (adap->fe[0]) - adap->fe[0]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl; - - /* break out if first frontend attaching fails */ - if (!adap->fe[0]) - break; - - /* disable DVB-C demod on IOD[5] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); - if (ret) - goto error; - - /* enable DVB-T demod on IOD[6] */ - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40); - if (ret) - goto error; - - /* attach demod */ - adap->fe[1] = dvb_attach(zl10353_attach, - &anysee_zl10353_tda18212_config, - &d->i2c_adap); - - /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ - if (adap->fe[1]) - adap->fe[1]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl; - - state->has_ci = true; - - break; - case ANYSEE_HW_508S2: /* 19 */ - case ANYSEE_HW_508PS2: /* 22 */ - /* E7 S2 */ - /* E7 PS2 */ - - /* enable DVB-S/S2 demod on IOE[5] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20); - if (ret) - goto error; - - /* attach demod */ - adap->fe[0] = dvb_attach(stv0900_attach, - &anysee_stv0900_config, &d->i2c_adap, 0); - - state->has_ci = true; - - break; - case ANYSEE_HW_508T2C: /* 20 */ - /* E7 T2C */ - - /* enable DVB-T/T2/C demod on IOE[5] */ - ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20); - if (ret) - goto error; - - /* attach demod */ - adap->fe[0] = dvb_attach(cxd2820r_attach, - &anysee_cxd2820r_config, &d->i2c_adap); - - state->has_ci = true; - - break; - } - - if (!adap->fe[0]) { - /* we have no frontend :-( */ - ret = -ENODEV; - err("Unsupported Anysee version. " \ - "Please report the <linux-media@vger.kernel.org>."); - } -error: - return ret; -} - -static int anysee_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct anysee_state *state = adap_to_priv(adap); - struct dvb_usb_device *d = adap_to_d(adap); - struct dvb_frontend *fe; - int ret; - deb_info("%s: adap=%d\n", __func__, adap->id); - - switch (state->hw) { - case ANYSEE_HW_507T: /* 2 */ - /* E30 */ - - /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), NULL, - DVB_PLL_THOMSON_DTT7579); - - break; - case ANYSEE_HW_507CD: /* 6 */ - /* E30 Plus */ - - /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), - &d->i2c_adap, DVB_PLL_THOMSON_DTT7579); - - break; - case ANYSEE_HW_507DC: /* 10 */ - /* E30 C Plus */ - - /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1), - &d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); - - break; - case ANYSEE_HW_507SI: /* 11 */ - /* E30 S2 Plus */ - - /* attach LNB controller */ - fe = dvb_attach(isl6423_attach, adap->fe[0], &d->i2c_adap, - &anysee_isl6423_config); - - break; - case ANYSEE_HW_507FA: /* 15 */ - /* E30 Combo Plus */ - /* E30 C Plus */ - - /* Try first attach TDA18212 silicon tuner on IOE[4], if that - * fails attach old simple PLL. */ - - /* attach tuner */ - fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap, - &anysee_tda18212_config); - - if (fe && adap->fe[1]) { - /* attach tuner for 2nd FE */ - fe = dvb_attach(tda18212_attach, adap->fe[1], - &d->i2c_adap, &anysee_tda18212_config); - break; - } else if (fe) { - break; - } - - /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1), - &d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); - - if (fe && adap->fe[1]) { - /* attach tuner for 2nd FE */ - fe = dvb_attach(dvb_pll_attach, adap->fe[0], - (0xc0 >> 1), &d->i2c_adap, - DVB_PLL_SAMSUNG_DTOS403IH102A); - } - - break; - case ANYSEE_HW_508TC: /* 18 */ - case ANYSEE_HW_508PTC: /* 21 */ - /* E7 TC */ - /* E7 PTC */ - - /* attach tuner */ - fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap, - &anysee_tda18212_config); - - if (fe) { - /* attach tuner for 2nd FE */ - fe = dvb_attach(tda18212_attach, adap->fe[1], - &d->i2c_adap, &anysee_tda18212_config); - } - - break; - case ANYSEE_HW_508S2: /* 19 */ - case ANYSEE_HW_508PS2: /* 22 */ - /* E7 S2 */ - /* E7 PS2 */ - - /* attach tuner */ - fe = dvb_attach(stv6110_attach, adap->fe[0], - &anysee_stv6110_config, &d->i2c_adap); - - if (fe) { - /* attach LNB controller */ - fe = dvb_attach(isl6423_attach, adap->fe[0], - &d->i2c_adap, &anysee_isl6423_config); - } - - break; - - case ANYSEE_HW_508T2C: /* 20 */ - /* E7 T2C */ - - /* attach tuner */ - fe = dvb_attach(tda18212_attach, adap->fe[0], &d->i2c_adap, - &anysee_tda18212_config2); - - break; - default: - fe = NULL; - } - - if (fe) - ret = 0; - else - ret = -ENODEV; - - return ret; -} - -static int anysee_rc_query(struct dvb_usb_device *d) -{ - u8 buf[] = {CMD_GET_IR_CODE}; - u8 ircode[2]; - int ret; - - /* Remote controller is basic NEC using address byte 0x08. - Anysee device RC query returns only two bytes, status and code, - address byte is dropped. Also it does not return any value for - NEC RCs having address byte other than 0x08. Due to that, we - cannot use that device as standard NEC receiver. - It could be possible make hack which reads whole code directly - from device memory... */ - - ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode)); - if (ret) - return ret; - - if (ircode[0]) { - deb_rc("%s: key pressed %02x\n", __func__, ircode[1]); - rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0); - } - - return 0; -} - -static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) -{ - rc->allowed_protos = RC_TYPE_NEC; - rc->query = anysee_rc_query; - rc->interval = 250; /* windows driver uses 500ms */ - - return 0; -} - -static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot, - int addr) -{ - struct dvb_usb_device *d = ci->data; - int ret; - u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1}; - u8 val; - - ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1); - if (ret) - return ret; - - return val; -} - -static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot, - int addr, u8 val) -{ - struct dvb_usb_device *d = ci->data; - int ret; - u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val}; - - ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); - if (ret) - return ret; - - return 0; -} - -static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot, - u8 addr) -{ - struct dvb_usb_device *d = ci->data; - int ret; - u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1}; - u8 val; - - ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1); - if (ret) - return ret; - - return val; -} - -static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot, - u8 addr, u8 val) -{ - struct dvb_usb_device *d = ci->data; - int ret; - u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val}; - - ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); - if (ret) - return ret; - - return 0; -} - -static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot) -{ - struct dvb_usb_device *d = ci->data; - int ret; - struct anysee_state *state = d_to_priv(d); - - state->ci_cam_ready = jiffies + msecs_to_jiffies(1000); - - ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); - if (ret) - return ret; - - msleep(300); - - ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); - if (ret) - return ret; - - return 0; -} - -static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot) -{ - struct dvb_usb_device *d = ci->data; - int ret; - - ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); - if (ret) - return ret; - - msleep(30); - - ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); - if (ret) - return ret; - - return 0; -} - -static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot) -{ - struct dvb_usb_device *d = ci->data; - int ret; - - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02); - if (ret) - return ret; - - return 0; -} - -static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot, - int open) -{ - struct dvb_usb_device *d = ci->data; - struct anysee_state *state = d_to_priv(d); - int ret; - u8 tmp; - - ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40); - if (ret) - return ret; - - if (tmp == 0) { - ret = DVB_CA_EN50221_POLL_CAM_PRESENT; - if (time_after(jiffies, state->ci_cam_ready)) - ret |= DVB_CA_EN50221_POLL_CAM_READY; - } - - return ret; -} - -static int anysee_ci_init(struct dvb_usb_device *d) -{ - struct anysee_state *state = d_to_priv(d); - int ret; - - state->ci.owner = THIS_MODULE; - state->ci.read_attribute_mem = anysee_ci_read_attribute_mem; - state->ci.write_attribute_mem = anysee_ci_write_attribute_mem; - state->ci.read_cam_control = anysee_ci_read_cam_control; - state->ci.write_cam_control = anysee_ci_write_cam_control; - state->ci.slot_reset = anysee_ci_slot_reset; - state->ci.slot_shutdown = anysee_ci_slot_shutdown; - state->ci.slot_ts_enable = anysee_ci_slot_ts_enable; - state->ci.poll_slot_status = anysee_ci_poll_slot_status; - state->ci.data = d; - - ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); - if (ret) - return ret; - - ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07); - if (ret) - return ret; - - ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07); - if (ret) - return ret; - - ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1); - if (ret) - return ret; - - return 0; -} - -static void anysee_ci_release(struct dvb_usb_device *d) -{ - struct anysee_state *state = d_to_priv(d); - - /* detach CI */ - if (state->has_ci) - dvb_ca_en50221_release(&state->ci); - - return; -} - -static int anysee_init(struct dvb_usb_device *d) -{ - struct anysee_state *state = d_to_priv(d); - int ret; - - /* There is one interface with two alternate settings. - Alternate setting 0 is for bulk transfer. - Alternate setting 1 is for isochronous transfer. - We use bulk transfer (alternate setting 0). */ - ret = usb_set_interface(d->udev, 0, 0); - if (ret) - return ret; - - /* LED light */ - ret = anysee_led_ctrl(d, 0x01, 0x03); - if (ret) - return ret; - - /* enable IR */ - ret = anysee_ir_ctrl(d, 1); - if (ret) - return ret; - - /* attach CI */ - if (state->has_ci) { - ret = anysee_ci_init(d); - if (ret) { - state->has_ci = false; - return ret; - } - } - - return 0; -} - -static void anysee_exit(struct dvb_usb_device *d) -{ - return anysee_ci_release(d); -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties anysee_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct anysee_state), - - .generic_bulk_ctrl_endpoint = 0x01, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .i2c_algo = &anysee_i2c_algo, - .read_config = anysee_read_config, - .frontend_attach = anysee_frontend_attach, - .tuner_attach = anysee_tuner_attach, - .init = anysee_init, - .get_rc_config = anysee_get_rc_config, - .frontend_ctrl = anysee_frontend_ctrl, - .streaming_ctrl = anysee_streaming_ctrl, - .exit = anysee_exit, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x82, 8, 16 * 512), - } - } -}; - -static const struct usb_device_id anysee_id_table[] = { - { DVB_USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE, - &anysee_props, "Anysee", RC_MAP_ANYSEE) }, - { DVB_USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE, - &anysee_props, "Anysee", RC_MAP_ANYSEE) }, - { } -}; -MODULE_DEVICE_TABLE(usb, anysee_id_table); - -static struct usb_driver anysee_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = anysee_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(anysee_usb_driver); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/anysee.h b/drivers/media/dvb/dvb-usb-v2/anysee.h deleted file mode 100644 index dc40dcf7c328..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/anysee.h +++ /dev/null @@ -1,356 +0,0 @@ -/* - * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver - * - * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * TODO: - * - add smart card reader support for Conditional Access (CA) - * - * Card reader in Anysee is nothing more than ISO 7816 card reader. - * There is no hardware CAM in any Anysee device sold. - * In my understanding it should be implemented by making own module - * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This - * module registers serial interface that can be used to communicate - * with any ISO 7816 smart card. - * - * Any help according to implement serial smart card reader support - * is highly welcome! - */ - -#ifndef _DVB_USB_ANYSEE_H_ -#define _DVB_USB_ANYSEE_H_ - -#define DVB_USB_LOG_PREFIX "anysee" -#include "dvb_usb.h" -#include "dvb_ca_en50221.h" - -#ifdef CONFIG_DVB_USB_DEBUG -#define dprintk(var, level, args...) \ - do { if ((var & level)) printk(args); } while (0) -#define DVB_USB_DEBUG_STATUS -#else -#define dprintk(args...) -#define debug_dump(b, l, func) -#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" -#endif - -#define debug_dump(b, l, func) {\ - int loop_; \ - for (loop_ = 0; loop_ < l; loop_++) \ - func("%02x ", b[loop_]); \ - func("\n");\ -} - -#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) -#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) -#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) - -#undef err -#define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) -#undef info -#define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) -#undef warn -#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) - -enum cmd { - CMD_I2C_READ = 0x33, - CMD_I2C_WRITE = 0x31, - CMD_REG_READ = 0xb0, - CMD_REG_WRITE = 0xb1, - CMD_STREAMING_CTRL = 0x12, - CMD_LED_AND_IR_CTRL = 0x16, - CMD_GET_IR_CODE = 0x41, - CMD_GET_HW_INFO = 0x19, - CMD_SMARTCARD = 0x34, - CMD_CI = 0x37, -}; - -struct anysee_state { - u8 hw; /* PCB ID */ - u8 seq; - u8 fe_id:1; /* frondend ID */ - u8 has_ci:1; - struct dvb_ca_en50221 ci; - unsigned long ci_cam_ready; /* jiffies */ -}; - -#define ANYSEE_HW_507T 2 /* E30 */ -#define ANYSEE_HW_507CD 6 /* E30 Plus */ -#define ANYSEE_HW_507DC 10 /* E30 C Plus */ -#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ -#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ -#define ANYSEE_HW_508TC 18 /* E7 TC */ -#define ANYSEE_HW_508S2 19 /* E7 S2 */ -#define ANYSEE_HW_508T2C 20 /* E7 T2C */ -#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */ -#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */ - -#define REG_IOA 0x80 /* Port A (bit addressable) */ -#define REG_IOB 0x90 /* Port B (bit addressable) */ -#define REG_IOC 0xa0 /* Port C (bit addressable) */ -#define REG_IOD 0xb0 /* Port D (bit addressable) */ -#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */ -#define REG_OEA 0xb2 /* Port A Output Enable */ -#define REG_OEB 0xb3 /* Port B Output Enable */ -#define REG_OEC 0xb4 /* Port C Output Enable */ -#define REG_OED 0xb5 /* Port D Output Enable */ -#define REG_OEE 0xb6 /* Port E Output Enable */ - -#endif - -/*************************************************************************** - * USB API description (reverse engineered) - *************************************************************************** - -Transaction flow: -================= -BULK[00001] >>> REQUEST PACKET 64 bytes -BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) -BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) - -General reply packet(s) are always used if not own reply defined. - -============================================================================ -| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) -============================================================================ -| 00 | reply data (if any) from previous transaction -| | Just same reply packet as returned during previous transaction. -| | Needed only if reply is missed in previous transaction. -| | Just skip normally. ----------------------------------------------------------------------------- -| 01-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) -============================================================================ -| 00 | reply data (if any) ----------------------------------------------------------------------------- -| 01-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | I2C WRITE REQUEST PACKET -============================================================================ -| 00 | 0x31 I2C write command ----------------------------------------------------------------------------- -| 01 | i2c address ----------------------------------------------------------------------------- -| 02 | data length -| | 0x02 (for typical I2C reg / val pair) ----------------------------------------------------------------------------- -| 03 | 0x01 ----------------------------------------------------------------------------- -| 04- | data ----------------------------------------------------------------------------- -| -59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | I2C READ REQUEST PACKET -============================================================================ -| 00 | 0x33 I2C read command ----------------------------------------------------------------------------- -| 01 | i2c address + 1 ----------------------------------------------------------------------------- -| 02 | register ----------------------------------------------------------------------------- -| 03 | 0x00 ----------------------------------------------------------------------------- -| 04 | 0x00 ----------------------------------------------------------------------------- -| 05 | data length ----------------------------------------------------------------------------- -| 06-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET -============================================================================ -| 00 | 0xb1 register write command ----------------------------------------------------------------------------- -| 01-02 | register ----------------------------------------------------------------------------- -| 03 | 0x01 ----------------------------------------------------------------------------- -| 04 | value ----------------------------------------------------------------------------- -| 05-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET -============================================================================ -| 00 | 0xb0 register read command ----------------------------------------------------------------------------- -| 01-02 | register ----------------------------------------------------------------------------- -| 03 | 0x01 ----------------------------------------------------------------------------- -| 04-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | LED CONTROL REQUEST PACKET -============================================================================ -| 00 | 0x16 LED and IR control command ----------------------------------------------------------------------------- -| 01 | 0x01 (LED) ----------------------------------------------------------------------------- -| 03 | 0x00 blink -| | 0x01 lights continuously ----------------------------------------------------------------------------- -| 04 | blink interval -| | 0x00 fastest (looks like LED lights continuously) -| | 0xff slowest ----------------------------------------------------------------------------- -| 05-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | IR CONTROL REQUEST PACKET -============================================================================ -| 00 | 0x16 LED and IR control command ----------------------------------------------------------------------------- -| 01 | 0x02 (IR) ----------------------------------------------------------------------------- -| 03 | 0x00 IR disabled -| | 0x01 IR enabled ----------------------------------------------------------------------------- -| 04-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | STREAMING CONTROL REQUEST PACKET -============================================================================ -| 00 | 0x12 streaming control command ----------------------------------------------------------------------------- -| 01 | 0x00 streaming disabled -| | 0x01 streaming enabled ----------------------------------------------------------------------------- -| 02 | 0x00 ----------------------------------------------------------------------------- -| 03-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | REMOTE CONTROL REQUEST PACKET -============================================================================ -| 00 | 0x41 remote control command ----------------------------------------------------------------------------- -| 01-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | REMOTE CONTROL REPLY PACKET -============================================================================ -| 00 | 0x00 code not received -| | 0x01 code received ----------------------------------------------------------------------------- -| 01 | remote control code ----------------------------------------------------------------------------- -| 02-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | GET HARDWARE INFO REQUEST PACKET -============================================================================ -| 00 | 0x19 get hardware info command ----------------------------------------------------------------------------- -| 01-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | GET HARDWARE INFO REPLY PACKET -============================================================================ -| 00 | hardware id ----------------------------------------------------------------------------- -| 01-02 | firmware version ----------------------------------------------------------------------------- -| 03-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -============================================================================ -| 00-63 | SMART CARD READER PACKET -============================================================================ -| 00 | 0x34 smart card reader command ----------------------------------------------------------------------------- -| xx | ----------------------------------------------------------------------------- -| xx-59 | don't care ----------------------------------------------------------------------------- -| 60 | packet sequence number ----------------------------------------------------------------------------- -| 61-63 | don't care ----------------------------------------------------------------------------- - -*/ diff --git a/drivers/media/dvb/dvb-usb-v2/au6610.c b/drivers/media/dvb/dvb-usb-v2/au6610.c deleted file mode 100644 index 05f2a8628142..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/au6610.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. - * - * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "au6610.h" -#include "zl10353.h" -#include "qt1010.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - int ret; - u16 index; - u8 *usb_buf; - - /* - * allocate enough for all known requests, - * read returns 5 and write 6 bytes - */ - usb_buf = kmalloc(6, GFP_KERNEL); - if (!usb_buf) - return -ENOMEM; - - switch (wlen) { - case 1: - index = wbuf[0] << 8; - break; - case 2: - index = wbuf[0] << 8; - index += wbuf[1]; - break; - default: - pr_err("%s: wlen = %d, aborting\n", KBUILD_MODNAME, wlen); - ret = -EINVAL; - goto error; - } - - ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, - USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, - usb_buf, 6, AU6610_USB_TIMEOUT); - if (ret < 0) - goto error; - - switch (operation) { - case AU6610_REQ_I2C_READ: - case AU6610_REQ_USB_READ: - /* requested value is always 5th byte in buffer */ - rbuf[0] = usb_buf[4]; - } -error: - kfree(usb_buf); - return ret; -} - -static int au6610_i2c_msg(struct dvb_usb_device *d, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u8 request; - u8 wo = (rbuf == NULL || rlen == 0); /* write-only */ - - if (wo) { - request = AU6610_REQ_I2C_WRITE; - } else { /* rw */ - request = AU6610_REQ_I2C_READ; - } - - return au6610_usb_msg(d, request, addr, wbuf, wlen, rbuf, rlen); -} - - -/* I2C */ -static int au6610_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - if (num > 2) - return -EINVAL; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, msg[i+1].buf, - msg[i+1].len) < 0) - break; - i++; - } else if (au6610_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, NULL, 0) < 0) - break; - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - - -static u32 au6610_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm au6610_i2c_algo = { - .master_xfer = au6610_i2c_xfer, - .functionality = au6610_i2c_func, -}; - -/* Callbacks for DVB USB */ -static struct zl10353_config au6610_zl10353_config = { - .demod_address = 0x0f, - .no_tuner = 1, - .parallel_ts = 1, -}; - -static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) -{ - adap->fe[0] = dvb_attach(zl10353_attach, &au6610_zl10353_config, - &adap_to_d(adap)->i2c_adap); - if (adap->fe[0] == NULL) - return -ENODEV; - - return 0; -} - -static struct qt1010_config au6610_qt1010_config = { - .i2c_address = 0x62 -}; - -static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap) -{ - return dvb_attach(qt1010_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &au6610_qt1010_config) == NULL ? -ENODEV : 0; -} - -static int au6610_init(struct dvb_usb_device *d) -{ - /* TODO: this functionality belongs likely to the streaming control */ - /* bInterfaceNumber 0, bAlternateSetting 5 */ - return usb_set_interface(d->udev, 0, 5); -} - -static struct dvb_usb_device_properties au6610_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - - .i2c_algo = &au6610_i2c_algo, - .frontend_attach = au6610_zl10353_frontend_attach, - .tuner_attach = au6610_qt1010_tuner_attach, - .init = au6610_init, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_ISOC(0x82, 5, 40, 942, 1), - }, - }, -}; - -static const struct usb_device_id au6610_id_table[] = { - { DVB_USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110, - &au6610_props, "Sigmatek DVB-110", NULL) }, - { } -}; -MODULE_DEVICE_TABLE(usb, au6610_id_table); - -static struct usb_driver au6610_driver = { - .name = KBUILD_MODNAME, - .id_table = au6610_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(au6610_driver); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/au6610.h b/drivers/media/dvb/dvb-usb-v2/au6610.h deleted file mode 100644 index ea337bfc00b1..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/au6610.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. - * - * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef AU6610_H -#define AU6610_H -#include "dvb_usb.h" - -#define AU6610_REQ_I2C_WRITE 0x14 -#define AU6610_REQ_I2C_READ 0x13 -#define AU6610_REQ_USB_WRITE 0x16 -#define AU6610_REQ_USB_READ 0x15 - -#define AU6610_USB_TIMEOUT 1000 - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/az6007.c b/drivers/media/dvb/dvb-usb-v2/az6007.c deleted file mode 100644 index 54f1221d930d..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/az6007.c +++ /dev/null @@ -1,919 +0,0 @@ -/* - * Driver for AzureWave 6007 DVB-C/T USB2.0 and clones - * - * Copyright (c) Henry Wang <Henry.wang@AzureWave.com> - * - * This driver was made publicly available by Terratec, at: - * http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz - * The original driver's license is GPL, as declared with MODULE_LICENSE() - * - * Copyright (c) 2010-2012 Mauro Carvalho Chehab <mchehab@redhat.com> - * Driver modified by in order to work with upstream drxk driver, and - * tons of bugs got fixed, and converted to use dvb-usb-v2. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation under version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "drxk.h" -#include "mt2063.h" -#include "dvb_ca_en50221.h" -#include "dvb_usb.h" -#include "cypress_firmware.h" - -#define AZ6007_FIRMWARE "dvb-usb-terratec-h7-az6007.fw" - -static int az6007_xfer_debug; -module_param_named(xfer_debug, az6007_xfer_debug, int, 0644); -MODULE_PARM_DESC(xfer_debug, "Enable xfer debug"); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -/* Known requests (Cypress FX2 firmware + az6007 "private" ones*/ - -#define FX2_OED 0xb5 -#define AZ6007_READ_DATA 0xb7 -#define AZ6007_I2C_RD 0xb9 -#define AZ6007_POWER 0xbc -#define AZ6007_I2C_WR 0xbd -#define FX2_SCON1 0xc0 -#define AZ6007_TS_THROUGH 0xc7 -#define AZ6007_READ_IR 0xb4 - -struct az6007_device_state { - struct mutex mutex; - struct mutex ca_mutex; - struct dvb_ca_en50221 ca; - unsigned warm:1; - int (*gate_ctrl) (struct dvb_frontend *, int); - unsigned char data[4096]; -}; - -static struct drxk_config terratec_h7_drxk = { - .adr = 0x29, - .parallel_ts = true, - .dynamic_clk = true, - .single_master = true, - .enable_merr_cfg = true, - .no_i2c_bridge = false, - .chunk_size = 64, - .mpeg_out_clk_strength = 0x02, - .qam_demod_parameter_count = 2, - .microcode_name = "dvb-usb-terratec-h7-drxk.fw", -}; - -static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - struct az6007_device_state *st = fe_to_priv(fe); - struct dvb_usb_adapter *adap = fe->sec_priv; - int status = 0; - - pr_debug("%s: %s\n", __func__, enable ? "enable" : "disable"); - - if (!adap || !st) - return -EINVAL; - - if (enable) - status = st->gate_ctrl(fe, 1); - else - status = st->gate_ctrl(fe, 0); - - return status; -} - -static struct mt2063_config az6007_mt2063_config = { - .tuner_address = 0x60, - .refclock = 36125000, -}; - -static int __az6007_read(struct usb_device *udev, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - int ret; - - ret = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - req, - USB_TYPE_VENDOR | USB_DIR_IN, - value, index, b, blen, 5000); - if (ret < 0) { - pr_warn("usb read operation failed. (%d)\n", ret); - return -EIO; - } - - if (az6007_xfer_debug) { - printk(KERN_DEBUG "az6007: IN req: %02x, value: %04x, index: %04x\n", - req, value, index); - print_hex_dump_bytes("az6007: payload: ", - DUMP_PREFIX_NONE, b, blen); - } - - return ret; -} - -static int az6007_read(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - struct az6007_device_state *st = d->priv; - int ret; - - if (mutex_lock_interruptible(&st->mutex) < 0) - return -EAGAIN; - - ret = __az6007_read(d->udev, req, value, index, b, blen); - - mutex_unlock(&st->mutex); - - return ret; -} - -static int __az6007_write(struct usb_device *udev, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - int ret; - - if (az6007_xfer_debug) { - printk(KERN_DEBUG "az6007: OUT req: %02x, value: %04x, index: %04x\n", - req, value, index); - print_hex_dump_bytes("az6007: payload: ", - DUMP_PREFIX_NONE, b, blen); - } - - if (blen > 64) { - pr_err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n", - blen); - return -EOPNOTSUPP; - } - - ret = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - req, - USB_TYPE_VENDOR | USB_DIR_OUT, - value, index, b, blen, 5000); - if (ret != blen) { - pr_err("usb write operation failed. (%d)\n", ret); - return -EIO; - } - - return 0; -} - -static int az6007_write(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - struct az6007_device_state *st = d->priv; - int ret; - - if (mutex_lock_interruptible(&st->mutex) < 0) - return -EAGAIN; - - ret = __az6007_write(d->udev, req, value, index, b, blen); - - mutex_unlock(&st->mutex); - - return ret; -} - -static int az6007_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct dvb_usb_device *d = fe_to_d(fe); - - pr_debug("%s: %s\n", __func__, onoff ? "enable" : "disable"); - - return az6007_write(d, 0xbc, onoff, 0, NULL, 0); -} - -/* remote control stuff (does not work with my box) */ -static int az6007_rc_query(struct dvb_usb_device *d) -{ - struct az6007_device_state *st = d_to_priv(d); - unsigned code = 0; - - az6007_read(d, AZ6007_READ_IR, 0, 0, st->data, 10); - - if (st->data[1] == 0x44) - return 0; - - if ((st->data[1] ^ st->data[2]) == 0xff) - code = st->data[1]; - else - code = st->data[1] << 8 | st->data[2]; - - if ((st->data[3] ^ st->data[4]) == 0xff) - code = code << 8 | st->data[3]; - else - code = code << 16 | st->data[3] << 8 | st->data[4]; - - rc_keydown(d->rc_dev, code, st->data[5]); - - return 0; -} - -static int az6007_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, - int slot, - int address) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = d_to_priv(d); - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - if (slot != 0) - return -EINVAL; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - - mutex_lock(&state->ca_mutex); - - req = 0xC1; - value = address; - index = 0; - blen = 1; - - ret = az6007_read(d, req, value, index, b, blen); - if (ret < 0) { - pr_warn("usb in operation failed. (%d)\n", ret); - ret = -EINVAL; - } else { - ret = b[0]; - } - - mutex_unlock(&state->ca_mutex); - kfree(b); - return ret; -} - -static int az6007_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, - int slot, - int address, - u8 value) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = d_to_priv(d); - - int ret; - u8 req; - u16 value1; - u16 index; - int blen; - - pr_debug("%s(), slot %d\n", __func__, slot); - if (slot != 0) - return -EINVAL; - - mutex_lock(&state->ca_mutex); - req = 0xC2; - value1 = address; - index = value; - blen = 0; - - ret = az6007_write(d, req, value1, index, NULL, blen); - if (ret != 0) - pr_warn("usb out operation failed. (%d)\n", ret); - - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int az6007_ci_read_cam_control(struct dvb_ca_en50221 *ca, - int slot, - u8 address) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = d_to_priv(d); - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - if (slot != 0) - return -EINVAL; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - - mutex_lock(&state->ca_mutex); - - req = 0xC3; - value = address; - index = 0; - blen = 2; - - ret = az6007_read(d, req, value, index, b, blen); - if (ret < 0) { - pr_warn("usb in operation failed. (%d)\n", ret); - ret = -EINVAL; - } else { - if (b[0] == 0) - pr_warn("Read CI IO error\n"); - - ret = b[1]; - pr_debug("read cam data = %x from 0x%x\n", b[1], value); - } - - mutex_unlock(&state->ca_mutex); - kfree(b); - return ret; -} - -static int az6007_ci_write_cam_control(struct dvb_ca_en50221 *ca, - int slot, - u8 address, - u8 value) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = d_to_priv(d); - - int ret; - u8 req; - u16 value1; - u16 index; - int blen; - - if (slot != 0) - return -EINVAL; - - mutex_lock(&state->ca_mutex); - req = 0xC4; - value1 = address; - index = value; - blen = 0; - - ret = az6007_write(d, req, value1, index, NULL, blen); - if (ret != 0) { - pr_warn("usb out operation failed. (%d)\n", ret); - goto failed; - } - -failed: - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - - req = 0xC8; - value = 0; - index = 0; - blen = 1; - - ret = az6007_read(d, req, value, index, b, blen); - if (ret < 0) { - pr_warn("usb in operation failed. (%d)\n", ret); - ret = -EIO; - } else{ - ret = b[0]; - } - kfree(b); - return ret; -} - -static int az6007_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = d_to_priv(d); - - int ret, i; - u8 req; - u16 value; - u16 index; - int blen; - - mutex_lock(&state->ca_mutex); - - req = 0xC6; - value = 1; - index = 0; - blen = 0; - - ret = az6007_write(d, req, value, index, NULL, blen); - if (ret != 0) { - pr_warn("usb out operation failed. (%d)\n", ret); - goto failed; - } - - msleep(500); - req = 0xC6; - value = 0; - index = 0; - blen = 0; - - ret = az6007_write(d, req, value, index, NULL, blen); - if (ret != 0) { - pr_warn("usb out operation failed. (%d)\n", ret); - goto failed; - } - - for (i = 0; i < 15; i++) { - msleep(100); - - if (CI_CamReady(ca, slot)) { - pr_debug("CAM Ready\n"); - break; - } - } - msleep(5000); - -failed: - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int az6007_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) -{ - return 0; -} - -static int az6007_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = d_to_priv(d); - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - - pr_debug("%s()\n", __func__); - mutex_lock(&state->ca_mutex); - req = 0xC7; - value = 1; - index = 0; - blen = 0; - - ret = az6007_write(d, req, value, index, NULL, blen); - if (ret != 0) { - pr_warn("usb out operation failed. (%d)\n", ret); - goto failed; - } - -failed: - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int az6007_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6007_device_state *state = d_to_priv(d); - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - mutex_lock(&state->ca_mutex); - - req = 0xC5; - value = 0; - index = 0; - blen = 1; - - ret = az6007_read(d, req, value, index, b, blen); - if (ret < 0) { - pr_warn("usb in operation failed. (%d)\n", ret); - ret = -EIO; - } else - ret = 0; - - if (!ret && b[0] == 1) { - ret = DVB_CA_EN50221_POLL_CAM_PRESENT | - DVB_CA_EN50221_POLL_CAM_READY; - } - - mutex_unlock(&state->ca_mutex); - kfree(b); - return ret; -} - - -static void az6007_ci_uninit(struct dvb_usb_device *d) -{ - struct az6007_device_state *state; - - pr_debug("%s()\n", __func__); - - if (NULL == d) - return; - - state = d_to_priv(d); - if (NULL == state) - return; - - if (NULL == state->ca.data) - return; - - dvb_ca_en50221_release(&state->ca); - - memset(&state->ca, 0, sizeof(state->ca)); -} - - -static int az6007_ci_init(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct az6007_device_state *state = adap_to_priv(adap); - int ret; - - pr_debug("%s()\n", __func__); - - mutex_init(&state->ca_mutex); - state->ca.owner = THIS_MODULE; - state->ca.read_attribute_mem = az6007_ci_read_attribute_mem; - state->ca.write_attribute_mem = az6007_ci_write_attribute_mem; - state->ca.read_cam_control = az6007_ci_read_cam_control; - state->ca.write_cam_control = az6007_ci_write_cam_control; - state->ca.slot_reset = az6007_ci_slot_reset; - state->ca.slot_shutdown = az6007_ci_slot_shutdown; - state->ca.slot_ts_enable = az6007_ci_slot_ts_enable; - state->ca.poll_slot_status = az6007_ci_poll_slot_status; - state->ca.data = d; - - ret = dvb_ca_en50221_init(&adap->dvb_adap, - &state->ca, - 0, /* flags */ - 1);/* n_slots */ - if (ret != 0) { - pr_err("Cannot initialize CI: Error %d.\n", ret); - memset(&state->ca, 0, sizeof(state->ca)); - return ret; - } - - pr_debug("CI initialized.\n"); - - return 0; -} - -static int az6007_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6]) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct az6007_device_state *st = adap_to_priv(adap); - int ret; - - ret = az6007_read(d, AZ6007_READ_DATA, 6, 0, st->data, 6); - memcpy(mac, st->data, 6); - - if (ret > 0) - pr_debug("%s: mac is %pM\n", __func__, mac); - - return ret; -} - -static int az6007_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct az6007_device_state *st = adap_to_priv(adap); - struct dvb_usb_device *d = adap_to_d(adap); - - pr_debug("attaching demod drxk\n"); - - adap->fe[0] = dvb_attach(drxk_attach, &terratec_h7_drxk, - &d->i2c_adap); - if (!adap->fe[0]) - return -EINVAL; - - adap->fe[0]->sec_priv = adap; - st->gate_ctrl = adap->fe[0]->ops.i2c_gate_ctrl; - adap->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl; - - az6007_ci_init(adap); - - return 0; -} - -static int az6007_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - - pr_debug("attaching tuner mt2063\n"); - - /* Attach mt2063 to DVB-C frontend */ - if (adap->fe[0]->ops.i2c_gate_ctrl) - adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], 1); - if (!dvb_attach(mt2063_attach, adap->fe[0], - &az6007_mt2063_config, - &d->i2c_adap)) - return -EINVAL; - - if (adap->fe[0]->ops.i2c_gate_ctrl) - adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], 0); - - return 0; -} - -static int az6007_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - struct az6007_device_state *state = d_to_priv(d); - int ret; - - pr_debug("%s()\n", __func__); - - if (!state->warm) { - mutex_init(&state->mutex); - - ret = az6007_write(d, AZ6007_POWER, 0, 2, NULL, 0); - if (ret < 0) - return ret; - msleep(60); - ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0); - if (ret < 0) - return ret; - msleep(100); - ret = az6007_write(d, AZ6007_POWER, 1, 3, NULL, 0); - if (ret < 0) - return ret; - msleep(20); - ret = az6007_write(d, AZ6007_POWER, 1, 4, NULL, 0); - if (ret < 0) - return ret; - - msleep(400); - ret = az6007_write(d, FX2_SCON1, 0, 3, NULL, 0); - if (ret < 0) - return ret; - msleep(150); - ret = az6007_write(d, FX2_SCON1, 1, 3, NULL, 0); - if (ret < 0) - return ret; - msleep(430); - ret = az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0); - if (ret < 0) - return ret; - - state->warm = true; - - return 0; - } - - if (!onoff) - return 0; - - az6007_write(d, AZ6007_POWER, 0, 0, NULL, 0); - az6007_write(d, AZ6007_TS_THROUGH, 0, 0, NULL, 0); - - return 0; -} - -/* I2C */ -static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct az6007_device_state *st = d_to_priv(d); - int i, j, len; - int ret = 0; - u16 index; - u16 value; - int length; - u8 req, addr; - - if (mutex_lock_interruptible(&st->mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - addr = msgs[i].addr << 1; - if (((i + 1) < num) - && (msgs[i].len == 1) - && ((msgs[i].flags & I2C_M_RD) != I2C_M_RD) - && (msgs[i + 1].flags & I2C_M_RD) - && (msgs[i].addr == msgs[i + 1].addr)) { - /* - * A write + read xfer for the same address, where - * the first xfer has just 1 byte length. - * Need to join both into one operation - */ - if (az6007_xfer_debug) - printk(KERN_DEBUG "az6007: I2C W/R addr=0x%x len=%d/%d\n", - addr, msgs[i].len, msgs[i + 1].len); - req = AZ6007_I2C_RD; - index = msgs[i].buf[0]; - value = addr | (1 << 8); - length = 6 + msgs[i + 1].len; - len = msgs[i + 1].len; - ret = __az6007_read(d->udev, req, value, index, - st->data, length); - if (ret >= len) { - for (j = 0; j < len; j++) - msgs[i + 1].buf[j] = st->data[j + 5]; - } else - ret = -EIO; - i++; - } else if (!(msgs[i].flags & I2C_M_RD)) { - /* write bytes */ - if (az6007_xfer_debug) - printk(KERN_DEBUG "az6007: I2C W addr=0x%x len=%d\n", - addr, msgs[i].len); - req = AZ6007_I2C_WR; - index = msgs[i].buf[0]; - value = addr | (1 << 8); - length = msgs[i].len - 1; - len = msgs[i].len - 1; - for (j = 0; j < len; j++) - st->data[j] = msgs[i].buf[j + 1]; - ret = __az6007_write(d->udev, req, value, index, - st->data, length); - } else { - /* read bytes */ - if (az6007_xfer_debug) - printk(KERN_DEBUG "az6007: I2C R addr=0x%x len=%d\n", - addr, msgs[i].len); - req = AZ6007_I2C_RD; - index = msgs[i].buf[0]; - value = addr; - length = msgs[i].len + 6; - len = msgs[i].len; - ret = __az6007_read(d->udev, req, value, index, - st->data, length); - for (j = 0; j < len; j++) - msgs[i].buf[j] = st->data[j + 5]; - } - if (ret < 0) - goto err; - } -err: - mutex_unlock(&st->mutex); - - if (ret < 0) { - pr_info("%s ERROR: %i\n", __func__, ret); - return ret; - } - return num; -} - -static u32 az6007_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm az6007_i2c_algo = { - .master_xfer = az6007_i2c_xfer, - .functionality = az6007_i2c_func, -}; - -static int az6007_identify_state(struct dvb_usb_device *d, const char **name) -{ - int ret; - u8 *mac; - - pr_debug("Identifying az6007 state\n"); - - mac = kmalloc(6, GFP_ATOMIC); - if (!mac) - return -ENOMEM; - - /* Try to read the mac address */ - ret = __az6007_read(d->udev, AZ6007_READ_DATA, 6, 0, mac, 6); - if (ret == 6) - ret = WARM; - else - ret = COLD; - - kfree(mac); - - if (ret == COLD) { - __az6007_write(d->udev, 0x09, 1, 0, NULL, 0); - __az6007_write(d->udev, 0x00, 0, 0, NULL, 0); - __az6007_write(d->udev, 0x00, 0, 0, NULL, 0); - } - - pr_debug("Device is on %s state\n", - ret == WARM ? "warm" : "cold"); - return ret; -} - -static void az6007_usb_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - az6007_ci_uninit(d); - dvb_usbv2_disconnect(intf); -} - -static int az6007_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) -{ - pr_debug("Getting az6007 Remote Control properties\n"); - - rc->allowed_protos = RC_TYPE_NEC; - rc->query = az6007_rc_query; - rc->interval = 400; - - return 0; -} - -static int az6007_download_firmware(struct dvb_usb_device *d, - const struct firmware *fw) -{ - pr_debug("Loading az6007 firmware\n"); - - return usbv2_cypress_load_firmware(d->udev, fw, CYPRESS_FX2); -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties az6007_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .firmware = AZ6007_FIRMWARE, - - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct az6007_device_state), - .i2c_algo = &az6007_i2c_algo, - .tuner_attach = az6007_tuner_attach, - .frontend_attach = az6007_frontend_attach, - .streaming_ctrl = az6007_streaming_ctrl, - .get_rc_config = az6007_get_rc_config, - .read_mac_address = az6007_read_mac_addr, - .download_firmware = az6007_download_firmware, - .identify_state = az6007_identify_state, - .power_ctrl = az6007_power_ctrl, - .num_adapters = 1, - .adapter = { - { .stream = DVB_USB_STREAM_BULK(0x02, 10, 4096), } - } -}; - -static struct usb_device_id az6007_usb_table[] = { - {DVB_USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007, - &az6007_props, "Azurewave 6007", RC_MAP_EMPTY)}, - {DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7, - &az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)}, - {DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2, - &az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)}, - {0}, -}; - -MODULE_DEVICE_TABLE(usb, az6007_usb_table); - -static int az6007_suspend(struct usb_interface *intf, pm_message_t msg) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - - az6007_ci_uninit(d); - return dvb_usbv2_suspend(intf, msg); -} - -static int az6007_resume(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - struct dvb_usb_adapter *adap = &d->adapter[0]; - - az6007_ci_init(adap); - return dvb_usbv2_resume(intf); -} - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver az6007_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = az6007_usb_table, - .probe = dvb_usbv2_probe, - .disconnect = az6007_usb_disconnect, - .no_dynamic_id = 1, - .soft_unbind = 1, - /* - * FIXME: need to implement reset_resume, likely with - * dvb-usb-v2 core support - */ - .suspend = az6007_suspend, - .resume = az6007_resume, -}; - -module_usb_driver(az6007_usb_driver); - -MODULE_AUTHOR("Henry Wang <Henry.wang@AzureWave.com>"); -MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); -MODULE_DESCRIPTION("Driver for AzureWave 6007 DVB-C/T USB2.0 and clones"); -MODULE_VERSION("2.0"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE(AZ6007_FIRMWARE); diff --git a/drivers/media/dvb/dvb-usb-v2/ce6230.c b/drivers/media/dvb/dvb-usb-v2/ce6230.c deleted file mode 100644 index 84ff4a96ca4e..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/ce6230.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Intel CE6230 DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include "ce6230.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) -{ - int ret; - unsigned int pipe; - u8 request; - u8 requesttype; - u16 value; - u16 index; - u8 *buf; - - request = req->cmd; - value = req->value; - index = req->index; - - switch (req->cmd) { - case I2C_READ: - case DEMOD_READ: - case REG_READ: - requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); - break; - case I2C_WRITE: - case DEMOD_WRITE: - case REG_WRITE: - requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); - break; - default: - pr_debug("%s: unknown command=%02x\n", __func__, req->cmd); - ret = -EINVAL; - goto error; - } - - buf = kmalloc(req->data_len, GFP_KERNEL); - if (!buf) { - ret = -ENOMEM; - goto error; - } - - if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { - /* write */ - memcpy(buf, req->data, req->data_len); - pipe = usb_sndctrlpipe(d->udev, 0); - } else { - /* read */ - pipe = usb_rcvctrlpipe(d->udev, 0); - } - - msleep(1); /* avoid I2C errors */ - - ret = usb_control_msg(d->udev, pipe, request, requesttype, value, index, - buf, req->data_len, CE6230_USB_TIMEOUT); - - ce6230_debug_dump(request, requesttype, value, index, buf, - req->data_len); - - if (ret < 0) - pr_err("%s: usb_control_msg() failed=%d\n", KBUILD_MODNAME, - ret); - else - ret = 0; - - /* read request, copy returned data to return buf */ - if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) - memcpy(req->data, buf, req->data_len); - - kfree(buf); -error: - return ret; -} - -/* I2C */ -static struct zl10353_config ce6230_zl10353_config; - -static int ce6230_i2c_master_xfer(struct i2c_adapter *adap, - struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int ret = 0, i = 0; - struct usb_req req; - - if (num > 2) - return -EOPNOTSUPP; - - memset(&req, 0, sizeof(req)); - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - while (i < num) { - if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { - if (msg[i].addr == - ce6230_zl10353_config.demod_address) { - req.cmd = DEMOD_READ; - req.value = msg[i].addr >> 1; - req.index = msg[i].buf[0]; - req.data_len = msg[i+1].len; - req.data = &msg[i+1].buf[0]; - ret = ce6230_ctrl_msg(d, &req); - } else { - pr_err("%s: I2C read not implemented\n", - KBUILD_MODNAME); - ret = -EOPNOTSUPP; - } - i += 2; - } else { - if (msg[i].addr == - ce6230_zl10353_config.demod_address) { - req.cmd = DEMOD_WRITE; - req.value = msg[i].addr >> 1; - req.index = msg[i].buf[0]; - req.data_len = msg[i].len-1; - req.data = &msg[i].buf[1]; - ret = ce6230_ctrl_msg(d, &req); - } else { - req.cmd = I2C_WRITE; - req.value = 0x2000 + (msg[i].addr >> 1); - req.index = 0x0000; - req.data_len = msg[i].len; - req.data = &msg[i].buf[0]; - ret = ce6230_ctrl_msg(d, &req); - } - i += 1; - } - if (ret) - break; - } - - mutex_unlock(&d->i2c_mutex); - return ret ? ret : i; -} - -static u32 ce6230_i2c_functionality(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm ce6230_i2c_algorithm = { - .master_xfer = ce6230_i2c_master_xfer, - .functionality = ce6230_i2c_functionality, -}; - -/* Callbacks for DVB USB */ -static struct zl10353_config ce6230_zl10353_config = { - .demod_address = 0x1e, - .adc_clock = 450000, - .if2 = 45700, - .no_tuner = 1, - .parallel_ts = 1, - .clock_ctl_1 = 0x34, - .pll_0 = 0x0e, -}; - -static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap) -{ - pr_debug("%s:\n", __func__); - - adap->fe[0] = dvb_attach(zl10353_attach, &ce6230_zl10353_config, - &adap_to_d(adap)->i2c_adap); - if (adap->fe[0] == NULL) - return -ENODEV; - - return 0; -} - -static struct mxl5005s_config ce6230_mxl5003s_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_DEFAULT, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) -{ - int ret; - - pr_debug("%s:\n", __func__); - - ret = dvb_attach(mxl5005s_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &ce6230_mxl5003s_config) == NULL ? -ENODEV : 0; - return ret; -} - -static int ce6230_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - int ret; - - pr_debug("%s: onoff=%d\n", __func__, onoff); - - /* InterfaceNumber 1 / AlternateSetting 0 idle - InterfaceNumber 1 / AlternateSetting 1 streaming */ - ret = usb_set_interface(d->udev, 1, onoff); - if (ret) - pr_err("%s: usb_set_interface() failed=%d\n", KBUILD_MODNAME, - ret); - - return ret; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties ce6230_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .bInterfaceNumber = 1, - - .i2c_algo = &ce6230_i2c_algorithm, - .power_ctrl = ce6230_power_ctrl, - .frontend_attach = ce6230_zl10353_frontend_attach, - .tuner_attach = ce6230_mxl5003s_tuner_attach, - - .num_adapters = 1, - .adapter = { - { - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = (16 * 512), - } - } - }, - } - }, -}; - -static const struct usb_device_id ce6230_id_table[] = { - { DVB_USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500, - &ce6230_props, "Intel CE9500 reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310, - &ce6230_props, "AVerMedia A310 USB 2.0 DVB-T tuner", NULL) }, - { } -}; -MODULE_DEVICE_TABLE(usb, ce6230_id_table); - -static struct usb_driver ce6230_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = ce6230_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(ce6230_usb_driver); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Intel CE6230 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/ce6230.h b/drivers/media/dvb/dvb-usb-v2/ce6230.h deleted file mode 100644 index 42d754494a3a..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/ce6230.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Intel CE6230 DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef CE6230_H -#define CE6230_H - -#include "dvb_usb.h" -#include "zl10353.h" -#include "mxl5005s.h" - -#define ce6230_debug_dump(r, t, v, i, b, l) { \ - char *direction; \ - if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ - direction = ">>>"; \ - else \ - direction = "<<<"; \ - pr_debug("%s: %02x %02x %02x %02x %02x %02x %02x %02x %s [%d bytes]\n", \ - __func__, t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, \ - l & 0xff, l >> 8, direction, l); \ -} - -#define CE6230_USB_TIMEOUT 1000 - -struct usb_req { - u8 cmd; /* [1] */ - u16 value; /* [2|3] */ - u16 index; /* [4|5] */ - u16 data_len; /* [6|7] */ - u8 *data; -}; - -enum ce6230_cmd { - CONFIG_READ = 0xd0, /* rd 0 (unclear) */ - UNKNOWN_WRITE = 0xc7, /* wr 7 (unclear) */ - I2C_READ = 0xd9, /* rd 9 (unclear) */ - I2C_WRITE = 0xca, /* wr a */ - DEMOD_READ = 0xdb, /* rd b */ - DEMOD_WRITE = 0xcc, /* wr c */ - REG_READ = 0xde, /* rd e */ - REG_WRITE = 0xcf, /* wr f */ -}; - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/cypress_firmware.c b/drivers/media/dvb/dvb-usb-v2/cypress_firmware.c deleted file mode 100644 index 9f7c970c6424..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/cypress_firmware.c +++ /dev/null @@ -1,125 +0,0 @@ -/* cypress_firmware.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for downloading the firmware to Cypress FX 1 - * and 2 based devices. - * - */ - -#include "dvb_usb.h" -#include "cypress_firmware.h" - -struct usb_cypress_controller { - u8 id; - const char *name; /* name of the usb controller */ - u16 cs_reg; /* needs to be restarted, - * when the firmware has been downloaded */ -}; - -static const struct usb_cypress_controller cypress[] = { - { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cs_reg = 0x7f92 }, - { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cs_reg = 0x7f92 }, - { .id = CYPRESS_FX2, .name = "Cypress FX2", .cs_reg = 0xe600 }, -}; - -/* - * load a firmware packet to the device - */ -static int usb_cypress_writemem(struct usb_device *udev, u16 addr, u8 *data, - u8 len) -{ - return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); -} - -int usbv2_cypress_load_firmware(struct usb_device *udev, - const struct firmware *fw, int type) -{ - struct hexline hx; - u8 reset; - int ret, pos = 0; - - /* stop the CPU */ - reset = 1; - ret = usb_cypress_writemem(udev, cypress[type].cs_reg, &reset, 1); - if (ret != 1) - pr_err("%s: could not stop the USB controller CPU", - KBUILD_MODNAME); - - while ((ret = dvb_usbv2_get_hexline(fw, &hx, &pos)) > 0) { - pr_debug("%s: writing to address %04x (buffer: %02x %02x)\n", - __func__, hx.addr, hx.len, hx.chk); - - ret = usb_cypress_writemem(udev, hx.addr, hx.data, hx.len); - if (ret != hx.len) { - pr_err("%s: error while transferring firmware " \ - "(transferred size=%d, block size=%d)", - KBUILD_MODNAME, ret, hx.len); - ret = -EINVAL; - break; - } - } - if (ret < 0) { - pr_err("%s: firmware download failed at %d with %d", - KBUILD_MODNAME, pos, ret); - return ret; - } - - if (ret == 0) { - /* restart the CPU */ - reset = 0; - if (ret || usb_cypress_writemem( - udev, cypress[type].cs_reg, &reset, 1) != 1) { - pr_err("%s: could not restart the USB controller CPU", - KBUILD_MODNAME); - ret = -EINVAL; - } - } else - ret = -EIO; - - return ret; -} -EXPORT_SYMBOL(usbv2_cypress_load_firmware); - -int dvb_usbv2_get_hexline(const struct firmware *fw, struct hexline *hx, - int *pos) -{ - u8 *b = (u8 *) &fw->data[*pos]; - int data_offs = 4; - - if (*pos >= fw->size) - return 0; - - memset(hx, 0, sizeof(struct hexline)); - - hx->len = b[0]; - - if ((*pos + hx->len + 4) >= fw->size) - return -EINVAL; - - hx->addr = b[1] | (b[2] << 8); - hx->type = b[3]; - - if (hx->type == 0x04) { - /* b[4] and b[5] are the Extended linear address record data - * field */ - hx->addr |= (b[4] << 24) | (b[5] << 16); - /* - hx->len -= 2; - data_offs += 2; - */ - } - memcpy(hx->data, &b[data_offs], hx->len); - hx->chk = b[hx->len + data_offs]; - - *pos += hx->len + 5; - - return *pos; -} -EXPORT_SYMBOL(dvb_usbv2_get_hexline); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Cypress firmware download"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/cypress_firmware.h b/drivers/media/dvb/dvb-usb-v2/cypress_firmware.h deleted file mode 100644 index 80085fd4132c..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/cypress_firmware.h +++ /dev/null @@ -1,31 +0,0 @@ -/* cypress_firmware.h is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for downloading the firmware to Cypress FX 1 - * and 2 based devices. - * - */ - -#ifndef CYPRESS_FIRMWARE_H -#define CYPRESS_FIRMWARE_H - -#define CYPRESS_AN2135 0 -#define CYPRESS_AN2235 1 -#define CYPRESS_FX2 2 - -/* commonly used firmware download types and function */ -struct hexline { - u8 len; - u32 addr; - u8 type; - u8 data[255]; - u8 chk; -}; -extern int usbv2_cypress_load_firmware(struct usb_device *, - const struct firmware *, int); -extern int dvb_usbv2_get_hexline(const struct firmware *, - struct hexline *, int *); - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/dvb_usb.h b/drivers/media/dvb/dvb-usb-v2/dvb_usb.h deleted file mode 100644 index 79b3b8b6750d..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/dvb_usb.h +++ /dev/null @@ -1,389 +0,0 @@ -/* - * DVB USB framework - * - * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de> - * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef DVB_USB_H -#define DVB_USB_H - -#include <linux/usb/input.h> -#include <linux/firmware.h> -#include <media/rc-core.h> - -#include "dvb_frontend.h" -#include "dvb_demux.h" -#include "dvb_net.h" -#include "dmxdev.h" -#include "dvb-usb-ids.h" - -/* - * device file: /dev/dvb/adapter[0-1]/frontend[0-2] - * - * |-- device - * | |-- adapter0 - * | | |-- frontend0 - * | | |-- frontend1 - * | | `-- frontend2 - * | `-- adapter1 - * | |-- frontend0 - * | |-- frontend1 - * | `-- frontend2 - * - * - * Commonly used variable names: - * d = pointer to device (struct dvb_usb_device *) - * adap = pointer to adapter (struct dvb_usb_adapter *) - * fe = pointer to frontend (struct dvb_frontend *) - * - * Use macros defined in that file to resolve needed pointers. - */ - -/* helper macros for every DVB USB driver use */ -#define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \ - adapter[adap->id])) -#define adap_to_priv(adap) (adap_to_d(adap)->priv) -#define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv)) -#define fe_to_d(fe) (adap_to_d(fe_to_adap(fe))) -#define fe_to_priv(fe) (fe_to_d(fe)->priv) -#define d_to_priv(d) (d->priv) - -#define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \ - .type = USB_BULK, \ - .count = count_, \ - .endpoint = endpoint_, \ - .u = { \ - .bulk = { \ - .buffersize = size_, \ - } \ - } \ -} - -#define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \ - .type = USB_ISOC, \ - .count = count_, \ - .endpoint = endpoint_, \ - .u = { \ - .isoc = { \ - .framesperurb = frames_, \ - .framesize = size_,\ - .interval = interval_, \ - } \ - } \ -} - -#define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \ - .props = (props_), \ - .name = (name_), \ - .rc_map = (rc), \ - }) - -struct dvb_usb_device; -struct dvb_usb_adapter; - -/** - * structure for carrying all needed data from the device driver to the general - * dvb usb routines - * @name: device name - * @rc_map: name of rc codes table - * @props: structure containing all device properties - */ -struct dvb_usb_driver_info { - const char *name; - const char *rc_map; - const struct dvb_usb_device_properties *props; -}; - -/** - * structure for remote controller configuration - * @map_name: name of rc codes table - * @allowed_protos: protocol(s) supported by the driver - * @change_protocol: callback to change protocol - * @query: called to query an event from the device - * @interval: time in ms between two queries - * @driver_type: used to point if a device supports raw mode - * @bulk_mode: device supports bulk mode for rc (disable polling mode) - */ -struct dvb_usb_rc { - const char *map_name; - u64 allowed_protos; - int (*change_protocol)(struct rc_dev *dev, u64 rc_type); - int (*query) (struct dvb_usb_device *d); - unsigned int interval; - const enum rc_driver_type driver_type; - bool bulk_mode; -}; - -/** - * usb streaming configration for adapter - * @type: urb type - * @count: count of used urbs - * @endpoint: stream usb endpoint number - */ -struct usb_data_stream_properties { -#define USB_BULK 1 -#define USB_ISOC 2 - u8 type; - u8 count; - u8 endpoint; - - union { - struct { - unsigned int buffersize; /* per URB */ - } bulk; - struct { - int framesperurb; - int framesize; - int interval; - } isoc; - } u; -}; - -/** - * properties of dvb usb device adapter - * @caps: adapter capabilities - * @pid_filter_count: pid count of adapter pid-filter - * @pid_filter_ctrl: called to enable/disable pid-filter - * @pid_filter: called to set/unset pid for filtering - * @stream: adapter usb stream configuration - */ -#define MAX_NO_OF_FE_PER_ADAP 3 -struct dvb_usb_adapter_properties { -#define DVB_USB_ADAP_HAS_PID_FILTER 0x01 -#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02 -#define DVB_USB_ADAP_NEED_PID_FILTERING 0x04 - u8 caps; - - u8 pid_filter_count; - int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int); - int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int); - - struct usb_data_stream_properties stream; -}; - -/** - * struct dvb_usb_device_properties - properties of a dvb-usb-device - * @driver_name: name of the owning driver module - * @owner: owner of the dvb_adapter - * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro - * @bInterfaceNumber: usb interface number driver binds - * @size_of_priv: bytes allocated for the driver private data - * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent - * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for - * receive - * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message - * @identify_state: called to determine the firmware state (cold or warm) and - * return possible firmware file name to be loaded - * @firmware: name of the firmware file to be loaded - * @download_firmware: called to download the firmware - * @i2c_algo: i2c_algorithm if the device has i2c-adapter - * @num_adapters: dvb usb device adapter count - * @get_adapter_count: called to resolve adapter count - * @adapter: array of all adapter properties of device - * @power_ctrl: called to enable/disable power of the device - * @read_config: called to resolve device configuration - * @read_mac_address: called to resolve adapter mac-address - * @frontend_attach: called to attach the possible frontends - * @tuner_attach: called to attach the possible tuners - * @frontend_ctrl: called to power on/off active frontend - * @streaming_ctrl: called to start/stop the usb streaming of adapter - * @init: called after adapters are created in order to finalize device - * configuration - * @exit: called when driver is unloaded - * @get_rc_config: called to resolve used remote controller configuration - * @get_stream_config: called to resolve input and output stream configuration - * of the adapter just before streaming is started. input stream is transport - * stream from the demodulator and output stream is usb stream to host. - */ -#define MAX_NO_OF_ADAPTER_PER_DEVICE 2 -struct dvb_usb_device_properties { - const char *driver_name; - struct module *owner; - short *adapter_nr; - - u8 bInterfaceNumber; - unsigned int size_of_priv; - u8 generic_bulk_ctrl_endpoint; - u8 generic_bulk_ctrl_endpoint_response; - unsigned int generic_bulk_ctrl_delay; - -#define WARM 0 -#define COLD 1 - int (*identify_state) (struct dvb_usb_device *, const char **); - const char *firmware; -#define RECONNECTS_USB 1 - int (*download_firmware) (struct dvb_usb_device *, - const struct firmware *); - - struct i2c_algorithm *i2c_algo; - - unsigned int num_adapters; - int (*get_adapter_count) (struct dvb_usb_device *); - struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; - int (*power_ctrl) (struct dvb_usb_device *, int); - int (*read_config) (struct dvb_usb_device *d); - int (*read_mac_address) (struct dvb_usb_adapter *, u8 []); - int (*frontend_attach) (struct dvb_usb_adapter *); - int (*tuner_attach) (struct dvb_usb_adapter *); - int (*frontend_ctrl) (struct dvb_frontend *, int); - int (*streaming_ctrl) (struct dvb_frontend *, int); - int (*init) (struct dvb_usb_device *); - void (*exit) (struct dvb_usb_device *); - int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *); -#define DVB_USB_FE_TS_TYPE_188 0 -#define DVB_USB_FE_TS_TYPE_204 1 -#define DVB_USB_FE_TS_TYPE_RAW 2 - int (*get_stream_config) (struct dvb_frontend *, u8 *, - struct usb_data_stream_properties *); -}; - -/** - * generic object of an usb stream - * @buf_num: number of buffer allocated - * @buf_size: size of each buffer in buf_list - * @buf_list: array containing all allocate buffers for streaming - * @dma_addr: list of dma_addr_t for each buffer in buf_list - * - * @urbs_initialized: number of URBs initialized - * @urbs_submitted: number of URBs submitted - */ -#define MAX_NO_URBS_FOR_DATA_STREAM 10 -struct usb_data_stream { - struct usb_device *udev; - struct usb_data_stream_properties props; - -#define USB_STATE_INIT 0x00 -#define USB_STATE_URB_BUF 0x01 - u8 state; - - void (*complete) (struct usb_data_stream *, u8 *, size_t); - - struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM]; - int buf_num; - unsigned long buf_size; - u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM]; - dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM]; - - int urbs_initialized; - int urbs_submitted; - - void *user_priv; -}; - -/** - * dvb adapter object on dvb usb device - * @props: pointer to adapter properties - * @stream: adapter the usb data stream - * @id: index of this adapter (starting with 0) - * @ts_type: transport stream, input stream, type - * @pid_filtering: is hardware pid_filtering used or not - * @feed_count: current feed count - * @max_feed_count: maimum feed count device can handle - * @dvb_adap: adapter dvb_adapter - * @dmxdev: adapter dmxdev - * @demux: adapter software demuxer - * @dvb_net: adapter dvb_net interfaces - * @sync_mutex: mutex used to sync control and streaming of the adapter - * @fe: adapter frontends - * @fe_init: rerouted frontend-init function - * @fe_sleep: rerouted frontend-sleep function - */ -struct dvb_usb_adapter { - const struct dvb_usb_adapter_properties *props; - struct usb_data_stream stream; - u8 id; - u8 ts_type; - bool pid_filtering; - u8 feed_count; - u8 max_feed_count; - s8 active_fe; - - /* dvb */ - struct dvb_adapter dvb_adap; - struct dmxdev dmxdev; - struct dvb_demux demux; - struct dvb_net dvb_net; - struct mutex sync_mutex; - - struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP]; - int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); - int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); -}; - -/** - * dvb usb device object - * @props: device properties - * @name: device name - * @rc_map: name of rc codes table - * @udev: pointer to the device's struct usb_device - * @intf: pointer to the device's usb interface - * @rc: remote controller configuration - * @probe_work: work to defer .probe() - * @powered: indicated whether the device is power or not - * @usb_mutex: mutex for usb control messages - * @i2c_mutex: mutex for i2c-transfers - * @i2c_adap: device's i2c-adapter - * @rc_dev: rc device for the remote control - * @rc_query_work: work for polling remote - * @priv: private data of the actual driver (allocate by dvb usb, size defined - * in size_of_priv of dvb_usb_properties). - */ -struct dvb_usb_device { - const struct dvb_usb_device_properties *props; - const char *name; - const char *rc_map; - - struct usb_device *udev; - struct usb_interface *intf; - struct dvb_usb_rc rc; - struct work_struct probe_work; - pid_t work_pid; - int powered; - - /* locking */ - struct mutex usb_mutex; - - /* i2c */ - struct mutex i2c_mutex; - struct i2c_adapter i2c_adap; - - struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; - - /* remote control */ - struct rc_dev *rc_dev; - char rc_phys[64]; - struct delayed_work rc_query_work; - - void *priv; -}; - -extern int dvb_usbv2_probe(struct usb_interface *, - const struct usb_device_id *); -extern void dvb_usbv2_disconnect(struct usb_interface *); -extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t); -extern int dvb_usbv2_resume(struct usb_interface *); - -/* the generic read/write method for device control */ -extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16); -extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16); - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/dvb_usb_common.h b/drivers/media/dvb/dvb-usb-v2/dvb_usb_common.h deleted file mode 100644 index 45f07090d431..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/dvb_usb_common.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * DVB USB framework - * - * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de> - * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef DVB_USB_COMMON_H -#define DVB_USB_COMMON_H - -#include "dvb_usb.h" - -/* commonly used methods */ -extern int usb_urb_initv2(struct usb_data_stream *stream, - const struct usb_data_stream_properties *props); -extern int usb_urb_exitv2(struct usb_data_stream *stream); -extern int usb_urb_submitv2(struct usb_data_stream *stream, - struct usb_data_stream_properties *props); -extern int usb_urb_killv2(struct usb_data_stream *stream); - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/dvb/dvb-usb-v2/dvb_usb_core.c deleted file mode 100644 index a72f9c7de682..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/dvb_usb_core.c +++ /dev/null @@ -1,997 +0,0 @@ -/* - * DVB USB framework - * - * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de> - * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include "dvb_usb_common.h" - -int dvb_usbv2_disable_rc_polling; -module_param_named(disable_rc_polling, dvb_usbv2_disable_rc_polling, int, 0644); -MODULE_PARM_DESC(disable_rc_polling, - "disable remote control polling (default: 0)"); -static int dvb_usb_force_pid_filter_usage; -module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, - int, 0444); -MODULE_PARM_DESC(force_pid_filter_usage, "force all DVB USB devices to use a " \ - "PID filter, if any (default: 0)"); - -static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, const char *name) -{ - int ret; - const struct firmware *fw; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - if (!d->props->download_firmware) { - ret = -EINVAL; - goto err; - } - - ret = request_firmware(&fw, name, &d->udev->dev); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: Did not find the firmware file "\ - "'%s'. Please see linux/Documentation/dvb/ " \ - "for more details on firmware-problems. " \ - "Status %d\n", KBUILD_MODNAME, name, ret); - goto err; - } - - dev_info(&d->udev->dev, "%s: downloading firmware from file '%s'\n", - KBUILD_MODNAME, name); - - ret = d->props->download_firmware(d, fw); - release_firmware(fw); - if (ret < 0) - goto err; - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usbv2_i2c_init(struct dvb_usb_device *d) -{ - int ret; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - if (!d->props->i2c_algo) - return 0; - - strlcpy(d->i2c_adap.name, d->name, sizeof(d->i2c_adap.name)); - d->i2c_adap.algo = d->props->i2c_algo; - d->i2c_adap.dev.parent = &d->udev->dev; - i2c_set_adapdata(&d->i2c_adap, d); - - ret = i2c_add_adapter(&d->i2c_adap); - if (ret < 0) { - d->i2c_adap.algo = NULL; - dev_err(&d->udev->dev, "%s: i2c_add_adapter() failed=%d\n", - KBUILD_MODNAME, ret); - goto err; - } - - return 0; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usbv2_i2c_exit(struct dvb_usb_device *d) -{ - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - if (d->i2c_adap.algo) - i2c_del_adapter(&d->i2c_adap); - - return 0; -} - -static void dvb_usb_read_remote_control(struct work_struct *work) -{ - struct dvb_usb_device *d = container_of(work, - struct dvb_usb_device, rc_query_work.work); - int ret; - - /* - * When the parameter has been set to 1 via sysfs while the - * driver was running, or when bulk mode is enabled after IR init. - */ - if (dvb_usbv2_disable_rc_polling || d->rc.bulk_mode) - return; - - ret = d->rc.query(d); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: rc.query() failed=%d\n", - KBUILD_MODNAME, ret); - return; /* stop polling */ - } - - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(d->rc.interval)); -} - -static int dvb_usbv2_remote_init(struct dvb_usb_device *d) -{ - int ret; - struct rc_dev *dev; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - if (dvb_usbv2_disable_rc_polling || !d->props->get_rc_config) - return 0; - - d->rc.map_name = d->rc_map; - ret = d->props->get_rc_config(d, &d->rc); - if (ret < 0) - goto err; - - /* disable rc when there is no keymap defined */ - if (!d->rc.map_name) - return 0; - - dev = rc_allocate_device(); - if (!dev) { - ret = -ENOMEM; - goto err; - } - - dev->dev.parent = &d->udev->dev; - dev->input_name = d->name; - usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); - strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); - dev->input_phys = d->rc_phys; - usb_to_input_id(d->udev, &dev->input_id); - /* TODO: likely RC-core should took const char * */ - dev->driver_name = (char *) d->props->driver_name; - dev->map_name = d->rc.map_name; - dev->driver_type = d->rc.driver_type; - dev->allowed_protos = d->rc.allowed_protos; - dev->change_protocol = d->rc.change_protocol; - dev->priv = d; - - ret = rc_register_device(dev); - if (ret < 0) { - rc_free_device(dev); - goto err; - } - - d->rc_dev = dev; - - /* start polling if needed */ - if (d->rc.query && !d->rc.bulk_mode) { - /* initialize a work queue for handling polling */ - INIT_DELAYED_WORK(&d->rc_query_work, - dvb_usb_read_remote_control); - dev_info(&d->udev->dev, "%s: schedule remote query interval " \ - "to %d msecs\n", KBUILD_MODNAME, - d->rc.interval); - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(d->rc.interval)); - } - - return 0; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usbv2_remote_exit(struct dvb_usb_device *d) -{ - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - if (d->rc_dev) { - cancel_delayed_work_sync(&d->rc_query_work); - rc_unregister_device(d->rc_dev); - d->rc_dev = NULL; - } - - return 0; -} - -static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buf, - size_t len) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - dvb_dmx_swfilter(&adap->demux, buf, len); -} - -static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buf, - size_t len) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - dvb_dmx_swfilter_204(&adap->demux, buf, len); -} - -static void dvb_usb_data_complete_raw(struct usb_data_stream *stream, u8 *buf, - size_t len) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - dvb_dmx_swfilter_raw(&adap->demux, buf, len); -} - -int dvb_usbv2_adapter_stream_init(struct dvb_usb_adapter *adap) -{ - dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, - adap->id); - - adap->stream.udev = adap_to_d(adap)->udev; - adap->stream.user_priv = adap; - adap->stream.complete = dvb_usb_data_complete; - - return usb_urb_initv2(&adap->stream, &adap->props->stream); -} - -int dvb_usbv2_adapter_stream_exit(struct dvb_usb_adapter *adap) -{ - dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, - adap->id); - - return usb_urb_exitv2(&adap->stream); -} - -static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, - int count) -{ - struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; - struct dvb_usb_device *d = adap_to_d(adap); - int ret; - dev_dbg(&d->udev->dev, "%s: adap=%d active_fe=%d feed_type=%d " \ - "setting pid [%s]: %04x (%04d) at index %d '%s'\n", - __func__, adap->id, adap->active_fe, dvbdmxfeed->type, - adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid, - dvbdmxfeed->pid, dvbdmxfeed->index, - (count == 1) ? "on" : "off"); - - if (adap->active_fe == -1) - return -EINVAL; - - adap->feed_count += count; - - /* stop feeding if it is last pid */ - if (adap->feed_count == 0) { - dev_dbg(&d->udev->dev, "%s: stop feeding\n", __func__); - usb_urb_killv2(&adap->stream); - - if (d->props->streaming_ctrl) { - ret = d->props->streaming_ctrl( - adap->fe[adap->active_fe], 0); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: streaming_ctrl() " \ - "failed=%d\n", KBUILD_MODNAME, - ret); - goto err_mutex_unlock; - } - } - mutex_unlock(&adap->sync_mutex); - } - - /* activate the pid on the device pid filter */ - if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->pid_filtering && - adap->props->pid_filter) - ret = adap->props->pid_filter(adap, dvbdmxfeed->index, - dvbdmxfeed->pid, (count == 1) ? 1 : 0); - if (ret < 0) - dev_err(&d->udev->dev, "%s: pid_filter() " \ - "failed=%d\n", KBUILD_MODNAME, - ret); - - /* start feeding if it is first pid */ - if (adap->feed_count == 1 && count == 1) { - struct usb_data_stream_properties stream_props; - mutex_lock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: start feeding\n", __func__); - - /* resolve input and output streaming paramters */ - if (d->props->get_stream_config) { - memcpy(&stream_props, &adap->props->stream, - sizeof(struct usb_data_stream_properties)); - ret = d->props->get_stream_config( - adap->fe[adap->active_fe], - &adap->ts_type, &stream_props); - if (ret < 0) - goto err_mutex_unlock; - } else { - stream_props = adap->props->stream; - } - - switch (adap->ts_type) { - case DVB_USB_FE_TS_TYPE_204: - adap->stream.complete = dvb_usb_data_complete_204; - break; - case DVB_USB_FE_TS_TYPE_RAW: - adap->stream.complete = dvb_usb_data_complete_raw; - break; - case DVB_USB_FE_TS_TYPE_188: - default: - adap->stream.complete = dvb_usb_data_complete; - break; - } - - usb_urb_submitv2(&adap->stream, &stream_props); - - if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->props->caps & - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF && - adap->props->pid_filter_ctrl) { - ret = adap->props->pid_filter_ctrl(adap, - adap->pid_filtering); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: " \ - "pid_filter_ctrl() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_mutex_unlock; - } - } - - if (d->props->streaming_ctrl) { - ret = d->props->streaming_ctrl( - adap->fe[adap->active_fe], 1); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: streaming_ctrl() " \ - "failed=%d\n", KBUILD_MODNAME, - ret); - goto err_mutex_unlock; - } - } - } - - return 0; -err_mutex_unlock: - mutex_unlock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - return dvb_usb_ctrl_feed(dvbdmxfeed, 1); -} - -static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - return dvb_usb_ctrl_feed(dvbdmxfeed, -1); -} - -int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap) -{ - int ret; - struct dvb_usb_device *d = adap_to_d(adap); - dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id); - - ret = dvb_register_adapter(&adap->dvb_adap, d->name, d->props->owner, - &d->udev->dev, d->props->adapter_nr); - if (ret < 0) { - dev_dbg(&d->udev->dev, "%s: dvb_register_adapter() failed=%d\n", - __func__, ret); - goto err_dvb_register_adapter; - } - - adap->dvb_adap.priv = adap; - - if (d->props->read_mac_address) { - ret = d->props->read_mac_address(adap, - adap->dvb_adap.proposed_mac); - if (ret < 0) - goto err_dvb_dmx_init; - - dev_info(&d->udev->dev, "%s: MAC address: %pM\n", - KBUILD_MODNAME, adap->dvb_adap.proposed_mac); - } - - adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; - adap->demux.priv = adap; - adap->demux.filternum = 0; - adap->demux.filternum = adap->max_feed_count; - adap->demux.feednum = adap->demux.filternum; - adap->demux.start_feed = dvb_usb_start_feed; - adap->demux.stop_feed = dvb_usb_stop_feed; - adap->demux.write_to_decoder = NULL; - ret = dvb_dmx_init(&adap->demux); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: dvb_dmx_init() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_dvb_dmx_init; - } - - adap->dmxdev.filternum = adap->demux.filternum; - adap->dmxdev.demux = &adap->demux.dmx; - adap->dmxdev.capabilities = 0; - ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: dvb_dmxdev_init() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_dvb_dmxdev_init; - } - - ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, &adap->demux.dmx); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: dvb_net_init() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_dvb_net_init; - } - - mutex_init(&adap->sync_mutex); - - return 0; -err_dvb_net_init: - dvb_dmxdev_release(&adap->dmxdev); -err_dvb_dmxdev_init: - dvb_dmx_release(&adap->demux); -err_dvb_dmx_init: - dvb_unregister_adapter(&adap->dvb_adap); -err_dvb_register_adapter: - adap->dvb_adap.priv = NULL; - return ret; -} - -int dvb_usbv2_adapter_dvb_exit(struct dvb_usb_adapter *adap) -{ - dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, - adap->id); - - if (adap->dvb_adap.priv) { - dvb_net_release(&adap->dvb_net); - adap->demux.dmx.close(&adap->demux.dmx); - dvb_dmxdev_release(&adap->dmxdev); - dvb_dmx_release(&adap->demux); - dvb_unregister_adapter(&adap->dvb_adap); - } - - return 0; -} - -int dvb_usbv2_device_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - int ret; - - if (onoff) - d->powered++; - else - d->powered--; - - if (d->powered == 0 || (onoff && d->powered == 1)) { - /* when switching from 1 to 0 or from 0 to 1 */ - dev_dbg(&d->udev->dev, "%s: power=%d\n", __func__, onoff); - if (d->props->power_ctrl) { - ret = d->props->power_ctrl(d, onoff); - if (ret < 0) - goto err; - } - } - - return 0; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usb_fe_init(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap_to_d(adap); - mutex_lock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id, - fe->id); - - ret = dvb_usbv2_device_power_ctrl(d, 1); - if (ret < 0) - goto err; - - if (d->props->frontend_ctrl) { - ret = d->props->frontend_ctrl(fe, 1); - if (ret < 0) - goto err; - } - - if (adap->fe_init[fe->id]) { - ret = adap->fe_init[fe->id](fe); - if (ret < 0) - goto err; - } - - adap->active_fe = fe->id; - mutex_unlock(&adap->sync_mutex); - - return 0; -err: - mutex_unlock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usb_fe_sleep(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap_to_d(adap); - mutex_lock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: adap=%d fe=%d\n", __func__, adap->id, - fe->id); - - if (adap->fe_sleep[fe->id]) { - ret = adap->fe_sleep[fe->id](fe); - if (ret < 0) - goto err; - } - - if (d->props->frontend_ctrl) { - ret = d->props->frontend_ctrl(fe, 0); - if (ret < 0) - goto err; - } - - ret = dvb_usbv2_device_power_ctrl(d, 0); - if (ret < 0) - goto err; - - adap->active_fe = -1; - mutex_unlock(&adap->sync_mutex); - - return 0; -err: - mutex_unlock(&adap->sync_mutex); - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap) -{ - int ret, i, count_registered = 0; - struct dvb_usb_device *d = adap_to_d(adap); - dev_dbg(&d->udev->dev, "%s: adap=%d\n", __func__, adap->id); - - memset(adap->fe, 0, sizeof(adap->fe)); - adap->active_fe = -1; - - if (d->props->frontend_attach) { - ret = d->props->frontend_attach(adap); - if (ret < 0) { - dev_dbg(&d->udev->dev, "%s: frontend_attach() " \ - "failed=%d\n", __func__, ret); - goto err_dvb_frontend_detach; - } - } else { - dev_dbg(&d->udev->dev, "%s: frontend_attach() do not exists\n", - __func__); - ret = 0; - goto err; - } - - for (i = 0; i < MAX_NO_OF_FE_PER_ADAP && adap->fe[i]; i++) { - adap->fe[i]->id = i; - /* re-assign sleep and wakeup functions */ - adap->fe_init[i] = adap->fe[i]->ops.init; - adap->fe[i]->ops.init = dvb_usb_fe_init; - adap->fe_sleep[i] = adap->fe[i]->ops.sleep; - adap->fe[i]->ops.sleep = dvb_usb_fe_sleep; - - ret = dvb_register_frontend(&adap->dvb_adap, adap->fe[i]); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: frontend%d registration " \ - "failed\n", KBUILD_MODNAME, i); - goto err_dvb_unregister_frontend; - } - - count_registered++; - } - - if (d->props->tuner_attach) { - ret = d->props->tuner_attach(adap); - if (ret < 0) { - dev_dbg(&d->udev->dev, "%s: tuner_attach() failed=%d\n", - __func__, ret); - goto err_dvb_unregister_frontend; - } - } - - return 0; - -err_dvb_unregister_frontend: - for (i = count_registered - 1; i >= 0; i--) - dvb_unregister_frontend(adap->fe[i]); - -err_dvb_frontend_detach: - for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { - if (adap->fe[i]) - dvb_frontend_detach(adap->fe[i]); - } - -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -int dvb_usbv2_adapter_frontend_exit(struct dvb_usb_adapter *adap) -{ - int i; - dev_dbg(&adap_to_d(adap)->udev->dev, "%s: adap=%d\n", __func__, - adap->id); - - for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { - if (adap->fe[i]) { - dvb_unregister_frontend(adap->fe[i]); - dvb_frontend_detach(adap->fe[i]); - } - } - - return 0; -} - -static int dvb_usbv2_adapter_init(struct dvb_usb_device *d) -{ - struct dvb_usb_adapter *adap; - int ret, i, adapter_count; - - /* resolve adapter count */ - adapter_count = d->props->num_adapters; - if (d->props->get_adapter_count) { - ret = d->props->get_adapter_count(d); - if (ret < 0) - goto err; - - adapter_count = ret; - } - - for (i = 0; i < adapter_count; i++) { - adap = &d->adapter[i]; - adap->id = i; - adap->props = &d->props->adapter[i]; - - /* speed - when running at FULL speed we need a HW PID filter */ - if (d->udev->speed == USB_SPEED_FULL && - !(adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) { - dev_err(&d->udev->dev, "%s: this USB2.0 device " \ - "cannot be run on a USB1.1 port (it " \ - "lacks a hardware PID filter)\n", - KBUILD_MODNAME); - ret = -ENODEV; - goto err; - } else if ((d->udev->speed == USB_SPEED_FULL && - adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) || - (adap->props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { - dev_info(&d->udev->dev, "%s: will use the device's " \ - "hardware PID filter " \ - "(table count: %d)\n", KBUILD_MODNAME, - adap->props->pid_filter_count); - adap->pid_filtering = 1; - adap->max_feed_count = adap->props->pid_filter_count; - } else { - dev_info(&d->udev->dev, "%s: will pass the complete " \ - "MPEG2 transport stream to the " \ - "software demuxer\n", KBUILD_MODNAME); - adap->pid_filtering = 0; - adap->max_feed_count = 255; - } - - if (!adap->pid_filtering && dvb_usb_force_pid_filter_usage && - adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER) { - dev_info(&d->udev->dev, "%s: PID filter enabled by " \ - "module option\n", KBUILD_MODNAME); - adap->pid_filtering = 1; - adap->max_feed_count = adap->props->pid_filter_count; - } - - ret = dvb_usbv2_adapter_stream_init(adap); - if (ret) - goto err; - - ret = dvb_usbv2_adapter_dvb_init(adap); - if (ret) - goto err; - - ret = dvb_usbv2_adapter_frontend_init(adap); - if (ret) - goto err; - - /* use exclusive FE lock if there is multiple shared FEs */ - if (adap->fe[1]) - adap->dvb_adap.mfe_shared = 1; - } - - return 0; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usbv2_adapter_exit(struct dvb_usb_device *d) -{ - int i; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) { - if (d->adapter[i].props) { - dvb_usbv2_adapter_frontend_exit(&d->adapter[i]); - dvb_usbv2_adapter_dvb_exit(&d->adapter[i]); - dvb_usbv2_adapter_stream_exit(&d->adapter[i]); - } - } - - return 0; -} - -/* general initialization functions */ -static int dvb_usbv2_exit(struct dvb_usb_device *d) -{ - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - dvb_usbv2_remote_exit(d); - dvb_usbv2_adapter_exit(d); - dvb_usbv2_i2c_exit(d); - kfree(d->priv); - kfree(d); - - return 0; -} - -static int dvb_usbv2_init(struct dvb_usb_device *d) -{ - int ret; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - dvb_usbv2_device_power_ctrl(d, 1); - - if (d->props->read_config) { - ret = d->props->read_config(d); - if (ret < 0) - goto err; - } - - ret = dvb_usbv2_i2c_init(d); - if (ret < 0) - goto err; - - ret = dvb_usbv2_adapter_init(d); - if (ret < 0) - goto err; - - if (d->props->init) { - ret = d->props->init(d); - if (ret < 0) - goto err; - } - - ret = dvb_usbv2_remote_init(d); - if (ret < 0) - goto err; - - dvb_usbv2_device_power_ctrl(d, 0); - - return 0; -err: - dvb_usbv2_device_power_ctrl(d, 0); - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -/* - * udev, which is used for the firmware downloading, requires we cannot - * block during module_init(). module_init() calls USB probe() which - * is this routine. Due to that we delay actual operation using workqueue - * and return always success here. - */ -static void dvb_usbv2_init_work(struct work_struct *work) -{ - int ret; - struct dvb_usb_device *d = - container_of(work, struct dvb_usb_device, probe_work); - - d->work_pid = current->pid; - dev_dbg(&d->udev->dev, "%s: work_pid=%d\n", __func__, d->work_pid); - - if (d->props->size_of_priv) { - d->priv = kzalloc(d->props->size_of_priv, GFP_KERNEL); - if (!d->priv) { - dev_err(&d->udev->dev, "%s: kzalloc() failed\n", - KBUILD_MODNAME); - ret = -ENOMEM; - goto err_usb_driver_release_interface; - } - } - - if (d->props->identify_state) { - const char *name = NULL; - ret = d->props->identify_state(d, &name); - if (ret == 0) { - ; - } else if (ret == COLD) { - dev_info(&d->udev->dev, "%s: found a '%s' in cold " \ - "state\n", KBUILD_MODNAME, d->name); - - if (!name) - name = d->props->firmware; - - ret = dvb_usbv2_download_firmware(d, name); - if (ret == 0) { - /* device is warm, continue initialization */ - ; - } else if (ret == RECONNECTS_USB) { - /* - * USB core will call disconnect() and then - * probe() as device reconnects itself from the - * USB bus. disconnect() will release all driver - * resources and probe() is called for 'new' - * device. As 'new' device is warm we should - * never go here again. - */ - return; - } else { - /* - * Unexpected error. We must unregister driver - * manually from the device, because device is - * already register by returning from probe() - * with success. usb_driver_release_interface() - * finally calls disconnect() in order to free - * resources. - */ - goto err_usb_driver_release_interface; - } - } else { - goto err_usb_driver_release_interface; - } - } - - dev_info(&d->udev->dev, "%s: found a '%s' in warm state\n", - KBUILD_MODNAME, d->name); - - ret = dvb_usbv2_init(d); - if (ret < 0) - goto err_usb_driver_release_interface; - - dev_info(&d->udev->dev, "%s: '%s' successfully initialized and " \ - "connected\n", KBUILD_MODNAME, d->name); - - return; -err_usb_driver_release_interface: - dev_info(&d->udev->dev, "%s: '%s' error while loading driver (%d)\n", - KBUILD_MODNAME, d->name, ret); - usb_driver_release_interface(to_usb_driver(d->intf->dev.driver), - d->intf); - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return; -} - -int dvb_usbv2_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret; - struct dvb_usb_device *d; - struct usb_device *udev = interface_to_usbdev(intf); - struct dvb_usb_driver_info *driver_info = - (struct dvb_usb_driver_info *) id->driver_info; - - dev_dbg(&udev->dev, "%s: bInterfaceNumber=%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - if (!id->driver_info) { - dev_err(&udev->dev, "%s: driver_info failed\n", KBUILD_MODNAME); - ret = -ENODEV; - goto err; - } - - d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL); - if (!d) { - dev_err(&udev->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME); - ret = -ENOMEM; - goto err; - } - - d->name = driver_info->name; - d->rc_map = driver_info->rc_map; - d->udev = udev; - d->intf = intf; - d->props = driver_info->props; - - if (d->intf->cur_altsetting->desc.bInterfaceNumber != - d->props->bInterfaceNumber) { - ret = -ENODEV; - goto err_kfree; - } - - mutex_init(&d->usb_mutex); - mutex_init(&d->i2c_mutex); - INIT_WORK(&d->probe_work, dvb_usbv2_init_work); - usb_set_intfdata(intf, d); - ret = schedule_work(&d->probe_work); - if (ret < 0) { - dev_err(&d->udev->dev, "%s: schedule_work() failed\n", - KBUILD_MODNAME); - goto err_kfree; - } - - return 0; -err_kfree: - kfree(d); -err: - dev_dbg(&udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} -EXPORT_SYMBOL(dvb_usbv2_probe); - -void dvb_usbv2_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - const char *name = d->name; - struct device dev = d->udev->dev; - dev_dbg(&d->udev->dev, "%s: pid=%d work_pid=%d\n", __func__, - current->pid, d->work_pid); - - /* ensure initialization work is finished until release resources */ - if (d->work_pid != current->pid) - cancel_work_sync(&d->probe_work); - - if (d->props->exit) - d->props->exit(d); - - dvb_usbv2_exit(d); - - dev_info(&dev, "%s: '%s' successfully deinitialized and disconnected\n", - KBUILD_MODNAME, name); -} -EXPORT_SYMBOL(dvb_usbv2_disconnect); - -int dvb_usbv2_suspend(struct usb_interface *intf, pm_message_t msg) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - int i; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - /* stop remote controller poll */ - if (d->rc.query && !d->rc.bulk_mode) - cancel_delayed_work_sync(&d->rc_query_work); - - /* stop streaming */ - for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) { - if (d->adapter[i].dvb_adap.priv && - d->adapter[i].active_fe != -1) - usb_urb_killv2(&d->adapter[i].stream); - } - - return 0; -} -EXPORT_SYMBOL(dvb_usbv2_suspend); - -int dvb_usbv2_resume(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - int i; - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - /* start streaming */ - for (i = 0; i < MAX_NO_OF_ADAPTER_PER_DEVICE; i++) { - if (d->adapter[i].dvb_adap.priv && - d->adapter[i].active_fe != -1) - usb_urb_submitv2(&d->adapter[i].stream, NULL); - } - - /* start remote controller poll */ - if (d->rc.query && !d->rc.bulk_mode) - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(d->rc.interval)); - - return 0; -} -EXPORT_SYMBOL(dvb_usbv2_resume); - -MODULE_VERSION("2.0"); -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("DVB USB common"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c deleted file mode 100644 index 0431beed0ef4..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/dvb_usb_urb.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * DVB USB framework - * - * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de> - * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include "dvb_usb_common.h" - -int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, - u16 rlen) -{ - int ret, actual_length; - - if (!d || !wbuf || !wlen || !d->props->generic_bulk_ctrl_endpoint || - !d->props->generic_bulk_ctrl_endpoint_response) { - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, -EINVAL); - return -EINVAL; - } - - ret = mutex_lock_interruptible(&d->usb_mutex); - if (ret < 0) - return ret; - - dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); - - ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, - d->props->generic_bulk_ctrl_endpoint), wbuf, wlen, - &actual_length, 2000); - if (ret < 0) - dev_err(&d->udev->dev, "%s: usb_bulk_msg() failed=%d\n", - KBUILD_MODNAME, ret); - else - ret = actual_length != wlen ? -EIO : 0; - - /* an answer is expected, and no error before */ - if (!ret && rbuf && rlen) { - if (d->props->generic_bulk_ctrl_delay) - usleep_range(d->props->generic_bulk_ctrl_delay, - d->props->generic_bulk_ctrl_delay - + 20000); - - ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, - d->props->generic_bulk_ctrl_endpoint_response), - rbuf, rlen, &actual_length, 2000); - if (ret) - dev_err(&d->udev->dev, "%s: 2nd usb_bulk_msg() " \ - "failed=%d\n", KBUILD_MODNAME, ret); - - dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, - actual_length, rbuf); - } - - mutex_unlock(&d->usb_mutex); - return ret; -} -EXPORT_SYMBOL(dvb_usbv2_generic_rw); - -int dvb_usbv2_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) -{ - return dvb_usbv2_generic_rw(d, buf, len, NULL, 0); -} -EXPORT_SYMBOL(dvb_usbv2_generic_write); diff --git a/drivers/media/dvb/dvb-usb-v2/ec168.c b/drivers/media/dvb/dvb-usb-v2/ec168.c deleted file mode 100644 index ab77622c383d..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/ec168.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * E3C EC168 DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include "ec168.h" -#include "ec100.h" -#include "mxl5005s.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req) -{ - int ret; - unsigned int pipe; - u8 request, requesttype; - u8 *buf; - - switch (req->cmd) { - case DOWNLOAD_FIRMWARE: - case GPIO: - case WRITE_I2C: - case STREAMING_CTRL: - requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); - request = req->cmd; - break; - case READ_I2C: - requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); - request = req->cmd; - break; - case GET_CONFIG: - requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); - request = CONFIG; - break; - case SET_CONFIG: - requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); - request = CONFIG; - break; - case WRITE_DEMOD: - requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); - request = DEMOD_RW; - break; - case READ_DEMOD: - requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); - request = DEMOD_RW; - break; - default: - pr_err("%s: unknown command=%02x\n", KBUILD_MODNAME, req->cmd); - ret = -EINVAL; - goto error; - } - - buf = kmalloc(req->size, GFP_KERNEL); - if (!buf) { - ret = -ENOMEM; - goto error; - } - - if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { - /* write */ - memcpy(buf, req->data, req->size); - pipe = usb_sndctrlpipe(d->udev, 0); - } else { - /* read */ - pipe = usb_rcvctrlpipe(d->udev, 0); - } - - msleep(1); /* avoid I2C errors */ - - ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value, - req->index, buf, req->size, EC168_USB_TIMEOUT); - - ec168_debug_dump(request, requesttype, req->value, req->index, buf, - req->size); - - if (ret < 0) - goto err_dealloc; - else - ret = 0; - - /* read request, copy returned data to return buf */ - if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) - memcpy(req->data, buf, req->size); - - kfree(buf); - return ret; - -err_dealloc: - kfree(buf); -error: - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -/* I2C */ -static struct ec100_config ec168_ec100_config; - -static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct ec168_req req; - int i = 0; - int ret; - - if (num > 2) - return -EINVAL; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - while (i < num) { - if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { - if (msg[i].addr == ec168_ec100_config.demod_address) { - req.cmd = READ_DEMOD; - req.value = 0; - req.index = 0xff00 + msg[i].buf[0]; /* reg */ - req.size = msg[i+1].len; /* bytes to read */ - req.data = &msg[i+1].buf[0]; - ret = ec168_ctrl_msg(d, &req); - i += 2; - } else { - pr_err("%s: I2C read not implemented\n", - KBUILD_MODNAME); - ret = -EOPNOTSUPP; - i += 2; - } - } else { - if (msg[i].addr == ec168_ec100_config.demod_address) { - req.cmd = WRITE_DEMOD; - req.value = msg[i].buf[1]; /* val */ - req.index = 0xff00 + msg[i].buf[0]; /* reg */ - req.size = 0; - req.data = NULL; - ret = ec168_ctrl_msg(d, &req); - i += 1; - } else { - req.cmd = WRITE_I2C; - req.value = msg[i].buf[0]; /* val */ - req.index = 0x0100 + msg[i].addr; /* I2C addr */ - req.size = msg[i].len-1; - req.data = &msg[i].buf[1]; - ret = ec168_ctrl_msg(d, &req); - i += 1; - } - } - if (ret) - goto error; - - } - ret = i; - -error: - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 ec168_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm ec168_i2c_algo = { - .master_xfer = ec168_i2c_xfer, - .functionality = ec168_i2c_func, -}; - -/* Callbacks for DVB USB */ -static int ec168_identify_state(struct dvb_usb_device *d, const char **name) -{ - int ret; - u8 reply; - struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply}; - pr_debug("%s:\n", __func__); - - ret = ec168_ctrl_msg(d, &req); - if (ret) - goto error; - - pr_debug("%s: reply=%02x\n", __func__, reply); - - if (reply == 0x01) - ret = WARM; - else - ret = COLD; - - return ret; -error: - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -static int ec168_download_firmware(struct dvb_usb_device *d, - const struct firmware *fw) -{ - int ret, len, remaining; - struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL}; - pr_debug("%s:\n", __func__); - - #define LEN_MAX 2048 /* max packet size */ - for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { - len = remaining; - if (len > LEN_MAX) - len = LEN_MAX; - - req.size = len; - req.data = (u8 *) &fw->data[fw->size - remaining]; - req.index = fw->size - remaining; - - ret = ec168_ctrl_msg(d, &req); - if (ret) { - pr_err("%s: firmware download failed=%d\n", - KBUILD_MODNAME, ret); - goto error; - } - } - - req.size = 0; - - /* set "warm"? */ - req.cmd = SET_CONFIG; - req.value = 0; - req.index = 0x0001; - ret = ec168_ctrl_msg(d, &req); - if (ret) - goto error; - - /* really needed - no idea what does */ - req.cmd = GPIO; - req.value = 0; - req.index = 0x0206; - ret = ec168_ctrl_msg(d, &req); - if (ret) - goto error; - - /* activate tuner I2C? */ - req.cmd = WRITE_I2C; - req.value = 0; - req.index = 0x00c6; - ret = ec168_ctrl_msg(d, &req); - if (ret) - goto error; - - return ret; -error: - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -static struct ec100_config ec168_ec100_config = { - .demod_address = 0xff, /* not real address, demod is integrated */ -}; - -static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap) -{ - pr_debug("%s:\n", __func__); - adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config, - &adap_to_d(adap)->i2c_adap); - if (adap->fe[0] == NULL) - return -ENODEV; - - return 0; -} - -static struct mxl5005s_config ec168_mxl5003s_config = { - .i2c_address = 0xc6, - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_OFF, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) -{ - pr_debug("%s:\n", __func__); - return dvb_attach(mxl5005s_attach, adap->fe[0], - &adap_to_d(adap)->i2c_adap, - &ec168_mxl5003s_config) == NULL ? -ENODEV : 0; -} - -static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL}; - pr_debug("%s: onoff=%d\n", __func__, onoff); - if (onoff) - req.index = 0x0102; - return ec168_ctrl_msg(fe_to_d(fe), &req); -} - -/* DVB USB Driver stuff */ -/* bInterfaceNumber 0 is HID - * bInterfaceNumber 1 is DVB-T */ -static struct dvb_usb_device_properties ec168_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .bInterfaceNumber = 1, - - .identify_state = ec168_identify_state, - .firmware = "dvb-usb-ec168.fw", - .download_firmware = ec168_download_firmware, - - .i2c_algo = &ec168_i2c_algo, - .frontend_attach = ec168_ec100_frontend_attach, - .tuner_attach = ec168_mxl5003s_tuner_attach, - .streaming_ctrl = ec168_streaming_ctrl, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512), - } - }, -}; - -static const struct dvb_usb_driver_info ec168_driver_info = { - .name = "E3C EC168 reference design", - .props = &ec168_props, -}; - -static const struct usb_device_id ec168_id[] = { - { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168), - .driver_info = (kernel_ulong_t) &ec168_driver_info }, - { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2), - .driver_info = (kernel_ulong_t) &ec168_driver_info }, - { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3), - .driver_info = (kernel_ulong_t) &ec168_driver_info }, - { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4), - .driver_info = (kernel_ulong_t) &ec168_driver_info }, - { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5), - .driver_info = (kernel_ulong_t) &ec168_driver_info }, - {} -}; -MODULE_DEVICE_TABLE(usb, ec168_id); - -static struct usb_driver ec168_driver = { - .name = KBUILD_MODNAME, - .id_table = ec168_id, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(ec168_driver); - -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("E3C EC168 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/ec168.h b/drivers/media/dvb/dvb-usb-v2/ec168.h deleted file mode 100644 index 9181236f6ebc..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/ec168.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * E3C EC168 DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef EC168_H -#define EC168_H - -#include "dvb_usb.h" - -#define ec168_debug_dump(r, t, v, i, b, l) { \ - char *direction; \ - if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ - direction = ">>>"; \ - else \ - direction = "<<<"; \ - pr_debug("%s: %02x %02x %02x %02x %02x %02x %02x %02x %s\n", \ - __func__, t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, \ - l & 0xff, l >> 8, direction); \ -} - -#define EC168_USB_TIMEOUT 1000 - -struct ec168_req { - u8 cmd; /* [1] */ - u16 value; /* [2|3] */ - u16 index; /* [4|5] */ - u16 size; /* [6|7] */ - u8 *data; -}; - -enum ec168_cmd { - DOWNLOAD_FIRMWARE = 0x00, - CONFIG = 0x01, - DEMOD_RW = 0x03, - GPIO = 0x04, - STREAMING_CTRL = 0x10, - READ_I2C = 0x20, - WRITE_I2C = 0x21, - HID_DOWNLOAD = 0x30, - GET_CONFIG, - SET_CONFIG, - READ_DEMOD, - WRITE_DEMOD, -}; - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/gl861.c b/drivers/media/dvb/dvb-usb-v2/gl861.c deleted file mode 100644 index cf29f43e3598..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/gl861.c +++ /dev/null @@ -1,175 +0,0 @@ -/* DVB USB compliant linux driver for GL861 USB2.0 devices. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "gl861.h" - -#include "zl10353.h" -#include "qt1010.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u16 index; - u16 value = addr << (8 + 1); - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 req, type; - - if (wo) { - req = GL861_REQ_I2C_WRITE; - type = GL861_WRITE; - } else { /* rw */ - req = GL861_REQ_I2C_READ; - type = GL861_READ; - } - - switch (wlen) { - case 1: - index = wbuf[0]; - break; - case 2: - index = wbuf[0]; - value = value + wbuf[1]; - break; - default: - pr_err("%s: wlen=%d, aborting\n", KBUILD_MODNAME, wlen); - return -EINVAL; - } - - msleep(1); /* avoid I2C errors */ - - return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type, - value, index, rbuf, rlen, 2000); -} - -/* I2C */ -static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - if (num > 2) - return -EINVAL; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, msg[i+1].buf, msg[i+1].len) < 0) - break; - i++; - } else - if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, NULL, 0) < 0) - break; - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 gl861_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm gl861_i2c_algo = { - .master_xfer = gl861_i2c_xfer, - .functionality = gl861_i2c_func, -}; - -/* Callbacks for DVB USB */ -static struct zl10353_config gl861_zl10353_config = { - .demod_address = 0x0f, - .no_tuner = 1, - .parallel_ts = 1, -}; - -static int gl861_frontend_attach(struct dvb_usb_adapter *adap) -{ - - adap->fe[0] = dvb_attach(zl10353_attach, &gl861_zl10353_config, - &adap_to_d(adap)->i2c_adap); - if (adap->fe[0] == NULL) - return -EIO; - - return 0; -} - -static struct qt1010_config gl861_qt1010_config = { - .i2c_address = 0x62 -}; - -static int gl861_tuner_attach(struct dvb_usb_adapter *adap) -{ - return dvb_attach(qt1010_attach, - adap->fe[0], &adap_to_d(adap)->i2c_adap, - &gl861_qt1010_config) == NULL ? -ENODEV : 0; -} - -static int gl861_init(struct dvb_usb_device *d) -{ - /* - * There is 2 interfaces. Interface 0 is for TV and interface 1 is - * for HID remote controller. Interface 0 has 2 alternate settings. - * For some reason we need to set interface explicitly, defaulted - * as alternate setting 1? - */ - return usb_set_interface(d->udev, 0, 0); -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties gl861_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - - .i2c_algo = &gl861_i2c_algo, - .frontend_attach = gl861_frontend_attach, - .tuner_attach = gl861_tuner_attach, - .init = gl861_init, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x81, 7, 512), - } - } -}; - -static const struct usb_device_id gl861_id_table[] = { - { DVB_USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580_55801, - &gl861_props, "MSI Mega Sky 55801 DVB-T USB2.0", NULL) }, - { DVB_USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU, - &gl861_props, "A-LINK DTU DVB-T USB2.0", NULL) }, - { } -}; -MODULE_DEVICE_TABLE(usb, gl861_id_table); - -static struct usb_driver gl861_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = gl861_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(gl861_usb_driver); - -MODULE_AUTHOR("Carl Lundqvist <comabug@gmail.com>"); -MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/gl861.h b/drivers/media/dvb/dvb-usb-v2/gl861.h deleted file mode 100644 index b0b80d87bb7e..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/gl861.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _DVB_USB_GL861_H_ -#define _DVB_USB_GL861_H_ - -#include "dvb_usb.h" - -#define GL861_WRITE 0x40 -#define GL861_READ 0xc0 - -#define GL861_REQ_I2C_WRITE 0x01 -#define GL861_REQ_I2C_READ 0x02 - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/it913x.c b/drivers/media/dvb/dvb-usb-v2/it913x.c deleted file mode 100644 index 695f9106bc54..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/it913x.c +++ /dev/null @@ -1,799 +0,0 @@ -/* - * DVB USB compliant linux driver for ITE IT9135 and IT9137 - * - * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com) - * IT9135 (C) ITE Tech Inc. - * IT9137 (C) ITE Tech Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License Version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * see Documentation/dvb/README.dvb-usb for more information - * see Documentation/dvb/it9137.txt for firmware information - * - */ -#define DVB_USB_LOG_PREFIX "it913x" - -#include <linux/usb.h> -#include <linux/usb/input.h> -#include <media/rc-core.h> - -#include "dvb_usb.h" -#include "it913x-fe.h" - -/* debug */ -static int dvb_usb_it913x_debug; -#define it_debug(var, level, args...) \ - do { if ((var & level)) pr_debug(DVB_USB_LOG_PREFIX": " args); \ -} while (0) -#define deb_info(level, args...) it_debug(dvb_usb_it913x_debug, level, args) -#define info(args...) pr_info(DVB_USB_LOG_PREFIX": " args) - -module_param_named(debug, dvb_usb_it913x_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); - -static int dvb_usb_it913x_firmware; -module_param_named(firmware, dvb_usb_it913x_firmware, int, 0644); -MODULE_PARM_DESC(firmware, "set firmware 0=auto"\ - "1=IT9137 2=IT9135 V1 3=IT9135 V2"); -#define FW_IT9137 "dvb-usb-it9137-01.fw" -#define FW_IT9135_V1 "dvb-usb-it9135-01.fw" -#define FW_IT9135_V2 "dvb-usb-it9135-02.fw" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct it913x_state { - struct ite_config it913x_config; - u8 pid_filter_onoff; - bool proprietary_ir; - int cmd_counter; -}; - -static u16 check_sum(u8 *p, u8 len) -{ - u16 sum = 0; - u8 i = 1; - while (i < len) - sum += (i++ & 1) ? (*p++) << 8 : *p++; - return ~sum; -} - -static int it913x_io(struct dvb_usb_device *d, u8 mode, u8 pro, - u8 cmd, u32 reg, u8 addr, u8 *data, u8 len) -{ - struct it913x_state *st = d->priv; - int ret = 0, i, buf_size = 1; - u8 *buff; - u8 rlen; - u16 chk_sum; - - buff = kzalloc(256, GFP_KERNEL); - if (!buff) { - info("USB Buffer Failed"); - return -ENOMEM; - } - - buff[buf_size++] = pro; - buff[buf_size++] = cmd; - buff[buf_size++] = st->cmd_counter; - - switch (mode) { - case READ_LONG: - case WRITE_LONG: - buff[buf_size++] = len; - buff[buf_size++] = 2; - buff[buf_size++] = (reg >> 24); - buff[buf_size++] = (reg >> 16) & 0xff; - buff[buf_size++] = (reg >> 8) & 0xff; - buff[buf_size++] = reg & 0xff; - break; - case READ_SHORT: - buff[buf_size++] = addr; - break; - case WRITE_SHORT: - buff[buf_size++] = len; - buff[buf_size++] = addr; - buff[buf_size++] = (reg >> 8) & 0xff; - buff[buf_size++] = reg & 0xff; - break; - case READ_DATA: - case WRITE_DATA: - break; - case WRITE_CMD: - mode = 7; - break; - default: - kfree(buff); - return -EINVAL; - } - - if (mode & 1) { - for (i = 0; i < len ; i++) - buff[buf_size++] = data[i]; - } - chk_sum = check_sum(&buff[1], buf_size); - - buff[buf_size++] = chk_sum >> 8; - buff[0] = buf_size; - buff[buf_size++] = (chk_sum & 0xff); - - ret = dvb_usbv2_generic_rw(d, buff, buf_size, buff, (mode & 1) ? - 5 : len + 5); - if (ret < 0) - goto error; - - rlen = (mode & 0x1) ? 0x1 : len; - - if (mode & 1) - ret = buff[2]; - else - memcpy(data, &buff[3], rlen); - - st->cmd_counter++; - -error: kfree(buff); - - return ret; -} - -static int it913x_wr_reg(struct dvb_usb_device *d, u8 pro, u32 reg , u8 data) -{ - int ret; - u8 b[1]; - b[0] = data; - ret = it913x_io(d, WRITE_LONG, pro, - CMD_DEMOD_WRITE, reg, 0, b, sizeof(b)); - - return ret; -} - -static int it913x_read_reg(struct dvb_usb_device *d, u32 reg) -{ - int ret; - u8 data[1]; - - ret = it913x_io(d, READ_LONG, DEV_0, - CMD_DEMOD_READ, reg, 0, &data[0], sizeof(data)); - - return (ret < 0) ? ret : data[0]; -} - -static int it913x_query(struct dvb_usb_device *d, u8 pro) -{ - struct it913x_state *st = d->priv; - int ret, i; - u8 data[4]; - u8 ver; - - for (i = 0; i < 5; i++) { - ret = it913x_io(d, READ_LONG, pro, CMD_DEMOD_READ, - 0x1222, 0, &data[0], 3); - ver = data[0]; - if (ver > 0 && ver < 3) - break; - msleep(100); - } - - if (ver < 1 || ver > 2) { - info("Failed to identify chip version applying 1"); - st->it913x_config.chip_ver = 0x1; - st->it913x_config.chip_type = 0x9135; - return 0; - } - - st->it913x_config.chip_ver = ver; - st->it913x_config.chip_type = (u16)(data[2] << 8) + data[1]; - - info("Chip Version=%02x Chip Type=%04x", st->it913x_config.chip_ver, - st->it913x_config.chip_type); - - ret = it913x_io(d, READ_SHORT, pro, - CMD_QUERYINFO, 0, 0x1, &data[0], 4); - - st->it913x_config.firmware = (data[0] << 24) | (data[1] << 16) | - (data[2] << 8) | data[3]; - - return ret; -} - -static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct it913x_state *st = adap_to_priv(adap); - int ret; - u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - - mutex_lock(&d->i2c_mutex); - - deb_info(1, "PID_C (%02x)", onoff); - - ret = it913x_wr_reg(d, pro, PID_EN, st->pid_filter_onoff); - - mutex_unlock(&d->i2c_mutex); - return ret; -} - -static int it913x_pid_filter(struct dvb_usb_adapter *adap, - int index, u16 pid, int onoff) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct it913x_state *st = adap_to_priv(adap); - int ret; - u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - - mutex_lock(&d->i2c_mutex); - - deb_info(1, "PID_F (%02x)", onoff); - - ret = it913x_wr_reg(d, pro, PID_LSB, (u8)(pid & 0xff)); - - ret |= it913x_wr_reg(d, pro, PID_MSB, (u8)(pid >> 8)); - - ret |= it913x_wr_reg(d, pro, PID_INX_EN, (u8)onoff); - - ret |= it913x_wr_reg(d, pro, PID_INX, (u8)(index & 0x1f)); - - if (d->udev->speed == USB_SPEED_HIGH && pid == 0x2000) { - ret |= it913x_wr_reg(d , pro, PID_EN, !onoff); - st->pid_filter_onoff = !onoff; - } else - st->pid_filter_onoff = - adap->pid_filtering; - - mutex_unlock(&d->i2c_mutex); - return 0; -} - - -static int it913x_return_status(struct dvb_usb_device *d) -{ - struct it913x_state *st = d->priv; - int ret = it913x_query(d, DEV_0); - if (st->it913x_config.firmware > 0) - info("Firmware Version %d", st->it913x_config.firmware); - - return ret; -} - -static int it913x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - static u8 data[256]; - int ret; - u32 reg; - u8 pro; - - mutex_lock(&d->i2c_mutex); - - deb_info(2, "num of messages %d address %02x", num, msg[0].addr); - - pro = (msg[0].addr & 0x2) ? DEV_0_DMOD : 0x0; - pro |= (msg[0].addr & 0x20) ? DEV_1 : DEV_0; - memcpy(data, msg[0].buf, msg[0].len); - reg = (data[0] << 24) + (data[1] << 16) + - (data[2] << 8) + data[3]; - if (num == 2) { - ret = it913x_io(d, READ_LONG, pro, - CMD_DEMOD_READ, reg, 0, data, msg[1].len); - memcpy(msg[1].buf, data, msg[1].len); - } else - ret = it913x_io(d, WRITE_LONG, pro, CMD_DEMOD_WRITE, - reg, 0, &data[4], msg[0].len - 4); - - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static u32 it913x_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm it913x_i2c_algo = { - .master_xfer = it913x_i2c_xfer, - .functionality = it913x_i2c_func, -}; - -/* Callbacks for DVB USB */ -#define IT913X_POLL 250 -static int it913x_rc_query(struct dvb_usb_device *d) -{ - u8 ibuf[4]; - int ret; - u32 key; - /* Avoid conflict with frontends*/ - mutex_lock(&d->i2c_mutex); - - ret = it913x_io(d, READ_LONG, PRO_LINK, CMD_IR_GET, - 0, 0, &ibuf[0], sizeof(ibuf)); - - if ((ibuf[2] + ibuf[3]) == 0xff) { - key = ibuf[2]; - key += ibuf[0] << 16; - key += ibuf[1] << 8; - deb_info(1, "NEC Extended Key =%08x", key); - if (d->rc_dev != NULL) - rc_keydown(d->rc_dev, key, 0); - } - - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -/* Firmware sets raw */ -static const char fw_it9135_v1[] = FW_IT9135_V1; -static const char fw_it9135_v2[] = FW_IT9135_V2; -static const char fw_it9137[] = FW_IT9137; - -static void ite_get_firmware_name(struct dvb_usb_device *d, - const char **name) -{ - struct it913x_state *st = d->priv; - int sw; - /* auto switch */ - if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_KWORLD_2) - sw = IT9137_FW; - else if (st->it913x_config.chip_ver == 1) - sw = IT9135_V1_FW; - else - sw = IT9135_V2_FW; - - /* force switch */ - if (dvb_usb_it913x_firmware != IT9135_AUTO) - sw = dvb_usb_it913x_firmware; - - switch (sw) { - case IT9135_V1_FW: - st->it913x_config.firmware_ver = 1; - st->it913x_config.adc_x2 = 1; - st->it913x_config.read_slevel = false; - *name = fw_it9135_v1; - break; - case IT9135_V2_FW: - st->it913x_config.firmware_ver = 1; - st->it913x_config.adc_x2 = 1; - st->it913x_config.read_slevel = false; - *name = fw_it9135_v2; - switch (st->it913x_config.tuner_id_0) { - case IT9135_61: - case IT9135_62: - break; - default: - info("Unknown tuner ID applying default 0x60"); - case IT9135_60: - st->it913x_config.tuner_id_0 = IT9135_60; - } - break; - case IT9137_FW: - default: - st->it913x_config.firmware_ver = 0; - st->it913x_config.adc_x2 = 0; - st->it913x_config.read_slevel = true; - *name = fw_it9137; - } - - return; -} - -#define TS_MPEG_PKT_SIZE 188 -#define EP_LOW 21 -#define TS_BUFFER_SIZE_PID (EP_LOW*TS_MPEG_PKT_SIZE) -#define EP_HIGH 348 -#define TS_BUFFER_SIZE_MAX (EP_HIGH*TS_MPEG_PKT_SIZE) - -static int it913x_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, - struct usb_data_stream_properties *stream) -{ - struct dvb_usb_adapter *adap = fe_to_adap(fe); - if (adap->pid_filtering) - stream->u.bulk.buffersize = TS_BUFFER_SIZE_PID; - else - stream->u.bulk.buffersize = TS_BUFFER_SIZE_MAX; - - return 0; -} - -static int it913x_select_config(struct dvb_usb_device *d) -{ - struct it913x_state *st = d->priv; - int ret, reg; - - ret = it913x_return_status(d); - if (ret < 0) - return ret; - - if (st->it913x_config.chip_ver == 0x02 - && st->it913x_config.chip_type == 0x9135) - reg = it913x_read_reg(d, 0x461d); - else - reg = it913x_read_reg(d, 0x461b); - - if (reg < 0) - return reg; - - if (reg == 0) { - st->it913x_config.dual_mode = 0; - st->it913x_config.tuner_id_0 = IT9135_38; - st->proprietary_ir = true; - } else { - /* TS mode */ - reg = it913x_read_reg(d, 0x49c5); - if (reg < 0) - return reg; - st->it913x_config.dual_mode = reg; - - /* IR mode type */ - reg = it913x_read_reg(d, 0x49ac); - if (reg < 0) - return reg; - if (reg == 5) { - info("Remote propriety (raw) mode"); - st->proprietary_ir = true; - } else if (reg == 1) { - info("Remote HID mode NOT SUPPORTED"); - st->proprietary_ir = false; - } - - /* Tuner_id */ - reg = it913x_read_reg(d, 0x49d0); - if (reg < 0) - return reg; - st->it913x_config.tuner_id_0 = reg; - } - - info("Dual mode=%x Tuner Type=%x", st->it913x_config.dual_mode, - st->it913x_config.tuner_id_0); - - return ret; -} - -static int it913x_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct dvb_usb_adapter *adap = fe_to_adap(fe); - struct dvb_usb_device *d = adap_to_d(adap); - struct it913x_state *st = fe_to_priv(fe); - int ret = 0; - u8 pro = (adap->id == 0) ? DEV_0_DMOD : DEV_1_DMOD; - - deb_info(1, "STM (%02x)", onoff); - - if (!onoff) { - mutex_lock(&d->i2c_mutex); - - ret = it913x_wr_reg(d, pro, PID_RST, 0x1); - - mutex_unlock(&d->i2c_mutex); - st->pid_filter_onoff = - adap->pid_filtering; - - } - - return ret; -} - -static int it913x_identify_state(struct dvb_usb_device *d, const char **name) -{ - struct it913x_state *st = d->priv; - int ret; - u8 reg; - - /* Read and select config */ - ret = it913x_select_config(d); - if (ret < 0) - return ret; - - ite_get_firmware_name(d, name); - - if (st->it913x_config.firmware > 0) - return WARM; - - if (st->it913x_config.dual_mode) { - st->it913x_config.tuner_id_1 = it913x_read_reg(d, 0x49e0); - ret = it913x_wr_reg(d, DEV_0, GPIOH1_EN, 0x1); - ret |= it913x_wr_reg(d, DEV_0, GPIOH1_ON, 0x1); - ret |= it913x_wr_reg(d, DEV_0, GPIOH1_O, 0x1); - msleep(50); - ret |= it913x_wr_reg(d, DEV_0, GPIOH1_O, 0x0); - msleep(50); - reg = it913x_read_reg(d, GPIOH1_O); - if (reg == 0) { - ret |= it913x_wr_reg(d, DEV_0, GPIOH1_O, 0x1); - ret |= it913x_return_status(d); - if (ret != 0) - ret = it913x_wr_reg(d, DEV_0, - GPIOH1_O, 0x0); - } - } - - reg = it913x_read_reg(d, IO_MUX_POWER_CLK); - - if (st->it913x_config.dual_mode) { - ret |= it913x_wr_reg(d, DEV_0, 0x4bfb, CHIP2_I2C_ADDR); - if (st->it913x_config.firmware_ver == 1) - ret |= it913x_wr_reg(d, DEV_0, 0xcfff, 0x1); - else - ret |= it913x_wr_reg(d, DEV_0, CLK_O_EN, 0x1); - } else { - ret |= it913x_wr_reg(d, DEV_0, 0x4bfb, 0x0); - if (st->it913x_config.firmware_ver == 1) - ret |= it913x_wr_reg(d, DEV_0, 0xcfff, 0x0); - else - ret |= it913x_wr_reg(d, DEV_0, CLK_O_EN, 0x0); - } - - ret |= it913x_wr_reg(d, DEV_0, I2C_CLK, I2C_CLK_100); - - return (ret < 0) ? ret : COLD; -} - -static int it913x_download_firmware(struct dvb_usb_device *d, - const struct firmware *fw) -{ - struct it913x_state *st = d->priv; - int ret = 0, i = 0, pos = 0; - u8 packet_size, min_pkt; - u8 *fw_data; - - ret = it913x_wr_reg(d, DEV_0, I2C_CLK, I2C_CLK_100); - - info("FRM Starting Firmware Download"); - - /* Multi firmware loader */ - /* This uses scatter write firmware headers */ - /* The firmware must start with 03 XX 00 */ - /* and be the extact firmware length */ - - if (st->it913x_config.chip_ver == 2) - min_pkt = 0x11; - else - min_pkt = 0x19; - - while (i <= fw->size) { - if (((fw->data[i] == 0x3) && (fw->data[i + 2] == 0x0)) - || (i == fw->size)) { - packet_size = i - pos; - if ((packet_size > min_pkt) || (i == fw->size)) { - fw_data = (u8 *)(fw->data + pos); - pos += packet_size; - if (packet_size > 0) { - ret = it913x_io(d, WRITE_DATA, - DEV_0, CMD_SCATTER_WRITE, 0, - 0, fw_data, packet_size); - if (ret < 0) - break; - } - udelay(1000); - } - } - i++; - } - - if (ret < 0) - info("FRM Firmware Download Failed (%d)" , ret); - else - info("FRM Firmware Download Completed - Resetting Device"); - - msleep(30); - - ret = it913x_io(d, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0); - if (ret < 0) - info("FRM Device not responding to reboot"); - - ret = it913x_return_status(d); - if (st->it913x_config.firmware == 0) { - info("FRM Failed to reboot device"); - return -ENODEV; - } - - msleep(30); - - ret = it913x_wr_reg(d, DEV_0, I2C_CLK, I2C_CLK_400); - - msleep(30); - - /* Tuner function */ - if (st->it913x_config.dual_mode) - ret |= it913x_wr_reg(d, DEV_0_DMOD , 0xec4c, 0xa0); - else - ret |= it913x_wr_reg(d, DEV_0_DMOD , 0xec4c, 0x68); - - if ((st->it913x_config.chip_ver == 1) && - (st->it913x_config.chip_type == 0x9135)) { - ret |= it913x_wr_reg(d, DEV_0, PADODPU, 0x0); - ret |= it913x_wr_reg(d, DEV_0, AGC_O_D, 0x0); - if (st->it913x_config.dual_mode) { - ret |= it913x_wr_reg(d, DEV_1, PADODPU, 0x0); - ret |= it913x_wr_reg(d, DEV_1, AGC_O_D, 0x0); - } - } - - return (ret < 0) ? -ENODEV : 0; -} - -static int it913x_name(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - const char *desc = d->name; - char *fe_name[] = {"_1", "_2", "_3", "_4"}; - char *name = adap->fe[0]->ops.info.name; - - strlcpy(name, desc, 128); - strlcat(name, fe_name[adap->id], 128); - - return 0; -} - -static int it913x_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct it913x_state *st = d->priv; - int ret = 0; - u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5); - u16 ep_size = adap->stream.buf_size / 4; - u8 pkt_size = 0x80; - - if (d->udev->speed != USB_SPEED_HIGH) - pkt_size = 0x10; - - st->it913x_config.adf = it913x_read_reg(d, IO_MUX_POWER_CLK); - - adap->fe[0] = dvb_attach(it913x_fe_attach, - &d->i2c_adap, adap_addr, &st->it913x_config); - - if (adap->id == 0 && adap->fe[0]) { - it913x_wr_reg(d, DEV_0_DMOD, MP2_SW_RST, 0x1); - it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_SW_RST, 0x1); - it913x_wr_reg(d, DEV_0, EP0_TX_EN, 0x0f); - it913x_wr_reg(d, DEV_0, EP0_TX_NAK, 0x1b); - it913x_wr_reg(d, DEV_0, EP0_TX_EN, 0x2f); - it913x_wr_reg(d, DEV_0, EP4_TX_LEN_LSB, - ep_size & 0xff); - it913x_wr_reg(d, DEV_0, EP4_TX_LEN_MSB, ep_size >> 8); - ret = it913x_wr_reg(d, DEV_0, EP4_MAX_PKT, pkt_size); - } else if (adap->id == 1 && adap->fe[0]) { - it913x_wr_reg(d, DEV_0, EP0_TX_EN, 0x6f); - it913x_wr_reg(d, DEV_0, EP5_TX_LEN_LSB, - ep_size & 0xff); - it913x_wr_reg(d, DEV_0, EP5_TX_LEN_MSB, ep_size >> 8); - it913x_wr_reg(d, DEV_0, EP5_MAX_PKT, pkt_size); - it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_EN, 0x1); - it913x_wr_reg(d, DEV_1_DMOD, MP2IF_SERIAL, 0x1); - it913x_wr_reg(d, DEV_1, TOP_HOSTB_SER_MODE, 0x1); - it913x_wr_reg(d, DEV_0_DMOD, TSIS_ENABLE, 0x1); - it913x_wr_reg(d, DEV_0_DMOD, MP2_SW_RST, 0x0); - it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_SW_RST, 0x0); - it913x_wr_reg(d, DEV_0_DMOD, MP2IF2_HALF_PSB, 0x0); - it913x_wr_reg(d, DEV_0_DMOD, MP2IF_STOP_EN, 0x1); - it913x_wr_reg(d, DEV_1_DMOD, MPEG_FULL_SPEED, 0x0); - ret = it913x_wr_reg(d, DEV_1_DMOD, MP2IF_STOP_EN, 0x0); - } else - return -ENODEV; - - ret |= it913x_name(adap); - - return ret; -} - -/* DVB USB Driver */ -static int it913x_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) -{ - struct it913x_state *st = d->priv; - - if (st->proprietary_ir == false) { - rc->map_name = NULL; - return 0; - } - - rc->allowed_protos = RC_TYPE_NEC; - rc->query = it913x_rc_query; - rc->interval = 250; - - return 0; -} - -static int it913x_get_adapter_count(struct dvb_usb_device *d) -{ - struct it913x_state *st = d->priv; - if (st->it913x_config.dual_mode) - return 2; - return 1; -} - -static struct dvb_usb_device_properties it913x_properties = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .bInterfaceNumber = 0, - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct it913x_state), - - .identify_state = it913x_identify_state, - .i2c_algo = &it913x_i2c_algo, - - .download_firmware = it913x_download_firmware, - - .frontend_attach = it913x_frontend_attach, - .get_rc_config = it913x_get_rc_config, - .get_stream_config = it913x_get_stream_config, - .get_adapter_count = it913x_get_adapter_count, - .streaming_ctrl = it913x_streaming_ctrl, - - - .adapter = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER| - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = it913x_pid_filter, - .pid_filter_ctrl = it913x_pid_filter_ctrl, - .stream = - DVB_USB_STREAM_BULK(0x84, 10, TS_BUFFER_SIZE_MAX), - }, - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER| - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = it913x_pid_filter, - .pid_filter_ctrl = it913x_pid_filter_ctrl, - .stream = - DVB_USB_STREAM_BULK(0x85, 10, TS_BUFFER_SIZE_MAX), - } - } -}; - -static const struct usb_device_id it913x_id_table[] = { - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09, - &it913x_properties, "Kworld UB499-2T T09(IT9137)", - RC_MAP_IT913X_V1) }, - { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135, - &it913x_properties, "ITE 9135 Generic", - RC_MAP_IT913X_V1) }, - { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137, - &it913x_properties, "Sveon STV22 Dual DVB-T HDTV(IT9137)", - RC_MAP_IT913X_V1) }, - { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005, - &it913x_properties, "ITE 9135(9005) Generic", - RC_MAP_IT913X_V2) }, - { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006, - &it913x_properties, "ITE 9135(9006) Generic", - RC_MAP_IT913X_V1) }, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, it913x_id_table); - -static struct usb_driver it913x_driver = { - .name = KBUILD_MODNAME, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .id_table = it913x_id_table, -}; - -module_usb_driver(it913x_driver); - -MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); -MODULE_DESCRIPTION("it913x USB 2 Driver"); -MODULE_VERSION("1.32"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE(FW_IT9135_V1); -MODULE_FIRMWARE(FW_IT9135_V2); -MODULE_FIRMWARE(FW_IT9137); - diff --git a/drivers/media/dvb/dvb-usb-v2/lmedm04.c b/drivers/media/dvb/dvb-usb-v2/lmedm04.c deleted file mode 100644 index c41d9d9ec7b5..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/lmedm04.c +++ /dev/null @@ -1,1369 +0,0 @@ -/* DVB USB compliant linux driver for - * - * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395 - * LME2510C + LG TDQY-P001F - * LME2510C + BS2F7HZ0194 - * LME2510 + LG TDQY-P001F - * LME2510 + BS2F7HZ0194 - * - * MVB7395 (LME2510C+SHARP:BS2F7HZ7395) - * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V) - * - * MV001F (LME2510+LGTDQY-P001F) - * LG TDQY - P001F =(TDA8263 + TDA10086H) - * - * MVB0001F (LME2510C+LGTDQT-P001F) - * - * MV0194 (LME2510+SHARP:BS2F7HZ0194) - * SHARP:BS2F7HZ0194 = (STV0299+IX2410) - * - * MVB0194 (LME2510C+SHARP0194) - * - * LME2510C + M88RS2000 - * - * For firmware see Documentation/dvb/lmedm04.txt - * - * I2C addresses: - * 0xd0 - STV0288 - Demodulator - * 0xc0 - Sharp IX2505V - Tuner - * -- - * 0x1c - TDA10086 - Demodulator - * 0xc0 - TDA8263 - Tuner - * -- - * 0xd0 - STV0299 - Demodulator - * 0xc0 - IX2410 - Tuner - * - * - * VID = 3344 PID LME2510=1122 LME2510C=1120 - * - * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com) - * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License Version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * see Documentation/dvb/README.dvb-usb for more information - * - * Known Issues : - * LME2510: Non Intel USB chipsets fail to maintain High Speed on - * Boot or Hot Plug. - * - * QQbox suffers from noise on LNB voltage. - * - * LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system - * with other tuners. After a cold reset streaming will not start. - * - * M88RS2000 suffers from loss of lock. - */ -#define DVB_USB_LOG_PREFIX "LME2510(C)" -#include <linux/usb.h> -#include <linux/usb/input.h> -#include <media/rc-core.h> - -#include "dvb_usb.h" -#include "lmedm04.h" -#include "tda826x.h" -#include "tda10086.h" -#include "stv0288.h" -#include "ix2505v.h" -#include "stv0299.h" -#include "dvb-pll.h" -#include "z0194a.h" -#include "m88rs2000.h" - - -#define LME2510_C_S7395 "dvb-usb-lme2510c-s7395.fw"; -#define LME2510_C_LG "dvb-usb-lme2510c-lg.fw"; -#define LME2510_C_S0194 "dvb-usb-lme2510c-s0194.fw"; -#define LME2510_C_RS2000 "dvb-usb-lme2510c-rs2000.fw"; -#define LME2510_LG "dvb-usb-lme2510-lg.fw"; -#define LME2510_S0194 "dvb-usb-lme2510-s0194.fw"; - -/* debug */ -static int dvb_usb_lme2510_debug; -#define lme_debug(var, level, args...) do { \ - if ((var >= level)) \ - pr_debug(DVB_USB_LOG_PREFIX": " args); \ -} while (0) -#define deb_info(level, args...) lme_debug(dvb_usb_lme2510_debug, level, args) -#define debug_data_snipet(level, name, p) \ - deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \ - *p, *(p+1), *(p+2), *(p+3), *(p+4), \ - *(p+5), *(p+6), *(p+7)); -#define info(args...) pr_info(DVB_USB_LOG_PREFIX": "args) - -module_param_named(debug, dvb_usb_lme2510_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); - -static int dvb_usb_lme2510_firmware; -module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644); -MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG"); - -static int pid_filter; -module_param_named(pid, pid_filter, int, 0644); -MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on"); - - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define TUNER_DEFAULT 0x0 -#define TUNER_LG 0x1 -#define TUNER_S7395 0x2 -#define TUNER_S0194 0x3 -#define TUNER_RS2000 0x4 - -struct lme2510_state { - u8 id; - u8 tuner_config; - u8 signal_lock; - u8 signal_level; - u8 signal_sn; - u8 time_key; - u8 last_key; - u8 key_timeout; - u8 i2c_talk_onoff; - u8 i2c_gate; - u8 i2c_tuner_gate_w; - u8 i2c_tuner_gate_r; - u8 i2c_tuner_addr; - u8 stream_on; - u8 pid_size; - u8 pid_off; - void *buffer; - struct urb *lme_urb; - void *usb_buffer; - int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t); - u8 dvb_usb_lme2510_firmware; -}; - -static int lme2510_bulk_write(struct usb_device *dev, - u8 *snd, int len, u8 pipe) -{ - int ret, actual_l; - - ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe), - snd, len , &actual_l, 100); - return ret; -} - -static int lme2510_bulk_read(struct usb_device *dev, - u8 *rev, int len, u8 pipe) -{ - int ret, actual_l; - - ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe), - rev, len , &actual_l, 200); - return ret; -} - -static int lme2510_usb_talk(struct dvb_usb_device *d, - u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - struct lme2510_state *st = d->priv; - u8 *buff; - int ret = 0; - - if (st->usb_buffer == NULL) { - st->usb_buffer = kmalloc(64, GFP_KERNEL); - if (st->usb_buffer == NULL) { - info("MEM Error no memory"); - return -ENOMEM; - } - } - buff = st->usb_buffer; - - ret = mutex_lock_interruptible(&d->usb_mutex); - - if (ret < 0) - return -EAGAIN; - - /* the read/write capped at 64 */ - memcpy(buff, wbuf, (wlen < 64) ? wlen : 64); - - ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01); - - ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ? - rlen : 64 , 0x01); - - if (rlen > 0) - memcpy(rbuf, buff, rlen); - - mutex_unlock(&d->usb_mutex); - - return (ret < 0) ? -ENODEV : 0; -} - -static int lme2510_stream_restart(struct dvb_usb_device *d) -{ - struct lme2510_state *st = d->priv; - u8 all_pids[] = LME_ALL_PIDS; - u8 stream_on[] = LME_ST_ON_W; - int ret; - u8 rbuff[1]; - if (st->pid_off) - ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids), - rbuff, sizeof(rbuff)); - /*Restart Stream Command*/ - ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on), - rbuff, sizeof(rbuff)); - return ret; -} - -static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out) -{ - struct lme2510_state *st = d->priv; - static u8 pid_buff[] = LME_ZERO_PID; - static u8 rbuf[1]; - u8 pid_no = index * 2; - u8 pid_len = pid_no + 2; - int ret = 0; - deb_info(1, "PID Setting Pid %04x", pid_out); - - if (st->pid_size == 0) - ret |= lme2510_stream_restart(d); - - pid_buff[2] = pid_no; - pid_buff[3] = (u8)pid_out & 0xff; - pid_buff[4] = pid_no + 1; - pid_buff[5] = (u8)(pid_out >> 8); - - if (pid_len > st->pid_size) - st->pid_size = pid_len; - pid_buff[7] = 0x80 + st->pid_size; - - ret |= lme2510_usb_talk(d, pid_buff , - sizeof(pid_buff) , rbuf, sizeof(rbuf)); - - if (st->stream_on) - ret |= lme2510_stream_restart(d); - - return ret; -} - -static void lme2510_int_response(struct urb *lme_urb) -{ - struct dvb_usb_adapter *adap = lme_urb->context; - struct lme2510_state *st = adap_to_priv(adap); - static u8 *ibuf, *rbuf; - int i = 0, offset; - u32 key; - - switch (lme_urb->status) { - case 0: - case -ETIMEDOUT: - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - return; - default: - info("Error %x", lme_urb->status); - break; - } - - rbuf = (u8 *) lme_urb->transfer_buffer; - - offset = ((lme_urb->actual_length/8) > 4) - ? 4 : (lme_urb->actual_length/8) ; - - for (i = 0; i < offset; ++i) { - ibuf = (u8 *)&rbuf[i*8]; - deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x", - offset, i, ibuf[0], ibuf[1]); - - switch (ibuf[0]) { - case 0xaa: - debug_data_snipet(1, "INT Remote data snipet", ibuf); - if ((ibuf[4] + ibuf[5]) == 0xff) { - key = ibuf[5]; - key += (ibuf[3] > 0) - ? (ibuf[3] ^ 0xff) << 8 : 0; - key += (ibuf[2] ^ 0xff) << 16; - deb_info(1, "INT Key =%08x", key); - if (adap_to_d(adap)->rc_dev != NULL) - rc_keydown(adap_to_d(adap)->rc_dev, - key, 0); - } - break; - case 0xbb: - switch (st->tuner_config) { - case TUNER_LG: - if (ibuf[2] > 0) - st->signal_lock = ibuf[2]; - st->signal_level = ibuf[4]; - st->signal_sn = ibuf[3]; - st->time_key = ibuf[7]; - break; - case TUNER_S7395: - case TUNER_S0194: - /* Tweak for earlier firmware*/ - if (ibuf[1] == 0x03) { - if (ibuf[2] > 1) - st->signal_lock = ibuf[2]; - st->signal_level = ibuf[3]; - st->signal_sn = ibuf[4]; - } else { - st->signal_level = ibuf[4]; - st->signal_sn = ibuf[5]; - st->signal_lock = - (st->signal_lock & 0xf7) + - ((ibuf[2] & 0x01) << 0x03); - } - break; - case TUNER_RS2000: - if (ibuf[1] == 0x3 && ibuf[6] == 0xff) - st->signal_lock = 0xff; - else - st->signal_lock = 0x00; - st->signal_level = ibuf[5]; - st->signal_sn = ibuf[4]; - st->time_key = ibuf[7]; - default: - break; - } - debug_data_snipet(5, "INT Remote data snipet in", ibuf); - break; - case 0xcc: - debug_data_snipet(1, "INT Control data snipet", ibuf); - break; - default: - debug_data_snipet(1, "INT Unknown data snipet", ibuf); - break; - } - } - usb_submit_urb(lme_urb, GFP_ATOMIC); -} - -static int lme2510_int_read(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *lme_int = adap_to_priv(adap); - - lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC); - - if (lme_int->lme_urb == NULL) - return -ENOMEM; - - lme_int->buffer = usb_alloc_coherent(d->udev, 128, GFP_ATOMIC, - &lme_int->lme_urb->transfer_dma); - - if (lme_int->buffer == NULL) - return -ENOMEM; - - usb_fill_int_urb(lme_int->lme_urb, - d->udev, - usb_rcvintpipe(d->udev, 0xa), - lme_int->buffer, - 128, - lme2510_int_response, - adap, - 8); - - lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC); - info("INT Interrupt Service Started"); - - return 0; -} - -static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *st = adap_to_priv(adap); - static u8 clear_pid_reg[] = LME_ALL_PIDS; - static u8 rbuf[1]; - int ret = 0; - - deb_info(1, "PID Clearing Filter"); - - mutex_lock(&d->i2c_mutex); - - if (!onoff) { - ret |= lme2510_usb_talk(d, clear_pid_reg, - sizeof(clear_pid_reg), rbuf, sizeof(rbuf)); - st->pid_off = true; - } else - st->pid_off = false; - - st->pid_size = 0; - - mutex_unlock(&d->i2c_mutex); - - return 0; -} - -static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, - int onoff) -{ - struct dvb_usb_device *d = adap_to_d(adap); - int ret = 0; - - deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__, - pid, index, onoff); - - if (onoff) { - mutex_lock(&d->i2c_mutex); - ret |= lme2510_enable_pid(d, index, pid); - mutex_unlock(&d->i2c_mutex); - } - - - return ret; -} - - -static int lme2510_return_status(struct dvb_usb_device *d) -{ - int ret = 0; - u8 *data; - - data = kzalloc(10, GFP_KERNEL); - if (!data) - return -ENOMEM; - - ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), - 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200); - info("Firmware Status: %x (%x)", ret , data[2]); - - ret = (ret < 0) ? -ENODEV : data[2]; - kfree(data); - return ret; -} - -static int lme2510_msg(struct dvb_usb_device *d, - u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - int ret = 0; - struct lme2510_state *st = d->priv; - - if (st->i2c_talk_onoff == 1) { - - ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - - switch (st->tuner_config) { - case TUNER_LG: - if (wbuf[2] == 0x1c) { - if (wbuf[3] == 0x0e) { - st->signal_lock = rbuf[1]; - if ((st->stream_on & 1) && - (st->signal_lock & 0x10)) { - lme2510_stream_restart(d); - st->i2c_talk_onoff = 0; - } - msleep(80); - } - } - break; - case TUNER_S7395: - if (wbuf[2] == 0xd0) { - if (wbuf[3] == 0x24) { - st->signal_lock = rbuf[1]; - if ((st->stream_on & 1) && - (st->signal_lock & 0x8)) { - lme2510_stream_restart(d); - st->i2c_talk_onoff = 0; - } - } - } - break; - case TUNER_S0194: - if (wbuf[2] == 0xd0) { - if (wbuf[3] == 0x1b) { - st->signal_lock = rbuf[1]; - if ((st->stream_on & 1) && - (st->signal_lock & 0x8)) { - lme2510_stream_restart(d); - st->i2c_talk_onoff = 0; - } - } - } - break; - case TUNER_RS2000: - default: - break; - } - } else { - /* TODO rewrite this section */ - switch (st->tuner_config) { - case TUNER_LG: - switch (wbuf[3]) { - case 0x0e: - rbuf[0] = 0x55; - rbuf[1] = st->signal_lock; - break; - case 0x43: - rbuf[0] = 0x55; - rbuf[1] = st->signal_level; - break; - case 0x1c: - rbuf[0] = 0x55; - rbuf[1] = st->signal_sn; - break; - case 0x15: - case 0x16: - case 0x17: - case 0x18: - rbuf[0] = 0x55; - rbuf[1] = 0x00; - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - break; - case TUNER_S7395: - switch (wbuf[3]) { - case 0x10: - rbuf[0] = 0x55; - rbuf[1] = (st->signal_level & 0x80) - ? 0 : (st->signal_level * 2); - break; - case 0x2d: - rbuf[0] = 0x55; - rbuf[1] = st->signal_sn; - break; - case 0x24: - rbuf[0] = 0x55; - rbuf[1] = st->signal_lock; - break; - case 0x2e: - case 0x26: - case 0x27: - rbuf[0] = 0x55; - rbuf[1] = 0x00; - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - break; - case TUNER_S0194: - switch (wbuf[3]) { - case 0x18: - rbuf[0] = 0x55; - rbuf[1] = (st->signal_level & 0x80) - ? 0 : (st->signal_level * 2); - break; - case 0x24: - rbuf[0] = 0x55; - rbuf[1] = st->signal_sn; - break; - case 0x1b: - rbuf[0] = 0x55; - rbuf[1] = st->signal_lock; - break; - case 0x19: - case 0x25: - case 0x1e: - case 0x1d: - rbuf[0] = 0x55; - rbuf[1] = 0x00; - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - break; - case TUNER_RS2000: - switch (wbuf[3]) { - case 0x8c: - rbuf[0] = 0x55; - rbuf[1] = 0xff; - if (st->last_key == st->time_key) { - st->key_timeout++; - if (st->key_timeout > 5) - rbuf[1] = 0; - } else - st->key_timeout = 0; - st->last_key = st->time_key; - break; - default: - lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - st->i2c_talk_onoff = 1; - break; - } - default: - break; - } - - deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)", - wbuf[3], rbuf[1]); - - } - - return ret; -} - - -static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct lme2510_state *st = d->priv; - static u8 obuf[64], ibuf[64]; - int i, read, read_o; - u16 len; - u8 gate = st->i2c_gate; - - mutex_lock(&d->i2c_mutex); - - if (gate == 0) - gate = 5; - - for (i = 0; i < num; i++) { - read_o = 1 & (msg[i].flags & I2C_M_RD); - read = i+1 < num && (msg[i+1].flags & I2C_M_RD); - read |= read_o; - gate = (msg[i].addr == st->i2c_tuner_addr) - ? (read) ? st->i2c_tuner_gate_r - : st->i2c_tuner_gate_w - : st->i2c_gate; - obuf[0] = gate | (read << 7); - - if (gate == 5) - obuf[1] = (read) ? 2 : msg[i].len + 1; - else - obuf[1] = msg[i].len + read + 1; - - obuf[2] = msg[i].addr; - if (read) { - if (read_o) - len = 3; - else { - memcpy(&obuf[3], msg[i].buf, msg[i].len); - obuf[msg[i].len+3] = msg[i+1].len; - len = msg[i].len+4; - } - } else { - memcpy(&obuf[3], msg[i].buf, msg[i].len); - len = msg[i].len+3; - } - - if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) { - deb_info(1, "i2c transfer failed."); - mutex_unlock(&d->i2c_mutex); - return -EAGAIN; - } - - if (read) { - if (read_o) - memcpy(msg[i].buf, &ibuf[1], msg[i].len); - else { - memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len); - i++; - } - } - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 lme2510_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm lme2510_i2c_algo = { - .master_xfer = lme2510_i2c_xfer, - .functionality = lme2510_i2c_func, -}; - -static int lme2510_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct dvb_usb_adapter *adap = fe_to_adap(fe); - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *st = adap_to_priv(adap); - static u8 clear_reg_3[] = LME_ALL_PIDS; - static u8 rbuf[1]; - int ret = 0, rlen = sizeof(rbuf); - - deb_info(1, "STM (%02x)", onoff); - - /* Streaming is started by FE_HAS_LOCK */ - if (onoff == 1) - st->stream_on = 1; - else { - deb_info(1, "STM Steam Off"); - /* mutex is here only to avoid collision with I2C */ - mutex_lock(&d->i2c_mutex); - - ret = lme2510_usb_talk(d, clear_reg_3, - sizeof(clear_reg_3), rbuf, rlen); - st->stream_on = 0; - st->i2c_talk_onoff = 1; - - mutex_unlock(&d->i2c_mutex); - } - - return (ret < 0) ? -ENODEV : 0; -} - -static u8 check_sum(u8 *p, u8 len) -{ - u8 sum = 0; - while (len--) - sum += *p++; - return sum; -} - -static int lme2510_download_firmware(struct dvb_usb_device *d, - const struct firmware *fw) -{ - int ret = 0; - u8 *data; - u16 j, wlen, len_in, start, end; - u8 packet_size, dlen, i; - u8 *fw_data; - - packet_size = 0x31; - len_in = 1; - - data = kzalloc(128, GFP_KERNEL); - if (!data) { - info("FRM Could not start Firmware Download"\ - "(Buffer allocation failed)"); - return -ENOMEM; - } - - info("FRM Starting Firmware Download"); - - for (i = 1; i < 3; i++) { - start = (i == 1) ? 0 : 512; - end = (i == 1) ? 512 : fw->size; - for (j = start; j < end; j += (packet_size+1)) { - fw_data = (u8 *)(fw->data + j); - if ((end - j) > packet_size) { - data[0] = i; - dlen = packet_size; - } else { - data[0] = i | 0x80; - dlen = (u8)(end - j)-1; - } - data[1] = dlen; - memcpy(&data[2], fw_data, dlen+1); - wlen = (u8) dlen + 4; - data[wlen-1] = check_sum(fw_data, dlen+1); - deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3], - data[dlen+2], data[dlen+3]); - lme2510_usb_talk(d, data, wlen, data, len_in); - ret |= (data[0] == 0x88) ? 0 : -1; - } - } - - data[0] = 0x8a; - len_in = 1; - msleep(2000); - lme2510_usb_talk(d, data, len_in, data, len_in); - msleep(400); - - if (ret < 0) - info("FRM Firmware Download Failed (%04x)" , ret); - else - info("FRM Firmware Download Completed - Resetting Device"); - - kfree(data); - return RECONNECTS_USB; -} - -static void lme_coldreset(struct dvb_usb_device *d) -{ - u8 data[1] = {0}; - data[0] = 0x0a; - info("FRM Firmware Cold Reset"); - - lme2510_usb_talk(d, data, sizeof(data), data, sizeof(data)); - - return; -} - -static const char fw_c_s7395[] = LME2510_C_S7395; -static const char fw_c_lg[] = LME2510_C_LG; -static const char fw_c_s0194[] = LME2510_C_S0194; -static const char fw_c_rs2000[] = LME2510_C_RS2000; -static const char fw_lg[] = LME2510_LG; -static const char fw_s0194[] = LME2510_S0194; - -const char *lme_firmware_switch(struct dvb_usb_device *d, int cold) -{ - struct lme2510_state *st = d->priv; - struct usb_device *udev = d->udev; - const struct firmware *fw = NULL; - const char *fw_lme; - int ret = 0; - - cold = (cold > 0) ? (cold & 1) : 0; - - switch (le16_to_cpu(udev->descriptor.idProduct)) { - case 0x1122: - switch (st->dvb_usb_lme2510_firmware) { - default: - st->dvb_usb_lme2510_firmware = TUNER_S0194; - case TUNER_S0194: - fw_lme = fw_s0194; - ret = request_firmware(&fw, fw_lme, &udev->dev); - if (ret == 0) { - cold = 0; - break; - } - st->dvb_usb_lme2510_firmware = TUNER_LG; - case TUNER_LG: - fw_lme = fw_lg; - ret = request_firmware(&fw, fw_lme, &udev->dev); - if (ret == 0) - break; - st->dvb_usb_lme2510_firmware = TUNER_DEFAULT; - break; - } - break; - case 0x1120: - switch (st->dvb_usb_lme2510_firmware) { - default: - st->dvb_usb_lme2510_firmware = TUNER_S7395; - case TUNER_S7395: - fw_lme = fw_c_s7395; - ret = request_firmware(&fw, fw_lme, &udev->dev); - if (ret == 0) { - cold = 0; - break; - } - st->dvb_usb_lme2510_firmware = TUNER_LG; - case TUNER_LG: - fw_lme = fw_c_lg; - ret = request_firmware(&fw, fw_lme, &udev->dev); - if (ret == 0) - break; - st->dvb_usb_lme2510_firmware = TUNER_S0194; - case TUNER_S0194: - fw_lme = fw_c_s0194; - ret = request_firmware(&fw, fw_lme, &udev->dev); - if (ret == 0) - break; - st->dvb_usb_lme2510_firmware = TUNER_DEFAULT; - cold = 0; - break; - } - break; - case 0x22f0: - fw_lme = fw_c_rs2000; - st->dvb_usb_lme2510_firmware = TUNER_RS2000; - break; - default: - fw_lme = fw_c_s7395; - } - - release_firmware(fw); - - if (cold) { - dvb_usb_lme2510_firmware = st->dvb_usb_lme2510_firmware; - info("FRM Changing to %s firmware", fw_lme); - lme_coldreset(d); - return NULL; - } - - return fw_lme; -} - -static int lme2510_kill_urb(struct usb_data_stream *stream) -{ - int i; - - for (i = 0; i < stream->urbs_submitted; i++) { - deb_info(3, "killing URB no. %d.", i); - /* stop the URB */ - usb_kill_urb(stream->urb_list[i]); - } - stream->urbs_submitted = 0; - - return 0; -} - -static struct tda10086_config tda10086_config = { - .demod_address = 0x1c, - .invert = 0, - .diseqc_tone = 1, - .xtal_freq = TDA10086_XTAL_16M, -}; - -static struct stv0288_config lme_config = { - .demod_address = 0xd0, - .min_delay_ms = 15, - .inittab = s7395_inittab, -}; - -static struct ix2505v_config lme_tuner = { - .tuner_address = 0xc0, - .min_delay_ms = 100, - .tuner_gain = 0x0, - .tuner_chargepump = 0x3, -}; - -static struct stv0299_config sharp_z0194_config = { - .demod_address = 0xd0, - .inittab = sharp_z0194a_inittab, - .mclk = 88000000UL, - .invert = 0, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = sharp_z0194a_set_symbol_rate, -}; - -static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe, - int caller) -{ - struct dvb_usb_adapter *adap = fe_to_adap(fe); - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *st = d->priv; - - mutex_lock(&d->i2c_mutex); - if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) { - st->i2c_talk_onoff = 0; - lme2510_stream_restart(d); - } - mutex_unlock(&d->i2c_mutex); - - return 0; -} - -static struct m88rs2000_config m88rs2000_config = { - .demod_addr = 0xd0, - .tuner_addr = 0xc0, - .set_ts_params = dm04_rs2000_set_ts_param, -}; - -static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, - fe_sec_voltage_t voltage) -{ - struct dvb_usb_device *d = fe_to_d(fe); - struct lme2510_state *st = fe_to_priv(fe); - static u8 voltage_low[] = LME_VOLTAGE_L; - static u8 voltage_high[] = LME_VOLTAGE_H; - static u8 rbuf[1]; - int ret = 0, len = 3, rlen = 1; - - mutex_lock(&d->i2c_mutex); - - switch (voltage) { - case SEC_VOLTAGE_18: - ret |= lme2510_usb_talk(d, - voltage_high, len, rbuf, rlen); - break; - - case SEC_VOLTAGE_OFF: - case SEC_VOLTAGE_13: - default: - ret |= lme2510_usb_talk(d, - voltage_low, len, rbuf, rlen); - break; - } - - mutex_unlock(&d->i2c_mutex); - - if (st->tuner_config == TUNER_RS2000) - if (st->fe_set_voltage) - st->fe_set_voltage(fe, voltage); - - - return (ret < 0) ? -ENODEV : 0; -} - -static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe, - u16 *strength) -{ - struct lme2510_state *st = fe_to_priv(fe); - - *strength = (u16)((u32)st->signal_level * 0xffff / 0xff); - - return 0; -} - -static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr) -{ - struct lme2510_state *st = fe_to_priv(fe); - - *snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f); - - return 0; -} - -static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber) -{ - *ber = 0; - - return 0; -} - -static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) -{ - *ucblocks = 0; - - return 0; -} - -static int lme_name(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *st = adap_to_priv(adap); - const char *desc = d->name; - char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395", - " SHARP:BS2F7HZ0194", " RS2000"}; - char *name = adap->fe[0]->ops.info.name; - - strlcpy(name, desc, 128); - strlcat(name, fe_name[st->tuner_config], 128); - - return 0; -} - -static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *st = d->priv; - int ret = 0; - - st->i2c_talk_onoff = 1; - switch (le16_to_cpu(d->udev->descriptor.idProduct)) { - case 0x1122: - case 0x1120: - st->i2c_gate = 4; - adap->fe[0] = dvb_attach(tda10086_attach, - &tda10086_config, &d->i2c_adap); - if (adap->fe[0]) { - info("TUN Found Frontend TDA10086"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 4; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_LG; - if (st->dvb_usb_lme2510_firmware != TUNER_LG) { - st->dvb_usb_lme2510_firmware = TUNER_LG; - ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV; - } - break; - } - - st->i2c_gate = 4; - adap->fe[0] = dvb_attach(stv0299_attach, - &sharp_z0194_config, &d->i2c_adap); - if (adap->fe[0]) { - info("FE Found Stv0299"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 5; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_S0194; - if (st->dvb_usb_lme2510_firmware != TUNER_S0194) { - st->dvb_usb_lme2510_firmware = TUNER_S0194; - ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV; - } - break; - } - - st->i2c_gate = 5; - adap->fe[0] = dvb_attach(stv0288_attach, &lme_config, - &d->i2c_adap); - - if (adap->fe[0]) { - info("FE Found Stv0288"); - st->i2c_tuner_gate_w = 4; - st->i2c_tuner_gate_r = 5; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_S7395; - if (st->dvb_usb_lme2510_firmware != TUNER_S7395) { - st->dvb_usb_lme2510_firmware = TUNER_S7395; - ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV; - } - break; - } - case 0x22f0: - st->i2c_gate = 5; - adap->fe[0] = dvb_attach(m88rs2000_attach, - &m88rs2000_config, &d->i2c_adap); - - if (adap->fe[0]) { - info("FE Found M88RS2000"); - st->i2c_tuner_gate_w = 5; - st->i2c_tuner_gate_r = 5; - st->i2c_tuner_addr = 0xc0; - st->tuner_config = TUNER_RS2000; - st->fe_set_voltage = - adap->fe[0]->ops.set_voltage; - - adap->fe[0]->ops.read_signal_strength = - dm04_rs2000_read_signal_strength; - adap->fe[0]->ops.read_snr = - dm04_rs2000_read_snr; - adap->fe[0]->ops.read_ber = - dm04_read_ber; - adap->fe[0]->ops.read_ucblocks = - dm04_read_ucblocks; - } - break; - } - - if (adap->fe[0] == NULL) { - info("DM04/QQBOX Not Powered up or not Supported"); - return -ENODEV; - } - - if (ret) { - if (adap->fe[0]) { - dvb_frontend_detach(adap->fe[0]); - adap->fe[0] = NULL; - } - d->rc_map = NULL; - return -ENODEV; - } - - adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage; - ret = lme_name(adap); - return ret; -} - -static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct lme2510_state *st = adap_to_priv(adap); - char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"}; - int ret = 0; - - switch (st->tuner_config) { - case TUNER_LG: - if (dvb_attach(tda826x_attach, adap->fe[0], 0xc0, - &d->i2c_adap, 1)) - ret = st->tuner_config; - break; - case TUNER_S7395: - if (dvb_attach(ix2505v_attach , adap->fe[0], &lme_tuner, - &d->i2c_adap)) - ret = st->tuner_config; - break; - case TUNER_S0194: - if (dvb_attach(dvb_pll_attach , adap->fe[0], 0xc0, - &d->i2c_adap, DVB_PLL_OPERA1)) - ret = st->tuner_config; - break; - case TUNER_RS2000: - ret = st->tuner_config; - break; - default: - break; - } - - if (ret) - info("TUN Found %s tuner", tun_msg[ret]); - else { - info("TUN No tuner found --- resetting device"); - lme_coldreset(d); - return -ENODEV; - } - - /* Start the Interrupt*/ - ret = lme2510_int_read(adap); - if (ret < 0) { - info("INT Unable to start Interrupt Service"); - return -ENODEV; - } - - return ret; -} - -static int lme2510_powerup(struct dvb_usb_device *d, int onoff) -{ - struct lme2510_state *st = d->priv; - static u8 lnb_on[] = LNB_ON; - static u8 lnb_off[] = LNB_OFF; - static u8 rbuf[1]; - int ret = 0, len = 3, rlen = 1; - - mutex_lock(&d->i2c_mutex); - - if (onoff) - ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen); - else - ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen); - - st->i2c_talk_onoff = 1; - - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static int lme2510_get_adapter_count(struct dvb_usb_device *d) -{ - return 1; -} - -static int lme2510_identify_state(struct dvb_usb_device *d, const char **name) -{ - struct lme2510_state *st = d->priv; - - usb_reset_configuration(d->udev); - - usb_set_interface(d->udev, - d->intf->cur_altsetting->desc.bInterfaceNumber, 1); - - st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware; - - if (lme2510_return_status(d) == 0x44) { - *name = lme_firmware_switch(d, 0); - return COLD; - } - - return 0; -} - -static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, - struct usb_data_stream_properties *stream) -{ - struct dvb_usb_adapter *adap = fe_to_adap(fe); - struct dvb_usb_device *d = adap_to_d(adap); - - if (adap == NULL) - return 0; - /* Turn PID filter on the fly by module option */ - if (pid_filter == 2) { - adap->pid_filtering = 1; - adap->max_feed_count = 15; - } - - if (!(le16_to_cpu(d->udev->descriptor.idProduct) - == 0x1122)) - stream->endpoint = 0x8; - - return 0; -} - -static int lme2510_get_rc_config(struct dvb_usb_device *d, - struct dvb_usb_rc *rc) -{ - rc->allowed_protos = RC_TYPE_NEC; - return 0; -} - -static void *lme2510_exit_int(struct dvb_usb_device *d) -{ - struct lme2510_state *st = d->priv; - struct dvb_usb_adapter *adap = &d->adapter[0]; - void *buffer = NULL; - - if (adap != NULL) { - lme2510_kill_urb(&adap->stream); - } - - if (st->usb_buffer != NULL) { - st->i2c_talk_onoff = 1; - st->signal_lock = 0; - st->signal_level = 0; - st->signal_sn = 0; - buffer = st->usb_buffer; - } - - if (st->lme_urb != NULL) { - usb_kill_urb(st->lme_urb); - usb_free_coherent(d->udev, 128, st->buffer, - st->lme_urb->transfer_dma); - info("Interrupt Service Stopped"); - } - - return buffer; -} - -static void lme2510_exit(struct dvb_usb_device *d) -{ - void *usb_buffer; - - if (d != NULL) { - usb_buffer = lme2510_exit_int(d); - if (usb_buffer != NULL) - kfree(usb_buffer); - } -} - -static struct dvb_usb_device_properties lme2510_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .bInterfaceNumber = 0, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct lme2510_state), - - .download_firmware = lme2510_download_firmware, - - .power_ctrl = lme2510_powerup, - .identify_state = lme2510_identify_state, - .i2c_algo = &lme2510_i2c_algo, - - .frontend_attach = dm04_lme2510_frontend_attach, - .tuner_attach = dm04_lme2510_tuner, - .get_stream_config = lme2510_get_stream_config, - .get_adapter_count = lme2510_get_adapter_count, - .streaming_ctrl = lme2510_streaming_ctrl, - - .get_rc_config = lme2510_get_rc_config, - - .exit = lme2510_exit, - .adapter = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER| - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 15, - .pid_filter = lme2510_pid_filter, - .pid_filter_ctrl = lme2510_pid_filter_ctrl, - .stream = - DVB_USB_STREAM_BULK(0x86, 10, 4096), - }, - { - } - }, -}; - -static const struct usb_device_id lme2510_id_table[] = { - { DVB_USB_DEVICE(0x3344, 0x1122, &lme2510_props, - "DM04_LME2510_DVB-S", RC_MAP_LME2510) }, - { DVB_USB_DEVICE(0x3344, 0x1120, &lme2510_props, - "DM04_LME2510C_DVB-S", RC_MAP_LME2510) }, - { DVB_USB_DEVICE(0x3344, 0x22f0, &lme2510_props, - "DM04_LME2510C_DVB-S RS2000", RC_MAP_LME2510) }, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, lme2510_id_table); - -static struct usb_driver lme2510_driver = { - .name = KBUILD_MODNAME, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .id_table = lme2510_id_table, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(lme2510_driver); - -MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); -MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0"); -MODULE_VERSION("2.06"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE(LME2510_C_S7395); -MODULE_FIRMWARE(LME2510_C_LG); -MODULE_FIRMWARE(LME2510_C_S0194); -MODULE_FIRMWARE(LME2510_C_RS2000); -MODULE_FIRMWARE(LME2510_LG); -MODULE_FIRMWARE(LME2510_S0194); - diff --git a/drivers/media/dvb/dvb-usb-v2/lmedm04.h b/drivers/media/dvb/dvb-usb-v2/lmedm04.h deleted file mode 100644 index e9c207205c2f..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/lmedm04.h +++ /dev/null @@ -1,175 +0,0 @@ -/* DVB USB compliant linux driver for - * - * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395 - * LME2510C + LG TDQY-P001F - * LME2510 + LG TDQY-P001F - * - * MVB7395 (LME2510C+SHARP:BS2F7HZ7395) - * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V) - * - * MVB001F (LME2510+LGTDQT-P001F) - * LG TDQY - P001F =(TDA8263 + TDA10086H) - * - * MVB0001F (LME2510C+LGTDQT-P001F) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_LME2510_H_ -#define _DVB_USB_LME2510_H_ - -/* Streamer & PID - * - * Note: These commands do not actually stop the streaming - * but form some kind of packet filtering/stream count - * or tuning related functions. - * 06 XX - * offset 1 = 00 Enable Streaming - * - * - * PID - * 03 XX XX ----> reg number ---> setting....20 XX - * offset 1 = length - * offset 2 = start of data - * end byte -1 = 20 - * end byte = clear pid always a0, other wise 9c, 9a ?? - * -*/ -#define LME_ST_ON_W {0x06, 0x00} -#define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0} -#define LME_ZERO_PID {0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c} -#define LME_ALL_PIDS {0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81} - -/* LNB Voltage - * 07 XX XX - * offset 1 = 01 - * offset 2 = 00=Voltage low 01=Voltage high - * - * LNB Power - * 03 01 XX - * offset 2 = 00=ON 01=OFF - */ - -#define LME_VOLTAGE_L {0x07, 0x01, 0x00} -#define LME_VOLTAGE_H {0x07, 0x01, 0x01} -#define LNB_ON {0x3a, 0x01, 0x00} -#define LNB_OFF {0x3a, 0x01, 0x01} - -/* Initial stv0288 settings for 7395 Frontend */ -static u8 s7395_inittab[] = { - 0x01, 0x15, - 0x02, 0x20, - 0x03, 0xa0, - 0x04, 0xa0, - 0x05, 0x12, - 0x06, 0x00, - 0x09, 0x00, - 0x0a, 0x04, - 0x0b, 0x00, - 0x0c, 0x00, - 0x0d, 0x00, - 0x0e, 0xc1, - 0x0f, 0x54, - 0x11, 0x7a, - 0x12, 0x03, - 0x13, 0x48, - 0x14, 0x84, - 0x15, 0xc5, - 0x16, 0xb8, - 0x17, 0x9c, - 0x18, 0x00, - 0x19, 0xa6, - 0x1a, 0x88, - 0x1b, 0x8f, - 0x1c, 0xf0, - 0x20, 0x0b, - 0x21, 0x54, - 0x22, 0xff, - 0x23, 0x01, - 0x28, 0x46, - 0x29, 0x66, - 0x2a, 0x90, - 0x2b, 0xfa, - 0x2c, 0xd9, - 0x30, 0x0, - 0x31, 0x1e, - 0x32, 0x14, - 0x33, 0x0f, - 0x34, 0x09, - 0x35, 0x0c, - 0x36, 0x05, - 0x37, 0x2f, - 0x38, 0x16, - 0x39, 0xbd, - 0x3a, 0x0, - 0x3b, 0x13, - 0x3c, 0x11, - 0x3d, 0x30, - 0x40, 0x63, - 0x41, 0x04, - 0x42, 0x20, - 0x43, 0x00, - 0x44, 0x00, - 0x45, 0x00, - 0x46, 0x00, - 0x47, 0x00, - 0x4a, 0x00, - 0x50, 0x10, - 0x51, 0x36, - 0x52, 0x21, - 0x53, 0x94, - 0x54, 0xb2, - 0x55, 0x29, - 0x56, 0x64, - 0x57, 0x2b, - 0x58, 0x54, - 0x59, 0x86, - 0x5a, 0x00, - 0x5b, 0x9b, - 0x5c, 0x08, - 0x5d, 0x7f, - 0x5e, 0xff, - 0x5f, 0x8d, - 0x70, 0x0, - 0x71, 0x0, - 0x72, 0x0, - 0x74, 0x0, - 0x75, 0x0, - 0x76, 0x0, - 0x81, 0x0, - 0x82, 0x3f, - 0x83, 0x3f, - 0x84, 0x0, - 0x85, 0x0, - 0x88, 0x0, - 0x89, 0x0, - 0x8a, 0x0, - 0x8b, 0x0, - 0x8c, 0x0, - 0x90, 0x0, - 0x91, 0x0, - 0x92, 0x0, - 0x93, 0x0, - 0x94, 0x1c, - 0x97, 0x0, - 0xa0, 0x48, - 0xa1, 0x0, - 0xb0, 0xb8, - 0xb1, 0x3a, - 0xb2, 0x10, - 0xb3, 0x82, - 0xb4, 0x80, - 0xb5, 0x82, - 0xb6, 0x82, - 0xb7, 0x82, - 0xb8, 0x20, - 0xb9, 0x0, - 0xf0, 0x0, - 0xf1, 0x0, - 0xf2, 0xc0, - 0xff, 0xff, -}; -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-demod.c b/drivers/media/dvb/dvb-usb-v2/mxl111sf-demod.c deleted file mode 100644 index d83df4bb72d3..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-demod.c +++ /dev/null @@ -1,612 +0,0 @@ -/* - * mxl111sf-demod.c - driver for the MaxLinear MXL111SF DVB-T demodulator - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "mxl111sf-demod.h" -#include "mxl111sf-reg.h" - -/* debug */ -static int mxl111sf_demod_debug; -module_param_named(debug, mxl111sf_demod_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); - -#define mxl_dbg(fmt, arg...) \ - if (mxl111sf_demod_debug) \ - mxl_printk(KERN_DEBUG, fmt, ##arg) - -/* ------------------------------------------------------------------------ */ - -struct mxl111sf_demod_state { - struct mxl111sf_state *mxl_state; - - struct mxl111sf_demod_config *cfg; - - struct dvb_frontend fe; -}; - -/* ------------------------------------------------------------------------ */ - -static int mxl111sf_demod_read_reg(struct mxl111sf_demod_state *state, - u8 addr, u8 *data) -{ - return (state->cfg->read_reg) ? - state->cfg->read_reg(state->mxl_state, addr, data) : - -EINVAL; -} - -static int mxl111sf_demod_write_reg(struct mxl111sf_demod_state *state, - u8 addr, u8 data) -{ - return (state->cfg->write_reg) ? - state->cfg->write_reg(state->mxl_state, addr, data) : - -EINVAL; -} - -static -int mxl111sf_demod_program_regs(struct mxl111sf_demod_state *state, - struct mxl111sf_reg_ctrl_info *ctrl_reg_info) -{ - return (state->cfg->program_regs) ? - state->cfg->program_regs(state->mxl_state, ctrl_reg_info) : - -EINVAL; -} - -/* ------------------------------------------------------------------------ */ -/* TPS */ - -static -int mxl1x1sf_demod_get_tps_code_rate(struct mxl111sf_demod_state *state, - fe_code_rate_t *code_rate) -{ - u8 val; - int ret = mxl111sf_demod_read_reg(state, V6_CODE_RATE_TPS_REG, &val); - /* bit<2:0> - 000:1/2, 001:2/3, 010:3/4, 011:5/6, 100:7/8 */ - if (mxl_fail(ret)) - goto fail; - - switch (val & V6_CODE_RATE_TPS_MASK) { - case 0: - *code_rate = FEC_1_2; - break; - case 1: - *code_rate = FEC_2_3; - break; - case 2: - *code_rate = FEC_3_4; - break; - case 3: - *code_rate = FEC_5_6; - break; - case 4: - *code_rate = FEC_7_8; - break; - } -fail: - return ret; -} - -static -int mxl1x1sf_demod_get_tps_modulation(struct mxl111sf_demod_state *state, - fe_modulation_t *modulation) -{ - u8 val; - int ret = mxl111sf_demod_read_reg(state, V6_MODORDER_TPS_REG, &val); - /* Constellation, 00 : QPSK, 01 : 16QAM, 10:64QAM */ - if (mxl_fail(ret)) - goto fail; - - switch ((val & V6_PARAM_CONSTELLATION_MASK) >> 4) { - case 0: - *modulation = QPSK; - break; - case 1: - *modulation = QAM_16; - break; - case 2: - *modulation = QAM_64; - break; - } -fail: - return ret; -} - -static -int mxl1x1sf_demod_get_tps_guard_fft_mode(struct mxl111sf_demod_state *state, - fe_transmit_mode_t *fft_mode) -{ - u8 val; - int ret = mxl111sf_demod_read_reg(state, V6_MODE_TPS_REG, &val); - /* FFT Mode, 00:2K, 01:8K, 10:4K */ - if (mxl_fail(ret)) - goto fail; - - switch ((val & V6_PARAM_FFT_MODE_MASK) >> 2) { - case 0: - *fft_mode = TRANSMISSION_MODE_2K; - break; - case 1: - *fft_mode = TRANSMISSION_MODE_8K; - break; - case 2: - *fft_mode = TRANSMISSION_MODE_4K; - break; - } -fail: - return ret; -} - -static -int mxl1x1sf_demod_get_tps_guard_interval(struct mxl111sf_demod_state *state, - fe_guard_interval_t *guard) -{ - u8 val; - int ret = mxl111sf_demod_read_reg(state, V6_CP_TPS_REG, &val); - /* 00:1/32, 01:1/16, 10:1/8, 11:1/4 */ - if (mxl_fail(ret)) - goto fail; - - switch ((val & V6_PARAM_GI_MASK) >> 4) { - case 0: - *guard = GUARD_INTERVAL_1_32; - break; - case 1: - *guard = GUARD_INTERVAL_1_16; - break; - case 2: - *guard = GUARD_INTERVAL_1_8; - break; - case 3: - *guard = GUARD_INTERVAL_1_4; - break; - } -fail: - return ret; -} - -static -int mxl1x1sf_demod_get_tps_hierarchy(struct mxl111sf_demod_state *state, - fe_hierarchy_t *hierarchy) -{ - u8 val; - int ret = mxl111sf_demod_read_reg(state, V6_TPS_HIERACHY_REG, &val); - /* bit<6:4> - 000:Non hierarchy, 001:1, 010:2, 011:4 */ - if (mxl_fail(ret)) - goto fail; - - switch ((val & V6_TPS_HIERARCHY_INFO_MASK) >> 6) { - case 0: - *hierarchy = HIERARCHY_NONE; - break; - case 1: - *hierarchy = HIERARCHY_1; - break; - case 2: - *hierarchy = HIERARCHY_2; - break; - case 3: - *hierarchy = HIERARCHY_4; - break; - } -fail: - return ret; -} - -/* ------------------------------------------------------------------------ */ -/* LOCKS */ - -static -int mxl1x1sf_demod_get_sync_lock_status(struct mxl111sf_demod_state *state, - int *sync_lock) -{ - u8 val = 0; - int ret = mxl111sf_demod_read_reg(state, V6_SYNC_LOCK_REG, &val); - if (mxl_fail(ret)) - goto fail; - *sync_lock = (val & SYNC_LOCK_MASK) >> 4; -fail: - return ret; -} - -static -int mxl1x1sf_demod_get_rs_lock_status(struct mxl111sf_demod_state *state, - int *rs_lock) -{ - u8 val = 0; - int ret = mxl111sf_demod_read_reg(state, V6_RS_LOCK_DET_REG, &val); - if (mxl_fail(ret)) - goto fail; - *rs_lock = (val & RS_LOCK_DET_MASK) >> 3; -fail: - return ret; -} - -static -int mxl1x1sf_demod_get_tps_lock_status(struct mxl111sf_demod_state *state, - int *tps_lock) -{ - u8 val = 0; - int ret = mxl111sf_demod_read_reg(state, V6_TPS_LOCK_REG, &val); - if (mxl_fail(ret)) - goto fail; - *tps_lock = (val & V6_PARAM_TPS_LOCK_MASK) >> 6; -fail: - return ret; -} - -static -int mxl1x1sf_demod_get_fec_lock_status(struct mxl111sf_demod_state *state, - int *fec_lock) -{ - u8 val = 0; - int ret = mxl111sf_demod_read_reg(state, V6_IRQ_STATUS_REG, &val); - if (mxl_fail(ret)) - goto fail; - *fec_lock = (val & IRQ_MASK_FEC_LOCK) >> 4; -fail: - return ret; -} - -#if 0 -static -int mxl1x1sf_demod_get_cp_lock_status(struct mxl111sf_demod_state *state, - int *cp_lock) -{ - u8 val = 0; - int ret = mxl111sf_demod_read_reg(state, V6_CP_LOCK_DET_REG, &val); - if (mxl_fail(ret)) - goto fail; - *cp_lock = (val & V6_CP_LOCK_DET_MASK) >> 2; -fail: - return ret; -} -#endif - -static int mxl1x1sf_demod_reset_irq_status(struct mxl111sf_demod_state *state) -{ - return mxl111sf_demod_write_reg(state, 0x0e, 0xff); -} - -/* ------------------------------------------------------------------------ */ - -static int mxl111sf_demod_set_frontend(struct dvb_frontend *fe) -{ - struct mxl111sf_demod_state *state = fe->demodulator_priv; - int ret = 0; - - struct mxl111sf_reg_ctrl_info phy_pll_patch[] = { - {0x00, 0xff, 0x01}, /* change page to 1 */ - {0x40, 0xff, 0x05}, - {0x40, 0xff, 0x01}, - {0x41, 0xff, 0xca}, - {0x41, 0xff, 0xc0}, - {0x00, 0xff, 0x00}, /* change page to 0 */ - {0, 0, 0} - }; - - mxl_dbg("()"); - - if (fe->ops.tuner_ops.set_params) { - ret = fe->ops.tuner_ops.set_params(fe); - if (mxl_fail(ret)) - goto fail; - msleep(50); - } - ret = mxl111sf_demod_program_regs(state, phy_pll_patch); - mxl_fail(ret); - msleep(50); - ret = mxl1x1sf_demod_reset_irq_status(state); - mxl_fail(ret); - msleep(100); -fail: - return ret; -} - -/* ------------------------------------------------------------------------ */ - -#if 0 -/* resets TS Packet error count */ -/* After setting 7th bit of V5_PER_COUNT_RESET_REG, it should be reset to 0. */ -static -int mxl1x1sf_demod_reset_packet_error_count(struct mxl111sf_demod_state *state) -{ - struct mxl111sf_reg_ctrl_info reset_per_count[] = { - {0x20, 0x01, 0x01}, - {0x20, 0x01, 0x00}, - {0, 0, 0} - }; - return mxl111sf_demod_program_regs(state, reset_per_count); -} -#endif - -/* returns TS Packet error count */ -/* PER Count = FEC_PER_COUNT * (2 ** (FEC_PER_SCALE * 4)) */ -static int mxl111sf_demod_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) -{ - struct mxl111sf_demod_state *state = fe->demodulator_priv; - u32 fec_per_count, fec_per_scale; - u8 val; - int ret; - - *ucblocks = 0; - - /* FEC_PER_COUNT Register */ - ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_COUNT_REG, &val); - if (mxl_fail(ret)) - goto fail; - - fec_per_count = val; - - /* FEC_PER_SCALE Register */ - ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_SCALE_REG, &val); - if (mxl_fail(ret)) - goto fail; - - val &= V6_FEC_PER_SCALE_MASK; - val *= 4; - - fec_per_scale = 1 << val; - - fec_per_count *= fec_per_scale; - - *ucblocks = fec_per_count; -fail: - return ret; -} - -#ifdef MXL111SF_DEMOD_ENABLE_CALCULATIONS -/* FIXME: leaving this enabled breaks the build on some architectures, - * and we shouldn't have any floating point math in the kernel, anyway. - * - * These macros need to be re-written, but it's harmless to simply - * return zero for now. */ -#define CALCULATE_BER(avg_errors, count) \ - ((u32)(avg_errors * 4)/(count*64*188*8)) -#define CALCULATE_SNR(data) \ - ((u32)((10 * (u32)data / 64) - 2.5)) -#else -#define CALCULATE_BER(avg_errors, count) 0 -#define CALCULATE_SNR(data) 0 -#endif - -static int mxl111sf_demod_read_ber(struct dvb_frontend *fe, u32 *ber) -{ - struct mxl111sf_demod_state *state = fe->demodulator_priv; - u8 val1, val2, val3; - int ret; - - *ber = 0; - - ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_LSB_REG, &val1); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_MSB_REG, &val2); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_demod_read_reg(state, V6_N_ACCUMULATE_REG, &val3); - if (mxl_fail(ret)) - goto fail; - - *ber = CALCULATE_BER((val1 | (val2 << 8)), val3); -fail: - return ret; -} - -static int mxl111sf_demod_calc_snr(struct mxl111sf_demod_state *state, - u16 *snr) -{ - u8 val1, val2; - int ret; - - *snr = 0; - - ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_LSB_REG, &val1); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_MSB_REG, &val2); - if (mxl_fail(ret)) - goto fail; - - *snr = CALCULATE_SNR(val1 | ((val2 & 0x03) << 8)); -fail: - return ret; -} - -static int mxl111sf_demod_read_snr(struct dvb_frontend *fe, u16 *snr) -{ - struct mxl111sf_demod_state *state = fe->demodulator_priv; - - int ret = mxl111sf_demod_calc_snr(state, snr); - if (mxl_fail(ret)) - goto fail; - - *snr /= 10; /* 0.1 dB */ -fail: - return ret; -} - -static int mxl111sf_demod_read_status(struct dvb_frontend *fe, - fe_status_t *status) -{ - struct mxl111sf_demod_state *state = fe->demodulator_priv; - int ret, locked, cr_lock, sync_lock, fec_lock; - - *status = 0; - - ret = mxl1x1sf_demod_get_rs_lock_status(state, &locked); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_demod_get_tps_lock_status(state, &cr_lock); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_demod_get_sync_lock_status(state, &sync_lock); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_demod_get_fec_lock_status(state, &fec_lock); - if (mxl_fail(ret)) - goto fail; - - if (locked) - *status |= FE_HAS_SIGNAL; - if (cr_lock) - *status |= FE_HAS_CARRIER; - if (sync_lock) - *status |= FE_HAS_SYNC; - if (fec_lock) /* false positives? */ - *status |= FE_HAS_VITERBI; - - if ((locked) && (cr_lock) && (sync_lock)) - *status |= FE_HAS_LOCK; -fail: - return ret; -} - -static int mxl111sf_demod_read_signal_strength(struct dvb_frontend *fe, - u16 *signal_strength) -{ - struct mxl111sf_demod_state *state = fe->demodulator_priv; - fe_modulation_t modulation; - u16 snr; - - mxl111sf_demod_calc_snr(state, &snr); - mxl1x1sf_demod_get_tps_modulation(state, &modulation); - - switch (modulation) { - case QPSK: - *signal_strength = (snr >= 1300) ? - min(65535, snr * 44) : snr * 38; - break; - case QAM_16: - *signal_strength = (snr >= 1500) ? - min(65535, snr * 38) : snr * 33; - break; - case QAM_64: - *signal_strength = (snr >= 2000) ? - min(65535, snr * 29) : snr * 25; - break; - default: - *signal_strength = 0; - return -EINVAL; - } - - return 0; -} - -static int mxl111sf_demod_get_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct mxl111sf_demod_state *state = fe->demodulator_priv; - - mxl_dbg("()"); -#if 0 - p->inversion = /* FIXME */ ? INVERSION_ON : INVERSION_OFF; -#endif - if (fe->ops.tuner_ops.get_bandwidth) - fe->ops.tuner_ops.get_bandwidth(fe, &p->bandwidth_hz); - if (fe->ops.tuner_ops.get_frequency) - fe->ops.tuner_ops.get_frequency(fe, &p->frequency); - mxl1x1sf_demod_get_tps_code_rate(state, &p->code_rate_HP); - mxl1x1sf_demod_get_tps_code_rate(state, &p->code_rate_LP); - mxl1x1sf_demod_get_tps_modulation(state, &p->modulation); - mxl1x1sf_demod_get_tps_guard_fft_mode(state, - &p->transmission_mode); - mxl1x1sf_demod_get_tps_guard_interval(state, - &p->guard_interval); - mxl1x1sf_demod_get_tps_hierarchy(state, - &p->hierarchy); - - return 0; -} - -static -int mxl111sf_demod_get_tune_settings(struct dvb_frontend *fe, - struct dvb_frontend_tune_settings *tune) -{ - tune->min_delay_ms = 1000; - return 0; -} - -static void mxl111sf_demod_release(struct dvb_frontend *fe) -{ - struct mxl111sf_demod_state *state = fe->demodulator_priv; - mxl_dbg("()"); - kfree(state); - fe->demodulator_priv = NULL; -} - -static struct dvb_frontend_ops mxl111sf_demod_ops = { - .delsys = { SYS_DVBT }, - .info = { - .name = "MaxLinear MxL111SF DVB-T demodulator", - .frequency_min = 177000000, - .frequency_max = 858000000, - .frequency_stepsize = 166666, - .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | - FE_CAN_QAM_AUTO | - FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER - }, - .release = mxl111sf_demod_release, -#if 0 - .init = mxl111sf_init, - .i2c_gate_ctrl = mxl111sf_i2c_gate_ctrl, -#endif - .set_frontend = mxl111sf_demod_set_frontend, - .get_frontend = mxl111sf_demod_get_frontend, - .get_tune_settings = mxl111sf_demod_get_tune_settings, - .read_status = mxl111sf_demod_read_status, - .read_signal_strength = mxl111sf_demod_read_signal_strength, - .read_ber = mxl111sf_demod_read_ber, - .read_snr = mxl111sf_demod_read_snr, - .read_ucblocks = mxl111sf_demod_read_ucblocks, -}; - -struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state, - struct mxl111sf_demod_config *cfg) -{ - struct mxl111sf_demod_state *state = NULL; - - mxl_dbg("()"); - - state = kzalloc(sizeof(struct mxl111sf_demod_state), GFP_KERNEL); - if (state == NULL) - return NULL; - - state->mxl_state = mxl_state; - state->cfg = cfg; - - memcpy(&state->fe.ops, &mxl111sf_demod_ops, - sizeof(struct dvb_frontend_ops)); - - state->fe.demodulator_priv = state; - return &state->fe; -} -EXPORT_SYMBOL_GPL(mxl111sf_demod_attach); - -MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver"); -MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("0.1"); - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-demod.h b/drivers/media/dvb/dvb-usb-v2/mxl111sf-demod.h deleted file mode 100644 index 432706ae5274..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-demod.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * mxl111sf-demod.h - driver for the MaxLinear MXL111SF DVB-T demodulator - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MXL111SF_DEMOD_H__ -#define __MXL111SF_DEMOD_H__ - -#include "dvb_frontend.h" -#include "mxl111sf.h" - -struct mxl111sf_demod_config { - int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data); - int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data); - int (*program_regs)(struct mxl111sf_state *state, - struct mxl111sf_reg_ctrl_info *ctrl_reg_info); -}; - -#if defined(CONFIG_DVB_USB_MXL111SF) || \ - (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE)) -extern -struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state, - struct mxl111sf_demod_config *cfg); -#else -static inline -struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state, - struct mxl111sf_demod_config *cfg) -{ - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; -} -#endif /* CONFIG_DVB_USB_MXL111SF */ - -#endif /* __MXL111SF_DEMOD_H__ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-gpio.c b/drivers/media/dvb/dvb-usb-v2/mxl111sf-gpio.c deleted file mode 100644 index e4121cb8f5ef..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-gpio.c +++ /dev/null @@ -1,763 +0,0 @@ -/* - * mxl111sf-gpio.c - driver for the MaxLinear MXL111SF - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "mxl111sf-gpio.h" -#include "mxl111sf-i2c.h" -#include "mxl111sf.h" - -/* ------------------------------------------------------------------------- */ - -#define MXL_GPIO_MUX_REG_0 0x84 -#define MXL_GPIO_MUX_REG_1 0x89 -#define MXL_GPIO_MUX_REG_2 0x82 - -#define MXL_GPIO_DIR_INPUT 0 -#define MXL_GPIO_DIR_OUTPUT 1 - - -static int mxl111sf_set_gpo_state(struct mxl111sf_state *state, u8 pin, u8 val) -{ - int ret; - u8 tmp; - - mxl_debug_adv("(%d, %d)", pin, val); - - if ((pin > 0) && (pin < 8)) { - ret = mxl111sf_read_reg(state, 0x19, &tmp); - if (mxl_fail(ret)) - goto fail; - tmp &= ~(1 << (pin - 1)); - tmp |= (val << (pin - 1)); - ret = mxl111sf_write_reg(state, 0x19, tmp); - if (mxl_fail(ret)) - goto fail; - } else if (pin <= 10) { - if (pin == 0) - pin += 7; - ret = mxl111sf_read_reg(state, 0x30, &tmp); - if (mxl_fail(ret)) - goto fail; - tmp &= ~(1 << (pin - 3)); - tmp |= (val << (pin - 3)); - ret = mxl111sf_write_reg(state, 0x30, tmp); - if (mxl_fail(ret)) - goto fail; - } else - ret = -EINVAL; -fail: - return ret; -} - -static int mxl111sf_get_gpi_state(struct mxl111sf_state *state, u8 pin, u8 *val) -{ - int ret; - u8 tmp; - - mxl_debug("(0x%02x)", pin); - - *val = 0; - - switch (pin) { - case 0: - case 1: - case 2: - case 3: - ret = mxl111sf_read_reg(state, 0x23, &tmp); - if (mxl_fail(ret)) - goto fail; - *val = (tmp >> (pin + 4)) & 0x01; - break; - case 4: - case 5: - case 6: - case 7: - ret = mxl111sf_read_reg(state, 0x2f, &tmp); - if (mxl_fail(ret)) - goto fail; - *val = (tmp >> pin) & 0x01; - break; - case 8: - case 9: - case 10: - ret = mxl111sf_read_reg(state, 0x22, &tmp); - if (mxl_fail(ret)) - goto fail; - *val = (tmp >> (pin - 3)) & 0x01; - break; - default: - return -EINVAL; /* invalid pin */ - } -fail: - return ret; -} - -struct mxl_gpio_cfg { - u8 pin; - u8 dir; - u8 val; -}; - -static int mxl111sf_config_gpio_pins(struct mxl111sf_state *state, - struct mxl_gpio_cfg *gpio_cfg) -{ - int ret; - u8 tmp; - - mxl_debug_adv("(%d, %d)", gpio_cfg->pin, gpio_cfg->dir); - - switch (gpio_cfg->pin) { - case 0: - case 1: - case 2: - case 3: - ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_0, &tmp); - if (mxl_fail(ret)) - goto fail; - tmp &= ~(1 << (gpio_cfg->pin + 4)); - tmp |= (gpio_cfg->dir << (gpio_cfg->pin + 4)); - ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_0, tmp); - if (mxl_fail(ret)) - goto fail; - break; - case 4: - case 5: - case 6: - case 7: - ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_1, &tmp); - if (mxl_fail(ret)) - goto fail; - tmp &= ~(1 << gpio_cfg->pin); - tmp |= (gpio_cfg->dir << gpio_cfg->pin); - ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_1, tmp); - if (mxl_fail(ret)) - goto fail; - break; - case 8: - case 9: - case 10: - ret = mxl111sf_read_reg(state, MXL_GPIO_MUX_REG_2, &tmp); - if (mxl_fail(ret)) - goto fail; - tmp &= ~(1 << (gpio_cfg->pin - 3)); - tmp |= (gpio_cfg->dir << (gpio_cfg->pin - 3)); - ret = mxl111sf_write_reg(state, MXL_GPIO_MUX_REG_2, tmp); - if (mxl_fail(ret)) - goto fail; - break; - default: - return -EINVAL; /* invalid pin */ - } - - ret = (MXL_GPIO_DIR_OUTPUT == gpio_cfg->dir) ? - mxl111sf_set_gpo_state(state, - gpio_cfg->pin, gpio_cfg->val) : - mxl111sf_get_gpi_state(state, - gpio_cfg->pin, &gpio_cfg->val); - mxl_fail(ret); -fail: - return ret; -} - -static int mxl111sf_hw_do_set_gpio(struct mxl111sf_state *state, - int gpio, int direction, int val) -{ - struct mxl_gpio_cfg gpio_config = { - .pin = gpio, - .dir = direction, - .val = val, - }; - - mxl_debug("(%d, %d, %d)", gpio, direction, val); - - return mxl111sf_config_gpio_pins(state, &gpio_config); -} - -/* ------------------------------------------------------------------------- */ - -#define PIN_MUX_MPEG_MODE_MASK 0x40 /* 0x17 <6> */ -#define PIN_MUX_MPEG_PAR_EN_MASK 0x01 /* 0x18 <0> */ -#define PIN_MUX_MPEG_SER_EN_MASK 0x02 /* 0x18 <1> */ -#define PIN_MUX_MPG_IN_MUX_MASK 0x80 /* 0x3D <7> */ -#define PIN_MUX_BT656_ENABLE_MASK 0x04 /* 0x12 <2> */ -#define PIN_MUX_I2S_ENABLE_MASK 0x40 /* 0x15 <6> */ -#define PIN_MUX_SPI_MODE_MASK 0x10 /* 0x3D <4> */ -#define PIN_MUX_MCLK_EN_CTRL_MASK 0x10 /* 0x82 <4> */ -#define PIN_MUX_MPSYN_EN_CTRL_MASK 0x20 /* 0x82 <5> */ -#define PIN_MUX_MDVAL_EN_CTRL_MASK 0x40 /* 0x82 <6> */ -#define PIN_MUX_MPERR_EN_CTRL_MASK 0x80 /* 0x82 <7> */ -#define PIN_MUX_MDAT_EN_0_MASK 0x10 /* 0x84 <4> */ -#define PIN_MUX_MDAT_EN_1_MASK 0x20 /* 0x84 <5> */ -#define PIN_MUX_MDAT_EN_2_MASK 0x40 /* 0x84 <6> */ -#define PIN_MUX_MDAT_EN_3_MASK 0x80 /* 0x84 <7> */ -#define PIN_MUX_MDAT_EN_4_MASK 0x10 /* 0x89 <4> */ -#define PIN_MUX_MDAT_EN_5_MASK 0x20 /* 0x89 <5> */ -#define PIN_MUX_MDAT_EN_6_MASK 0x40 /* 0x89 <6> */ -#define PIN_MUX_MDAT_EN_7_MASK 0x80 /* 0x89 <7> */ - -int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state, - enum mxl111sf_mux_config pin_mux_config) -{ - u8 r12, r15, r17, r18, r3D, r82, r84, r89; - int ret; - - mxl_debug("(%d)", pin_mux_config); - - ret = mxl111sf_read_reg(state, 0x17, &r17); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_read_reg(state, 0x18, &r18); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_read_reg(state, 0x12, &r12); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_read_reg(state, 0x15, &r15); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_read_reg(state, 0x82, &r82); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_read_reg(state, 0x84, &r84); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_read_reg(state, 0x89, &r89); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_read_reg(state, 0x3D, &r3D); - if (mxl_fail(ret)) - goto fail; - - switch (pin_mux_config) { - case PIN_MUX_TS_OUT_PARALLEL: - /* mpeg_mode = 1 */ - r17 |= PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 1 */ - r18 |= PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 0 */ - r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 0 */ - r15 &= ~PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 1 */ - r82 |= PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 1 */ - r82 |= PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 1 */ - r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 1 */ - r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0xF */ - r84 |= 0xF0; - /* mdat_en_ctrl[7:4] = 0xF */ - r89 |= 0xF0; - break; - case PIN_MUX_TS_OUT_SERIAL: - /* mpeg_mode = 1 */ - r17 |= PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 1 */ - r18 |= PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 0 */ - r15 &= ~PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 1 */ - r82 |= PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 1 */ - r82 |= PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 1 */ - r82 |= PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 1 */ - r82 |= PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0xF */ - r84 |= 0xF0; - /* mdat_en_ctrl[7:4] = 0xF */ - r89 |= 0xF0; - break; - case PIN_MUX_GPIO_MODE: - /* mpeg_mode = 0 */ - r17 &= ~PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 0 */ - r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 0 */ - r15 &= ~PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - case PIN_MUX_TS_SERIAL_IN_MODE_0: - /* mpeg_mode = 0 */ - r17 &= ~PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 1 */ - r18 |= PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 0 */ - r15 &= ~PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - case PIN_MUX_TS_SERIAL_IN_MODE_1: - /* mpeg_mode = 0 */ - r17 &= ~PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 1 */ - r18 |= PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 1 */ - r3D |= PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 0 */ - r15 &= ~PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - case PIN_MUX_TS_SPI_IN_MODE_1: - /* mpeg_mode = 0 */ - r17 &= ~PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 1 */ - r18 |= PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 1 */ - r3D |= PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 1 */ - r15 |= PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 1 */ - r3D |= PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - case PIN_MUX_TS_SPI_IN_MODE_0: - /* mpeg_mode = 0 */ - r17 &= ~PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 1 */ - r18 |= PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 1 */ - r15 |= PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 1 */ - r3D |= PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - case PIN_MUX_TS_PARALLEL_IN: - /* mpeg_mode = 0 */ - r17 &= ~PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 1 */ - r18 |= PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 0 */ - r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 0 */ - r15 &= ~PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - case PIN_MUX_BT656_I2S_MODE: - /* mpeg_mode = 0 */ - r17 &= ~PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 0 */ - r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 1 */ - r12 |= PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 1 */ - r15 |= PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - case PIN_MUX_DEFAULT: - default: - /* mpeg_mode = 1 */ - r17 |= PIN_MUX_MPEG_MODE_MASK; - /* mpeg_par_en = 0 */ - r18 &= ~PIN_MUX_MPEG_PAR_EN_MASK; - /* mpeg_ser_en = 0 */ - r18 &= ~PIN_MUX_MPEG_SER_EN_MASK; - /* mpg_in_mux = 0 */ - r3D &= ~PIN_MUX_MPG_IN_MUX_MASK; - /* bt656_enable = 0 */ - r12 &= ~PIN_MUX_BT656_ENABLE_MASK; - /* i2s_enable = 0 */ - r15 &= ~PIN_MUX_I2S_ENABLE_MASK; - /* spi_mode = 0 */ - r3D &= ~PIN_MUX_SPI_MODE_MASK; - /* mclk_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MCLK_EN_CTRL_MASK; - /* mperr_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPERR_EN_CTRL_MASK; - /* mdval_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MDVAL_EN_CTRL_MASK; - /* mpsyn_en_ctrl = 0 */ - r82 &= ~PIN_MUX_MPSYN_EN_CTRL_MASK; - /* mdat_en_ctrl[3:0] = 0x0 */ - r84 &= 0x0F; - /* mdat_en_ctrl[7:4] = 0x0 */ - r89 &= 0x0F; - break; - } - - ret = mxl111sf_write_reg(state, 0x17, r17); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x18, r18); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x12, r12); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x15, r15); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x82, r82); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x84, r84); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x89, r89); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x3D, r3D); - if (mxl_fail(ret)) - goto fail; -fail: - return ret; -} - -/* ------------------------------------------------------------------------- */ - -static int mxl111sf_hw_set_gpio(struct mxl111sf_state *state, int gpio, int val) -{ - return mxl111sf_hw_do_set_gpio(state, gpio, MXL_GPIO_DIR_OUTPUT, val); -} - -static int mxl111sf_hw_gpio_initialize(struct mxl111sf_state *state) -{ - u8 gpioval = 0x07; /* write protect enabled, signal LEDs off */ - int i, ret; - - mxl_debug("()"); - - for (i = 3; i < 8; i++) { - ret = mxl111sf_hw_set_gpio(state, i, (gpioval >> i) & 0x01); - if (mxl_fail(ret)) - break; - } - - return ret; -} - -#define PCA9534_I2C_ADDR (0x40 >> 1) -static int pca9534_set_gpio(struct mxl111sf_state *state, int gpio, int val) -{ - u8 w[2] = { 1, 0 }; - u8 r = 0; - struct i2c_msg msg[] = { - { .addr = PCA9534_I2C_ADDR, - .flags = 0, .buf = w, .len = 1 }, - { .addr = PCA9534_I2C_ADDR, - .flags = I2C_M_RD, .buf = &r, .len = 1 }, - }; - - mxl_debug("(%d, %d)", gpio, val); - - /* read current GPIO levels from flip-flop */ - i2c_transfer(&state->d->i2c_adap, msg, 2); - - /* prepare write buffer with current GPIO levels */ - msg[0].len = 2; -#if 0 - w[0] = 1; -#endif - w[1] = r; - - /* clear the desired GPIO */ - w[1] &= ~(1 << gpio); - - /* set the desired GPIO value */ - w[1] |= ((val ? 1 : 0) << gpio); - - /* write new GPIO levels to flip-flop */ - i2c_transfer(&state->d->i2c_adap, &msg[0], 1); - - return 0; -} - -static int pca9534_init_port_expander(struct mxl111sf_state *state) -{ - u8 w[2] = { 1, 0x07 }; /* write protect enabled, signal LEDs off */ - - struct i2c_msg msg = { - .addr = PCA9534_I2C_ADDR, - .flags = 0, .buf = w, .len = 2 - }; - - mxl_debug("()"); - - i2c_transfer(&state->d->i2c_adap, &msg, 1); - - /* configure all pins as outputs */ - w[0] = 3; - w[1] = 0; - - i2c_transfer(&state->d->i2c_adap, &msg, 1); - - return 0; -} - -int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val) -{ - mxl_debug("(%d, %d)", gpio, val); - - switch (state->gpio_port_expander) { - default: - mxl_printk(KERN_ERR, - "gpio_port_expander undefined, assuming PCA9534"); - /* fall-thru */ - case mxl111sf_PCA9534: - return pca9534_set_gpio(state, gpio, val); - case mxl111sf_gpio_hw: - return mxl111sf_hw_set_gpio(state, gpio, val); - } -} - -static int mxl111sf_probe_port_expander(struct mxl111sf_state *state) -{ - int ret; - u8 w = 1; - u8 r = 0; - struct i2c_msg msg[] = { - { .flags = 0, .buf = &w, .len = 1 }, - { .flags = I2C_M_RD, .buf = &r, .len = 1 }, - }; - - mxl_debug("()"); - - msg[0].addr = 0x70 >> 1; - msg[1].addr = 0x70 >> 1; - - /* read current GPIO levels from flip-flop */ - ret = i2c_transfer(&state->d->i2c_adap, msg, 2); - if (ret == 2) { - state->port_expander_addr = msg[0].addr; - state->gpio_port_expander = mxl111sf_PCA9534; - mxl_debug("found port expander at 0x%02x", - state->port_expander_addr); - return 0; - } - - msg[0].addr = 0x40 >> 1; - msg[1].addr = 0x40 >> 1; - - ret = i2c_transfer(&state->d->i2c_adap, msg, 2); - if (ret == 2) { - state->port_expander_addr = msg[0].addr; - state->gpio_port_expander = mxl111sf_PCA9534; - mxl_debug("found port expander at 0x%02x", - state->port_expander_addr); - return 0; - } - state->port_expander_addr = 0xff; - state->gpio_port_expander = mxl111sf_gpio_hw; - mxl_debug("using hardware gpio"); - return 0; -} - -int mxl111sf_init_port_expander(struct mxl111sf_state *state) -{ - mxl_debug("()"); - - if (0x00 == state->port_expander_addr) - mxl111sf_probe_port_expander(state); - - switch (state->gpio_port_expander) { - default: - mxl_printk(KERN_ERR, - "gpio_port_expander undefined, assuming PCA9534"); - /* fall-thru */ - case mxl111sf_PCA9534: - return pca9534_init_port_expander(state); - case mxl111sf_gpio_hw: - return mxl111sf_hw_gpio_initialize(state); - } -} - -/* ------------------------------------------------------------------------ */ - -int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode) -{ -/* GPO: - * 3 - ATSC/MH# | 1 = ATSC transport, 0 = MH transport | default 0 - * 4 - ATSC_RST## | 1 = ATSC enable, 0 = ATSC Reset | default 0 - * 5 - ATSC_EN | 1 = ATSC power enable, 0 = ATSC power off | default 0 - * 6 - MH_RESET# | 1 = MH enable, 0 = MH Reset | default 0 - * 7 - MH_EN | 1 = MH power enable, 0 = MH power off | default 0 - */ - mxl_debug("(%d)", mode); - - switch (mode) { - case MXL111SF_GPIO_MOD_MH: - mxl111sf_set_gpio(state, 4, 0); - mxl111sf_set_gpio(state, 5, 0); - msleep(50); - mxl111sf_set_gpio(state, 7, 1); - msleep(50); - mxl111sf_set_gpio(state, 6, 1); - msleep(50); - - mxl111sf_set_gpio(state, 3, 0); - break; - case MXL111SF_GPIO_MOD_ATSC: - mxl111sf_set_gpio(state, 6, 0); - mxl111sf_set_gpio(state, 7, 0); - msleep(50); - mxl111sf_set_gpio(state, 5, 1); - msleep(50); - mxl111sf_set_gpio(state, 4, 1); - msleep(50); - mxl111sf_set_gpio(state, 3, 1); - break; - default: /* DVBT / STANDBY */ - mxl111sf_init_port_expander(state); - break; - } - return 0; -} - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-gpio.h b/drivers/media/dvb/dvb-usb-v2/mxl111sf-gpio.h deleted file mode 100644 index 0220f54299a5..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-gpio.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * mxl111sf-gpio.h - driver for the MaxLinear MXL111SF - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _DVB_USB_MXL111SF_GPIO_H_ -#define _DVB_USB_MXL111SF_GPIO_H_ - -#include "mxl111sf.h" - -int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val); -int mxl111sf_init_port_expander(struct mxl111sf_state *state); - -#define MXL111SF_GPIO_MOD_DVBT 0 -#define MXL111SF_GPIO_MOD_MH 1 -#define MXL111SF_GPIO_MOD_ATSC 2 -int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode); - -enum mxl111sf_mux_config { - PIN_MUX_DEFAULT = 0, - PIN_MUX_TS_OUT_PARALLEL, - PIN_MUX_TS_OUT_SERIAL, - PIN_MUX_GPIO_MODE, - PIN_MUX_TS_SERIAL_IN_MODE_0, - PIN_MUX_TS_SERIAL_IN_MODE_1, - PIN_MUX_TS_SPI_IN_MODE_0, - PIN_MUX_TS_SPI_IN_MODE_1, - PIN_MUX_TS_PARALLEL_IN, - PIN_MUX_BT656_I2S_MODE, -}; - -int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state, - enum mxl111sf_mux_config pin_mux_config); - -#endif /* _DVB_USB_MXL111SF_GPIO_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.c deleted file mode 100644 index 34434557ef65..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.c +++ /dev/null @@ -1,850 +0,0 @@ -/* - * mxl111sf-i2c.c - driver for the MaxLinear MXL111SF - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "mxl111sf-i2c.h" -#include "mxl111sf.h" - -/* SW-I2C ----------------------------------------------------------------- */ - -#define SW_I2C_ADDR 0x1a -#define SW_I2C_EN 0x02 -#define SW_SCL_OUT 0x04 -#define SW_SDA_OUT 0x08 -#define SW_SDA_IN 0x04 - -#define SW_I2C_BUSY_ADDR 0x2f -#define SW_I2C_BUSY 0x02 - -static int mxl111sf_i2c_bitbang_sendbyte(struct mxl111sf_state *state, - u8 byte) -{ - int i, ret; - u8 data = 0; - - mxl_i2c("(0x%02x)", byte); - - ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data); - if (mxl_fail(ret)) - goto fail; - - for (i = 0; i < 8; i++) { - - data = (byte & (0x80 >> i)) ? SW_SDA_OUT : 0; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | data); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | data | SW_SCL_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | data); - if (mxl_fail(ret)) - goto fail; - } - - /* last bit was 0 so we need to release SDA */ - if (!(byte & 1)) { - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - } - - /* CLK high for ACK readback */ - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data); - if (mxl_fail(ret)) - goto fail; - - /* drop the CLK after getting ACK, SDA will go high right away */ - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - - if (data & SW_SDA_IN) - ret = -EIO; -fail: - return ret; -} - -static int mxl111sf_i2c_bitbang_recvbyte(struct mxl111sf_state *state, - u8 *pbyte) -{ - int i, ret; - u8 byte = 0; - u8 data = 0; - - mxl_i2c("()"); - - *pbyte = 0; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - - for (i = 0; i < 8; i++) { - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | - SW_SCL_OUT | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data); - if (mxl_fail(ret)) - goto fail; - - if (data & SW_SDA_IN) - byte |= (0x80 >> i); - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - } - *pbyte = byte; -fail: - return ret; -} - -static int mxl111sf_i2c_start(struct mxl111sf_state *state) -{ - int ret; - - mxl_i2c("()"); - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SCL_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN); /* start */ - mxl_fail(ret); -fail: - return ret; -} - -static int mxl111sf_i2c_stop(struct mxl111sf_state *state) -{ - int ret; - - mxl_i2c("()"); - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN); /* stop */ - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SCL_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_SCL_OUT | SW_SDA_OUT); - mxl_fail(ret); -fail: - return ret; -} - -static int mxl111sf_i2c_ack(struct mxl111sf_state *state) -{ - int ret; - u8 b = 0; - - mxl_i2c("()"); - - ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &b); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN); - if (mxl_fail(ret)) - goto fail; - - /* pull SDA low */ - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SCL_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SDA_OUT); - mxl_fail(ret); -fail: - return ret; -} - -static int mxl111sf_i2c_nack(struct mxl111sf_state *state) -{ - int ret; - - mxl_i2c("()"); - - /* SDA high to signal last byte read from slave */ - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, SW_I2C_ADDR, - 0x10 | SW_I2C_EN | SW_SDA_OUT); - mxl_fail(ret); -fail: - return ret; -} - -/* ------------------------------------------------------------------------ */ - -static int mxl111sf_i2c_sw_xfer_msg(struct mxl111sf_state *state, - struct i2c_msg *msg) -{ - int i, ret; - - mxl_i2c("()"); - - if (msg->flags & I2C_M_RD) { - - ret = mxl111sf_i2c_start(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_i2c_bitbang_sendbyte(state, - (msg->addr << 1) | 0x01); - if (mxl_fail(ret)) { - mxl111sf_i2c_stop(state); - goto fail; - } - - for (i = 0; i < msg->len; i++) { - ret = mxl111sf_i2c_bitbang_recvbyte(state, - &msg->buf[i]); - if (mxl_fail(ret)) { - mxl111sf_i2c_stop(state); - goto fail; - } - - if (i < msg->len - 1) - mxl111sf_i2c_ack(state); - } - - mxl111sf_i2c_nack(state); - - ret = mxl111sf_i2c_stop(state); - if (mxl_fail(ret)) - goto fail; - - } else { - - ret = mxl111sf_i2c_start(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_i2c_bitbang_sendbyte(state, - (msg->addr << 1) & 0xfe); - if (mxl_fail(ret)) { - mxl111sf_i2c_stop(state); - goto fail; - } - - for (i = 0; i < msg->len; i++) { - ret = mxl111sf_i2c_bitbang_sendbyte(state, - msg->buf[i]); - if (mxl_fail(ret)) { - mxl111sf_i2c_stop(state); - goto fail; - } - } - - /* FIXME: we only want to do this on the last transaction */ - mxl111sf_i2c_stop(state); - } -fail: - return ret; -} - -/* HW-I2C ----------------------------------------------------------------- */ - -#define USB_WRITE_I2C_CMD 0x99 -#define USB_READ_I2C_CMD 0xdd -#define USB_END_I2C_CMD 0xfe - -#define USB_WRITE_I2C_CMD_LEN 26 -#define USB_READ_I2C_CMD_LEN 24 - -#define I2C_MUX_REG 0x30 -#define I2C_CONTROL_REG 0x00 -#define I2C_SLAVE_ADDR_REG 0x08 -#define I2C_DATA_REG 0x0c -#define I2C_INT_STATUS_REG 0x10 - -static int mxl111sf_i2c_send_data(struct mxl111sf_state *state, - u8 index, u8 *wdata) -{ - int ret = mxl111sf_ctrl_msg(state->d, wdata[0], - &wdata[1], 25, NULL, 0); - mxl_fail(ret); - - return ret; -} - -static int mxl111sf_i2c_get_data(struct mxl111sf_state *state, - u8 index, u8 *wdata, u8 *rdata) -{ - int ret = mxl111sf_ctrl_msg(state->d, wdata[0], - &wdata[1], 25, rdata, 24); - mxl_fail(ret); - - return ret; -} - -static u8 mxl111sf_i2c_check_status(struct mxl111sf_state *state) -{ - u8 status = 0; - u8 buf[26]; - - mxl_i2c_adv("()"); - - buf[0] = USB_READ_I2C_CMD; - buf[1] = 0x00; - - buf[2] = I2C_INT_STATUS_REG; - buf[3] = 0x00; - buf[4] = 0x00; - - buf[5] = USB_END_I2C_CMD; - - mxl111sf_i2c_get_data(state, 0, buf, buf); - - if (buf[1] & 0x04) - status = 1; - - return status; -} - -static u8 mxl111sf_i2c_check_fifo(struct mxl111sf_state *state) -{ - u8 status = 0; - u8 buf[26]; - - mxl_i2c("()"); - - buf[0] = USB_READ_I2C_CMD; - buf[1] = 0x00; - - buf[2] = I2C_MUX_REG; - buf[3] = 0x00; - buf[4] = 0x00; - - buf[5] = I2C_INT_STATUS_REG; - buf[6] = 0x00; - buf[7] = 0x00; - buf[8] = USB_END_I2C_CMD; - - mxl111sf_i2c_get_data(state, 0, buf, buf); - - if (0x08 == (buf[1] & 0x08)) - status = 1; - - if ((buf[5] & 0x02) == 0x02) - mxl_i2c("(buf[5] & 0x02) == 0x02"); /* FIXME */ - - return status; -} - -static int mxl111sf_i2c_readagain(struct mxl111sf_state *state, - u8 count, u8 *rbuf) -{ - u8 i2c_w_data[26]; - u8 i2c_r_data[24]; - u8 i = 0; - u8 fifo_status = 0; - int status = 0; - - mxl_i2c("read %d bytes", count); - - while ((fifo_status == 0) && (i++ < 5)) - fifo_status = mxl111sf_i2c_check_fifo(state); - - i2c_w_data[0] = 0xDD; - i2c_w_data[1] = 0x00; - - for (i = 2; i < 26; i++) - i2c_w_data[i] = 0xFE; - - for (i = 0; i < count; i++) { - i2c_w_data[2+(i*3)] = 0x0C; - i2c_w_data[3+(i*3)] = 0x00; - i2c_w_data[4+(i*3)] = 0x00; - } - - mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data); - - /* Check for I2C NACK status */ - if (mxl111sf_i2c_check_status(state) == 1) { - mxl_i2c("error!"); - } else { - for (i = 0; i < count; i++) { - rbuf[i] = i2c_r_data[(i*3)+1]; - mxl_i2c("%02x\t %02x", - i2c_r_data[(i*3)+1], - i2c_r_data[(i*3)+2]); - } - - status = 1; - } - - return status; -} - -#define HWI2C400 1 -static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state, - struct i2c_msg *msg) -{ - int i, k, ret = 0; - u16 index = 0; - u8 buf[26]; - u8 i2c_r_data[24]; - u16 block_len; - u16 left_over_len; - u8 rd_status[8]; - u8 ret_status; - u8 readbuff[26]; - - mxl_i2c("addr: 0x%02x, read buff len: %d, write buff len: %d", - msg->addr, (msg->flags & I2C_M_RD) ? msg->len : 0, - (!(msg->flags & I2C_M_RD)) ? msg->len : 0); - - for (index = 0; index < 26; index++) - buf[index] = USB_END_I2C_CMD; - - /* command to indicate data payload is destined for I2C interface */ - buf[0] = USB_WRITE_I2C_CMD; - buf[1] = 0x00; - - /* enable I2C interface */ - buf[2] = I2C_MUX_REG; - buf[3] = 0x80; - buf[4] = 0x00; - - /* enable I2C interface */ - buf[5] = I2C_MUX_REG; - buf[6] = 0x81; - buf[7] = 0x00; - - /* set Timeout register on I2C interface */ - buf[8] = 0x14; - buf[9] = 0xff; - buf[10] = 0x00; -#if 0 - /* enable Interrupts on I2C interface */ - buf[8] = 0x24; - buf[9] = 0xF7; - buf[10] = 0x00; -#endif - buf[11] = 0x24; - buf[12] = 0xF7; - buf[13] = 0x00; - - ret = mxl111sf_i2c_send_data(state, 0, buf); - - /* write data on I2C bus */ - if (!(msg->flags & I2C_M_RD) && (msg->len > 0)) { - mxl_i2c("%d\t%02x", msg->len, msg->buf[0]); - - /* control register on I2C interface to initialize I2C bus */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0x5E; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - - /* I2C Slave device Address */ - buf[5] = I2C_SLAVE_ADDR_REG; - buf[6] = (msg->addr); - buf[7] = 0x00; - buf[8] = USB_END_I2C_CMD; - ret = mxl111sf_i2c_send_data(state, 0, buf); - - /* check for slave device status */ - if (mxl111sf_i2c_check_status(state) == 1) { - mxl_i2c("NACK writing slave address %02x", - msg->addr); - /* if NACK, stop I2C bus and exit */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0x4E; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - ret = -EIO; - goto exit; - } - - /* I2C interface can do I2C operations in block of 8 bytes of - I2C data. calculation to figure out number of blocks of i2c - data required to program */ - block_len = (msg->len / 8); - left_over_len = (msg->len % 8); - index = 0; - - mxl_i2c("block_len %d, left_over_len %d", - block_len, left_over_len); - - for (index = 0; index < block_len; index++) { - for (i = 0; i < 8; i++) { - /* write data on I2C interface */ - buf[2+(i*3)] = I2C_DATA_REG; - buf[3+(i*3)] = msg->buf[(index*8)+i]; - buf[4+(i*3)] = 0x00; - } - - ret = mxl111sf_i2c_send_data(state, 0, buf); - - /* check for I2C NACK status */ - if (mxl111sf_i2c_check_status(state) == 1) { - mxl_i2c("NACK writing slave address %02x", - msg->addr); - - /* if NACK, stop I2C bus and exit */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0x4E; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - ret = -EIO; - goto exit; - } - - } - - if (left_over_len) { - for (k = 0; k < 26; k++) - buf[k] = USB_END_I2C_CMD; - - buf[0] = 0x99; - buf[1] = 0x00; - - for (i = 0; i < left_over_len; i++) { - buf[2+(i*3)] = I2C_DATA_REG; - buf[3+(i*3)] = msg->buf[(index*8)+i]; - mxl_i2c("index = %d %d data %d", - index, i, msg->buf[(index*8)+i]); - buf[4+(i*3)] = 0x00; - } - ret = mxl111sf_i2c_send_data(state, 0, buf); - - /* check for I2C NACK status */ - if (mxl111sf_i2c_check_status(state) == 1) { - mxl_i2c("NACK writing slave address %02x", - msg->addr); - - /* if NACK, stop I2C bus and exit */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0x4E; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - ret = -EIO; - goto exit; - } - - } - - /* issue I2C STOP after write */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0x4E; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - - } - - /* read data from I2C bus */ - if ((msg->flags & I2C_M_RD) && (msg->len > 0)) { - mxl_i2c("read buf len %d", msg->len); - - /* command to indicate data payload is - destined for I2C interface */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0xDF; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - - /* I2C xfer length */ - buf[5] = 0x14; - buf[6] = (msg->len & 0xFF); - buf[7] = 0; - - /* I2C slave device Address */ - buf[8] = I2C_SLAVE_ADDR_REG; - buf[9] = msg->addr; - buf[10] = 0x00; - buf[11] = USB_END_I2C_CMD; - ret = mxl111sf_i2c_send_data(state, 0, buf); - - /* check for I2C NACK status */ - if (mxl111sf_i2c_check_status(state) == 1) { - mxl_i2c("NACK reading slave address %02x", - msg->addr); - - /* if NACK, stop I2C bus and exit */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0xC7; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - ret = -EIO; - goto exit; - } - - /* I2C interface can do I2C operations in block of 8 bytes of - I2C data. calculation to figure out number of blocks of - i2c data required to program */ - block_len = ((msg->len) / 8); - left_over_len = ((msg->len) % 8); - index = 0; - - mxl_i2c("block_len %d, left_over_len %d", - block_len, left_over_len); - - /* command to read data from I2C interface */ - buf[0] = USB_READ_I2C_CMD; - buf[1] = 0x00; - - for (index = 0; index < block_len; index++) { - /* setup I2C read request packet on I2C interface */ - for (i = 0; i < 8; i++) { - buf[2+(i*3)] = I2C_DATA_REG; - buf[3+(i*3)] = 0x00; - buf[4+(i*3)] = 0x00; - } - - ret = mxl111sf_i2c_get_data(state, 0, buf, i2c_r_data); - - /* check for I2C NACK status */ - if (mxl111sf_i2c_check_status(state) == 1) { - mxl_i2c("NACK reading slave address %02x", - msg->addr); - - /* if NACK, stop I2C bus and exit */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0xC7; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - ret = -EIO; - goto exit; - } - - /* copy data from i2c data payload to read buffer */ - for (i = 0; i < 8; i++) { - rd_status[i] = i2c_r_data[(i*3)+2]; - - if (rd_status[i] == 0x04) { - if (i < 7) { - mxl_i2c("i2c fifo empty!" - " @ %d", i); - msg->buf[(index*8)+i] = - i2c_r_data[(i*3)+1]; - /* read again */ - ret_status = - mxl111sf_i2c_readagain( - state, 8-(i+1), - readbuff); - if (ret_status == 1) { - for (k = 0; - k < 8-(i+1); - k++) { - - msg->buf[(index*8)+(k+i+1)] = - readbuff[k]; - mxl_i2c("read data: %02x\t %02x", - msg->buf[(index*8)+(k+i)], - (index*8)+(k+i)); - mxl_i2c("read data: %02x\t %02x", - msg->buf[(index*8)+(k+i+1)], - readbuff[k]); - - } - goto stop_copy; - } else { - mxl_i2c("readagain " - "ERROR!"); - } - } else { - msg->buf[(index*8)+i] = - i2c_r_data[(i*3)+1]; - } - } else { - msg->buf[(index*8)+i] = - i2c_r_data[(i*3)+1]; - } - } -stop_copy: - ; - - } - - if (left_over_len) { - for (k = 0; k < 26; k++) - buf[k] = USB_END_I2C_CMD; - - buf[0] = 0xDD; - buf[1] = 0x00; - - for (i = 0; i < left_over_len; i++) { - buf[2+(i*3)] = I2C_DATA_REG; - buf[3+(i*3)] = 0x00; - buf[4+(i*3)] = 0x00; - } - ret = mxl111sf_i2c_get_data(state, 0, buf, - i2c_r_data); - - /* check for I2C NACK status */ - if (mxl111sf_i2c_check_status(state) == 1) { - mxl_i2c("NACK reading slave address %02x", - msg->addr); - - /* if NACK, stop I2C bus and exit */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0xC7; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - ret = -EIO; - goto exit; - } - - for (i = 0; i < left_over_len; i++) { - msg->buf[(block_len*8)+i] = - i2c_r_data[(i*3)+1]; - mxl_i2c("read data: %02x\t %02x", - i2c_r_data[(i*3)+1], - i2c_r_data[(i*3)+2]); - } - } - - /* indicate I2C interface to issue NACK - after next I2C read op */ - buf[0] = USB_WRITE_I2C_CMD; - buf[1] = 0x00; - - /* control register */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0x17; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - - buf[5] = USB_END_I2C_CMD; - ret = mxl111sf_i2c_send_data(state, 0, buf); - - /* control register */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0xC7; - buf[4] = (HWI2C400) ? 0x03 : 0x0D; - - } -exit: - /* STOP and disable I2C MUX */ - buf[0] = USB_WRITE_I2C_CMD; - buf[1] = 0x00; - - /* de-initilize I2C BUS */ - buf[5] = USB_END_I2C_CMD; - mxl111sf_i2c_send_data(state, 0, buf); - - /* Control Register */ - buf[2] = I2C_CONTROL_REG; - buf[3] = 0xDF; - buf[4] = 0x03; - - /* disable I2C interface */ - buf[5] = I2C_MUX_REG; - buf[6] = 0x00; - buf[7] = 0x00; - - /* de-initilize I2C BUS */ - buf[8] = USB_END_I2C_CMD; - mxl111sf_i2c_send_data(state, 0, buf); - - /* disable I2C interface */ - buf[2] = I2C_MUX_REG; - buf[3] = 0x81; - buf[4] = 0x00; - - /* disable I2C interface */ - buf[5] = I2C_MUX_REG; - buf[6] = 0x00; - buf[7] = 0x00; - - /* disable I2C interface */ - buf[8] = I2C_MUX_REG; - buf[9] = 0x00; - buf[10] = 0x00; - - buf[11] = USB_END_I2C_CMD; - mxl111sf_i2c_send_data(state, 0, buf); - - return ret; -} - -/* ------------------------------------------------------------------------ */ - -int mxl111sf_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct mxl111sf_state *state = d->priv; - int hwi2c = (state->chip_rev > MXL111SF_V6); - int i, ret; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - ret = (hwi2c) ? - mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) : - mxl111sf_i2c_sw_xfer_msg(state, &msg[i]); - if (mxl_fail(ret)) { - mxl_debug_adv("failed with error %d on i2c " - "transaction %d of %d, %sing %d bytes " - "to/from 0x%02x", ret, i+1, num, - (msg[i].flags & I2C_M_RD) ? - "read" : "writ", - msg[i].len, msg[i].addr); - - break; - } - } - - mutex_unlock(&d->i2c_mutex); - - return i == num ? num : -EREMOTEIO; -} - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.h b/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.h deleted file mode 100644 index a57a45ffb9e4..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * mxl111sf-i2c.h - driver for the MaxLinear MXL111SF - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _DVB_USB_MXL111SF_I2C_H_ -#define _DVB_USB_MXL111SF_I2C_H_ - -#include <linux/i2c.h> - -int mxl111sf_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg msg[], int num); - -#endif /* _DVB_USB_MXL111SF_I2C_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-phy.c b/drivers/media/dvb/dvb-usb-v2/mxl111sf-phy.c deleted file mode 100644 index b741b3a7a325..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-phy.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * mxl111sf-phy.c - driver for the MaxLinear MXL111SF - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "mxl111sf-phy.h" -#include "mxl111sf-reg.h" - -int mxl111sf_init_tuner_demod(struct mxl111sf_state *state) -{ - struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = { - {0x07, 0xff, 0x0c}, - {0x58, 0xff, 0x9d}, - {0x09, 0xff, 0x00}, - {0x06, 0xff, 0x06}, - {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */ - {0x8d, 0x01, 0x01}, /* NEGATE_Q */ - {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */ - {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */ - {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */ - {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */ - {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */ - {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */ - {0x88, 0xff, 0xf0}, /* INF_THD = 240 */ - {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */ - {0x00, 0xff, 0x01}, /* Change to page 1 */ - {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */ - {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */ - {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */ - {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */ - {0x00, 0xff, 0x00}, /* Change to page 0 */ - {0, 0, 0} - }; - - mxl_debug("()"); - - return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default); -} - -int mxl1x1sf_soft_reset(struct mxl111sf_state *state) -{ - int ret; - mxl_debug("()"); - - ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */ - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */ - mxl_fail(ret); -fail: - return ret; -} - -int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode) -{ - int ret; - - mxl_debug("(%s)", MXL_SOC_MODE == mode ? - "MXL_SOC_MODE" : "MXL_TUNER_MODE"); - - /* set device mode */ - ret = mxl111sf_write_reg(state, 0x03, - MXL_SOC_MODE == mode ? 0x01 : 0x00); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg_mask(state, - 0x7d, 0x40, MXL_SOC_MODE == mode ? - 0x00 : /* enable impulse noise filter, - INF_BYP = 0 */ - 0x40); /* disable impulse noise filter, - INF_BYP = 1 */ - if (mxl_fail(ret)) - goto fail; - - state->device_mode = mode; -fail: - return ret; -} - -/* power up tuner */ -int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff) -{ - mxl_debug("(%d)", onoff); - - return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00); -} - -int mxl111sf_disable_656_port(struct mxl111sf_state *state) -{ - mxl_debug("()"); - - return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00); -} - -int mxl111sf_enable_usb_output(struct mxl111sf_state *state) -{ - mxl_debug("()"); - - return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00); -} - -/* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */ -int mxl111sf_config_mpeg_in(struct mxl111sf_state *state, - unsigned int parallel_serial, - unsigned int msb_lsb_1st, - unsigned int clock_phase, - unsigned int mpeg_valid_pol, - unsigned int mpeg_sync_pol) -{ - int ret; - u8 mode, tmp; - - mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st, - clock_phase, mpeg_valid_pol, mpeg_sync_pol); - - /* Enable PIN MUX */ - ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX); - mxl_fail(ret); - - /* Configure MPEG Clock phase */ - mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode); - - if (clock_phase == TSIF_NORMAL) - mode &= ~V6_INVERTED_CLK_PHASE; - else - mode |= V6_INVERTED_CLK_PHASE; - - ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode); - mxl_fail(ret); - - /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity - * Get current configuration */ - ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode); - mxl_fail(ret); - - /* Data Input mode */ - if (parallel_serial == TSIF_INPUT_PARALLEL) { - /* Disable serial mode */ - mode &= ~V6_MPEG_IN_DATA_SERIAL; - - /* Enable Parallel mode */ - mode |= V6_MPEG_IN_DATA_PARALLEL; - } else { - /* Disable Parallel mode */ - mode &= ~V6_MPEG_IN_DATA_PARALLEL; - - /* Enable Serial Mode */ - mode |= V6_MPEG_IN_DATA_SERIAL; - - /* If serial interface is chosen, configure - MSB or LSB order in transmission */ - ret = mxl111sf_read_reg(state, - V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, - &tmp); - mxl_fail(ret); - - if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED) - tmp |= V6_MPEG_SER_MSB_FIRST; - else - tmp &= ~V6_MPEG_SER_MSB_FIRST; - - ret = mxl111sf_write_reg(state, - V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, - tmp); - mxl_fail(ret); - } - - /* MPEG Sync polarity */ - if (mpeg_sync_pol == TSIF_NORMAL) - mode &= ~V6_INVERTED_MPEG_SYNC; - else - mode |= V6_INVERTED_MPEG_SYNC; - - /* MPEG Valid polarity */ - if (mpeg_valid_pol == 0) - mode &= ~V6_INVERTED_MPEG_VALID; - else - mode |= V6_INVERTED_MPEG_VALID; - - ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode); - mxl_fail(ret); - - return ret; -} - -int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size) -{ - static struct mxl111sf_reg_ctrl_info init_i2s[] = { - {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */ - {0x15, 0x60, 0x60}, /* Enable I2S */ - {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB, - Inverted 656 Clock, I2S_SOFT_RESET, - 0 : Normal operation, 1 : Reset State */ -#if 0 - {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */ -#endif - {0x00, 0xff, 0x02}, /* Change to Control Page */ - {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */ - {0x00, 0xff, 0x00}, - {0, 0, 0} - }; - int ret; - - mxl_debug("(0x%02x)", sample_size); - - ret = mxl111sf_ctrl_program_regs(state, init_i2s); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size); - mxl_fail(ret); -fail: - return ret; -} - -int mxl111sf_disable_i2s_port(struct mxl111sf_state *state) -{ - static struct mxl111sf_reg_ctrl_info disable_i2s[] = { - {0x15, 0x40, 0x00}, - {0, 0, 0} - }; - - mxl_debug("()"); - - return mxl111sf_ctrl_program_regs(state, disable_i2s); -} - -int mxl111sf_config_i2s(struct mxl111sf_state *state, - u8 msb_start_pos, u8 data_width) -{ - int ret; - u8 tmp; - - mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width); - - ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp); - if (mxl_fail(ret)) - goto fail; - - tmp &= 0xe0; - tmp |= msb_start_pos; - ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp); - if (mxl_fail(ret)) - goto fail; - - tmp &= 0xe0; - tmp |= data_width; - ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp); - mxl_fail(ret); -fail: - return ret; -} - -int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff) -{ - u8 val; - int ret; - - mxl_debug("(%d)", onoff); - - ret = mxl111sf_write_reg(state, 0x00, 0x02); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val); - if (mxl_fail(ret)) - goto fail; - - if (onoff) - val |= 0x04; - else - val &= ~0x04; - - ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_write_reg(state, 0x00, 0x00); - mxl_fail(ret); -fail: - return ret; -} - -int mxl111sf_idac_config(struct mxl111sf_state *state, - u8 control_mode, u8 current_setting, - u8 current_value, u8 hysteresis_value) -{ - int ret; - u8 val; - /* current value will be set for both automatic & manual IDAC control */ - val = current_value; - - if (control_mode == IDAC_MANUAL_CONTROL) { - /* enable manual control of IDAC */ - val |= IDAC_MANUAL_CONTROL_BIT_MASK; - - if (current_setting == IDAC_CURRENT_SINKING_ENABLE) - /* enable current sinking in manual mode */ - val |= IDAC_CURRENT_SINKING_BIT_MASK; - else - /* disable current sinking in manual mode */ - val &= ~IDAC_CURRENT_SINKING_BIT_MASK; - } else { - /* disable manual control of IDAC */ - val &= ~IDAC_MANUAL_CONTROL_BIT_MASK; - - /* set hysteresis value reg: 0x0B<5:0> */ - ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG, - (hysteresis_value & 0x3F)); - mxl_fail(ret); - } - - ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); - mxl_fail(ret); - - return ret; -} - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-phy.h b/drivers/media/dvb/dvb-usb-v2/mxl111sf-phy.h deleted file mode 100644 index f0756071d347..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-phy.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * mxl111sf-phy.h - driver for the MaxLinear MXL111SF - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _DVB_USB_MXL111SF_PHY_H_ -#define _DVB_USB_MXL111SF_PHY_H_ - -#include "mxl111sf.h" - -int mxl1x1sf_soft_reset(struct mxl111sf_state *state); -int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode); -int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff); -int mxl111sf_disable_656_port(struct mxl111sf_state *state); -int mxl111sf_init_tuner_demod(struct mxl111sf_state *state); -int mxl111sf_enable_usb_output(struct mxl111sf_state *state); -int mxl111sf_config_mpeg_in(struct mxl111sf_state *state, - unsigned int parallel_serial, - unsigned int msb_lsb_1st, - unsigned int clock_phase, - unsigned int mpeg_valid_pol, - unsigned int mpeg_sync_pol); -int mxl111sf_config_i2s(struct mxl111sf_state *state, - u8 msb_start_pos, u8 data_width); -int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size); -int mxl111sf_disable_i2s_port(struct mxl111sf_state *state); -int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff); -int mxl111sf_idac_config(struct mxl111sf_state *state, - u8 control_mode, u8 current_setting, - u8 current_value, u8 hysteresis_value); - -#endif /* _DVB_USB_MXL111SF_PHY_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-reg.h b/drivers/media/dvb/dvb-usb-v2/mxl111sf-reg.h deleted file mode 100644 index 17831b0fb9db..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-reg.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * mxl111sf-reg.h - driver for the MaxLinear MXL111SF - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _DVB_USB_MXL111SF_REG_H_ -#define _DVB_USB_MXL111SF_REG_H_ - -#define CHIP_ID_REG 0xFC -#define TOP_CHIP_REV_ID_REG 0xFA - -#define V6_SNR_RB_LSB_REG 0x27 -#define V6_SNR_RB_MSB_REG 0x28 - -#define V6_N_ACCUMULATE_REG 0x11 -#define V6_RS_AVG_ERRORS_LSB_REG 0x2C -#define V6_RS_AVG_ERRORS_MSB_REG 0x2D - -#define V6_IRQ_STATUS_REG 0x24 -#define IRQ_MASK_FEC_LOCK 0x10 - -#define V6_SYNC_LOCK_REG 0x28 -#define SYNC_LOCK_MASK 0x10 - -#define V6_RS_LOCK_DET_REG 0x28 -#define RS_LOCK_DET_MASK 0x08 - -#define V6_INITACQ_NODETECT_REG 0x20 -#define V6_FORCE_NFFT_CPSIZE_REG 0x20 - -#define V6_CODE_RATE_TPS_REG 0x29 -#define V6_CODE_RATE_TPS_MASK 0x07 - - -#define V6_CP_LOCK_DET_REG 0x28 -#define V6_CP_LOCK_DET_MASK 0x04 - -#define V6_TPS_HIERACHY_REG 0x29 -#define V6_TPS_HIERARCHY_INFO_MASK 0x40 - -#define V6_MODORDER_TPS_REG 0x2A -#define V6_PARAM_CONSTELLATION_MASK 0x30 - -#define V6_MODE_TPS_REG 0x2A -#define V6_PARAM_FFT_MODE_MASK 0x0C - - -#define V6_CP_TPS_REG 0x29 -#define V6_PARAM_GI_MASK 0x30 - -#define V6_TPS_LOCK_REG 0x2A -#define V6_PARAM_TPS_LOCK_MASK 0x40 - -#define V6_FEC_PER_COUNT_REG 0x2E -#define V6_FEC_PER_SCALE_REG 0x2B -#define V6_FEC_PER_SCALE_MASK 0x03 -#define V6_FEC_PER_CLR_REG 0x20 -#define V6_FEC_PER_CLR_MASK 0x01 - -#define V6_PIN_MUX_MODE_REG 0x1B -#define V6_ENABLE_PIN_MUX 0x1E - -#define V6_I2S_NUM_SAMPLES_REG 0x16 - -#define V6_MPEG_IN_CLK_INV_REG 0x17 -#define V6_MPEG_IN_CTRL_REG 0x18 - -#define V6_INVERTED_CLK_PHASE 0x20 -#define V6_MPEG_IN_DATA_PARALLEL 0x01 -#define V6_MPEG_IN_DATA_SERIAL 0x02 - -#define V6_INVERTED_MPEG_SYNC 0x04 -#define V6_INVERTED_MPEG_VALID 0x08 - -#define TSIF_INPUT_PARALLEL 0 -#define TSIF_INPUT_SERIAL 1 -#define TSIF_NORMAL 0 - -#define V6_MPEG_INOUT_BIT_ORDER_CTRL_REG 0x19 -#define V6_MPEG_SER_MSB_FIRST 0x80 -#define MPEG_SER_MSB_FIRST_ENABLED 0x01 - -#define V6_656_I2S_BUFF_STATUS_REG 0x2F -#define V6_656_OVERFLOW_MASK_BIT 0x08 -#define V6_I2S_OVERFLOW_MASK_BIT 0x01 - -#define V6_I2S_STREAM_START_BIT_REG 0x14 -#define V6_I2S_STREAM_END_BIT_REG 0x15 -#define I2S_RIGHT_JUSTIFIED 0 -#define I2S_LEFT_JUSTIFIED 1 -#define I2S_DATA_FORMAT 2 - -#define V6_TUNER_LOOP_THRU_CONTROL_REG 0x09 -#define V6_ENABLE_LOOP_THRU 0x01 - -#define TOTAL_NUM_IF_OUTPUT_FREQ 16 - -#define TUNER_NORMAL_IF_SPECTRUM 0x0 -#define TUNER_INVERT_IF_SPECTRUM 0x10 - -#define V6_TUNER_IF_SEL_REG 0x06 -#define V6_TUNER_IF_FCW_REG 0x3C -#define V6_TUNER_IF_FCW_BYP_REG 0x3D -#define V6_RF_LOCK_STATUS_REG 0x23 - -#define NUM_DIG_TV_CHANNEL 1000 - -#define V6_DIG_CLK_FREQ_SEL_REG 0x07 -#define V6_REF_SYNTH_INT_REG 0x5C -#define V6_REF_SYNTH_REMAIN_REG 0x58 -#define V6_DIG_RFREFSELECT_REG 0x32 -#define V6_XTAL_CLK_OUT_GAIN_REG 0x31 -#define V6_TUNER_LOOP_THRU_CTRL_REG 0x09 -#define V6_DIG_XTAL_ENABLE_REG 0x06 -#define V6_DIG_XTAL_BIAS_REG 0x66 -#define V6_XTAL_CAP_REG 0x08 - -#define V6_GPO_CTRL_REG 0x18 -#define MXL_GPO_0 0x00 -#define MXL_GPO_1 0x01 -#define V6_GPO_0_MASK 0x10 -#define V6_GPO_1_MASK 0x20 - -#define V6_111SF_GPO_CTRL_REG 0x19 -#define MXL_111SF_GPO_1 0x00 -#define MXL_111SF_GPO_2 0x01 -#define MXL_111SF_GPO_3 0x02 -#define MXL_111SF_GPO_4 0x03 -#define MXL_111SF_GPO_5 0x04 -#define MXL_111SF_GPO_6 0x05 -#define MXL_111SF_GPO_7 0x06 - -#define MXL_111SF_GPO_0_MASK 0x01 -#define MXL_111SF_GPO_1_MASK 0x02 -#define MXL_111SF_GPO_2_MASK 0x04 -#define MXL_111SF_GPO_3_MASK 0x08 -#define MXL_111SF_GPO_4_MASK 0x10 -#define MXL_111SF_GPO_5_MASK 0x20 -#define MXL_111SF_GPO_6_MASK 0x40 - -#define V6_ATSC_CONFIG_REG 0x0A - -#define MXL_MODE_REG 0x03 -#define START_TUNE_REG 0x1C - -#define V6_IDAC_HYSTERESIS_REG 0x0B -#define V6_IDAC_SETTINGS_REG 0x0C -#define IDAC_MANUAL_CONTROL 1 -#define IDAC_CURRENT_SINKING_ENABLE 1 -#define IDAC_MANUAL_CONTROL_BIT_MASK 0x80 -#define IDAC_CURRENT_SINKING_BIT_MASK 0x40 - -#define V8_SPI_MODE_REG 0xE9 - -#define V6_DIG_RF_PWR_LSB_REG 0x46 -#define V6_DIG_RF_PWR_MSB_REG 0x47 - -#endif /* _DVB_USB_MXL111SF_REG_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-tuner.c b/drivers/media/dvb/dvb-usb-v2/mxl111sf-tuner.c deleted file mode 100644 index ef4c65fcbb73..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-tuner.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "mxl111sf-tuner.h" -#include "mxl111sf-phy.h" -#include "mxl111sf-reg.h" - -/* debug */ -static int mxl111sf_tuner_debug; -module_param_named(debug, mxl111sf_tuner_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); - -#define mxl_dbg(fmt, arg...) \ - if (mxl111sf_tuner_debug) \ - mxl_printk(KERN_DEBUG, fmt, ##arg) - -#define err pr_err - -/* ------------------------------------------------------------------------ */ - -struct mxl111sf_tuner_state { - struct mxl111sf_state *mxl_state; - - struct mxl111sf_tuner_config *cfg; - - enum mxl_if_freq if_freq; - - u32 frequency; - u32 bandwidth; -}; - -static int mxl111sf_tuner_read_reg(struct mxl111sf_tuner_state *state, - u8 addr, u8 *data) -{ - return (state->cfg->read_reg) ? - state->cfg->read_reg(state->mxl_state, addr, data) : - -EINVAL; -} - -static int mxl111sf_tuner_write_reg(struct mxl111sf_tuner_state *state, - u8 addr, u8 data) -{ - return (state->cfg->write_reg) ? - state->cfg->write_reg(state->mxl_state, addr, data) : - -EINVAL; -} - -static int mxl111sf_tuner_program_regs(struct mxl111sf_tuner_state *state, - struct mxl111sf_reg_ctrl_info *ctrl_reg_info) -{ - return (state->cfg->program_regs) ? - state->cfg->program_regs(state->mxl_state, ctrl_reg_info) : - -EINVAL; -} - -static int mxl1x1sf_tuner_top_master_ctrl(struct mxl111sf_tuner_state *state, - int onoff) -{ - return (state->cfg->top_master_ctrl) ? - state->cfg->top_master_ctrl(state->mxl_state, onoff) : - -EINVAL; -} - -/* ------------------------------------------------------------------------ */ - -static struct mxl111sf_reg_ctrl_info mxl_phy_tune_rf[] = { - {0x1d, 0x7f, 0x00}, /* channel bandwidth section 1/2/3, - DIG_MODEINDEX, _A, _CSF, */ - {0x1e, 0xff, 0x00}, /* channel frequency (lo and fractional) */ - {0x1f, 0xff, 0x00}, /* channel frequency (hi for integer portion) */ - {0, 0, 0} -}; - -/* ------------------------------------------------------------------------ */ - -static struct mxl111sf_reg_ctrl_info *mxl111sf_calc_phy_tune_regs(u32 freq, - u8 bw) -{ - u8 filt_bw; - - /* set channel bandwidth */ - switch (bw) { - case 0: /* ATSC */ - filt_bw = 25; - break; - case 1: /* QAM */ - filt_bw = 69; - break; - case 6: - filt_bw = 21; - break; - case 7: - filt_bw = 42; - break; - case 8: - filt_bw = 63; - break; - default: - err("%s: invalid bandwidth setting!", __func__); - return NULL; - } - - /* calculate RF channel */ - freq /= 1000000; - - freq *= 64; -#if 0 - /* do round */ - freq += 0.5; -#endif - /* set bandwidth */ - mxl_phy_tune_rf[0].data = filt_bw; - - /* set RF */ - mxl_phy_tune_rf[1].data = (freq & 0xff); - mxl_phy_tune_rf[2].data = (freq >> 8) & 0xff; - - /* start tune */ - return mxl_phy_tune_rf; -} - -static int mxl1x1sf_tuner_set_if_output_freq(struct mxl111sf_tuner_state *state) -{ - int ret; - u8 ctrl; -#if 0 - u16 iffcw; - u32 if_freq; -#endif - mxl_dbg("(IF polarity = %d, IF freq = 0x%02x)", - state->cfg->invert_spectrum, state->cfg->if_freq); - - /* set IF polarity */ - ctrl = state->cfg->invert_spectrum; - - ctrl |= state->cfg->if_freq; - - ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_SEL_REG, ctrl); - if (mxl_fail(ret)) - goto fail; - -#if 0 - if_freq /= 1000000; - - /* do round */ - if_freq += 0.5; - - if (MXL_IF_LO == state->cfg->if_freq) { - ctrl = 0x08; - iffcw = (u16)(if_freq / (108 * 4096)); - } else if (MXL_IF_HI == state->cfg->if_freq) { - ctrl = 0x08; - iffcw = (u16)(if_freq / (216 * 4096)); - } else { - ctrl = 0; - iffcw = 0; - } - - ctrl |= (iffcw >> 8); -#endif - ret = mxl111sf_tuner_read_reg(state, V6_TUNER_IF_FCW_BYP_REG, &ctrl); - if (mxl_fail(ret)) - goto fail; - - ctrl &= 0xf0; - ctrl |= 0x90; - - ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_BYP_REG, ctrl); - if (mxl_fail(ret)) - goto fail; - -#if 0 - ctrl = iffcw & 0x00ff; -#endif - ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_REG, ctrl); - if (mxl_fail(ret)) - goto fail; - - state->if_freq = state->cfg->if_freq; -fail: - return ret; -} - -static int mxl1x1sf_tune_rf(struct dvb_frontend *fe, u32 freq, u8 bw) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - static struct mxl111sf_reg_ctrl_info *reg_ctrl_array; - int ret; - u8 mxl_mode; - - mxl_dbg("(freq = %d, bw = 0x%x)", freq, bw); - - /* stop tune */ - ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 0); - if (mxl_fail(ret)) - goto fail; - - /* check device mode */ - ret = mxl111sf_tuner_read_reg(state, MXL_MODE_REG, &mxl_mode); - if (mxl_fail(ret)) - goto fail; - - /* Fill out registers for channel tune */ - reg_ctrl_array = mxl111sf_calc_phy_tune_regs(freq, bw); - if (!reg_ctrl_array) - return -EINVAL; - - ret = mxl111sf_tuner_program_regs(state, reg_ctrl_array); - if (mxl_fail(ret)) - goto fail; - - if ((mxl_mode & MXL_DEV_MODE_MASK) == MXL_TUNER_MODE) { - /* IF tuner mode only */ - mxl1x1sf_tuner_top_master_ctrl(state, 0); - mxl1x1sf_tuner_top_master_ctrl(state, 1); - mxl1x1sf_tuner_set_if_output_freq(state); - } - - ret = mxl111sf_tuner_write_reg(state, START_TUNE_REG, 1); - if (mxl_fail(ret)) - goto fail; - - if (state->cfg->ant_hunt) - state->cfg->ant_hunt(fe); -fail: - return ret; -} - -static int mxl1x1sf_tuner_get_lock_status(struct mxl111sf_tuner_state *state, - int *rf_synth_lock, - int *ref_synth_lock) -{ - int ret; - u8 data; - - *rf_synth_lock = 0; - *ref_synth_lock = 0; - - ret = mxl111sf_tuner_read_reg(state, V6_RF_LOCK_STATUS_REG, &data); - if (mxl_fail(ret)) - goto fail; - - *ref_synth_lock = ((data & 0x03) == 0x03) ? 1 : 0; - *rf_synth_lock = ((data & 0x0c) == 0x0c) ? 1 : 0; -fail: - return ret; -} - -#if 0 -static int mxl1x1sf_tuner_loop_thru_ctrl(struct mxl111sf_tuner_state *state, - int onoff) -{ - return mxl111sf_tuner_write_reg(state, V6_TUNER_LOOP_THRU_CTRL_REG, - onoff ? 1 : 0); -} -#endif - -/* ------------------------------------------------------------------------ */ - -static int mxl111sf_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - u32 delsys = c->delivery_system; - struct mxl111sf_tuner_state *state = fe->tuner_priv; - int ret; - u8 bw; - - mxl_dbg("()"); - - switch (delsys) { - case SYS_ATSC: - case SYS_ATSCMH: - bw = 0; /* ATSC */ - break; - case SYS_DVBC_ANNEX_B: - bw = 1; /* US CABLE */ - break; - case SYS_DVBT: - switch (c->bandwidth_hz) { - case 6000000: - bw = 6; - break; - case 7000000: - bw = 7; - break; - case 8000000: - bw = 8; - break; - default: - err("%s: bandwidth not set!", __func__); - return -EINVAL; - } - break; - default: - err("%s: modulation type not supported!", __func__); - return -EINVAL; - } - ret = mxl1x1sf_tune_rf(fe, c->frequency, bw); - if (mxl_fail(ret)) - goto fail; - - state->frequency = c->frequency; - state->bandwidth = c->bandwidth_hz; -fail: - return ret; -} - -/* ------------------------------------------------------------------------ */ - -#if 0 -static int mxl111sf_tuner_init(struct dvb_frontend *fe) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - int ret; - - /* wake from standby handled by usb driver */ - - return ret; -} - -static int mxl111sf_tuner_sleep(struct dvb_frontend *fe) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - int ret; - - /* enter standby mode handled by usb driver */ - - return ret; -} -#endif - -/* ------------------------------------------------------------------------ */ - -static int mxl111sf_tuner_get_status(struct dvb_frontend *fe, u32 *status) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - int rf_locked, ref_locked, ret; - - *status = 0; - - ret = mxl1x1sf_tuner_get_lock_status(state, &rf_locked, &ref_locked); - if (mxl_fail(ret)) - goto fail; - mxl_info("%s%s", rf_locked ? "rf locked " : "", - ref_locked ? "ref locked" : ""); - - if ((rf_locked) || (ref_locked)) - *status |= TUNER_STATUS_LOCKED; -fail: - return ret; -} - -static int mxl111sf_get_rf_strength(struct dvb_frontend *fe, u16 *strength) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - u8 val1, val2; - int ret; - - *strength = 0; - - ret = mxl111sf_tuner_write_reg(state, 0x00, 0x02); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_LSB_REG, &val1); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_tuner_read_reg(state, V6_DIG_RF_PWR_MSB_REG, &val2); - if (mxl_fail(ret)) - goto fail; - - *strength = val1 | ((val2 & 0x07) << 8); -fail: - ret = mxl111sf_tuner_write_reg(state, 0x00, 0x00); - mxl_fail(ret); - - return ret; -} - -/* ------------------------------------------------------------------------ */ - -static int mxl111sf_tuner_get_frequency(struct dvb_frontend *fe, u32 *frequency) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - *frequency = state->frequency; - return 0; -} - -static int mxl111sf_tuner_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - *bandwidth = state->bandwidth; - return 0; -} - -static int mxl111sf_tuner_get_if_frequency(struct dvb_frontend *fe, - u32 *frequency) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - - *frequency = 0; - - switch (state->if_freq) { - case MXL_IF_4_0: /* 4.0 MHz */ - *frequency = 4000000; - break; - case MXL_IF_4_5: /* 4.5 MHz */ - *frequency = 4500000; - break; - case MXL_IF_4_57: /* 4.57 MHz */ - *frequency = 4570000; - break; - case MXL_IF_5_0: /* 5.0 MHz */ - *frequency = 5000000; - break; - case MXL_IF_5_38: /* 5.38 MHz */ - *frequency = 5380000; - break; - case MXL_IF_6_0: /* 6.0 MHz */ - *frequency = 6000000; - break; - case MXL_IF_6_28: /* 6.28 MHz */ - *frequency = 6280000; - break; - case MXL_IF_7_2: /* 7.2 MHz */ - *frequency = 7200000; - break; - case MXL_IF_35_25: /* 35.25 MHz */ - *frequency = 35250000; - break; - case MXL_IF_36: /* 36 MHz */ - *frequency = 36000000; - break; - case MXL_IF_36_15: /* 36.15 MHz */ - *frequency = 36150000; - break; - case MXL_IF_44: /* 44 MHz */ - *frequency = 44000000; - break; - } - return 0; -} - -static int mxl111sf_tuner_release(struct dvb_frontend *fe) -{ - struct mxl111sf_tuner_state *state = fe->tuner_priv; - mxl_dbg("()"); - kfree(state); - fe->tuner_priv = NULL; - return 0; -} - -/* ------------------------------------------------------------------------- */ - -static struct dvb_tuner_ops mxl111sf_tuner_tuner_ops = { - .info = { - .name = "MaxLinear MxL111SF", -#if 0 - .frequency_min = , - .frequency_max = , - .frequency_step = , -#endif - }, -#if 0 - .init = mxl111sf_tuner_init, - .sleep = mxl111sf_tuner_sleep, -#endif - .set_params = mxl111sf_tuner_set_params, - .get_status = mxl111sf_tuner_get_status, - .get_rf_strength = mxl111sf_get_rf_strength, - .get_frequency = mxl111sf_tuner_get_frequency, - .get_bandwidth = mxl111sf_tuner_get_bandwidth, - .get_if_frequency = mxl111sf_tuner_get_if_frequency, - .release = mxl111sf_tuner_release, -}; - -struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, - struct mxl111sf_state *mxl_state, - struct mxl111sf_tuner_config *cfg) -{ - struct mxl111sf_tuner_state *state = NULL; - - mxl_dbg("()"); - - state = kzalloc(sizeof(struct mxl111sf_tuner_state), GFP_KERNEL); - if (state == NULL) - return NULL; - - state->mxl_state = mxl_state; - state->cfg = cfg; - - memcpy(&fe->ops.tuner_ops, &mxl111sf_tuner_tuner_ops, - sizeof(struct dvb_tuner_ops)); - - fe->tuner_priv = state; - return fe; -} -EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach); - -MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver"); -MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("0.1"); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-tuner.h b/drivers/media/dvb/dvb-usb-v2/mxl111sf-tuner.h deleted file mode 100644 index ff333960b184..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf-tuner.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner - * - * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MXL111SF_TUNER_H__ -#define __MXL111SF_TUNER_H__ - -#include "dvb_frontend.h" - -#include "mxl111sf.h" - -enum mxl_if_freq { -#if 0 - MXL_IF_LO = 0x00, /* other IF < 9MHz */ -#endif - MXL_IF_4_0 = 0x01, /* 4.0 MHz */ - MXL_IF_4_5 = 0x02, /* 4.5 MHz */ - MXL_IF_4_57 = 0x03, /* 4.57 MHz */ - MXL_IF_5_0 = 0x04, /* 5.0 MHz */ - MXL_IF_5_38 = 0x05, /* 5.38 MHz */ - MXL_IF_6_0 = 0x06, /* 6.0 MHz */ - MXL_IF_6_28 = 0x07, /* 6.28 MHz */ - MXL_IF_7_2 = 0x08, /* 7.2 MHz */ - MXL_IF_35_25 = 0x09, /* 35.25 MHz */ - MXL_IF_36 = 0x0a, /* 36 MHz */ - MXL_IF_36_15 = 0x0b, /* 36.15 MHz */ - MXL_IF_44 = 0x0c, /* 44 MHz */ -#if 0 - MXL_IF_HI = 0x0f, /* other IF > 35 MHz and < 45 MHz */ -#endif -}; - -struct mxl111sf_tuner_config { - enum mxl_if_freq if_freq; - unsigned int invert_spectrum:1; - - int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data); - int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data); - int (*program_regs)(struct mxl111sf_state *state, - struct mxl111sf_reg_ctrl_info *ctrl_reg_info); - int (*top_master_ctrl)(struct mxl111sf_state *state, int onoff); - int (*ant_hunt)(struct dvb_frontend *fe); -}; - -/* ------------------------------------------------------------------------ */ - -#if defined(CONFIG_DVB_USB_MXL111SF) || \ - (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE)) -extern -struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, - struct mxl111sf_state *mxl_state, - struct mxl111sf_tuner_config *cfg); -#else -static inline -struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe, - struct mxl111sf_state *mxl_state - struct mxl111sf_tuner_config *cfg) -{ - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; -} -#endif - -#endif /* __MXL111SF_TUNER_H__ */ - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ - diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf.c b/drivers/media/dvb/dvb-usb-v2/mxl111sf.c deleted file mode 100644 index efdcb15358f1..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf.c +++ /dev/null @@ -1,1431 +0,0 @@ -/* - * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ - -#include <linux/vmalloc.h> -#include <linux/i2c.h> - -#include "mxl111sf.h" -#include "mxl111sf-reg.h" -#include "mxl111sf-phy.h" -#include "mxl111sf-i2c.h" -#include "mxl111sf-gpio.h" - -#include "mxl111sf-demod.h" -#include "mxl111sf-tuner.h" - -#include "lgdt3305.h" -#include "lg2160.h" - -int dvb_usb_mxl111sf_debug; -module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level " - "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able))."); - -int dvb_usb_mxl111sf_isoc; -module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644); -MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc)."); - -int dvb_usb_mxl111sf_spi; -module_param_named(spi, dvb_usb_mxl111sf_spi, int, 0644); -MODULE_PARM_DESC(spi, "use spi rather than tp for data xfer (0=tp, 1=spi)."); - -#define ANT_PATH_AUTO 0 -#define ANT_PATH_EXTERNAL 1 -#define ANT_PATH_INTERNAL 2 - -int dvb_usb_mxl111sf_rfswitch = -#if 0 - ANT_PATH_AUTO; -#else - ANT_PATH_EXTERNAL; -#endif - -module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644); -MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int)."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define deb_info pr_debug -#define deb_reg pr_debug -#define deb_adv pr_debug -#define err pr_err -#define info pr_info - -int mxl111sf_ctrl_msg(struct dvb_usb_device *d, - u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - int ret; - u8 sndbuf[1+wlen]; - - deb_adv("%s(wlen = %d, rlen = %d)\n", __func__, wlen, rlen); - - memset(sndbuf, 0, 1+wlen); - - sndbuf[0] = cmd; - memcpy(&sndbuf[1], wbuf, wlen); - - ret = (wo) ? dvb_usbv2_generic_write(d, sndbuf, 1+wlen) : - dvb_usbv2_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen); - mxl_fail(ret); - - return ret; -} - -/* ------------------------------------------------------------------------ */ - -#define MXL_CMD_REG_READ 0xaa -#define MXL_CMD_REG_WRITE 0x55 - -int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data) -{ - u8 buf[2]; - int ret; - - ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_READ, &addr, 1, buf, 2); - if (mxl_fail(ret)) { - mxl_debug("error reading reg: 0x%02x", addr); - goto fail; - } - - if (buf[0] == addr) - *data = buf[1]; - else { - err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x", - addr, buf[0], buf[1]); - ret = -EINVAL; - } - - deb_reg("R: (0x%02x, 0x%02x)\n", addr, *data); -fail: - return ret; -} - -int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data) -{ - u8 buf[] = { addr, data }; - int ret; - - deb_reg("W: (0x%02x, 0x%02x)\n", addr, data); - - ret = mxl111sf_ctrl_msg(state->d, MXL_CMD_REG_WRITE, buf, 2, NULL, 0); - if (mxl_fail(ret)) - err("error writing reg: 0x%02x, val: 0x%02x", addr, data); - return ret; -} - -/* ------------------------------------------------------------------------ */ - -int mxl111sf_write_reg_mask(struct mxl111sf_state *state, - u8 addr, u8 mask, u8 data) -{ - int ret; - u8 val; - - if (mask != 0xff) { - ret = mxl111sf_read_reg(state, addr, &val); -#if 1 - /* dont know why this usually errors out on the first try */ - if (mxl_fail(ret)) - err("error writing addr: 0x%02x, mask: 0x%02x, " - "data: 0x%02x, retrying...", addr, mask, data); - - ret = mxl111sf_read_reg(state, addr, &val); -#endif - if (mxl_fail(ret)) - goto fail; - } - val &= ~mask; - val |= data; - - ret = mxl111sf_write_reg(state, addr, val); - mxl_fail(ret); -fail: - return ret; -} - -/* ------------------------------------------------------------------------ */ - -int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state, - struct mxl111sf_reg_ctrl_info *ctrl_reg_info) -{ - int i, ret = 0; - - for (i = 0; ctrl_reg_info[i].addr | - ctrl_reg_info[i].mask | - ctrl_reg_info[i].data; i++) { - - ret = mxl111sf_write_reg_mask(state, - ctrl_reg_info[i].addr, - ctrl_reg_info[i].mask, - ctrl_reg_info[i].data); - if (mxl_fail(ret)) { - err("failed on reg #%d (0x%02x)", i, - ctrl_reg_info[i].addr); - break; - } - } - return ret; -} - -/* ------------------------------------------------------------------------ */ - -static int mxl1x1sf_get_chip_info(struct mxl111sf_state *state) -{ - int ret; - u8 id, ver; - char *mxl_chip, *mxl_rev; - - if ((state->chip_id) && (state->chip_ver)) - return 0; - - ret = mxl111sf_read_reg(state, CHIP_ID_REG, &id); - if (mxl_fail(ret)) - goto fail; - state->chip_id = id; - - ret = mxl111sf_read_reg(state, TOP_CHIP_REV_ID_REG, &ver); - if (mxl_fail(ret)) - goto fail; - state->chip_ver = ver; - - switch (id) { - case 0x61: - mxl_chip = "MxL101SF"; - break; - case 0x63: - mxl_chip = "MxL111SF"; - break; - default: - mxl_chip = "UNKNOWN MxL1X1"; - break; - } - switch (ver) { - case 0x36: - state->chip_rev = MXL111SF_V6; - mxl_rev = "v6"; - break; - case 0x08: - state->chip_rev = MXL111SF_V8_100; - mxl_rev = "v8_100"; - break; - case 0x18: - state->chip_rev = MXL111SF_V8_200; - mxl_rev = "v8_200"; - break; - default: - state->chip_rev = 0; - mxl_rev = "UNKNOWN REVISION"; - break; - } - info("%s detected, %s (0x%x)", mxl_chip, mxl_rev, ver); -fail: - return ret; -} - -#define get_chip_info(state) \ -({ \ - int ___ret; \ - ___ret = mxl1x1sf_get_chip_info(state); \ - if (mxl_fail(___ret)) { \ - mxl_debug("failed to get chip info" \ - " on first probe attempt"); \ - ___ret = mxl1x1sf_get_chip_info(state); \ - if (mxl_fail(___ret)) \ - err("failed to get chip info during probe"); \ - else \ - mxl_debug("probe needed a retry " \ - "in order to succeed."); \ - } \ - ___ret; \ -}) - -/* ------------------------------------------------------------------------ */ -#if 0 -static int mxl111sf_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - /* power control depends on which adapter is being woken: - * save this for init, instead, via mxl111sf_adap_fe_init */ - return 0; -} -#endif - -static int mxl111sf_adap_fe_init(struct dvb_frontend *fe) -{ - struct dvb_usb_device *d = fe_to_d(fe); - struct mxl111sf_state *state = fe_to_priv(fe); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; - int err; - - /* exit if we didnt initialize the driver yet */ - if (!state->chip_id) { - mxl_debug("driver not yet initialized, exit."); - goto fail; - } - - deb_info("%s()\n", __func__); - - mutex_lock(&state->fe_lock); - - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - err = mxl1x1sf_soft_reset(state); - mxl_fail(err); - err = mxl111sf_init_tuner_demod(state); - mxl_fail(err); - err = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - - mxl_fail(err); - mxl111sf_enable_usb_output(state); - mxl_fail(err); - mxl1x1sf_top_master_ctrl(state, 1); - mxl_fail(err); - - if ((MXL111SF_GPIO_MOD_DVBT != adap_state->gpio_mode) && - (state->chip_rev > MXL111SF_V6)) { - mxl111sf_config_pin_mux_modes(state, - PIN_MUX_TS_SPI_IN_MODE_1); - mxl_fail(err); - } - err = mxl111sf_init_port_expander(state); - if (!mxl_fail(err)) { - state->gpio_mode = adap_state->gpio_mode; - err = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - mxl_fail(err); -#if 0 - err = fe->ops.init(fe); -#endif - msleep(100); /* add short delay after enabling - * the demod before touching it */ - } - - return (adap_state->fe_init) ? adap_state->fe_init(fe) : 0; -fail: - return -ENODEV; -} - -static int mxl111sf_adap_fe_sleep(struct dvb_frontend *fe) -{ - struct mxl111sf_state *state = fe_to_priv(fe); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; - int err; - - /* exit if we didnt initialize the driver yet */ - if (!state->chip_id) { - mxl_debug("driver not yet initialized, exit."); - goto fail; - } - - deb_info("%s()\n", __func__); - - err = (adap_state->fe_sleep) ? adap_state->fe_sleep(fe) : 0; - - mutex_unlock(&state->fe_lock); - - return err; -fail: - return -ENODEV; -} - - -static int mxl111sf_ep6_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct mxl111sf_state *state = fe_to_priv(fe); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe->id]; - int ret = 0; - - deb_info("%s(%d)\n", __func__, onoff); - - if (onoff) { - ret = mxl111sf_enable_usb_output(state); - mxl_fail(ret); - ret = mxl111sf_config_mpeg_in(state, 1, 1, - adap_state->ep6_clockphase, - 0, 0); - mxl_fail(ret); -#if 0 - } else { - ret = mxl111sf_disable_656_port(state); - mxl_fail(ret); -#endif - } - - return ret; -} - -static int mxl111sf_ep5_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct mxl111sf_state *state = fe_to_priv(fe); - int ret = 0; - - deb_info("%s(%d)\n", __func__, onoff); - - if (onoff) { - ret = mxl111sf_enable_usb_output(state); - mxl_fail(ret); - - ret = mxl111sf_init_i2s_port(state, 200); - mxl_fail(ret); - ret = mxl111sf_config_i2s(state, 0, 15); - mxl_fail(ret); - } else { - ret = mxl111sf_disable_i2s_port(state); - mxl_fail(ret); - } - if (state->chip_rev > MXL111SF_V6) - ret = mxl111sf_config_spi(state, onoff); - mxl_fail(ret); - - return ret; -} - -static int mxl111sf_ep4_streaming_ctrl(struct dvb_frontend *fe, int onoff) -{ - struct mxl111sf_state *state = fe_to_priv(fe); - int ret = 0; - - deb_info("%s(%d)\n", __func__, onoff); - - if (onoff) { - ret = mxl111sf_enable_usb_output(state); - mxl_fail(ret); - } - - return ret; -} - -/* ------------------------------------------------------------------------ */ - -static struct lgdt3305_config hauppauge_lgdt3305_config = { - .i2c_addr = 0xb2 >> 1, - .mpeg_mode = LGDT3305_MPEG_SERIAL, - .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, - .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .qam_if_khz = 6000, - .vsb_if_khz = 6000, -}; - -static int mxl111sf_lgdt3305_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct mxl111sf_state *state = d_to_priv(d); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_ATSC; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - adap->fe[fe_id] = dvb_attach(lgdt3305_attach, - &hauppauge_lgdt3305_config, - &d->i2c_adap); - if (adap->fe[fe_id]) { - state->num_frontends++; - adap_state->fe_init = adap->fe[fe_id]->ops.init; - adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; - adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct lg2160_config hauppauge_lg2160_config = { - .lg_chip = LG2160, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, -}; - -static int mxl111sf_lg2160_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct mxl111sf_state *state = d_to_priv(d); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_MH; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - goto fail; - - adap->fe[fe_id] = dvb_attach(lg2160_attach, - &hauppauge_lg2160_config, - &d->i2c_adap); - if (adap->fe[fe_id]) { - state->num_frontends++; - adap_state->fe_init = adap->fe[fe_id]->ops.init; - adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; - adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct lg2160_config hauppauge_lg2161_1019_config = { - .lg_chip = LG2161_1019, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 2, /* LG2161_OIF_SPI_MAS */ -}; - -static struct lg2160_config hauppauge_lg2161_1040_config = { - .lg_chip = LG2161_1040, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 4, /* LG2161_OIF_SPI_MAS */ -}; - -static int mxl111sf_lg2161_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct mxl111sf_state *state = d_to_priv(d); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_MH; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - goto fail; - - adap->fe[fe_id] = dvb_attach(lg2160_attach, - (MXL111SF_V8_200 == state->chip_rev) ? - &hauppauge_lg2161_1040_config : - &hauppauge_lg2161_1019_config, - &d->i2c_adap); - if (adap->fe[fe_id]) { - state->num_frontends++; - adap_state->fe_init = adap->fe[fe_id]->ops.init; - adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; - adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct lg2160_config hauppauge_lg2161_1019_ep6_config = { - .lg_chip = LG2161_1019, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 1, /* LG2161_OIF_SERIAL_TS */ -}; - -static struct lg2160_config hauppauge_lg2161_1040_ep6_config = { - .lg_chip = LG2161_1040, - .i2c_addr = 0x1c >> 1, - .deny_i2c_rptr = 1, - .spectral_inversion = 0, - .if_khz = 6000, - .output_if = 7, /* LG2161_OIF_SERIAL_TS */ -}; - -static int mxl111sf_lg2161_ep6_frontend_attach(struct dvb_usb_adapter *adap, u8 fe_id) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct mxl111sf_state *state = d_to_priv(d); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 2 : 1; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_MH; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_TUNER_MODE; - adap_state->ep6_clockphase = 0; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_init_port_expander(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_gpio_mode_switch(state, state->gpio_mode); - if (mxl_fail(ret)) - goto fail; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - goto fail; - - adap->fe[fe_id] = dvb_attach(lg2160_attach, - (MXL111SF_V8_200 == state->chip_rev) ? - &hauppauge_lg2161_1040_ep6_config : - &hauppauge_lg2161_1019_ep6_config, - &d->i2c_adap); - if (adap->fe[fe_id]) { - state->num_frontends++; - adap_state->fe_init = adap->fe[fe_id]->ops.init; - adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; - adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static struct mxl111sf_demod_config mxl_demod_config = { - .read_reg = mxl111sf_read_reg, - .write_reg = mxl111sf_write_reg, - .program_regs = mxl111sf_ctrl_program_regs, -}; - -static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id) -{ - struct dvb_usb_device *d = adap_to_d(adap); - struct mxl111sf_state *state = d_to_priv(d); - struct mxl111sf_adap_state *adap_state = &state->adap_state[fe_id]; - int ret; - - deb_adv("%s()\n", __func__); - - /* save a pointer to the dvb_usb_device in device state */ - state->d = d; - adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 1 : 2; - state->alt_mode = adap_state->alt_mode; - - if (usb_set_interface(d->udev, 0, state->alt_mode) < 0) - err("set interface failed"); - - state->gpio_mode = MXL111SF_GPIO_MOD_DVBT; - adap_state->gpio_mode = state->gpio_mode; - adap_state->device_mode = MXL_SOC_MODE; - adap_state->ep6_clockphase = 1; - - ret = mxl1x1sf_soft_reset(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl111sf_init_tuner_demod(state); - if (mxl_fail(ret)) - goto fail; - - ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode); - if (mxl_fail(ret)) - goto fail; - - ret = mxl111sf_enable_usb_output(state); - if (mxl_fail(ret)) - goto fail; - ret = mxl1x1sf_top_master_ctrl(state, 1); - if (mxl_fail(ret)) - goto fail; - - /* dont care if this fails */ - mxl111sf_init_port_expander(state); - - adap->fe[fe_id] = dvb_attach(mxl111sf_demod_attach, state, - &mxl_demod_config); - if (adap->fe[fe_id]) { - state->num_frontends++; - adap_state->fe_init = adap->fe[fe_id]->ops.init; - adap->fe[fe_id]->ops.init = mxl111sf_adap_fe_init; - adap_state->fe_sleep = adap->fe[fe_id]->ops.sleep; - adap->fe[fe_id]->ops.sleep = mxl111sf_adap_fe_sleep; - return 0; - } - ret = -EIO; -fail: - return ret; -} - -static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state, - int antpath) -{ - return mxl111sf_idac_config(state, 1, 1, - (antpath == ANT_PATH_INTERNAL) ? - 0x3f : 0x00, 0); -} - -#define DbgAntHunt(x, pwr0, pwr1, pwr2, pwr3) \ - err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \ - __func__, __LINE__, \ - (ANT_PATH_EXTERNAL == x) ? "EXTERNAL" : "INTERNAL", \ - pwr0, pwr1, pwr2, pwr3) - -#define ANT_HUNT_SLEEP 90 -#define ANT_EXT_TWEAK 0 - -static int mxl111sf_ant_hunt(struct dvb_frontend *fe) -{ - struct mxl111sf_state *state = fe_to_priv(fe); - int antctrl = dvb_usb_mxl111sf_rfswitch; - - u16 rxPwrA, rxPwr0, rxPwr1, rxPwr2; - - /* FIXME: must force EXTERNAL for QAM - done elsewhere */ - mxl111sf_set_ant_path(state, antctrl == ANT_PATH_AUTO ? - ANT_PATH_EXTERNAL : antctrl); - - if (antctrl == ANT_PATH_AUTO) { -#if 0 - msleep(ANT_HUNT_SLEEP); -#endif - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwrA); - - mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); - msleep(ANT_HUNT_SLEEP); - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr0); - - mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); - msleep(ANT_HUNT_SLEEP); - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr1); - - mxl111sf_set_ant_path(state, ANT_PATH_INTERNAL); - msleep(ANT_HUNT_SLEEP); - fe->ops.tuner_ops.get_rf_strength(fe, &rxPwr2); - - if (rxPwr1+ANT_EXT_TWEAK >= rxPwr2) { - /* return with EXTERNAL enabled */ - mxl111sf_set_ant_path(state, ANT_PATH_EXTERNAL); - DbgAntHunt(ANT_PATH_EXTERNAL, rxPwrA, - rxPwr0, rxPwr1, rxPwr2); - } else { - /* return with INTERNAL enabled */ - DbgAntHunt(ANT_PATH_INTERNAL, rxPwrA, - rxPwr0, rxPwr1, rxPwr2); - } - } - return 0; -} - -static struct mxl111sf_tuner_config mxl_tuner_config = { - .if_freq = MXL_IF_6_0, /* applies to external IF output, only */ - .invert_spectrum = 0, - .read_reg = mxl111sf_read_reg, - .write_reg = mxl111sf_write_reg, - .program_regs = mxl111sf_ctrl_program_regs, - .top_master_ctrl = mxl1x1sf_top_master_ctrl, - .ant_hunt = mxl111sf_ant_hunt, -}; - -static int mxl111sf_attach_tuner(struct dvb_usb_adapter *adap) -{ - struct mxl111sf_state *state = adap_to_priv(adap); - int i; - - deb_adv("%s()\n", __func__); - - for (i = 0; i < state->num_frontends; i++) { - if (dvb_attach(mxl111sf_tuner_attach, adap->fe[i], state, - &mxl_tuner_config) == NULL) - return -EIO; - adap->fe[i]->ops.read_signal_strength = adap->fe[i]->ops.tuner_ops.get_rf_strength; - } - - return 0; -} - -static u32 mxl111sf_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -struct i2c_algorithm mxl111sf_i2c_algo = { - .master_xfer = mxl111sf_i2c_xfer, - .functionality = mxl111sf_i2c_func, -#ifdef NEED_ALGO_CONTROL - .algo_control = dummy_algo_control, -#endif -}; - -static int mxl111sf_init(struct dvb_usb_device *d) -{ - struct mxl111sf_state *state = d_to_priv(d); - int ret; - static u8 eeprom[256]; - struct i2c_client c; - - ret = get_chip_info(state); - if (mxl_fail(ret)) - err("failed to get chip info during probe"); - - mutex_init(&state->fe_lock); - - if (state->chip_rev > MXL111SF_V6) - mxl111sf_config_pin_mux_modes(state, PIN_MUX_TS_SPI_IN_MODE_1); - - c.adapter = &d->i2c_adap; - c.addr = 0xa0 >> 1; - - ret = tveeprom_read(&c, eeprom, sizeof(eeprom)); - if (mxl_fail(ret)) - return 0; - tveeprom_hauppauge_analog(&c, &state->tv, (0x84 == eeprom[0xa0]) ? - eeprom + 0xa0 : eeprom + 0x80); -#if 0 - switch (state->tv.model) { - case 117001: - case 126001: - case 138001: - break; - default: - printk(KERN_WARNING "%s: warning: " - "unknown hauppauge model #%d\n", - __func__, state->tv.model); - } -#endif - return 0; -} - -static int mxl111sf_frontend_attach_dvbt(struct dvb_usb_adapter *adap) -{ - return mxl111sf_attach_demod(adap, 0); -} - -static int mxl111sf_frontend_attach_atsc(struct dvb_usb_adapter *adap) -{ - return mxl111sf_lgdt3305_frontend_attach(adap, 0); -} - -static int mxl111sf_frontend_attach_mh(struct dvb_usb_adapter *adap) -{ - return mxl111sf_lg2160_frontend_attach(adap, 0); -} - -static int mxl111sf_frontend_attach_atsc_mh(struct dvb_usb_adapter *adap) -{ - int ret; - deb_info("%s\n", __func__); - - ret = mxl111sf_lgdt3305_frontend_attach(adap, 0); - if (ret < 0) - return ret; - - ret = mxl111sf_attach_demod(adap, 1); - if (ret < 0) - return ret; - - ret = mxl111sf_lg2160_frontend_attach(adap, 2); - if (ret < 0) - return ret; - - return ret; -} - -static int mxl111sf_frontend_attach_mercury(struct dvb_usb_adapter *adap) -{ - int ret; - deb_info("%s\n", __func__); - - ret = mxl111sf_lgdt3305_frontend_attach(adap, 0); - if (ret < 0) - return ret; - - ret = mxl111sf_attach_demod(adap, 1); - if (ret < 0) - return ret; - - ret = mxl111sf_lg2161_ep6_frontend_attach(adap, 2); - if (ret < 0) - return ret; - - return ret; -} - -static int mxl111sf_frontend_attach_mercury_mh(struct dvb_usb_adapter *adap) -{ - int ret; - deb_info("%s\n", __func__); - - ret = mxl111sf_attach_demod(adap, 0); - if (ret < 0) - return ret; - - if (dvb_usb_mxl111sf_spi) - ret = mxl111sf_lg2161_frontend_attach(adap, 1); - else - ret = mxl111sf_lg2161_ep6_frontend_attach(adap, 1); - - return ret; -} - -static void mxl111sf_stream_config_bulk(struct usb_data_stream_properties *stream, u8 endpoint) -{ - deb_info("%s: endpoint=%d size=8192\n", __func__, endpoint); - stream->type = USB_BULK; - stream->count = 5; - stream->endpoint = endpoint; - stream->u.bulk.buffersize = 8192; -} - -static void mxl111sf_stream_config_isoc(struct usb_data_stream_properties *stream, - u8 endpoint, int framesperurb, int framesize) -{ - deb_info("%s: endpoint=%d size=%d\n", __func__, endpoint, - framesperurb * framesize); - stream->type = USB_ISOC; - stream->count = 5; - stream->endpoint = endpoint; - stream->u.isoc.framesperurb = framesperurb; - stream->u.isoc.framesize = framesize; - stream->u.isoc.interval = 1; -} - -/* DVB USB Driver stuff */ - -/* dvbt mxl111sf - * bulk EP4/BULK/5/8192 - * isoc EP4/ISOC/5/96/564 - */ -static int mxl111sf_get_stream_config_dvbt(struct dvb_frontend *fe, - u8 *ts_type, struct usb_data_stream_properties *stream) -{ - deb_info("%s: fe=%d\n", __func__, fe->id); - - *ts_type = DVB_USB_FE_TS_TYPE_188; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 4, 96, 564); - else - mxl111sf_stream_config_bulk(stream, 4); - return 0; -} - -static struct dvb_usb_device_properties mxl111sf_props_dvbt = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct mxl111sf_state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .i2c_algo = &mxl111sf_i2c_algo, - .frontend_attach = mxl111sf_frontend_attach_dvbt, - .tuner_attach = mxl111sf_attach_tuner, - .init = mxl111sf_init, - .streaming_ctrl = mxl111sf_ep4_streaming_ctrl, - .get_stream_config = mxl111sf_get_stream_config_dvbt, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), - } - } -}; - -/* atsc lgdt3305 - * bulk EP6/BULK/5/8192 - * isoc EP6/ISOC/5/24/3072 - */ -static int mxl111sf_get_stream_config_atsc(struct dvb_frontend *fe, - u8 *ts_type, struct usb_data_stream_properties *stream) -{ - deb_info("%s: fe=%d\n", __func__, fe->id); - - *ts_type = DVB_USB_FE_TS_TYPE_188; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 6, 24, 3072); - else - mxl111sf_stream_config_bulk(stream, 6); - return 0; -} - -static struct dvb_usb_device_properties mxl111sf_props_atsc = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct mxl111sf_state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .i2c_algo = &mxl111sf_i2c_algo, - .frontend_attach = mxl111sf_frontend_attach_atsc, - .tuner_attach = mxl111sf_attach_tuner, - .init = mxl111sf_init, - .streaming_ctrl = mxl111sf_ep6_streaming_ctrl, - .get_stream_config = mxl111sf_get_stream_config_atsc, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), - } - } -}; - -/* mh lg2160 - * bulk EP5/BULK/5/8192/RAW - * isoc EP5/ISOC/5/96/200/RAW - */ -static int mxl111sf_get_stream_config_mh(struct dvb_frontend *fe, - u8 *ts_type, struct usb_data_stream_properties *stream) -{ - deb_info("%s: fe=%d\n", __func__, fe->id); - - *ts_type = DVB_USB_FE_TS_TYPE_RAW; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 5, 96, 200); - else - mxl111sf_stream_config_bulk(stream, 5); - return 0; -} - -static struct dvb_usb_device_properties mxl111sf_props_mh = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct mxl111sf_state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .i2c_algo = &mxl111sf_i2c_algo, - .frontend_attach = mxl111sf_frontend_attach_mh, - .tuner_attach = mxl111sf_attach_tuner, - .init = mxl111sf_init, - .streaming_ctrl = mxl111sf_ep5_streaming_ctrl, - .get_stream_config = mxl111sf_get_stream_config_mh, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), - } - } -}; - -/* atsc mh lgdt3305 mxl111sf lg2160 - * bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP5/BULK/5/8192/RAW - * isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW - */ -static int mxl111sf_get_stream_config_atsc_mh(struct dvb_frontend *fe, - u8 *ts_type, struct usb_data_stream_properties *stream) -{ - deb_info("%s: fe=%d\n", __func__, fe->id); - - if (fe->id == 0) { - *ts_type = DVB_USB_FE_TS_TYPE_188; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 6, 24, 3072); - else - mxl111sf_stream_config_bulk(stream, 6); - } else if (fe->id == 1) { - *ts_type = DVB_USB_FE_TS_TYPE_188; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 4, 96, 564); - else - mxl111sf_stream_config_bulk(stream, 4); - } else if (fe->id == 2) { - *ts_type = DVB_USB_FE_TS_TYPE_RAW; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 5, 96, 200); - else - mxl111sf_stream_config_bulk(stream, 5); - } - return 0; -} - -static int mxl111sf_streaming_ctrl_atsc_mh(struct dvb_frontend *fe, int onoff) -{ - deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); - - if (fe->id == 0) - return mxl111sf_ep6_streaming_ctrl(fe, onoff); - else if (fe->id == 1) - return mxl111sf_ep4_streaming_ctrl(fe, onoff); - else if (fe->id == 2) - return mxl111sf_ep5_streaming_ctrl(fe, onoff); - return 0; -} - -static struct dvb_usb_device_properties mxl111sf_props_atsc_mh = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct mxl111sf_state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .i2c_algo = &mxl111sf_i2c_algo, - .frontend_attach = mxl111sf_frontend_attach_atsc_mh, - .tuner_attach = mxl111sf_attach_tuner, - .init = mxl111sf_init, - .streaming_ctrl = mxl111sf_streaming_ctrl_atsc_mh, - .get_stream_config = mxl111sf_get_stream_config_atsc_mh, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), - } - } -}; - -/* mercury lgdt3305 mxl111sf lg2161 - * tp bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP6/BULK/5/8192/RAW - * tp isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP6/ISOC/5/24/3072/RAW - * spi bulk EP6/BULK/5/8192 EP4/BULK/5/8192 EP5/BULK/5/8192/RAW - * spi isoc EP6/ISOC/5/24/3072 EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW - */ -static int mxl111sf_get_stream_config_mercury(struct dvb_frontend *fe, - u8 *ts_type, struct usb_data_stream_properties *stream) -{ - deb_info("%s: fe=%d\n", __func__, fe->id); - - if (fe->id == 0) { - *ts_type = DVB_USB_FE_TS_TYPE_188; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 6, 24, 3072); - else - mxl111sf_stream_config_bulk(stream, 6); - } else if (fe->id == 1) { - *ts_type = DVB_USB_FE_TS_TYPE_188; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 4, 96, 564); - else - mxl111sf_stream_config_bulk(stream, 4); - } else if (fe->id == 2 && dvb_usb_mxl111sf_spi) { - *ts_type = DVB_USB_FE_TS_TYPE_RAW; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 5, 96, 200); - else - mxl111sf_stream_config_bulk(stream, 5); - } else if (fe->id == 2 && !dvb_usb_mxl111sf_spi) { - *ts_type = DVB_USB_FE_TS_TYPE_RAW; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 6, 24, 3072); - else - mxl111sf_stream_config_bulk(stream, 6); - } - return 0; -} - -static int mxl111sf_streaming_ctrl_mercury(struct dvb_frontend *fe, int onoff) -{ - deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); - - if (fe->id == 0) - return mxl111sf_ep6_streaming_ctrl(fe, onoff); - else if (fe->id == 1) - return mxl111sf_ep4_streaming_ctrl(fe, onoff); - else if (fe->id == 2 && dvb_usb_mxl111sf_spi) - return mxl111sf_ep5_streaming_ctrl(fe, onoff); - else if (fe->id == 2 && !dvb_usb_mxl111sf_spi) - return mxl111sf_ep6_streaming_ctrl(fe, onoff); - return 0; -} - -static struct dvb_usb_device_properties mxl111sf_props_mercury = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct mxl111sf_state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .i2c_algo = &mxl111sf_i2c_algo, - .frontend_attach = mxl111sf_frontend_attach_mercury, - .tuner_attach = mxl111sf_attach_tuner, - .init = mxl111sf_init, - .streaming_ctrl = mxl111sf_streaming_ctrl_mercury, - .get_stream_config = mxl111sf_get_stream_config_mercury, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), - } - } -}; - -/* mercury mh mxl111sf lg2161 - * tp bulk EP4/BULK/5/8192 EP6/BULK/5/8192/RAW - * tp isoc EP4/ISOC/5/96/564 EP6/ISOC/5/24/3072/RAW - * spi bulk EP4/BULK/5/8192 EP5/BULK/5/8192/RAW - * spi isoc EP4/ISOC/5/96/564 EP5/ISOC/5/96/200/RAW - */ -static int mxl111sf_get_stream_config_mercury_mh(struct dvb_frontend *fe, - u8 *ts_type, struct usb_data_stream_properties *stream) -{ - deb_info("%s: fe=%d\n", __func__, fe->id); - - if (fe->id == 0) { - *ts_type = DVB_USB_FE_TS_TYPE_188; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 4, 96, 564); - else - mxl111sf_stream_config_bulk(stream, 4); - } else if (fe->id == 1 && dvb_usb_mxl111sf_spi) { - *ts_type = DVB_USB_FE_TS_TYPE_RAW; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 5, 96, 200); - else - mxl111sf_stream_config_bulk(stream, 5); - } else if (fe->id == 1 && !dvb_usb_mxl111sf_spi) { - *ts_type = DVB_USB_FE_TS_TYPE_RAW; - if (dvb_usb_mxl111sf_isoc) - mxl111sf_stream_config_isoc(stream, 6, 24, 3072); - else - mxl111sf_stream_config_bulk(stream, 6); - } - return 0; -} - -static int mxl111sf_streaming_ctrl_mercury_mh(struct dvb_frontend *fe, int onoff) -{ - deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); - - if (fe->id == 0) - return mxl111sf_ep4_streaming_ctrl(fe, onoff); - else if (fe->id == 1 && dvb_usb_mxl111sf_spi) - return mxl111sf_ep5_streaming_ctrl(fe, onoff); - else if (fe->id == 1 && !dvb_usb_mxl111sf_spi) - return mxl111sf_ep6_streaming_ctrl(fe, onoff); - return 0; -} - -static struct dvb_usb_device_properties mxl111sf_props_mercury_mh = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct mxl111sf_state), - - .generic_bulk_ctrl_endpoint = 0x02, - .generic_bulk_ctrl_endpoint_response = 0x81, - - .i2c_algo = &mxl111sf_i2c_algo, - .frontend_attach = mxl111sf_frontend_attach_mercury_mh, - .tuner_attach = mxl111sf_attach_tuner, - .init = mxl111sf_init, - .streaming_ctrl = mxl111sf_streaming_ctrl_mercury_mh, - .get_stream_config = mxl111sf_get_stream_config_mercury_mh, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_ISOC(6, 5, 24, 3072, 1), - } - } -}; - -static const struct usb_device_id mxl111sf_id_table[] = { - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc600, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc601, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc602, &mxl111sf_props_mh, "HCW 126xxx", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc603, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc604, &mxl111sf_props_dvbt, "Hauppauge 126xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc609, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60a, &mxl111sf_props_mh, "HCW 126xxx", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60b, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc60c, &mxl111sf_props_dvbt, "Hauppauge 126xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc653, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc65b, &mxl111sf_props_atsc_mh, "Hauppauge 126xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb700, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb701, &mxl111sf_props_atsc, "Hauppauge 126xxx ATSC", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb702, &mxl111sf_props_mh, "HCW 117xxx", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb703, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb704, &mxl111sf_props_dvbt, "Hauppauge 117xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb753, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb763, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb764, &mxl111sf_props_dvbt, "Hauppauge 117xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd853, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd854, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd863, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd864, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d3, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8d4, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e3, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8e4, &mxl111sf_props_dvbt, "Hauppauge 138xxx DVBT", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xd8ff, &mxl111sf_props_mercury, "Hauppauge Mercury", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc612, &mxl111sf_props_mercury_mh, "Hauppauge 126xxx", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc613, &mxl111sf_props_mercury, "Hauppauge WinTV-Aero-M", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61a, &mxl111sf_props_mercury_mh, "Hauppauge 126xxx", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xc61b, &mxl111sf_props_mercury, "Hauppauge WinTV-Aero-M", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb757, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, - { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xb767, &mxl111sf_props_atsc_mh, "Hauppauge 117xxx ATSC+", NULL) }, - { } -}; -MODULE_DEVICE_TABLE(usb, mxl111sf_id_table); - -static struct usb_driver mxl111sf_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = mxl111sf_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(mxl111sf_usb_driver); - -MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>"); -MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf.h b/drivers/media/dvb/dvb-usb-v2/mxl111sf.h deleted file mode 100644 index 9816de86e48c..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/mxl111sf.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ - -#ifndef _DVB_USB_MXL111SF_H_ -#define _DVB_USB_MXL111SF_H_ - -#ifdef DVB_USB_LOG_PREFIX -#undef DVB_USB_LOG_PREFIX -#endif -#define DVB_USB_LOG_PREFIX "mxl111sf" -#include "dvb_usb.h" -#include <media/tveeprom.h> - -#define MXL_EP1_REG_READ 1 -#define MXL_EP2_REG_WRITE 2 -#define MXL_EP3_INTERRUPT 3 -#define MXL_EP4_MPEG2 4 -#define MXL_EP5_I2S 5 -#define MXL_EP6_656 6 -#define MXL_EP6_MPEG2 6 - -#ifdef USING_ENUM_mxl111sf_current_mode -enum mxl111sf_current_mode { - mxl_mode_dvbt = MXL_EP4_MPEG2, - mxl_mode_mh = MXL_EP5_I2S, - mxl_mode_atsc = MXL_EP6_MPEG2, -}; -#endif - -enum mxl111sf_gpio_port_expander { - mxl111sf_gpio_hw, - mxl111sf_PCA9534, -}; - -struct mxl111sf_adap_state { - int alt_mode; - int gpio_mode; - int device_mode; - int ep6_clockphase; - int (*fe_init)(struct dvb_frontend *); - int (*fe_sleep)(struct dvb_frontend *); -}; - -struct mxl111sf_state { - struct dvb_usb_device *d; - - enum mxl111sf_gpio_port_expander gpio_port_expander; - u8 port_expander_addr; - - u8 chip_id; - u8 chip_ver; -#define MXL111SF_V6 1 -#define MXL111SF_V8_100 2 -#define MXL111SF_V8_200 3 - u8 chip_rev; - -#ifdef USING_ENUM_mxl111sf_current_mode - enum mxl111sf_current_mode current_mode; -#endif - -#define MXL_TUNER_MODE 0 -#define MXL_SOC_MODE 1 -#define MXL_DEV_MODE_MASK 0x01 -#if 1 - int device_mode; -#endif - /* use usb alt setting 1 for EP4 ISOC transfer (dvb-t), - EP5 BULK transfer (atsc-mh), - EP6 BULK transfer (atsc/qam), - use usb alt setting 2 for EP4 BULK transfer (dvb-t), - EP5 ISOC transfer (atsc-mh), - EP6 ISOC transfer (atsc/qam), - */ - int alt_mode; - int gpio_mode; - struct tveeprom tv; - - struct mutex fe_lock; - u8 num_frontends; - struct mxl111sf_adap_state adap_state[3]; -}; - -int mxl111sf_read_reg(struct mxl111sf_state *state, u8 addr, u8 *data); -int mxl111sf_write_reg(struct mxl111sf_state *state, u8 addr, u8 data); - -struct mxl111sf_reg_ctrl_info { - u8 addr; - u8 mask; - u8 data; -}; - -int mxl111sf_write_reg_mask(struct mxl111sf_state *state, - u8 addr, u8 mask, u8 data); -int mxl111sf_ctrl_program_regs(struct mxl111sf_state *state, - struct mxl111sf_reg_ctrl_info *ctrl_reg_info); - -/* needed for hardware i2c functions in mxl111sf-i2c.c: - * mxl111sf_i2c_send_data / mxl111sf_i2c_get_data */ -int mxl111sf_ctrl_msg(struct dvb_usb_device *d, - u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen); - -#define mxl_printk(kern, fmt, arg...) \ - printk(kern "%s: " fmt "\n", __func__, ##arg) - -#define mxl_info(fmt, arg...) \ - mxl_printk(KERN_INFO, fmt, ##arg) - -extern int dvb_usb_mxl111sf_debug; -#define mxl_debug(fmt, arg...) \ - if (dvb_usb_mxl111sf_debug) \ - mxl_printk(KERN_DEBUG, fmt, ##arg) - -#define MXL_I2C_DBG 0x04 -#define MXL_ADV_DBG 0x10 -#define mxl_debug_adv(fmt, arg...) \ - if (dvb_usb_mxl111sf_debug & MXL_ADV_DBG) \ - mxl_printk(KERN_DEBUG, fmt, ##arg) - -#define mxl_i2c(fmt, arg...) \ - if (dvb_usb_mxl111sf_debug & MXL_I2C_DBG) \ - mxl_printk(KERN_DEBUG, fmt, ##arg) - -#define mxl_i2c_adv(fmt, arg...) \ - if ((dvb_usb_mxl111sf_debug & (MXL_I2C_DBG | MXL_ADV_DBG)) == \ - (MXL_I2C_DBG | MXL_ADV_DBG)) \ - mxl_printk(KERN_DEBUG, fmt, ##arg) - -/* The following allows the mxl_fail() macro defined below to work - * in externel modules, such as mxl111sf-tuner.ko, even though - * dvb_usb_mxl111sf_debug is not defined within those modules */ -#if (defined(__MXL111SF_TUNER_H__)) || (defined(__MXL111SF_DEMOD_H__)) -#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG -#else -#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug -#endif - -#define mxl_fail(ret) \ -({ \ - int __ret; \ - __ret = (ret < 0); \ - if ((__ret) && (MXL_ADV_DEBUG_ENABLED & MXL_ADV_DBG)) \ - mxl_printk(KERN_ERR, "error %d on line %d", \ - ret, __LINE__); \ - __ret; \ -}) - -#endif /* _DVB_USB_MXL111SF_H_ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/dvb-usb-v2/rtl28xxu.c b/drivers/media/dvb/dvb-usb-v2/rtl28xxu.c deleted file mode 100644 index a2d1e5b9d9d4..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/rtl28xxu.c +++ /dev/null @@ -1,1259 +0,0 @@ -/* - * Realtek RTL28xxU DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> - * Copyright (C) 2012 Thomas Mair <thomas.mair86@googlemail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include "rtl28xxu.h" - -#include "rtl2830.h" -#include "rtl2832.h" - -#include "qt1010.h" -#include "mt2060.h" -#include "mxl5005s.h" -#include "fc0012.h" -#include "fc0013.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) -{ - int ret; - unsigned int pipe; - u8 requesttype; - u8 *buf; - - buf = kmalloc(req->size, GFP_KERNEL); - if (!buf) { - ret = -ENOMEM; - goto err; - } - - if (req->index & CMD_WR_FLAG) { - /* write */ - memcpy(buf, req->data, req->size); - requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); - pipe = usb_sndctrlpipe(d->udev, 0); - } else { - /* read */ - requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); - pipe = usb_rcvctrlpipe(d->udev, 0); - } - - ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value, - req->index, buf, req->size, 1000); - if (ret > 0) - ret = 0; - - deb_dump(0, requesttype, req->value, req->index, buf, req->size); - - /* read request, copy returned data to return buf */ - if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) - memcpy(req->data, buf, req->size); - - kfree(buf); - - if (ret) - goto err; - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) -{ - struct rtl28xxu_req req; - - if (reg < 0x3000) - req.index = CMD_USB_WR; - else if (reg < 0x4000) - req.index = CMD_SYS_WR; - else - req.index = CMD_IR_WR; - - req.value = reg; - req.size = len; - req.data = val; - - return rtl28xxu_ctrl_msg(d, &req); -} - -static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) -{ - struct rtl28xxu_req req; - - if (reg < 0x3000) - req.index = CMD_USB_RD; - else if (reg < 0x4000) - req.index = CMD_SYS_RD; - else - req.index = CMD_IR_RD; - - req.value = reg; - req.size = len; - req.data = val; - - return rtl28xxu_ctrl_msg(d, &req); -} - -static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) -{ - return rtl28xx_wr_regs(d, reg, &val, 1); -} - -static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) -{ - return rtl2831_rd_regs(d, reg, val, 1); -} - -/* I2C */ -static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - int ret; - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct rtl28xxu_priv *priv = d->priv; - struct rtl28xxu_req req; - - /* - * It is not known which are real I2C bus xfer limits, but testing - * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes. - * TODO: find out RTL2832U lens - */ - - /* - * I2C adapter logic looks rather complicated due to fact it handles - * three different access methods. Those methods are; - * 1) integrated demod access - * 2) old I2C access - * 3) new I2C access - * - * Used method is selected in order 1, 2, 3. Method 3 can handle all - * requests but there is two reasons why not use it always; - * 1) It is most expensive, usually two USB messages are needed - * 2) At least RTL2831U does not support it - * - * Method 3 is needed in case of I2C write+read (typical register read) - * where write is more than one byte. - */ - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - if (num == 2 && !(msg[0].flags & I2C_M_RD) && - (msg[1].flags & I2C_M_RD)) { - if (msg[0].len > 24 || msg[1].len > 24) { - /* TODO: check msg[0].len max */ - ret = -EOPNOTSUPP; - goto err_mutex_unlock; - } else if (msg[0].addr == 0x10) { - /* method 1 - integrated demod */ - req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); - req.index = CMD_DEMOD_RD | priv->page; - req.size = msg[1].len; - req.data = &msg[1].buf[0]; - ret = rtl28xxu_ctrl_msg(d, &req); - } else if (msg[0].len < 2) { - /* method 2 - old I2C */ - req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); - req.index = CMD_I2C_RD; - req.size = msg[1].len; - req.data = &msg[1].buf[0]; - ret = rtl28xxu_ctrl_msg(d, &req); - } else { - /* method 3 - new I2C */ - req.value = (msg[0].addr << 1); - req.index = CMD_I2C_DA_WR; - req.size = msg[0].len; - req.data = msg[0].buf; - ret = rtl28xxu_ctrl_msg(d, &req); - if (ret) - goto err_mutex_unlock; - - req.value = (msg[0].addr << 1); - req.index = CMD_I2C_DA_RD; - req.size = msg[1].len; - req.data = msg[1].buf; - ret = rtl28xxu_ctrl_msg(d, &req); - } - } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { - if (msg[0].len > 22) { - /* TODO: check msg[0].len max */ - ret = -EOPNOTSUPP; - goto err_mutex_unlock; - } else if (msg[0].addr == 0x10) { - /* method 1 - integrated demod */ - if (msg[0].buf[0] == 0x00) { - /* save demod page for later demod access */ - priv->page = msg[0].buf[1]; - ret = 0; - } else { - req.value = (msg[0].buf[0] << 8) | - (msg[0].addr << 1); - req.index = CMD_DEMOD_WR | priv->page; - req.size = msg[0].len-1; - req.data = &msg[0].buf[1]; - ret = rtl28xxu_ctrl_msg(d, &req); - } - } else if (msg[0].len < 23) { - /* method 2 - old I2C */ - req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); - req.index = CMD_I2C_WR; - req.size = msg[0].len-1; - req.data = &msg[0].buf[1]; - ret = rtl28xxu_ctrl_msg(d, &req); - } else { - /* method 3 - new I2C */ - req.value = (msg[0].addr << 1); - req.index = CMD_I2C_DA_WR; - req.size = msg[0].len; - req.data = msg[0].buf; - ret = rtl28xxu_ctrl_msg(d, &req); - } - } else { - ret = -EINVAL; - } - -err_mutex_unlock: - mutex_unlock(&d->i2c_mutex); - - return ret ? ret : num; -} - -static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm rtl28xxu_i2c_algo = { - .master_xfer = rtl28xxu_i2c_xfer, - .functionality = rtl28xxu_i2c_func, -}; - -static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, - .spec_inv = 1, - .if_dvbt = 36150000, - .vtop = 0x20, - .krf = 0x04, - .agc_targ_val = 0x2d, - -}; - -static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, - .spec_inv = 1, - .if_dvbt = 36125000, - .vtop = 0x20, - .krf = 0x04, - .agc_targ_val = 0x2d, -}; - -static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .ts_mode = 0, - .spec_inv = 0, - .if_dvbt = 4570000, - .vtop = 0x3f, - .krf = 0x04, - .agc_targ_val = 0x3e, -}; - -static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) -{ - int ret; - struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); - u8 buf[1]; - struct rtl2830_config *rtl2830_config; - /* open RTL2831U/RTL2830 I2C gate */ - struct rtl28xxu_req req_gate = { 0x0120, 0x0011, 0x0001, "\x08" }; - /* for MT2060 tuner probe */ - struct rtl28xxu_req req_mt2060 = { 0x00c0, CMD_I2C_RD, 1, buf }; - /* for QT1010 tuner probe */ - struct rtl28xxu_req req_qt1010 = { 0x0fc4, CMD_I2C_RD, 1, buf }; - - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - /* - * RTL2831U GPIOs - * ========================================================= - * GPIO0 | tuner#0 | 0 off | 1 on | MXL5005S (?) - * GPIO2 | LED | 0 off | 1 on | - * GPIO4 | tuner#1 | 0 on | 1 off | MT2060 - */ - - /* GPIO direction */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a); - if (ret) - goto err; - - /* enable as output GPIO0, GPIO2, GPIO4 */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); - if (ret) - goto err; - - /* - * Probe used tuner. We need to know used tuner before demod attach - * since there is some demod params needed to set according to tuner. - */ - - /* demod needs some time to wake up */ - msleep(20); - - /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(d, &req_gate); - if (ret) - goto err; - - /* check QT1010 ID(?) register; reg=0f val=2c */ - ret = rtl28xxu_ctrl_msg(d, &req_qt1010); - if (ret == 0 && buf[0] == 0x2c) { - priv->tuner = TUNER_RTL2830_QT1010; - rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; - dev_dbg(&d->udev->dev, "%s: QT1010\n", __func__); - goto found; - } else { - dev_dbg(&d->udev->dev, "%s: QT1010 probe failed=%d - %02x\n", - __func__, ret, buf[0]); - } - - /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(d, &req_gate); - if (ret) - goto err; - - /* check MT2060 ID register; reg=00 val=63 */ - ret = rtl28xxu_ctrl_msg(d, &req_mt2060); - if (ret == 0 && buf[0] == 0x63) { - priv->tuner = TUNER_RTL2830_MT2060; - rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; - dev_dbg(&d->udev->dev, "%s: MT2060\n", __func__); - goto found; - } else { - dev_dbg(&d->udev->dev, "%s: MT2060 probe failed=%d - %02x\n", - __func__, ret, buf[0]); - } - - /* assume MXL5005S */ - ret = 0; - priv->tuner = TUNER_RTL2830_MXL5005S; - rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; - dev_dbg(&d->udev->dev, "%s: MXL5005S\n", __func__); - goto found; - -found: - /* attach demodulator */ - adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, - &d->i2c_adap); - if (adap->fe[0] == NULL) { - ret = -ENODEV; - goto err; - } - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .if_dvbt = 0, - .tuner = TUNER_RTL2832_FC0012 -}; - -static struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = { - .i2c_addr = 0x10, /* 0x20 */ - .xtal = 28800000, - .if_dvbt = 0, - .tuner = TUNER_RTL2832_FC0013 -}; - -static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, - int cmd, int arg) -{ - int ret; - u8 val; - - dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); - - switch (cmd) { - case FC_FE_CALLBACK_VHF_ENABLE: - /* set output values */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val); - if (ret) - goto err; - - if (arg) - val &= 0xbf; /* set GPIO6 low */ - else - val |= 0x40; /* set GPIO6 high */ - - - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val); - if (ret) - goto err; - break; - default: - ret = -EINVAL; - goto err; - } - return 0; - -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - - -static int rtl2832u_fc0013_tuner_callback(struct dvb_usb_device *d, - int cmd, int arg) -{ - /* TODO implement*/ - return 0; -} - -static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) -{ - struct rtl28xxu_priv *priv = d->priv; - - switch (priv->tuner) { - case TUNER_RTL2832_FC0012: - return rtl2832u_fc0012_tuner_callback(d, cmd, arg); - - case TUNER_RTL2832_FC0013: - return rtl2832u_fc0013_tuner_callback(d, cmd, arg); - default: - break; - } - - return -ENODEV; -} - -static int rtl2832u_frontend_callback(void *adapter_priv, int component, - int cmd, int arg) -{ - struct i2c_adapter *adap = adapter_priv; - struct dvb_usb_device *d = i2c_get_adapdata(adap); - - switch (component) { - case DVB_FRONTEND_COMPONENT_TUNER: - return rtl2832u_tuner_callback(d, cmd, arg); - default: - break; - } - - return -EINVAL; -} - -static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) -{ - int ret; - struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); - struct rtl2832_config *rtl2832_config; - u8 buf[2], val; - /* open RTL2832U/RTL2832 I2C gate */ - struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; - /* close RTL2832U/RTL2832 I2C gate */ - struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"}; - /* for FC0012 tuner probe */ - struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf}; - /* for FC0013 tuner probe */ - struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf}; - /* for MT2266 tuner probe */ - struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf}; - /* for FC2580 tuner probe */ - struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf}; - /* for MT2063 tuner probe */ - struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf}; - /* for MAX3543 tuner probe */ - struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf}; - /* for TUA9001 tuner probe */ - struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf}; - /* for MXL5007T tuner probe */ - struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf}; - /* for E4000 tuner probe */ - struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf}; - /* for TDA18272 tuner probe */ - struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; - - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val); - if (ret) - goto err; - - val &= 0xbf; - - ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val); - if (ret) - goto err; - - /* enable as output GPIO3 and GPIO6*/ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val); - if (ret) - goto err; - - val |= 0x48; - - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val); - if (ret) - goto err; - - /* - * Probe used tuner. We need to know used tuner before demod attach - * since there is some demod params needed to set according to tuner. - */ - - /* open demod I2C gate */ - ret = rtl28xxu_ctrl_msg(d, &req_gate_open); - if (ret) - goto err; - - priv->tuner = TUNER_NONE; - - /* check FC0012 ID register; reg=00 val=a1 */ - ret = rtl28xxu_ctrl_msg(d, &req_fc0012); - if (ret == 0 && buf[0] == 0xa1) { - priv->tuner = TUNER_RTL2832_FC0012; - rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; - dev_info(&d->udev->dev, "%s: FC0012 tuner found", - KBUILD_MODNAME); - goto found; - } - - /* check FC0013 ID register; reg=00 val=a3 */ - ret = rtl28xxu_ctrl_msg(d, &req_fc0013); - if (ret == 0 && buf[0] == 0xa3) { - priv->tuner = TUNER_RTL2832_FC0013; - rtl2832_config = &rtl28xxu_rtl2832_fc0013_config; - dev_info(&d->udev->dev, "%s: FC0013 tuner found", - KBUILD_MODNAME); - goto found; - } - - /* check MT2266 ID register; reg=00 val=85 */ - ret = rtl28xxu_ctrl_msg(d, &req_mt2266); - if (ret == 0 && buf[0] == 0x85) { - priv->tuner = TUNER_RTL2832_MT2266; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: MT2266 tuner found", - KBUILD_MODNAME); - goto unsupported; - } - - /* check FC2580 ID register; reg=01 val=56 */ - ret = rtl28xxu_ctrl_msg(d, &req_fc2580); - if (ret == 0 && buf[0] == 0x56) { - priv->tuner = TUNER_RTL2832_FC2580; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: FC2580 tuner found", - KBUILD_MODNAME); - goto unsupported; - } - - /* check MT2063 ID register; reg=00 val=9e || 9c */ - ret = rtl28xxu_ctrl_msg(d, &req_mt2063); - if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) { - priv->tuner = TUNER_RTL2832_MT2063; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: MT2063 tuner found", - KBUILD_MODNAME); - goto unsupported; - } - - /* check MAX3543 ID register; reg=00 val=38 */ - ret = rtl28xxu_ctrl_msg(d, &req_max3543); - if (ret == 0 && buf[0] == 0x38) { - priv->tuner = TUNER_RTL2832_MAX3543; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: MAX3534 tuner found", - KBUILD_MODNAME); - goto unsupported; - } - - /* check TUA9001 ID register; reg=7e val=2328 */ - ret = rtl28xxu_ctrl_msg(d, &req_tua9001); - if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) { - priv->tuner = TUNER_RTL2832_TUA9001; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: TUA9001 tuner found", - KBUILD_MODNAME); - goto unsupported; - } - - /* check MXL5007R ID register; reg=d9 val=14 */ - ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t); - if (ret == 0 && buf[0] == 0x14) { - priv->tuner = TUNER_RTL2832_MXL5007T; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: MXL5007T tuner found", - KBUILD_MODNAME); - goto unsupported; - } - - /* check E4000 ID register; reg=02 val=40 */ - ret = rtl28xxu_ctrl_msg(d, &req_e4000); - if (ret == 0 && buf[0] == 0x40) { - priv->tuner = TUNER_RTL2832_E4000; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: E4000 tuner found", - KBUILD_MODNAME); - goto unsupported; - } - - /* check TDA18272 ID register; reg=00 val=c760 */ - ret = rtl28xxu_ctrl_msg(d, &req_tda18272); - if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) { - priv->tuner = TUNER_RTL2832_TDA18272; - /* TODO implement tuner */ - dev_info(&d->udev->dev, "%s: TDA18272 tuner found", - KBUILD_MODNAME); - goto unsupported; - } - -unsupported: - /* close demod I2C gate */ - ret = rtl28xxu_ctrl_msg(d, &req_gate_close); - if (ret) - goto err; - - /* tuner not found */ - dev_dbg(&d->udev->dev, "%s: No compatible tuner found\n", __func__); - ret = -ENODEV; - return ret; - -found: - /* close demod I2C gate */ - ret = rtl28xxu_ctrl_msg(d, &req_gate_close); - if (ret) - goto err; - - /* attach demodulator */ - adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, - &d->i2c_adap); - if (adap->fe[0] == NULL) { - ret = -ENODEV; - goto err; - } - - /* set fe callbacks */ - adap->fe[0]->callback = rtl2832u_frontend_callback; - - return ret; - -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static struct qt1010_config rtl28xxu_qt1010_config = { - .i2c_address = 0x62, /* 0xc4 */ -}; - -static struct mt2060_config rtl28xxu_mt2060_config = { - .i2c_address = 0x60, /* 0xc0 */ - .clock_out = 0, -}; - -static struct mxl5005s_config rtl28xxu_mxl5005s_config = { - .i2c_address = 0x63, /* 0xc6 */ - .if_freq = IF_FREQ_4570000HZ, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_C_H, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) -{ - int ret; - struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); - struct i2c_adapter *rtl2830_tuner_i2c; - struct dvb_frontend *fe; - - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ - rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]); - - switch (priv->tuner) { - case TUNER_RTL2830_QT1010: - fe = dvb_attach(qt1010_attach, adap->fe[0], - rtl2830_tuner_i2c, &rtl28xxu_qt1010_config); - break; - case TUNER_RTL2830_MT2060: - fe = dvb_attach(mt2060_attach, adap->fe[0], - rtl2830_tuner_i2c, &rtl28xxu_mt2060_config, - 1220); - break; - case TUNER_RTL2830_MXL5005S: - fe = dvb_attach(mxl5005s_attach, adap->fe[0], - rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config); - break; - default: - fe = NULL; - dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, - priv->tuner); - } - - if (fe == NULL) { - ret = -ENODEV; - goto err; - } - - return 0; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) -{ - int ret; - struct dvb_usb_device *d = adap_to_d(adap); - struct rtl28xxu_priv *priv = d_to_priv(d); - struct dvb_frontend *fe; - - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - switch (priv->tuner) { - case TUNER_RTL2832_FC0012: - fe = dvb_attach(fc0012_attach, adap->fe[0], - &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); - - /* since fc0012 includs reading the signal strength delegate - * that to the tuner driver */ - adap->fe[0]->ops.read_signal_strength = - adap->fe[0]->ops.tuner_ops.get_rf_strength; - return 0; - break; - case TUNER_RTL2832_FC0013: - fe = dvb_attach(fc0013_attach, adap->fe[0], - &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); - - /* fc0013 also supports signal strength reading */ - adap->fe[0]->ops.read_signal_strength = - adap->fe[0]->ops.tuner_ops.get_rf_strength; - return 0; - default: - fe = NULL; - dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, - priv->tuner); - } - - if (fe == NULL) { - ret = -ENODEV; - goto err; - } - - return 0; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl28xxu_init(struct dvb_usb_device *d) -{ - int ret; - u8 val; - - dev_dbg(&d->udev->dev, "%s:\n", __func__); - - /* init USB endpoints */ - ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); - if (ret) - goto err; - - /* enable DMA and Full Packet Mode*/ - val |= 0x09; - ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); - if (ret) - goto err; - - /* set EPA maximum packet size to 0x0200 */ - ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); - if (ret) - goto err; - - /* change EPA FIFO length */ - ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); - if (ret) - goto err; - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl28xxu_streaming_ctrl(struct dvb_frontend *fe , int onoff) -{ - int ret; - u8 buf[2]; - struct dvb_usb_device *d = fe_to_d(fe); - - dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); - - if (onoff) { - buf[0] = 0x00; - buf[1] = 0x00; - } else { - buf[0] = 0x10; /* stall EPA */ - buf[1] = 0x02; /* reset EPA */ - } - - ret = rtl28xx_wr_regs(d, USB_EPA_CTL, buf, 2); - if (ret) - goto err; - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - int ret; - u8 gpio, sys0; - - dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); - - /* demod adc */ - ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0); - if (ret) - goto err; - - /* tuner power, read GPIOs */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); - if (ret) - goto err; - - dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, - sys0, gpio); - - if (onoff) { - gpio |= 0x01; /* GPIO0 = 1 */ - gpio &= (~0x10); /* GPIO4 = 0 */ - gpio |= 0x04; /* GPIO2 = 1, LED on */ - sys0 = sys0 & 0x0f; - sys0 |= 0xe0; - } else { - gpio &= (~0x01); /* GPIO0 = 0 */ - gpio |= 0x10; /* GPIO4 = 1 */ - gpio &= (~0x04); /* GPIO2 = 1, LED off */ - sys0 = sys0 & (~0xc0); - } - - dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, - sys0, gpio); - - /* demod adc */ - ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0); - if (ret) - goto err; - - /* tuner power, write GPIOs */ - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); - if (ret) - goto err; - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - int ret; - u8 val; - - dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); - - if (onoff) { - /* set output values */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val); - if (ret) - goto err; - - val |= 0x08; - val &= 0xef; - - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val); - if (ret) - goto err; - - /* demod_ctl_1 */ - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val); - if (ret) - goto err; - - val &= 0xef; - - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val); - if (ret) - goto err; - - /* demod control */ - /* PLL enable */ - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val); - if (ret) - goto err; - - /* bit 7 to 1 */ - val |= 0x80; - - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val); - if (ret) - goto err; - - /* demod HW reset */ - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val); - if (ret) - goto err; - /* bit 5 to 0 */ - val &= 0xdf; - - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val); - if (ret) - goto err; - - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val); - if (ret) - goto err; - - val |= 0x20; - - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val); - if (ret) - goto err; - - mdelay(5); - - /*enable ADC_Q and ADC_I */ - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val); - if (ret) - goto err; - - val |= 0x48; - - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val); - if (ret) - goto err; - - - } else { - /* demod_ctl_1 */ - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val); - if (ret) - goto err; - - val |= 0x0c; - - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val); - if (ret) - goto err; - - /* set output values */ - ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val); - if (ret) - goto err; - - val |= 0x10; - - ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val); - if (ret) - goto err; - - /* demod control */ - ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val); - if (ret) - goto err; - - val &= 0x37; - - ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val); - if (ret) - goto err; - - } - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - - -static int rtl2831u_rc_query(struct dvb_usb_device *d) -{ - int ret, i; - struct rtl28xxu_priv *priv = d->priv; - u8 buf[5]; - u32 rc_code; - struct rtl28xxu_reg_val rc_nec_tab[] = { - { 0x3033, 0x80 }, - { 0x3020, 0x43 }, - { 0x3021, 0x16 }, - { 0x3022, 0x16 }, - { 0x3023, 0x5a }, - { 0x3024, 0x2d }, - { 0x3025, 0x16 }, - { 0x3026, 0x01 }, - { 0x3028, 0xb0 }, - { 0x3029, 0x04 }, - { 0x302c, 0x88 }, - { 0x302e, 0x13 }, - { 0x3030, 0xdf }, - { 0x3031, 0x05 }, - }; - - /* init remote controller */ - if (!priv->rc_active) { - for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { - ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg, - rc_nec_tab[i].val); - if (ret) - goto err; - } - priv->rc_active = true; - } - - ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); - if (ret) - goto err; - - if (buf[4] & 0x01) { - if (buf[2] == (u8) ~buf[3]) { - if (buf[0] == (u8) ~buf[1]) { - /* NEC standard (16 bit) */ - rc_code = buf[0] << 8 | buf[2]; - } else { - /* NEC extended (24 bit) */ - rc_code = buf[0] << 16 | - buf[1] << 8 | buf[2]; - } - } else { - /* NEC full (32 bit) */ - rc_code = buf[0] << 24 | buf[1] << 16 | - buf[2] << 8 | buf[3]; - } - - rc_keydown(d->rc_dev, rc_code, 0); - - ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); - if (ret) - goto err; - - /* repeated intentionally to avoid extra keypress */ - ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); - if (ret) - goto err; - } - - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl2831u_get_rc_config(struct dvb_usb_device *d, - struct dvb_usb_rc *rc) -{ - rc->map_name = RC_MAP_EMPTY; - rc->allowed_protos = RC_TYPE_NEC; - rc->query = rtl2831u_rc_query; - rc->interval = 400; - - return 0; -} - -static int rtl2832u_rc_query(struct dvb_usb_device *d) -{ - int ret, i; - struct rtl28xxu_priv *priv = d->priv; - u8 buf[128]; - int len; - struct rtl28xxu_reg_val rc_nec_tab[] = { - { IR_RX_CTRL, 0x20 }, - { IR_RX_BUF_CTRL, 0x80 }, - { IR_RX_IF, 0xff }, - { IR_RX_IE, 0xff }, - { IR_MAX_DURATION0, 0xd0 }, - { IR_MAX_DURATION1, 0x07 }, - { IR_IDLE_LEN0, 0xc0 }, - { IR_IDLE_LEN1, 0x00 }, - { IR_GLITCH_LEN, 0x03 }, - { IR_RX_CLK, 0x09 }, - { IR_RX_CFG, 0x1c }, - { IR_MAX_H_TOL_LEN, 0x1e }, - { IR_MAX_L_TOL_LEN, 0x1e }, - { IR_RX_CTRL, 0x80 }, - }; - - /* init remote controller */ - if (!priv->rc_active) { - for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { - ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg, - rc_nec_tab[i].val); - if (ret) - goto err; - } - priv->rc_active = true; - } - - ret = rtl28xx_rd_reg(d, IR_RX_IF, &buf[0]); - if (ret) - goto err; - - if (buf[0] != 0x83) - goto exit; - - ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]); - if (ret) - goto err; - - len = buf[0]; - ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); - - /* TODO: pass raw IR to Kernel IR decoder */ - - ret = rtl28xx_wr_reg(d, IR_RX_IF, 0x03); - ret = rtl28xx_wr_reg(d, IR_RX_BUF_CTRL, 0x80); - ret = rtl28xx_wr_reg(d, IR_RX_CTRL, 0x80); - -exit: - return ret; -err: - dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); - return ret; -} - -static int rtl2832u_get_rc_config(struct dvb_usb_device *d, - struct dvb_usb_rc *rc) -{ - rc->map_name = RC_MAP_EMPTY; - rc->allowed_protos = RC_TYPE_NEC; - rc->query = rtl2832u_rc_query; - rc->interval = 400; - - return 0; -} - -static const struct dvb_usb_device_properties rtl2831u_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct rtl28xxu_priv), - - .power_ctrl = rtl2831u_power_ctrl, - .i2c_algo = &rtl28xxu_i2c_algo, - .frontend_attach = rtl2831u_frontend_attach, - .tuner_attach = rtl2831u_tuner_attach, - .init = rtl28xxu_init, - .get_rc_config = rtl2831u_get_rc_config, - .streaming_ctrl = rtl28xxu_streaming_ctrl, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), - }, - }, -}; - -static const struct dvb_usb_device_properties rtl2832u_props = { - .driver_name = KBUILD_MODNAME, - .owner = THIS_MODULE, - .adapter_nr = adapter_nr, - .size_of_priv = sizeof(struct rtl28xxu_priv), - - .power_ctrl = rtl2832u_power_ctrl, - .i2c_algo = &rtl28xxu_i2c_algo, - .frontend_attach = rtl2832u_frontend_attach, - .tuner_attach = rtl2832u_tuner_attach, - .init = rtl28xxu_init, - .get_rc_config = rtl2832u_get_rc_config, - .streaming_ctrl = rtl28xxu_streaming_ctrl, - - .num_adapters = 1, - .adapter = { - { - .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), - }, - }, -}; - -static const struct usb_device_id rtl28xxu_id_table[] = { - { DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U, - &rtl2831u_props, "Realtek RTL2831U reference design", NULL) }, - { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT, - &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, - { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2, - &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, - - { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1, - &rtl2832u_props, "Terratec Cinergy T Stick Black", NULL) }, - { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT, - &rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) }, - { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK, - &rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) }, - { } -}; -MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); - -static struct usb_driver rtl28xxu_usb_driver = { - .name = KBUILD_MODNAME, - .id_table = rtl28xxu_id_table, - .probe = dvb_usbv2_probe, - .disconnect = dvb_usbv2_disconnect, - .suspend = dvb_usbv2_suspend, - .resume = dvb_usbv2_resume, - .no_dynamic_id = 1, - .soft_unbind = 1, -}; - -module_usb_driver(rtl28xxu_usb_driver); - -MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver"); -MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_AUTHOR("Thomas Mair <thomas.mair86@googlemail.com>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb-v2/rtl28xxu.h b/drivers/media/dvb/dvb-usb-v2/rtl28xxu.h deleted file mode 100644 index 575edbf13a92..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/rtl28xxu.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Realtek RTL28xxU DVB USB driver - * - * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> - * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef RTL28XXU_H -#define RTL28XXU_H - -#include "dvb_usb.h" - -#define deb_dump(r, t, v, i, b, l) { \ - char *direction; \ - if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ - direction = ">>>"; \ - else \ - direction = "<<<"; \ - dev_dbg(&d->udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \ - "%s [%d bytes]\n", __func__, t, r, v & 0xff, v >> 8, \ - i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l); \ -} - -/* - * USB commands - * (usb_control_msg() index parameter) - */ - -#define DEMOD 0x0000 -#define USB 0x0100 -#define SYS 0x0200 -#define I2C 0x0300 -#define I2C_DA 0x0600 - -#define CMD_WR_FLAG 0x0010 -#define CMD_DEMOD_RD 0x0000 -#define CMD_DEMOD_WR 0x0010 -#define CMD_USB_RD 0x0100 -#define CMD_USB_WR 0x0110 -#define CMD_SYS_RD 0x0200 -#define CMD_IR_RD 0x0201 -#define CMD_IR_WR 0x0211 -#define CMD_SYS_WR 0x0210 -#define CMD_I2C_RD 0x0300 -#define CMD_I2C_WR 0x0310 -#define CMD_I2C_DA_RD 0x0600 -#define CMD_I2C_DA_WR 0x0610 - - -struct rtl28xxu_priv { - u8 chip_id; - u8 tuner; - u8 page; /* integrated demod active register page */ - bool rc_active; -}; - -enum rtl28xxu_chip_id { - CHIP_ID_NONE, - CHIP_ID_RTL2831U, - CHIP_ID_RTL2832U, -}; - -enum rtl28xxu_tuner { - TUNER_NONE, - - TUNER_RTL2830_QT1010, - TUNER_RTL2830_MT2060, - TUNER_RTL2830_MXL5005S, - - TUNER_RTL2832_MT2266, - TUNER_RTL2832_FC2580, - TUNER_RTL2832_MT2063, - TUNER_RTL2832_MAX3543, - TUNER_RTL2832_TUA9001, - TUNER_RTL2832_MXL5007T, - TUNER_RTL2832_FC0012, - TUNER_RTL2832_E4000, - TUNER_RTL2832_TDA18272, - TUNER_RTL2832_FC0013, -}; - -struct rtl28xxu_req { - u16 value; - u16 index; - u16 size; - u8 *data; -}; - -struct rtl28xxu_reg_val { - u16 reg; - u8 val; -}; - -/* - * memory map - * - * 0x0000 DEMOD : demodulator - * 0x2000 USB : SIE, USB endpoint, debug, DMA - * 0x3000 SYS : system - * 0xfc00 RC : remote controller (not RTL2831U) - */ - -/* - * USB registers - */ -/* SIE Control Registers */ -#define USB_SYSCTL 0x2000 /* USB system control */ -#define USB_SYSCTL_0 0x2000 /* USB system control */ -#define USB_SYSCTL_1 0x2001 /* USB system control */ -#define USB_SYSCTL_2 0x2002 /* USB system control */ -#define USB_SYSCTL_3 0x2003 /* USB system control */ -#define USB_IRQSTAT 0x2008 /* SIE interrupt status */ -#define USB_IRQEN 0x200C /* SIE interrupt enable */ -#define USB_CTRL 0x2010 /* USB control */ -#define USB_STAT 0x2014 /* USB status */ -#define USB_DEVADDR 0x2018 /* USB device address */ -#define USB_TEST 0x201C /* USB test mode */ -#define USB_FRAME_NUMBER 0x2020 /* frame number */ -#define USB_FIFO_ADDR 0x2028 /* address of SIE FIFO RAM */ -#define USB_FIFO_CMD 0x202A /* SIE FIFO RAM access command */ -#define USB_FIFO_DATA 0x2030 /* SIE FIFO RAM data */ -/* Endpoint Registers */ -#define EP0_SETUPA 0x20F8 /* EP 0 setup packet lower byte */ -#define EP0_SETUPB 0x20FC /* EP 0 setup packet higher byte */ -#define USB_EP0_CFG 0x2104 /* EP 0 configure */ -#define USB_EP0_CTL 0x2108 /* EP 0 control */ -#define USB_EP0_STAT 0x210C /* EP 0 status */ -#define USB_EP0_IRQSTAT 0x2110 /* EP 0 interrupt status */ -#define USB_EP0_IRQEN 0x2114 /* EP 0 interrupt enable */ -#define USB_EP0_MAXPKT 0x2118 /* EP 0 max packet size */ -#define USB_EP0_BC 0x2120 /* EP 0 FIFO byte counter */ -#define USB_EPA_CFG 0x2144 /* EP A configure */ -#define USB_EPA_CFG_0 0x2144 /* EP A configure */ -#define USB_EPA_CFG_1 0x2145 /* EP A configure */ -#define USB_EPA_CFG_2 0x2146 /* EP A configure */ -#define USB_EPA_CFG_3 0x2147 /* EP A configure */ -#define USB_EPA_CTL 0x2148 /* EP A control */ -#define USB_EPA_CTL_0 0x2148 /* EP A control */ -#define USB_EPA_CTL_1 0x2149 /* EP A control */ -#define USB_EPA_CTL_2 0x214A /* EP A control */ -#define USB_EPA_CTL_3 0x214B /* EP A control */ -#define USB_EPA_STAT 0x214C /* EP A status */ -#define USB_EPA_IRQSTAT 0x2150 /* EP A interrupt status */ -#define USB_EPA_IRQEN 0x2154 /* EP A interrupt enable */ -#define USB_EPA_MAXPKT 0x2158 /* EP A max packet size */ -#define USB_EPA_MAXPKT_0 0x2158 /* EP A max packet size */ -#define USB_EPA_MAXPKT_1 0x2159 /* EP A max packet size */ -#define USB_EPA_MAXPKT_2 0x215A /* EP A max packet size */ -#define USB_EPA_MAXPKT_3 0x215B /* EP A max packet size */ -#define USB_EPA_FIFO_CFG 0x2160 /* EP A FIFO configure */ -#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */ -#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */ -#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */ -#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */ -/* Debug Registers */ -#define USB_PHYTSTDIS 0x2F04 /* PHY test disable */ -#define USB_TOUT_VAL 0x2F08 /* USB time-out time */ -#define USB_VDRCTRL 0x2F10 /* UTMI vendor signal control */ -#define USB_VSTAIN 0x2F14 /* UTMI vendor signal status in */ -#define USB_VLOADM 0x2F18 /* UTMI load vendor signal status in */ -#define USB_VSTAOUT 0x2F1C /* UTMI vendor signal status out */ -#define USB_UTMI_TST 0x2F80 /* UTMI test */ -#define USB_UTMI_STATUS 0x2F84 /* UTMI status */ -#define USB_TSTCTL 0x2F88 /* test control */ -#define USB_TSTCTL2 0x2F8C /* test control 2 */ -#define USB_PID_FORCE 0x2F90 /* force PID */ -#define USB_PKTERR_CNT 0x2F94 /* packet error counter */ -#define USB_RXERR_CNT 0x2F98 /* RX error counter */ -#define USB_MEM_BIST 0x2F9C /* MEM BIST test */ -#define USB_SLBBIST 0x2FA0 /* self-loop-back BIST */ -#define USB_CNTTEST 0x2FA4 /* counter test */ -#define USB_PHYTST 0x2FC0 /* USB PHY test */ -#define USB_DBGIDX 0x2FF0 /* select individual block debug signal */ -#define USB_DBGMUX 0x2FF4 /* debug signal module mux */ - -/* - * SYS registers - */ -/* demod control registers */ -#define SYS_SYS0 0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */ -#define SYS_DEMOD_CTL 0x3000 /* control register for DVB-T demodulator */ -/* GPIO registers */ -#define SYS_GPIO_OUT_VAL 0x3001 /* output value of GPIO */ -#define SYS_GPIO_IN_VAL 0x3002 /* input value of GPIO */ -#define SYS_GPIO_OUT_EN 0x3003 /* output enable of GPIO */ -#define SYS_SYS1 0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */ -#define SYS_GPIO_DIR 0x3004 /* direction control for GPIO */ -#define SYS_SYSINTE 0x3005 /* system interrupt enable */ -#define SYS_SYSINTS 0x3006 /* system interrupt status */ -#define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */ -#define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */ -#define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */ -#define SYS_DEMOD_CTL1 0x300B - -/* IrDA registers */ -#define SYS_IRRC_PSR 0x3020 /* IR protocol selection */ -#define SYS_IRRC_PER 0x3024 /* IR protocol extension */ -#define SYS_IRRC_SF 0x3028 /* IR sampling frequency */ -#define SYS_IRRC_DPIR 0x302C /* IR data package interval */ -#define SYS_IRRC_CR 0x3030 /* IR control */ -#define SYS_IRRC_RP 0x3034 /* IR read port */ -#define SYS_IRRC_SR 0x3038 /* IR status */ -/* I2C master registers */ -#define SYS_I2CCR 0x3040 /* I2C clock */ -#define SYS_I2CMCR 0x3044 /* I2C master control */ -#define SYS_I2CMSTR 0x3048 /* I2C master SCL timing */ -#define SYS_I2CMSR 0x304C /* I2C master status */ -#define SYS_I2CMFR 0x3050 /* I2C master FIFO */ - -/* - * IR registers - */ -#define IR_RX_BUF 0xFC00 -#define IR_RX_IE 0xFD00 -#define IR_RX_IF 0xFD01 -#define IR_RX_CTRL 0xFD02 -#define IR_RX_CFG 0xFD03 -#define IR_MAX_DURATION0 0xFD04 -#define IR_MAX_DURATION1 0xFD05 -#define IR_IDLE_LEN0 0xFD06 -#define IR_IDLE_LEN1 0xFD07 -#define IR_GLITCH_LEN 0xFD08 -#define IR_RX_BUF_CTRL 0xFD09 -#define IR_RX_BUF_DATA 0xFD0A -#define IR_RX_BC 0xFD0B -#define IR_RX_CLK 0xFD0C -#define IR_RX_C_COUNT_L 0xFD0D -#define IR_RX_C_COUNT_H 0xFD0E -#define IR_SUSPEND_CTRL 0xFD10 -#define IR_ERR_TOL_CTRL 0xFD11 -#define IR_UNIT_LEN 0xFD12 -#define IR_ERR_TOL_LEN 0xFD13 -#define IR_MAX_H_TOL_LEN 0xFD14 -#define IR_MAX_L_TOL_LEN 0xFD15 -#define IR_MASK_CTRL 0xFD16 -#define IR_MASK_DATA 0xFD17 -#define IR_RES_MASK_ADDR 0xFD18 -#define IR_RES_MASK_T_LEN 0xFD19 - -#endif diff --git a/drivers/media/dvb/dvb-usb-v2/usb_urb.c b/drivers/media/dvb/dvb-usb-v2/usb_urb.c deleted file mode 100644 index eaf673a3978d..000000000000 --- a/drivers/media/dvb/dvb-usb-v2/usb_urb.c +++ /dev/null @@ -1,357 +0,0 @@ -/* usb-urb.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file keeps functions for initializing and handling the - * BULK and ISOC USB data transfers in a generic way. - * Can be used for DVB-only and also, that's the plan, for - * Hybrid USB devices (analog and DVB). - */ -#include "dvb_usb_common.h" - -/* URB stuff for streaming */ - -int usb_urb_reconfig(struct usb_data_stream *stream, - struct usb_data_stream_properties *props); - -static void usb_urb_complete(struct urb *urb) -{ - struct usb_data_stream *stream = urb->context; - int ptype = usb_pipetype(urb->pipe); - int i; - u8 *b; - - dev_dbg(&stream->udev->dev, "%s: %s urb completed status=%d " \ - "length=%d/%d pack_num=%d errors=%d\n", __func__, - ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk", - urb->status, urb->actual_length, - urb->transfer_buffer_length, - urb->number_of_packets, urb->error_count); - - switch (urb->status) { - case 0: /* success */ - case -ETIMEDOUT: /* NAK */ - break; - case -ECONNRESET: /* kill */ - case -ENOENT: - case -ESHUTDOWN: - return; - default: /* error */ - dev_dbg(&stream->udev->dev, "%s: urb completition failed=%d\n", - __func__, urb->status); - break; - } - - b = (u8 *) urb->transfer_buffer; - switch (ptype) { - case PIPE_ISOCHRONOUS: - for (i = 0; i < urb->number_of_packets; i++) { - if (urb->iso_frame_desc[i].status != 0) - dev_dbg(&stream->udev->dev, "%s: iso frame " \ - "descriptor has an error=%d\n", - __func__, - urb->iso_frame_desc[i].status); - else if (urb->iso_frame_desc[i].actual_length > 0) - stream->complete(stream, - b + urb->iso_frame_desc[i].offset, - urb->iso_frame_desc[i].actual_length); - - urb->iso_frame_desc[i].status = 0; - urb->iso_frame_desc[i].actual_length = 0; - } - break; - case PIPE_BULK: - if (urb->actual_length > 0) - stream->complete(stream, b, urb->actual_length); - break; - default: - dev_err(&stream->udev->dev, "%s: unknown endpoint type in " \ - "completition handler\n", KBUILD_MODNAME); - return; - } - usb_submit_urb(urb, GFP_ATOMIC); -} - -int usb_urb_killv2(struct usb_data_stream *stream) -{ - int i; - for (i = 0; i < stream->urbs_submitted; i++) { - dev_dbg(&stream->udev->dev, "%s: kill urb=%d\n", __func__, i); - /* stop the URB */ - usb_kill_urb(stream->urb_list[i]); - } - stream->urbs_submitted = 0; - return 0; -} - -int usb_urb_submitv2(struct usb_data_stream *stream, - struct usb_data_stream_properties *props) -{ - int i, ret; - - if (props) { - ret = usb_urb_reconfig(stream, props); - if (ret < 0) - return ret; - } - - for (i = 0; i < stream->urbs_initialized; i++) { - dev_dbg(&stream->udev->dev, "%s: submit urb=%d\n", __func__, i); - ret = usb_submit_urb(stream->urb_list[i], GFP_ATOMIC); - if (ret) { - dev_err(&stream->udev->dev, "%s: could not submit " \ - "urb no. %d - get them all back\n", - KBUILD_MODNAME, i); - usb_urb_killv2(stream); - return ret; - } - stream->urbs_submitted++; - } - return 0; -} - -int usb_urb_free_urbs(struct usb_data_stream *stream) -{ - int i; - - usb_urb_killv2(stream); - - for (i = stream->urbs_initialized - 1; i >= 0; i--) { - if (stream->urb_list[i]) { - dev_dbg(&stream->udev->dev, "%s: free urb=%d\n", - __func__, i); - /* free the URBs */ - usb_free_urb(stream->urb_list[i]); - } - } - stream->urbs_initialized = 0; - - return 0; -} - -static int usb_urb_alloc_bulk_urbs(struct usb_data_stream *stream) -{ - int i, j; - - /* allocate the URBs */ - for (i = 0; i < stream->props.count; i++) { - dev_dbg(&stream->udev->dev, "%s: alloc urb=%d\n", __func__, i); - stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); - if (!stream->urb_list[i]) { - dev_dbg(&stream->udev->dev, "%s: failed\n", __func__); - for (j = 0; j < i; j++) - usb_free_urb(stream->urb_list[j]); - return -ENOMEM; - } - usb_fill_bulk_urb(stream->urb_list[i], - stream->udev, - usb_rcvbulkpipe(stream->udev, - stream->props.endpoint), - stream->buf_list[i], - stream->props.u.bulk.buffersize, - usb_urb_complete, stream); - - stream->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP; - stream->urb_list[i]->transfer_dma = stream->dma_addr[i]; - stream->urbs_initialized++; - } - return 0; -} - -static int usb_urb_alloc_isoc_urbs(struct usb_data_stream *stream) -{ - int i, j; - - /* allocate the URBs */ - for (i = 0; i < stream->props.count; i++) { - struct urb *urb; - int frame_offset = 0; - dev_dbg(&stream->udev->dev, "%s: alloc urb=%d\n", __func__, i); - stream->urb_list[i] = usb_alloc_urb( - stream->props.u.isoc.framesperurb, GFP_ATOMIC); - if (!stream->urb_list[i]) { - dev_dbg(&stream->udev->dev, "%s: failed\n", __func__); - for (j = 0; j < i; j++) - usb_free_urb(stream->urb_list[j]); - return -ENOMEM; - } - - urb = stream->urb_list[i]; - - urb->dev = stream->udev; - urb->context = stream; - urb->complete = usb_urb_complete; - urb->pipe = usb_rcvisocpipe(stream->udev, - stream->props.endpoint); - urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; - urb->interval = stream->props.u.isoc.interval; - urb->number_of_packets = stream->props.u.isoc.framesperurb; - urb->transfer_buffer_length = stream->props.u.isoc.framesize * - stream->props.u.isoc.framesperurb; - urb->transfer_buffer = stream->buf_list[i]; - urb->transfer_dma = stream->dma_addr[i]; - - for (j = 0; j < stream->props.u.isoc.framesperurb; j++) { - urb->iso_frame_desc[j].offset = frame_offset; - urb->iso_frame_desc[j].length = - stream->props.u.isoc.framesize; - frame_offset += stream->props.u.isoc.framesize; - } - - stream->urbs_initialized++; - } - return 0; -} - -int usb_free_stream_buffers(struct usb_data_stream *stream) -{ - if (stream->state & USB_STATE_URB_BUF) { - while (stream->buf_num) { - stream->buf_num--; - dev_dbg(&stream->udev->dev, "%s: free buf=%d\n", - __func__, stream->buf_num); - usb_free_coherent(stream->udev, stream->buf_size, - stream->buf_list[stream->buf_num], - stream->dma_addr[stream->buf_num]); - } - } - - stream->state &= ~USB_STATE_URB_BUF; - - return 0; -} - -int usb_alloc_stream_buffers(struct usb_data_stream *stream, int num, - unsigned long size) -{ - stream->buf_num = 0; - stream->buf_size = size; - - dev_dbg(&stream->udev->dev, "%s: all in all I will use %lu bytes for " \ - "streaming\n", __func__, num * size); - - for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) { - stream->buf_list[stream->buf_num] = usb_alloc_coherent( - stream->udev, size, GFP_ATOMIC, - &stream->dma_addr[stream->buf_num]); - if (!stream->buf_list[stream->buf_num]) { - dev_dbg(&stream->udev->dev, "%s: alloc buf=%d failed\n", - __func__, stream->buf_num); - usb_free_stream_buffers(stream); - return -ENOMEM; - } - - dev_dbg(&stream->udev->dev, "%s: alloc buf=%d %p (dma %llu)\n", - __func__, stream->buf_num, - stream->buf_list[stream->buf_num], - (long long)stream->dma_addr[stream->buf_num]); - memset(stream->buf_list[stream->buf_num], 0, size); - stream->state |= USB_STATE_URB_BUF; - } - - return 0; -} - -int usb_urb_reconfig(struct usb_data_stream *stream, - struct usb_data_stream_properties *props) -{ - int buf_size; - - if (!props) - return 0; - - /* check allocated buffers are large enough for the request */ - if (props->type == USB_BULK) { - buf_size = stream->props.u.bulk.buffersize; - } else if (props->type == USB_ISOC) { - buf_size = props->u.isoc.framesize * props->u.isoc.framesperurb; - } else { - dev_err(&stream->udev->dev, "%s: invalid endpoint type=%d\n", - KBUILD_MODNAME, props->type); - return -EINVAL; - } - - if (stream->buf_num < props->count || stream->buf_size < buf_size) { - dev_err(&stream->udev->dev, "%s: cannot reconfigure as " \ - "allocated buffers are too small\n", - KBUILD_MODNAME); - return -EINVAL; - } - - /* check if all fields are same */ - if (stream->props.type == props->type && - stream->props.count == props->count && - stream->props.endpoint == props->endpoint) { - if (props->type == USB_BULK && - props->u.bulk.buffersize == - stream->props.u.bulk.buffersize) - return 0; - else if (props->type == USB_ISOC && - props->u.isoc.framesperurb == - stream->props.u.isoc.framesperurb && - props->u.isoc.framesize == - stream->props.u.isoc.framesize && - props->u.isoc.interval == - stream->props.u.isoc.interval) - return 0; - } - - dev_dbg(&stream->udev->dev, "%s: re-alloc urbs\n", __func__); - - usb_urb_free_urbs(stream); - memcpy(&stream->props, props, sizeof(*props)); - if (props->type == USB_BULK) - return usb_urb_alloc_bulk_urbs(stream); - else if (props->type == USB_ISOC) - return usb_urb_alloc_isoc_urbs(stream); - - return 0; -} - -int usb_urb_initv2(struct usb_data_stream *stream, - const struct usb_data_stream_properties *props) -{ - int ret; - - if (!stream || !props) - return -EINVAL; - - memcpy(&stream->props, props, sizeof(*props)); - - if (!stream->complete) { - dev_err(&stream->udev->dev, "%s: there is no data callback - " \ - "this doesn't make sense\n", KBUILD_MODNAME); - return -EINVAL; - } - - switch (stream->props.type) { - case USB_BULK: - ret = usb_alloc_stream_buffers(stream, stream->props.count, - stream->props.u.bulk.buffersize); - if (ret < 0) - return ret; - - return usb_urb_alloc_bulk_urbs(stream); - case USB_ISOC: - ret = usb_alloc_stream_buffers(stream, stream->props.count, - stream->props.u.isoc.framesize * - stream->props.u.isoc.framesperurb); - if (ret < 0) - return ret; - - return usb_urb_alloc_isoc_urbs(stream); - default: - dev_err(&stream->udev->dev, "%s: unknown urb-type for data " \ - "transfer\n", KBUILD_MODNAME); - return -EINVAL; - } -} - -int usb_urb_exitv2(struct usb_data_stream *stream) -{ - usb_urb_free_urbs(stream); - usb_free_stream_buffers(stream); - - return 0; -} diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig deleted file mode 100644 index 00173ee15d4a..000000000000 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ /dev/null @@ -1,313 +0,0 @@ -config DVB_USB - tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C && RC_CORE - help - By enabling this you will be able to choose the various supported - USB1.1 and USB2.0 DVB devices. - - Almost every USB device needs a firmware, please look into - <file:Documentation/dvb/README.dvb-usb>. - - For a complete list of supported USB devices see the LinuxTV DVB Wiki: - <http://www.linuxtv.org/wiki/index.php/DVB_USB> - - Say Y if you own a USB DVB device. - -config DVB_USB_DEBUG - bool "Enable extended debug support for all DVB-USB devices" - depends on DVB_USB - help - Say Y if you want to enable debugging. See modinfo dvb-usb (and the - appropriate drivers) for debug levels. - -config DVB_USB_A800 - tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" - depends on DVB_USB - select DVB_DIB3000MC - select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. - -config DVB_USB_DIBUSB_MB - tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_DIB3000MB - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by - DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. - - For an up-to-date list of devices supported by this driver, have a look - on the Linux-DVB Wiki at www.linuxtv.org. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_USB_DIBUSB_MB_FAULTY - bool "Support faulty USB IDs" - depends on DVB_USB_DIBUSB_MB - help - Support for faulty USB IDs due to an invalid EEPROM on some Artec devices. - -config DVB_USB_DIBUSB_MC - tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" - depends on DVB_USB - select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Support for USB2.0 DVB-T receivers based on reference designs made by - DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. - - For an up-to-date list of devices supported by this driver, have a look - on the Linux-DVB Wiki at www.linuxtv.org. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_USB_DIB0700 - tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" - depends on DVB_USB - select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select DVB_DIB7000M if !DVB_FE_CUSTOMISE - select DVB_DIB8000 if !DVB_FE_CUSTOMISE - select DVB_DIB3000MC if !DVB_FE_CUSTOMISE - select DVB_S5H1411 if !DVB_FE_CUSTOMISE - select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0090 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE - help - Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The - USB bridge is also present in devices having the DiB7700 DVB-T-USB - silicon. This chip can be found in devices offered by Hauppauge, - Avermedia and other big and small companies. - - For an up-to-date list of devices supported by this driver, have a look - on the LinuxTV Wiki at www.linuxtv.org. - - Say Y if you own such a device and want to use it. You should build it as - a module. - -config DVB_USB_UMT_010 - tristate "HanfTek UMT-010 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_DIB3000MC - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - help - Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. - -config DVB_USB_CXUSB - tristate "Conexant USB2.0 hybrid reference design support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_CX22702 if !DVB_FE_CUSTOMISE - select DVB_LGDT330X if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select DVB_DIB7000P if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE - select DVB_ATBM8830 if !DVB_FE_CUSTOMISE - select DVB_LGS8GXX if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Conexant USB2.0 hybrid reference design. - Currently, only DVB and ATSC modes are supported, analog mode - shall be added in the future. Devices that require this module: - - Medion MD95700 hybrid USB2.0 device. - DViCO FusionHDTV (Bluebird) USB2.0 devices - -config DVB_USB_M920X - tristate "Uli m920x DVB-T USB2.0 support" - depends on DVB_USB - select DVB_MT352 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. - Currently, only devices with a product id of - "DTV USB MINI" (in cold state) are supported. - Firmware required. - -config DVB_USB_DIGITV - tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_NXT6000 if !DVB_FE_CUSTOMISE - select DVB_MT352 if !DVB_FE_CUSTOMISE - help - Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. - -config DVB_USB_VP7045 - tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support" - depends on DVB_USB - help - Say Y here to support the - - TwinhanDTV Alpha (stick) (VP-7045), - TwinhanDTV MagicBox II (VP-7046), - DigitalNow TinyUSB 2 DVB-t, - DigitalRise USB 2.0 Ter (Beetle) and - TYPHOON DVB-T USB DRIVE - - DVB-T USB2.0 receivers. - -config DVB_USB_VP702X - tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support" - depends on DVB_USB - help - Say Y here to support the - - TwinhanDTV StarBox, - DigitalRise USB Starbox and - TYPHOON DVB-S USB 2.0 BOX - - DVB-S USB2.0 receivers. - -config DVB_USB_GP8PSK - tristate "GENPIX 8PSK->USB module support" - depends on DVB_USB - help - Say Y here to support the - GENPIX 8psk module - - DVB-S USB2.0 receivers. - -config DVB_USB_NOVA_T_USB2 - tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" - depends on DVB_USB - select DVB_DIB3000MC - select DVB_PLL if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. - -config DVB_USB_TTUSB2 - tristate "Pinnacle 400e DVB-S USB2.0 support" - depends on DVB_USB - select DVB_TDA10086 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - select DVB_TDA826X if !DVB_FE_CUSTOMISE - help - Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The - firmware protocol used by this module is similar to the one used by the - old ttusb-driver - that's why the module is called dvb-usb-ttusb2. - -config DVB_USB_DTT200U - tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" - depends on DVB_USB - help - Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. - - The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). - - The WT-220U and its clones are pen-sized. - -config DVB_USB_OPERA1 - tristate "Opera1 DVB-S USB2.0 receiver" - depends on DVB_USB - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_PLL if !DVB_FE_CUSTOMISE - help - Say Y here to support the Opera DVB-S USB2.0 receiver. - -config DVB_USB_AF9005 - tristate "Afatech AF9005 DVB-T USB1.1 support" - depends on DVB_USB && EXPERIMENTAL - select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver - and the TerraTec Cinergy T USB XE (Rev.1) - -config DVB_USB_AF9005_REMOTE - tristate "Afatech AF9005 default remote control support" - depends on DVB_USB_AF9005 - help - Say Y here to support the default remote control decoding for the - Afatech AF9005 based receiver. - -config DVB_USB_PCTV452E - tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600" - depends on DVB_USB - select TTPCI_EEPROM - select DVB_LNBP22 if !DVB_FE_CUSTOMISE - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - help - Support for external USB adapter designed by Pinnacle, - shipped under the brand name 'PCTV HDTV Pro USB'. - Also supports TT Connect S2-3600/3650 cards. - Say Y if you own such a device and want to use it. - -config DVB_USB_DW2102 - tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support" - depends on DVB_USB - select DVB_PLL if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_STV0288 if !DVB_FE_CUSTOMISE - select DVB_STB6000 if !DVB_FE_CUSTOMISE - select DVB_CX24116 if !DVB_FE_CUSTOMISE - select DVB_SI21XX if !DVB_FE_CUSTOMISE - select DVB_TDA10023 if !DVB_FE_CUSTOMISE - select DVB_MT312 if !DVB_FE_CUSTOMISE - select DVB_ZL10039 if !DVB_FE_CUSTOMISE - select DVB_DS3000 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - select DVB_STV6110 if !DVB_FE_CUSTOMISE - select DVB_STV0900 if !DVB_FE_CUSTOMISE - help - Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0 - receivers. - -config DVB_USB_CINERGY_T2 - tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" - depends on DVB_USB - help - Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers - - Say Y if you own such a device and want to use it. - -config DVB_USB_DTV5100 - tristate "AME DTV-5100 USB2.0 DVB-T support" - depends on DVB_USB - select DVB_ZL10353 if !DVB_FE_CUSTOMISE - select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE - help - Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. - -config DVB_USB_FRIIO - tristate "Friio ISDB-T USB2.0 Receiver support" - depends on DVB_USB - help - Say Y here to support the Japanese DTV receiver Friio. - -config DVB_USB_AZ6027 - tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" - depends on DVB_USB - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE - help - Say Y here to support the AZ6027 device - -config DVB_USB_TECHNISAT_USB2 - tristate "Technisat DVB-S/S2 USB2.0 support" - depends on DVB_USB - select DVB_STV090x if !DVB_FE_CUSTOMISE - select DVB_STV6110x if !DVB_FE_CUSTOMISE - help - Say Y here to support the Technisat USB2 DVB-S/S2 device diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile deleted file mode 100644 index a5630e30eadc..000000000000 --- a/drivers/media/dvb/dvb-usb/Makefile +++ /dev/null @@ -1,82 +0,0 @@ -dvb-usb-objs = dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o dvb-usb-dvb.o dvb-usb-remote.o usb-urb.o -obj-$(CONFIG_DVB_USB) += dvb-usb.o - -dvb-usb-vp7045-objs = vp7045.o vp7045-fe.o -obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o - -dvb-usb-vp702x-objs = vp702x.o vp702x-fe.o -obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o - -dvb-usb-gp8psk-objs = gp8psk.o gp8psk-fe.o -obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o - -dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o -obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o - -dvb-usb-dibusb-common-objs = dibusb-common.o - -dvb-usb-a800-objs = a800.o -obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o - -dvb-usb-dibusb-mb-objs = dibusb-mb.o -obj-$(CONFIG_DVB_USB_DIBUSB_MB) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mb.o - -dvb-usb-dibusb-mc-objs = dibusb-mc.o -obj-$(CONFIG_DVB_USB_DIBUSB_MC) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mc.o - -dvb-usb-nova-t-usb2-objs = nova-t-usb2.o -obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2.o - -dvb-usb-umt-010-objs = umt-010.o -obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o - -dvb-usb-m920x-objs = m920x.o -obj-$(CONFIG_DVB_USB_M920X) += dvb-usb-m920x.o - -dvb-usb-digitv-objs = digitv.o -obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o - -dvb-usb-cxusb-objs = cxusb.o -obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o - -dvb-usb-ttusb2-objs = ttusb2.o -obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o - -dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o -obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o - -dvb-usb-opera-objs = opera1.o -obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o - -dvb-usb-af9005-objs = af9005.o af9005-fe.o -obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o - -dvb-usb-af9005-remote-objs = af9005-remote.o -obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o - -dvb-usb-pctv452e-objs = pctv452e.o -obj-$(CONFIG_DVB_USB_PCTV452E) += dvb-usb-pctv452e.o - -dvb-usb-dw2102-objs = dw2102.o -obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o - -dvb-usb-dtv5100-objs = dtv5100.o -obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o - -dvb-usb-cinergyT2-objs = cinergyT2-core.o cinergyT2-fe.o -obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o - -dvb-usb-friio-objs = friio.o friio-fe.o -obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o - -dvb-usb-az6027-objs = az6027.o -obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o - -dvb-usb-technisat-usb2-objs = technisat-usb2.o -obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o - -ccflags-y += -I$(srctree)/drivers/media/dvb-core -ccflags-y += -I$(srctree)/drivers/media/dvb-frontends/ -# due to tuner-xc3028 -ccflags-y += -I$(srctree)/drivers/media/common/tuners -ccflags-y += -I$(srctree)/drivers/media/dvb/ttpci diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c deleted file mode 100644 index 8d7fef84afd8..000000000000 --- a/drivers/media/dvb/dvb-usb/a800.c +++ /dev/null @@ -1,191 +0,0 @@ -/* DVB USB framework compliant Linux driver for the AVerMedia AverTV DVB-T - * USB2.0 (A800) DVB-T receiver. - * - * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) - * - * Thanks to - * - AVerMedia who kindly provided information and - * - Glen Harris who suffered from my mistakes during development. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dibusb.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define deb_rc(args...) dprintk(debug,0x01,args) - -static int a800_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - /* do nothing for the AVerMedia */ - return 0; -} - -/* assure to put cold to 0 for iManufacturer == 1 */ -static int a800_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, int *cold) -{ - *cold = udev->descriptor.iManufacturer != 1; - return 0; -} - -static struct rc_map_table rc_map_a800_table[] = { - { 0x0201, KEY_MODE }, /* SOURCE */ - { 0x0200, KEY_POWER2 }, /* POWER */ - { 0x0205, KEY_1 }, /* 1 */ - { 0x0206, KEY_2 }, /* 2 */ - { 0x0207, KEY_3 }, /* 3 */ - { 0x0209, KEY_4 }, /* 4 */ - { 0x020a, KEY_5 }, /* 5 */ - { 0x020b, KEY_6 }, /* 6 */ - { 0x020d, KEY_7 }, /* 7 */ - { 0x020e, KEY_8 }, /* 8 */ - { 0x020f, KEY_9 }, /* 9 */ - { 0x0212, KEY_LEFT }, /* L / DISPLAY */ - { 0x0211, KEY_0 }, /* 0 */ - { 0x0213, KEY_RIGHT }, /* R / CH RTN */ - { 0x0217, KEY_CAMERA }, /* SNAP SHOT */ - { 0x0210, KEY_LAST }, /* 16-CH PREV */ - { 0x021e, KEY_VOLUMEDOWN }, /* VOL DOWN */ - { 0x020c, KEY_ZOOM }, /* FULL SCREEN */ - { 0x021f, KEY_VOLUMEUP }, /* VOL UP */ - { 0x0214, KEY_MUTE }, /* MUTE */ - { 0x0208, KEY_AUDIO }, /* AUDIO */ - { 0x0219, KEY_RECORD }, /* RECORD */ - { 0x0218, KEY_PLAY }, /* PLAY */ - { 0x021b, KEY_STOP }, /* STOP */ - { 0x021a, KEY_PLAYPAUSE }, /* TIMESHIFT / PAUSE */ - { 0x021d, KEY_BACK }, /* << / RED */ - { 0x021c, KEY_FORWARD }, /* >> / YELLOW */ - { 0x0203, KEY_TEXT }, /* TELETEXT */ - { 0x0204, KEY_EPG }, /* EPG */ - { 0x0215, KEY_MENU }, /* MENU */ - - { 0x0303, KEY_CHANNELUP }, /* CH UP */ - { 0x0302, KEY_CHANNELDOWN }, /* CH DOWN */ - { 0x0301, KEY_FIRST }, /* |<< / GREEN */ - { 0x0300, KEY_LAST }, /* >>| / BLUE */ - -}; - -static int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - int ret; - u8 *key = kmalloc(5, GFP_KERNEL); - if (!key) - return -ENOMEM; - - if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0), - 0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5, - 2000) != 5) { - ret = -ENODEV; - goto out; - } - - /* call the universal NEC remote processor, to find out the key's state and event */ - dvb_usb_nec_rc_key_to_event(d,key,event,state); - if (key[0] != 0) - deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); - ret = 0; -out: - kfree(key); - return ret; -} - -/* USB Driver stuff */ -static struct dvb_usb_device_properties a800_properties; - -static int a800_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - return dvb_usb_device_init(intf, &a800_properties, - THIS_MODULE, NULL, adapter_nr); -} - -/* do not change the order of the ID table */ -static struct usb_device_id a800_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_COLD) }, -/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_WARM) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, a800_table); - -static struct dvb_usb_device_properties a800_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-avertv-a800-02.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .streaming_ctrl = dibusb2_0_streaming_ctrl, - .pid_filter = dibusb_pid_filter, - .pid_filter_ctrl = dibusb_pid_filter_ctrl, - - .frontend_attach = dibusb_dib3000mc_frontend_attach, - .tuner_attach = dibusb_dib3000mc_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - }, - }, - - .power_ctrl = a800_power_ctrl, - .identify_state = a800_identify_state, - - .rc.legacy = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_map_table = rc_map_a800_table, - .rc_map_size = ARRAY_SIZE(rc_map_a800_table), - .rc_query = a800_rc_query, - }, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - .num_device_descs = 1, - .devices = { - { "AVerMedia AverTV DVB-T USB 2.0 (A800)", - { &a800_table[0], NULL }, - { &a800_table[1], NULL }, - }, - } -}; - -static struct usb_driver a800_driver = { - .name = "dvb_usb_a800", - .probe = a800_probe, - .disconnect = dvb_usb_device_exit, - .id_table = a800_table, -}; - -module_usb_driver(a800_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("AVerMedia AverTV DVB-T USB 2.0 (A800)"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c deleted file mode 100644 index 740f3f496f12..000000000000 --- a/drivers/media/dvb/dvb-usb/af9005-fe.c +++ /dev/null @@ -1,1487 +0,0 @@ -/* Frontend part of the Linux driver for the Afatech 9005 - * USB1.1 DVB-T receiver. - * - * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) - * - * Thanks to Afatech who kindly provided information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "af9005.h" -#include "af9005-script.h" -#include "mt2060.h" -#include "qt1010.h" -#include <asm/div64.h> - -struct af9005_fe_state { - struct dvb_usb_device *d; - fe_status_t stat; - - /* retraining parameters */ - u32 original_fcw; - u16 original_rf_top; - u16 original_if_top; - u16 original_if_min; - u16 original_aci0_if_top; - u16 original_aci1_if_top; - u16 original_aci0_if_min; - u8 original_if_unplug_th; - u8 original_rf_unplug_th; - u8 original_dtop_if_unplug_th; - u8 original_dtop_rf_unplug_th; - - /* statistics */ - u32 pre_vit_error_count; - u32 pre_vit_bit_count; - u32 ber; - u32 post_vit_error_count; - u32 post_vit_bit_count; - u32 unc; - u16 abort_count; - - int opened; - int strong; - unsigned long next_status_check; - struct dvb_frontend frontend; -}; - -static int af9005_write_word_agc(struct dvb_usb_device *d, u16 reghi, - u16 reglo, u8 pos, u8 len, u16 value) -{ - int ret; - - if ((ret = af9005_write_ofdm_register(d, reglo, (u8) (value & 0xff)))) - return ret; - return af9005_write_register_bits(d, reghi, pos, len, - (u8) ((value & 0x300) >> 8)); -} - -static int af9005_read_word_agc(struct dvb_usb_device *d, u16 reghi, - u16 reglo, u8 pos, u8 len, u16 * value) -{ - int ret; - u8 temp0, temp1; - - if ((ret = af9005_read_ofdm_register(d, reglo, &temp0))) - return ret; - if ((ret = af9005_read_ofdm_register(d, reghi, &temp1))) - return ret; - switch (pos) { - case 0: - *value = ((u16) (temp1 & 0x03) << 8) + (u16) temp0; - break; - case 2: - *value = ((u16) (temp1 & 0x0C) << 6) + (u16) temp0; - break; - case 4: - *value = ((u16) (temp1 & 0x30) << 4) + (u16) temp0; - break; - case 6: - *value = ((u16) (temp1 & 0xC0) << 2) + (u16) temp0; - break; - default: - err("invalid pos in read word agc"); - return -EINVAL; - } - return 0; - -} - -static int af9005_is_fecmon_available(struct dvb_frontend *fe, int *available) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - int ret; - u8 temp; - - *available = false; - - ret = af9005_read_register_bits(state->d, xd_p_fec_vtb_rsd_mon_en, - fec_vtb_rsd_mon_en_pos, - fec_vtb_rsd_mon_en_len, &temp); - if (ret) - return ret; - if (temp & 1) { - ret = - af9005_read_register_bits(state->d, - xd_p_reg_ofsm_read_rbc_en, - reg_ofsm_read_rbc_en_pos, - reg_ofsm_read_rbc_en_len, &temp); - if (ret) - return ret; - if ((temp & 1) == 0) - *available = true; - - } - return 0; -} - -static int af9005_get_post_vit_err_cw_count(struct dvb_frontend *fe, - u32 * post_err_count, - u32 * post_cw_count, - u16 * abort_count) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - int ret; - u32 err_count; - u32 cw_count; - u8 temp, temp0, temp1, temp2; - u16 loc_abort_count; - - *post_err_count = 0; - *post_cw_count = 0; - - /* check if error bit count is ready */ - ret = - af9005_read_register_bits(state->d, xd_r_fec_rsd_ber_rdy, - fec_rsd_ber_rdy_pos, fec_rsd_ber_rdy_len, - &temp); - if (ret) - return ret; - if (!temp) { - deb_info("rsd counter not ready\n"); - return 100; - } - /* get abort count */ - ret = - af9005_read_ofdm_register(state->d, - xd_r_fec_rsd_abort_packet_cnt_7_0, - &temp0); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, - xd_r_fec_rsd_abort_packet_cnt_15_8, - &temp1); - if (ret) - return ret; - loc_abort_count = ((u16) temp1 << 8) + temp0; - - /* get error count */ - ret = - af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_7_0, - &temp0); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_15_8, - &temp1); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_23_16, - &temp2); - if (ret) - return ret; - err_count = ((u32) temp2 << 16) + ((u32) temp1 << 8) + temp0; - *post_err_count = err_count - (u32) loc_abort_count *8 * 8; - - /* get RSD packet number */ - ret = - af9005_read_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_7_0, - &temp0); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_15_8, - &temp1); - if (ret) - return ret; - cw_count = ((u32) temp1 << 8) + temp0; - if (cw_count == 0) { - err("wrong RSD packet count"); - return -EIO; - } - deb_info("POST abort count %d err count %d rsd packets %d\n", - loc_abort_count, err_count, cw_count); - *post_cw_count = cw_count - (u32) loc_abort_count; - *abort_count = loc_abort_count; - return 0; - -} - -static int af9005_get_post_vit_ber(struct dvb_frontend *fe, - u32 * post_err_count, u32 * post_cw_count, - u16 * abort_count) -{ - u32 loc_cw_count = 0, loc_err_count; - u16 loc_abort_count = 0; - int ret; - - ret = - af9005_get_post_vit_err_cw_count(fe, &loc_err_count, &loc_cw_count, - &loc_abort_count); - if (ret) - return ret; - *post_err_count = loc_err_count; - *post_cw_count = loc_cw_count * 204 * 8; - *abort_count = loc_abort_count; - - return 0; -} - -static int af9005_get_pre_vit_err_bit_count(struct dvb_frontend *fe, - u32 * pre_err_count, - u32 * pre_bit_count) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - u8 temp, temp0, temp1, temp2; - u32 super_frame_count, x, bits; - int ret; - - ret = - af9005_read_register_bits(state->d, xd_r_fec_vtb_ber_rdy, - fec_vtb_ber_rdy_pos, fec_vtb_ber_rdy_len, - &temp); - if (ret) - return ret; - if (!temp) { - deb_info("viterbi counter not ready\n"); - return 101; /* ERR_APO_VTB_COUNTER_NOT_READY; */ - } - ret = - af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_7_0, - &temp0); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_15_8, - &temp1); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_23_16, - &temp2); - if (ret) - return ret; - *pre_err_count = ((u32) temp2 << 16) + ((u32) temp1 << 8) + temp0; - - ret = - af9005_read_ofdm_register(state->d, xd_p_fec_super_frm_unit_7_0, - &temp0); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8, - &temp1); - if (ret) - return ret; - super_frame_count = ((u32) temp1 << 8) + temp0; - if (super_frame_count == 0) { - deb_info("super frame count 0\n"); - return 102; - } - - /* read fft mode */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_txmod, - reg_tpsd_txmod_pos, reg_tpsd_txmod_len, - &temp); - if (ret) - return ret; - if (temp == 0) { - /* 2K */ - x = 1512; - } else if (temp == 1) { - /* 8k */ - x = 6048; - } else { - err("Invalid fft mode"); - return -EINVAL; - } - - /* read modulation mode */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_const, - reg_tpsd_const_pos, reg_tpsd_const_len, - &temp); - if (ret) - return ret; - switch (temp) { - case 0: /* QPSK */ - bits = 2; - break; - case 1: /* QAM_16 */ - bits = 4; - break; - case 2: /* QAM_64 */ - bits = 6; - break; - default: - err("invalid modulation mode"); - return -EINVAL; - } - *pre_bit_count = super_frame_count * 68 * 4 * x * bits; - deb_info("PRE err count %d frame count %d bit count %d\n", - *pre_err_count, super_frame_count, *pre_bit_count); - return 0; -} - -static int af9005_reset_pre_viterbi(struct dvb_frontend *fe) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - int ret; - - /* set super frame count to 1 */ - ret = - af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_7_0, - 1 & 0xff); - if (ret) - return ret; - ret = af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8, - 1 >> 8); - if (ret) - return ret; - /* reset pre viterbi error count */ - ret = - af9005_write_register_bits(state->d, xd_p_fec_vtb_ber_rst, - fec_vtb_ber_rst_pos, fec_vtb_ber_rst_len, - 1); - - return ret; -} - -static int af9005_reset_post_viterbi(struct dvb_frontend *fe) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - int ret; - - /* set packet unit */ - ret = - af9005_write_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_7_0, - 10000 & 0xff); - if (ret) - return ret; - ret = - af9005_write_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_15_8, - 10000 >> 8); - if (ret) - return ret; - /* reset post viterbi error count */ - ret = - af9005_write_register_bits(state->d, xd_p_fec_rsd_ber_rst, - fec_rsd_ber_rst_pos, fec_rsd_ber_rst_len, - 1); - - return ret; -} - -static int af9005_get_statistic(struct dvb_frontend *fe) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - int ret, fecavailable; - u64 numerator, denominator; - - deb_info("GET STATISTIC\n"); - ret = af9005_is_fecmon_available(fe, &fecavailable); - if (ret) - return ret; - if (!fecavailable) { - deb_info("fecmon not available\n"); - return 0; - } - - ret = af9005_get_pre_vit_err_bit_count(fe, &state->pre_vit_error_count, - &state->pre_vit_bit_count); - if (ret == 0) { - af9005_reset_pre_viterbi(fe); - if (state->pre_vit_bit_count > 0) { - /* according to v 0.0.4 of the dvb api ber should be a multiple - of 10E-9 so we have to multiply the error count by - 10E9=1000000000 */ - numerator = - (u64) state->pre_vit_error_count * (u64) 1000000000; - denominator = (u64) state->pre_vit_bit_count; - state->ber = do_div(numerator, denominator); - } else { - state->ber = 0xffffffff; - } - } - - ret = af9005_get_post_vit_ber(fe, &state->post_vit_error_count, - &state->post_vit_bit_count, - &state->abort_count); - if (ret == 0) { - ret = af9005_reset_post_viterbi(fe); - state->unc += state->abort_count; - if (ret) - return ret; - } - return 0; -} - -static int af9005_fe_refresh_state(struct dvb_frontend *fe) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - if (time_after(jiffies, state->next_status_check)) { - deb_info("REFRESH STATE\n"); - - /* statistics */ - if (af9005_get_statistic(fe)) - err("get_statistic_failed"); - state->next_status_check = jiffies + 250 * HZ / 1000; - } - return 0; -} - -static int af9005_fe_read_status(struct dvb_frontend *fe, fe_status_t * stat) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - u8 temp; - int ret; - - if (fe->ops.tuner_ops.release == NULL) - return -ENODEV; - - *stat = 0; - ret = af9005_read_register_bits(state->d, xd_p_agc_lock, - agc_lock_pos, agc_lock_len, &temp); - if (ret) - return ret; - if (temp) - *stat |= FE_HAS_SIGNAL; - - ret = af9005_read_register_bits(state->d, xd_p_fd_tpsd_lock, - fd_tpsd_lock_pos, fd_tpsd_lock_len, - &temp); - if (ret) - return ret; - if (temp) - *stat |= FE_HAS_CARRIER; - - ret = af9005_read_register_bits(state->d, - xd_r_mp2if_sync_byte_locked, - mp2if_sync_byte_locked_pos, - mp2if_sync_byte_locked_pos, &temp); - if (ret) - return ret; - if (temp) - *stat |= FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_LOCK; - if (state->opened) - af9005_led_control(state->d, *stat & FE_HAS_LOCK); - - ret = - af9005_read_register_bits(state->d, xd_p_reg_strong_sginal_detected, - reg_strong_sginal_detected_pos, - reg_strong_sginal_detected_len, &temp); - if (ret) - return ret; - if (temp != state->strong) { - deb_info("adjust for strong signal %d\n", temp); - state->strong = temp; - } - return 0; -} - -static int af9005_fe_read_ber(struct dvb_frontend *fe, u32 * ber) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - if (fe->ops.tuner_ops.release == NULL) - return -ENODEV; - af9005_fe_refresh_state(fe); - *ber = state->ber; - return 0; -} - -static int af9005_fe_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - if (fe->ops.tuner_ops.release == NULL) - return -ENODEV; - af9005_fe_refresh_state(fe); - *unc = state->unc; - return 0; -} - -static int af9005_fe_read_signal_strength(struct dvb_frontend *fe, - u16 * strength) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - int ret; - u8 if_gain, rf_gain; - - if (fe->ops.tuner_ops.release == NULL) - return -ENODEV; - ret = - af9005_read_ofdm_register(state->d, xd_r_reg_aagc_rf_gain, - &rf_gain); - if (ret) - return ret; - ret = - af9005_read_ofdm_register(state->d, xd_r_reg_aagc_if_gain, - &if_gain); - if (ret) - return ret; - /* this value has no real meaning, but i don't have the tables that relate - the rf and if gain with the dbm, so I just scale the value */ - *strength = (512 - rf_gain - if_gain) << 7; - return 0; -} - -static int af9005_fe_read_snr(struct dvb_frontend *fe, u16 * snr) -{ - /* the snr can be derived from the ber and the modulation - but I don't think this kind of complex calculations belong - in the driver. I may be wrong.... */ - return -ENOSYS; -} - -static int af9005_fe_program_cfoe(struct dvb_usb_device *d, u32 bw) -{ - u8 temp0, temp1, temp2, temp3, buf[4]; - int ret; - u32 NS_coeff1_2048Nu; - u32 NS_coeff1_8191Nu; - u32 NS_coeff1_8192Nu; - u32 NS_coeff1_8193Nu; - u32 NS_coeff2_2k; - u32 NS_coeff2_8k; - - switch (bw) { - case 6000000: - NS_coeff1_2048Nu = 0x2ADB6DC; - NS_coeff1_8191Nu = 0xAB7313; - NS_coeff1_8192Nu = 0xAB6DB7; - NS_coeff1_8193Nu = 0xAB685C; - NS_coeff2_2k = 0x156DB6E; - NS_coeff2_8k = 0x55B6DC; - break; - - case 7000000: - NS_coeff1_2048Nu = 0x3200001; - NS_coeff1_8191Nu = 0xC80640; - NS_coeff1_8192Nu = 0xC80000; - NS_coeff1_8193Nu = 0xC7F9C0; - NS_coeff2_2k = 0x1900000; - NS_coeff2_8k = 0x640000; - break; - - case 8000000: - NS_coeff1_2048Nu = 0x3924926; - NS_coeff1_8191Nu = 0xE4996E; - NS_coeff1_8192Nu = 0xE49249; - NS_coeff1_8193Nu = 0xE48B25; - NS_coeff2_2k = 0x1C92493; - NS_coeff2_8k = 0x724925; - break; - default: - err("Invalid bandwidth %d.", bw); - return -EINVAL; - } - - /* - * write NS_coeff1_2048Nu - */ - - temp0 = (u8) (NS_coeff1_2048Nu & 0x000000FF); - temp1 = (u8) ((NS_coeff1_2048Nu & 0x0000FF00) >> 8); - temp2 = (u8) ((NS_coeff1_2048Nu & 0x00FF0000) >> 16); - temp3 = (u8) ((NS_coeff1_2048Nu & 0x03000000) >> 24); - - /* big endian to make 8051 happy */ - buf[0] = temp3; - buf[1] = temp2; - buf[2] = temp1; - buf[3] = temp0; - - /* cfoe_NS_2k_coeff1_25_24 */ - ret = af9005_write_ofdm_register(d, 0xAE00, buf[0]); - if (ret) - return ret; - - /* cfoe_NS_2k_coeff1_23_16 */ - ret = af9005_write_ofdm_register(d, 0xAE01, buf[1]); - if (ret) - return ret; - - /* cfoe_NS_2k_coeff1_15_8 */ - ret = af9005_write_ofdm_register(d, 0xAE02, buf[2]); - if (ret) - return ret; - - /* cfoe_NS_2k_coeff1_7_0 */ - ret = af9005_write_ofdm_register(d, 0xAE03, buf[3]); - if (ret) - return ret; - - /* - * write NS_coeff2_2k - */ - - temp0 = (u8) ((NS_coeff2_2k & 0x0000003F)); - temp1 = (u8) ((NS_coeff2_2k & 0x00003FC0) >> 6); - temp2 = (u8) ((NS_coeff2_2k & 0x003FC000) >> 14); - temp3 = (u8) ((NS_coeff2_2k & 0x01C00000) >> 22); - - /* big endian to make 8051 happy */ - buf[0] = temp3; - buf[1] = temp2; - buf[2] = temp1; - buf[3] = temp0; - - ret = af9005_write_ofdm_register(d, 0xAE04, buf[0]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE05, buf[1]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE06, buf[2]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE07, buf[3]); - if (ret) - return ret; - - /* - * write NS_coeff1_8191Nu - */ - - temp0 = (u8) ((NS_coeff1_8191Nu & 0x000000FF)); - temp1 = (u8) ((NS_coeff1_8191Nu & 0x0000FF00) >> 8); - temp2 = (u8) ((NS_coeff1_8191Nu & 0x00FFC000) >> 16); - temp3 = (u8) ((NS_coeff1_8191Nu & 0x03000000) >> 24); - - /* big endian to make 8051 happy */ - buf[0] = temp3; - buf[1] = temp2; - buf[2] = temp1; - buf[3] = temp0; - - ret = af9005_write_ofdm_register(d, 0xAE08, buf[0]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE09, buf[1]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE0A, buf[2]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE0B, buf[3]); - if (ret) - return ret; - - /* - * write NS_coeff1_8192Nu - */ - - temp0 = (u8) (NS_coeff1_8192Nu & 0x000000FF); - temp1 = (u8) ((NS_coeff1_8192Nu & 0x0000FF00) >> 8); - temp2 = (u8) ((NS_coeff1_8192Nu & 0x00FFC000) >> 16); - temp3 = (u8) ((NS_coeff1_8192Nu & 0x03000000) >> 24); - - /* big endian to make 8051 happy */ - buf[0] = temp3; - buf[1] = temp2; - buf[2] = temp1; - buf[3] = temp0; - - ret = af9005_write_ofdm_register(d, 0xAE0C, buf[0]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE0D, buf[1]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE0E, buf[2]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE0F, buf[3]); - if (ret) - return ret; - - /* - * write NS_coeff1_8193Nu - */ - - temp0 = (u8) ((NS_coeff1_8193Nu & 0x000000FF)); - temp1 = (u8) ((NS_coeff1_8193Nu & 0x0000FF00) >> 8); - temp2 = (u8) ((NS_coeff1_8193Nu & 0x00FFC000) >> 16); - temp3 = (u8) ((NS_coeff1_8193Nu & 0x03000000) >> 24); - - /* big endian to make 8051 happy */ - buf[0] = temp3; - buf[1] = temp2; - buf[2] = temp1; - buf[3] = temp0; - - ret = af9005_write_ofdm_register(d, 0xAE10, buf[0]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE11, buf[1]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE12, buf[2]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE13, buf[3]); - if (ret) - return ret; - - /* - * write NS_coeff2_8k - */ - - temp0 = (u8) ((NS_coeff2_8k & 0x0000003F)); - temp1 = (u8) ((NS_coeff2_8k & 0x00003FC0) >> 6); - temp2 = (u8) ((NS_coeff2_8k & 0x003FC000) >> 14); - temp3 = (u8) ((NS_coeff2_8k & 0x01C00000) >> 22); - - /* big endian to make 8051 happy */ - buf[0] = temp3; - buf[1] = temp2; - buf[2] = temp1; - buf[3] = temp0; - - ret = af9005_write_ofdm_register(d, 0xAE14, buf[0]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE15, buf[1]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE16, buf[2]); - if (ret) - return ret; - - ret = af9005_write_ofdm_register(d, 0xAE17, buf[3]); - return ret; - -} - -static int af9005_fe_select_bw(struct dvb_usb_device *d, u32 bw) -{ - u8 temp; - switch (bw) { - case 6000000: - temp = 0; - break; - case 7000000: - temp = 1; - break; - case 8000000: - temp = 2; - break; - default: - err("Invalid bandwidth %d.", bw); - return -EINVAL; - } - return af9005_write_register_bits(d, xd_g_reg_bw, reg_bw_pos, - reg_bw_len, temp); -} - -static int af9005_fe_power(struct dvb_frontend *fe, int on) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - u8 temp = on; - int ret; - deb_info("power %s tuner\n", on ? "on" : "off"); - ret = af9005_send_command(state->d, 0x03, &temp, 1, NULL, 0); - return ret; -} - -static struct mt2060_config af9005_mt2060_config = { - 0xC0 -}; - -static struct qt1010_config af9005_qt1010_config = { - 0xC4 -}; - -static int af9005_fe_init(struct dvb_frontend *fe) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - struct dvb_usb_adapter *adap = fe->dvb->priv; - int ret, i, scriptlen; - u8 temp, temp0 = 0, temp1 = 0, temp2 = 0; - u8 buf[2]; - u16 if1; - - deb_info("in af9005_fe_init\n"); - - /* reset */ - deb_info("reset\n"); - if ((ret = - af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst_en, - 4, 1, 0x01))) - return ret; - if ((ret = af9005_write_ofdm_register(state->d, APO_REG_RESET, 0))) - return ret; - /* clear ofdm reset */ - deb_info("clear ofdm reset\n"); - for (i = 0; i < 150; i++) { - if ((ret = - af9005_read_ofdm_register(state->d, - xd_I2C_reg_ofdm_rst, &temp))) - return ret; - if (temp & (regmask[reg_ofdm_rst_len - 1] << reg_ofdm_rst_pos)) - break; - msleep(10); - } - if (i == 150) - return -ETIMEDOUT; - - /*FIXME in the dump - write B200 A9 - write xd_g_reg_ofsm_clk 7 - read eepr c6 (2) - read eepr c7 (2) - misc ctrl 3 -> 1 - read eepr ca (6) - write xd_g_reg_ofsm_clk 0 - write B200 a1 - */ - ret = af9005_write_ofdm_register(state->d, 0xb200, 0xa9); - if (ret) - return ret; - ret = af9005_write_ofdm_register(state->d, xd_g_reg_ofsm_clk, 0x07); - if (ret) - return ret; - temp = 0x01; - ret = af9005_send_command(state->d, 0x03, &temp, 1, NULL, 0); - if (ret) - return ret; - ret = af9005_write_ofdm_register(state->d, xd_g_reg_ofsm_clk, 0x00); - if (ret) - return ret; - ret = af9005_write_ofdm_register(state->d, 0xb200, 0xa1); - if (ret) - return ret; - - temp = regmask[reg_ofdm_rst_len - 1] << reg_ofdm_rst_pos; - if ((ret = - af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst, - reg_ofdm_rst_pos, reg_ofdm_rst_len, 1))) - return ret; - ret = af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst, - reg_ofdm_rst_pos, reg_ofdm_rst_len, 0); - - if (ret) - return ret; - /* don't know what register aefc is, but this is what the windows driver does */ - ret = af9005_write_ofdm_register(state->d, 0xaefc, 0); - if (ret) - return ret; - - /* set stand alone chip */ - deb_info("set stand alone chip\n"); - if ((ret = - af9005_write_register_bits(state->d, xd_p_reg_dca_stand_alone, - reg_dca_stand_alone_pos, - reg_dca_stand_alone_len, 1))) - return ret; - - /* set dca upper & lower chip */ - deb_info("set dca upper & lower chip\n"); - if ((ret = - af9005_write_register_bits(state->d, xd_p_reg_dca_upper_chip, - reg_dca_upper_chip_pos, - reg_dca_upper_chip_len, 0))) - return ret; - if ((ret = - af9005_write_register_bits(state->d, xd_p_reg_dca_lower_chip, - reg_dca_lower_chip_pos, - reg_dca_lower_chip_len, 0))) - return ret; - - /* set 2wire master clock to 0x14 (for 60KHz) */ - deb_info("set 2wire master clock to 0x14 (for 60KHz)\n"); - if ((ret = - af9005_write_ofdm_register(state->d, xd_I2C_i2c_m_period, 0x14))) - return ret; - - /* clear dca enable chip */ - deb_info("clear dca enable chip\n"); - if ((ret = - af9005_write_register_bits(state->d, xd_p_reg_dca_en, - reg_dca_en_pos, reg_dca_en_len, 0))) - return ret; - /* FIXME these are register bits, but I don't know which ones */ - ret = af9005_write_ofdm_register(state->d, 0xa16c, 1); - if (ret) - return ret; - ret = af9005_write_ofdm_register(state->d, 0xa3c1, 0); - if (ret) - return ret; - - /* init other parameters: program cfoe and select bandwidth */ - deb_info("program cfoe\n"); - ret = af9005_fe_program_cfoe(state->d, 6000000); - if (ret) - return ret; - /* set read-update bit for modulation */ - deb_info("set read-update bit for modulation\n"); - if ((ret = - af9005_write_register_bits(state->d, xd_p_reg_feq_read_update, - reg_feq_read_update_pos, - reg_feq_read_update_len, 1))) - return ret; - - /* sample code has a set MPEG TS code here - but sniffing reveals that it doesn't do it */ - - /* set read-update bit to 1 for DCA modulation */ - deb_info("set read-update bit 1 for DCA modulation\n"); - if ((ret = - af9005_write_register_bits(state->d, xd_p_reg_dca_read_update, - reg_dca_read_update_pos, - reg_dca_read_update_len, 1))) - return ret; - - /* enable fec monitor */ - deb_info("enable fec monitor\n"); - if ((ret = - af9005_write_register_bits(state->d, xd_p_fec_vtb_rsd_mon_en, - fec_vtb_rsd_mon_en_pos, - fec_vtb_rsd_mon_en_len, 1))) - return ret; - - /* FIXME should be register bits, I don't know which ones */ - ret = af9005_write_ofdm_register(state->d, 0xa601, 0); - - /* set api_retrain_never_freeze */ - deb_info("set api_retrain_never_freeze\n"); - if ((ret = af9005_write_ofdm_register(state->d, 0xaefb, 0x01))) - return ret; - - /* load init script */ - deb_info("load init script\n"); - scriptlen = sizeof(script) / sizeof(RegDesc); - for (i = 0; i < scriptlen; i++) { - if ((ret = - af9005_write_register_bits(state->d, script[i].reg, - script[i].pos, - script[i].len, script[i].val))) - return ret; - /* save 3 bytes of original fcw */ - if (script[i].reg == 0xae18) - temp2 = script[i].val; - if (script[i].reg == 0xae19) - temp1 = script[i].val; - if (script[i].reg == 0xae1a) - temp0 = script[i].val; - - /* save original unplug threshold */ - if (script[i].reg == xd_p_reg_unplug_th) - state->original_if_unplug_th = script[i].val; - if (script[i].reg == xd_p_reg_unplug_rf_gain_th) - state->original_rf_unplug_th = script[i].val; - if (script[i].reg == xd_p_reg_unplug_dtop_if_gain_th) - state->original_dtop_if_unplug_th = script[i].val; - if (script[i].reg == xd_p_reg_unplug_dtop_rf_gain_th) - state->original_dtop_rf_unplug_th = script[i].val; - - } - state->original_fcw = - ((u32) temp2 << 16) + ((u32) temp1 << 8) + (u32) temp0; - - - /* save original TOPs */ - deb_info("save original TOPs\n"); - - /* RF TOP */ - ret = - af9005_read_word_agc(state->d, - xd_p_reg_aagc_rf_top_numerator_9_8, - xd_p_reg_aagc_rf_top_numerator_7_0, 0, 2, - &state->original_rf_top); - if (ret) - return ret; - - /* IF TOP */ - ret = - af9005_read_word_agc(state->d, - xd_p_reg_aagc_if_top_numerator_9_8, - xd_p_reg_aagc_if_top_numerator_7_0, 0, 2, - &state->original_if_top); - if (ret) - return ret; - - /* ACI 0 IF TOP */ - ret = - af9005_read_word_agc(state->d, 0xA60E, 0xA60A, 4, 2, - &state->original_aci0_if_top); - if (ret) - return ret; - - /* ACI 1 IF TOP */ - ret = - af9005_read_word_agc(state->d, 0xA60E, 0xA60B, 6, 2, - &state->original_aci1_if_top); - if (ret) - return ret; - - /* attach tuner and init */ - if (fe->ops.tuner_ops.release == NULL) { - /* read tuner and board id from eeprom */ - ret = af9005_read_eeprom(adap->dev, 0xc6, buf, 2); - if (ret) { - err("Impossible to read EEPROM\n"); - return ret; - } - deb_info("Tuner id %d, board id %d\n", buf[0], buf[1]); - switch (buf[0]) { - case 2: /* MT2060 */ - /* read if1 from eeprom */ - ret = af9005_read_eeprom(adap->dev, 0xc8, buf, 2); - if (ret) { - err("Impossible to read EEPROM\n"); - return ret; - } - if1 = (u16) (buf[0] << 8) + buf[1]; - if (dvb_attach(mt2060_attach, fe, &adap->dev->i2c_adap, - &af9005_mt2060_config, if1) == NULL) { - deb_info("MT2060 attach failed\n"); - return -ENODEV; - } - break; - case 3: /* QT1010 */ - case 9: /* QT1010B */ - if (dvb_attach(qt1010_attach, fe, &adap->dev->i2c_adap, - &af9005_qt1010_config) ==NULL) { - deb_info("QT1010 attach failed\n"); - return -ENODEV; - } - break; - default: - err("Unsupported tuner type %d", buf[0]); - return -ENODEV; - } - ret = fe->ops.tuner_ops.init(fe); - if (ret) - return ret; - } - - deb_info("profit!\n"); - return 0; -} - -static int af9005_fe_sleep(struct dvb_frontend *fe) -{ - return af9005_fe_power(fe, 0); -} - -static int af9005_ts_bus_ctrl(struct dvb_frontend *fe, int acquire) -{ - struct af9005_fe_state *state = fe->demodulator_priv; - - if (acquire) { - state->opened++; - } else { - - state->opened--; - if (!state->opened) - af9005_led_control(state->d, 0); - } - return 0; -} - -static int af9005_fe_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct af9005_fe_state *state = fe->demodulator_priv; - int ret; - u8 temp, temp0, temp1, temp2; - - deb_info("af9005_fe_set_frontend freq %d bw %d\n", fep->frequency, - fep->bandwidth_hz); - if (fe->ops.tuner_ops.release == NULL) { - err("Tuner not attached"); - return -ENODEV; - } - - deb_info("turn off led\n"); - /* not in the log */ - ret = af9005_led_control(state->d, 0); - if (ret) - return ret; - /* not sure about the bits */ - ret = af9005_write_register_bits(state->d, XD_MP2IF_MISC, 2, 1, 0); - if (ret) - return ret; - - /* set FCW to default value */ - deb_info("set FCW to default value\n"); - temp0 = (u8) (state->original_fcw & 0x000000ff); - temp1 = (u8) ((state->original_fcw & 0x0000ff00) >> 8); - temp2 = (u8) ((state->original_fcw & 0x00ff0000) >> 16); - ret = af9005_write_ofdm_register(state->d, 0xae1a, temp0); - if (ret) - return ret; - ret = af9005_write_ofdm_register(state->d, 0xae19, temp1); - if (ret) - return ret; - ret = af9005_write_ofdm_register(state->d, 0xae18, temp2); - if (ret) - return ret; - - /* restore original TOPs */ - deb_info("restore original TOPs\n"); - ret = - af9005_write_word_agc(state->d, - xd_p_reg_aagc_rf_top_numerator_9_8, - xd_p_reg_aagc_rf_top_numerator_7_0, 0, 2, - state->original_rf_top); - if (ret) - return ret; - ret = - af9005_write_word_agc(state->d, - xd_p_reg_aagc_if_top_numerator_9_8, - xd_p_reg_aagc_if_top_numerator_7_0, 0, 2, - state->original_if_top); - if (ret) - return ret; - ret = - af9005_write_word_agc(state->d, 0xA60E, 0xA60A, 4, 2, - state->original_aci0_if_top); - if (ret) - return ret; - ret = - af9005_write_word_agc(state->d, 0xA60E, 0xA60B, 6, 2, - state->original_aci1_if_top); - if (ret) - return ret; - - /* select bandwidth */ - deb_info("select bandwidth"); - ret = af9005_fe_select_bw(state->d, fep->bandwidth_hz); - if (ret) - return ret; - ret = af9005_fe_program_cfoe(state->d, fep->bandwidth_hz); - if (ret) - return ret; - - /* clear easy mode flag */ - deb_info("clear easy mode flag\n"); - ret = af9005_write_ofdm_register(state->d, 0xaefd, 0); - if (ret) - return ret; - - /* set unplug threshold to original value */ - deb_info("set unplug threshold to original value\n"); - ret = - af9005_write_ofdm_register(state->d, xd_p_reg_unplug_th, - state->original_if_unplug_th); - if (ret) - return ret; - /* set tuner */ - deb_info("set tuner\n"); - ret = fe->ops.tuner_ops.set_params(fe); - if (ret) - return ret; - - /* trigger ofsm */ - deb_info("trigger ofsm\n"); - temp = 0; - ret = af9005_write_tuner_registers(state->d, 0xffff, &temp, 1); - if (ret) - return ret; - - /* clear retrain and freeze flag */ - deb_info("clear retrain and freeze flag\n"); - ret = - af9005_write_register_bits(state->d, - xd_p_reg_api_retrain_request, - reg_api_retrain_request_pos, 2, 0); - if (ret) - return ret; - - /* reset pre viterbi and post viterbi registers and statistics */ - af9005_reset_pre_viterbi(fe); - af9005_reset_post_viterbi(fe); - state->pre_vit_error_count = 0; - state->pre_vit_bit_count = 0; - state->ber = 0; - state->post_vit_error_count = 0; - /* state->unc = 0; commented out since it should be ever increasing */ - state->abort_count = 0; - - state->next_status_check = jiffies; - state->strong = -1; - - return 0; -} - -static int af9005_fe_get_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct af9005_fe_state *state = fe->demodulator_priv; - int ret; - u8 temp; - - /* mode */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_const, - reg_tpsd_const_pos, reg_tpsd_const_len, - &temp); - if (ret) - return ret; - deb_info("===== fe_get_frontend_legacy = =============\n"); - deb_info("CONSTELLATION "); - switch (temp) { - case 0: - fep->modulation = QPSK; - deb_info("QPSK\n"); - break; - case 1: - fep->modulation = QAM_16; - deb_info("QAM_16\n"); - break; - case 2: - fep->modulation = QAM_64; - deb_info("QAM_64\n"); - break; - } - - /* tps hierarchy and alpha value */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_hier, - reg_tpsd_hier_pos, reg_tpsd_hier_len, - &temp); - if (ret) - return ret; - deb_info("HIERARCHY "); - switch (temp) { - case 0: - fep->hierarchy = HIERARCHY_NONE; - deb_info("NONE\n"); - break; - case 1: - fep->hierarchy = HIERARCHY_1; - deb_info("1\n"); - break; - case 2: - fep->hierarchy = HIERARCHY_2; - deb_info("2\n"); - break; - case 3: - fep->hierarchy = HIERARCHY_4; - deb_info("4\n"); - break; - } - - /* high/low priority */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_dec_pri, - reg_dec_pri_pos, reg_dec_pri_len, &temp); - if (ret) - return ret; - /* if temp is set = high priority */ - deb_info("PRIORITY %s\n", temp ? "high" : "low"); - - /* high coderate */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_hpcr, - reg_tpsd_hpcr_pos, reg_tpsd_hpcr_len, - &temp); - if (ret) - return ret; - deb_info("CODERATE HP "); - switch (temp) { - case 0: - fep->code_rate_HP = FEC_1_2; - deb_info("FEC_1_2\n"); - break; - case 1: - fep->code_rate_HP = FEC_2_3; - deb_info("FEC_2_3\n"); - break; - case 2: - fep->code_rate_HP = FEC_3_4; - deb_info("FEC_3_4\n"); - break; - case 3: - fep->code_rate_HP = FEC_5_6; - deb_info("FEC_5_6\n"); - break; - case 4: - fep->code_rate_HP = FEC_7_8; - deb_info("FEC_7_8\n"); - break; - } - - /* low coderate */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_lpcr, - reg_tpsd_lpcr_pos, reg_tpsd_lpcr_len, - &temp); - if (ret) - return ret; - deb_info("CODERATE LP "); - switch (temp) { - case 0: - fep->code_rate_LP = FEC_1_2; - deb_info("FEC_1_2\n"); - break; - case 1: - fep->code_rate_LP = FEC_2_3; - deb_info("FEC_2_3\n"); - break; - case 2: - fep->code_rate_LP = FEC_3_4; - deb_info("FEC_3_4\n"); - break; - case 3: - fep->code_rate_LP = FEC_5_6; - deb_info("FEC_5_6\n"); - break; - case 4: - fep->code_rate_LP = FEC_7_8; - deb_info("FEC_7_8\n"); - break; - } - - /* guard interval */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_gi, - reg_tpsd_gi_pos, reg_tpsd_gi_len, &temp); - if (ret) - return ret; - deb_info("GUARD INTERVAL "); - switch (temp) { - case 0: - fep->guard_interval = GUARD_INTERVAL_1_32; - deb_info("1_32\n"); - break; - case 1: - fep->guard_interval = GUARD_INTERVAL_1_16; - deb_info("1_16\n"); - break; - case 2: - fep->guard_interval = GUARD_INTERVAL_1_8; - deb_info("1_8\n"); - break; - case 3: - fep->guard_interval = GUARD_INTERVAL_1_4; - deb_info("1_4\n"); - break; - } - - /* fft */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_tpsd_txmod, - reg_tpsd_txmod_pos, reg_tpsd_txmod_len, - &temp); - if (ret) - return ret; - deb_info("TRANSMISSION MODE "); - switch (temp) { - case 0: - fep->transmission_mode = TRANSMISSION_MODE_2K; - deb_info("2K\n"); - break; - case 1: - fep->transmission_mode = TRANSMISSION_MODE_8K; - deb_info("8K\n"); - break; - } - - /* bandwidth */ - ret = - af9005_read_register_bits(state->d, xd_g_reg_bw, reg_bw_pos, - reg_bw_len, &temp); - deb_info("BANDWIDTH "); - switch (temp) { - case 0: - fep->bandwidth_hz = 6000000; - deb_info("6\n"); - break; - case 1: - fep->bandwidth_hz = 7000000; - deb_info("7\n"); - break; - case 2: - fep->bandwidth_hz = 8000000; - deb_info("8\n"); - break; - } - return 0; -} - -static void af9005_fe_release(struct dvb_frontend *fe) -{ - struct af9005_fe_state *state = - (struct af9005_fe_state *)fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops af9005_fe_ops; - -struct dvb_frontend *af9005_fe_attach(struct dvb_usb_device *d) -{ - struct af9005_fe_state *state = NULL; - - /* allocate memory for the internal state */ - state = kzalloc(sizeof(struct af9005_fe_state), GFP_KERNEL); - if (state == NULL) - goto error; - - deb_info("attaching frontend af9005\n"); - - state->d = d; - state->opened = 0; - - memcpy(&state->frontend.ops, &af9005_fe_ops, - sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = state; - - return &state->frontend; - error: - return NULL; -} - -static struct dvb_frontend_ops af9005_fe_ops = { - .delsys = { SYS_DVBT }, - .info = { - .name = "AF9005 USB DVB-T", - .frequency_min = 44250000, - .frequency_max = 867250000, - .frequency_stepsize = 250000, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | - FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = af9005_fe_release, - - .init = af9005_fe_init, - .sleep = af9005_fe_sleep, - .ts_bus_ctrl = af9005_ts_bus_ctrl, - - .set_frontend = af9005_fe_set_frontend, - .get_frontend = af9005_fe_get_frontend, - - .read_status = af9005_fe_read_status, - .read_ber = af9005_fe_read_ber, - .read_signal_strength = af9005_fe_read_signal_strength, - .read_snr = af9005_fe_read_snr, - .read_ucblocks = af9005_fe_read_unc_blocks, -}; diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c deleted file mode 100644 index 7e3961d0db6b..000000000000 --- a/drivers/media/dvb/dvb-usb/af9005-remote.c +++ /dev/null @@ -1,157 +0,0 @@ -/* DVB USB compliant Linux driver for the Afatech 9005 - * USB1.1 DVB-T receiver. - * - * Standard remote decode function - * - * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) - * - * Thanks to Afatech who kindly provided information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "af9005.h" -/* debug */ -static int dvb_usb_af9005_remote_debug; -module_param_named(debug, dvb_usb_af9005_remote_debug, int, 0644); -MODULE_PARM_DESC(debug, - "enable (1) or disable (0) debug messages." - DVB_USB_DEBUG_STATUS); - -#define deb_decode(args...) dprintk(dvb_usb_af9005_remote_debug,0x01,args) - -struct rc_map_table rc_map_af9005_table[] = { - - {0x01b7, KEY_POWER}, - {0x01a7, KEY_VOLUMEUP}, - {0x0187, KEY_CHANNELUP}, - {0x017f, KEY_MUTE}, - {0x01bf, KEY_VOLUMEDOWN}, - {0x013f, KEY_CHANNELDOWN}, - {0x01df, KEY_1}, - {0x015f, KEY_2}, - {0x019f, KEY_3}, - {0x011f, KEY_4}, - {0x01ef, KEY_5}, - {0x016f, KEY_6}, - {0x01af, KEY_7}, - {0x0127, KEY_8}, - {0x0107, KEY_9}, - {0x01cf, KEY_ZOOM}, - {0x014f, KEY_0}, - {0x018f, KEY_GOTO}, /* marked jump on the remote */ - - {0x00bd, KEY_POWER}, - {0x007d, KEY_VOLUMEUP}, - {0x00fd, KEY_CHANNELUP}, - {0x009d, KEY_MUTE}, - {0x005d, KEY_VOLUMEDOWN}, - {0x00dd, KEY_CHANNELDOWN}, - {0x00ad, KEY_1}, - {0x006d, KEY_2}, - {0x00ed, KEY_3}, - {0x008d, KEY_4}, - {0x004d, KEY_5}, - {0x00cd, KEY_6}, - {0x00b5, KEY_7}, - {0x0075, KEY_8}, - {0x00f5, KEY_9}, - {0x0095, KEY_ZOOM}, - {0x0055, KEY_0}, - {0x00d5, KEY_GOTO}, /* marked jump on the remote */ -}; - -int rc_map_af9005_table_size = ARRAY_SIZE(rc_map_af9005_table); - -static int repeatable_keys[] = { - KEY_VOLUMEUP, - KEY_VOLUMEDOWN, - KEY_CHANNELUP, - KEY_CHANNELDOWN -}; - -int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event, - int *state) -{ - u16 mark, space; - u32 result; - u8 cust, dat, invdat; - int i; - - if (len >= 6) { - mark = (u16) (data[0] << 8) + data[1]; - space = (u16) (data[2] << 8) + data[3]; - if (space * 3 < mark) { - for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { - if (d->last_event == repeatable_keys[i]) { - *state = REMOTE_KEY_REPEAT; - *event = d->last_event; - deb_decode("repeat key, event %x\n", - *event); - return 0; - } - } - deb_decode("repeated key ignored (non repeatable)\n"); - return 0; - } else if (len >= 33 * 4) { /*32 bits + start code */ - result = 0; - for (i = 4; i < 4 + 32 * 4; i += 4) { - result <<= 1; - mark = (u16) (data[i] << 8) + data[i + 1]; - mark >>= 1; - space = (u16) (data[i + 2] << 8) + data[i + 3]; - space >>= 1; - if (mark * 2 > space) - result += 1; - } - deb_decode("key pressed, raw value %x\n", result); - if ((result & 0xff000000) != 0xfe000000) { - deb_decode - ("doesn't start with 0xfe, ignored\n"); - return 0; - } - cust = (result >> 16) & 0xff; - dat = (result >> 8) & 0xff; - invdat = (~result) & 0xff; - if (dat != invdat) { - deb_decode("code != inverted code\n"); - return 0; - } - for (i = 0; i < rc_map_af9005_table_size; i++) { - if (rc5_custom(&rc_map_af9005_table[i]) == cust - && rc5_data(&rc_map_af9005_table[i]) == dat) { - *event = rc_map_af9005_table[i].keycode; - *state = REMOTE_KEY_PRESSED; - deb_decode - ("key pressed, event %x\n", *event); - return 0; - } - } - deb_decode("not found in table\n"); - } - } - return 0; -} - -EXPORT_SYMBOL(rc_map_af9005_table); -EXPORT_SYMBOL(rc_map_af9005_table_size); -EXPORT_SYMBOL(af9005_rc_decode); - -MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>"); -MODULE_DESCRIPTION - ("Standard remote control decoder for Afatech 9005 DVB-T USB1.1 stick"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/af9005-script.h b/drivers/media/dvb/dvb-usb/af9005-script.h deleted file mode 100644 index 4d69045426dd..000000000000 --- a/drivers/media/dvb/dvb-usb/af9005-script.h +++ /dev/null @@ -1,203 +0,0 @@ -/* -File automatically generated by createinit.py using data -extracted from AF05BDA.sys (windows driver): - -dd if=AF05BDA.sys of=initsequence bs=1 skip=88316 count=1110 -python createinit.py > af9005-script.h - -*/ - -typedef struct { - u16 reg; - u8 pos; - u8 len; - u8 val; -} RegDesc; - -static RegDesc script[] = { - {0xa180, 0x0, 0x8, 0xa}, - {0xa181, 0x0, 0x8, 0xd7}, - {0xa182, 0x0, 0x8, 0xa3}, - {0xa0a0, 0x0, 0x8, 0x0}, - {0xa0a1, 0x0, 0x5, 0x0}, - {0xa0a1, 0x5, 0x1, 0x1}, - {0xa0c0, 0x0, 0x4, 0x1}, - {0xa20e, 0x4, 0x4, 0xa}, - {0xa20f, 0x0, 0x8, 0x40}, - {0xa210, 0x0, 0x8, 0x8}, - {0xa32a, 0x0, 0x4, 0xa}, - {0xa32c, 0x0, 0x8, 0x20}, - {0xa32b, 0x0, 0x8, 0x15}, - {0xa1a0, 0x1, 0x1, 0x1}, - {0xa000, 0x0, 0x1, 0x1}, - {0xa000, 0x1, 0x1, 0x0}, - {0xa001, 0x1, 0x1, 0x1}, - {0xa001, 0x0, 0x1, 0x0}, - {0xa001, 0x5, 0x1, 0x0}, - {0xa00e, 0x0, 0x5, 0x10}, - {0xa00f, 0x0, 0x3, 0x4}, - {0xa00f, 0x3, 0x3, 0x5}, - {0xa010, 0x0, 0x3, 0x4}, - {0xa010, 0x3, 0x3, 0x5}, - {0xa016, 0x4, 0x4, 0x3}, - {0xa01f, 0x0, 0x6, 0xa}, - {0xa020, 0x0, 0x6, 0xa}, - {0xa2bc, 0x0, 0x1, 0x1}, - {0xa2bc, 0x5, 0x1, 0x1}, - {0xa015, 0x0, 0x8, 0x50}, - {0xa016, 0x0, 0x1, 0x0}, - {0xa02a, 0x0, 0x8, 0x50}, - {0xa029, 0x0, 0x8, 0x4b}, - {0xa614, 0x0, 0x8, 0x46}, - {0xa002, 0x0, 0x5, 0x19}, - {0xa003, 0x0, 0x5, 0x1a}, - {0xa004, 0x0, 0x5, 0x19}, - {0xa005, 0x0, 0x5, 0x1a}, - {0xa008, 0x0, 0x8, 0x69}, - {0xa009, 0x0, 0x2, 0x2}, - {0xae1b, 0x0, 0x8, 0x69}, - {0xae1c, 0x0, 0x8, 0x2}, - {0xae1d, 0x0, 0x8, 0x2a}, - {0xa022, 0x0, 0x8, 0xaa}, - {0xa006, 0x0, 0x8, 0xc8}, - {0xa007, 0x0, 0x2, 0x0}, - {0xa00c, 0x0, 0x8, 0xba}, - {0xa00d, 0x0, 0x2, 0x2}, - {0xa608, 0x0, 0x8, 0xba}, - {0xa60e, 0x0, 0x2, 0x2}, - {0xa609, 0x0, 0x8, 0x80}, - {0xa60e, 0x2, 0x2, 0x3}, - {0xa00a, 0x0, 0x8, 0xb6}, - {0xa00b, 0x0, 0x2, 0x0}, - {0xa011, 0x0, 0x8, 0xb9}, - {0xa012, 0x0, 0x2, 0x0}, - {0xa013, 0x0, 0x8, 0xbd}, - {0xa014, 0x0, 0x2, 0x2}, - {0xa366, 0x0, 0x1, 0x1}, - {0xa2bc, 0x3, 0x1, 0x0}, - {0xa2bd, 0x0, 0x8, 0xa}, - {0xa2be, 0x0, 0x8, 0x14}, - {0xa2bf, 0x0, 0x8, 0x8}, - {0xa60a, 0x0, 0x8, 0xbd}, - {0xa60e, 0x4, 0x2, 0x2}, - {0xa60b, 0x0, 0x8, 0x86}, - {0xa60e, 0x6, 0x2, 0x3}, - {0xa001, 0x2, 0x2, 0x1}, - {0xa1c7, 0x0, 0x8, 0xf5}, - {0xa03d, 0x0, 0x8, 0xb1}, - {0xa616, 0x0, 0x8, 0xff}, - {0xa617, 0x0, 0x8, 0xad}, - {0xa618, 0x0, 0x8, 0xad}, - {0xa61e, 0x3, 0x1, 0x1}, - {0xae1a, 0x0, 0x8, 0x0}, - {0xae19, 0x0, 0x8, 0xc8}, - {0xae18, 0x0, 0x8, 0x61}, - {0xa140, 0x0, 0x8, 0x0}, - {0xa141, 0x0, 0x8, 0xc8}, - {0xa142, 0x0, 0x7, 0x61}, - {0xa023, 0x0, 0x8, 0xff}, - {0xa021, 0x0, 0x8, 0xad}, - {0xa026, 0x0, 0x1, 0x0}, - {0xa024, 0x0, 0x8, 0xff}, - {0xa025, 0x0, 0x8, 0xff}, - {0xa1c8, 0x0, 0x8, 0xf}, - {0xa2bc, 0x1, 0x1, 0x0}, - {0xa60c, 0x0, 0x4, 0x5}, - {0xa60c, 0x4, 0x4, 0x6}, - {0xa60d, 0x0, 0x8, 0xa}, - {0xa371, 0x0, 0x1, 0x1}, - {0xa366, 0x1, 0x3, 0x7}, - {0xa338, 0x0, 0x8, 0x10}, - {0xa339, 0x0, 0x6, 0x7}, - {0xa33a, 0x0, 0x6, 0x1f}, - {0xa33b, 0x0, 0x8, 0xf6}, - {0xa33c, 0x3, 0x5, 0x4}, - {0xa33d, 0x4, 0x4, 0x0}, - {0xa33d, 0x1, 0x1, 0x1}, - {0xa33d, 0x2, 0x1, 0x1}, - {0xa33d, 0x3, 0x1, 0x1}, - {0xa16d, 0x0, 0x4, 0xf}, - {0xa161, 0x0, 0x5, 0x5}, - {0xa162, 0x0, 0x4, 0x5}, - {0xa165, 0x0, 0x8, 0xff}, - {0xa166, 0x0, 0x8, 0x9c}, - {0xa2c3, 0x0, 0x4, 0x5}, - {0xa61a, 0x0, 0x6, 0xf}, - {0xb200, 0x0, 0x8, 0xa1}, - {0xb201, 0x0, 0x8, 0x7}, - {0xa093, 0x0, 0x1, 0x0}, - {0xa093, 0x1, 0x5, 0xf}, - {0xa094, 0x0, 0x8, 0xff}, - {0xa095, 0x0, 0x8, 0xf}, - {0xa080, 0x2, 0x5, 0x3}, - {0xa081, 0x0, 0x4, 0x0}, - {0xa081, 0x4, 0x4, 0x9}, - {0xa082, 0x0, 0x5, 0x1f}, - {0xa08d, 0x0, 0x8, 0x1}, - {0xa083, 0x0, 0x8, 0x32}, - {0xa084, 0x0, 0x1, 0x0}, - {0xa08e, 0x0, 0x8, 0x3}, - {0xa085, 0x0, 0x8, 0x32}, - {0xa086, 0x0, 0x3, 0x0}, - {0xa087, 0x0, 0x8, 0x6e}, - {0xa088, 0x0, 0x5, 0x15}, - {0xa089, 0x0, 0x8, 0x0}, - {0xa08a, 0x0, 0x5, 0x19}, - {0xa08b, 0x0, 0x8, 0x92}, - {0xa08c, 0x0, 0x5, 0x1c}, - {0xa120, 0x0, 0x8, 0x0}, - {0xa121, 0x0, 0x5, 0x10}, - {0xa122, 0x0, 0x8, 0x0}, - {0xa123, 0x0, 0x7, 0x40}, - {0xa123, 0x7, 0x1, 0x0}, - {0xa124, 0x0, 0x8, 0x13}, - {0xa125, 0x0, 0x7, 0x10}, - {0xa1c0, 0x0, 0x8, 0x0}, - {0xa1c1, 0x0, 0x5, 0x4}, - {0xa1c2, 0x0, 0x8, 0x0}, - {0xa1c3, 0x0, 0x5, 0x10}, - {0xa1c3, 0x5, 0x3, 0x0}, - {0xa1c4, 0x0, 0x6, 0x0}, - {0xa1c5, 0x0, 0x7, 0x10}, - {0xa100, 0x0, 0x8, 0x0}, - {0xa101, 0x0, 0x5, 0x10}, - {0xa102, 0x0, 0x8, 0x0}, - {0xa103, 0x0, 0x7, 0x40}, - {0xa103, 0x7, 0x1, 0x0}, - {0xa104, 0x0, 0x8, 0x18}, - {0xa105, 0x0, 0x7, 0xa}, - {0xa106, 0x0, 0x8, 0x20}, - {0xa107, 0x0, 0x8, 0x40}, - {0xa108, 0x0, 0x4, 0x0}, - {0xa38c, 0x0, 0x8, 0xfc}, - {0xa38d, 0x0, 0x8, 0x0}, - {0xa38e, 0x0, 0x8, 0x7e}, - {0xa38f, 0x0, 0x8, 0x0}, - {0xa390, 0x0, 0x8, 0x2f}, - {0xa60f, 0x5, 0x1, 0x1}, - {0xa170, 0x0, 0x8, 0xdc}, - {0xa171, 0x0, 0x2, 0x0}, - {0xa2ae, 0x0, 0x1, 0x1}, - {0xa2ae, 0x1, 0x1, 0x1}, - {0xa392, 0x0, 0x1, 0x1}, - {0xa391, 0x2, 0x1, 0x0}, - {0xabc1, 0x0, 0x8, 0xff}, - {0xabc2, 0x0, 0x8, 0x0}, - {0xabc8, 0x0, 0x8, 0x8}, - {0xabca, 0x0, 0x8, 0x10}, - {0xabcb, 0x0, 0x1, 0x0}, - {0xabc3, 0x5, 0x3, 0x7}, - {0xabc0, 0x6, 0x1, 0x0}, - {0xabc0, 0x4, 0x2, 0x0}, - {0xa344, 0x4, 0x4, 0x1}, - {0xabc0, 0x7, 0x1, 0x1}, - {0xabc0, 0x2, 0x1, 0x1}, - {0xa345, 0x0, 0x8, 0x66}, - {0xa346, 0x0, 0x8, 0x66}, - {0xa347, 0x0, 0x4, 0x0}, - {0xa343, 0x0, 0x4, 0xa}, - {0xa347, 0x4, 0x4, 0x2}, - {0xa348, 0x0, 0x4, 0xc}, - {0xa348, 0x4, 0x4, 0x7}, - {0xa349, 0x0, 0x6, 0x2}, -}; diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c deleted file mode 100644 index af176b6ce738..000000000000 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ /dev/null @@ -1,1117 +0,0 @@ -/* DVB USB compliant Linux driver for the Afatech 9005 - * USB1.1 DVB-T receiver. - * - * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) - * - * Thanks to Afatech who kindly provided information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "af9005.h" - -/* debug */ -int dvb_usb_af9005_debug; -module_param_named(debug, dvb_usb_af9005_debug, int, 0644); -MODULE_PARM_DESC(debug, - "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." - DVB_USB_DEBUG_STATUS); -/* enable obnoxious led */ -bool dvb_usb_af9005_led = 1; -module_param_named(led, dvb_usb_af9005_led, bool, 0644); -MODULE_PARM_DESC(led, "enable led (default: 1)."); - -/* eeprom dump */ -static int dvb_usb_af9005_dump_eeprom; -module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); -MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -/* remote control decoder */ -static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, - u32 *event, int *state); -static void *rc_keys; -static int *rc_keys_size; - -u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; - -struct af9005_device_state { - u8 sequence; - int led_state; -}; - -static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, - int readwrite, int type, u8 * values, int len) -{ - struct af9005_device_state *st = d->priv; - u8 obuf[16] = { 0 }; - u8 ibuf[17] = { 0 }; - u8 command; - int i; - int ret; - - if (len < 1) { - err("generic read/write, less than 1 byte. Makes no sense."); - return -EINVAL; - } - if (len > 8) { - err("generic read/write, more than 8 bytes. Not supported."); - return -EINVAL; - } - - obuf[0] = 14; /* rest of buffer length low */ - obuf[1] = 0; /* rest of buffer length high */ - - obuf[2] = AF9005_REGISTER_RW; /* register operation */ - obuf[3] = 12; /* rest of buffer length */ - - obuf[4] = st->sequence++; /* sequence number */ - - obuf[5] = (u8) (reg >> 8); /* register address */ - obuf[6] = (u8) (reg & 0xff); - - if (type == AF9005_OFDM_REG) { - command = AF9005_CMD_OFDM_REG; - } else { - command = AF9005_CMD_TUNER; - } - - if (len > 1) - command |= - AF9005_CMD_BURST | AF9005_CMD_AUTOINC | (len - 1) << 3; - command |= readwrite; - if (readwrite == AF9005_CMD_WRITE) - for (i = 0; i < len; i++) - obuf[8 + i] = values[i]; - else if (type == AF9005_TUNER_REG) - /* read command for tuner, the first byte contains the i2c address */ - obuf[8] = values[0]; - obuf[7] = command; - - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); - if (ret) - return ret; - - /* sanity check */ - if (ibuf[2] != AF9005_REGISTER_RW_ACK) { - err("generic read/write, wrong reply code."); - return -EIO; - } - if (ibuf[3] != 0x0d) { - err("generic read/write, wrong length in reply."); - return -EIO; - } - if (ibuf[4] != obuf[4]) { - err("generic read/write, wrong sequence in reply."); - return -EIO; - } - /* - Windows driver doesn't check these fields, in fact sometimes - the register in the reply is different that what has been sent - - if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { - err("generic read/write, wrong register in reply."); - return -EIO; - } - if (ibuf[7] != command) { - err("generic read/write wrong command in reply."); - return -EIO; - } - */ - if (ibuf[16] != 0x01) { - err("generic read/write wrong status code in reply."); - return -EIO; - } - if (readwrite == AF9005_CMD_READ) - for (i = 0; i < len; i++) - values[i] = ibuf[8 + i]; - - return 0; - -} - -int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 * value) -{ - int ret; - deb_reg("read register %x ", reg); - ret = af9005_generic_read_write(d, reg, - AF9005_CMD_READ, AF9005_OFDM_REG, - value, 1); - if (ret) - deb_reg("failed\n"); - else - deb_reg("value %x\n", *value); - return ret; -} - -int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, - u8 * values, int len) -{ - int ret; - deb_reg("read %d registers %x ", len, reg); - ret = af9005_generic_read_write(d, reg, - AF9005_CMD_READ, AF9005_OFDM_REG, - values, len); - if (ret) - deb_reg("failed\n"); - else - debug_dump(values, len, deb_reg); - return ret; -} - -int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 value) -{ - int ret; - u8 temp = value; - deb_reg("write register %x value %x ", reg, value); - ret = af9005_generic_read_write(d, reg, - AF9005_CMD_WRITE, AF9005_OFDM_REG, - &temp, 1); - if (ret) - deb_reg("failed\n"); - else - deb_reg("ok\n"); - return ret; -} - -int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, - u8 * values, int len) -{ - int ret; - deb_reg("write %d registers %x values ", len, reg); - debug_dump(values, len, deb_reg); - - ret = af9005_generic_read_write(d, reg, - AF9005_CMD_WRITE, AF9005_OFDM_REG, - values, len); - if (ret) - deb_reg("failed\n"); - else - deb_reg("ok\n"); - return ret; -} - -int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, - u8 len, u8 * value) -{ - u8 temp; - int ret; - deb_reg("read bits %x %x %x", reg, pos, len); - ret = af9005_read_ofdm_register(d, reg, &temp); - if (ret) { - deb_reg(" failed\n"); - return ret; - } - *value = (temp >> pos) & regmask[len - 1]; - deb_reg(" value %x\n", *value); - return 0; - -} - -int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, - u8 len, u8 value) -{ - u8 temp, mask; - int ret; - deb_reg("write bits %x %x %x value %x\n", reg, pos, len, value); - if (pos == 0 && len == 8) - return af9005_write_ofdm_register(d, reg, value); - ret = af9005_read_ofdm_register(d, reg, &temp); - if (ret) - return ret; - mask = regmask[len - 1] << pos; - temp = (temp & ~mask) | ((value << pos) & mask); - return af9005_write_ofdm_register(d, reg, temp); - -} - -static int af9005_usb_read_tuner_registers(struct dvb_usb_device *d, - u16 reg, u8 * values, int len) -{ - return af9005_generic_read_write(d, reg, - AF9005_CMD_READ, AF9005_TUNER_REG, - values, len); -} - -static int af9005_usb_write_tuner_registers(struct dvb_usb_device *d, - u16 reg, u8 * values, int len) -{ - return af9005_generic_read_write(d, reg, - AF9005_CMD_WRITE, - AF9005_TUNER_REG, values, len); -} - -int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, - u8 * values, int len) -{ - /* don't let the name of this function mislead you: it's just used - as an interface from the firmware to the i2c bus. The actual - i2c addresses are contained in the data */ - int ret, i, done = 0, fail = 0; - u8 temp; - ret = af9005_usb_write_tuner_registers(d, reg, values, len); - if (ret) - return ret; - if (reg != 0xffff) { - /* check if write done (0xa40d bit 1) or fail (0xa40d bit 2) */ - for (i = 0; i < 200; i++) { - ret = - af9005_read_ofdm_register(d, - xd_I2C_i2c_m_status_wdat_done, - &temp); - if (ret) - return ret; - done = temp & (regmask[i2c_m_status_wdat_done_len - 1] - << i2c_m_status_wdat_done_pos); - if (done) - break; - fail = temp & (regmask[i2c_m_status_wdat_fail_len - 1] - << i2c_m_status_wdat_fail_pos); - if (fail) - break; - msleep(50); - } - if (i == 200) - return -ETIMEDOUT; - if (fail) { - /* clear write fail bit */ - af9005_write_register_bits(d, - xd_I2C_i2c_m_status_wdat_fail, - i2c_m_status_wdat_fail_pos, - i2c_m_status_wdat_fail_len, - 1); - return -EIO; - } - /* clear write done bit */ - ret = - af9005_write_register_bits(d, - xd_I2C_i2c_m_status_wdat_fail, - i2c_m_status_wdat_done_pos, - i2c_m_status_wdat_done_len, 1); - if (ret) - return ret; - } - return 0; -} - -int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 addr, - u8 * values, int len) -{ - /* don't let the name of this function mislead you: it's just used - as an interface from the firmware to the i2c bus. The actual - i2c addresses are contained in the data */ - int ret, i; - u8 temp, buf[2]; - - buf[0] = addr; /* tuner i2c address */ - buf[1] = values[0]; /* tuner register */ - - values[0] = addr + 0x01; /* i2c read address */ - - if (reg == APO_REG_I2C_RW_SILICON_TUNER) { - /* write tuner i2c address to tuner, 0c00c0 undocumented, found by sniffing */ - ret = af9005_write_tuner_registers(d, 0x00c0, buf, 2); - if (ret) - return ret; - } - - /* send read command to ofsm */ - ret = af9005_usb_read_tuner_registers(d, reg, values, 1); - if (ret) - return ret; - - /* check if read done */ - for (i = 0; i < 200; i++) { - ret = af9005_read_ofdm_register(d, 0xa408, &temp); - if (ret) - return ret; - if (temp & 0x01) - break; - msleep(50); - } - if (i == 200) - return -ETIMEDOUT; - - /* clear read done bit (by writing 1) */ - ret = af9005_write_ofdm_register(d, xd_I2C_i2c_m_data8, 1); - if (ret) - return ret; - - /* get read data (available from 0xa400) */ - for (i = 0; i < len; i++) { - ret = af9005_read_ofdm_register(d, 0xa400 + i, &temp); - if (ret) - return ret; - values[i] = temp; - } - return 0; -} - -static int af9005_i2c_write(struct dvb_usb_device *d, u8 i2caddr, u8 reg, - u8 * data, int len) -{ - int ret, i; - u8 buf[3]; - deb_i2c("i2c_write i2caddr %x, reg %x, len %d data ", i2caddr, - reg, len); - debug_dump(data, len, deb_i2c); - - for (i = 0; i < len; i++) { - buf[0] = i2caddr; - buf[1] = reg + (u8) i; - buf[2] = data[i]; - ret = - af9005_write_tuner_registers(d, - APO_REG_I2C_RW_SILICON_TUNER, - buf, 3); - if (ret) { - deb_i2c("i2c_write failed\n"); - return ret; - } - } - deb_i2c("i2c_write ok\n"); - return 0; -} - -static int af9005_i2c_read(struct dvb_usb_device *d, u8 i2caddr, u8 reg, - u8 * data, int len) -{ - int ret, i; - u8 temp; - deb_i2c("i2c_read i2caddr %x, reg %x, len %d\n ", i2caddr, reg, len); - for (i = 0; i < len; i++) { - temp = reg + i; - ret = - af9005_read_tuner_registers(d, - APO_REG_I2C_RW_SILICON_TUNER, - i2caddr, &temp, 1); - if (ret) { - deb_i2c("i2c_read failed\n"); - return ret; - } - data[i] = temp; - } - deb_i2c("i2c data read: "); - debug_dump(data, len, deb_i2c); - return 0; -} - -static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - /* only implements what the mt2060 module does, don't know how - to make it really generic */ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int ret; - u8 reg, addr; - u8 *value; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - if (num > 2) - warn("more than 2 i2c messages at a time is not handled yet. TODO."); - - if (num == 2) { - /* reads a single register */ - reg = *msg[0].buf; - addr = msg[0].addr; - value = msg[1].buf; - ret = af9005_i2c_read(d, addr, reg, value, 1); - if (ret == 0) - ret = 2; - } else { - /* write one or more registers */ - reg = msg[0].buf[0]; - addr = msg[0].addr; - value = &msg[0].buf[1]; - ret = af9005_i2c_write(d, addr, reg, value, msg[0].len - 1); - if (ret == 0) - ret = 1; - } - - mutex_unlock(&d->i2c_mutex); - return ret; -} - -static u32 af9005_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm af9005_i2c_algo = { - .master_xfer = af9005_i2c_xfer, - .functionality = af9005_i2c_func, -}; - -int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, - int wlen, u8 * rbuf, int rlen) -{ - struct af9005_device_state *st = d->priv; - - int ret, i, packet_len; - u8 buf[64]; - u8 ibuf[64]; - - if (wlen < 0) { - err("send command, wlen less than 0 bytes. Makes no sense."); - return -EINVAL; - } - if (wlen > 54) { - err("send command, wlen more than 54 bytes. Not supported."); - return -EINVAL; - } - if (rlen > 54) { - err("send command, rlen more than 54 bytes. Not supported."); - return -EINVAL; - } - packet_len = wlen + 5; - buf[0] = (u8) (packet_len & 0xff); - buf[1] = (u8) ((packet_len & 0xff00) >> 8); - - buf[2] = 0x26; /* packet type */ - buf[3] = wlen + 3; - buf[4] = st->sequence++; - buf[5] = command; - buf[6] = wlen; - for (i = 0; i < wlen; i++) - buf[7 + i] = wbuf[i]; - ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); - if (ret) - return ret; - if (ibuf[2] != 0x27) { - err("send command, wrong reply code."); - return -EIO; - } - if (ibuf[4] != buf[4]) { - err("send command, wrong sequence in reply."); - return -EIO; - } - if (ibuf[5] != 0x01) { - err("send command, wrong status code in reply."); - return -EIO; - } - if (ibuf[6] != rlen) { - err("send command, invalid data length in reply."); - return -EIO; - } - for (i = 0; i < rlen; i++) - rbuf[i] = ibuf[i + 7]; - return 0; -} - -int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, - int len) -{ - struct af9005_device_state *st = d->priv; - u8 obuf[16], ibuf[14]; - int ret, i; - - memset(obuf, 0, sizeof(obuf)); - memset(ibuf, 0, sizeof(ibuf)); - - obuf[0] = 14; /* length of rest of packet low */ - obuf[1] = 0; /* length of rest of packer high */ - - obuf[2] = 0x2a; /* read/write eeprom */ - - obuf[3] = 12; /* size */ - - obuf[4] = st->sequence++; - - obuf[5] = 0; /* read */ - - obuf[6] = len; - obuf[7] = address; - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); - if (ret) - return ret; - if (ibuf[2] != 0x2b) { - err("Read eeprom, invalid reply code"); - return -EIO; - } - if (ibuf[3] != 10) { - err("Read eeprom, invalid reply length"); - return -EIO; - } - if (ibuf[4] != obuf[4]) { - err("Read eeprom, wrong sequence in reply "); - return -EIO; - } - if (ibuf[5] != 1) { - err("Read eeprom, wrong status in reply "); - return -EIO; - } - for (i = 0; i < len; i++) { - values[i] = ibuf[6 + i]; - } - return 0; -} - -static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) -{ - u8 buf[FW_BULKOUT_SIZE + 2]; - u16 checksum; - int act_len, i, ret; - memset(buf, 0, sizeof(buf)); - buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); - buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); - switch (type) { - case FW_CONFIG: - buf[2] = 0x11; - buf[3] = 0x04; - buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ - buf[5] = 0x03; - checksum = buf[4] + buf[5]; - buf[6] = (u8) ((checksum >> 8) & 0xff); - buf[7] = (u8) (checksum & 0xff); - break; - case FW_CONFIRM: - buf[2] = 0x11; - buf[3] = 0x04; - buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ - buf[5] = 0x01; - checksum = buf[4] + buf[5]; - buf[6] = (u8) ((checksum >> 8) & 0xff); - buf[7] = (u8) (checksum & 0xff); - break; - case FW_BOOT: - buf[2] = 0x10; - buf[3] = 0x08; - buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ - buf[5] = 0x97; - buf[6] = 0xaa; - buf[7] = 0x55; - buf[8] = 0xa5; - buf[9] = 0x5a; - checksum = 0; - for (i = 4; i <= 9; i++) - checksum += buf[i]; - buf[10] = (u8) ((checksum >> 8) & 0xff); - buf[11] = (u8) (checksum & 0xff); - break; - default: - err("boot packet invalid boot packet type"); - return -EINVAL; - } - deb_fw(">>> "); - debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); - - ret = usb_bulk_msg(udev, - usb_sndbulkpipe(udev, 0x02), - buf, FW_BULKOUT_SIZE + 2, &act_len, 2000); - if (ret) - err("boot packet bulk message failed: %d (%d/%d)", ret, - FW_BULKOUT_SIZE + 2, act_len); - else - ret = act_len != FW_BULKOUT_SIZE + 2 ? -1 : 0; - if (ret) - return ret; - memset(buf, 0, 9); - ret = usb_bulk_msg(udev, - usb_rcvbulkpipe(udev, 0x01), buf, 9, &act_len, 2000); - if (ret) { - err("boot packet recv bulk message failed: %d", ret); - return ret; - } - deb_fw("<<< "); - debug_dump(buf, act_len, deb_fw); - checksum = 0; - switch (type) { - case FW_CONFIG: - if (buf[2] != 0x11) { - err("boot bad config header."); - return -EIO; - } - if (buf[3] != 0x05) { - err("boot bad config size."); - return -EIO; - } - if (buf[4] != 0x00) { - err("boot bad config sequence."); - return -EIO; - } - if (buf[5] != 0x04) { - err("boot bad config subtype."); - return -EIO; - } - for (i = 4; i <= 6; i++) - checksum += buf[i]; - if (buf[7] * 256 + buf[8] != checksum) { - err("boot bad config checksum."); - return -EIO; - } - *reply = buf[6]; - break; - case FW_CONFIRM: - if (buf[2] != 0x11) { - err("boot bad confirm header."); - return -EIO; - } - if (buf[3] != 0x05) { - err("boot bad confirm size."); - return -EIO; - } - if (buf[4] != 0x00) { - err("boot bad confirm sequence."); - return -EIO; - } - if (buf[5] != 0x02) { - err("boot bad confirm subtype."); - return -EIO; - } - for (i = 4; i <= 6; i++) - checksum += buf[i]; - if (buf[7] * 256 + buf[8] != checksum) { - err("boot bad confirm checksum."); - return -EIO; - } - *reply = buf[6]; - break; - case FW_BOOT: - if (buf[2] != 0x10) { - err("boot bad boot header."); - return -EIO; - } - if (buf[3] != 0x05) { - err("boot bad boot size."); - return -EIO; - } - if (buf[4] != 0x00) { - err("boot bad boot sequence."); - return -EIO; - } - if (buf[5] != 0x01) { - err("boot bad boot pattern 01."); - return -EIO; - } - if (buf[6] != 0x10) { - err("boot bad boot pattern 10."); - return -EIO; - } - for (i = 4; i <= 6; i++) - checksum += buf[i]; - if (buf[7] * 256 + buf[8] != checksum) { - err("boot bad boot checksum."); - return -EIO; - } - break; - - } - - return 0; -} - -static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) -{ - int i, packets, ret, act_len; - - u8 buf[FW_BULKOUT_SIZE + 2]; - u8 reply; - - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); - if (ret) - return ret; - if (reply != 0x01) { - err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); - return -EIO; - } - packets = fw->size / FW_BULKOUT_SIZE; - buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); - buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); - for (i = 0; i < packets; i++) { - memcpy(&buf[2], fw->data + i * FW_BULKOUT_SIZE, - FW_BULKOUT_SIZE); - deb_fw(">>> "); - debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); - ret = usb_bulk_msg(udev, - usb_sndbulkpipe(udev, 0x02), - buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); - if (ret) { - err("firmware download failed at packet %d with code %d", i, ret); - return ret; - } - } - ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); - if (ret) - return ret; - if (reply != (u8) (packets & 0xff)) { - err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); - return -EIO; - } - ret = af9005_boot_packet(udev, FW_BOOT, &reply); - if (ret) - return ret; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); - if (ret) - return ret; - if (reply != 0x02) { - err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); - return -EIO; - } - - return 0; - -} - -int af9005_led_control(struct dvb_usb_device *d, int onoff) -{ - struct af9005_device_state *st = d->priv; - int temp, ret; - - if (onoff && dvb_usb_af9005_led) - temp = 1; - else - temp = 0; - if (st->led_state != temp) { - ret = - af9005_write_register_bits(d, xd_p_reg_top_locken1, - reg_top_locken1_pos, - reg_top_locken1_len, temp); - if (ret) - return ret; - ret = - af9005_write_register_bits(d, xd_p_reg_top_lock1, - reg_top_lock1_pos, - reg_top_lock1_len, temp); - if (ret) - return ret; - st->led_state = temp; - } - return 0; -} - -static int af9005_frontend_attach(struct dvb_usb_adapter *adap) -{ - u8 buf[8]; - int i; - - /* without these calls the first commands after downloading - the firmware fail. I put these calls here to simulate - what it is done in dvb-usb-init.c. - */ - struct usb_device *udev = adap->dev->udev; - usb_clear_halt(udev, usb_sndbulkpipe(udev, 2)); - usb_clear_halt(udev, usb_rcvbulkpipe(udev, 1)); - if (dvb_usb_af9005_dump_eeprom) { - printk("EEPROM DUMP\n"); - for (i = 0; i < 255; i += 8) { - af9005_read_eeprom(adap->dev, i, buf, 8); - printk("ADDR %x ", i); - debug_dump(buf, 8, printk); - } - } - adap->fe_adap[0].fe = af9005_fe_attach(adap->dev); - return 0; -} - -static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) -{ - struct af9005_device_state *st = d->priv; - int ret, len; - - u8 obuf[5]; - u8 ibuf[256]; - - *state = REMOTE_NO_KEY_PRESSED; - if (rc_decode == NULL) { - /* it shouldn't never come here */ - return 0; - } - /* deb_info("rc_query\n"); */ - obuf[0] = 3; /* rest of packet length low */ - obuf[1] = 0; /* rest of packet lentgh high */ - obuf[2] = 0x40; /* read remote */ - obuf[3] = 1; /* rest of packet length */ - obuf[4] = st->sequence++; /* sequence number */ - ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); - if (ret) { - err("rc query failed"); - return ret; - } - if (ibuf[2] != 0x41) { - err("rc query bad header."); - return -EIO; - } - if (ibuf[4] != obuf[4]) { - err("rc query bad sequence."); - return -EIO; - } - len = ibuf[5]; - if (len > 246) { - err("rc query invalid length"); - return -EIO; - } - if (len > 0) { - deb_rc("rc data (%d) ", len); - debug_dump((ibuf + 6), len, deb_rc); - ret = rc_decode(d, &ibuf[6], len, event, state); - if (ret) { - err("rc_decode failed"); - return ret; - } else { - deb_rc("rc_decode state %x event %x\n", *state, *event); - if (*state == REMOTE_KEY_REPEAT) - *event = d->last_event; - } - } - return 0; -} - -static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - - return 0; -} - -static int af9005_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) -{ - int ret; - deb_info("pid filter control onoff %d\n", onoff); - if (onoff) { - ret = - af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); - if (ret) - return ret; - ret = - af9005_write_register_bits(adap->dev, - XD_MP2IF_DMX_CTRL, 1, 1, 1); - if (ret) - return ret; - ret = - af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); - } else - ret = - af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 0); - if (ret) - return ret; - deb_info("pid filter control ok\n"); - return 0; -} - -static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index, - u16 pid, int onoff) -{ - u8 cmd = index & 0x1f; - int ret; - deb_info("set pid filter, index %d, pid %x, onoff %d\n", index, - pid, onoff); - if (onoff) { - /* cannot use it as pid_filter_ctrl since it has to be done - before setting the first pid */ - if (adap->feedcount == 1) { - deb_info("first pid set, enable pid table\n"); - ret = af9005_pid_filter_control(adap, onoff); - if (ret) - return ret; - } - ret = - af9005_write_ofdm_register(adap->dev, - XD_MP2IF_PID_DATA_L, - (u8) (pid & 0xff)); - if (ret) - return ret; - ret = - af9005_write_ofdm_register(adap->dev, - XD_MP2IF_PID_DATA_H, - (u8) (pid >> 8)); - if (ret) - return ret; - cmd |= 0x20 | 0x40; - } else { - if (adap->feedcount == 0) { - deb_info("last pid unset, disable pid table\n"); - ret = af9005_pid_filter_control(adap, onoff); - if (ret) - return ret; - } - } - ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_IDX, cmd); - if (ret) - return ret; - deb_info("set pid ok\n"); - return 0; -} - -static int af9005_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - int ret; - u8 reply; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); - if (ret) - return ret; - deb_info("result of FW_CONFIG in identify state %d\n", reply); - if (reply == 0x01) - *cold = 1; - else if (reply == 0x02) - *cold = 0; - else - return -EIO; - deb_info("Identify state cold = %d\n", *cold); - return 0; -} - -static struct dvb_usb_device_properties af9005_properties; - -static int af9005_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - return dvb_usb_device_init(intf, &af9005_properties, - THIS_MODULE, NULL, adapter_nr); -} - -enum af9005_usb_table_entry { - AFATECH_AF9005, - TERRATEC_AF9005, - ANSONIC_AF9005, -}; - -static struct usb_device_id af9005_usb_table[] = { - [AFATECH_AF9005] = {USB_DEVICE(USB_VID_AFATECH, - USB_PID_AFATECH_AF9005)}, - [TERRATEC_AF9005] = {USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_T_USB_XE)}, - [ANSONIC_AF9005] = {USB_DEVICE(USB_VID_ANSONIC, - USB_PID_ANSONIC_DVBT_USB)}, - { } -}; - -MODULE_DEVICE_TABLE(usb, af9005_usb_table); - -static struct dvb_usb_device_properties af9005_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "af9005.fw", - .download_firmware = af9005_download_firmware, - .no_reconnect = 1, - - .size_of_priv = sizeof(struct af9005_device_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = - DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = af9005_pid_filter, - /* .pid_filter_ctrl = af9005_pid_filter_control, */ - .frontend_attach = af9005_frontend_attach, - /* .tuner_attach = af9005_tuner_attach, */ - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x04, - .u = { - .bulk = { - .buffersize = 4096, /* actual size seen is 3948 */ - } - } - }, - }}, - } - }, - .power_ctrl = af9005_power_ctrl, - .identify_state = af9005_identify_state, - - .i2c_algo = &af9005_i2c_algo, - - .rc.legacy = { - .rc_interval = 200, - .rc_map_table = NULL, - .rc_map_size = 0, - .rc_query = af9005_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 2, - .generic_bulk_ctrl_endpoint_response = 1, - - .num_device_descs = 3, - .devices = { - {.name = "Afatech DVB-T USB1.1 stick", - .cold_ids = {&af9005_usb_table[AFATECH_AF9005], NULL}, - .warm_ids = {NULL}, - }, - {.name = "TerraTec Cinergy T USB XE", - .cold_ids = {&af9005_usb_table[TERRATEC_AF9005], NULL}, - .warm_ids = {NULL}, - }, - {.name = "Ansonic DVB-T USB1.1 stick", - .cold_ids = {&af9005_usb_table[ANSONIC_AF9005], NULL}, - .warm_ids = {NULL}, - }, - {NULL}, - } -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver af9005_usb_driver = { - .name = "dvb_usb_af9005", - .probe = af9005_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = af9005_usb_table, -}; - -/* module stuff */ -static int __init af9005_usb_module_init(void) -{ - int result; - if ((result = usb_register(&af9005_usb_driver))) { - err("usb_register failed. (%d)", result); - return result; - } - rc_decode = symbol_request(af9005_rc_decode); - rc_keys = symbol_request(rc_map_af9005_table); - rc_keys_size = symbol_request(rc_map_af9005_table_size); - if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) { - err("af9005_rc_decode function not found, disabling remote"); - af9005_properties.rc.legacy.rc_query = NULL; - } else { - af9005_properties.rc.legacy.rc_map_table = rc_keys; - af9005_properties.rc.legacy.rc_map_size = *rc_keys_size; - } - - return 0; -} - -static void __exit af9005_usb_module_exit(void) -{ - /* release rc decode symbols */ - if (rc_decode != NULL) - symbol_put(af9005_rc_decode); - if (rc_keys != NULL) - symbol_put(rc_map_af9005_table); - if (rc_keys_size != NULL) - symbol_put(rc_map_af9005_table_size); - /* deregister this driver from the USB subsystem */ - usb_deregister(&af9005_usb_driver); -} - -module_init(af9005_usb_module_init); -module_exit(af9005_usb_module_exit); - -MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>"); -MODULE_DESCRIPTION("Driver for Afatech 9005 DVB-T USB1.1 stick"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/dvb/dvb-usb/af9005.h deleted file mode 100644 index 6a2bf3de8456..000000000000 --- a/drivers/media/dvb/dvb-usb/af9005.h +++ /dev/null @@ -1,3496 +0,0 @@ -/* Common header-file of the Linux driver for the Afatech 9005 - * USB1.1 DVB-T receiver. - * - * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) - * - * Thanks to Afatech who kindly provided information. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_AF9005_H_ -#define _DVB_USB_AF9005_H_ - -#define DVB_USB_LOG_PREFIX "af9005" -#include "dvb-usb.h" - -extern int dvb_usb_af9005_debug; -#define deb_info(args...) dprintk(dvb_usb_af9005_debug,0x01,args) -#define deb_xfer(args...) dprintk(dvb_usb_af9005_debug,0x02,args) -#define deb_rc(args...) dprintk(dvb_usb_af9005_debug,0x04,args) -#define deb_reg(args...) dprintk(dvb_usb_af9005_debug,0x08,args) -#define deb_i2c(args...) dprintk(dvb_usb_af9005_debug,0x10,args) -#define deb_fw(args...) dprintk(dvb_usb_af9005_debug,0x20,args) - -extern bool dvb_usb_af9005_led; - -/* firmware */ -#define FW_BULKOUT_SIZE 250 -enum { - FW_CONFIG, - FW_CONFIRM, - FW_BOOT -}; - -/* af9005 commands */ -#define AF9005_OFDM_REG 0 -#define AF9005_TUNER_REG 1 - -#define AF9005_REGISTER_RW 0x20 -#define AF9005_REGISTER_RW_ACK 0x21 - -#define AF9005_CMD_OFDM_REG 0x00 -#define AF9005_CMD_TUNER 0x80 -#define AF9005_CMD_BURST 0x02 -#define AF9005_CMD_AUTOINC 0x04 -#define AF9005_CMD_READ 0x00 -#define AF9005_CMD_WRITE 0x01 - -/* af9005 registers */ -#define APO_REG_RESET 0xAEFF - -#define APO_REG_I2C_RW_CAN_TUNER 0xF000 -#define APO_REG_I2C_RW_SILICON_TUNER 0xF001 -#define APO_REG_GPIO_RW_SILICON_TUNER 0xFFFE /* also for OFSM */ -#define APO_REG_TRIGGER_OFSM 0xFFFF /* also for OFSM */ - -/*********************************************************************** - * Apollo Registers from VLSI * - ***********************************************************************/ -#define xd_p_reg_aagc_inverted_agc 0xA000 -#define reg_aagc_inverted_agc_pos 0 -#define reg_aagc_inverted_agc_len 1 -#define reg_aagc_inverted_agc_lsb 0 -#define xd_p_reg_aagc_sign_only 0xA000 -#define reg_aagc_sign_only_pos 1 -#define reg_aagc_sign_only_len 1 -#define reg_aagc_sign_only_lsb 0 -#define xd_p_reg_aagc_slow_adc_en 0xA000 -#define reg_aagc_slow_adc_en_pos 2 -#define reg_aagc_slow_adc_en_len 1 -#define reg_aagc_slow_adc_en_lsb 0 -#define xd_p_reg_aagc_slow_adc_scale 0xA000 -#define reg_aagc_slow_adc_scale_pos 3 -#define reg_aagc_slow_adc_scale_len 5 -#define reg_aagc_slow_adc_scale_lsb 0 -#define xd_p_reg_aagc_check_slow_adc_lock 0xA001 -#define reg_aagc_check_slow_adc_lock_pos 0 -#define reg_aagc_check_slow_adc_lock_len 1 -#define reg_aagc_check_slow_adc_lock_lsb 0 -#define xd_p_reg_aagc_init_control 0xA001 -#define reg_aagc_init_control_pos 1 -#define reg_aagc_init_control_len 1 -#define reg_aagc_init_control_lsb 0 -#define xd_p_reg_aagc_total_gain_sel 0xA001 -#define reg_aagc_total_gain_sel_pos 2 -#define reg_aagc_total_gain_sel_len 2 -#define reg_aagc_total_gain_sel_lsb 0 -#define xd_p_reg_aagc_out_inv 0xA001 -#define reg_aagc_out_inv_pos 5 -#define reg_aagc_out_inv_len 1 -#define reg_aagc_out_inv_lsb 0 -#define xd_p_reg_aagc_int_en 0xA001 -#define reg_aagc_int_en_pos 6 -#define reg_aagc_int_en_len 1 -#define reg_aagc_int_en_lsb 0 -#define xd_p_reg_aagc_lock_change_flag 0xA001 -#define reg_aagc_lock_change_flag_pos 7 -#define reg_aagc_lock_change_flag_len 1 -#define reg_aagc_lock_change_flag_lsb 0 -#define xd_p_reg_aagc_rf_loop_bw_scale_acquire 0xA002 -#define reg_aagc_rf_loop_bw_scale_acquire_pos 0 -#define reg_aagc_rf_loop_bw_scale_acquire_len 5 -#define reg_aagc_rf_loop_bw_scale_acquire_lsb 0 -#define xd_p_reg_aagc_rf_loop_bw_scale_track 0xA003 -#define reg_aagc_rf_loop_bw_scale_track_pos 0 -#define reg_aagc_rf_loop_bw_scale_track_len 5 -#define reg_aagc_rf_loop_bw_scale_track_lsb 0 -#define xd_p_reg_aagc_if_loop_bw_scale_acquire 0xA004 -#define reg_aagc_if_loop_bw_scale_acquire_pos 0 -#define reg_aagc_if_loop_bw_scale_acquire_len 5 -#define reg_aagc_if_loop_bw_scale_acquire_lsb 0 -#define xd_p_reg_aagc_if_loop_bw_scale_track 0xA005 -#define reg_aagc_if_loop_bw_scale_track_pos 0 -#define reg_aagc_if_loop_bw_scale_track_len 5 -#define reg_aagc_if_loop_bw_scale_track_lsb 0 -#define xd_p_reg_aagc_max_rf_agc_7_0 0xA006 -#define reg_aagc_max_rf_agc_7_0_pos 0 -#define reg_aagc_max_rf_agc_7_0_len 8 -#define reg_aagc_max_rf_agc_7_0_lsb 0 -#define xd_p_reg_aagc_max_rf_agc_9_8 0xA007 -#define reg_aagc_max_rf_agc_9_8_pos 0 -#define reg_aagc_max_rf_agc_9_8_len 2 -#define reg_aagc_max_rf_agc_9_8_lsb 8 -#define xd_p_reg_aagc_min_rf_agc_7_0 0xA008 -#define reg_aagc_min_rf_agc_7_0_pos 0 -#define reg_aagc_min_rf_agc_7_0_len 8 -#define reg_aagc_min_rf_agc_7_0_lsb 0 -#define xd_p_reg_aagc_min_rf_agc_9_8 0xA009 -#define reg_aagc_min_rf_agc_9_8_pos 0 -#define reg_aagc_min_rf_agc_9_8_len 2 -#define reg_aagc_min_rf_agc_9_8_lsb 8 -#define xd_p_reg_aagc_max_if_agc_7_0 0xA00A -#define reg_aagc_max_if_agc_7_0_pos 0 -#define reg_aagc_max_if_agc_7_0_len 8 -#define reg_aagc_max_if_agc_7_0_lsb 0 -#define xd_p_reg_aagc_max_if_agc_9_8 0xA00B -#define reg_aagc_max_if_agc_9_8_pos 0 -#define reg_aagc_max_if_agc_9_8_len 2 -#define reg_aagc_max_if_agc_9_8_lsb 8 -#define xd_p_reg_aagc_min_if_agc_7_0 0xA00C -#define reg_aagc_min_if_agc_7_0_pos 0 -#define reg_aagc_min_if_agc_7_0_len 8 -#define reg_aagc_min_if_agc_7_0_lsb 0 -#define xd_p_reg_aagc_min_if_agc_9_8 0xA00D -#define reg_aagc_min_if_agc_9_8_pos 0 -#define reg_aagc_min_if_agc_9_8_len 2 -#define reg_aagc_min_if_agc_9_8_lsb 8 -#define xd_p_reg_aagc_lock_sample_scale 0xA00E -#define reg_aagc_lock_sample_scale_pos 0 -#define reg_aagc_lock_sample_scale_len 5 -#define reg_aagc_lock_sample_scale_lsb 0 -#define xd_p_reg_aagc_rf_agc_lock_scale_acquire 0xA00F -#define reg_aagc_rf_agc_lock_scale_acquire_pos 0 -#define reg_aagc_rf_agc_lock_scale_acquire_len 3 -#define reg_aagc_rf_agc_lock_scale_acquire_lsb 0 -#define xd_p_reg_aagc_rf_agc_lock_scale_track 0xA00F -#define reg_aagc_rf_agc_lock_scale_track_pos 3 -#define reg_aagc_rf_agc_lock_scale_track_len 3 -#define reg_aagc_rf_agc_lock_scale_track_lsb 0 -#define xd_p_reg_aagc_if_agc_lock_scale_acquire 0xA010 -#define reg_aagc_if_agc_lock_scale_acquire_pos 0 -#define reg_aagc_if_agc_lock_scale_acquire_len 3 -#define reg_aagc_if_agc_lock_scale_acquire_lsb 0 -#define xd_p_reg_aagc_if_agc_lock_scale_track 0xA010 -#define reg_aagc_if_agc_lock_scale_track_pos 3 -#define reg_aagc_if_agc_lock_scale_track_len 3 -#define reg_aagc_if_agc_lock_scale_track_lsb 0 -#define xd_p_reg_aagc_rf_top_numerator_7_0 0xA011 -#define reg_aagc_rf_top_numerator_7_0_pos 0 -#define reg_aagc_rf_top_numerator_7_0_len 8 -#define reg_aagc_rf_top_numerator_7_0_lsb 0 -#define xd_p_reg_aagc_rf_top_numerator_9_8 0xA012 -#define reg_aagc_rf_top_numerator_9_8_pos 0 -#define reg_aagc_rf_top_numerator_9_8_len 2 -#define reg_aagc_rf_top_numerator_9_8_lsb 8 -#define xd_p_reg_aagc_if_top_numerator_7_0 0xA013 -#define reg_aagc_if_top_numerator_7_0_pos 0 -#define reg_aagc_if_top_numerator_7_0_len 8 -#define reg_aagc_if_top_numerator_7_0_lsb 0 -#define xd_p_reg_aagc_if_top_numerator_9_8 0xA014 -#define reg_aagc_if_top_numerator_9_8_pos 0 -#define reg_aagc_if_top_numerator_9_8_len 2 -#define reg_aagc_if_top_numerator_9_8_lsb 8 -#define xd_p_reg_aagc_adc_out_desired_7_0 0xA015 -#define reg_aagc_adc_out_desired_7_0_pos 0 -#define reg_aagc_adc_out_desired_7_0_len 8 -#define reg_aagc_adc_out_desired_7_0_lsb 0 -#define xd_p_reg_aagc_adc_out_desired_8 0xA016 -#define reg_aagc_adc_out_desired_8_pos 0 -#define reg_aagc_adc_out_desired_8_len 1 -#define reg_aagc_adc_out_desired_8_lsb 0 -#define xd_p_reg_aagc_fixed_gain 0xA016 -#define reg_aagc_fixed_gain_pos 3 -#define reg_aagc_fixed_gain_len 1 -#define reg_aagc_fixed_gain_lsb 0 -#define xd_p_reg_aagc_lock_count_th 0xA016 -#define reg_aagc_lock_count_th_pos 4 -#define reg_aagc_lock_count_th_len 4 -#define reg_aagc_lock_count_th_lsb 0 -#define xd_p_reg_aagc_fixed_rf_agc_control_7_0 0xA017 -#define reg_aagc_fixed_rf_agc_control_7_0_pos 0 -#define reg_aagc_fixed_rf_agc_control_7_0_len 8 -#define reg_aagc_fixed_rf_agc_control_7_0_lsb 0 -#define xd_p_reg_aagc_fixed_rf_agc_control_15_8 0xA018 -#define reg_aagc_fixed_rf_agc_control_15_8_pos 0 -#define reg_aagc_fixed_rf_agc_control_15_8_len 8 -#define reg_aagc_fixed_rf_agc_control_15_8_lsb 8 -#define xd_p_reg_aagc_fixed_rf_agc_control_23_16 0xA019 -#define reg_aagc_fixed_rf_agc_control_23_16_pos 0 -#define reg_aagc_fixed_rf_agc_control_23_16_len 8 -#define reg_aagc_fixed_rf_agc_control_23_16_lsb 16 -#define xd_p_reg_aagc_fixed_rf_agc_control_30_24 0xA01A -#define reg_aagc_fixed_rf_agc_control_30_24_pos 0 -#define reg_aagc_fixed_rf_agc_control_30_24_len 7 -#define reg_aagc_fixed_rf_agc_control_30_24_lsb 24 -#define xd_p_reg_aagc_fixed_if_agc_control_7_0 0xA01B -#define reg_aagc_fixed_if_agc_control_7_0_pos 0 -#define reg_aagc_fixed_if_agc_control_7_0_len 8 -#define reg_aagc_fixed_if_agc_control_7_0_lsb 0 -#define xd_p_reg_aagc_fixed_if_agc_control_15_8 0xA01C -#define reg_aagc_fixed_if_agc_control_15_8_pos 0 -#define reg_aagc_fixed_if_agc_control_15_8_len 8 -#define reg_aagc_fixed_if_agc_control_15_8_lsb 8 -#define xd_p_reg_aagc_fixed_if_agc_control_23_16 0xA01D -#define reg_aagc_fixed_if_agc_control_23_16_pos 0 -#define reg_aagc_fixed_if_agc_control_23_16_len 8 -#define reg_aagc_fixed_if_agc_control_23_16_lsb 16 -#define xd_p_reg_aagc_fixed_if_agc_control_30_24 0xA01E -#define reg_aagc_fixed_if_agc_control_30_24_pos 0 -#define reg_aagc_fixed_if_agc_control_30_24_len 7 -#define reg_aagc_fixed_if_agc_control_30_24_lsb 24 -#define xd_p_reg_aagc_rf_agc_unlock_numerator 0xA01F -#define reg_aagc_rf_agc_unlock_numerator_pos 0 -#define reg_aagc_rf_agc_unlock_numerator_len 6 -#define reg_aagc_rf_agc_unlock_numerator_lsb 0 -#define xd_p_reg_aagc_if_agc_unlock_numerator 0xA020 -#define reg_aagc_if_agc_unlock_numerator_pos 0 -#define reg_aagc_if_agc_unlock_numerator_len 6 -#define reg_aagc_if_agc_unlock_numerator_lsb 0 -#define xd_p_reg_unplug_th 0xA021 -#define reg_unplug_th_pos 0 -#define reg_unplug_th_len 8 -#define reg_aagc_rf_x0_lsb 0 -#define xd_p_reg_weak_signal_rfagc_thr 0xA022 -#define reg_weak_signal_rfagc_thr_pos 0 -#define reg_weak_signal_rfagc_thr_len 8 -#define reg_weak_signal_rfagc_thr_lsb 0 -#define xd_p_reg_unplug_rf_gain_th 0xA023 -#define reg_unplug_rf_gain_th_pos 0 -#define reg_unplug_rf_gain_th_len 8 -#define reg_unplug_rf_gain_th_lsb 0 -#define xd_p_reg_unplug_dtop_rf_gain_th 0xA024 -#define reg_unplug_dtop_rf_gain_th_pos 0 -#define reg_unplug_dtop_rf_gain_th_len 8 -#define reg_unplug_dtop_rf_gain_th_lsb 0 -#define xd_p_reg_unplug_dtop_if_gain_th 0xA025 -#define reg_unplug_dtop_if_gain_th_pos 0 -#define reg_unplug_dtop_if_gain_th_len 8 -#define reg_unplug_dtop_if_gain_th_lsb 0 -#define xd_p_reg_top_recover_at_unplug_en 0xA026 -#define reg_top_recover_at_unplug_en_pos 0 -#define reg_top_recover_at_unplug_en_len 1 -#define reg_top_recover_at_unplug_en_lsb 0 -#define xd_p_reg_aagc_rf_x6 0xA027 -#define reg_aagc_rf_x6_pos 0 -#define reg_aagc_rf_x6_len 8 -#define reg_aagc_rf_x6_lsb 0 -#define xd_p_reg_aagc_rf_x7 0xA028 -#define reg_aagc_rf_x7_pos 0 -#define reg_aagc_rf_x7_len 8 -#define reg_aagc_rf_x7_lsb 0 -#define xd_p_reg_aagc_rf_x8 0xA029 -#define reg_aagc_rf_x8_pos 0 -#define reg_aagc_rf_x8_len 8 -#define reg_aagc_rf_x8_lsb 0 -#define xd_p_reg_aagc_rf_x9 0xA02A -#define reg_aagc_rf_x9_pos 0 -#define reg_aagc_rf_x9_len 8 -#define reg_aagc_rf_x9_lsb 0 -#define xd_p_reg_aagc_rf_x10 0xA02B -#define reg_aagc_rf_x10_pos 0 -#define reg_aagc_rf_x10_len 8 -#define reg_aagc_rf_x10_lsb 0 -#define xd_p_reg_aagc_rf_x11 0xA02C -#define reg_aagc_rf_x11_pos 0 -#define reg_aagc_rf_x11_len 8 -#define reg_aagc_rf_x11_lsb 0 -#define xd_p_reg_aagc_rf_x12 0xA02D -#define reg_aagc_rf_x12_pos 0 -#define reg_aagc_rf_x12_len 8 -#define reg_aagc_rf_x12_lsb 0 -#define xd_p_reg_aagc_rf_x13 0xA02E -#define reg_aagc_rf_x13_pos 0 -#define reg_aagc_rf_x13_len 8 -#define reg_aagc_rf_x13_lsb 0 -#define xd_p_reg_aagc_if_x0 0xA02F -#define reg_aagc_if_x0_pos 0 -#define reg_aagc_if_x0_len 8 -#define reg_aagc_if_x0_lsb 0 -#define xd_p_reg_aagc_if_x1 0xA030 -#define reg_aagc_if_x1_pos 0 -#define reg_aagc_if_x1_len 8 -#define reg_aagc_if_x1_lsb 0 -#define xd_p_reg_aagc_if_x2 0xA031 -#define reg_aagc_if_x2_pos 0 -#define reg_aagc_if_x2_len 8 -#define reg_aagc_if_x2_lsb 0 -#define xd_p_reg_aagc_if_x3 0xA032 -#define reg_aagc_if_x3_pos 0 -#define reg_aagc_if_x3_len 8 -#define reg_aagc_if_x3_lsb 0 -#define xd_p_reg_aagc_if_x4 0xA033 -#define reg_aagc_if_x4_pos 0 -#define reg_aagc_if_x4_len 8 -#define reg_aagc_if_x4_lsb 0 -#define xd_p_reg_aagc_if_x5 0xA034 -#define reg_aagc_if_x5_pos 0 -#define reg_aagc_if_x5_len 8 -#define reg_aagc_if_x5_lsb 0 -#define xd_p_reg_aagc_if_x6 0xA035 -#define reg_aagc_if_x6_pos 0 -#define reg_aagc_if_x6_len 8 -#define reg_aagc_if_x6_lsb 0 -#define xd_p_reg_aagc_if_x7 0xA036 -#define reg_aagc_if_x7_pos 0 -#define reg_aagc_if_x7_len 8 -#define reg_aagc_if_x7_lsb 0 -#define xd_p_reg_aagc_if_x8 0xA037 -#define reg_aagc_if_x8_pos 0 -#define reg_aagc_if_x8_len 8 -#define reg_aagc_if_x8_lsb 0 -#define xd_p_reg_aagc_if_x9 0xA038 -#define reg_aagc_if_x9_pos 0 -#define reg_aagc_if_x9_len 8 -#define reg_aagc_if_x9_lsb 0 -#define xd_p_reg_aagc_if_x10 0xA039 -#define reg_aagc_if_x10_pos 0 -#define reg_aagc_if_x10_len 8 -#define reg_aagc_if_x10_lsb 0 -#define xd_p_reg_aagc_if_x11 0xA03A -#define reg_aagc_if_x11_pos 0 -#define reg_aagc_if_x11_len 8 -#define reg_aagc_if_x11_lsb 0 -#define xd_p_reg_aagc_if_x12 0xA03B -#define reg_aagc_if_x12_pos 0 -#define reg_aagc_if_x12_len 8 -#define reg_aagc_if_x12_lsb 0 -#define xd_p_reg_aagc_if_x13 0xA03C -#define reg_aagc_if_x13_pos 0 -#define reg_aagc_if_x13_len 8 -#define reg_aagc_if_x13_lsb 0 -#define xd_p_reg_aagc_min_rf_ctl_8bit_for_dca 0xA03D -#define reg_aagc_min_rf_ctl_8bit_for_dca_pos 0 -#define reg_aagc_min_rf_ctl_8bit_for_dca_len 8 -#define reg_aagc_min_rf_ctl_8bit_for_dca_lsb 0 -#define xd_p_reg_aagc_min_if_ctl_8bit_for_dca 0xA03E -#define reg_aagc_min_if_ctl_8bit_for_dca_pos 0 -#define reg_aagc_min_if_ctl_8bit_for_dca_len 8 -#define reg_aagc_min_if_ctl_8bit_for_dca_lsb 0 -#define xd_r_reg_aagc_total_gain_7_0 0xA070 -#define reg_aagc_total_gain_7_0_pos 0 -#define reg_aagc_total_gain_7_0_len 8 -#define reg_aagc_total_gain_7_0_lsb 0 -#define xd_r_reg_aagc_total_gain_15_8 0xA071 -#define reg_aagc_total_gain_15_8_pos 0 -#define reg_aagc_total_gain_15_8_len 8 -#define reg_aagc_total_gain_15_8_lsb 8 -#define xd_p_reg_aagc_in_sat_cnt_7_0 0xA074 -#define reg_aagc_in_sat_cnt_7_0_pos 0 -#define reg_aagc_in_sat_cnt_7_0_len 8 -#define reg_aagc_in_sat_cnt_7_0_lsb 0 -#define xd_p_reg_aagc_in_sat_cnt_15_8 0xA075 -#define reg_aagc_in_sat_cnt_15_8_pos 0 -#define reg_aagc_in_sat_cnt_15_8_len 8 -#define reg_aagc_in_sat_cnt_15_8_lsb 8 -#define xd_p_reg_aagc_in_sat_cnt_23_16 0xA076 -#define reg_aagc_in_sat_cnt_23_16_pos 0 -#define reg_aagc_in_sat_cnt_23_16_len 8 -#define reg_aagc_in_sat_cnt_23_16_lsb 16 -#define xd_p_reg_aagc_in_sat_cnt_31_24 0xA077 -#define reg_aagc_in_sat_cnt_31_24_pos 0 -#define reg_aagc_in_sat_cnt_31_24_len 8 -#define reg_aagc_in_sat_cnt_31_24_lsb 24 -#define xd_r_reg_aagc_digital_rf_volt_7_0 0xA078 -#define reg_aagc_digital_rf_volt_7_0_pos 0 -#define reg_aagc_digital_rf_volt_7_0_len 8 -#define reg_aagc_digital_rf_volt_7_0_lsb 0 -#define xd_r_reg_aagc_digital_rf_volt_9_8 0xA079 -#define reg_aagc_digital_rf_volt_9_8_pos 0 -#define reg_aagc_digital_rf_volt_9_8_len 2 -#define reg_aagc_digital_rf_volt_9_8_lsb 8 -#define xd_r_reg_aagc_digital_if_volt_7_0 0xA07A -#define reg_aagc_digital_if_volt_7_0_pos 0 -#define reg_aagc_digital_if_volt_7_0_len 8 -#define reg_aagc_digital_if_volt_7_0_lsb 0 -#define xd_r_reg_aagc_digital_if_volt_9_8 0xA07B -#define reg_aagc_digital_if_volt_9_8_pos 0 -#define reg_aagc_digital_if_volt_9_8_len 2 -#define reg_aagc_digital_if_volt_9_8_lsb 8 -#define xd_r_reg_aagc_rf_gain 0xA07C -#define reg_aagc_rf_gain_pos 0 -#define reg_aagc_rf_gain_len 8 -#define reg_aagc_rf_gain_lsb 0 -#define xd_r_reg_aagc_if_gain 0xA07D -#define reg_aagc_if_gain_pos 0 -#define reg_aagc_if_gain_len 8 -#define reg_aagc_if_gain_lsb 0 -#define xd_p_tinr_imp_indicator 0xA080 -#define tinr_imp_indicator_pos 0 -#define tinr_imp_indicator_len 2 -#define tinr_imp_indicator_lsb 0 -#define xd_p_reg_tinr_fifo_size 0xA080 -#define reg_tinr_fifo_size_pos 2 -#define reg_tinr_fifo_size_len 5 -#define reg_tinr_fifo_size_lsb 0 -#define xd_p_reg_tinr_saturation_cnt_th 0xA081 -#define reg_tinr_saturation_cnt_th_pos 0 -#define reg_tinr_saturation_cnt_th_len 4 -#define reg_tinr_saturation_cnt_th_lsb 0 -#define xd_p_reg_tinr_saturation_th_3_0 0xA081 -#define reg_tinr_saturation_th_3_0_pos 4 -#define reg_tinr_saturation_th_3_0_len 4 -#define reg_tinr_saturation_th_3_0_lsb 0 -#define xd_p_reg_tinr_saturation_th_8_4 0xA082 -#define reg_tinr_saturation_th_8_4_pos 0 -#define reg_tinr_saturation_th_8_4_len 5 -#define reg_tinr_saturation_th_8_4_lsb 4 -#define xd_p_reg_tinr_imp_duration_th_2k_7_0 0xA083 -#define reg_tinr_imp_duration_th_2k_7_0_pos 0 -#define reg_tinr_imp_duration_th_2k_7_0_len 8 -#define reg_tinr_imp_duration_th_2k_7_0_lsb 0 -#define xd_p_reg_tinr_imp_duration_th_2k_8 0xA084 -#define reg_tinr_imp_duration_th_2k_8_pos 0 -#define reg_tinr_imp_duration_th_2k_8_len 1 -#define reg_tinr_imp_duration_th_2k_8_lsb 0 -#define xd_p_reg_tinr_imp_duration_th_8k_7_0 0xA085 -#define reg_tinr_imp_duration_th_8k_7_0_pos 0 -#define reg_tinr_imp_duration_th_8k_7_0_len 8 -#define reg_tinr_imp_duration_th_8k_7_0_lsb 0 -#define xd_p_reg_tinr_imp_duration_th_8k_10_8 0xA086 -#define reg_tinr_imp_duration_th_8k_10_8_pos 0 -#define reg_tinr_imp_duration_th_8k_10_8_len 3 -#define reg_tinr_imp_duration_th_8k_10_8_lsb 8 -#define xd_p_reg_tinr_freq_ratio_6m_7_0 0xA087 -#define reg_tinr_freq_ratio_6m_7_0_pos 0 -#define reg_tinr_freq_ratio_6m_7_0_len 8 -#define reg_tinr_freq_ratio_6m_7_0_lsb 0 -#define xd_p_reg_tinr_freq_ratio_6m_12_8 0xA088 -#define reg_tinr_freq_ratio_6m_12_8_pos 0 -#define reg_tinr_freq_ratio_6m_12_8_len 5 -#define reg_tinr_freq_ratio_6m_12_8_lsb 8 -#define xd_p_reg_tinr_freq_ratio_7m_7_0 0xA089 -#define reg_tinr_freq_ratio_7m_7_0_pos 0 -#define reg_tinr_freq_ratio_7m_7_0_len 8 -#define reg_tinr_freq_ratio_7m_7_0_lsb 0 -#define xd_p_reg_tinr_freq_ratio_7m_12_8 0xA08A -#define reg_tinr_freq_ratio_7m_12_8_pos 0 -#define reg_tinr_freq_ratio_7m_12_8_len 5 -#define reg_tinr_freq_ratio_7m_12_8_lsb 8 -#define xd_p_reg_tinr_freq_ratio_8m_7_0 0xA08B -#define reg_tinr_freq_ratio_8m_7_0_pos 0 -#define reg_tinr_freq_ratio_8m_7_0_len 8 -#define reg_tinr_freq_ratio_8m_7_0_lsb 0 -#define xd_p_reg_tinr_freq_ratio_8m_12_8 0xA08C -#define reg_tinr_freq_ratio_8m_12_8_pos 0 -#define reg_tinr_freq_ratio_8m_12_8_len 5 -#define reg_tinr_freq_ratio_8m_12_8_lsb 8 -#define xd_p_reg_tinr_imp_duration_th_low_2k 0xA08D -#define reg_tinr_imp_duration_th_low_2k_pos 0 -#define reg_tinr_imp_duration_th_low_2k_len 8 -#define reg_tinr_imp_duration_th_low_2k_lsb 0 -#define xd_p_reg_tinr_imp_duration_th_low_8k 0xA08E -#define reg_tinr_imp_duration_th_low_8k_pos 0 -#define reg_tinr_imp_duration_th_low_8k_len 8 -#define reg_tinr_imp_duration_th_low_8k_lsb 0 -#define xd_r_reg_tinr_counter_7_0 0xA090 -#define reg_tinr_counter_7_0_pos 0 -#define reg_tinr_counter_7_0_len 8 -#define reg_tinr_counter_7_0_lsb 0 -#define xd_r_reg_tinr_counter_15_8 0xA091 -#define reg_tinr_counter_15_8_pos 0 -#define reg_tinr_counter_15_8_len 8 -#define reg_tinr_counter_15_8_lsb 8 -#define xd_p_reg_tinr_adative_tinr_en 0xA093 -#define reg_tinr_adative_tinr_en_pos 0 -#define reg_tinr_adative_tinr_en_len 1 -#define reg_tinr_adative_tinr_en_lsb 0 -#define xd_p_reg_tinr_peak_fifo_size 0xA093 -#define reg_tinr_peak_fifo_size_pos 1 -#define reg_tinr_peak_fifo_size_len 5 -#define reg_tinr_peak_fifo_size_lsb 0 -#define xd_p_reg_tinr_counter_rst 0xA093 -#define reg_tinr_counter_rst_pos 6 -#define reg_tinr_counter_rst_len 1 -#define reg_tinr_counter_rst_lsb 0 -#define xd_p_reg_tinr_search_period_7_0 0xA094 -#define reg_tinr_search_period_7_0_pos 0 -#define reg_tinr_search_period_7_0_len 8 -#define reg_tinr_search_period_7_0_lsb 0 -#define xd_p_reg_tinr_search_period_15_8 0xA095 -#define reg_tinr_search_period_15_8_pos 0 -#define reg_tinr_search_period_15_8_len 8 -#define reg_tinr_search_period_15_8_lsb 8 -#define xd_p_reg_ccifs_fcw_7_0 0xA0A0 -#define reg_ccifs_fcw_7_0_pos 0 -#define reg_ccifs_fcw_7_0_len 8 -#define reg_ccifs_fcw_7_0_lsb 0 -#define xd_p_reg_ccifs_fcw_12_8 0xA0A1 -#define reg_ccifs_fcw_12_8_pos 0 -#define reg_ccifs_fcw_12_8_len 5 -#define reg_ccifs_fcw_12_8_lsb 8 -#define xd_p_reg_ccifs_spec_inv 0xA0A1 -#define reg_ccifs_spec_inv_pos 5 -#define reg_ccifs_spec_inv_len 1 -#define reg_ccifs_spec_inv_lsb 0 -#define xd_p_reg_gp_trigger 0xA0A2 -#define reg_gp_trigger_pos 0 -#define reg_gp_trigger_len 1 -#define reg_gp_trigger_lsb 0 -#define xd_p_reg_trigger_sel 0xA0A2 -#define reg_trigger_sel_pos 1 -#define reg_trigger_sel_len 2 -#define reg_trigger_sel_lsb 0 -#define xd_p_reg_debug_ofdm 0xA0A2 -#define reg_debug_ofdm_pos 3 -#define reg_debug_ofdm_len 2 -#define reg_debug_ofdm_lsb 0 -#define xd_p_reg_trigger_module_sel 0xA0A3 -#define reg_trigger_module_sel_pos 0 -#define reg_trigger_module_sel_len 6 -#define reg_trigger_module_sel_lsb 0 -#define xd_p_reg_trigger_set_sel 0xA0A4 -#define reg_trigger_set_sel_pos 0 -#define reg_trigger_set_sel_len 6 -#define reg_trigger_set_sel_lsb 0 -#define xd_p_reg_fw_int_mask_n 0xA0A4 -#define reg_fw_int_mask_n_pos 6 -#define reg_fw_int_mask_n_len 1 -#define reg_fw_int_mask_n_lsb 0 -#define xd_p_reg_debug_group 0xA0A5 -#define reg_debug_group_pos 0 -#define reg_debug_group_len 4 -#define reg_debug_group_lsb 0 -#define xd_p_reg_odbg_clk_sel 0xA0A5 -#define reg_odbg_clk_sel_pos 4 -#define reg_odbg_clk_sel_len 2 -#define reg_odbg_clk_sel_lsb 0 -#define xd_p_reg_ccif_sc 0xA0C0 -#define reg_ccif_sc_pos 0 -#define reg_ccif_sc_len 4 -#define reg_ccif_sc_lsb 0 -#define xd_r_reg_ccif_saturate 0xA0C1 -#define reg_ccif_saturate_pos 0 -#define reg_ccif_saturate_len 2 -#define reg_ccif_saturate_lsb 0 -#define xd_r_reg_antif_saturate 0xA0C1 -#define reg_antif_saturate_pos 2 -#define reg_antif_saturate_len 4 -#define reg_antif_saturate_lsb 0 -#define xd_r_reg_acif_saturate 0xA0C2 -#define reg_acif_saturate_pos 0 -#define reg_acif_saturate_len 8 -#define reg_acif_saturate_lsb 0 -#define xd_p_reg_tmr_timer0_threshold_7_0 0xA0C8 -#define reg_tmr_timer0_threshold_7_0_pos 0 -#define reg_tmr_timer0_threshold_7_0_len 8 -#define reg_tmr_timer0_threshold_7_0_lsb 0 -#define xd_p_reg_tmr_timer0_threshold_15_8 0xA0C9 -#define reg_tmr_timer0_threshold_15_8_pos 0 -#define reg_tmr_timer0_threshold_15_8_len 8 -#define reg_tmr_timer0_threshold_15_8_lsb 8 -#define xd_p_reg_tmr_timer0_enable 0xA0CA -#define reg_tmr_timer0_enable_pos 0 -#define reg_tmr_timer0_enable_len 1 -#define reg_tmr_timer0_enable_lsb 0 -#define xd_p_reg_tmr_timer0_clk_sel 0xA0CA -#define reg_tmr_timer0_clk_sel_pos 1 -#define reg_tmr_timer0_clk_sel_len 1 -#define reg_tmr_timer0_clk_sel_lsb 0 -#define xd_p_reg_tmr_timer0_int 0xA0CA -#define reg_tmr_timer0_int_pos 2 -#define reg_tmr_timer0_int_len 1 -#define reg_tmr_timer0_int_lsb 0 -#define xd_p_reg_tmr_timer0_rst 0xA0CA -#define reg_tmr_timer0_rst_pos 3 -#define reg_tmr_timer0_rst_len 1 -#define reg_tmr_timer0_rst_lsb 0 -#define xd_r_reg_tmr_timer0_count_7_0 0xA0CB -#define reg_tmr_timer0_count_7_0_pos 0 -#define reg_tmr_timer0_count_7_0_len 8 -#define reg_tmr_timer0_count_7_0_lsb 0 -#define xd_r_reg_tmr_timer0_count_15_8 0xA0CC -#define reg_tmr_timer0_count_15_8_pos 0 -#define reg_tmr_timer0_count_15_8_len 8 -#define reg_tmr_timer0_count_15_8_lsb 8 -#define xd_p_reg_suspend 0xA0CD -#define reg_suspend_pos 0 -#define reg_suspend_len 1 -#define reg_suspend_lsb 0 -#define xd_p_reg_suspend_rdy 0xA0CD -#define reg_suspend_rdy_pos 1 -#define reg_suspend_rdy_len 1 -#define reg_suspend_rdy_lsb 0 -#define xd_p_reg_resume 0xA0CD -#define reg_resume_pos 2 -#define reg_resume_len 1 -#define reg_resume_lsb 0 -#define xd_p_reg_resume_rdy 0xA0CD -#define reg_resume_rdy_pos 3 -#define reg_resume_rdy_len 1 -#define reg_resume_rdy_lsb 0 -#define xd_p_reg_fmf 0xA0CE -#define reg_fmf_pos 0 -#define reg_fmf_len 8 -#define reg_fmf_lsb 0 -#define xd_p_ccid_accumulate_num_2k_7_0 0xA100 -#define ccid_accumulate_num_2k_7_0_pos 0 -#define ccid_accumulate_num_2k_7_0_len 8 -#define ccid_accumulate_num_2k_7_0_lsb 0 -#define xd_p_ccid_accumulate_num_2k_12_8 0xA101 -#define ccid_accumulate_num_2k_12_8_pos 0 -#define ccid_accumulate_num_2k_12_8_len 5 -#define ccid_accumulate_num_2k_12_8_lsb 8 -#define xd_p_ccid_accumulate_num_8k_7_0 0xA102 -#define ccid_accumulate_num_8k_7_0_pos 0 -#define ccid_accumulate_num_8k_7_0_len 8 -#define ccid_accumulate_num_8k_7_0_lsb 0 -#define xd_p_ccid_accumulate_num_8k_14_8 0xA103 -#define ccid_accumulate_num_8k_14_8_pos 0 -#define ccid_accumulate_num_8k_14_8_len 7 -#define ccid_accumulate_num_8k_14_8_lsb 8 -#define xd_p_ccid_desired_level_0 0xA103 -#define ccid_desired_level_0_pos 7 -#define ccid_desired_level_0_len 1 -#define ccid_desired_level_0_lsb 0 -#define xd_p_ccid_desired_level_8_1 0xA104 -#define ccid_desired_level_8_1_pos 0 -#define ccid_desired_level_8_1_len 8 -#define ccid_desired_level_8_1_lsb 1 -#define xd_p_ccid_apply_delay 0xA105 -#define ccid_apply_delay_pos 0 -#define ccid_apply_delay_len 7 -#define ccid_apply_delay_lsb 0 -#define xd_p_ccid_CCID_Threshold1 0xA106 -#define ccid_CCID_Threshold1_pos 0 -#define ccid_CCID_Threshold1_len 8 -#define ccid_CCID_Threshold1_lsb 0 -#define xd_p_ccid_CCID_Threshold2 0xA107 -#define ccid_CCID_Threshold2_pos 0 -#define ccid_CCID_Threshold2_len 8 -#define ccid_CCID_Threshold2_lsb 0 -#define xd_p_reg_ccid_gain_scale 0xA108 -#define reg_ccid_gain_scale_pos 0 -#define reg_ccid_gain_scale_len 4 -#define reg_ccid_gain_scale_lsb 0 -#define xd_p_reg_ccid2_passband_gain_set 0xA108 -#define reg_ccid2_passband_gain_set_pos 4 -#define reg_ccid2_passband_gain_set_len 4 -#define reg_ccid2_passband_gain_set_lsb 0 -#define xd_r_ccid_multiplier_7_0 0xA109 -#define ccid_multiplier_7_0_pos 0 -#define ccid_multiplier_7_0_len 8 -#define ccid_multiplier_7_0_lsb 0 -#define xd_r_ccid_multiplier_15_8 0xA10A -#define ccid_multiplier_15_8_pos 0 -#define ccid_multiplier_15_8_len 8 -#define ccid_multiplier_15_8_lsb 8 -#define xd_r_ccid_right_shift_bits 0xA10B -#define ccid_right_shift_bits_pos 0 -#define ccid_right_shift_bits_len 4 -#define ccid_right_shift_bits_lsb 0 -#define xd_r_reg_ccid_sx_7_0 0xA10C -#define reg_ccid_sx_7_0_pos 0 -#define reg_ccid_sx_7_0_len 8 -#define reg_ccid_sx_7_0_lsb 0 -#define xd_r_reg_ccid_sx_15_8 0xA10D -#define reg_ccid_sx_15_8_pos 0 -#define reg_ccid_sx_15_8_len 8 -#define reg_ccid_sx_15_8_lsb 8 -#define xd_r_reg_ccid_sx_21_16 0xA10E -#define reg_ccid_sx_21_16_pos 0 -#define reg_ccid_sx_21_16_len 6 -#define reg_ccid_sx_21_16_lsb 16 -#define xd_r_reg_ccid_sy_7_0 0xA110 -#define reg_ccid_sy_7_0_pos 0 -#define reg_ccid_sy_7_0_len 8 -#define reg_ccid_sy_7_0_lsb 0 -#define xd_r_reg_ccid_sy_15_8 0xA111 -#define reg_ccid_sy_15_8_pos 0 -#define reg_ccid_sy_15_8_len 8 -#define reg_ccid_sy_15_8_lsb 8 -#define xd_r_reg_ccid_sy_23_16 0xA112 -#define reg_ccid_sy_23_16_pos 0 -#define reg_ccid_sy_23_16_len 8 -#define reg_ccid_sy_23_16_lsb 16 -#define xd_r_reg_ccid2_sz_7_0 0xA114 -#define reg_ccid2_sz_7_0_pos 0 -#define reg_ccid2_sz_7_0_len 8 -#define reg_ccid2_sz_7_0_lsb 0 -#define xd_r_reg_ccid2_sz_15_8 0xA115 -#define reg_ccid2_sz_15_8_pos 0 -#define reg_ccid2_sz_15_8_len 8 -#define reg_ccid2_sz_15_8_lsb 8 -#define xd_r_reg_ccid2_sz_23_16 0xA116 -#define reg_ccid2_sz_23_16_pos 0 -#define reg_ccid2_sz_23_16_len 8 -#define reg_ccid2_sz_23_16_lsb 16 -#define xd_r_reg_ccid2_sz_25_24 0xA117 -#define reg_ccid2_sz_25_24_pos 0 -#define reg_ccid2_sz_25_24_len 2 -#define reg_ccid2_sz_25_24_lsb 24 -#define xd_r_reg_ccid2_sy_7_0 0xA118 -#define reg_ccid2_sy_7_0_pos 0 -#define reg_ccid2_sy_7_0_len 8 -#define reg_ccid2_sy_7_0_lsb 0 -#define xd_r_reg_ccid2_sy_15_8 0xA119 -#define reg_ccid2_sy_15_8_pos 0 -#define reg_ccid2_sy_15_8_len 8 -#define reg_ccid2_sy_15_8_lsb 8 -#define xd_r_reg_ccid2_sy_23_16 0xA11A -#define reg_ccid2_sy_23_16_pos 0 -#define reg_ccid2_sy_23_16_len 8 -#define reg_ccid2_sy_23_16_lsb 16 -#define xd_r_reg_ccid2_sy_25_24 0xA11B -#define reg_ccid2_sy_25_24_pos 0 -#define reg_ccid2_sy_25_24_len 2 -#define reg_ccid2_sy_25_24_lsb 24 -#define xd_p_dagc1_accumulate_num_2k_7_0 0xA120 -#define dagc1_accumulate_num_2k_7_0_pos 0 -#define dagc1_accumulate_num_2k_7_0_len 8 -#define dagc1_accumulate_num_2k_7_0_lsb 0 -#define xd_p_dagc1_accumulate_num_2k_12_8 0xA121 -#define dagc1_accumulate_num_2k_12_8_pos 0 -#define dagc1_accumulate_num_2k_12_8_len 5 -#define dagc1_accumulate_num_2k_12_8_lsb 8 -#define xd_p_dagc1_accumulate_num_8k_7_0 0xA122 -#define dagc1_accumulate_num_8k_7_0_pos 0 -#define dagc1_accumulate_num_8k_7_0_len 8 -#define dagc1_accumulate_num_8k_7_0_lsb 0 -#define xd_p_dagc1_accumulate_num_8k_14_8 0xA123 -#define dagc1_accumulate_num_8k_14_8_pos 0 -#define dagc1_accumulate_num_8k_14_8_len 7 -#define dagc1_accumulate_num_8k_14_8_lsb 8 -#define xd_p_dagc1_desired_level_0 0xA123 -#define dagc1_desired_level_0_pos 7 -#define dagc1_desired_level_0_len 1 -#define dagc1_desired_level_0_lsb 0 -#define xd_p_dagc1_desired_level_8_1 0xA124 -#define dagc1_desired_level_8_1_pos 0 -#define dagc1_desired_level_8_1_len 8 -#define dagc1_desired_level_8_1_lsb 1 -#define xd_p_dagc1_apply_delay 0xA125 -#define dagc1_apply_delay_pos 0 -#define dagc1_apply_delay_len 7 -#define dagc1_apply_delay_lsb 0 -#define xd_p_dagc1_bypass_scale_ctl 0xA126 -#define dagc1_bypass_scale_ctl_pos 0 -#define dagc1_bypass_scale_ctl_len 2 -#define dagc1_bypass_scale_ctl_lsb 0 -#define xd_p_reg_dagc1_in_sat_cnt_7_0 0xA127 -#define reg_dagc1_in_sat_cnt_7_0_pos 0 -#define reg_dagc1_in_sat_cnt_7_0_len 8 -#define reg_dagc1_in_sat_cnt_7_0_lsb 0 -#define xd_p_reg_dagc1_in_sat_cnt_15_8 0xA128 -#define reg_dagc1_in_sat_cnt_15_8_pos 0 -#define reg_dagc1_in_sat_cnt_15_8_len 8 -#define reg_dagc1_in_sat_cnt_15_8_lsb 8 -#define xd_p_reg_dagc1_in_sat_cnt_23_16 0xA129 -#define reg_dagc1_in_sat_cnt_23_16_pos 0 -#define reg_dagc1_in_sat_cnt_23_16_len 8 -#define reg_dagc1_in_sat_cnt_23_16_lsb 16 -#define xd_p_reg_dagc1_in_sat_cnt_31_24 0xA12A -#define reg_dagc1_in_sat_cnt_31_24_pos 0 -#define reg_dagc1_in_sat_cnt_31_24_len 8 -#define reg_dagc1_in_sat_cnt_31_24_lsb 24 -#define xd_p_reg_dagc1_out_sat_cnt_7_0 0xA12B -#define reg_dagc1_out_sat_cnt_7_0_pos 0 -#define reg_dagc1_out_sat_cnt_7_0_len 8 -#define reg_dagc1_out_sat_cnt_7_0_lsb 0 -#define xd_p_reg_dagc1_out_sat_cnt_15_8 0xA12C -#define reg_dagc1_out_sat_cnt_15_8_pos 0 -#define reg_dagc1_out_sat_cnt_15_8_len 8 -#define reg_dagc1_out_sat_cnt_15_8_lsb 8 -#define xd_p_reg_dagc1_out_sat_cnt_23_16 0xA12D -#define reg_dagc1_out_sat_cnt_23_16_pos 0 -#define reg_dagc1_out_sat_cnt_23_16_len 8 -#define reg_dagc1_out_sat_cnt_23_16_lsb 16 -#define xd_p_reg_dagc1_out_sat_cnt_31_24 0xA12E -#define reg_dagc1_out_sat_cnt_31_24_pos 0 -#define reg_dagc1_out_sat_cnt_31_24_len 8 -#define reg_dagc1_out_sat_cnt_31_24_lsb 24 -#define xd_r_dagc1_multiplier_7_0 0xA136 -#define dagc1_multiplier_7_0_pos 0 -#define dagc1_multiplier_7_0_len 8 -#define dagc1_multiplier_7_0_lsb 0 -#define xd_r_dagc1_multiplier_15_8 0xA137 -#define dagc1_multiplier_15_8_pos 0 -#define dagc1_multiplier_15_8_len 8 -#define dagc1_multiplier_15_8_lsb 8 -#define xd_r_dagc1_right_shift_bits 0xA138 -#define dagc1_right_shift_bits_pos 0 -#define dagc1_right_shift_bits_len 4 -#define dagc1_right_shift_bits_lsb 0 -#define xd_p_reg_bfs_fcw_7_0 0xA140 -#define reg_bfs_fcw_7_0_pos 0 -#define reg_bfs_fcw_7_0_len 8 -#define reg_bfs_fcw_7_0_lsb 0 -#define xd_p_reg_bfs_fcw_15_8 0xA141 -#define reg_bfs_fcw_15_8_pos 0 -#define reg_bfs_fcw_15_8_len 8 -#define reg_bfs_fcw_15_8_lsb 8 -#define xd_p_reg_bfs_fcw_22_16 0xA142 -#define reg_bfs_fcw_22_16_pos 0 -#define reg_bfs_fcw_22_16_len 7 -#define reg_bfs_fcw_22_16_lsb 16 -#define xd_p_reg_antif_sf_7_0 0xA144 -#define reg_antif_sf_7_0_pos 0 -#define reg_antif_sf_7_0_len 8 -#define reg_antif_sf_7_0_lsb 0 -#define xd_p_reg_antif_sf_11_8 0xA145 -#define reg_antif_sf_11_8_pos 0 -#define reg_antif_sf_11_8_len 4 -#define reg_antif_sf_11_8_lsb 8 -#define xd_r_bfs_fcw_q_7_0 0xA150 -#define bfs_fcw_q_7_0_pos 0 -#define bfs_fcw_q_7_0_len 8 -#define bfs_fcw_q_7_0_lsb 0 -#define xd_r_bfs_fcw_q_15_8 0xA151 -#define bfs_fcw_q_15_8_pos 0 -#define bfs_fcw_q_15_8_len 8 -#define bfs_fcw_q_15_8_lsb 8 -#define xd_r_bfs_fcw_q_22_16 0xA152 -#define bfs_fcw_q_22_16_pos 0 -#define bfs_fcw_q_22_16_len 7 -#define bfs_fcw_q_22_16_lsb 16 -#define xd_p_reg_dca_enu 0xA160 -#define reg_dca_enu_pos 0 -#define reg_dca_enu_len 1 -#define reg_dca_enu_lsb 0 -#define xd_p_reg_dca_enl 0xA160 -#define reg_dca_enl_pos 1 -#define reg_dca_enl_len 1 -#define reg_dca_enl_lsb 0 -#define xd_p_reg_dca_lower_chip 0xA160 -#define reg_dca_lower_chip_pos 2 -#define reg_dca_lower_chip_len 1 -#define reg_dca_lower_chip_lsb 0 -#define xd_p_reg_dca_upper_chip 0xA160 -#define reg_dca_upper_chip_pos 3 -#define reg_dca_upper_chip_len 1 -#define reg_dca_upper_chip_lsb 0 -#define xd_p_reg_dca_platch 0xA160 -#define reg_dca_platch_pos 4 -#define reg_dca_platch_len 1 -#define reg_dca_platch_lsb 0 -#define xd_p_reg_dca_th 0xA161 -#define reg_dca_th_pos 0 -#define reg_dca_th_len 5 -#define reg_dca_th_lsb 0 -#define xd_p_reg_dca_scale 0xA162 -#define reg_dca_scale_pos 0 -#define reg_dca_scale_len 4 -#define reg_dca_scale_lsb 0 -#define xd_p_reg_dca_tone_7_0 0xA163 -#define reg_dca_tone_7_0_pos 0 -#define reg_dca_tone_7_0_len 8 -#define reg_dca_tone_7_0_lsb 0 -#define xd_p_reg_dca_tone_12_8 0xA164 -#define reg_dca_tone_12_8_pos 0 -#define reg_dca_tone_12_8_len 5 -#define reg_dca_tone_12_8_lsb 8 -#define xd_p_reg_dca_time_7_0 0xA165 -#define reg_dca_time_7_0_pos 0 -#define reg_dca_time_7_0_len 8 -#define reg_dca_time_7_0_lsb 0 -#define xd_p_reg_dca_time_15_8 0xA166 -#define reg_dca_time_15_8_pos 0 -#define reg_dca_time_15_8_len 8 -#define reg_dca_time_15_8_lsb 8 -#define xd_r_dcasm 0xA167 -#define dcasm_pos 0 -#define dcasm_len 3 -#define dcasm_lsb 0 -#define xd_p_reg_qnt_valuew_7_0 0xA168 -#define reg_qnt_valuew_7_0_pos 0 -#define reg_qnt_valuew_7_0_len 8 -#define reg_qnt_valuew_7_0_lsb 0 -#define xd_p_reg_qnt_valuew_10_8 0xA169 -#define reg_qnt_valuew_10_8_pos 0 -#define reg_qnt_valuew_10_8_len 3 -#define reg_qnt_valuew_10_8_lsb 8 -#define xd_p_dca_sbx_gain_diff_7_0 0xA16A -#define dca_sbx_gain_diff_7_0_pos 0 -#define dca_sbx_gain_diff_7_0_len 8 -#define dca_sbx_gain_diff_7_0_lsb 0 -#define xd_p_dca_sbx_gain_diff_9_8 0xA16B -#define dca_sbx_gain_diff_9_8_pos 0 -#define dca_sbx_gain_diff_9_8_len 2 -#define dca_sbx_gain_diff_9_8_lsb 8 -#define xd_p_reg_dca_stand_alone 0xA16C -#define reg_dca_stand_alone_pos 0 -#define reg_dca_stand_alone_len 1 -#define reg_dca_stand_alone_lsb 0 -#define xd_p_reg_dca_upper_out_en 0xA16C -#define reg_dca_upper_out_en_pos 1 -#define reg_dca_upper_out_en_len 1 -#define reg_dca_upper_out_en_lsb 0 -#define xd_p_reg_dca_rc_en 0xA16C -#define reg_dca_rc_en_pos 2 -#define reg_dca_rc_en_len 1 -#define reg_dca_rc_en_lsb 0 -#define xd_p_reg_dca_retrain_send 0xA16C -#define reg_dca_retrain_send_pos 3 -#define reg_dca_retrain_send_len 1 -#define reg_dca_retrain_send_lsb 0 -#define xd_p_reg_dca_retrain_rec 0xA16C -#define reg_dca_retrain_rec_pos 4 -#define reg_dca_retrain_rec_len 1 -#define reg_dca_retrain_rec_lsb 0 -#define xd_p_reg_dca_api_tpsrdy 0xA16C -#define reg_dca_api_tpsrdy_pos 5 -#define reg_dca_api_tpsrdy_len 1 -#define reg_dca_api_tpsrdy_lsb 0 -#define xd_p_reg_dca_symbol_gap 0xA16D -#define reg_dca_symbol_gap_pos 0 -#define reg_dca_symbol_gap_len 4 -#define reg_dca_symbol_gap_lsb 0 -#define xd_p_reg_qnt_nfvaluew_7_0 0xA16E -#define reg_qnt_nfvaluew_7_0_pos 0 -#define reg_qnt_nfvaluew_7_0_len 8 -#define reg_qnt_nfvaluew_7_0_lsb 0 -#define xd_p_reg_qnt_nfvaluew_10_8 0xA16F -#define reg_qnt_nfvaluew_10_8_pos 0 -#define reg_qnt_nfvaluew_10_8_len 3 -#define reg_qnt_nfvaluew_10_8_lsb 8 -#define xd_p_reg_qnt_flatness_thr_7_0 0xA170 -#define reg_qnt_flatness_thr_7_0_pos 0 -#define reg_qnt_flatness_thr_7_0_len 8 -#define reg_qnt_flatness_thr_7_0_lsb 0 -#define xd_p_reg_qnt_flatness_thr_9_8 0xA171 -#define reg_qnt_flatness_thr_9_8_pos 0 -#define reg_qnt_flatness_thr_9_8_len 2 -#define reg_qnt_flatness_thr_9_8_lsb 8 -#define xd_p_reg_dca_tone_idx_5_0 0xA171 -#define reg_dca_tone_idx_5_0_pos 2 -#define reg_dca_tone_idx_5_0_len 6 -#define reg_dca_tone_idx_5_0_lsb 0 -#define xd_p_reg_dca_tone_idx_12_6 0xA172 -#define reg_dca_tone_idx_12_6_pos 0 -#define reg_dca_tone_idx_12_6_len 7 -#define reg_dca_tone_idx_12_6_lsb 6 -#define xd_p_reg_dca_data_vld 0xA173 -#define reg_dca_data_vld_pos 0 -#define reg_dca_data_vld_len 1 -#define reg_dca_data_vld_lsb 0 -#define xd_p_reg_dca_read_update 0xA173 -#define reg_dca_read_update_pos 1 -#define reg_dca_read_update_len 1 -#define reg_dca_read_update_lsb 0 -#define xd_r_reg_dca_data_re_5_0 0xA173 -#define reg_dca_data_re_5_0_pos 2 -#define reg_dca_data_re_5_0_len 6 -#define reg_dca_data_re_5_0_lsb 0 -#define xd_r_reg_dca_data_re_10_6 0xA174 -#define reg_dca_data_re_10_6_pos 0 -#define reg_dca_data_re_10_6_len 5 -#define reg_dca_data_re_10_6_lsb 6 -#define xd_r_reg_dca_data_im_7_0 0xA175 -#define reg_dca_data_im_7_0_pos 0 -#define reg_dca_data_im_7_0_len 8 -#define reg_dca_data_im_7_0_lsb 0 -#define xd_r_reg_dca_data_im_10_8 0xA176 -#define reg_dca_data_im_10_8_pos 0 -#define reg_dca_data_im_10_8_len 3 -#define reg_dca_data_im_10_8_lsb 8 -#define xd_r_reg_dca_data_h2_7_0 0xA178 -#define reg_dca_data_h2_7_0_pos 0 -#define reg_dca_data_h2_7_0_len 8 -#define reg_dca_data_h2_7_0_lsb 0 -#define xd_r_reg_dca_data_h2_9_8 0xA179 -#define reg_dca_data_h2_9_8_pos 0 -#define reg_dca_data_h2_9_8_len 2 -#define reg_dca_data_h2_9_8_lsb 8 -#define xd_p_reg_f_adc_7_0 0xA180 -#define reg_f_adc_7_0_pos 0 -#define reg_f_adc_7_0_len 8 -#define reg_f_adc_7_0_lsb 0 -#define xd_p_reg_f_adc_15_8 0xA181 -#define reg_f_adc_15_8_pos 0 -#define reg_f_adc_15_8_len 8 -#define reg_f_adc_15_8_lsb 8 -#define xd_p_reg_f_adc_23_16 0xA182 -#define reg_f_adc_23_16_pos 0 -#define reg_f_adc_23_16_len 8 -#define reg_f_adc_23_16_lsb 16 -#define xd_r_intp_mu_7_0 0xA190 -#define intp_mu_7_0_pos 0 -#define intp_mu_7_0_len 8 -#define intp_mu_7_0_lsb 0 -#define xd_r_intp_mu_15_8 0xA191 -#define intp_mu_15_8_pos 0 -#define intp_mu_15_8_len 8 -#define intp_mu_15_8_lsb 8 -#define xd_r_intp_mu_19_16 0xA192 -#define intp_mu_19_16_pos 0 -#define intp_mu_19_16_len 4 -#define intp_mu_19_16_lsb 16 -#define xd_p_reg_agc_rst 0xA1A0 -#define reg_agc_rst_pos 0 -#define reg_agc_rst_len 1 -#define reg_agc_rst_lsb 0 -#define xd_p_rf_agc_en 0xA1A0 -#define rf_agc_en_pos 1 -#define rf_agc_en_len 1 -#define rf_agc_en_lsb 0 -#define xd_p_rf_agc_dis 0xA1A0 -#define rf_agc_dis_pos 2 -#define rf_agc_dis_len 1 -#define rf_agc_dis_lsb 0 -#define xd_p_if_agc_rst 0xA1A0 -#define if_agc_rst_pos 3 -#define if_agc_rst_len 1 -#define if_agc_rst_lsb 0 -#define xd_p_if_agc_en 0xA1A0 -#define if_agc_en_pos 4 -#define if_agc_en_len 1 -#define if_agc_en_lsb 0 -#define xd_p_if_agc_dis 0xA1A0 -#define if_agc_dis_pos 5 -#define if_agc_dis_len 1 -#define if_agc_dis_lsb 0 -#define xd_p_agc_lock 0xA1A0 -#define agc_lock_pos 6 -#define agc_lock_len 1 -#define agc_lock_lsb 0 -#define xd_p_reg_tinr_rst 0xA1A1 -#define reg_tinr_rst_pos 0 -#define reg_tinr_rst_len 1 -#define reg_tinr_rst_lsb 0 -#define xd_p_reg_tinr_en 0xA1A1 -#define reg_tinr_en_pos 1 -#define reg_tinr_en_len 1 -#define reg_tinr_en_lsb 0 -#define xd_p_reg_ccifs_en 0xA1A2 -#define reg_ccifs_en_pos 0 -#define reg_ccifs_en_len 1 -#define reg_ccifs_en_lsb 0 -#define xd_p_reg_ccifs_dis 0xA1A2 -#define reg_ccifs_dis_pos 1 -#define reg_ccifs_dis_len 1 -#define reg_ccifs_dis_lsb 0 -#define xd_p_reg_ccifs_rst 0xA1A2 -#define reg_ccifs_rst_pos 2 -#define reg_ccifs_rst_len 1 -#define reg_ccifs_rst_lsb 0 -#define xd_p_reg_ccifs_byp 0xA1A2 -#define reg_ccifs_byp_pos 3 -#define reg_ccifs_byp_len 1 -#define reg_ccifs_byp_lsb 0 -#define xd_p_reg_ccif_en 0xA1A3 -#define reg_ccif_en_pos 0 -#define reg_ccif_en_len 1 -#define reg_ccif_en_lsb 0 -#define xd_p_reg_ccif_dis 0xA1A3 -#define reg_ccif_dis_pos 1 -#define reg_ccif_dis_len 1 -#define reg_ccif_dis_lsb 0 -#define xd_p_reg_ccif_rst 0xA1A3 -#define reg_ccif_rst_pos 2 -#define reg_ccif_rst_len 1 -#define reg_ccif_rst_lsb 0 -#define xd_p_reg_ccif_byp 0xA1A3 -#define reg_ccif_byp_pos 3 -#define reg_ccif_byp_len 1 -#define reg_ccif_byp_lsb 0 -#define xd_p_dagc1_rst 0xA1A4 -#define dagc1_rst_pos 0 -#define dagc1_rst_len 1 -#define dagc1_rst_lsb 0 -#define xd_p_dagc1_en 0xA1A4 -#define dagc1_en_pos 1 -#define dagc1_en_len 1 -#define dagc1_en_lsb 0 -#define xd_p_dagc1_mode 0xA1A4 -#define dagc1_mode_pos 2 -#define dagc1_mode_len 2 -#define dagc1_mode_lsb 0 -#define xd_p_dagc1_done 0xA1A4 -#define dagc1_done_pos 4 -#define dagc1_done_len 1 -#define dagc1_done_lsb 0 -#define xd_p_ccid_rst 0xA1A5 -#define ccid_rst_pos 0 -#define ccid_rst_len 1 -#define ccid_rst_lsb 0 -#define xd_p_ccid_en 0xA1A5 -#define ccid_en_pos 1 -#define ccid_en_len 1 -#define ccid_en_lsb 0 -#define xd_p_ccid_mode 0xA1A5 -#define ccid_mode_pos 2 -#define ccid_mode_len 2 -#define ccid_mode_lsb 0 -#define xd_p_ccid_done 0xA1A5 -#define ccid_done_pos 4 -#define ccid_done_len 1 -#define ccid_done_lsb 0 -#define xd_r_ccid_deted 0xA1A5 -#define ccid_deted_pos 5 -#define ccid_deted_len 1 -#define ccid_deted_lsb 0 -#define xd_p_ccid2_en 0xA1A5 -#define ccid2_en_pos 6 -#define ccid2_en_len 1 -#define ccid2_en_lsb 0 -#define xd_p_ccid2_done 0xA1A5 -#define ccid2_done_pos 7 -#define ccid2_done_len 1 -#define ccid2_done_lsb 0 -#define xd_p_reg_bfs_en 0xA1A6 -#define reg_bfs_en_pos 0 -#define reg_bfs_en_len 1 -#define reg_bfs_en_lsb 0 -#define xd_p_reg_bfs_dis 0xA1A6 -#define reg_bfs_dis_pos 1 -#define reg_bfs_dis_len 1 -#define reg_bfs_dis_lsb 0 -#define xd_p_reg_bfs_rst 0xA1A6 -#define reg_bfs_rst_pos 2 -#define reg_bfs_rst_len 1 -#define reg_bfs_rst_lsb 0 -#define xd_p_reg_bfs_byp 0xA1A6 -#define reg_bfs_byp_pos 3 -#define reg_bfs_byp_len 1 -#define reg_bfs_byp_lsb 0 -#define xd_p_reg_antif_en 0xA1A7 -#define reg_antif_en_pos 0 -#define reg_antif_en_len 1 -#define reg_antif_en_lsb 0 -#define xd_p_reg_antif_dis 0xA1A7 -#define reg_antif_dis_pos 1 -#define reg_antif_dis_len 1 -#define reg_antif_dis_lsb 0 -#define xd_p_reg_antif_rst 0xA1A7 -#define reg_antif_rst_pos 2 -#define reg_antif_rst_len 1 -#define reg_antif_rst_lsb 0 -#define xd_p_reg_antif_byp 0xA1A7 -#define reg_antif_byp_pos 3 -#define reg_antif_byp_len 1 -#define reg_antif_byp_lsb 0 -#define xd_p_intp_en 0xA1A8 -#define intp_en_pos 0 -#define intp_en_len 1 -#define intp_en_lsb 0 -#define xd_p_intp_dis 0xA1A8 -#define intp_dis_pos 1 -#define intp_dis_len 1 -#define intp_dis_lsb 0 -#define xd_p_intp_rst 0xA1A8 -#define intp_rst_pos 2 -#define intp_rst_len 1 -#define intp_rst_lsb 0 -#define xd_p_intp_byp 0xA1A8 -#define intp_byp_pos 3 -#define intp_byp_len 1 -#define intp_byp_lsb 0 -#define xd_p_reg_acif_en 0xA1A9 -#define reg_acif_en_pos 0 -#define reg_acif_en_len 1 -#define reg_acif_en_lsb 0 -#define xd_p_reg_acif_dis 0xA1A9 -#define reg_acif_dis_pos 1 -#define reg_acif_dis_len 1 -#define reg_acif_dis_lsb 0 -#define xd_p_reg_acif_rst 0xA1A9 -#define reg_acif_rst_pos 2 -#define reg_acif_rst_len 1 -#define reg_acif_rst_lsb 0 -#define xd_p_reg_acif_byp 0xA1A9 -#define reg_acif_byp_pos 3 -#define reg_acif_byp_len 1 -#define reg_acif_byp_lsb 0 -#define xd_p_reg_acif_sync_mode 0xA1A9 -#define reg_acif_sync_mode_pos 4 -#define reg_acif_sync_mode_len 1 -#define reg_acif_sync_mode_lsb 0 -#define xd_p_dagc2_rst 0xA1AA -#define dagc2_rst_pos 0 -#define dagc2_rst_len 1 -#define dagc2_rst_lsb 0 -#define xd_p_dagc2_en 0xA1AA -#define dagc2_en_pos 1 -#define dagc2_en_len 1 -#define dagc2_en_lsb 0 -#define xd_p_dagc2_mode 0xA1AA -#define dagc2_mode_pos 2 -#define dagc2_mode_len 2 -#define dagc2_mode_lsb 0 -#define xd_p_dagc2_done 0xA1AA -#define dagc2_done_pos 4 -#define dagc2_done_len 1 -#define dagc2_done_lsb 0 -#define xd_p_reg_dca_en 0xA1AB -#define reg_dca_en_pos 0 -#define reg_dca_en_len 1 -#define reg_dca_en_lsb 0 -#define xd_p_dagc2_accumulate_num_2k_7_0 0xA1C0 -#define dagc2_accumulate_num_2k_7_0_pos 0 -#define dagc2_accumulate_num_2k_7_0_len 8 -#define dagc2_accumulate_num_2k_7_0_lsb 0 -#define xd_p_dagc2_accumulate_num_2k_12_8 0xA1C1 -#define dagc2_accumulate_num_2k_12_8_pos 0 -#define dagc2_accumulate_num_2k_12_8_len 5 -#define dagc2_accumulate_num_2k_12_8_lsb 8 -#define xd_p_dagc2_accumulate_num_8k_7_0 0xA1C2 -#define dagc2_accumulate_num_8k_7_0_pos 0 -#define dagc2_accumulate_num_8k_7_0_len 8 -#define dagc2_accumulate_num_8k_7_0_lsb 0 -#define xd_p_dagc2_accumulate_num_8k_12_8 0xA1C3 -#define dagc2_accumulate_num_8k_12_8_pos 0 -#define dagc2_accumulate_num_8k_12_8_len 5 -#define dagc2_accumulate_num_8k_12_8_lsb 8 -#define xd_p_dagc2_desired_level_2_0 0xA1C3 -#define dagc2_desired_level_2_0_pos 5 -#define dagc2_desired_level_2_0_len 3 -#define dagc2_desired_level_2_0_lsb 0 -#define xd_p_dagc2_desired_level_8_3 0xA1C4 -#define dagc2_desired_level_8_3_pos 0 -#define dagc2_desired_level_8_3_len 6 -#define dagc2_desired_level_8_3_lsb 3 -#define xd_p_dagc2_apply_delay 0xA1C5 -#define dagc2_apply_delay_pos 0 -#define dagc2_apply_delay_len 7 -#define dagc2_apply_delay_lsb 0 -#define xd_p_dagc2_bypass_scale_ctl 0xA1C6 -#define dagc2_bypass_scale_ctl_pos 0 -#define dagc2_bypass_scale_ctl_len 3 -#define dagc2_bypass_scale_ctl_lsb 0 -#define xd_p_dagc2_programmable_shift1 0xA1C7 -#define dagc2_programmable_shift1_pos 0 -#define dagc2_programmable_shift1_len 8 -#define dagc2_programmable_shift1_lsb 0 -#define xd_p_dagc2_programmable_shift2 0xA1C8 -#define dagc2_programmable_shift2_pos 0 -#define dagc2_programmable_shift2_len 8 -#define dagc2_programmable_shift2_lsb 0 -#define xd_p_reg_dagc2_in_sat_cnt_7_0 0xA1C9 -#define reg_dagc2_in_sat_cnt_7_0_pos 0 -#define reg_dagc2_in_sat_cnt_7_0_len 8 -#define reg_dagc2_in_sat_cnt_7_0_lsb 0 -#define xd_p_reg_dagc2_in_sat_cnt_15_8 0xA1CA -#define reg_dagc2_in_sat_cnt_15_8_pos 0 -#define reg_dagc2_in_sat_cnt_15_8_len 8 -#define reg_dagc2_in_sat_cnt_15_8_lsb 8 -#define xd_p_reg_dagc2_in_sat_cnt_23_16 0xA1CB -#define reg_dagc2_in_sat_cnt_23_16_pos 0 -#define reg_dagc2_in_sat_cnt_23_16_len 8 -#define reg_dagc2_in_sat_cnt_23_16_lsb 16 -#define xd_p_reg_dagc2_in_sat_cnt_31_24 0xA1CC -#define reg_dagc2_in_sat_cnt_31_24_pos 0 -#define reg_dagc2_in_sat_cnt_31_24_len 8 -#define reg_dagc2_in_sat_cnt_31_24_lsb 24 -#define xd_p_reg_dagc2_out_sat_cnt_7_0 0xA1CD -#define reg_dagc2_out_sat_cnt_7_0_pos 0 -#define reg_dagc2_out_sat_cnt_7_0_len 8 -#define reg_dagc2_out_sat_cnt_7_0_lsb 0 -#define xd_p_reg_dagc2_out_sat_cnt_15_8 0xA1CE -#define reg_dagc2_out_sat_cnt_15_8_pos 0 -#define reg_dagc2_out_sat_cnt_15_8_len 8 -#define reg_dagc2_out_sat_cnt_15_8_lsb 8 -#define xd_p_reg_dagc2_out_sat_cnt_23_16 0xA1CF -#define reg_dagc2_out_sat_cnt_23_16_pos 0 -#define reg_dagc2_out_sat_cnt_23_16_len 8 -#define reg_dagc2_out_sat_cnt_23_16_lsb 16 -#define xd_p_reg_dagc2_out_sat_cnt_31_24 0xA1D0 -#define reg_dagc2_out_sat_cnt_31_24_pos 0 -#define reg_dagc2_out_sat_cnt_31_24_len 8 -#define reg_dagc2_out_sat_cnt_31_24_lsb 24 -#define xd_r_dagc2_multiplier_7_0 0xA1D6 -#define dagc2_multiplier_7_0_pos 0 -#define dagc2_multiplier_7_0_len 8 -#define dagc2_multiplier_7_0_lsb 0 -#define xd_r_dagc2_multiplier_15_8 0xA1D7 -#define dagc2_multiplier_15_8_pos 0 -#define dagc2_multiplier_15_8_len 8 -#define dagc2_multiplier_15_8_lsb 8 -#define xd_r_dagc2_right_shift_bits 0xA1D8 -#define dagc2_right_shift_bits_pos 0 -#define dagc2_right_shift_bits_len 4 -#define dagc2_right_shift_bits_lsb 0 -#define xd_p_cfoe_NS_coeff1_7_0 0xA200 -#define cfoe_NS_coeff1_7_0_pos 0 -#define cfoe_NS_coeff1_7_0_len 8 -#define cfoe_NS_coeff1_7_0_lsb 0 -#define xd_p_cfoe_NS_coeff1_15_8 0xA201 -#define cfoe_NS_coeff1_15_8_pos 0 -#define cfoe_NS_coeff1_15_8_len 8 -#define cfoe_NS_coeff1_15_8_lsb 8 -#define xd_p_cfoe_NS_coeff1_23_16 0xA202 -#define cfoe_NS_coeff1_23_16_pos 0 -#define cfoe_NS_coeff1_23_16_len 8 -#define cfoe_NS_coeff1_23_16_lsb 16 -#define xd_p_cfoe_NS_coeff1_25_24 0xA203 -#define cfoe_NS_coeff1_25_24_pos 0 -#define cfoe_NS_coeff1_25_24_len 2 -#define cfoe_NS_coeff1_25_24_lsb 24 -#define xd_p_cfoe_NS_coeff2_5_0 0xA203 -#define cfoe_NS_coeff2_5_0_pos 2 -#define cfoe_NS_coeff2_5_0_len 6 -#define cfoe_NS_coeff2_5_0_lsb 0 -#define xd_p_cfoe_NS_coeff2_13_6 0xA204 -#define cfoe_NS_coeff2_13_6_pos 0 -#define cfoe_NS_coeff2_13_6_len 8 -#define cfoe_NS_coeff2_13_6_lsb 6 -#define xd_p_cfoe_NS_coeff2_21_14 0xA205 -#define cfoe_NS_coeff2_21_14_pos 0 -#define cfoe_NS_coeff2_21_14_len 8 -#define cfoe_NS_coeff2_21_14_lsb 14 -#define xd_p_cfoe_NS_coeff2_24_22 0xA206 -#define cfoe_NS_coeff2_24_22_pos 0 -#define cfoe_NS_coeff2_24_22_len 3 -#define cfoe_NS_coeff2_24_22_lsb 22 -#define xd_p_cfoe_lf_c1_4_0 0xA206 -#define cfoe_lf_c1_4_0_pos 3 -#define cfoe_lf_c1_4_0_len 5 -#define cfoe_lf_c1_4_0_lsb 0 -#define xd_p_cfoe_lf_c1_12_5 0xA207 -#define cfoe_lf_c1_12_5_pos 0 -#define cfoe_lf_c1_12_5_len 8 -#define cfoe_lf_c1_12_5_lsb 5 -#define xd_p_cfoe_lf_c1_20_13 0xA208 -#define cfoe_lf_c1_20_13_pos 0 -#define cfoe_lf_c1_20_13_len 8 -#define cfoe_lf_c1_20_13_lsb 13 -#define xd_p_cfoe_lf_c1_25_21 0xA209 -#define cfoe_lf_c1_25_21_pos 0 -#define cfoe_lf_c1_25_21_len 5 -#define cfoe_lf_c1_25_21_lsb 21 -#define xd_p_cfoe_lf_c2_2_0 0xA209 -#define cfoe_lf_c2_2_0_pos 5 -#define cfoe_lf_c2_2_0_len 3 -#define cfoe_lf_c2_2_0_lsb 0 -#define xd_p_cfoe_lf_c2_10_3 0xA20A -#define cfoe_lf_c2_10_3_pos 0 -#define cfoe_lf_c2_10_3_len 8 -#define cfoe_lf_c2_10_3_lsb 3 -#define xd_p_cfoe_lf_c2_18_11 0xA20B -#define cfoe_lf_c2_18_11_pos 0 -#define cfoe_lf_c2_18_11_len 8 -#define cfoe_lf_c2_18_11_lsb 11 -#define xd_p_cfoe_lf_c2_25_19 0xA20C -#define cfoe_lf_c2_25_19_pos 0 -#define cfoe_lf_c2_25_19_len 7 -#define cfoe_lf_c2_25_19_lsb 19 -#define xd_p_cfoe_ifod_7_0 0xA20D -#define cfoe_ifod_7_0_pos 0 -#define cfoe_ifod_7_0_len 8 -#define cfoe_ifod_7_0_lsb 0 -#define xd_p_cfoe_ifod_10_8 0xA20E -#define cfoe_ifod_10_8_pos 0 -#define cfoe_ifod_10_8_len 3 -#define cfoe_ifod_10_8_lsb 8 -#define xd_p_cfoe_Divg_ctr_th 0xA20E -#define cfoe_Divg_ctr_th_pos 4 -#define cfoe_Divg_ctr_th_len 4 -#define cfoe_Divg_ctr_th_lsb 0 -#define xd_p_cfoe_FOT_divg_th 0xA20F -#define cfoe_FOT_divg_th_pos 0 -#define cfoe_FOT_divg_th_len 8 -#define cfoe_FOT_divg_th_lsb 0 -#define xd_p_cfoe_FOT_cnvg_th 0xA210 -#define cfoe_FOT_cnvg_th_pos 0 -#define cfoe_FOT_cnvg_th_len 8 -#define cfoe_FOT_cnvg_th_lsb 0 -#define xd_p_reg_cfoe_offset_7_0 0xA211 -#define reg_cfoe_offset_7_0_pos 0 -#define reg_cfoe_offset_7_0_len 8 -#define reg_cfoe_offset_7_0_lsb 0 -#define xd_p_reg_cfoe_offset_9_8 0xA212 -#define reg_cfoe_offset_9_8_pos 0 -#define reg_cfoe_offset_9_8_len 2 -#define reg_cfoe_offset_9_8_lsb 8 -#define xd_p_reg_cfoe_ifoe_sign_corr 0xA212 -#define reg_cfoe_ifoe_sign_corr_pos 2 -#define reg_cfoe_ifoe_sign_corr_len 1 -#define reg_cfoe_ifoe_sign_corr_lsb 0 -#define xd_r_cfoe_fot_LF_output_7_0 0xA218 -#define cfoe_fot_LF_output_7_0_pos 0 -#define cfoe_fot_LF_output_7_0_len 8 -#define cfoe_fot_LF_output_7_0_lsb 0 -#define xd_r_cfoe_fot_LF_output_15_8 0xA219 -#define cfoe_fot_LF_output_15_8_pos 0 -#define cfoe_fot_LF_output_15_8_len 8 -#define cfoe_fot_LF_output_15_8_lsb 8 -#define xd_r_cfoe_ifo_metric_7_0 0xA21A -#define cfoe_ifo_metric_7_0_pos 0 -#define cfoe_ifo_metric_7_0_len 8 -#define cfoe_ifo_metric_7_0_lsb 0 -#define xd_r_cfoe_ifo_metric_15_8 0xA21B -#define cfoe_ifo_metric_15_8_pos 0 -#define cfoe_ifo_metric_15_8_len 8 -#define cfoe_ifo_metric_15_8_lsb 8 -#define xd_r_cfoe_ifo_metric_23_16 0xA21C -#define cfoe_ifo_metric_23_16_pos 0 -#define cfoe_ifo_metric_23_16_len 8 -#define cfoe_ifo_metric_23_16_lsb 16 -#define xd_p_ste_Nu 0xA220 -#define ste_Nu_pos 0 -#define ste_Nu_len 2 -#define ste_Nu_lsb 0 -#define xd_p_ste_GI 0xA220 -#define ste_GI_pos 2 -#define ste_GI_len 3 -#define ste_GI_lsb 0 -#define xd_p_ste_symbol_num 0xA221 -#define ste_symbol_num_pos 0 -#define ste_symbol_num_len 2 -#define ste_symbol_num_lsb 0 -#define xd_p_ste_sample_num 0xA221 -#define ste_sample_num_pos 2 -#define ste_sample_num_len 2 -#define ste_sample_num_lsb 0 -#define xd_p_reg_ste_buf_en 0xA221 -#define reg_ste_buf_en_pos 7 -#define reg_ste_buf_en_len 1 -#define reg_ste_buf_en_lsb 0 -#define xd_p_ste_FFT_offset_7_0 0xA222 -#define ste_FFT_offset_7_0_pos 0 -#define ste_FFT_offset_7_0_len 8 -#define ste_FFT_offset_7_0_lsb 0 -#define xd_p_ste_FFT_offset_11_8 0xA223 -#define ste_FFT_offset_11_8_pos 0 -#define ste_FFT_offset_11_8_len 4 -#define ste_FFT_offset_11_8_lsb 8 -#define xd_p_reg_ste_tstmod 0xA223 -#define reg_ste_tstmod_pos 5 -#define reg_ste_tstmod_len 1 -#define reg_ste_tstmod_lsb 0 -#define xd_p_ste_adv_start_7_0 0xA224 -#define ste_adv_start_7_0_pos 0 -#define ste_adv_start_7_0_len 8 -#define ste_adv_start_7_0_lsb 0 -#define xd_p_ste_adv_start_10_8 0xA225 -#define ste_adv_start_10_8_pos 0 -#define ste_adv_start_10_8_len 3 -#define ste_adv_start_10_8_lsb 8 -#define xd_p_ste_adv_stop 0xA226 -#define ste_adv_stop_pos 0 -#define ste_adv_stop_len 8 -#define ste_adv_stop_lsb 0 -#define xd_r_ste_P_value_7_0 0xA228 -#define ste_P_value_7_0_pos 0 -#define ste_P_value_7_0_len 8 -#define ste_P_value_7_0_lsb 0 -#define xd_r_ste_P_value_10_8 0xA229 -#define ste_P_value_10_8_pos 0 -#define ste_P_value_10_8_len 3 -#define ste_P_value_10_8_lsb 8 -#define xd_r_ste_M_value_7_0 0xA22A -#define ste_M_value_7_0_pos 0 -#define ste_M_value_7_0_len 8 -#define ste_M_value_7_0_lsb 0 -#define xd_r_ste_M_value_10_8 0xA22B -#define ste_M_value_10_8_pos 0 -#define ste_M_value_10_8_len 3 -#define ste_M_value_10_8_lsb 8 -#define xd_r_ste_H1 0xA22C -#define ste_H1_pos 0 -#define ste_H1_len 7 -#define ste_H1_lsb 0 -#define xd_r_ste_H2 0xA22D -#define ste_H2_pos 0 -#define ste_H2_len 7 -#define ste_H2_lsb 0 -#define xd_r_ste_H3 0xA22E -#define ste_H3_pos 0 -#define ste_H3_len 7 -#define ste_H3_lsb 0 -#define xd_r_ste_H4 0xA22F -#define ste_H4_pos 0 -#define ste_H4_len 7 -#define ste_H4_lsb 0 -#define xd_r_ste_Corr_value_I_7_0 0xA230 -#define ste_Corr_value_I_7_0_pos 0 -#define ste_Corr_value_I_7_0_len 8 -#define ste_Corr_value_I_7_0_lsb 0 -#define xd_r_ste_Corr_value_I_15_8 0xA231 -#define ste_Corr_value_I_15_8_pos 0 -#define ste_Corr_value_I_15_8_len 8 -#define ste_Corr_value_I_15_8_lsb 8 -#define xd_r_ste_Corr_value_I_23_16 0xA232 -#define ste_Corr_value_I_23_16_pos 0 -#define ste_Corr_value_I_23_16_len 8 -#define ste_Corr_value_I_23_16_lsb 16 -#define xd_r_ste_Corr_value_I_27_24 0xA233 -#define ste_Corr_value_I_27_24_pos 0 -#define ste_Corr_value_I_27_24_len 4 -#define ste_Corr_value_I_27_24_lsb 24 -#define xd_r_ste_Corr_value_Q_7_0 0xA234 -#define ste_Corr_value_Q_7_0_pos 0 -#define ste_Corr_value_Q_7_0_len 8 -#define ste_Corr_value_Q_7_0_lsb 0 -#define xd_r_ste_Corr_value_Q_15_8 0xA235 -#define ste_Corr_value_Q_15_8_pos 0 -#define ste_Corr_value_Q_15_8_len 8 -#define ste_Corr_value_Q_15_8_lsb 8 -#define xd_r_ste_Corr_value_Q_23_16 0xA236 -#define ste_Corr_value_Q_23_16_pos 0 -#define ste_Corr_value_Q_23_16_len 8 -#define ste_Corr_value_Q_23_16_lsb 16 -#define xd_r_ste_Corr_value_Q_27_24 0xA237 -#define ste_Corr_value_Q_27_24_pos 0 -#define ste_Corr_value_Q_27_24_len 4 -#define ste_Corr_value_Q_27_24_lsb 24 -#define xd_r_ste_J_num_7_0 0xA238 -#define ste_J_num_7_0_pos 0 -#define ste_J_num_7_0_len 8 -#define ste_J_num_7_0_lsb 0 -#define xd_r_ste_J_num_15_8 0xA239 -#define ste_J_num_15_8_pos 0 -#define ste_J_num_15_8_len 8 -#define ste_J_num_15_8_lsb 8 -#define xd_r_ste_J_num_23_16 0xA23A -#define ste_J_num_23_16_pos 0 -#define ste_J_num_23_16_len 8 -#define ste_J_num_23_16_lsb 16 -#define xd_r_ste_J_num_31_24 0xA23B -#define ste_J_num_31_24_pos 0 -#define ste_J_num_31_24_len 8 -#define ste_J_num_31_24_lsb 24 -#define xd_r_ste_J_den_7_0 0xA23C -#define ste_J_den_7_0_pos 0 -#define ste_J_den_7_0_len 8 -#define ste_J_den_7_0_lsb 0 -#define xd_r_ste_J_den_15_8 0xA23D -#define ste_J_den_15_8_pos 0 -#define ste_J_den_15_8_len 8 -#define ste_J_den_15_8_lsb 8 -#define xd_r_ste_J_den_18_16 0xA23E -#define ste_J_den_18_16_pos 0 -#define ste_J_den_18_16_len 3 -#define ste_J_den_18_16_lsb 16 -#define xd_r_ste_Beacon_Indicator 0xA23E -#define ste_Beacon_Indicator_pos 4 -#define ste_Beacon_Indicator_len 1 -#define ste_Beacon_Indicator_lsb 0 -#define xd_r_tpsd_Frame_Num 0xA250 -#define tpsd_Frame_Num_pos 0 -#define tpsd_Frame_Num_len 2 -#define tpsd_Frame_Num_lsb 0 -#define xd_r_tpsd_Constel 0xA250 -#define tpsd_Constel_pos 2 -#define tpsd_Constel_len 2 -#define tpsd_Constel_lsb 0 -#define xd_r_tpsd_GI 0xA250 -#define tpsd_GI_pos 4 -#define tpsd_GI_len 2 -#define tpsd_GI_lsb 0 -#define xd_r_tpsd_Mode 0xA250 -#define tpsd_Mode_pos 6 -#define tpsd_Mode_len 2 -#define tpsd_Mode_lsb 0 -#define xd_r_tpsd_CR_HP 0xA251 -#define tpsd_CR_HP_pos 0 -#define tpsd_CR_HP_len 3 -#define tpsd_CR_HP_lsb 0 -#define xd_r_tpsd_CR_LP 0xA251 -#define tpsd_CR_LP_pos 3 -#define tpsd_CR_LP_len 3 -#define tpsd_CR_LP_lsb 0 -#define xd_r_tpsd_Hie 0xA252 -#define tpsd_Hie_pos 0 -#define tpsd_Hie_len 3 -#define tpsd_Hie_lsb 0 -#define xd_r_tpsd_Res_Bits 0xA252 -#define tpsd_Res_Bits_pos 3 -#define tpsd_Res_Bits_len 5 -#define tpsd_Res_Bits_lsb 0 -#define xd_r_tpsd_Res_Bits_0 0xA253 -#define tpsd_Res_Bits_0_pos 0 -#define tpsd_Res_Bits_0_len 1 -#define tpsd_Res_Bits_0_lsb 0 -#define xd_r_tpsd_LengthInd 0xA253 -#define tpsd_LengthInd_pos 1 -#define tpsd_LengthInd_len 6 -#define tpsd_LengthInd_lsb 0 -#define xd_r_tpsd_Cell_Id_7_0 0xA254 -#define tpsd_Cell_Id_7_0_pos 0 -#define tpsd_Cell_Id_7_0_len 8 -#define tpsd_Cell_Id_7_0_lsb 0 -#define xd_r_tpsd_Cell_Id_15_8 0xA255 -#define tpsd_Cell_Id_15_8_pos 0 -#define tpsd_Cell_Id_15_8_len 8 -#define tpsd_Cell_Id_15_8_lsb 0 -#define xd_p_reg_fft_mask_tone0_7_0 0xA260 -#define reg_fft_mask_tone0_7_0_pos 0 -#define reg_fft_mask_tone0_7_0_len 8 -#define reg_fft_mask_tone0_7_0_lsb 0 -#define xd_p_reg_fft_mask_tone0_12_8 0xA261 -#define reg_fft_mask_tone0_12_8_pos 0 -#define reg_fft_mask_tone0_12_8_len 5 -#define reg_fft_mask_tone0_12_8_lsb 8 -#define xd_p_reg_fft_mask_tone1_7_0 0xA262 -#define reg_fft_mask_tone1_7_0_pos 0 -#define reg_fft_mask_tone1_7_0_len 8 -#define reg_fft_mask_tone1_7_0_lsb 0 -#define xd_p_reg_fft_mask_tone1_12_8 0xA263 -#define reg_fft_mask_tone1_12_8_pos 0 -#define reg_fft_mask_tone1_12_8_len 5 -#define reg_fft_mask_tone1_12_8_lsb 8 -#define xd_p_reg_fft_mask_tone2_7_0 0xA264 -#define reg_fft_mask_tone2_7_0_pos 0 -#define reg_fft_mask_tone2_7_0_len 8 -#define reg_fft_mask_tone2_7_0_lsb 0 -#define xd_p_reg_fft_mask_tone2_12_8 0xA265 -#define reg_fft_mask_tone2_12_8_pos 0 -#define reg_fft_mask_tone2_12_8_len 5 -#define reg_fft_mask_tone2_12_8_lsb 8 -#define xd_p_reg_fft_mask_tone3_7_0 0xA266 -#define reg_fft_mask_tone3_7_0_pos 0 -#define reg_fft_mask_tone3_7_0_len 8 -#define reg_fft_mask_tone3_7_0_lsb 0 -#define xd_p_reg_fft_mask_tone3_12_8 0xA267 -#define reg_fft_mask_tone3_12_8_pos 0 -#define reg_fft_mask_tone3_12_8_len 5 -#define reg_fft_mask_tone3_12_8_lsb 8 -#define xd_p_reg_fft_mask_from0_7_0 0xA268 -#define reg_fft_mask_from0_7_0_pos 0 -#define reg_fft_mask_from0_7_0_len 8 -#define reg_fft_mask_from0_7_0_lsb 0 -#define xd_p_reg_fft_mask_from0_12_8 0xA269 -#define reg_fft_mask_from0_12_8_pos 0 -#define reg_fft_mask_from0_12_8_len 5 -#define reg_fft_mask_from0_12_8_lsb 8 -#define xd_p_reg_fft_mask_to0_7_0 0xA26A -#define reg_fft_mask_to0_7_0_pos 0 -#define reg_fft_mask_to0_7_0_len 8 -#define reg_fft_mask_to0_7_0_lsb 0 -#define xd_p_reg_fft_mask_to0_12_8 0xA26B -#define reg_fft_mask_to0_12_8_pos 0 -#define reg_fft_mask_to0_12_8_len 5 -#define reg_fft_mask_to0_12_8_lsb 8 -#define xd_p_reg_fft_mask_from1_7_0 0xA26C -#define reg_fft_mask_from1_7_0_pos 0 -#define reg_fft_mask_from1_7_0_len 8 -#define reg_fft_mask_from1_7_0_lsb 0 -#define xd_p_reg_fft_mask_from1_12_8 0xA26D -#define reg_fft_mask_from1_12_8_pos 0 -#define reg_fft_mask_from1_12_8_len 5 -#define reg_fft_mask_from1_12_8_lsb 8 -#define xd_p_reg_fft_mask_to1_7_0 0xA26E -#define reg_fft_mask_to1_7_0_pos 0 -#define reg_fft_mask_to1_7_0_len 8 -#define reg_fft_mask_to1_7_0_lsb 0 -#define xd_p_reg_fft_mask_to1_12_8 0xA26F -#define reg_fft_mask_to1_12_8_pos 0 -#define reg_fft_mask_to1_12_8_len 5 -#define reg_fft_mask_to1_12_8_lsb 8 -#define xd_p_reg_cge_idx0_7_0 0xA280 -#define reg_cge_idx0_7_0_pos 0 -#define reg_cge_idx0_7_0_len 8 -#define reg_cge_idx0_7_0_lsb 0 -#define xd_p_reg_cge_idx0_12_8 0xA281 -#define reg_cge_idx0_12_8_pos 0 -#define reg_cge_idx0_12_8_len 5 -#define reg_cge_idx0_12_8_lsb 8 -#define xd_p_reg_cge_idx1_7_0 0xA282 -#define reg_cge_idx1_7_0_pos 0 -#define reg_cge_idx1_7_0_len 8 -#define reg_cge_idx1_7_0_lsb 0 -#define xd_p_reg_cge_idx1_12_8 0xA283 -#define reg_cge_idx1_12_8_pos 0 -#define reg_cge_idx1_12_8_len 5 -#define reg_cge_idx1_12_8_lsb 8 -#define xd_p_reg_cge_idx2_7_0 0xA284 -#define reg_cge_idx2_7_0_pos 0 -#define reg_cge_idx2_7_0_len 8 -#define reg_cge_idx2_7_0_lsb 0 -#define xd_p_reg_cge_idx2_12_8 0xA285 -#define reg_cge_idx2_12_8_pos 0 -#define reg_cge_idx2_12_8_len 5 -#define reg_cge_idx2_12_8_lsb 8 -#define xd_p_reg_cge_idx3_7_0 0xA286 -#define reg_cge_idx3_7_0_pos 0 -#define reg_cge_idx3_7_0_len 8 -#define reg_cge_idx3_7_0_lsb 0 -#define xd_p_reg_cge_idx3_12_8 0xA287 -#define reg_cge_idx3_12_8_pos 0 -#define reg_cge_idx3_12_8_len 5 -#define reg_cge_idx3_12_8_lsb 8 -#define xd_p_reg_cge_idx4_7_0 0xA288 -#define reg_cge_idx4_7_0_pos 0 -#define reg_cge_idx4_7_0_len 8 -#define reg_cge_idx4_7_0_lsb 0 -#define xd_p_reg_cge_idx4_12_8 0xA289 -#define reg_cge_idx4_12_8_pos 0 -#define reg_cge_idx4_12_8_len 5 -#define reg_cge_idx4_12_8_lsb 8 -#define xd_p_reg_cge_idx5_7_0 0xA28A -#define reg_cge_idx5_7_0_pos 0 -#define reg_cge_idx5_7_0_len 8 -#define reg_cge_idx5_7_0_lsb 0 -#define xd_p_reg_cge_idx5_12_8 0xA28B -#define reg_cge_idx5_12_8_pos 0 -#define reg_cge_idx5_12_8_len 5 -#define reg_cge_idx5_12_8_lsb 8 -#define xd_p_reg_cge_idx6_7_0 0xA28C -#define reg_cge_idx6_7_0_pos 0 -#define reg_cge_idx6_7_0_len 8 -#define reg_cge_idx6_7_0_lsb 0 -#define xd_p_reg_cge_idx6_12_8 0xA28D -#define reg_cge_idx6_12_8_pos 0 -#define reg_cge_idx6_12_8_len 5 -#define reg_cge_idx6_12_8_lsb 8 -#define xd_p_reg_cge_idx7_7_0 0xA28E -#define reg_cge_idx7_7_0_pos 0 -#define reg_cge_idx7_7_0_len 8 -#define reg_cge_idx7_7_0_lsb 0 -#define xd_p_reg_cge_idx7_12_8 0xA28F -#define reg_cge_idx7_12_8_pos 0 -#define reg_cge_idx7_12_8_len 5 -#define reg_cge_idx7_12_8_lsb 8 -#define xd_p_reg_cge_idx8_7_0 0xA290 -#define reg_cge_idx8_7_0_pos 0 -#define reg_cge_idx8_7_0_len 8 -#define reg_cge_idx8_7_0_lsb 0 -#define xd_p_reg_cge_idx8_12_8 0xA291 -#define reg_cge_idx8_12_8_pos 0 -#define reg_cge_idx8_12_8_len 5 -#define reg_cge_idx8_12_8_lsb 8 -#define xd_p_reg_cge_idx9_7_0 0xA292 -#define reg_cge_idx9_7_0_pos 0 -#define reg_cge_idx9_7_0_len 8 -#define reg_cge_idx9_7_0_lsb 0 -#define xd_p_reg_cge_idx9_12_8 0xA293 -#define reg_cge_idx9_12_8_pos 0 -#define reg_cge_idx9_12_8_len 5 -#define reg_cge_idx9_12_8_lsb 8 -#define xd_p_reg_cge_idx10_7_0 0xA294 -#define reg_cge_idx10_7_0_pos 0 -#define reg_cge_idx10_7_0_len 8 -#define reg_cge_idx10_7_0_lsb 0 -#define xd_p_reg_cge_idx10_12_8 0xA295 -#define reg_cge_idx10_12_8_pos 0 -#define reg_cge_idx10_12_8_len 5 -#define reg_cge_idx10_12_8_lsb 8 -#define xd_p_reg_cge_idx11_7_0 0xA296 -#define reg_cge_idx11_7_0_pos 0 -#define reg_cge_idx11_7_0_len 8 -#define reg_cge_idx11_7_0_lsb 0 -#define xd_p_reg_cge_idx11_12_8 0xA297 -#define reg_cge_idx11_12_8_pos 0 -#define reg_cge_idx11_12_8_len 5 -#define reg_cge_idx11_12_8_lsb 8 -#define xd_p_reg_cge_idx12_7_0 0xA298 -#define reg_cge_idx12_7_0_pos 0 -#define reg_cge_idx12_7_0_len 8 -#define reg_cge_idx12_7_0_lsb 0 -#define xd_p_reg_cge_idx12_12_8 0xA299 -#define reg_cge_idx12_12_8_pos 0 -#define reg_cge_idx12_12_8_len 5 -#define reg_cge_idx12_12_8_lsb 8 -#define xd_p_reg_cge_idx13_7_0 0xA29A -#define reg_cge_idx13_7_0_pos 0 -#define reg_cge_idx13_7_0_len 8 -#define reg_cge_idx13_7_0_lsb 0 -#define xd_p_reg_cge_idx13_12_8 0xA29B -#define reg_cge_idx13_12_8_pos 0 -#define reg_cge_idx13_12_8_len 5 -#define reg_cge_idx13_12_8_lsb 8 -#define xd_p_reg_cge_idx14_7_0 0xA29C -#define reg_cge_idx14_7_0_pos 0 -#define reg_cge_idx14_7_0_len 8 -#define reg_cge_idx14_7_0_lsb 0 -#define xd_p_reg_cge_idx14_12_8 0xA29D -#define reg_cge_idx14_12_8_pos 0 -#define reg_cge_idx14_12_8_len 5 -#define reg_cge_idx14_12_8_lsb 8 -#define xd_p_reg_cge_idx15_7_0 0xA29E -#define reg_cge_idx15_7_0_pos 0 -#define reg_cge_idx15_7_0_len 8 -#define reg_cge_idx15_7_0_lsb 0 -#define xd_p_reg_cge_idx15_12_8 0xA29F -#define reg_cge_idx15_12_8_pos 0 -#define reg_cge_idx15_12_8_len 5 -#define reg_cge_idx15_12_8_lsb 8 -#define xd_r_reg_fft_crc 0xA2A8 -#define reg_fft_crc_pos 0 -#define reg_fft_crc_len 8 -#define reg_fft_crc_lsb 0 -#define xd_p_fd_fft_shift_max 0xA2A9 -#define fd_fft_shift_max_pos 0 -#define fd_fft_shift_max_len 4 -#define fd_fft_shift_max_lsb 0 -#define xd_r_fd_fft_shift 0xA2A9 -#define fd_fft_shift_pos 4 -#define fd_fft_shift_len 4 -#define fd_fft_shift_lsb 0 -#define xd_r_fd_fft_frame_num 0xA2AA -#define fd_fft_frame_num_pos 0 -#define fd_fft_frame_num_len 2 -#define fd_fft_frame_num_lsb 0 -#define xd_r_fd_fft_symbol_count 0xA2AB -#define fd_fft_symbol_count_pos 0 -#define fd_fft_symbol_count_len 7 -#define fd_fft_symbol_count_lsb 0 -#define xd_r_reg_fft_idx_max_7_0 0xA2AC -#define reg_fft_idx_max_7_0_pos 0 -#define reg_fft_idx_max_7_0_len 8 -#define reg_fft_idx_max_7_0_lsb 0 -#define xd_r_reg_fft_idx_max_12_8 0xA2AD -#define reg_fft_idx_max_12_8_pos 0 -#define reg_fft_idx_max_12_8_len 5 -#define reg_fft_idx_max_12_8_lsb 8 -#define xd_p_reg_cge_program 0xA2AE -#define reg_cge_program_pos 0 -#define reg_cge_program_len 1 -#define reg_cge_program_lsb 0 -#define xd_p_reg_cge_fixed 0xA2AE -#define reg_cge_fixed_pos 1 -#define reg_cge_fixed_len 1 -#define reg_cge_fixed_lsb 0 -#define xd_p_reg_fft_rotate_en 0xA2AE -#define reg_fft_rotate_en_pos 2 -#define reg_fft_rotate_en_len 1 -#define reg_fft_rotate_en_lsb 0 -#define xd_p_reg_fft_rotate_base_4_0 0xA2AE -#define reg_fft_rotate_base_4_0_pos 3 -#define reg_fft_rotate_base_4_0_len 5 -#define reg_fft_rotate_base_4_0_lsb 0 -#define xd_p_reg_fft_rotate_base_12_5 0xA2AF -#define reg_fft_rotate_base_12_5_pos 0 -#define reg_fft_rotate_base_12_5_len 8 -#define reg_fft_rotate_base_12_5_lsb 5 -#define xd_p_reg_gp_trigger_fd 0xA2B8 -#define reg_gp_trigger_fd_pos 0 -#define reg_gp_trigger_fd_len 1 -#define reg_gp_trigger_fd_lsb 0 -#define xd_p_reg_trigger_sel_fd 0xA2B8 -#define reg_trigger_sel_fd_pos 1 -#define reg_trigger_sel_fd_len 2 -#define reg_trigger_sel_fd_lsb 0 -#define xd_p_reg_trigger_module_sel_fd 0xA2B9 -#define reg_trigger_module_sel_fd_pos 0 -#define reg_trigger_module_sel_fd_len 6 -#define reg_trigger_module_sel_fd_lsb 0 -#define xd_p_reg_trigger_set_sel_fd 0xA2BA -#define reg_trigger_set_sel_fd_pos 0 -#define reg_trigger_set_sel_fd_len 6 -#define reg_trigger_set_sel_fd_lsb 0 -#define xd_p_reg_fd_noname_7_0 0xA2BC -#define reg_fd_noname_7_0_pos 0 -#define reg_fd_noname_7_0_len 8 -#define reg_fd_noname_7_0_lsb 0 -#define xd_p_reg_fd_noname_15_8 0xA2BD -#define reg_fd_noname_15_8_pos 0 -#define reg_fd_noname_15_8_len 8 -#define reg_fd_noname_15_8_lsb 8 -#define xd_p_reg_fd_noname_23_16 0xA2BE -#define reg_fd_noname_23_16_pos 0 -#define reg_fd_noname_23_16_len 8 -#define reg_fd_noname_23_16_lsb 16 -#define xd_p_reg_fd_noname_31_24 0xA2BF -#define reg_fd_noname_31_24_pos 0 -#define reg_fd_noname_31_24_len 8 -#define reg_fd_noname_31_24_lsb 24 -#define xd_r_fd_fpcc_cp_corr_signn 0xA2C0 -#define fd_fpcc_cp_corr_signn_pos 0 -#define fd_fpcc_cp_corr_signn_len 8 -#define fd_fpcc_cp_corr_signn_lsb 0 -#define xd_p_reg_feq_s1 0xA2C1 -#define reg_feq_s1_pos 0 -#define reg_feq_s1_len 5 -#define reg_feq_s1_lsb 0 -#define xd_p_fd_fpcc_cp_corr_tone_th 0xA2C2 -#define fd_fpcc_cp_corr_tone_th_pos 0 -#define fd_fpcc_cp_corr_tone_th_len 6 -#define fd_fpcc_cp_corr_tone_th_lsb 0 -#define xd_p_fd_fpcc_cp_corr_symbol_log_th 0xA2C3 -#define fd_fpcc_cp_corr_symbol_log_th_pos 0 -#define fd_fpcc_cp_corr_symbol_log_th_len 4 -#define fd_fpcc_cp_corr_symbol_log_th_lsb 0 -#define xd_p_fd_fpcc_cp_corr_int 0xA2C4 -#define fd_fpcc_cp_corr_int_pos 0 -#define fd_fpcc_cp_corr_int_len 1 -#define fd_fpcc_cp_corr_int_lsb 0 -#define xd_p_reg_sfoe_ns_7_0 0xA320 -#define reg_sfoe_ns_7_0_pos 0 -#define reg_sfoe_ns_7_0_len 8 -#define reg_sfoe_ns_7_0_lsb 0 -#define xd_p_reg_sfoe_ns_14_8 0xA321 -#define reg_sfoe_ns_14_8_pos 0 -#define reg_sfoe_ns_14_8_len 7 -#define reg_sfoe_ns_14_8_lsb 8 -#define xd_p_reg_sfoe_c1_7_0 0xA322 -#define reg_sfoe_c1_7_0_pos 0 -#define reg_sfoe_c1_7_0_len 8 -#define reg_sfoe_c1_7_0_lsb 0 -#define xd_p_reg_sfoe_c1_15_8 0xA323 -#define reg_sfoe_c1_15_8_pos 0 -#define reg_sfoe_c1_15_8_len 8 -#define reg_sfoe_c1_15_8_lsb 8 -#define xd_p_reg_sfoe_c1_17_16 0xA324 -#define reg_sfoe_c1_17_16_pos 0 -#define reg_sfoe_c1_17_16_len 2 -#define reg_sfoe_c1_17_16_lsb 16 -#define xd_p_reg_sfoe_c2_7_0 0xA325 -#define reg_sfoe_c2_7_0_pos 0 -#define reg_sfoe_c2_7_0_len 8 -#define reg_sfoe_c2_7_0_lsb 0 -#define xd_p_reg_sfoe_c2_15_8 0xA326 -#define reg_sfoe_c2_15_8_pos 0 -#define reg_sfoe_c2_15_8_len 8 -#define reg_sfoe_c2_15_8_lsb 8 -#define xd_p_reg_sfoe_c2_17_16 0xA327 -#define reg_sfoe_c2_17_16_pos 0 -#define reg_sfoe_c2_17_16_len 2 -#define reg_sfoe_c2_17_16_lsb 16 -#define xd_r_reg_sfoe_out_9_2 0xA328 -#define reg_sfoe_out_9_2_pos 0 -#define reg_sfoe_out_9_2_len 8 -#define reg_sfoe_out_9_2_lsb 0 -#define xd_r_reg_sfoe_out_1_0 0xA329 -#define reg_sfoe_out_1_0_pos 0 -#define reg_sfoe_out_1_0_len 2 -#define reg_sfoe_out_1_0_lsb 0 -#define xd_p_reg_sfoe_lm_counter_th 0xA32A -#define reg_sfoe_lm_counter_th_pos 0 -#define reg_sfoe_lm_counter_th_len 4 -#define reg_sfoe_lm_counter_th_lsb 0 -#define xd_p_reg_sfoe_convg_th 0xA32B -#define reg_sfoe_convg_th_pos 0 -#define reg_sfoe_convg_th_len 8 -#define reg_sfoe_convg_th_lsb 0 -#define xd_p_reg_sfoe_divg_th 0xA32C -#define reg_sfoe_divg_th_pos 0 -#define reg_sfoe_divg_th_len 8 -#define reg_sfoe_divg_th_lsb 0 -#define xd_p_fd_tpsd_en 0xA330 -#define fd_tpsd_en_pos 0 -#define fd_tpsd_en_len 1 -#define fd_tpsd_en_lsb 0 -#define xd_p_fd_tpsd_dis 0xA330 -#define fd_tpsd_dis_pos 1 -#define fd_tpsd_dis_len 1 -#define fd_tpsd_dis_lsb 0 -#define xd_p_fd_tpsd_rst 0xA330 -#define fd_tpsd_rst_pos 2 -#define fd_tpsd_rst_len 1 -#define fd_tpsd_rst_lsb 0 -#define xd_p_fd_tpsd_lock 0xA330 -#define fd_tpsd_lock_pos 3 -#define fd_tpsd_lock_len 1 -#define fd_tpsd_lock_lsb 0 -#define xd_r_fd_tpsd_s19 0xA330 -#define fd_tpsd_s19_pos 4 -#define fd_tpsd_s19_len 1 -#define fd_tpsd_s19_lsb 0 -#define xd_r_fd_tpsd_s17 0xA330 -#define fd_tpsd_s17_pos 5 -#define fd_tpsd_s17_len 1 -#define fd_tpsd_s17_lsb 0 -#define xd_p_fd_sfr_ste_en 0xA331 -#define fd_sfr_ste_en_pos 0 -#define fd_sfr_ste_en_len 1 -#define fd_sfr_ste_en_lsb 0 -#define xd_p_fd_sfr_ste_dis 0xA331 -#define fd_sfr_ste_dis_pos 1 -#define fd_sfr_ste_dis_len 1 -#define fd_sfr_ste_dis_lsb 0 -#define xd_p_fd_sfr_ste_rst 0xA331 -#define fd_sfr_ste_rst_pos 2 -#define fd_sfr_ste_rst_len 1 -#define fd_sfr_ste_rst_lsb 0 -#define xd_p_fd_sfr_ste_mode 0xA331 -#define fd_sfr_ste_mode_pos 3 -#define fd_sfr_ste_mode_len 1 -#define fd_sfr_ste_mode_lsb 0 -#define xd_p_fd_sfr_ste_done 0xA331 -#define fd_sfr_ste_done_pos 4 -#define fd_sfr_ste_done_len 1 -#define fd_sfr_ste_done_lsb 0 -#define xd_p_reg_cfoe_ffoe_en 0xA332 -#define reg_cfoe_ffoe_en_pos 0 -#define reg_cfoe_ffoe_en_len 1 -#define reg_cfoe_ffoe_en_lsb 0 -#define xd_p_reg_cfoe_ffoe_dis 0xA332 -#define reg_cfoe_ffoe_dis_pos 1 -#define reg_cfoe_ffoe_dis_len 1 -#define reg_cfoe_ffoe_dis_lsb 0 -#define xd_p_reg_cfoe_ffoe_rst 0xA332 -#define reg_cfoe_ffoe_rst_pos 2 -#define reg_cfoe_ffoe_rst_len 1 -#define reg_cfoe_ffoe_rst_lsb 0 -#define xd_p_reg_cfoe_ifoe_en 0xA332 -#define reg_cfoe_ifoe_en_pos 3 -#define reg_cfoe_ifoe_en_len 1 -#define reg_cfoe_ifoe_en_lsb 0 -#define xd_p_reg_cfoe_ifoe_dis 0xA332 -#define reg_cfoe_ifoe_dis_pos 4 -#define reg_cfoe_ifoe_dis_len 1 -#define reg_cfoe_ifoe_dis_lsb 0 -#define xd_p_reg_cfoe_ifoe_rst 0xA332 -#define reg_cfoe_ifoe_rst_pos 5 -#define reg_cfoe_ifoe_rst_len 1 -#define reg_cfoe_ifoe_rst_lsb 0 -#define xd_p_reg_cfoe_fot_en 0xA332 -#define reg_cfoe_fot_en_pos 6 -#define reg_cfoe_fot_en_len 1 -#define reg_cfoe_fot_en_lsb 0 -#define xd_p_reg_cfoe_fot_lm_en 0xA332 -#define reg_cfoe_fot_lm_en_pos 7 -#define reg_cfoe_fot_lm_en_len 1 -#define reg_cfoe_fot_lm_en_lsb 0 -#define xd_p_reg_cfoe_fot_rst 0xA333 -#define reg_cfoe_fot_rst_pos 0 -#define reg_cfoe_fot_rst_len 1 -#define reg_cfoe_fot_rst_lsb 0 -#define xd_r_fd_cfoe_ffoe_done 0xA333 -#define fd_cfoe_ffoe_done_pos 1 -#define fd_cfoe_ffoe_done_len 1 -#define fd_cfoe_ffoe_done_lsb 0 -#define xd_p_fd_cfoe_metric_vld 0xA333 -#define fd_cfoe_metric_vld_pos 2 -#define fd_cfoe_metric_vld_len 1 -#define fd_cfoe_metric_vld_lsb 0 -#define xd_p_reg_cfoe_ifod_vld 0xA333 -#define reg_cfoe_ifod_vld_pos 3 -#define reg_cfoe_ifod_vld_len 1 -#define reg_cfoe_ifod_vld_lsb 0 -#define xd_r_fd_cfoe_ifoe_done 0xA333 -#define fd_cfoe_ifoe_done_pos 4 -#define fd_cfoe_ifoe_done_len 1 -#define fd_cfoe_ifoe_done_lsb 0 -#define xd_r_fd_cfoe_fot_valid 0xA333 -#define fd_cfoe_fot_valid_pos 5 -#define fd_cfoe_fot_valid_len 1 -#define fd_cfoe_fot_valid_lsb 0 -#define xd_p_reg_cfoe_divg_int 0xA333 -#define reg_cfoe_divg_int_pos 6 -#define reg_cfoe_divg_int_len 1 -#define reg_cfoe_divg_int_lsb 0 -#define xd_r_reg_cfoe_divg_flag 0xA333 -#define reg_cfoe_divg_flag_pos 7 -#define reg_cfoe_divg_flag_len 1 -#define reg_cfoe_divg_flag_lsb 0 -#define xd_p_reg_sfoe_en 0xA334 -#define reg_sfoe_en_pos 0 -#define reg_sfoe_en_len 1 -#define reg_sfoe_en_lsb 0 -#define xd_p_reg_sfoe_dis 0xA334 -#define reg_sfoe_dis_pos 1 -#define reg_sfoe_dis_len 1 -#define reg_sfoe_dis_lsb 0 -#define xd_p_reg_sfoe_rst 0xA334 -#define reg_sfoe_rst_pos 2 -#define reg_sfoe_rst_len 1 -#define reg_sfoe_rst_lsb 0 -#define xd_p_reg_sfoe_vld_int 0xA334 -#define reg_sfoe_vld_int_pos 3 -#define reg_sfoe_vld_int_len 1 -#define reg_sfoe_vld_int_lsb 0 -#define xd_p_reg_sfoe_lm_en 0xA334 -#define reg_sfoe_lm_en_pos 4 -#define reg_sfoe_lm_en_len 1 -#define reg_sfoe_lm_en_lsb 0 -#define xd_p_reg_sfoe_divg_int 0xA334 -#define reg_sfoe_divg_int_pos 5 -#define reg_sfoe_divg_int_len 1 -#define reg_sfoe_divg_int_lsb 0 -#define xd_r_reg_sfoe_divg_flag 0xA334 -#define reg_sfoe_divg_flag_pos 6 -#define reg_sfoe_divg_flag_len 1 -#define reg_sfoe_divg_flag_lsb 0 -#define xd_p_reg_fft_rst 0xA335 -#define reg_fft_rst_pos 0 -#define reg_fft_rst_len 1 -#define reg_fft_rst_lsb 0 -#define xd_p_reg_fft_fast_beacon 0xA335 -#define reg_fft_fast_beacon_pos 1 -#define reg_fft_fast_beacon_len 1 -#define reg_fft_fast_beacon_lsb 0 -#define xd_p_reg_fft_fast_valid 0xA335 -#define reg_fft_fast_valid_pos 2 -#define reg_fft_fast_valid_len 1 -#define reg_fft_fast_valid_lsb 0 -#define xd_p_reg_fft_mask_en 0xA335 -#define reg_fft_mask_en_pos 3 -#define reg_fft_mask_en_len 1 -#define reg_fft_mask_en_lsb 0 -#define xd_p_reg_fft_crc_en 0xA335 -#define reg_fft_crc_en_pos 4 -#define reg_fft_crc_en_len 1 -#define reg_fft_crc_en_lsb 0 -#define xd_p_reg_finr_en 0xA336 -#define reg_finr_en_pos 0 -#define reg_finr_en_len 1 -#define reg_finr_en_lsb 0 -#define xd_p_fd_fste_en 0xA337 -#define fd_fste_en_pos 1 -#define fd_fste_en_len 1 -#define fd_fste_en_lsb 0 -#define xd_p_fd_sqi_tps_level_shift 0xA338 -#define fd_sqi_tps_level_shift_pos 0 -#define fd_sqi_tps_level_shift_len 8 -#define fd_sqi_tps_level_shift_lsb 0 -#define xd_p_fd_pilot_ma_len 0xA339 -#define fd_pilot_ma_len_pos 0 -#define fd_pilot_ma_len_len 6 -#define fd_pilot_ma_len_lsb 0 -#define xd_p_fd_tps_ma_len 0xA33A -#define fd_tps_ma_len_pos 0 -#define fd_tps_ma_len_len 6 -#define fd_tps_ma_len_lsb 0 -#define xd_p_fd_sqi_s3 0xA33B -#define fd_sqi_s3_pos 0 -#define fd_sqi_s3_len 8 -#define fd_sqi_s3_lsb 0 -#define xd_p_fd_sqi_dummy_reg_0 0xA33C -#define fd_sqi_dummy_reg_0_pos 0 -#define fd_sqi_dummy_reg_0_len 1 -#define fd_sqi_dummy_reg_0_lsb 0 -#define xd_p_fd_sqi_debug_sel 0xA33C -#define fd_sqi_debug_sel_pos 1 -#define fd_sqi_debug_sel_len 2 -#define fd_sqi_debug_sel_lsb 0 -#define xd_p_fd_sqi_s2 0xA33C -#define fd_sqi_s2_pos 3 -#define fd_sqi_s2_len 5 -#define fd_sqi_s2_lsb 0 -#define xd_p_fd_sqi_dummy_reg_1 0xA33D -#define fd_sqi_dummy_reg_1_pos 0 -#define fd_sqi_dummy_reg_1_len 1 -#define fd_sqi_dummy_reg_1_lsb 0 -#define xd_p_fd_inr_ignore 0xA33D -#define fd_inr_ignore_pos 1 -#define fd_inr_ignore_len 1 -#define fd_inr_ignore_lsb 0 -#define xd_p_fd_pilot_ignore 0xA33D -#define fd_pilot_ignore_pos 2 -#define fd_pilot_ignore_len 1 -#define fd_pilot_ignore_lsb 0 -#define xd_p_fd_etps_ignore 0xA33D -#define fd_etps_ignore_pos 3 -#define fd_etps_ignore_len 1 -#define fd_etps_ignore_lsb 0 -#define xd_p_fd_sqi_s1 0xA33D -#define fd_sqi_s1_pos 4 -#define fd_sqi_s1_len 4 -#define fd_sqi_s1_lsb 0 -#define xd_p_reg_fste_ehw_7_0 0xA33E -#define reg_fste_ehw_7_0_pos 0 -#define reg_fste_ehw_7_0_len 8 -#define reg_fste_ehw_7_0_lsb 0 -#define xd_p_reg_fste_ehw_9_8 0xA33F -#define reg_fste_ehw_9_8_pos 0 -#define reg_fste_ehw_9_8_len 2 -#define reg_fste_ehw_9_8_lsb 8 -#define xd_p_reg_fste_i_adj_vld 0xA33F -#define reg_fste_i_adj_vld_pos 2 -#define reg_fste_i_adj_vld_len 1 -#define reg_fste_i_adj_vld_lsb 0 -#define xd_p_reg_fste_phase_ini_7_0 0xA340 -#define reg_fste_phase_ini_7_0_pos 0 -#define reg_fste_phase_ini_7_0_len 8 -#define reg_fste_phase_ini_7_0_lsb 0 -#define xd_p_reg_fste_phase_ini_11_8 0xA341 -#define reg_fste_phase_ini_11_8_pos 0 -#define reg_fste_phase_ini_11_8_len 4 -#define reg_fste_phase_ini_11_8_lsb 8 -#define xd_p_reg_fste_phase_inc_3_0 0xA341 -#define reg_fste_phase_inc_3_0_pos 4 -#define reg_fste_phase_inc_3_0_len 4 -#define reg_fste_phase_inc_3_0_lsb 0 -#define xd_p_reg_fste_phase_inc_11_4 0xA342 -#define reg_fste_phase_inc_11_4_pos 0 -#define reg_fste_phase_inc_11_4_len 8 -#define reg_fste_phase_inc_11_4_lsb 4 -#define xd_p_reg_fste_acum_cost_cnt_max 0xA343 -#define reg_fste_acum_cost_cnt_max_pos 0 -#define reg_fste_acum_cost_cnt_max_len 4 -#define reg_fste_acum_cost_cnt_max_lsb 0 -#define xd_p_reg_fste_step_size_std 0xA343 -#define reg_fste_step_size_std_pos 4 -#define reg_fste_step_size_std_len 4 -#define reg_fste_step_size_std_lsb 0 -#define xd_p_reg_fste_step_size_max 0xA344 -#define reg_fste_step_size_max_pos 0 -#define reg_fste_step_size_max_len 4 -#define reg_fste_step_size_max_lsb 0 -#define xd_p_reg_fste_step_size_min 0xA344 -#define reg_fste_step_size_min_pos 4 -#define reg_fste_step_size_min_len 4 -#define reg_fste_step_size_min_lsb 0 -#define xd_p_reg_fste_frac_step_size_7_0 0xA345 -#define reg_fste_frac_step_size_7_0_pos 0 -#define reg_fste_frac_step_size_7_0_len 8 -#define reg_fste_frac_step_size_7_0_lsb 0 -#define xd_p_reg_fste_frac_step_size_15_8 0xA346 -#define reg_fste_frac_step_size_15_8_pos 0 -#define reg_fste_frac_step_size_15_8_len 8 -#define reg_fste_frac_step_size_15_8_lsb 8 -#define xd_p_reg_fste_frac_step_size_19_16 0xA347 -#define reg_fste_frac_step_size_19_16_pos 0 -#define reg_fste_frac_step_size_19_16_len 4 -#define reg_fste_frac_step_size_19_16_lsb 16 -#define xd_p_reg_fste_rpd_dir_cnt_max 0xA347 -#define reg_fste_rpd_dir_cnt_max_pos 4 -#define reg_fste_rpd_dir_cnt_max_len 4 -#define reg_fste_rpd_dir_cnt_max_lsb 0 -#define xd_p_reg_fste_ehs 0xA348 -#define reg_fste_ehs_pos 0 -#define reg_fste_ehs_len 4 -#define reg_fste_ehs_lsb 0 -#define xd_p_reg_fste_frac_cost_cnt_max_3_0 0xA348 -#define reg_fste_frac_cost_cnt_max_3_0_pos 4 -#define reg_fste_frac_cost_cnt_max_3_0_len 4 -#define reg_fste_frac_cost_cnt_max_3_0_lsb 0 -#define xd_p_reg_fste_frac_cost_cnt_max_9_4 0xA349 -#define reg_fste_frac_cost_cnt_max_9_4_pos 0 -#define reg_fste_frac_cost_cnt_max_9_4_len 6 -#define reg_fste_frac_cost_cnt_max_9_4_lsb 4 -#define xd_p_reg_fste_w0_7_0 0xA34A -#define reg_fste_w0_7_0_pos 0 -#define reg_fste_w0_7_0_len 8 -#define reg_fste_w0_7_0_lsb 0 -#define xd_p_reg_fste_w0_11_8 0xA34B -#define reg_fste_w0_11_8_pos 0 -#define reg_fste_w0_11_8_len 4 -#define reg_fste_w0_11_8_lsb 8 -#define xd_p_reg_fste_w1_3_0 0xA34B -#define reg_fste_w1_3_0_pos 4 -#define reg_fste_w1_3_0_len 4 -#define reg_fste_w1_3_0_lsb 0 -#define xd_p_reg_fste_w1_11_4 0xA34C -#define reg_fste_w1_11_4_pos 0 -#define reg_fste_w1_11_4_len 8 -#define reg_fste_w1_11_4_lsb 4 -#define xd_p_reg_fste_w2_7_0 0xA34D -#define reg_fste_w2_7_0_pos 0 -#define reg_fste_w2_7_0_len 8 -#define reg_fste_w2_7_0_lsb 0 -#define xd_p_reg_fste_w2_11_8 0xA34E -#define reg_fste_w2_11_8_pos 0 -#define reg_fste_w2_11_8_len 4 -#define reg_fste_w2_11_8_lsb 8 -#define xd_p_reg_fste_w3_3_0 0xA34E -#define reg_fste_w3_3_0_pos 4 -#define reg_fste_w3_3_0_len 4 -#define reg_fste_w3_3_0_lsb 0 -#define xd_p_reg_fste_w3_11_4 0xA34F -#define reg_fste_w3_11_4_pos 0 -#define reg_fste_w3_11_4_len 8 -#define reg_fste_w3_11_4_lsb 4 -#define xd_p_reg_fste_w4_7_0 0xA350 -#define reg_fste_w4_7_0_pos 0 -#define reg_fste_w4_7_0_len 8 -#define reg_fste_w4_7_0_lsb 0 -#define xd_p_reg_fste_w4_11_8 0xA351 -#define reg_fste_w4_11_8_pos 0 -#define reg_fste_w4_11_8_len 4 -#define reg_fste_w4_11_8_lsb 8 -#define xd_p_reg_fste_w5_3_0 0xA351 -#define reg_fste_w5_3_0_pos 4 -#define reg_fste_w5_3_0_len 4 -#define reg_fste_w5_3_0_lsb 0 -#define xd_p_reg_fste_w5_11_4 0xA352 -#define reg_fste_w5_11_4_pos 0 -#define reg_fste_w5_11_4_len 8 -#define reg_fste_w5_11_4_lsb 4 -#define xd_p_reg_fste_w6_7_0 0xA353 -#define reg_fste_w6_7_0_pos 0 -#define reg_fste_w6_7_0_len 8 -#define reg_fste_w6_7_0_lsb 0 -#define xd_p_reg_fste_w6_11_8 0xA354 -#define reg_fste_w6_11_8_pos 0 -#define reg_fste_w6_11_8_len 4 -#define reg_fste_w6_11_8_lsb 8 -#define xd_p_reg_fste_w7_3_0 0xA354 -#define reg_fste_w7_3_0_pos 4 -#define reg_fste_w7_3_0_len 4 -#define reg_fste_w7_3_0_lsb 0 -#define xd_p_reg_fste_w7_11_4 0xA355 -#define reg_fste_w7_11_4_pos 0 -#define reg_fste_w7_11_4_len 8 -#define reg_fste_w7_11_4_lsb 4 -#define xd_p_reg_fste_w8_7_0 0xA356 -#define reg_fste_w8_7_0_pos 0 -#define reg_fste_w8_7_0_len 8 -#define reg_fste_w8_7_0_lsb 0 -#define xd_p_reg_fste_w8_11_8 0xA357 -#define reg_fste_w8_11_8_pos 0 -#define reg_fste_w8_11_8_len 4 -#define reg_fste_w8_11_8_lsb 8 -#define xd_p_reg_fste_w9_3_0 0xA357 -#define reg_fste_w9_3_0_pos 4 -#define reg_fste_w9_3_0_len 4 -#define reg_fste_w9_3_0_lsb 0 -#define xd_p_reg_fste_w9_11_4 0xA358 -#define reg_fste_w9_11_4_pos 0 -#define reg_fste_w9_11_4_len 8 -#define reg_fste_w9_11_4_lsb 4 -#define xd_p_reg_fste_wa_7_0 0xA359 -#define reg_fste_wa_7_0_pos 0 -#define reg_fste_wa_7_0_len 8 -#define reg_fste_wa_7_0_lsb 0 -#define xd_p_reg_fste_wa_11_8 0xA35A -#define reg_fste_wa_11_8_pos 0 -#define reg_fste_wa_11_8_len 4 -#define reg_fste_wa_11_8_lsb 8 -#define xd_p_reg_fste_wb_3_0 0xA35A -#define reg_fste_wb_3_0_pos 4 -#define reg_fste_wb_3_0_len 4 -#define reg_fste_wb_3_0_lsb 0 -#define xd_p_reg_fste_wb_11_4 0xA35B -#define reg_fste_wb_11_4_pos 0 -#define reg_fste_wb_11_4_len 8 -#define reg_fste_wb_11_4_lsb 4 -#define xd_r_fd_fste_i_adj 0xA35C -#define fd_fste_i_adj_pos 0 -#define fd_fste_i_adj_len 5 -#define fd_fste_i_adj_lsb 0 -#define xd_r_fd_fste_f_adj_7_0 0xA35D -#define fd_fste_f_adj_7_0_pos 0 -#define fd_fste_f_adj_7_0_len 8 -#define fd_fste_f_adj_7_0_lsb 0 -#define xd_r_fd_fste_f_adj_15_8 0xA35E -#define fd_fste_f_adj_15_8_pos 0 -#define fd_fste_f_adj_15_8_len 8 -#define fd_fste_f_adj_15_8_lsb 8 -#define xd_r_fd_fste_f_adj_19_16 0xA35F -#define fd_fste_f_adj_19_16_pos 0 -#define fd_fste_f_adj_19_16_len 4 -#define fd_fste_f_adj_19_16_lsb 16 -#define xd_p_reg_feq_Leak_Bypass 0xA366 -#define reg_feq_Leak_Bypass_pos 0 -#define reg_feq_Leak_Bypass_len 1 -#define reg_feq_Leak_Bypass_lsb 0 -#define xd_p_reg_feq_Leak_Mneg1 0xA366 -#define reg_feq_Leak_Mneg1_pos 1 -#define reg_feq_Leak_Mneg1_len 3 -#define reg_feq_Leak_Mneg1_lsb 0 -#define xd_p_reg_feq_Leak_B_ShiftQ 0xA366 -#define reg_feq_Leak_B_ShiftQ_pos 4 -#define reg_feq_Leak_B_ShiftQ_len 4 -#define reg_feq_Leak_B_ShiftQ_lsb 0 -#define xd_p_reg_feq_Leak_B_Float0 0xA367 -#define reg_feq_Leak_B_Float0_pos 0 -#define reg_feq_Leak_B_Float0_len 8 -#define reg_feq_Leak_B_Float0_lsb 0 -#define xd_p_reg_feq_Leak_B_Float1 0xA368 -#define reg_feq_Leak_B_Float1_pos 0 -#define reg_feq_Leak_B_Float1_len 8 -#define reg_feq_Leak_B_Float1_lsb 0 -#define xd_p_reg_feq_Leak_B_Float2 0xA369 -#define reg_feq_Leak_B_Float2_pos 0 -#define reg_feq_Leak_B_Float2_len 8 -#define reg_feq_Leak_B_Float2_lsb 0 -#define xd_p_reg_feq_Leak_B_Float3 0xA36A -#define reg_feq_Leak_B_Float3_pos 0 -#define reg_feq_Leak_B_Float3_len 8 -#define reg_feq_Leak_B_Float3_lsb 0 -#define xd_p_reg_feq_Leak_B_Float4 0xA36B -#define reg_feq_Leak_B_Float4_pos 0 -#define reg_feq_Leak_B_Float4_len 8 -#define reg_feq_Leak_B_Float4_lsb 0 -#define xd_p_reg_feq_Leak_B_Float5 0xA36C -#define reg_feq_Leak_B_Float5_pos 0 -#define reg_feq_Leak_B_Float5_len 8 -#define reg_feq_Leak_B_Float5_lsb 0 -#define xd_p_reg_feq_Leak_B_Float6 0xA36D -#define reg_feq_Leak_B_Float6_pos 0 -#define reg_feq_Leak_B_Float6_len 8 -#define reg_feq_Leak_B_Float6_lsb 0 -#define xd_p_reg_feq_Leak_B_Float7 0xA36E -#define reg_feq_Leak_B_Float7_pos 0 -#define reg_feq_Leak_B_Float7_len 8 -#define reg_feq_Leak_B_Float7_lsb 0 -#define xd_r_reg_feq_data_h2_7_0 0xA36F -#define reg_feq_data_h2_7_0_pos 0 -#define reg_feq_data_h2_7_0_len 8 -#define reg_feq_data_h2_7_0_lsb 0 -#define xd_r_reg_feq_data_h2_9_8 0xA370 -#define reg_feq_data_h2_9_8_pos 0 -#define reg_feq_data_h2_9_8_len 2 -#define reg_feq_data_h2_9_8_lsb 8 -#define xd_p_reg_feq_leak_use_slice_tps 0xA371 -#define reg_feq_leak_use_slice_tps_pos 0 -#define reg_feq_leak_use_slice_tps_len 1 -#define reg_feq_leak_use_slice_tps_lsb 0 -#define xd_p_reg_feq_read_update 0xA371 -#define reg_feq_read_update_pos 1 -#define reg_feq_read_update_len 1 -#define reg_feq_read_update_lsb 0 -#define xd_p_reg_feq_data_vld 0xA371 -#define reg_feq_data_vld_pos 2 -#define reg_feq_data_vld_len 1 -#define reg_feq_data_vld_lsb 0 -#define xd_p_reg_feq_tone_idx_4_0 0xA371 -#define reg_feq_tone_idx_4_0_pos 3 -#define reg_feq_tone_idx_4_0_len 5 -#define reg_feq_tone_idx_4_0_lsb 0 -#define xd_p_reg_feq_tone_idx_12_5 0xA372 -#define reg_feq_tone_idx_12_5_pos 0 -#define reg_feq_tone_idx_12_5_len 8 -#define reg_feq_tone_idx_12_5_lsb 5 -#define xd_r_reg_feq_data_re_7_0 0xA373 -#define reg_feq_data_re_7_0_pos 0 -#define reg_feq_data_re_7_0_len 8 -#define reg_feq_data_re_7_0_lsb 0 -#define xd_r_reg_feq_data_re_10_8 0xA374 -#define reg_feq_data_re_10_8_pos 0 -#define reg_feq_data_re_10_8_len 3 -#define reg_feq_data_re_10_8_lsb 8 -#define xd_r_reg_feq_data_im_7_0 0xA375 -#define reg_feq_data_im_7_0_pos 0 -#define reg_feq_data_im_7_0_len 8 -#define reg_feq_data_im_7_0_lsb 0 -#define xd_r_reg_feq_data_im_10_8 0xA376 -#define reg_feq_data_im_10_8_pos 0 -#define reg_feq_data_im_10_8_len 3 -#define reg_feq_data_im_10_8_lsb 8 -#define xd_r_reg_feq_y_re 0xA377 -#define reg_feq_y_re_pos 0 -#define reg_feq_y_re_len 8 -#define reg_feq_y_re_lsb 0 -#define xd_r_reg_feq_y_im 0xA378 -#define reg_feq_y_im_pos 0 -#define reg_feq_y_im_len 8 -#define reg_feq_y_im_lsb 0 -#define xd_r_reg_feq_h_re_7_0 0xA379 -#define reg_feq_h_re_7_0_pos 0 -#define reg_feq_h_re_7_0_len 8 -#define reg_feq_h_re_7_0_lsb 0 -#define xd_r_reg_feq_h_re_8 0xA37A -#define reg_feq_h_re_8_pos 0 -#define reg_feq_h_re_8_len 1 -#define reg_feq_h_re_8_lsb 0 -#define xd_r_reg_feq_h_im_7_0 0xA37B -#define reg_feq_h_im_7_0_pos 0 -#define reg_feq_h_im_7_0_len 8 -#define reg_feq_h_im_7_0_lsb 0 -#define xd_r_reg_feq_h_im_8 0xA37C -#define reg_feq_h_im_8_pos 0 -#define reg_feq_h_im_8_len 1 -#define reg_feq_h_im_8_lsb 0 -#define xd_p_fec_super_frm_unit_7_0 0xA380 -#define fec_super_frm_unit_7_0_pos 0 -#define fec_super_frm_unit_7_0_len 8 -#define fec_super_frm_unit_7_0_lsb 0 -#define xd_p_fec_super_frm_unit_15_8 0xA381 -#define fec_super_frm_unit_15_8_pos 0 -#define fec_super_frm_unit_15_8_len 8 -#define fec_super_frm_unit_15_8_lsb 8 -#define xd_r_fec_vtb_err_bit_cnt_7_0 0xA382 -#define fec_vtb_err_bit_cnt_7_0_pos 0 -#define fec_vtb_err_bit_cnt_7_0_len 8 -#define fec_vtb_err_bit_cnt_7_0_lsb 0 -#define xd_r_fec_vtb_err_bit_cnt_15_8 0xA383 -#define fec_vtb_err_bit_cnt_15_8_pos 0 -#define fec_vtb_err_bit_cnt_15_8_len 8 -#define fec_vtb_err_bit_cnt_15_8_lsb 8 -#define xd_r_fec_vtb_err_bit_cnt_23_16 0xA384 -#define fec_vtb_err_bit_cnt_23_16_pos 0 -#define fec_vtb_err_bit_cnt_23_16_len 8 -#define fec_vtb_err_bit_cnt_23_16_lsb 16 -#define xd_p_fec_rsd_packet_unit_7_0 0xA385 -#define fec_rsd_packet_unit_7_0_pos 0 -#define fec_rsd_packet_unit_7_0_len 8 -#define fec_rsd_packet_unit_7_0_lsb 0 -#define xd_p_fec_rsd_packet_unit_15_8 0xA386 -#define fec_rsd_packet_unit_15_8_pos 0 -#define fec_rsd_packet_unit_15_8_len 8 -#define fec_rsd_packet_unit_15_8_lsb 8 -#define xd_r_fec_rsd_bit_err_cnt_7_0 0xA387 -#define fec_rsd_bit_err_cnt_7_0_pos 0 -#define fec_rsd_bit_err_cnt_7_0_len 8 -#define fec_rsd_bit_err_cnt_7_0_lsb 0 -#define xd_r_fec_rsd_bit_err_cnt_15_8 0xA388 -#define fec_rsd_bit_err_cnt_15_8_pos 0 -#define fec_rsd_bit_err_cnt_15_8_len 8 -#define fec_rsd_bit_err_cnt_15_8_lsb 8 -#define xd_r_fec_rsd_bit_err_cnt_23_16 0xA389 -#define fec_rsd_bit_err_cnt_23_16_pos 0 -#define fec_rsd_bit_err_cnt_23_16_len 8 -#define fec_rsd_bit_err_cnt_23_16_lsb 16 -#define xd_r_fec_rsd_abort_packet_cnt_7_0 0xA38A -#define fec_rsd_abort_packet_cnt_7_0_pos 0 -#define fec_rsd_abort_packet_cnt_7_0_len 8 -#define fec_rsd_abort_packet_cnt_7_0_lsb 0 -#define xd_r_fec_rsd_abort_packet_cnt_15_8 0xA38B -#define fec_rsd_abort_packet_cnt_15_8_pos 0 -#define fec_rsd_abort_packet_cnt_15_8_len 8 -#define fec_rsd_abort_packet_cnt_15_8_lsb 8 -#define xd_p_fec_RSD_PKT_NUM_PER_UNIT_7_0 0xA38C -#define fec_RSD_PKT_NUM_PER_UNIT_7_0_pos 0 -#define fec_RSD_PKT_NUM_PER_UNIT_7_0_len 8 -#define fec_RSD_PKT_NUM_PER_UNIT_7_0_lsb 0 -#define xd_p_fec_RSD_PKT_NUM_PER_UNIT_15_8 0xA38D -#define fec_RSD_PKT_NUM_PER_UNIT_15_8_pos 0 -#define fec_RSD_PKT_NUM_PER_UNIT_15_8_len 8 -#define fec_RSD_PKT_NUM_PER_UNIT_15_8_lsb 8 -#define xd_p_fec_RS_TH_1_7_0 0xA38E -#define fec_RS_TH_1_7_0_pos 0 -#define fec_RS_TH_1_7_0_len 8 -#define fec_RS_TH_1_7_0_lsb 0 -#define xd_p_fec_RS_TH_1_15_8 0xA38F -#define fec_RS_TH_1_15_8_pos 0 -#define fec_RS_TH_1_15_8_len 8 -#define fec_RS_TH_1_15_8_lsb 8 -#define xd_p_fec_RS_TH_2 0xA390 -#define fec_RS_TH_2_pos 0 -#define fec_RS_TH_2_len 8 -#define fec_RS_TH_2_lsb 0 -#define xd_p_fec_mon_en 0xA391 -#define fec_mon_en_pos 0 -#define fec_mon_en_len 1 -#define fec_mon_en_lsb 0 -#define xd_p_reg_b8to47 0xA391 -#define reg_b8to47_pos 1 -#define reg_b8to47_len 1 -#define reg_b8to47_lsb 0 -#define xd_p_reg_rsd_sync_rep 0xA391 -#define reg_rsd_sync_rep_pos 2 -#define reg_rsd_sync_rep_len 1 -#define reg_rsd_sync_rep_lsb 0 -#define xd_p_fec_rsd_retrain_rst 0xA391 -#define fec_rsd_retrain_rst_pos 3 -#define fec_rsd_retrain_rst_len 1 -#define fec_rsd_retrain_rst_lsb 0 -#define xd_r_fec_rsd_ber_rdy 0xA391 -#define fec_rsd_ber_rdy_pos 4 -#define fec_rsd_ber_rdy_len 1 -#define fec_rsd_ber_rdy_lsb 0 -#define xd_p_fec_rsd_ber_rst 0xA391 -#define fec_rsd_ber_rst_pos 5 -#define fec_rsd_ber_rst_len 1 -#define fec_rsd_ber_rst_lsb 0 -#define xd_r_fec_vtb_ber_rdy 0xA391 -#define fec_vtb_ber_rdy_pos 6 -#define fec_vtb_ber_rdy_len 1 -#define fec_vtb_ber_rdy_lsb 0 -#define xd_p_fec_vtb_ber_rst 0xA391 -#define fec_vtb_ber_rst_pos 7 -#define fec_vtb_ber_rst_len 1 -#define fec_vtb_ber_rst_lsb 0 -#define xd_p_reg_vtb_clk40en 0xA392 -#define reg_vtb_clk40en_pos 0 -#define reg_vtb_clk40en_len 1 -#define reg_vtb_clk40en_lsb 0 -#define xd_p_fec_vtb_rsd_mon_en 0xA392 -#define fec_vtb_rsd_mon_en_pos 1 -#define fec_vtb_rsd_mon_en_len 1 -#define fec_vtb_rsd_mon_en_lsb 0 -#define xd_p_reg_fec_data_en 0xA392 -#define reg_fec_data_en_pos 2 -#define reg_fec_data_en_len 1 -#define reg_fec_data_en_lsb 0 -#define xd_p_fec_dummy_reg_2 0xA392 -#define fec_dummy_reg_2_pos 3 -#define fec_dummy_reg_2_len 3 -#define fec_dummy_reg_2_lsb 0 -#define xd_p_reg_sync_chk 0xA392 -#define reg_sync_chk_pos 6 -#define reg_sync_chk_len 1 -#define reg_sync_chk_lsb 0 -#define xd_p_fec_rsd_bypass 0xA392 -#define fec_rsd_bypass_pos 7 -#define fec_rsd_bypass_len 1 -#define fec_rsd_bypass_lsb 0 -#define xd_p_fec_sw_rst 0xA393 -#define fec_sw_rst_pos 0 -#define fec_sw_rst_len 1 -#define fec_sw_rst_lsb 0 -#define xd_r_fec_vtb_pm_crc 0xA394 -#define fec_vtb_pm_crc_pos 0 -#define fec_vtb_pm_crc_len 8 -#define fec_vtb_pm_crc_lsb 0 -#define xd_r_fec_vtb_tb_7_crc 0xA395 -#define fec_vtb_tb_7_crc_pos 0 -#define fec_vtb_tb_7_crc_len 8 -#define fec_vtb_tb_7_crc_lsb 0 -#define xd_r_fec_vtb_tb_6_crc 0xA396 -#define fec_vtb_tb_6_crc_pos 0 -#define fec_vtb_tb_6_crc_len 8 -#define fec_vtb_tb_6_crc_lsb 0 -#define xd_r_fec_vtb_tb_5_crc 0xA397 -#define fec_vtb_tb_5_crc_pos 0 -#define fec_vtb_tb_5_crc_len 8 -#define fec_vtb_tb_5_crc_lsb 0 -#define xd_r_fec_vtb_tb_4_crc 0xA398 -#define fec_vtb_tb_4_crc_pos 0 -#define fec_vtb_tb_4_crc_len 8 -#define fec_vtb_tb_4_crc_lsb 0 -#define xd_r_fec_vtb_tb_3_crc 0xA399 -#define fec_vtb_tb_3_crc_pos 0 -#define fec_vtb_tb_3_crc_len 8 -#define fec_vtb_tb_3_crc_lsb 0 -#define xd_r_fec_vtb_tb_2_crc 0xA39A -#define fec_vtb_tb_2_crc_pos 0 -#define fec_vtb_tb_2_crc_len 8 -#define fec_vtb_tb_2_crc_lsb 0 -#define xd_r_fec_vtb_tb_1_crc 0xA39B -#define fec_vtb_tb_1_crc_pos 0 -#define fec_vtb_tb_1_crc_len 8 -#define fec_vtb_tb_1_crc_lsb 0 -#define xd_r_fec_vtb_tb_0_crc 0xA39C -#define fec_vtb_tb_0_crc_pos 0 -#define fec_vtb_tb_0_crc_len 8 -#define fec_vtb_tb_0_crc_lsb 0 -#define xd_r_fec_rsd_bank0_crc 0xA39D -#define fec_rsd_bank0_crc_pos 0 -#define fec_rsd_bank0_crc_len 8 -#define fec_rsd_bank0_crc_lsb 0 -#define xd_r_fec_rsd_bank1_crc 0xA39E -#define fec_rsd_bank1_crc_pos 0 -#define fec_rsd_bank1_crc_len 8 -#define fec_rsd_bank1_crc_lsb 0 -#define xd_r_fec_idi_vtb_crc 0xA39F -#define fec_idi_vtb_crc_pos 0 -#define fec_idi_vtb_crc_len 8 -#define fec_idi_vtb_crc_lsb 0 -#define xd_g_reg_tpsd_txmod 0xA3C0 -#define reg_tpsd_txmod_pos 0 -#define reg_tpsd_txmod_len 2 -#define reg_tpsd_txmod_lsb 0 -#define xd_g_reg_tpsd_gi 0xA3C0 -#define reg_tpsd_gi_pos 2 -#define reg_tpsd_gi_len 2 -#define reg_tpsd_gi_lsb 0 -#define xd_g_reg_tpsd_hier 0xA3C0 -#define reg_tpsd_hier_pos 4 -#define reg_tpsd_hier_len 3 -#define reg_tpsd_hier_lsb 0 -#define xd_g_reg_bw 0xA3C1 -#define reg_bw_pos 2 -#define reg_bw_len 2 -#define reg_bw_lsb 0 -#define xd_g_reg_dec_pri 0xA3C1 -#define reg_dec_pri_pos 4 -#define reg_dec_pri_len 1 -#define reg_dec_pri_lsb 0 -#define xd_g_reg_tpsd_const 0xA3C1 -#define reg_tpsd_const_pos 6 -#define reg_tpsd_const_len 2 -#define reg_tpsd_const_lsb 0 -#define xd_g_reg_tpsd_hpcr 0xA3C2 -#define reg_tpsd_hpcr_pos 0 -#define reg_tpsd_hpcr_len 3 -#define reg_tpsd_hpcr_lsb 0 -#define xd_g_reg_tpsd_lpcr 0xA3C2 -#define reg_tpsd_lpcr_pos 3 -#define reg_tpsd_lpcr_len 3 -#define reg_tpsd_lpcr_lsb 0 -#define xd_g_reg_ofsm_clk 0xA3D0 -#define reg_ofsm_clk_pos 0 -#define reg_ofsm_clk_len 3 -#define reg_ofsm_clk_lsb 0 -#define xd_g_reg_fclk_cfg 0xA3D1 -#define reg_fclk_cfg_pos 0 -#define reg_fclk_cfg_len 1 -#define reg_fclk_cfg_lsb 0 -#define xd_g_reg_fclk_idi 0xA3D1 -#define reg_fclk_idi_pos 1 -#define reg_fclk_idi_len 1 -#define reg_fclk_idi_lsb 0 -#define xd_g_reg_fclk_odi 0xA3D1 -#define reg_fclk_odi_pos 2 -#define reg_fclk_odi_len 1 -#define reg_fclk_odi_lsb 0 -#define xd_g_reg_fclk_rsd 0xA3D1 -#define reg_fclk_rsd_pos 3 -#define reg_fclk_rsd_len 1 -#define reg_fclk_rsd_lsb 0 -#define xd_g_reg_fclk_vtb 0xA3D1 -#define reg_fclk_vtb_pos 4 -#define reg_fclk_vtb_len 1 -#define reg_fclk_vtb_lsb 0 -#define xd_g_reg_fclk_cste 0xA3D1 -#define reg_fclk_cste_pos 5 -#define reg_fclk_cste_len 1 -#define reg_fclk_cste_lsb 0 -#define xd_g_reg_fclk_mp2if 0xA3D1 -#define reg_fclk_mp2if_pos 6 -#define reg_fclk_mp2if_len 1 -#define reg_fclk_mp2if_lsb 0 -#define xd_I2C_i2c_m_slave_addr 0xA400 -#define i2c_m_slave_addr_pos 0 -#define i2c_m_slave_addr_len 8 -#define i2c_m_slave_addr_lsb 0 -#define xd_I2C_i2c_m_data1 0xA401 -#define i2c_m_data1_pos 0 -#define i2c_m_data1_len 8 -#define i2c_m_data1_lsb 0 -#define xd_I2C_i2c_m_data2 0xA402 -#define i2c_m_data2_pos 0 -#define i2c_m_data2_len 8 -#define i2c_m_data2_lsb 0 -#define xd_I2C_i2c_m_data3 0xA403 -#define i2c_m_data3_pos 0 -#define i2c_m_data3_len 8 -#define i2c_m_data3_lsb 0 -#define xd_I2C_i2c_m_data4 0xA404 -#define i2c_m_data4_pos 0 -#define i2c_m_data4_len 8 -#define i2c_m_data4_lsb 0 -#define xd_I2C_i2c_m_data5 0xA405 -#define i2c_m_data5_pos 0 -#define i2c_m_data5_len 8 -#define i2c_m_data5_lsb 0 -#define xd_I2C_i2c_m_data6 0xA406 -#define i2c_m_data6_pos 0 -#define i2c_m_data6_len 8 -#define i2c_m_data6_lsb 0 -#define xd_I2C_i2c_m_data7 0xA407 -#define i2c_m_data7_pos 0 -#define i2c_m_data7_len 8 -#define i2c_m_data7_lsb 0 -#define xd_I2C_i2c_m_data8 0xA408 -#define i2c_m_data8_pos 0 -#define i2c_m_data8_len 8 -#define i2c_m_data8_lsb 0 -#define xd_I2C_i2c_m_data9 0xA409 -#define i2c_m_data9_pos 0 -#define i2c_m_data9_len 8 -#define i2c_m_data9_lsb 0 -#define xd_I2C_i2c_m_data10 0xA40A -#define i2c_m_data10_pos 0 -#define i2c_m_data10_len 8 -#define i2c_m_data10_lsb 0 -#define xd_I2C_i2c_m_data11 0xA40B -#define i2c_m_data11_pos 0 -#define i2c_m_data11_len 8 -#define i2c_m_data11_lsb 0 -#define xd_I2C_i2c_m_cmd_rw 0xA40C -#define i2c_m_cmd_rw_pos 0 -#define i2c_m_cmd_rw_len 1 -#define i2c_m_cmd_rw_lsb 0 -#define xd_I2C_i2c_m_cmd_rwlen 0xA40C -#define i2c_m_cmd_rwlen_pos 3 -#define i2c_m_cmd_rwlen_len 4 -#define i2c_m_cmd_rwlen_lsb 0 -#define xd_I2C_i2c_m_status_cmd_exe 0xA40D -#define i2c_m_status_cmd_exe_pos 0 -#define i2c_m_status_cmd_exe_len 1 -#define i2c_m_status_cmd_exe_lsb 0 -#define xd_I2C_i2c_m_status_wdat_done 0xA40D -#define i2c_m_status_wdat_done_pos 1 -#define i2c_m_status_wdat_done_len 1 -#define i2c_m_status_wdat_done_lsb 0 -#define xd_I2C_i2c_m_status_wdat_fail 0xA40D -#define i2c_m_status_wdat_fail_pos 2 -#define i2c_m_status_wdat_fail_len 1 -#define i2c_m_status_wdat_fail_lsb 0 -#define xd_I2C_i2c_m_period 0xA40E -#define i2c_m_period_pos 0 -#define i2c_m_period_len 8 -#define i2c_m_period_lsb 0 -#define xd_I2C_i2c_m_reg_msb_lsb 0xA40F -#define i2c_m_reg_msb_lsb_pos 0 -#define i2c_m_reg_msb_lsb_len 1 -#define i2c_m_reg_msb_lsb_lsb 0 -#define xd_I2C_reg_ofdm_rst 0xA40F -#define reg_ofdm_rst_pos 1 -#define reg_ofdm_rst_len 1 -#define reg_ofdm_rst_lsb 0 -#define xd_I2C_reg_sample_period_on_tuner 0xA40F -#define reg_sample_period_on_tuner_pos 2 -#define reg_sample_period_on_tuner_len 1 -#define reg_sample_period_on_tuner_lsb 0 -#define xd_I2C_reg_rst_i2c 0xA40F -#define reg_rst_i2c_pos 3 -#define reg_rst_i2c_len 1 -#define reg_rst_i2c_lsb 0 -#define xd_I2C_reg_ofdm_rst_en 0xA40F -#define reg_ofdm_rst_en_pos 4 -#define reg_ofdm_rst_en_len 1 -#define reg_ofdm_rst_en_lsb 0 -#define xd_I2C_reg_tuner_sda_sync_on 0xA40F -#define reg_tuner_sda_sync_on_pos 5 -#define reg_tuner_sda_sync_on_len 1 -#define reg_tuner_sda_sync_on_lsb 0 -#define xd_p_mp2if_data_access_disable_ofsm 0xA500 -#define mp2if_data_access_disable_ofsm_pos 0 -#define mp2if_data_access_disable_ofsm_len 1 -#define mp2if_data_access_disable_ofsm_lsb 0 -#define xd_p_reg_mp2_sw_rst_ofsm 0xA500 -#define reg_mp2_sw_rst_ofsm_pos 1 -#define reg_mp2_sw_rst_ofsm_len 1 -#define reg_mp2_sw_rst_ofsm_lsb 0 -#define xd_p_reg_mp2if_clk_en_ofsm 0xA500 -#define reg_mp2if_clk_en_ofsm_pos 2 -#define reg_mp2if_clk_en_ofsm_len 1 -#define reg_mp2if_clk_en_ofsm_lsb 0 -#define xd_r_mp2if_sync_byte_locked 0xA500 -#define mp2if_sync_byte_locked_pos 3 -#define mp2if_sync_byte_locked_len 1 -#define mp2if_sync_byte_locked_lsb 0 -#define xd_r_mp2if_ts_not_188 0xA500 -#define mp2if_ts_not_188_pos 4 -#define mp2if_ts_not_188_len 1 -#define mp2if_ts_not_188_lsb 0 -#define xd_r_mp2if_psb_empty 0xA500 -#define mp2if_psb_empty_pos 5 -#define mp2if_psb_empty_len 1 -#define mp2if_psb_empty_lsb 0 -#define xd_r_mp2if_psb_overflow 0xA500 -#define mp2if_psb_overflow_pos 6 -#define mp2if_psb_overflow_len 1 -#define mp2if_psb_overflow_lsb 0 -#define xd_p_mp2if_keep_sf_sync_byte_ofsm 0xA500 -#define mp2if_keep_sf_sync_byte_ofsm_pos 7 -#define mp2if_keep_sf_sync_byte_ofsm_len 1 -#define mp2if_keep_sf_sync_byte_ofsm_lsb 0 -#define xd_r_mp2if_psb_mp2if_num_pkt 0xA501 -#define mp2if_psb_mp2if_num_pkt_pos 0 -#define mp2if_psb_mp2if_num_pkt_len 6 -#define mp2if_psb_mp2if_num_pkt_lsb 0 -#define xd_p_reg_mpeg_full_speed_ofsm 0xA501 -#define reg_mpeg_full_speed_ofsm_pos 6 -#define reg_mpeg_full_speed_ofsm_len 1 -#define reg_mpeg_full_speed_ofsm_lsb 0 -#define xd_p_mp2if_mpeg_ser_mode_ofsm 0xA501 -#define mp2if_mpeg_ser_mode_ofsm_pos 7 -#define mp2if_mpeg_ser_mode_ofsm_len 1 -#define mp2if_mpeg_ser_mode_ofsm_lsb 0 -#define xd_p_reg_sw_mon51 0xA600 -#define reg_sw_mon51_pos 0 -#define reg_sw_mon51_len 8 -#define reg_sw_mon51_lsb 0 -#define xd_p_reg_top_pcsel 0xA601 -#define reg_top_pcsel_pos 0 -#define reg_top_pcsel_len 1 -#define reg_top_pcsel_lsb 0 -#define xd_p_reg_top_rs232 0xA601 -#define reg_top_rs232_pos 1 -#define reg_top_rs232_len 1 -#define reg_top_rs232_lsb 0 -#define xd_p_reg_top_pcout 0xA601 -#define reg_top_pcout_pos 2 -#define reg_top_pcout_len 1 -#define reg_top_pcout_lsb 0 -#define xd_p_reg_top_debug 0xA601 -#define reg_top_debug_pos 3 -#define reg_top_debug_len 1 -#define reg_top_debug_lsb 0 -#define xd_p_reg_top_adcdly 0xA601 -#define reg_top_adcdly_pos 4 -#define reg_top_adcdly_len 2 -#define reg_top_adcdly_lsb 0 -#define xd_p_reg_top_pwrdw 0xA601 -#define reg_top_pwrdw_pos 6 -#define reg_top_pwrdw_len 1 -#define reg_top_pwrdw_lsb 0 -#define xd_p_reg_top_pwrdw_inv 0xA601 -#define reg_top_pwrdw_inv_pos 7 -#define reg_top_pwrdw_inv_len 1 -#define reg_top_pwrdw_inv_lsb 0 -#define xd_p_reg_top_int_inv 0xA602 -#define reg_top_int_inv_pos 0 -#define reg_top_int_inv_len 1 -#define reg_top_int_inv_lsb 0 -#define xd_p_reg_top_dio_sel 0xA602 -#define reg_top_dio_sel_pos 1 -#define reg_top_dio_sel_len 1 -#define reg_top_dio_sel_lsb 0 -#define xd_p_reg_top_gpioon0 0xA603 -#define reg_top_gpioon0_pos 0 -#define reg_top_gpioon0_len 1 -#define reg_top_gpioon0_lsb 0 -#define xd_p_reg_top_gpioon1 0xA603 -#define reg_top_gpioon1_pos 1 -#define reg_top_gpioon1_len 1 -#define reg_top_gpioon1_lsb 0 -#define xd_p_reg_top_gpioon2 0xA603 -#define reg_top_gpioon2_pos 2 -#define reg_top_gpioon2_len 1 -#define reg_top_gpioon2_lsb 0 -#define xd_p_reg_top_gpioon3 0xA603 -#define reg_top_gpioon3_pos 3 -#define reg_top_gpioon3_len 1 -#define reg_top_gpioon3_lsb 0 -#define xd_p_reg_top_lockon1 0xA603 -#define reg_top_lockon1_pos 4 -#define reg_top_lockon1_len 1 -#define reg_top_lockon1_lsb 0 -#define xd_p_reg_top_lockon2 0xA603 -#define reg_top_lockon2_pos 5 -#define reg_top_lockon2_len 1 -#define reg_top_lockon2_lsb 0 -#define xd_p_reg_top_gpioo0 0xA604 -#define reg_top_gpioo0_pos 0 -#define reg_top_gpioo0_len 1 -#define reg_top_gpioo0_lsb 0 -#define xd_p_reg_top_gpioo1 0xA604 -#define reg_top_gpioo1_pos 1 -#define reg_top_gpioo1_len 1 -#define reg_top_gpioo1_lsb 0 -#define xd_p_reg_top_gpioo2 0xA604 -#define reg_top_gpioo2_pos 2 -#define reg_top_gpioo2_len 1 -#define reg_top_gpioo2_lsb 0 -#define xd_p_reg_top_gpioo3 0xA604 -#define reg_top_gpioo3_pos 3 -#define reg_top_gpioo3_len 1 -#define reg_top_gpioo3_lsb 0 -#define xd_p_reg_top_lock1 0xA604 -#define reg_top_lock1_pos 4 -#define reg_top_lock1_len 1 -#define reg_top_lock1_lsb 0 -#define xd_p_reg_top_lock2 0xA604 -#define reg_top_lock2_pos 5 -#define reg_top_lock2_len 1 -#define reg_top_lock2_lsb 0 -#define xd_p_reg_top_gpioen0 0xA605 -#define reg_top_gpioen0_pos 0 -#define reg_top_gpioen0_len 1 -#define reg_top_gpioen0_lsb 0 -#define xd_p_reg_top_gpioen1 0xA605 -#define reg_top_gpioen1_pos 1 -#define reg_top_gpioen1_len 1 -#define reg_top_gpioen1_lsb 0 -#define xd_p_reg_top_gpioen2 0xA605 -#define reg_top_gpioen2_pos 2 -#define reg_top_gpioen2_len 1 -#define reg_top_gpioen2_lsb 0 -#define xd_p_reg_top_gpioen3 0xA605 -#define reg_top_gpioen3_pos 3 -#define reg_top_gpioen3_len 1 -#define reg_top_gpioen3_lsb 0 -#define xd_p_reg_top_locken1 0xA605 -#define reg_top_locken1_pos 4 -#define reg_top_locken1_len 1 -#define reg_top_locken1_lsb 0 -#define xd_p_reg_top_locken2 0xA605 -#define reg_top_locken2_pos 5 -#define reg_top_locken2_len 1 -#define reg_top_locken2_lsb 0 -#define xd_r_reg_top_gpioi0 0xA606 -#define reg_top_gpioi0_pos 0 -#define reg_top_gpioi0_len 1 -#define reg_top_gpioi0_lsb 0 -#define xd_r_reg_top_gpioi1 0xA606 -#define reg_top_gpioi1_pos 1 -#define reg_top_gpioi1_len 1 -#define reg_top_gpioi1_lsb 0 -#define xd_r_reg_top_gpioi2 0xA606 -#define reg_top_gpioi2_pos 2 -#define reg_top_gpioi2_len 1 -#define reg_top_gpioi2_lsb 0 -#define xd_r_reg_top_gpioi3 0xA606 -#define reg_top_gpioi3_pos 3 -#define reg_top_gpioi3_len 1 -#define reg_top_gpioi3_lsb 0 -#define xd_r_reg_top_locki1 0xA606 -#define reg_top_locki1_pos 4 -#define reg_top_locki1_len 1 -#define reg_top_locki1_lsb 0 -#define xd_r_reg_top_locki2 0xA606 -#define reg_top_locki2_pos 5 -#define reg_top_locki2_len 1 -#define reg_top_locki2_lsb 0 -#define xd_p_reg_dummy_7_0 0xA608 -#define reg_dummy_7_0_pos 0 -#define reg_dummy_7_0_len 8 -#define reg_dummy_7_0_lsb 0 -#define xd_p_reg_dummy_15_8 0xA609 -#define reg_dummy_15_8_pos 0 -#define reg_dummy_15_8_len 8 -#define reg_dummy_15_8_lsb 8 -#define xd_p_reg_dummy_23_16 0xA60A -#define reg_dummy_23_16_pos 0 -#define reg_dummy_23_16_len 8 -#define reg_dummy_23_16_lsb 16 -#define xd_p_reg_dummy_31_24 0xA60B -#define reg_dummy_31_24_pos 0 -#define reg_dummy_31_24_len 8 -#define reg_dummy_31_24_lsb 24 -#define xd_p_reg_dummy_39_32 0xA60C -#define reg_dummy_39_32_pos 0 -#define reg_dummy_39_32_len 8 -#define reg_dummy_39_32_lsb 32 -#define xd_p_reg_dummy_47_40 0xA60D -#define reg_dummy_47_40_pos 0 -#define reg_dummy_47_40_len 8 -#define reg_dummy_47_40_lsb 40 -#define xd_p_reg_dummy_55_48 0xA60E -#define reg_dummy_55_48_pos 0 -#define reg_dummy_55_48_len 8 -#define reg_dummy_55_48_lsb 48 -#define xd_p_reg_dummy_63_56 0xA60F -#define reg_dummy_63_56_pos 0 -#define reg_dummy_63_56_len 8 -#define reg_dummy_63_56_lsb 56 -#define xd_p_reg_dummy_71_64 0xA610 -#define reg_dummy_71_64_pos 0 -#define reg_dummy_71_64_len 8 -#define reg_dummy_71_64_lsb 64 -#define xd_p_reg_dummy_79_72 0xA611 -#define reg_dummy_79_72_pos 0 -#define reg_dummy_79_72_len 8 -#define reg_dummy_79_72_lsb 72 -#define xd_p_reg_dummy_87_80 0xA612 -#define reg_dummy_87_80_pos 0 -#define reg_dummy_87_80_len 8 -#define reg_dummy_87_80_lsb 80 -#define xd_p_reg_dummy_95_88 0xA613 -#define reg_dummy_95_88_pos 0 -#define reg_dummy_95_88_len 8 -#define reg_dummy_95_88_lsb 88 -#define xd_p_reg_dummy_103_96 0xA614 -#define reg_dummy_103_96_pos 0 -#define reg_dummy_103_96_len 8 -#define reg_dummy_103_96_lsb 96 - -#define xd_p_reg_unplug_flag 0xA615 -#define reg_unplug_flag_pos 0 -#define reg_unplug_flag_len 1 -#define reg_unplug_flag_lsb 104 - -#define xd_p_reg_api_dca_stes_request 0xA615 -#define reg_api_dca_stes_request_pos 1 -#define reg_api_dca_stes_request_len 1 -#define reg_api_dca_stes_request_lsb 0 - -#define xd_p_reg_back_to_dca_flag 0xA615 -#define reg_back_to_dca_flag_pos 2 -#define reg_back_to_dca_flag_len 1 -#define reg_back_to_dca_flag_lsb 106 - -#define xd_p_reg_api_retrain_request 0xA615 -#define reg_api_retrain_request_pos 3 -#define reg_api_retrain_request_len 1 -#define reg_api_retrain_request_lsb 0 - -#define xd_p_reg_Dyn_Top_Try_flag 0xA615 -#define reg_Dyn_Top_Try_flag_pos 3 -#define reg_Dyn_Top_Try_flag_len 1 -#define reg_Dyn_Top_Try_flag_lsb 107 - -#define xd_p_reg_API_retrain_freeze_flag 0xA615 -#define reg_API_retrain_freeze_flag_pos 4 -#define reg_API_retrain_freeze_flag_len 1 -#define reg_API_retrain_freeze_flag_lsb 108 - -#define xd_p_reg_dummy_111_104 0xA615 -#define reg_dummy_111_104_pos 0 -#define reg_dummy_111_104_len 8 -#define reg_dummy_111_104_lsb 104 -#define xd_p_reg_dummy_119_112 0xA616 -#define reg_dummy_119_112_pos 0 -#define reg_dummy_119_112_len 8 -#define reg_dummy_119_112_lsb 112 -#define xd_p_reg_dummy_127_120 0xA617 -#define reg_dummy_127_120_pos 0 -#define reg_dummy_127_120_len 8 -#define reg_dummy_127_120_lsb 120 -#define xd_p_reg_dummy_135_128 0xA618 -#define reg_dummy_135_128_pos 0 -#define reg_dummy_135_128_len 8 -#define reg_dummy_135_128_lsb 128 - -#define xd_p_reg_dummy_143_136 0xA619 -#define reg_dummy_143_136_pos 0 -#define reg_dummy_143_136_len 8 -#define reg_dummy_143_136_lsb 136 - -#define xd_p_reg_CCIR_dis 0xA619 -#define reg_CCIR_dis_pos 0 -#define reg_CCIR_dis_len 1 -#define reg_CCIR_dis_lsb 0 - -#define xd_p_reg_dummy_151_144 0xA61A -#define reg_dummy_151_144_pos 0 -#define reg_dummy_151_144_len 8 -#define reg_dummy_151_144_lsb 144 - -#define xd_p_reg_dummy_159_152 0xA61B -#define reg_dummy_159_152_pos 0 -#define reg_dummy_159_152_len 8 -#define reg_dummy_159_152_lsb 152 - -#define xd_p_reg_dummy_167_160 0xA61C -#define reg_dummy_167_160_pos 0 -#define reg_dummy_167_160_len 8 -#define reg_dummy_167_160_lsb 160 - -#define xd_p_reg_dummy_175_168 0xA61D -#define reg_dummy_175_168_pos 0 -#define reg_dummy_175_168_len 8 -#define reg_dummy_175_168_lsb 168 - -#define xd_p_reg_dummy_183_176 0xA61E -#define reg_dummy_183_176_pos 0 -#define reg_dummy_183_176_len 8 -#define reg_dummy_183_176_lsb 176 - -#define xd_p_reg_ofsm_read_rbc_en 0xA61E -#define reg_ofsm_read_rbc_en_pos 2 -#define reg_ofsm_read_rbc_en_len 1 -#define reg_ofsm_read_rbc_en_lsb 0 - -#define xd_p_reg_ce_filter_selection_dis 0xA61E -#define reg_ce_filter_selection_dis_pos 1 -#define reg_ce_filter_selection_dis_len 1 -#define reg_ce_filter_selection_dis_lsb 0 - -#define xd_p_reg_OFSM_version_control_7_0 0xA611 -#define reg_OFSM_version_control_7_0_pos 0 -#define reg_OFSM_version_control_7_0_len 8 -#define reg_OFSM_version_control_7_0_lsb 0 - -#define xd_p_reg_OFSM_version_control_15_8 0xA61F -#define reg_OFSM_version_control_15_8_pos 0 -#define reg_OFSM_version_control_15_8_len 8 -#define reg_OFSM_version_control_15_8_lsb 0 - -#define xd_p_reg_OFSM_version_control_23_16 0xA620 -#define reg_OFSM_version_control_23_16_pos 0 -#define reg_OFSM_version_control_23_16_len 8 -#define reg_OFSM_version_control_23_16_lsb 0 - -#define xd_p_reg_dummy_191_184 0xA61F -#define reg_dummy_191_184_pos 0 -#define reg_dummy_191_184_len 8 -#define reg_dummy_191_184_lsb 184 - -#define xd_p_reg_dummy_199_192 0xA620 -#define reg_dummy_199_192_pos 0 -#define reg_dummy_199_192_len 8 -#define reg_dummy_199_192_lsb 192 - -#define xd_p_reg_ce_en 0xABC0 -#define reg_ce_en_pos 0 -#define reg_ce_en_len 1 -#define reg_ce_en_lsb 0 -#define xd_p_reg_ce_fctrl_en 0xABC0 -#define reg_ce_fctrl_en_pos 1 -#define reg_ce_fctrl_en_len 1 -#define reg_ce_fctrl_en_lsb 0 -#define xd_p_reg_ce_fste_tdi 0xABC0 -#define reg_ce_fste_tdi_pos 2 -#define reg_ce_fste_tdi_len 1 -#define reg_ce_fste_tdi_lsb 0 -#define xd_p_reg_ce_dynamic 0xABC0 -#define reg_ce_dynamic_pos 3 -#define reg_ce_dynamic_len 1 -#define reg_ce_dynamic_lsb 0 -#define xd_p_reg_ce_conf 0xABC0 -#define reg_ce_conf_pos 4 -#define reg_ce_conf_len 2 -#define reg_ce_conf_lsb 0 -#define xd_p_reg_ce_dyn12 0xABC0 -#define reg_ce_dyn12_pos 6 -#define reg_ce_dyn12_len 1 -#define reg_ce_dyn12_lsb 0 -#define xd_p_reg_ce_derot_en 0xABC0 -#define reg_ce_derot_en_pos 7 -#define reg_ce_derot_en_len 1 -#define reg_ce_derot_en_lsb 0 -#define xd_p_reg_ce_dynamic_th_7_0 0xABC1 -#define reg_ce_dynamic_th_7_0_pos 0 -#define reg_ce_dynamic_th_7_0_len 8 -#define reg_ce_dynamic_th_7_0_lsb 0 -#define xd_p_reg_ce_dynamic_th_15_8 0xABC2 -#define reg_ce_dynamic_th_15_8_pos 0 -#define reg_ce_dynamic_th_15_8_len 8 -#define reg_ce_dynamic_th_15_8_lsb 8 -#define xd_p_reg_ce_s1 0xABC3 -#define reg_ce_s1_pos 0 -#define reg_ce_s1_len 5 -#define reg_ce_s1_lsb 0 -#define xd_p_reg_ce_var_forced_value 0xABC3 -#define reg_ce_var_forced_value_pos 5 -#define reg_ce_var_forced_value_len 3 -#define reg_ce_var_forced_value_lsb 0 -#define xd_p_reg_ce_data_im_7_0 0xABC4 -#define reg_ce_data_im_7_0_pos 0 -#define reg_ce_data_im_7_0_len 8 -#define reg_ce_data_im_7_0_lsb 0 -#define xd_p_reg_ce_data_im_8 0xABC5 -#define reg_ce_data_im_8_pos 0 -#define reg_ce_data_im_8_len 1 -#define reg_ce_data_im_8_lsb 0 -#define xd_p_reg_ce_data_re_6_0 0xABC5 -#define reg_ce_data_re_6_0_pos 1 -#define reg_ce_data_re_6_0_len 7 -#define reg_ce_data_re_6_0_lsb 0 -#define xd_p_reg_ce_data_re_8_7 0xABC6 -#define reg_ce_data_re_8_7_pos 0 -#define reg_ce_data_re_8_7_len 2 -#define reg_ce_data_re_8_7_lsb 7 -#define xd_p_reg_ce_tone_5_0 0xABC6 -#define reg_ce_tone_5_0_pos 2 -#define reg_ce_tone_5_0_len 6 -#define reg_ce_tone_5_0_lsb 0 -#define xd_p_reg_ce_tone_12_6 0xABC7 -#define reg_ce_tone_12_6_pos 0 -#define reg_ce_tone_12_6_len 7 -#define reg_ce_tone_12_6_lsb 6 -#define xd_p_reg_ce_centroid_drift_th 0xABC8 -#define reg_ce_centroid_drift_th_pos 0 -#define reg_ce_centroid_drift_th_len 8 -#define reg_ce_centroid_drift_th_lsb 0 -#define xd_p_reg_ce_centroid_count_max 0xABC9 -#define reg_ce_centroid_count_max_pos 0 -#define reg_ce_centroid_count_max_len 4 -#define reg_ce_centroid_count_max_lsb 0 -#define xd_p_reg_ce_centroid_bias_inc_7_0 0xABCA -#define reg_ce_centroid_bias_inc_7_0_pos 0 -#define reg_ce_centroid_bias_inc_7_0_len 8 -#define reg_ce_centroid_bias_inc_7_0_lsb 0 -#define xd_p_reg_ce_centroid_bias_inc_8 0xABCB -#define reg_ce_centroid_bias_inc_8_pos 0 -#define reg_ce_centroid_bias_inc_8_len 1 -#define reg_ce_centroid_bias_inc_8_lsb 0 -#define xd_p_reg_ce_var_th0_7_0 0xABCC -#define reg_ce_var_th0_7_0_pos 0 -#define reg_ce_var_th0_7_0_len 8 -#define reg_ce_var_th0_7_0_lsb 0 -#define xd_p_reg_ce_var_th0_15_8 0xABCD -#define reg_ce_var_th0_15_8_pos 0 -#define reg_ce_var_th0_15_8_len 8 -#define reg_ce_var_th0_15_8_lsb 8 -#define xd_p_reg_ce_var_th1_7_0 0xABCE -#define reg_ce_var_th1_7_0_pos 0 -#define reg_ce_var_th1_7_0_len 8 -#define reg_ce_var_th1_7_0_lsb 0 -#define xd_p_reg_ce_var_th1_15_8 0xABCF -#define reg_ce_var_th1_15_8_pos 0 -#define reg_ce_var_th1_15_8_len 8 -#define reg_ce_var_th1_15_8_lsb 8 -#define xd_p_reg_ce_var_th2_7_0 0xABD0 -#define reg_ce_var_th2_7_0_pos 0 -#define reg_ce_var_th2_7_0_len 8 -#define reg_ce_var_th2_7_0_lsb 0 -#define xd_p_reg_ce_var_th2_15_8 0xABD1 -#define reg_ce_var_th2_15_8_pos 0 -#define reg_ce_var_th2_15_8_len 8 -#define reg_ce_var_th2_15_8_lsb 8 -#define xd_p_reg_ce_var_th3_7_0 0xABD2 -#define reg_ce_var_th3_7_0_pos 0 -#define reg_ce_var_th3_7_0_len 8 -#define reg_ce_var_th3_7_0_lsb 0 -#define xd_p_reg_ce_var_th3_15_8 0xABD3 -#define reg_ce_var_th3_15_8_pos 0 -#define reg_ce_var_th3_15_8_len 8 -#define reg_ce_var_th3_15_8_lsb 8 -#define xd_p_reg_ce_var_th4_7_0 0xABD4 -#define reg_ce_var_th4_7_0_pos 0 -#define reg_ce_var_th4_7_0_len 8 -#define reg_ce_var_th4_7_0_lsb 0 -#define xd_p_reg_ce_var_th4_15_8 0xABD5 -#define reg_ce_var_th4_15_8_pos 0 -#define reg_ce_var_th4_15_8_len 8 -#define reg_ce_var_th4_15_8_lsb 8 -#define xd_p_reg_ce_var_th5_7_0 0xABD6 -#define reg_ce_var_th5_7_0_pos 0 -#define reg_ce_var_th5_7_0_len 8 -#define reg_ce_var_th5_7_0_lsb 0 -#define xd_p_reg_ce_var_th5_15_8 0xABD7 -#define reg_ce_var_th5_15_8_pos 0 -#define reg_ce_var_th5_15_8_len 8 -#define reg_ce_var_th5_15_8_lsb 8 -#define xd_p_reg_ce_var_th6_7_0 0xABD8 -#define reg_ce_var_th6_7_0_pos 0 -#define reg_ce_var_th6_7_0_len 8 -#define reg_ce_var_th6_7_0_lsb 0 -#define xd_p_reg_ce_var_th6_15_8 0xABD9 -#define reg_ce_var_th6_15_8_pos 0 -#define reg_ce_var_th6_15_8_len 8 -#define reg_ce_var_th6_15_8_lsb 8 -#define xd_p_reg_ce_fctrl_reset 0xABDA -#define reg_ce_fctrl_reset_pos 0 -#define reg_ce_fctrl_reset_len 1 -#define reg_ce_fctrl_reset_lsb 0 -#define xd_p_reg_ce_cent_auto_clr_en 0xABDA -#define reg_ce_cent_auto_clr_en_pos 1 -#define reg_ce_cent_auto_clr_en_len 1 -#define reg_ce_cent_auto_clr_en_lsb 0 -#define xd_p_reg_ce_fctrl_auto_reset_en 0xABDA -#define reg_ce_fctrl_auto_reset_en_pos 2 -#define reg_ce_fctrl_auto_reset_en_len 1 -#define reg_ce_fctrl_auto_reset_en_lsb 0 -#define xd_p_reg_ce_var_forced_en 0xABDA -#define reg_ce_var_forced_en_pos 3 -#define reg_ce_var_forced_en_len 1 -#define reg_ce_var_forced_en_lsb 0 -#define xd_p_reg_ce_cent_forced_en 0xABDA -#define reg_ce_cent_forced_en_pos 4 -#define reg_ce_cent_forced_en_len 1 -#define reg_ce_cent_forced_en_lsb 0 -#define xd_p_reg_ce_var_max 0xABDA -#define reg_ce_var_max_pos 5 -#define reg_ce_var_max_len 3 -#define reg_ce_var_max_lsb 0 -#define xd_p_reg_ce_cent_forced_value_7_0 0xABDB -#define reg_ce_cent_forced_value_7_0_pos 0 -#define reg_ce_cent_forced_value_7_0_len 8 -#define reg_ce_cent_forced_value_7_0_lsb 0 -#define xd_p_reg_ce_cent_forced_value_11_8 0xABDC -#define reg_ce_cent_forced_value_11_8_pos 0 -#define reg_ce_cent_forced_value_11_8_len 4 -#define reg_ce_cent_forced_value_11_8_lsb 8 -#define xd_p_reg_ce_fctrl_rd 0xABDD -#define reg_ce_fctrl_rd_pos 0 -#define reg_ce_fctrl_rd_len 1 -#define reg_ce_fctrl_rd_lsb 0 -#define xd_p_reg_ce_centroid_max_6_0 0xABDD -#define reg_ce_centroid_max_6_0_pos 1 -#define reg_ce_centroid_max_6_0_len 7 -#define reg_ce_centroid_max_6_0_lsb 0 -#define xd_p_reg_ce_centroid_max_11_7 0xABDE -#define reg_ce_centroid_max_11_7_pos 0 -#define reg_ce_centroid_max_11_7_len 5 -#define reg_ce_centroid_max_11_7_lsb 7 -#define xd_p_reg_ce_var 0xABDF -#define reg_ce_var_pos 0 -#define reg_ce_var_len 3 -#define reg_ce_var_lsb 0 -#define xd_p_reg_ce_fctrl_rdy 0xABDF -#define reg_ce_fctrl_rdy_pos 3 -#define reg_ce_fctrl_rdy_len 1 -#define reg_ce_fctrl_rdy_lsb 0 -#define xd_p_reg_ce_centroid_out_3_0 0xABDF -#define reg_ce_centroid_out_3_0_pos 4 -#define reg_ce_centroid_out_3_0_len 4 -#define reg_ce_centroid_out_3_0_lsb 0 -#define xd_p_reg_ce_centroid_out_11_4 0xABE0 -#define reg_ce_centroid_out_11_4_pos 0 -#define reg_ce_centroid_out_11_4_len 8 -#define reg_ce_centroid_out_11_4_lsb 4 -#define xd_p_reg_ce_bias_7_0 0xABE1 -#define reg_ce_bias_7_0_pos 0 -#define reg_ce_bias_7_0_len 8 -#define reg_ce_bias_7_0_lsb 0 -#define xd_p_reg_ce_bias_11_8 0xABE2 -#define reg_ce_bias_11_8_pos 0 -#define reg_ce_bias_11_8_len 4 -#define reg_ce_bias_11_8_lsb 8 -#define xd_p_reg_ce_m1_3_0 0xABE2 -#define reg_ce_m1_3_0_pos 4 -#define reg_ce_m1_3_0_len 4 -#define reg_ce_m1_3_0_lsb 0 -#define xd_p_reg_ce_m1_11_4 0xABE3 -#define reg_ce_m1_11_4_pos 0 -#define reg_ce_m1_11_4_len 8 -#define reg_ce_m1_11_4_lsb 4 -#define xd_p_reg_ce_rh0_7_0 0xABE4 -#define reg_ce_rh0_7_0_pos 0 -#define reg_ce_rh0_7_0_len 8 -#define reg_ce_rh0_7_0_lsb 0 -#define xd_p_reg_ce_rh0_15_8 0xABE5 -#define reg_ce_rh0_15_8_pos 0 -#define reg_ce_rh0_15_8_len 8 -#define reg_ce_rh0_15_8_lsb 8 -#define xd_p_reg_ce_rh0_23_16 0xABE6 -#define reg_ce_rh0_23_16_pos 0 -#define reg_ce_rh0_23_16_len 8 -#define reg_ce_rh0_23_16_lsb 16 -#define xd_p_reg_ce_rh0_31_24 0xABE7 -#define reg_ce_rh0_31_24_pos 0 -#define reg_ce_rh0_31_24_len 8 -#define reg_ce_rh0_31_24_lsb 24 -#define xd_p_reg_ce_rh3_real_7_0 0xABE8 -#define reg_ce_rh3_real_7_0_pos 0 -#define reg_ce_rh3_real_7_0_len 8 -#define reg_ce_rh3_real_7_0_lsb 0 -#define xd_p_reg_ce_rh3_real_15_8 0xABE9 -#define reg_ce_rh3_real_15_8_pos 0 -#define reg_ce_rh3_real_15_8_len 8 -#define reg_ce_rh3_real_15_8_lsb 8 -#define xd_p_reg_ce_rh3_real_23_16 0xABEA -#define reg_ce_rh3_real_23_16_pos 0 -#define reg_ce_rh3_real_23_16_len 8 -#define reg_ce_rh3_real_23_16_lsb 16 -#define xd_p_reg_ce_rh3_real_31_24 0xABEB -#define reg_ce_rh3_real_31_24_pos 0 -#define reg_ce_rh3_real_31_24_len 8 -#define reg_ce_rh3_real_31_24_lsb 24 -#define xd_p_reg_ce_rh3_imag_7_0 0xABEC -#define reg_ce_rh3_imag_7_0_pos 0 -#define reg_ce_rh3_imag_7_0_len 8 -#define reg_ce_rh3_imag_7_0_lsb 0 -#define xd_p_reg_ce_rh3_imag_15_8 0xABED -#define reg_ce_rh3_imag_15_8_pos 0 -#define reg_ce_rh3_imag_15_8_len 8 -#define reg_ce_rh3_imag_15_8_lsb 8 -#define xd_p_reg_ce_rh3_imag_23_16 0xABEE -#define reg_ce_rh3_imag_23_16_pos 0 -#define reg_ce_rh3_imag_23_16_len 8 -#define reg_ce_rh3_imag_23_16_lsb 16 -#define xd_p_reg_ce_rh3_imag_31_24 0xABEF -#define reg_ce_rh3_imag_31_24_pos 0 -#define reg_ce_rh3_imag_31_24_len 8 -#define reg_ce_rh3_imag_31_24_lsb 24 -#define xd_p_reg_feq_fix_eh2_7_0 0xABF0 -#define reg_feq_fix_eh2_7_0_pos 0 -#define reg_feq_fix_eh2_7_0_len 8 -#define reg_feq_fix_eh2_7_0_lsb 0 -#define xd_p_reg_feq_fix_eh2_15_8 0xABF1 -#define reg_feq_fix_eh2_15_8_pos 0 -#define reg_feq_fix_eh2_15_8_len 8 -#define reg_feq_fix_eh2_15_8_lsb 8 -#define xd_p_reg_feq_fix_eh2_23_16 0xABF2 -#define reg_feq_fix_eh2_23_16_pos 0 -#define reg_feq_fix_eh2_23_16_len 8 -#define reg_feq_fix_eh2_23_16_lsb 16 -#define xd_p_reg_feq_fix_eh2_31_24 0xABF3 -#define reg_feq_fix_eh2_31_24_pos 0 -#define reg_feq_fix_eh2_31_24_len 8 -#define reg_feq_fix_eh2_31_24_lsb 24 -#define xd_p_reg_ce_m2_central_7_0 0xABF4 -#define reg_ce_m2_central_7_0_pos 0 -#define reg_ce_m2_central_7_0_len 8 -#define reg_ce_m2_central_7_0_lsb 0 -#define xd_p_reg_ce_m2_central_15_8 0xABF5 -#define reg_ce_m2_central_15_8_pos 0 -#define reg_ce_m2_central_15_8_len 8 -#define reg_ce_m2_central_15_8_lsb 8 -#define xd_p_reg_ce_fftshift 0xABF6 -#define reg_ce_fftshift_pos 0 -#define reg_ce_fftshift_len 4 -#define reg_ce_fftshift_lsb 0 -#define xd_p_reg_ce_fftshift1 0xABF6 -#define reg_ce_fftshift1_pos 4 -#define reg_ce_fftshift1_len 4 -#define reg_ce_fftshift1_lsb 0 -#define xd_p_reg_ce_fftshift2 0xABF7 -#define reg_ce_fftshift2_pos 0 -#define reg_ce_fftshift2_len 4 -#define reg_ce_fftshift2_lsb 0 -#define xd_p_reg_ce_top_mobile 0xABF7 -#define reg_ce_top_mobile_pos 4 -#define reg_ce_top_mobile_len 1 -#define reg_ce_top_mobile_lsb 0 -#define xd_p_reg_strong_sginal_detected 0xA2BC -#define reg_strong_sginal_detected_pos 2 -#define reg_strong_sginal_detected_len 1 -#define reg_strong_sginal_detected_lsb 0 - -#define XD_MP2IF_BASE 0xB000 -#define XD_MP2IF_CSR (0x00 + XD_MP2IF_BASE) -#define XD_MP2IF_DMX_CTRL (0x03 + XD_MP2IF_BASE) -#define XD_MP2IF_PID_IDX (0x04 + XD_MP2IF_BASE) -#define XD_MP2IF_PID_DATA_L (0x05 + XD_MP2IF_BASE) -#define XD_MP2IF_PID_DATA_H (0x06 + XD_MP2IF_BASE) -#define XD_MP2IF_MISC (0x07 + XD_MP2IF_BASE) - -extern struct dvb_frontend *af9005_fe_attach(struct dvb_usb_device *d); -extern int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, - u8 * value); -extern int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, - u8 * values, int len); -extern int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, - u8 value); -extern int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, - u8 * values, int len); -extern int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, - u8 addr, u8 * values, int len); -extern int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, - u8 * values, int len); -extern int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, - u8 pos, u8 len, u8 * value); -extern int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, - u8 pos, u8 len, u8 value); -extern int af9005_send_command(struct dvb_usb_device *d, u8 command, - u8 * wbuf, int wlen, u8 * rbuf, int rlen); -extern int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, - u8 * values, int len); -extern int af9005_tuner_attach(struct dvb_usb_adapter *adap); -extern int af9005_led_control(struct dvb_usb_device *d, int onoff); - -extern u8 regmask[8]; - -/* remote control decoder */ -extern int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, - u32 * event, int *state); -extern struct rc_map_table rc_map_af9005_table[]; -extern int rc_map_af9005_table_size; - -#endif diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c deleted file mode 100644 index 5e45ae605427..000000000000 --- a/drivers/media/dvb/dvb-usb/az6027.c +++ /dev/null @@ -1,1182 +0,0 @@ -/* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027) - * receiver. - * - * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "az6027.h" - -#include "stb0899_drv.h" -#include "stb0899_reg.h" -#include "stb0899_cfg.h" - -#include "stb6100.h" -#include "stb6100_cfg.h" -#include "dvb_ca_en50221.h" - -int dvb_usb_az6027_debug; -module_param_named(debug, dvb_usb_az6027_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct az6027_device_state { - struct dvb_ca_en50221 ca; - struct mutex ca_mutex; - u8 power_state; -}; - -static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = { - - /* 0x0000000b, SYSREG */ - { STB0899_DEV_ID , 0x30 }, - { STB0899_DISCNTRL1 , 0x32 }, - { STB0899_DISCNTRL2 , 0x80 }, - { STB0899_DISRX_ST0 , 0x04 }, - { STB0899_DISRX_ST1 , 0x00 }, - { STB0899_DISPARITY , 0x00 }, - { STB0899_DISSTATUS , 0x20 }, - { STB0899_DISF22 , 0x99 }, - { STB0899_DISF22RX , 0xa8 }, - /* SYSREG ? */ - { STB0899_ACRPRESC , 0x11 }, - { STB0899_ACRDIV1 , 0x0a }, - { STB0899_ACRDIV2 , 0x05 }, - { STB0899_DACR1 , 0x00 }, - { STB0899_DACR2 , 0x00 }, - { STB0899_OUTCFG , 0x00 }, - { STB0899_MODECFG , 0x00 }, - { STB0899_IRQSTATUS_3 , 0xfe }, - { STB0899_IRQSTATUS_2 , 0x03 }, - { STB0899_IRQSTATUS_1 , 0x7c }, - { STB0899_IRQSTATUS_0 , 0xf4 }, - { STB0899_IRQMSK_3 , 0xf3 }, - { STB0899_IRQMSK_2 , 0xfc }, - { STB0899_IRQMSK_1 , 0xff }, - { STB0899_IRQMSK_0 , 0xff }, - { STB0899_IRQCFG , 0x00 }, - { STB0899_I2CCFG , 0x88 }, - { STB0899_I2CRPT , 0x58 }, - { STB0899_IOPVALUE5 , 0x00 }, - { STB0899_IOPVALUE4 , 0x33 }, - { STB0899_IOPVALUE3 , 0x6d }, - { STB0899_IOPVALUE2 , 0x90 }, - { STB0899_IOPVALUE1 , 0x60 }, - { STB0899_IOPVALUE0 , 0x00 }, - { STB0899_GPIO00CFG , 0x82 }, - { STB0899_GPIO01CFG , 0x82 }, - { STB0899_GPIO02CFG , 0x82 }, - { STB0899_GPIO03CFG , 0x82 }, - { STB0899_GPIO04CFG , 0x82 }, - { STB0899_GPIO05CFG , 0x82 }, - { STB0899_GPIO06CFG , 0x82 }, - { STB0899_GPIO07CFG , 0x82 }, - { STB0899_GPIO08CFG , 0x82 }, - { STB0899_GPIO09CFG , 0x82 }, - { STB0899_GPIO10CFG , 0x82 }, - { STB0899_GPIO11CFG , 0x82 }, - { STB0899_GPIO12CFG , 0x82 }, - { STB0899_GPIO13CFG , 0x82 }, - { STB0899_GPIO14CFG , 0x82 }, - { STB0899_GPIO15CFG , 0x82 }, - { STB0899_GPIO16CFG , 0x82 }, - { STB0899_GPIO17CFG , 0x82 }, - { STB0899_GPIO18CFG , 0x82 }, - { STB0899_GPIO19CFG , 0x82 }, - { STB0899_GPIO20CFG , 0x82 }, - { STB0899_SDATCFG , 0xb8 }, - { STB0899_SCLTCFG , 0xba }, - { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ - { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ - { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ - { STB0899_DIRCLKCFG , 0x82 }, - { STB0899_CLKOUT27CFG , 0x7e }, - { STB0899_STDBYCFG , 0x82 }, - { STB0899_CS0CFG , 0x82 }, - { STB0899_CS1CFG , 0x82 }, - { STB0899_DISEQCOCFG , 0x20 }, - { STB0899_GPIO32CFG , 0x82 }, - { STB0899_GPIO33CFG , 0x82 }, - { STB0899_GPIO34CFG , 0x82 }, - { STB0899_GPIO35CFG , 0x82 }, - { STB0899_GPIO36CFG , 0x82 }, - { STB0899_GPIO37CFG , 0x82 }, - { STB0899_GPIO38CFG , 0x82 }, - { STB0899_GPIO39CFG , 0x82 }, - { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ - { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ - { STB0899_FILTCTRL , 0x00 }, - { STB0899_SYSCTRL , 0x01 }, - { STB0899_STOPCLK1 , 0x20 }, - { STB0899_STOPCLK2 , 0x00 }, - { STB0899_INTBUFSTATUS , 0x00 }, - { STB0899_INTBUFCTRL , 0x0a }, - { 0xffff , 0xff }, -}; - -static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = { - { STB0899_DEMOD , 0x00 }, - { STB0899_RCOMPC , 0xc9 }, - { STB0899_AGC1CN , 0x01 }, - { STB0899_AGC1REF , 0x10 }, - { STB0899_RTC , 0x23 }, - { STB0899_TMGCFG , 0x4e }, - { STB0899_AGC2REF , 0x34 }, - { STB0899_TLSR , 0x84 }, - { STB0899_CFD , 0xf7 }, - { STB0899_ACLC , 0x87 }, - { STB0899_BCLC , 0x94 }, - { STB0899_EQON , 0x41 }, - { STB0899_LDT , 0xf1 }, - { STB0899_LDT2 , 0xe3 }, - { STB0899_EQUALREF , 0xb4 }, - { STB0899_TMGRAMP , 0x10 }, - { STB0899_TMGTHD , 0x30 }, - { STB0899_IDCCOMP , 0xfd }, - { STB0899_QDCCOMP , 0xff }, - { STB0899_POWERI , 0x0c }, - { STB0899_POWERQ , 0x0f }, - { STB0899_RCOMP , 0x6c }, - { STB0899_AGCIQIN , 0x80 }, - { STB0899_AGC2I1 , 0x06 }, - { STB0899_AGC2I2 , 0x00 }, - { STB0899_TLIR , 0x30 }, - { STB0899_RTF , 0x7f }, - { STB0899_DSTATUS , 0x00 }, - { STB0899_LDI , 0xbc }, - { STB0899_CFRM , 0xea }, - { STB0899_CFRL , 0x31 }, - { STB0899_NIRM , 0x2b }, - { STB0899_NIRL , 0x80 }, - { STB0899_ISYMB , 0x1d }, - { STB0899_QSYMB , 0xa6 }, - { STB0899_SFRH , 0x2f }, - { STB0899_SFRM , 0x68 }, - { STB0899_SFRL , 0x40 }, - { STB0899_SFRUPH , 0x2f }, - { STB0899_SFRUPM , 0x68 }, - { STB0899_SFRUPL , 0x40 }, - { STB0899_EQUAI1 , 0x02 }, - { STB0899_EQUAQ1 , 0xff }, - { STB0899_EQUAI2 , 0x04 }, - { STB0899_EQUAQ2 , 0x05 }, - { STB0899_EQUAI3 , 0x02 }, - { STB0899_EQUAQ3 , 0xfd }, - { STB0899_EQUAI4 , 0x03 }, - { STB0899_EQUAQ4 , 0x07 }, - { STB0899_EQUAI5 , 0x08 }, - { STB0899_EQUAQ5 , 0xf5 }, - { STB0899_DSTATUS2 , 0x00 }, - { STB0899_VSTATUS , 0x00 }, - { STB0899_VERROR , 0x86 }, - { STB0899_IQSWAP , 0x2a }, - { STB0899_ECNT1M , 0x00 }, - { STB0899_ECNT1L , 0x00 }, - { STB0899_ECNT2M , 0x00 }, - { STB0899_ECNT2L , 0x00 }, - { STB0899_ECNT3M , 0x0a }, - { STB0899_ECNT3L , 0xad }, - { STB0899_FECAUTO1 , 0x06 }, - { STB0899_FECM , 0x01 }, - { STB0899_VTH12 , 0xb0 }, - { STB0899_VTH23 , 0x7a }, - { STB0899_VTH34 , 0x58 }, - { STB0899_VTH56 , 0x38 }, - { STB0899_VTH67 , 0x34 }, - { STB0899_VTH78 , 0x24 }, - { STB0899_PRVIT , 0xff }, - { STB0899_VITSYNC , 0x19 }, - { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ - { STB0899_TSULC , 0x42 }, - { STB0899_RSLLC , 0x41 }, - { STB0899_TSLPL , 0x12 }, - { STB0899_TSCFGH , 0x0c }, - { STB0899_TSCFGM , 0x00 }, - { STB0899_TSCFGL , 0x00 }, - { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */ - { STB0899_RSSYNCDEL , 0x00 }, - { STB0899_TSINHDELH , 0x02 }, - { STB0899_TSINHDELM , 0x00 }, - { STB0899_TSINHDELL , 0x00 }, - { STB0899_TSLLSTKM , 0x1b }, - { STB0899_TSLLSTKL , 0xb3 }, - { STB0899_TSULSTKM , 0x00 }, - { STB0899_TSULSTKL , 0x00 }, - { STB0899_PCKLENUL , 0xbc }, - { STB0899_PCKLENLL , 0xcc }, - { STB0899_RSPCKLEN , 0xbd }, - { STB0899_TSSTATUS , 0x90 }, - { STB0899_ERRCTRL1 , 0xb6 }, - { STB0899_ERRCTRL2 , 0x95 }, - { STB0899_ERRCTRL3 , 0x8d }, - { STB0899_DMONMSK1 , 0x27 }, - { STB0899_DMONMSK0 , 0x03 }, - { STB0899_DEMAPVIT , 0x5c }, - { STB0899_PLPARM , 0x19 }, - { STB0899_PDELCTRL , 0x48 }, - { STB0899_PDELCTRL2 , 0x00 }, - { STB0899_BBHCTRL1 , 0x00 }, - { STB0899_BBHCTRL2 , 0x00 }, - { STB0899_HYSTTHRESH , 0x77 }, - { STB0899_MATCSTM , 0x00 }, - { STB0899_MATCSTL , 0x00 }, - { STB0899_UPLCSTM , 0x00 }, - { STB0899_UPLCSTL , 0x00 }, - { STB0899_DFLCSTM , 0x00 }, - { STB0899_DFLCSTL , 0x00 }, - { STB0899_SYNCCST , 0x00 }, - { STB0899_SYNCDCSTM , 0x00 }, - { STB0899_SYNCDCSTL , 0x00 }, - { STB0899_ISI_ENTRY , 0x00 }, - { STB0899_ISI_BIT_EN , 0x00 }, - { STB0899_MATSTRM , 0xf0 }, - { STB0899_MATSTRL , 0x02 }, - { STB0899_UPLSTRM , 0x45 }, - { STB0899_UPLSTRL , 0x60 }, - { STB0899_DFLSTRM , 0xe3 }, - { STB0899_DFLSTRL , 0x00 }, - { STB0899_SYNCSTR , 0x47 }, - { STB0899_SYNCDSTRM , 0x05 }, - { STB0899_SYNCDSTRL , 0x18 }, - { STB0899_CFGPDELSTATUS1 , 0x19 }, - { STB0899_CFGPDELSTATUS2 , 0x2b }, - { STB0899_BBFERRORM , 0x00 }, - { STB0899_BBFERRORL , 0x01 }, - { STB0899_UPKTERRORM , 0x00 }, - { STB0899_UPKTERRORL , 0x00 }, - { 0xffff , 0xff }, -}; - - - -struct stb0899_config az6027_stb0899_config = { - .init_dev = az6027_stb0899_s1_init_1, - .init_s2_demod = stb0899_s2_init_2, - .init_s1_demod = az6027_stb0899_s1_init_3, - .init_s2_fec = stb0899_s2_init_4, - .init_tst = stb0899_s1_init_5, - - .demod_address = 0xd0, /* 0x68, 0xd0 >> 1 */ - - .xtal_freq = 27000000, - .inversion = IQ_SWAP_ON, /* 1 */ - - .lo_clk = 76500000, - .hi_clk = 99000000, - - .esno_ave = STB0899_DVBS2_ESNO_AVE, - .esno_quant = STB0899_DVBS2_ESNO_QUANT, - .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, - .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, - .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, - .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, - .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, - .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, - .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, - - .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, - .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, - .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, - .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, - - .tuner_get_frequency = stb6100_get_frequency, - .tuner_set_frequency = stb6100_set_frequency, - .tuner_set_bandwidth = stb6100_set_bandwidth, - .tuner_get_bandwidth = stb6100_get_bandwidth, - .tuner_set_rfsiggain = NULL, -}; - -struct stb6100_config az6027_stb6100_config = { - .tuner_address = 0xc0, - .refclock = 27000000, -}; - - -/* check for mutex FIXME */ -int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) -{ - int ret = -1; - if (mutex_lock_interruptible(&d->usb_mutex)) - return -EAGAIN; - - ret = usb_control_msg(d->udev, - usb_rcvctrlpipe(d->udev, 0), - req, - USB_TYPE_VENDOR | USB_DIR_IN, - value, - index, - b, - blen, - 2000); - - if (ret < 0) { - warn("usb in operation failed. (%d)", ret); - ret = -EIO; - } else - ret = 0; - - deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); - debug_dump(b, blen, deb_xfer); - - mutex_unlock(&d->usb_mutex); - return ret; -} - -static int az6027_usb_out_op(struct dvb_usb_device *d, - u8 req, - u16 value, - u16 index, - u8 *b, - int blen) -{ - int ret; - - deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); - debug_dump(b, blen, deb_xfer); - - if (mutex_lock_interruptible(&d->usb_mutex)) - return -EAGAIN; - - ret = usb_control_msg(d->udev, - usb_sndctrlpipe(d->udev, 0), - req, - USB_TYPE_VENDOR | USB_DIR_OUT, - value, - index, - b, - blen, - 2000); - - if (ret != blen) { - warn("usb out operation failed. (%d)", ret); - mutex_unlock(&d->usb_mutex); - return -EIO; - } else{ - mutex_unlock(&d->usb_mutex); - return 0; - } -} - -static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - int ret; - u8 req; - u16 value; - u16 index; - int blen; - - deb_info("%s %d", __func__, onoff); - - req = 0xBC; - value = onoff; - index = 0; - blen = 0; - - ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); - if (ret != 0) - warn("usb out operation failed. (%d)", ret); - - return ret; -} - -/* keys for the enclosed remote control */ -static struct rc_map_table rc_map_az6027_table[] = { - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, -}; - -/* remote control stuff (does not work with my box) */ -static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - return 0; -} - -/* -int az6027_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 v = onoff; - return az6027_usb_out_op(d,0xBC,v,3,NULL,1); -} -*/ - -static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, - int slot, - int address) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - if (slot != 0) - return -EINVAL; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - - mutex_lock(&state->ca_mutex); - - req = 0xC1; - value = address; - index = 0; - blen = 1; - - ret = az6027_usb_in_op(d, req, value, index, b, blen); - if (ret < 0) { - warn("usb in operation failed. (%d)", ret); - ret = -EINVAL; - } else { - ret = b[0]; - } - - mutex_unlock(&state->ca_mutex); - kfree(b); - return ret; -} - -static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, - int slot, - int address, - u8 value) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - - int ret; - u8 req; - u16 value1; - u16 index; - int blen; - - deb_info("%s %d", __func__, slot); - if (slot != 0) - return -EINVAL; - - mutex_lock(&state->ca_mutex); - req = 0xC2; - value1 = address; - index = value; - blen = 0; - - ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); - if (ret != 0) - warn("usb out operation failed. (%d)", ret); - - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca, - int slot, - u8 address) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - if (slot != 0) - return -EINVAL; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - - mutex_lock(&state->ca_mutex); - - req = 0xC3; - value = address; - index = 0; - blen = 2; - - ret = az6027_usb_in_op(d, req, value, index, b, blen); - if (ret < 0) { - warn("usb in operation failed. (%d)", ret); - ret = -EINVAL; - } else { - if (b[0] == 0) - warn("Read CI IO error"); - - ret = b[1]; - deb_info("read cam data = %x from 0x%x", b[1], value); - } - - mutex_unlock(&state->ca_mutex); - kfree(b); - return ret; -} - -static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca, - int slot, - u8 address, - u8 value) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - - int ret; - u8 req; - u16 value1; - u16 index; - int blen; - - if (slot != 0) - return -EINVAL; - - mutex_lock(&state->ca_mutex); - req = 0xC4; - value1 = address; - index = value; - blen = 0; - - ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); - if (ret != 0) { - warn("usb out operation failed. (%d)", ret); - goto failed; - } - -failed: - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - - req = 0xC8; - value = 0; - index = 0; - blen = 1; - - ret = az6027_usb_in_op(d, req, value, index, b, blen); - if (ret < 0) { - warn("usb in operation failed. (%d)", ret); - ret = -EIO; - } else{ - ret = b[0]; - } - kfree(b); - return ret; -} - -static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - - int ret, i; - u8 req; - u16 value; - u16 index; - int blen; - - mutex_lock(&state->ca_mutex); - - req = 0xC6; - value = 1; - index = 0; - blen = 0; - - ret = az6027_usb_out_op(d, req, value, index, NULL, blen); - if (ret != 0) { - warn("usb out operation failed. (%d)", ret); - goto failed; - } - - msleep(500); - req = 0xC6; - value = 0; - index = 0; - blen = 0; - - ret = az6027_usb_out_op(d, req, value, index, NULL, blen); - if (ret != 0) { - warn("usb out operation failed. (%d)", ret); - goto failed; - } - - for (i = 0; i < 15; i++) { - msleep(100); - - if (CI_CamReady(ca, slot)) { - deb_info("CAM Ready"); - break; - } - } - msleep(5000); - -failed: - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) -{ - return 0; -} - -static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - - int ret; - u8 req; - u16 value; - u16 index; - int blen; - - deb_info("%s", __func__); - mutex_lock(&state->ca_mutex); - req = 0xC7; - value = 1; - index = 0; - blen = 0; - - ret = az6027_usb_out_op(d, req, value, index, NULL, blen); - if (ret != 0) { - warn("usb out operation failed. (%d)", ret); - goto failed; - } - -failed: - mutex_unlock(&state->ca_mutex); - return ret; -} - -static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - int ret; - u8 req; - u16 value; - u16 index; - int blen; - u8 *b; - - b = kmalloc(12, GFP_KERNEL); - if (!b) - return -ENOMEM; - mutex_lock(&state->ca_mutex); - - req = 0xC5; - value = 0; - index = 0; - blen = 1; - - ret = az6027_usb_in_op(d, req, value, index, b, blen); - if (ret < 0) { - warn("usb in operation failed. (%d)", ret); - ret = -EIO; - } else - ret = 0; - - if (!ret && b[0] == 1) { - ret = DVB_CA_EN50221_POLL_CAM_PRESENT | - DVB_CA_EN50221_POLL_CAM_READY; - } - - mutex_unlock(&state->ca_mutex); - kfree(b); - return ret; -} - - -static void az6027_ci_uninit(struct dvb_usb_device *d) -{ - struct az6027_device_state *state; - - deb_info("%s", __func__); - - if (NULL == d) - return; - - state = (struct az6027_device_state *)d->priv; - if (NULL == state) - return; - - if (NULL == state->ca.data) - return; - - dvb_ca_en50221_release(&state->ca); - - memset(&state->ca, 0, sizeof(state->ca)); -} - - -static int az6027_ci_init(struct dvb_usb_adapter *a) -{ - struct dvb_usb_device *d = a->dev; - struct az6027_device_state *state = (struct az6027_device_state *)d->priv; - int ret; - - deb_info("%s", __func__); - - mutex_init(&state->ca_mutex); - - state->ca.owner = THIS_MODULE; - state->ca.read_attribute_mem = az6027_ci_read_attribute_mem; - state->ca.write_attribute_mem = az6027_ci_write_attribute_mem; - state->ca.read_cam_control = az6027_ci_read_cam_control; - state->ca.write_cam_control = az6027_ci_write_cam_control; - state->ca.slot_reset = az6027_ci_slot_reset; - state->ca.slot_shutdown = az6027_ci_slot_shutdown; - state->ca.slot_ts_enable = az6027_ci_slot_ts_enable; - state->ca.poll_slot_status = az6027_ci_poll_slot_status; - state->ca.data = d; - - ret = dvb_ca_en50221_init(&a->dvb_adap, - &state->ca, - 0, /* flags */ - 1);/* n_slots */ - if (ret != 0) { - err("Cannot initialize CI: Error %d.", ret); - memset(&state->ca, 0, sizeof(state->ca)); - return ret; - } - - deb_info("CI initialized."); - - return 0; -} - -/* -static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6]) -{ - az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6); - return 0; -} -*/ - -static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) -{ - - u8 buf; - struct dvb_usb_adapter *adap = fe->dvb->priv; - - struct i2c_msg i2c_msg = { - .addr = 0x99, - .flags = 0, - .buf = &buf, - .len = 1 - }; - - /* - * 2 --18v - * 1 --13v - * 0 --off - */ - switch (voltage) { - case SEC_VOLTAGE_13: - buf = 1; - i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); - break; - - case SEC_VOLTAGE_18: - buf = 2; - i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); - break; - - case SEC_VOLTAGE_OFF: - buf = 0; - i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); - break; - - default: - return -EINVAL; - } - return 0; -} - - -static int az6027_frontend_poweron(struct dvb_usb_adapter *adap) -{ - int ret; - u8 req; - u16 value; - u16 index; - int blen; - - req = 0xBC; - value = 1; /* power on */ - index = 3; - blen = 0; - - ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); - if (ret != 0) - return -EIO; - - return 0; -} -static int az6027_frontend_reset(struct dvb_usb_adapter *adap) -{ - int ret; - u8 req; - u16 value; - u16 index; - int blen; - - /* reset demodulator */ - req = 0xC0; - value = 1; /* high */ - index = 3; - blen = 0; - - ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); - if (ret != 0) - return -EIO; - - req = 0xC0; - value = 0; /* low */ - index = 3; - blen = 0; - msleep_interruptible(200); - - ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); - if (ret != 0) - return -EIO; - - msleep_interruptible(200); - - req = 0xC0; - value = 1; /*high */ - index = 3; - blen = 0; - - ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); - if (ret != 0) - return -EIO; - - msleep_interruptible(200); - return 0; -} - -static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff) -{ - int ret; - u8 req; - u16 value; - u16 index; - int blen; - - /* TS passthrough */ - req = 0xC7; - value = onoff; - index = 0; - blen = 0; - - ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); - if (ret != 0) - return -EIO; - - return 0; -} - -static int az6027_frontend_attach(struct dvb_usb_adapter *adap) -{ - - az6027_frontend_poweron(adap); - az6027_frontend_reset(adap); - - deb_info("adap = %p, dev = %p\n", adap, adap->dev); - adap->fe_adap[0].fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap); - - if (adap->fe_adap[0].fe) { - deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address); - if (stb6100_attach(adap->fe_adap[0].fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) { - deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address); - adap->fe_adap[0].fe->ops.set_voltage = az6027_set_voltage; - az6027_ci_init(adap); - } else { - adap->fe_adap[0].fe = NULL; - } - } else - warn("no front-end attached\n"); - - az6027_frontend_tsbypass(adap, 0); - - return 0; -} - -static struct dvb_usb_device_properties az6027_properties; - -static void az6027_usb_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - az6027_ci_uninit(d); - dvb_usb_device_exit(intf); -} - - -static int az6027_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - return dvb_usb_device_init(intf, - &az6027_properties, - THIS_MODULE, - NULL, - adapter_nr); -} - -/* I2C */ -static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i = 0, j = 0, len = 0; - u16 index; - u16 value; - int length; - u8 req; - u8 *data; - - data = kmalloc(256, GFP_KERNEL); - if (!data) - return -ENOMEM; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) { - kfree(data); - return -EAGAIN; - } - - if (num > 2) - warn("more than 2 i2c messages at a time is not handled yet. TODO."); - - for (i = 0; i < num; i++) { - - if (msg[i].addr == 0x99) { - req = 0xBE; - index = 0; - value = msg[i].buf[0] & 0x00ff; - length = 1; - az6027_usb_out_op(d, req, value, index, data, length); - } - - if (msg[i].addr == 0xd0) { - /* write/read request */ - if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { - req = 0xB9; - index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); - value = msg[i].addr + (msg[i].len << 8); - length = msg[i + 1].len + 6; - az6027_usb_in_op(d, req, value, index, data, length); - len = msg[i + 1].len; - for (j = 0; j < len; j++) - msg[i + 1].buf[j] = data[j + 5]; - - i++; - } else { - - /* demod 16bit addr */ - req = 0xBD; - index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); - value = msg[i].addr + (2 << 8); - length = msg[i].len - 2; - len = msg[i].len - 2; - for (j = 0; j < len; j++) - data[j] = msg[i].buf[j + 2]; - az6027_usb_out_op(d, req, value, index, data, length); - } - } - - if (msg[i].addr == 0xc0) { - if (msg[i].flags & I2C_M_RD) { - - req = 0xB9; - index = 0x0; - value = msg[i].addr; - length = msg[i].len + 6; - az6027_usb_in_op(d, req, value, index, data, length); - len = msg[i].len; - for (j = 0; j < len; j++) - msg[i].buf[j] = data[j + 5]; - - } else { - - req = 0xBD; - index = msg[i].buf[0] & 0x00FF; - value = msg[i].addr + (1 << 8); - length = msg[i].len - 1; - len = msg[i].len - 1; - - for (j = 0; j < len; j++) - data[j] = msg[i].buf[j + 1]; - - az6027_usb_out_op(d, req, value, index, data, length); - } - } - } - mutex_unlock(&d->i2c_mutex); - kfree(data); - - return i; -} - - -static u32 az6027_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm az6027_i2c_algo = { - .master_xfer = az6027_i2c_xfer, - .functionality = az6027_i2c_func, -}; - -int az6027_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - u8 *b; - s16 ret; - - b = kmalloc(16, GFP_KERNEL); - if (!b) - return -ENOMEM; - - ret = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - 0xb7, - USB_TYPE_VENDOR | USB_DIR_IN, - 6, - 0, - b, - 6, - USB_CTRL_GET_TIMEOUT); - - *cold = ret <= 0; - kfree(b); - deb_info("cold: %d\n", *cold); - return 0; -} - - -static struct usb_device_id az6027_usb_table[] = { - { USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI_V1) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI_V2) }, - { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V1) }, - { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V2) }, - { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_SAT) }, - { }, -}; - -MODULE_DEVICE_TABLE(usb, az6027_usb_table); - -static struct dvb_usb_device_properties az6027_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-az6027-03.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct az6027_device_state), - .identify_state = az6027_identify_state, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = az6027_streaming_ctrl, - .frontend_attach = az6027_frontend_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, -/* - .power_ctrl = az6027_power_ctrl, - .read_mac_address = az6027_read_mac_addr, - */ - .rc.legacy = { - .rc_map_table = rc_map_az6027_table, - .rc_map_size = ARRAY_SIZE(rc_map_az6027_table), - .rc_interval = 400, - .rc_query = az6027_rc_query, - }, - - .i2c_algo = &az6027_i2c_algo, - - .num_device_descs = 6, - .devices = { - { - .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)", - .cold_ids = { &az6027_usb_table[0], NULL }, - .warm_ids = { NULL }, - }, { - .name = "TERRATEC S7", - .cold_ids = { &az6027_usb_table[1], NULL }, - .warm_ids = { NULL }, - }, { - .name = "TERRATEC S7 MKII", - .cold_ids = { &az6027_usb_table[2], NULL }, - .warm_ids = { NULL }, - }, { - .name = "Technisat SkyStar USB 2 HD CI", - .cold_ids = { &az6027_usb_table[3], NULL }, - .warm_ids = { NULL }, - }, { - .name = "Technisat SkyStar USB 2 HD CI", - .cold_ids = { &az6027_usb_table[4], NULL }, - .warm_ids = { NULL }, - }, { - .name = "Elgato EyeTV Sat", - .cold_ids = { &az6027_usb_table[5], NULL }, - .warm_ids = { NULL }, - }, - { NULL }, - } -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver az6027_usb_driver = { - .name = "dvb_usb_az6027", - .probe = az6027_usb_probe, - .disconnect = az6027_usb_disconnect, - .id_table = az6027_usb_table, -}; - -module_usb_driver(az6027_usb_driver); - -MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>"); -MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/az6027.h b/drivers/media/dvb/dvb-usb/az6027.h deleted file mode 100644 index f3afe17f3f3d..000000000000 --- a/drivers/media/dvb/dvb-usb/az6027.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _DVB_USB_VP6027_H_ -#define _DVB_USB_VP6027_H_ - -#define DVB_USB_LOG_PREFIX "az6027" -#include "dvb-usb.h" - - -extern int dvb_usb_az6027_debug; -#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args) -#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args) -#define deb_rc(args...) dprintk(dvb_usb_az6027_debug, 0x04, args) -#define deb_fe(args...) dprintk(dvb_usb_az6027_debug, 0x08, args) - -#endif diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c deleted file mode 100644 index 0a98548ecd17..000000000000 --- a/drivers/media/dvb/dvb-usb/cinergyT2-core.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. - * - * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) - * - * Based on the dvb-usb-framework code and the - * original Terratec Cinergy T2 driver by: - * - * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and - * Holger Waechtler <holger@qanu.de> - * - * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include "cinergyT2.h" - - -/* debug */ -int dvb_usb_cinergyt2_debug; - -module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " - "(or-able))."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct cinergyt2_state { - u8 rc_counter; -}; - -/* We are missing a release hook with usb_device data */ -static struct dvb_usb_device *cinergyt2_usb_device; - -static struct dvb_usb_device_properties cinergyt2_properties; - -static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) -{ - char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; - char result[64]; - return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result, - sizeof(result), 0); -} - -static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) -{ - char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 }; - char state[3]; - return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0); -} - -static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) -{ - char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION }; - char state[3]; - int ret; - - adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); - - ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state, - sizeof(state), 0); - if (ret < 0) { - deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " - "state info\n"); - } - - /* Copy this pointer as we are gonna need it in the release phase */ - cinergyt2_usb_device = adap->dev; - - return 0; -} - -static struct rc_map_table rc_map_cinergyt2_table[] = { - { 0x0401, KEY_POWER }, - { 0x0402, KEY_1 }, - { 0x0403, KEY_2 }, - { 0x0404, KEY_3 }, - { 0x0405, KEY_4 }, - { 0x0406, KEY_5 }, - { 0x0407, KEY_6 }, - { 0x0408, KEY_7 }, - { 0x0409, KEY_8 }, - { 0x040a, KEY_9 }, - { 0x040c, KEY_0 }, - { 0x040b, KEY_VIDEO }, - { 0x040d, KEY_REFRESH }, - { 0x040e, KEY_SELECT }, - { 0x040f, KEY_EPG }, - { 0x0410, KEY_UP }, - { 0x0414, KEY_DOWN }, - { 0x0411, KEY_LEFT }, - { 0x0413, KEY_RIGHT }, - { 0x0412, KEY_OK }, - { 0x0415, KEY_TEXT }, - { 0x0416, KEY_INFO }, - { 0x0417, KEY_RED }, - { 0x0418, KEY_GREEN }, - { 0x0419, KEY_YELLOW }, - { 0x041a, KEY_BLUE }, - { 0x041c, KEY_VOLUMEUP }, - { 0x041e, KEY_VOLUMEDOWN }, - { 0x041d, KEY_MUTE }, - { 0x041b, KEY_CHANNELUP }, - { 0x041f, KEY_CHANNELDOWN }, - { 0x0440, KEY_PAUSE }, - { 0x044c, KEY_PLAY }, - { 0x0458, KEY_RECORD }, - { 0x0454, KEY_PREVIOUS }, - { 0x0448, KEY_STOP }, - { 0x045c, KEY_NEXT } -}; - -/* Number of keypresses to ignore before detect repeating */ -#define RC_REPEAT_DELAY 3 - -static int repeatable_keys[] = { - KEY_UP, - KEY_DOWN, - KEY_LEFT, - KEY_RIGHT, - KEY_VOLUMEUP, - KEY_VOLUMEDOWN, - KEY_CHANNELUP, - KEY_CHANNELDOWN -}; - -static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - struct cinergyt2_state *st = d->priv; - u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; - int i; - - *state = REMOTE_NO_KEY_PRESSED; - - dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); - if (key[4] == 0xff) { - /* key repeat */ - st->rc_counter++; - if (st->rc_counter > RC_REPEAT_DELAY) { - for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { - if (d->last_event == repeatable_keys[i]) { - *state = REMOTE_KEY_REPEAT; - *event = d->last_event; - deb_rc("repeat key, event %x\n", - *event); - return 0; - } - } - deb_rc("repeated key (non repeatable)\n"); - } - return 0; - } - - /* hack to pass checksum on the custom field */ - key[2] = ~key[1]; - dvb_usb_nec_rc_key_to_event(d, key, event, state); - if (key[0] != 0) { - if (*event != d->last_event) - st->rc_counter = 0; - - deb_rc("key: %x %x %x %x %x\n", - key[0], key[1], key[2], key[3], key[4]); - } - return 0; -} - -static int cinergyt2_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - return dvb_usb_device_init(intf, &cinergyt2_properties, - THIS_MODULE, NULL, adapter_nr); -} - - -static struct usb_device_id cinergyt2_usb_table[] = { - { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table); - -static struct dvb_usb_device_properties cinergyt2_properties = { - .size_of_priv = sizeof(struct cinergyt2_state), - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cinergyt2_streaming_ctrl, - .frontend_attach = cinergyt2_frontend_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 512, - } - } - }, - }}, - } - }, - - .power_ctrl = cinergyt2_power_ctrl, - - .rc.legacy = { - .rc_interval = 50, - .rc_map_table = rc_map_cinergyt2_table, - .rc_map_size = ARRAY_SIZE(rc_map_cinergyt2_table), - .rc_query = cinergyt2_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 1, - - .num_device_descs = 1, - .devices = { - { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver", - .cold_ids = {NULL}, - .warm_ids = { &cinergyt2_usb_table[0], NULL }, - }, - { NULL }, - } -}; - - -static struct usb_driver cinergyt2_driver = { - .name = "cinergyT2", - .probe = cinergyt2_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = cinergyt2_usb_table -}; - -module_usb_driver(cinergyt2_driver); - -MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Tomi Orava"); diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c deleted file mode 100644 index 1efc028a76c9..000000000000 --- a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c +++ /dev/null @@ -1,356 +0,0 @@ -/* - * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. - * - * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) - * - * Based on the dvb-usb-framework code and the - * original Terratec Cinergy T2 driver by: - * - * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and - * Holger Waechtler <holger@qanu.de> - * - * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include "cinergyT2.h" - - -/** - * convert linux-dvb frontend parameter set into TPS. - * See ETSI ETS-300744, section 4.6.2, table 9 for details. - * - * This function is probably reusable and may better get placed in a support - * library. - * - * We replace errornous fields by default TPS fields (the ones with value 0). - */ - -static uint16_t compute_tps(struct dtv_frontend_properties *op) -{ - uint16_t tps = 0; - - switch (op->code_rate_HP) { - case FEC_2_3: - tps |= (1 << 7); - break; - case FEC_3_4: - tps |= (2 << 7); - break; - case FEC_5_6: - tps |= (3 << 7); - break; - case FEC_7_8: - tps |= (4 << 7); - break; - case FEC_1_2: - case FEC_AUTO: - default: - /* tps |= (0 << 7) */; - } - - switch (op->code_rate_LP) { - case FEC_2_3: - tps |= (1 << 4); - break; - case FEC_3_4: - tps |= (2 << 4); - break; - case FEC_5_6: - tps |= (3 << 4); - break; - case FEC_7_8: - tps |= (4 << 4); - break; - case FEC_1_2: - case FEC_AUTO: - default: - /* tps |= (0 << 4) */; - } - - switch (op->modulation) { - case QAM_16: - tps |= (1 << 13); - break; - case QAM_64: - tps |= (2 << 13); - break; - case QPSK: - default: - /* tps |= (0 << 13) */; - } - - switch (op->transmission_mode) { - case TRANSMISSION_MODE_8K: - tps |= (1 << 0); - break; - case TRANSMISSION_MODE_2K: - default: - /* tps |= (0 << 0) */; - } - - switch (op->guard_interval) { - case GUARD_INTERVAL_1_16: - tps |= (1 << 2); - break; - case GUARD_INTERVAL_1_8: - tps |= (2 << 2); - break; - case GUARD_INTERVAL_1_4: - tps |= (3 << 2); - break; - case GUARD_INTERVAL_1_32: - default: - /* tps |= (0 << 2) */; - } - - switch (op->hierarchy) { - case HIERARCHY_1: - tps |= (1 << 10); - break; - case HIERARCHY_2: - tps |= (2 << 10); - break; - case HIERARCHY_4: - tps |= (3 << 10); - break; - case HIERARCHY_NONE: - default: - /* tps |= (0 << 10) */; - } - - return tps; -} - -struct cinergyt2_fe_state { - struct dvb_frontend fe; - struct dvb_usb_device *d; -}; - -static int cinergyt2_fe_read_status(struct dvb_frontend *fe, - fe_status_t *status) -{ - struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg result; - u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result, - sizeof(result), 0); - if (ret < 0) - return ret; - - *status = 0; - - if (0xffff - le16_to_cpu(result.gain) > 30) - *status |= FE_HAS_SIGNAL; - if (result.lock_bits & (1 << 6)) - *status |= FE_HAS_LOCK; - if (result.lock_bits & (1 << 5)) - *status |= FE_HAS_SYNC; - if (result.lock_bits & (1 << 4)) - *status |= FE_HAS_CARRIER; - if (result.lock_bits & (1 << 1)) - *status |= FE_HAS_VITERBI; - - if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != - (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) - *status &= ~FE_HAS_LOCK; - - return 0; -} - -static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) -{ - struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) - return ret; - - *ber = le32_to_cpu(status.viterbi_error_rate); - return 0; -} - -static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) -{ - struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n", - ret); - return ret; - } - *unc = le32_to_cpu(status.uncorrected_block_count); - return 0; -} - -static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, - u16 *strength) -{ - struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_signal_strength() Failed!" - " (Error=%d)\n", ret); - return ret; - } - *strength = (0xffff - le16_to_cpu(status.gain)); - return 0; -} - -static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) -{ - struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret); - return ret; - } - *snr = (status.snr << 8) | status.snr; - return 0; -} - -static int cinergyt2_fe_init(struct dvb_frontend *fe) -{ - return 0; -} - -static int cinergyt2_fe_sleep(struct dvb_frontend *fe) -{ - deb_info("cinergyt2_fe_sleep() Called\n"); - return 0; -} - -static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe, - struct dvb_frontend_tune_settings *tune) -{ - tune->min_delay_ms = 800; - return 0; -} - -static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_set_parameters_msg param; - char result[2]; - int err; - - param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; - param.tps = cpu_to_le16(compute_tps(fep)); - param.freq = cpu_to_le32(fep->frequency / 1000); - param.flags = 0; - - switch (fep->bandwidth_hz) { - default: - case 8000000: - param.bandwidth = 8; - break; - case 7000000: - param.bandwidth = 7; - break; - case 6000000: - param.bandwidth = 6; - break; - } - - err = dvb_usb_generic_rw(state->d, - (char *)¶m, sizeof(param), - result, sizeof(result), 0); - if (err < 0) - err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); - - return (err < 0) ? err : 0; -} - -static void cinergyt2_fe_release(struct dvb_frontend *fe) -{ - struct cinergyt2_fe_state *state = fe->demodulator_priv; - if (state != NULL) - kfree(state); -} - -static struct dvb_frontend_ops cinergyt2_fe_ops; - -struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) -{ - struct cinergyt2_fe_state *s = kzalloc(sizeof( - struct cinergyt2_fe_state), GFP_KERNEL); - if (s == NULL) - return NULL; - - s->d = d; - memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); - s->fe.demodulator_priv = s; - return &s->fe; -} - - -static struct dvb_frontend_ops cinergyt2_fe_ops = { - .delsys = { SYS_DVBT }, - .info = { - .name = DRIVER_NAME, - .frequency_min = 174000000, - .frequency_max = 862000000, - .frequency_stepsize = 166667, - .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 - | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 - | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 - | FE_CAN_FEC_AUTO | FE_CAN_QPSK - | FE_CAN_QAM_16 | FE_CAN_QAM_64 - | FE_CAN_QAM_AUTO - | FE_CAN_TRANSMISSION_MODE_AUTO - | FE_CAN_GUARD_INTERVAL_AUTO - | FE_CAN_HIERARCHY_AUTO - | FE_CAN_RECOVER - | FE_CAN_MUTE_TS - }, - - .release = cinergyt2_fe_release, - - .init = cinergyt2_fe_init, - .sleep = cinergyt2_fe_sleep, - - .set_frontend = cinergyt2_fe_set_frontend, - .get_tune_settings = cinergyt2_fe_get_tune_settings, - - .read_status = cinergyt2_fe_read_status, - .read_ber = cinergyt2_fe_read_ber, - .read_signal_strength = cinergyt2_fe_read_signal_strength, - .read_snr = cinergyt2_fe_read_snr, - .read_ucblocks = cinergyt2_fe_read_unc_blocks, -}; diff --git a/drivers/media/dvb/dvb-usb/cinergyT2.h b/drivers/media/dvb/dvb-usb/cinergyT2.h deleted file mode 100644 index 84efe03771eb..000000000000 --- a/drivers/media/dvb/dvb-usb/cinergyT2.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. - * - * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) - * - * Based on the dvb-usb-framework code and the - * original Terratec Cinergy T2 driver by: - * - * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and - * Holger Waechtler <holger@qanu.de> - * - * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef _DVB_USB_CINERGYT2_H_ -#define _DVB_USB_CINERGYT2_H_ - -#include <linux/usb/input.h> - -#define DVB_USB_LOG_PREFIX "cinergyT2" -#include "dvb-usb.h" - -#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" - -extern int dvb_usb_cinergyt2_debug; - -#define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args) -#define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args) -#define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args) -#define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args) -#define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args) -#define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args) -#define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args) -#define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args) -#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args) - - - -enum cinergyt2_ep1_cmd { - CINERGYT2_EP1_PID_TABLE_RESET = 0x01, - CINERGYT2_EP1_PID_SETUP = 0x02, - CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, - CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, - CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, - CINERGYT2_EP1_START_SCAN = 0x06, - CINERGYT2_EP1_CONTINUE_SCAN = 0x07, - CINERGYT2_EP1_GET_RC_EVENTS = 0x08, - CINERGYT2_EP1_SLEEP_MODE = 0x09, - CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A -}; - - -struct dvbt_get_status_msg { - uint32_t freq; - uint8_t bandwidth; - uint16_t tps; - uint8_t flags; - __le16 gain; - uint8_t snr; - __le32 viterbi_error_rate; - uint32_t rs_error_rate; - __le32 uncorrected_block_count; - uint8_t lock_bits; - uint8_t prev_lock_bits; -} __attribute__((packed)); - - -struct dvbt_set_parameters_msg { - uint8_t cmd; - __le32 freq; - uint8_t bandwidth; - __le16 tps; - uint8_t flags; -} __attribute__((packed)); - - -extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d); - -#endif /* _DVB_USB_CINERGYT2_H_ */ - diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c deleted file mode 100644 index 3940bb0f9ef6..000000000000 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ /dev/null @@ -1,2043 +0,0 @@ -/* DVB USB compliant linux driver for Conexant USB reference design. - * - * The Conexant reference design I saw on their website was only for analogue - * capturing (using the cx25842). The box I took to write this driver (reverse - * engineered) is the one labeled Medion MD95700. In addition to the cx25842 - * for analogue capturing it also has a cx22702 DVB-T demodulator on the main - * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. - * - * Maybe it is a little bit premature to call this driver cxusb, but I assume - * the USB protocol is identical or at least inherited from the reference - * design, so it can be reused for the "analogue-only" device (if it will - * appear at all). - * - * TODO: Use the cx25840-driver for the analogue part - * - * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) - * Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org) - * Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include <media/tuner.h> -#include <linux/vmalloc.h> -#include <linux/slab.h> - -#include "cxusb.h" - -#include "cx22702.h" -#include "lgdt330x.h" -#include "mt352.h" -#include "mt352_priv.h" -#include "zl10353.h" -#include "tuner-xc2028.h" -#include "tuner-simple.h" -#include "mxl5005s.h" -#include "max2165.h" -#include "dib7000p.h" -#include "dib0070.h" -#include "lgs8gxx.h" -#include "atbm8830.h" - -/* debug */ -static int dvb_usb_cxusb_debug; -module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define deb_info(args...) dprintk(dvb_usb_cxusb_debug, 0x03, args) -#define deb_i2c(args...) dprintk(dvb_usb_cxusb_debug, 0x02, args) - -static int cxusb_ctrl_msg(struct dvb_usb_device *d, - u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 sndbuf[1+wlen]; - memset(sndbuf, 0, 1+wlen); - - sndbuf[0] = cmd; - memcpy(&sndbuf[1], wbuf, wlen); - if (wo) - return dvb_usb_generic_write(d, sndbuf, 1+wlen); - else - return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0); -} - -/* GPIO */ -static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) -{ - struct cxusb_state *st = d->priv; - u8 o[2], i; - - if (st->gpio_write_state[GPIO_TUNER] == onoff) - return; - - o[0] = GPIO_TUNER; - o[1] = onoff; - cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - - if (i != 0x01) - deb_info("gpio_write failed.\n"); - - st->gpio_write_state[GPIO_TUNER] = onoff; -} - -static int cxusb_bluebird_gpio_rw(struct dvb_usb_device *d, u8 changemask, - u8 newval) -{ - u8 o[2], gpio_state; - int rc; - - o[0] = 0xff & ~changemask; /* mask of bits to keep */ - o[1] = newval & changemask; /* new values for bits */ - - rc = cxusb_ctrl_msg(d, CMD_BLUEBIRD_GPIO_RW, o, 2, &gpio_state, 1); - if (rc < 0 || (gpio_state & changemask) != (newval & changemask)) - deb_info("bluebird_gpio_write failed.\n"); - - return rc < 0 ? rc : gpio_state; -} - -static void cxusb_bluebird_gpio_pulse(struct dvb_usb_device *d, u8 pin, int low) -{ - cxusb_bluebird_gpio_rw(d, pin, low ? 0 : pin); - msleep(5); - cxusb_bluebird_gpio_rw(d, pin, low ? pin : 0); -} - -static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff) -{ - cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40); -} - -static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, - u8 addr, int onoff) -{ - u8 o[2] = {addr, onoff}; - u8 i; - int rc; - - rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - - if (rc < 0) - return rc; - if (i == 0x01) - return 0; - else { - deb_info("gpio_write failed.\n"); - return -EIO; - } -} - -/* I2C */ -static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - - if (d->udev->descriptor.idVendor == USB_VID_MEDION) - switch (msg[i].addr) { - case 0x63: - cxusb_gpio_tuner(d, 0); - break; - default: - cxusb_gpio_tuner(d, 1); - break; - } - - if (msg[i].flags & I2C_M_RD) { - /* read only */ - u8 obuf[3], ibuf[1+msg[i].len]; - obuf[0] = 0; - obuf[1] = msg[i].len; - obuf[2] = msg[i].addr; - if (cxusb_ctrl_msg(d, CMD_I2C_READ, - obuf, 3, - ibuf, 1+msg[i].len) < 0) { - warn("i2c read failed"); - break; - } - memcpy(msg[i].buf, &ibuf[1], msg[i].len); - } else if (i+1 < num && (msg[i+1].flags & I2C_M_RD) && - msg[i].addr == msg[i+1].addr) { - /* write to then read from same address */ - u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len]; - obuf[0] = msg[i].len; - obuf[1] = msg[i+1].len; - obuf[2] = msg[i].addr; - memcpy(&obuf[3], msg[i].buf, msg[i].len); - - if (cxusb_ctrl_msg(d, CMD_I2C_READ, - obuf, 3+msg[i].len, - ibuf, 1+msg[i+1].len) < 0) - break; - - if (ibuf[0] != 0x08) - deb_i2c("i2c read may have failed\n"); - - memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len); - - i++; - } else { - /* write only */ - u8 obuf[2+msg[i].len], ibuf; - obuf[0] = msg[i].addr; - obuf[1] = msg[i].len; - memcpy(&obuf[2], msg[i].buf, msg[i].len); - - if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf, - 2+msg[i].len, &ibuf,1) < 0) - break; - if (ibuf != 0x08) - deb_i2c("i2c write may have failed\n"); - } - } - - mutex_unlock(&d->i2c_mutex); - return i == num ? num : -EREMOTEIO; -} - -static u32 cxusb_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm cxusb_i2c_algo = { - .master_xfer = cxusb_i2c_xfer, - .functionality = cxusb_i2c_func, -}; - -static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 b = 0; - if (onoff) - return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); - else - return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0); -} - -static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - int ret; - if (!onoff) - return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0); - if (d->state == DVB_USB_STATE_INIT && - usb_set_interface(d->udev, 0, 0) < 0) - err("set interface failed"); - do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) && - !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) && - !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0); - if (!ret) { - /* FIXME: We don't know why, but we need to configure the - * lgdt3303 with the register settings below on resume */ - int i; - u8 buf, bufs[] = { - 0x0e, 0x2, 0x00, 0x7f, - 0x0e, 0x2, 0x02, 0xfe, - 0x0e, 0x2, 0x02, 0x01, - 0x0e, 0x2, 0x00, 0x03, - 0x0e, 0x2, 0x0d, 0x40, - 0x0e, 0x2, 0x0e, 0x87, - 0x0e, 0x2, 0x0f, 0x8e, - 0x0e, 0x2, 0x10, 0x01, - 0x0e, 0x2, 0x14, 0xd7, - 0x0e, 0x2, 0x47, 0x88, - }; - msleep(20); - for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) { - ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE, - bufs+i, 4, &buf, 1); - if (ret) - break; - if (buf != 0x8) - return -EREMOTEIO; - } - } - return ret; -} - -static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 b = 0; - if (onoff) - return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); - else - return 0; -} - -static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - int rc = 0; - - rc = cxusb_power_ctrl(d, onoff); - if (!onoff) - cxusb_nano2_led(d, 0); - - return rc; -} - -static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - int ret; - u8 b; - ret = cxusb_power_ctrl(d, onoff); - if (!onoff) - return ret; - - msleep(128); - cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1); - msleep(100); - return ret; -} - -static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - u8 buf[2] = { 0x03, 0x00 }; - if (onoff) - cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, buf, 2, NULL, 0); - else - cxusb_ctrl_msg(adap->dev, CMD_STREAMING_OFF, NULL, 0, NULL, 0); - - return 0; -} - -static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - if (onoff) - cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0); - else - cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF, - NULL, 0, NULL, 0); - return 0; -} - -static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) -{ - int ep = d->props.generic_bulk_ctrl_endpoint; - const int timeout = 100; - const int junk_len = 32; - u8 *junk; - int rd_count; - - /* Discard remaining data in video pipe */ - junk = kmalloc(junk_len, GFP_KERNEL); - if (!junk) - return; - while (1) { - if (usb_bulk_msg(d->udev, - usb_rcvbulkpipe(d->udev, ep), - junk, junk_len, &rd_count, timeout) < 0) - break; - if (!rd_count) - break; - } - kfree(junk); -} - -static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d) -{ - struct usb_data_stream_properties *p = &d->props.adapter[0].fe[0].stream; - const int timeout = 100; - const int junk_len = p->u.bulk.buffersize; - u8 *junk; - int rd_count; - - /* Discard remaining data in video pipe */ - junk = kmalloc(junk_len, GFP_KERNEL); - if (!junk) - return; - while (1) { - if (usb_bulk_msg(d->udev, - usb_rcvbulkpipe(d->udev, p->endpoint), - junk, junk_len, &rd_count, timeout) < 0) - break; - if (!rd_count) - break; - } - kfree(junk); -} - -static int cxusb_d680_dmb_streaming_ctrl( - struct dvb_usb_adapter *adap, int onoff) -{ - if (onoff) { - u8 buf[2] = { 0x03, 0x00 }; - cxusb_d680_dmb_drain_video(adap->dev); - return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, - buf, sizeof(buf), NULL, 0); - } else { - int ret = cxusb_ctrl_msg(adap->dev, - CMD_STREAMING_OFF, NULL, 0, NULL, 0); - return ret; - } -} - -static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; - u8 ircode[4]; - int i; - - cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4); - - *event = 0; - *state = REMOTE_NO_KEY_PRESSED; - - for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { - if (rc5_custom(&keymap[i]) == ircode[2] && - rc5_data(&keymap[i]) == ircode[3]) { - *event = keymap[i].keycode; - *state = REMOTE_KEY_PRESSED; - - return 0; - } - } - - return 0; -} - -static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event, - int *state) -{ - struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; - u8 ircode[4]; - int i; - struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD, - .buf = ircode, .len = 4 }; - - *event = 0; - *state = REMOTE_NO_KEY_PRESSED; - - if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1) - return 0; - - for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { - if (rc5_custom(&keymap[i]) == ircode[1] && - rc5_data(&keymap[i]) == ircode[2]) { - *event = keymap[i].keycode; - *state = REMOTE_KEY_PRESSED; - - return 0; - } - } - - return 0; -} - -static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event, - int *state) -{ - struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; - u8 ircode[2]; - int i; - - *event = 0; - *state = REMOTE_NO_KEY_PRESSED; - - if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0) - return 0; - - for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { - if (rc5_custom(&keymap[i]) == ircode[0] && - rc5_data(&keymap[i]) == ircode[1]) { - *event = keymap[i].keycode; - *state = REMOTE_KEY_PRESSED; - - return 0; - } - } - - return 0; -} - -static struct rc_map_table rc_map_dvico_mce_table[] = { - { 0xfe02, KEY_TV }, - { 0xfe0e, KEY_MP3 }, - { 0xfe1a, KEY_DVD }, - { 0xfe1e, KEY_FAVORITES }, - { 0xfe16, KEY_SETUP }, - { 0xfe46, KEY_POWER2 }, - { 0xfe0a, KEY_EPG }, - { 0xfe49, KEY_BACK }, - { 0xfe4d, KEY_MENU }, - { 0xfe51, KEY_UP }, - { 0xfe5b, KEY_LEFT }, - { 0xfe5f, KEY_RIGHT }, - { 0xfe53, KEY_DOWN }, - { 0xfe5e, KEY_OK }, - { 0xfe59, KEY_INFO }, - { 0xfe55, KEY_TAB }, - { 0xfe0f, KEY_PREVIOUSSONG },/* Replay */ - { 0xfe12, KEY_NEXTSONG }, /* Skip */ - { 0xfe42, KEY_ENTER }, /* Windows/Start */ - { 0xfe15, KEY_VOLUMEUP }, - { 0xfe05, KEY_VOLUMEDOWN }, - { 0xfe11, KEY_CHANNELUP }, - { 0xfe09, KEY_CHANNELDOWN }, - { 0xfe52, KEY_CAMERA }, - { 0xfe5a, KEY_TUNER }, /* Live */ - { 0xfe19, KEY_OPEN }, - { 0xfe0b, KEY_1 }, - { 0xfe17, KEY_2 }, - { 0xfe1b, KEY_3 }, - { 0xfe07, KEY_4 }, - { 0xfe50, KEY_5 }, - { 0xfe54, KEY_6 }, - { 0xfe48, KEY_7 }, - { 0xfe4c, KEY_8 }, - { 0xfe58, KEY_9 }, - { 0xfe13, KEY_ANGLE }, /* Aspect */ - { 0xfe03, KEY_0 }, - { 0xfe1f, KEY_ZOOM }, - { 0xfe43, KEY_REWIND }, - { 0xfe47, KEY_PLAYPAUSE }, - { 0xfe4f, KEY_FASTFORWARD }, - { 0xfe57, KEY_MUTE }, - { 0xfe0d, KEY_STOP }, - { 0xfe01, KEY_RECORD }, - { 0xfe4e, KEY_POWER }, -}; - -static struct rc_map_table rc_map_dvico_portable_table[] = { - { 0xfc02, KEY_SETUP }, /* Profile */ - { 0xfc43, KEY_POWER2 }, - { 0xfc06, KEY_EPG }, - { 0xfc5a, KEY_BACK }, - { 0xfc05, KEY_MENU }, - { 0xfc47, KEY_INFO }, - { 0xfc01, KEY_TAB }, - { 0xfc42, KEY_PREVIOUSSONG },/* Replay */ - { 0xfc49, KEY_VOLUMEUP }, - { 0xfc09, KEY_VOLUMEDOWN }, - { 0xfc54, KEY_CHANNELUP }, - { 0xfc0b, KEY_CHANNELDOWN }, - { 0xfc16, KEY_CAMERA }, - { 0xfc40, KEY_TUNER }, /* ATV/DTV */ - { 0xfc45, KEY_OPEN }, - { 0xfc19, KEY_1 }, - { 0xfc18, KEY_2 }, - { 0xfc1b, KEY_3 }, - { 0xfc1a, KEY_4 }, - { 0xfc58, KEY_5 }, - { 0xfc59, KEY_6 }, - { 0xfc15, KEY_7 }, - { 0xfc14, KEY_8 }, - { 0xfc17, KEY_9 }, - { 0xfc44, KEY_ANGLE }, /* Aspect */ - { 0xfc55, KEY_0 }, - { 0xfc07, KEY_ZOOM }, - { 0xfc0a, KEY_REWIND }, - { 0xfc08, KEY_PLAYPAUSE }, - { 0xfc4b, KEY_FASTFORWARD }, - { 0xfc5b, KEY_MUTE }, - { 0xfc04, KEY_STOP }, - { 0xfc56, KEY_RECORD }, - { 0xfc57, KEY_POWER }, - { 0xfc41, KEY_UNKNOWN }, /* INPUT */ - { 0xfc00, KEY_UNKNOWN }, /* HD */ -}; - -static struct rc_map_table rc_map_d680_dmb_table[] = { - { 0x0038, KEY_UNKNOWN }, /* TV/AV */ - { 0x080c, KEY_ZOOM }, - { 0x0800, KEY_0 }, - { 0x0001, KEY_1 }, - { 0x0802, KEY_2 }, - { 0x0003, KEY_3 }, - { 0x0804, KEY_4 }, - { 0x0005, KEY_5 }, - { 0x0806, KEY_6 }, - { 0x0007, KEY_7 }, - { 0x0808, KEY_8 }, - { 0x0009, KEY_9 }, - { 0x000a, KEY_MUTE }, - { 0x0829, KEY_BACK }, - { 0x0012, KEY_CHANNELUP }, - { 0x0813, KEY_CHANNELDOWN }, - { 0x002b, KEY_VOLUMEUP }, - { 0x082c, KEY_VOLUMEDOWN }, - { 0x0020, KEY_UP }, - { 0x0821, KEY_DOWN }, - { 0x0011, KEY_LEFT }, - { 0x0810, KEY_RIGHT }, - { 0x000d, KEY_OK }, - { 0x081f, KEY_RECORD }, - { 0x0017, KEY_PLAYPAUSE }, - { 0x0816, KEY_PLAYPAUSE }, - { 0x000b, KEY_STOP }, - { 0x0827, KEY_FASTFORWARD }, - { 0x0026, KEY_REWIND }, - { 0x081e, KEY_UNKNOWN }, /* Time Shift */ - { 0x000e, KEY_UNKNOWN }, /* Snapshot */ - { 0x082d, KEY_UNKNOWN }, /* Mouse Cursor */ - { 0x000f, KEY_UNKNOWN }, /* Minimize/Maximize */ - { 0x0814, KEY_UNKNOWN }, /* Shuffle */ - { 0x0025, KEY_POWER }, -}; - -static int cxusb_dee1601_demod_init(struct dvb_frontend* fe) -{ - static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; - static u8 reset [] = { RESET, 0x80 }; - static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; - static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; - static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; - static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; - - mt352_write(fe, clock_config, sizeof(clock_config)); - udelay(200); - mt352_write(fe, reset, sizeof(reset)); - mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); - - mt352_write(fe, agc_cfg, sizeof(agc_cfg)); - mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); - mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); - - return 0; -} - -static int cxusb_mt352_demod_init(struct dvb_frontend* fe) -{ /* used in both lgz201 and th7579 */ - static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x29 }; - static u8 reset [] = { RESET, 0x80 }; - static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; - static u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 }; - static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; - static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; - - mt352_write(fe, clock_config, sizeof(clock_config)); - udelay(200); - mt352_write(fe, reset, sizeof(reset)); - mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); - - mt352_write(fe, agc_cfg, sizeof(agc_cfg)); - mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); - mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); - return 0; -} - -static struct cx22702_config cxusb_cx22702_config = { - .demod_address = 0x63, - .output_mode = CX22702_PARALLEL_OUTPUT, -}; - -static struct lgdt330x_config cxusb_lgdt3303_config = { - .demod_address = 0x0e, - .demod_chip = LGDT3303, -}; - -static struct lgdt330x_config cxusb_aver_lgdt3303_config = { - .demod_address = 0x0e, - .demod_chip = LGDT3303, - .clock_polarity_flip = 2, -}; - -static struct mt352_config cxusb_dee1601_config = { - .demod_address = 0x0f, - .demod_init = cxusb_dee1601_demod_init, -}; - -static struct zl10353_config cxusb_zl10353_dee1601_config = { - .demod_address = 0x0f, - .parallel_ts = 1, -}; - -static struct mt352_config cxusb_mt352_config = { - /* used in both lgz201 and th7579 */ - .demod_address = 0x0f, - .demod_init = cxusb_mt352_demod_init, -}; - -static struct zl10353_config cxusb_zl10353_xc3028_config = { - .demod_address = 0x0f, - .if2 = 45600, - .no_tuner = 1, - .parallel_ts = 1, -}; - -static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = { - .demod_address = 0x0f, - .if2 = 45600, - .no_tuner = 1, - .parallel_ts = 1, - .disable_i2c_gate_ctrl = 1, -}; - -static struct mt352_config cxusb_mt352_xc3028_config = { - .demod_address = 0x0f, - .if2 = 4560, - .no_tuner = 1, - .demod_init = cxusb_mt352_demod_init, -}; - -/* FIXME: needs tweaking */ -static struct mxl5005s_config aver_a868r_tuner = { - .i2c_address = 0x63, - .if_freq = 6000000UL, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_C, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -/* FIXME: needs tweaking */ -static struct mxl5005s_config d680_dmb_tuner = { - .i2c_address = 0x63, - .if_freq = 36125000UL, - .xtal_freq = CRYSTAL_FREQ_16000000HZ, - .agc_mode = MXL_SINGLE_AGC, - .tracking_filter = MXL_TF_C, - .rssi_enable = MXL_RSSI_ENABLE, - .cap_select = MXL_CAP_SEL_ENABLE, - .div_out = MXL_DIV_OUT_4, - .clock_out = MXL_CLOCK_OUT_DISABLE, - .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, - .top = MXL5005S_TOP_25P2, - .mod_mode = MXL_DIGITAL_MODE, - .if_mode = MXL_ZERO_IF, - .AgcMasterByte = 0x00, -}; - -static struct max2165_config mygica_d689_max2165_cfg = { - .i2c_address = 0x60, - .osc_clk = 20 -}; - -/* Callbacks for DVB USB */ -static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0x61, - TUNER_PHILIPS_FMD1216ME_MK3); - return 0; -} - -static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, - NULL, DVB_PLL_THOMSON_DTT7579); - return 0; -} - -static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_LG_Z201); - return 0; -} - -static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, - NULL, DVB_PLL_THOMSON_DTT7579); - return 0; -} - -static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); - return 0; -} - -static int dvico_bluebird_xc2028_callback(void *ptr, int component, - int command, int arg) -{ - struct dvb_usb_adapter *adap = ptr; - struct dvb_usb_device *d = adap->dev; - - switch (command) { - case XC2028_TUNER_RESET: - deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg); - cxusb_bluebird_gpio_pulse(d, 0x01, 1); - break; - case XC2028_RESET_CLK: - deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg); - break; - default: - deb_info("%s: unknown command %d, arg %d\n", __func__, - command, arg); - return -EINVAL; - } - - return 0; -} - -static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_frontend *fe; - struct xc2028_config cfg = { - .i2c_adap = &adap->dev->i2c_adap, - .i2c_addr = 0x61, - }; - static struct xc2028_ctrl ctl = { - .fname = XC2028_DEFAULT_FIRMWARE, - .max_len = 64, - .demod = XC3028_FE_ZARLINK456, - }; - - /* FIXME: generalize & move to common area */ - adap->fe_adap[0].fe->callback = dvico_bluebird_xc2028_callback; - - fe = dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &cfg); - if (fe == NULL || fe->ops.tuner_ops.set_config == NULL) - return -EIO; - - fe->ops.tuner_ops.set_config(fe, &ctl); - - return 0; -} - -static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &aver_a868r_tuner); - return 0; -} - -static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_frontend *fe; - fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &d680_dmb_tuner); - return (fe == NULL) ? -EIO : 0; -} - -static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_frontend *fe; - fe = dvb_attach(max2165_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, &mygica_d689_max2165_cfg); - return (fe == NULL) ? -EIO : 0; -} - -static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) -{ - u8 b; - if (usb_set_interface(adap->dev->udev, 0, 6) < 0) - err("set interface failed"); - - cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1); - - adap->fe_adap[0].fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) - return 0; - - return -EIO; -} - -static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev, 0, 7) < 0) - err("set interface failed"); - - cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); - - adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, - &cxusb_lgdt3303_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) - return 0; - - return -EIO; -} - -static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) -{ - adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe != NULL) - return 0; - - return -EIO; -} - -static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap) -{ - /* used in both lgz201 and th7579 */ - if (usb_set_interface(adap->dev->udev, 0, 0) < 0) - err("set interface failed"); - - cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); - - adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_mt352_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) - return 0; - - return -EIO; -} - -static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev, 0, 0) < 0) - err("set interface failed"); - - cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); - - adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_dee1601_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) - return 0; - - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, - &cxusb_zl10353_dee1601_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) - return 0; - - return -EIO; -} - -static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap) -{ - u8 ircode[4]; - int i; - struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD, - .buf = ircode, .len = 4 }; - - if (usb_set_interface(adap->dev->udev, 0, 1) < 0) - err("set interface failed"); - - cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); - - /* reset the tuner and demodulator */ - cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); - cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); - cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); - - adap->fe_adap[0].fe = - dvb_attach(zl10353_attach, - &cxusb_zl10353_xc3028_config_no_i2c_gate, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) == NULL) - return -EIO; - - /* try to determine if there is no IR decoder on the I2C bus */ - for (i = 0; adap->dev->props.rc.legacy.rc_map_table != NULL && i < 5; i++) { - msleep(20); - if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1) - goto no_IR; - if (ircode[0] == 0 && ircode[1] == 0) - continue; - if (ircode[2] + ircode[3] != 0xff) { -no_IR: - adap->dev->props.rc.legacy.rc_map_table = NULL; - info("No IR receiver detected on this device."); - break; - } - } - - return 0; -} - -static struct dibx000_agc_config dib7070_agc_config = { - .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, - - /* - * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, - * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, - * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 - */ - .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | - (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), - .inv_gain = 600, - .time_stabiliz = 10, - .alpha_level = 0, - .thlock = 118, - .wbd_inv = 0, - .wbd_ref = 3530, - .wbd_sel = 1, - .wbd_alpha = 5, - .agc1_max = 65535, - .agc1_min = 0, - .agc2_max = 65535, - .agc2_min = 0, - .agc1_pt1 = 0, - .agc1_pt2 = 40, - .agc1_pt3 = 183, - .agc1_slope1 = 206, - .agc1_slope2 = 255, - .agc2_pt1 = 72, - .agc2_pt2 = 152, - .agc2_slope1 = 88, - .agc2_slope2 = 90, - .alpha_mant = 17, - .alpha_exp = 27, - .beta_mant = 23, - .beta_exp = 51, - .perform_agc_softsplit = 0, -}; - -static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { - .internal = 60000, - .sampling = 15000, - .pll_prediv = 1, - .pll_ratio = 20, - .pll_range = 3, - .pll_reset = 1, - .pll_bypass = 0, - .enable_refdiv = 0, - .bypclk_div = 0, - .IO_CLK_en_core = 1, - .ADClkSrc = 1, - .modulo = 2, - /* refsel, sel, freq_15k */ - .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), - .ifreq = (0 << 25) | 0, - .timf = 20452225, - .xtal_hz = 12000000, -}; - -static struct dib7000p_config cxusb_dualdig4_rev2_config = { - .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 1, - .agc = &dib7070_agc_config, - .bw = &dib7070_bw_config_12_mhz, - .tuner_is_baseband = 1, - .spur_protect = 1, - - .gpio_dir = 0xfcef, - .gpio_val = 0x0110, - - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, -}; - -static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev, 0, 1) < 0) - err("set interface failed"); - - cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); - - cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, - &cxusb_dualdig4_rev2_config) < 0) { - printk(KERN_WARNING "Unable to enumerate dib7000p\n"); - return -ENODEV; - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, - &cxusb_dualdig4_rev2_config); - if (adap->fe_adap[0].fe == NULL) - return -EIO; - - return 0; -} - -static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) -{ - return dib7000p_set_gpio(fe, 8, 0, !onoff); -} - -static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) -{ - return 0; -} - -static struct dib0070_config dib7070p_dib0070_config = { - .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib7070_tuner_reset, - .sleep = dib7070_tuner_sleep, - .clock_khz = 12000, -}; - -struct dib0700_adapter_state { - int (*set_param_save) (struct dvb_frontend *); -}; - -static int dib7070_set_param_override(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dib0700_adapter_state *state = adap->priv; - - u16 offset; - u8 band = BAND_OF_FREQUENCY(p->frequency/1000); - switch (band) { - case BAND_VHF: offset = 950; break; - default: - case BAND_UHF: offset = 550; break; - } - - dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); - - return state->set_param_save(fe); -} - -static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = - dib7000p_get_i2c_master(adap->fe_adap[0].fe, - DIBX000_I2C_INTERFACE_TUNER, 1); - - if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, - &dib7070p_dib0070_config) == NULL) - return -ENODEV; - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override; - return 0; -} - -static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev, 0, 1) < 0) - err("set interface failed"); - - cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); - - /* reset the tuner and demodulator */ - cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); - cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); - cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); - - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, - &cxusb_zl10353_xc3028_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) - return 0; - - adap->fe_adap[0].fe = dvb_attach(mt352_attach, - &cxusb_mt352_xc3028_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) - return 0; - - return -EIO; -} - -static struct lgs8gxx_config d680_lgs8gl5_cfg = { - .prod = LGS8GXX_PROD_LGS8GL5, - .demod_address = 0x19, - .serial_ts = 0, - .ts_clk_pol = 0, - .ts_clk_gated = 1, - .if_clk_freq = 30400, /* 30.4 MHz */ - .if_freq = 5725, /* 5.725 MHz */ - .if_neg_center = 0, - .ext_adc = 0, - .adc_signed = 0, - .if_neg_edge = 0, -}; - -static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - int n; - - /* Select required USB configuration */ - if (usb_set_interface(d->udev, 0, 0) < 0) - err("set interface failed"); - - /* Unblock all USB pipes */ - usb_clear_halt(d->udev, - usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); - usb_clear_halt(d->udev, - usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); - usb_clear_halt(d->udev, - usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint)); - - /* Drain USB pipes to avoid hang after reboot */ - for (n = 0; n < 5; n++) { - cxusb_d680_dmb_drain_message(d); - cxusb_d680_dmb_drain_video(d); - msleep(200); - } - - /* Reset the tuner */ - if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { - err("clear tuner gpio failed"); - return -EIO; - } - msleep(100); - if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { - err("set tuner gpio failed"); - return -EIO; - } - msleep(100); - - /* Attach frontend */ - adap->fe_adap[0].fe = dvb_attach(lgs8gxx_attach, &d680_lgs8gl5_cfg, &d->i2c_adap); - if (adap->fe_adap[0].fe == NULL) - return -EIO; - - return 0; -} - -static struct atbm8830_config mygica_d689_atbm8830_cfg = { - .prod = ATBM8830_PROD_8830, - .demod_address = 0x40, - .serial_ts = 0, - .ts_sampling_edge = 1, - .ts_clk_gated = 0, - .osc_clk_freq = 30400, /* in kHz */ - .if_freq = 0, /* zero IF */ - .zif_swap_iq = 1, - .agc_min = 0x2E, - .agc_max = 0x90, - .agc_hold_loop = 0, -}; - -static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - - /* Select required USB configuration */ - if (usb_set_interface(d->udev, 0, 0) < 0) - err("set interface failed"); - - /* Unblock all USB pipes */ - usb_clear_halt(d->udev, - usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); - usb_clear_halt(d->udev, - usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); - usb_clear_halt(d->udev, - usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint)); - - - /* Reset the tuner */ - if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { - err("clear tuner gpio failed"); - return -EIO; - } - msleep(100); - if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { - err("set tuner gpio failed"); - return -EIO; - } - msleep(100); - - /* Attach frontend */ - adap->fe_adap[0].fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg, - &d->i2c_adap); - if (adap->fe_adap[0].fe == NULL) - return -EIO; - - return 0; -} - -/* - * DViCO has shipped two devices with the same USB ID, but only one of them - * needs a firmware download. Check the device class details to see if they - * have non-default values to decide whether the device is actually cold or - * not, and forget a match if it turns out we selected the wrong device. - */ -static int bluebird_fx2_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - int wascold = *cold; - - *cold = udev->descriptor.bDeviceClass == 0xff && - udev->descriptor.bDeviceSubClass == 0xff && - udev->descriptor.bDeviceProtocol == 0xff; - - if (*cold && !wascold) - *desc = NULL; - - return 0; -} - -/* - * DViCO bluebird firmware needs the "warm" product ID to be patched into the - * firmware file before download. - */ - -static const int dvico_firmware_id_offsets[] = { 6638, 3204 }; -static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, - const struct firmware *fw) -{ - int pos; - - for (pos = 0; pos < ARRAY_SIZE(dvico_firmware_id_offsets); pos++) { - int idoff = dvico_firmware_id_offsets[pos]; - - if (fw->size < idoff + 4) - continue; - - if (fw->data[idoff] == (USB_VID_DVICO & 0xff) && - fw->data[idoff + 1] == USB_VID_DVICO >> 8) { - struct firmware new_fw; - u8 *new_fw_data = vmalloc(fw->size); - int ret; - - if (!new_fw_data) - return -ENOMEM; - - memcpy(new_fw_data, fw->data, fw->size); - new_fw.size = fw->size; - new_fw.data = new_fw_data; - - new_fw_data[idoff + 2] = - le16_to_cpu(udev->descriptor.idProduct) + 1; - new_fw_data[idoff + 3] = - le16_to_cpu(udev->descriptor.idProduct) >> 8; - - ret = usb_cypress_load_firmware(udev, &new_fw, - CYPRESS_FX2); - vfree(new_fw_data); - return ret; - } - } - - return -EINVAL; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties cxusb_medion_properties; -static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties; -static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties; -static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties; -static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties; -static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties; -static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; -static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; -static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; -static struct dvb_usb_device_properties cxusb_aver_a868r_properties; -static struct dvb_usb_device_properties cxusb_d680_dmb_properties; -static struct dvb_usb_device_properties cxusb_mygica_d689_properties; - -static int cxusb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &cxusb_bluebird_nano2_needsfirmware_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, - &cxusb_bluebird_dualdig4_rev2_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, - THIS_MODULE, NULL, adapter_nr) || - 0) - return 0; - - return -EINVAL; -} - -static struct usb_device_id cxusb_table [] = { - { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, - { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, - { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, - { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) }, - { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) }, - {} /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, cxusb_table); - -static struct dvb_usb_device_properties cxusb_medion_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_cx22702_frontend_attach, - .tuner_attach = cxusb_fmd1216me_tuner_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - .power_ctrl = cxusb_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Medion MD95700 (MDUSBTV-HYBRID)", - { NULL }, - { &cxusb_table[0], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-bluebird-01.fw", - .download_firmware = bluebird_patch_dvico_firmware_download, - /* use usb alt setting 0 for EP4 transfer (dvb-t), - use usb alt setting 7 for EP2 transfer (atsc) */ - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_lgdt3303_frontend_attach, - .tuner_attach = cxusb_lgh064f_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_bluebird_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_dvico_portable_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), - .rc_query = cxusb_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "DViCO FusionHDTV5 USB Gold", - { &cxusb_table[1], NULL }, - { &cxusb_table[2], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-bluebird-01.fw", - .download_firmware = bluebird_patch_dvico_firmware_download, - /* use usb alt setting 0 for EP4 transfer (dvb-t), - use usb alt setting 7 for EP2 transfer (atsc) */ - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_dee1601_frontend_attach, - .tuner_attach = cxusb_dee1601_tuner_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x04, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_bluebird_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .rc.legacy = { - .rc_interval = 150, - .rc_map_table = rc_map_dvico_mce_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table), - .rc_query = cxusb_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 3, - .devices = { - { "DViCO FusionHDTV DVB-T Dual USB", - { &cxusb_table[3], NULL }, - { &cxusb_table[4], NULL }, - }, - { "DigitalNow DVB-T Dual USB", - { &cxusb_table[9], NULL }, - { &cxusb_table[10], NULL }, - }, - { "DViCO FusionHDTV DVB-T Dual Digital 2", - { &cxusb_table[11], NULL }, - { &cxusb_table[12], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-bluebird-01.fw", - .download_firmware = bluebird_patch_dvico_firmware_download, - /* use usb alt setting 0 for EP4 transfer (dvb-t), - use usb alt setting 7 for EP2 transfer (atsc) */ - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_mt352_frontend_attach, - .tuner_attach = cxusb_lgz201_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x04, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - .power_ctrl = cxusb_bluebird_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_dvico_portable_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), - .rc_query = cxusb_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - .num_device_descs = 1, - .devices = { - { "DViCO FusionHDTV DVB-T USB (LGZ201)", - { &cxusb_table[5], NULL }, - { &cxusb_table[6], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-bluebird-01.fw", - .download_firmware = bluebird_patch_dvico_firmware_download, - /* use usb alt setting 0 for EP4 transfer (dvb-t), - use usb alt setting 7 for EP2 transfer (atsc) */ - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_mt352_frontend_attach, - .tuner_attach = cxusb_dtt7579_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x04, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - .power_ctrl = cxusb_bluebird_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_dvico_portable_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), - .rc_query = cxusb_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "DViCO FusionHDTV DVB-T USB (TH7579)", - { &cxusb_table[7], NULL }, - { &cxusb_table[8], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_dualdig4_frontend_attach, - .tuner_attach = cxusb_dvico_xc3028_tuner_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_dvico_mce_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table), - .rc_query = cxusb_bluebird2_rc_query, - }, - - .num_device_descs = 1, - .devices = { - { "DViCO FusionHDTV DVB-T Dual Digital 4", - { NULL }, - { &cxusb_table[13], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .identify_state = bluebird_fx2_identify_state, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_nano2_frontend_attach, - .tuner_attach = cxusb_dvico_xc3028_tuner_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_nano2_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_dvico_portable_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), - .rc_query = cxusb_bluebird2_rc_query, - }, - - .num_device_descs = 1, - .devices = { - { "DViCO FusionHDTV DVB-T NANO2", - { NULL }, - { &cxusb_table[14], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-bluebird-02.fw", - .download_firmware = bluebird_patch_dvico_firmware_download, - .identify_state = bluebird_fx2_identify_state, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_nano2_frontend_attach, - .tuner_attach = cxusb_dvico_xc3028_tuner_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_nano2_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_dvico_portable_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), - .rc_query = cxusb_rc_query, - }, - - .num_device_descs = 1, - .devices = { - { "DViCO FusionHDTV DVB-T NANO2 w/o firmware", - { &cxusb_table[14], NULL }, - { &cxusb_table[15], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_aver_streaming_ctrl, - .frontend_attach = cxusb_aver_lgdt3303_frontend_attach, - .tuner_attach = cxusb_mxl5003s_tuner_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x04, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - .power_ctrl = cxusb_aver_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "AVerMedia AVerTVHD Volar (A868R)", - { NULL }, - { &cxusb_table[16], NULL }, - }, - } -}; - -static -struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .size_of_priv = sizeof(struct dib0700_adapter_state), - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, - .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_bluebird_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_dvico_mce_table, - .rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table), - .rc_query = cxusb_rc_query, - }, - - .num_device_descs = 1, - .devices = { - { "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)", - { NULL }, - { &cxusb_table[17], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_d680_dmb_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, - .frontend_attach = cxusb_d680_dmb_frontend_attach, - .tuner_attach = cxusb_d680_dmb_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_d680_dmb_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_d680_dmb_table, - .rc_map_size = ARRAY_SIZE(rc_map_d680_dmb_table), - .rc_query = cxusb_d680_dmb_rc_query, - }, - - .num_device_descs = 1, - .devices = { - { - "Conexant DMB-TH Stick", - { NULL }, - { &cxusb_table[18], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties cxusb_mygica_d689_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, - .frontend_attach = cxusb_mygica_d689_frontend_attach, - .tuner_attach = cxusb_mygica_d689_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - }, - }, - - .power_ctrl = cxusb_d680_dmb_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_d680_dmb_table, - .rc_map_size = ARRAY_SIZE(rc_map_d680_dmb_table), - .rc_query = cxusb_d680_dmb_rc_query, - }, - - .num_device_descs = 1, - .devices = { - { - "Mygica D689 DMB-TH", - { NULL }, - { &cxusb_table[19], NULL }, - }, - } -}; - -static struct usb_driver cxusb_driver = { - .name = "dvb_usb_cxusb", - .probe = cxusb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = cxusb_table, -}; - -module_usb_driver(cxusb_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); -MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); -MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); -MODULE_VERSION("1.0-alpha"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/dvb/dvb-usb/cxusb.h deleted file mode 100644 index 1a51eafd31b9..000000000000 --- a/drivers/media/dvb/dvb-usb/cxusb.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _DVB_USB_CXUSB_H_ -#define _DVB_USB_CXUSB_H_ - -#define DVB_USB_LOG_PREFIX "cxusb" -#include "dvb-usb.h" - -/* usb commands - some of it are guesses, don't have a reference yet */ -#define CMD_BLUEBIRD_GPIO_RW 0x05 - -#define CMD_I2C_WRITE 0x08 -#define CMD_I2C_READ 0x09 - -#define CMD_GPIO_READ 0x0d -#define CMD_GPIO_WRITE 0x0e -#define GPIO_TUNER 0x02 - -#define CMD_POWER_OFF 0xdc -#define CMD_POWER_ON 0xde - -#define CMD_STREAMING_ON 0x36 -#define CMD_STREAMING_OFF 0x37 - -#define CMD_AVER_STREAM_ON 0x18 -#define CMD_AVER_STREAM_OFF 0x19 - -#define CMD_GET_IR_CODE 0x47 - -#define CMD_ANALOG 0x50 -#define CMD_DIGITAL 0x51 - -struct cxusb_state { - u8 gpio_write_state[3]; -}; - -#endif diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h deleted file mode 100644 index 7de125c0b36f..000000000000 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ /dev/null @@ -1,75 +0,0 @@ -/* Linux driver for devices based on the DiBcom DiB0700 USB bridge - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * Copyright (C) 2005-6 DiBcom, SA - */ -#ifndef _DIB0700_H_ -#define _DIB0700_H_ - -#define DVB_USB_LOG_PREFIX "dib0700" -#include "dvb-usb.h" - -#include "dib07x0.h" - -extern int dvb_usb_dib0700_debug; -#define deb_info(args...) dprintk(dvb_usb_dib0700_debug,0x01,args) -#define deb_fw(args...) dprintk(dvb_usb_dib0700_debug,0x02,args) -#define deb_fwdata(args...) dprintk(dvb_usb_dib0700_debug,0x04,args) -#define deb_data(args...) dprintk(dvb_usb_dib0700_debug,0x08,args) - -#define REQUEST_SET_USB_XFER_LEN 0x0 /* valid only for firmware version */ - /* higher than 1.21 */ -#define REQUEST_I2C_READ 0x2 -#define REQUEST_I2C_WRITE 0x3 -#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */ -#define REQUEST_JUMPRAM 0x8 -#define REQUEST_SET_CLOCK 0xB -#define REQUEST_SET_GPIO 0xC -#define REQUEST_ENABLE_VIDEO 0xF - // 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog) - // 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1) - // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " ) -#define REQUEST_SET_I2C_PARAM 0x10 -#define REQUEST_SET_RC 0x11 -#define REQUEST_NEW_I2C_READ 0x12 -#define REQUEST_NEW_I2C_WRITE 0x13 -#define REQUEST_GET_VERSION 0x15 - -struct dib0700_state { - u8 channel_state; - u16 mt2060_if1[2]; - u8 rc_toggle; - u8 rc_counter; - u8 is_dib7000pc; - u8 fw_use_new_i2c_api; - u8 disable_streaming_master_mode; - u32 fw_version; - u32 nb_packet_buffer_size; - int (*read_status)(struct dvb_frontend *, fe_status_t *); - int (*sleep)(struct dvb_frontend* fe); - u8 buf[255]; -}; - -extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, - u32 *romversion, u32 *ramversion, u32 *fwtype); -extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); -extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); -extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen); -extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw); -extern int dib0700_rc_setup(struct dvb_usb_device *d); -extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); -extern struct i2c_algorithm dib0700_i2c_algo; -extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, int *cold); -extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type); -extern int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz); - -extern int dib0700_device_count; -extern int dvb_usb_dib0700_ir_proto; -extern struct dvb_usb_device_properties dib0700_devices[]; -extern struct usb_device_id dib0700_usb_id_table[]; - -#endif diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c deleted file mode 100644 index ef87229de6af..000000000000 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ /dev/null @@ -1,845 +0,0 @@ -/* Linux driver for devices based on the DiBcom DiB0700 USB bridge - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * Copyright (C) 2005-6 DiBcom, SA - */ -#include "dib0700.h" - -/* debug */ -int dvb_usb_dib0700_debug; -module_param_named(debug,dvb_usb_dib0700_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS); - -static int nb_packet_buffer_size = 21; -module_param(nb_packet_buffer_size, int, 0644); -MODULE_PARM_DESC(nb_packet_buffer_size, - "Set the dib0700 driver data buffer size. This parameter " - "corresponds to the number of TS packets. The actual size of " - "the data buffer corresponds to this parameter " - "multiplied by 188 (default: 21)"); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - - -int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, - u32 *romversion, u32 *ramversion, u32 *fwtype) -{ - struct dib0700_state *st = d->priv; - int ret; - - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - return -EINTR; - } - - ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), - REQUEST_GET_VERSION, - USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, - st->buf, 16, USB_CTRL_GET_TIMEOUT); - if (hwversion != NULL) - *hwversion = (st->buf[0] << 24) | (st->buf[1] << 16) | - (st->buf[2] << 8) | st->buf[3]; - if (romversion != NULL) - *romversion = (st->buf[4] << 24) | (st->buf[5] << 16) | - (st->buf[6] << 8) | st->buf[7]; - if (ramversion != NULL) - *ramversion = (st->buf[8] << 24) | (st->buf[9] << 16) | - (st->buf[10] << 8) | st->buf[11]; - if (fwtype != NULL) - *fwtype = (st->buf[12] << 24) | (st->buf[13] << 16) | - (st->buf[14] << 8) | st->buf[15]; - mutex_unlock(&d->usb_mutex); - return ret; -} - -/* expecting rx buffer: request data[0] data[1] ... data[2] */ -static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) -{ - int status; - - deb_data(">>> "); - debug_dump(tx, txlen, deb_data); - - status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0), - tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen, - USB_CTRL_GET_TIMEOUT); - - if (status != txlen) - deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen); - - return status < 0 ? status : 0; -} - -/* expecting tx buffer: request data[0] ... data[n] (n <= 4) */ -int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen) -{ - u16 index, value; - int status; - - if (txlen < 2) { - err("tx buffer length is smaller than 2. Makes no sense."); - return -EINVAL; - } - if (txlen > 4) { - err("tx buffer length is larger than 4. Not supported."); - return -EINVAL; - } - - deb_data(">>> "); - debug_dump(tx,txlen,deb_data); - - value = ((txlen - 2) << 8) | tx[1]; - index = 0; - if (txlen > 2) - index |= (tx[2] << 8); - if (txlen > 3) - index |= tx[3]; - - status = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), tx[0], - USB_TYPE_VENDOR | USB_DIR_IN, value, index, rx, rxlen, - USB_CTRL_GET_TIMEOUT); - - if (status < 0) - deb_info("ep 0 read error (status = %d)\n",status); - - deb_data("<<< "); - debug_dump(rx, rxlen, deb_data); - - return status; /* length in case of success */ -} - -int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val) -{ - struct dib0700_state *st = d->priv; - int ret; - - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - return -EINTR; - } - - st->buf[0] = REQUEST_SET_GPIO; - st->buf[1] = gpio; - st->buf[2] = ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6); - - ret = dib0700_ctrl_wr(d, st->buf, 3); - - mutex_unlock(&d->usb_mutex); - return ret; -} - -static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets) -{ - struct dib0700_state *st = d->priv; - int ret; - - if (st->fw_version >= 0x10201) { - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - return -EINTR; - } - - st->buf[0] = REQUEST_SET_USB_XFER_LEN; - st->buf[1] = (nb_ts_packets >> 8) & 0xff; - st->buf[2] = nb_ts_packets & 0xff; - - deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets); - - ret = dib0700_ctrl_wr(d, st->buf, 3); - mutex_unlock(&d->usb_mutex); - } else { - deb_info("this firmware does not allow to change the USB xfer len\n"); - ret = -EIO; - } - - return ret; -} - -/* - * I2C master xfer function (supported in 1.20 firmware) - */ -static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, - int num) -{ - /* The new i2c firmware messages are more reliable and in particular - properly support i2c read calls not preceded by a write */ - - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct dib0700_state *st = d->priv; - uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */ - uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */ - uint8_t en_start = 0; - uint8_t en_stop = 0; - int result, i; - - /* Ensure nobody else hits the i2c bus while we're sending our - sequence of messages, (such as the remote control thread) */ - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EINTR; - - for (i = 0; i < num; i++) { - if (i == 0) { - /* First message in the transaction */ - en_start = 1; - } else if (!(msg[i].flags & I2C_M_NOSTART)) { - /* Device supports repeated-start */ - en_start = 1; - } else { - /* Not the first packet and device doesn't support - repeated start */ - en_start = 0; - } - if (i == (num - 1)) { - /* Last message in the transaction */ - en_stop = 1; - } - - if (msg[i].flags & I2C_M_RD) { - /* Read request */ - u16 index, value; - uint8_t i2c_dest; - - i2c_dest = (msg[i].addr << 1); - value = ((en_start << 7) | (en_stop << 6) | - (msg[i].len & 0x3F)) << 8 | i2c_dest; - /* I2C ctrl + FE bus; */ - index = ((gen_mode << 6) & 0xC0) | - ((bus_mode << 4) & 0x30); - - result = usb_control_msg(d->udev, - usb_rcvctrlpipe(d->udev, 0), - REQUEST_NEW_I2C_READ, - USB_TYPE_VENDOR | USB_DIR_IN, - value, index, msg[i].buf, - msg[i].len, - USB_CTRL_GET_TIMEOUT); - if (result < 0) { - deb_info("i2c read error (status = %d)\n", result); - break; - } - - deb_data("<<< "); - debug_dump(msg[i].buf, msg[i].len, deb_data); - - } else { - /* Write request */ - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - mutex_unlock(&d->i2c_mutex); - return -EINTR; - } - st->buf[0] = REQUEST_NEW_I2C_WRITE; - st->buf[1] = msg[i].addr << 1; - st->buf[2] = (en_start << 7) | (en_stop << 6) | - (msg[i].len & 0x3F); - /* I2C ctrl + FE bus; */ - st->buf[3] = ((gen_mode << 6) & 0xC0) | - ((bus_mode << 4) & 0x30); - /* The Actual i2c payload */ - memcpy(&st->buf[4], msg[i].buf, msg[i].len); - - deb_data(">>> "); - debug_dump(st->buf, msg[i].len + 4, deb_data); - - result = usb_control_msg(d->udev, - usb_sndctrlpipe(d->udev, 0), - REQUEST_NEW_I2C_WRITE, - USB_TYPE_VENDOR | USB_DIR_OUT, - 0, 0, st->buf, msg[i].len + 4, - USB_CTRL_GET_TIMEOUT); - mutex_unlock(&d->usb_mutex); - if (result < 0) { - deb_info("i2c write error (status = %d)\n", result); - break; - } - } - } - mutex_unlock(&d->i2c_mutex); - return i; -} - -/* - * I2C master xfer function (pre-1.20 firmware) - */ -static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, - struct i2c_msg *msg, int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct dib0700_state *st = d->priv; - int i,len; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EINTR; - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - mutex_unlock(&d->i2c_mutex); - return -EINTR; - } - - for (i = 0; i < num; i++) { - /* fill in the address */ - st->buf[1] = msg[i].addr << 1; - /* fill the buffer */ - memcpy(&st->buf[2], msg[i].buf, msg[i].len); - - /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - st->buf[0] = REQUEST_I2C_READ; - st->buf[1] |= 1; - - /* special thing in the current firmware: when length is zero the read-failed */ - len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2, - msg[i+1].buf, msg[i+1].len); - if (len <= 0) { - deb_info("I2C read failed on address 0x%02x\n", - msg[i].addr); - break; - } - - msg[i+1].len = len; - - i++; - } else { - st->buf[0] = REQUEST_I2C_WRITE; - if (dib0700_ctrl_wr(d, st->buf, msg[i].len + 2) < 0) - break; - } - } - mutex_unlock(&d->usb_mutex); - mutex_unlock(&d->i2c_mutex); - - return i; -} - -static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct dib0700_state *st = d->priv; - - if (st->fw_use_new_i2c_api == 1) { - /* User running at least fw 1.20 */ - return dib0700_i2c_xfer_new(adap, msg, num); - } else { - /* Use legacy calls */ - return dib0700_i2c_xfer_legacy(adap, msg, num); - } -} - -static u32 dib0700_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -struct i2c_algorithm dib0700_i2c_algo = { - .master_xfer = dib0700_i2c_xfer, - .functionality = dib0700_i2c_func, -}; - -int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, int *cold) -{ - s16 ret; - u8 *b; - - b = kmalloc(16, GFP_KERNEL); - if (!b) - return -ENOMEM; - - - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT); - - deb_info("FW GET_VERSION length: %d\n",ret); - - *cold = ret <= 0; - deb_info("cold: %d\n", *cold); - - kfree(b); - return 0; -} - -static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll, - u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv, - u16 pll_loopdiv, u16 free_div, u16 dsuScaler) -{ - struct dib0700_state *st = d->priv; - int ret; - - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - return -EINTR; - } - - st->buf[0] = REQUEST_SET_CLOCK; - st->buf[1] = (en_pll << 7) | (pll_src << 6) | - (pll_range << 5) | (clock_gpio3 << 4); - st->buf[2] = (pll_prediv >> 8) & 0xff; /* MSB */ - st->buf[3] = pll_prediv & 0xff; /* LSB */ - st->buf[4] = (pll_loopdiv >> 8) & 0xff; /* MSB */ - st->buf[5] = pll_loopdiv & 0xff; /* LSB */ - st->buf[6] = (free_div >> 8) & 0xff; /* MSB */ - st->buf[7] = free_div & 0xff; /* LSB */ - st->buf[8] = (dsuScaler >> 8) & 0xff; /* MSB */ - st->buf[9] = dsuScaler & 0xff; /* LSB */ - - ret = dib0700_ctrl_wr(d, st->buf, 10); - mutex_unlock(&d->usb_mutex); - - return ret; -} - -int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz) -{ - struct dib0700_state *st = d->priv; - u16 divider; - int ret; - - if (scl_kHz == 0) - return -EINVAL; - - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - return -EINTR; - } - - st->buf[0] = REQUEST_SET_I2C_PARAM; - divider = (u16) (30000 / scl_kHz); - st->buf[1] = 0; - st->buf[2] = (u8) (divider >> 8); - st->buf[3] = (u8) (divider & 0xff); - divider = (u16) (72000 / scl_kHz); - st->buf[4] = (u8) (divider >> 8); - st->buf[5] = (u8) (divider & 0xff); - divider = (u16) (72000 / scl_kHz); /* clock: 72MHz */ - st->buf[6] = (u8) (divider >> 8); - st->buf[7] = (u8) (divider & 0xff); - - deb_info("setting I2C speed: %04x %04x %04x (%d kHz).", - (st->buf[2] << 8) | (st->buf[3]), (st->buf[4] << 8) | - st->buf[5], (st->buf[6] << 8) | st->buf[7], scl_kHz); - - ret = dib0700_ctrl_wr(d, st->buf, 8); - mutex_unlock(&d->usb_mutex); - - return ret; -} - - -int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3) -{ - switch (clk_MHz) { - case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break; - default: return -EINVAL; - } - return 0; -} - -static int dib0700_jumpram(struct usb_device *udev, u32 address) -{ - int ret = 0, actlen; - u8 *buf; - - buf = kmalloc(8, GFP_KERNEL); - if (!buf) - return -ENOMEM; - buf[0] = REQUEST_JUMPRAM; - buf[1] = 0; - buf[2] = 0; - buf[3] = 0; - buf[4] = (address >> 24) & 0xff; - buf[5] = (address >> 16) & 0xff; - buf[6] = (address >> 8) & 0xff; - buf[7] = address & 0xff; - - if ((ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x01),buf,8,&actlen,1000)) < 0) { - deb_fw("jumpram to 0x%x failed\n",address); - goto out; - } - if (actlen != 8) { - deb_fw("jumpram to 0x%x failed\n",address); - ret = -EIO; - goto out; - } -out: - kfree(buf); - return ret; -} - -int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw) -{ - struct hexline hx; - int pos = 0, ret, act_len, i, adap_num; - u8 *buf; - u32 fw_version; - - buf = kmalloc(260, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) { - deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n", - hx.addr, hx.len, hx.chk); - - buf[0] = hx.len; - buf[1] = (hx.addr >> 8) & 0xff; - buf[2] = hx.addr & 0xff; - buf[3] = hx.type; - memcpy(&buf[4],hx.data,hx.len); - buf[4+hx.len] = hx.chk; - - ret = usb_bulk_msg(udev, - usb_sndbulkpipe(udev, 0x01), - buf, - hx.len + 5, - &act_len, - 1000); - - if (ret < 0) { - err("firmware download failed at %d with %d",pos,ret); - goto out; - } - } - - if (ret == 0) { - /* start the firmware */ - if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) { - info("firmware started successfully."); - msleep(500); - } - } else - ret = -EIO; - - /* the number of ts packet has to be at least 1 */ - if (nb_packet_buffer_size < 1) - nb_packet_buffer_size = 1; - - /* get the fimware version */ - usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - REQUEST_GET_VERSION, - USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, - buf, 16, USB_CTRL_GET_TIMEOUT); - fw_version = (buf[8] << 24) | (buf[9] << 16) | (buf[10] << 8) | buf[11]; - - /* set the buffer size - DVB-USB is allocating URB buffers - * only after the firwmare download was successful */ - for (i = 0; i < dib0700_device_count; i++) { - for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters; - adap_num++) { - if (fw_version >= 0x10201) { - dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 188*nb_packet_buffer_size; - } else { - /* for fw version older than 1.20.1, - * the buffersize has to be n times 512 */ - dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512; - if (dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize < 512) - dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 512; - } - } - } -out: - kfree(buf); - return ret; -} - -int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct dib0700_state *st = adap->dev->priv; - int ret; - - if ((onoff != 0) && (st->fw_version >= 0x10201)) { - /* for firmware later than 1.20.1, - * the USB xfer length can be set */ - ret = dib0700_set_usb_xfer_len(adap->dev, - st->nb_packet_buffer_size); - if (ret < 0) { - deb_info("can not set the USB xfer len\n"); - return ret; - } - } - - if (mutex_lock_interruptible(&adap->dev->usb_mutex) < 0) { - err("could not acquire lock"); - return -EINTR; - } - - st->buf[0] = REQUEST_ENABLE_VIDEO; - /* this bit gives a kind of command, - * rather than enabling something or not */ - st->buf[1] = (onoff << 4) | 0x00; - - if (st->disable_streaming_master_mode == 1) - st->buf[2] = 0x00; - else - st->buf[2] = 0x01 << 4; /* Master mode */ - - st->buf[3] = 0x00; - - deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id); - - st->channel_state &= ~0x3; - if ((adap->fe_adap[0].stream.props.endpoint != 2) - && (adap->fe_adap[0].stream.props.endpoint != 3)) { - deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint); - if (onoff) - st->channel_state |= 1 << (adap->id); - else - st->channel_state |= 1 << ~(adap->id); - } else { - if (onoff) - st->channel_state |= 1 << (adap->fe_adap[0].stream.props.endpoint-2); - else - st->channel_state |= 1 << (3-adap->fe_adap[0].stream.props.endpoint); - } - - st->buf[2] |= st->channel_state; - - deb_info("data for streaming: %x %x\n", st->buf[1], st->buf[2]); - - ret = dib0700_ctrl_wr(adap->dev, st->buf, 4); - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type) -{ - struct dvb_usb_device *d = rc->priv; - struct dib0700_state *st = d->priv; - int new_proto, ret; - - if (mutex_lock_interruptible(&d->usb_mutex) < 0) { - err("could not acquire lock"); - return -EINTR; - } - - st->buf[0] = REQUEST_SET_RC; - st->buf[1] = 0; - st->buf[2] = 0; - - /* Set the IR mode */ - if (rc_type == RC_TYPE_RC5) - new_proto = 1; - else if (rc_type == RC_TYPE_NEC) - new_proto = 0; - else if (rc_type == RC_TYPE_RC6) { - if (st->fw_version < 0x10200) { - ret = -EINVAL; - goto out; - } - - new_proto = 2; - } else { - ret = -EINVAL; - goto out; - } - - st->buf[1] = new_proto; - - ret = dib0700_ctrl_wr(d, st->buf, 3); - if (ret < 0) { - err("ir protocol setup failed"); - goto out; - } - - d->props.rc.core.protocol = rc_type; - -out: - mutex_unlock(&d->usb_mutex); - return ret; -} - -/* Number of keypresses to ignore before start repeating */ -#define RC_REPEAT_DELAY_V1_20 10 - -/* This is the structure of the RC response packet starting in firmware 1.20 */ -struct dib0700_rc_response { - u8 report_id; - u8 data_state; - union { - u16 system16; - struct { - u8 not_system; - u8 system; - }; - }; - u8 data; - u8 not_data; -}; -#define RC_MSG_SIZE_V1_20 6 - -static void dib0700_rc_urb_completion(struct urb *purb) -{ - struct dvb_usb_device *d = purb->context; - struct dib0700_rc_response *poll_reply; - u32 uninitialized_var(keycode); - u8 toggle; - - deb_info("%s()\n", __func__); - if (d->rc_dev == NULL) { - /* This will occur if disable_rc_polling=1 */ - kfree(purb->transfer_buffer); - usb_free_urb(purb); - return; - } - - poll_reply = purb->transfer_buffer; - - if (purb->status < 0) { - deb_info("discontinuing polling\n"); - kfree(purb->transfer_buffer); - usb_free_urb(purb); - return; - } - - if (purb->actual_length != RC_MSG_SIZE_V1_20) { - deb_info("malformed rc msg size=%d\n", purb->actual_length); - goto resubmit; - } - - deb_data("IR ID = %02X state = %02X System = %02X %02X Cmd = %02X %02X (len %d)\n", - poll_reply->report_id, poll_reply->data_state, - poll_reply->system, poll_reply->not_system, - poll_reply->data, poll_reply->not_data, - purb->actual_length); - - switch (d->props.rc.core.protocol) { - case RC_TYPE_NEC: - toggle = 0; - - /* NEC protocol sends repeat code as 0 0 0 FF */ - if ((poll_reply->system == 0x00) && (poll_reply->data == 0x00) - && (poll_reply->not_data == 0xff)) { - poll_reply->data_state = 2; - break; - } - - if ((poll_reply->system ^ poll_reply->not_system) != 0xff) { - deb_data("NEC extended protocol\n"); - /* NEC extended code - 24 bits */ - keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data; - } else { - deb_data("NEC normal protocol\n"); - /* normal NEC code - 16 bits */ - keycode = poll_reply->system << 8 | poll_reply->data; - } - - break; - default: - deb_data("RC5 protocol\n"); - /* RC5 Protocol */ - toggle = poll_reply->report_id; - keycode = poll_reply->system << 8 | poll_reply->data; - - break; - } - - if ((poll_reply->data + poll_reply->not_data) != 0xff) { - /* Key failed integrity check */ - err("key failed integrity check: %04x %02x %02x", - poll_reply->system, - poll_reply->data, poll_reply->not_data); - goto resubmit; - } - - rc_keydown(d->rc_dev, keycode, toggle); - -resubmit: - /* Clean the buffer before we requeue */ - memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20); - - /* Requeue URB */ - usb_submit_urb(purb, GFP_ATOMIC); -} - -int dib0700_rc_setup(struct dvb_usb_device *d) -{ - struct dib0700_state *st = d->priv; - struct urb *purb; - int ret; - - /* Poll-based. Don't initialize bulk mode */ - if (st->fw_version < 0x10200) - return 0; - - /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */ - purb = usb_alloc_urb(0, GFP_KERNEL); - if (purb == NULL) { - err("rc usb alloc urb failed"); - return -ENOMEM; - } - - purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL); - if (purb->transfer_buffer == NULL) { - err("rc kzalloc failed"); - usb_free_urb(purb); - return -ENOMEM; - } - - purb->status = -EINPROGRESS; - usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1), - purb->transfer_buffer, RC_MSG_SIZE_V1_20, - dib0700_rc_urb_completion, d); - - ret = usb_submit_urb(purb, GFP_ATOMIC); - if (ret) { - err("rc submit urb failed"); - kfree(purb->transfer_buffer); - usb_free_urb(purb); - } - - return ret; -} - -static int dib0700_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int i; - struct dvb_usb_device *dev; - - for (i = 0; i < dib0700_device_count; i++) - if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, - &dev, adapter_nr) == 0) { - struct dib0700_state *st = dev->priv; - u32 hwversion, romversion, fw_version, fwtype; - - dib0700_get_version(dev, &hwversion, &romversion, - &fw_version, &fwtype); - - deb_info("Firmware version: %x, %d, 0x%x, %d\n", - hwversion, romversion, fw_version, fwtype); - - st->fw_version = fw_version; - st->nb_packet_buffer_size = (u32)nb_packet_buffer_size; - - /* Disable polling mode on newer firmwares */ - if (st->fw_version >= 0x10200) - dev->props.rc.core.bulk_mode = true; - else - dev->props.rc.core.bulk_mode = false; - - dib0700_rc_setup(dev); - - return 0; - } - - return -ENODEV; -} - -static struct usb_driver dib0700_driver = { - .name = "dvb_usb_dib0700", - .probe = dib0700_probe, - .disconnect = dvb_usb_device_exit, - .id_table = dib0700_usb_id_table, -}; - -module_usb_driver(dib0700_driver); - -MODULE_FIRMWARE("dvb-usb-dib0700-1.20.fw"); -MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>"); -MODULE_DESCRIPTION("Driver for devices based on DiBcom DiB0700 - USB bridge"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c deleted file mode 100644 index 510001da6e83..000000000000 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ /dev/null @@ -1,4813 +0,0 @@ -/* Linux driver for devices based on the DiBcom DiB0700 USB bridge - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * Copyright (C) 2005-9 DiBcom, SA et al - */ -#include "dib0700.h" - -#include "dib3000mc.h" -#include "dib7000m.h" -#include "dib7000p.h" -#include "dib8000.h" -#include "dib9000.h" -#include "mt2060.h" -#include "mt2266.h" -#include "tuner-xc2028.h" -#include "xc5000.h" -#include "xc4000.h" -#include "s5h1411.h" -#include "dib0070.h" -#include "dib0090.h" -#include "lgdt3305.h" -#include "mxl5007t.h" - -static int force_lna_activation; -module_param(force_lna_activation, int, 0644); -MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), " - "if applicable for the device (default: 0=automatic/off)."); - -struct dib0700_adapter_state { - int (*set_param_save) (struct dvb_frontend *); - const struct firmware *frontend_firmware; -}; - -/* Hauppauge Nova-T 500 (aka Bristol) - * has a LNA on GPIO0 which is enabled by setting 1 */ -static struct mt2060_config bristol_mt2060_config[2] = { - { - .i2c_address = 0x60, - .clock_out = 3, - }, { - .i2c_address = 0x61, - } -}; - - -static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { - .band_caps = BAND_VHF | BAND_UHF, - .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), - - .agc1_max = 42598, - .agc1_min = 17694, - .agc2_max = 45875, - .agc2_min = 0, - - .agc1_pt1 = 0, - .agc1_pt2 = 59, - - .agc1_slope1 = 0, - .agc1_slope2 = 69, - - .agc2_pt1 = 0, - .agc2_pt2 = 59, - - .agc2_slope1 = 111, - .agc2_slope2 = 28, -}; - -static struct dib3000mc_config bristol_dib3000mc_config[2] = { - { .agc = &bristol_dib3000p_mt2060_agc_config, - .max_time = 0x196, - .ln_adc_level = 0x1cc7, - .output_mpeg2_in_188_bytes = 1, - }, - { .agc = &bristol_dib3000p_mt2060_agc_config, - .max_time = 0x196, - .ln_adc_level = 0x1cc7, - .output_mpeg2_in_188_bytes = 1, - } -}; - -static int bristol_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_state *st = adap->dev->priv; - if (adap->id == 0) { - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); - - if (force_lna_activation) - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - else - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); - - if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) { - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); - return -ENODEV; - } - } - st->mt2060_if1[adap->id] = 1220; - return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, - (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; -} - -static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) -{ - struct i2c_msg msg[2] = { - { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, - { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 }, - }; - if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO; - return 0; -} - -static int bristol_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; - struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1); - s8 a; - int if1=1220; - if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && - adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { - if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; - } - return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, - &bristol_mt2060_config[adap->id], if1) == NULL ? - -ENODEV : 0; -} - -/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */ - -/* MT226x */ -static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = { - { - BAND_UHF, - - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, - * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) - | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), - - 1130, - 21, - - 0, - 118, - - 0, - 3530, - 1, - 0, - - 65535, - 33770, - 65535, - 23592, - - 0, - 62, - 255, - 64, - 64, - 132, - 192, - 80, - 80, - - 17, - 27, - 23, - 51, - - 1, - }, { - BAND_VHF | BAND_LBAND, - - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, - * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) - | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), - - 2372, - 21, - - 0, - 118, - - 0, - 3530, - 1, - 0, - - 65535, - 0, - 65535, - 23592, - - 0, - 128, - 128, - 128, - 0, - 128, - 253, - 81, - 0, - - 17, - 27, - 23, - 51, - - 1, - } -}; - -static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = { - 60000, 30000, - 1, 8, 3, 1, 0, - 0, 0, 1, 1, 2, - (3 << 14) | (1 << 12) | (524 << 0), - 0, - 20452225, -}; - -static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = { - { .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .tuner_is_baseband = 1, - - .agc_config_count = 2, - .agc = stk7700d_7000p_mt2266_agc_config, - .bw = &stk7700d_mt2266_pll_config, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - }, - { .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .tuner_is_baseband = 1, - - .agc_config_count = 2, - .agc = stk7700d_7000p_mt2266_agc_config, - .bw = &stk7700d_mt2266_pll_config, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - } -}; - -static struct mt2266_config stk7700d_mt2266_config[2] = { - { .i2c_address = 0x60 - }, - { .i2c_address = 0x60 - } -}; - -static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (adap->id == 0) { - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(10); - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, - stk7700d_dib7000p_mt2266_config) - != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); - return -ENODEV; - } - } - - adap->fe_adap[0].fe = - dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, - 0x80 + (adap->id << 1), - &stk7700d_dib7000p_mt2266_config[adap->id]); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (adap->id == 0) { - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, - stk7700d_dib7000p_mt2266_config) - != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); - return -ENODEV; - } - } - - adap->fe_adap[0].fe = - dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, - 0x80 + (adap->id << 1), - &stk7700d_dib7000p_mt2266_config[adap->id]); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct i2c_adapter *tun_i2c; - tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); - return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c, - &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0; -} - -/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ -static struct dibx000_agc_config xc3028_agc_config = { - BAND_VHF | BAND_UHF, /* band_caps */ - - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, - * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, - * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | - (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ - - 712, /* inv_gain */ - 21, /* time_stabiliz */ - - 0, /* alpha_level */ - 118, /* thlock */ - - 0, /* wbd_inv */ - 2867, /* wbd_ref */ - 0, /* wbd_sel */ - 2, /* wbd_alpha */ - - 0, /* agc1_max */ - 0, /* agc1_min */ - 39718, /* agc2_max */ - 9930, /* agc2_min */ - 0, /* agc1_pt1 */ - 0, /* agc1_pt2 */ - 0, /* agc1_pt3 */ - 0, /* agc1_slope1 */ - 0, /* agc1_slope2 */ - 0, /* agc2_pt1 */ - 128, /* agc2_pt2 */ - 29, /* agc2_slope1 */ - 29, /* agc2_slope2 */ - - 17, /* alpha_mant */ - 27, /* alpha_exp */ - 23, /* beta_mant */ - 51, /* beta_exp */ - - 1, /* perform_agc_softsplit */ -}; - -/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ -static struct dibx000_bandwidth_config xc3028_bw_config = { - 60000, 30000, /* internal, sampling */ - 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ - 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, - modulo */ - (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ - (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ - 20452225, /* timf */ - 30000000, /* xtal_hz */ -}; - -static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { - .output_mpeg2_in_188_bytes = 1, - .tuner_is_baseband = 1, - - .agc_config_count = 1, - .agc = &xc3028_agc_config, - .bw = &xc3028_bw_config, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, -}; - -static int stk7700ph_xc3028_callback(void *ptr, int component, - int command, int arg) -{ - struct dvb_usb_adapter *adap = ptr; - - switch (command) { - case XC2028_TUNER_RESET: - /* Send the tuner in then out of reset */ - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10); - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - break; - case XC2028_RESET_CLK: - break; - default: - err("%s: unknown command %d, arg %d\n", __func__, - command, arg); - return -EINVAL; - } - return 0; -} - -static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { - .fname = XC2028_DEFAULT_FIRMWARE, - .max_len = 64, - .demod = XC3028_FE_DIBCOM52, -}; - -static struct xc2028_config stk7700ph_xc3028_config = { - .i2c_addr = 0x61, - .ctrl = &stk7700ph_xc3028_ctrl, -}; - -static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; - - if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && - desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); - else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - msleep(10); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, - &stk7700ph_dib7700_xc3028_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", - __func__); - return -ENODEV; - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, - &stk7700ph_dib7700_xc3028_config); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct i2c_adapter *tun_i2c; - - tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, - DIBX000_I2C_INTERFACE_TUNER, 1); - - stk7700ph_xc3028_config.i2c_adap = tun_i2c; - - /* FIXME: generalize & move to common area */ - adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback; - - return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config) - == NULL ? -ENODEV : 0; -} - -#define DEFAULT_RC_INTERVAL 50 - -static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; - -/* Number of keypresses to ignore before start repeating */ -#define RC_REPEAT_DELAY 6 - -/* - * This function is used only when firmware is < 1.20 version. Newer - * firmwares use bulk mode, with functions implemented at dib0700_core, - * at dib0700_rc_urb_completion() - */ -static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) -{ - u8 key[4]; - u32 keycode; - u8 toggle; - int i; - struct dib0700_state *st = d->priv; - - if (st->fw_version >= 0x10200) { - /* For 1.20 firmware , We need to keep the RC polling - callback so we can reuse the input device setup in - dvb-usb-remote.c. However, the actual work is being done - in the bulk URB completion handler. */ - return 0; - } - - i = dib0700_ctrl_rd(d, rc_request, 2, key, 4); - if (i <= 0) { - err("RC Query Failed"); - return -1; - } - - /* losing half of KEY_0 events from Philipps rc5 remotes.. */ - if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0) - return 0; - - /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ - - dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */ - - d->last_event = 0; - switch (d->props.rc.core.protocol) { - case RC_TYPE_NEC: - /* NEC protocol sends repeat code as 0 0 0 FF */ - if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && - (key[3] == 0xff)) - keycode = d->last_event; - else { - keycode = key[3-2] << 8 | key[3-3]; - d->last_event = keycode; - } - - rc_keydown(d->rc_dev, keycode, 0); - break; - default: - /* RC-5 protocol changes toggle bit on new keypress */ - keycode = key[3-2] << 8 | key[3-3]; - toggle = key[3-1]; - rc_keydown(d->rc_dev, keycode, toggle); - - break; - } - return 0; -} - -/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ -static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { - BAND_UHF | BAND_VHF, - - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, - * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) - | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), - - 712, - 41, - - 0, - 118, - - 0, - 4095, - 0, - 0, - - 42598, - 17694, - 45875, - 2621, - 0, - 76, - 139, - 52, - 59, - 107, - 172, - 57, - 70, - - 21, - 25, - 28, - 48, - - 1, - { 0, - 107, - 51800, - 24700 - }, -}; - -static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { - BAND_UHF | BAND_VHF, - - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, - * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) - | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), - - 712, - 41, - - 0, - 118, - - 0, - 4095, - 0, - 0, - - 42598, - 16384, - 42598, - 0, - - 0, - 137, - 255, - - 0, - 255, - - 0, - 0, - - 0, - 41, - - 15, - 25, - - 28, - 48, - - 0, -}; - -static struct dibx000_bandwidth_config stk7700p_pll_config = { - 60000, 30000, - 1, 8, 3, 1, 0, - 0, 0, 1, 1, 0, - (3 << 14) | (1 << 12) | (524 << 0), - 60258167, - 20452225, - 30000000, -}; - -static struct dib7000m_config stk7700p_dib7000m_config = { - .dvbt_mode = 1, - .output_mpeg2_in_188_bytes = 1, - .quartz_direct = 1, - - .agc_config_count = 1, - .agc = &stk7700p_7000m_mt2060_agc_config, - .bw = &stk7700p_pll_config, - - .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, -}; - -static struct dib7000p_config stk7700p_dib7000p_config = { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 1, - .agc = &stk7700p_7000p_mt2060_agc_config, - .bw = &stk7700p_pll_config, - - .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, -}; - -static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_state *st = adap->dev->priv; - /* unless there is no real power management in DVB - we leave the device on GPIO6 */ - - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); - - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); - dib0700_ctrl_clock(adap->dev, 72, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); - - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - st->mt2060_if1[0] = 1220; - - if (dib7000pc_detection(&adap->dev->i2c_adap)) { - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); - st->is_dib7000pc = 1; - } else - adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static struct mt2060_config stk7700p_mt2060_config = { - 0x60 -}; - -static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; - struct dib0700_state *st = adap->dev->priv; - struct i2c_adapter *tun_i2c; - s8 a; - int if1=1220; - if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && - adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { - if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; - } - if (st->is_dib7000pc) - tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); - else - tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); - - return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config, - if1) == NULL ? -ENODEV : 0; -} - -/* DIB7070 generic */ -static struct dibx000_agc_config dib7070_agc_config = { - BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, - * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) - | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), - - 600, - 10, - - 0, - 118, - - 0, - 3530, - 1, - 5, - - 65535, - 0, - - 65535, - 0, - - 0, - 40, - 183, - 206, - 255, - 72, - 152, - 88, - 90, - - 17, - 27, - 23, - 51, - - 0, -}; - -static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) -{ - deb_info("reset: %d", onoff); - return dib7000p_set_gpio(fe, 8, 0, !onoff); -} - -static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) -{ - deb_info("sleep: %d", onoff); - return dib7000p_set_gpio(fe, 9, 0, onoff); -} - -static struct dib0070_config dib7070p_dib0070_config[2] = { - { - .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib7070_tuner_reset, - .sleep = dib7070_tuner_sleep, - .clock_khz = 12000, - .clock_pad_drive = 4, - .charge_pump = 2, - }, { - .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib7070_tuner_reset, - .sleep = dib7070_tuner_sleep, - .clock_khz = 12000, - .charge_pump = 2, - } -}; - -static struct dib0070_config dib7770p_dib0070_config = { - .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib7070_tuner_reset, - .sleep = dib7070_tuner_sleep, - .clock_khz = 12000, - .clock_pad_drive = 0, - .flip_chip = 1, - .charge_pump = 2, -}; - -static int dib7070_set_param_override(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dib0700_adapter_state *state = adap->priv; - - u16 offset; - u8 band = BAND_OF_FREQUENCY(p->frequency/1000); - switch (band) { - case BAND_VHF: offset = 950; break; - case BAND_UHF: - default: offset = 550; break; - } - deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); - dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); - return state->set_param_save(fe); -} - -static int dib7770_set_param_override(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dib0700_adapter_state *state = adap->priv; - - u16 offset; - u8 band = BAND_OF_FREQUENCY(p->frequency/1000); - switch (band) { - case BAND_VHF: - dib7000p_set_gpio(fe, 0, 0, 1); - offset = 850; - break; - case BAND_UHF: - default: - dib7000p_set_gpio(fe, 0, 0, 0); - offset = 250; - break; - } - deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); - dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); - return state->set_param_save(fe); -} - -static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, - DIBX000_I2C_INTERFACE_TUNER, 1); - - if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, - &dib7770p_dib0070_config) == NULL) - return -ENODEV; - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override; - return 0; -} - -static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); - - if (adap->id == 0) { - if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL) - return -ENODEV; - } else { - if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL) - return -ENODEV; - } - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override; - return 0; -} - -static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index, - u16 pid, int onoff) -{ - struct dib0700_state *st = adapter->dev->priv; - if (st->is_dib7000pc) - return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); - return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); -} - -static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) -{ - struct dib0700_state *st = adapter->dev->priv; - if (st->is_dib7000pc) - return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); - return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); -} - -static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) -{ - return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); -} - -static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) -{ - return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); -} - -static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { - 60000, 15000, - 1, 20, 3, 1, 0, - 0, 0, 1, 1, 2, - (3 << 14) | (1 << 12) | (524 << 0), - (0 << 25) | 0, - 20452225, - 12000000, -}; - -static struct dib7000p_config dib7070p_dib7000p_config = { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 1, - .agc = &dib7070_agc_config, - .bw = &dib7070_bw_config_12_mhz, - .tuner_is_baseband = 1, - .spur_protect = 1, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, -}; - -/* STK7070P */ -static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct usb_device_descriptor *p = &adap->dev->udev->descriptor; - if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && - p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); - else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, - &dib7070p_dib7000p_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", - __func__); - return -ENODEV; - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, - &dib7070p_dib7000p_config); - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -/* STK7770P */ -static struct dib7000p_config dib7770p_dib7000p_config = { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 1, - .agc = &dib7070_agc_config, - .bw = &dib7070_bw_config_12_mhz, - .tuner_is_baseband = 1, - .spur_protect = 1, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, - .enable_current_mirror = 1, - .disable_sample_and_hold = 0, -}; - -static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct usb_device_descriptor *p = &adap->dev->udev->descriptor; - if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && - p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); - else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, - &dib7770p_dib7000p_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", - __func__); - return -ENODEV; - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, - &dib7770p_dib7000p_config); - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -/* DIB807x generic */ -static struct dibx000_agc_config dib807x_agc_config[2] = { - { - BAND_VHF, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, - * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, - * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0, - * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, - * P_agc_write=0 */ - (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) | - (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | - (0 << 0), /* setup*/ - - 600, /* inv_gain*/ - 10, /* time_stabiliz*/ - - 0, /* alpha_level*/ - 118, /* thlock*/ - - 0, /* wbd_inv*/ - 3530, /* wbd_ref*/ - 1, /* wbd_sel*/ - 5, /* wbd_alpha*/ - - 65535, /* agc1_max*/ - 0, /* agc1_min*/ - - 65535, /* agc2_max*/ - 0, /* agc2_min*/ - - 0, /* agc1_pt1*/ - 40, /* agc1_pt2*/ - 183, /* agc1_pt3*/ - 206, /* agc1_slope1*/ - 255, /* agc1_slope2*/ - 72, /* agc2_pt1*/ - 152, /* agc2_pt2*/ - 88, /* agc2_slope1*/ - 90, /* agc2_slope2*/ - - 17, /* alpha_mant*/ - 27, /* alpha_exp*/ - 23, /* beta_mant*/ - 51, /* beta_exp*/ - - 0, /* perform_agc_softsplit*/ - }, { - BAND_UHF, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, - * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, - * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, - * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, - * P_agc_write=0 */ - (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) | - (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | - (0 << 0), /* setup */ - - 600, /* inv_gain*/ - 10, /* time_stabiliz*/ - - 0, /* alpha_level*/ - 118, /* thlock*/ - - 0, /* wbd_inv*/ - 3530, /* wbd_ref*/ - 1, /* wbd_sel*/ - 5, /* wbd_alpha*/ - - 65535, /* agc1_max*/ - 0, /* agc1_min*/ - - 65535, /* agc2_max*/ - 0, /* agc2_min*/ - - 0, /* agc1_pt1*/ - 40, /* agc1_pt2*/ - 183, /* agc1_pt3*/ - 206, /* agc1_slope1*/ - 255, /* agc1_slope2*/ - 72, /* agc2_pt1*/ - 152, /* agc2_pt2*/ - 88, /* agc2_slope1*/ - 90, /* agc2_slope2*/ - - 17, /* alpha_mant*/ - 27, /* alpha_exp*/ - 23, /* beta_mant*/ - 51, /* beta_exp*/ - - 0, /* perform_agc_softsplit*/ - } -}; - -static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = { - 60000, 15000, /* internal, sampling*/ - 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/ - 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core, - ADClkSrc, modulo */ - (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/ - (0 << 25) | 0, /* ifreq = 0.000000 MHz*/ - 18179755, /* timf*/ - 12000000, /* xtal_hz*/ -}; - -static struct dib8000_config dib807x_dib8000_config[2] = { - { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 2, - .agc = dib807x_agc_config, - .pll = &dib807x_bw_config_12_mhz, - .tuner_is_baseband = 1, - - .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, - .div_cfg = 1, - .agc_control = &dib0070_ctrl_agc_filter, - .output_mode = OUTMODE_MPEG2_FIFO, - .drives = 0x2d98, - }, { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 2, - .agc = dib807x_agc_config, - .pll = &dib807x_bw_config_12_mhz, - .tuner_is_baseband = 1, - - .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, - .agc_control = &dib0070_ctrl_agc_filter, - .output_mode = OUTMODE_MPEG2_FIFO, - .drives = 0x2d98, - } -}; - -static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff) -{ - return dib8000_set_gpio(fe, 5, 0, !onoff); -} - -static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff) -{ - return dib8000_set_gpio(fe, 0, 0, onoff); -} - -static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = { - { 240, 7}, - { 0xffff, 6}, -}; - -static struct dib0070_config dib807x_dib0070_config[2] = { - { - .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib80xx_tuner_reset, - .sleep = dib80xx_tuner_sleep, - .clock_khz = 12000, - .clock_pad_drive = 4, - .vga_filter = 1, - .force_crystal_mode = 1, - .enable_third_order_filter = 1, - .charge_pump = 0, - .wbd_gain = dib8070_wbd_gain_cfg, - .osc_buffer_state = 0, - .freq_offset_khz_uhf = -100, - .freq_offset_khz_vhf = -100, - }, { - .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, - .reset = dib80xx_tuner_reset, - .sleep = dib80xx_tuner_sleep, - .clock_khz = 12000, - .clock_pad_drive = 2, - .vga_filter = 1, - .force_crystal_mode = 1, - .enable_third_order_filter = 1, - .charge_pump = 0, - .wbd_gain = dib8070_wbd_gain_cfg, - .osc_buffer_state = 0, - .freq_offset_khz_uhf = -25, - .freq_offset_khz_vhf = -25, - } -}; - -static int dib807x_set_param_override(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dib0700_adapter_state *state = adap->priv; - - u16 offset = dib0070_wbd_offset(fe); - u8 band = BAND_OF_FREQUENCY(p->frequency/1000); - switch (band) { - case BAND_VHF: - offset += 750; - break; - case BAND_UHF: /* fall-thru wanted */ - default: - offset += 250; break; - } - deb_info("WBD for DiB8000: %d\n", offset); - dib8000_set_wbd_ref(fe, offset); - - return state->set_param_save(fe); -} - -static int dib807x_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, - DIBX000_I2C_INTERFACE_TUNER, 1); - - if (adap->id == 0) { - if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, - &dib807x_dib0070_config[0]) == NULL) - return -ENODEV; - } else { - if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, - &dib807x_dib0070_config[1]) == NULL) - return -ENODEV; - } - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override; - return 0; -} - -static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index, - u16 pid, int onoff) -{ - return dib8000_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); -} - -static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter, - int onoff) -{ - return dib8000_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); -} - -/* STK807x */ -static int stk807x_frontend_attach(struct dvb_usb_adapter *adap) -{ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, - 0x80, 0); - - adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, - &dib807x_dib8000_config[0]); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -/* STK807xPVR */ -static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) -{ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); - msleep(30); - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(500); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - /* initialize IC 0 */ - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0); - - adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, - &dib807x_dib8000_config[0]); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) -{ - /* initialize IC 1 */ - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0); - - adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, - &dib807x_dib8000_config[1]); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -/* STK8096GP */ -static struct dibx000_agc_config dib8090_agc_config[2] = { - { - BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, - * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, - * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) - | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), - - 787, - 10, - - 0, - 118, - - 0, - 3530, - 1, - 5, - - 65535, - 0, - - 65535, - 0, - - 0, - 32, - 114, - 143, - 144, - 114, - 227, - 116, - 117, - - 28, - 26, - 31, - 51, - - 0, - }, - { - BAND_CBAND, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, - * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, - * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ - (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) - | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), - - 787, - 10, - - 0, - 118, - - 0, - 3530, - 1, - 5, - - 0, - 0, - - 65535, - 0, - - 0, - 32, - 114, - 143, - 144, - 114, - 227, - 116, - 117, - - 28, - 26, - 31, - 51, - - 0, - } -}; - -static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = { - 54000, 13500, - 1, 18, 3, 1, 0, - 0, 0, 1, 1, 2, - (3 << 14) | (1 << 12) | (599 << 0), - (0 << 25) | 0, - 20199727, - 12000000, -}; - -static int dib8090_get_adc_power(struct dvb_frontend *fe) -{ - return dib8000_get_adc_power(fe, 1); -} - -static struct dib8000_config dib809x_dib8000_config[2] = { - { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 2, - .agc = dib8090_agc_config, - .agc_control = dib0090_dcc_freq, - .pll = &dib8090_pll_config_12mhz, - .tuner_is_baseband = 1, - - .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, - .div_cfg = 0x31, - .output_mode = OUTMODE_MPEG2_FIFO, - .drives = 0x2d98, - .diversity_delay = 48, - .refclksel = 3, - }, { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 2, - .agc = dib8090_agc_config, - .agc_control = dib0090_dcc_freq, - .pll = &dib8090_pll_config_12mhz, - .tuner_is_baseband = 1, - - .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, - .div_cfg = 0x31, - .output_mode = OUTMODE_DIVERSITY, - .drives = 0x2d08, - .diversity_delay = 1, - .refclksel = 3, - } -}; - -static struct dib0090_wbd_slope dib8090_wbd_table[] = { - /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */ - { 120, 0, 500, 0, 500, 4 }, /* CBAND */ - { 170, 0, 450, 0, 450, 4 }, /* CBAND */ - { 380, 48, 373, 28, 259, 6 }, /* VHF */ - { 860, 34, 700, 36, 616, 6 }, /* high UHF */ - { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */ -}; - -static struct dib0090_config dib809x_dib0090_config = { - .io.pll_bypass = 1, - .io.pll_range = 1, - .io.pll_prediv = 1, - .io.pll_loopdiv = 20, - .io.adc_clock_ratio = 8, - .io.pll_int_loop_filt = 0, - .io.clock_khz = 12000, - .reset = dib80xx_tuner_reset, - .sleep = dib80xx_tuner_sleep, - .clkouttobamse = 1, - .analog_output = 1, - .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS, - .use_pwm_agc = 1, - .clkoutdrive = 1, - .get_adc_power = dib8090_get_adc_power, - .freq_offset_khz_uhf = -63, - .freq_offset_khz_vhf = -143, - .wbd = dib8090_wbd_table, - .fref_clock_ratio = 6, -}; - -static int dib8096_set_param_override(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dib0700_adapter_state *state = adap->priv; - u8 band = BAND_OF_FREQUENCY(p->frequency/1000); - u16 target; - int ret = 0; - enum frontend_tune_state tune_state = CT_SHUTDOWN; - u16 ltgain, rf_gain_limit; - - ret = state->set_param_save(fe); - if (ret < 0) - return ret; - - target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2; - dib8000_set_wbd_ref(fe, target); - - - if (band == BAND_CBAND) { - deb_info("tuning in CBAND - soft-AGC startup\n"); - dib0090_set_tune_state(fe, CT_AGC_START); - do { - ret = dib0090_gain_control(fe); - msleep(ret); - tune_state = dib0090_get_tune_state(fe); - if (tune_state == CT_AGC_STEP_0) - dib8000_set_gpio(fe, 6, 0, 1); - else if (tune_state == CT_AGC_STEP_1) { - dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain); - if (rf_gain_limit == 0) - dib8000_set_gpio(fe, 6, 0, 0); - } - } while (tune_state < CT_AGC_STOP); - dib0090_pwm_gain_reset(fe); - dib8000_pwm_agc_reset(fe); - dib8000_set_tune_state(fe, CT_DEMOD_START); - } else { - deb_info("not tuning in CBAND - standard AGC startup\n"); - dib0090_pwm_gain_reset(fe); - } - - return 0; -} - -static int dib809x_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); - - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL) - return -ENODEV; - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; - return 0; -} - -static int stk809x_frontend_attach(struct dvb_usb_adapter *adap) -{ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(10); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0); - - adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c; - struct dvb_frontend *fe_slave = dib8000_get_slave_frontend(adap->fe_adap[0].fe, 1); - - if (fe_slave) { - tun_i2c = dib8000_get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1); - if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL) - return -ENODEV; - fe_slave->dvb = adap->fe_adap[0].fe->dvb; - fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override; - } - tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL) - return -ENODEV; - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; - - return 0; -} - -static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_frontend *fe_slave; - - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(1000); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(20); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0); - - adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); - if (adap->fe_adap[0].fe == NULL) - return -ENODEV; - - fe_slave = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]); - dib8000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave); - - return fe_slave == NULL ? -ENODEV : 0; -} - -/* TFE8096P */ -static struct dibx000_agc_config dib8096p_agc_config[2] = { - { - .band_caps = BAND_UHF, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, - P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, - P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, - P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, - P_agc_write=0 */ - .setup = (0 << 15) | (0 << 14) | (5 << 11) - | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) - | (0 << 4) | (5 << 1) | (0 << 0), - - .inv_gain = 684, - .time_stabiliz = 10, - - .alpha_level = 0, - .thlock = 118, - - .wbd_inv = 0, - .wbd_ref = 1200, - .wbd_sel = 3, - .wbd_alpha = 5, - - .agc1_max = 65535, - .agc1_min = 0, - - .agc2_max = 32767, - .agc2_min = 0, - - .agc1_pt1 = 0, - .agc1_pt2 = 0, - .agc1_pt3 = 105, - .agc1_slope1 = 0, - .agc1_slope2 = 156, - .agc2_pt1 = 105, - .agc2_pt2 = 255, - .agc2_slope1 = 54, - .agc2_slope2 = 0, - - .alpha_mant = 28, - .alpha_exp = 26, - .beta_mant = 31, - .beta_exp = 51, - - .perform_agc_softsplit = 0, - } , { - .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, - P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, - P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, - P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, - P_agc_write=0 */ - .setup = (0 << 15) | (0 << 14) | (5 << 11) - | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) - | (0 << 4) | (5 << 1) | (0 << 0), - - .inv_gain = 732, - .time_stabiliz = 10, - - .alpha_level = 0, - .thlock = 118, - - .wbd_inv = 0, - .wbd_ref = 1200, - .wbd_sel = 3, - .wbd_alpha = 5, - - .agc1_max = 65535, - .agc1_min = 0, - - .agc2_max = 32767, - .agc2_min = 0, - - .agc1_pt1 = 0, - .agc1_pt2 = 0, - .agc1_pt3 = 98, - .agc1_slope1 = 0, - .agc1_slope2 = 167, - .agc2_pt1 = 98, - .agc2_pt2 = 255, - .agc2_slope1 = 52, - .agc2_slope2 = 0, - - .alpha_mant = 28, - .alpha_exp = 26, - .beta_mant = 31, - .beta_exp = 51, - - .perform_agc_softsplit = 0, - } -}; - -static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = { - 108000, 13500, - 1, 9, 1, 0, 0, - 0, 0, 0, 0, 2, - (3 << 14) | (1 << 12) | (524 << 0), - (0 << 25) | 0, - 20199729, - 12000000, -}; - -static struct dib8000_config tfe8096p_dib8000_config = { - .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .update_lna = NULL, - - .agc_config_count = 2, - .agc = dib8096p_agc_config, - .pll = &dib8096p_clock_config_12_mhz, - - .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, - - .agc_control = NULL, - .diversity_delay = 48, - .output_mode = OUTMODE_MPEG2_FIFO, - .enMpegOutput = 1, -}; - -static struct dib0090_wbd_slope dib8096p_wbd_table[] = { - { 380, 81, 850, 64, 540, 4}, - { 860, 51, 866, 21, 375, 4}, - {1700, 0, 250, 0, 100, 6}, - {2600, 0, 250, 0, 100, 6}, - { 0xFFFF, 0, 0, 0, 0, 0}, -}; - -static const struct dib0090_config tfe8096p_dib0090_config = { - .io.clock_khz = 12000, - .io.pll_bypass = 0, - .io.pll_range = 0, - .io.pll_prediv = 3, - .io.pll_loopdiv = 6, - .io.adc_clock_ratio = 0, - .io.pll_int_loop_filt = 0, - .reset = dib8096p_tuner_sleep, - .sleep = dib8096p_tuner_sleep, - - .freq_offset_khz_uhf = -143, - .freq_offset_khz_vhf = -143, - - .get_adc_power = dib8090_get_adc_power, - - .clkouttobamse = 1, - .analog_output = 0, - - .wbd_vhf_offset = 0, - .wbd_cband_offset = 0, - .use_pwm_agc = 1, - .clkoutdrive = 0, - - .fref_clock_ratio = 1, - - .wbd = dib8096p_wbd_table, - - .ls_cfg_pad_drv = 0, - .data_tx_drv = 0, - .low_if = NULL, - .in_soc = 1, - .force_cband_input = 0, -}; - -struct dibx090p_adc { - u32 freq; /* RF freq MHz */ - u32 timf; /* New Timf */ - u32 pll_loopdiv; /* New prediv */ - u32 pll_prediv; /* New loopdiv */ -}; - -struct dibx090p_adc dib8090p_adc_tab[] = { - { 50000, 17043521, 16, 3}, /* 64 MHz */ - {878000, 20199729, 9, 1}, /* 60 MHz */ - {0xffffffff, 0, 0, 0}, /* 60 MHz */ -}; - -static int dib8096p_agc_startup(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dib0700_adapter_state *state = adap->priv; - struct dibx000_bandwidth_config pll; - u16 target; - int better_sampling_freq = 0, ret; - struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0]; - - ret = state->set_param_save(fe); - if (ret < 0) - return ret; - memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); - - dib0090_pwm_gain_reset(fe); - /* dib0090_get_wbd_target is returning any possible - temperature compensated wbd-target */ - target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; - dib8000_set_wbd_ref(fe, target); - - - while (p->frequency / 1000 > adc_table->freq) { - better_sampling_freq = 1; - adc_table++; - } - - if ((adc_table->freq != 0xffffffff) && better_sampling_freq) { - pll.pll_ratio = adc_table->pll_loopdiv; - pll.pll_prediv = adc_table->pll_prediv; - dib8000_update_pll(fe, &pll); - dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc_table->timf); - } - return 0; -} - -static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap) -{ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(20); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1); - - adap->fe_adap[0].fe = dvb_attach(dib8000_attach, - &adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib8096p_get_i2c_tuner(adap->fe_adap[0].fe); - - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, - &tfe8096p_dib0090_config) == NULL) - return -ENODEV; - - dib8000_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup; - return 0; -} - -/* STK9090M */ -static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) -{ - return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); -} - -static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) -{ - return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); -} - -static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff) -{ - return dib9000_set_gpio(fe, 5, 0, !onoff); -} - -static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff) -{ - return dib9000_set_gpio(fe, 0, 0, onoff); -} - -static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len) -{ - u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 }; - u8 rb[2]; - struct i2c_msg msg[2] = { - {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2}, - {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2}, - }; - u8 index_data; - - dibx000_i2c_set_speed(i2c, 250); - - if (i2c_transfer(i2c, msg, 2) != 2) - return -EIO; - - switch (rb[0] << 8 | rb[1]) { - case 0: - deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n"); - return -EIO; - case 1: - deb_info("Found DiB0170 rev2"); - break; - case 2: - deb_info("Found DiB0190 rev2"); - break; - default: - deb_info("DiB01x0 not found"); - return -EIO; - } - - for (index_data = 0; index_data < len; index_data += 2) { - wb[2] = (data[index_data + 1] >> 8) & 0xff; - wb[3] = (data[index_data + 1]) & 0xff; - - if (data[index_data] == 0) { - wb[0] = (data[index_data] >> 8) & 0xff; - wb[1] = (data[index_data]) & 0xff; - msg[0].len = 2; - if (i2c_transfer(i2c, msg, 2) != 2) - return -EIO; - wb[2] |= rb[0]; - wb[3] |= rb[1] & ~(3 << 4); - } - - wb[0] = (data[index_data] >> 8)&0xff; - wb[1] = (data[index_data])&0xff; - msg[0].len = 4; - if (i2c_transfer(i2c, &msg[0], 1) != 1) - return -EIO; - } - return 0; -} - -static struct dib9000_config stk9090m_config = { - .output_mpeg2_in_188_bytes = 1, - .output_mode = OUTMODE_MPEG2_FIFO, - .vcxo_timer = 279620, - .timing_frequency = 20452225, - .demod_clock_khz = 60000, - .xtal_clock_khz = 30000, - .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), - .subband = { - 2, - { - { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */ - { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */ - { 0 }, - }, - }, - .gpio_function = { - { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, - { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, - }, -}; - -static struct dib9000_config nim9090md_config[2] = { - { - .output_mpeg2_in_188_bytes = 1, - .output_mode = OUTMODE_MPEG2_FIFO, - .vcxo_timer = 279620, - .timing_frequency = 20452225, - .demod_clock_khz = 60000, - .xtal_clock_khz = 30000, - .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), - }, { - .output_mpeg2_in_188_bytes = 1, - .output_mode = OUTMODE_DIVERSITY, - .vcxo_timer = 279620, - .timing_frequency = 20452225, - .demod_clock_khz = 60000, - .xtal_clock_khz = 30000, - .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), - .subband = { - 2, - { - { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */ - { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */ - { 0 }, - }, - }, - .gpio_function = { - { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, - { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, - }, - } -}; - -static struct dib0090_config dib9090_dib0090_config = { - .io.pll_bypass = 0, - .io.pll_range = 1, - .io.pll_prediv = 1, - .io.pll_loopdiv = 8, - .io.adc_clock_ratio = 8, - .io.pll_int_loop_filt = 0, - .io.clock_khz = 30000, - .reset = dib90x0_tuner_reset, - .sleep = dib90x0_tuner_sleep, - .clkouttobamse = 0, - .analog_output = 0, - .use_pwm_agc = 0, - .clkoutdrive = 0, - .freq_offset_khz_uhf = 0, - .freq_offset_khz_vhf = 0, -}; - -static struct dib0090_config nim9090md_dib0090_config[2] = { - { - .io.pll_bypass = 0, - .io.pll_range = 1, - .io.pll_prediv = 1, - .io.pll_loopdiv = 8, - .io.adc_clock_ratio = 8, - .io.pll_int_loop_filt = 0, - .io.clock_khz = 30000, - .reset = dib90x0_tuner_reset, - .sleep = dib90x0_tuner_sleep, - .clkouttobamse = 1, - .analog_output = 0, - .use_pwm_agc = 0, - .clkoutdrive = 0, - .freq_offset_khz_uhf = 0, - .freq_offset_khz_vhf = 0, - }, { - .io.pll_bypass = 0, - .io.pll_range = 1, - .io.pll_prediv = 1, - .io.pll_loopdiv = 8, - .io.adc_clock_ratio = 8, - .io.pll_int_loop_filt = 0, - .io.clock_khz = 30000, - .reset = dib90x0_tuner_reset, - .sleep = dib90x0_tuner_sleep, - .clkouttobamse = 0, - .analog_output = 0, - .use_pwm_agc = 0, - .clkoutdrive = 0, - .freq_offset_khz_uhf = 0, - .freq_offset_khz_vhf = 0, - } -}; - - -static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *state = adap->priv; - struct dib0700_state *st = adap->dev->priv; - u32 fw_version; - - /* Make use of the new i2c functions from FW 1.20 */ - dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); - if (fw_version >= 0x10200) - st->fw_use_new_i2c_api = 1; - dib0700_set_i2c_speed(adap->dev, 340); - - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(20); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80); - - if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { - deb_info("%s: Upload failed. (file not found?)\n", __func__); - return -ENODEV; - } else { - deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size); - } - stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size; - stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data; - - adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int dib9090_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *state = adap->priv; - struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); - u16 data_dib190[10] = { - 1, 0x1374, - 2, 0x01a2, - 7, 0x0020, - 0, 0x00ef, - 8, 0x0486, - }; - - if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL) - return -ENODEV; - i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); - if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0) - return -ENODEV; - dib0700_set_i2c_speed(adap->dev, 1500); - if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) - return -ENODEV; - release_firmware(state->frontend_firmware); - return 0; -} - -static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *state = adap->priv; - struct dib0700_state *st = adap->dev->priv; - struct i2c_adapter *i2c; - struct dvb_frontend *fe_slave; - u32 fw_version; - - /* Make use of the new i2c functions from FW 1.20 */ - dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); - if (fw_version >= 0x10200) - st->fw_use_new_i2c_api = 1; - dib0700_set_i2c_speed(adap->dev, 340); - - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(20); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { - deb_info("%s: Upload failed. (file not found?)\n", __func__); - return -EIO; - } else { - deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size); - } - nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size; - nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data; - nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size; - nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data; - - dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80); - adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]); - - if (adap->fe_adap[0].fe == NULL) - return -ENODEV; - - i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0); - dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82); - - fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]); - dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave); - - return fe_slave == NULL ? -ENODEV : 0; -} - -static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *state = adap->priv; - struct i2c_adapter *i2c; - struct dvb_frontend *fe_slave; - u16 data_dib190[10] = { - 1, 0x5374, - 2, 0x01ae, - 7, 0x0020, - 0, 0x00ef, - 8, 0x0406, - }; - i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); - if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL) - return -ENODEV; - i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); - if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0) - return -ENODEV; - - dib0700_set_i2c_speed(adap->dev, 1500); - if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) - return -ENODEV; - - fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1); - if (fe_slave != NULL) { - i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe); - dib9000_set_i2c_adapter(fe_slave, i2c); - - i2c = dib9000_get_tuner_interface(fe_slave); - if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL) - return -ENODEV; - fe_slave->dvb = adap->fe_adap[0].fe->dvb; - dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500); - if (dib9000_firmware_post_pll_init(fe_slave) < 0) - return -ENODEV; - } - release_firmware(state->frontend_firmware); - - return 0; -} - -/* NIM7090 */ -struct dib7090p_best_adc { - u32 timf; - u32 pll_loopdiv; - u32 pll_prediv; -}; - -static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dib7090p_best_adc *adc) -{ - u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1; - - u16 xtal = 12000; - u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */ - u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */ - u32 fdem_max = 76000; - u32 fdem_min = 69500; - u32 fcp = 0, fs = 0, fdem = 0; - u32 harmonic_id = 0; - - adc->pll_loopdiv = loopdiv; - adc->pll_prediv = prediv; - adc->timf = 0; - - deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min); - - /* Find Min and Max prediv */ - while ((xtal/max_prediv) >= fcp_min) - max_prediv++; - - max_prediv--; - min_prediv = max_prediv; - while ((xtal/min_prediv) <= fcp_max) { - min_prediv--; - if (min_prediv == 1) - break; - } - deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv); - - min_prediv = 2; - - for (prediv = min_prediv ; prediv < max_prediv; prediv++) { - fcp = xtal / prediv; - if (fcp > fcp_min && fcp < fcp_max) { - for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) { - fdem = ((xtal/prediv) * loopdiv); - fs = fdem / 4; - /* test min/max system restrictions */ - - if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) { - spur = 0; - /* test fs harmonics positions */ - for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) { - if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) { - spur = 1; - break; - } - } - - if (!spur) { - adc->pll_loopdiv = loopdiv; - adc->pll_prediv = prediv; - adc->timf = 2396745143UL/fdem*(1 << 9); - adc->timf += ((2396745143UL%fdem) << 9)/fdem; - deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf); - break; - } - } - } - } - if (!spur) - break; - } - - - if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0) - return -EINVAL; - else - return 0; -} - -static int dib7090_agc_startup(struct dvb_frontend *fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dib0700_adapter_state *state = adap->priv; - struct dibx000_bandwidth_config pll; - u16 target; - struct dib7090p_best_adc adc; - int ret; - - ret = state->set_param_save(fe); - if (ret < 0) - return ret; - - memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); - dib0090_pwm_gain_reset(fe); - target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; - dib7000p_set_wbd_ref(fe, target); - - if (dib7090p_get_best_sampling(fe, &adc) == 0) { - pll.pll_ratio = adc.pll_loopdiv; - pll.pll_prediv = adc.pll_prediv; - - dib7000p_update_pll(fe, &pll); - dib7000p_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf); - } - return 0; -} - -static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart) -{ - deb_info("AGC restart callback: %d", restart); - if (restart == 0) /* before AGC startup */ - dib0090_set_dc_servo(fe, 1); - return 0; -} - -static int dib7090e_update_lna(struct dvb_frontend *fe, u16 agc_global) -{ - u16 agc1 = 0, agc2, wbd = 0, wbd_target, wbd_offset, threshold_agc1; - s16 wbd_delta; - - if ((fe->dtv_property_cache.frequency) < 400000000) - threshold_agc1 = 25000; - else - threshold_agc1 = 30000; - - wbd_target = (dib0090_get_wbd_target(fe)*8+1)/2; - wbd_offset = dib0090_get_wbd_offset(fe); - dib7000p_get_agc_values(fe, NULL, &agc1, &agc2, &wbd); - wbd_delta = (s16)wbd - (((s16)wbd_offset+10)*4) ; - - deb_info("update lna, agc_global=%d agc1=%d agc2=%d", - agc_global, agc1, agc2); - deb_info("update lna, wbd=%d wbd target=%d wbd offset=%d wbd delta=%d", - wbd, wbd_target, wbd_offset, wbd_delta); - - if ((agc1 < threshold_agc1) && (wbd_delta > 0)) { - dib0090_set_switch(fe, 1, 1, 1); - dib0090_set_vga(fe, 0); - dib0090_update_rframp_7090(fe, 0); - dib0090_update_tuning_table_7090(fe, 0); - } else { - dib0090_set_vga(fe, 1); - dib0090_update_rframp_7090(fe, 1); - dib0090_update_tuning_table_7090(fe, 1); - dib0090_set_switch(fe, 0, 0, 0); - } - - return 0; -} - -static struct dib0090_wbd_slope dib7090_wbd_table[] = { - { 380, 81, 850, 64, 540, 4}, - { 860, 51, 866, 21, 375, 4}, - {1700, 0, 250, 0, 100, 6}, - {2600, 0, 250, 0, 100, 6}, - { 0xFFFF, 0, 0, 0, 0, 0}, -}; - -static struct dib0090_wbd_slope dib7090e_wbd_table[] = { - { 380, 81, 850, 64, 540, 4}, - { 700, 51, 866, 21, 320, 4}, - { 860, 48, 666, 18, 330, 6}, - {1700, 0, 250, 0, 100, 6}, - {2600, 0, 250, 0, 100, 6}, - { 0xFFFF, 0, 0, 0, 0, 0}, -}; - -static struct dibx000_agc_config dib7090_agc_config[2] = { - { - .band_caps = BAND_UHF, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, - * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ - .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), - - .inv_gain = 687, - .time_stabiliz = 10, - - .alpha_level = 0, - .thlock = 118, - - .wbd_inv = 0, - .wbd_ref = 1200, - .wbd_sel = 3, - .wbd_alpha = 5, - - .agc1_max = 65535, - .agc1_min = 0, - - .agc2_max = 65535, - .agc2_min = 0, - - .agc1_pt1 = 0, - .agc1_pt2 = 32, - .agc1_pt3 = 114, - .agc1_slope1 = 143, - .agc1_slope2 = 144, - .agc2_pt1 = 114, - .agc2_pt2 = 227, - .agc2_slope1 = 116, - .agc2_slope2 = 117, - - .alpha_mant = 18, - .alpha_exp = 0, - .beta_mant = 20, - .beta_exp = 59, - - .perform_agc_softsplit = 0, - } , { - .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, - /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, - * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ - .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), - - .inv_gain = 732, - .time_stabiliz = 10, - - .alpha_level = 0, - .thlock = 118, - - .wbd_inv = 0, - .wbd_ref = 1200, - .wbd_sel = 3, - .wbd_alpha = 5, - - .agc1_max = 65535, - .agc1_min = 0, - - .agc2_max = 65535, - .agc2_min = 0, - - .agc1_pt1 = 0, - .agc1_pt2 = 0, - .agc1_pt3 = 98, - .agc1_slope1 = 0, - .agc1_slope2 = 167, - .agc2_pt1 = 98, - .agc2_pt2 = 255, - .agc2_slope1 = 104, - .agc2_slope2 = 0, - - .alpha_mant = 18, - .alpha_exp = 0, - .beta_mant = 20, - .beta_exp = 59, - - .perform_agc_softsplit = 0, - } -}; - -static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = { - 60000, 15000, - 1, 5, 0, 0, 0, - 0, 0, 1, 1, 2, - (3 << 14) | (1 << 12) | (524 << 0), - (0 << 25) | 0, - 20452225, - 15000000, -}; - -static struct dib7000p_config nim7090_dib7000p_config = { - .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .tuner_is_baseband = 1, - .update_lna = NULL, - - .agc_config_count = 2, - .agc = dib7090_agc_config, - - .bw = &dib7090_clock_config_12_mhz, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .pwm_freq_div = 0, - - .agc_control = dib7090_agc_restart, - - .spur_protect = 0, - .disable_sample_and_hold = 0, - .enable_current_mirror = 0, - .diversity_delay = 0, - - .output_mode = OUTMODE_MPEG2_FIFO, - .enMpegOutput = 1, -}; - -static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = { - { - .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .tuner_is_baseband = 1, - .update_lna = NULL, - - .agc_config_count = 2, - .agc = dib7090_agc_config, - - .bw = &dib7090_clock_config_12_mhz, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .pwm_freq_div = 0, - - .agc_control = dib7090_agc_restart, - - .spur_protect = 0, - .disable_sample_and_hold = 0, - .enable_current_mirror = 0, - .diversity_delay = 0, - - .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, - .default_i2c_addr = 0x90, - .enMpegOutput = 1, - }, { - .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .tuner_is_baseband = 1, - .update_lna = NULL, - - .agc_config_count = 2, - .agc = dib7090_agc_config, - - .bw = &dib7090_clock_config_12_mhz, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .pwm_freq_div = 0, - - .agc_control = dib7090_agc_restart, - - .spur_protect = 0, - .disable_sample_and_hold = 0, - .enable_current_mirror = 0, - .diversity_delay = 0, - - .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, - .default_i2c_addr = 0x92, - .enMpegOutput = 0, - } -}; - -static struct dib7000p_config tfe7090e_dib7000p_config = { - .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .tuner_is_baseband = 1, - .update_lna = dib7090e_update_lna, - - .agc_config_count = 2, - .agc = dib7090_agc_config, - - .bw = &dib7090_clock_config_12_mhz, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .pwm_freq_div = 0, - - .agc_control = dib7090_agc_restart, - - .spur_protect = 0, - .disable_sample_and_hold = 0, - .enable_current_mirror = 0, - .diversity_delay = 0, - - .output_mode = OUTMODE_MPEG2_FIFO, - .enMpegOutput = 1, -}; - -static const struct dib0090_config nim7090_dib0090_config = { - .io.clock_khz = 12000, - .io.pll_bypass = 0, - .io.pll_range = 0, - .io.pll_prediv = 3, - .io.pll_loopdiv = 6, - .io.adc_clock_ratio = 0, - .io.pll_int_loop_filt = 0, - .reset = dib7090_tuner_sleep, - .sleep = dib7090_tuner_sleep, - - .freq_offset_khz_uhf = 0, - .freq_offset_khz_vhf = 0, - - .get_adc_power = dib7090_get_adc_power, - - .clkouttobamse = 1, - .analog_output = 0, - - .wbd_vhf_offset = 0, - .wbd_cband_offset = 0, - .use_pwm_agc = 1, - .clkoutdrive = 0, - - .fref_clock_ratio = 0, - - .wbd = dib7090_wbd_table, - - .ls_cfg_pad_drv = 0, - .data_tx_drv = 0, - .low_if = NULL, - .in_soc = 1, -}; - -static const struct dib0090_config tfe7090e_dib0090_config = { - .io.clock_khz = 12000, - .io.pll_bypass = 0, - .io.pll_range = 0, - .io.pll_prediv = 3, - .io.pll_loopdiv = 6, - .io.adc_clock_ratio = 0, - .io.pll_int_loop_filt = 0, - .reset = dib7090_tuner_sleep, - .sleep = dib7090_tuner_sleep, - - .freq_offset_khz_uhf = 0, - .freq_offset_khz_vhf = 0, - - .get_adc_power = dib7090_get_adc_power, - - .clkouttobamse = 1, - .analog_output = 0, - - .wbd_vhf_offset = 0, - .wbd_cband_offset = 0, - .use_pwm_agc = 1, - .clkoutdrive = 0, - - .fref_clock_ratio = 0, - - .wbd = dib7090e_wbd_table, - - .ls_cfg_pad_drv = 0, - .data_tx_drv = 0, - .low_if = NULL, - .in_soc = 1, - .force_cband_input = 1, - .is_dib7090e = 1, -}; - -static struct dib7000p_config tfe7790e_dib7000p_config = { - .output_mpeg2_in_188_bytes = 1, - .hostbus_diversity = 1, - .tuner_is_baseband = 1, - .update_lna = dib7090e_update_lna, - - .agc_config_count = 2, - .agc = dib7090_agc_config, - - .bw = &dib7090_clock_config_12_mhz, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .pwm_freq_div = 0, - - .agc_control = dib7090_agc_restart, - - .spur_protect = 0, - .disable_sample_and_hold = 0, - .enable_current_mirror = 0, - .diversity_delay = 0, - - .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, - .enMpegOutput = 1, -}; - -static const struct dib0090_config tfe7790e_dib0090_config = { - .io.clock_khz = 12000, - .io.pll_bypass = 0, - .io.pll_range = 0, - .io.pll_prediv = 3, - .io.pll_loopdiv = 6, - .io.adc_clock_ratio = 0, - .io.pll_int_loop_filt = 0, - .reset = dib7090_tuner_sleep, - .sleep = dib7090_tuner_sleep, - - .freq_offset_khz_uhf = 0, - .freq_offset_khz_vhf = 0, - - .get_adc_power = dib7090_get_adc_power, - - .clkouttobamse = 1, - .analog_output = 0, - - .wbd_vhf_offset = 0, - .wbd_cband_offset = 0, - .use_pwm_agc = 1, - .clkoutdrive = 0, - - .fref_clock_ratio = 0, - - .wbd = dib7090e_wbd_table, - - .ls_cfg_pad_drv = 0, - .data_tx_drv = 0, - .low_if = NULL, - .in_soc = 1, - .force_cband_input = 1, - .is_dib7090e = 1, - .force_crystal_mode = 1, -}; - -static const struct dib0090_config tfe7090pvr_dib0090_config[2] = { - { - .io.clock_khz = 12000, - .io.pll_bypass = 0, - .io.pll_range = 0, - .io.pll_prediv = 3, - .io.pll_loopdiv = 6, - .io.adc_clock_ratio = 0, - .io.pll_int_loop_filt = 0, - .reset = dib7090_tuner_sleep, - .sleep = dib7090_tuner_sleep, - - .freq_offset_khz_uhf = 50, - .freq_offset_khz_vhf = 70, - - .get_adc_power = dib7090_get_adc_power, - - .clkouttobamse = 1, - .analog_output = 0, - - .wbd_vhf_offset = 0, - .wbd_cband_offset = 0, - .use_pwm_agc = 1, - .clkoutdrive = 0, - - .fref_clock_ratio = 0, - - .wbd = dib7090_wbd_table, - - .ls_cfg_pad_drv = 0, - .data_tx_drv = 0, - .low_if = NULL, - .in_soc = 1, - }, { - .io.clock_khz = 12000, - .io.pll_bypass = 0, - .io.pll_range = 0, - .io.pll_prediv = 3, - .io.pll_loopdiv = 6, - .io.adc_clock_ratio = 0, - .io.pll_int_loop_filt = 0, - .reset = dib7090_tuner_sleep, - .sleep = dib7090_tuner_sleep, - - .freq_offset_khz_uhf = -50, - .freq_offset_khz_vhf = -70, - - .get_adc_power = dib7090_get_adc_power, - - .clkouttobamse = 1, - .analog_output = 0, - - .wbd_vhf_offset = 0, - .wbd_cband_offset = 0, - .use_pwm_agc = 1, - .clkoutdrive = 0, - - .fref_clock_ratio = 0, - - .wbd = dib7090_wbd_table, - - .ls_cfg_pad_drv = 0, - .data_tx_drv = 0, - .low_if = NULL, - .in_soc = 1, - } -}; - -static int nim7090_frontend_attach(struct dvb_usb_adapter *adap) -{ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - msleep(20); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); - return -ENODEV; - } - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int nim7090_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); - - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL) - return -ENODEV; - - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; - return 0; -} - -static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_state *st = adap->dev->priv; - - /* The TFE7090 requires the dib0700 to not be in master mode */ - st->disable_streaming_master_mode = 1; - - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - msleep(20); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - /* initialize IC 0 */ - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); - return -ENODEV; - } - - dib0700_set_i2c_speed(adap->dev, 340); - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]); - if (adap->fe_adap[0].fe == NULL) - return -ENODEV; - - dib7090_slave_reset(adap->fe_adap[0].fe); - - return 0; -} - -static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap) -{ - struct i2c_adapter *i2c; - - if (adap->dev->adapter[0].fe_adap[0].fe == NULL) { - err("the master dib7090 has to be initialized first"); - return -ENODEV; /* the master device has not been initialized */ - } - - i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); - if (dib7000p_i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); - return -ENODEV; - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]); - dib0700_set_i2c_speed(adap->dev, 200); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); - - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL) - return -ENODEV; - - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; - return 0; -} - -static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); - - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL) - return -ENODEV; - - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; - return 0; -} - -static int tfe7090e_frontend_attach(struct dvb_usb_adapter *adap) -{ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - - msleep(20); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, - 1, 0x10, &tfe7090e_dib7000p_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", - __func__); - return -ENODEV; - } - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, - 0x80, &tfe7090e_dib7000p_config); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int tfe7790e_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_state *st = adap->dev->priv; - - /* The TFE7790E requires the dib0700 to not be in master mode */ - st->disable_streaming_master_mode = 1; - - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - msleep(20); - dib0700_ctrl_clock(adap->dev, 72, 1); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(20); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, - 1, 0x10, &tfe7790e_dib7000p_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", - __func__); - return -ENODEV; - } - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, - 0x80, &tfe7790e_dib7000p_config); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int tfe7790e_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = - dib7090_get_i2c_tuner(adap->fe_adap[0].fe); - - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, - &tfe7790e_dib0090_config) == NULL) - return -ENODEV; - - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; - return 0; -} - -static int tfe7090e_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_adapter_state *st = adap->priv; - struct i2c_adapter *tun_i2c = - dib7090_get_i2c_tuner(adap->fe_adap[0].fe); - - if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, - &tfe7090e_dib0090_config) == NULL) - return -ENODEV; - - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - - st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; - adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; - return 0; -} - -/* STK7070PD */ -static struct dib7000p_config stk7070pd_dib7000p_config[2] = { - { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 1, - .agc = &dib7070_agc_config, - .bw = &dib7070_bw_config_12_mhz, - .tuner_is_baseband = 1, - .spur_protect = 1, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, - }, { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 1, - .agc = &dib7070_agc_config, - .bw = &dib7070_bw_config_12_mhz, - .tuner_is_baseband = 1, - .spur_protect = 1, - - .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, - - .hostbus_diversity = 1, - } -}; - -static void stk7070pd_init(struct dvb_usb_device *dev) -{ - dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1); - msleep(10); - dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0); - - dib0700_ctrl_clock(dev, 72, 1); - - msleep(10); - dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1); -} - -static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap) -{ - stk7070pd_init(adap->dev); - - msleep(10); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - - if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, - stk7070pd_dib7000p_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", - __func__); - return -ENODEV; - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]); - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) -{ - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]); - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int novatd_read_status_override(struct dvb_frontend *fe, - fe_status_t *stat) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *dev = adap->dev; - struct dib0700_state *state = dev->priv; - int ret; - - ret = state->read_status(fe, stat); - - if (!ret) - dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, - !!(*stat & FE_HAS_LOCK)); - - return ret; -} - -static int novatd_sleep_override(struct dvb_frontend* fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *dev = adap->dev; - struct dib0700_state *state = dev->priv; - - /* turn off LED */ - dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0); - - return state->sleep(fe); -} - -/** - * novatd_frontend_attach - Nova-TD specific attach - * - * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for - * information purposes. - */ -static int novatd_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *dev = adap->dev; - struct dib0700_state *st = dev->priv; - - if (adap->id == 0) { - stk7070pd_init(dev); - - /* turn the power LED on, the other two off (just in case) */ - dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0); - dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0); - dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1); - - if (dib7000p_i2c_enumeration(&dev->i2c_adap, 2, 18, - stk7070pd_dib7000p_config) != 0) { - err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", - __func__); - return -ENODEV; - } - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &dev->i2c_adap, - adap->id == 0 ? 0x80 : 0x82, - &stk7070pd_dib7000p_config[adap->id]); - - if (adap->fe_adap[0].fe == NULL) - return -ENODEV; - - st->read_status = adap->fe_adap[0].fe->ops.read_status; - adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override; - st->sleep = adap->fe_adap[0].fe->ops.sleep; - adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override; - - return 0; -} - -/* S5H1411 */ -static struct s5h1411_config pinnacle_801e_config = { - .output_mode = S5H1411_PARALLEL_OUTPUT, - .gpio = S5H1411_GPIO_OFF, - .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, - .qam_if = S5H1411_IF_44000, - .vsb_if = S5H1411_IF_44000, - .inversion = S5H1411_INVERSION_OFF, - .status_mode = S5H1411_DEMODLOCKING -}; - -/* Pinnacle PCTV HD Pro 801e GPIOs map: - GPIO0 - currently unknown - GPIO1 - xc5000 tuner reset - GPIO2 - CX25843 sleep - GPIO3 - currently unknown - GPIO4 - currently unknown - GPIO6 - currently unknown - GPIO7 - currently unknown - GPIO9 - currently unknown - GPIO10 - CX25843 reset - */ -static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_state *st = adap->dev->priv; - - /* Make use of the new i2c functions from FW 1.20 */ - st->fw_use_new_i2c_api = 1; - - /* The s5h1411 requires the dib0700 to not be in master mode */ - st->disable_streaming_master_mode = 1; - - /* All msleep values taken from Windows USB trace */ - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); - dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(400); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - msleep(60); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(30); - dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); - dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); - msleep(30); - - /* Put the CX25843 to sleep for now since we're in digital mode */ - dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); - - /* GPIOs are initialized, do the attach */ - adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, - &adap->dev->i2c_adap); - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int dib0700_xc5000_tuner_callback(void *priv, int component, - int command, int arg) -{ - struct dvb_usb_adapter *adap = priv; - - if (command == XC5000_TUNER_RESET) { - /* Reset the tuner */ - dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); - msleep(10); - dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); - msleep(10); - } else { - err("xc5000: unknown tuner callback command: %d\n", command); - return -EINVAL; - } - - return 0; -} - -static struct xc5000_config s5h1411_xc5000_tunerconfig = { - .i2c_address = 0x64, - .if_khz = 5380, -}; - -static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) -{ - /* FIXME: generalize & move to common area */ - adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback; - - return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, - &s5h1411_xc5000_tunerconfig) - == NULL ? -ENODEV : 0; -} - -static int dib0700_xc4000_tuner_callback(void *priv, int component, - int command, int arg) -{ - struct dvb_usb_adapter *adap = priv; - - if (command == XC4000_TUNER_RESET) { - /* Reset the tuner */ - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); - msleep(10); - dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); - } else { - err("xc4000: unknown tuner callback command: %d\n", command); - return -EINVAL; - } - - return 0; -} - -static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = { - .band_caps = BAND_UHF | BAND_VHF, - .setup = 0x64, - .inv_gain = 0x02c8, - .time_stabiliz = 0x15, - .alpha_level = 0x00, - .thlock = 0x76, - .wbd_inv = 0x01, - .wbd_ref = 0x0b33, - .wbd_sel = 0x00, - .wbd_alpha = 0x02, - .agc1_max = 0x00, - .agc1_min = 0x00, - .agc2_max = 0x9b26, - .agc2_min = 0x26ca, - .agc1_pt1 = 0x00, - .agc1_pt2 = 0x00, - .agc1_pt3 = 0x00, - .agc1_slope1 = 0x00, - .agc1_slope2 = 0x00, - .agc2_pt1 = 0x00, - .agc2_pt2 = 0x80, - .agc2_slope1 = 0x1d, - .agc2_slope2 = 0x1d, - .alpha_mant = 0x11, - .alpha_exp = 0x1b, - .beta_mant = 0x17, - .beta_exp = 0x33, - .perform_agc_softsplit = 0x00, -}; - -static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = { - 60000, 30000, /* internal, sampling */ - 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ - 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, */ - /* ADClkSrc, modulo */ - (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */ - 39370534, /* ifreq */ - 20452225, /* timf */ - 30000000 /* xtal */ -}; - -/* FIXME: none of these inputs are validated yet */ -static struct dib7000p_config pctv_340e_config = { - .output_mpeg2_in_188_bytes = 1, - - .agc_config_count = 1, - .agc = &stk7700p_7000p_xc4000_agc_config, - .bw = &stk7700p_xc4000_pll_config, - - .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, - .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, - .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, -}; - -/* PCTV 340e GPIOs map: - dib0700: - GPIO2 - CX25843 sleep - GPIO3 - CS5340 reset - GPIO5 - IRD - GPIO6 - Power Supply - GPIO8 - LNA (1=off 0=on) - GPIO10 - CX25843 reset - dib7000: - GPIO8 - xc4000 reset - */ -static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_state *st = adap->dev->priv; - - /* Power Supply on */ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); - msleep(50); - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(100); /* Allow power supply to settle before probing */ - - /* cx25843 reset */ - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - msleep(1); /* cx25843 datasheet say 350us required */ - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - - /* LNA off for now */ - dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1); - - /* Put the CX25843 to sleep for now since we're in digital mode */ - dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); - - /* FIXME: not verified yet */ - dib0700_ctrl_clock(adap->dev, 72, 1); - - msleep(500); - - if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) { - /* Demodulator not found for some reason? */ - return -ENODEV; - } - - adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12, - &pctv_340e_config); - st->is_dib7000pc = 1; - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static struct xc4000_config dib7000p_xc4000_tunerconfig = { - .i2c_address = 0x61, - .default_pm = 1, - .dvb_amplitude = 0, - .set_smoothedcvbs = 0, - .if_khz = 5400 -}; - -static int xc4000_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct i2c_adapter *tun_i2c; - - /* The xc4000 is not on the main i2c bus */ - tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, - DIBX000_I2C_INTERFACE_TUNER, 1); - if (tun_i2c == NULL) { - printk(KERN_ERR "Could not reach tuner i2c bus\n"); - return 0; - } - - /* Setup the reset callback */ - adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback; - - return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c, - &dib7000p_xc4000_tunerconfig) - == NULL ? -ENODEV : 0; -} - -static struct lgdt3305_config hcw_lgdt3305_config = { - .i2c_addr = 0x0e, - .mpeg_mode = LGDT3305_MPEG_PARALLEL, - .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, - .tpvalid_polarity = LGDT3305_TP_VALID_LOW, - .deny_i2c_rptr = 0, - .spectral_inversion = 1, - .qam_if_khz = 6000, - .vsb_if_khz = 6000, - .usref_8vsb = 0x0500, -}; - -static struct mxl5007t_config hcw_mxl5007t_config = { - .xtal_freq_hz = MxL_XTAL_25_MHZ, - .if_freq_hz = MxL_IF_6_MHZ, - .invert_if = 1, -}; - -/* TIGER-ATSC map: - GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled) - GPIO1 - ANT_SEL (H: VPA, L: MCX) - GPIO4 - SCL2 - GPIO6 - EN_TUNER - GPIO7 - SDA2 - GPIO10 - DEM_RST - - MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB - */ -static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib0700_state *st = adap->dev->priv; - - /* Make use of the new i2c functions from FW 1.20 */ - st->fw_use_new_i2c_api = 1; - - st->disable_streaming_master_mode = 1; - - /* fe power enable */ - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); - msleep(30); - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); - msleep(30); - - /* demod reset */ - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(30); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); - msleep(30); - dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); - msleep(30); - - adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach, - &hcw_lgdt3305_config, - &adap->dev->i2c_adap); - - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap) -{ - return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0x60, - &hcw_mxl5007t_config) == NULL ? -ENODEV : 0; -} - - -/* DVB-USB and USB stuff follows */ -struct usb_device_id dib0700_usb_id_table[] = { -/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, -/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) }, - { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, - { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, - { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, -/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) }, - { USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) }, -/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) }, - { USB_DEVICE(USB_VID_PINNACLE, - USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, - { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, -/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, - { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, - { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, - { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, - { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, -/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) }, -/* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) }, - { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, - { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, -/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, - { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, - { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, - { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, -/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, - { USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, - { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) }, -/* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) }, - { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) }, - { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) }, -/* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) }, - { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) }, - { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) }, - { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) }, -/* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) }, - { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) }, - { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) }, -/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) }, - { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) }, - { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) }, -/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) }, - { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) }, -/* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) }, - { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) }, -/* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090E) }, - { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790E) }, -/* 80 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) }, - { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) }, - { 0 } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); - -#define DIB0700_DEFAULT_DEVICE_PROPERTIES \ - .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ - .usb_ctrl = DEVICE_SPECIFIC, \ - .firmware = "dvb-usb-dib0700-1.20.fw", \ - .download_firmware = dib0700_download_firmware, \ - .no_reconnect = 1, \ - .size_of_priv = sizeof(struct dib0700_state), \ - .i2c_algo = &dib0700_i2c_algo, \ - .identify_state = dib0700_identify_state - -#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \ - .streaming_ctrl = dib0700_streaming_ctrl, \ - .stream = { \ - .type = USB_BULK, \ - .count = 4, \ - .endpoint = ep, \ - .u = { \ - .bulk = { \ - .buffersize = 39480, \ - } \ - } \ - } - -struct dvb_usb_device_properties dib0700_devices[] = { - { - DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk7700p_pid_filter, - .pid_filter_ctrl = stk7700p_pid_filter_ctrl, - .frontend_attach = stk7700p_frontend_attach, - .tuner_attach = stk7700p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - }, - }, - - .num_device_descs = 8, - .devices = { - { "DiBcom STK7700P reference design", - { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] }, - { NULL }, - }, - { "Hauppauge Nova-T Stick", - { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL }, - { NULL }, - }, - { "AVerMedia AVerTV DVB-T Volar", - { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] }, - { NULL }, - }, - { "Compro Videomate U500", - { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] }, - { NULL }, - }, - { "Uniwill STK7700P based (Hama and others)", - { &dib0700_usb_id_table[7], NULL }, - { NULL }, - }, - { "Leadtek Winfast DTV Dongle (STK7700P based)", - { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, - { NULL }, - }, - { "AVerMedia AVerTV DVB-T Express", - { &dib0700_usb_id_table[20] }, - { NULL }, - }, - { "Gigabyte U7000", - { &dib0700_usb_id_table[21], NULL }, - { NULL }, - } - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = bristol_frontend_attach, - .tuner_attach = bristol_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - }, { - .num_frontends = 1, - .fe = {{ - .frontend_attach = bristol_frontend_attach, - .tuner_attach = bristol_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - }}, - } - }, - - .num_device_descs = 1, - .devices = { - { "Hauppauge Nova-T 500 Dual DVB-T", - { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7700d_frontend_attach, - .tuner_attach = stk7700d_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - }, { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7700d_frontend_attach, - .tuner_attach = stk7700d_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - }}, - } - }, - - .num_device_descs = 5, - .devices = { - { "Pinnacle PCTV 2000e", - { &dib0700_usb_id_table[11], NULL }, - { NULL }, - }, - { "Terratec Cinergy DT XS Diversity", - { &dib0700_usb_id_table[12], NULL }, - { NULL }, - }, - { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity", - { &dib0700_usb_id_table[13], NULL }, - { NULL }, - }, - { "DiBcom STK7700D reference design", - { &dib0700_usb_id_table[14], NULL }, - { NULL }, - }, - { "YUAN High-Tech DiBcom STK7700D", - { &dib0700_usb_id_table[55], NULL }, - { NULL }, - }, - - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7700P2_frontend_attach, - .tuner_attach = stk7700d_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - }, - }, - - .num_device_descs = 3, - .devices = { - { "ASUS My Cinema U3000 Mini DVBT Tuner", - { &dib0700_usb_id_table[23], NULL }, - { NULL }, - }, - { "Yuan EC372S", - { &dib0700_usb_id_table[31], NULL }, - { NULL }, - }, - { "Terratec Cinergy T Express", - { &dib0700_usb_id_table[42], NULL }, - { NULL }, - } - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7070p_frontend_attach, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 12, - .devices = { - { "DiBcom STK7070P reference design", - { &dib0700_usb_id_table[15], NULL }, - { NULL }, - }, - { "Pinnacle PCTV DVB-T Flash Stick", - { &dib0700_usb_id_table[16], NULL }, - { NULL }, - }, - { "Artec T14BR DVB-T", - { &dib0700_usb_id_table[22], NULL }, - { NULL }, - }, - { "ASUS My Cinema U3100 Mini DVBT Tuner", - { &dib0700_usb_id_table[24], NULL }, - { NULL }, - }, - { "Hauppauge Nova-T Stick", - { &dib0700_usb_id_table[25], NULL }, - { NULL }, - }, - { "Hauppauge Nova-T MyTV.t", - { &dib0700_usb_id_table[26], NULL }, - { NULL }, - }, - { "Pinnacle PCTV 72e", - { &dib0700_usb_id_table[29], NULL }, - { NULL }, - }, - { "Pinnacle PCTV 73e", - { &dib0700_usb_id_table[30], NULL }, - { NULL }, - }, - { "Elgato EyeTV DTT", - { &dib0700_usb_id_table[49], NULL }, - { NULL }, - }, - { "Yuan PD378S", - { &dib0700_usb_id_table[45], NULL }, - { NULL }, - }, - { "Elgato EyeTV Dtt Dlx PD378S", - { &dib0700_usb_id_table[50], NULL }, - { NULL }, - }, - { "Elgato EyeTV DTT rev. 2", - { &dib0700_usb_id_table[81], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7070p_frontend_attach, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 3, - .devices = { - { "Pinnacle PCTV 73A", - { &dib0700_usb_id_table[56], NULL }, - { NULL }, - }, - { "Pinnacle PCTV 73e SE", - { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL }, - { NULL }, - }, - { "Pinnacle PCTV 282e", - { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = novatd_frontend_attach, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - }, { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = novatd_frontend_attach, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - } - }, - - .num_device_descs = 1, - .devices = { - { "Hauppauge Nova-TD Stick (52009)", - { &dib0700_usb_id_table[35], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7070pd_frontend_attach0, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - }, { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7070pd_frontend_attach1, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - } - }, - - .num_device_descs = 5, - .devices = { - { "DiBcom STK7070PD reference design", - { &dib0700_usb_id_table[17], NULL }, - { NULL }, - }, - { "Pinnacle PCTV Dual DVB-T Diversity Stick", - { &dib0700_usb_id_table[18], NULL }, - { NULL }, - }, - { "Hauppauge Nova-TD-500 (84xxx)", - { &dib0700_usb_id_table[36], NULL }, - { NULL }, - }, - { "Terratec Cinergy DT USB XS Diversity/ T5", - { &dib0700_usb_id_table[43], - &dib0700_usb_id_table[53], NULL}, - { NULL }, - }, - { "Sony PlayTV", - { &dib0700_usb_id_table[44], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7070pd_frontend_attach0, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - }, { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7070pd_frontend_attach1, - .tuner_attach = dib7070p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - }}, - .size_of_priv = sizeof(struct dib0700_adapter_state), - } - }, - - .num_device_descs = 1, - .devices = { - { "Elgato EyeTV Diversity", - { &dib0700_usb_id_table[68], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_NEC_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7700ph_frontend_attach, - .tuner_attach = stk7700ph_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct - dib0700_adapter_state), - }, - }, - - .num_device_descs = 9, - .devices = { - { "Terratec Cinergy HT USB XE", - { &dib0700_usb_id_table[27], NULL }, - { NULL }, - }, - { "Pinnacle Expresscard 320cx", - { &dib0700_usb_id_table[28], NULL }, - { NULL }, - }, - { "Terratec Cinergy HT Express", - { &dib0700_usb_id_table[32], NULL }, - { NULL }, - }, - { "Gigabyte U8000-RH", - { &dib0700_usb_id_table[37], NULL }, - { NULL }, - }, - { "YUAN High-Tech STK7700PH", - { &dib0700_usb_id_table[38], NULL }, - { NULL }, - }, - { "Asus My Cinema-U3000Hybrid", - { &dib0700_usb_id_table[39], NULL }, - { NULL }, - }, - { "YUAN High-Tech MC770", - { &dib0700_usb_id_table[48], NULL }, - { NULL }, - }, - { "Leadtek WinFast DTV Dongle H", - { &dib0700_usb_id_table[51], NULL }, - { NULL }, - }, - { "YUAN High-Tech STK7700D", - { &dib0700_usb_id_table[54], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = s5h1411_frontend_attach, - .tuner_attach = xc5000_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct - dib0700_adapter_state), - }, - }, - - .num_device_descs = 2, - .devices = { - { "Pinnacle PCTV HD Pro USB Stick", - { &dib0700_usb_id_table[40], NULL }, - { NULL }, - }, - { "Pinnacle PCTV HD USB Stick", - { &dib0700_usb_id_table[41], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = lgdt3305_frontend_attach, - .tuner_attach = mxl5007t_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct - dib0700_adapter_state), - }, - }, - - .num_device_descs = 2, - .devices = { - { "Hauppauge ATSC MiniCard (B200)", - { &dib0700_usb_id_table[46], NULL }, - { NULL }, - }, - { "Hauppauge ATSC MiniCard (B210)", - { &dib0700_usb_id_table[47], NULL }, - { NULL }, - }, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7770p_frontend_attach, - .tuner_attach = dib7770p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 4, - .devices = { - { "DiBcom STK7770P reference design", - { &dib0700_usb_id_table[59], NULL }, - { NULL }, - }, - { "Terratec Cinergy T USB XXS (HD)/ T3", - { &dib0700_usb_id_table[33], - &dib0700_usb_id_table[52], - &dib0700_usb_id_table[60], NULL}, - { NULL }, - }, - { "TechniSat AirStar TeleStick 2", - { &dib0700_usb_id_table[74], NULL }, - { NULL }, - }, - { "Medion CTX1921 DVB-T USB", - { &dib0700_usb_id_table[75], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk80xx_pid_filter, - .pid_filter_ctrl = stk80xx_pid_filter_ctrl, - .frontend_attach = stk807x_frontend_attach, - .tuner_attach = dib807x_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 3, - .devices = { - { "DiBcom STK807xP reference design", - { &dib0700_usb_id_table[62], NULL }, - { NULL }, - }, - { "Prolink Pixelview SBTVD", - { &dib0700_usb_id_table[63], NULL }, - { NULL }, - }, - { "EvolutePC TVWay+", - { &dib0700_usb_id_table[64], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_NEC_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk80xx_pid_filter, - .pid_filter_ctrl = stk80xx_pid_filter_ctrl, - .frontend_attach = stk807xpvr_frontend_attach0, - .tuner_attach = dib807x_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk80xx_pid_filter, - .pid_filter_ctrl = stk80xx_pid_filter_ctrl, - .frontend_attach = stk807xpvr_frontend_attach1, - .tuner_attach = dib807x_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom STK807xPVR reference design", - { &dib0700_usb_id_table[61], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk80xx_pid_filter, - .pid_filter_ctrl = stk80xx_pid_filter_ctrl, - .frontend_attach = stk809x_frontend_attach, - .tuner_attach = dib809x_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom STK8096GP reference design", - { &dib0700_usb_id_table[67], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = dib90x0_pid_filter, - .pid_filter_ctrl = dib90x0_pid_filter_ctrl, - .frontend_attach = stk9090m_frontend_attach, - .tuner_attach = dib9090_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom STK9090M reference design", - { &dib0700_usb_id_table[69], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk80xx_pid_filter, - .pid_filter_ctrl = stk80xx_pid_filter_ctrl, - .frontend_attach = nim8096md_frontend_attach, - .tuner_attach = nim8096md_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom NIM8096MD reference design", - { &dib0700_usb_id_table[70], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = dib90x0_pid_filter, - .pid_filter_ctrl = dib90x0_pid_filter_ctrl, - .frontend_attach = nim9090md_frontend_attach, - .tuner_attach = nim9090md_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom NIM9090MD reference design", - { &dib0700_usb_id_table[71], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = nim7090_frontend_attach, - .tuner_attach = nim7090_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom NIM7090 reference design", - { &dib0700_usb_id_table[72], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = tfe7090pvr_frontend0_attach, - .tuner_attach = tfe7090pvr_tuner0_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = tfe7090pvr_frontend1_attach, - .tuner_attach = tfe7090pvr_tuner1_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom TFE7090PVR reference design", - { &dib0700_usb_id_table[73], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = pctv340e_frontend_attach, - .tuner_attach = xc4000_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - }}, - .size_of_priv = sizeof(struct - dib0700_adapter_state), - }, - }, - - .num_device_descs = 2, - .devices = { - { "Pinnacle PCTV 340e HD Pro USB Stick", - { &dib0700_usb_id_table[76], NULL }, - { NULL }, - }, - { "Pinnacle PCTV Hybrid Stick Solo", - { &dib0700_usb_id_table[77], NULL }, - { NULL }, - }, - }, - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = tfe7090e_frontend_attach, - .tuner_attach = tfe7090e_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - } }, - - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom TFE7090E reference design", - { &dib0700_usb_id_table[78], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk70x0p_pid_filter, - .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = tfe7790e_frontend_attach, - .tuner_attach = tfe7790e_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x03), - } }, - - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom TFE7790E reference design", - { &dib0700_usb_id_table[79], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .pid_filter = stk80xx_pid_filter, - .pid_filter_ctrl = stk80xx_pid_filter_ctrl, - .frontend_attach = tfe8096p_frontend_attach, - .tuner_attach = tfe8096p_tuner_attach, - - DIB0700_DEFAULT_STREAMING_CONFIG(0x02), - - } }, - - .size_of_priv = - sizeof(struct dib0700_adapter_state), - }, - }, - - .num_device_descs = 1, - .devices = { - { "DiBcom TFE8096P reference design", - { &dib0700_usb_id_table[80], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .module_name = "dib0700", - .rc_query = dib0700_rc_query_old_firmware, - .allowed_protos = RC_TYPE_RC5 | - RC_TYPE_RC6 | - RC_TYPE_NEC, - .change_protocol = dib0700_change_protocol, - }, - }, -}; - -int dib0700_device_count = ARRAY_SIZE(dib0700_devices); diff --git a/drivers/media/dvb/dvb-usb/dib07x0.h b/drivers/media/dvb/dvb-usb/dib07x0.h deleted file mode 100644 index 7e62c1018520..000000000000 --- a/drivers/media/dvb/dvb-usb/dib07x0.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _DIB07X0_H_ -#define _DIB07X0_H_ - -enum dib07x0_gpios { - GPIO0 = 0, - GPIO1 = 2, - GPIO2 = 3, - GPIO3 = 4, - GPIO4 = 5, - GPIO5 = 6, - GPIO6 = 8, - GPIO7 = 10, - GPIO8 = 11, - GPIO9 = 14, - GPIO10 = 15, -}; - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#endif diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c deleted file mode 100644 index a76bbb29ca36..000000000000 --- a/drivers/media/dvb/dvb-usb/dibusb-common.c +++ /dev/null @@ -1,479 +0,0 @@ -/* Common methods for dibusb-based-receivers. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dibusb.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (|-able))." DVB_USB_DEBUG_STATUS); -MODULE_LICENSE("GPL"); - -#define deb_info(args...) dprintk(debug,0x01,args) - -/* common stuff used by the different dibusb modules */ -int dibusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - if (adap->priv != NULL) { - struct dibusb_state *st = adap->priv; - if (st->ops.fifo_ctrl != NULL) - if (st->ops.fifo_ctrl(adap->fe_adap[0].fe, onoff)) { - err("error while controlling the fifo of the demod."); - return -ENODEV; - } - } - return 0; -} -EXPORT_SYMBOL(dibusb_streaming_ctrl); - -int dibusb_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) -{ - if (adap->priv != NULL) { - struct dibusb_state *st = adap->priv; - if (st->ops.pid_ctrl != NULL) - st->ops.pid_ctrl(adap->fe_adap[0].fe, - index, pid, onoff); - } - return 0; -} -EXPORT_SYMBOL(dibusb_pid_filter); - -int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - if (adap->priv != NULL) { - struct dibusb_state *st = adap->priv; - if (st->ops.pid_parse != NULL) - if (st->ops.pid_parse(adap->fe_adap[0].fe, onoff) < 0) - err("could not handle pid_parser"); - } - return 0; -} -EXPORT_SYMBOL(dibusb_pid_filter_ctrl); - -int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 b[3]; - int ret; - b[0] = DIBUSB_REQ_SET_IOCTL; - b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; - b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP; - ret = dvb_usb_generic_write(d,b,3); - msleep(10); - return ret; -} -EXPORT_SYMBOL(dibusb_power_ctrl); - -int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - u8 b[3] = { 0 }; - int ret; - - if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0) - return ret; - - if (onoff) { - b[0] = DIBUSB_REQ_SET_STREAMING_MODE; - b[1] = 0x00; - if ((ret = dvb_usb_generic_write(adap->dev,b,2)) < 0) - return ret; - } - - b[0] = DIBUSB_REQ_SET_IOCTL; - b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; - return dvb_usb_generic_write(adap->dev,b,3); -} -EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); - -int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - if (onoff) { - u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP }; - return dvb_usb_generic_write(d,b,3); - } else - return 0; -} -EXPORT_SYMBOL(dibusb2_0_power_ctrl); - -static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ - /* write only ? */ - int wo = (rbuf == NULL || rlen == 0), - len = 2 + wlen + (wo ? 0 : 2); - - sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; - sndbuf[1] = (addr << 1) | (wo ? 0 : 1); - - memcpy(&sndbuf[2],wbuf,wlen); - - if (!wo) { - sndbuf[wlen+2] = (rlen >> 8) & 0xff; - sndbuf[wlen+3] = rlen & 0xff; - } - - return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0); -} - -/* - * I2C master xfer function - */ -static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0 - && (msg[i+1].flags & I2C_M_RD)) { - if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len, - msg[i+1].buf,msg[i+1].len) < 0) - break; - i++; - } else if ((msg[i].flags & I2C_M_RD) == 0) { - if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0) - break; - } else if (msg[i].addr != 0x50) { - /* 0x50 is the address of the eeprom - we need to protect it - * from dibusb's bad i2c implementation: reads without - * writing the offset before are forbidden */ - if (dibusb_i2c_msg(d, msg[i].addr, NULL, 0, msg[i].buf, msg[i].len) < 0) - break; - } - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 dibusb_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -struct i2c_algorithm dibusb_i2c_algo = { - .master_xfer = dibusb_i2c_xfer, - .functionality = dibusb_i2c_func, -}; -EXPORT_SYMBOL(dibusb_i2c_algo); - -int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val) -{ - u8 wbuf[1] = { offs }; - return dibusb_i2c_msg(d, 0x50, wbuf, 1, val, 1); -} -EXPORT_SYMBOL(dibusb_read_eeprom_byte); - -/* 3000MC/P stuff */ -// Config Adjacent channels Perf -cal22 -static struct dibx000_agc_config dib3000p_mt2060_agc_config = { - .band_caps = BAND_VHF | BAND_UHF, - .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0), - - .agc1_max = 48497, - .agc1_min = 23593, - .agc2_max = 46531, - .agc2_min = 24904, - - .agc1_pt1 = 0x65, - .agc1_pt2 = 0x69, - - .agc1_slope1 = 0x51, - .agc1_slope2 = 0x27, - - .agc2_pt1 = 0, - .agc2_pt2 = 0x33, - - .agc2_slope1 = 0x35, - .agc2_slope2 = 0x37, -}; - -static struct dib3000mc_config stk3000p_dib3000p_config = { - &dib3000p_mt2060_agc_config, - - .max_time = 0x196, - .ln_adc_level = 0x1cc7, - - .output_mpeg2_in_188_bytes = 1, - - .agc_command1 = 1, - .agc_command2 = 1, -}; - -static struct dibx000_agc_config dib3000p_panasonic_agc_config = { - .band_caps = BAND_VHF | BAND_UHF, - .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0), - - .agc1_max = 56361, - .agc1_min = 22282, - .agc2_max = 47841, - .agc2_min = 36045, - - .agc1_pt1 = 0x3b, - .agc1_pt2 = 0x6b, - - .agc1_slope1 = 0x55, - .agc1_slope2 = 0x1d, - - .agc2_pt1 = 0, - .agc2_pt2 = 0x0a, - - .agc2_slope1 = 0x95, - .agc2_slope2 = 0x1e, -}; - -#if defined(CONFIG_DVB_DIB3000MC) || \ - (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE)) - -static struct dib3000mc_config mod3000p_dib3000p_config = { - &dib3000p_panasonic_agc_config, - - .max_time = 0x51, - .ln_adc_level = 0x1cc7, - - .output_mpeg2_in_188_bytes = 1, - - .agc_command1 = 1, - .agc_command2 = 1, -}; - -int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (adap->dev->udev->descriptor.idVendor == USB_VID_LITEON && - adap->dev->udev->descriptor.idProduct == - USB_PID_LITEON_DVB_T_WARM) { - msleep(1000); - } - - adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, - &adap->dev->i2c_adap, - DEFAULT_DIB3000P_I2C_ADDRESS, - &mod3000p_dib3000p_config); - if ((adap->fe_adap[0].fe) == NULL) - adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, - &adap->dev->i2c_adap, - DEFAULT_DIB3000MC_I2C_ADDRESS, - &mod3000p_dib3000p_config); - if ((adap->fe_adap[0].fe) != NULL) { - if (adap->priv != NULL) { - struct dibusb_state *st = adap->priv; - st->ops.pid_parse = dib3000mc_pid_parse; - st->ops.pid_ctrl = dib3000mc_pid_control; - } - return 0; - } - return -ENODEV; -} -EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach); - -static struct mt2060_config stk3000p_mt2060_config = { - 0x60 -}; - -int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dibusb_state *st = adap->priv; - u8 a,b; - u16 if1 = 1220; - struct i2c_adapter *tun_i2c; - - // First IF calibration for Liteon Sticks - if (adap->dev->udev->descriptor.idVendor == USB_VID_LITEON && - adap->dev->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) { - - dibusb_read_eeprom_byte(adap->dev,0x7E,&a); - dibusb_read_eeprom_byte(adap->dev,0x7F,&b); - - if (a == 0x00) - if1 += b; - else if (a == 0x80) - if1 -= b; - else - warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b); - - } else if (adap->dev->udev->descriptor.idVendor == USB_VID_DIBCOM && - adap->dev->udev->descriptor.idProduct == USB_PID_DIBCOM_MOD3001_WARM) { - u8 desc; - dibusb_read_eeprom_byte(adap->dev, 7, &desc); - if (desc == 2) { - a = 127; - do { - dibusb_read_eeprom_byte(adap->dev, a, &desc); - a--; - } while (a > 7 && (desc == 0xff || desc == 0x00)); - if (desc & 0x80) - if1 -= (0xff - desc); - else - if1 += desc; - } - } - - tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1); - if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) { - /* not found - use panasonic pll parameters */ - if (dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL) - return -ENOMEM; - } else { - st->mt2060_present = 1; - /* set the correct parameters for the dib3000p */ - dib3000mc_set_config(adap->fe_adap[0].fe, &stk3000p_dib3000p_config); - } - return 0; -} -EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach); -#endif - -/* - * common remote control stuff - */ -struct rc_map_table rc_map_dibusb_table[] = { - /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */ - { 0x0016, KEY_POWER }, - { 0x0010, KEY_MUTE }, - { 0x0003, KEY_1 }, - { 0x0001, KEY_2 }, - { 0x0006, KEY_3 }, - { 0x0009, KEY_4 }, - { 0x001d, KEY_5 }, - { 0x001f, KEY_6 }, - { 0x000d, KEY_7 }, - { 0x0019, KEY_8 }, - { 0x001b, KEY_9 }, - { 0x0015, KEY_0 }, - { 0x0005, KEY_CHANNELUP }, - { 0x0002, KEY_CHANNELDOWN }, - { 0x001e, KEY_VOLUMEUP }, - { 0x000a, KEY_VOLUMEDOWN }, - { 0x0011, KEY_RECORD }, - { 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */ - { 0x0014, KEY_PLAY }, - { 0x001a, KEY_STOP }, - { 0x0040, KEY_REWIND }, - { 0x0012, KEY_FASTFORWARD }, - { 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */ - { 0x004c, KEY_PAUSE }, - { 0x004d, KEY_SCREEN }, /* Full screen mode. */ - { 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ - /* additional keys TwinHan VisionPlus, the Artec seemingly not have */ - { 0x000c, KEY_CANCEL }, /* Cancel */ - { 0x001c, KEY_EPG }, /* EPG */ - { 0x0000, KEY_TAB }, /* Tab */ - { 0x0048, KEY_INFO }, /* Preview */ - { 0x0004, KEY_LIST }, /* RecordList */ - { 0x000f, KEY_TEXT }, /* Teletext */ - /* Key codes for the KWorld/ADSTech/JetWay remote. */ - { 0x8612, KEY_POWER }, - { 0x860f, KEY_SELECT }, /* source */ - { 0x860c, KEY_UNKNOWN }, /* scan */ - { 0x860b, KEY_EPG }, - { 0x8610, KEY_MUTE }, - { 0x8601, KEY_1 }, - { 0x8602, KEY_2 }, - { 0x8603, KEY_3 }, - { 0x8604, KEY_4 }, - { 0x8605, KEY_5 }, - { 0x8606, KEY_6 }, - { 0x8607, KEY_7 }, - { 0x8608, KEY_8 }, - { 0x8609, KEY_9 }, - { 0x860a, KEY_0 }, - { 0x8618, KEY_ZOOM }, - { 0x861c, KEY_UNKNOWN }, /* preview */ - { 0x8613, KEY_UNKNOWN }, /* snap */ - { 0x8600, KEY_UNDO }, - { 0x861d, KEY_RECORD }, - { 0x860d, KEY_STOP }, - { 0x860e, KEY_PAUSE }, - { 0x8616, KEY_PLAY }, - { 0x8611, KEY_BACK }, - { 0x8619, KEY_FORWARD }, - { 0x8614, KEY_UNKNOWN }, /* pip */ - { 0x8615, KEY_ESC }, - { 0x861a, KEY_UP }, - { 0x861e, KEY_DOWN }, - { 0x861f, KEY_LEFT }, - { 0x861b, KEY_RIGHT }, - - /* Key codes for the DiBcom MOD3000 remote. */ - { 0x8000, KEY_MUTE }, - { 0x8001, KEY_TEXT }, - { 0x8002, KEY_HOME }, - { 0x8003, KEY_POWER }, - - { 0x8004, KEY_RED }, - { 0x8005, KEY_GREEN }, - { 0x8006, KEY_YELLOW }, - { 0x8007, KEY_BLUE }, - - { 0x8008, KEY_DVD }, - { 0x8009, KEY_AUDIO }, - { 0x800a, KEY_IMAGES }, /* Pictures */ - { 0x800b, KEY_VIDEO }, - - { 0x800c, KEY_BACK }, - { 0x800d, KEY_UP }, - { 0x800e, KEY_RADIO }, - { 0x800f, KEY_EPG }, - - { 0x8010, KEY_LEFT }, - { 0x8011, KEY_OK }, - { 0x8012, KEY_RIGHT }, - { 0x8013, KEY_UNKNOWN }, /* SAP */ - - { 0x8014, KEY_TV }, - { 0x8015, KEY_DOWN }, - { 0x8016, KEY_MENU }, /* DVD Menu */ - { 0x8017, KEY_LAST }, - - { 0x8018, KEY_RECORD }, - { 0x8019, KEY_STOP }, - { 0x801a, KEY_PAUSE }, - { 0x801b, KEY_PLAY }, - - { 0x801c, KEY_PREVIOUS }, - { 0x801d, KEY_REWIND }, - { 0x801e, KEY_FASTFORWARD }, - { 0x801f, KEY_NEXT}, - - { 0x8040, KEY_1 }, - { 0x8041, KEY_2 }, - { 0x8042, KEY_3 }, - { 0x8043, KEY_CHANNELUP }, - - { 0x8044, KEY_4 }, - { 0x8045, KEY_5 }, - { 0x8046, KEY_6 }, - { 0x8047, KEY_CHANNELDOWN }, - - { 0x8048, KEY_7 }, - { 0x8049, KEY_8 }, - { 0x804a, KEY_9 }, - { 0x804b, KEY_VOLUMEUP }, - - { 0x804c, KEY_CLEAR }, - { 0x804d, KEY_0 }, - { 0x804e, KEY_ENTER }, - { 0x804f, KEY_VOLUMEDOWN }, -}; -EXPORT_SYMBOL(rc_map_dibusb_table); - -int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE; - dvb_usb_generic_rw(d,&cmd,1,key,5,0); - dvb_usb_nec_rc_key_to_event(d,key,event,state); - if (key[0] != 0) - deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); - return 0; -} -EXPORT_SYMBOL(dibusb_rc_query); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c deleted file mode 100644 index a4ac37e0e98b..000000000000 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ /dev/null @@ -1,471 +0,0 @@ -/* DVB USB compliant linux driver for mobile DVB-T USB devices based on - * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * based on GPL code from DiBcom, which has - * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dibusb.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dibusb_state *st = adap->priv; - - return st->ops.tuner_pass_ctrl(fe, enable, st->tuner_addr); -} - -static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dib3000_config demod_cfg; - struct dibusb_state *st = adap->priv; - - demod_cfg.demod_address = 0x8; - - adap->fe_adap[0].fe = dvb_attach(dib3000mb_attach, &demod_cfg, - &adap->dev->i2c_adap, &st->ops); - if ((adap->fe_adap[0].fe) == NULL) - return -ENODEV; - - adap->fe_adap[0].fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl; - - return 0; -} - -static int dibusb_thomson_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dibusb_state *st = adap->priv; - - st->tuner_addr = 0x61; - - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, - DVB_PLL_TUA6010XS); - return 0; -} - -static int dibusb_panasonic_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct dibusb_state *st = adap->priv; - - st->tuner_addr = 0x60; - - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, - DVB_PLL_TDA665X); - return 0; -} - -/* Some of the Artec 1.1 device aren't equipped with the default tuner - * (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures - * this out. */ -static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap) -{ - u8 b[2] = { 0,0 }, b2[1]; - int ret = 0; - struct i2c_msg msg[2] = { - { .flags = 0, .buf = b, .len = 2 }, - { .flags = I2C_M_RD, .buf = b2, .len = 1 }, - }; - struct dibusb_state *st = adap->priv; - - /* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */ - msg[0].addr = msg[1].addr = st->tuner_addr = 0x60; - - if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) - adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1); - - if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) { - err("tuner i2c write failed."); - ret = -EREMOTEIO; - } - - if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) - adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0); - - if (b2[0] == 0xfe) { - info("This device has the Thomson Cable onboard. Which is default."); - ret = dibusb_thomson_tuner_attach(adap); - } else { - info("This device has the Panasonic ENV77H11D5 onboard."); - ret = dibusb_panasonic_tuner_attach(adap); - } - - return ret; -} - -/* USB Driver stuff */ -static struct dvb_usb_device_properties dibusb1_1_properties; -static struct dvb_usb_device_properties dibusb1_1_an2235_properties; -static struct dvb_usb_device_properties dibusb2_0b_properties; -static struct dvb_usb_device_properties artec_t1_usb2_properties; - -static int dibusb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &dibusb2_0b_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties, - THIS_MODULE, NULL, adapter_nr)) - return 0; - - return -EINVAL; -} - -/* do not change the order of the ID table */ -static struct usb_device_id dibusb_dib3000mb_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_COLD) }, -/* 01 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_WARM) }, -/* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, -/* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, -/* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, -/* 05 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, -/* 06 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, -/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, -/* 08 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, -/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, -/* 10 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, -/* 11 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, -/* 12 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, -/* 13 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, -/* 14 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, -/* 15 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_COLD) }, -/* 16 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_WARM) }, -/* 17 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, -/* 18 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, -/* 19 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, -/* 20 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, -/* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, -/* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, -/* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, - -/* device ID with default DIBUSB2_0-firmware and with the hacked firmware */ -/* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, -/* 25 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_COLD) }, -/* 26 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_WARM) }, - -/* 27 */ { USB_DEVICE(USB_VID_KWORLD, USB_PID_KWORLD_VSTREAM_COLD) }, - -/* 28 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, -/* 29 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, - -/* - * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices - * we don't catch these faulty IDs (namely 'Cypress FX1 USB controller') that - * have been left on the device. If you don't have such a device but an Artec - * device that's supposed to work with this driver but is not detected by it, - * free to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY via your kernel config. - */ - -#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY -/* 30 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, -#endif - - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table); - -static struct dvb_usb_device_properties dibusb1_1_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_AN2135, - - .firmware = "dvb-usb-dibusb-5.0.0.11.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 16, - - .streaming_ctrl = dibusb_streaming_ctrl, - .pid_filter = dibusb_pid_filter, - .pid_filter_ctrl = dibusb_pid_filter_ctrl, - .frontend_attach = dibusb_dib3000mb_frontend_attach, - .tuner_attach = dibusb_tuner_probe_and_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - } - }, - - .power_ctrl = dibusb_power_ctrl, - - .rc.legacy = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_map_table = rc_map_dibusb_table, - .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ - .rc_query = dibusb_rc_query, - }, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 9, - .devices = { - { "AVerMedia AverTV DVBT USB1.1", - { &dibusb_dib3000mb_table[0], NULL }, - { &dibusb_dib3000mb_table[1], NULL }, - }, - { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", - { &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL}, - { &dibusb_dib3000mb_table[3], NULL }, - }, - { "DiBcom USB1.1 DVB-T reference design (MOD3000)", - { &dibusb_dib3000mb_table[5], NULL }, - { &dibusb_dib3000mb_table[6], NULL }, - }, - { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", - { &dibusb_dib3000mb_table[7], NULL }, - { &dibusb_dib3000mb_table[8], NULL }, - }, - { "Grandtec USB1.1 DVB-T", - { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, - { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, - }, - { "Unknown USB1.1 DVB-T device ???? please report the name to the author", - { &dibusb_dib3000mb_table[13], NULL }, - { &dibusb_dib3000mb_table[14], NULL }, - }, - { "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device", - { &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL}, - { &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL}, - }, - { "Artec T1 USB1.1 TVBOX with AN2135", - { &dibusb_dib3000mb_table[19], NULL }, - { &dibusb_dib3000mb_table[20], NULL }, - }, - { "VideoWalker DVB-T USB", - { &dibusb_dib3000mb_table[25], NULL }, - { &dibusb_dib3000mb_table[26], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties dibusb1_1_an2235_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = CYPRESS_AN2235, - - .firmware = "dvb-usb-dibusb-an2235-01.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER, - .pid_filter_count = 16, - - .streaming_ctrl = dibusb_streaming_ctrl, - .pid_filter = dibusb_pid_filter, - .pid_filter_ctrl = dibusb_pid_filter_ctrl, - .frontend_attach = dibusb_dib3000mb_frontend_attach, - .tuner_attach = dibusb_tuner_probe_and_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - }, - }, - .power_ctrl = dibusb_power_ctrl, - - .rc.legacy = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_map_table = rc_map_dibusb_table, - .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ - .rc_query = dibusb_rc_query, - }, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - -#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY - .num_device_descs = 2, -#else - .num_device_descs = 1, -#endif - .devices = { - { "Artec T1 USB1.1 TVBOX with AN2235", - { &dibusb_dib3000mb_table[21], NULL }, - { &dibusb_dib3000mb_table[22], NULL }, - }, -#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY - { "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)", - { &dibusb_dib3000mb_table[30], NULL }, - { NULL }, - }, - { NULL }, -#endif - } -}; - -static struct dvb_usb_device_properties dibusb2_0b_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .firmware = "dvb-usb-adstech-usb2-02.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 16, - - .streaming_ctrl = dibusb2_0_streaming_ctrl, - .pid_filter = dibusb_pid_filter, - .pid_filter_ctrl = dibusb_pid_filter_ctrl, - .frontend_attach = dibusb_dib3000mb_frontend_attach, - .tuner_attach = dibusb_thomson_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - } - }, - .power_ctrl = dibusb2_0_power_ctrl, - - .rc.legacy = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_map_table = rc_map_dibusb_table, - .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ - .rc_query = dibusb_rc_query, - }, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 2, - .devices = { - { "KWorld/ADSTech Instant DVB-T USB2.0", - { &dibusb_dib3000mb_table[23], NULL }, - { &dibusb_dib3000mb_table[24], NULL }, - }, - { "KWorld Xpert DVB-T USB2.0", - { &dibusb_dib3000mb_table[27], NULL }, - { NULL } - }, - { NULL }, - } -}; - -static struct dvb_usb_device_properties artec_t1_usb2_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .firmware = "dvb-usb-dibusb-6.0.0.8.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 16, - - .streaming_ctrl = dibusb2_0_streaming_ctrl, - .pid_filter = dibusb_pid_filter, - .pid_filter_ctrl = dibusb_pid_filter_ctrl, - .frontend_attach = dibusb_dib3000mb_frontend_attach, - .tuner_attach = dibusb_tuner_probe_and_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - } - }, - .power_ctrl = dibusb2_0_power_ctrl, - - .rc.legacy = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_map_table = rc_map_dibusb_table, - .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ - .rc_query = dibusb_rc_query, - }, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Artec T1 USB2.0", - { &dibusb_dib3000mb_table[28], NULL }, - { &dibusb_dib3000mb_table[29], NULL }, - }, - { NULL }, - } -}; - -static struct usb_driver dibusb_driver = { - .name = "dvb_usb_dibusb_mb", - .probe = dibusb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = dibusb_dib3000mb_table, -}; - -module_usb_driver(dibusb_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c deleted file mode 100644 index 9d1a59d09c52..000000000000 --- a/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ /dev/null @@ -1,149 +0,0 @@ -/* DVB USB compliant linux driver for mobile DVB-T USB devices based on - * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-C/P) - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * based on GPL code from DiBcom, which has - * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dibusb.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -/* USB Driver stuff */ -static struct dvb_usb_device_properties dibusb_mc_properties; - -static int dibusb_mc_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - return dvb_usb_device_init(intf, &dibusb_mc_properties, THIS_MODULE, - NULL, adapter_nr); -} - -/* do not change the order of the ID table */ -static struct usb_device_id dibusb_dib3000mc_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) }, -/* 01 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) }, -/* 02 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, -/* 03 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? ) -/* 04 */ { USB_DEVICE(USB_VID_LITEON, USB_PID_LITEON_DVB_T_COLD) }, -/* 05 */ { USB_DEVICE(USB_VID_LITEON, USB_PID_LITEON_DVB_T_WARM) }, -/* 06 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_DIGIVOX_MINI_SL_COLD) }, -/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_DIGIVOX_MINI_SL_WARM) }, -/* 08 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB2_COLD) }, -/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB2_WARM) }, -/* 10 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14_COLD) }, -/* 11 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14_WARM) }, -/* 12 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_COLD) }, -/* 13 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_WARM) }, -/* 14 */ { USB_DEVICE(USB_VID_HUMAX_COEX, USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD) }, -/* 15 */ { USB_DEVICE(USB_VID_HUMAX_COEX, USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table); - -static struct dvb_usb_device_properties dibusb_mc_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-dibusb-6.0.0.8.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - .streaming_ctrl = dibusb2_0_streaming_ctrl, - .pid_filter = dibusb_pid_filter, - .pid_filter_ctrl = dibusb_pid_filter_ctrl, - .frontend_attach = dibusb_dib3000mc_frontend_attach, - .tuner_attach = dibusb_dib3000mc_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - } - }, - .power_ctrl = dibusb2_0_power_ctrl, - - .rc.legacy = { - .rc_interval = DEFAULT_RC_INTERVAL, - .rc_map_table = rc_map_dibusb_table, - .rc_map_size = 111, /* FIXME */ - .rc_query = dibusb_rc_query, - }, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 8, - .devices = { - { "DiBcom USB2.0 DVB-T reference design (MOD3000P)", - { &dibusb_dib3000mc_table[0], NULL }, - { &dibusb_dib3000mc_table[1], NULL }, - }, - { "Artec T1 USB2.0 TVBOX (please check the warm ID)", - { &dibusb_dib3000mc_table[2], NULL }, - { &dibusb_dib3000mc_table[3], NULL }, - }, - { "LITE-ON USB2.0 DVB-T Tuner", - /* Also rebranded as Intuix S800, Toshiba */ - { &dibusb_dib3000mc_table[4], NULL }, - { &dibusb_dib3000mc_table[5], NULL }, - }, - { "MSI Digivox Mini SL", - { &dibusb_dib3000mc_table[6], NULL }, - { &dibusb_dib3000mc_table[7], NULL }, - }, - { "GRAND - USB2.0 DVB-T adapter", - { &dibusb_dib3000mc_table[8], NULL }, - { &dibusb_dib3000mc_table[9], NULL }, - }, - { "Artec T14 - USB2.0 DVB-T", - { &dibusb_dib3000mc_table[10], NULL }, - { &dibusb_dib3000mc_table[11], NULL }, - }, - { "Leadtek - USB2.0 Winfast DTV dongle", - { &dibusb_dib3000mc_table[12], NULL }, - { &dibusb_dib3000mc_table[13], NULL }, - }, - { "Humax/Coex DVB-T USB Stick 2.0 High Speed", - { &dibusb_dib3000mc_table[14], NULL }, - { &dibusb_dib3000mc_table[15], NULL }, - }, - { NULL }, - } -}; - -static struct usb_driver dibusb_mc_driver = { - .name = "dvb_usb_dibusb_mc", - .probe = dibusb_mc_probe, - .disconnect = dvb_usb_device_exit, - .id_table = dibusb_dib3000mc_table, -}; - -module_usb_driver(dibusb_mc_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for DiBcom USB2.0 DVB-T (DiB3000M-C/P based) devices"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h deleted file mode 100644 index e47c321b3ffc..000000000000 --- a/drivers/media/dvb/dvb-usb/dibusb.h +++ /dev/null @@ -1,131 +0,0 @@ -/* Header file for all dibusb-based-receivers. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_DIBUSB_H_ -#define _DVB_USB_DIBUSB_H_ - -#ifndef DVB_USB_LOG_PREFIX - #define DVB_USB_LOG_PREFIX "dibusb" -#endif -#include "dvb-usb.h" - -#include "dib3000.h" -#include "dib3000mc.h" -#include "mt2060.h" - -/* - * protocol of all dibusb related devices - */ - -/* - * bulk msg to/from endpoint 0x01 - * - * general structure: - * request_byte parameter_bytes - */ - -#define DIBUSB_REQ_START_READ 0x00 -#define DIBUSB_REQ_START_DEMOD 0x01 - -/* - * i2c read - * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word - * bulk read: byte_buffer (length_word bytes) - */ -#define DIBUSB_REQ_I2C_READ 0x02 - -/* - * i2c write - * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes - */ -#define DIBUSB_REQ_I2C_WRITE 0x03 - -/* - * polling the value of the remote control - * bulk write: 0x04 - * bulk read: byte_buffer (5 bytes) - */ -#define DIBUSB_REQ_POLL_REMOTE 0x04 - -/* additional status values for Hauppauge Remote Control Protocol */ -#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01 -#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03 - -/* streaming mode: - * bulk write: 0x05 mode_byte - * - * mode_byte is mostly 0x00 - */ -#define DIBUSB_REQ_SET_STREAMING_MODE 0x05 - -/* interrupt the internal read loop, when blocking */ -#define DIBUSB_REQ_INTR_READ 0x06 - -/* io control - * 0x07 cmd_byte param_bytes - * - * param_bytes can be up to 32 bytes - * - * cmd_byte function parameter name - * 0x00 power mode - * 0x00 sleep - * 0x01 wakeup - * - * 0x01 enable streaming - * 0x02 disable streaming - * - * - */ -#define DIBUSB_REQ_SET_IOCTL 0x07 - -/* IOCTL commands */ - -/* change the power mode in firmware */ -#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00 -#define DIBUSB_IOCTL_POWER_SLEEP 0x00 -#define DIBUSB_IOCTL_POWER_WAKEUP 0x01 - -/* modify streaming of the FX2 */ -#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 -#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 - -struct dibusb_state { - struct dib_fe_xfer_ops ops; - int mt2060_present; - u8 tuner_addr; -}; - -struct dibusb_device_state { - /* for RC5 remote control */ - int old_toggle; - int last_repeat_count; -}; - -extern struct i2c_algorithm dibusb_i2c_algo; - -extern int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *); -extern int dibusb_dib3000mc_tuner_attach (struct dvb_usb_adapter *); - -extern int dibusb_streaming_ctrl(struct dvb_usb_adapter *, int); -extern int dibusb_pid_filter(struct dvb_usb_adapter *, int, u16, int); -extern int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *, int); -extern int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *, int); - -extern int dibusb_power_ctrl(struct dvb_usb_device *, int); -extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int); - -#define DEFAULT_RC_INTERVAL 150 -//#define DEFAULT_RC_INTERVAL 100000 - -extern struct rc_map_table rc_map_dibusb_table[]; -extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *); -extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *); - -#endif diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c deleted file mode 100644 index ff34419a4c88..000000000000 --- a/drivers/media/dvb/dvb-usb/digitv.c +++ /dev/null @@ -1,354 +0,0 @@ -/* DVB USB compliant linux driver for Nebula Electronics uDigiTV DVB-T USB2.0 - * receiver - * - * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) - * - * partly based on the SDK published by Nebula Electronics - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "digitv.h" - -#include "mt352.h" -#include "nxt6000.h" - -/* debug */ -static int dvb_usb_digitv_debug; -module_param_named(debug,dvb_usb_digitv_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define deb_rc(args...) dprintk(dvb_usb_digitv_debug,0x01,args) - -static int digitv_ctrl_msg(struct dvb_usb_device *d, - u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 sndbuf[7],rcvbuf[7]; - memset(sndbuf,0,7); memset(rcvbuf,0,7); - - sndbuf[0] = cmd; - sndbuf[1] = vv; - sndbuf[2] = wo ? wlen : rlen; - - if (wo) { - memcpy(&sndbuf[3],wbuf,wlen); - dvb_usb_generic_write(d,sndbuf,7); - } else { - dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10); - memcpy(rbuf,&rcvbuf[3],rlen); - } - return 0; -} - -/* I2C */ -static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - if (num > 2) - warn("more than 2 i2c messages at a time is not handled yet. TODO."); - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0, - msg[i+1].buf,msg[i+1].len) < 0) - break; - i++; - } else - if (digitv_ctrl_msg(d,USB_WRITE_COFDM, msg[i].buf[0], - &msg[i].buf[1],msg[i].len-1,NULL,0) < 0) - break; - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 digitv_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm digitv_i2c_algo = { - .master_xfer = digitv_i2c_xfer, - .functionality = digitv_i2c_func, -}; - -/* Callbacks for DVB USB */ -static int digitv_identify_state (struct usb_device *udev, struct - dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; - return 0; -} - -static int digitv_mt352_demod_init(struct dvb_frontend *fe) -{ - static u8 reset_buf[] = { 0x89, 0x38, 0x8a, 0x2d, 0x50, 0x80 }; - static u8 init_buf[] = { 0x68, 0xa0, 0x8e, 0x40, 0x53, 0x50, - 0x67, 0x20, 0x7d, 0x01, 0x7c, 0x00, 0x7a, 0x00, - 0x79, 0x20, 0x57, 0x05, 0x56, 0x31, 0x88, 0x0f, - 0x75, 0x32 }; - int i; - - for (i = 0; i < ARRAY_SIZE(reset_buf); i += 2) - mt352_write(fe, &reset_buf[i], 2); - - msleep(1); - - for (i = 0; i < ARRAY_SIZE(init_buf); i += 2) - mt352_write(fe, &init_buf[i], 2); - - return 0; -} - -static struct mt352_config digitv_mt352_config = { - .demod_init = digitv_mt352_demod_init, -}; - -static int digitv_nxt6000_tuner_set_params(struct dvb_frontend *fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - u8 b[5]; - - fe->ops.tuner_ops.calc_regs(fe, b, sizeof(b)); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - return digitv_ctrl_msg(adap->dev, USB_WRITE_TUNER, 0, &b[1], 4, NULL, 0); -} - -static struct nxt6000_config digitv_nxt6000_config = { - .clock_inversion = 1, -}; - -static int digitv_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct digitv_state *st = adap->dev->priv; - - adap->fe_adap[0].fe = dvb_attach(mt352_attach, &digitv_mt352_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) { - st->is_nxt6000 = 0; - return 0; - } - adap->fe_adap[0].fe = dvb_attach(nxt6000_attach, - &digitv_nxt6000_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) != NULL) { - st->is_nxt6000 = 1; - return 0; - } - return -EIO; -} - -static int digitv_tuner_attach(struct dvb_usb_adapter *adap) -{ - struct digitv_state *st = adap->dev->priv; - - if (!dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, NULL, DVB_PLL_TDED4)) - return -ENODEV; - - if (st->is_nxt6000) - adap->fe_adap[0].fe->ops.tuner_ops.set_params = digitv_nxt6000_tuner_set_params; - - return 0; -} - -static struct rc_map_table rc_map_digitv_table[] = { - { 0x5f55, KEY_0 }, - { 0x6f55, KEY_1 }, - { 0x9f55, KEY_2 }, - { 0xaf55, KEY_3 }, - { 0x5f56, KEY_4 }, - { 0x6f56, KEY_5 }, - { 0x9f56, KEY_6 }, - { 0xaf56, KEY_7 }, - { 0x5f59, KEY_8 }, - { 0x6f59, KEY_9 }, - { 0x9f59, KEY_TV }, - { 0xaf59, KEY_AUX }, - { 0x5f5a, KEY_DVD }, - { 0x6f5a, KEY_POWER }, - { 0x9f5a, KEY_CAMERA }, /* labelled 'Picture' */ - { 0xaf5a, KEY_AUDIO }, - { 0x5f65, KEY_INFO }, - { 0x6f65, KEY_F13 }, /* 16:9 */ - { 0x9f65, KEY_F14 }, /* 14:9 */ - { 0xaf65, KEY_EPG }, - { 0x5f66, KEY_EXIT }, - { 0x6f66, KEY_MENU }, - { 0x9f66, KEY_UP }, - { 0xaf66, KEY_DOWN }, - { 0x5f69, KEY_LEFT }, - { 0x6f69, KEY_RIGHT }, - { 0x9f69, KEY_ENTER }, - { 0xaf69, KEY_CHANNELUP }, - { 0x5f6a, KEY_CHANNELDOWN }, - { 0x6f6a, KEY_VOLUMEUP }, - { 0x9f6a, KEY_VOLUMEDOWN }, - { 0xaf6a, KEY_RED }, - { 0x5f95, KEY_GREEN }, - { 0x6f95, KEY_YELLOW }, - { 0x9f95, KEY_BLUE }, - { 0xaf95, KEY_SUBTITLE }, - { 0x5f96, KEY_F15 }, /* AD */ - { 0x6f96, KEY_TEXT }, - { 0x9f96, KEY_MUTE }, - { 0xaf96, KEY_REWIND }, - { 0x5f99, KEY_STOP }, - { 0x6f99, KEY_PLAY }, - { 0x9f99, KEY_FASTFORWARD }, - { 0xaf99, KEY_F16 }, /* chapter */ - { 0x5f9a, KEY_PAUSE }, - { 0x6f9a, KEY_PLAY }, - { 0x9f9a, KEY_RECORD }, - { 0xaf9a, KEY_F17 }, /* picture in picture */ - { 0x5fa5, KEY_KPPLUS }, /* zoom in */ - { 0x6fa5, KEY_KPMINUS }, /* zoom out */ - { 0x9fa5, KEY_F18 }, /* capture */ - { 0xafa5, KEY_F19 }, /* web */ - { 0x5fa6, KEY_EMAIL }, - { 0x6fa6, KEY_PHONE }, - { 0x9fa6, KEY_PC }, -}; - -static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - int i; - u8 key[5]; - u8 b[4] = { 0 }; - - *event = 0; - *state = REMOTE_NO_KEY_PRESSED; - - digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4); - - /* Tell the device we've read the remote. Not sure how necessary - this is, but the Nebula SDK does it. */ - digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0); - - /* if something is inside the buffer, simulate key press */ - if (key[1] != 0) - { - for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { - if (rc5_custom(&d->props.rc.legacy.rc_map_table[i]) == key[1] && - rc5_data(&d->props.rc.legacy.rc_map_table[i]) == key[2]) { - *event = d->props.rc.legacy.rc_map_table[i].keycode; - *state = REMOTE_KEY_PRESSED; - return 0; - } - } - } - - if (key[0] != 0) - deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); - return 0; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties digitv_properties; - -static int digitv_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct dvb_usb_device *d; - int ret = dvb_usb_device_init(intf, &digitv_properties, THIS_MODULE, &d, - adapter_nr); - if (ret == 0) { - u8 b[4] = { 0 }; - - if (d != NULL) { /* do that only when the firmware is loaded */ - b[0] = 1; - digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0); - - b[0] = 0; - digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0); - } - } - return ret; -} - -static struct usb_device_id digitv_table [] = { - { USB_DEVICE(USB_VID_ANCHOR, USB_PID_NEBULA_DIGITV) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, digitv_table); - -static struct dvb_usb_device_properties digitv_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-digitv-02.fw", - - .size_of_priv = sizeof(struct digitv_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = digitv_frontend_attach, - .tuner_attach = digitv_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .identify_state = digitv_identify_state, - - .rc.legacy = { - .rc_interval = 1000, - .rc_map_table = rc_map_digitv_table, - .rc_map_size = ARRAY_SIZE(rc_map_digitv_table), - .rc_query = digitv_rc_query, - }, - - .i2c_algo = &digitv_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Nebula Electronics uDigiTV DVB-T USB2.0)", - { &digitv_table[0], NULL }, - { NULL }, - }, - { NULL }, - } -}; - -static struct usb_driver digitv_driver = { - .name = "dvb_usb_digitv", - .probe = digitv_probe, - .disconnect = dvb_usb_device_exit, - .id_table = digitv_table, -}; - -module_usb_driver(digitv_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for Nebula Electronics uDigiTV DVB-T USB2.0"); -MODULE_VERSION("1.0-alpha"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/digitv.h b/drivers/media/dvb/dvb-usb/digitv.h deleted file mode 100644 index 908c09f4966b..000000000000 --- a/drivers/media/dvb/dvb-usb/digitv.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _DVB_USB_DIGITV_H_ -#define _DVB_USB_DIGITV_H_ - -#define DVB_USB_LOG_PREFIX "digitv" -#include "dvb-usb.h" - -struct digitv_state { - int is_nxt6000; -}; - -/* protocol (from usblogging and the SDK: - * - * Always 7 bytes bulk message(s) for controlling - * - * First byte describes the command. Reads are 2 consecutive transfer (as always). - * - * General structure: - * - * write or first message of a read: - * <cmdbyte> VV <len> B0 B1 B2 B3 - * - * second message of a read - * <cmdbyte> VV <len> R0 R1 R2 R3 - * - * whereas 0 < len <= 4 - * - * I2C address is stored somewhere inside the device. - * - * 0x01 read from EEPROM - * VV = offset; B* = 0; R* = value(s) - * - * 0x02 read register of the COFDM - * VV = register; B* = 0; R* = value(s) - * - * 0x05 write register of the COFDM - * VV = register; B* = value(s); - * - * 0x06 write to the tuner (only for NXT6000) - * VV = 0; B* = PLL data; len = 4; - * - * 0x03 read remote control - * VV = 0; B* = 0; len = 4; R* = key - * - * 0x07 write to the remote (don't know why one should this, resetting ?) - * VV = 0; B* = key; len = 4; - * - * 0x08 write remote type - * VV = 0; B[0] = 0x01, len = 4 - * - * 0x09 write device init - * TODO - */ -#define USB_READ_EEPROM 1 - -#define USB_READ_COFDM 2 -#define USB_WRITE_COFDM 5 - -#define USB_WRITE_TUNER 6 - -#define USB_READ_REMOTE 3 -#define USB_WRITE_REMOTE 7 -#define USB_WRITE_REMOTE_TYPE 8 - -#define USB_DEV_INIT 9 - -#endif diff --git a/drivers/media/dvb/dvb-usb/dtt200u-fe.c b/drivers/media/dvb/dvb-usb/dtt200u-fe.c deleted file mode 100644 index 3d81daa49172..000000000000 --- a/drivers/media/dvb/dvb-usb/dtt200u-fe.c +++ /dev/null @@ -1,210 +0,0 @@ -/* Frontend part of the Linux driver for the WideView/ Yakumo/ Hama/ - * Typhoon/ Yuan DVB-T USB2.0 receiver. - * - * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dtt200u.h" - -struct dtt200u_fe_state { - struct dvb_usb_device *d; - - fe_status_t stat; - - struct dtv_frontend_properties fep; - struct dvb_frontend frontend; -}; - -static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 st = GET_TUNE_STATUS, b[3]; - - dvb_usb_generic_rw(state->d,&st,1,b,3,0); - - switch (b[0]) { - case 0x01: - *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | - FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; - break; - case 0x00: /* pending */ - *stat = FE_TIMEDOUT; /* during set_frontend */ - break; - default: - case 0x02: /* failed */ - *stat = 0; - break; - } - return 0; -} - -static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_VIT_ERR_CNT,b[3]; - dvb_usb_generic_rw(state->d,&bw,1,b,3,0); - *ber = (b[0] << 16) | (b[1] << 8) | b[2]; - return 0; -} - -static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_RS_UNCOR_BLK_CNT,b[2]; - - dvb_usb_generic_rw(state->d,&bw,1,b,2,0); - *unc = (b[0] << 8) | b[1]; - return 0; -} - -static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_AGC, b; - dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); - *strength = (b << 8) | b; - return 0; -} - -static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_SNR,br; - dvb_usb_generic_rw(state->d,&bw,1,&br,1,0); - *snr = ~((br << 8) | br); - return 0; -} - -static int dtt200u_fe_init(struct dvb_frontend* fe) -{ - struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 b = SET_INIT; - return dvb_usb_generic_write(state->d,&b,1); -} - -static int dtt200u_fe_sleep(struct dvb_frontend* fe) -{ - return dtt200u_fe_init(fe); -} - -static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) -{ - tune->min_delay_ms = 1500; - tune->step_size = 0; - tune->max_drift = 0; - return 0; -} - -static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct dtt200u_fe_state *state = fe->demodulator_priv; - int i; - fe_status_t st; - u16 freq = fep->frequency / 250000; - u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; - - switch (fep->bandwidth_hz) { - case 8000000: - bwbuf[1] = 8; - break; - case 7000000: - bwbuf[1] = 7; - break; - case 6000000: - bwbuf[1] = 6; - break; - default: - return -EINVAL; - } - - dvb_usb_generic_write(state->d,bwbuf,2); - - freqbuf[1] = freq & 0xff; - freqbuf[2] = (freq >> 8) & 0xff; - dvb_usb_generic_write(state->d,freqbuf,3); - - for (i = 0; i < 30; i++) { - msleep(20); - dtt200u_fe_read_status(fe, &st); - if (st & FE_TIMEDOUT) - continue; - } - - return 0; -} - -static int dtt200u_fe_get_frontend(struct dvb_frontend* fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct dtt200u_fe_state *state = fe->demodulator_priv; - memcpy(fep, &state->fep, sizeof(struct dtv_frontend_properties)); - return 0; -} - -static void dtt200u_fe_release(struct dvb_frontend* fe) -{ - struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops dtt200u_fe_ops; - -struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d) -{ - struct dtt200u_fe_state* state = NULL; - - /* allocate memory for the internal state */ - state = kzalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL); - if (state == NULL) - goto error; - - deb_info("attaching frontend dtt200u\n"); - - state->d = d; - - memcpy(&state->frontend.ops,&dtt200u_fe_ops,sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = state; - - return &state->frontend; -error: - return NULL; -} - -static struct dvb_frontend_ops dtt200u_fe_ops = { - .delsys = { SYS_DVBT }, - .info = { - .name = "WideView USB DVB-T", - .frequency_min = 44250000, - .frequency_max = 867250000, - .frequency_stepsize = 250000, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_RECOVER | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = dtt200u_fe_release, - - .init = dtt200u_fe_init, - .sleep = dtt200u_fe_sleep, - - .set_frontend = dtt200u_fe_set_frontend, - .get_frontend = dtt200u_fe_get_frontend, - .get_tune_settings = dtt200u_fe_get_tune_settings, - - .read_status = dtt200u_fe_read_status, - .read_ber = dtt200u_fe_read_ber, - .read_signal_strength = dtt200u_fe_read_signal_strength, - .read_snr = dtt200u_fe_read_snr, - .read_ucblocks = dtt200u_fe_read_unc_blocks, -}; diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c deleted file mode 100644 index 66f205c112b2..000000000000 --- a/drivers/media/dvb/dvb-usb/dtt200u.c +++ /dev/null @@ -1,368 +0,0 @@ -/* DVB USB library compliant Linux driver for the WideView/ Yakumo/ Hama/ - * Typhoon/ Yuan/ Miglia DVB-T USB2.0 receiver. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * Thanks to Steve Chang from WideView for providing support for the WT-220U. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dtt200u.h" - -/* debug */ -int dvb_usb_dtt200u_debug; -module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 b = SET_INIT; - - if (onoff) - dvb_usb_generic_write(d,&b,2); - - return 0; -} - -static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - u8 b_streaming[2] = { SET_STREAMING, onoff }; - u8 b_rst_pid = RESET_PID_FILTER; - - dvb_usb_generic_write(adap->dev, b_streaming, 2); - - if (onoff == 0) - dvb_usb_generic_write(adap->dev, &b_rst_pid, 1); - return 0; -} - -static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) -{ - u8 b_pid[4]; - pid = onoff ? pid : 0; - - b_pid[0] = SET_PID_FILTER; - b_pid[1] = index; - b_pid[2] = pid & 0xff; - b_pid[3] = (pid >> 8) & 0x1f; - - return dvb_usb_generic_write(adap->dev, b_pid, 4); -} - -/* remote control */ -/* key list for the tiny remote control (Yakumo, don't know about the others) */ -static struct rc_map_table rc_map_dtt200u_table[] = { - { 0x8001, KEY_MUTE }, - { 0x8002, KEY_CHANNELDOWN }, - { 0x8003, KEY_VOLUMEDOWN }, - { 0x8004, KEY_1 }, - { 0x8005, KEY_2 }, - { 0x8006, KEY_3 }, - { 0x8007, KEY_4 }, - { 0x8008, KEY_5 }, - { 0x8009, KEY_6 }, - { 0x800a, KEY_7 }, - { 0x800c, KEY_ZOOM }, - { 0x800d, KEY_0 }, - { 0x800e, KEY_SELECT }, - { 0x8012, KEY_POWER }, - { 0x801a, KEY_CHANNELUP }, - { 0x801b, KEY_8 }, - { 0x801e, KEY_VOLUMEUP }, - { 0x801f, KEY_9 }, -}; - -static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - u8 key[5],cmd = GET_RC_CODE; - dvb_usb_generic_rw(d,&cmd,1,key,5,0); - dvb_usb_nec_rc_key_to_event(d,key,event,state); - if (key[0] != 0) - deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); - return 0; -} - -static int dtt200u_frontend_attach(struct dvb_usb_adapter *adap) -{ - adap->fe_adap[0].fe = dtt200u_fe_attach(adap->dev); - return 0; -} - -static struct dvb_usb_device_properties dtt200u_properties; -static struct dvb_usb_device_properties wt220u_fc_properties; -static struct dvb_usb_device_properties wt220u_properties; -static struct dvb_usb_device_properties wt220u_zl0353_properties; -static struct dvb_usb_device_properties wt220u_miglia_properties; - -static int dtt200u_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - if (0 == dvb_usb_device_init(intf, &dtt200u_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &wt220u_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, - THIS_MODULE, NULL, adapter_nr)) - return 0; - - return -ENODEV; -} - -static struct usb_device_id dtt200u_usb_table [] = { - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_COLD) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_WARM) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_COLD) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_WARM) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_COLD) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_WARM) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_COLD) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_WARM) }, - { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZAP250_COLD) }, - { USB_DEVICE(USB_VID_MIGLIA, USB_PID_WT220U_ZAP250_COLD) }, - { 0 }, -}; -MODULE_DEVICE_TABLE(usb, dtt200u_usb_table); - -static struct dvb_usb_device_properties dtt200u_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-dtt200u-01.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, - .pid_filter_count = 15, - - .streaming_ctrl = dtt200u_streaming_ctrl, - .pid_filter = dtt200u_pid_filter, - .frontend_attach = dtt200u_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .power_ctrl = dtt200u_power_ctrl, - - .rc.legacy = { - .rc_interval = 300, - .rc_map_table = rc_map_dtt200u_table, - .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), - .rc_query = dtt200u_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { .name = "WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)", - .cold_ids = { &dtt200u_usb_table[0], NULL }, - .warm_ids = { &dtt200u_usb_table[1], NULL }, - }, - { NULL }, - } -}; - -static struct dvb_usb_device_properties wt220u_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-wt220u-02.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, - .pid_filter_count = 15, - - .streaming_ctrl = dtt200u_streaming_ctrl, - .pid_filter = dtt200u_pid_filter, - .frontend_attach = dtt200u_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .power_ctrl = dtt200u_power_ctrl, - - .rc.legacy = { - .rc_interval = 300, - .rc_map_table = rc_map_dtt200u_table, - .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), - .rc_query = dtt200u_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { .name = "WideView WT-220U PenType Receiver (Typhoon/Freecom)", - .cold_ids = { &dtt200u_usb_table[2], &dtt200u_usb_table[8], NULL }, - .warm_ids = { &dtt200u_usb_table[3], NULL }, - }, - { NULL }, - } -}; - -static struct dvb_usb_device_properties wt220u_fc_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-wt220u-fc03.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, - .pid_filter_count = 15, - - .streaming_ctrl = dtt200u_streaming_ctrl, - .pid_filter = dtt200u_pid_filter, - .frontend_attach = dtt200u_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .power_ctrl = dtt200u_power_ctrl, - - .rc.legacy = { - .rc_interval = 300, - .rc_map_table = rc_map_dtt200u_table, - .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), - .rc_query = dtt200u_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { .name = "WideView WT-220U PenType Receiver (Typhoon/Freecom)", - .cold_ids = { &dtt200u_usb_table[6], NULL }, - .warm_ids = { &dtt200u_usb_table[7], NULL }, - }, - { NULL }, - } -}; - -static struct dvb_usb_device_properties wt220u_zl0353_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-wt220u-zl0353-01.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, - .pid_filter_count = 15, - - .streaming_ctrl = dtt200u_streaming_ctrl, - .pid_filter = dtt200u_pid_filter, - .frontend_attach = dtt200u_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .power_ctrl = dtt200u_power_ctrl, - - .rc.legacy = { - .rc_interval = 300, - .rc_map_table = rc_map_dtt200u_table, - .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), - .rc_query = dtt200u_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { .name = "WideView WT-220U PenType Receiver (based on ZL353)", - .cold_ids = { &dtt200u_usb_table[4], NULL }, - .warm_ids = { &dtt200u_usb_table[5], NULL }, - }, - { NULL }, - } -}; - -static struct dvb_usb_device_properties wt220u_miglia_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-wt220u-miglia-01.fw", - - .num_adapters = 1, - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { .name = "WideView WT-220U PenType Receiver (Miglia)", - .cold_ids = { &dtt200u_usb_table[9], NULL }, - /* This device turns into WT220U_ZL0353_WARM when fw - has been uploaded */ - .warm_ids = { NULL }, - }, - { NULL }, - } -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver dtt200u_usb_driver = { - .name = "dvb_usb_dtt200u", - .probe = dtt200u_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = dtt200u_usb_table, -}; - -module_usb_driver(dtt200u_usb_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/dvb/dvb-usb/dtt200u.h deleted file mode 100644 index 005b0a7df358..000000000000 --- a/drivers/media/dvb/dvb-usb/dtt200u.h +++ /dev/null @@ -1,57 +0,0 @@ -/* Common header file of Linux driver for the WideView/ Yakumo/ Hama/ - * Typhoon/ Yuan DVB-T USB2.0 receiver. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_DTT200U_H_ -#define _DVB_USB_DTT200U_H_ - -#define DVB_USB_LOG_PREFIX "dtt200u" - -#include "dvb-usb.h" - -extern int dvb_usb_dtt200u_debug; -#define deb_info(args...) dprintk(dvb_usb_dtt200u_debug,0x01,args) -#define deb_xfer(args...) dprintk(dvb_usb_dtt200u_debug,0x02,args) - -/* guessed protocol description (reverse engineered): - * read - * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 - * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) - */ - -#define GET_SPEED 0x00 -#define GET_TUNE_STATUS 0x81 -#define GET_RC_CODE 0x84 -#define GET_CONFIGURATION 0x88 -#define GET_AGC 0x89 -#define GET_SNR 0x8a -#define GET_VIT_ERR_CNT 0x8c -#define GET_RS_ERR_CNT 0x8d -#define GET_RS_UNCOR_BLK_CNT 0x8e - -/* write - * 01 - init - * 02 - frequency (divided by 250000) - * 03 - bandwidth - * 04 - pid table (index pid(7:0) pid(12:8)) - * 05 - reset the pid table - * 08 - transfer switch - */ - -#define SET_INIT 0x01 -#define SET_RF_FREQ 0x02 -#define SET_BANDWIDTH 0x03 -#define SET_PID_FILTER 0x04 -#define RESET_PID_FILTER 0x05 -#define SET_STREAMING 0x08 - -extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d); - -#endif diff --git a/drivers/media/dvb/dvb-usb/dtv5100.c b/drivers/media/dvb/dvb-usb/dtv5100.c deleted file mode 100644 index 3d11df41cac0..000000000000 --- a/drivers/media/dvb/dvb-usb/dtv5100.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T - * - * Copyright (C) 2008 Antoine Jacquet <royale@zerezo.com> - * http://royale.zerezo.com/dtv5100/ - * - * Inspired by gl861.c and au6610.c drivers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include "dtv5100.h" -#include "zl10353.h" -#include "qt1010.h" - -/* debug */ -static int dvb_usb_dtv5100_debug; -module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u8 request; - u8 type; - u16 value; - u16 index; - - switch (wlen) { - case 1: - /* write { reg }, read { value } */ - request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ : - DTV5100_TUNER_READ); - type = USB_TYPE_VENDOR | USB_DIR_IN; - value = 0; - break; - case 2: - /* write { reg, value } */ - request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE : - DTV5100_TUNER_WRITE); - type = USB_TYPE_VENDOR | USB_DIR_OUT; - value = wbuf[1]; - break; - default: - warn("wlen = %x, aborting.", wlen); - return -EINVAL; - } - index = (addr << 8) + wbuf[0]; - - msleep(1); /* avoid I2C errors */ - return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request, - type, value, index, rbuf, rlen, - DTV5100_USB_TIMEOUT); -} - -/* I2C */ -static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - if (num > 2) - return -EINVAL; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { - if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, msg[i+1].buf, - msg[i+1].len) < 0) - break; - i++; - } else if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, NULL, 0) < 0) - break; - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 dtv5100_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm dtv5100_i2c_algo = { - .master_xfer = dtv5100_i2c_xfer, - .functionality = dtv5100_i2c_func, -}; - -/* Callbacks for DVB USB */ -static struct zl10353_config dtv5100_zl10353_config = { - .demod_address = DTV5100_DEMOD_ADDR, - .no_tuner = 1, - .parallel_ts = 1, -}; - -static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap) -{ - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config, - &adap->dev->i2c_adap); - if (adap->fe_adap[0].fe == NULL) - return -EIO; - - /* disable i2c gate, or it won't work... is this safe? */ - adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL; - - return 0; -} - -static struct qt1010_config dtv5100_qt1010_config = { - .i2c_address = DTV5100_TUNER_ADDR -}; - -static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap) -{ - return dvb_attach(qt1010_attach, - adap->fe_adap[0].fe, &adap->dev->i2c_adap, - &dtv5100_qt1010_config) == NULL ? -ENODEV : 0; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties dtv5100_properties; - -static int dtv5100_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int i, ret; - struct usb_device *udev = interface_to_usbdev(intf); - - /* initialize non qt1010/zl10353 part? */ - for (i = 0; dtv5100_init[i].request; i++) { - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - dtv5100_init[i].request, - USB_TYPE_VENDOR | USB_DIR_OUT, - dtv5100_init[i].value, - dtv5100_init[i].index, NULL, 0, - DTV5100_USB_TIMEOUT); - if (ret) - return ret; - } - - ret = dvb_usb_device_init(intf, &dtv5100_properties, - THIS_MODULE, NULL, adapter_nr); - if (ret) - return ret; - - return 0; -} - -static struct usb_device_id dtv5100_table[] = { - { USB_DEVICE(0x06be, 0xa232) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, dtv5100_table); - -static struct dvb_usb_device_properties dtv5100_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - - .size_of_priv = 0, - - .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - .frontend_attach = dtv5100_frontend_attach, - .tuner_attach = dtv5100_tuner_attach, - - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } }, - - .i2c_algo = &dtv5100_i2c_algo, - - .num_device_descs = 1, - .devices = { - { - .name = "AME DTV-5100 USB2.0 DVB-T", - .cold_ids = { NULL }, - .warm_ids = { &dtv5100_table[0], NULL }, - }, - } -}; - -static struct usb_driver dtv5100_driver = { - .name = "dvb_usb_dtv5100", - .probe = dtv5100_probe, - .disconnect = dvb_usb_device_exit, - .id_table = dtv5100_table, -}; - -module_usb_driver(dtv5100_driver); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dtv5100.h b/drivers/media/dvb/dvb-usb/dtv5100.h deleted file mode 100644 index 93e96e04a82a..000000000000 --- a/drivers/media/dvb/dvb-usb/dtv5100.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T - * - * Copyright (C) 2008 Antoine Jacquet <royale@zerezo.com> - * http://royale.zerezo.com/dtv5100/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _DVB_USB_DTV5100_H_ -#define _DVB_USB_DTV5100_H_ - -#define DVB_USB_LOG_PREFIX "dtv5100" -#include "dvb-usb.h" - -#define DTV5100_USB_TIMEOUT 500 - -#define DTV5100_DEMOD_ADDR 0x00 -#define DTV5100_DEMOD_WRITE 0xc0 -#define DTV5100_DEMOD_READ 0xc1 - -#define DTV5100_TUNER_ADDR 0xc4 -#define DTV5100_TUNER_WRITE 0xc7 -#define DTV5100_TUNER_READ 0xc8 - -#define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" -#define DRIVER_DESC "AME DTV-5100 USB2.0 DVB-T" - -static struct { - u8 request; - u8 value; - u16 index; -} dtv5100_init[] = { - { 0x000000c5, 0x00000000, 0x00000001 }, - { 0x000000c5, 0x00000001, 0x00000001 }, - { } /* Terminating entry */ -}; - -#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/drivers/media/dvb/dvb-usb/dvb-usb-common.h deleted file mode 100644 index 6b7b2a89242e..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb-common.h +++ /dev/null @@ -1,52 +0,0 @@ -/* dvb-usb-common.h is part of the DVB USB library. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * a header file containing prototypes and types for internal use of the dvb-usb-lib - */ -#ifndef _DVB_USB_COMMON_H_ -#define _DVB_USB_COMMON_H_ - -#define DVB_USB_LOG_PREFIX "dvb-usb" -#include "dvb-usb.h" - -extern int dvb_usb_debug; -extern int dvb_usb_disable_rc_polling; - -#define deb_info(args...) dprintk(dvb_usb_debug,0x001,args) -#define deb_xfer(args...) dprintk(dvb_usb_debug,0x002,args) -#define deb_pll(args...) dprintk(dvb_usb_debug,0x004,args) -#define deb_ts(args...) dprintk(dvb_usb_debug,0x008,args) -#define deb_err(args...) dprintk(dvb_usb_debug,0x010,args) -#define deb_rc(args...) dprintk(dvb_usb_debug,0x020,args) -#define deb_fw(args...) dprintk(dvb_usb_debug,0x040,args) -#define deb_mem(args...) dprintk(dvb_usb_debug,0x080,args) -#define deb_uxfer(args...) dprintk(dvb_usb_debug,0x100,args) - -/* commonly used methods */ -extern int dvb_usb_download_firmware(struct usb_device *, struct dvb_usb_device_properties *); - -extern int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff); - -extern int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properties *props); -extern int usb_urb_exit(struct usb_data_stream *stream); -extern int usb_urb_submit(struct usb_data_stream *stream); -extern int usb_urb_kill(struct usb_data_stream *stream); - -extern int dvb_usb_adapter_stream_init(struct dvb_usb_adapter *adap); -extern int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap); - -extern int dvb_usb_i2c_init(struct dvb_usb_device *); -extern int dvb_usb_i2c_exit(struct dvb_usb_device *); - -extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, - short *adapter_nums); -extern int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap); -extern int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap); -extern int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap); - -extern int dvb_usb_remote_init(struct dvb_usb_device *); -extern int dvb_usb_remote_exit(struct dvb_usb_device *); - -#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c deleted file mode 100644 index 719413b15f20..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ /dev/null @@ -1,288 +0,0 @@ -/* dvb-usb-dvb.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for initializing and handling the - * linux-dvb API. - */ -#include "dvb-usb-common.h" - -/* does the complete input transfer handling */ -static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) -{ - struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; - int newfeedcount, ret; - - if (adap == NULL) - return -ENODEV; - - if ((adap->active_fe < 0) || - (adap->active_fe >= adap->num_frontends_initialized)) { - return -EINVAL; - } - - newfeedcount = adap->feedcount + (onoff ? 1 : -1); - - /* stop feed before setting a new pid if there will be no pid anymore */ - if (newfeedcount == 0) { - deb_ts("stop feeding\n"); - usb_urb_kill(&adap->fe_adap[adap->active_fe].stream); - - if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) { - ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 0); - if (ret < 0) { - err("error while stopping stream."); - return ret; - } - } - } - - adap->feedcount = newfeedcount; - - /* activate the pid on the device specific pid_filter */ - deb_ts("setting pid (%s): %5d %04x at index %d '%s'\n", - adap->fe_adap[adap->active_fe].pid_filtering ? - "yes" : "no", dvbdmxfeed->pid, dvbdmxfeed->pid, - dvbdmxfeed->index, onoff ? "on" : "off"); - if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->fe_adap[adap->active_fe].pid_filtering && - adap->props.fe[adap->active_fe].pid_filter != NULL) - adap->props.fe[adap->active_fe].pid_filter(adap, dvbdmxfeed->index, dvbdmxfeed->pid, onoff); - - /* start the feed if this was the first feed and there is still a feed - * for reception. - */ - if (adap->feedcount == onoff && adap->feedcount > 0) { - deb_ts("submitting all URBs\n"); - usb_urb_submit(&adap->fe_adap[adap->active_fe].stream); - - deb_ts("controlling pid parser\n"); - if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->props.fe[adap->active_fe].caps & - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF && - adap->props.fe[adap->active_fe].pid_filter_ctrl != NULL) { - ret = adap->props.fe[adap->active_fe].pid_filter_ctrl(adap, - adap->fe_adap[adap->active_fe].pid_filtering); - if (ret < 0) { - err("could not handle pid_parser"); - return ret; - } - } - deb_ts("start feeding\n"); - if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) { - ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 1); - if (ret < 0) { - err("error while enabling fifo."); - return ret; - } - } - - } - return 0; -} - -static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type); - return dvb_usb_ctrl_feed(dvbdmxfeed,1); -} - -static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type); - return dvb_usb_ctrl_feed(dvbdmxfeed,0); -} - -int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums) -{ - int i; - int ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, - adap->dev->owner, &adap->dev->udev->dev, - adapter_nums); - - if (ret < 0) { - deb_info("dvb_register_adapter failed: error %d", ret); - goto err; - } - adap->dvb_adap.priv = adap; - - if (adap->dev->props.read_mac_address) { - if (adap->dev->props.read_mac_address(adap->dev,adap->dvb_adap.proposed_mac) == 0) - info("MAC address: %pM",adap->dvb_adap.proposed_mac); - else - err("MAC address reading failed."); - } - - - adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; - adap->demux.priv = adap; - - adap->demux.filternum = 0; - for (i = 0; i < adap->props.num_frontends; i++) { - if (adap->demux.filternum < adap->fe_adap[i].max_feed_count) - adap->demux.filternum = adap->fe_adap[i].max_feed_count; - } - adap->demux.feednum = adap->demux.filternum; - adap->demux.start_feed = dvb_usb_start_feed; - adap->demux.stop_feed = dvb_usb_stop_feed; - adap->demux.write_to_decoder = NULL; - if ((ret = dvb_dmx_init(&adap->demux)) < 0) { - err("dvb_dmx_init failed: error %d",ret); - goto err_dmx; - } - - adap->dmxdev.filternum = adap->demux.filternum; - adap->dmxdev.demux = &adap->demux.dmx; - adap->dmxdev.capabilities = 0; - if ((ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap)) < 0) { - err("dvb_dmxdev_init failed: error %d",ret); - goto err_dmx_dev; - } - - if ((ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, - &adap->demux.dmx)) < 0) { - err("dvb_net_init failed: error %d",ret); - goto err_net_init; - } - - adap->state |= DVB_USB_ADAP_STATE_DVB; - return 0; - -err_net_init: - dvb_dmxdev_release(&adap->dmxdev); -err_dmx_dev: - dvb_dmx_release(&adap->demux); -err_dmx: - dvb_unregister_adapter(&adap->dvb_adap); -err: - return ret; -} - -int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap) -{ - if (adap->state & DVB_USB_ADAP_STATE_DVB) { - deb_info("unregistering DVB part\n"); - dvb_net_release(&adap->dvb_net); - adap->demux.dmx.close(&adap->demux.dmx); - dvb_dmxdev_release(&adap->dmxdev); - dvb_dmx_release(&adap->demux); - dvb_unregister_adapter(&adap->dvb_adap); - adap->state &= ~DVB_USB_ADAP_STATE_DVB; - } - return 0; -} - -static int dvb_usb_set_active_fe(struct dvb_frontend *fe, int onoff) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - - int ret = (adap->props.frontend_ctrl) ? - adap->props.frontend_ctrl(fe, onoff) : 0; - - if (ret < 0) { - err("frontend_ctrl request failed"); - return ret; - } - if (onoff) - adap->active_fe = fe->id; - - return 0; -} - -static int dvb_usb_fe_wakeup(struct dvb_frontend *fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - - dvb_usb_device_power_ctrl(adap->dev, 1); - - dvb_usb_set_active_fe(fe, 1); - - if (adap->fe_adap[fe->id].fe_init) - adap->fe_adap[fe->id].fe_init(fe); - - return 0; -} - -static int dvb_usb_fe_sleep(struct dvb_frontend *fe) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - - if (adap->fe_adap[fe->id].fe_sleep) - adap->fe_adap[fe->id].fe_sleep(fe); - - dvb_usb_set_active_fe(fe, 0); - - return dvb_usb_device_power_ctrl(adap->dev, 0); -} - -int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap) -{ - int ret, i; - - /* register all given adapter frontends */ - for (i = 0; i < adap->props.num_frontends; i++) { - - if (adap->props.fe[i].frontend_attach == NULL) { - err("strange: '%s' #%d,%d " - "doesn't want to attach a frontend.", - adap->dev->desc->name, adap->id, i); - - return 0; - } - - ret = adap->props.fe[i].frontend_attach(adap); - if (ret || adap->fe_adap[i].fe == NULL) { - /* only print error when there is no FE at all */ - if (i == 0) - err("no frontend was attached by '%s'", - adap->dev->desc->name); - - return 0; - } - - adap->fe_adap[i].fe->id = i; - - /* re-assign sleep and wakeup functions */ - adap->fe_adap[i].fe_init = adap->fe_adap[i].fe->ops.init; - adap->fe_adap[i].fe->ops.init = dvb_usb_fe_wakeup; - adap->fe_adap[i].fe_sleep = adap->fe_adap[i].fe->ops.sleep; - adap->fe_adap[i].fe->ops.sleep = dvb_usb_fe_sleep; - - if (dvb_register_frontend(&adap->dvb_adap, adap->fe_adap[i].fe)) { - err("Frontend %d registration failed.", i); - dvb_frontend_detach(adap->fe_adap[i].fe); - adap->fe_adap[i].fe = NULL; - /* In error case, do not try register more FEs, - * still leaving already registered FEs alive. */ - if (i == 0) - return -ENODEV; - else - return 0; - } - - /* only attach the tuner if the demod is there */ - if (adap->props.fe[i].tuner_attach != NULL) - adap->props.fe[i].tuner_attach(adap); - - adap->num_frontends_initialized++; - } - - return 0; -} - -int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap) -{ - int i = adap->num_frontends_initialized - 1; - - /* unregister all given adapter frontends */ - for (; i >= 0; i--) { - if (adap->fe_adap[i].fe != NULL) { - dvb_unregister_frontend(adap->fe_adap[i].fe); - dvb_frontend_detach(adap->fe_adap[i].fe); - } - } - adap->num_frontends_initialized = 0; - - return 0; -} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c deleted file mode 100644 index 733a7ff7b207..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ /dev/null @@ -1,146 +0,0 @@ -/* dvb-usb-firmware.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices. - * - * FIXME: This part does actually not belong to dvb-usb, but to the usb-subsystem. - */ -#include "dvb-usb-common.h" - -#include <linux/usb.h> - -struct usb_cypress_controller { - int id; - const char *name; /* name of the usb controller */ - u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */ -}; - -static struct usb_cypress_controller cypress[] = { - { .id = DEVICE_SPECIFIC, .name = "Device specific", .cpu_cs_register = 0 }, - { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 }, - { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 }, - { .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 }, -}; - -/* - * load a firmware packet to the device - */ -static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len) -{ - return usb_control_msg(udev, usb_sndctrlpipe(udev,0), - 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); -} - -int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type) -{ - struct hexline hx; - u8 reset; - int ret,pos=0; - - /* stop the CPU */ - reset = 1; - if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1) - err("could not stop the USB controller CPU."); - - while ((ret = dvb_usb_get_hexline(fw,&hx,&pos)) > 0) { - deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n",hx.addr,hx.len,hx.chk); - ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len); - - if (ret != hx.len) { - err("error while transferring firmware " - "(transferred size: %d, block size: %d)", - ret,hx.len); - ret = -EINVAL; - break; - } - } - if (ret < 0) { - err("firmware download failed at %d with %d",pos,ret); - return ret; - } - - if (ret == 0) { - /* restart the CPU */ - reset = 0; - if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) { - err("could not restart the USB controller CPU."); - ret = -EINVAL; - } - } else - ret = -EIO; - - return ret; -} -EXPORT_SYMBOL(usb_cypress_load_firmware); - -int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_properties *props) -{ - int ret; - const struct firmware *fw = NULL; - - if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) { - err("did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", - props->firmware,ret); - return ret; - } - - info("downloading firmware from file '%s'",props->firmware); - - switch (props->usb_ctrl) { - case CYPRESS_AN2135: - case CYPRESS_AN2235: - case CYPRESS_FX2: - ret = usb_cypress_load_firmware(udev, fw, props->usb_ctrl); - break; - case DEVICE_SPECIFIC: - if (props->download_firmware) - ret = props->download_firmware(udev,fw); - else { - err("BUG: driver didn't specified a download_firmware-callback, although it claims to have a DEVICE_SPECIFIC one."); - ret = -EINVAL; - } - break; - default: - ret = -EINVAL; - break; - } - - release_firmware(fw); - return ret; -} - -int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, - int *pos) -{ - u8 *b = (u8 *) &fw->data[*pos]; - int data_offs = 4; - if (*pos >= fw->size) - return 0; - - memset(hx,0,sizeof(struct hexline)); - - hx->len = b[0]; - - if ((*pos + hx->len + 4) >= fw->size) - return -EINVAL; - - hx->addr = b[1] | (b[2] << 8); - hx->type = b[3]; - - if (hx->type == 0x04) { - /* b[4] and b[5] are the Extended linear address record data field */ - hx->addr |= (b[4] << 24) | (b[5] << 16); -/* hx->len -= 2; - data_offs += 2; */ - } - memcpy(hx->data,&b[data_offs],hx->len); - hx->chk = b[hx->len + data_offs]; - - *pos += hx->len + 5; - - return *pos; -} -EXPORT_SYMBOL(dvb_usb_get_hexline); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c deleted file mode 100644 index 88e4a62abc44..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c +++ /dev/null @@ -1,43 +0,0 @@ -/* dvb-usb-i2c.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for (de-)initializing an I2C adapter. - */ -#include "dvb-usb-common.h" - -int dvb_usb_i2c_init(struct dvb_usb_device *d) -{ - int ret = 0; - - if (!(d->props.caps & DVB_USB_IS_AN_I2C_ADAPTER)) - return 0; - - if (d->props.i2c_algo == NULL) { - err("no i2c algorithm specified"); - return -EINVAL; - } - - strlcpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name)); - d->i2c_adap.algo = d->props.i2c_algo; - d->i2c_adap.algo_data = NULL; - d->i2c_adap.dev.parent = &d->udev->dev; - - i2c_set_adapdata(&d->i2c_adap, d); - - if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0) - err("could not add i2c adapter"); - - d->state |= DVB_USB_STATE_I2C; - - return ret; -} - -int dvb_usb_i2c_exit(struct dvb_usb_device *d) -{ - if (d->state & DVB_USB_STATE_I2C) - i2c_del_adapter(&d->i2c_adap); - d->state &= ~DVB_USB_STATE_I2C; - return 0; -} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c deleted file mode 100644 index 169196ec2d4e..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * DVB USB library - provides a generic interface for a DVB USB device driver. - * - * dvb-usb-init.c - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dvb-usb-common.h" - -/* debug */ -int dvb_usb_debug; -module_param_named(debug, dvb_usb_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256 (or-able))." DVB_USB_DEBUG_STATUS); - -int dvb_usb_disable_rc_polling; -module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644); -MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0)."); - -static int dvb_usb_force_pid_filter_usage; -module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); -MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); - -static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) -{ - struct dvb_usb_adapter *adap; - int ret, n, o; - - for (n = 0; n < d->props.num_adapters; n++) { - adap = &d->adapter[n]; - adap->dev = d; - adap->id = n; - - memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties)); - - for (o = 0; o < adap->props.num_frontends; o++) { - struct dvb_usb_adapter_fe_properties *props = &adap->props.fe[o]; - /* speed - when running at FULL speed we need a HW PID filter */ - if (d->udev->speed == USB_SPEED_FULL && !(props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) { - err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)"); - return -ENODEV; - } - - if ((d->udev->speed == USB_SPEED_FULL && props->caps & DVB_USB_ADAP_HAS_PID_FILTER) || - (props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { - info("will use the device's hardware PID filter (table count: %d).", props->pid_filter_count); - adap->fe_adap[o].pid_filtering = 1; - adap->fe_adap[o].max_feed_count = props->pid_filter_count; - } else { - info("will pass the complete MPEG2 transport stream to the software demuxer."); - adap->fe_adap[o].pid_filtering = 0; - adap->fe_adap[o].max_feed_count = 255; - } - - if (!adap->fe_adap[o].pid_filtering && - dvb_usb_force_pid_filter_usage && - props->caps & DVB_USB_ADAP_HAS_PID_FILTER) { - info("pid filter enabled by module option."); - adap->fe_adap[o].pid_filtering = 1; - adap->fe_adap[o].max_feed_count = props->pid_filter_count; - } - - if (props->size_of_priv > 0) { - adap->fe_adap[o].priv = kzalloc(props->size_of_priv, GFP_KERNEL); - if (adap->fe_adap[o].priv == NULL) { - err("no memory for priv for adapter %d fe %d.", n, o); - return -ENOMEM; - } - } - } - - if (adap->props.size_of_priv > 0) { - adap->priv = kzalloc(adap->props.size_of_priv, GFP_KERNEL); - if (adap->priv == NULL) { - err("no memory for priv for adapter %d.", n); - return -ENOMEM; - } - } - - if ((ret = dvb_usb_adapter_stream_init(adap)) || - (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) || - (ret = dvb_usb_adapter_frontend_init(adap))) { - return ret; - } - - /* use exclusive FE lock if there is multiple shared FEs */ - if (adap->fe_adap[1].fe) - adap->dvb_adap.mfe_shared = 1; - - d->num_adapters_initialized++; - d->state |= DVB_USB_STATE_DVB; - } - - /* - * when reloading the driver w/o replugging the device - * sometimes a timeout occures, this helps - */ - if (d->props.generic_bulk_ctrl_endpoint != 0) { - usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); - usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); - } - - return 0; -} - -static int dvb_usb_adapter_exit(struct dvb_usb_device *d) -{ - int n; - - for (n = 0; n < d->num_adapters_initialized; n++) { - dvb_usb_adapter_frontend_exit(&d->adapter[n]); - dvb_usb_adapter_dvb_exit(&d->adapter[n]); - dvb_usb_adapter_stream_exit(&d->adapter[n]); - kfree(d->adapter[n].priv); - } - d->num_adapters_initialized = 0; - d->state &= ~DVB_USB_STATE_DVB; - return 0; -} - - -/* general initialization functions */ -static int dvb_usb_exit(struct dvb_usb_device *d) -{ - deb_info("state before exiting everything: %x\n", d->state); - dvb_usb_remote_exit(d); - dvb_usb_adapter_exit(d); - dvb_usb_i2c_exit(d); - deb_info("state should be zero now: %x\n", d->state); - d->state = DVB_USB_STATE_INIT; - kfree(d->priv); - kfree(d); - return 0; -} - -static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) -{ - int ret = 0; - - mutex_init(&d->usb_mutex); - mutex_init(&d->i2c_mutex); - - d->state = DVB_USB_STATE_INIT; - - if (d->props.size_of_priv > 0) { - d->priv = kzalloc(d->props.size_of_priv, GFP_KERNEL); - if (d->priv == NULL) { - err("no memory for priv in 'struct dvb_usb_device'"); - return -ENOMEM; - } - } - - /* check the capabilities and set appropriate variables */ - dvb_usb_device_power_ctrl(d, 1); - - if ((ret = dvb_usb_i2c_init(d)) || - (ret = dvb_usb_adapter_init(d, adapter_nums))) { - dvb_usb_exit(d); - return ret; - } - - if ((ret = dvb_usb_remote_init(d))) - err("could not initialize remote control."); - - dvb_usb_device_power_ctrl(d, 0); - - return 0; -} - -/* determine the name and the state of the just found USB device */ -static struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, struct dvb_usb_device_properties *props, int *cold) -{ - int i, j; - struct dvb_usb_device_description *desc = NULL; - - *cold = -1; - - for (i = 0; i < props->num_device_descs; i++) { - - for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) { - deb_info("check for cold %x %x\n", props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct); - if (props->devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && - props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { - *cold = 1; - desc = &props->devices[i]; - break; - } - } - - if (desc != NULL) - break; - - for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) { - deb_info("check for warm %x %x\n", props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct); - if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && - props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { - *cold = 0; - desc = &props->devices[i]; - break; - } - } - } - - if (desc != NULL && props->identify_state != NULL) - props->identify_state(udev, props, &desc, cold); - - return desc; -} - -int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - if (onoff) - d->powered++; - else - d->powered--; - - if (d->powered == 0 || (onoff && d->powered == 1)) { /* when switching from 1 to 0 or from 0 to 1 */ - deb_info("power control: %d\n", onoff); - if (d->props.power_ctrl) - return d->props.power_ctrl(d, onoff); - } - return 0; -} - -/* - * USB - */ -int dvb_usb_device_init(struct usb_interface *intf, - struct dvb_usb_device_properties *props, - struct module *owner, struct dvb_usb_device **du, - short *adapter_nums) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct dvb_usb_device *d = NULL; - struct dvb_usb_device_description *desc = NULL; - - int ret = -ENOMEM, cold = 0; - - if (du != NULL) - *du = NULL; - - if ((desc = dvb_usb_find_device(udev, props, &cold)) == NULL) { - deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n"); - return -ENODEV; - } - - if (cold) { - info("found a '%s' in cold state, will try to load a firmware", desc->name); - ret = dvb_usb_download_firmware(udev, props); - if (!props->no_reconnect || ret != 0) - return ret; - } - - info("found a '%s' in warm state.", desc->name); - d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL); - if (d == NULL) { - err("no memory for 'struct dvb_usb_device'"); - return -ENOMEM; - } - - d->udev = udev; - memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties)); - d->desc = desc; - d->owner = owner; - - usb_set_intfdata(intf, d); - - if (du != NULL) - *du = d; - - ret = dvb_usb_init(d, adapter_nums); - - if (ret == 0) - info("%s successfully initialized and connected.", desc->name); - else - info("%s error while loading driver (%d)", desc->name, ret); - return ret; -} -EXPORT_SYMBOL(dvb_usb_device_init); - -void dvb_usb_device_exit(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - const char *name = "generic DVB-USB module"; - - usb_set_intfdata(intf, NULL); - if (d != NULL && d->desc != NULL) { - name = d->desc->name; - dvb_usb_exit(d); - } - info("%s successfully deinitialized and disconnected.", name); - -} -EXPORT_SYMBOL(dvb_usb_device_exit); - -MODULE_VERSION("1.0"); -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c deleted file mode 100644 index 41bacff24960..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ /dev/null @@ -1,391 +0,0 @@ -/* dvb-usb-remote.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for initializing the input-device and for handling remote-control-queries. - */ -#include "dvb-usb-common.h" -#include <linux/usb/input.h> - -static unsigned int -legacy_dvb_usb_get_keymap_index(const struct input_keymap_entry *ke, - struct rc_map_table *keymap, - unsigned int keymap_size) -{ - unsigned int index; - unsigned int scancode; - - if (ke->flags & INPUT_KEYMAP_BY_INDEX) { - index = ke->index; - } else { - if (input_scancode_to_scalar(ke, &scancode)) - return keymap_size; - - /* See if we can match the raw key code. */ - for (index = 0; index < keymap_size; index++) - if (keymap[index].scancode == scancode) - break; - - /* See if there is an unused hole in the map */ - if (index >= keymap_size) { - for (index = 0; index < keymap_size; index++) { - if (keymap[index].keycode == KEY_RESERVED || - keymap[index].keycode == KEY_UNKNOWN) { - break; - } - } - } - } - - return index; -} - -static int legacy_dvb_usb_getkeycode(struct input_dev *dev, - struct input_keymap_entry *ke) -{ - struct dvb_usb_device *d = input_get_drvdata(dev); - struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; - unsigned int keymap_size = d->props.rc.legacy.rc_map_size; - unsigned int index; - - index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size); - if (index >= keymap_size) - return -EINVAL; - - ke->keycode = keymap[index].keycode; - if (ke->keycode == KEY_UNKNOWN) - ke->keycode = KEY_RESERVED; - ke->len = sizeof(keymap[index].scancode); - memcpy(&ke->scancode, &keymap[index].scancode, ke->len); - ke->index = index; - - return 0; -} - -static int legacy_dvb_usb_setkeycode(struct input_dev *dev, - const struct input_keymap_entry *ke, - unsigned int *old_keycode) -{ - struct dvb_usb_device *d = input_get_drvdata(dev); - struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; - unsigned int keymap_size = d->props.rc.legacy.rc_map_size; - unsigned int index; - - index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size); - /* - * FIXME: Currently, it is not possible to increase the size of - * scancode table. For it to happen, one possibility - * would be to allocate a table with key_map_size + 1, - * copying data, appending the new key on it, and freeing - * the old one - or maybe just allocating some spare space - */ - if (index >= keymap_size) - return -EINVAL; - - *old_keycode = keymap[index].keycode; - keymap->keycode = ke->keycode; - __set_bit(ke->keycode, dev->keybit); - - if (*old_keycode != KEY_RESERVED) { - __clear_bit(*old_keycode, dev->keybit); - for (index = 0; index < keymap_size; index++) { - if (keymap[index].keycode == *old_keycode) { - __set_bit(*old_keycode, dev->keybit); - break; - } - } - } - - return 0; -} - -/* Remote-control poll function - called every dib->rc_query_interval ms to see - * whether the remote control has received anything. - * - * TODO: Fix the repeat rate of the input device. - */ -static void legacy_dvb_usb_read_remote_control(struct work_struct *work) -{ - struct dvb_usb_device *d = - container_of(work, struct dvb_usb_device, rc_query_work.work); - u32 event; - int state; - - /* TODO: need a lock here. We can simply skip checking for the remote control - if we're busy. */ - - /* when the parameter has been set to 1 via sysfs while the driver was running */ - if (dvb_usb_disable_rc_polling) - return; - - if (d->props.rc.legacy.rc_query(d,&event,&state)) { - err("error while querying for an remote control event."); - goto schedule; - } - - - switch (state) { - case REMOTE_NO_KEY_PRESSED: - break; - case REMOTE_KEY_PRESSED: - deb_rc("key pressed\n"); - d->last_event = event; - case REMOTE_KEY_REPEAT: - deb_rc("key repeated\n"); - input_event(d->input_dev, EV_KEY, event, 1); - input_sync(d->input_dev); - input_event(d->input_dev, EV_KEY, d->last_event, 0); - input_sync(d->input_dev); - break; - default: - break; - } - -/* improved repeat handling ??? - switch (state) { - case REMOTE_NO_KEY_PRESSED: - deb_rc("NO KEY PRESSED\n"); - if (d->last_state != REMOTE_NO_KEY_PRESSED) { - deb_rc("releasing event %d\n",d->last_event); - input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); - input_sync(d->rc_input_dev); - } - d->last_state = REMOTE_NO_KEY_PRESSED; - d->last_event = 0; - break; - case REMOTE_KEY_PRESSED: - deb_rc("KEY PRESSED\n"); - deb_rc("pressing event %d\n",event); - - input_event(d->rc_input_dev, EV_KEY, event, 1); - input_sync(d->rc_input_dev); - - d->last_event = event; - d->last_state = REMOTE_KEY_PRESSED; - break; - case REMOTE_KEY_REPEAT: - deb_rc("KEY_REPEAT\n"); - if (d->last_state != REMOTE_NO_KEY_PRESSED) { - deb_rc("repeating event %d\n",d->last_event); - input_event(d->rc_input_dev, EV_KEY, d->last_event, 2); - input_sync(d->rc_input_dev); - d->last_state = REMOTE_KEY_REPEAT; - } - default: - break; - } -*/ - -schedule: - schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval)); -} - -static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d) -{ - int i, err, rc_interval; - struct input_dev *input_dev; - - input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; - - input_dev->evbit[0] = BIT_MASK(EV_KEY); - input_dev->name = "IR-receiver inside an USB DVB receiver"; - input_dev->phys = d->rc_phys; - usb_to_input_id(d->udev, &input_dev->id); - input_dev->dev.parent = &d->udev->dev; - d->input_dev = input_dev; - d->rc_dev = NULL; - - input_dev->getkeycode = legacy_dvb_usb_getkeycode; - input_dev->setkeycode = legacy_dvb_usb_setkeycode; - - /* set the bits for the keys */ - deb_rc("key map size: %d\n", d->props.rc.legacy.rc_map_size); - for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { - deb_rc("setting bit for event %d item %d\n", - d->props.rc.legacy.rc_map_table[i].keycode, i); - set_bit(d->props.rc.legacy.rc_map_table[i].keycode, input_dev->keybit); - } - - /* setting these two values to non-zero, we have to manage key repeats */ - input_dev->rep[REP_PERIOD] = d->props.rc.legacy.rc_interval; - input_dev->rep[REP_DELAY] = d->props.rc.legacy.rc_interval + 150; - - input_set_drvdata(input_dev, d); - - err = input_register_device(input_dev); - if (err) - input_free_device(input_dev); - - rc_interval = d->props.rc.legacy.rc_interval; - - INIT_DELAYED_WORK(&d->rc_query_work, legacy_dvb_usb_read_remote_control); - - info("schedule remote query interval to %d msecs.", rc_interval); - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(rc_interval)); - - d->state |= DVB_USB_STATE_REMOTE; - - return err; -} - -/* Remote-control poll function - called every dib->rc_query_interval ms to see - * whether the remote control has received anything. - * - * TODO: Fix the repeat rate of the input device. - */ -static void dvb_usb_read_remote_control(struct work_struct *work) -{ - struct dvb_usb_device *d = - container_of(work, struct dvb_usb_device, rc_query_work.work); - int err; - - /* TODO: need a lock here. We can simply skip checking for the remote control - if we're busy. */ - - /* when the parameter has been set to 1 via sysfs while the - * driver was running, or when bulk mode is enabled after IR init - */ - if (dvb_usb_disable_rc_polling || d->props.rc.core.bulk_mode) - return; - - err = d->props.rc.core.rc_query(d); - if (err) - err("error %d while querying for an remote control event.", err); - - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(d->props.rc.core.rc_interval)); -} - -static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d) -{ - int err, rc_interval; - struct rc_dev *dev; - - dev = rc_allocate_device(); - if (!dev) - return -ENOMEM; - - dev->driver_name = d->props.rc.core.module_name; - dev->map_name = d->props.rc.core.rc_codes; - dev->change_protocol = d->props.rc.core.change_protocol; - dev->allowed_protos = d->props.rc.core.allowed_protos; - dev->driver_type = d->props.rc.core.driver_type; - usb_to_input_id(d->udev, &dev->input_id); - dev->input_name = "IR-receiver inside an USB DVB receiver"; - dev->input_phys = d->rc_phys; - dev->dev.parent = &d->udev->dev; - dev->priv = d; - - err = rc_register_device(dev); - if (err < 0) { - rc_free_device(dev); - return err; - } - - d->input_dev = NULL; - d->rc_dev = dev; - - if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode) - return 0; - - /* Polling mode - initialize a work queue for handling it */ - INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control); - - rc_interval = d->props.rc.core.rc_interval; - - info("schedule remote query interval to %d msecs.", rc_interval); - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(rc_interval)); - - return 0; -} - -int dvb_usb_remote_init(struct dvb_usb_device *d) -{ - int err; - - if (dvb_usb_disable_rc_polling) - return 0; - - if (d->props.rc.legacy.rc_map_table && d->props.rc.legacy.rc_query) - d->props.rc.mode = DVB_RC_LEGACY; - else if (d->props.rc.core.rc_codes) - d->props.rc.mode = DVB_RC_CORE; - else - return 0; - - usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); - strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); - - /* Start the remote-control polling. */ - if (d->props.rc.legacy.rc_interval < 40) - d->props.rc.legacy.rc_interval = 100; /* default */ - - if (d->props.rc.mode == DVB_RC_LEGACY) - err = legacy_dvb_usb_remote_init(d); - else - err = rc_core_dvb_usb_remote_init(d); - if (err) - return err; - - d->state |= DVB_USB_STATE_REMOTE; - - return 0; -} - -int dvb_usb_remote_exit(struct dvb_usb_device *d) -{ - if (d->state & DVB_USB_STATE_REMOTE) { - cancel_delayed_work_sync(&d->rc_query_work); - if (d->props.rc.mode == DVB_RC_LEGACY) - input_unregister_device(d->input_dev); - else - rc_unregister_device(d->rc_dev); - } - d->state &= ~DVB_USB_STATE_REMOTE; - return 0; -} - -#define DVB_USB_RC_NEC_EMPTY 0x00 -#define DVB_USB_RC_NEC_KEY_PRESSED 0x01 -#define DVB_USB_RC_NEC_KEY_REPEATED 0x02 -int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, - u8 keybuf[5], u32 *event, int *state) -{ - int i; - struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; - *event = 0; - *state = REMOTE_NO_KEY_PRESSED; - switch (keybuf[0]) { - case DVB_USB_RC_NEC_EMPTY: - break; - case DVB_USB_RC_NEC_KEY_PRESSED: - if ((u8) ~keybuf[1] != keybuf[2] || - (u8) ~keybuf[3] != keybuf[4]) { - deb_err("remote control checksum failed.\n"); - break; - } - /* See if we can match the raw key code. */ - for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) - if (rc5_custom(&keymap[i]) == keybuf[1] && - rc5_data(&keymap[i]) == keybuf[3]) { - *event = keymap[i].keycode; - *state = REMOTE_KEY_PRESSED; - return 0; - } - deb_err("key mapping failed - no appropriate key found in keymapping\n"); - break; - case DVB_USB_RC_NEC_KEY_REPEATED: - *state = REMOTE_KEY_REPEAT; - break; - default: - deb_err("unknown type of remote status: %d\n",keybuf[0]); - break; - } - return 0; -} -EXPORT_SYMBOL(dvb_usb_nec_rc_key_to_event); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c deleted file mode 100644 index 5c8f651344fc..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c +++ /dev/null @@ -1,121 +0,0 @@ -/* dvb-usb-urb.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file keeps functions for initializing and handling the - * USB and URB stuff. - */ -#include "dvb-usb-common.h" - -int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, - u16 rlen, int delay_ms) -{ - int actlen,ret = -ENOMEM; - - if (!d || wbuf == NULL || wlen == 0) - return -EINVAL; - - if (d->props.generic_bulk_ctrl_endpoint == 0) { - err("endpoint for generic control not specified."); - return -EINVAL; - } - - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) - return ret; - - deb_xfer(">>> "); - debug_dump(wbuf,wlen,deb_xfer); - - ret = usb_bulk_msg(d->udev,usb_sndbulkpipe(d->udev, - d->props.generic_bulk_ctrl_endpoint), wbuf,wlen,&actlen, - 2000); - - if (ret) - err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); - else - ret = actlen != wlen ? -1 : 0; - - /* an answer is expected, and no error before */ - if (!ret && rbuf && rlen) { - if (delay_ms) - msleep(delay_ms); - - ret = usb_bulk_msg(d->udev,usb_rcvbulkpipe(d->udev, - d->props.generic_bulk_ctrl_endpoint_response ? - d->props.generic_bulk_ctrl_endpoint_response : - d->props.generic_bulk_ctrl_endpoint),rbuf,rlen,&actlen, - 2000); - - if (ret) - err("recv bulk message failed: %d",ret); - else { - deb_xfer("<<< "); - debug_dump(rbuf,actlen,deb_xfer); - } - } - - mutex_unlock(&d->usb_mutex); - return ret; -} -EXPORT_SYMBOL(dvb_usb_generic_rw); - -int dvb_usb_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) -{ - return dvb_usb_generic_rw(d,buf,len,NULL,0,0); -} -EXPORT_SYMBOL(dvb_usb_generic_write); - -static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buffer, size_t length) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB) - dvb_dmx_swfilter(&adap->demux, buffer, length); -} - -static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buffer, size_t length) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB) - dvb_dmx_swfilter_204(&adap->demux, buffer, length); -} - -static void dvb_usb_data_complete_raw(struct usb_data_stream *stream, - u8 *buffer, size_t length) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB) - dvb_dmx_swfilter_raw(&adap->demux, buffer, length); -} - -int dvb_usb_adapter_stream_init(struct dvb_usb_adapter *adap) -{ - int i, ret = 0; - for (i = 0; i < adap->props.num_frontends; i++) { - - adap->fe_adap[i].stream.udev = adap->dev->udev; - if (adap->props.fe[i].caps & DVB_USB_ADAP_RECEIVES_204_BYTE_TS) - adap->fe_adap[i].stream.complete = - dvb_usb_data_complete_204; - else - if (adap->props.fe[i].caps & DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD) - adap->fe_adap[i].stream.complete = - dvb_usb_data_complete_raw; - else - adap->fe_adap[i].stream.complete = dvb_usb_data_complete; - adap->fe_adap[i].stream.user_priv = adap; - ret = usb_urb_init(&adap->fe_adap[i].stream, - &adap->props.fe[i].stream); - if (ret < 0) - break; - } - return ret; -} - -int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap) -{ - int i; - for (i = 0; i < adap->props.num_frontends; i++) - usb_urb_exit(&adap->fe_adap[i].stream); - return 0; -} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h deleted file mode 100644 index aab0f99bc892..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ /dev/null @@ -1,483 +0,0 @@ -/* dvb-usb.h is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * the headerfile, all dvb-usb-drivers have to include. - * - * TODO: clean-up the structures for unused fields and update the comments - */ -#ifndef __DVB_USB_H__ -#define __DVB_USB_H__ - -#include <linux/input.h> -#include <linux/usb.h> -#include <linux/firmware.h> -#include <linux/mutex.h> -#include <media/rc-core.h> - -#include "dvb_frontend.h" -#include "dvb_demux.h" -#include "dvb_net.h" -#include "dmxdev.h" - -#include "dvb-pll.h" - -#include "dvb-usb-ids.h" - -/* debug */ -#ifdef CONFIG_DVB_USB_DEBUG -#define dprintk(var,level,args...) \ - do { if ((var & level)) { printk(args); } } while (0) - -#define debug_dump(b,l,func) {\ - int loop_; \ - for (loop_ = 0; loop_ < l; loop_++) func("%02x ", b[loop_]); \ - func("\n");\ -} -#define DVB_USB_DEBUG_STATUS -#else -#define dprintk(args...) -#define debug_dump(b,l,func) - -#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" - -#endif - -/* generic log methods - taken from usb.h */ -#ifndef DVB_USB_LOG_PREFIX - #define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)" -#endif - -#undef err -#define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) -#undef info -#define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) -#undef warn -#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) - -/** - * struct dvb_usb_device_description - name and its according USB IDs - * @name: real name of the box, regardless which DVB USB device class is in use - * @cold_ids: array of struct usb_device_id which describe the device in - * pre-firmware state - * @warm_ids: array of struct usb_device_id which describe the device in - * post-firmware state - * - * Each DVB USB device class can have one or more actual devices, this struct - * assigns a name to it. - */ -struct dvb_usb_device_description { - const char *name; - -#define DVB_USB_ID_MAX_NUM 15 - struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM]; - struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM]; -}; - -static inline u8 rc5_custom(struct rc_map_table *key) -{ - return (key->scancode >> 8) & 0xff; -} - -static inline u8 rc5_data(struct rc_map_table *key) -{ - return key->scancode & 0xff; -} - -static inline u16 rc5_scan(struct rc_map_table *key) -{ - return key->scancode & 0xffff; -} - -struct dvb_usb_device; -struct dvb_usb_adapter; -struct usb_data_stream; - -/** - * Properties of USB streaming - TODO this structure should be somewhere else - * describes the kind of USB transfer used for data-streaming. - * (BULK or ISOC) - */ -struct usb_data_stream_properties { -#define USB_BULK 1 -#define USB_ISOC 2 - int type; - int count; - int endpoint; - - union { - struct { - int buffersize; /* per URB */ - } bulk; - struct { - int framesperurb; - int framesize; - int interval; - } isoc; - } u; -}; - -/** - * struct dvb_usb_adapter_properties - properties of a dvb-usb-adapter. - * A DVB-USB-Adapter is basically a dvb_adapter which is present on a USB-device. - * @caps: capabilities of the DVB USB device. - * @pid_filter_count: number of PID filter position in the optional hardware - * PID-filter. - * @num_frontends: number of frontends of the DVB USB adapter. - * @frontend_ctrl: called to power on/off active frontend. - * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the - * device (not URB submitting/killing). - * @pid_filter_ctrl: called to en/disable the PID filter, if any. - * @pid_filter: called to set/unset a PID for filtering. - * @frontend_attach: called to attach the possible frontends (fill fe-field - * of struct dvb_usb_device). - * @tuner_attach: called to attach the correct tuner and to fill pll_addr, - * pll_desc and pll_init_buf of struct dvb_usb_device). - * @stream: configuration of the USB streaming - */ -struct dvb_usb_adapter_fe_properties { -#define DVB_USB_ADAP_HAS_PID_FILTER 0x01 -#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02 -#define DVB_USB_ADAP_NEED_PID_FILTERING 0x04 -#define DVB_USB_ADAP_RECEIVES_204_BYTE_TS 0x08 -#define DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD 0x10 - int caps; - int pid_filter_count; - - int (*streaming_ctrl) (struct dvb_usb_adapter *, int); - int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int); - int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int); - - int (*frontend_attach) (struct dvb_usb_adapter *); - int (*tuner_attach) (struct dvb_usb_adapter *); - - struct usb_data_stream_properties stream; - - int size_of_priv; -}; - -#define MAX_NO_OF_FE_PER_ADAP 3 -struct dvb_usb_adapter_properties { - int size_of_priv; - - int (*frontend_ctrl) (struct dvb_frontend *, int); - - int num_frontends; - struct dvb_usb_adapter_fe_properties fe[MAX_NO_OF_FE_PER_ADAP]; -}; - -/** - * struct dvb_rc_legacy - old properties of remote controller - * @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable - * remote control handling). - * @rc_map_size: number of items in @rc_map_table. - * @rc_query: called to query an event event. - * @rc_interval: time in ms between two queries. - */ -struct dvb_rc_legacy { -/* remote control properties */ -#define REMOTE_NO_KEY_PRESSED 0x00 -#define REMOTE_KEY_PRESSED 0x01 -#define REMOTE_KEY_REPEAT 0x02 - struct rc_map_table *rc_map_table; - int rc_map_size; - int (*rc_query) (struct dvb_usb_device *, u32 *, int *); - int rc_interval; -}; - -/** - * struct dvb_rc properties of remote controller, using rc-core - * @rc_codes: name of rc codes table - * @protocol: type of protocol(s) currently used by the driver - * @allowed_protos: protocol(s) supported by the driver - * @driver_type: Used to point if a device supports raw mode - * @change_protocol: callback to change protocol - * @rc_query: called to query an event event. - * @rc_interval: time in ms between two queries. - * @bulk_mode: device supports bulk mode for RC (disable polling mode) - */ -struct dvb_rc { - char *rc_codes; - u64 protocol; - u64 allowed_protos; - enum rc_driver_type driver_type; - int (*change_protocol)(struct rc_dev *dev, u64 rc_type); - char *module_name; - int (*rc_query) (struct dvb_usb_device *d); - int rc_interval; - bool bulk_mode; /* uses bulk mode */ -}; - -/** - * enum dvb_usb_mode - Specifies if it is using a legacy driver or a new one - * based on rc-core - * This is initialized/used only inside dvb-usb-remote.c. - * It shouldn't be set by the drivers. - */ -enum dvb_usb_mode { - DVB_RC_LEGACY, - DVB_RC_CORE, -}; - -/** - * struct dvb_usb_device_properties - properties of a dvb-usb-device - * @usb_ctrl: which USB device-side controller is in use. Needed for firmware - * download. - * @firmware: name of the firmware file. - * @download_firmware: called to download the firmware when the usb_ctrl is - * DEVICE_SPECIFIC. - * @no_reconnect: device doesn't do a reconnect after downloading the firmware, - * so do the warm initialization right after it - * - * @size_of_priv: how many bytes shall be allocated for the private field - * of struct dvb_usb_device. - * - * @power_ctrl: called to enable/disable power of the device. - * @read_mac_address: called to read the MAC address of the device. - * @identify_state: called to determine the state (cold or warm), when it - * is not distinguishable by the USB IDs. - * - * @rc: remote controller properties - * - * @i2c_algo: i2c_algorithm if the device has I2CoverUSB. - * - * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic - * endpoint which received control messages with bulk transfers. When this - * is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write- - * helper functions. - * - * @generic_bulk_ctrl_endpoint_response: some DVB USB devices use a separate - * endpoint for responses to control messages sent with bulk transfers via - * the generic_bulk_ctrl_endpoint. When this is non-zero, this will be used - * instead of the generic_bulk_ctrl_endpoint when reading usb responses in - * the dvb_usb_generic_rw helper function. - * - * @num_device_descs: number of struct dvb_usb_device_description in @devices - * @devices: array of struct dvb_usb_device_description compatibles with these - * properties. - */ -#define MAX_NO_OF_ADAPTER_PER_DEVICE 2 -struct dvb_usb_device_properties { - -#define DVB_USB_IS_AN_I2C_ADAPTER 0x01 - int caps; - -#define DEVICE_SPECIFIC 0 -#define CYPRESS_AN2135 1 -#define CYPRESS_AN2235 2 -#define CYPRESS_FX2 3 - int usb_ctrl; - int (*download_firmware) (struct usb_device *, const struct firmware *); - const char *firmware; - int no_reconnect; - - int size_of_priv; - - int num_adapters; - struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; - - int (*power_ctrl) (struct dvb_usb_device *, int); - int (*read_mac_address) (struct dvb_usb_device *, u8 []); - int (*identify_state) (struct usb_device *, struct dvb_usb_device_properties *, - struct dvb_usb_device_description **, int *); - - struct { - enum dvb_usb_mode mode; /* Drivers shouldn't touch on it */ - struct dvb_rc_legacy legacy; - struct dvb_rc core; - } rc; - - struct i2c_algorithm *i2c_algo; - - int generic_bulk_ctrl_endpoint; - int generic_bulk_ctrl_endpoint_response; - - int num_device_descs; - struct dvb_usb_device_description devices[12]; -}; - -/** - * struct usb_data_stream - generic object of an USB stream - * @buf_num: number of buffer allocated. - * @buf_size: size of each buffer in buf_list. - * @buf_list: array containing all allocate buffers for streaming. - * @dma_addr: list of dma_addr_t for each buffer in buf_list. - * - * @urbs_initialized: number of URBs initialized. - * @urbs_submitted: number of URBs submitted. - */ -#define MAX_NO_URBS_FOR_DATA_STREAM 10 -struct usb_data_stream { - struct usb_device *udev; - struct usb_data_stream_properties props; - -#define USB_STATE_INIT 0x00 -#define USB_STATE_URB_BUF 0x01 - int state; - - void (*complete) (struct usb_data_stream *, u8 *, size_t); - - struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM]; - int buf_num; - unsigned long buf_size; - u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM]; - dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM]; - - int urbs_initialized; - int urbs_submitted; - - void *user_priv; -}; - -/** - * struct dvb_usb_adapter - a DVB adapter on a USB device - * @id: index of this adapter (starting with 0). - * - * @feedcount: number of reqested feeds (used for streaming-activation) - * @pid_filtering: is hardware pid_filtering used or not. - * - * @pll_addr: I2C address of the tuner for programming - * @pll_init: array containing the initialization buffer - * @pll_desc: pointer to the appropriate struct dvb_pll_desc - * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or the board - * - * @dvb_adap: device's dvb_adapter. - * @dmxdev: device's dmxdev. - * @demux: device's software demuxer. - * @dvb_net: device's dvb_net interfaces. - * @dvb_frontend: device's frontend. - * @max_feed_count: how many feeds can be handled simultaneously by this - * device - * - * @fe_init: rerouted frontend-init (wakeup) function. - * @fe_sleep: rerouted frontend-sleep function. - * - * @stream: the usb data stream. - */ -struct dvb_usb_fe_adapter { - struct dvb_frontend *fe; - - int (*fe_init) (struct dvb_frontend *); - int (*fe_sleep) (struct dvb_frontend *); - - struct usb_data_stream stream; - - int pid_filtering; - int max_feed_count; - - void *priv; -}; - -struct dvb_usb_adapter { - struct dvb_usb_device *dev; - struct dvb_usb_adapter_properties props; - -#define DVB_USB_ADAP_STATE_INIT 0x000 -#define DVB_USB_ADAP_STATE_DVB 0x001 - int state; - - u8 id; - - int feedcount; - - /* dvb */ - struct dvb_adapter dvb_adap; - struct dmxdev dmxdev; - struct dvb_demux demux; - struct dvb_net dvb_net; - - struct dvb_usb_fe_adapter fe_adap[MAX_NO_OF_FE_PER_ADAP]; - int active_fe; - int num_frontends_initialized; - - void *priv; -}; - -/** - * struct dvb_usb_device - object of a DVB USB device - * @props: copy of the struct dvb_usb_properties this device belongs to. - * @desc: pointer to the device's struct dvb_usb_device_description. - * @state: initialization and runtime state of the device. - * - * @powered: indicated whether the device is power or not. - * Powered is in/decremented for each call to modify the state. - * @udev: pointer to the device's struct usb_device. - * - * @usb_mutex: semaphore of USB control messages (reading needs two messages) - * @i2c_mutex: semaphore for i2c-transfers - * - * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB - * - * @rc_dev: rc device for the remote control (rc-core mode) - * @input_dev: input device for the remote control (legacy mode) - * @rc_query_work: struct work_struct frequent rc queries - * @last_event: last triggered event - * @last_state: last state (no, pressed, repeat) - * @owner: owner of the dvb_adapter - * @priv: private data of the actual driver (allocate by dvb-usb, size defined - * in size_of_priv of dvb_usb_properties). - */ -struct dvb_usb_device { - struct dvb_usb_device_properties props; - struct dvb_usb_device_description *desc; - - struct usb_device *udev; - -#define DVB_USB_STATE_INIT 0x000 -#define DVB_USB_STATE_I2C 0x001 -#define DVB_USB_STATE_DVB 0x002 -#define DVB_USB_STATE_REMOTE 0x004 - int state; - - int powered; - - /* locking */ - struct mutex usb_mutex; - - /* i2c */ - struct mutex i2c_mutex; - struct i2c_adapter i2c_adap; - - int num_adapters_initialized; - struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; - - /* remote control */ - struct rc_dev *rc_dev; - struct input_dev *input_dev; - char rc_phys[64]; - struct delayed_work rc_query_work; - u32 last_event; - int last_state; - - struct module *owner; - - void *priv; -}; - -extern int dvb_usb_device_init(struct usb_interface *, - struct dvb_usb_device_properties *, - struct module *, struct dvb_usb_device **, - short *adapter_nums); -extern void dvb_usb_device_exit(struct usb_interface *); - -/* the generic read/write method for device control */ -extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int); -extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16); - -/* commonly used remote control parsing */ -extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *); - -/* commonly used firmware download types and function */ -struct hexline { - u8 len; - u32 addr; - u8 type; - u8 data[255]; - u8 chk; -}; -extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type); -extern int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos); - - -#endif diff --git a/drivers/media/dvb/dvb-usb/dvb_usb_dvb.c b/drivers/media/dvb/dvb-usb/dvb_usb_dvb.c deleted file mode 100644 index 384fe8eec21f..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb_usb_dvb.c +++ /dev/null @@ -1,403 +0,0 @@ -/* dvb-usb-dvb.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for initializing and handling the - * linux-dvb API. - */ -#include "dvb_usb_common.h" - -static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buf, - size_t len) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - dvb_dmx_swfilter(&adap->demux, buf, len); -} - -static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buf, - size_t len) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - dvb_dmx_swfilter_204(&adap->demux, buf, len); -} - -static void dvb_usb_data_complete_raw(struct usb_data_stream *stream, u8 *buf, - size_t len) -{ - struct dvb_usb_adapter *adap = stream->user_priv; - dvb_dmx_swfilter_raw(&adap->demux, buf, len); -} - -int dvb_usbv2_adapter_stream_init(struct dvb_usb_adapter *adap) -{ - pr_debug("%s: adap=%d\n", __func__, adap->id); - - adap->stream.udev = adap_to_d(adap)->udev; - adap->stream.user_priv = adap; - adap->stream.complete = dvb_usb_data_complete; - - return usb_urb_initv2(&adap->stream, &adap->props->stream); -} - -int dvb_usbv2_adapter_stream_exit(struct dvb_usb_adapter *adap) -{ - pr_debug("%s: adap=%d\n", __func__, adap->id); - usb_urb_exitv2(&adap->stream); - - return 0; -} - -/* does the complete input transfer handling */ -static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int count) -{ - struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; - struct dvb_usb_device *d = adap_to_d(adap); - int ret; - pr_debug("%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: " \ - "%04x (%04d) at index %d '%s'\n", __func__, adap->id, - adap->active_fe, dvbdmxfeed->type, - adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid, - dvbdmxfeed->pid, dvbdmxfeed->index, - (count == 1) ? "on" : "off"); - - if (adap->active_fe == -1) - return -EINVAL; - - adap->feed_count += count; - - /* stop feeding if it is last pid */ - if (adap->feed_count == 0) { - pr_debug("%s: stop feeding\n", __func__); - usb_urb_killv2(&adap->stream); - - if (d->props->streaming_ctrl) { - ret = d->props->streaming_ctrl(adap, 0); - if (ret < 0) { - pr_err("%s: streaming_ctrl() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_mutex_unlock; - } - } - mutex_unlock(&adap->sync_mutex); - } - - /* activate the pid on the device pid filter */ - if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->pid_filtering && - adap->props->pid_filter) - ret = adap->props->pid_filter(adap, dvbdmxfeed->index, - dvbdmxfeed->pid, (count == 1) ? 1 : 0); - if (ret < 0) - pr_err("%s: pid_filter() failed=%d\n", - KBUILD_MODNAME, ret); - - /* start feeding if it is first pid */ - if (adap->feed_count == 1 && count == 1) { - struct usb_data_stream_properties stream_props; - mutex_lock(&adap->sync_mutex); - pr_debug("%s: start feeding\n", __func__); - - /* resolve input and output streaming paramters */ - if (d->props->get_stream_config) { - memcpy(&stream_props, &adap->props->stream, - sizeof(struct usb_data_stream_properties)); - ret = d->props->get_stream_config( - adap->fe[adap->active_fe], - &adap->ts_type, &stream_props); - if (ret < 0) - goto err_mutex_unlock; - } else { - stream_props = adap->props->stream; - } - - switch (adap->ts_type) { - case DVB_USB_FE_TS_TYPE_204: - adap->stream.complete = dvb_usb_data_complete_204; - break; - case DVB_USB_FE_TS_TYPE_RAW: - adap->stream.complete = dvb_usb_data_complete_raw; - break; - case DVB_USB_FE_TS_TYPE_188: - default: - adap->stream.complete = dvb_usb_data_complete; - break; - } - - usb_urb_submitv2(&adap->stream, &stream_props); - - if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->props->caps & - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF && - adap->props->pid_filter_ctrl) { - ret = adap->props->pid_filter_ctrl(adap, - adap->pid_filtering); - if (ret < 0) { - pr_err("%s: pid_filter_ctrl() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_mutex_unlock; - } - } - - if (d->props->streaming_ctrl) { - ret = d->props->streaming_ctrl(adap, 1); - if (ret < 0) { - pr_err("%s: streaming_ctrl() failed=%d\n", - KBUILD_MODNAME, ret); - goto err_mutex_unlock; - } - } - } - - return 0; -err_mutex_unlock: - mutex_unlock(&adap->sync_mutex); - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - return dvb_usb_ctrl_feed(dvbdmxfeed, 1); -} - -static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - return dvb_usb_ctrl_feed(dvbdmxfeed, -1); -} - -int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap) -{ - int ret; - struct dvb_usb_device *d = adap_to_d(adap); - pr_debug("%s: adap=%d\n", __func__, adap->id); - - ret = dvb_register_adapter(&adap->dvb_adap, d->name, d->props->owner, - &d->udev->dev, d->props->adapter_nr); - if (ret < 0) { - pr_debug("%s: dvb_register_adapter() failed=%d\n", __func__, - ret); - goto err; - } - - adap->dvb_adap.priv = adap; - - if (d->props->read_mac_address) { - ret = d->props->read_mac_address(adap, - adap->dvb_adap.proposed_mac); - if (ret < 0) - goto err_dmx; - - pr_info("%s: MAC address: %pM\n", KBUILD_MODNAME, - adap->dvb_adap.proposed_mac); - } - - adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; - adap->demux.priv = adap; - adap->demux.filternum = 0; - if (adap->demux.filternum < adap->max_feed_count) - adap->demux.filternum = adap->max_feed_count; - adap->demux.feednum = adap->demux.filternum; - adap->demux.start_feed = dvb_usb_start_feed; - adap->demux.stop_feed = dvb_usb_stop_feed; - adap->demux.write_to_decoder = NULL; - ret = dvb_dmx_init(&adap->demux); - if (ret < 0) { - pr_err("%s: dvb_dmx_init() failed=%d\n", KBUILD_MODNAME, ret); - goto err_dmx; - } - - adap->dmxdev.filternum = adap->demux.filternum; - adap->dmxdev.demux = &adap->demux.dmx; - adap->dmxdev.capabilities = 0; - ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap); - if (ret < 0) { - pr_err("%s: dvb_dmxdev_init() failed=%d\n", KBUILD_MODNAME, - ret); - goto err_dmx_dev; - } - - ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, &adap->demux.dmx); - if (ret < 0) { - pr_err("%s: dvb_net_init() failed=%d\n", KBUILD_MODNAME, ret); - goto err_net_init; - } - - mutex_init(&adap->sync_mutex); - - return 0; -err_net_init: - dvb_dmxdev_release(&adap->dmxdev); -err_dmx_dev: - dvb_dmx_release(&adap->demux); -err_dmx: - dvb_unregister_adapter(&adap->dvb_adap); -err: - adap->dvb_adap.priv = NULL; - return ret; -} - -int dvb_usbv2_adapter_dvb_exit(struct dvb_usb_adapter *adap) -{ - pr_debug("%s: adap=%d\n", __func__, adap->id); - - if (adap->dvb_adap.priv) { - dvb_net_release(&adap->dvb_net); - adap->demux.dmx.close(&adap->demux.dmx); - dvb_dmxdev_release(&adap->dmxdev); - dvb_dmx_release(&adap->demux); - dvb_unregister_adapter(&adap->dvb_adap); - } - - return 0; -} - -static int dvb_usb_fe_wakeup(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap_to_d(adap); - mutex_lock(&adap->sync_mutex); - pr_debug("%s: adap=%d fe=%d\n", __func__, adap->id, fe->id); - - ret = dvb_usbv2_device_power_ctrl(d, 1); - if (ret < 0) - goto err; - - if (d->props->frontend_ctrl) { - ret = d->props->frontend_ctrl(fe, 1); - if (ret < 0) - goto err; - } - - if (adap->fe_init[fe->id]) { - ret = adap->fe_init[fe->id](fe); - if (ret < 0) - goto err; - } - - adap->active_fe = fe->id; - mutex_unlock(&adap->sync_mutex); - - return 0; -err: - mutex_unlock(&adap->sync_mutex); - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -static int dvb_usb_fe_sleep(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct dvb_usb_device *d = adap_to_d(adap); - mutex_lock(&adap->sync_mutex); - pr_debug("%s: adap=%d fe=%d\n", __func__, adap->id, fe->id); - - if (adap->fe_sleep[fe->id]) { - ret = adap->fe_sleep[fe->id](fe); - if (ret < 0) - goto err; - } - - if (d->props->frontend_ctrl) { - ret = d->props->frontend_ctrl(fe, 0); - if (ret < 0) - goto err; - } - - ret = dvb_usbv2_device_power_ctrl(d, 0); - if (ret < 0) - goto err; - - adap->active_fe = -1; - mutex_unlock(&adap->sync_mutex); - - return 0; -err: - mutex_unlock(&adap->sync_mutex); - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap) -{ - int ret, i, count_registered = 0; - struct dvb_usb_device *d = adap_to_d(adap); - pr_debug("%s: adap=%d\n", __func__, adap->id); - - memset(adap->fe, 0, sizeof(adap->fe)); - adap->active_fe = -1; - - if (d->props->frontend_attach) { - ret = d->props->frontend_attach(adap); - if (ret < 0) { - pr_debug("%s: frontend_attach() failed=%d\n", __func__, - ret); - goto err_dvb_frontend_detach; - } - } else { - pr_debug("%s: frontend_attach() do not exists\n", __func__); - ret = 0; - goto err; - } - - for (i = 0; i < MAX_NO_OF_FE_PER_ADAP && adap->fe[i]; i++) { - adap->fe[i]->id = i; - - /* re-assign sleep and wakeup functions */ - adap->fe_init[i] = adap->fe[i]->ops.init; - adap->fe[i]->ops.init = dvb_usb_fe_wakeup; - adap->fe_sleep[i] = adap->fe[i]->ops.sleep; - adap->fe[i]->ops.sleep = dvb_usb_fe_sleep; - - ret = dvb_register_frontend(&adap->dvb_adap, adap->fe[i]); - if (ret < 0) { - pr_err("%s: frontend%d registration failed\n", - KBUILD_MODNAME, i); - goto err_dvb_unregister_frontend; - } - - count_registered++; - } - - if (d->props->tuner_attach) { - ret = d->props->tuner_attach(adap); - if (ret < 0) { - pr_debug("%s: tuner_attach() failed=%d\n", __func__, - ret); - goto err_dvb_unregister_frontend; - } - } - - return 0; - -err_dvb_unregister_frontend: - for (i = count_registered - 1; i >= 0; i--) - dvb_unregister_frontend(adap->fe[i]); - -err_dvb_frontend_detach: - for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { - if (adap->fe[i]) - dvb_frontend_detach(adap->fe[i]); - } - -err: - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -int dvb_usbv2_adapter_frontend_exit(struct dvb_usb_adapter *adap) -{ - int i; - pr_debug("%s: adap=%d\n", __func__, adap->id); - - for (i = MAX_NO_OF_FE_PER_ADAP - 1; i >= 0; i--) { - if (adap->fe[i]) { - dvb_unregister_frontend(adap->fe[i]); - dvb_frontend_detach(adap->fe[i]); - } - } - - return 0; -} diff --git a/drivers/media/dvb/dvb-usb/dvb_usb_remote.c b/drivers/media/dvb/dvb-usb/dvb_usb_remote.c deleted file mode 100644 index f856ab6648c7..000000000000 --- a/drivers/media/dvb/dvb-usb/dvb_usb_remote.c +++ /dev/null @@ -1,117 +0,0 @@ -/* dvb-usb-remote.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file contains functions for initializing the input-device and for - * handling remote-control-queries. - */ -#include "dvb_usb_common.h" -#include <linux/usb/input.h> - -/* Remote-control poll function - called every dib->rc_query_interval ms to see - * whether the remote control has received anything. - * - * TODO: Fix the repeat rate of the input device. - */ -static void dvb_usb_read_remote_control(struct work_struct *work) -{ - struct dvb_usb_device *d = container_of(work, - struct dvb_usb_device, rc_query_work.work); - int ret; - - /* TODO: need a lock here. We can simply skip checking for the remote - control if we're busy. */ - - /* when the parameter has been set to 1 via sysfs while the - * driver was running, or when bulk mode is enabled after IR init - */ - if (dvb_usbv2_disable_rc_polling || d->rc.bulk_mode) - return; - - ret = d->rc.query(d); - if (ret < 0) - pr_err("%s: error %d while querying for an remote control " \ - "event\n", KBUILD_MODNAME, ret); - - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(d->rc.interval)); -} - -int dvb_usbv2_remote_init(struct dvb_usb_device *d) -{ - int ret; - struct rc_dev *dev; - - if (dvb_usbv2_disable_rc_polling || !d->props->get_rc_config) - return 0; - - ret = d->props->get_rc_config(d, &d->rc); - if (ret < 0) - goto err; - - dev = rc_allocate_device(); - if (!dev) { - ret = -ENOMEM; - goto err; - } - - dev->dev.parent = &d->udev->dev; - dev->input_name = "IR-receiver inside an USB DVB receiver"; - usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); - strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); - dev->input_phys = d->rc_phys; - usb_to_input_id(d->udev, &dev->input_id); - /* TODO: likely RC-core should took const char * */ - dev->driver_name = (char *) d->props->driver_name; - dev->driver_type = d->rc.driver_type; - dev->allowed_protos = d->rc.allowed_protos; - dev->change_protocol = d->rc.change_protocol; - dev->priv = d; - /* select used keymap */ - if (d->rc.map_name) - dev->map_name = d->rc.map_name; - else if (d->rc_map) - dev->map_name = d->rc_map; - else - dev->map_name = RC_MAP_EMPTY; /* keep rc enabled */ - - ret = rc_register_device(dev); - if (ret < 0) { - rc_free_device(dev); - goto err; - } - - d->input_dev = NULL; - d->rc_dev = dev; - - /* start polling if needed */ - if (d->rc.query && !d->rc.bulk_mode) { - /* initialize a work queue for handling polling */ - INIT_DELAYED_WORK(&d->rc_query_work, - dvb_usb_read_remote_control); - pr_info("%s: schedule remote query interval to %d msecs\n", - KBUILD_MODNAME, d->rc.interval); - schedule_delayed_work(&d->rc_query_work, - msecs_to_jiffies(d->rc.interval)); - } - - d->state |= DVB_USB_STATE_REMOTE; - - return 0; -err: - pr_debug("%s: failed=%d\n", __func__, ret); - return ret; -} - -int dvb_usbv2_remote_exit(struct dvb_usb_device *d) -{ - if (d->state & DVB_USB_STATE_REMOTE) { - cancel_delayed_work_sync(&d->rc_query_work); - rc_unregister_device(d->rc_dev); - } - - d->state &= ~DVB_USB_STATE_REMOTE; - - return 0; -} diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c deleted file mode 100644 index 9382895b1b88..000000000000 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ /dev/null @@ -1,1951 +0,0 @@ -/* DVB USB framework compliant Linux driver for the - * DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101, - * TeVii S600, S630, S650, S660, S480, - * Prof 1100, 7500, - * Geniatech SU3000 Cards - * Copyright (C) 2008-2011 Igor M. Liplianin (liplianin@me.by) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dw2102.h" -#include "si21xx.h" -#include "stv0299.h" -#include "z0194a.h" -#include "stv0288.h" -#include "stb6000.h" -#include "eds1547.h" -#include "cx24116.h" -#include "tda1002x.h" -#include "mt312.h" -#include "zl10039.h" -#include "ds3000.h" -#include "stv0900.h" -#include "stv6110.h" -#include "stb6100.h" -#include "stb6100_proc.h" - -#ifndef USB_PID_DW2102 -#define USB_PID_DW2102 0x2102 -#endif - -#ifndef USB_PID_DW2104 -#define USB_PID_DW2104 0x2104 -#endif - -#ifndef USB_PID_DW3101 -#define USB_PID_DW3101 0x3101 -#endif - -#ifndef USB_PID_CINERGY_S -#define USB_PID_CINERGY_S 0x0064 -#endif - -#ifndef USB_PID_TEVII_S630 -#define USB_PID_TEVII_S630 0xd630 -#endif - -#ifndef USB_PID_TEVII_S650 -#define USB_PID_TEVII_S650 0xd650 -#endif - -#ifndef USB_PID_TEVII_S660 -#define USB_PID_TEVII_S660 0xd660 -#endif - -#ifndef USB_PID_TEVII_S480_1 -#define USB_PID_TEVII_S480_1 0xd481 -#endif - -#ifndef USB_PID_TEVII_S480_2 -#define USB_PID_TEVII_S480_2 0xd482 -#endif - -#ifndef USB_PID_PROF_1100 -#define USB_PID_PROF_1100 0xb012 -#endif - -#define DW210X_READ_MSG 0 -#define DW210X_WRITE_MSG 1 - -#define REG_1F_SYMBOLRATE_BYTE0 0x1f -#define REG_20_SYMBOLRATE_BYTE1 0x20 -#define REG_21_SYMBOLRATE_BYTE2 0x21 -/* on my own*/ -#define DW2102_VOLTAGE_CTRL (0x1800) -#define SU3000_STREAM_CTRL (0x1900) -#define DW2102_RC_QUERY (0x1a00) -#define DW2102_LED_CTRL (0x1b00) - -#define err_str "did not find the firmware file. (%s) " \ - "Please see linux/Documentation/dvb/ for more details " \ - "on firmware-problems." - -struct rc_map_dvb_usb_table_table { - struct rc_map_table *rc_keys; - int rc_keys_size; -}; - -struct su3000_state { - u8 initialized; -}; - -struct s6x0_state { - int (*old_set_voltage)(struct dvb_frontend *f, fe_sec_voltage_t v); -}; - -/* debug */ -static int dvb_usb_dw2102_debug; -module_param_named(debug, dvb_usb_dw2102_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))." - DVB_USB_DEBUG_STATUS); - -/* keymaps */ -static int ir_keymap; -module_param_named(keymap, ir_keymap, int, 0644); -MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs ..." - " 256=none"); - -/* demod probe */ -static int demod_probe = 1; -module_param_named(demod, demod_probe, int, 0644); -MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 " - "4=stv0903+stb6100(or-able))."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value, - u16 index, u8 * data, u16 len, int flags) -{ - int ret; - u8 *u8buf; - unsigned int pipe = (flags == DW210X_READ_MSG) ? - usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); - u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; - - u8buf = kmalloc(len, GFP_KERNEL); - if (!u8buf) - return -ENOMEM; - - - if (flags == DW210X_WRITE_MSG) - memcpy(u8buf, data, len); - ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, - value, index , u8buf, len, 2000); - - if (flags == DW210X_READ_MSG) - memcpy(data, u8buf, len); - - kfree(u8buf); - return ret; -} - -/* I2C */ -static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i = 0; - u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0}; - u16 value; - - if (!d) - return -ENODEV; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - switch (num) { - case 2: - /* read stv0299 register */ - value = msg[0].buf[0];/* register */ - for (i = 0; i < msg[1].len; i++) { - dw210x_op_rw(d->udev, 0xb5, value + i, 0, - buf6, 2, DW210X_READ_MSG); - msg[1].buf[i] = buf6[0]; - } - break; - case 1: - switch (msg[0].addr) { - case 0x68: - /* write to stv0299 register */ - buf6[0] = 0x2a; - buf6[1] = msg[0].buf[0]; - buf6[2] = msg[0].buf[1]; - dw210x_op_rw(d->udev, 0xb2, 0, 0, - buf6, 3, DW210X_WRITE_MSG); - break; - case 0x60: - if (msg[0].flags == 0) { - /* write to tuner pll */ - buf6[0] = 0x2c; - buf6[1] = 5; - buf6[2] = 0xc0; - buf6[3] = msg[0].buf[0]; - buf6[4] = msg[0].buf[1]; - buf6[5] = msg[0].buf[2]; - buf6[6] = msg[0].buf[3]; - dw210x_op_rw(d->udev, 0xb2, 0, 0, - buf6, 7, DW210X_WRITE_MSG); - } else { - /* read from tuner */ - dw210x_op_rw(d->udev, 0xb5, 0, 0, - buf6, 1, DW210X_READ_MSG); - msg[0].buf[0] = buf6[0]; - } - break; - case (DW2102_RC_QUERY): - dw210x_op_rw(d->udev, 0xb8, 0, 0, - buf6, 2, DW210X_READ_MSG); - msg[0].buf[0] = buf6[0]; - msg[0].buf[1] = buf6[1]; - break; - case (DW2102_VOLTAGE_CTRL): - buf6[0] = 0x30; - buf6[1] = msg[0].buf[0]; - dw210x_op_rw(d->udev, 0xb2, 0, 0, - buf6, 2, DW210X_WRITE_MSG); - break; - } - - break; - } - - mutex_unlock(&d->i2c_mutex); - return num; -} - -static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, - struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - u8 buf6[] = {0, 0, 0, 0, 0, 0, 0}; - - if (!d) - return -ENODEV; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - switch (num) { - case 2: - /* read si2109 register by number */ - buf6[0] = msg[0].addr << 1; - buf6[1] = msg[0].len; - buf6[2] = msg[0].buf[0]; - dw210x_op_rw(d->udev, 0xc2, 0, 0, - buf6, msg[0].len + 2, DW210X_WRITE_MSG); - /* read si2109 register */ - dw210x_op_rw(d->udev, 0xc3, 0xd0, 0, - buf6, msg[1].len + 2, DW210X_READ_MSG); - memcpy(msg[1].buf, buf6 + 2, msg[1].len); - - break; - case 1: - switch (msg[0].addr) { - case 0x68: - /* write to si2109 register */ - buf6[0] = msg[0].addr << 1; - buf6[1] = msg[0].len; - memcpy(buf6 + 2, msg[0].buf, msg[0].len); - dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6, - msg[0].len + 2, DW210X_WRITE_MSG); - break; - case(DW2102_RC_QUERY): - dw210x_op_rw(d->udev, 0xb8, 0, 0, - buf6, 2, DW210X_READ_MSG); - msg[0].buf[0] = buf6[0]; - msg[0].buf[1] = buf6[1]; - break; - case(DW2102_VOLTAGE_CTRL): - buf6[0] = 0x30; - buf6[1] = msg[0].buf[0]; - dw210x_op_rw(d->udev, 0xb2, 0, 0, - buf6, 2, DW210X_WRITE_MSG); - break; - } - break; - } - - mutex_unlock(&d->i2c_mutex); - return num; -} - -static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - - if (!d) - return -ENODEV; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - switch (num) { - case 2: { - /* read */ - /* first write first register number */ - u8 ibuf[msg[1].len + 2], obuf[3]; - obuf[0] = msg[0].addr << 1; - obuf[1] = msg[0].len; - obuf[2] = msg[0].buf[0]; - dw210x_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[0].len + 2, DW210X_WRITE_MSG); - /* second read registers */ - dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0, - ibuf, msg[1].len + 2, DW210X_READ_MSG); - memcpy(msg[1].buf, ibuf + 2, msg[1].len); - - break; - } - case 1: - switch (msg[0].addr) { - case 0x68: { - /* write to register */ - u8 obuf[msg[0].len + 2]; - obuf[0] = msg[0].addr << 1; - obuf[1] = msg[0].len; - memcpy(obuf + 2, msg[0].buf, msg[0].len); - dw210x_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[0].len + 2, DW210X_WRITE_MSG); - break; - } - case 0x61: { - /* write to tuner */ - u8 obuf[msg[0].len + 2]; - obuf[0] = msg[0].addr << 1; - obuf[1] = msg[0].len; - memcpy(obuf + 2, msg[0].buf, msg[0].len); - dw210x_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[0].len + 2, DW210X_WRITE_MSG); - break; - } - case(DW2102_RC_QUERY): { - u8 ibuf[2]; - dw210x_op_rw(d->udev, 0xb8, 0, 0, - ibuf, 2, DW210X_READ_MSG); - memcpy(msg[0].buf, ibuf , 2); - break; - } - case(DW2102_VOLTAGE_CTRL): { - u8 obuf[2]; - obuf[0] = 0x30; - obuf[1] = msg[0].buf[0]; - dw210x_op_rw(d->udev, 0xb2, 0, 0, - obuf, 2, DW210X_WRITE_MSG); - break; - } - } - - break; - } - - mutex_unlock(&d->i2c_mutex); - return num; -} - -static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int len, i, j; - - if (!d) - return -ENODEV; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (j = 0; j < num; j++) { - switch (msg[j].addr) { - case(DW2102_RC_QUERY): { - u8 ibuf[2]; - dw210x_op_rw(d->udev, 0xb8, 0, 0, - ibuf, 2, DW210X_READ_MSG); - memcpy(msg[j].buf, ibuf , 2); - break; - } - case(DW2102_VOLTAGE_CTRL): { - u8 obuf[2]; - obuf[0] = 0x30; - obuf[1] = msg[j].buf[0]; - dw210x_op_rw(d->udev, 0xb2, 0, 0, - obuf, 2, DW210X_WRITE_MSG); - break; - } - /*case 0x55: cx24116 - case 0x6a: stv0903 - case 0x68: ds3000, stv0903 - case 0x60: ts2020, stv6110, stb6100 */ - default: { - if (msg[j].flags == I2C_M_RD) { - /* read registers */ - u8 ibuf[msg[j].len + 2]; - dw210x_op_rw(d->udev, 0xc3, - (msg[j].addr << 1) + 1, 0, - ibuf, msg[j].len + 2, - DW210X_READ_MSG); - memcpy(msg[j].buf, ibuf + 2, msg[j].len); - mdelay(10); - } else if (((msg[j].buf[0] == 0xb0) && - (msg[j].addr == 0x68)) || - ((msg[j].buf[0] == 0xf7) && - (msg[j].addr == 0x55))) { - /* write firmware */ - u8 obuf[19]; - obuf[0] = msg[j].addr << 1; - obuf[1] = (msg[j].len > 15 ? 17 : msg[j].len); - obuf[2] = msg[j].buf[0]; - len = msg[j].len - 1; - i = 1; - do { - memcpy(obuf + 3, msg[j].buf + i, - (len > 16 ? 16 : len)); - dw210x_op_rw(d->udev, 0xc2, 0, 0, - obuf, (len > 16 ? 16 : len) + 3, - DW210X_WRITE_MSG); - i += 16; - len -= 16; - } while (len > 0); - } else { - /* write registers */ - u8 obuf[msg[j].len + 2]; - obuf[0] = msg[j].addr << 1; - obuf[1] = msg[j].len; - memcpy(obuf + 2, msg[j].buf, msg[j].len); - dw210x_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[j].len + 2, - DW210X_WRITE_MSG); - } - break; - } - } - - } - - mutex_unlock(&d->i2c_mutex); - return num; -} - -static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - if (!d) - return -ENODEV; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - switch (num) { - case 2: { - /* read */ - /* first write first register number */ - u8 ibuf[msg[1].len + 2], obuf[3]; - obuf[0] = msg[0].addr << 1; - obuf[1] = msg[0].len; - obuf[2] = msg[0].buf[0]; - dw210x_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[0].len + 2, DW210X_WRITE_MSG); - /* second read registers */ - dw210x_op_rw(d->udev, 0xc3, 0x19 , 0, - ibuf, msg[1].len + 2, DW210X_READ_MSG); - memcpy(msg[1].buf, ibuf + 2, msg[1].len); - - break; - } - case 1: - switch (msg[0].addr) { - case 0x60: - case 0x0c: { - /* write to register */ - u8 obuf[msg[0].len + 2]; - obuf[0] = msg[0].addr << 1; - obuf[1] = msg[0].len; - memcpy(obuf + 2, msg[0].buf, msg[0].len); - dw210x_op_rw(d->udev, 0xc2, 0, 0, - obuf, msg[0].len + 2, DW210X_WRITE_MSG); - break; - } - case(DW2102_RC_QUERY): { - u8 ibuf[2]; - dw210x_op_rw(d->udev, 0xb8, 0, 0, - ibuf, 2, DW210X_READ_MSG); - memcpy(msg[0].buf, ibuf , 2); - break; - } - } - - break; - } - - for (i = 0; i < num; i++) { - deb_xfer("%02x:%02x: %s ", i, msg[i].addr, - msg[i].flags == 0 ? ">>>" : "<<<"); - debug_dump(msg[i].buf, msg[i].len, deb_xfer); - } - - mutex_unlock(&d->i2c_mutex); - return num; -} - -static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - struct usb_device *udev; - int len, i, j; - - if (!d) - return -ENODEV; - udev = d->udev; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (j = 0; j < num; j++) { - switch (msg[j].addr) { - case (DW2102_RC_QUERY): { - u8 ibuf[5]; - dw210x_op_rw(d->udev, 0xb8, 0, 0, - ibuf, 5, DW210X_READ_MSG); - memcpy(msg[j].buf, ibuf + 3, 2); - break; - } - case (DW2102_VOLTAGE_CTRL): { - u8 obuf[2]; - - obuf[0] = 1; - obuf[1] = msg[j].buf[1];/* off-on */ - dw210x_op_rw(d->udev, 0x8a, 0, 0, - obuf, 2, DW210X_WRITE_MSG); - obuf[0] = 3; - obuf[1] = msg[j].buf[0];/* 13v-18v */ - dw210x_op_rw(d->udev, 0x8a, 0, 0, - obuf, 2, DW210X_WRITE_MSG); - break; - } - case (DW2102_LED_CTRL): { - u8 obuf[2]; - - obuf[0] = 5; - obuf[1] = msg[j].buf[0]; - dw210x_op_rw(d->udev, 0x8a, 0, 0, - obuf, 2, DW210X_WRITE_MSG); - break; - } - /*case 0x55: cx24116 - case 0x6a: stv0903 - case 0x68: ds3000, stv0903 - case 0x60: ts2020, stv6110, stb6100 - case 0xa0: eeprom */ - default: { - if (msg[j].flags == I2C_M_RD) { - /* read registers */ - u8 ibuf[msg[j].len]; - dw210x_op_rw(d->udev, 0x91, 0, 0, - ibuf, msg[j].len, - DW210X_READ_MSG); - memcpy(msg[j].buf, ibuf, msg[j].len); - break; - } else if ((msg[j].buf[0] == 0xb0) && - (msg[j].addr == 0x68)) { - /* write firmware */ - u8 obuf[19]; - obuf[0] = (msg[j].len > 16 ? - 18 : msg[j].len + 1); - obuf[1] = msg[j].addr << 1; - obuf[2] = msg[j].buf[0]; - len = msg[j].len - 1; - i = 1; - do { - memcpy(obuf + 3, msg[j].buf + i, - (len > 16 ? 16 : len)); - dw210x_op_rw(d->udev, 0x80, 0, 0, - obuf, (len > 16 ? 16 : len) + 3, - DW210X_WRITE_MSG); - i += 16; - len -= 16; - } while (len > 0); - } else if (j < (num - 1)) { - /* write register addr before read */ - u8 obuf[msg[j].len + 2]; - obuf[0] = msg[j + 1].len; - obuf[1] = (msg[j].addr << 1); - memcpy(obuf + 2, msg[j].buf, msg[j].len); - dw210x_op_rw(d->udev, - udev->descriptor.idProduct == - 0x7500 ? 0x92 : 0x90, 0, 0, - obuf, msg[j].len + 2, - DW210X_WRITE_MSG); - break; - } else { - /* write registers */ - u8 obuf[msg[j].len + 2]; - obuf[0] = msg[j].len + 1; - obuf[1] = (msg[j].addr << 1); - memcpy(obuf + 2, msg[j].buf, msg[j].len); - dw210x_op_rw(d->udev, 0x80, 0, 0, - obuf, msg[j].len + 2, - DW210X_WRITE_MSG); - break; - } - break; - } - } - } - - mutex_unlock(&d->i2c_mutex); - return num; -} - -static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - u8 obuf[0x40], ibuf[0x40]; - - if (!d) - return -ENODEV; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - switch (num) { - case 1: - switch (msg[0].addr) { - case SU3000_STREAM_CTRL: - obuf[0] = msg[0].buf[0] + 0x36; - obuf[1] = 3; - obuf[2] = 0; - if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0) - err("i2c transfer failed."); - break; - case DW2102_RC_QUERY: - obuf[0] = 0x10; - if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0) - err("i2c transfer failed."); - msg[0].buf[1] = ibuf[0]; - msg[0].buf[0] = ibuf[1]; - break; - default: - /* always i2c write*/ - obuf[0] = 0x08; - obuf[1] = msg[0].addr; - obuf[2] = msg[0].len; - - memcpy(&obuf[3], msg[0].buf, msg[0].len); - - if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3, - ibuf, 1, 0) < 0) - err("i2c transfer failed."); - - } - break; - case 2: - /* always i2c read */ - obuf[0] = 0x09; - obuf[1] = msg[0].len; - obuf[2] = msg[1].len; - obuf[3] = msg[0].addr; - memcpy(&obuf[4], msg[0].buf, msg[0].len); - - if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4, - ibuf, msg[1].len + 1, 0) < 0) - err("i2c transfer failed."); - - memcpy(msg[1].buf, &ibuf[1], msg[1].len); - break; - default: - warn("more than 2 i2c messages at a time is not handled yet."); - break; - } - mutex_unlock(&d->i2c_mutex); - return num; -} - -static u32 dw210x_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm dw2102_i2c_algo = { - .master_xfer = dw2102_i2c_transfer, - .functionality = dw210x_i2c_func, -}; - -static struct i2c_algorithm dw2102_serit_i2c_algo = { - .master_xfer = dw2102_serit_i2c_transfer, - .functionality = dw210x_i2c_func, -}; - -static struct i2c_algorithm dw2102_earda_i2c_algo = { - .master_xfer = dw2102_earda_i2c_transfer, - .functionality = dw210x_i2c_func, -}; - -static struct i2c_algorithm dw2104_i2c_algo = { - .master_xfer = dw2104_i2c_transfer, - .functionality = dw210x_i2c_func, -}; - -static struct i2c_algorithm dw3101_i2c_algo = { - .master_xfer = dw3101_i2c_transfer, - .functionality = dw210x_i2c_func, -}; - -static struct i2c_algorithm s6x0_i2c_algo = { - .master_xfer = s6x0_i2c_transfer, - .functionality = dw210x_i2c_func, -}; - -static struct i2c_algorithm su3000_i2c_algo = { - .master_xfer = su3000_i2c_transfer, - .functionality = dw210x_i2c_func, -}; - -static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) -{ - int i; - u8 ibuf[] = {0, 0}; - u8 eeprom[256], eepromline[16]; - - for (i = 0; i < 256; i++) { - if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) { - err("read eeprom failed."); - return -1; - } else { - eepromline[i%16] = ibuf[0]; - eeprom[i] = ibuf[0]; - } - if ((i % 16) == 15) { - deb_xfer("%02x: ", i - 15); - debug_dump(eepromline, 16, deb_xfer); - } - } - - memcpy(mac, eeprom + 8, 6); - return 0; -}; - -static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) -{ - int i, ret; - u8 ibuf[] = { 0 }, obuf[] = { 0 }; - u8 eeprom[256], eepromline[16]; - struct i2c_msg msg[] = { - { - .addr = 0xa0 >> 1, - .flags = 0, - .buf = obuf, - .len = 1, - }, { - .addr = 0xa0 >> 1, - .flags = I2C_M_RD, - .buf = ibuf, - .len = 1, - } - }; - - for (i = 0; i < 256; i++) { - obuf[0] = i; - ret = s6x0_i2c_transfer(&d->i2c_adap, msg, 2); - if (ret != 2) { - err("read eeprom failed."); - return -1; - } else { - eepromline[i % 16] = ibuf[0]; - eeprom[i] = ibuf[0]; - } - - if ((i % 16) == 15) { - deb_xfer("%02x: ", i - 15); - debug_dump(eepromline, 16, deb_xfer); - } - } - - memcpy(mac, eeprom + 16, 6); - return 0; -}; - -static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - static u8 command_start[] = {0x00}; - static u8 command_stop[] = {0x01}; - struct i2c_msg msg = { - .addr = SU3000_STREAM_CTRL, - .flags = 0, - .buf = onoff ? command_start : command_stop, - .len = 1 - }; - - i2c_transfer(&adap->dev->i2c_adap, &msg, 1); - - return 0; -} - -static int su3000_power_ctrl(struct dvb_usb_device *d, int i) -{ - struct su3000_state *state = (struct su3000_state *)d->priv; - u8 obuf[] = {0xde, 0}; - - info("%s: %d, initialized %d\n", __func__, i, state->initialized); - - if (i && !state->initialized) { - state->initialized = 1; - /* reset board */ - dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); - } - - return 0; -} - -static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) -{ - int i; - u8 obuf[] = { 0x1f, 0xf0 }; - u8 ibuf[] = { 0 }; - struct i2c_msg msg[] = { - { - .addr = 0x51, - .flags = 0, - .buf = obuf, - .len = 2, - }, { - .addr = 0x51, - .flags = I2C_M_RD, - .buf = ibuf, - .len = 1, - - } - }; - - for (i = 0; i < 6; i++) { - obuf[1] = 0xf0 + i; - if (i2c_transfer(&d->i2c_adap, msg, 2) != 2) - break; - else - mac[i] = ibuf[0]; - - debug_dump(mac, 6, printk); - } - - return 0; -} - -static int su3000_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - info("%s\n", __func__); - - *cold = 0; - return 0; -} - -static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) -{ - static u8 command_13v[] = {0x00, 0x01}; - static u8 command_18v[] = {0x01, 0x01}; - static u8 command_off[] = {0x00, 0x00}; - struct i2c_msg msg = { - .addr = DW2102_VOLTAGE_CTRL, - .flags = 0, - .buf = command_off, - .len = 2, - }; - - struct dvb_usb_adapter *udev_adap = - (struct dvb_usb_adapter *)(fe->dvb->priv); - if (voltage == SEC_VOLTAGE_18) - msg.buf = command_18v; - else if (voltage == SEC_VOLTAGE_13) - msg.buf = command_13v; - - i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1); - - return 0; -} - -static int s660_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) -{ - struct dvb_usb_adapter *d = - (struct dvb_usb_adapter *)(fe->dvb->priv); - struct s6x0_state *st = (struct s6x0_state *)d->dev->priv; - - dw210x_set_voltage(fe, voltage); - if (st->old_set_voltage) - st->old_set_voltage(fe, voltage); - - return 0; -} - -static void dw210x_led_ctrl(struct dvb_frontend *fe, int offon) -{ - static u8 led_off[] = { 0 }; - static u8 led_on[] = { 1 }; - struct i2c_msg msg = { - .addr = DW2102_LED_CTRL, - .flags = 0, - .buf = led_off, - .len = 1 - }; - struct dvb_usb_adapter *udev_adap = - (struct dvb_usb_adapter *)(fe->dvb->priv); - - if (offon) - msg.buf = led_on; - i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1); -} - -static struct stv0299_config sharp_z0194a_config = { - .demod_address = 0x68, - .inittab = sharp_z0194a_inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = sharp_z0194a_set_symbol_rate, -}; - -static struct cx24116_config dw2104_config = { - .demod_address = 0x55, - .mpg_clk_pos_pol = 0x01, -}; - -static struct si21xx_config serit_sp1511lhb_config = { - .demod_address = 0x68, - .min_delay_ms = 100, - -}; - -static struct tda10023_config dw3101_tda10023_config = { - .demod_address = 0x0c, - .invert = 1, -}; - -static struct mt312_config zl313_config = { - .demod_address = 0x0e, -}; - -static struct ds3000_config dw2104_ds3000_config = { - .demod_address = 0x68, -}; - -static struct stv0900_config dw2104a_stv0900_config = { - .demod_address = 0x6a, - .demod_mode = 0, - .xtal = 27000000, - .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ - .diseqc_mode = 2,/* 2/3 PWM */ - .tun1_maddress = 0,/* 0x60 */ - .tun1_adc = 0,/* 2 Vpp */ - .path1_mode = 3, -}; - -static struct stb6100_config dw2104a_stb6100_config = { - .tuner_address = 0x60, - .refclock = 27000000, -}; - -static struct stv0900_config dw2104_stv0900_config = { - .demod_address = 0x68, - .demod_mode = 0, - .xtal = 8000000, - .clkmode = 3, - .diseqc_mode = 2, - .tun1_maddress = 0, - .tun1_adc = 1,/* 1 Vpp */ - .path1_mode = 3, -}; - -static struct stv6110_config dw2104_stv6110_config = { - .i2c_address = 0x60, - .mclk = 16000000, - .clk_div = 1, -}; - -static struct stv0900_config prof_7500_stv0900_config = { - .demod_address = 0x6a, - .demod_mode = 0, - .xtal = 27000000, - .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ - .diseqc_mode = 2,/* 2/3 PWM */ - .tun1_maddress = 0,/* 0x60 */ - .tun1_adc = 0,/* 2 Vpp */ - .path1_mode = 3, - .tun1_type = 3, - .set_lock_led = dw210x_led_ctrl, -}; - -static struct ds3000_config su3000_ds3000_config = { - .demod_address = 0x68, - .ci_mode = 1, -}; - -static int dw2104_frontend_attach(struct dvb_usb_adapter *d) -{ - struct dvb_tuner_ops *tuner_ops = NULL; - - if (demod_probe & 4) { - d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config, - &d->dev->i2c_adap, 0); - if (d->fe_adap[0].fe != NULL) { - if (dvb_attach(stb6100_attach, d->fe_adap[0].fe, - &dw2104a_stb6100_config, - &d->dev->i2c_adap)) { - tuner_ops = &d->fe_adap[0].fe->ops.tuner_ops; - tuner_ops->set_frequency = stb6100_set_freq; - tuner_ops->get_frequency = stb6100_get_freq; - tuner_ops->set_bandwidth = stb6100_set_bandw; - tuner_ops->get_bandwidth = stb6100_get_bandw; - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached STV0900+STB6100!\n"); - return 0; - } - } - } - - if (demod_probe & 2) { - d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config, - &d->dev->i2c_adap, 0); - if (d->fe_adap[0].fe != NULL) { - if (dvb_attach(stv6110_attach, d->fe_adap[0].fe, - &dw2104_stv6110_config, - &d->dev->i2c_adap)) { - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached STV0900+STV6110A!\n"); - return 0; - } - } - } - - if (demod_probe & 1) { - d->fe_adap[0].fe = dvb_attach(cx24116_attach, &dw2104_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe != NULL) { - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached cx24116!\n"); - return 0; - } - } - - d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe != NULL) { - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached DS3000!\n"); - return 0; - } - - return -EIO; -} - -static struct dvb_usb_device_properties dw2102_properties; -static struct dvb_usb_device_properties dw2104_properties; -static struct dvb_usb_device_properties s6x0_properties; - -static int dw2102_frontend_attach(struct dvb_usb_adapter *d) -{ - if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) { - /*dw2102_properties.adapter->tuner_attach = NULL;*/ - d->fe_adap[0].fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe != NULL) { - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached si21xx!\n"); - return 0; - } - } - - if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) { - d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe != NULL) { - if (dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, - &d->dev->i2c_adap)) { - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached stv0288!\n"); - return 0; - } - } - } - - if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) { - /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ - d->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe != NULL) { - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached stv0299!\n"); - return 0; - } - } - return -EIO; -} - -static int dw3101_frontend_attach(struct dvb_usb_adapter *d) -{ - d->fe_adap[0].fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config, - &d->dev->i2c_adap, 0x48); - if (d->fe_adap[0].fe != NULL) { - info("Attached tda10023!\n"); - return 0; - } - return -EIO; -} - -static int zl100313_frontend_attach(struct dvb_usb_adapter *d) -{ - d->fe_adap[0].fe = dvb_attach(mt312_attach, &zl313_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe != NULL) { - if (dvb_attach(zl10039_attach, d->fe_adap[0].fe, 0x60, - &d->dev->i2c_adap)) { - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - info("Attached zl100313+zl10039!\n"); - return 0; - } - } - - return -EIO; -} - -static int stv0288_frontend_attach(struct dvb_usb_adapter *d) -{ - u8 obuf[] = {7, 1}; - - d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config, - &d->dev->i2c_adap); - - if (d->fe_adap[0].fe == NULL) - return -EIO; - - if (NULL == dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, &d->dev->i2c_adap)) - return -EIO; - - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - - dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); - - info("Attached stv0288+stb6000!\n"); - - return 0; - -} - -static int ds3000_frontend_attach(struct dvb_usb_adapter *d) -{ - struct s6x0_state *st = (struct s6x0_state *)d->dev->priv; - u8 obuf[] = {7, 1}; - - d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config, - &d->dev->i2c_adap); - - if (d->fe_adap[0].fe == NULL) - return -EIO; - - st->old_set_voltage = d->fe_adap[0].fe->ops.set_voltage; - d->fe_adap[0].fe->ops.set_voltage = s660_set_voltage; - - dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); - - info("Attached ds3000+ds2020!\n"); - - return 0; -} - -static int prof_7500_frontend_attach(struct dvb_usb_adapter *d) -{ - u8 obuf[] = {7, 1}; - - d->fe_adap[0].fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config, - &d->dev->i2c_adap, 0); - if (d->fe_adap[0].fe == NULL) - return -EIO; - - d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; - - dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); - - info("Attached STV0900+STB6100A!\n"); - - return 0; -} - -static int su3000_frontend_attach(struct dvb_usb_adapter *d) -{ - u8 obuf[3] = { 0xe, 0x80, 0 }; - u8 ibuf[] = { 0 }; - - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) - err("command 0x0e transfer failed."); - - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 0; - - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) - err("command 0x0e transfer failed."); - - obuf[0] = 0xe; - obuf[1] = 0x83; - obuf[2] = 1; - - if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) - err("command 0x0e transfer failed."); - - obuf[0] = 0x51; - - if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) - err("command 0x51 transfer failed."); - - d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config, - &d->dev->i2c_adap); - if (d->fe_adap[0].fe == NULL) - return -EIO; - - info("Attached DS3000!\n"); - - return 0; -} - -static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, - &adap->dev->i2c_adap, DVB_PLL_OPERA1); - return 0; -} - -static int dw3101_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, - &adap->dev->i2c_adap, DVB_PLL_TUA6034); - - return 0; -} - -static struct rc_map_table rc_map_dw210x_table[] = { - { 0xf80a, KEY_POWER2 }, /*power*/ - { 0xf80c, KEY_MUTE }, /*mute*/ - { 0xf811, KEY_1 }, - { 0xf812, KEY_2 }, - { 0xf813, KEY_3 }, - { 0xf814, KEY_4 }, - { 0xf815, KEY_5 }, - { 0xf816, KEY_6 }, - { 0xf817, KEY_7 }, - { 0xf818, KEY_8 }, - { 0xf819, KEY_9 }, - { 0xf810, KEY_0 }, - { 0xf81c, KEY_CHANNELUP }, /*ch+*/ - { 0xf80f, KEY_CHANNELDOWN }, /*ch-*/ - { 0xf81a, KEY_VOLUMEUP }, /*vol+*/ - { 0xf80e, KEY_VOLUMEDOWN }, /*vol-*/ - { 0xf804, KEY_RECORD }, /*rec*/ - { 0xf809, KEY_FAVORITES }, /*fav*/ - { 0xf808, KEY_REWIND }, /*rewind*/ - { 0xf807, KEY_FASTFORWARD }, /*fast*/ - { 0xf80b, KEY_PAUSE }, /*pause*/ - { 0xf802, KEY_ESC }, /*cancel*/ - { 0xf803, KEY_TAB }, /*tab*/ - { 0xf800, KEY_UP }, /*up*/ - { 0xf81f, KEY_OK }, /*ok*/ - { 0xf801, KEY_DOWN }, /*down*/ - { 0xf805, KEY_CAMERA }, /*cap*/ - { 0xf806, KEY_STOP }, /*stop*/ - { 0xf840, KEY_ZOOM }, /*full*/ - { 0xf81e, KEY_TV }, /*tvmode*/ - { 0xf81b, KEY_LAST }, /*recall*/ -}; - -static struct rc_map_table rc_map_tevii_table[] = { - { 0xf80a, KEY_POWER }, - { 0xf80c, KEY_MUTE }, - { 0xf811, KEY_1 }, - { 0xf812, KEY_2 }, - { 0xf813, KEY_3 }, - { 0xf814, KEY_4 }, - { 0xf815, KEY_5 }, - { 0xf816, KEY_6 }, - { 0xf817, KEY_7 }, - { 0xf818, KEY_8 }, - { 0xf819, KEY_9 }, - { 0xf810, KEY_0 }, - { 0xf81c, KEY_MENU }, - { 0xf80f, KEY_VOLUMEDOWN }, - { 0xf81a, KEY_LAST }, - { 0xf80e, KEY_OPEN }, - { 0xf804, KEY_RECORD }, - { 0xf809, KEY_VOLUMEUP }, - { 0xf808, KEY_CHANNELUP }, - { 0xf807, KEY_PVR }, - { 0xf80b, KEY_TIME }, - { 0xf802, KEY_RIGHT }, - { 0xf803, KEY_LEFT }, - { 0xf800, KEY_UP }, - { 0xf81f, KEY_OK }, - { 0xf801, KEY_DOWN }, - { 0xf805, KEY_TUNER }, - { 0xf806, KEY_CHANNELDOWN }, - { 0xf840, KEY_PLAYPAUSE }, - { 0xf81e, KEY_REWIND }, - { 0xf81b, KEY_FAVORITES }, - { 0xf81d, KEY_BACK }, - { 0xf84d, KEY_FASTFORWARD }, - { 0xf844, KEY_EPG }, - { 0xf84c, KEY_INFO }, - { 0xf841, KEY_AB }, - { 0xf843, KEY_AUDIO }, - { 0xf845, KEY_SUBTITLE }, - { 0xf84a, KEY_LIST }, - { 0xf846, KEY_F1 }, - { 0xf847, KEY_F2 }, - { 0xf85e, KEY_F3 }, - { 0xf85c, KEY_F4 }, - { 0xf852, KEY_F5 }, - { 0xf85a, KEY_F6 }, - { 0xf856, KEY_MODE }, - { 0xf858, KEY_SWITCHVIDEOMODE }, -}; - -static struct rc_map_table rc_map_tbs_table[] = { - { 0xf884, KEY_POWER }, - { 0xf894, KEY_MUTE }, - { 0xf887, KEY_1 }, - { 0xf886, KEY_2 }, - { 0xf885, KEY_3 }, - { 0xf88b, KEY_4 }, - { 0xf88a, KEY_5 }, - { 0xf889, KEY_6 }, - { 0xf88f, KEY_7 }, - { 0xf88e, KEY_8 }, - { 0xf88d, KEY_9 }, - { 0xf892, KEY_0 }, - { 0xf896, KEY_CHANNELUP }, - { 0xf891, KEY_CHANNELDOWN }, - { 0xf893, KEY_VOLUMEUP }, - { 0xf88c, KEY_VOLUMEDOWN }, - { 0xf883, KEY_RECORD }, - { 0xf898, KEY_PAUSE }, - { 0xf899, KEY_OK }, - { 0xf89a, KEY_SHUFFLE }, - { 0xf881, KEY_UP }, - { 0xf890, KEY_LEFT }, - { 0xf882, KEY_RIGHT }, - { 0xf888, KEY_DOWN }, - { 0xf895, KEY_FAVORITES }, - { 0xf897, KEY_SUBTITLE }, - { 0xf89d, KEY_ZOOM }, - { 0xf89f, KEY_EXIT }, - { 0xf89e, KEY_MENU }, - { 0xf89c, KEY_EPG }, - { 0xf880, KEY_PREVIOUS }, - { 0xf89b, KEY_MODE } -}; - -static struct rc_map_table rc_map_su3000_table[] = { - { 0x25, KEY_POWER }, /* right-bottom Red */ - { 0x0a, KEY_MUTE }, /* -/-- */ - { 0x01, KEY_1 }, - { 0x02, KEY_2 }, - { 0x03, KEY_3 }, - { 0x04, KEY_4 }, - { 0x05, KEY_5 }, - { 0x06, KEY_6 }, - { 0x07, KEY_7 }, - { 0x08, KEY_8 }, - { 0x09, KEY_9 }, - { 0x00, KEY_0 }, - { 0x20, KEY_UP }, /* CH+ */ - { 0x21, KEY_DOWN }, /* CH+ */ - { 0x12, KEY_VOLUMEUP }, /* Brightness Up */ - { 0x13, KEY_VOLUMEDOWN },/* Brightness Down */ - { 0x1f, KEY_RECORD }, - { 0x17, KEY_PLAY }, - { 0x16, KEY_PAUSE }, - { 0x0b, KEY_STOP }, - { 0x27, KEY_FASTFORWARD },/* >> */ - { 0x26, KEY_REWIND }, /* << */ - { 0x0d, KEY_OK }, /* Mute */ - { 0x11, KEY_LEFT }, /* VOL- */ - { 0x10, KEY_RIGHT }, /* VOL+ */ - { 0x29, KEY_BACK }, /* button under 9 */ - { 0x2c, KEY_MENU }, /* TTX */ - { 0x2b, KEY_EPG }, /* EPG */ - { 0x1e, KEY_RED }, /* OSD */ - { 0x0e, KEY_GREEN }, /* Window */ - { 0x2d, KEY_YELLOW }, /* button under << */ - { 0x0f, KEY_BLUE }, /* bottom yellow button */ - { 0x14, KEY_AUDIO }, /* Snapshot */ - { 0x38, KEY_TV }, /* TV/Radio */ - { 0x0c, KEY_ESC } /* upper Red button */ -}; - -static struct rc_map_dvb_usb_table_table keys_tables[] = { - { rc_map_dw210x_table, ARRAY_SIZE(rc_map_dw210x_table) }, - { rc_map_tevii_table, ARRAY_SIZE(rc_map_tevii_table) }, - { rc_map_tbs_table, ARRAY_SIZE(rc_map_tbs_table) }, - { rc_map_su3000_table, ARRAY_SIZE(rc_map_su3000_table) }, -}; - -static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; - int keymap_size = d->props.rc.legacy.rc_map_size; - u8 key[2]; - struct i2c_msg msg = { - .addr = DW2102_RC_QUERY, - .flags = I2C_M_RD, - .buf = key, - .len = 2 - }; - int i; - /* override keymap */ - if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) { - keymap = keys_tables[ir_keymap - 1].rc_keys ; - keymap_size = keys_tables[ir_keymap - 1].rc_keys_size; - } else if (ir_keymap > ARRAY_SIZE(keys_tables)) - return 0; /* none */ - - *state = REMOTE_NO_KEY_PRESSED; - if (d->props.i2c_algo->master_xfer(&d->i2c_adap, &msg, 1) == 1) { - for (i = 0; i < keymap_size ; i++) { - if (rc5_data(&keymap[i]) == msg.buf[0]) { - *state = REMOTE_KEY_PRESSED; - *event = keymap[i].keycode; - break; - } - - } - - if ((*state) == REMOTE_KEY_PRESSED) - deb_rc("%s: found rc key: %x, %x, event: %x\n", - __func__, key[0], key[1], (*event)); - else if (key[0] != 0xff) - deb_rc("%s: unknown rc key: %x, %x\n", - __func__, key[0], key[1]); - - } - - return 0; -} - -enum dw2102_table_entry { - CYPRESS_DW2102, - CYPRESS_DW2101, - CYPRESS_DW2104, - TEVII_S650, - TERRATEC_CINERGY_S, - CYPRESS_DW3101, - TEVII_S630, - PROF_1100, - TEVII_S660, - PROF_7500, - GENIATECH_SU3000, - TERRATEC_CINERGY_S2, - TEVII_S480_1, - TEVII_S480_2, - X3M_SPC1400HD, -}; - -static struct usb_device_id dw2102_table[] = { - [CYPRESS_DW2102] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)}, - [CYPRESS_DW2101] = {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, - [CYPRESS_DW2104] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)}, - [TEVII_S650] = {USB_DEVICE(0x9022, USB_PID_TEVII_S650)}, - [TERRATEC_CINERGY_S] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)}, - [CYPRESS_DW3101] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)}, - [TEVII_S630] = {USB_DEVICE(0x9022, USB_PID_TEVII_S630)}, - [PROF_1100] = {USB_DEVICE(0x3011, USB_PID_PROF_1100)}, - [TEVII_S660] = {USB_DEVICE(0x9022, USB_PID_TEVII_S660)}, - [PROF_7500] = {USB_DEVICE(0x3034, 0x7500)}, - [GENIATECH_SU3000] = {USB_DEVICE(0x1f4d, 0x3000)}, - [TERRATEC_CINERGY_S2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00a8)}, - [TEVII_S480_1] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_1)}, - [TEVII_S480_2] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_2)}, - [X3M_SPC1400HD] = {USB_DEVICE(0x1f4d, 0x3100)}, - { } -}; - -MODULE_DEVICE_TABLE(usb, dw2102_table); - -static int dw2102_load_firmware(struct usb_device *dev, - const struct firmware *frmwr) -{ - u8 *b, *p; - int ret = 0, i; - u8 reset; - u8 reset16[] = {0, 0, 0, 0, 0, 0, 0}; - const struct firmware *fw; - const char *fw_2101 = "dvb-usb-dw2101.fw"; - - switch (dev->descriptor.idProduct) { - case 0x2101: - ret = request_firmware(&fw, fw_2101, &dev->dev); - if (ret != 0) { - err(err_str, fw_2101); - return ret; - } - break; - default: - fw = frmwr; - break; - } - info("start downloading DW210X firmware"); - p = kmalloc(fw->size, GFP_KERNEL); - reset = 1; - /*stop the CPU*/ - dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG); - dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG); - - if (p != NULL) { - memcpy(p, fw->data, fw->size); - for (i = 0; i < fw->size; i += 0x40) { - b = (u8 *) p + i; - if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40, - DW210X_WRITE_MSG) != 0x40) { - err("error while transferring firmware"); - ret = -EINVAL; - break; - } - } - /* restart the CPU */ - reset = 0; - if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, - DW210X_WRITE_MSG) != 1) { - err("could not restart the USB controller CPU."); - ret = -EINVAL; - } - if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, - DW210X_WRITE_MSG) != 1) { - err("could not restart the USB controller CPU."); - ret = -EINVAL; - } - /* init registers */ - switch (dev->descriptor.idProduct) { - case USB_PID_TEVII_S650: - dw2104_properties.rc.legacy.rc_map_table = rc_map_tevii_table; - dw2104_properties.rc.legacy.rc_map_size = - ARRAY_SIZE(rc_map_tevii_table); - case USB_PID_DW2104: - reset = 1; - dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, - DW210X_WRITE_MSG); - /* break omitted intentionally */ - case USB_PID_DW3101: - reset = 0; - dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, - DW210X_WRITE_MSG); - break; - case USB_PID_CINERGY_S: - case USB_PID_DW2102: - dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, - DW210X_WRITE_MSG); - dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, - DW210X_READ_MSG); - /* check STV0299 frontend */ - dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, - DW210X_READ_MSG); - if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) { - dw2102_properties.i2c_algo = &dw2102_i2c_algo; - dw2102_properties.adapter->fe[0].tuner_attach = &dw2102_tuner_attach; - break; - } else { - /* check STV0288 frontend */ - reset16[0] = 0xd0; - reset16[1] = 1; - reset16[2] = 0; - dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3, - DW210X_WRITE_MSG); - dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3, - DW210X_READ_MSG); - if (reset16[2] == 0x11) { - dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo; - break; - } - } - case 0x2101: - dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, - DW210X_READ_MSG); - dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, - DW210X_READ_MSG); - dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, - DW210X_READ_MSG); - dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, - DW210X_READ_MSG); - break; - } - - msleep(100); - kfree(p); - } - return ret; -} - -static struct dvb_usb_device_properties dw2102_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-dw2102.fw", - .no_reconnect = 1, - - .i2c_algo = &dw2102_serit_i2c_algo, - - .rc.legacy = { - .rc_map_table = rc_map_dw210x_table, - .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), - .rc_interval = 150, - .rc_query = dw2102_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x81, - /* parameter for the MPEG2-data transfer */ - .num_adapters = 1, - .download_firmware = dw2102_load_firmware, - .read_mac_address = dw210x_read_mac_address, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = dw2102_frontend_attach, - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .num_device_descs = 3, - .devices = { - {"DVBWorld DVB-S 2102 USB2.0", - {&dw2102_table[CYPRESS_DW2102], NULL}, - {NULL}, - }, - {"DVBWorld DVB-S 2101 USB2.0", - {&dw2102_table[CYPRESS_DW2101], NULL}, - {NULL}, - }, - {"TerraTec Cinergy S USB", - {&dw2102_table[TERRATEC_CINERGY_S], NULL}, - {NULL}, - }, - } -}; - -static struct dvb_usb_device_properties dw2104_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-dw2104.fw", - .no_reconnect = 1, - - .i2c_algo = &dw2104_i2c_algo, - .rc.legacy = { - .rc_map_table = rc_map_dw210x_table, - .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), - .rc_interval = 150, - .rc_query = dw2102_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x81, - /* parameter for the MPEG2-data transfer */ - .num_adapters = 1, - .download_firmware = dw2102_load_firmware, - .read_mac_address = dw210x_read_mac_address, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = dw2104_frontend_attach, - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .num_device_descs = 2, - .devices = { - { "DVBWorld DW2104 USB2.0", - {&dw2102_table[CYPRESS_DW2104], NULL}, - {NULL}, - }, - { "TeVii S650 USB2.0", - {&dw2102_table[TEVII_S650], NULL}, - {NULL}, - }, - } -}; - -static struct dvb_usb_device_properties dw3101_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-dw3101.fw", - .no_reconnect = 1, - - .i2c_algo = &dw3101_i2c_algo, - .rc.legacy = { - .rc_map_table = rc_map_dw210x_table, - .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), - .rc_interval = 150, - .rc_query = dw2102_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x81, - /* parameter for the MPEG2-data transfer */ - .num_adapters = 1, - .download_firmware = dw2102_load_firmware, - .read_mac_address = dw210x_read_mac_address, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = dw3101_frontend_attach, - .tuner_attach = dw3101_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .num_device_descs = 1, - .devices = { - { "DVBWorld DVB-C 3101 USB2.0", - {&dw2102_table[CYPRESS_DW3101], NULL}, - {NULL}, - }, - } -}; - -static struct dvb_usb_device_properties s6x0_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = sizeof(struct s6x0_state), - .firmware = "dvb-usb-s630.fw", - .no_reconnect = 1, - - .i2c_algo = &s6x0_i2c_algo, - .rc.legacy = { - .rc_map_table = rc_map_tevii_table, - .rc_map_size = ARRAY_SIZE(rc_map_tevii_table), - .rc_interval = 150, - .rc_query = dw2102_rc_query, - }, - - .generic_bulk_ctrl_endpoint = 0x81, - .num_adapters = 1, - .download_firmware = dw2102_load_firmware, - .read_mac_address = s6x0_read_mac_address, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = zl100313_frontend_attach, - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .num_device_descs = 1, - .devices = { - {"TeVii S630 USB", - {&dw2102_table[TEVII_S630], NULL}, - {NULL}, - }, - } -}; - -struct dvb_usb_device_properties *p1100; -static struct dvb_usb_device_description d1100 = { - "Prof 1100 USB ", - {&dw2102_table[PROF_1100], NULL}, - {NULL}, -}; - -struct dvb_usb_device_properties *s660; -static struct dvb_usb_device_description d660 = { - "TeVii S660 USB", - {&dw2102_table[TEVII_S660], NULL}, - {NULL}, -}; - -static struct dvb_usb_device_description d480_1 = { - "TeVii S480.1 USB", - {&dw2102_table[TEVII_S480_1], NULL}, - {NULL}, -}; - -static struct dvb_usb_device_description d480_2 = { - "TeVii S480.2 USB", - {&dw2102_table[TEVII_S480_2], NULL}, - {NULL}, -}; - -struct dvb_usb_device_properties *p7500; -static struct dvb_usb_device_description d7500 = { - "Prof 7500 USB DVB-S2", - {&dw2102_table[PROF_7500], NULL}, - {NULL}, -}; - -static struct dvb_usb_device_properties su3000_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = sizeof(struct su3000_state), - .power_ctrl = su3000_power_ctrl, - .num_adapters = 1, - .identify_state = su3000_identify_state, - .i2c_algo = &su3000_i2c_algo, - - .rc.legacy = { - .rc_map_table = rc_map_su3000_table, - .rc_map_size = ARRAY_SIZE(rc_map_su3000_table), - .rc_interval = 150, - .rc_query = dw2102_rc_query, - }, - - .read_mac_address = su3000_read_mac_address, - - .generic_bulk_ctrl_endpoint = 0x01, - - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = su3000_streaming_ctrl, - .frontend_attach = su3000_frontend_attach, - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 4096, - } - } - } - }}, - } - }, - .num_device_descs = 3, - .devices = { - { "SU3000HD DVB-S USB2.0", - { &dw2102_table[GENIATECH_SU3000], NULL }, - { NULL }, - }, - { "Terratec Cinergy S2 USB HD", - { &dw2102_table[TERRATEC_CINERGY_S2], NULL }, - { NULL }, - }, - { "X3M TV SPC1400HD PCI", - { &dw2102_table[X3M_SPC1400HD], NULL }, - { NULL }, - }, - } -}; - -static int dw2102_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - p1100 = kmemdup(&s6x0_properties, - sizeof(struct dvb_usb_device_properties), GFP_KERNEL); - if (!p1100) - return -ENOMEM; - /* copy default structure */ - /* fill only different fields */ - p1100->firmware = "dvb-usb-p1100.fw"; - p1100->devices[0] = d1100; - p1100->rc.legacy.rc_map_table = rc_map_tbs_table; - p1100->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table); - p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach; - - s660 = kmemdup(&s6x0_properties, - sizeof(struct dvb_usb_device_properties), GFP_KERNEL); - if (!s660) { - kfree(p1100); - return -ENOMEM; - } - s660->firmware = "dvb-usb-s660.fw"; - s660->num_device_descs = 3; - s660->devices[0] = d660; - s660->devices[1] = d480_1; - s660->devices[2] = d480_2; - s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach; - - p7500 = kmemdup(&s6x0_properties, - sizeof(struct dvb_usb_device_properties), GFP_KERNEL); - if (!p7500) { - kfree(p1100); - kfree(s660); - return -ENOMEM; - } - p7500->firmware = "dvb-usb-p7500.fw"; - p7500->devices[0] = d7500; - p7500->rc.legacy.rc_map_table = rc_map_tbs_table; - p7500->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table); - p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach; - - if (0 == dvb_usb_device_init(intf, &dw2102_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &dw2104_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &dw3101_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &s6x0_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, p1100, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, s660, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, p7500, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &su3000_properties, - THIS_MODULE, NULL, adapter_nr)) - return 0; - - return -ENODEV; -} - -static struct usb_driver dw2102_driver = { - .name = "dw2102", - .probe = dw2102_probe, - .disconnect = dvb_usb_device_exit, - .id_table = dw2102_table, -}; - -module_usb_driver(dw2102_driver); - -MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); -MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104," - " DVB-C 3101 USB2.0," - " TeVii S600, S630, S650, S660, S480," - " Prof 1100, 7500 USB2.0," - " Geniatech SU3000 devices"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dw2102.h b/drivers/media/dvb/dvb-usb/dw2102.h deleted file mode 100644 index 5cd0b0eb6ce1..000000000000 --- a/drivers/media/dvb/dvb-usb/dw2102.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _DW2102_H_ -#define _DW2102_H_ - -#define DVB_USB_LOG_PREFIX "dw2102" -#include "dvb-usb.h" - -#define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args) -#define deb_rc(args...) dprintk(dvb_usb_dw2102_debug, 0x04, args) -#endif diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c deleted file mode 100644 index 90a70c66a96e..000000000000 --- a/drivers/media/dvb/dvb-usb/friio-fe.c +++ /dev/null @@ -1,473 +0,0 @@ -/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. - * - * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> - * - * This module is based off the the gl861 and vp702x modules. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include <linux/init.h> -#include <linux/string.h> -#include <linux/slab.h> - -#include "friio.h" - -struct jdvbt90502_state { - struct i2c_adapter *i2c; - struct dvb_frontend frontend; - struct jdvbt90502_config config; -}; - -/* NOTE: TC90502 has 16bit register-address? */ -/* register 0x0100 is used for reading PLL status, so reg is u16 here */ -static int jdvbt90502_reg_read(struct jdvbt90502_state *state, - const u16 reg, u8 *buf, const size_t count) -{ - int ret; - u8 wbuf[3]; - struct i2c_msg msg[2]; - - wbuf[0] = reg & 0xFF; - wbuf[1] = 0; - wbuf[2] = reg >> 8; - - msg[0].addr = state->config.demod_address; - msg[0].flags = 0; - msg[0].buf = wbuf; - msg[0].len = sizeof(wbuf); - - msg[1].addr = msg[0].addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; - - ret = i2c_transfer(state->i2c, msg, 2); - if (ret != 2) { - deb_fe(" reg read failed.\n"); - return -EREMOTEIO; - } - return 0; -} - -/* currently 16bit register-address is not used, so reg is u8 here */ -static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state, - const u8 reg, const u8 val) -{ - struct i2c_msg msg; - u8 wbuf[2]; - - wbuf[0] = reg; - wbuf[1] = val; - - msg.addr = state->config.demod_address; - msg.flags = 0; - msg.buf = wbuf; - msg.len = sizeof(wbuf); - - if (i2c_transfer(state->i2c, &msg, 1) != 1) { - deb_fe(" reg write failed."); - return -EREMOTEIO; - } - return 0; -} - -static int _jdvbt90502_write(struct dvb_frontend *fe, const u8 buf[], int len) -{ - struct jdvbt90502_state *state = fe->demodulator_priv; - int err, i; - for (i = 0; i < len - 1; i++) { - err = jdvbt90502_single_reg_write(state, - buf[0] + i, buf[i + 1]); - if (err) - return err; - } - - return 0; -} - -/* read pll status byte via the demodulator's I2C register */ -/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */ -static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result) -{ - int ret; - - /* +1 for reading */ - u8 pll_addr_byte = (state->config.pll_address << 1) + 1; - - *result = 0; - - ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG, - pll_addr_byte); - if (ret) - goto error; - - ret = jdvbt90502_reg_read(state, 0x0100, result, 1); - if (ret) - goto error; - - deb_fe("PLL read val:%02x\n", *result); - return 0; - -error: - deb_fe("%s:ret == %d\n", __func__, ret); - return -EREMOTEIO; -} - - -/* set pll frequency via the demodulator's I2C register */ -static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq) -{ - int ret; - int retry; - u8 res1; - u8 res2[9]; - - u8 pll_freq_cmd[PLL_CMD_LEN]; - u8 pll_agc_cmd[PLL_CMD_LEN]; - struct i2c_msg msg[2]; - u32 f; - - deb_fe("%s: freq=%d, step=%d\n", __func__, freq, - state->frontend.ops.info.frequency_stepsize); - /* freq -> oscilator frequency conversion. */ - /* freq: 473,000,000 + n*6,000,000 [+ 142857 (center freq. shift)] */ - f = freq / state->frontend.ops.info.frequency_stepsize; - /* add 399[1/7 MHZ] = 57MHz for the IF */ - f += 399; - /* add center frequency shift if necessary */ - if (f % 7 == 0) - f++; - pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */ - pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1; - pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F; - pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF; - pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */ - pll_freq_cmd[BANDSWITCH_BYTE] = 0x08; /* UHF band */ - - msg[0].addr = state->config.demod_address; - msg[0].flags = 0; - msg[0].buf = pll_freq_cmd; - msg[0].len = sizeof(pll_freq_cmd); - - ret = i2c_transfer(state->i2c, &msg[0], 1); - if (ret != 1) - goto error; - - udelay(50); - - pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG]; - pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE]; - pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1]; - pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2]; - pll_agc_cmd[CONTROL_BYTE] = 0x9A; /* AGC_CTRL instead of BANDSWITCH */ - pll_agc_cmd[AGC_CTRL_BYTE] = 0x50; - /* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */ - - msg[1].addr = msg[0].addr; - msg[1].flags = 0; - msg[1].buf = pll_agc_cmd; - msg[1].len = sizeof(pll_agc_cmd); - - ret = i2c_transfer(state->i2c, &msg[1], 1); - if (ret != 1) - goto error; - - /* I don't know what these cmds are for, */ - /* but the USB log on a windows box contains them */ - ret = jdvbt90502_single_reg_write(state, 0x01, 0x40); - ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00); - if (ret) - goto error; - udelay(100); - - /* wait for the demod to be ready? */ -#define RETRY_COUNT 5 - for (retry = 0; retry < RETRY_COUNT; retry++) { - ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1); - if (ret) - goto error; - /* if (res1 != 0x00) goto error; */ - ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2)); - if (ret) - goto error; - if (res2[0] >= 0xA7) - break; - msleep(100); - } - if (retry >= RETRY_COUNT) { - deb_fe("%s: FE does not get ready after freq setting.\n", - __func__); - return -EREMOTEIO; - } - - return 0; -error: - deb_fe("%s:ret == %d\n", __func__, ret); - return -EREMOTEIO; -} - -static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state) -{ - u8 result; - int ret; - - *state = FE_HAS_SIGNAL; - - ret = jdvbt90502_pll_read(fe->demodulator_priv, &result); - if (ret) { - deb_fe("%s:ret == %d\n", __func__, ret); - return -EREMOTEIO; - } - - *state = FE_HAS_SIGNAL - | FE_HAS_CARRIER - | FE_HAS_VITERBI - | FE_HAS_SYNC; - - if (result & PLL_STATUS_LOCKED) - *state |= FE_HAS_LOCK; - - return 0; -} - -static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe, - u16 *strength) -{ - int ret; - u8 rbuf[37]; - - *strength = 0; - - /* status register (incl. signal strength) : 0x89 */ - /* TODO: read just the necessary registers [0x8B..0x8D]? */ - ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089, - rbuf, sizeof(rbuf)); - - if (ret) { - deb_fe("%s:ret == %d\n", __func__, ret); - return -EREMOTEIO; - } - - /* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */ - *strength = (rbuf[3] << 8) + rbuf[4]; - if (rbuf[2]) - *strength = 0xffff; - - return 0; -} - - -/* filter out un-supported properties to notify users */ -static int jdvbt90502_set_property(struct dvb_frontend *fe, - struct dtv_property *tvp) -{ - int r = 0; - - switch (tvp->cmd) { - case DTV_DELIVERY_SYSTEM: - if (tvp->u.data != SYS_ISDBT) - r = -EINVAL; - break; - case DTV_CLEAR: - case DTV_TUNE: - case DTV_FREQUENCY: - break; - default: - r = -EINVAL; - } - return r; -} - -static int jdvbt90502_get_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - p->inversion = INVERSION_AUTO; - p->bandwidth_hz = 6000000; - p->code_rate_HP = FEC_AUTO; - p->code_rate_LP = FEC_AUTO; - p->modulation = QAM_64; - p->transmission_mode = TRANSMISSION_MODE_AUTO; - p->guard_interval = GUARD_INTERVAL_AUTO; - p->hierarchy = HIERARCHY_AUTO; - return 0; -} - -static int jdvbt90502_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - - /** - * NOTE: ignore all the parameters except frequency. - * others should be fixed to the proper value for ISDB-T, - * but don't check here. - */ - - struct jdvbt90502_state *state = fe->demodulator_priv; - int ret; - - deb_fe("%s: Freq:%d\n", __func__, p->frequency); - - /* for recovery from DTV_CLEAN */ - fe->dtv_property_cache.delivery_system = SYS_ISDBT; - - ret = jdvbt90502_pll_set_freq(state, p->frequency); - if (ret) { - deb_fe("%s:ret == %d\n", __func__, ret); - return -EREMOTEIO; - } - - return 0; -} - - -/** - * (reg, val) commad list to initialize this module. - * captured on a Windows box. - */ -static u8 init_code[][2] = { - {0x01, 0x40}, - {0x04, 0x38}, - {0x05, 0x40}, - {0x07, 0x40}, - {0x0F, 0x4F}, - {0x11, 0x21}, - {0x12, 0x0B}, - {0x13, 0x2F}, - {0x14, 0x31}, - {0x16, 0x02}, - {0x21, 0xC4}, - {0x22, 0x20}, - {0x2C, 0x79}, - {0x2D, 0x34}, - {0x2F, 0x00}, - {0x30, 0x28}, - {0x31, 0x31}, - {0x32, 0xDF}, - {0x38, 0x01}, - {0x39, 0x78}, - {0x3B, 0x33}, - {0x3C, 0x33}, - {0x48, 0x90}, - {0x51, 0x68}, - {0x5E, 0x38}, - {0x71, 0x00}, - {0x72, 0x08}, - {0x77, 0x00}, - {0xC0, 0x21}, - {0xC1, 0x10}, - {0xE4, 0x1A}, - {0xEA, 0x1F}, - {0x77, 0x00}, - {0x71, 0x00}, - {0x71, 0x00}, - {0x76, 0x0C}, -}; - -static const int init_code_len = sizeof(init_code) / sizeof(u8[2]); - -static int jdvbt90502_init(struct dvb_frontend *fe) -{ - int i = -1; - int ret; - struct i2c_msg msg; - - struct jdvbt90502_state *state = fe->demodulator_priv; - - deb_fe("%s called.\n", __func__); - - msg.addr = state->config.demod_address; - msg.flags = 0; - msg.len = 2; - for (i = 0; i < init_code_len; i++) { - msg.buf = init_code[i]; - ret = i2c_transfer(state->i2c, &msg, 1); - if (ret != 1) - goto error; - } - fe->dtv_property_cache.delivery_system = SYS_ISDBT; - msleep(100); - - return 0; - -error: - deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret); - return -EREMOTEIO; -} - - -static void jdvbt90502_release(struct dvb_frontend *fe) -{ - struct jdvbt90502_state *state = fe->demodulator_priv; - kfree(state); -} - - -static struct dvb_frontend_ops jdvbt90502_ops; - -struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d) -{ - struct jdvbt90502_state *state = NULL; - - deb_info("%s called.\n", __func__); - - /* allocate memory for the internal state */ - state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL); - if (state == NULL) - goto error; - - /* setup the state */ - state->i2c = &d->i2c_adap; - memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config)); - - /* create dvb_frontend */ - memcpy(&state->frontend.ops, &jdvbt90502_ops, - sizeof(jdvbt90502_ops)); - state->frontend.demodulator_priv = state; - - if (jdvbt90502_init(&state->frontend) < 0) - goto error; - - return &state->frontend; - -error: - kfree(state); - return NULL; -} - -static struct dvb_frontend_ops jdvbt90502_ops = { - .delsys = { SYS_ISDBT }, - .info = { - .name = "Comtech JDVBT90502 ISDB-T", - .frequency_min = 473000000, /* UHF 13ch, center */ - .frequency_max = 767142857, /* UHF 62ch, center */ - .frequency_stepsize = JDVBT90502_PLL_CLK / JDVBT90502_PLL_DIVIDER, - .frequency_tolerance = 0, - - /* NOTE: this driver ignores all parameters but frequency. */ - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | - FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | - FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = jdvbt90502_release, - - .init = jdvbt90502_init, - .write = _jdvbt90502_write, - - .set_property = jdvbt90502_set_property, - - .set_frontend = jdvbt90502_set_frontend, - .get_frontend = jdvbt90502_get_frontend, - - .read_status = jdvbt90502_read_status, - .read_signal_strength = jdvbt90502_read_signal_strength, -}; diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c deleted file mode 100644 index 474a17e4db0c..000000000000 --- a/drivers/media/dvb/dvb-usb/friio.c +++ /dev/null @@ -1,522 +0,0 @@ -/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. - * - * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> - * - * This module is based off the the gl861 and vp702x modules. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "friio.h" - -/* debug */ -int dvb_usb_friio_debug; -module_param_named(debug, dvb_usb_friio_debug, int, 0644); -MODULE_PARM_DESC(debug, - "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))." - DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -/** - * Indirect I2C access to the PLL via FE. - * whole I2C protocol data to the PLL is sent via the FE's I2C register. - * This is done by a control msg to the FE with the I2C data accompanied, and - * a specific USB request number is assigned for that purpose. - * - * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE). - * TODO: refoctored, smarter i2c functions. - */ -static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */ - u16 value = addr << (8 + 1); - int wo = (rbuf == NULL || rlen == 0); /* write only */ - u8 req, type; - - deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n", - wbuf[1], wbuf[0], wlen - 1); - - if (wo && wlen >= 2) { - req = GL861_REQ_I2C_DATA_CTRL_WRITE; - type = GL861_WRITE; - udelay(20); - return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), - req, type, value, index, - &wbuf[1], wlen - 1, 2000); - } - - deb_xfer("not supported ctrl-msg, aborting."); - return -EINVAL; -} - -/* normal I2C access (without extra data arguments). - * write to the register wbuf[0] at I2C address addr with the value wbuf[1], - * or read from the register wbuf[0]. - * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3 - */ -static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, - u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) -{ - u16 index; - u16 value = addr << (8 + 1); - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 req, type; - unsigned int pipe; - - /* special case for the indirect I2C access to the PLL via FE, */ - if (addr == friio_fe_config.demod_address && - wbuf[0] == JDVBT90502_2ND_I2C_REG) - return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen); - - if (wo) { - req = GL861_REQ_I2C_WRITE; - type = GL861_WRITE; - pipe = usb_sndctrlpipe(d->udev, 0); - } else { /* rw */ - req = GL861_REQ_I2C_READ; - type = GL861_READ; - pipe = usb_rcvctrlpipe(d->udev, 0); - } - - switch (wlen) { - case 1: - index = wbuf[0]; - break; - case 2: - index = wbuf[0]; - value = value + wbuf[1]; - break; - case 3: - /* special case for 16bit register-address */ - index = (wbuf[2] << 8) | wbuf[0]; - value = value + wbuf[1]; - break; - default: - deb_xfer("wlen = %x, aborting.", wlen); - return -EINVAL; - } - msleep(1); - return usb_control_msg(d->udev, pipe, req, type, - value, index, rbuf, rlen, 2000); -} - -/* I2C */ -static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i; - - - if (num > 2) - return -EINVAL; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - /* write/read request */ - if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { - if (gl861_i2c_msg(d, msg[i].addr, - msg[i].buf, msg[i].len, - msg[i + 1].buf, msg[i + 1].len) < 0) - break; - i++; - } else - if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, NULL, 0) < 0) - break; - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 gl861_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static int friio_ext_ctl(struct dvb_usb_adapter *adap, - u32 sat_color, int lnb_on) -{ - int i; - int ret; - struct i2c_msg msg; - u8 *buf; - u32 mask; - u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0; - - buf = kmalloc(2, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - msg.addr = 0x00; - msg.flags = 0; - msg.len = 2; - msg.buf = buf; - - buf[0] = 0x00; - - /* send 2bit header (&B10) */ - buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE; - ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - buf[1] |= FRIIO_CTL_CLK; - ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - - buf[1] = lnb | FRIIO_CTL_STROBE; - ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - buf[1] |= FRIIO_CTL_CLK; - ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - - /* send 32bit(satur, R, G, B) data in serial */ - mask = 1 << 31; - for (i = 0; i < 32; i++) { - buf[1] = lnb | FRIIO_CTL_STROBE; - if (sat_color & mask) - buf[1] |= FRIIO_CTL_LED; - ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - buf[1] |= FRIIO_CTL_CLK; - ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - mask >>= 1; - } - - /* set the strobe off */ - buf[1] = lnb; - ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - buf[1] |= FRIIO_CTL_CLK; - ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); - - kfree(buf); - return (ret == 70); -} - - -static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); - -/* TODO: move these init cmds to the FE's init routine? */ -static u8 streaming_init_cmds[][2] = { - {0x33, 0x08}, - {0x37, 0x40}, - {0x3A, 0x1F}, - {0x3B, 0xFF}, - {0x3C, 0x1F}, - {0x3D, 0xFF}, - {0x38, 0x00}, - {0x35, 0x00}, - {0x39, 0x00}, - {0x36, 0x00}, -}; -static int cmdlen = sizeof(streaming_init_cmds) / 2; - -/* - * Command sequence in this init function is a replay - * of the captured USB commands from the Windows proprietary driver. - */ -static int friio_initialize(struct dvb_usb_device *d) -{ - int ret; - int i; - int retry = 0; - u8 *rbuf, *wbuf; - - deb_info("%s called.\n", __func__); - - wbuf = kmalloc(3, GFP_KERNEL); - if (!wbuf) - return -ENOMEM; - - rbuf = kmalloc(2, GFP_KERNEL); - if (!rbuf) { - kfree(wbuf); - return -ENOMEM; - } - - /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */ - /* because the i2c device is not set up yet. */ - wbuf[0] = 0x11; - wbuf[1] = 0x02; - ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); - if (ret < 0) - goto error; - msleep(2); - - wbuf[0] = 0x11; - wbuf[1] = 0x00; - ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); - if (ret < 0) - goto error; - msleep(1); - - /* following msgs should be in the FE's init code? */ - /* cmd sequence to identify the device type? (friio black/white) */ - wbuf[0] = 0x03; - wbuf[1] = 0x80; - /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */ - ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), - GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, - 0x1200, 0x0100, wbuf, 2, 2000); - if (ret < 0) - goto error; - - msleep(2); - wbuf[0] = 0x00; - wbuf[2] = 0x01; /* reg.0x0100 */ - wbuf[1] = 0x00; - ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2); - /* my Friio White returns 0xffff. */ - if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) - goto error; - - msleep(2); - wbuf[0] = 0x03; - wbuf[1] = 0x80; - ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), - GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, - 0x9000, 0x0100, wbuf, 2, 2000); - if (ret < 0) - goto error; - - msleep(2); - wbuf[0] = 0x00; - wbuf[2] = 0x01; /* reg.0x0100 */ - wbuf[1] = 0x00; - ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2); - /* my Friio White returns 0xffff again. */ - if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) - goto error; - - msleep(1); - -restart: - /* ============ start DEMOD init cmds ================== */ - /* read PLL status to clear the POR bit */ - wbuf[0] = JDVBT90502_2ND_I2C_REG; - wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */ - ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0); - if (ret < 0) - goto error; - - msleep(5); - /* note: DEMODULATOR has 16bit register-address. */ - wbuf[0] = 0x00; - wbuf[2] = 0x01; /* reg addr: 0x0100 */ - wbuf[1] = 0x00; /* val: not used */ - ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1); - if (ret < 0) - goto error; -/* - msleep(1); - wbuf[0] = 0x80; - wbuf[1] = 0x00; - ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1); - if (ret < 0) - goto error; - */ - if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */ - if (++retry > 3) { - deb_info("failed to get the correct" - " FE demod status:0x%02x\n", rbuf[0]); - goto error; - } - msleep(100); - goto restart; - } - - /* TODO: check return value in rbuf */ - /* =========== end DEMOD init cmds ===================== */ - msleep(1); - - wbuf[0] = 0x30; - wbuf[1] = 0x04; - ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); - if (ret < 0) - goto error; - - msleep(2); - /* following 2 cmds unnecessary? */ - wbuf[0] = 0x00; - wbuf[1] = 0x01; - ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); - if (ret < 0) - goto error; - - wbuf[0] = 0x06; - wbuf[1] = 0x0F; - ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); - if (ret < 0) - goto error; - - /* some streaming ctl cmds (maybe) */ - msleep(10); - for (i = 0; i < cmdlen; i++) { - ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2, - NULL, 0); - if (ret < 0) - goto error; - msleep(1); - } - msleep(20); - - /* change the LED color etc. */ - ret = friio_streaming_ctrl(&d->adapter[0], 0); - if (ret < 0) - goto error; - - return 0; - -error: - kfree(wbuf); - kfree(rbuf); - deb_info("%s:ret == %d\n", __func__, ret); - return -EIO; -} - -/* Callbacks for DVB USB */ - -static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - int ret; - - deb_info("%s called.(%d)\n", __func__, onoff); - - /* set the LED color and saturation (and LNB on) */ - if (onoff) - ret = friio_ext_ctl(adap, 0x6400ff64, 1); - else - ret = friio_ext_ctl(adap, 0x96ff00ff, 1); - - if (ret != 1) { - deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret); - return -EREMOTEIO; - } - return 0; -} - -static int friio_frontend_attach(struct dvb_usb_adapter *adap) -{ - if (friio_initialize(adap->dev) < 0) - return -EIO; - - adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev); - if (adap->fe_adap[0].fe == NULL) - return -EIO; - - return 0; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties friio_properties; - -static int friio_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct dvb_usb_device *d; - struct usb_host_interface *alt; - int ret; - - if (intf->num_altsetting < GL861_ALTSETTING_COUNT) - return -ENODEV; - - alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING); - if (alt == NULL) { - deb_rc("not alt found!\n"); - return -ENODEV; - } - ret = usb_set_interface(interface_to_usbdev(intf), - alt->desc.bInterfaceNumber, - alt->desc.bAlternateSetting); - if (ret != 0) { - deb_rc("failed to set alt-setting!\n"); - return ret; - } - - ret = dvb_usb_device_init(intf, &friio_properties, - THIS_MODULE, &d, adapter_nr); - if (ret == 0) - friio_streaming_ctrl(&d->adapter[0], 1); - - return ret; -} - - -struct jdvbt90502_config friio_fe_config = { - .demod_address = FRIIO_DEMOD_ADDR, - .pll_address = FRIIO_PLL_ADDR, -}; - -static struct i2c_algorithm gl861_i2c_algo = { - .master_xfer = gl861_i2c_xfer, - .functionality = gl861_i2c_func, -}; - -static struct usb_device_id friio_table[] = { - { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, friio_table); - - -static struct dvb_usb_device_properties friio_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = DEVICE_SPECIFIC, - - .size_of_priv = 0, - - .num_adapters = 1, - .adapter = { - /* caps:0 => no pid filter, 188B TS packet */ - /* GL861 has a HW pid filter, but no info available. */ - { - .num_frontends = 1, - .fe = {{ - .caps = 0, - - .frontend_attach = friio_frontend_attach, - .streaming_ctrl = friio_streaming_ctrl, - - .stream = { - .type = USB_BULK, - /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */ - .count = 8, - .endpoint = 0x01, - .u = { - /* GL861 has 6KB buf inside */ - .bulk = { - .buffersize = 16384, - } - } - }, - }}, - } - }, - .i2c_algo = &gl861_i2c_algo, - - .num_device_descs = 1, - .devices = { - { - .name = "774 Friio ISDB-T USB2.0", - .cold_ids = { NULL }, - .warm_ids = { &friio_table[0], NULL }, - }, - } -}; - -static struct usb_driver friio_driver = { - .name = "dvb_usb_friio", - .probe = friio_probe, - .disconnect = dvb_usb_device_exit, - .id_table = friio_table, -}; - -module_usb_driver(friio_driver); - -MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>"); -MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver"); -MODULE_VERSION("0.2"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h deleted file mode 100644 index 0f461ca10cb9..000000000000 --- a/drivers/media/dvb/dvb-usb/friio.h +++ /dev/null @@ -1,99 +0,0 @@ -/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. - * - * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> - * - * This module is based off the the gl861 and vp702x modules. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_FRIIO_H_ -#define _DVB_USB_FRIIO_H_ - -/** - * Friio Components - * USB hub: AU4254 - * USB controller(+ TS dmx & streaming): GL861 - * Frontend: comtech JDVBT-90502 - * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1)) - * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1)) - * LED x3 (+LNB) control: PIC 16F676 - * EEPROM: 24C08 - * - * (USB smart card reader: AU9522) - * - */ - -#define DVB_USB_LOG_PREFIX "friio" -#include "dvb-usb.h" - -extern int dvb_usb_friio_debug; -#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args) -#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args) -#define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args) -#define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args) - -/* Vendor requests */ -#define GL861_WRITE 0x40 -#define GL861_READ 0xc0 - -/* command bytes */ -#define GL861_REQ_I2C_WRITE 0x01 -#define GL861_REQ_I2C_READ 0x02 -/* For control msg with data argument */ -/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */ -#define GL861_REQ_I2C_DATA_CTRL_WRITE 0x03 - -#define GL861_ALTSETTING_COUNT 2 -#define FRIIO_BULK_ALTSETTING 0 -#define FRIIO_ISOC_ALTSETTING 1 - -/* LED & LNB control via PIC. */ -/* basically, it's serial control with clock and strobe. */ -/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */ -/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/ -#define FRIIO_CTL_LNB (1 << 0) -#define FRIIO_CTL_STROBE (1 << 1) -#define FRIIO_CTL_CLK (1 << 2) -#define FRIIO_CTL_LED (1 << 3) - -/* Front End related */ - -#define FRIIO_DEMOD_ADDR (0x30 >> 1) -#define FRIIO_PLL_ADDR (0xC0 >> 1) - -#define JDVBT90502_PLL_CLK 4000000 -#define JDVBT90502_PLL_DIVIDER 28 - -#define JDVBT90502_2ND_I2C_REG 0xFE - -/* byte index for pll i2c command data structure*/ -/* see datasheet for tua6034 */ -#define DEMOD_REDIRECT_REG 0 -#define ADDRESS_BYTE 1 -#define DIVIDER_BYTE1 2 -#define DIVIDER_BYTE2 3 -#define CONTROL_BYTE 4 -#define BANDSWITCH_BYTE 5 -#define AGC_CTRL_BYTE 5 -#define PLL_CMD_LEN 6 - -/* bit masks for PLL STATUS response */ -#define PLL_STATUS_POR_MODE 0x80 /* 1: Power on Reset (test) Mode */ -#define PLL_STATUS_LOCKED 0x40 /* 1: locked */ -#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */ -#define PLL_STATUS_TESTMODE 0x07 /* digital output level (5 level) */ - /* 0.15Vcc step 0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */ - - -struct jdvbt90502_config { - u8 demod_address; /* i2c addr for demodulator IC */ - u8 pll_address; /* PLL addr on the secondary i2c*/ -}; -extern struct jdvbt90502_config friio_fe_config; - -extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d); -#endif diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c deleted file mode 100644 index 67957dd99ede..000000000000 --- a/drivers/media/dvb/dvb-usb/gp8psk-fe.c +++ /dev/null @@ -1,369 +0,0 @@ -/* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module - * - * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) - * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) - * - * Thanks to GENPIX for the sample code used to implement this module. - * - * This module is based off the vp7045 and vp702x modules - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "gp8psk.h" - -struct gp8psk_fe_state { - struct dvb_frontend fe; - struct dvb_usb_device *d; - u8 lock; - u16 snr; - unsigned long next_status_check; - unsigned long status_check_interval; -}; - -static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - u8 status; - gp8psk_usb_in_op(st->d, GET_8PSK_CONFIG, 0, 0, &status, 1); - return status & bmDCtuned; -} - -static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode) -{ - struct gp8psk_fe_state *state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, SET_8PSK_CONFIG, mode, 0, NULL, 0); -} - -static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) -{ - u8 buf[6]; - if (time_after(jiffies,st->next_status_check)) { - gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1); - gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6); - st->snr = (buf[1]) << 8 | buf[0]; - st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; - } - return 0; -} - -static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - gp8psk_fe_update_status(st); - - if (st->lock) - *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; - else - *status = 0; - - if (*status & FE_HAS_LOCK) - st->status_check_interval = 1000; - else - st->status_check_interval = 100; - return 0; -} - -/* not supported by this Frontend */ -static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber) -{ - (void) fe; - *ber = 0; - return 0; -} - -/* not supported by this Frontend */ -static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) -{ - (void) fe; - *unc = 0; - return 0; -} - -static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - gp8psk_fe_update_status(st); - /* snr is reported in dBu*256 */ - *snr = st->snr; - return 0; -} - -static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - gp8psk_fe_update_status(st); - /* snr is reported in dBu*256 */ - /* snr / 38.4 ~= 100% strength */ - /* snr * 17 returns 100% strength as 65535 */ - if (st->snr > 0xf00) - *strength = 0xffff; - else - *strength = (st->snr << 4) + st->snr; /* snr*17 */ - return 0; -} - -static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) -{ - tune->min_delay_ms = 800; - return 0; -} - -static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) -{ - struct gp8psk_fe_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - u8 cmd[10]; - u32 freq = c->frequency * 1000; - int gp_product_id = le16_to_cpu(state->d->udev->descriptor.idProduct); - - deb_fe("%s()\n", __func__); - - cmd[4] = freq & 0xff; - cmd[5] = (freq >> 8) & 0xff; - cmd[6] = (freq >> 16) & 0xff; - cmd[7] = (freq >> 24) & 0xff; - - /* backwards compatibility: DVB-S + 8-PSK were used for Turbo-FEC */ - if (c->delivery_system == SYS_DVBS && c->modulation == PSK_8) - c->delivery_system = SYS_TURBO; - - switch (c->delivery_system) { - case SYS_DVBS: - if (c->modulation != QPSK) { - deb_fe("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } - c->fec_inner = FEC_AUTO; - break; - case SYS_DVBS2: /* kept for backwards compatibility */ - deb_fe("%s: DVB-S2 delivery system selected\n", __func__); - break; - case SYS_TURBO: - deb_fe("%s: Turbo-FEC delivery system selected\n", __func__); - break; - - default: - deb_fe("%s: unsupported delivery system selected (%d)\n", - __func__, c->delivery_system); - return -EOPNOTSUPP; - } - - cmd[0] = c->symbol_rate & 0xff; - cmd[1] = (c->symbol_rate >> 8) & 0xff; - cmd[2] = (c->symbol_rate >> 16) & 0xff; - cmd[3] = (c->symbol_rate >> 24) & 0xff; - switch (c->modulation) { - case QPSK: - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) - if (gp8psk_tuned_to_DCII(fe)) - gp8psk_bcm4500_reload(state->d); - switch (c->fec_inner) { - case FEC_1_2: - cmd[9] = 0; break; - case FEC_2_3: - cmd[9] = 1; break; - case FEC_3_4: - cmd[9] = 2; break; - case FEC_5_6: - cmd[9] = 3; break; - case FEC_7_8: - cmd[9] = 4; break; - case FEC_AUTO: - cmd[9] = 5; break; - default: - cmd[9] = 5; break; - } - if (c->delivery_system == SYS_TURBO) - cmd[8] = ADV_MOD_TURBO_QPSK; - else - cmd[8] = ADV_MOD_DVB_QPSK; - break; - case PSK_8: /* PSK_8 is for compatibility with DN */ - cmd[8] = ADV_MOD_TURBO_8PSK; - switch (c->fec_inner) { - case FEC_2_3: - cmd[9] = 0; break; - case FEC_3_4: - cmd[9] = 1; break; - case FEC_3_5: - cmd[9] = 2; break; - case FEC_5_6: - cmd[9] = 3; break; - case FEC_8_9: - cmd[9] = 4; break; - default: - cmd[9] = 0; break; - } - break; - case QAM_16: /* QAM_16 is for compatibility with DN */ - cmd[8] = ADV_MOD_TURBO_16QAM; - cmd[9] = 0; - break; - default: /* Unknown modulation */ - deb_fe("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } - - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) - gp8psk_set_tuner_mode(fe, 0); - gp8psk_usb_out_op(state->d, TUNE_8PSK, 0, 0, cmd, 10); - - state->lock = 0; - state->next_status_check = jiffies; - state->status_check_interval = 200; - - return 0; -} - -static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, - struct dvb_diseqc_master_cmd *m) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - - deb_fe("%s\n",__func__); - - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, - m->msg, m->msg_len)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe, - fe_sec_mini_cmd_t burst) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - u8 cmd; - - deb_fe("%s\n",__func__); - - /* These commands are certainly wrong */ - cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; - - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0, - &cmd, 0)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - - if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE, - (tone == SEC_TONE_ON), 0, NULL, 0)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, - voltage == SEC_VOLTAGE_18, 0, NULL, 0)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0); -} - -static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - u8 cmd = sw_cmd & 0x7f; - - if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0, - NULL, 0)) { - return -EINVAL; - } - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), - 0, NULL, 0)) { - return -EINVAL; - } - - return 0; -} - -static void gp8psk_fe_release(struct dvb_frontend* fe) -{ - struct gp8psk_fe_state *state = fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops gp8psk_fe_ops; - -struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d) -{ - struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); - if (s == NULL) - goto error; - - s->d = d; - memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); - s->fe.demodulator_priv = s; - - goto success; -error: - return NULL; -success: - return &s->fe; -} - - -static struct dvb_frontend_ops gp8psk_fe_ops = { - .delsys = { SYS_DVBS }, - .info = { - .name = "Genpix DVB-S", - .frequency_min = 800000, - .frequency_max = 2250000, - .frequency_stepsize = 100, - .symbol_rate_min = 1000000, - .symbol_rate_max = 45000000, - .symbol_rate_tolerance = 500, /* ppm */ - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - /* - * FE_CAN_QAM_16 is for compatibility - * (Myth incorrectly detects Turbo-QPSK as plain QAM-16) - */ - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_TURBO_FEC - }, - - .release = gp8psk_fe_release, - - .init = NULL, - .sleep = NULL, - - .set_frontend = gp8psk_fe_set_frontend, - - .get_tune_settings = gp8psk_fe_get_tune_settings, - - .read_status = gp8psk_fe_read_status, - .read_ber = gp8psk_fe_read_ber, - .read_signal_strength = gp8psk_fe_read_signal_strength, - .read_snr = gp8psk_fe_read_snr, - .read_ucblocks = gp8psk_fe_read_unc_blocks, - - .diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg, - .diseqc_send_burst = gp8psk_fe_send_diseqc_burst, - .set_tone = gp8psk_fe_set_tone, - .set_voltage = gp8psk_fe_set_voltage, - .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, - .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage -}; diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c deleted file mode 100644 index 5d0384dd45b5..000000000000 --- a/drivers/media/dvb/dvb-usb/gp8psk.c +++ /dev/null @@ -1,328 +0,0 @@ -/* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module - * - * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) - * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) - * - * Thanks to GENPIX for the sample code used to implement this module. - * - * This module is based off the vp7045 and vp702x modules - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "gp8psk.h" - -/* debug */ -static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw"; -int dvb_usb_gp8psk_debug; -module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) -{ - return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6)); -} - -static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) -{ - return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1)); -} - -static void gp8psk_info(struct dvb_usb_device *d) -{ - u8 fpga_vers, fw_vers[6]; - - if (!gp8psk_get_fw_version(d, fw_vers)) - info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", - fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), - 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); - else - info("failed to get FW version"); - - if (!gp8psk_get_fpga_version(d, &fpga_vers)) - info("FPGA Version = %i", fpga_vers); - else - info("failed to get FPGA version"); -} - -int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) -{ - int ret = 0,try = 0; - - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) - return ret; - - while (ret >= 0 && ret != blen && try < 3) { - ret = usb_control_msg(d->udev, - usb_rcvctrlpipe(d->udev,0), - req, - USB_TYPE_VENDOR | USB_DIR_IN, - value,index,b,blen, - 2000); - deb_info("reading number %d (ret: %d)\n",try,ret); - try++; - } - - if (ret < 0 || ret != blen) { - warn("usb in %d operation failed.", req); - ret = -EIO; - } else - ret = 0; - - deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); - debug_dump(b,blen,deb_xfer); - - mutex_unlock(&d->usb_mutex); - - return ret; -} - -int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - int ret; - - deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); - debug_dump(b,blen,deb_xfer); - - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) - return ret; - - if (usb_control_msg(d->udev, - usb_sndctrlpipe(d->udev,0), - req, - USB_TYPE_VENDOR | USB_DIR_OUT, - value,index,b,blen, - 2000) != blen) { - warn("usb out operation failed."); - ret = -EIO; - } else - ret = 0; - mutex_unlock(&d->usb_mutex); - - return ret; -} - -static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) -{ - int ret; - const struct firmware *fw = NULL; - const u8 *ptr; - u8 *buf; - if ((ret = request_firmware(&fw, bcm4500_firmware, - &d->udev->dev)) != 0) { - err("did not find the bcm4500 firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", - bcm4500_firmware,ret); - return ret; - } - - ret = -EINVAL; - - if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) - goto out_rel_fw; - - info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware); - - ptr = fw->data; - buf = kmalloc(64, GFP_KERNEL | GFP_DMA); - if (!buf) { - ret = -ENOMEM; - goto out_rel_fw; - } - - while (ptr[0] != 0xff) { - u16 buflen = ptr[0] + 4; - if (ptr + buflen >= fw->data + fw->size) { - err("failed to load bcm4500 firmware."); - goto out_free; - } - memcpy(buf, ptr, buflen); - if (dvb_usb_generic_write(d, buf, buflen)) { - err("failed to load bcm4500 firmware."); - goto out_free; - } - ptr += buflen; - } - - ret = 0; - -out_free: - kfree(buf); -out_rel_fw: - release_firmware(fw); - - return ret; -} - -static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 status, buf; - int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); - - if (onoff) { - gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); - if (! (status & bm8pskStarted)) { /* started */ - if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) - gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0); - if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) - return -EINVAL; - gp8psk_info(d); - } - - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) - if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ - if(gp8psk_load_bcm4500fw(d)) - return -EINVAL; - - if (! (status & bmIntersilOn)) /* LNB Power */ - if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, - &buf, 1)) - return -EINVAL; - - /* Set DVB mode to 1 */ - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) - if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return -EINVAL; - /* Abort possible TS (if previous tune crashed) */ - if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return -EINVAL; - } else { - /* Turn off LNB power */ - if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return -EINVAL; - /* Turn off 8psk power */ - if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) - return -EINVAL; - if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) - gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0); - } - return 0; -} - -int gp8psk_bcm4500_reload(struct dvb_usb_device *d) -{ - u8 buf; - int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); - /* Turn off 8psk power */ - if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) - return -EINVAL; - /* Turn On 8psk power */ - if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) - return -EINVAL; - /* load BCM4500 firmware */ - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) - if (gp8psk_load_bcm4500fw(d)) - return -EINVAL; - return 0; -} - -static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0); -} - -static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap) -{ - adap->fe_adap[0].fe = gp8psk_fe_attach(adap->dev); - return 0; -} - -static struct dvb_usb_device_properties gp8psk_properties; - -static int gp8psk_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - int ret; - struct usb_device *udev = interface_to_usbdev(intf); - ret = dvb_usb_device_init(intf, &gp8psk_properties, - THIS_MODULE, NULL, adapter_nr); - if (ret == 0) { - info("found Genpix USB device pID = %x (hex)", - le16_to_cpu(udev->descriptor.idProduct)); - } - return ret; -} - -static struct usb_device_id gp8psk_usb_table [] = { - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_2) }, -/* { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */ - { 0 }, -}; -MODULE_DEVICE_TABLE(usb, gp8psk_usb_table); - -static struct dvb_usb_device_properties gp8psk_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-gp8psk-01.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = gp8psk_streaming_ctrl, - .frontend_attach = gp8psk_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - }}, - } - }, - .power_ctrl = gp8psk_power_ctrl, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 4, - .devices = { - { .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver", - .cold_ids = { &gp8psk_usb_table[0], NULL }, - .warm_ids = { &gp8psk_usb_table[1], NULL }, - }, - { .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver", - .cold_ids = { NULL }, - .warm_ids = { &gp8psk_usb_table[2], NULL }, - }, - { .name = "Genpix SkyWalker-1 DVB-S receiver", - .cold_ids = { NULL }, - .warm_ids = { &gp8psk_usb_table[3], NULL }, - }, - { .name = "Genpix SkyWalker-2 DVB-S receiver", - .cold_ids = { NULL }, - .warm_ids = { &gp8psk_usb_table[4], NULL }, - }, - { NULL }, - } -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver gp8psk_usb_driver = { - .name = "dvb_usb_gp8psk", - .probe = gp8psk_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = gp8psk_usb_table, -}; - -module_usb_driver(gp8psk_usb_driver); - -MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>"); -MODULE_DESCRIPTION("Driver for Genpix DVB-S"); -MODULE_VERSION("1.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h deleted file mode 100644 index ed32b9da4843..000000000000 --- a/drivers/media/dvb/dvb-usb/gp8psk.h +++ /dev/null @@ -1,100 +0,0 @@ -/* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module - * - * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) - * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) - * - * Thanks to GENPIX for the sample code used to implement this module. - * - * This module is based off the vp7045 and vp702x modules - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_GP8PSK_H_ -#define _DVB_USB_GP8PSK_H_ - -#define DVB_USB_LOG_PREFIX "gp8psk" -#include "dvb-usb.h" - -extern int dvb_usb_gp8psk_debug; -#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args) -#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args) -#define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args) -#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args) - -/* Twinhan Vendor requests */ -#define TH_COMMAND_IN 0xC0 -#define TH_COMMAND_OUT 0xC1 - -/* gp8psk commands */ - -#define GET_8PSK_CONFIG 0x80 /* in */ -#define SET_8PSK_CONFIG 0x81 -#define I2C_WRITE 0x83 -#define I2C_READ 0x84 -#define ARM_TRANSFER 0x85 -#define TUNE_8PSK 0x86 -#define GET_SIGNAL_STRENGTH 0x87 /* in */ -#define LOAD_BCM4500 0x88 -#define BOOT_8PSK 0x89 /* in */ -#define START_INTERSIL 0x8A /* in */ -#define SET_LNB_VOLTAGE 0x8B -#define SET_22KHZ_TONE 0x8C -#define SEND_DISEQC_COMMAND 0x8D -#define SET_DVB_MODE 0x8E -#define SET_DN_SWITCH 0x8F -#define GET_SIGNAL_LOCK 0x90 /* in */ -#define GET_FW_VERS 0x92 -#define GET_SERIAL_NUMBER 0x93 /* in */ -#define USE_EXTRA_VOLT 0x94 -#define GET_FPGA_VERS 0x95 -#define CW3K_INIT 0x9d - -/* PSK_configuration bits */ -#define bm8pskStarted 0x01 -#define bm8pskFW_Loaded 0x02 -#define bmIntersilOn 0x04 -#define bmDVBmode 0x08 -#define bm22kHz 0x10 -#define bmSEL18V 0x20 -#define bmDCtuned 0x40 -#define bmArmed 0x80 - -/* Satellite modulation modes */ -#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ -#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ -#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ -#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ - -#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ -#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ -#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ -#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ -#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ -#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ - -#define GET_USB_SPEED 0x07 - -#define RESET_FX2 0x13 - -#define FW_VERSION_READ 0x0B -#define VENDOR_STRING_READ 0x0C -#define PRODUCT_STRING_READ 0x0D -#define FW_BCD_VERSION_READ 0x14 - -/* firmware revision id's */ -#define GP8PSK_FW_REV1 0x020604 -#define GP8PSK_FW_REV2 0x020704 -#define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) - -extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); -extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); -extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen); -extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); - -#endif diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c deleted file mode 100644 index 288af29a8bb7..000000000000 --- a/drivers/media/dvb/dvb-usb/m920x.c +++ /dev/null @@ -1,1099 +0,0 @@ -/* DVB USB compliant linux driver for MSI Mega Sky 580 DVB-T USB2.0 receiver - * - * Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ - -#include "m920x.h" - -#include "mt352.h" -#include "mt352_priv.h" -#include "qt1010.h" -#include "tda1004x.h" -#include "tda827x.h" - -#include <media/tuner.h> -#include "tuner-simple.h" -#include <asm/unaligned.h> - -/* debug */ -static int dvb_usb_m920x_debug; -module_param_named(debug,dvb_usb_m920x_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid); - -static inline int m920x_read(struct usb_device *udev, u8 request, u16 value, - u16 index, void *data, int size) -{ - int ret; - - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - request, USB_TYPE_VENDOR | USB_DIR_IN, - value, index, data, size, 2000); - if (ret < 0) { - printk(KERN_INFO "m920x_read = error: %d\n", ret); - return ret; - } - - if (ret != size) { - deb("m920x_read = no data\n"); - return -EIO; - } - - return 0; -} - -static inline int m920x_write(struct usb_device *udev, u8 request, - u16 value, u16 index) -{ - int ret; - - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - request, USB_TYPE_VENDOR | USB_DIR_OUT, - value, index, NULL, 0, 2000); - - return ret; -} - -static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq) -{ - int ret = 0, i, epi, flags = 0; - int adap_enabled[M9206_MAX_ADAPTERS] = { 0 }; - - /* Remote controller init. */ - if (d->props.rc.legacy.rc_query) { - deb("Initialising remote control\n"); - while (rc_seq->address) { - if ((ret = m920x_write(d->udev, M9206_CORE, - rc_seq->data, - rc_seq->address)) != 0) { - deb("Initialising remote control failed\n"); - return ret; - } - - rc_seq++; - } - - deb("Initialising remote control success\n"); - } - - for (i = 0; i < d->props.num_adapters; i++) - flags |= d->adapter[i].props.fe[0].caps; - - /* Some devices(Dposh) might crash if we attempt touch at all. */ - if (flags & DVB_USB_ADAP_HAS_PID_FILTER) { - for (i = 0; i < d->props.num_adapters; i++) { - epi = d->adapter[i].props.fe[0].stream.endpoint - 0x81; - - if (epi < 0 || epi >= M9206_MAX_ADAPTERS) { - printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n"); - return -EINVAL; - } - - adap_enabled[epi] = 1; - } - - for (i = 0; i < M9206_MAX_ADAPTERS; i++) { - if (adap_enabled[i]) - continue; - - if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x0)) != 0) - return ret; - - if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x02f5)) != 0) - return ret; - } - } - - return ret; -} - -static int m920x_init_ep(struct usb_interface *intf) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_host_interface *alt; - - if ((alt = usb_altnum_to_altsetting(intf, 1)) == NULL) { - deb("No alt found!\n"); - return -ENODEV; - } - - return usb_set_interface(udev, alt->desc.bInterfaceNumber, - alt->desc.bAlternateSetting); -} - -static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - struct m920x_state *m = d->priv; - int i, ret = 0; - u8 *rc_state; - - rc_state = kmalloc(2, GFP_KERNEL); - if (!rc_state) - return -ENOMEM; - - if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0) - goto out; - - if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0) - goto out; - - for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) - if (rc5_data(&d->props.rc.legacy.rc_map_table[i]) == rc_state[1]) { - *event = d->props.rc.legacy.rc_map_table[i].keycode; - - switch(rc_state[0]) { - case 0x80: - *state = REMOTE_NO_KEY_PRESSED; - goto out; - - case 0x88: /* framing error or "invalid code" */ - case 0x99: - case 0xc0: - case 0xd8: - *state = REMOTE_NO_KEY_PRESSED; - m->rep_count = 0; - goto out; - - case 0x93: - case 0x92: - case 0x83: /* pinnacle PCTV310e */ - case 0x82: - m->rep_count = 0; - *state = REMOTE_KEY_PRESSED; - goto out; - - case 0x91: - case 0x81: /* pinnacle PCTV310e */ - /* prevent immediate auto-repeat */ - if (++m->rep_count > 2) - *state = REMOTE_KEY_REPEAT; - else - *state = REMOTE_NO_KEY_PRESSED; - goto out; - - default: - deb("Unexpected rc state %02x\n", rc_state[0]); - *state = REMOTE_NO_KEY_PRESSED; - goto out; - } - } - - if (rc_state[1] != 0) - deb("Unknown rc key %02x\n", rc_state[1]); - - *state = REMOTE_NO_KEY_PRESSED; - - out: - kfree(rc_state); - return ret; -} - -/* I2C */ -static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i, j; - int ret = 0; - - if (!num) - return -EINVAL; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) { - /* For a 0 byte message, I think sending the address - * to index 0x80|0x40 would be the correct thing to - * do. However, zero byte messages are only used for - * probing, and since we don't know how to get the - * slave's ack, we can't probe. */ - ret = -ENOTSUPP; - goto unlock; - } - /* Send START & address/RW bit */ - if (!(msg[i].flags & I2C_M_NOSTART)) { - if ((ret = m920x_write(d->udev, M9206_I2C, - (msg[i].addr << 1) | - (msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0) - goto unlock; - /* Should check for ack here, if we knew how. */ - } - if (msg[i].flags & I2C_M_RD) { - for (j = 0; j < msg[i].len; j++) { - /* Last byte of transaction? - * Send STOP, otherwise send ACK. */ - int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01; - - if ((ret = m920x_read(d->udev, M9206_I2C, 0x0, - 0x20 | stop, - &msg[i].buf[j], 1)) != 0) - goto unlock; - } - } else { - for (j = 0; j < msg[i].len; j++) { - /* Last byte of transaction? Then send STOP. */ - int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00; - - if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0) - goto unlock; - /* Should check for ack here too. */ - } - } - } - ret = num; - - unlock: - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static u32 m920x_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm m920x_i2c_algo = { - .master_xfer = m920x_i2c_xfer, - .functionality = m920x_i2c_func, -}; - -/* pid filter */ -static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid) -{ - int ret = 0; - - if (pid >= 0x8000) - return -EINVAL; - - pid |= 0x8000; - - if ((ret = m920x_write(d->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0) - return ret; - - if ((ret = m920x_write(d->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0) - return ret; - - return ret; -} - -static int m920x_update_filters(struct dvb_usb_adapter *adap) -{ - struct m920x_state *m = adap->dev->priv; - int enabled = m->filtering_enabled[adap->id]; - int i, ret = 0, filter = 0; - int ep = adap->props.fe[0].stream.endpoint; - - for (i = 0; i < M9206_MAX_FILTERS; i++) - if (m->filters[adap->id][i] == 8192) - enabled = 0; - - /* Disable all filters */ - if ((ret = m920x_set_filter(adap->dev, ep, 1, enabled)) != 0) - return ret; - - for (i = 0; i < M9206_MAX_FILTERS; i++) - if ((ret = m920x_set_filter(adap->dev, ep, i + 2, 0)) != 0) - return ret; - - /* Set */ - if (enabled) { - for (i = 0; i < M9206_MAX_FILTERS; i++) { - if (m->filters[adap->id][i] == 0) - continue; - - if ((ret = m920x_set_filter(adap->dev, ep, filter + 2, m->filters[adap->id][i])) != 0) - return ret; - - filter++; - } - } - - return ret; -} - -static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - struct m920x_state *m = adap->dev->priv; - - m->filtering_enabled[adap->id] = onoff ? 1 : 0; - - return m920x_update_filters(adap); -} - -static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) -{ - struct m920x_state *m = adap->dev->priv; - - m->filters[adap->id][index] = onoff ? pid : 0; - - return m920x_update_filters(adap); -} - -static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw) -{ - u16 value, index, size; - u8 *read, *buff; - int i, pass, ret = 0; - - buff = kmalloc(65536, GFP_KERNEL); - if (buff == NULL) - return -ENOMEM; - - read = kmalloc(4, GFP_KERNEL); - if (!read) { - kfree(buff); - return -ENOMEM; - } - - if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0) - goto done; - deb("%x %x %x %x\n", read[0], read[1], read[2], read[3]); - - if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0) - goto done; - deb("%x\n", read[0]); - - for (pass = 0; pass < 2; pass++) { - for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = get_unaligned_le16(fw->data + i); - i += sizeof(u16); - - index = get_unaligned_le16(fw->data + i); - i += sizeof(u16); - - size = get_unaligned_le16(fw->data + i); - i += sizeof(u16); - - if (pass == 1) { - /* Will stall if using fw->data ... */ - memcpy(buff, fw->data + i, size); - - ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0), - M9206_FW, - USB_TYPE_VENDOR | USB_DIR_OUT, - value, index, buff, size, 20); - if (ret != size) { - deb("error while uploading fw!\n"); - ret = -EIO; - goto done; - } - msleep(3); - } - i += size; - } - if (i != fw->size) { - deb("bad firmware file!\n"); - ret = -EINVAL; - goto done; - } - } - - msleep(36); - - /* m920x will disconnect itself from the bus after this. */ - (void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO); - deb("firmware uploaded!\n"); - - done: - kfree(read); - kfree(buff); - - return ret; -} - -/* Callbacks for DVB USB */ -static int m920x_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - struct usb_host_interface *alt; - - alt = usb_altnum_to_altsetting(usb_ifnum_to_if(udev, 0), 1); - *cold = (alt == NULL) ? 1 : 0; - - return 0; -} - -/* demod configurations */ -static int m920x_mt352_demod_init(struct dvb_frontend *fe) -{ - int ret; - u8 config[] = { CONFIG, 0x3d }; - u8 clock[] = { CLOCK_CTL, 0x30 }; - u8 reset[] = { RESET, 0x80 }; - u8 adc_ctl[] = { ADC_CTL_1, 0x40 }; - u8 agc[] = { AGC_TARGET, 0x1c, 0x20 }; - u8 sec_agc[] = { 0x69, 0x00, 0xff, 0xff, 0x40, 0xff, 0x00, 0x40, 0x40 }; - u8 unk1[] = { 0x93, 0x1a }; - u8 unk2[] = { 0xb5, 0x7a }; - - deb("Demod init!\n"); - - if ((ret = mt352_write(fe, config, ARRAY_SIZE(config))) != 0) - return ret; - if ((ret = mt352_write(fe, clock, ARRAY_SIZE(clock))) != 0) - return ret; - if ((ret = mt352_write(fe, reset, ARRAY_SIZE(reset))) != 0) - return ret; - if ((ret = mt352_write(fe, adc_ctl, ARRAY_SIZE(adc_ctl))) != 0) - return ret; - if ((ret = mt352_write(fe, agc, ARRAY_SIZE(agc))) != 0) - return ret; - if ((ret = mt352_write(fe, sec_agc, ARRAY_SIZE(sec_agc))) != 0) - return ret; - if ((ret = mt352_write(fe, unk1, ARRAY_SIZE(unk1))) != 0) - return ret; - if ((ret = mt352_write(fe, unk2, ARRAY_SIZE(unk2))) != 0) - return ret; - - return 0; -} - -static struct mt352_config m920x_mt352_config = { - .demod_address = 0x0f, - .no_tuner = 1, - .demod_init = m920x_mt352_demod_init, -}; - -static struct tda1004x_config m920x_tda10046_08_config = { - .demod_address = 0x08, - .invert = 0, - .invert_oclk = 0, - .ts_mode = TDA10046_TS_SERIAL, - .xtal_freq = TDA10046_XTAL_16M, - .if_freq = TDA10046_FREQ_045, - .agc_config = TDA10046_AGC_TDA827X, - .gpio_config = TDA10046_GPTRI, - .request_firmware = NULL, -}; - -static struct tda1004x_config m920x_tda10046_0b_config = { - .demod_address = 0x0b, - .invert = 0, - .invert_oclk = 0, - .ts_mode = TDA10046_TS_SERIAL, - .xtal_freq = TDA10046_XTAL_16M, - .if_freq = TDA10046_FREQ_045, - .agc_config = TDA10046_AGC_TDA827X, - .gpio_config = TDA10046_GPTRI, - .request_firmware = NULL, /* uses firmware EEPROM */ -}; - -/* tuner configurations */ -static struct qt1010_config m920x_qt1010_config = { - .i2c_address = 0x62 -}; - -/* Callbacks for DVB USB */ -static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) -{ - deb("%s\n",__func__); - - adap->fe_adap[0].fe = dvb_attach(mt352_attach, - &m920x_mt352_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) == NULL) - return -EIO; - - return 0; -} - -static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) -{ - deb("%s\n",__func__); - - adap->fe_adap[0].fe = dvb_attach(tda10046_attach, - &m920x_tda10046_08_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) == NULL) - return -EIO; - - return 0; -} - -static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) -{ - deb("%s\n",__func__); - - adap->fe_adap[0].fe = dvb_attach(tda10046_attach, - &m920x_tda10046_0b_config, - &adap->dev->i2c_adap); - if ((adap->fe_adap[0].fe) == NULL) - return -EIO; - - return 0; -} - -static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) -{ - deb("%s\n",__func__); - - if (dvb_attach(qt1010_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL) - return -ENODEV; - - return 0; -} - -static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) -{ - deb("%s\n",__func__); - - if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL) - return -ENODEV; - - return 0; -} - -static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap) -{ - deb("%s\n",__func__); - - if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) - return -ENODEV; - - return 0; -} - -static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, - &adap->dev->i2c_adap, 0x61, - TUNER_PHILIPS_FMD1216ME_MK3); - return 0; -} - -/* device-specific initialization */ -static struct m920x_inits megasky_rc_init [] = { - { M9206_RC_INIT2, 0xa8 }, - { M9206_RC_INIT1, 0x51 }, - { } /* terminating entry */ -}; - -static struct m920x_inits tvwalkertwin_rc_init [] = { - { M9206_RC_INIT2, 0x00 }, - { M9206_RC_INIT1, 0xef }, - { 0xff28, 0x00 }, - { 0xff23, 0x00 }, - { 0xff21, 0x30 }, - { } /* terminating entry */ -}; - -static struct m920x_inits pinnacle310e_init[] = { - /* without these the tuner don't work */ - { 0xff20, 0x9b }, - { 0xff22, 0x70 }, - - /* rc settings */ - { 0xff50, 0x80 }, - { M9206_RC_INIT1, 0x00 }, - { M9206_RC_INIT2, 0xff }, - { } /* terminating entry */ -}; - -/* ir keymaps */ -static struct rc_map_table rc_map_megasky_table[] = { - { 0x0012, KEY_POWER }, - { 0x001e, KEY_CYCLEWINDOWS }, /* min/max */ - { 0x0002, KEY_CHANNELUP }, - { 0x0005, KEY_CHANNELDOWN }, - { 0x0003, KEY_VOLUMEUP }, - { 0x0006, KEY_VOLUMEDOWN }, - { 0x0004, KEY_MUTE }, - { 0x0007, KEY_OK }, /* TS */ - { 0x0008, KEY_STOP }, - { 0x0009, KEY_MENU }, /* swap */ - { 0x000a, KEY_REWIND }, - { 0x001b, KEY_PAUSE }, - { 0x001f, KEY_FASTFORWARD }, - { 0x000c, KEY_RECORD }, - { 0x000d, KEY_CAMERA }, /* screenshot */ - { 0x000e, KEY_COFFEE }, /* "MTS" */ -}; - -static struct rc_map_table rc_map_tvwalkertwin_table[] = { - { 0x0001, KEY_ZOOM }, /* Full Screen */ - { 0x0002, KEY_CAMERA }, /* snapshot */ - { 0x0003, KEY_MUTE }, - { 0x0004, KEY_REWIND }, - { 0x0005, KEY_PLAYPAUSE }, /* Play/Pause */ - { 0x0006, KEY_FASTFORWARD }, - { 0x0007, KEY_RECORD }, - { 0x0008, KEY_STOP }, - { 0x0009, KEY_TIME }, /* Timeshift */ - { 0x000c, KEY_COFFEE }, /* Recall */ - { 0x000e, KEY_CHANNELUP }, - { 0x0012, KEY_POWER }, - { 0x0015, KEY_MENU }, /* source */ - { 0x0018, KEY_CYCLEWINDOWS }, /* TWIN PIP */ - { 0x001a, KEY_CHANNELDOWN }, - { 0x001b, KEY_VOLUMEDOWN }, - { 0x001e, KEY_VOLUMEUP }, -}; - -static struct rc_map_table rc_map_pinnacle310e_table[] = { - { 0x16, KEY_POWER }, - { 0x17, KEY_FAVORITES }, - { 0x0f, KEY_TEXT }, - { 0x48, KEY_PROGRAM }, /* preview */ - { 0x1c, KEY_EPG }, - { 0x04, KEY_LIST }, /* record list */ - { 0x03, KEY_1 }, - { 0x01, KEY_2 }, - { 0x06, KEY_3 }, - { 0x09, KEY_4 }, - { 0x1d, KEY_5 }, - { 0x1f, KEY_6 }, - { 0x0d, KEY_7 }, - { 0x19, KEY_8 }, - { 0x1b, KEY_9 }, - { 0x15, KEY_0 }, - { 0x0c, KEY_CANCEL }, - { 0x4a, KEY_CLEAR }, - { 0x13, KEY_BACK }, - { 0x00, KEY_TAB }, - { 0x4b, KEY_UP }, - { 0x4e, KEY_LEFT }, - { 0x52, KEY_RIGHT }, - { 0x51, KEY_DOWN }, - { 0x4f, KEY_ENTER }, /* could also be KEY_OK */ - { 0x1e, KEY_VOLUMEUP }, - { 0x0a, KEY_VOLUMEDOWN }, - { 0x05, KEY_CHANNELUP }, - { 0x02, KEY_CHANNELDOWN }, - { 0x11, KEY_RECORD }, - { 0x14, KEY_PLAY }, - { 0x4c, KEY_PAUSE }, - { 0x1a, KEY_STOP }, - { 0x40, KEY_REWIND }, - { 0x12, KEY_FASTFORWARD }, - { 0x41, KEY_PREVIOUSSONG }, /* Replay */ - { 0x42, KEY_NEXTSONG }, /* Skip */ - { 0x54, KEY_CAMERA }, /* Capture */ -/* { 0x50, KEY_SAP }, */ /* Sap */ - { 0x47, KEY_CYCLEWINDOWS }, /* Pip */ - { 0x4d, KEY_SCREEN }, /* FullScreen */ - { 0x08, KEY_SUBTITLE }, - { 0x0e, KEY_MUTE }, -/* { 0x49, KEY_LR }, */ /* L/R */ - { 0x07, KEY_SLEEP }, /* Hibernate */ - { 0x08, KEY_VIDEO }, /* A/V */ - { 0x0e, KEY_MENU }, /* Recall */ - { 0x45, KEY_ZOOMIN }, - { 0x46, KEY_ZOOMOUT }, - { 0x18, KEY_RED }, /* Red */ - { 0x53, KEY_GREEN }, /* Green */ - { 0x5e, KEY_YELLOW }, /* Yellow */ - { 0x5f, KEY_BLUE }, /* Blue */ -}; - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties megasky_properties; -static struct dvb_usb_device_properties digivox_mini_ii_properties; -static struct dvb_usb_device_properties tvwalkertwin_properties; -static struct dvb_usb_device_properties dposh_properties; -static struct dvb_usb_device_properties pinnacle_pctv310e_properties; - -static int m920x_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct dvb_usb_device *d = NULL; - int ret; - struct m920x_inits *rc_init_seq = NULL; - int bInterfaceNumber = intf->cur_altsetting->desc.bInterfaceNumber; - - deb("Probing for m920x device at interface %d\n", bInterfaceNumber); - - if (bInterfaceNumber == 0) { - /* Single-tuner device, or first interface on - * multi-tuner device - */ - - ret = dvb_usb_device_init(intf, &megasky_properties, - THIS_MODULE, &d, adapter_nr); - if (ret == 0) { - rc_init_seq = megasky_rc_init; - goto found; - } - - ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, - THIS_MODULE, &d, adapter_nr); - if (ret == 0) { - /* No remote control, so no rc_init_seq */ - goto found; - } - - /* This configures both tuners on the TV Walker Twin */ - ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, - THIS_MODULE, &d, adapter_nr); - if (ret == 0) { - rc_init_seq = tvwalkertwin_rc_init; - goto found; - } - - ret = dvb_usb_device_init(intf, &dposh_properties, - THIS_MODULE, &d, adapter_nr); - if (ret == 0) { - /* Remote controller not supported yet. */ - goto found; - } - - ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties, - THIS_MODULE, &d, adapter_nr); - if (ret == 0) { - rc_init_seq = pinnacle310e_init; - goto found; - } - - return ret; - } else { - /* Another interface on a multi-tuner device */ - - /* The LifeView TV Walker Twin gets here, but struct - * tvwalkertwin_properties already configured both - * tuners, so there is nothing for us to do here - */ - } - - found: - if ((ret = m920x_init_ep(intf)) < 0) - return ret; - - if (d && (ret = m920x_init(d, rc_init_seq)) != 0) - return ret; - - return ret; -} - -static struct usb_device_id m920x_table [] = { - { USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) }, - { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, - USB_PID_MSI_DIGI_VOX_MINI_II) }, - { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, - USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) }, - { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, - USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) }, - { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) }, - { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) }, - { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, m920x_table); - -static struct dvb_usb_device_properties megasky_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-megasky-02.fw", - .download_firmware = m920x_firmware_download, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_megasky_table, - .rc_map_size = ARRAY_SIZE(rc_map_megasky_table), - .rc_query = m920x_rc_query, - }, - - .size_of_priv = sizeof(struct m920x_state), - - .identify_state = m920x_identify_state, - .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 8, - .pid_filter = m920x_pid_filter, - .pid_filter_ctrl = m920x_pid_filter_ctrl, - - .frontend_attach = m920x_mt352_frontend_attach, - .tuner_attach = m920x_qt1010_tuner_attach, - - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 512, - } - } - }, - }}, - }}, - .i2c_algo = &m920x_i2c_algo, - - .num_device_descs = 1, - .devices = { - { "MSI Mega Sky 580 DVB-T USB2.0", - { &m920x_table[0], NULL }, - { NULL }, - } - } -}; - -static struct dvb_usb_device_properties digivox_mini_ii_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-digivox-02.fw", - .download_firmware = m920x_firmware_download, - - .size_of_priv = sizeof(struct m920x_state), - - .identify_state = m920x_identify_state, - .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 8, - .pid_filter = m920x_pid_filter, - .pid_filter_ctrl = m920x_pid_filter_ctrl, - - .frontend_attach = m920x_tda10046_08_frontend_attach, - .tuner_attach = m920x_tda8275_60_tuner_attach, - - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 0x4000, - } - } - }, - }}, - }}, - .i2c_algo = &m920x_i2c_algo, - - .num_device_descs = 1, - .devices = { - { "MSI DIGI VOX mini II DVB-T USB2.0", - { &m920x_table[1], NULL }, - { NULL }, - }, - } -}; - -/* LifeView TV Walker Twin support by Nick Andrew <nick@nick-andrew.net> - * - * LifeView TV Walker Twin has 1 x M9206, 2 x TDA10046, 2 x TDA8275A - * TDA10046 #0 is located at i2c address 0x08 - * TDA10046 #1 is located at i2c address 0x0b - * TDA8275A #0 is located at i2c address 0x60 - * TDA8275A #1 is located at i2c address 0x61 - */ -static struct dvb_usb_device_properties tvwalkertwin_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-tvwalkert.fw", - .download_firmware = m920x_firmware_download, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_tvwalkertwin_table, - .rc_map_size = ARRAY_SIZE(rc_map_tvwalkertwin_table), - .rc_query = m920x_rc_query, - }, - - .size_of_priv = sizeof(struct m920x_state), - - .identify_state = m920x_identify_state, - .num_adapters = 2, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 8, - .pid_filter = m920x_pid_filter, - .pid_filter_ctrl = m920x_pid_filter_ctrl, - - .frontend_attach = m920x_tda10046_08_frontend_attach, - .tuner_attach = m920x_tda8275_60_tuner_attach, - - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 512, - } - } - }}, - }},{ - .num_frontends = 1, - .fe = {{ - - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 8, - .pid_filter = m920x_pid_filter, - .pid_filter_ctrl = m920x_pid_filter_ctrl, - - .frontend_attach = m920x_tda10046_0b_frontend_attach, - .tuner_attach = m920x_tda8275_61_tuner_attach, - - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 512, - } - } - }}, - }, - }}, - .i2c_algo = &m920x_i2c_algo, - - .num_device_descs = 1, - .devices = { - { .name = "LifeView TV Walker Twin DVB-T USB2.0", - .cold_ids = { &m920x_table[2], NULL }, - .warm_ids = { &m920x_table[3], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties dposh_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .firmware = "dvb-usb-dposh-01.fw", - .download_firmware = m920x_firmware_download, - - .size_of_priv = sizeof(struct m920x_state), - - .identify_state = m920x_identify_state, - .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - /* Hardware pid filters don't work with this device/firmware */ - - .frontend_attach = m920x_mt352_frontend_attach, - .tuner_attach = m920x_qt1010_tuner_attach, - - .stream = { - .type = USB_BULK, - .count = 8, - .endpoint = 0x81, - .u = { - .bulk = { - .buffersize = 512, - } - } - }, - }}, - }}, - .i2c_algo = &m920x_i2c_algo, - - .num_device_descs = 1, - .devices = { - { .name = "Dposh DVB-T USB2.0", - .cold_ids = { &m920x_table[4], NULL }, - .warm_ids = { &m920x_table[5], NULL }, - }, - } -}; - -static struct dvb_usb_device_properties pinnacle_pctv310e_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = NULL, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_pinnacle310e_table, - .rc_map_size = ARRAY_SIZE(rc_map_pinnacle310e_table), - .rc_query = m920x_rc_query, - }, - - .size_of_priv = sizeof(struct m920x_state), - - .identify_state = m920x_identify_state, - .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 8, - .pid_filter = m920x_pid_filter, - .pid_filter_ctrl = m920x_pid_filter_ctrl, - - .frontend_attach = m920x_mt352_frontend_attach, - .tuner_attach = m920x_fmd1216me_tuner_attach, - - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x84, - .u = { - .isoc = { - .framesperurb = 128, - .framesize = 564, - .interval = 1, - } - } - }, - }}, - } }, - .i2c_algo = &m920x_i2c_algo, - - .num_device_descs = 1, - .devices = { - { "Pinnacle PCTV 310e", - { &m920x_table[6], NULL }, - { NULL }, - } - } -}; - -static struct usb_driver m920x_driver = { - .name = "dvb_usb_m920x", - .probe = m920x_probe, - .disconnect = dvb_usb_device_exit, - .id_table = m920x_table, -}; - -module_usb_driver(m920x_driver); - -MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>"); -MODULE_DESCRIPTION("DVB Driver for ULI M920x"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-basic-offset: 8 - */ diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h deleted file mode 100644 index 3c061518ffc1..000000000000 --- a/drivers/media/dvb/dvb-usb/m920x.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _DVB_USB_M920X_H_ -#define _DVB_USB_M920X_H_ - -#define DVB_USB_LOG_PREFIX "m920x" -#include "dvb-usb.h" - -#define deb(args...) dprintk(dvb_usb_m920x_debug,0x01,args) - -#define M9206_CORE 0x22 -#define M9206_RC_STATE 0xff51 -#define M9206_RC_KEY 0xff52 -#define M9206_RC_INIT1 0xff54 -#define M9206_RC_INIT2 0xff55 -#define M9206_FW_GO 0xff69 - -#define M9206_I2C 0x23 -#define M9206_FILTER 0x25 -#define M9206_FW 0x30 - -#define M9206_MAX_FILTERS 8 -#define M9206_MAX_ADAPTERS 4 - -/* -sequences found in logs: -[index value] -0x80 write addr -(0x00 out byte)* -0x40 out byte - -0x80 write addr -(0x00 out byte)* -0x80 read addr -(0x21 in byte)* -0x60 in byte - -this sequence works: -0x80 read addr -(0x21 in byte)* -0x60 in byte - -Guess at API of the I2C function: -I2C operation is done one byte at a time with USB control messages. The -index the messages is sent to is made up of a set of flags that control -the I2C bus state: -0x80: Send START condition. After a START condition, one would normally - always send the 7-bit slave I2C address as the 7 MSB, followed by - the read/write bit as the LSB. -0x40: Send STOP condition. This should be set on the last byte of an - I2C transaction. -0x20: Read a byte from the slave. As opposed to writing a byte to the - slave. The slave will normally not produce any data unless you - set the R/W bit to 1 when sending the slave's address after the - START condition. -0x01: Respond with ACK, as opposed to a NACK. For a multi-byte read, - the master should send an ACK, that is pull SDA low during the 9th - clock cycle, after every byte but the last. This flags only makes - sense when bit 0x20 is set, indicating a read. - -What any other bits might mean, or how to get the slave's ACK/NACK -response to a write, is unknown. -*/ - -struct m920x_state { - u16 filters[M9206_MAX_ADAPTERS][M9206_MAX_FILTERS]; - int filtering_enabled[M9206_MAX_ADAPTERS]; - int rep_count; -}; - -/* Initialisation data for the m920x - */ - -struct m920x_inits { - u16 address; - u8 data; -}; - -#endif diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c deleted file mode 100644 index 6c55384e2fca..000000000000 --- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c +++ /dev/null @@ -1,233 +0,0 @@ -/* DVB USB framework compliant Linux driver for the Hauppauge WinTV-NOVA-T usb2 - * DVB-T receiver. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dibusb.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define deb_rc(args...) dprintk(debug,0x01,args) -#define deb_ee(args...) dprintk(debug,0x02,args) - -/* Hauppauge NOVA-T USB2 keys */ -static struct rc_map_table rc_map_haupp_table[] = { - { 0x1e00, KEY_0 }, - { 0x1e01, KEY_1 }, - { 0x1e02, KEY_2 }, - { 0x1e03, KEY_3 }, - { 0x1e04, KEY_4 }, - { 0x1e05, KEY_5 }, - { 0x1e06, KEY_6 }, - { 0x1e07, KEY_7 }, - { 0x1e08, KEY_8 }, - { 0x1e09, KEY_9 }, - { 0x1e0a, KEY_KPASTERISK }, - { 0x1e0b, KEY_RED }, - { 0x1e0c, KEY_RADIO }, - { 0x1e0d, KEY_MENU }, - { 0x1e0e, KEY_GRAVE }, /* # */ - { 0x1e0f, KEY_MUTE }, - { 0x1e10, KEY_VOLUMEUP }, - { 0x1e11, KEY_VOLUMEDOWN }, - { 0x1e12, KEY_CHANNEL }, - { 0x1e14, KEY_UP }, - { 0x1e15, KEY_DOWN }, - { 0x1e16, KEY_LEFT }, - { 0x1e17, KEY_RIGHT }, - { 0x1e18, KEY_VIDEO }, - { 0x1e19, KEY_AUDIO }, - { 0x1e1a, KEY_IMAGES }, - { 0x1e1b, KEY_EPG }, - { 0x1e1c, KEY_TV }, - { 0x1e1e, KEY_NEXT }, - { 0x1e1f, KEY_BACK }, - { 0x1e20, KEY_CHANNELUP }, - { 0x1e21, KEY_CHANNELDOWN }, - { 0x1e24, KEY_LAST }, /* Skip backwards */ - { 0x1e25, KEY_OK }, - { 0x1e29, KEY_BLUE}, - { 0x1e2e, KEY_GREEN }, - { 0x1e30, KEY_PAUSE }, - { 0x1e32, KEY_REWIND }, - { 0x1e34, KEY_FASTFORWARD }, - { 0x1e35, KEY_PLAY }, - { 0x1e36, KEY_STOP }, - { 0x1e37, KEY_RECORD }, - { 0x1e38, KEY_YELLOW }, - { 0x1e3b, KEY_GOTO }, - { 0x1e3d, KEY_POWER }, -}; - -/* Firmware bug? sometimes, when a new key is pressed, the previous pressed key - * is delivered. No workaround yet, maybe a new firmware. - */ -static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom; - u16 raw; - int i; - struct dibusb_device_state *st = d->priv; - - dvb_usb_generic_rw(d,cmd,2,key,5,0); - - *state = REMOTE_NO_KEY_PRESSED; - switch (key[0]) { - case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: - raw = ((key[1] << 8) | key[2]) >> 3; - toggle = !!(raw & 0x800); - data = raw & 0x3f; - custom = (raw >> 6) & 0x1f; - - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle); - - for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) { - if (rc5_data(&rc_map_haupp_table[i]) == data && - rc5_custom(&rc_map_haupp_table[i]) == custom) { - - deb_rc("c: %x, d: %x\n", rc5_data(&rc_map_haupp_table[i]), - rc5_custom(&rc_map_haupp_table[i])); - - *event = rc_map_haupp_table[i].keycode; - *state = REMOTE_KEY_PRESSED; - if (st->old_toggle == toggle) { - if (st->last_repeat_count++ < 2) - *state = REMOTE_NO_KEY_PRESSED; - } else { - st->last_repeat_count = 0; - st->old_toggle = toggle; - } - break; - } - } - - break; - case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY: - default: - break; - } - - return 0; -} - -static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6]) -{ - int i; - u8 b; - - mac[0] = 0x00; - mac[1] = 0x0d; - mac[2] = 0xfe; - - /* this is a complete guess, but works for my box */ - for (i = 136; i < 139; i++) { - dibusb_read_eeprom_byte(d,i, &b); - - mac[5 - (i - 136)] = b; - } - - return 0; -} - -/* USB Driver stuff */ -static struct dvb_usb_device_properties nova_t_properties; - -static int nova_t_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - return dvb_usb_device_init(intf, &nova_t_properties, - THIS_MODULE, NULL, adapter_nr); -} - -/* do not change the order of the ID table */ -static struct usb_device_id nova_t_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) }, -/* 01 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, nova_t_table); - -static struct dvb_usb_device_properties nova_t_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-nova-t-usb2-02.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter_count = 32, - - .streaming_ctrl = dibusb2_0_streaming_ctrl, - .pid_filter = dibusb_pid_filter, - .pid_filter_ctrl = dibusb_pid_filter_ctrl, - .frontend_attach = dibusb_dib3000mc_frontend_attach, - .tuner_attach = dibusb_dib3000mc_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - } - }, - .size_of_priv = sizeof(struct dibusb_device_state), - - .power_ctrl = dibusb2_0_power_ctrl, - .read_mac_address = nova_t_read_mac_address, - - .rc.legacy = { - .rc_interval = 100, - .rc_map_table = rc_map_haupp_table, - .rc_map_size = ARRAY_SIZE(rc_map_haupp_table), - .rc_query = nova_t_rc_query, - }, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Hauppauge WinTV-NOVA-T usb2", - { &nova_t_table[0], NULL }, - { &nova_t_table[1], NULL }, - }, - { NULL }, - } -}; - -static struct usb_driver nova_t_driver = { - .name = "dvb_usb_nova_t_usb2", - .probe = nova_t_probe, - .disconnect = dvb_usb_device_exit, - .id_table = nova_t_table, -}; - -module_usb_driver(nova_t_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Hauppauge WinTV-NOVA-T usb2"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c deleted file mode 100644 index c8a95042dfbc..000000000000 --- a/drivers/media/dvb/dvb-usb/opera1.c +++ /dev/null @@ -1,583 +0,0 @@ -/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card -* -* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org) -* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de) -* -* This program is free software; you can redistribute it and/or modify it -* under the terms of the GNU General Public License as published by the Free -* Software Foundation, version 2. -* -* see Documentation/dvb/README.dvb-usb for more information -*/ - -#define DVB_USB_LOG_PREFIX "opera" - -#include "dvb-usb.h" -#include "stv0299.h" - -#define OPERA_READ_MSG 0 -#define OPERA_WRITE_MSG 1 -#define OPERA_I2C_TUNER 0xd1 - -#define READ_FX2_REG_REQ 0xba -#define READ_MAC_ADDR 0x08 -#define OPERA_WRITE_FX2 0xbb -#define OPERA_TUNER_REQ 0xb1 -#define REG_1F_SYMBOLRATE_BYTE0 0x1f -#define REG_20_SYMBOLRATE_BYTE1 0x20 -#define REG_21_SYMBOLRATE_BYTE2 0x21 - -#define ADDR_B600_VOLTAGE_13V (0x02) -#define ADDR_B601_VOLTAGE_18V (0x03) -#define ADDR_B1A6_STREAM_CTRL (0x04) -#define ADDR_B880_READ_REMOTE (0x05) - -struct opera1_state { - u32 last_key_pressed; -}; -struct rc_map_opera_table { - u32 keycode; - u32 event; -}; - -static int dvb_usb_opera1_debug; -module_param_named(debug, dvb_usb_opera1_debug, int, 0644); -MODULE_PARM_DESC(debug, - "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." - DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - - -static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value, - u8 * data, u16 len, int flags) -{ - int ret; - u8 tmp; - u8 *buf; - unsigned int pipe = (flags == OPERA_READ_MSG) ? - usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0); - u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; - - buf = kmalloc(len, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - if (flags == OPERA_WRITE_MSG) - memcpy(buf, data, len); - ret = usb_control_msg(dev, pipe, request, - request_type | USB_TYPE_VENDOR, value, 0x0, - buf, len, 2000); - - if (request == OPERA_TUNER_REQ) { - tmp = buf[0]; - if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), - OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR, - 0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) { - ret = 0; - goto out; - } - buf[0] = tmp; - } - if (flags == OPERA_READ_MSG) - memcpy(data, buf, len); -out: - kfree(buf); - return ret; -} - -/* I2C */ - -static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr, - u8 * buf, u16 len) -{ - int ret = 0; - u8 request; - u16 value; - - if (!dev) { - info("no usb_device"); - return -EINVAL; - } - if (mutex_lock_interruptible(&dev->usb_mutex) < 0) - return -EAGAIN; - - switch (addr>>1){ - case ADDR_B600_VOLTAGE_13V: - request=0xb6; - value=0x00; - break; - case ADDR_B601_VOLTAGE_18V: - request=0xb6; - value=0x01; - break; - case ADDR_B1A6_STREAM_CTRL: - request=0xb1; - value=0xa6; - break; - case ADDR_B880_READ_REMOTE: - request=0xb8; - value=0x80; - break; - default: - request=0xb1; - value=addr; - } - ret = opera1_xilinx_rw(dev->udev, request, - value, buf, len, - addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG); - - mutex_unlock(&dev->usb_mutex); - return ret; -} - -static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - int i = 0, tmp = 0; - - if (!d) - return -ENODEV; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - if ((tmp = opera1_usb_i2c_msgxfer(d, - (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), - msg[i].buf, - msg[i].len - )) != msg[i].len) { - break; - } - if (dvb_usb_opera1_debug & 0x10) - info("sending i2c mesage %d %d", tmp, msg[i].len); - } - mutex_unlock(&d->i2c_mutex); - return num; -} - -static u32 opera1_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm opera1_i2c_algo = { - .master_xfer = opera1_i2c_xfer, - .functionality = opera1_i2c_func, -}; - -static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) -{ - static u8 command_13v[1]={0x00}; - static u8 command_18v[1]={0x01}; - struct i2c_msg msg[] = { - {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1}, - }; - struct dvb_usb_adapter *udev_adap = - (struct dvb_usb_adapter *)(fe->dvb->priv); - if (voltage == SEC_VOLTAGE_18) { - msg[0].addr = ADDR_B601_VOLTAGE_18V; - msg[0].buf = command_18v; - } - i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); - return 0; -} - -static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, - u32 ratio) -{ - stv0299_writereg(fe, 0x13, 0x98); - stv0299_writereg(fe, 0x14, 0x95); - stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff); - stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff); - stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0); - return 0; - -} -static u8 opera1_inittab[] = { - 0x00, 0xa1, - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, - 0x05, 0x05, - 0x06, 0x02, - 0x07, 0x00, - 0x0b, 0x00, - 0x0c, 0x01, - 0x0d, 0x81, - 0x0e, 0x44, - 0x0f, 0x19, - 0x10, 0x3f, - 0x11, 0x84, - 0x12, 0xda, - 0x13, 0x98, - 0x14, 0x95, - 0x15, 0xc9, - 0x16, 0xeb, - 0x17, 0x00, - 0x18, 0x19, - 0x19, 0x8b, - 0x1a, 0x00, - 0x1b, 0x82, - 0x1c, 0x7f, - 0x1d, 0x00, - 0x1e, 0x00, - REG_1F_SYMBOLRATE_BYTE0, 0x06, - REG_20_SYMBOLRATE_BYTE1, 0x50, - REG_21_SYMBOLRATE_BYTE2, 0x10, - 0x22, 0x00, - 0x23, 0x00, - 0x24, 0x37, - 0x25, 0xbc, - 0x26, 0x00, - 0x27, 0x00, - 0x28, 0x00, - 0x29, 0x1e, - 0x2a, 0x14, - 0x2b, 0x1f, - 0x2c, 0x09, - 0x2d, 0x0a, - 0x2e, 0x00, - 0x2f, 0x00, - 0x30, 0x00, - 0x31, 0x1f, - 0x32, 0x19, - 0x33, 0xfc, - 0x34, 0x13, - 0xff, 0xff, -}; - -static struct stv0299_config opera1_stv0299_config = { - .demod_address = 0xd0>>1, - .min_delay_ms = 100, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_0, - .volt13_op0_op1 = STV0299_VOLT13_OP0, - .inittab = opera1_inittab, - .set_symbol_rate = opera1_stv0299_set_symbol_rate, -}; - -static int opera1_frontend_attach(struct dvb_usb_adapter *d) -{ - d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config, - &d->dev->i2c_adap); - if ((d->fe_adap[0].fe) != NULL) { - d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage; - return 0; - } - info("not attached stv0299"); - return -EIO; -} - -static int opera1_tuner_attach(struct dvb_usb_adapter *adap) -{ - dvb_attach( - dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1, - &adap->dev->i2c_adap, DVB_PLL_OPERA1 - ); - return 0; -} - -static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 val = onoff ? 0x01 : 0x00; - - if (dvb_usb_opera1_debug) - info("power %s", onoff ? "on" : "off"); - return opera1_xilinx_rw(d->udev, 0xb7, val, - &val, 1, OPERA_WRITE_MSG); -} - -static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - static u8 buf_start[2] = { 0xff, 0x03 }; - static u8 buf_stop[2] = { 0xff, 0x00 }; - struct i2c_msg start_tuner[] = { - {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2}, - }; - if (dvb_usb_opera1_debug) - info("streaming %s", onoff ? "on" : "off"); - i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1); - return 0; -} - -static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, - int onoff) -{ - u8 b_pid[3]; - struct i2c_msg msg[] = { - {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, - }; - if (dvb_usb_opera1_debug) - info("pidfilter index: %d pid: %d %s", index, pid, - onoff ? "on" : "off"); - b_pid[0] = (2 * index) + 4; - b_pid[1] = onoff ? (pid & 0xff) : (0x00); - b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00); - i2c_transfer(&adap->dev->i2c_adap, msg, 1); - return 0; -} - -static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) -{ - int u = 0x04; - u8 b_pid[3]; - struct i2c_msg msg[] = { - {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, - }; - if (dvb_usb_opera1_debug) - info("%s hw-pidfilter", onoff ? "enable" : "disable"); - for (; u < 0x7e; u += 2) { - b_pid[0] = u; - b_pid[1] = 0; - b_pid[2] = 0x80; - i2c_transfer(&adap->dev->i2c_adap, msg, 1); - } - return 0; -} - -static struct rc_map_table rc_map_opera1_table[] = { - {0x5fa0, KEY_1}, - {0x51af, KEY_2}, - {0x5da2, KEY_3}, - {0x41be, KEY_4}, - {0x0bf5, KEY_5}, - {0x43bd, KEY_6}, - {0x47b8, KEY_7}, - {0x49b6, KEY_8}, - {0x05fa, KEY_9}, - {0x45ba, KEY_0}, - {0x09f6, KEY_CHANNELUP}, /*chanup */ - {0x1be5, KEY_CHANNELDOWN}, /*chandown */ - {0x5da3, KEY_VOLUMEDOWN}, /*voldown */ - {0x5fa1, KEY_VOLUMEUP}, /*volup */ - {0x07f8, KEY_SPACE}, /*tab */ - {0x1fe1, KEY_OK}, /*play ok */ - {0x1be4, KEY_ZOOM}, /*zoom */ - {0x59a6, KEY_MUTE}, /*mute */ - {0x5ba5, KEY_RADIO}, /*tv/f */ - {0x19e7, KEY_RECORD}, /*rec */ - {0x01fe, KEY_STOP}, /*Stop */ - {0x03fd, KEY_PAUSE}, /*pause */ - {0x03fc, KEY_SCREEN}, /*<- -> */ - {0x07f9, KEY_CAMERA}, /*capture */ - {0x47b9, KEY_ESC}, /*exit */ - {0x43bc, KEY_POWER2}, /*power */ -}; - -static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state) -{ - struct opera1_state *opst = dev->priv; - u8 rcbuffer[32]; - const u16 startmarker1 = 0x10ed; - const u16 startmarker2 = 0x11ec; - struct i2c_msg read_remote[] = { - {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32}, - }; - int i = 0; - u32 send_key = 0; - - if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) { - for (i = 0; i < 32; i++) { - if (rcbuffer[i]) - send_key |= 1; - if (i < 31) - send_key = send_key << 1; - } - if (send_key & 0x8000) - send_key = (send_key << 1) | (send_key >> 15 & 0x01); - - if (send_key == 0xffff && opst->last_key_pressed != 0) { - *state = REMOTE_KEY_REPEAT; - *event = opst->last_key_pressed; - return 0; - } - for (; send_key != 0;) { - if (send_key >> 16 == startmarker2) { - break; - } else if (send_key >> 16 == startmarker1) { - send_key = - (send_key & 0xfffeffff) | (startmarker1 << 16); - break; - } else - send_key >>= 1; - } - - if (send_key == 0) - return 0; - - send_key = (send_key & 0xffff) | 0x0100; - - for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) { - if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) { - *state = REMOTE_KEY_PRESSED; - *event = rc_map_opera1_table[i].keycode; - opst->last_key_pressed = - rc_map_opera1_table[i].keycode; - break; - } - opst->last_key_pressed = 0; - } - } else - *state = REMOTE_NO_KEY_PRESSED; - return 0; -} - -static struct usb_device_id opera1_table[] = { - {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)}, - {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)}, - {} -}; - -MODULE_DEVICE_TABLE(usb, opera1_table); - -static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) -{ - u8 command[] = { READ_MAC_ADDR }; - opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG); - opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG); - return 0; -} -static int opera1_xilinx_load_firmware(struct usb_device *dev, - const char *filename) -{ - const struct firmware *fw = NULL; - u8 *b, *p; - int ret = 0, i,fpgasize=40; - u8 testval; - info("start downloading fpga firmware %s",filename); - - if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { - err("did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems.", - filename); - return ret; - } else { - p = kmalloc(fw->size, GFP_KERNEL); - opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG); - if (p != NULL && testval != 0x67) { - - u8 reset = 0, fpga_command = 0; - memcpy(p, fw->data, fw->size); - /* clear fpga ? */ - opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1, - OPERA_WRITE_MSG); - for (i = 0; i < fw->size;) { - if ( (fw->size - i) <fpgasize){ - fpgasize=fw->size-i; - } - b = (u8 *) p + i; - if (opera1_xilinx_rw - (dev, OPERA_WRITE_FX2, 0x0, b , fpgasize, - OPERA_WRITE_MSG) != fpgasize - ) { - err("error while transferring firmware"); - ret = -EINVAL; - break; - } - i = i + fpgasize; - } - /* restart the CPU */ - if (ret || opera1_xilinx_rw - (dev, 0xa0, 0xe600, &reset, 1, - OPERA_WRITE_MSG) != 1) { - err("could not restart the USB controller CPU."); - ret = -EINVAL; - } - } - } - kfree(p); - release_firmware(fw); - return ret; -} - -static struct dvb_usb_device_properties opera1_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-opera-01.fw", - .size_of_priv = sizeof(struct opera1_state), - - .power_ctrl = opera1_power_ctrl, - .i2c_algo = &opera1_i2c_algo, - - .rc.legacy = { - .rc_map_table = rc_map_opera1_table, - .rc_map_size = ARRAY_SIZE(rc_map_opera1_table), - .rc_interval = 200, - .rc_query = opera1_rc_query, - }, - .read_mac_address = opera1_read_mac_address, - .generic_bulk_ctrl_endpoint = 0x00, - /* parameter for the MPEG2-data transfer */ - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = opera1_frontend_attach, - .streaming_ctrl = opera1_streaming_ctrl, - .tuner_attach = opera1_tuner_attach, - .caps = - DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - .pid_filter = opera1_pid_filter, - .pid_filter_ctrl = opera1_pid_filter_control, - .pid_filter_count = 252, - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x82, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .num_device_descs = 1, - .devices = { - {"Opera1 DVB-S USB2.0", - {&opera1_table[0], NULL}, - {&opera1_table[1], NULL}, - }, - } -}; - -static int opera1_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - - if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM && - udev->descriptor.idVendor == USB_VID_OPERA1 && - opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0 - ) { - return -EINVAL; - } - - if (0 != dvb_usb_device_init(intf, &opera1_properties, - THIS_MODULE, NULL, adapter_nr)) - return -EINVAL; - return 0; -} - -static struct usb_driver opera1_driver = { - .name = "opera1", - .probe = opera1_probe, - .disconnect = dvb_usb_device_exit, - .id_table = opera1_table, -}; - -module_usb_driver(opera1_driver); - -MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org"); -MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de"); -MODULE_DESCRIPTION("Driver for Opera1 DVB-S device"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/pctv452e.c b/drivers/media/dvb/dvb-usb/pctv452e.c deleted file mode 100644 index 02e878577c3d..000000000000 --- a/drivers/media/dvb/dvb-usb/pctv452e.c +++ /dev/null @@ -1,1063 +0,0 @@ -/* - * PCTV 452e DVB driver - * - * Copyright (c) 2006-2008 Dominik Kuhlen <dkuhlen@gmx.net> - * - * TT connect S2-3650-CI Common Interface support, MAC readout - * Copyright (C) 2008 Michael H. Schimek <mschimek@gmx.at> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/* dvb usb framework */ -#define DVB_USB_LOG_PREFIX "pctv452e" -#include "dvb-usb.h" - -/* Demodulator */ -#include "stb0899_drv.h" -#include "stb0899_reg.h" -#include "stb0899_cfg.h" -/* Tuner */ -#include "stb6100.h" -#include "stb6100_cfg.h" -/* FE Power */ -#include "lnbp22.h" - -#include "dvb_ca_en50221.h" -#include "ttpci-eeprom.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define ISOC_INTERFACE_ALTERNATIVE 3 - -#define SYNC_BYTE_OUT 0xaa -#define SYNC_BYTE_IN 0x55 - -/* guessed: (copied from ttusb-budget) */ -#define PCTV_CMD_RESET 0x15 -/* command to poll IR receiver */ -#define PCTV_CMD_IR 0x1b -/* command to send I2C */ -#define PCTV_CMD_I2C 0x31 - -#define I2C_ADDR_STB0899 (0xd0 >> 1) -#define I2C_ADDR_STB6100 (0xc0 >> 1) -#define I2C_ADDR_LNBP22 (0x10 >> 1) -#define I2C_ADDR_24C16 (0xa0 >> 1) -#define I2C_ADDR_24C64 (0xa2 >> 1) - - -/* pctv452e sends us this amount of data for each issued usb-command */ -#define PCTV_ANSWER_LEN 64 -/* Wait up to 1000ms for device */ -#define PCTV_TIMEOUT 1000 - - -#define PCTV_LED_GPIO STB0899_GPIO01 -#define PCTV_LED_GREEN 0x82 -#define PCTV_LED_ORANGE 0x02 - -#define ci_dbg(format, arg...) \ -do { \ - if (0) \ - printk(KERN_DEBUG DVB_USB_LOG_PREFIX \ - ": " format "\n" , ## arg); \ -} while (0) - -enum { - TT3650_CMD_CI_TEST = 0x40, - TT3650_CMD_CI_RD_CTRL, - TT3650_CMD_CI_WR_CTRL, - TT3650_CMD_CI_RD_ATTR, - TT3650_CMD_CI_WR_ATTR, - TT3650_CMD_CI_RESET, - TT3650_CMD_CI_SET_VIDEO_PORT -}; - - -static struct stb0899_postproc pctv45e_postproc[] = { - { PCTV_LED_GPIO, STB0899_GPIOPULLUP }, - { 0, 0 } -}; - -/* - * stores all private variables for communication with the PCTV452e DVB-S2 - */ -struct pctv452e_state { - struct dvb_ca_en50221 ca; - struct mutex ca_mutex; - - u8 c; /* transaction counter, wraps around... */ - u8 initialized; /* set to 1 if 0x15 has been sent */ - u16 last_rc_key; -}; - -static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, - unsigned int write_len, unsigned int read_len) -{ - struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 buf[64]; - u8 id; - unsigned int rlen; - int ret; - - BUG_ON(NULL == data && 0 != (write_len | read_len)); - BUG_ON(write_len > 64 - 4); - BUG_ON(read_len > 64 - 4); - - id = state->c++; - - buf[0] = SYNC_BYTE_OUT; - buf[1] = id; - buf[2] = cmd; - buf[3] = write_len; - - memcpy(buf + 4, data, write_len); - - rlen = (read_len > 0) ? 64 : 0; - ret = dvb_usb_generic_rw(d, buf, 4 + write_len, - buf, rlen, /* delay_ms */ 0); - if (0 != ret) - goto failed; - - ret = -EIO; - if (SYNC_BYTE_IN != buf[0] || id != buf[1]) - goto failed; - - memcpy(data, buf + 4, read_len); - - return 0; - -failed: - err("CI error %d; %02X %02X %02X -> %*ph.", - ret, SYNC_BYTE_OUT, id, cmd, 3, buf); - - return ret; -} - -static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, - u8 cmd, u8 *data, unsigned int write_len, - unsigned int read_len) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - int ret; - - mutex_lock(&state->ca_mutex); - ret = tt3650_ci_msg(d, cmd, data, write_len, read_len); - mutex_unlock(&state->ca_mutex); - - return ret; -} - -static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, - int slot, int address) -{ - u8 buf[3]; - int ret; - - if (0 != slot) - return -EINVAL; - - buf[0] = (address >> 8) & 0x0F; - buf[1] = address; - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3); - - ci_dbg("%s %04x -> %d 0x%02x", - __func__, address, ret, buf[2]); - - if (ret < 0) - return ret; - - return buf[2]; -} - -static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, - int slot, int address, u8 value) -{ - u8 buf[3]; - - ci_dbg("%s %d 0x%04x 0x%02x", - __func__, slot, address, value); - - if (0 != slot) - return -EINVAL; - - buf[0] = (address >> 8) & 0x0F; - buf[1] = address; - buf[2] = value; - - return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3); -} - -static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, - int slot, - u8 address) -{ - u8 buf[2]; - int ret; - - if (0 != slot) - return -EINVAL; - - buf[0] = address & 3; - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2); - - ci_dbg("%s 0x%02x -> %d 0x%02x", - __func__, address, ret, buf[1]); - - if (ret < 0) - return ret; - - return buf[1]; -} - -static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, - int slot, - u8 address, - u8 value) -{ - u8 buf[2]; - - ci_dbg("%s %d 0x%02x 0x%02x", - __func__, slot, address, value); - - if (0 != slot) - return -EINVAL; - - buf[0] = address; - buf[1] = value; - - return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2); -} - -static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, - int slot, - int enable) -{ - u8 buf[1]; - int ret; - - ci_dbg("%s %d %d", __func__, slot, enable); - - if (0 != slot) - return -EINVAL; - - enable = !!enable; - buf[0] = enable; - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); - if (ret < 0) - return ret; - - if (enable != buf[0]) { - err("CI not %sabled.", enable ? "en" : "dis"); - return -EIO; - } - - return 0; -} - -static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) -{ - return tt3650_ci_set_video_port(ca, slot, /* enable */ 0); -} - -static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) -{ - return tt3650_ci_set_video_port(ca, slot, /* enable */ 1); -} - -static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; - struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 buf[1]; - int ret; - - ci_dbg("%s %d", __func__, slot); - - if (0 != slot) - return -EINVAL; - - buf[0] = 0; - - mutex_lock(&state->ca_mutex); - - ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); - if (0 != ret) - goto failed; - - msleep(500); - - buf[0] = 1; - - ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); - if (0 != ret) - goto failed; - - msleep(500); - - buf[0] = 0; /* FTA */ - - ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); - - failed: - mutex_unlock(&state->ca_mutex); - - return ret; -} - -static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, - int slot, - int open) -{ - u8 buf[1]; - int ret; - - if (0 != slot) - return -EINVAL; - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1); - if (0 != ret) - return ret; - - if (1 == buf[0]) - return DVB_CA_EN50221_POLL_CAM_PRESENT | - DVB_CA_EN50221_POLL_CAM_READY; - - return 0; - -} - -static void tt3650_ci_uninit(struct dvb_usb_device *d) -{ - struct pctv452e_state *state; - - ci_dbg("%s", __func__); - - if (NULL == d) - return; - - state = (struct pctv452e_state *)d->priv; - if (NULL == state) - return; - - if (NULL == state->ca.data) - return; - - /* Error ignored. */ - tt3650_ci_set_video_port(&state->ca, /* slot */ 0, /* enable */ 0); - - dvb_ca_en50221_release(&state->ca); - - memset(&state->ca, 0, sizeof(state->ca)); -} - -static int tt3650_ci_init(struct dvb_usb_adapter *a) -{ - struct dvb_usb_device *d = a->dev; - struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - int ret; - - ci_dbg("%s", __func__); - - mutex_init(&state->ca_mutex); - - state->ca.owner = THIS_MODULE; - state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem; - state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem; - state->ca.read_cam_control = tt3650_ci_read_cam_control; - state->ca.write_cam_control = tt3650_ci_write_cam_control; - state->ca.slot_reset = tt3650_ci_slot_reset; - state->ca.slot_shutdown = tt3650_ci_slot_shutdown; - state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable; - state->ca.poll_slot_status = tt3650_ci_poll_slot_status; - state->ca.data = d; - - ret = dvb_ca_en50221_init(&a->dvb_adap, - &state->ca, - /* flags */ 0, - /* n_slots */ 1); - if (0 != ret) { - err("Cannot initialize CI: Error %d.", ret); - memset(&state->ca, 0, sizeof(state->ca)); - return ret; - } - - info("CI initialized."); - - return 0; -} - -#define CMD_BUFFER_SIZE 0x28 -static int pctv452e_i2c_msg(struct dvb_usb_device *d, u8 addr, - const u8 *snd_buf, u8 snd_len, - u8 *rcv_buf, u8 rcv_len) -{ - struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 buf[64]; - u8 id; - int ret; - - id = state->c++; - - ret = -EINVAL; - if (snd_len > 64 - 7 || rcv_len > 64 - 7) - goto failed; - - buf[0] = SYNC_BYTE_OUT; - buf[1] = id; - buf[2] = PCTV_CMD_I2C; - buf[3] = snd_len + 3; - buf[4] = addr << 1; - buf[5] = snd_len; - buf[6] = rcv_len; - - memcpy(buf + 7, snd_buf, snd_len); - - ret = dvb_usb_generic_rw(d, buf, 7 + snd_len, - buf, /* rcv_len */ 64, - /* delay_ms */ 0); - if (ret < 0) - goto failed; - - /* TT USB protocol error. */ - ret = -EIO; - if (SYNC_BYTE_IN != buf[0] || id != buf[1]) - goto failed; - - /* I2C device didn't respond as expected. */ - ret = -EREMOTEIO; - if (buf[5] < snd_len || buf[6] < rcv_len) - goto failed; - - memcpy(rcv_buf, buf + 7, rcv_len); - - return rcv_len; - -failed: - err("I2C error %d; %02X %02X %02X %02X %02X -> " - "%02X %02X %02X %02X %02X.", - ret, SYNC_BYTE_OUT, id, addr << 1, snd_len, rcv_len, - buf[0], buf[1], buf[4], buf[5], buf[6]); - - return ret; -} - -static int pctv452e_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msg, - int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adapter); - int i; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - u8 addr, snd_len, rcv_len, *snd_buf, *rcv_buf; - int ret; - - if (msg[i].flags & I2C_M_RD) { - addr = msg[i].addr; - snd_buf = NULL; - snd_len = 0; - rcv_buf = msg[i].buf; - rcv_len = msg[i].len; - } else { - addr = msg[i].addr; - snd_buf = msg[i].buf; - snd_len = msg[i].len; - rcv_buf = NULL; - rcv_len = 0; - } - - ret = pctv452e_i2c_msg(d, addr, snd_buf, snd_len, rcv_buf, - rcv_len); - if (ret < rcv_len) - break; - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 pctv452e_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) -{ - struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 b0[] = { 0xaa, 0, PCTV_CMD_RESET, 1, 0 }; - u8 rx[PCTV_ANSWER_LEN]; - int ret; - - info("%s: %d\n", __func__, i); - - if (!i) - return 0; - - if (state->initialized) - return 0; - - /* hmm where shoud this should go? */ - ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE); - if (ret != 0) - info("%s: Warning set interface returned: %d\n", - __func__, ret); - - /* this is a one-time initialization, dont know where to put */ - b0[1] = state->c++; - /* reset board */ - ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); - if (ret) - return ret; - - b0[1] = state->c++; - b0[4] = 1; - /* reset board (again?) */ - ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); - if (ret) - return ret; - - state->initialized = 1; - - return 0; -} - -static int pctv452e_rc_query(struct dvb_usb_device *d) -{ - struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 b[CMD_BUFFER_SIZE]; - u8 rx[PCTV_ANSWER_LEN]; - int ret, i; - u8 id = state->c++; - - /* prepare command header */ - b[0] = SYNC_BYTE_OUT; - b[1] = id; - b[2] = PCTV_CMD_IR; - b[3] = 0; - - /* send ir request */ - ret = dvb_usb_generic_rw(d, b, 4, rx, PCTV_ANSWER_LEN, 0); - if (ret != 0) - return ret; - - if (debug > 3) { - info("%s: read: %2d: %*ph: ", __func__, ret, 3, rx); - for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++) - info(" %02x", rx[i+3]); - - info("\n"); - } - - if ((rx[3] == 9) && (rx[12] & 0x01)) { - /* got a "press" event */ - state->last_rc_key = (rx[7] << 8) | rx[6]; - if (debug > 2) - info("%s: cmd=0x%02x sys=0x%02x\n", - __func__, rx[6], rx[7]); - - rc_keydown(d->rc_dev, state->last_rc_key, 0); - } else if (state->last_rc_key) { - rc_keyup(d->rc_dev); - state->last_rc_key = 0; - } - - return 0; -} - -static int pctv452e_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) -{ - const u8 mem_addr[] = { 0x1f, 0xcc }; - u8 encoded_mac[20]; - int ret; - - ret = -EAGAIN; - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - goto failed; - - ret = pctv452e_i2c_msg(d, I2C_ADDR_24C16, - mem_addr + 1, /* snd_len */ 1, - encoded_mac, /* rcv_len */ 20); - if (-EREMOTEIO == ret) - /* Caution! A 24C16 interprets 0xA2 0x1F 0xCC as a - byte write if /WC is low. */ - ret = pctv452e_i2c_msg(d, I2C_ADDR_24C64, - mem_addr, 2, - encoded_mac, 20); - - mutex_unlock(&d->i2c_mutex); - - if (20 != ret) - goto failed; - - ret = ttpci_eeprom_decode_mac(mac, encoded_mac); - if (0 != ret) - goto failed; - - return 0; - -failed: - memset(mac, 0, 6); - - return ret; -} - -static const struct stb0899_s1_reg pctv452e_init_dev[] = { - { STB0899_DISCNTRL1, 0x26 }, - { STB0899_DISCNTRL2, 0x80 }, - { STB0899_DISRX_ST0, 0x04 }, - { STB0899_DISRX_ST1, 0x20 }, - { STB0899_DISPARITY, 0x00 }, - { STB0899_DISFIFO, 0x00 }, - { STB0899_DISF22, 0x99 }, - { STB0899_DISF22RX, 0x85 }, /* 0xa8 */ - { STB0899_ACRPRESC, 0x11 }, - { STB0899_ACRDIV1, 0x0a }, - { STB0899_ACRDIV2, 0x05 }, - { STB0899_DACR1 , 0x00 }, - { STB0899_DACR2 , 0x00 }, - { STB0899_OUTCFG, 0x00 }, - { STB0899_MODECFG, 0x00 }, /* Inversion */ - { STB0899_IRQMSK_3, 0xf3 }, - { STB0899_IRQMSK_2, 0xfc }, - { STB0899_IRQMSK_1, 0xff }, - { STB0899_IRQMSK_0, 0xff }, - { STB0899_I2CCFG, 0x88 }, - { STB0899_I2CRPT, 0x58 }, - { STB0899_GPIO00CFG, 0x82 }, - { STB0899_GPIO01CFG, 0x82 }, /* LED: 0x02 green, 0x82 orange */ - { STB0899_GPIO02CFG, 0x82 }, - { STB0899_GPIO03CFG, 0x82 }, - { STB0899_GPIO04CFG, 0x82 }, - { STB0899_GPIO05CFG, 0x82 }, - { STB0899_GPIO06CFG, 0x82 }, - { STB0899_GPIO07CFG, 0x82 }, - { STB0899_GPIO08CFG, 0x82 }, - { STB0899_GPIO09CFG, 0x82 }, - { STB0899_GPIO10CFG, 0x82 }, - { STB0899_GPIO11CFG, 0x82 }, - { STB0899_GPIO12CFG, 0x82 }, - { STB0899_GPIO13CFG, 0x82 }, - { STB0899_GPIO14CFG, 0x82 }, - { STB0899_GPIO15CFG, 0x82 }, - { STB0899_GPIO16CFG, 0x82 }, - { STB0899_GPIO17CFG, 0x82 }, - { STB0899_GPIO18CFG, 0x82 }, - { STB0899_GPIO19CFG, 0x82 }, - { STB0899_GPIO20CFG, 0x82 }, - { STB0899_SDATCFG, 0xb8 }, - { STB0899_SCLTCFG, 0xba }, - { STB0899_AGCRFCFG, 0x1c }, /* 0x11 DVB-S; 0x1c DVB-S2 (1c, rjkm) */ - { STB0899_GPIO22, 0x82 }, - { STB0899_GPIO21, 0x91 }, - { STB0899_DIRCLKCFG, 0x82 }, - { STB0899_CLKOUT27CFG, 0x7e }, - { STB0899_STDBYCFG, 0x82 }, - { STB0899_CS0CFG, 0x82 }, - { STB0899_CS1CFG, 0x82 }, - { STB0899_DISEQCOCFG, 0x20 }, - { STB0899_NCOARSE, 0x15 }, /* 0x15 27Mhz, F/3 198MHz, F/6 108MHz */ - { STB0899_SYNTCTRL, 0x00 }, /* 0x00 CLKI, 0x02 XTALI */ - { STB0899_FILTCTRL, 0x00 }, - { STB0899_SYSCTRL, 0x00 }, - { STB0899_STOPCLK1, 0x20 }, /* orig: 0x00 budget-ci: 0x20 */ - { STB0899_STOPCLK2, 0x00 }, - { STB0899_INTBUFCTRL, 0x0a }, - { STB0899_AGC2I1, 0x00 }, - { STB0899_AGC2I2, 0x00 }, - { STB0899_AGCIQIN, 0x00 }, - { STB0899_TSTRES, 0x40 }, /* rjkm */ - { 0xffff, 0xff }, -}; - -static const struct stb0899_s1_reg pctv452e_init_s1_demod[] = { - { STB0899_DEMOD, 0x00 }, - { STB0899_RCOMPC, 0xc9 }, - { STB0899_AGC1CN, 0x01 }, - { STB0899_AGC1REF, 0x10 }, - { STB0899_RTC, 0x23 }, - { STB0899_TMGCFG, 0x4e }, - { STB0899_AGC2REF, 0x34 }, - { STB0899_TLSR, 0x84 }, - { STB0899_CFD, 0xf7 }, - { STB0899_ACLC, 0x87 }, - { STB0899_BCLC, 0x94 }, - { STB0899_EQON, 0x41 }, - { STB0899_LDT, 0xf1 }, - { STB0899_LDT2, 0xe3 }, - { STB0899_EQUALREF, 0xb4 }, - { STB0899_TMGRAMP, 0x10 }, - { STB0899_TMGTHD, 0x30 }, - { STB0899_IDCCOMP, 0xfd }, - { STB0899_QDCCOMP, 0xff }, - { STB0899_POWERI, 0x0c }, - { STB0899_POWERQ, 0x0f }, - { STB0899_RCOMP, 0x6c }, - { STB0899_AGCIQIN, 0x80 }, - { STB0899_AGC2I1, 0x06 }, - { STB0899_AGC2I2, 0x00 }, - { STB0899_TLIR, 0x30 }, - { STB0899_RTF, 0x7f }, - { STB0899_DSTATUS, 0x00 }, - { STB0899_LDI, 0xbc }, - { STB0899_CFRM, 0xea }, - { STB0899_CFRL, 0x31 }, - { STB0899_NIRM, 0x2b }, - { STB0899_NIRL, 0x80 }, - { STB0899_ISYMB, 0x1d }, - { STB0899_QSYMB, 0xa6 }, - { STB0899_SFRH, 0x2f }, - { STB0899_SFRM, 0x68 }, - { STB0899_SFRL, 0x40 }, - { STB0899_SFRUPH, 0x2f }, - { STB0899_SFRUPM, 0x68 }, - { STB0899_SFRUPL, 0x40 }, - { STB0899_EQUAI1, 0x02 }, - { STB0899_EQUAQ1, 0xff }, - { STB0899_EQUAI2, 0x04 }, - { STB0899_EQUAQ2, 0x05 }, - { STB0899_EQUAI3, 0x02 }, - { STB0899_EQUAQ3, 0xfd }, - { STB0899_EQUAI4, 0x03 }, - { STB0899_EQUAQ4, 0x07 }, - { STB0899_EQUAI5, 0x08 }, - { STB0899_EQUAQ5, 0xf5 }, - { STB0899_DSTATUS2, 0x00 }, - { STB0899_VSTATUS, 0x00 }, - { STB0899_VERROR, 0x86 }, - { STB0899_IQSWAP, 0x2a }, - { STB0899_ECNT1M, 0x00 }, - { STB0899_ECNT1L, 0x00 }, - { STB0899_ECNT2M, 0x00 }, - { STB0899_ECNT2L, 0x00 }, - { STB0899_ECNT3M, 0x0a }, - { STB0899_ECNT3L, 0xad }, - { STB0899_FECAUTO1, 0x06 }, - { STB0899_FECM, 0x01 }, - { STB0899_VTH12, 0xb0 }, - { STB0899_VTH23, 0x7a }, - { STB0899_VTH34, 0x58 }, - { STB0899_VTH56, 0x38 }, - { STB0899_VTH67, 0x34 }, - { STB0899_VTH78, 0x24 }, - { STB0899_PRVIT, 0xff }, - { STB0899_VITSYNC, 0x19 }, - { STB0899_RSULC, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ - { STB0899_TSULC, 0x42 }, - { STB0899_RSLLC, 0x41 }, - { STB0899_TSLPL, 0x12 }, - { STB0899_TSCFGH, 0x0c }, - { STB0899_TSCFGM, 0x00 }, - { STB0899_TSCFGL, 0x00 }, - { STB0899_TSOUT, 0x69 }, /* 0x0d for CAM */ - { STB0899_RSSYNCDEL, 0x00 }, - { STB0899_TSINHDELH, 0x02 }, - { STB0899_TSINHDELM, 0x00 }, - { STB0899_TSINHDELL, 0x00 }, - { STB0899_TSLLSTKM, 0x1b }, - { STB0899_TSLLSTKL, 0xb3 }, - { STB0899_TSULSTKM, 0x00 }, - { STB0899_TSULSTKL, 0x00 }, - { STB0899_PCKLENUL, 0xbc }, - { STB0899_PCKLENLL, 0xcc }, - { STB0899_RSPCKLEN, 0xbd }, - { STB0899_TSSTATUS, 0x90 }, - { STB0899_ERRCTRL1, 0xb6 }, - { STB0899_ERRCTRL2, 0x95 }, - { STB0899_ERRCTRL3, 0x8d }, - { STB0899_DMONMSK1, 0x27 }, - { STB0899_DMONMSK0, 0x03 }, - { STB0899_DEMAPVIT, 0x5c }, - { STB0899_PLPARM, 0x19 }, - { STB0899_PDELCTRL, 0x48 }, - { STB0899_PDELCTRL2, 0x00 }, - { STB0899_BBHCTRL1, 0x00 }, - { STB0899_BBHCTRL2, 0x00 }, - { STB0899_HYSTTHRESH, 0x77 }, - { STB0899_MATCSTM, 0x00 }, - { STB0899_MATCSTL, 0x00 }, - { STB0899_UPLCSTM, 0x00 }, - { STB0899_UPLCSTL, 0x00 }, - { STB0899_DFLCSTM, 0x00 }, - { STB0899_DFLCSTL, 0x00 }, - { STB0899_SYNCCST, 0x00 }, - { STB0899_SYNCDCSTM, 0x00 }, - { STB0899_SYNCDCSTL, 0x00 }, - { STB0899_ISI_ENTRY, 0x00 }, - { STB0899_ISI_BIT_EN, 0x00 }, - { STB0899_MATSTRM, 0xf0 }, - { STB0899_MATSTRL, 0x02 }, - { STB0899_UPLSTRM, 0x45 }, - { STB0899_UPLSTRL, 0x60 }, - { STB0899_DFLSTRM, 0xe3 }, - { STB0899_DFLSTRL, 0x00 }, - { STB0899_SYNCSTR, 0x47 }, - { STB0899_SYNCDSTRM, 0x05 }, - { STB0899_SYNCDSTRL, 0x18 }, - { STB0899_CFGPDELSTATUS1, 0x19 }, - { STB0899_CFGPDELSTATUS2, 0x2b }, - { STB0899_BBFERRORM, 0x00 }, - { STB0899_BBFERRORL, 0x01 }, - { STB0899_UPKTERRORM, 0x00 }, - { STB0899_UPKTERRORL, 0x00 }, - { 0xffff, 0xff }, -}; - -static struct stb0899_config stb0899_config = { - .init_dev = pctv452e_init_dev, - .init_s2_demod = stb0899_s2_init_2, - .init_s1_demod = pctv452e_init_s1_demod, - .init_s2_fec = stb0899_s2_init_4, - .init_tst = stb0899_s1_init_5, - - .demod_address = I2C_ADDR_STB0899, /* I2C Address */ - .block_sync_mode = STB0899_SYNC_FORCED, /* ? */ - - .xtal_freq = 27000000, /* Assume Hz ? */ - .inversion = IQ_SWAP_ON, /* ? */ - - .lo_clk = 76500000, - .hi_clk = 99000000, - - .ts_output_mode = 0, /* Use parallel mode */ - .clock_polarity = 0, - .data_clk_parity = 0, - .fec_mode = 0, - - .esno_ave = STB0899_DVBS2_ESNO_AVE, - .esno_quant = STB0899_DVBS2_ESNO_QUANT, - .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, - .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, - .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, - .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, - .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, - .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, - .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, - - .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, - .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, - .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, - .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, - - .tuner_get_frequency = stb6100_get_frequency, - .tuner_set_frequency = stb6100_set_frequency, - .tuner_set_bandwidth = stb6100_set_bandwidth, - .tuner_get_bandwidth = stb6100_get_bandwidth, - .tuner_set_rfsiggain = NULL, - - /* helper for switching LED green/orange */ - .postproc = pctv45e_postproc -}; - -static struct stb6100_config stb6100_config = { - .tuner_address = I2C_ADDR_STB6100, - .refclock = 27000000 -}; - - -static struct i2c_algorithm pctv452e_i2c_algo = { - .master_xfer = pctv452e_i2c_xfer, - .functionality = pctv452e_i2c_func -}; - -static int pctv452e_frontend_attach(struct dvb_usb_adapter *a) -{ - struct usb_device_id *id; - - a->fe_adap[0].fe = dvb_attach(stb0899_attach, &stb0899_config, - &a->dev->i2c_adap); - if (!a->fe_adap[0].fe) - return -ENODEV; - if ((dvb_attach(lnbp22_attach, a->fe_adap[0].fe, - &a->dev->i2c_adap)) == 0) - err("Cannot attach lnbp22\n"); - - id = a->dev->desc->warm_ids[0]; - if (USB_VID_TECHNOTREND == id->idVendor - && USB_PID_TECHNOTREND_CONNECT_S2_3650_CI == id->idProduct) - /* Error ignored. */ - tt3650_ci_init(a); - - return 0; -} - -static int pctv452e_tuner_attach(struct dvb_usb_adapter *a) -{ - if (!a->fe_adap[0].fe) - return -ENODEV; - if (dvb_attach(stb6100_attach, a->fe_adap[0].fe, &stb6100_config, - &a->dev->i2c_adap) == 0) { - err("%s failed\n", __func__); - return -ENODEV; - } - - return 0; -} - -static struct usb_device_id pctv452e_usb_table[] = { - {USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_452E)}, - {USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_CONNECT_S2_3600)}, - {USB_DEVICE(USB_VID_TECHNOTREND, - USB_PID_TECHNOTREND_CONNECT_S2_3650_CI)}, - {} -}; -MODULE_DEVICE_TABLE(usb, pctv452e_usb_table); - -static struct dvb_usb_device_properties pctv452e_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */ - .usb_ctrl = DEVICE_SPECIFIC, - - .size_of_priv = sizeof(struct pctv452e_state), - - .power_ctrl = pctv452e_power_ctrl, - - .rc.core = { - .rc_codes = RC_MAP_DIB0700_RC5_TABLE, - .allowed_protos = RC_TYPE_UNKNOWN, - .rc_query = pctv452e_rc_query, - .rc_interval = 100, - }, - - .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - .frontend_attach = pctv452e_frontend_attach, - .tuner_attach = pctv452e_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 4, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1 - } - } - }, - } }, - } }, - - .i2c_algo = &pctv452e_i2c_algo, - - .generic_bulk_ctrl_endpoint = 1, /* allow generice rw function */ - - .num_device_descs = 1, - .devices = { - { .name = "PCTV HDTV USB", - .cold_ids = { NULL, NULL }, /* this is a warm only device */ - .warm_ids = { &pctv452e_usb_table[0], NULL } - }, - { 0 }, - } -}; - -static struct dvb_usb_device_properties tt_connect_s2_3600_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */ - .usb_ctrl = DEVICE_SPECIFIC, - - .size_of_priv = sizeof(struct pctv452e_state), - - .power_ctrl = pctv452e_power_ctrl, - .read_mac_address = pctv452e_read_mac_address, - - .rc.core = { - .rc_codes = RC_MAP_TT_1500, - .allowed_protos = RC_TYPE_UNKNOWN, - .rc_query = pctv452e_rc_query, - .rc_interval = 100, - }, - - .num_adapters = 1, - .adapter = {{ - .num_frontends = 1, - .fe = {{ - .frontend_attach = pctv452e_frontend_attach, - .tuner_attach = pctv452e_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 7, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1 - } - } - }, - - } }, - } }, - - .i2c_algo = &pctv452e_i2c_algo, - - .generic_bulk_ctrl_endpoint = 1, /* allow generic rw function*/ - - .num_device_descs = 2, - .devices = { - { .name = "Technotrend TT Connect S2-3600", - .cold_ids = { NULL, NULL }, /* this is a warm only device */ - .warm_ids = { &pctv452e_usb_table[1], NULL } - }, - { .name = "Technotrend TT Connect S2-3650-CI", - .cold_ids = { NULL, NULL }, - .warm_ids = { &pctv452e_usb_table[2], NULL } - }, - { 0 }, - } -}; - -static void pctv452e_usb_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - - tt3650_ci_uninit(d); - dvb_usb_device_exit(intf); -} - -static int pctv452e_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - if (0 == dvb_usb_device_init(intf, &pctv452e_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &tt_connect_s2_3600_properties, - THIS_MODULE, NULL, adapter_nr)) - return 0; - - return -ENODEV; -} - -static struct usb_driver pctv452e_usb_driver = { - .name = "pctv452e", - .probe = pctv452e_usb_probe, - .disconnect = pctv452e_usb_disconnect, - .id_table = pctv452e_usb_table, -}; - -module_usb_driver(pctv452e_usb_driver); - -MODULE_AUTHOR("Dominik Kuhlen <dkuhlen@gmx.net>"); -MODULE_AUTHOR("Andre Weidemann <Andre.Weidemann@web.de>"); -MODULE_AUTHOR("Michael H. Schimek <mschimek@gmx.at>"); -MODULE_DESCRIPTION("Pinnacle PCTV HDTV USB DVB / TT connect S2-3600 Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c deleted file mode 100644 index acefaa89cc53..000000000000 --- a/drivers/media/dvb/dvb-usb/technisat-usb2.c +++ /dev/null @@ -1,789 +0,0 @@ -/* - * Linux driver for Technisat DVB-S/S2 USB 2.0 device - * - * Copyright (C) 2010 Patrick Boettcher, - * Kernel Labs Inc. PO Box 745, St James, NY 11780 - * - * Development was sponsored by Technisat Digital UK Limited, whose - * registered office is Witan Gate House 500 - 600 Witan Gate West, - * Milton Keynes, MK9 1SH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * THIS PROGRAM IS PROVIDED "AS IS" AND BOTH THE COPYRIGHT HOLDER AND - * TECHNISAT DIGITAL UK LTD DISCLAIM ALL WARRANTIES WITH REGARD TO - * THIS PROGRAM INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR - * FITNESS FOR A PARTICULAR PURPOSE. NEITHER THE COPYRIGHT HOLDER - * NOR TECHNISAT DIGITAL UK LIMITED SHALL BE LIABLE FOR ANY SPECIAL, - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER - * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR - * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS PROGRAM. See the - * GNU General Public License for more details. - */ - -#define DVB_USB_LOG_PREFIX "technisat-usb2" -#include "dvb-usb.h" - -#include "stv6110x.h" -#include "stv090x.h" - -/* module parameters */ -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, - "set debugging level (bit-mask: 1=info,2=eeprom,4=i2c,8=rc)." \ - DVB_USB_DEBUG_STATUS); - -/* disables all LED control command and - * also does not start the signal polling thread */ -static int disable_led_control; -module_param(disable_led_control, int, 0444); -MODULE_PARM_DESC(disable_led_control, - "disable LED control of the device " - "(default: 0 - LED control is active)."); - -/* device private data */ -struct technisat_usb2_state { - struct dvb_usb_device *dev; - struct delayed_work green_led_work; - u8 power_state; - - u16 last_scan_code; -}; - -/* debug print helpers */ -#define deb_info(args...) dprintk(debug, 0x01, args) -#define deb_eeprom(args...) dprintk(debug, 0x02, args) -#define deb_i2c(args...) dprintk(debug, 0x04, args) -#define deb_rc(args...) dprintk(debug, 0x08, args) - -/* vendor requests */ -#define SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST 0xB3 -#define SET_FRONT_END_RESET_VENDOR_REQUEST 0xB4 -#define GET_VERSION_INFO_VENDOR_REQUEST 0xB5 -#define SET_GREEN_LED_VENDOR_REQUEST 0xB6 -#define SET_RED_LED_VENDOR_REQUEST 0xB7 -#define GET_IR_DATA_VENDOR_REQUEST 0xB8 -#define SET_LED_TIMER_DIVIDER_VENDOR_REQUEST 0xB9 -#define SET_USB_REENUMERATION 0xBA - -/* i2c-access methods */ -#define I2C_SPEED_100KHZ_BIT 0x40 - -#define I2C_STATUS_NAK 7 -#define I2C_STATUS_OK 8 - -static int technisat_usb2_i2c_access(struct usb_device *udev, - u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen) -{ - u8 b[64]; - int ret, actual_length; - - deb_i2c("i2c-access: %02x, tx: ", device_addr); - debug_dump(tx, txlen, deb_i2c); - deb_i2c(" "); - - if (txlen > 62) { - err("i2c TX buffer can't exceed 62 bytes (dev 0x%02x)", - device_addr); - txlen = 62; - } - if (rxlen > 62) { - err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)", - device_addr); - txlen = 62; - } - - b[0] = I2C_SPEED_100KHZ_BIT; - b[1] = device_addr << 1; - - if (rx != NULL) { - b[0] |= rxlen; - b[1] |= 1; - } - - memcpy(&b[2], tx, txlen); - ret = usb_bulk_msg(udev, - usb_sndbulkpipe(udev, 0x01), - b, 2 + txlen, - NULL, 1000); - - if (ret < 0) { - err("i2c-error: out failed %02x = %d", device_addr, ret); - return -ENODEV; - } - - ret = usb_bulk_msg(udev, - usb_rcvbulkpipe(udev, 0x01), - b, 64, &actual_length, 1000); - if (ret < 0) { - err("i2c-error: in failed %02x = %d", device_addr, ret); - return -ENODEV; - } - - if (b[0] != I2C_STATUS_OK) { - err("i2c-error: %02x = %d", device_addr, b[0]); - /* handle tuner-i2c-nak */ - if (!(b[0] == I2C_STATUS_NAK && - device_addr == 0x60 - /* && device_is_technisat_usb2 */)) - return -ENODEV; - } - - deb_i2c("status: %d, ", b[0]); - - if (rx != NULL) { - memcpy(rx, &b[2], rxlen); - - deb_i2c("rx (%d): ", rxlen); - debug_dump(rx, rxlen, deb_i2c); - } - - deb_i2c("\n"); - - return 0; -} - -static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, - int num) -{ - int ret = 0, i; - struct dvb_usb_device *d = i2c_get_adapdata(adap); - - /* Ensure nobody else hits the i2c bus while we're sending our - sequence of messages, (such as the remote control thread) */ - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - for (i = 0; i < num; i++) { - if (i+1 < num && msg[i+1].flags & I2C_M_RD) { - ret = technisat_usb2_i2c_access(d->udev, msg[i+1].addr, - msg[i].buf, msg[i].len, - msg[i+1].buf, msg[i+1].len); - if (ret != 0) - break; - i++; - } else { - ret = technisat_usb2_i2c_access(d->udev, msg[i].addr, - msg[i].buf, msg[i].len, - NULL, 0); - if (ret != 0) - break; - } - } - - if (ret == 0) - ret = i; - - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static u32 technisat_usb2_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm technisat_usb2_i2c_algo = { - .master_xfer = technisat_usb2_i2c_xfer, - .functionality = technisat_usb2_i2c_func, -}; - -#if 0 -static void technisat_usb2_frontend_reset(struct usb_device *udev) -{ - usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - SET_FRONT_END_RESET_VENDOR_REQUEST, - USB_TYPE_VENDOR | USB_DIR_OUT, - 10, 0, - NULL, 0, 500); -} -#endif - -/* LED control */ -enum technisat_usb2_led_state { - LED_OFF, - LED_BLINK, - LED_ON, - LED_UNDEFINED -}; - -static int technisat_usb2_set_led(struct dvb_usb_device *d, int red, enum technisat_usb2_led_state state) -{ - int ret; - - u8 led[8] = { - red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST, - 0 - }; - - if (disable_led_control && state != LED_OFF) - return 0; - - switch (state) { - case LED_ON: - led[1] = 0x82; - break; - case LED_BLINK: - led[1] = 0x82; - if (red) { - led[2] = 0x02; - led[3] = 10; - led[4] = 10; - } else { - led[2] = 0xff; - led[3] = 50; - led[4] = 50; - } - led[5] = 1; - break; - - default: - case LED_OFF: - led[1] = 0x80; - break; - } - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), - red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST, - USB_TYPE_VENDOR | USB_DIR_OUT, - 0, 0, - led, sizeof(led), 500); - - mutex_unlock(&d->i2c_mutex); - return ret; -} - -static int technisat_usb2_set_led_timer(struct dvb_usb_device *d, u8 red, u8 green) -{ - int ret; - u8 b = 0; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), - SET_LED_TIMER_DIVIDER_VENDOR_REQUEST, - USB_TYPE_VENDOR | USB_DIR_OUT, - (red << 8) | green, 0, - &b, 1, 500); - - mutex_unlock(&d->i2c_mutex); - - return ret; -} - -static void technisat_usb2_green_led_control(struct work_struct *work) -{ - struct technisat_usb2_state *state = - container_of(work, struct technisat_usb2_state, green_led_work.work); - struct dvb_frontend *fe = state->dev->adapter[0].fe_adap[0].fe; - - if (state->power_state == 0) - goto schedule; - - if (fe != NULL) { - enum fe_status status; - - if (fe->ops.read_status(fe, &status) != 0) - goto schedule; - - if (status & FE_HAS_LOCK) { - u32 ber; - - if (fe->ops.read_ber(fe, &ber) != 0) - goto schedule; - - if (ber > 1000) - technisat_usb2_set_led(state->dev, 0, LED_BLINK); - else - technisat_usb2_set_led(state->dev, 0, LED_ON); - } else - technisat_usb2_set_led(state->dev, 0, LED_OFF); - } - -schedule: - schedule_delayed_work(&state->green_led_work, - msecs_to_jiffies(500)); -} - -/* method to find out whether the firmware has to be downloaded or not */ -static int technisat_usb2_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, int *cold) -{ - int ret; - u8 version[3]; - - /* first select the interface */ - if (usb_set_interface(udev, 0, 1) != 0) - err("could not set alternate setting to 0"); - else - info("set alternate setting"); - - *cold = 0; /* by default do not download a firmware - just in case something is wrong */ - - ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - GET_VERSION_INFO_VENDOR_REQUEST, - USB_TYPE_VENDOR | USB_DIR_IN, - 0, 0, - version, sizeof(version), 500); - - if (ret < 0) - *cold = 1; - else { - info("firmware version: %d.%d", version[1], version[2]); - *cold = 0; - } - - return 0; -} - -/* power control */ -static int technisat_usb2_power_ctrl(struct dvb_usb_device *d, int level) -{ - struct technisat_usb2_state *state = d->priv; - - state->power_state = level; - - if (disable_led_control) - return 0; - - /* green led is turned off in any case - will be turned on when tuning */ - technisat_usb2_set_led(d, 0, LED_OFF); - /* red led is turned on all the time */ - technisat_usb2_set_led(d, 1, LED_ON); - return 0; -} - -/* mac address reading - from the eeprom */ -#if 0 -static void technisat_usb2_eeprom_dump(struct dvb_usb_device *d) -{ - u8 reg; - u8 b[16]; - int i, j; - - /* full EEPROM dump */ - for (j = 0; j < 256 * 4; j += 16) { - reg = j; - if (technisat_usb2_i2c_access(d->udev, 0x50 + j / 256, ®, 1, b, 16) != 0) - break; - - deb_eeprom("EEPROM: %01x%02x: ", j / 256, reg); - for (i = 0; i < 16; i++) - deb_eeprom("%02x ", b[i]); - deb_eeprom("\n"); - } -} -#endif - -static u8 technisat_usb2_calc_lrc(const u8 *b, u16 length) -{ - u8 lrc = 0; - while (--length) - lrc ^= *b++; - return lrc; -} - -static int technisat_usb2_eeprom_lrc_read(struct dvb_usb_device *d, - u16 offset, u8 *b, u16 length, u8 tries) -{ - u8 bo = offset & 0xff; - struct i2c_msg msg[] = { - { - .addr = 0x50 | ((offset >> 8) & 0x3), - .buf = &bo, - .len = 1 - }, { - .addr = 0x50 | ((offset >> 8) & 0x3), - .flags = I2C_M_RD, - .buf = b, - .len = length - } - }; - - while (tries--) { - int status; - - if (i2c_transfer(&d->i2c_adap, msg, 2) != 2) - break; - - status = - technisat_usb2_calc_lrc(b, length - 1) == b[length - 1]; - - if (status) - return 0; - } - - return -EREMOTEIO; -} - -#define EEPROM_MAC_START 0x3f8 -#define EEPROM_MAC_TOTAL 8 -static int technisat_usb2_read_mac_address(struct dvb_usb_device *d, - u8 mac[]) -{ - u8 buf[EEPROM_MAC_TOTAL]; - - if (technisat_usb2_eeprom_lrc_read(d, EEPROM_MAC_START, - buf, EEPROM_MAC_TOTAL, 4) != 0) - return -ENODEV; - - memcpy(mac, buf, 6); - return 0; -} - -/* frontend attach */ -static int technisat_usb2_set_voltage(struct dvb_frontend *fe, - fe_sec_voltage_t voltage) -{ - int i; - u8 gpio[3] = { 0 }; /* 0 = 2, 1 = 3, 2 = 4 */ - - gpio[2] = 1; /* high - voltage ? */ - - switch (voltage) { - case SEC_VOLTAGE_13: - gpio[0] = 1; - break; - case SEC_VOLTAGE_18: - gpio[0] = 1; - gpio[1] = 1; - break; - default: - case SEC_VOLTAGE_OFF: - break; - } - - for (i = 0; i < 3; i++) - if (stv090x_set_gpio(fe, i+2, 0, gpio[i], 0) != 0) - return -EREMOTEIO; - return 0; -} - -static struct stv090x_config technisat_usb2_stv090x_config = { - .device = STV0903, - .demod_mode = STV090x_SINGLE, - .clk_mode = STV090x_CLK_EXT, - - .xtal = 8000000, - .address = 0x68, - - .ts1_mode = STV090x_TSMODE_DVBCI, - .ts1_clk = 13400000, - .ts1_tei = 1, - - .repeater_level = STV090x_RPTLEVEL_64, - - .tuner_bbgain = 6, -}; - -static struct stv6110x_config technisat_usb2_stv6110x_config = { - .addr = 0x60, - .refclk = 16000000, - .clk_div = 2, -}; - -static int technisat_usb2_frontend_attach(struct dvb_usb_adapter *a) -{ - struct usb_device *udev = a->dev->udev; - int ret; - - a->fe_adap[0].fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config, - &a->dev->i2c_adap, STV090x_DEMODULATOR_0); - - if (a->fe_adap[0].fe) { - struct stv6110x_devctl *ctl; - - ctl = dvb_attach(stv6110x_attach, - a->fe_adap[0].fe, - &technisat_usb2_stv6110x_config, - &a->dev->i2c_adap); - - if (ctl) { - technisat_usb2_stv090x_config.tuner_init = ctl->tuner_init; - technisat_usb2_stv090x_config.tuner_sleep = ctl->tuner_sleep; - technisat_usb2_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; - technisat_usb2_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; - technisat_usb2_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; - technisat_usb2_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; - technisat_usb2_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; - technisat_usb2_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; - technisat_usb2_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; - technisat_usb2_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; - technisat_usb2_stv090x_config.tuner_get_status = ctl->tuner_get_status; - - /* call the init function once to initialize - tuner's clock output divider and demod's - master clock */ - if (a->fe_adap[0].fe->ops.init) - a->fe_adap[0].fe->ops.init(a->fe_adap[0].fe); - - if (mutex_lock_interruptible(&a->dev->i2c_mutex) < 0) - return -EAGAIN; - - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST, - USB_TYPE_VENDOR | USB_DIR_OUT, - 0, 0, - NULL, 0, 500); - mutex_unlock(&a->dev->i2c_mutex); - - if (ret != 0) - err("could not set IF_CLK to external"); - - a->fe_adap[0].fe->ops.set_voltage = technisat_usb2_set_voltage; - - /* if everything was successful assign a nice name to the frontend */ - strlcpy(a->fe_adap[0].fe->ops.info.name, a->dev->desc->name, - sizeof(a->fe_adap[0].fe->ops.info.name)); - } else { - dvb_frontend_detach(a->fe_adap[0].fe); - a->fe_adap[0].fe = NULL; - } - } - - technisat_usb2_set_led_timer(a->dev, 1, 1); - - return a->fe_adap[0].fe == NULL ? -ENODEV : 0; -} - -/* Remote control */ - -/* the device is giving providing raw IR-signals to the host mapping - * it only to one remote control is just the default implementation - */ -#define NOMINAL_IR_BIT_TRANSITION_TIME_US 889 -#define NOMINAL_IR_BIT_TIME_US (2 * NOMINAL_IR_BIT_TRANSITION_TIME_US) - -#define FIRMWARE_CLOCK_TICK 83333 -#define FIRMWARE_CLOCK_DIVISOR 256 - -#define IR_PERCENT_TOLERANCE 15 - -#define NOMINAL_IR_BIT_TRANSITION_TICKS ((NOMINAL_IR_BIT_TRANSITION_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK) -#define NOMINAL_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICKS / FIRMWARE_CLOCK_DIVISOR) - -#define NOMINAL_IR_BIT_TIME_TICKS ((NOMINAL_IR_BIT_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK) -#define NOMINAL_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICKS / FIRMWARE_CLOCK_DIVISOR) - -#define MINIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT - ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) -#define MAXIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT + ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) - -#define MINIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT - ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) -#define MAXIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT + ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) - -static int technisat_usb2_get_ir(struct dvb_usb_device *d) -{ - u8 buf[62], *b; - int ret; - struct ir_raw_event ev; - - buf[0] = GET_IR_DATA_VENDOR_REQUEST; - buf[1] = 0x08; - buf[2] = 0x8f; - buf[3] = MINIMUM_IR_BIT_TRANSITION_TICK_COUNT; - buf[4] = MAXIMUM_IR_BIT_TIME_TICK_COUNT; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), - GET_IR_DATA_VENDOR_REQUEST, - USB_TYPE_VENDOR | USB_DIR_OUT, - 0, 0, - buf, 5, 500); - if (ret < 0) - goto unlock; - - buf[1] = 0; - buf[2] = 0; - ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), - GET_IR_DATA_VENDOR_REQUEST, - USB_TYPE_VENDOR | USB_DIR_IN, - 0x8080, 0, - buf, sizeof(buf), 500); - -unlock: - mutex_unlock(&d->i2c_mutex); - - if (ret < 0) - return ret; - - if (ret == 1) - return 0; /* no key pressed */ - - /* decoding */ - b = buf+1; - -#if 0 - deb_rc("RC: %d ", ret); - debug_dump(b, ret, deb_rc); -#endif - - ev.pulse = 0; - while (1) { - ev.pulse = !ev.pulse; - ev.duration = (*b * FIRMWARE_CLOCK_DIVISOR * FIRMWARE_CLOCK_TICK) / 1000; - ir_raw_event_store(d->rc_dev, &ev); - - b++; - if (*b == 0xff) { - ev.pulse = 0; - ev.duration = 888888*2; - ir_raw_event_store(d->rc_dev, &ev); - break; - } - } - - ir_raw_event_handle(d->rc_dev); - - return 1; -} - -static int technisat_usb2_rc_query(struct dvb_usb_device *d) -{ - int ret = technisat_usb2_get_ir(d); - - if (ret < 0) - return ret; - - if (ret == 0) - return 0; - - if (!disable_led_control) - technisat_usb2_set_led(d, 1, LED_BLINK); - - return 0; -} - -/* DVB-USB and USB stuff follows */ -static struct usb_device_id technisat_usb2_id_table[] = { - { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_DVB_S2) }, - { 0 } /* Terminating entry */ -}; - -/* device description */ -static struct dvb_usb_device_properties technisat_usb2_devices = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .identify_state = technisat_usb2_identify_state, - .firmware = "dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw", - - .size_of_priv = sizeof(struct technisat_usb2_state), - - .i2c_algo = &technisat_usb2_i2c_algo, - - .power_ctrl = technisat_usb2_power_ctrl, - .read_mac_address = technisat_usb2_read_mac_address, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = technisat_usb2_frontend_attach, - - .stream = { - .type = USB_ISOC, - .count = 8, - .endpoint = 0x2, - .u = { - .isoc = { - .framesperurb = 32, - .framesize = 2048, - .interval = 3, - } - } - }, - }}, - .size_of_priv = 0, - }, - }, - - .num_device_descs = 1, - .devices = { - { "Technisat SkyStar USB HD (DVB-S/S2)", - { &technisat_usb2_id_table[0], NULL }, - { NULL }, - }, - }, - - .rc.core = { - .rc_interval = 100, - .rc_codes = RC_MAP_TECHNISAT_USB2, - .module_name = "technisat-usb2", - .rc_query = technisat_usb2_rc_query, - .allowed_protos = RC_TYPE_ALL, - .driver_type = RC_DRIVER_IR_RAW, - } -}; - -static int technisat_usb2_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct dvb_usb_device *dev; - - if (dvb_usb_device_init(intf, &technisat_usb2_devices, THIS_MODULE, - &dev, adapter_nr) != 0) - return -ENODEV; - - if (dev) { - struct technisat_usb2_state *state = dev->priv; - state->dev = dev; - - if (!disable_led_control) { - INIT_DELAYED_WORK(&state->green_led_work, - technisat_usb2_green_led_control); - schedule_delayed_work(&state->green_led_work, - msecs_to_jiffies(500)); - } - } - - return 0; -} - -static void technisat_usb2_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *dev = usb_get_intfdata(intf); - - /* work and stuff was only created when the device is is hot-state */ - if (dev != NULL) { - struct technisat_usb2_state *state = dev->priv; - if (state != NULL) - cancel_delayed_work_sync(&state->green_led_work); - } - - dvb_usb_device_exit(intf); -} - -static struct usb_driver technisat_usb2_driver = { - .name = "dvb_usb_technisat_usb2", - .probe = technisat_usb2_probe, - .disconnect = technisat_usb2_disconnect, - .id_table = technisat_usb2_id_table, -}; - -module_usb_driver(technisat_usb2_driver); - -MODULE_AUTHOR("Patrick Boettcher <pboettcher@kernellabs.com>"); -MODULE_DESCRIPTION("Driver for Technisat DVB-S/S2 USB 2.0 device"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c deleted file mode 100644 index e53a1061cb8e..000000000000 --- a/drivers/media/dvb/dvb-usb/ttusb2.c +++ /dev/null @@ -1,820 +0,0 @@ -/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones - * (e.g. Pinnacle 400e DVB-S USB2.0). - * - * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes. - * - * TDA8263 + TDA10086 - * - * I2C addresses: - * 0x08 - LNBP21PD - LNB power supply - * 0x0e - TDA10086 - Demodulator - * 0x50 - FX2 eeprom - * 0x60 - TDA8263 - Tuner - * 0x78 ??? - * - * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> - * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> - * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#define DVB_USB_LOG_PREFIX "ttusb2" -#include "dvb-usb.h" - -#include "ttusb2.h" - -#include "tda826x.h" -#include "tda10086.h" -#include "tda1002x.h" -#include "tda10048.h" -#include "tda827x.h" -#include "lnbp21.h" -/* CA */ -#include "dvb_ca_en50221.h" - -/* debug */ -static int dvb_usb_ttusb2_debug; -#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args) -module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); -static int dvb_usb_ttusb2_debug_ci; -module_param_named(debug_ci,dvb_usb_ttusb2_debug_ci, int, 0644); -MODULE_PARM_DESC(debug_ci, "set debugging ci." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define ci_dbg(format, arg...) \ -do { \ - if (dvb_usb_ttusb2_debug_ci) \ - printk(KERN_DEBUG DVB_USB_LOG_PREFIX \ - ": %s " format "\n" , __func__, ## arg); \ -} while (0) - -enum { - TT3650_CMD_CI_TEST = 0x40, - TT3650_CMD_CI_RD_CTRL, - TT3650_CMD_CI_WR_CTRL, - TT3650_CMD_CI_RD_ATTR, - TT3650_CMD_CI_WR_ATTR, - TT3650_CMD_CI_RESET, - TT3650_CMD_CI_SET_VIDEO_PORT -}; - -struct ttusb2_state { - struct dvb_ca_en50221 ca; - struct mutex ca_mutex; - u8 id; - u16 last_rc_key; -}; - -static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, - u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - struct ttusb2_state *st = d->priv; - u8 *s, *r = NULL; - int ret = 0; - - s = kzalloc(wlen+4, GFP_KERNEL); - if (!s) - return -ENOMEM; - - r = kzalloc(64, GFP_KERNEL); - if (!r) { - kfree(s); - return -ENOMEM; - } - - s[0] = 0xaa; - s[1] = ++st->id; - s[2] = cmd; - s[3] = wlen; - memcpy(&s[4],wbuf,wlen); - - ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0); - - if (ret != 0 || - r[0] != 0x55 || - r[1] != s[1] || - r[2] != cmd || - (rlen > 0 && r[3] != rlen)) { - warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]); - kfree(s); - kfree(r); - return -EIO; - } - - if (rlen > 0) - memcpy(rbuf, &r[4], rlen); - - kfree(s); - kfree(r); - - return 0; -} - -/* ci */ -static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) -{ - int ret; - u8 rx[60];/* (64 -4) */ - ret = ttusb2_msg(d, cmd, data, write_len, rx, read_len); - if (!ret) - memcpy(data, rx, read_len); - return ret; -} - -static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) -{ - struct dvb_usb_device *d = ca->data; - struct ttusb2_state *state = d->priv; - int ret; - - mutex_lock(&state->ca_mutex); - ret = tt3650_ci_msg(d, cmd, data, write_len, read_len); - mutex_unlock(&state->ca_mutex); - - return ret; -} - -static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) -{ - u8 buf[3]; - int ret = 0; - - if (slot) - return -EINVAL; - - buf[0] = (address >> 8) & 0x0F; - buf[1] = address; - - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3); - - ci_dbg("%04x -> %d 0x%02x", address, ret, buf[2]); - - if (ret < 0) - return ret; - - return buf[2]; -} - -static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) -{ - u8 buf[3]; - - ci_dbg("%d 0x%04x 0x%02x", slot, address, value); - - if (slot) - return -EINVAL; - - buf[0] = (address >> 8) & 0x0F; - buf[1] = address; - buf[2] = value; - - return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3); -} - -static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) -{ - u8 buf[2]; - int ret; - - if (slot) - return -EINVAL; - - buf[0] = address & 3; - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2); - - ci_dbg("0x%02x -> %d 0x%02x", address, ret, buf[1]); - - if (ret < 0) - return ret; - - return buf[1]; -} - -static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) -{ - u8 buf[2]; - - ci_dbg("%d 0x%02x 0x%02x", slot, address, value); - - if (slot) - return -EINVAL; - - buf[0] = address; - buf[1] = value; - - return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2); -} - -static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, int slot, int enable) -{ - u8 buf[1]; - int ret; - - ci_dbg("%d %d", slot, enable); - - if (slot) - return -EINVAL; - - buf[0] = enable; - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); - if (ret < 0) - return ret; - - if (enable != buf[0]) { - err("CI not %sabled.", enable ? "en" : "dis"); - return -EIO; - } - - return 0; -} - -static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) -{ - return tt3650_ci_set_video_port(ca, slot, 0); -} - -static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) -{ - return tt3650_ci_set_video_port(ca, slot, 1); -} - -static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) -{ - struct dvb_usb_device *d = ca->data; - struct ttusb2_state *state = d->priv; - u8 buf[1]; - int ret; - - ci_dbg("%d", slot); - - if (slot) - return -EINVAL; - - buf[0] = 0; - - mutex_lock(&state->ca_mutex); - - ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); - if (ret) - goto failed; - - msleep(500); - - buf[0] = 1; - - ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); - if (ret) - goto failed; - - msleep(500); - - buf[0] = 0; /* FTA */ - - ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); - - msleep(1100); - - failed: - mutex_unlock(&state->ca_mutex); - - return ret; -} - -static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) -{ - u8 buf[1]; - int ret; - - if (slot) - return -EINVAL; - - ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1); - if (ret) - return ret; - - if (1 == buf[0]) { - return DVB_CA_EN50221_POLL_CAM_PRESENT | - DVB_CA_EN50221_POLL_CAM_READY; - } - return 0; -} - -static void tt3650_ci_uninit(struct dvb_usb_device *d) -{ - struct ttusb2_state *state; - - ci_dbg(""); - - if (NULL == d) - return; - - state = d->priv; - if (NULL == state) - return; - - if (NULL == state->ca.data) - return; - - dvb_ca_en50221_release(&state->ca); - - memset(&state->ca, 0, sizeof(state->ca)); -} - -static int tt3650_ci_init(struct dvb_usb_adapter *a) -{ - struct dvb_usb_device *d = a->dev; - struct ttusb2_state *state = d->priv; - int ret; - - ci_dbg(""); - - mutex_init(&state->ca_mutex); - - state->ca.owner = THIS_MODULE; - state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem; - state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem; - state->ca.read_cam_control = tt3650_ci_read_cam_control; - state->ca.write_cam_control = tt3650_ci_write_cam_control; - state->ca.slot_reset = tt3650_ci_slot_reset; - state->ca.slot_shutdown = tt3650_ci_slot_shutdown; - state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable; - state->ca.poll_slot_status = tt3650_ci_poll_slot_status; - state->ca.data = d; - - ret = dvb_ca_en50221_init(&a->dvb_adap, - &state->ca, - /* flags */ 0, - /* n_slots */ 1); - if (ret) { - err("Cannot initialize CI: Error %d.", ret); - memset(&state->ca, 0, sizeof(state->ca)); - return ret; - } - - info("CI initialized."); - - return 0; -} - -static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) -{ - struct dvb_usb_device *d = i2c_get_adapdata(adap); - static u8 obuf[60], ibuf[60]; - int i, write_read, read; - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) - return -EAGAIN; - - if (num > 2) - warn("more than 2 i2c messages at a time is not handled yet. TODO."); - - for (i = 0; i < num; i++) { - write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD); - read = msg[i].flags & I2C_M_RD; - - obuf[0] = (msg[i].addr << 1) | (write_read | read); - if (read) - obuf[1] = 0; - else - obuf[1] = msg[i].len; - - /* read request */ - if (write_read) - obuf[2] = msg[i+1].len; - else if (read) - obuf[2] = msg[i].len; - else - obuf[2] = 0; - - memcpy(&obuf[3], msg[i].buf, msg[i].len); - - if (ttusb2_msg(d, CMD_I2C_XFER, obuf, obuf[1]+3, ibuf, obuf[2] + 3) < 0) { - err("i2c transfer failed."); - break; - } - - if (write_read) { - memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len); - i++; - } else if (read) - memcpy(msg[i].buf, &ibuf[3], msg[i].len); - } - - mutex_unlock(&d->i2c_mutex); - return i; -} - -static u32 ttusb2_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm ttusb2_i2c_algo = { - .master_xfer = ttusb2_i2c_xfer, - .functionality = ttusb2_i2c_func, -}; - -/* command to poll IR receiver (copied from pctv452e.c) */ -#define CMD_GET_IR_CODE 0x1b - -/* IR */ -static int tt3650_rc_query(struct dvb_usb_device *d) -{ - int ret; - u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */ - struct ttusb2_state *st = d->priv; - ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx)); - if (ret != 0) - return ret; - - if (rx[8] & 0x01) { - /* got a "press" event */ - st->last_rc_key = (rx[3] << 8) | rx[2]; - deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]); - rc_keydown(d->rc_dev, st->last_rc_key, 0); - } else if (st->last_rc_key) { - rc_keyup(d->rc_dev); - st->last_rc_key = 0; - } - - return 0; -} - - -/* Callbacks for DVB USB */ -static int ttusb2_identify_state (struct usb_device *udev, struct - dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; - return 0; -} - -static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 b = onoff; - ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0); - return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0); -} - - -static struct tda10086_config tda10086_config = { - .demod_address = 0x0e, - .invert = 0, - .diseqc_tone = 1, - .xtal_freq = TDA10086_XTAL_16M, -}; - -static struct tda10023_config tda10023_config = { - .demod_address = 0x0c, - .invert = 0, - .xtal = 16000000, - .pll_m = 11, - .pll_p = 3, - .pll_n = 1, - .deltaf = 0xa511, -}; - -static struct tda10048_config tda10048_config = { - .demod_address = 0x10 >> 1, - .output_mode = TDA10048_PARALLEL_OUTPUT, - .inversion = TDA10048_INVERSION_ON, - .dtv6_if_freq_khz = TDA10048_IF_4000, - .dtv7_if_freq_khz = TDA10048_IF_4500, - .dtv8_if_freq_khz = TDA10048_IF_5000, - .clk_freq_khz = TDA10048_CLK_16000, - .no_firmware = 1, - .set_pll = true , - .pll_m = 5, - .pll_n = 3, - .pll_p = 0, -}; - -static struct tda827x_config tda827x_config = { - .config = 0, -}; - -static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev,0,3) < 0) - err("set interface to alts=3 failed"); - - if ((adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) { - deb_info("TDA10086 attach failed\n"); - return -ENODEV; - } - - return 0; -} - -static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - struct dvb_usb_adapter *adap = fe->dvb->priv; - - return adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, enable); -} - -static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap) -{ - if (usb_set_interface(adap->dev->udev, 0, 3) < 0) - err("set interface to alts=3 failed"); - - if (adap->fe_adap[0].fe == NULL) { - /* FE 0 DVB-C */ - adap->fe_adap[0].fe = dvb_attach(tda10023_attach, - &tda10023_config, &adap->dev->i2c_adap, 0x48); - - if (adap->fe_adap[0].fe == NULL) { - deb_info("TDA10023 attach failed\n"); - return -ENODEV; - } - tt3650_ci_init(adap); - } else { - adap->fe_adap[1].fe = dvb_attach(tda10048_attach, - &tda10048_config, &adap->dev->i2c_adap); - - if (adap->fe_adap[1].fe == NULL) { - deb_info("TDA10048 attach failed\n"); - return -ENODEV; - } - - /* tuner is behind TDA10023 I2C-gate */ - adap->fe_adap[1].fe->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl; - - } - - return 0; -} - -static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_frontend *fe; - - /* MFE: select correct FE to attach tuner since that's called twice */ - if (adap->fe_adap[1].fe == NULL) - fe = adap->fe_adap[0].fe; - else - fe = adap->fe_adap[1].fe; - - /* attach tuner */ - if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) { - printk(KERN_ERR "%s: No tda827x found!\n", __func__); - return -ENODEV; - } - return 0; -} - -static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap) -{ - if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) { - deb_info("TDA8263 attach failed\n"); - return -ENODEV; - } - - if (dvb_attach(lnbp21_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, 0, 0) == NULL) { - deb_info("LNBP21 attach failed\n"); - return -ENODEV; - } - return 0; -} - -/* DVB USB Driver stuff */ -static struct dvb_usb_device_properties ttusb2_properties; -static struct dvb_usb_device_properties ttusb2_properties_s2400; -static struct dvb_usb_device_properties ttusb2_properties_ct3650; - -static void ttusb2_usb_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - - tt3650_ci_uninit(d); - dvb_usb_device_exit(intf); -} - -static int ttusb2_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - if (0 == dvb_usb_device_init(intf, &ttusb2_properties, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400, - THIS_MODULE, NULL, adapter_nr) || - 0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650, - THIS_MODULE, NULL, adapter_nr)) - return 0; - return -ENODEV; -} - -static struct usb_device_id ttusb2_table [] = { - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) }, - { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) }, - { USB_DEVICE(USB_VID_TECHNOTREND, - USB_PID_TECHNOTREND_CONNECT_S2400) }, - { USB_DEVICE(USB_VID_TECHNOTREND, - USB_PID_TECHNOTREND_CONNECT_CT3650) }, - {} /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, ttusb2_table); - -static struct dvb_usb_device_properties ttusb2_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-pctv-400e-01.fw", - - .size_of_priv = sizeof(struct ttusb2_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = NULL, // ttusb2_streaming_ctrl, - - .frontend_attach = ttusb2_frontend_tda10086_attach, - .tuner_attach = ttusb2_tuner_tda826x_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1, - } - } - } - }}, - } - }, - - .power_ctrl = ttusb2_power_ctrl, - .identify_state = ttusb2_identify_state, - - .i2c_algo = &ttusb2_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 2, - .devices = { - { "Pinnacle 400e DVB-S USB2.0", - { &ttusb2_table[0], NULL }, - { NULL }, - }, - { "Pinnacle 450e DVB-S USB2.0", - { &ttusb2_table[1], NULL }, - { NULL }, - }, - } -}; - -static struct dvb_usb_device_properties ttusb2_properties_s2400 = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-tt-s2400-01.fw", - - .size_of_priv = sizeof(struct ttusb2_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = NULL, - - .frontend_attach = ttusb2_frontend_tda10086_attach, - .tuner_attach = ttusb2_tuner_tda826x_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1, - } - } - } - }}, - } - }, - - .power_ctrl = ttusb2_power_ctrl, - .identify_state = ttusb2_identify_state, - - .i2c_algo = &ttusb2_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Technotrend TT-connect S-2400", - { &ttusb2_table[2], NULL }, - { NULL }, - }, - } -}; - -static struct dvb_usb_device_properties ttusb2_properties_ct3650 = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct ttusb2_state), - - .rc.core = { - .rc_interval = 150, /* Less than IR_KEYPRESS_TIMEOUT */ - .rc_codes = RC_MAP_TT_1500, - .rc_query = tt3650_rc_query, - .allowed_protos = RC_TYPE_UNKNOWN, - }, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 2, - .fe = {{ - .streaming_ctrl = NULL, - - .frontend_attach = ttusb2_frontend_tda10023_attach, - .tuner_attach = ttusb2_tuner_tda827x_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1, - } - } - } - }, { - .streaming_ctrl = NULL, - - .frontend_attach = ttusb2_frontend_tda10023_attach, - .tuner_attach = ttusb2_tuner_tda827x_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_ISOC, - .count = 5, - .endpoint = 0x02, - .u = { - .isoc = { - .framesperurb = 4, - .framesize = 940, - .interval = 1, - } - } - } - }}, - }, - }, - - .power_ctrl = ttusb2_power_ctrl, - .identify_state = ttusb2_identify_state, - - .i2c_algo = &ttusb2_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Technotrend TT-connect CT-3650", - .warm_ids = { &ttusb2_table[3], NULL }, - }, - } -}; - -static struct usb_driver ttusb2_driver = { - .name = "dvb_usb_ttusb2", - .probe = ttusb2_probe, - .disconnect = ttusb2_usb_disconnect, - .id_table = ttusb2_table, -}; - -module_usb_driver(ttusb2_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/ttusb2.h b/drivers/media/dvb/dvb-usb/ttusb2.h deleted file mode 100644 index 52a63af40896..000000000000 --- a/drivers/media/dvb/dvb-usb/ttusb2.h +++ /dev/null @@ -1,70 +0,0 @@ -/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones - * (e.g. Pinnacle 400e DVB-S USB2.0). - * - * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> - * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> - * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_TTUSB2_H_ -#define _DVB_USB_TTUSB2_H_ - -/* TTUSB protocol - * - * always to messages (out/in) - * out message: - * 0xaa <id> <cmdbyte> <datalen> <data...> - * - * in message (complete block is always 0x40 bytes long) - * 0x55 <id> <cmdbyte> <datalen> <data...> - * - * id is incremented for each transaction - */ - -#define CMD_DSP_DOWNLOAD 0x13 -/* out data: <byte>[28] - * last block must be empty */ - -#define CMD_DSP_BOOT 0x14 -/* out data: nothing */ - -#define CMD_POWER 0x15 -/* out data: <on=1/off=0> */ - -#define CMD_LNB 0x16 -/* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */ - -#define CMD_GET_VERSION 0x17 -/* in data: <version_byte>[5] */ - -#define CMD_DISEQC 0x18 -/* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */ - -#define CMD_PID_ENABLE 0x22 -/* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */ - -#define CMD_PID_DISABLE 0x23 -/* out data: <index> */ - -#define CMD_FILTER_ENABLE 0x24 -/* out data: <index> <pid_idx> <filter>[12] <mask>[12] */ - -#define CMD_FILTER_DISABLE 0x25 -/* out data: <index> */ - -#define CMD_GET_DSP_VERSION 0x26 -/* in data: <version_byte>[28] */ - -#define CMD_I2C_XFER 0x31 -/* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen] - * in data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */ - -#define CMD_I2C_BITRATE 0x32 -/* out data: <default=0> */ - -#endif diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c deleted file mode 100644 index 9b042292e788..000000000000 --- a/drivers/media/dvb/dvb-usb/umt-010.c +++ /dev/null @@ -1,151 +0,0 @@ -/* DVB USB framework compliant Linux driver for the HanfTek UMT-010 USB2.0 - * DVB-T receiver. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "dibusb.h" - -#include "mt352.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -static int umt_mt352_demod_init(struct dvb_frontend *fe) -{ - static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; - static u8 mt352_reset[] = { 0x50, 0x80 }; - static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; - static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 }; - - static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff }; - static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff }; - static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 }; - static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 }; - static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f }; - - static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; - static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 }; - - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - udelay(2000); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); - mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); - - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - - mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1)); - mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2)); - mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3)); - mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4)); - mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5)); - - mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); - mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); - - return 0; -} - -static int umt_mt352_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct mt352_config umt_config; - - memset(&umt_config,0,sizeof(struct mt352_config)); - umt_config.demod_init = umt_mt352_demod_init; - umt_config.demod_address = 0xf; - - adap->fe_adap[0].fe = dvb_attach(mt352_attach, &umt_config, &adap->dev->i2c_adap); - - return 0; -} - -static int umt_tuner_attach (struct dvb_usb_adapter *adap) -{ - dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_TUA6034); - return 0; -} - -/* USB Driver stuff */ -static struct dvb_usb_device_properties umt_properties; - -static int umt_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - if (0 == dvb_usb_device_init(intf, &umt_properties, - THIS_MODULE, NULL, adapter_nr)) - return 0; - return -EINVAL; -} - -/* do not change the order of the ID table */ -static struct usb_device_id umt_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) }, -/* 01 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE (usb, umt_table); - -static struct dvb_usb_device_properties umt_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-umt-010-02.fw", - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = dibusb2_0_streaming_ctrl, - .frontend_attach = umt_mt352_frontend_attach, - .tuner_attach = umt_tuner_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = MAX_NO_URBS_FOR_DATA_STREAM, - .endpoint = 0x06, - .u = { - .bulk = { - .buffersize = 512, - } - } - }, - }}, - .size_of_priv = sizeof(struct dibusb_state), - } - }, - .power_ctrl = dibusb_power_ctrl, - - .i2c_algo = &dibusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .num_device_descs = 1, - .devices = { - { "Hanftek UMT-010 DVB-T USB2.0", - { &umt_table[0], NULL }, - { &umt_table[1], NULL }, - }, - } -}; - -static struct usb_driver umt_driver = { - .name = "dvb_usb_umt_010", - .probe = umt_probe, - .disconnect = dvb_usb_device_exit, - .id_table = umt_table, -}; - -module_usb_driver(umt_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for HanfTek UMT 010 USB2.0 DVB-T device"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c deleted file mode 100644 index d62ee0f5a165..000000000000 --- a/drivers/media/dvb/dvb-usb/usb-urb.c +++ /dev/null @@ -1,254 +0,0 @@ -/* usb-urb.c is part of the DVB USB library. - * - * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) - * see dvb-usb-init.c for copyright information. - * - * This file keeps functions for initializing and handling the - * BULK and ISOC USB data transfers in a generic way. - * Can be used for DVB-only and also, that's the plan, for - * Hybrid USB devices (analog and DVB). - */ -#include "dvb-usb-common.h" - -/* URB stuff for streaming */ -static void usb_urb_complete(struct urb *urb) -{ - struct usb_data_stream *stream = urb->context; - int ptype = usb_pipetype(urb->pipe); - int i; - u8 *b; - - deb_uxfer("'%s' urb completed. status: %d, length: %d/%d, pack_num: %d, errors: %d\n", - ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk", - urb->status,urb->actual_length,urb->transfer_buffer_length, - urb->number_of_packets,urb->error_count); - - switch (urb->status) { - case 0: /* success */ - case -ETIMEDOUT: /* NAK */ - break; - case -ECONNRESET: /* kill */ - case -ENOENT: - case -ESHUTDOWN: - return; - default: /* error */ - deb_ts("urb completition error %d.\n", urb->status); - break; - } - - b = (u8 *) urb->transfer_buffer; - switch (ptype) { - case PIPE_ISOCHRONOUS: - for (i = 0; i < urb->number_of_packets; i++) { - - if (urb->iso_frame_desc[i].status != 0) - deb_ts("iso frame descriptor has an error: %d\n",urb->iso_frame_desc[i].status); - else if (urb->iso_frame_desc[i].actual_length > 0) - stream->complete(stream, b + urb->iso_frame_desc[i].offset, urb->iso_frame_desc[i].actual_length); - - urb->iso_frame_desc[i].status = 0; - urb->iso_frame_desc[i].actual_length = 0; - } - debug_dump(b,20,deb_uxfer); - break; - case PIPE_BULK: - if (urb->actual_length > 0) - stream->complete(stream, b, urb->actual_length); - break; - default: - err("unknown endpoint type in completition handler."); - return; - } - usb_submit_urb(urb,GFP_ATOMIC); -} - -int usb_urb_kill(struct usb_data_stream *stream) -{ - int i; - for (i = 0; i < stream->urbs_submitted; i++) { - deb_ts("killing URB no. %d.\n",i); - - /* stop the URB */ - usb_kill_urb(stream->urb_list[i]); - } - stream->urbs_submitted = 0; - return 0; -} - -int usb_urb_submit(struct usb_data_stream *stream) -{ - int i,ret; - for (i = 0; i < stream->urbs_initialized; i++) { - deb_ts("submitting URB no. %d\n",i); - if ((ret = usb_submit_urb(stream->urb_list[i],GFP_ATOMIC))) { - err("could not submit URB no. %d - get them all back",i); - usb_urb_kill(stream); - return ret; - } - stream->urbs_submitted++; - } - return 0; -} - -static int usb_free_stream_buffers(struct usb_data_stream *stream) -{ - if (stream->state & USB_STATE_URB_BUF) { - while (stream->buf_num) { - stream->buf_num--; - deb_mem("freeing buffer %d\n",stream->buf_num); - usb_free_coherent(stream->udev, stream->buf_size, - stream->buf_list[stream->buf_num], - stream->dma_addr[stream->buf_num]); - } - } - - stream->state &= ~USB_STATE_URB_BUF; - - return 0; -} - -static int usb_allocate_stream_buffers(struct usb_data_stream *stream, int num, unsigned long size) -{ - stream->buf_num = 0; - stream->buf_size = size; - - deb_mem("all in all I will use %lu bytes for streaming\n",num*size); - - for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) { - deb_mem("allocating buffer %d\n",stream->buf_num); - if (( stream->buf_list[stream->buf_num] = - usb_alloc_coherent(stream->udev, size, GFP_ATOMIC, - &stream->dma_addr[stream->buf_num]) ) == NULL) { - deb_mem("not enough memory for urb-buffer allocation.\n"); - usb_free_stream_buffers(stream); - return -ENOMEM; - } - deb_mem("buffer %d: %p (dma: %Lu)\n", - stream->buf_num, -stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num]); - memset(stream->buf_list[stream->buf_num],0,size); - stream->state |= USB_STATE_URB_BUF; - } - deb_mem("allocation successful\n"); - - return 0; -} - -static int usb_bulk_urb_init(struct usb_data_stream *stream) -{ - int i, j; - - if ((i = usb_allocate_stream_buffers(stream,stream->props.count, - stream->props.u.bulk.buffersize)) < 0) - return i; - - /* allocate the URBs */ - for (i = 0; i < stream->props.count; i++) { - stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); - if (!stream->urb_list[i]) { - deb_mem("not enough memory for urb_alloc_urb!.\n"); - for (j = 0; j < i; j++) - usb_free_urb(stream->urb_list[j]); - return -ENOMEM; - } - usb_fill_bulk_urb( stream->urb_list[i], stream->udev, - usb_rcvbulkpipe(stream->udev,stream->props.endpoint), - stream->buf_list[i], - stream->props.u.bulk.buffersize, - usb_urb_complete, stream); - - stream->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP; - stream->urb_list[i]->transfer_dma = stream->dma_addr[i]; - stream->urbs_initialized++; - } - return 0; -} - -static int usb_isoc_urb_init(struct usb_data_stream *stream) -{ - int i,j; - - if ((i = usb_allocate_stream_buffers(stream,stream->props.count, - stream->props.u.isoc.framesize*stream->props.u.isoc.framesperurb)) < 0) - return i; - - /* allocate the URBs */ - for (i = 0; i < stream->props.count; i++) { - struct urb *urb; - int frame_offset = 0; - - stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC); - if (!stream->urb_list[i]) { - deb_mem("not enough memory for urb_alloc_urb!\n"); - for (j = 0; j < i; j++) - usb_free_urb(stream->urb_list[j]); - return -ENOMEM; - } - - urb = stream->urb_list[i]; - - urb->dev = stream->udev; - urb->context = stream; - urb->complete = usb_urb_complete; - urb->pipe = usb_rcvisocpipe(stream->udev,stream->props.endpoint); - urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; - urb->interval = stream->props.u.isoc.interval; - urb->number_of_packets = stream->props.u.isoc.framesperurb; - urb->transfer_buffer_length = stream->buf_size; - urb->transfer_buffer = stream->buf_list[i]; - urb->transfer_dma = stream->dma_addr[i]; - - for (j = 0; j < stream->props.u.isoc.framesperurb; j++) { - urb->iso_frame_desc[j].offset = frame_offset; - urb->iso_frame_desc[j].length = stream->props.u.isoc.framesize; - frame_offset += stream->props.u.isoc.framesize; - } - - stream->urbs_initialized++; - } - return 0; -} - -int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properties *props) -{ - if (stream == NULL || props == NULL) - return -EINVAL; - - memcpy(&stream->props, props, sizeof(*props)); - - usb_clear_halt(stream->udev,usb_rcvbulkpipe(stream->udev,stream->props.endpoint)); - - if (stream->complete == NULL) { - err("there is no data callback - this doesn't make sense."); - return -EINVAL; - } - - switch (stream->props.type) { - case USB_BULK: - return usb_bulk_urb_init(stream); - case USB_ISOC: - return usb_isoc_urb_init(stream); - default: - err("unknown URB-type for data transfer."); - return -EINVAL; - } -} - -int usb_urb_exit(struct usb_data_stream *stream) -{ - int i; - - usb_urb_kill(stream); - - for (i = 0; i < stream->urbs_initialized; i++) { - if (stream->urb_list[i] != NULL) { - deb_mem("freeing URB no. %d.\n",i); - /* free the URBs */ - usb_free_urb(stream->urb_list[i]); - } - } - stream->urbs_initialized = 0; - - usb_free_stream_buffers(stream); - return 0; -} diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/dvb/dvb-usb/vp702x-fe.c deleted file mode 100644 index 5eab468dd904..000000000000 --- a/drivers/media/dvb/dvb-usb/vp702x-fe.c +++ /dev/null @@ -1,379 +0,0 @@ -/* DVB frontend part of the Linux driver for the TwinhanDTV StarBox USB2.0 - * DVB-S receiver. - * - * Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de> - * Metzler Brothers Systementwicklung GbR - * - * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> - * - * Thanks to Twinhan who kindly provided hardware and information. - * - * This file can be removed soon, after the DST-driver is rewritten to provice - * the frontend-controlling separately. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - * - */ -#include "vp702x.h" - -struct vp702x_fe_state { - struct dvb_frontend fe; - struct dvb_usb_device *d; - - struct dvb_frontend_ops ops; - - fe_sec_voltage_t voltage; - fe_sec_tone_mode_t tone_mode; - - u8 lnb_buf[8]; - - u8 lock; - u8 sig; - u8 snr; - - unsigned long next_status_check; - unsigned long status_check_interval; -}; - -static int vp702x_fe_refresh_state(struct vp702x_fe_state *st) -{ - struct vp702x_device_state *dst = st->d->priv; - u8 *buf; - - if (time_after(jiffies, st->next_status_check)) { - mutex_lock(&dst->buf_mutex); - buf = dst->buf; - - vp702x_usb_in_op(st->d, READ_STATUS, 0, 0, buf, 10); - st->lock = buf[4]; - - vp702x_usb_in_op(st->d, READ_TUNER_REG_REQ, 0x11, 0, buf, 1); - st->snr = buf[0]; - - vp702x_usb_in_op(st->d, READ_TUNER_REG_REQ, 0x15, 0, buf, 1); - st->sig = buf[0]; - - mutex_unlock(&dst->buf_mutex); - st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; - } - return 0; -} - -static u8 vp702x_chksum(u8 *buf,int f, int count) -{ - u8 s = 0; - int i; - for (i = f; i < f+count; i++) - s += buf[i]; - return ~s+1; -} - -static int vp702x_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - vp702x_fe_refresh_state(st); - deb_fe("%s\n",__func__); - - if (st->lock == 0) - *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; - else - *status = 0; - - if (*status & FE_HAS_LOCK) - st->status_check_interval = 1000; - else - st->status_check_interval = 250; - return 0; -} - -/* not supported by this Frontend */ -static int vp702x_fe_read_ber(struct dvb_frontend* fe, u32 *ber) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - vp702x_fe_refresh_state(st); - *ber = 0; - return 0; -} - -/* not supported by this Frontend */ -static int vp702x_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - vp702x_fe_refresh_state(st); - *unc = 0; - return 0; -} - -static int vp702x_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - vp702x_fe_refresh_state(st); - - *strength = (st->sig << 8) | st->sig; - return 0; -} - -static int vp702x_fe_read_snr(struct dvb_frontend* fe, u16 *snr) -{ - u8 _snr; - struct vp702x_fe_state *st = fe->demodulator_priv; - vp702x_fe_refresh_state(st); - - _snr = (st->snr & 0x1f) * 0xff / 0x1f; - *snr = (_snr << 8) | _snr; - return 0; -} - -static int vp702x_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) -{ - deb_fe("%s\n",__func__); - tune->min_delay_ms = 2000; - return 0; -} - -static int vp702x_fe_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct vp702x_fe_state *st = fe->demodulator_priv; - struct vp702x_device_state *dst = st->d->priv; - u32 freq = fep->frequency/1000; - /*CalFrequency*/ -/* u16 frequencyRef[16] = { 2, 4, 8, 16, 32, 64, 128, 256, 24, 5, 10, 20, 40, 80, 160, 320 }; */ - u64 sr; - u8 *cmd; - - mutex_lock(&dst->buf_mutex); - - cmd = dst->buf; - memset(cmd, 0, 10); - - cmd[0] = (freq >> 8) & 0x7f; - cmd[1] = freq & 0xff; - cmd[2] = 1; /* divrate == 4 -> frequencyRef[1] -> 1 here */ - - sr = (u64) (fep->symbol_rate/1000) << 20; - do_div(sr,88000); - cmd[3] = (sr >> 12) & 0xff; - cmd[4] = (sr >> 4) & 0xff; - cmd[5] = (sr << 4) & 0xf0; - - deb_fe("setting frontend to: %u -> %u (%x) LNB-based GHz, symbolrate: %d -> %lu (%lx)\n", - fep->frequency, freq, freq, fep->symbol_rate, - (unsigned long) sr, (unsigned long) sr); - -/* if (fep->inversion == INVERSION_ON) - cmd[6] |= 0x80; */ - - if (st->voltage == SEC_VOLTAGE_18) - cmd[6] |= 0x40; - -/* if (fep->symbol_rate > 8000000) - cmd[6] |= 0x20; - - if (fep->frequency < 1531000) - cmd[6] |= 0x04; - - if (st->tone_mode == SEC_TONE_ON) - cmd[6] |= 0x01;*/ - - cmd[7] = vp702x_chksum(cmd,0,7); - - st->status_check_interval = 250; - st->next_status_check = jiffies; - - vp702x_usb_inout_op(st->d, cmd, 8, cmd, 10, 100); - - if (cmd[2] == 0 && cmd[3] == 0) - deb_fe("tuning failed.\n"); - else - deb_fe("tuning succeeded.\n"); - - mutex_unlock(&dst->buf_mutex); - - return 0; -} - -static int vp702x_fe_init(struct dvb_frontend *fe) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__func__); - vp702x_usb_in_op(st->d, RESET_TUNER, 0, 0, NULL, 0); - return 0; -} - -static int vp702x_fe_sleep(struct dvb_frontend *fe) -{ - deb_fe("%s\n",__func__); - return 0; -} - -static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, - struct dvb_diseqc_master_cmd *m) -{ - u8 *cmd; - struct vp702x_fe_state *st = fe->demodulator_priv; - struct vp702x_device_state *dst = st->d->priv; - - deb_fe("%s\n",__func__); - - if (m->msg_len > 4) - return -EINVAL; - - mutex_lock(&dst->buf_mutex); - - cmd = dst->buf; - cmd[1] = SET_DISEQC_CMD; - cmd[2] = m->msg_len; - memcpy(&cmd[3], m->msg, m->msg_len); - cmd[7] = vp702x_chksum(cmd, 0, 7); - - vp702x_usb_inout_op(st->d, cmd, 8, cmd, 10, 100); - - if (cmd[2] == 0 && cmd[3] == 0) - deb_fe("diseqc cmd failed.\n"); - else - deb_fe("diseqc cmd succeeded.\n"); - - mutex_unlock(&dst->buf_mutex); - - return 0; -} - -static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) -{ - deb_fe("%s\n",__func__); - return 0; -} - -static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - struct vp702x_device_state *dst = st->d->priv; - u8 *buf; - - deb_fe("%s\n",__func__); - - st->tone_mode = tone; - - if (tone == SEC_TONE_ON) - st->lnb_buf[2] = 0x02; - else - st->lnb_buf[2] = 0x00; - - st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7); - - mutex_lock(&dst->buf_mutex); - - buf = dst->buf; - memcpy(buf, st->lnb_buf, 8); - - vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100); - if (buf[2] == 0 && buf[3] == 0) - deb_fe("set_tone cmd failed.\n"); - else - deb_fe("set_tone cmd succeeded.\n"); - - mutex_unlock(&dst->buf_mutex); - - return 0; -} - -static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t - voltage) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - struct vp702x_device_state *dst = st->d->priv; - u8 *buf; - deb_fe("%s\n",__func__); - - st->voltage = voltage; - - if (voltage != SEC_VOLTAGE_OFF) - st->lnb_buf[4] = 0x01; - else - st->lnb_buf[4] = 0x00; - - st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7); - - mutex_lock(&dst->buf_mutex); - - buf = dst->buf; - memcpy(buf, st->lnb_buf, 8); - - vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100); - if (buf[2] == 0 && buf[3] == 0) - deb_fe("set_voltage cmd failed.\n"); - else - deb_fe("set_voltage cmd succeeded.\n"); - - mutex_unlock(&dst->buf_mutex); - return 0; -} - -static void vp702x_fe_release(struct dvb_frontend* fe) -{ - struct vp702x_fe_state *st = fe->demodulator_priv; - kfree(st); -} - -static struct dvb_frontend_ops vp702x_fe_ops; - -struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d) -{ - struct vp702x_fe_state *s = kzalloc(sizeof(struct vp702x_fe_state), GFP_KERNEL); - if (s == NULL) - goto error; - - s->d = d; - - memcpy(&s->fe.ops,&vp702x_fe_ops,sizeof(struct dvb_frontend_ops)); - s->fe.demodulator_priv = s; - - s->lnb_buf[1] = SET_LNB_POWER; - s->lnb_buf[3] = 0xff; /* 0=tone burst, 2=data burst, ff=off */ - - return &s->fe; -error: - return NULL; -} - - -static struct dvb_frontend_ops vp702x_fe_ops = { - .delsys = { SYS_DVBS }, - .info = { - .name = "Twinhan DST-like frontend (VP7021/VP7020) DVB-S", - .frequency_min = 950000, - .frequency_max = 2150000, - .frequency_stepsize = 1000, /* kHz for QPSK frontends */ - .frequency_tolerance = 0, - .symbol_rate_min = 1000000, - .symbol_rate_max = 45000000, - .symbol_rate_tolerance = 500, /* ppm */ - .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | - FE_CAN_QPSK | - FE_CAN_FEC_AUTO - }, - .release = vp702x_fe_release, - - .init = vp702x_fe_init, - .sleep = vp702x_fe_sleep, - - .set_frontend = vp702x_fe_set_frontend, - .get_tune_settings = vp702x_fe_get_tune_settings, - - .read_status = vp702x_fe_read_status, - .read_ber = vp702x_fe_read_ber, - .read_signal_strength = vp702x_fe_read_signal_strength, - .read_snr = vp702x_fe_read_snr, - .read_ucblocks = vp702x_fe_read_unc_blocks, - - .diseqc_send_master_cmd = vp702x_fe_send_diseqc_msg, - .diseqc_send_burst = vp702x_fe_send_diseqc_burst, - .set_tone = vp702x_fe_set_tone, - .set_voltage = vp702x_fe_set_voltage, -}; diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c deleted file mode 100644 index 07c673a6e764..000000000000 --- a/drivers/media/dvb/dvb-usb/vp702x.c +++ /dev/null @@ -1,444 +0,0 @@ -/* DVB USB compliant Linux driver for the TwinhanDTV StarBox USB2.0 DVB-S - * receiver. - * - * Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de> - * Metzler Brothers Systementwicklung GbR - * - * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> - * - * Thanks to Twinhan who kindly provided hardware and information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "vp702x.h" -#include <linux/mutex.h> - -/* debug */ -int dvb_usb_vp702x_debug; -module_param_named(debug,dvb_usb_vp702x_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct vp702x_adapter_state { - int pid_filter_count; - int pid_filter_can_bypass; - u8 pid_filter_state; -}; - -static int vp702x_usb_in_op_unlocked(struct dvb_usb_device *d, u8 req, - u16 value, u16 index, u8 *b, int blen) -{ - int ret; - - ret = usb_control_msg(d->udev, - usb_rcvctrlpipe(d->udev, 0), - req, - USB_TYPE_VENDOR | USB_DIR_IN, - value, index, b, blen, - 2000); - - if (ret < 0) { - warn("usb in operation failed. (%d)", ret); - ret = -EIO; - } else - ret = 0; - - - deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index); - debug_dump(b,blen,deb_xfer); - - return ret; -} - -int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - int ret; - - mutex_lock(&d->usb_mutex); - ret = vp702x_usb_in_op_unlocked(d, req, value, index, b, blen); - mutex_unlock(&d->usb_mutex); - - return ret; -} - -int vp702x_usb_out_op_unlocked(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - int ret; - deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index); - debug_dump(b,blen,deb_xfer); - - if ((ret = usb_control_msg(d->udev, - usb_sndctrlpipe(d->udev,0), - req, - USB_TYPE_VENDOR | USB_DIR_OUT, - value,index,b,blen, - 2000)) != blen) { - warn("usb out operation failed. (%d)",ret); - return -EIO; - } else - return 0; -} - -int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen) -{ - int ret; - - mutex_lock(&d->usb_mutex); - ret = vp702x_usb_out_op_unlocked(d, req, value, index, b, blen); - mutex_unlock(&d->usb_mutex); - - return ret; -} - -int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec) -{ - int ret; - - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) - return ret; - - ret = vp702x_usb_out_op_unlocked(d, REQUEST_OUT, 0, 0, o, olen); - msleep(msec); - ret = vp702x_usb_in_op_unlocked(d, REQUEST_IN, 0, 0, i, ilen); - - mutex_unlock(&d->usb_mutex); - return ret; -} - -static int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, - int olen, u8 *i, int ilen, int msec) -{ - struct vp702x_device_state *st = d->priv; - int ret = 0; - u8 *buf; - int buflen = max(olen + 2, ilen + 1); - - ret = mutex_lock_interruptible(&st->buf_mutex); - if (ret < 0) - return ret; - - if (buflen > st->buf_len) { - buf = kmalloc(buflen, GFP_KERNEL); - if (!buf) { - mutex_unlock(&st->buf_mutex); - return -ENOMEM; - } - info("successfully reallocated a bigger buffer"); - kfree(st->buf); - st->buf = buf; - st->buf_len = buflen; - } else { - buf = st->buf; - } - - buf[0] = 0x00; - buf[1] = cmd; - memcpy(&buf[2], o, olen); - - ret = vp702x_usb_inout_op(d, buf, olen+2, buf, ilen+1, msec); - - if (ret == 0) - memcpy(i, &buf[1], ilen); - mutex_unlock(&st->buf_mutex); - - return ret; -} - -static int vp702x_set_pld_mode(struct dvb_usb_adapter *adap, u8 bypass) -{ - int ret; - struct vp702x_device_state *st = adap->dev->priv; - u8 *buf; - - mutex_lock(&st->buf_mutex); - - buf = st->buf; - memset(buf, 0, 16); - - ret = vp702x_usb_in_op(adap->dev, 0xe0, (bypass << 8) | 0x0e, - 0, buf, 16); - mutex_unlock(&st->buf_mutex); - return ret; -} - -static int vp702x_set_pld_state(struct dvb_usb_adapter *adap, u8 state) -{ - int ret; - struct vp702x_device_state *st = adap->dev->priv; - u8 *buf; - - mutex_lock(&st->buf_mutex); - - buf = st->buf; - memset(buf, 0, 16); - ret = vp702x_usb_in_op(adap->dev, 0xe0, (state << 8) | 0x0f, - 0, buf, 16); - - mutex_unlock(&st->buf_mutex); - - return ret; -} - -static int vp702x_set_pid(struct dvb_usb_adapter *adap, u16 pid, u8 id, int onoff) -{ - struct vp702x_adapter_state *st = adap->priv; - struct vp702x_device_state *dst = adap->dev->priv; - u8 *buf; - - if (onoff) - st->pid_filter_state |= (1 << id); - else { - st->pid_filter_state &= ~(1 << id); - pid = 0xffff; - } - - id = 0x10 + id*2; - - vp702x_set_pld_state(adap, st->pid_filter_state); - - mutex_lock(&dst->buf_mutex); - - buf = dst->buf; - memset(buf, 0, 16); - vp702x_usb_in_op(adap->dev, 0xe0, (((pid >> 8) & 0xff) << 8) | (id), 0, buf, 16); - vp702x_usb_in_op(adap->dev, 0xe0, (((pid ) & 0xff) << 8) | (id+1), 0, buf, 16); - - mutex_unlock(&dst->buf_mutex); - - return 0; -} - - -static int vp702x_init_pid_filter(struct dvb_usb_adapter *adap) -{ - struct vp702x_adapter_state *st = adap->priv; - struct vp702x_device_state *dst = adap->dev->priv; - int i; - u8 *b; - - st->pid_filter_count = 8; - st->pid_filter_can_bypass = 1; - st->pid_filter_state = 0x00; - - vp702x_set_pld_mode(adap, 1); /* bypass */ - - for (i = 0; i < st->pid_filter_count; i++) - vp702x_set_pid(adap, 0xffff, i, 1); - - mutex_lock(&dst->buf_mutex); - b = dst->buf; - memset(b, 0, 10); - vp702x_usb_in_op(adap->dev, 0xb5, 3, 0, b, 10); - vp702x_usb_in_op(adap->dev, 0xb5, 0, 0, b, 10); - vp702x_usb_in_op(adap->dev, 0xb5, 1, 0, b, 10); - mutex_unlock(&dst->buf_mutex); - /*vp702x_set_pld_mode(d, 0); // filter */ - - return 0; -} - -static int vp702x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - return 0; -} - -/* keys for the enclosed remote control */ -static struct rc_map_table rc_map_vp702x_table[] = { - { 0x0001, KEY_1 }, - { 0x0002, KEY_2 }, -}; - -/* remote control stuff (does not work with my box) */ -static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - u8 *key; - int i; - -/* remove the following return to enabled remote querying */ - return 0; - - key = kmalloc(10, GFP_KERNEL); - if (!key) - return -ENOMEM; - - vp702x_usb_in_op(d,READ_REMOTE_REQ,0,0,key,10); - - deb_rc("remote query key: %x %d\n",key[1],key[1]); - - if (key[1] == 0x44) { - *state = REMOTE_NO_KEY_PRESSED; - kfree(key); - return 0; - } - - for (i = 0; i < ARRAY_SIZE(rc_map_vp702x_table); i++) - if (rc5_custom(&rc_map_vp702x_table[i]) == key[1]) { - *state = REMOTE_KEY_PRESSED; - *event = rc_map_vp702x_table[i].keycode; - break; - } - kfree(key); - return 0; -} - - -static int vp702x_read_mac_addr(struct dvb_usb_device *d,u8 mac[6]) -{ - u8 i, *buf; - struct vp702x_device_state *st = d->priv; - - mutex_lock(&st->buf_mutex); - buf = st->buf; - for (i = 6; i < 12; i++) - vp702x_usb_in_op(d, READ_EEPROM_REQ, i, 1, &buf[i - 6], 1); - - memcpy(mac, buf, 6); - mutex_unlock(&st->buf_mutex); - return 0; -} - -static int vp702x_frontend_attach(struct dvb_usb_adapter *adap) -{ - u8 buf[10] = { 0 }; - - vp702x_usb_out_op(adap->dev, SET_TUNER_POWER_REQ, 0, 7, NULL, 0); - - if (vp702x_usb_inout_cmd(adap->dev, GET_SYSTEM_STRING, NULL, 0, - buf, 10, 10)) - return -EIO; - - buf[9] = '\0'; - info("system string: %s",&buf[1]); - - vp702x_init_pid_filter(adap); - - adap->fe_adap[0].fe = vp702x_fe_attach(adap->dev); - vp702x_usb_out_op(adap->dev, SET_TUNER_POWER_REQ, 1, 7, NULL, 0); - - return 0; -} - -static struct dvb_usb_device_properties vp702x_properties; - -static int vp702x_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct dvb_usb_device *d; - struct vp702x_device_state *st; - int ret; - - ret = dvb_usb_device_init(intf, &vp702x_properties, - THIS_MODULE, &d, adapter_nr); - if (ret) - goto out; - - st = d->priv; - st->buf_len = 16; - st->buf = kmalloc(st->buf_len, GFP_KERNEL); - if (!st->buf) { - ret = -ENOMEM; - dvb_usb_device_exit(intf); - goto out; - } - mutex_init(&st->buf_mutex); - -out: - return ret; - -} - -static void vp702x_usb_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - struct vp702x_device_state *st = d->priv; - mutex_lock(&st->buf_mutex); - kfree(st->buf); - mutex_unlock(&st->buf_mutex); - dvb_usb_device_exit(intf); -} - -static struct usb_device_id vp702x_usb_table [] = { - { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7021_COLD) }, -// { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7020_COLD) }, -// { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7020_WARM) }, - { 0 }, -}; -MODULE_DEVICE_TABLE(usb, vp702x_usb_table); - -static struct dvb_usb_device_properties vp702x_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-vp702x-02.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct vp702x_device_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .caps = DVB_USB_ADAP_RECEIVES_204_BYTE_TS, - - .streaming_ctrl = vp702x_streaming_ctrl, - .frontend_attach = vp702x_frontend_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 10, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - .size_of_priv = sizeof(struct vp702x_adapter_state), - } - }, - .read_mac_address = vp702x_read_mac_addr, - - .rc.legacy = { - .rc_map_table = rc_map_vp702x_table, - .rc_map_size = ARRAY_SIZE(rc_map_vp702x_table), - .rc_interval = 400, - .rc_query = vp702x_rc_query, - }, - - .num_device_descs = 1, - .devices = { - { .name = "TwinhanDTV StarBox DVB-S USB2.0 (VP7021)", - .cold_ids = { &vp702x_usb_table[0], NULL }, - .warm_ids = { NULL }, - }, -/* { .name = "TwinhanDTV StarBox DVB-S USB2.0 (VP7020)", - .cold_ids = { &vp702x_usb_table[2], NULL }, - .warm_ids = { &vp702x_usb_table[3], NULL }, - }, -*/ { NULL }, - } -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver vp702x_usb_driver = { - .name = "dvb_usb_vp702x", - .probe = vp702x_usb_probe, - .disconnect = vp702x_usb_disconnect, - .id_table = vp702x_usb_table, -}; - -module_usb_driver(vp702x_usb_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for Twinhan StarBox DVB-S USB2.0 and clones"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/dvb/dvb-usb/vp702x.h deleted file mode 100644 index 20b90055e7ac..000000000000 --- a/drivers/media/dvb/dvb-usb/vp702x.h +++ /dev/null @@ -1,113 +0,0 @@ -#ifndef _DVB_USB_VP7021_H_ -#define _DVB_USB_VP7021_H_ - -#define DVB_USB_LOG_PREFIX "vp702x" -#include "dvb-usb.h" - -extern int dvb_usb_vp702x_debug; -#define deb_info(args...) dprintk(dvb_usb_vp702x_debug,0x01,args) -#define deb_xfer(args...) dprintk(dvb_usb_vp702x_debug,0x02,args) -#define deb_rc(args...) dprintk(dvb_usb_vp702x_debug,0x04,args) -#define deb_fe(args...) dprintk(dvb_usb_vp702x_debug,0x08,args) - -/* commands are read and written with USB control messages */ - -/* consecutive read/write operation */ -#define REQUEST_OUT 0xB2 -#define REQUEST_IN 0xB3 - -/* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0 - * request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer - * the returning buffer looks as follows - * request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */ - -#define GET_TUNER_STATUS 0x05 -/* additional in buffer: - * 0 1 2 3 4 5 6 7 8 - * N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */ - -#define GET_SYSTEM_STRING 0x06 -/* additional in buffer: - * 0 1 2 3 4 5 6 7 8 - * N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */ - -#define SET_DISEQC_CMD 0x08 -/* additional out buffer: - * 0 1 2 3 4 - * len X1 X2 X3 X4 - * additional in buffer: - * 0 1 2 - * N/A 0 0 b[1] == b[2] == 0 -> success, failure otherwise */ - -#define SET_LNB_POWER 0x09 -/* additional out buffer: - * 0 1 2 - * 0x00 0xff 1 = on, 0 = off - * additional in buffer: - * 0 1 2 - * N/A 0 0 b[1] == b[2] == 0 -> success failure otherwise */ - -#define GET_MAC_ADDRESS 0x0A -/* #define GET_MAC_ADDRESS 0x0B */ -/* additional in buffer: - * 0 1 2 3 4 5 6 7 8 - * N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */ - -#define SET_PID_FILTER 0x11 -/* additional in buffer: - * 0 1 ... 14 15 16 - * PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */ - -/* request: 0xB2; i: 0; v: 0; - * b[0] != 0 -> tune and lock a channel - * 0 1 2 3 4 5 6 7 - * freq0 freq1 divstep srate0 srate1 srate2 flag chksum - */ - -/* one direction requests */ -#define READ_REMOTE_REQ 0xB4 -/* IN i: 0; v: 0; b[0] == request, b[1] == key */ - -#define READ_PID_NUMBER_REQ 0xB5 -/* IN i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */ - -#define WRITE_EEPROM_REQ 0xB6 -/* OUT i: offset; v: value to write; no extra buffer */ - -#define READ_EEPROM_REQ 0xB7 -/* IN i: bufferlen; v: offset; buffer with bufferlen bytes */ - -#define READ_STATUS 0xB8 -/* IN i: 0; v: 0; bufferlen 10 */ - -#define READ_TUNER_REG_REQ 0xB9 -/* IN i: 0; v: register; b[0] = value */ - -#define READ_FX2_REG_REQ 0xBA -/* IN i: offset; v: 0; b[0] = value */ - -#define WRITE_FX2_REG_REQ 0xBB -/* OUT i: offset; v: value to write; 1 byte extra buffer */ - -#define SET_TUNER_POWER_REQ 0xBC -/* IN i: 0 = power off, 1 = power on */ - -#define WRITE_TUNER_REG_REQ 0xBD -/* IN i: register, v: value to write, no extra buffer */ - -#define RESET_TUNER 0xBE -/* IN i: 0, v: 0, no extra buffer */ - -struct vp702x_device_state { - struct mutex buf_mutex; - int buf_len; - u8 *buf; -}; - - -extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d); - -extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec); -extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); - -#endif diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c deleted file mode 100644 index b8825b18c003..000000000000 --- a/drivers/media/dvb/dvb-usb/vp7045-fe.c +++ /dev/null @@ -1,190 +0,0 @@ -/* DVB frontend part of the Linux driver for TwinhanDTV Alpha/MagicBoxII USB2.0 - * DVB-T receiver. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * Thanks to Twinhan who kindly provided hardware and information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - * - */ -#include "vp7045.h" - -/* It is a Zarlink MT352 within a Samsung Tuner (DNOS404ZH102A) - 040929 - AAT - * - * Programming is hidden inside the firmware, so set_frontend is very easy. - * Even though there is a Firmware command that one can use to access the demod - * via its registers. This is used for status information. - */ - -struct vp7045_fe_state { - struct dvb_frontend fe; - struct dvb_usb_device *d; -}; - -static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) -{ - struct vp7045_fe_state *state = fe->demodulator_priv; - u8 s0 = vp7045_read_reg(state->d,0x00), - s1 = vp7045_read_reg(state->d,0x01), - s3 = vp7045_read_reg(state->d,0x03); - - *status = 0; - if (s0 & (1 << 4)) - *status |= FE_HAS_CARRIER; - if (s0 & (1 << 1)) - *status |= FE_HAS_VITERBI; - if (s0 & (1 << 5)) - *status |= FE_HAS_LOCK; - if (s1 & (1 << 1)) - *status |= FE_HAS_SYNC; - if (s3 & (1 << 6)) - *status |= FE_HAS_SIGNAL; - - if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != - (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) - *status &= ~FE_HAS_LOCK; - - return 0; -} - -static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber) -{ - struct vp7045_fe_state *state = fe->demodulator_priv; - *ber = (vp7045_read_reg(state->d, 0x0D) << 16) | - (vp7045_read_reg(state->d, 0x0E) << 8) | - vp7045_read_reg(state->d, 0x0F); - return 0; -} - -static int vp7045_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) -{ - struct vp7045_fe_state *state = fe->demodulator_priv; - *unc = (vp7045_read_reg(state->d, 0x10) << 8) | - vp7045_read_reg(state->d, 0x11); - return 0; -} - -static int vp7045_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) -{ - struct vp7045_fe_state *state = fe->demodulator_priv; - u16 signal = (vp7045_read_reg(state->d, 0x14) << 8) | - vp7045_read_reg(state->d, 0x15); - - *strength = ~signal; - return 0; -} - -static int vp7045_fe_read_snr(struct dvb_frontend* fe, u16 *snr) -{ - struct vp7045_fe_state *state = fe->demodulator_priv; - u8 _snr = vp7045_read_reg(state->d, 0x09); - *snr = (_snr << 8) | _snr; - return 0; -} - -static int vp7045_fe_init(struct dvb_frontend* fe) -{ - return 0; -} - -static int vp7045_fe_sleep(struct dvb_frontend* fe) -{ - return 0; -} - -static int vp7045_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) -{ - tune->min_delay_ms = 800; - return 0; -} - -static int vp7045_fe_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct vp7045_fe_state *state = fe->demodulator_priv; - u8 buf[5]; - u32 freq = fep->frequency / 1000; - - buf[0] = (freq >> 16) & 0xff; - buf[1] = (freq >> 8) & 0xff; - buf[2] = freq & 0xff; - buf[3] = 0; - - switch (fep->bandwidth_hz) { - case 8000000: - buf[4] = 8; - break; - case 7000000: - buf[4] = 7; - break; - case 6000000: - buf[4] = 6; - break; - default: - return -EINVAL; - } - - vp7045_usb_op(state->d,LOCK_TUNER_COMMAND,buf,5,NULL,0,200); - return 0; -} - -static void vp7045_fe_release(struct dvb_frontend* fe) -{ - struct vp7045_fe_state *state = fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops vp7045_fe_ops; - -struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d) -{ - struct vp7045_fe_state *s = kzalloc(sizeof(struct vp7045_fe_state), GFP_KERNEL); - if (s == NULL) - goto error; - - s->d = d; - memcpy(&s->fe.ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops)); - s->fe.demodulator_priv = s; - - return &s->fe; -error: - return NULL; -} - - -static struct dvb_frontend_ops vp7045_fe_ops = { - .delsys = { SYS_DVBT }, - .info = { - .name = "Twinhan VP7045/46 USB DVB-T", - .frequency_min = 44250000, - .frequency_max = 867250000, - .frequency_stepsize = 1000, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_RECOVER | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = vp7045_fe_release, - - .init = vp7045_fe_init, - .sleep = vp7045_fe_sleep, - - .set_frontend = vp7045_fe_set_frontend, - .get_tune_settings = vp7045_fe_get_tune_settings, - - .read_status = vp7045_fe_read_status, - .read_ber = vp7045_fe_read_ber, - .read_signal_strength = vp7045_fe_read_signal_strength, - .read_snr = vp7045_fe_read_snr, - .read_ucblocks = vp7045_fe_read_unc_blocks, -}; diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c deleted file mode 100644 index d750724132ee..000000000000 --- a/drivers/media/dvb/dvb-usb/vp7045.c +++ /dev/null @@ -1,302 +0,0 @@ -/* DVB USB compliant Linux driver for the - * - TwinhanDTV Alpha/MagicBoxII USB2.0 DVB-T receiver - * - DigitalNow TinyUSB2 DVB-t receiver - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * Thanks to Twinhan who kindly provided hardware and information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "vp7045.h" - -/* debug */ -static int dvb_usb_vp7045_debug; -module_param_named(debug,dvb_usb_vp7045_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args) -#define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args) -#define deb_rc(args...) dprintk(dvb_usb_vp7045_debug,0x04,args) - -int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen, int msec) -{ - int ret = 0; - u8 *buf = d->priv; - - buf[0] = cmd; - - if (outlen > 19) - outlen = 19; - - if (inlen > 11) - inlen = 11; - - ret = mutex_lock_interruptible(&d->usb_mutex); - if (ret) - return ret; - - if (out != NULL && outlen > 0) - memcpy(&buf[1], out, outlen); - - deb_xfer("out buffer: "); - debug_dump(buf, outlen+1, deb_xfer); - - - if (usb_control_msg(d->udev, - usb_sndctrlpipe(d->udev,0), - TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, - buf, 20, 2000) != 20) { - err("USB control message 'out' went wrong."); - ret = -EIO; - goto unlock; - } - - msleep(msec); - - if (usb_control_msg(d->udev, - usb_rcvctrlpipe(d->udev,0), - TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, - buf, 12, 2000) != 12) { - err("USB control message 'in' went wrong."); - ret = -EIO; - goto unlock; - } - - deb_xfer("in buffer: "); - debug_dump(buf, 12, deb_xfer); - - if (in != NULL && inlen > 0) - memcpy(in, &buf[1], inlen); - -unlock: - mutex_unlock(&d->usb_mutex); - - return ret; -} - -u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg) -{ - u8 obuf[2] = { 0 },v; - obuf[1] = reg; - - vp7045_usb_op(d,TUNER_REG_READ,obuf,2,&v,1,30); - - return v; -} - -static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff) -{ - u8 v = onoff; - return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150); -} - -/* remote control stuff */ - -/* The keymapping struct. Somehow this should be loaded to the driver, but - * currently it is hardcoded. */ -static struct rc_map_table rc_map_vp7045_table[] = { - { 0x0016, KEY_POWER }, - { 0x0010, KEY_MUTE }, - { 0x0003, KEY_1 }, - { 0x0001, KEY_2 }, - { 0x0006, KEY_3 }, - { 0x0009, KEY_4 }, - { 0x001d, KEY_5 }, - { 0x001f, KEY_6 }, - { 0x000d, KEY_7 }, - { 0x0019, KEY_8 }, - { 0x001b, KEY_9 }, - { 0x0015, KEY_0 }, - { 0x0005, KEY_CHANNELUP }, - { 0x0002, KEY_CHANNELDOWN }, - { 0x001e, KEY_VOLUMEUP }, - { 0x000a, KEY_VOLUMEDOWN }, - { 0x0011, KEY_RECORD }, - { 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */ - { 0x0014, KEY_PLAY }, - { 0x001a, KEY_STOP }, - { 0x0040, KEY_REWIND }, - { 0x0012, KEY_FASTFORWARD }, - { 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */ - { 0x004c, KEY_PAUSE }, - { 0x004d, KEY_SCREEN }, /* Full screen mode. */ - { 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ - { 0x000c, KEY_CANCEL }, /* Cancel */ - { 0x001c, KEY_EPG }, /* EPG */ - { 0x0000, KEY_TAB }, /* Tab */ - { 0x0048, KEY_INFO }, /* Preview */ - { 0x0004, KEY_LIST }, /* RecordList */ - { 0x000f, KEY_TEXT }, /* Teletext */ - { 0x0041, KEY_PREVIOUSSONG }, - { 0x0042, KEY_NEXTSONG }, - { 0x004b, KEY_UP }, - { 0x0051, KEY_DOWN }, - { 0x004e, KEY_LEFT }, - { 0x0052, KEY_RIGHT }, - { 0x004f, KEY_ENTER }, - { 0x0013, KEY_CANCEL }, - { 0x004a, KEY_CLEAR }, - { 0x0054, KEY_PRINT }, /* Capture */ - { 0x0043, KEY_SUBTITLE }, /* Subtitle/CC */ - { 0x0008, KEY_VIDEO }, /* A/V */ - { 0x0007, KEY_SLEEP }, /* Hibernate */ - { 0x0045, KEY_ZOOM }, /* Zoom+ */ - { 0x0018, KEY_RED}, - { 0x0053, KEY_GREEN}, - { 0x005e, KEY_YELLOW}, - { 0x005f, KEY_BLUE} -}; - -static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state) -{ - u8 key; - int i; - vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20); - - deb_rc("remote query key: %x %d\n",key,key); - - if (key == 0x44) { - *state = REMOTE_NO_KEY_PRESSED; - return 0; - } - - for (i = 0; i < ARRAY_SIZE(rc_map_vp7045_table); i++) - if (rc5_data(&rc_map_vp7045_table[i]) == key) { - *state = REMOTE_KEY_PRESSED; - *event = rc_map_vp7045_table[i].keycode; - break; - } - return 0; -} - -static int vp7045_read_eeprom(struct dvb_usb_device *d,u8 *buf, int len, int offset) -{ - int i = 0; - u8 v,br[2]; - for (i=0; i < len; i++) { - v = offset + i; - vp7045_usb_op(d,GET_EE_VALUE,&v,1,br,2,5); - buf[i] = br[1]; - } - deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ",offset, i); - debug_dump(buf,i,deb_info); - return 0; -} - -static int vp7045_read_mac_addr(struct dvb_usb_device *d,u8 mac[6]) -{ - return vp7045_read_eeprom(d,mac, 6, MAC_0_ADDR); -} - -static int vp7045_frontend_attach(struct dvb_usb_adapter *adap) -{ - u8 buf[255] = { 0 }; - - vp7045_usb_op(adap->dev,VENDOR_STRING_READ,NULL,0,buf,20,0); - buf[10] = '\0'; - deb_info("firmware says: %s ",buf); - - vp7045_usb_op(adap->dev,PRODUCT_STRING_READ,NULL,0,buf,20,0); - buf[10] = '\0'; - deb_info("%s ",buf); - - vp7045_usb_op(adap->dev,FW_VERSION_READ,NULL,0,buf,20,0); - buf[10] = '\0'; - deb_info("v%s\n",buf); - -/* Dump the EEPROM */ -/* vp7045_read_eeprom(d,buf, 255, FX2_ID_ADDR); */ - - adap->fe_adap[0].fe = vp7045_fe_attach(adap->dev); - - return 0; -} - -static struct dvb_usb_device_properties vp7045_properties; - -static int vp7045_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - return dvb_usb_device_init(intf, &vp7045_properties, - THIS_MODULE, NULL, adapter_nr); -} - -static struct usb_device_id vp7045_usb_table [] = { - { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_COLD) }, - { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_WARM) }, - { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_COLD) }, - { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_WARM) }, - { 0 }, -}; -MODULE_DEVICE_TABLE(usb, vp7045_usb_table); - -static struct dvb_usb_device_properties vp7045_properties = { - .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-vp7045-01.fw", - .size_of_priv = 20, - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .frontend_attach = vp7045_frontend_attach, - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 7, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 4096, - } - } - }, - }}, - } - }, - .power_ctrl = vp7045_power_ctrl, - .read_mac_address = vp7045_read_mac_addr, - - .rc.legacy = { - .rc_interval = 400, - .rc_map_table = rc_map_vp7045_table, - .rc_map_size = ARRAY_SIZE(rc_map_vp7045_table), - .rc_query = vp7045_rc_query, - }, - - .num_device_descs = 2, - .devices = { - { .name = "Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)", - .cold_ids = { &vp7045_usb_table[0], NULL }, - .warm_ids = { &vp7045_usb_table[1], NULL }, - }, - { .name = "DigitalNow TinyUSB 2 DVB-t Receiver", - .cold_ids = { &vp7045_usb_table[2], NULL }, - .warm_ids = { &vp7045_usb_table[3], NULL }, - }, - { NULL }, - } -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver vp7045_usb_driver = { - .name = "dvb_usb_vp7045", - .probe = vp7045_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = vp7045_usb_table, -}; - -module_usb_driver(vp7045_usb_driver); - -MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for Twinhan MagicBox/Alpha and DNTV tinyUSB2 DVB-T USB2.0"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h deleted file mode 100644 index cf5ec46f8bb1..000000000000 --- a/drivers/media/dvb/dvb-usb/vp7045.h +++ /dev/null @@ -1,70 +0,0 @@ -/* Common header-file of the Linux driver for the TwinhanDTV Alpha/MagicBoxII - * USB2.0 DVB-T receiver. - * - * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) - * - * Thanks to Twinhan who kindly provided hardware and information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_VP7045_H_ -#define _DVB_USB_VP7045_H_ - -#define DVB_USB_LOG_PREFIX "vp7045" -#include "dvb-usb.h" - -/* vp7045 commands */ - -/* Twinhan Vendor requests */ -#define TH_COMMAND_IN 0xC0 -#define TH_COMMAND_OUT 0xC1 - -/* command bytes */ -#define TUNER_REG_READ 0x03 -#define TUNER_REG_WRITE 0x04 - -#define RC_VAL_READ 0x05 - #define RC_NO_KEY 0x44 - -#define SET_TUNER_POWER 0x06 -#define CHECK_TUNER_POWER 0x12 - #define Tuner_Power_ON 1 - #define Tuner_Power_OFF 0 - -#define GET_USB_SPEED 0x07 - -#define LOCK_TUNER_COMMAND 0x09 - -#define TUNER_SIGNAL_READ 0x0A - -/* FX2 eeprom */ -#define SET_EE_VALUE 0x10 -#define GET_EE_VALUE 0x11 - #define FX2_ID_ADDR 0x00 - #define VID_MSB_ADDR 0x02 - #define VID_LSB_ADDR 0x01 - #define PID_MSB_ADDR 0x04 - #define PID_LSB_ADDR 0x03 - #define MAC_0_ADDR 0x07 - #define MAC_1_ADDR 0x08 - #define MAC_2_ADDR 0x09 - #define MAC_3_ADDR 0x0a - #define MAC_4_ADDR 0x0b - #define MAC_5_ADDR 0x0c - -#define RESET_FX2 0x13 - -#define FW_VERSION_READ 0x0B -#define VENDOR_STRING_READ 0x0C -#define PRODUCT_STRING_READ 0x0D -#define FW_BCD_VERSION_READ 0x14 - -extern struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d); -extern int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen,int msec); -extern u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg); - -#endif diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig deleted file mode 100644 index bc6456eb2c4f..000000000000 --- a/drivers/media/dvb/siano/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -# -# Siano Mobile Silicon Digital TV device configuration -# - -config SMS_SIANO_MDTV - tristate "Siano SMS1xxx based MDTV receiver" - depends on DVB_CORE && RC_CORE && HAS_DMA - ---help--- - Choose Y or M here if you have MDTV receiver with a Siano chipset. - - To compile this driver as a module, choose M here - (The module will be called smsmdtv). - - Further documentation on this driver can be found on the WWW - at http://www.siano-ms.com/ - -if SMS_SIANO_MDTV -menu "Siano module components" - -# Hardware interfaces support - -config SMS_USB_DRV - tristate "USB interface support" - depends on DVB_CORE && USB - ---help--- - Choose if you would like to have Siano's support for USB interface - -config SMS_SDIO_DRV - tristate "SDIO interface support" - depends on DVB_CORE && MMC - ---help--- - Choose if you would like to have Siano's support for SDIO interface -endmenu -endif # SMS_SIANO_MDTV diff --git a/drivers/media/dvb/siano/Makefile b/drivers/media/dvb/siano/Makefile deleted file mode 100644 index 14756bdb6eaa..000000000000 --- a/drivers/media/dvb/siano/Makefile +++ /dev/null @@ -1,11 +0,0 @@ - -smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o - -obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o -obj-$(CONFIG_SMS_USB_DRV) += smsusb.o -obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o - -ccflags-y += -Idrivers/media/dvb-core - -ccflags-y += $(extra-cflags-y) $(extra-cflags-m) - diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c deleted file mode 100644 index 680c781c8dd6..000000000000 --- a/drivers/media/dvb/siano/sms-cards.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - * Card-specific functions for the Siano SMS1xxx USB dongle - * - * Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation; - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "sms-cards.h" -#include "smsir.h" -#include <linux/module.h> - -static int sms_dbg; -module_param_named(cards_dbg, sms_dbg, int, 0644); -MODULE_PARM_DESC(cards_dbg, "set debug level (info=1, adv=2 (or-able))"); - -static struct sms_board sms_boards[] = { - [SMS_BOARD_UNKNOWN] = { - .name = "Unknown board", - }, - [SMS1XXX_BOARD_SIANO_STELLAR] = { - .name = "Siano Stellar Digital Receiver", - .type = SMS_STELLAR, - }, - [SMS1XXX_BOARD_SIANO_NOVA_A] = { - .name = "Siano Nova A Digital Receiver", - .type = SMS_NOVA_A0, - }, - [SMS1XXX_BOARD_SIANO_NOVA_B] = { - .name = "Siano Nova B Digital Receiver", - .type = SMS_NOVA_B0, - }, - [SMS1XXX_BOARD_SIANO_VEGA] = { - .name = "Siano Vega Digital Receiver", - .type = SMS_VEGA, - }, - [SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT] = { - .name = "Hauppauge Catamount", - .type = SMS_STELLAR, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw", - }, - [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A] = { - .name = "Hauppauge Okemo-A", - .type = SMS_NOVA_A0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw", - }, - [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B] = { - .name = "Hauppauge Okemo-B", - .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw", - }, - [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = { - .name = "Hauppauge WinTV MiniStick", - .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw", - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", - .rc_codes = RC_MAP_HAUPPAUGE, - .board_cfg.leds_power = 26, - .board_cfg.led0 = 27, - .board_cfg.led1 = 28, - .board_cfg.ir = 9, - .led_power = 26, - .led_lo = 27, - .led_hi = 28, - }, - [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = { - .name = "Hauppauge WinTV MiniCard", - .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", - .lna_ctrl = 29, - .board_cfg.foreign_lna0_ctrl = 29, - .rf_switch = 17, - .board_cfg.rf_switch_uhf = 17, - }, - [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = { - .name = "Hauppauge WinTV MiniCard", - .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", - .lna_ctrl = -1, - }, - [SMS1XXX_BOARD_SIANO_NICE] = { - /* 11 */ - .name = "Siano Nice Digital Receiver", - .type = SMS_NOVA_B0, - }, - [SMS1XXX_BOARD_SIANO_VENICE] = { - /* 12 */ - .name = "Siano Venice Digital Receiver", - .type = SMS_VEGA, - }, -}; - -struct sms_board *sms_get_board(unsigned id) -{ - BUG_ON(id >= ARRAY_SIZE(sms_boards)); - - return &sms_boards[id]; -} -EXPORT_SYMBOL_GPL(sms_get_board); -static inline void sms_gpio_assign_11xx_default_led_config( - struct smscore_gpio_config *pGpioConfig) { - pGpioConfig->Direction = SMS_GPIO_DIRECTION_OUTPUT; - pGpioConfig->InputCharacteristics = - SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL; - pGpioConfig->OutputDriving = SMS_GPIO_OUTPUT_DRIVING_4mA; - pGpioConfig->OutputSlewRate = SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS; - pGpioConfig->PullUpDown = SMS_GPIO_PULL_UP_DOWN_NONE; -} - -int sms_board_event(struct smscore_device_t *coredev, - enum SMS_BOARD_EVENTS gevent) { - struct smscore_gpio_config MyGpioConfig; - - sms_gpio_assign_11xx_default_led_config(&MyGpioConfig); - - switch (gevent) { - case BOARD_EVENT_POWER_INIT: /* including hotplug */ - break; /* BOARD_EVENT_BIND */ - - case BOARD_EVENT_POWER_SUSPEND: - break; /* BOARD_EVENT_POWER_SUSPEND */ - - case BOARD_EVENT_POWER_RESUME: - break; /* BOARD_EVENT_POWER_RESUME */ - - case BOARD_EVENT_BIND: - break; /* BOARD_EVENT_BIND */ - - case BOARD_EVENT_SCAN_PROG: - break; /* BOARD_EVENT_SCAN_PROG */ - case BOARD_EVENT_SCAN_COMP: - break; /* BOARD_EVENT_SCAN_COMP */ - case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL: - break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */ - case BOARD_EVENT_FE_LOCK: - break; /* BOARD_EVENT_FE_LOCK */ - case BOARD_EVENT_FE_UNLOCK: - break; /* BOARD_EVENT_FE_UNLOCK */ - case BOARD_EVENT_DEMOD_LOCK: - break; /* BOARD_EVENT_DEMOD_LOCK */ - case BOARD_EVENT_DEMOD_UNLOCK: - break; /* BOARD_EVENT_DEMOD_UNLOCK */ - case BOARD_EVENT_RECEPTION_MAX_4: - break; /* BOARD_EVENT_RECEPTION_MAX_4 */ - case BOARD_EVENT_RECEPTION_3: - break; /* BOARD_EVENT_RECEPTION_3 */ - case BOARD_EVENT_RECEPTION_2: - break; /* BOARD_EVENT_RECEPTION_2 */ - case BOARD_EVENT_RECEPTION_1: - break; /* BOARD_EVENT_RECEPTION_1 */ - case BOARD_EVENT_RECEPTION_LOST_0: - break; /* BOARD_EVENT_RECEPTION_LOST_0 */ - case BOARD_EVENT_MULTIPLEX_OK: - break; /* BOARD_EVENT_MULTIPLEX_OK */ - case BOARD_EVENT_MULTIPLEX_ERRORS: - break; /* BOARD_EVENT_MULTIPLEX_ERRORS */ - - default: - sms_err("Unknown SMS board event"); - break; - } - return 0; -} -EXPORT_SYMBOL_GPL(sms_board_event); - -static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable) -{ - int lvl, ret; - u32 gpio; - struct smscore_config_gpio gpioconfig = { - .direction = SMS_GPIO_DIRECTION_OUTPUT, - .pullupdown = SMS_GPIO_PULLUPDOWN_NONE, - .inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL, - .outputslewrate = SMS_GPIO_OUTPUTSLEWRATE_FAST, - .outputdriving = SMS_GPIO_OUTPUTDRIVING_4mA, - }; - - if (pin == 0) - return -EINVAL; - - if (pin < 0) { - /* inverted gpio */ - gpio = pin * -1; - lvl = enable ? 0 : 1; - } else { - gpio = pin; - lvl = enable ? 1 : 0; - } - - ret = smscore_configure_gpio(coredev, gpio, &gpioconfig); - if (ret < 0) - return ret; - - return smscore_set_gpio(coredev, gpio, lvl); -} - -int sms_board_setup(struct smscore_device_t *coredev) -{ - int board_id = smscore_get_board_id(coredev); - struct sms_board *board = sms_get_board(board_id); - - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - /* turn off all LEDs */ - sms_set_gpio(coredev, board->led_power, 0); - sms_set_gpio(coredev, board->led_hi, 0); - sms_set_gpio(coredev, board->led_lo, 0); - break; - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - /* turn off LNA */ - sms_set_gpio(coredev, board->lna_ctrl, 0); - break; - } - return 0; -} -EXPORT_SYMBOL_GPL(sms_board_setup); - -int sms_board_power(struct smscore_device_t *coredev, int onoff) -{ - int board_id = smscore_get_board_id(coredev); - struct sms_board *board = sms_get_board(board_id); - - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - /* power LED */ - sms_set_gpio(coredev, - board->led_power, onoff ? 1 : 0); - break; - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - /* LNA */ - if (!onoff) - sms_set_gpio(coredev, board->lna_ctrl, 0); - break; - } - return 0; -} -EXPORT_SYMBOL_GPL(sms_board_power); - -int sms_board_led_feedback(struct smscore_device_t *coredev, int led) -{ - int board_id = smscore_get_board_id(coredev); - struct sms_board *board = sms_get_board(board_id); - - /* dont touch GPIO if LEDs are already set */ - if (smscore_led_state(coredev, -1) == led) - return 0; - - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - sms_set_gpio(coredev, - board->led_lo, (led & SMS_LED_LO) ? 1 : 0); - sms_set_gpio(coredev, - board->led_hi, (led & SMS_LED_HI) ? 1 : 0); - - smscore_led_state(coredev, led); - break; - } - return 0; -} -EXPORT_SYMBOL_GPL(sms_board_led_feedback); - -int sms_board_lna_control(struct smscore_device_t *coredev, int onoff) -{ - int board_id = smscore_get_board_id(coredev); - struct sms_board *board = sms_get_board(board_id); - - sms_debug("%s: LNA %s", __func__, onoff ? "enabled" : "disabled"); - - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - sms_set_gpio(coredev, - board->rf_switch, onoff ? 1 : 0); - return sms_set_gpio(coredev, - board->lna_ctrl, onoff ? 1 : 0); - } - return -EINVAL; -} -EXPORT_SYMBOL_GPL(sms_board_lna_control); - -int sms_board_load_modules(int id) -{ - switch (id) { - case SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT: - case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A: - case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B: - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - request_module("smsdvb"); - break; - default: - /* do nothing */ - break; - } - return 0; -} -EXPORT_SYMBOL_GPL(sms_board_load_modules); diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h deleted file mode 100644 index d8cdf756f7cf..000000000000 --- a/drivers/media/dvb/siano/sms-cards.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Card-specific functions for the Siano SMS1xxx USB dongle - * - * Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation; - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __SMS_CARDS_H__ -#define __SMS_CARDS_H__ - -#include <linux/usb.h> -#include "smscoreapi.h" -#include "smsir.h" - -#define SMS_BOARD_UNKNOWN 0 -#define SMS1XXX_BOARD_SIANO_STELLAR 1 -#define SMS1XXX_BOARD_SIANO_NOVA_A 2 -#define SMS1XXX_BOARD_SIANO_NOVA_B 3 -#define SMS1XXX_BOARD_SIANO_VEGA 4 -#define SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT 5 -#define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A 6 -#define SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B 7 -#define SMS1XXX_BOARD_HAUPPAUGE_WINDHAM 8 -#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9 -#define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10 -#define SMS1XXX_BOARD_SIANO_NICE 11 -#define SMS1XXX_BOARD_SIANO_VENICE 12 - -struct sms_board_gpio_cfg { - int lna_vhf_exist; - int lna_vhf_ctrl; - int lna_uhf_exist; - int lna_uhf_ctrl; - int lna_uhf_d_ctrl; - int lna_sband_exist; - int lna_sband_ctrl; - int lna_sband_d_ctrl; - int foreign_lna0_ctrl; - int foreign_lna1_ctrl; - int foreign_lna2_ctrl; - int rf_switch_vhf; - int rf_switch_uhf; - int rf_switch_sband; - int leds_power; - int led0; - int led1; - int led2; - int led3; - int led4; - int ir; - int eeprom_wp; - int mrc_sense; - int mrc_pdn_resetn; - int mrc_gp0; /* mrcs spi int */ - int mrc_gp1; - int mrc_gp2; - int mrc_gp3; - int mrc_gp4; - int host_spi_gsp_ts_int; -}; - -struct sms_board { - enum sms_device_type_st type; - char *name, *fw[DEVICE_MODE_MAX]; - struct sms_board_gpio_cfg board_cfg; - char *rc_codes; /* Name of IR codes table */ - - /* gpios */ - int led_power, led_hi, led_lo, lna_ctrl, rf_switch; -}; - -struct sms_board *sms_get_board(unsigned id); - -extern struct smscore_device_t *coredev; - -enum SMS_BOARD_EVENTS { - BOARD_EVENT_POWER_INIT, - BOARD_EVENT_POWER_SUSPEND, - BOARD_EVENT_POWER_RESUME, - BOARD_EVENT_BIND, - BOARD_EVENT_SCAN_PROG, - BOARD_EVENT_SCAN_COMP, - BOARD_EVENT_EMERGENCY_WARNING_SIGNAL, - BOARD_EVENT_FE_LOCK, - BOARD_EVENT_FE_UNLOCK, - BOARD_EVENT_DEMOD_LOCK, - BOARD_EVENT_DEMOD_UNLOCK, - BOARD_EVENT_RECEPTION_MAX_4, - BOARD_EVENT_RECEPTION_3, - BOARD_EVENT_RECEPTION_2, - BOARD_EVENT_RECEPTION_1, - BOARD_EVENT_RECEPTION_LOST_0, - BOARD_EVENT_MULTIPLEX_OK, - BOARD_EVENT_MULTIPLEX_ERRORS -}; - -int sms_board_event(struct smscore_device_t *coredev, - enum SMS_BOARD_EVENTS gevent); - -int sms_board_setup(struct smscore_device_t *coredev); - -#define SMS_LED_OFF 0 -#define SMS_LED_LO 1 -#define SMS_LED_HI 2 -int sms_board_led_feedback(struct smscore_device_t *coredev, int led); -int sms_board_power(struct smscore_device_t *coredev, int onoff); -int sms_board_lna_control(struct smscore_device_t *coredev, int onoff); - -extern int sms_board_load_modules(int id); - -#endif /* __SMS_CARDS_H__ */ diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c deleted file mode 100644 index 9cc55546cc30..000000000000 --- a/drivers/media/dvb/siano/smscoreapi.c +++ /dev/null @@ -1,1637 +0,0 @@ -/* - * Siano core API module - * - * This file contains implementation for the interface to sms core component - * - * author: Uri Shkolnik - * - * Copyright (c), 2005-2008 Siano Mobile Silicon, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation; - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. - * - * See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <linux/firmware.h> -#include <linux/wait.h> -#include <asm/byteorder.h> - -#include "smscoreapi.h" -#include "sms-cards.h" -#include "smsir.h" -#include "smsendian.h" - -static int sms_dbg; -module_param_named(debug, sms_dbg, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))"); - -struct smscore_device_notifyee_t { - struct list_head entry; - hotplug_t hotplug; -}; - -struct smscore_idlist_t { - struct list_head entry; - int id; - int data_type; -}; - -struct smscore_client_t { - struct list_head entry; - struct smscore_device_t *coredev; - void *context; - struct list_head idlist; - onresponse_t onresponse_handler; - onremove_t onremove_handler; -}; - -void smscore_set_board_id(struct smscore_device_t *core, int id) -{ - core->board_id = id; -} - -int smscore_led_state(struct smscore_device_t *core, int led) -{ - if (led >= 0) - core->led_state = led; - return core->led_state; -} -EXPORT_SYMBOL_GPL(smscore_set_board_id); - -int smscore_get_board_id(struct smscore_device_t *core) -{ - return core->board_id; -} -EXPORT_SYMBOL_GPL(smscore_get_board_id); - -struct smscore_registry_entry_t { - struct list_head entry; - char devpath[32]; - int mode; - enum sms_device_type_st type; -}; - -static struct list_head g_smscore_notifyees; -static struct list_head g_smscore_devices; -static struct mutex g_smscore_deviceslock; - -static struct list_head g_smscore_registry; -static struct mutex g_smscore_registrylock; - -static int default_mode = 4; - -module_param(default_mode, int, 0644); -MODULE_PARM_DESC(default_mode, "default firmware id (device mode)"); - -static struct smscore_registry_entry_t *smscore_find_registry(char *devpath) -{ - struct smscore_registry_entry_t *entry; - struct list_head *next; - - kmutex_lock(&g_smscore_registrylock); - for (next = g_smscore_registry.next; - next != &g_smscore_registry; - next = next->next) { - entry = (struct smscore_registry_entry_t *) next; - if (!strcmp(entry->devpath, devpath)) { - kmutex_unlock(&g_smscore_registrylock); - return entry; - } - } - entry = kmalloc(sizeof(struct smscore_registry_entry_t), GFP_KERNEL); - if (entry) { - entry->mode = default_mode; - strcpy(entry->devpath, devpath); - list_add(&entry->entry, &g_smscore_registry); - } else - sms_err("failed to create smscore_registry."); - kmutex_unlock(&g_smscore_registrylock); - return entry; -} - -int smscore_registry_getmode(char *devpath) -{ - struct smscore_registry_entry_t *entry; - - entry = smscore_find_registry(devpath); - if (entry) - return entry->mode; - else - sms_err("No registry found."); - - return default_mode; -} -EXPORT_SYMBOL_GPL(smscore_registry_getmode); - -static enum sms_device_type_st smscore_registry_gettype(char *devpath) -{ - struct smscore_registry_entry_t *entry; - - entry = smscore_find_registry(devpath); - if (entry) - return entry->type; - else - sms_err("No registry found."); - - return -1; -} - -void smscore_registry_setmode(char *devpath, int mode) -{ - struct smscore_registry_entry_t *entry; - - entry = smscore_find_registry(devpath); - if (entry) - entry->mode = mode; - else - sms_err("No registry found."); -} - -static void smscore_registry_settype(char *devpath, - enum sms_device_type_st type) -{ - struct smscore_registry_entry_t *entry; - - entry = smscore_find_registry(devpath); - if (entry) - entry->type = type; - else - sms_err("No registry found."); -} - - -static void list_add_locked(struct list_head *new, struct list_head *head, - spinlock_t *lock) -{ - unsigned long flags; - - spin_lock_irqsave(lock, flags); - - list_add(new, head); - - spin_unlock_irqrestore(lock, flags); -} - -/** - * register a client callback that called when device plugged in/unplugged - * NOTE: if devices exist callback is called immediately for each device - * - * @param hotplug callback - * - * @return 0 on success, <0 on error. - */ -int smscore_register_hotplug(hotplug_t hotplug) -{ - struct smscore_device_notifyee_t *notifyee; - struct list_head *next, *first; - int rc = 0; - - kmutex_lock(&g_smscore_deviceslock); - - notifyee = kmalloc(sizeof(struct smscore_device_notifyee_t), - GFP_KERNEL); - if (notifyee) { - /* now notify callback about existing devices */ - first = &g_smscore_devices; - for (next = first->next; - next != first && !rc; - next = next->next) { - struct smscore_device_t *coredev = - (struct smscore_device_t *) next; - rc = hotplug(coredev, coredev->device, 1); - } - - if (rc >= 0) { - notifyee->hotplug = hotplug; - list_add(¬ifyee->entry, &g_smscore_notifyees); - } else - kfree(notifyee); - } else - rc = -ENOMEM; - - kmutex_unlock(&g_smscore_deviceslock); - - return rc; -} -EXPORT_SYMBOL_GPL(smscore_register_hotplug); - -/** - * unregister a client callback that called when device plugged in/unplugged - * - * @param hotplug callback - * - */ -void smscore_unregister_hotplug(hotplug_t hotplug) -{ - struct list_head *next, *first; - - kmutex_lock(&g_smscore_deviceslock); - - first = &g_smscore_notifyees; - - for (next = first->next; next != first;) { - struct smscore_device_notifyee_t *notifyee = - (struct smscore_device_notifyee_t *) next; - next = next->next; - - if (notifyee->hotplug == hotplug) { - list_del(¬ifyee->entry); - kfree(notifyee); - } - } - - kmutex_unlock(&g_smscore_deviceslock); -} -EXPORT_SYMBOL_GPL(smscore_unregister_hotplug); - -static void smscore_notify_clients(struct smscore_device_t *coredev) -{ - struct smscore_client_t *client; - - /* the client must call smscore_unregister_client from remove handler */ - while (!list_empty(&coredev->clients)) { - client = (struct smscore_client_t *) coredev->clients.next; - client->onremove_handler(client->context); - } -} - -static int smscore_notify_callbacks(struct smscore_device_t *coredev, - struct device *device, int arrival) -{ - struct smscore_device_notifyee_t *elem; - int rc = 0; - - /* note: must be called under g_deviceslock */ - - list_for_each_entry(elem, &g_smscore_notifyees, entry) { - rc = elem->hotplug(coredev, device, arrival); - if (rc < 0) - break; - } - - return rc; -} - -static struct -smscore_buffer_t *smscore_createbuffer(u8 *buffer, void *common_buffer, - dma_addr_t common_buffer_phys) -{ - struct smscore_buffer_t *cb = - kmalloc(sizeof(struct smscore_buffer_t), GFP_KERNEL); - if (!cb) { - sms_info("kmalloc(...) failed"); - return NULL; - } - - cb->p = buffer; - cb->offset_in_common = buffer - (u8 *) common_buffer; - cb->phys = common_buffer_phys + cb->offset_in_common; - - return cb; -} - -/** - * creates coredev object for a device, prepares buffers, - * creates buffer mappings, notifies registered hotplugs about new device. - * - * @param params device pointer to struct with device specific parameters - * and handlers - * @param coredev pointer to a value that receives created coredev object - * - * @return 0 on success, <0 on error. - */ -int smscore_register_device(struct smsdevice_params_t *params, - struct smscore_device_t **coredev) -{ - struct smscore_device_t *dev; - u8 *buffer; - - dev = kzalloc(sizeof(struct smscore_device_t), GFP_KERNEL); - if (!dev) { - sms_info("kzalloc(...) failed"); - return -ENOMEM; - } - - /* init list entry so it could be safe in smscore_unregister_device */ - INIT_LIST_HEAD(&dev->entry); - - /* init queues */ - INIT_LIST_HEAD(&dev->clients); - INIT_LIST_HEAD(&dev->buffers); - - /* init locks */ - spin_lock_init(&dev->clientslock); - spin_lock_init(&dev->bufferslock); - - /* init completion events */ - init_completion(&dev->version_ex_done); - init_completion(&dev->data_download_done); - init_completion(&dev->trigger_done); - init_completion(&dev->init_device_done); - init_completion(&dev->reload_start_done); - init_completion(&dev->resume_done); - init_completion(&dev->gpio_configuration_done); - init_completion(&dev->gpio_set_level_done); - init_completion(&dev->gpio_get_level_done); - init_completion(&dev->ir_init_done); - - /* Buffer management */ - init_waitqueue_head(&dev->buffer_mng_waitq); - - /* alloc common buffer */ - dev->common_buffer_size = params->buffer_size * params->num_buffers; - dev->common_buffer = dma_alloc_coherent(NULL, dev->common_buffer_size, - &dev->common_buffer_phys, - GFP_KERNEL | GFP_DMA); - if (!dev->common_buffer) { - smscore_unregister_device(dev); - return -ENOMEM; - } - - /* prepare dma buffers */ - for (buffer = dev->common_buffer; - dev->num_buffers < params->num_buffers; - dev->num_buffers++, buffer += params->buffer_size) { - struct smscore_buffer_t *cb = - smscore_createbuffer(buffer, dev->common_buffer, - dev->common_buffer_phys); - if (!cb) { - smscore_unregister_device(dev); - return -ENOMEM; - } - - smscore_putbuffer(dev, cb); - } - - sms_info("allocated %d buffers", dev->num_buffers); - - dev->mode = DEVICE_MODE_NONE; - dev->context = params->context; - dev->device = params->device; - dev->setmode_handler = params->setmode_handler; - dev->detectmode_handler = params->detectmode_handler; - dev->sendrequest_handler = params->sendrequest_handler; - dev->preload_handler = params->preload_handler; - dev->postload_handler = params->postload_handler; - - dev->device_flags = params->flags; - strcpy(dev->devpath, params->devpath); - - smscore_registry_settype(dev->devpath, params->device_type); - - /* add device to devices list */ - kmutex_lock(&g_smscore_deviceslock); - list_add(&dev->entry, &g_smscore_devices); - kmutex_unlock(&g_smscore_deviceslock); - - *coredev = dev; - - sms_info("device %p created", dev); - - return 0; -} -EXPORT_SYMBOL_GPL(smscore_register_device); - - -static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev, - void *buffer, size_t size, struct completion *completion) { - int rc = coredev->sendrequest_handler(coredev->context, buffer, size); - if (rc < 0) { - sms_info("sendrequest returned error %d", rc); - return rc; - } - - return wait_for_completion_timeout(completion, - msecs_to_jiffies(SMS_PROTOCOL_MAX_RAOUNDTRIP_MS)) ? - 0 : -ETIME; -} - -/** - * Starts & enables IR operations - * - * @return 0 on success, < 0 on error. - */ -static int smscore_init_ir(struct smscore_device_t *coredev) -{ - int ir_io; - int rc; - void *buffer; - - coredev->ir.dev = NULL; - ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir; - if (ir_io) {/* only if IR port exist we use IR sub-module */ - sms_info("IR loading"); - rc = sms_ir_init(coredev); - - if (rc != 0) - sms_err("Error initialization DTV IR sub-module"); - else { - buffer = kmalloc(sizeof(struct SmsMsgData_ST2) + - SMS_DMA_ALIGNMENT, - GFP_KERNEL | GFP_DMA); - if (buffer) { - struct SmsMsgData_ST2 *msg = - (struct SmsMsgData_ST2 *) - SMS_ALIGN_ADDRESS(buffer); - - SMS_INIT_MSG(&msg->xMsgHeader, - MSG_SMS_START_IR_REQ, - sizeof(struct SmsMsgData_ST2)); - msg->msgData[0] = coredev->ir.controller; - msg->msgData[1] = coredev->ir.timeout; - - smsendian_handle_tx_message( - (struct SmsMsgHdr_ST2 *)msg); - rc = smscore_sendrequest_and_wait(coredev, msg, - msg->xMsgHeader. msgLength, - &coredev->ir_init_done); - - kfree(buffer); - } else - sms_err - ("Sending IR initialization message failed"); - } - } else - sms_info("IR port has not been detected"); - - return 0; -} - -/** - * sets initial device mode and notifies client hotplugs that device is ready - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * - * @return 0 on success, <0 on error. - */ -int smscore_start_device(struct smscore_device_t *coredev) -{ - int rc = smscore_set_device_mode( - coredev, smscore_registry_getmode(coredev->devpath)); - if (rc < 0) { - sms_info("set device mode faile , rc %d", rc); - return rc; - } - - kmutex_lock(&g_smscore_deviceslock); - - rc = smscore_notify_callbacks(coredev, coredev->device, 1); - smscore_init_ir(coredev); - - sms_info("device %p started, rc %d", coredev, rc); - - kmutex_unlock(&g_smscore_deviceslock); - - return rc; -} -EXPORT_SYMBOL_GPL(smscore_start_device); - - -static int smscore_load_firmware_family2(struct smscore_device_t *coredev, - void *buffer, size_t size) -{ - struct SmsFirmware_ST *firmware = (struct SmsFirmware_ST *) buffer; - struct SmsMsgHdr_ST *msg; - u32 mem_address; - u8 *payload = firmware->Payload; - int rc = 0; - firmware->StartAddress = le32_to_cpu(firmware->StartAddress); - firmware->Length = le32_to_cpu(firmware->Length); - - mem_address = firmware->StartAddress; - - sms_info("loading FW to addr 0x%x size %d", - mem_address, firmware->Length); - if (coredev->preload_handler) { - rc = coredev->preload_handler(coredev->context); - if (rc < 0) - return rc; - } - - /* PAGE_SIZE buffer shall be enough and dma aligned */ - msg = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); - if (!msg) - return -ENOMEM; - - if (coredev->mode != DEVICE_MODE_NONE) { - sms_debug("sending reload command."); - SMS_INIT_MSG(msg, MSG_SW_RELOAD_START_REQ, - sizeof(struct SmsMsgHdr_ST)); - rc = smscore_sendrequest_and_wait(coredev, msg, - msg->msgLength, - &coredev->reload_start_done); - mem_address = *(u32 *) &payload[20]; - } - - while (size && rc >= 0) { - struct SmsDataDownload_ST *DataMsg = - (struct SmsDataDownload_ST *) msg; - int payload_size = min((int) size, SMS_MAX_PAYLOAD_SIZE); - - SMS_INIT_MSG(msg, MSG_SMS_DATA_DOWNLOAD_REQ, - (u16)(sizeof(struct SmsMsgHdr_ST) + - sizeof(u32) + payload_size)); - - DataMsg->MemAddr = mem_address; - memcpy(DataMsg->Payload, payload, payload_size); - - if ((coredev->device_flags & SMS_ROM_NO_RESPONSE) && - (coredev->mode == DEVICE_MODE_NONE)) - rc = coredev->sendrequest_handler( - coredev->context, DataMsg, - DataMsg->xMsgHeader.msgLength); - else - rc = smscore_sendrequest_and_wait( - coredev, DataMsg, - DataMsg->xMsgHeader.msgLength, - &coredev->data_download_done); - - payload += payload_size; - size -= payload_size; - mem_address += payload_size; - } - - if (rc >= 0) { - if (coredev->mode == DEVICE_MODE_NONE) { - struct SmsMsgData_ST *TriggerMsg = - (struct SmsMsgData_ST *) msg; - - SMS_INIT_MSG(msg, MSG_SMS_SWDOWNLOAD_TRIGGER_REQ, - sizeof(struct SmsMsgHdr_ST) + - sizeof(u32) * 5); - - TriggerMsg->msgData[0] = firmware->StartAddress; - /* Entry point */ - TriggerMsg->msgData[1] = 5; /* Priority */ - TriggerMsg->msgData[2] = 0x200; /* Stack size */ - TriggerMsg->msgData[3] = 0; /* Parameter */ - TriggerMsg->msgData[4] = 4; /* Task ID */ - - if (coredev->device_flags & SMS_ROM_NO_RESPONSE) { - rc = coredev->sendrequest_handler( - coredev->context, TriggerMsg, - TriggerMsg->xMsgHeader.msgLength); - msleep(100); - } else - rc = smscore_sendrequest_and_wait( - coredev, TriggerMsg, - TriggerMsg->xMsgHeader.msgLength, - &coredev->trigger_done); - } else { - SMS_INIT_MSG(msg, MSG_SW_RELOAD_EXEC_REQ, - sizeof(struct SmsMsgHdr_ST)); - - rc = coredev->sendrequest_handler(coredev->context, - msg, msg->msgLength); - } - msleep(500); - } - - sms_debug("rc=%d, postload=%p ", rc, - coredev->postload_handler); - - kfree(msg); - - return ((rc >= 0) && coredev->postload_handler) ? - coredev->postload_handler(coredev->context) : - rc; -} - -/** - * loads specified firmware into a buffer and calls device loadfirmware_handler - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * @param filename null-terminated string specifies firmware file name - * @param loadfirmware_handler device handler that loads firmware - * - * @return 0 on success, <0 on error. - */ -static int smscore_load_firmware_from_file(struct smscore_device_t *coredev, - char *filename, - loadfirmware_t loadfirmware_handler) -{ - int rc = -ENOENT; - const struct firmware *fw; - u8 *fw_buffer; - - if (loadfirmware_handler == NULL && !(coredev->device_flags & - SMS_DEVICE_FAMILY2)) - return -EINVAL; - - rc = request_firmware(&fw, filename, coredev->device); - if (rc < 0) { - sms_info("failed to open \"%s\"", filename); - return rc; - } - sms_info("read FW %s, size=%zd", filename, fw->size); - fw_buffer = kmalloc(ALIGN(fw->size, SMS_ALLOC_ALIGNMENT), - GFP_KERNEL | GFP_DMA); - if (fw_buffer) { - memcpy(fw_buffer, fw->data, fw->size); - - rc = (coredev->device_flags & SMS_DEVICE_FAMILY2) ? - smscore_load_firmware_family2(coredev, - fw_buffer, - fw->size) : - loadfirmware_handler(coredev->context, - fw_buffer, fw->size); - - kfree(fw_buffer); - } else { - sms_info("failed to allocate firmware buffer"); - rc = -ENOMEM; - } - - release_firmware(fw); - - return rc; -} - -/** - * notifies all clients registered with the device, notifies hotplugs, - * frees all buffers and coredev object - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * - * @return 0 on success, <0 on error. - */ -void smscore_unregister_device(struct smscore_device_t *coredev) -{ - struct smscore_buffer_t *cb; - int num_buffers = 0; - int retry = 0; - - kmutex_lock(&g_smscore_deviceslock); - - /* Release input device (IR) resources */ - sms_ir_exit(coredev); - - smscore_notify_clients(coredev); - smscore_notify_callbacks(coredev, NULL, 0); - - /* at this point all buffers should be back - * onresponse must no longer be called */ - - while (1) { - while (!list_empty(&coredev->buffers)) { - cb = (struct smscore_buffer_t *) coredev->buffers.next; - list_del(&cb->entry); - kfree(cb); - num_buffers++; - } - if (num_buffers == coredev->num_buffers) - break; - if (++retry > 10) { - sms_info("exiting although " - "not all buffers released."); - break; - } - - sms_info("waiting for %d buffer(s)", - coredev->num_buffers - num_buffers); - msleep(100); - } - - sms_info("freed %d buffers", num_buffers); - - if (coredev->common_buffer) - dma_free_coherent(NULL, coredev->common_buffer_size, - coredev->common_buffer, coredev->common_buffer_phys); - - if (coredev->fw_buf != NULL) - kfree(coredev->fw_buf); - - list_del(&coredev->entry); - kfree(coredev); - - kmutex_unlock(&g_smscore_deviceslock); - - sms_info("device %p destroyed", coredev); -} -EXPORT_SYMBOL_GPL(smscore_unregister_device); - -static int smscore_detect_mode(struct smscore_device_t *coredev) -{ - void *buffer = kmalloc(sizeof(struct SmsMsgHdr_ST) + SMS_DMA_ALIGNMENT, - GFP_KERNEL | GFP_DMA); - struct SmsMsgHdr_ST *msg = - (struct SmsMsgHdr_ST *) SMS_ALIGN_ADDRESS(buffer); - int rc; - - if (!buffer) - return -ENOMEM; - - SMS_INIT_MSG(msg, MSG_SMS_GET_VERSION_EX_REQ, - sizeof(struct SmsMsgHdr_ST)); - - rc = smscore_sendrequest_and_wait(coredev, msg, msg->msgLength, - &coredev->version_ex_done); - if (rc == -ETIME) { - sms_err("MSG_SMS_GET_VERSION_EX_REQ failed first try"); - - if (wait_for_completion_timeout(&coredev->resume_done, - msecs_to_jiffies(5000))) { - rc = smscore_sendrequest_and_wait( - coredev, msg, msg->msgLength, - &coredev->version_ex_done); - if (rc < 0) - sms_err("MSG_SMS_GET_VERSION_EX_REQ failed " - "second try, rc %d", rc); - } else - rc = -ETIME; - } - - kfree(buffer); - - return rc; -} - -static char *smscore_fw_lkup[][SMS_NUM_OF_DEVICE_TYPES] = { - /*Stellar NOVA A0 Nova B0 VEGA*/ - /*DVBT*/ - {"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"}, - /*DVBH*/ - {"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"}, - /*TDMB*/ - {"none", "tdmb_nova_12mhz.inp", "tdmb_nova_12mhz_b0.inp", "none"}, - /*DABIP*/ - {"none", "none", "none", "none"}, - /*BDA*/ - {"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"}, - /*ISDBT*/ - {"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"}, - /*ISDBTBDA*/ - {"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"}, - /*CMMB*/ - {"none", "none", "none", "cmmb_vega_12mhz.inp"} -}; - -static inline char *sms_get_fw_name(struct smscore_device_t *coredev, - int mode, enum sms_device_type_st type) -{ - char **fw = sms_get_board(smscore_get_board_id(coredev))->fw; - return (fw && fw[mode]) ? fw[mode] : smscore_fw_lkup[mode][type]; -} - -/** - * calls device handler to change mode of operation - * NOTE: stellar/usb may disconnect when changing mode - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * @param mode requested mode of operation - * - * @return 0 on success, <0 on error. - */ -int smscore_set_device_mode(struct smscore_device_t *coredev, int mode) -{ - void *buffer; - int rc = 0; - enum sms_device_type_st type; - - sms_debug("set device mode to %d", mode); - if (coredev->device_flags & SMS_DEVICE_FAMILY2) { - if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) { - sms_err("invalid mode specified %d", mode); - return -EINVAL; - } - - smscore_registry_setmode(coredev->devpath, mode); - - if (!(coredev->device_flags & SMS_DEVICE_NOT_READY)) { - rc = smscore_detect_mode(coredev); - if (rc < 0) { - sms_err("mode detect failed %d", rc); - return rc; - } - } - - if (coredev->mode == mode) { - sms_info("device mode %d already set", mode); - return 0; - } - - if (!(coredev->modes_supported & (1 << mode))) { - char *fw_filename; - - type = smscore_registry_gettype(coredev->devpath); - fw_filename = sms_get_fw_name(coredev, mode, type); - - rc = smscore_load_firmware_from_file(coredev, - fw_filename, NULL); - if (rc < 0) { - sms_warn("error %d loading firmware: %s, " - "trying again with default firmware", - rc, fw_filename); - - /* try again with the default firmware */ - fw_filename = smscore_fw_lkup[mode][type]; - rc = smscore_load_firmware_from_file(coredev, - fw_filename, NULL); - - if (rc < 0) { - sms_warn("error %d loading " - "firmware: %s", rc, - fw_filename); - return rc; - } - } - sms_log("firmware download success: %s", fw_filename); - } else - sms_info("mode %d supported by running " - "firmware", mode); - - buffer = kmalloc(sizeof(struct SmsMsgData_ST) + - SMS_DMA_ALIGNMENT, GFP_KERNEL | GFP_DMA); - if (buffer) { - struct SmsMsgData_ST *msg = - (struct SmsMsgData_ST *) - SMS_ALIGN_ADDRESS(buffer); - - SMS_INIT_MSG(&msg->xMsgHeader, MSG_SMS_INIT_DEVICE_REQ, - sizeof(struct SmsMsgData_ST)); - msg->msgData[0] = mode; - - rc = smscore_sendrequest_and_wait( - coredev, msg, msg->xMsgHeader.msgLength, - &coredev->init_device_done); - - kfree(buffer); - } else { - sms_err("Could not allocate buffer for " - "init device message."); - rc = -ENOMEM; - } - } else { - if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) { - sms_err("invalid mode specified %d", mode); - return -EINVAL; - } - - smscore_registry_setmode(coredev->devpath, mode); - - if (coredev->detectmode_handler) - coredev->detectmode_handler(coredev->context, - &coredev->mode); - - if (coredev->mode != mode && coredev->setmode_handler) - rc = coredev->setmode_handler(coredev->context, mode); - } - - if (rc >= 0) { - coredev->mode = mode; - coredev->device_flags &= ~SMS_DEVICE_NOT_READY; - } - - if (rc < 0) - sms_err("return error code %d.", rc); - return rc; -} - -/** - * calls device handler to get current mode of operation - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * - * @return current mode - */ -int smscore_get_device_mode(struct smscore_device_t *coredev) -{ - return coredev->mode; -} -EXPORT_SYMBOL_GPL(smscore_get_device_mode); - -/** - * find client by response id & type within the clients list. - * return client handle or NULL. - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * @param data_type client data type (SMS_DONT_CARE for all types) - * @param id client id (SMS_DONT_CARE for all id) - * - */ -static struct -smscore_client_t *smscore_find_client(struct smscore_device_t *coredev, - int data_type, int id) -{ - struct list_head *first; - struct smscore_client_t *client; - unsigned long flags; - struct list_head *firstid; - struct smscore_idlist_t *client_id; - - spin_lock_irqsave(&coredev->clientslock, flags); - first = &coredev->clients; - list_for_each_entry(client, first, entry) { - firstid = &client->idlist; - list_for_each_entry(client_id, firstid, entry) { - if ((client_id->id == id) && - (client_id->data_type == data_type || - (client_id->data_type == 0))) - goto found; - } - } - client = NULL; -found: - spin_unlock_irqrestore(&coredev->clientslock, flags); - return client; -} - -/** - * find client by response id/type, call clients onresponse handler - * return buffer to pool on error - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * @param cb pointer to response buffer descriptor - * - */ -void smscore_onresponse(struct smscore_device_t *coredev, - struct smscore_buffer_t *cb) { - struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) ((u8 *) cb->p - + cb->offset); - struct smscore_client_t *client; - int rc = -EBUSY; - static unsigned long last_sample_time; /* = 0; */ - static int data_total; /* = 0; */ - unsigned long time_now = jiffies_to_msecs(jiffies); - - if (!last_sample_time) - last_sample_time = time_now; - - if (time_now - last_sample_time > 10000) { - sms_debug("\ndata rate %d bytes/secs", - (int)((data_total * 1000) / - (time_now - last_sample_time))); - - last_sample_time = time_now; - data_total = 0; - } - - data_total += cb->size; - /* Do we need to re-route? */ - if ((phdr->msgType == MSG_SMS_HO_PER_SLICES_IND) || - (phdr->msgType == MSG_SMS_TRANSMISSION_IND)) { - if (coredev->mode == DEVICE_MODE_DVBT_BDA) - phdr->msgDstId = DVBT_BDA_CONTROL_MSG_ID; - } - - - client = smscore_find_client(coredev, phdr->msgType, phdr->msgDstId); - - /* If no client registered for type & id, - * check for control client where type is not registered */ - if (client) - rc = client->onresponse_handler(client->context, cb); - - if (rc < 0) { - switch (phdr->msgType) { - case MSG_SMS_GET_VERSION_EX_RES: - { - struct SmsVersionRes_ST *ver = - (struct SmsVersionRes_ST *) phdr; - sms_debug("MSG_SMS_GET_VERSION_EX_RES " - "id %d prots 0x%x ver %d.%d", - ver->FirmwareId, ver->SupportedProtocols, - ver->RomVersionMajor, ver->RomVersionMinor); - - coredev->mode = ver->FirmwareId == 255 ? - DEVICE_MODE_NONE : ver->FirmwareId; - coredev->modes_supported = ver->SupportedProtocols; - - complete(&coredev->version_ex_done); - break; - } - case MSG_SMS_INIT_DEVICE_RES: - sms_debug("MSG_SMS_INIT_DEVICE_RES"); - complete(&coredev->init_device_done); - break; - case MSG_SW_RELOAD_START_RES: - sms_debug("MSG_SW_RELOAD_START_RES"); - complete(&coredev->reload_start_done); - break; - case MSG_SMS_DATA_DOWNLOAD_RES: - complete(&coredev->data_download_done); - break; - case MSG_SW_RELOAD_EXEC_RES: - sms_debug("MSG_SW_RELOAD_EXEC_RES"); - break; - case MSG_SMS_SWDOWNLOAD_TRIGGER_RES: - sms_debug("MSG_SMS_SWDOWNLOAD_TRIGGER_RES"); - complete(&coredev->trigger_done); - break; - case MSG_SMS_SLEEP_RESUME_COMP_IND: - complete(&coredev->resume_done); - break; - case MSG_SMS_GPIO_CONFIG_EX_RES: - sms_debug("MSG_SMS_GPIO_CONFIG_EX_RES"); - complete(&coredev->gpio_configuration_done); - break; - case MSG_SMS_GPIO_SET_LEVEL_RES: - sms_debug("MSG_SMS_GPIO_SET_LEVEL_RES"); - complete(&coredev->gpio_set_level_done); - break; - case MSG_SMS_GPIO_GET_LEVEL_RES: - { - u32 *msgdata = (u32 *) phdr; - coredev->gpio_get_res = msgdata[1]; - sms_debug("MSG_SMS_GPIO_GET_LEVEL_RES gpio level %d", - coredev->gpio_get_res); - complete(&coredev->gpio_get_level_done); - break; - } - case MSG_SMS_START_IR_RES: - complete(&coredev->ir_init_done); - break; - case MSG_SMS_IR_SAMPLES_IND: - sms_ir_event(coredev, - (const char *) - ((char *)phdr - + sizeof(struct SmsMsgHdr_ST)), - (int)phdr->msgLength - - sizeof(struct SmsMsgHdr_ST)); - break; - - default: - break; - } - smscore_putbuffer(coredev, cb); - } -} -EXPORT_SYMBOL_GPL(smscore_onresponse); - -/** - * return pointer to next free buffer descriptor from core pool - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * - * @return pointer to descriptor on success, NULL on error. - */ - -struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev) -{ - struct smscore_buffer_t *cb = NULL; - unsigned long flags; - - spin_lock_irqsave(&coredev->bufferslock, flags); - if (!list_empty(&coredev->buffers)) { - cb = (struct smscore_buffer_t *) coredev->buffers.next; - list_del(&cb->entry); - } - spin_unlock_irqrestore(&coredev->bufferslock, flags); - return cb; -} - -struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev) -{ - struct smscore_buffer_t *cb = NULL; - - wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev))); - - return cb; -} -EXPORT_SYMBOL_GPL(smscore_getbuffer); - -/** - * return buffer descriptor to a pool - * - * @param coredev pointer to a coredev object returned by - * smscore_register_device - * @param cb pointer buffer descriptor - * - */ -void smscore_putbuffer(struct smscore_device_t *coredev, - struct smscore_buffer_t *cb) { - wake_up_interruptible(&coredev->buffer_mng_waitq); - list_add_locked(&cb->entry, &coredev->buffers, &coredev->bufferslock); -} -EXPORT_SYMBOL_GPL(smscore_putbuffer); - -static int smscore_validate_client(struct smscore_device_t *coredev, - struct smscore_client_t *client, - int data_type, int id) -{ - struct smscore_idlist_t *listentry; - struct smscore_client_t *registered_client; - - if (!client) { - sms_err("bad parameter."); - return -EINVAL; - } - registered_client = smscore_find_client(coredev, data_type, id); - if (registered_client == client) - return 0; - - if (registered_client) { - sms_err("The msg ID already registered to another client."); - return -EEXIST; - } - listentry = kzalloc(sizeof(struct smscore_idlist_t), GFP_KERNEL); - if (!listentry) { - sms_err("Can't allocate memory for client id."); - return -ENOMEM; - } - listentry->id = id; - listentry->data_type = data_type; - list_add_locked(&listentry->entry, &client->idlist, - &coredev->clientslock); - return 0; -} - -/** - * creates smsclient object, check that id is taken by another client - * - * @param coredev pointer to a coredev object from clients hotplug - * @param initial_id all messages with this id would be sent to this client - * @param data_type all messages of this type would be sent to this client - * @param onresponse_handler client handler that is called to - * process incoming messages - * @param onremove_handler client handler that is called when device is removed - * @param context client-specific context - * @param client pointer to a value that receives created smsclient object - * - * @return 0 on success, <0 on error. - */ -int smscore_register_client(struct smscore_device_t *coredev, - struct smsclient_params_t *params, - struct smscore_client_t **client) -{ - struct smscore_client_t *newclient; - /* check that no other channel with same parameters exists */ - if (smscore_find_client(coredev, params->data_type, - params->initial_id)) { - sms_err("Client already exist."); - return -EEXIST; - } - - newclient = kzalloc(sizeof(struct smscore_client_t), GFP_KERNEL); - if (!newclient) { - sms_err("Failed to allocate memory for client."); - return -ENOMEM; - } - - INIT_LIST_HEAD(&newclient->idlist); - newclient->coredev = coredev; - newclient->onresponse_handler = params->onresponse_handler; - newclient->onremove_handler = params->onremove_handler; - newclient->context = params->context; - list_add_locked(&newclient->entry, &coredev->clients, - &coredev->clientslock); - smscore_validate_client(coredev, newclient, params->data_type, - params->initial_id); - *client = newclient; - sms_debug("%p %d %d", params->context, params->data_type, - params->initial_id); - - return 0; -} -EXPORT_SYMBOL_GPL(smscore_register_client); - -/** - * frees smsclient object and all subclients associated with it - * - * @param client pointer to smsclient object returned by - * smscore_register_client - * - */ -void smscore_unregister_client(struct smscore_client_t *client) -{ - struct smscore_device_t *coredev = client->coredev; - unsigned long flags; - - spin_lock_irqsave(&coredev->clientslock, flags); - - - while (!list_empty(&client->idlist)) { - struct smscore_idlist_t *identry = - (struct smscore_idlist_t *) client->idlist.next; - list_del(&identry->entry); - kfree(identry); - } - - sms_info("%p", client->context); - - list_del(&client->entry); - kfree(client); - - spin_unlock_irqrestore(&coredev->clientslock, flags); -} -EXPORT_SYMBOL_GPL(smscore_unregister_client); - -/** - * verifies that source id is not taken by another client, - * calls device handler to send requests to the device - * - * @param client pointer to smsclient object returned by - * smscore_register_client - * @param buffer pointer to a request buffer - * @param size size (in bytes) of request buffer - * - * @return 0 on success, <0 on error. - */ -int smsclient_sendrequest(struct smscore_client_t *client, - void *buffer, size_t size) -{ - struct smscore_device_t *coredev; - struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) buffer; - int rc; - - if (client == NULL) { - sms_err("Got NULL client"); - return -EINVAL; - } - - coredev = client->coredev; - - /* check that no other channel with same id exists */ - if (coredev == NULL) { - sms_err("Got NULL coredev"); - return -EINVAL; - } - - rc = smscore_validate_client(client->coredev, client, 0, - phdr->msgSrcId); - if (rc < 0) - return rc; - - return coredev->sendrequest_handler(coredev->context, buffer, size); -} -EXPORT_SYMBOL_GPL(smsclient_sendrequest); - - -/* old GPIO managements implementation */ -int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, - struct smscore_config_gpio *pinconfig) -{ - struct { - struct SmsMsgHdr_ST hdr; - u32 data[6]; - } msg; - - if (coredev->device_flags & SMS_DEVICE_FAMILY2) { - msg.hdr.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - msg.hdr.msgDstId = HIF_TASK; - msg.hdr.msgFlags = 0; - msg.hdr.msgType = MSG_SMS_GPIO_CONFIG_EX_REQ; - msg.hdr.msgLength = sizeof(msg); - - msg.data[0] = pin; - msg.data[1] = pinconfig->pullupdown; - - /* Convert slew rate for Nova: Fast(0) = 3 / Slow(1) = 0; */ - msg.data[2] = pinconfig->outputslewrate == 0 ? 3 : 0; - - switch (pinconfig->outputdriving) { - case SMS_GPIO_OUTPUTDRIVING_16mA: - msg.data[3] = 7; /* Nova - 16mA */ - break; - case SMS_GPIO_OUTPUTDRIVING_12mA: - msg.data[3] = 5; /* Nova - 11mA */ - break; - case SMS_GPIO_OUTPUTDRIVING_8mA: - msg.data[3] = 3; /* Nova - 7mA */ - break; - case SMS_GPIO_OUTPUTDRIVING_4mA: - default: - msg.data[3] = 2; /* Nova - 4mA */ - break; - } - - msg.data[4] = pinconfig->direction; - msg.data[5] = 0; - } else /* TODO: SMS_DEVICE_FAMILY1 */ - return -EINVAL; - - return coredev->sendrequest_handler(coredev->context, - &msg, sizeof(msg)); -} - -int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level) -{ - struct { - struct SmsMsgHdr_ST hdr; - u32 data[3]; - } msg; - - if (pin > MAX_GPIO_PIN_NUMBER) - return -EINVAL; - - msg.hdr.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - msg.hdr.msgDstId = HIF_TASK; - msg.hdr.msgFlags = 0; - msg.hdr.msgType = MSG_SMS_GPIO_SET_LEVEL_REQ; - msg.hdr.msgLength = sizeof(msg); - - msg.data[0] = pin; - msg.data[1] = level ? 1 : 0; - msg.data[2] = 0; - - return coredev->sendrequest_handler(coredev->context, - &msg, sizeof(msg)); -} - -/* new GPIO management implementation */ -static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum, - u32 *pGroupNum, u32 *pGroupCfg) { - - *pGroupCfg = 1; - - if (PinNum <= 1) { - *pTranslatedPinNum = 0; - *pGroupNum = 9; - *pGroupCfg = 2; - } else if (PinNum >= 2 && PinNum <= 6) { - *pTranslatedPinNum = 2; - *pGroupNum = 0; - *pGroupCfg = 2; - } else if (PinNum >= 7 && PinNum <= 11) { - *pTranslatedPinNum = 7; - *pGroupNum = 1; - } else if (PinNum >= 12 && PinNum <= 15) { - *pTranslatedPinNum = 12; - *pGroupNum = 2; - *pGroupCfg = 3; - } else if (PinNum == 16) { - *pTranslatedPinNum = 16; - *pGroupNum = 23; - } else if (PinNum >= 17 && PinNum <= 24) { - *pTranslatedPinNum = 17; - *pGroupNum = 3; - } else if (PinNum == 25) { - *pTranslatedPinNum = 25; - *pGroupNum = 6; - } else if (PinNum >= 26 && PinNum <= 28) { - *pTranslatedPinNum = 26; - *pGroupNum = 4; - } else if (PinNum == 29) { - *pTranslatedPinNum = 29; - *pGroupNum = 5; - *pGroupCfg = 2; - } else if (PinNum == 30) { - *pTranslatedPinNum = 30; - *pGroupNum = 8; - } else if (PinNum == 31) { - *pTranslatedPinNum = 31; - *pGroupNum = 17; - } else - return -1; - - *pGroupCfg <<= 24; - - return 0; -} - -int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, - struct smscore_gpio_config *pGpioConfig) { - - u32 totalLen; - u32 TranslatedPinNum = 0; - u32 GroupNum = 0; - u32 ElectricChar; - u32 groupCfg; - void *buffer; - int rc; - - struct SetGpioMsg { - struct SmsMsgHdr_ST xMsgHeader; - u32 msgData[6]; - } *pMsg; - - - if (PinNum > MAX_GPIO_PIN_NUMBER) - return -EINVAL; - - if (pGpioConfig == NULL) - return -EINVAL; - - totalLen = sizeof(struct SmsMsgHdr_ST) + (sizeof(u32) * 6); - - buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT, - GFP_KERNEL | GFP_DMA); - if (!buffer) - return -ENOMEM; - - pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer); - - pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - pMsg->xMsgHeader.msgDstId = HIF_TASK; - pMsg->xMsgHeader.msgFlags = 0; - pMsg->xMsgHeader.msgLength = (u16) totalLen; - pMsg->msgData[0] = PinNum; - - if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) { - pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_REQ; - if (GetGpioPinParams(PinNum, &TranslatedPinNum, &GroupNum, - &groupCfg) != 0) { - rc = -EINVAL; - goto free; - } - - pMsg->msgData[1] = TranslatedPinNum; - pMsg->msgData[2] = GroupNum; - ElectricChar = (pGpioConfig->PullUpDown) - | (pGpioConfig->InputCharacteristics << 2) - | (pGpioConfig->OutputSlewRate << 3) - | (pGpioConfig->OutputDriving << 4); - pMsg->msgData[3] = ElectricChar; - pMsg->msgData[4] = pGpioConfig->Direction; - pMsg->msgData[5] = groupCfg; - } else { - pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_EX_REQ; - pMsg->msgData[1] = pGpioConfig->PullUpDown; - pMsg->msgData[2] = pGpioConfig->OutputSlewRate; - pMsg->msgData[3] = pGpioConfig->OutputDriving; - pMsg->msgData[4] = pGpioConfig->Direction; - pMsg->msgData[5] = 0; - } - - smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg); - rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen, - &coredev->gpio_configuration_done); - - if (rc != 0) { - if (rc == -ETIME) - sms_err("smscore_gpio_configure timeout"); - else - sms_err("smscore_gpio_configure error"); - } -free: - kfree(buffer); - - return rc; -} - -int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum, - u8 NewLevel) { - - u32 totalLen; - int rc; - void *buffer; - - struct SetGpioMsg { - struct SmsMsgHdr_ST xMsgHeader; - u32 msgData[3]; /* keep it 3 ! */ - } *pMsg; - - if ((NewLevel > 1) || (PinNum > MAX_GPIO_PIN_NUMBER)) - return -EINVAL; - - totalLen = sizeof(struct SmsMsgHdr_ST) + - (3 * sizeof(u32)); /* keep it 3 ! */ - - buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT, - GFP_KERNEL | GFP_DMA); - if (!buffer) - return -ENOMEM; - - pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer); - - pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - pMsg->xMsgHeader.msgDstId = HIF_TASK; - pMsg->xMsgHeader.msgFlags = 0; - pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_SET_LEVEL_REQ; - pMsg->xMsgHeader.msgLength = (u16) totalLen; - pMsg->msgData[0] = PinNum; - pMsg->msgData[1] = NewLevel; - - /* Send message to SMS */ - smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg); - rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen, - &coredev->gpio_set_level_done); - - if (rc != 0) { - if (rc == -ETIME) - sms_err("smscore_gpio_set_level timeout"); - else - sms_err("smscore_gpio_set_level error"); - } - kfree(buffer); - - return rc; -} - -int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum, - u8 *level) { - - u32 totalLen; - int rc; - void *buffer; - - struct SetGpioMsg { - struct SmsMsgHdr_ST xMsgHeader; - u32 msgData[2]; - } *pMsg; - - - if (PinNum > MAX_GPIO_PIN_NUMBER) - return -EINVAL; - - totalLen = sizeof(struct SmsMsgHdr_ST) + (2 * sizeof(u32)); - - buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT, - GFP_KERNEL | GFP_DMA); - if (!buffer) - return -ENOMEM; - - pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer); - - pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - pMsg->xMsgHeader.msgDstId = HIF_TASK; - pMsg->xMsgHeader.msgFlags = 0; - pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_GET_LEVEL_REQ; - pMsg->xMsgHeader.msgLength = (u16) totalLen; - pMsg->msgData[0] = PinNum; - pMsg->msgData[1] = 0; - - /* Send message to SMS */ - smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg); - rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen, - &coredev->gpio_get_level_done); - - if (rc != 0) { - if (rc == -ETIME) - sms_err("smscore_gpio_get_level timeout"); - else - sms_err("smscore_gpio_get_level error"); - } - kfree(buffer); - - /* Its a race between other gpio_get_level() and the copy of the single - * global 'coredev->gpio_get_res' to the function's variable 'level' - */ - *level = coredev->gpio_get_res; - - return rc; -} - -static int __init smscore_module_init(void) -{ - int rc = 0; - - INIT_LIST_HEAD(&g_smscore_notifyees); - INIT_LIST_HEAD(&g_smscore_devices); - kmutex_init(&g_smscore_deviceslock); - - INIT_LIST_HEAD(&g_smscore_registry); - kmutex_init(&g_smscore_registrylock); - - return rc; -} - -static void __exit smscore_module_exit(void) -{ - kmutex_lock(&g_smscore_deviceslock); - while (!list_empty(&g_smscore_notifyees)) { - struct smscore_device_notifyee_t *notifyee = - (struct smscore_device_notifyee_t *) - g_smscore_notifyees.next; - - list_del(¬ifyee->entry); - kfree(notifyee); - } - kmutex_unlock(&g_smscore_deviceslock); - - kmutex_lock(&g_smscore_registrylock); - while (!list_empty(&g_smscore_registry)) { - struct smscore_registry_entry_t *entry = - (struct smscore_registry_entry_t *) - g_smscore_registry.next; - - list_del(&entry->entry); - kfree(entry); - } - kmutex_unlock(&g_smscore_registrylock); - - sms_debug(""); -} - -module_init(smscore_module_init); -module_exit(smscore_module_exit); - -MODULE_DESCRIPTION("Siano MDTV Core module"); -MODULE_AUTHOR("Siano Mobile Silicon, Inc. (uris@siano-ms.com)"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h deleted file mode 100644 index c592ae090397..000000000000 --- a/drivers/media/dvb/siano/smscoreapi.h +++ /dev/null @@ -1,775 +0,0 @@ -/**************************************************************** - -Siano Mobile Silicon, Inc. -MDTV receiver kernel modules. -Copyright (C) 2006-2008, Uri Shkolnik, Anatoly Greenblat - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - - This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -****************************************************************/ - -#ifndef __SMS_CORE_API_H__ -#define __SMS_CORE_API_H__ - -#include <linux/device.h> -#include <linux/list.h> -#include <linux/mm.h> -#include <linux/scatterlist.h> -#include <linux/types.h> -#include <linux/mutex.h> -#include <linux/wait.h> -#include <linux/timer.h> - -#include <asm/page.h> - -#include "smsir.h" - -#define kmutex_init(_p_) mutex_init(_p_) -#define kmutex_lock(_p_) mutex_lock(_p_) -#define kmutex_trylock(_p_) mutex_trylock(_p_) -#define kmutex_unlock(_p_) mutex_unlock(_p_) - -#ifndef min -#define min(a, b) (((a) < (b)) ? (a) : (b)) -#endif - -#define SMS_PROTOCOL_MAX_RAOUNDTRIP_MS (10000) -#define SMS_ALLOC_ALIGNMENT 128 -#define SMS_DMA_ALIGNMENT 16 -#define SMS_ALIGN_ADDRESS(addr) \ - ((((uintptr_t)(addr)) + (SMS_DMA_ALIGNMENT-1)) & ~(SMS_DMA_ALIGNMENT-1)) - -#define SMS_DEVICE_FAMILY2 1 -#define SMS_ROM_NO_RESPONSE 2 -#define SMS_DEVICE_NOT_READY 0x8000000 - -enum sms_device_type_st { - SMS_STELLAR = 0, - SMS_NOVA_A0, - SMS_NOVA_B0, - SMS_VEGA, - SMS_NUM_OF_DEVICE_TYPES -}; - -struct smscore_device_t; -struct smscore_client_t; -struct smscore_buffer_t; - -typedef int (*hotplug_t)(struct smscore_device_t *coredev, - struct device *device, int arrival); - -typedef int (*setmode_t)(void *context, int mode); -typedef void (*detectmode_t)(void *context, int *mode); -typedef int (*sendrequest_t)(void *context, void *buffer, size_t size); -typedef int (*loadfirmware_t)(void *context, void *buffer, size_t size); -typedef int (*preload_t)(void *context); -typedef int (*postload_t)(void *context); - -typedef int (*onresponse_t)(void *context, struct smscore_buffer_t *cb); -typedef void (*onremove_t)(void *context); - -struct smscore_buffer_t { - /* public members, once passed to clients can be changed freely */ - struct list_head entry; - int size; - int offset; - - /* private members, read-only for clients */ - void *p; - dma_addr_t phys; - unsigned long offset_in_common; -}; - -struct smsdevice_params_t { - struct device *device; - - int buffer_size; - int num_buffers; - - char devpath[32]; - unsigned long flags; - - setmode_t setmode_handler; - detectmode_t detectmode_handler; - sendrequest_t sendrequest_handler; - preload_t preload_handler; - postload_t postload_handler; - - void *context; - enum sms_device_type_st device_type; -}; - -struct smsclient_params_t { - int initial_id; - int data_type; - onresponse_t onresponse_handler; - onremove_t onremove_handler; - void *context; -}; - -struct smscore_device_t { - struct list_head entry; - - struct list_head clients; - struct list_head subclients; - spinlock_t clientslock; - - struct list_head buffers; - spinlock_t bufferslock; - int num_buffers; - - void *common_buffer; - int common_buffer_size; - dma_addr_t common_buffer_phys; - - void *context; - struct device *device; - - char devpath[32]; - unsigned long device_flags; - - setmode_t setmode_handler; - detectmode_t detectmode_handler; - sendrequest_t sendrequest_handler; - preload_t preload_handler; - postload_t postload_handler; - - int mode, modes_supported; - - /* host <--> device messages */ - struct completion version_ex_done, data_download_done, trigger_done; - struct completion init_device_done, reload_start_done, resume_done; - struct completion gpio_configuration_done, gpio_set_level_done; - struct completion gpio_get_level_done, ir_init_done; - - /* Buffer management */ - wait_queue_head_t buffer_mng_waitq; - - /* GPIO */ - int gpio_get_res; - - /* Target hardware board */ - int board_id; - - /* Firmware */ - u8 *fw_buf; - u32 fw_buf_size; - - /* Infrared (IR) */ - struct ir_t ir; - - int led_state; -}; - -/* GPIO definitions for antenna frequency domain control (SMS8021) */ -#define SMS_ANTENNA_GPIO_0 1 -#define SMS_ANTENNA_GPIO_1 0 - -#define BW_8_MHZ 0 -#define BW_7_MHZ 1 -#define BW_6_MHZ 2 -#define BW_5_MHZ 3 -#define BW_ISDBT_1SEG 4 -#define BW_ISDBT_3SEG 5 - -#define MSG_HDR_FLAG_SPLIT_MSG 4 - -#define MAX_GPIO_PIN_NUMBER 31 - -#define HIF_TASK 11 -#define SMS_HOST_LIB 150 -#define DVBT_BDA_CONTROL_MSG_ID 201 - -#define SMS_MAX_PAYLOAD_SIZE 240 -#define SMS_TUNE_TIMEOUT 500 - -#define MSG_SMS_GPIO_CONFIG_REQ 507 -#define MSG_SMS_GPIO_CONFIG_RES 508 -#define MSG_SMS_GPIO_SET_LEVEL_REQ 509 -#define MSG_SMS_GPIO_SET_LEVEL_RES 510 -#define MSG_SMS_GPIO_GET_LEVEL_REQ 511 -#define MSG_SMS_GPIO_GET_LEVEL_RES 512 -#define MSG_SMS_RF_TUNE_REQ 561 -#define MSG_SMS_RF_TUNE_RES 562 -#define MSG_SMS_INIT_DEVICE_REQ 578 -#define MSG_SMS_INIT_DEVICE_RES 579 -#define MSG_SMS_ADD_PID_FILTER_REQ 601 -#define MSG_SMS_ADD_PID_FILTER_RES 602 -#define MSG_SMS_REMOVE_PID_FILTER_REQ 603 -#define MSG_SMS_REMOVE_PID_FILTER_RES 604 -#define MSG_SMS_DAB_CHANNEL 607 -#define MSG_SMS_GET_PID_FILTER_LIST_REQ 608 -#define MSG_SMS_GET_PID_FILTER_LIST_RES 609 -#define MSG_SMS_GET_STATISTICS_RES 616 -#define MSG_SMS_GET_STATISTICS_REQ 615 -#define MSG_SMS_HO_PER_SLICES_IND 630 -#define MSG_SMS_SET_ANTENNA_CONFIG_REQ 651 -#define MSG_SMS_SET_ANTENNA_CONFIG_RES 652 -#define MSG_SMS_SLEEP_RESUME_COMP_IND 655 -#define MSG_SMS_DATA_DOWNLOAD_REQ 660 -#define MSG_SMS_DATA_DOWNLOAD_RES 661 -#define MSG_SMS_SWDOWNLOAD_TRIGGER_REQ 664 -#define MSG_SMS_SWDOWNLOAD_TRIGGER_RES 665 -#define MSG_SMS_SWDOWNLOAD_BACKDOOR_REQ 666 -#define MSG_SMS_SWDOWNLOAD_BACKDOOR_RES 667 -#define MSG_SMS_GET_VERSION_EX_REQ 668 -#define MSG_SMS_GET_VERSION_EX_RES 669 -#define MSG_SMS_SET_CLOCK_OUTPUT_REQ 670 -#define MSG_SMS_I2C_SET_FREQ_REQ 685 -#define MSG_SMS_GENERIC_I2C_REQ 687 -#define MSG_SMS_GENERIC_I2C_RES 688 -#define MSG_SMS_DVBT_BDA_DATA 693 -#define MSG_SW_RELOAD_REQ 697 -#define MSG_SMS_DATA_MSG 699 -#define MSG_SW_RELOAD_START_REQ 702 -#define MSG_SW_RELOAD_START_RES 703 -#define MSG_SW_RELOAD_EXEC_REQ 704 -#define MSG_SW_RELOAD_EXEC_RES 705 -#define MSG_SMS_SPI_INT_LINE_SET_REQ 710 -#define MSG_SMS_GPIO_CONFIG_EX_REQ 712 -#define MSG_SMS_GPIO_CONFIG_EX_RES 713 -#define MSG_SMS_ISDBT_TUNE_REQ 776 -#define MSG_SMS_ISDBT_TUNE_RES 777 -#define MSG_SMS_TRANSMISSION_IND 782 -#define MSG_SMS_START_IR_REQ 800 -#define MSG_SMS_START_IR_RES 801 -#define MSG_SMS_IR_SAMPLES_IND 802 -#define MSG_SMS_SIGNAL_DETECTED_IND 827 -#define MSG_SMS_NO_SIGNAL_IND 828 - -#define SMS_INIT_MSG_EX(ptr, type, src, dst, len) do { \ - (ptr)->msgType = type; (ptr)->msgSrcId = src; (ptr)->msgDstId = dst; \ - (ptr)->msgLength = len; (ptr)->msgFlags = 0; \ -} while (0) - -#define SMS_INIT_MSG(ptr, type, len) \ - SMS_INIT_MSG_EX(ptr, type, 0, HIF_TASK, len) - -enum SMS_DVB3_EVENTS { - DVB3_EVENT_INIT = 0, - DVB3_EVENT_SLEEP, - DVB3_EVENT_HOTPLUG, - DVB3_EVENT_FE_LOCK, - DVB3_EVENT_FE_UNLOCK, - DVB3_EVENT_UNC_OK, - DVB3_EVENT_UNC_ERR -}; - -enum SMS_DEVICE_MODE { - DEVICE_MODE_NONE = -1, - DEVICE_MODE_DVBT = 0, - DEVICE_MODE_DVBH, - DEVICE_MODE_DAB_TDMB, - DEVICE_MODE_DAB_TDMB_DABIP, - DEVICE_MODE_DVBT_BDA, - DEVICE_MODE_ISDBT, - DEVICE_MODE_ISDBT_BDA, - DEVICE_MODE_CMMB, - DEVICE_MODE_RAW_TUNER, - DEVICE_MODE_MAX, -}; - -struct SmsMsgHdr_ST { - u16 msgType; - u8 msgSrcId; - u8 msgDstId; - u16 msgLength; /* Length of entire message, including header */ - u16 msgFlags; -}; - -struct SmsMsgData_ST { - struct SmsMsgHdr_ST xMsgHeader; - u32 msgData[1]; -}; - -struct SmsMsgData_ST2 { - struct SmsMsgHdr_ST xMsgHeader; - u32 msgData[2]; -}; - -struct SmsDataDownload_ST { - struct SmsMsgHdr_ST xMsgHeader; - u32 MemAddr; - u8 Payload[SMS_MAX_PAYLOAD_SIZE]; -}; - -struct SmsVersionRes_ST { - struct SmsMsgHdr_ST xMsgHeader; - - u16 ChipModel; /* e.g. 0x1102 for SMS-1102 "Nova" */ - u8 Step; /* 0 - Step A */ - u8 MetalFix; /* 0 - Metal 0 */ - - /* FirmwareId 0xFF if ROM, otherwise the - * value indicated by SMSHOSTLIB_DEVICE_MODES_E */ - u8 FirmwareId; - /* SupportedProtocols Bitwise OR combination of - * supported protocols */ - u8 SupportedProtocols; - - u8 VersionMajor; - u8 VersionMinor; - u8 VersionPatch; - u8 VersionFieldPatch; - - u8 RomVersionMajor; - u8 RomVersionMinor; - u8 RomVersionPatch; - u8 RomVersionFieldPatch; - - u8 TextLabel[34]; -}; - -struct SmsFirmware_ST { - u32 CheckSum; - u32 Length; - u32 StartAddress; - u8 Payload[1]; -}; - -/* Statistics information returned as response for - * SmsHostApiGetStatistics_Req */ -struct SMSHOSTLIB_STATISTICS_ST { - u32 Reserved; /* Reserved */ - - /* Common parameters */ - u32 IsRfLocked; /* 0 - not locked, 1 - locked */ - u32 IsDemodLocked; /* 0 - not locked, 1 - locked */ - u32 IsExternalLNAOn; /* 0 - external LNA off, 1 - external LNA on */ - - /* Reception quality */ - s32 SNR; /* dB */ - u32 BER; /* Post Viterbi BER [1E-5] */ - u32 FIB_CRC; /* CRC errors percentage, valid only for DAB */ - u32 TS_PER; /* Transport stream PER, - 0xFFFFFFFF indicate N/A, valid only for DVB-T/H */ - u32 MFER; /* DVB-H frame error rate in percentage, - 0xFFFFFFFF indicate N/A, valid only for DVB-H */ - s32 RSSI; /* dBm */ - s32 InBandPwr; /* In band power in dBM */ - s32 CarrierOffset; /* Carrier Offset in bin/1024 */ - - /* Transmission parameters */ - u32 Frequency; /* Frequency in Hz */ - u32 Bandwidth; /* Bandwidth in MHz, valid only for DVB-T/H */ - u32 TransmissionMode; /* Transmission Mode, for DAB modes 1-4, - for DVB-T/H FFT mode carriers in Kilos */ - u32 ModemState; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET, - valid only for DVB-T/H */ - u32 GuardInterval; /* Guard Interval from - SMSHOSTLIB_GUARD_INTERVALS_ET, valid only for DVB-T/H */ - u32 CodeRate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET, - valid only for DVB-T/H */ - u32 LPCodeRate; /* Low Priority Code Rate from - SMSHOSTLIB_CODE_RATE_ET, valid only for DVB-T/H */ - u32 Hierarchy; /* Hierarchy from SMSHOSTLIB_HIERARCHY_ET, - valid only for DVB-T/H */ - u32 Constellation; /* Constellation from - SMSHOSTLIB_CONSTELLATION_ET, valid only for DVB-T/H */ - - /* Burst parameters, valid only for DVB-H */ - u32 BurstSize; /* Current burst size in bytes, - valid only for DVB-H */ - u32 BurstDuration; /* Current burst duration in mSec, - valid only for DVB-H */ - u32 BurstCycleTime; /* Current burst cycle time in mSec, - valid only for DVB-H */ - u32 CalculatedBurstCycleTime;/* Current burst cycle time in mSec, - as calculated by demodulator, valid only for DVB-H */ - u32 NumOfRows; /* Number of rows in MPE table, - valid only for DVB-H */ - u32 NumOfPaddCols; /* Number of padding columns in MPE table, - valid only for DVB-H */ - u32 NumOfPunctCols; /* Number of puncturing columns in MPE table, - valid only for DVB-H */ - u32 ErrorTSPackets; /* Number of erroneous - transport-stream packets */ - u32 TotalTSPackets; /* Total number of transport-stream packets */ - u32 NumOfValidMpeTlbs; /* Number of MPE tables which do not include - errors after MPE RS decoding */ - u32 NumOfInvalidMpeTlbs;/* Number of MPE tables which include errors - after MPE RS decoding */ - u32 NumOfCorrectedMpeTlbs;/* Number of MPE tables which were - corrected by MPE RS decoding */ - /* Common params */ - u32 BERErrorCount; /* Number of errornous SYNC bits. */ - u32 BERBitCount; /* Total number of SYNC bits. */ - - /* Interface information */ - u32 SmsToHostTxErrors; /* Total number of transmission errors. */ - - /* DAB/T-DMB */ - u32 PreBER; /* DAB/T-DMB only: Pre Viterbi BER [1E-5] */ - - /* DVB-H TPS parameters */ - u32 CellId; /* TPS Cell ID in bits 15..0, bits 31..16 zero; - if set to 0xFFFFFFFF cell_id not yet recovered */ - u32 DvbhSrvIndHP; /* DVB-H service indication info, bit 1 - - Time Slicing indicator, bit 0 - MPE-FEC indicator */ - u32 DvbhSrvIndLP; /* DVB-H service indication info, bit 1 - - Time Slicing indicator, bit 0 - MPE-FEC indicator */ - - u32 NumMPEReceived; /* DVB-H, Num MPE section received */ - - u32 ReservedFields[10]; /* Reserved */ -}; - -struct SmsMsgStatisticsInfo_ST { - u32 RequestResult; - - struct SMSHOSTLIB_STATISTICS_ST Stat; - - /* Split the calc of the SNR in DAB */ - u32 Signal; /* dB */ - u32 Noise; /* dB */ - -}; - -struct SMSHOSTLIB_ISDBT_LAYER_STAT_ST { - /* Per-layer information */ - u32 CodeRate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET, - * 255 means layer does not exist */ - u32 Constellation; /* Constellation from SMSHOSTLIB_CONSTELLATION_ET, - * 255 means layer does not exist */ - u32 BER; /* Post Viterbi BER [1E-5], 0xFFFFFFFF indicate N/A */ - u32 BERErrorCount; /* Post Viterbi Error Bits Count */ - u32 BERBitCount; /* Post Viterbi Total Bits Count */ - u32 PreBER; /* Pre Viterbi BER [1E-5], 0xFFFFFFFF indicate N/A */ - u32 TS_PER; /* Transport stream PER [%], 0xFFFFFFFF indicate N/A */ - u32 ErrorTSPackets; /* Number of erroneous transport-stream packets */ - u32 TotalTSPackets; /* Total number of transport-stream packets */ - u32 TILdepthI; /* Time interleaver depth I parameter, - * 255 means layer does not exist */ - u32 NumberOfSegments; /* Number of segments in layer A, - * 255 means layer does not exist */ - u32 TMCCErrors; /* TMCC errors */ -}; - -struct SMSHOSTLIB_STATISTICS_ISDBT_ST { - u32 StatisticsType; /* Enumerator identifying the type of the - * structure. Values are the same as - * SMSHOSTLIB_DEVICE_MODES_E - * - * This field MUST always be first in any - * statistics structure */ - - u32 FullSize; /* Total size of the structure returned by the modem. - * If the size requested by the host is smaller than - * FullSize, the struct will be truncated */ - - /* Common parameters */ - u32 IsRfLocked; /* 0 - not locked, 1 - locked */ - u32 IsDemodLocked; /* 0 - not locked, 1 - locked */ - u32 IsExternalLNAOn; /* 0 - external LNA off, 1 - external LNA on */ - - /* Reception quality */ - s32 SNR; /* dB */ - s32 RSSI; /* dBm */ - s32 InBandPwr; /* In band power in dBM */ - s32 CarrierOffset; /* Carrier Offset in Hz */ - - /* Transmission parameters */ - u32 Frequency; /* Frequency in Hz */ - u32 Bandwidth; /* Bandwidth in MHz */ - u32 TransmissionMode; /* ISDB-T transmission mode */ - u32 ModemState; /* 0 - Acquisition, 1 - Locked */ - u32 GuardInterval; /* Guard Interval, 1 divided by value */ - u32 SystemType; /* ISDB-T system type (ISDB-T / ISDB-Tsb) */ - u32 PartialReception; /* TRUE - partial reception, FALSE otherwise */ - u32 NumOfLayers; /* Number of ISDB-T layers in the network */ - - /* Per-layer information */ - /* Layers A, B and C */ - struct SMSHOSTLIB_ISDBT_LAYER_STAT_ST LayerInfo[3]; - /* Per-layer statistics, see SMSHOSTLIB_ISDBT_LAYER_STAT_ST */ - - /* Interface information */ - u32 SmsToHostTxErrors; /* Total number of transmission errors. */ -}; - -struct PID_STATISTICS_DATA_S { - struct PID_BURST_S { - u32 size; - u32 padding_cols; - u32 punct_cols; - u32 duration; - u32 cycle; - u32 calc_cycle; - } burst; - - u32 tot_tbl_cnt; - u32 invalid_tbl_cnt; - u32 tot_cor_tbl; -}; - -struct PID_DATA_S { - u32 pid; - u32 num_rows; - struct PID_STATISTICS_DATA_S pid_statistics; -}; - -#define CORRECT_STAT_RSSI(_stat) ((_stat).RSSI *= -1) -#define CORRECT_STAT_BANDWIDTH(_stat) (_stat.Bandwidth = 8 - _stat.Bandwidth) -#define CORRECT_STAT_TRANSMISSON_MODE(_stat) \ - if (_stat.TransmissionMode == 0) \ - _stat.TransmissionMode = 2; \ - else if (_stat.TransmissionMode == 1) \ - _stat.TransmissionMode = 8; \ - else \ - _stat.TransmissionMode = 4; - -struct TRANSMISSION_STATISTICS_S { - u32 Frequency; /* Frequency in Hz */ - u32 Bandwidth; /* Bandwidth in MHz */ - u32 TransmissionMode; /* FFT mode carriers in Kilos */ - u32 GuardInterval; /* Guard Interval from - SMSHOSTLIB_GUARD_INTERVALS_ET */ - u32 CodeRate; /* Code Rate from SMSHOSTLIB_CODE_RATE_ET */ - u32 LPCodeRate; /* Low Priority Code Rate from - SMSHOSTLIB_CODE_RATE_ET */ - u32 Hierarchy; /* Hierarchy from SMSHOSTLIB_HIERARCHY_ET */ - u32 Constellation; /* Constellation from - SMSHOSTLIB_CONSTELLATION_ET */ - - /* DVB-H TPS parameters */ - u32 CellId; /* TPS Cell ID in bits 15..0, bits 31..16 zero; - if set to 0xFFFFFFFF cell_id not yet recovered */ - u32 DvbhSrvIndHP; /* DVB-H service indication info, bit 1 - - Time Slicing indicator, bit 0 - MPE-FEC indicator */ - u32 DvbhSrvIndLP; /* DVB-H service indication info, bit 1 - - Time Slicing indicator, bit 0 - MPE-FEC indicator */ - u32 IsDemodLocked; /* 0 - not locked, 1 - locked */ -}; - -struct RECEPTION_STATISTICS_S { - u32 IsRfLocked; /* 0 - not locked, 1 - locked */ - u32 IsDemodLocked; /* 0 - not locked, 1 - locked */ - u32 IsExternalLNAOn; /* 0 - external LNA off, 1 - external LNA on */ - - u32 ModemState; /* from SMSHOSTLIB_DVB_MODEM_STATE_ET */ - s32 SNR; /* dB */ - u32 BER; /* Post Viterbi BER [1E-5] */ - u32 BERErrorCount; /* Number of erronous SYNC bits. */ - u32 BERBitCount; /* Total number of SYNC bits. */ - u32 TS_PER; /* Transport stream PER, - 0xFFFFFFFF indicate N/A */ - u32 MFER; /* DVB-H frame error rate in percentage, - 0xFFFFFFFF indicate N/A, valid only for DVB-H */ - s32 RSSI; /* dBm */ - s32 InBandPwr; /* In band power in dBM */ - s32 CarrierOffset; /* Carrier Offset in bin/1024 */ - u32 ErrorTSPackets; /* Number of erroneous - transport-stream packets */ - u32 TotalTSPackets; /* Total number of transport-stream packets */ - - s32 MRC_SNR; /* dB */ - s32 MRC_RSSI; /* dBm */ - s32 MRC_InBandPwr; /* In band power in dBM */ -}; - - -/* Statistics information returned as response for - * SmsHostApiGetStatisticsEx_Req for DVB applications, SMS1100 and up */ -struct SMSHOSTLIB_STATISTICS_DVB_S { - /* Reception */ - struct RECEPTION_STATISTICS_S ReceptionData; - - /* Transmission parameters */ - struct TRANSMISSION_STATISTICS_S TransmissionData; - - /* Burst parameters, valid only for DVB-H */ -#define SRVM_MAX_PID_FILTERS 8 - struct PID_DATA_S PidData[SRVM_MAX_PID_FILTERS]; -}; - -struct SRVM_SIGNAL_STATUS_S { - u32 result; - u32 snr; - u32 tsPackets; - u32 etsPackets; - u32 constellation; - u32 hpCode; - u32 tpsSrvIndLP; - u32 tpsSrvIndHP; - u32 cellId; - u32 reason; - - s32 inBandPower; - u32 requestId; -}; - -struct SMSHOSTLIB_I2C_REQ_ST { - u32 DeviceAddress; /* I2c device address */ - u32 WriteCount; /* number of bytes to write */ - u32 ReadCount; /* number of bytes to read */ - u8 Data[1]; -}; - -struct SMSHOSTLIB_I2C_RES_ST { - u32 Status; /* non-zero value in case of failure */ - u32 ReadCount; /* number of bytes read */ - u8 Data[1]; -}; - - -struct smscore_config_gpio { -#define SMS_GPIO_DIRECTION_INPUT 0 -#define SMS_GPIO_DIRECTION_OUTPUT 1 - u8 direction; - -#define SMS_GPIO_PULLUPDOWN_NONE 0 -#define SMS_GPIO_PULLUPDOWN_PULLDOWN 1 -#define SMS_GPIO_PULLUPDOWN_PULLUP 2 -#define SMS_GPIO_PULLUPDOWN_KEEPER 3 - u8 pullupdown; - -#define SMS_GPIO_INPUTCHARACTERISTICS_NORMAL 0 -#define SMS_GPIO_INPUTCHARACTERISTICS_SCHMITT 1 - u8 inputcharacteristics; - -#define SMS_GPIO_OUTPUTSLEWRATE_FAST 0 -#define SMS_GPIO_OUTPUTSLEWRATE_SLOW 1 - u8 outputslewrate; - -#define SMS_GPIO_OUTPUTDRIVING_4mA 0 -#define SMS_GPIO_OUTPUTDRIVING_8mA 1 -#define SMS_GPIO_OUTPUTDRIVING_12mA 2 -#define SMS_GPIO_OUTPUTDRIVING_16mA 3 - u8 outputdriving; -}; - -struct smscore_gpio_config { -#define SMS_GPIO_DIRECTION_INPUT 0 -#define SMS_GPIO_DIRECTION_OUTPUT 1 - u8 Direction; - -#define SMS_GPIO_PULL_UP_DOWN_NONE 0 -#define SMS_GPIO_PULL_UP_DOWN_PULLDOWN 1 -#define SMS_GPIO_PULL_UP_DOWN_PULLUP 2 -#define SMS_GPIO_PULL_UP_DOWN_KEEPER 3 - u8 PullUpDown; - -#define SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL 0 -#define SMS_GPIO_INPUT_CHARACTERISTICS_SCHMITT 1 - u8 InputCharacteristics; - -#define SMS_GPIO_OUTPUT_SLEW_RATE_SLOW 1 /* 10xx */ -#define SMS_GPIO_OUTPUT_SLEW_RATE_FAST 0 /* 10xx */ - - -#define SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS 0 /* 11xx */ -#define SMS_GPIO_OUTPUT_SLEW_RATE_0_9_V_NS 1 /* 11xx */ -#define SMS_GPIO_OUTPUT_SLEW_RATE_1_7_V_NS 2 /* 11xx */ -#define SMS_GPIO_OUTPUT_SLEW_RATE_3_3_V_NS 3 /* 11xx */ - u8 OutputSlewRate; - -#define SMS_GPIO_OUTPUT_DRIVING_S_4mA 0 /* 10xx */ -#define SMS_GPIO_OUTPUT_DRIVING_S_8mA 1 /* 10xx */ -#define SMS_GPIO_OUTPUT_DRIVING_S_12mA 2 /* 10xx */ -#define SMS_GPIO_OUTPUT_DRIVING_S_16mA 3 /* 10xx */ - -#define SMS_GPIO_OUTPUT_DRIVING_1_5mA 0 /* 11xx */ -#define SMS_GPIO_OUTPUT_DRIVING_2_8mA 1 /* 11xx */ -#define SMS_GPIO_OUTPUT_DRIVING_4mA 2 /* 11xx */ -#define SMS_GPIO_OUTPUT_DRIVING_7mA 3 /* 11xx */ -#define SMS_GPIO_OUTPUT_DRIVING_10mA 4 /* 11xx */ -#define SMS_GPIO_OUTPUT_DRIVING_11mA 5 /* 11xx */ -#define SMS_GPIO_OUTPUT_DRIVING_14mA 6 /* 11xx */ -#define SMS_GPIO_OUTPUT_DRIVING_16mA 7 /* 11xx */ - u8 OutputDriving; -}; - -extern void smscore_registry_setmode(char *devpath, int mode); -extern int smscore_registry_getmode(char *devpath); - -extern int smscore_register_hotplug(hotplug_t hotplug); -extern void smscore_unregister_hotplug(hotplug_t hotplug); - -extern int smscore_register_device(struct smsdevice_params_t *params, - struct smscore_device_t **coredev); -extern void smscore_unregister_device(struct smscore_device_t *coredev); - -extern int smscore_start_device(struct smscore_device_t *coredev); -extern int smscore_load_firmware(struct smscore_device_t *coredev, - char *filename, - loadfirmware_t loadfirmware_handler); - -extern int smscore_set_device_mode(struct smscore_device_t *coredev, int mode); -extern int smscore_get_device_mode(struct smscore_device_t *coredev); - -extern int smscore_register_client(struct smscore_device_t *coredev, - struct smsclient_params_t *params, - struct smscore_client_t **client); -extern void smscore_unregister_client(struct smscore_client_t *client); - -extern int smsclient_sendrequest(struct smscore_client_t *client, - void *buffer, size_t size); -extern void smscore_onresponse(struct smscore_device_t *coredev, - struct smscore_buffer_t *cb); - -extern int smscore_get_common_buffer_size(struct smscore_device_t *coredev); -extern int smscore_map_common_buffer(struct smscore_device_t *coredev, - struct vm_area_struct *vma); -extern int smscore_get_fw_filename(struct smscore_device_t *coredev, - int mode, char *filename); -extern int smscore_send_fw_file(struct smscore_device_t *coredev, - u8 *ufwbuf, int size); - -extern -struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev); -extern void smscore_putbuffer(struct smscore_device_t *coredev, - struct smscore_buffer_t *cb); - -/* old GPIO management */ -int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, - struct smscore_config_gpio *pinconfig); -int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level); - -/* new GPIO management */ -extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, - struct smscore_gpio_config *pGpioConfig); -extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum, - u8 NewLevel); -extern int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum, - u8 *level); - -void smscore_set_board_id(struct smscore_device_t *core, int id); -int smscore_get_board_id(struct smscore_device_t *core); - -int smscore_led_state(struct smscore_device_t *core, int led); - - -/* ------------------------------------------------------------------------ */ - -#define DBG_INFO 1 -#define DBG_ADV 2 - -#define sms_printk(kern, fmt, arg...) \ - printk(kern "%s: " fmt "\n", __func__, ##arg) - -#define dprintk(kern, lvl, fmt, arg...) do {\ - if (sms_dbg & lvl) \ - sms_printk(kern, fmt, ##arg); } while (0) - -#define sms_log(fmt, arg...) sms_printk(KERN_INFO, fmt, ##arg) -#define sms_err(fmt, arg...) \ - sms_printk(KERN_ERR, "line: %d: " fmt, __LINE__, ##arg) -#define sms_warn(fmt, arg...) sms_printk(KERN_WARNING, fmt, ##arg) -#define sms_info(fmt, arg...) \ - dprintk(KERN_INFO, DBG_INFO, fmt, ##arg) -#define sms_debug(fmt, arg...) \ - dprintk(KERN_DEBUG, DBG_ADV, fmt, ##arg) - - -#endif /* __SMS_CORE_API_H__ */ diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c deleted file mode 100644 index aa77e54a8fae..000000000000 --- a/drivers/media/dvb/siano/smsdvb.c +++ /dev/null @@ -1,1078 +0,0 @@ -/**************************************************************** - -Siano Mobile Silicon, Inc. -MDTV receiver kernel modules. -Copyright (C) 2006-2008, Uri Shkolnik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - - This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -****************************************************************/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> - -#include "dmxdev.h" -#include "dvbdev.h" -#include "dvb_demux.h" -#include "dvb_frontend.h" - -#include "smscoreapi.h" -#include "smsendian.h" -#include "sms-cards.h" - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct smsdvb_client_t { - struct list_head entry; - - struct smscore_device_t *coredev; - struct smscore_client_t *smsclient; - - struct dvb_adapter adapter; - struct dvb_demux demux; - struct dmxdev dmxdev; - struct dvb_frontend frontend; - - fe_status_t fe_status; - - struct completion tune_done; - - struct SMSHOSTLIB_STATISTICS_DVB_S sms_stat_dvb; - int event_fe_state; - int event_unc_state; -}; - -static struct list_head g_smsdvb_clients; -static struct mutex g_smsdvb_clientslock; - -static int sms_dbg; -module_param_named(debug, sms_dbg, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))"); - -/* Events that may come from DVB v3 adapter */ -static void sms_board_dvb3_event(struct smsdvb_client_t *client, - enum SMS_DVB3_EVENTS event) { - - struct smscore_device_t *coredev = client->coredev; - switch (event) { - case DVB3_EVENT_INIT: - sms_debug("DVB3_EVENT_INIT"); - sms_board_event(coredev, BOARD_EVENT_BIND); - break; - case DVB3_EVENT_SLEEP: - sms_debug("DVB3_EVENT_SLEEP"); - sms_board_event(coredev, BOARD_EVENT_POWER_SUSPEND); - break; - case DVB3_EVENT_HOTPLUG: - sms_debug("DVB3_EVENT_HOTPLUG"); - sms_board_event(coredev, BOARD_EVENT_POWER_INIT); - break; - case DVB3_EVENT_FE_LOCK: - if (client->event_fe_state != DVB3_EVENT_FE_LOCK) { - client->event_fe_state = DVB3_EVENT_FE_LOCK; - sms_debug("DVB3_EVENT_FE_LOCK"); - sms_board_event(coredev, BOARD_EVENT_FE_LOCK); - } - break; - case DVB3_EVENT_FE_UNLOCK: - if (client->event_fe_state != DVB3_EVENT_FE_UNLOCK) { - client->event_fe_state = DVB3_EVENT_FE_UNLOCK; - sms_debug("DVB3_EVENT_FE_UNLOCK"); - sms_board_event(coredev, BOARD_EVENT_FE_UNLOCK); - } - break; - case DVB3_EVENT_UNC_OK: - if (client->event_unc_state != DVB3_EVENT_UNC_OK) { - client->event_unc_state = DVB3_EVENT_UNC_OK; - sms_debug("DVB3_EVENT_UNC_OK"); - sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_OK); - } - break; - case DVB3_EVENT_UNC_ERR: - if (client->event_unc_state != DVB3_EVENT_UNC_ERR) { - client->event_unc_state = DVB3_EVENT_UNC_ERR; - sms_debug("DVB3_EVENT_UNC_ERR"); - sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_ERRORS); - } - break; - - default: - sms_err("Unknown dvb3 api event"); - break; - } -} - - -static void smsdvb_update_dvb_stats(struct RECEPTION_STATISTICS_S *pReceptionData, - struct SMSHOSTLIB_STATISTICS_ST *p) -{ - if (sms_dbg & 2) { - printk(KERN_DEBUG "Reserved = %d", p->Reserved); - printk(KERN_DEBUG "IsRfLocked = %d", p->IsRfLocked); - printk(KERN_DEBUG "IsDemodLocked = %d", p->IsDemodLocked); - printk(KERN_DEBUG "IsExternalLNAOn = %d", p->IsExternalLNAOn); - printk(KERN_DEBUG "SNR = %d", p->SNR); - printk(KERN_DEBUG "BER = %d", p->BER); - printk(KERN_DEBUG "FIB_CRC = %d", p->FIB_CRC); - printk(KERN_DEBUG "TS_PER = %d", p->TS_PER); - printk(KERN_DEBUG "MFER = %d", p->MFER); - printk(KERN_DEBUG "RSSI = %d", p->RSSI); - printk(KERN_DEBUG "InBandPwr = %d", p->InBandPwr); - printk(KERN_DEBUG "CarrierOffset = %d", p->CarrierOffset); - printk(KERN_DEBUG "Frequency = %d", p->Frequency); - printk(KERN_DEBUG "Bandwidth = %d", p->Bandwidth); - printk(KERN_DEBUG "TransmissionMode = %d", p->TransmissionMode); - printk(KERN_DEBUG "ModemState = %d", p->ModemState); - printk(KERN_DEBUG "GuardInterval = %d", p->GuardInterval); - printk(KERN_DEBUG "CodeRate = %d", p->CodeRate); - printk(KERN_DEBUG "LPCodeRate = %d", p->LPCodeRate); - printk(KERN_DEBUG "Hierarchy = %d", p->Hierarchy); - printk(KERN_DEBUG "Constellation = %d", p->Constellation); - printk(KERN_DEBUG "BurstSize = %d", p->BurstSize); - printk(KERN_DEBUG "BurstDuration = %d", p->BurstDuration); - printk(KERN_DEBUG "BurstCycleTime = %d", p->BurstCycleTime); - printk(KERN_DEBUG "CalculatedBurstCycleTime = %d", p->CalculatedBurstCycleTime); - printk(KERN_DEBUG "NumOfRows = %d", p->NumOfRows); - printk(KERN_DEBUG "NumOfPaddCols = %d", p->NumOfPaddCols); - printk(KERN_DEBUG "NumOfPunctCols = %d", p->NumOfPunctCols); - printk(KERN_DEBUG "ErrorTSPackets = %d", p->ErrorTSPackets); - printk(KERN_DEBUG "TotalTSPackets = %d", p->TotalTSPackets); - printk(KERN_DEBUG "NumOfValidMpeTlbs = %d", p->NumOfValidMpeTlbs); - printk(KERN_DEBUG "NumOfInvalidMpeTlbs = %d", p->NumOfInvalidMpeTlbs); - printk(KERN_DEBUG "NumOfCorrectedMpeTlbs = %d", p->NumOfCorrectedMpeTlbs); - printk(KERN_DEBUG "BERErrorCount = %d", p->BERErrorCount); - printk(KERN_DEBUG "BERBitCount = %d", p->BERBitCount); - printk(KERN_DEBUG "SmsToHostTxErrors = %d", p->SmsToHostTxErrors); - printk(KERN_DEBUG "PreBER = %d", p->PreBER); - printk(KERN_DEBUG "CellId = %d", p->CellId); - printk(KERN_DEBUG "DvbhSrvIndHP = %d", p->DvbhSrvIndHP); - printk(KERN_DEBUG "DvbhSrvIndLP = %d", p->DvbhSrvIndLP); - printk(KERN_DEBUG "NumMPEReceived = %d", p->NumMPEReceived); - } - - pReceptionData->IsDemodLocked = p->IsDemodLocked; - - pReceptionData->SNR = p->SNR; - pReceptionData->BER = p->BER; - pReceptionData->BERErrorCount = p->BERErrorCount; - pReceptionData->InBandPwr = p->InBandPwr; - pReceptionData->ErrorTSPackets = p->ErrorTSPackets; -}; - - -static void smsdvb_update_isdbt_stats(struct RECEPTION_STATISTICS_S *pReceptionData, - struct SMSHOSTLIB_STATISTICS_ISDBT_ST *p) -{ - int i; - - if (sms_dbg & 2) { - printk(KERN_DEBUG "IsRfLocked = %d", p->IsRfLocked); - printk(KERN_DEBUG "IsDemodLocked = %d", p->IsDemodLocked); - printk(KERN_DEBUG "IsExternalLNAOn = %d", p->IsExternalLNAOn); - printk(KERN_DEBUG "SNR = %d", p->SNR); - printk(KERN_DEBUG "RSSI = %d", p->RSSI); - printk(KERN_DEBUG "InBandPwr = %d", p->InBandPwr); - printk(KERN_DEBUG "CarrierOffset = %d", p->CarrierOffset); - printk(KERN_DEBUG "Frequency = %d", p->Frequency); - printk(KERN_DEBUG "Bandwidth = %d", p->Bandwidth); - printk(KERN_DEBUG "TransmissionMode = %d", p->TransmissionMode); - printk(KERN_DEBUG "ModemState = %d", p->ModemState); - printk(KERN_DEBUG "GuardInterval = %d", p->GuardInterval); - printk(KERN_DEBUG "SystemType = %d", p->SystemType); - printk(KERN_DEBUG "PartialReception = %d", p->PartialReception); - printk(KERN_DEBUG "NumOfLayers = %d", p->NumOfLayers); - printk(KERN_DEBUG "SmsToHostTxErrors = %d", p->SmsToHostTxErrors); - - for (i = 0; i < 3; i++) { - printk(KERN_DEBUG "%d: CodeRate = %d", i, p->LayerInfo[i].CodeRate); - printk(KERN_DEBUG "%d: Constellation = %d", i, p->LayerInfo[i].Constellation); - printk(KERN_DEBUG "%d: BER = %d", i, p->LayerInfo[i].BER); - printk(KERN_DEBUG "%d: BERErrorCount = %d", i, p->LayerInfo[i].BERErrorCount); - printk(KERN_DEBUG "%d: BERBitCount = %d", i, p->LayerInfo[i].BERBitCount); - printk(KERN_DEBUG "%d: PreBER = %d", i, p->LayerInfo[i].PreBER); - printk(KERN_DEBUG "%d: TS_PER = %d", i, p->LayerInfo[i].TS_PER); - printk(KERN_DEBUG "%d: ErrorTSPackets = %d", i, p->LayerInfo[i].ErrorTSPackets); - printk(KERN_DEBUG "%d: TotalTSPackets = %d", i, p->LayerInfo[i].TotalTSPackets); - printk(KERN_DEBUG "%d: TILdepthI = %d", i, p->LayerInfo[i].TILdepthI); - printk(KERN_DEBUG "%d: NumberOfSegments = %d", i, p->LayerInfo[i].NumberOfSegments); - printk(KERN_DEBUG "%d: TMCCErrors = %d", i, p->LayerInfo[i].TMCCErrors); - } - } - - pReceptionData->IsDemodLocked = p->IsDemodLocked; - - pReceptionData->SNR = p->SNR; - pReceptionData->InBandPwr = p->InBandPwr; - - pReceptionData->ErrorTSPackets = 0; - pReceptionData->BER = 0; - pReceptionData->BERErrorCount = 0; - for (i = 0; i < 3; i++) { - pReceptionData->BER += p->LayerInfo[i].BER; - pReceptionData->BERErrorCount += p->LayerInfo[i].BERErrorCount; - pReceptionData->ErrorTSPackets += p->LayerInfo[i].ErrorTSPackets; - } -} - -static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb) -{ - struct smsdvb_client_t *client = (struct smsdvb_client_t *) context; - struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *) (((u8 *) cb->p) - + cb->offset); - u32 *pMsgData = (u32 *) phdr + 1; - /*u32 MsgDataLen = phdr->msgLength - sizeof(struct SmsMsgHdr_ST);*/ - bool is_status_update = false; - - smsendian_handle_rx_message((struct SmsMsgData_ST *) phdr); - - switch (phdr->msgType) { - case MSG_SMS_DVBT_BDA_DATA: - dvb_dmx_swfilter(&client->demux, (u8 *)(phdr + 1), - cb->size - sizeof(struct SmsMsgHdr_ST)); - break; - - case MSG_SMS_RF_TUNE_RES: - case MSG_SMS_ISDBT_TUNE_RES: - complete(&client->tune_done); - break; - - case MSG_SMS_SIGNAL_DETECTED_IND: - sms_info("MSG_SMS_SIGNAL_DETECTED_IND"); - client->sms_stat_dvb.TransmissionData.IsDemodLocked = true; - is_status_update = true; - break; - - case MSG_SMS_NO_SIGNAL_IND: - sms_info("MSG_SMS_NO_SIGNAL_IND"); - client->sms_stat_dvb.TransmissionData.IsDemodLocked = false; - is_status_update = true; - break; - - case MSG_SMS_TRANSMISSION_IND: { - sms_info("MSG_SMS_TRANSMISSION_IND"); - - pMsgData++; - memcpy(&client->sms_stat_dvb.TransmissionData, pMsgData, - sizeof(struct TRANSMISSION_STATISTICS_S)); - - /* Mo need to correct guard interval - * (as opposed to old statistics message). - */ - CORRECT_STAT_BANDWIDTH(client->sms_stat_dvb.TransmissionData); - CORRECT_STAT_TRANSMISSON_MODE( - client->sms_stat_dvb.TransmissionData); - is_status_update = true; - break; - } - case MSG_SMS_HO_PER_SLICES_IND: { - struct RECEPTION_STATISTICS_S *pReceptionData = - &client->sms_stat_dvb.ReceptionData; - struct SRVM_SIGNAL_STATUS_S SignalStatusData; - - /*sms_info("MSG_SMS_HO_PER_SLICES_IND");*/ - pMsgData++; - SignalStatusData.result = pMsgData[0]; - SignalStatusData.snr = pMsgData[1]; - SignalStatusData.inBandPower = (s32) pMsgData[2]; - SignalStatusData.tsPackets = pMsgData[3]; - SignalStatusData.etsPackets = pMsgData[4]; - SignalStatusData.constellation = pMsgData[5]; - SignalStatusData.hpCode = pMsgData[6]; - SignalStatusData.tpsSrvIndLP = pMsgData[7] & 0x03; - SignalStatusData.tpsSrvIndHP = pMsgData[8] & 0x03; - SignalStatusData.cellId = pMsgData[9] & 0xFFFF; - SignalStatusData.reason = pMsgData[10]; - SignalStatusData.requestId = pMsgData[11]; - pReceptionData->IsRfLocked = pMsgData[16]; - pReceptionData->IsDemodLocked = pMsgData[17]; - pReceptionData->ModemState = pMsgData[12]; - pReceptionData->SNR = pMsgData[1]; - pReceptionData->BER = pMsgData[13]; - pReceptionData->RSSI = pMsgData[14]; - CORRECT_STAT_RSSI(client->sms_stat_dvb.ReceptionData); - - pReceptionData->InBandPwr = (s32) pMsgData[2]; - pReceptionData->CarrierOffset = (s32) pMsgData[15]; - pReceptionData->TotalTSPackets = pMsgData[3]; - pReceptionData->ErrorTSPackets = pMsgData[4]; - - /* TS PER */ - if ((SignalStatusData.tsPackets + SignalStatusData.etsPackets) - > 0) { - pReceptionData->TS_PER = (SignalStatusData.etsPackets - * 100) / (SignalStatusData.tsPackets - + SignalStatusData.etsPackets); - } else { - pReceptionData->TS_PER = 0; - } - - pReceptionData->BERBitCount = pMsgData[18]; - pReceptionData->BERErrorCount = pMsgData[19]; - - pReceptionData->MRC_SNR = pMsgData[20]; - pReceptionData->MRC_InBandPwr = pMsgData[21]; - pReceptionData->MRC_RSSI = pMsgData[22]; - - is_status_update = true; - break; - } - case MSG_SMS_GET_STATISTICS_RES: { - union { - struct SMSHOSTLIB_STATISTICS_ISDBT_ST isdbt; - struct SmsMsgStatisticsInfo_ST dvb; - } *p = (void *) (phdr + 1); - struct RECEPTION_STATISTICS_S *pReceptionData = - &client->sms_stat_dvb.ReceptionData; - - sms_info("MSG_SMS_GET_STATISTICS_RES"); - - is_status_update = true; - - switch (smscore_get_device_mode(client->coredev)) { - case DEVICE_MODE_ISDBT: - case DEVICE_MODE_ISDBT_BDA: - smsdvb_update_isdbt_stats(pReceptionData, &p->isdbt); - break; - default: - smsdvb_update_dvb_stats(pReceptionData, &p->dvb.Stat); - } - if (!pReceptionData->IsDemodLocked) { - pReceptionData->SNR = 0; - pReceptionData->BER = 0; - pReceptionData->BERErrorCount = 0; - pReceptionData->InBandPwr = 0; - pReceptionData->ErrorTSPackets = 0; - } - - complete(&client->tune_done); - break; - } - default: - sms_info("Unhandled message %d", phdr->msgType); - - } - smscore_putbuffer(client->coredev, cb); - - if (is_status_update) { - if (client->sms_stat_dvb.ReceptionData.IsDemodLocked) { - client->fe_status = FE_HAS_SIGNAL | FE_HAS_CARRIER - | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; - sms_board_dvb3_event(client, DVB3_EVENT_FE_LOCK); - if (client->sms_stat_dvb.ReceptionData.ErrorTSPackets - == 0) - sms_board_dvb3_event(client, DVB3_EVENT_UNC_OK); - else - sms_board_dvb3_event(client, - DVB3_EVENT_UNC_ERR); - - } else { - if (client->sms_stat_dvb.ReceptionData.IsRfLocked) - client->fe_status = FE_HAS_SIGNAL | FE_HAS_CARRIER; - else - client->fe_status = 0; - sms_board_dvb3_event(client, DVB3_EVENT_FE_UNLOCK); - } - } - - return 0; -} - -static void smsdvb_unregister_client(struct smsdvb_client_t *client) -{ - /* must be called under clientslock */ - - list_del(&client->entry); - - smscore_unregister_client(client->smsclient); - dvb_unregister_frontend(&client->frontend); - dvb_dmxdev_release(&client->dmxdev); - dvb_dmx_release(&client->demux); - dvb_unregister_adapter(&client->adapter); - kfree(client); -} - -static void smsdvb_onremove(void *context) -{ - kmutex_lock(&g_smsdvb_clientslock); - - smsdvb_unregister_client((struct smsdvb_client_t *) context); - - kmutex_unlock(&g_smsdvb_clientslock); -} - -static int smsdvb_start_feed(struct dvb_demux_feed *feed) -{ - struct smsdvb_client_t *client = - container_of(feed->demux, struct smsdvb_client_t, demux); - struct SmsMsgData_ST PidMsg; - - sms_debug("add pid %d(%x)", - feed->pid, feed->pid); - - PidMsg.xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - PidMsg.xMsgHeader.msgDstId = HIF_TASK; - PidMsg.xMsgHeader.msgFlags = 0; - PidMsg.xMsgHeader.msgType = MSG_SMS_ADD_PID_FILTER_REQ; - PidMsg.xMsgHeader.msgLength = sizeof(PidMsg); - PidMsg.msgData[0] = feed->pid; - - smsendian_handle_tx_message((struct SmsMsgHdr_ST *)&PidMsg); - return smsclient_sendrequest(client->smsclient, - &PidMsg, sizeof(PidMsg)); -} - -static int smsdvb_stop_feed(struct dvb_demux_feed *feed) -{ - struct smsdvb_client_t *client = - container_of(feed->demux, struct smsdvb_client_t, demux); - struct SmsMsgData_ST PidMsg; - - sms_debug("remove pid %d(%x)", - feed->pid, feed->pid); - - PidMsg.xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - PidMsg.xMsgHeader.msgDstId = HIF_TASK; - PidMsg.xMsgHeader.msgFlags = 0; - PidMsg.xMsgHeader.msgType = MSG_SMS_REMOVE_PID_FILTER_REQ; - PidMsg.xMsgHeader.msgLength = sizeof(PidMsg); - PidMsg.msgData[0] = feed->pid; - - smsendian_handle_tx_message((struct SmsMsgHdr_ST *)&PidMsg); - return smsclient_sendrequest(client->smsclient, - &PidMsg, sizeof(PidMsg)); -} - -static int smsdvb_sendrequest_and_wait(struct smsdvb_client_t *client, - void *buffer, size_t size, - struct completion *completion) -{ - int rc; - - smsendian_handle_tx_message((struct SmsMsgHdr_ST *)buffer); - rc = smsclient_sendrequest(client->smsclient, buffer, size); - if (rc < 0) - return rc; - - return wait_for_completion_timeout(completion, - msecs_to_jiffies(2000)) ? - 0 : -ETIME; -} - -static int smsdvb_send_statistics_request(struct smsdvb_client_t *client) -{ - int rc; - struct SmsMsgHdr_ST Msg = { MSG_SMS_GET_STATISTICS_REQ, - DVBT_BDA_CONTROL_MSG_ID, - HIF_TASK, - sizeof(struct SmsMsgHdr_ST), 0 }; - - rc = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg), - &client->tune_done); - - return rc; -} - -static inline int led_feedback(struct smsdvb_client_t *client) -{ - if (client->fe_status & FE_HAS_LOCK) - return sms_board_led_feedback(client->coredev, - (client->sms_stat_dvb.ReceptionData.BER - == 0) ? SMS_LED_HI : SMS_LED_LO); - else - return sms_board_led_feedback(client->coredev, SMS_LED_OFF); -} - -static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat) -{ - int rc; - struct smsdvb_client_t *client; - client = container_of(fe, struct smsdvb_client_t, frontend); - - rc = smsdvb_send_statistics_request(client); - - *stat = client->fe_status; - - led_feedback(client); - - return rc; -} - -static int smsdvb_read_ber(struct dvb_frontend *fe, u32 *ber) -{ - int rc; - struct smsdvb_client_t *client; - client = container_of(fe, struct smsdvb_client_t, frontend); - - rc = smsdvb_send_statistics_request(client); - - *ber = client->sms_stat_dvb.ReceptionData.BER; - - led_feedback(client); - - return rc; -} - -static int smsdvb_read_signal_strength(struct dvb_frontend *fe, u16 *strength) -{ - int rc; - - struct smsdvb_client_t *client; - client = container_of(fe, struct smsdvb_client_t, frontend); - - rc = smsdvb_send_statistics_request(client); - - if (client->sms_stat_dvb.ReceptionData.InBandPwr < -95) - *strength = 0; - else if (client->sms_stat_dvb.ReceptionData.InBandPwr > -29) - *strength = 100; - else - *strength = - (client->sms_stat_dvb.ReceptionData.InBandPwr - + 95) * 3 / 2; - - led_feedback(client); - - return rc; -} - -static int smsdvb_read_snr(struct dvb_frontend *fe, u16 *snr) -{ - int rc; - struct smsdvb_client_t *client; - client = container_of(fe, struct smsdvb_client_t, frontend); - - rc = smsdvb_send_statistics_request(client); - - *snr = client->sms_stat_dvb.ReceptionData.SNR; - - led_feedback(client); - - return rc; -} - -static int smsdvb_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) -{ - int rc; - struct smsdvb_client_t *client; - client = container_of(fe, struct smsdvb_client_t, frontend); - - rc = smsdvb_send_statistics_request(client); - - *ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets; - - led_feedback(client); - - return rc; -} - -static int smsdvb_get_tune_settings(struct dvb_frontend *fe, - struct dvb_frontend_tune_settings *tune) -{ - sms_debug(""); - - tune->min_delay_ms = 400; - tune->step_size = 250000; - tune->max_drift = 0; - return 0; -} - -static int smsdvb_dvbt_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct smsdvb_client_t *client = - container_of(fe, struct smsdvb_client_t, frontend); - - struct { - struct SmsMsgHdr_ST Msg; - u32 Data[3]; - } Msg; - - int ret; - - client->fe_status = FE_HAS_SIGNAL; - client->event_fe_state = -1; - client->event_unc_state = -1; - fe->dtv_property_cache.delivery_system = SYS_DVBT; - - Msg.Msg.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - Msg.Msg.msgDstId = HIF_TASK; - Msg.Msg.msgFlags = 0; - Msg.Msg.msgType = MSG_SMS_RF_TUNE_REQ; - Msg.Msg.msgLength = sizeof(Msg); - Msg.Data[0] = c->frequency; - Msg.Data[2] = 12000000; - - sms_info("%s: freq %d band %d", __func__, c->frequency, - c->bandwidth_hz); - - switch (c->bandwidth_hz / 1000000) { - case 8: - Msg.Data[1] = BW_8_MHZ; - break; - case 7: - Msg.Data[1] = BW_7_MHZ; - break; - case 6: - Msg.Data[1] = BW_6_MHZ; - break; - case 0: - return -EOPNOTSUPP; - default: - return -EINVAL; - } - /* Disable LNA, if any. An error is returned if no LNA is present */ - ret = sms_board_lna_control(client->coredev, 0); - if (ret == 0) { - fe_status_t status; - - /* tune with LNA off at first */ - ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg), - &client->tune_done); - - smsdvb_read_status(fe, &status); - - if (status & FE_HAS_LOCK) - return ret; - - /* previous tune didn't lock - enable LNA and tune again */ - sms_board_lna_control(client->coredev, 1); - } - - return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg), - &client->tune_done); -} - -static int smsdvb_isdbt_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - struct smsdvb_client_t *client = - container_of(fe, struct smsdvb_client_t, frontend); - - struct { - struct SmsMsgHdr_ST Msg; - u32 Data[4]; - } Msg; - - fe->dtv_property_cache.delivery_system = SYS_ISDBT; - - Msg.Msg.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; - Msg.Msg.msgDstId = HIF_TASK; - Msg.Msg.msgFlags = 0; - Msg.Msg.msgType = MSG_SMS_ISDBT_TUNE_REQ; - Msg.Msg.msgLength = sizeof(Msg); - - if (c->isdbt_sb_segment_idx == -1) - c->isdbt_sb_segment_idx = 0; - - switch (c->isdbt_sb_segment_count) { - case 3: - Msg.Data[1] = BW_ISDBT_3SEG; - break; - case 1: - Msg.Data[1] = BW_ISDBT_1SEG; - break; - case 0: /* AUTO */ - switch (c->bandwidth_hz / 1000000) { - case 8: - case 7: - c->isdbt_sb_segment_count = 3; - Msg.Data[1] = BW_ISDBT_3SEG; - break; - case 6: - c->isdbt_sb_segment_count = 1; - Msg.Data[1] = BW_ISDBT_1SEG; - break; - default: /* Assumes 6 MHZ bw */ - c->isdbt_sb_segment_count = 1; - c->bandwidth_hz = 6000; - Msg.Data[1] = BW_ISDBT_1SEG; - break; - } - break; - default: - sms_info("Segment count %d not supported", c->isdbt_sb_segment_count); - return -EINVAL; - } - - Msg.Data[0] = c->frequency; - Msg.Data[2] = 12000000; - Msg.Data[3] = c->isdbt_sb_segment_idx; - - sms_info("%s: freq %d segwidth %d segindex %d\n", __func__, - c->frequency, c->isdbt_sb_segment_count, - c->isdbt_sb_segment_idx); - - return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg), - &client->tune_done); -} - -static int smsdvb_set_frontend(struct dvb_frontend *fe) -{ - struct smsdvb_client_t *client = - container_of(fe, struct smsdvb_client_t, frontend); - struct smscore_device_t *coredev = client->coredev; - - switch (smscore_get_device_mode(coredev)) { - case DEVICE_MODE_DVBT: - case DEVICE_MODE_DVBT_BDA: - return smsdvb_dvbt_set_frontend(fe); - case DEVICE_MODE_ISDBT: - case DEVICE_MODE_ISDBT_BDA: - return smsdvb_isdbt_set_frontend(fe); - default: - return -EINVAL; - } -} - -static int smsdvb_get_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *fep = &fe->dtv_property_cache; - struct smsdvb_client_t *client = - container_of(fe, struct smsdvb_client_t, frontend); - struct smscore_device_t *coredev = client->coredev; - struct TRANSMISSION_STATISTICS_S *td = - &client->sms_stat_dvb.TransmissionData; - - switch (smscore_get_device_mode(coredev)) { - case DEVICE_MODE_DVBT: - case DEVICE_MODE_DVBT_BDA: - fep->frequency = td->Frequency; - - switch (td->Bandwidth) { - case 6: - fep->bandwidth_hz = 6000000; - break; - case 7: - fep->bandwidth_hz = 7000000; - break; - case 8: - fep->bandwidth_hz = 8000000; - break; - } - - switch (td->TransmissionMode) { - case 2: - fep->transmission_mode = TRANSMISSION_MODE_2K; - break; - case 8: - fep->transmission_mode = TRANSMISSION_MODE_8K; - } - - switch (td->GuardInterval) { - case 0: - fep->guard_interval = GUARD_INTERVAL_1_32; - break; - case 1: - fep->guard_interval = GUARD_INTERVAL_1_16; - break; - case 2: - fep->guard_interval = GUARD_INTERVAL_1_8; - break; - case 3: - fep->guard_interval = GUARD_INTERVAL_1_4; - break; - } - - switch (td->CodeRate) { - case 0: - fep->code_rate_HP = FEC_1_2; - break; - case 1: - fep->code_rate_HP = FEC_2_3; - break; - case 2: - fep->code_rate_HP = FEC_3_4; - break; - case 3: - fep->code_rate_HP = FEC_5_6; - break; - case 4: - fep->code_rate_HP = FEC_7_8; - break; - } - - switch (td->LPCodeRate) { - case 0: - fep->code_rate_LP = FEC_1_2; - break; - case 1: - fep->code_rate_LP = FEC_2_3; - break; - case 2: - fep->code_rate_LP = FEC_3_4; - break; - case 3: - fep->code_rate_LP = FEC_5_6; - break; - case 4: - fep->code_rate_LP = FEC_7_8; - break; - } - - switch (td->Constellation) { - case 0: - fep->modulation = QPSK; - break; - case 1: - fep->modulation = QAM_16; - break; - case 2: - fep->modulation = QAM_64; - break; - } - - switch (td->Hierarchy) { - case 0: - fep->hierarchy = HIERARCHY_NONE; - break; - case 1: - fep->hierarchy = HIERARCHY_1; - break; - case 2: - fep->hierarchy = HIERARCHY_2; - break; - case 3: - fep->hierarchy = HIERARCHY_4; - break; - } - - fep->inversion = INVERSION_AUTO; - break; - case DEVICE_MODE_ISDBT: - case DEVICE_MODE_ISDBT_BDA: - fep->frequency = td->Frequency; - fep->bandwidth_hz = 6000000; - /* todo: retrive the other parameters */ - break; - default: - return -EINVAL; - } - - return 0; -} - -static int smsdvb_init(struct dvb_frontend *fe) -{ - struct smsdvb_client_t *client = - container_of(fe, struct smsdvb_client_t, frontend); - - sms_board_power(client->coredev, 1); - - sms_board_dvb3_event(client, DVB3_EVENT_INIT); - return 0; -} - -static int smsdvb_sleep(struct dvb_frontend *fe) -{ - struct smsdvb_client_t *client = - container_of(fe, struct smsdvb_client_t, frontend); - - sms_board_led_feedback(client->coredev, SMS_LED_OFF); - sms_board_power(client->coredev, 0); - - sms_board_dvb3_event(client, DVB3_EVENT_SLEEP); - - return 0; -} - -static void smsdvb_release(struct dvb_frontend *fe) -{ - /* do nothing */ -} - -static struct dvb_frontend_ops smsdvb_fe_ops = { - .info = { - .name = "Siano Mobile Digital MDTV Receiver", - .frequency_min = 44250000, - .frequency_max = 867250000, - .frequency_stepsize = 250000, - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | - FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | - FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_RECOVER | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = smsdvb_release, - - .set_frontend = smsdvb_set_frontend, - .get_frontend = smsdvb_get_frontend, - .get_tune_settings = smsdvb_get_tune_settings, - - .read_status = smsdvb_read_status, - .read_ber = smsdvb_read_ber, - .read_signal_strength = smsdvb_read_signal_strength, - .read_snr = smsdvb_read_snr, - .read_ucblocks = smsdvb_read_ucblocks, - - .init = smsdvb_init, - .sleep = smsdvb_sleep, -}; - -static int smsdvb_hotplug(struct smscore_device_t *coredev, - struct device *device, int arrival) -{ - struct smsclient_params_t params; - struct smsdvb_client_t *client; - int rc; - - /* device removal handled by onremove callback */ - if (!arrival) - return 0; - client = kzalloc(sizeof(struct smsdvb_client_t), GFP_KERNEL); - if (!client) { - sms_err("kmalloc() failed"); - return -ENOMEM; - } - - /* register dvb adapter */ - rc = dvb_register_adapter(&client->adapter, - sms_get_board( - smscore_get_board_id(coredev))->name, - THIS_MODULE, device, adapter_nr); - if (rc < 0) { - sms_err("dvb_register_adapter() failed %d", rc); - goto adapter_error; - } - - /* init dvb demux */ - client->demux.dmx.capabilities = DMX_TS_FILTERING; - client->demux.filternum = 32; /* todo: nova ??? */ - client->demux.feednum = 32; - client->demux.start_feed = smsdvb_start_feed; - client->demux.stop_feed = smsdvb_stop_feed; - - rc = dvb_dmx_init(&client->demux); - if (rc < 0) { - sms_err("dvb_dmx_init failed %d", rc); - goto dvbdmx_error; - } - - /* init dmxdev */ - client->dmxdev.filternum = 32; - client->dmxdev.demux = &client->demux.dmx; - client->dmxdev.capabilities = 0; - - rc = dvb_dmxdev_init(&client->dmxdev, &client->adapter); - if (rc < 0) { - sms_err("dvb_dmxdev_init failed %d", rc); - goto dmxdev_error; - } - - /* init and register frontend */ - memcpy(&client->frontend.ops, &smsdvb_fe_ops, - sizeof(struct dvb_frontend_ops)); - - switch (smscore_get_device_mode(coredev)) { - case DEVICE_MODE_DVBT: - case DEVICE_MODE_DVBT_BDA: - client->frontend.ops.delsys[0] = SYS_DVBT; - break; - case DEVICE_MODE_ISDBT: - case DEVICE_MODE_ISDBT_BDA: - client->frontend.ops.delsys[0] = SYS_ISDBT; - break; - } - - rc = dvb_register_frontend(&client->adapter, &client->frontend); - if (rc < 0) { - sms_err("frontend registration failed %d", rc); - goto frontend_error; - } - - params.initial_id = 1; - params.data_type = MSG_SMS_DVBT_BDA_DATA; - params.onresponse_handler = smsdvb_onresponse; - params.onremove_handler = smsdvb_onremove; - params.context = client; - - rc = smscore_register_client(coredev, ¶ms, &client->smsclient); - if (rc < 0) { - sms_err("smscore_register_client() failed %d", rc); - goto client_error; - } - - client->coredev = coredev; - - init_completion(&client->tune_done); - - kmutex_lock(&g_smsdvb_clientslock); - - list_add(&client->entry, &g_smsdvb_clients); - - kmutex_unlock(&g_smsdvb_clientslock); - - client->event_fe_state = -1; - client->event_unc_state = -1; - sms_board_dvb3_event(client, DVB3_EVENT_HOTPLUG); - - sms_info("success"); - sms_board_setup(coredev); - - return 0; - -client_error: - dvb_unregister_frontend(&client->frontend); - -frontend_error: - dvb_dmxdev_release(&client->dmxdev); - -dmxdev_error: - dvb_dmx_release(&client->demux); - -dvbdmx_error: - dvb_unregister_adapter(&client->adapter); - -adapter_error: - kfree(client); - return rc; -} - -static int __init smsdvb_module_init(void) -{ - int rc; - - INIT_LIST_HEAD(&g_smsdvb_clients); - kmutex_init(&g_smsdvb_clientslock); - - rc = smscore_register_hotplug(smsdvb_hotplug); - - sms_debug(""); - - return rc; -} - -static void __exit smsdvb_module_exit(void) -{ - smscore_unregister_hotplug(smsdvb_hotplug); - - kmutex_lock(&g_smsdvb_clientslock); - - while (!list_empty(&g_smsdvb_clients)) - smsdvb_unregister_client( - (struct smsdvb_client_t *) g_smsdvb_clients.next); - - kmutex_unlock(&g_smsdvb_clientslock); -} - -module_init(smsdvb_module_init); -module_exit(smsdvb_module_exit); - -MODULE_DESCRIPTION("SMS DVB subsystem adaptation module"); -MODULE_AUTHOR("Siano Mobile Silicon, Inc. (uris@siano-ms.com)"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/siano/smsendian.c b/drivers/media/dvb/siano/smsendian.c deleted file mode 100644 index e2657c2f0109..000000000000 --- a/drivers/media/dvb/siano/smsendian.c +++ /dev/null @@ -1,103 +0,0 @@ -/**************************************************************** - - Siano Mobile Silicon, Inc. - MDTV receiver kernel modules. - Copyright (C) 2006-2009, Uri Shkolnik - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - - ****************************************************************/ - -#include <linux/export.h> -#include <asm/byteorder.h> - -#include "smsendian.h" -#include "smscoreapi.h" - -void smsendian_handle_tx_message(void *buffer) -{ -#ifdef __BIG_ENDIAN - struct SmsMsgData_ST *msg = (struct SmsMsgData_ST *)buffer; - int i; - int msgWords; - - switch (msg->xMsgHeader.msgType) { - case MSG_SMS_DATA_DOWNLOAD_REQ: - { - msg->msgData[0] = le32_to_cpu(msg->msgData[0]); - break; - } - - default: - msgWords = (msg->xMsgHeader.msgLength - - sizeof(struct SmsMsgHdr_ST))/4; - - for (i = 0; i < msgWords; i++) - msg->msgData[i] = le32_to_cpu(msg->msgData[i]); - - break; - } -#endif /* __BIG_ENDIAN */ -} -EXPORT_SYMBOL_GPL(smsendian_handle_tx_message); - -void smsendian_handle_rx_message(void *buffer) -{ -#ifdef __BIG_ENDIAN - struct SmsMsgData_ST *msg = (struct SmsMsgData_ST *)buffer; - int i; - int msgWords; - - switch (msg->xMsgHeader.msgType) { - case MSG_SMS_GET_VERSION_EX_RES: - { - struct SmsVersionRes_ST *ver = - (struct SmsVersionRes_ST *) msg; - ver->ChipModel = le16_to_cpu(ver->ChipModel); - break; - } - - case MSG_SMS_DVBT_BDA_DATA: - case MSG_SMS_DAB_CHANNEL: - case MSG_SMS_DATA_MSG: - { - break; - } - - default: - { - msgWords = (msg->xMsgHeader.msgLength - - sizeof(struct SmsMsgHdr_ST))/4; - - for (i = 0; i < msgWords; i++) - msg->msgData[i] = le32_to_cpu(msg->msgData[i]); - - break; - } - } -#endif /* __BIG_ENDIAN */ -} -EXPORT_SYMBOL_GPL(smsendian_handle_rx_message); - -void smsendian_handle_message_header(void *msg) -{ -#ifdef __BIG_ENDIAN - struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)msg; - - phdr->msgType = le16_to_cpu(phdr->msgType); - phdr->msgLength = le16_to_cpu(phdr->msgLength); - phdr->msgFlags = le16_to_cpu(phdr->msgFlags); -#endif /* __BIG_ENDIAN */ -} -EXPORT_SYMBOL_GPL(smsendian_handle_message_header); diff --git a/drivers/media/dvb/siano/smsendian.h b/drivers/media/dvb/siano/smsendian.h deleted file mode 100644 index 1624d6fd367b..000000000000 --- a/drivers/media/dvb/siano/smsendian.h +++ /dev/null @@ -1,32 +0,0 @@ -/**************************************************************** - -Siano Mobile Silicon, Inc. -MDTV receiver kernel modules. -Copyright (C) 2006-2009, Uri Shkolnik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - - This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -****************************************************************/ - -#ifndef __SMS_ENDIAN_H__ -#define __SMS_ENDIAN_H__ - -#include <asm/byteorder.h> - -extern void smsendian_handle_tx_message(void *buffer); -extern void smsendian_handle_rx_message(void *buffer); -extern void smsendian_handle_message_header(void *msg); - -#endif /* __SMS_ENDIAN_H__ */ - diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c deleted file mode 100644 index 37bc5c4b8ad8..000000000000 --- a/drivers/media/dvb/siano/smsir.c +++ /dev/null @@ -1,114 +0,0 @@ -/**************************************************************** - - Siano Mobile Silicon, Inc. - MDTV receiver kernel modules. - Copyright (C) 2006-2009, Uri Shkolnik - - Copyright (c) 2010 - Mauro Carvalho Chehab - - Ported the driver to use rc-core - - IR raw event decoding is now done at rc-core - - Code almost re-written - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - - ****************************************************************/ - - -#include <linux/types.h> -#include <linux/input.h> - -#include "smscoreapi.h" -#include "smsir.h" -#include "sms-cards.h" - -#define MODULE_NAME "smsmdtv" - -void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len) -{ - int i; - const s32 *samples = (const void *)buf; - - for (i = 0; i < len >> 2; i++) { - DEFINE_IR_RAW_EVENT(ev); - - ev.duration = abs(samples[i]) * 1000; /* Convert to ns */ - ev.pulse = (samples[i] > 0) ? false : true; - - ir_raw_event_store(coredev->ir.dev, &ev); - } - ir_raw_event_handle(coredev->ir.dev); -} - -int sms_ir_init(struct smscore_device_t *coredev) -{ - int err; - int board_id = smscore_get_board_id(coredev); - struct rc_dev *dev; - - sms_log("Allocating rc device"); - dev = rc_allocate_device(); - if (!dev) { - sms_err("Not enough memory"); - return -ENOMEM; - } - - coredev->ir.controller = 0; /* Todo: vega/nova SPI number */ - coredev->ir.timeout = IR_DEFAULT_TIMEOUT; - sms_log("IR port %d, timeout %d ms", - coredev->ir.controller, coredev->ir.timeout); - - snprintf(coredev->ir.name, sizeof(coredev->ir.name), - "SMS IR (%s)", sms_get_board(board_id)->name); - - strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys)); - strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys)); - - dev->input_name = coredev->ir.name; - dev->input_phys = coredev->ir.phys; - dev->dev.parent = coredev->device; - -#if 0 - /* TODO: properly initialize the parameters bellow */ - dev->input_id.bustype = BUS_USB; - dev->input_id.version = 1; - dev->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); - dev->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct); -#endif - - dev->priv = coredev; - dev->driver_type = RC_DRIVER_IR_RAW; - dev->allowed_protos = RC_TYPE_ALL; - dev->map_name = sms_get_board(board_id)->rc_codes; - dev->driver_name = MODULE_NAME; - - sms_log("Input device (IR) %s is set for key events", dev->input_name); - - err = rc_register_device(dev); - if (err < 0) { - sms_err("Failed to register device"); - rc_free_device(dev); - return err; - } - - coredev->ir.dev = dev; - return 0; -} - -void sms_ir_exit(struct smscore_device_t *coredev) -{ - if (coredev->ir.dev) - rc_unregister_device(coredev->ir.dev); - - sms_log(""); -} diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h deleted file mode 100644 index ae92b3a8587e..000000000000 --- a/drivers/media/dvb/siano/smsir.h +++ /dev/null @@ -1,55 +0,0 @@ -/**************************************************************** - -Siano Mobile Silicon, Inc. -MDTV receiver kernel modules. -Copyright (C) 2006-2009, Uri Shkolnik - - Copyright (c) 2010 - Mauro Carvalho Chehab - - Ported the driver to use rc-core - - IR raw event decoding is now done at rc-core - - Code almost re-written - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - - This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -****************************************************************/ - -#ifndef __SMS_IR_H__ -#define __SMS_IR_H__ - -#include <linux/input.h> -#include <media/rc-core.h> - -#define IR_DEFAULT_TIMEOUT 100 - -struct smscore_device_t; - -struct ir_t { - struct rc_dev *dev; - char name[40]; - char phys[32]; - - char *rc_codes; - u64 protocol; - - u32 timeout; - u32 controller; -}; - -int sms_ir_init(struct smscore_device_t *coredev); -void sms_ir_exit(struct smscore_device_t *coredev); -void sms_ir_event(struct smscore_device_t *coredev, - const char *buf, int len); - -#endif /* __SMS_IR_H__ */ - diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c deleted file mode 100644 index d6f3f100699a..000000000000 --- a/drivers/media/dvb/siano/smssdio.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * smssdio.c - Siano 1xxx SDIO interface driver - * - * Copyright 2008 Pierre Ossman - * - * Based on code by Siano Mobile Silicon, Inc., - * Copyright (C) 2006-2008, Uri Shkolnik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * - * This hardware is a bit odd in that all transfers should be done - * to/from the SMSSDIO_DATA register, yet the "increase address" bit - * always needs to be set. - * - * Also, buffers from the card are always aligned to 128 byte - * boundaries. - */ - -/* - * General cleanup notes: - * - * - only typedefs should be name *_t - * - * - use ERR_PTR and friends for smscore_register_device() - * - * - smscore_getbuffer should zero fields - * - * Fix stop command - */ - -#include <linux/moduleparam.h> -#include <linux/slab.h> -#include <linux/firmware.h> -#include <linux/delay.h> -#include <linux/mmc/card.h> -#include <linux/mmc/sdio_func.h> -#include <linux/mmc/sdio_ids.h> -#include <linux/module.h> - -#include "smscoreapi.h" -#include "sms-cards.h" - -/* Registers */ - -#define SMSSDIO_DATA 0x00 -#define SMSSDIO_INT 0x04 -#define SMSSDIO_BLOCK_SIZE 128 - -static const struct sdio_device_id smssdio_ids[] __devinitconst = { - {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR), - .driver_data = SMS1XXX_BOARD_SIANO_STELLAR}, - {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0), - .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A}, - {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0), - .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B}, - {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0), - .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, - {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE), - .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, - { /* end: all zeroes */ }, -}; - -MODULE_DEVICE_TABLE(sdio, smssdio_ids); - -struct smssdio_device { - struct sdio_func *func; - - struct smscore_device_t *coredev; - - struct smscore_buffer_t *split_cb; -}; - -/*******************************************************************/ -/* Siano core callbacks */ -/*******************************************************************/ - -static int smssdio_sendrequest(void *context, void *buffer, size_t size) -{ - int ret = 0; - struct smssdio_device *smsdev; - - smsdev = context; - - sdio_claim_host(smsdev->func); - - while (size >= smsdev->func->cur_blksize) { - ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, - buffer, smsdev->func->cur_blksize); - if (ret) - goto out; - - buffer += smsdev->func->cur_blksize; - size -= smsdev->func->cur_blksize; - } - - if (size) { - ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, - buffer, size); - } - -out: - sdio_release_host(smsdev->func); - - return ret; -} - -/*******************************************************************/ -/* SDIO callbacks */ -/*******************************************************************/ - -static void smssdio_interrupt(struct sdio_func *func) -{ - int ret; - - struct smssdio_device *smsdev; - struct smscore_buffer_t *cb; - struct SmsMsgHdr_ST *hdr; - size_t size; - - smsdev = sdio_get_drvdata(func); - - /* - * The interrupt register has no defined meaning. It is just - * a way of turning of the level triggered interrupt. - */ - (void)sdio_readb(func, SMSSDIO_INT, &ret); - if (ret) { - sms_err("Unable to read interrupt register!\n"); - return; - } - - if (smsdev->split_cb == NULL) { - cb = smscore_getbuffer(smsdev->coredev); - if (!cb) { - sms_err("Unable to allocate data buffer!\n"); - return; - } - - ret = sdio_memcpy_fromio(smsdev->func, - cb->p, - SMSSDIO_DATA, - SMSSDIO_BLOCK_SIZE); - if (ret) { - sms_err("Error %d reading initial block!\n", ret); - return; - } - - hdr = cb->p; - - if (hdr->msgFlags & MSG_HDR_FLAG_SPLIT_MSG) { - smsdev->split_cb = cb; - return; - } - - if (hdr->msgLength > smsdev->func->cur_blksize) - size = hdr->msgLength - smsdev->func->cur_blksize; - else - size = 0; - } else { - cb = smsdev->split_cb; - hdr = cb->p; - - size = hdr->msgLength - sizeof(struct SmsMsgHdr_ST); - - smsdev->split_cb = NULL; - } - - if (size) { - void *buffer; - - buffer = cb->p + (hdr->msgLength - size); - size = ALIGN(size, SMSSDIO_BLOCK_SIZE); - - BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE); - - /* - * First attempt to transfer all of it in one go... - */ - ret = sdio_memcpy_fromio(smsdev->func, - buffer, - SMSSDIO_DATA, - size); - if (ret && ret != -EINVAL) { - smscore_putbuffer(smsdev->coredev, cb); - sms_err("Error %d reading data from card!\n", ret); - return; - } - - /* - * ..then fall back to one block at a time if that is - * not possible... - * - * (we have to do this manually because of the - * problem with the "increase address" bit) - */ - if (ret == -EINVAL) { - while (size) { - ret = sdio_memcpy_fromio(smsdev->func, - buffer, SMSSDIO_DATA, - smsdev->func->cur_blksize); - if (ret) { - smscore_putbuffer(smsdev->coredev, cb); - sms_err("Error %d reading " - "data from card!\n", ret); - return; - } - - buffer += smsdev->func->cur_blksize; - if (size > smsdev->func->cur_blksize) - size -= smsdev->func->cur_blksize; - else - size = 0; - } - } - } - - cb->size = hdr->msgLength; - cb->offset = 0; - - smscore_onresponse(smsdev->coredev, cb); -} - -static int __devinit smssdio_probe(struct sdio_func *func, - const struct sdio_device_id *id) -{ - int ret; - - int board_id; - struct smssdio_device *smsdev; - struct smsdevice_params_t params; - - board_id = id->driver_data; - - smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL); - if (!smsdev) - return -ENOMEM; - - smsdev->func = func; - - memset(¶ms, 0, sizeof(struct smsdevice_params_t)); - - params.device = &func->dev; - params.buffer_size = 0x5000; /* ?? */ - params.num_buffers = 22; /* ?? */ - params.context = smsdev; - - snprintf(params.devpath, sizeof(params.devpath), - "sdio\\%s", sdio_func_id(func)); - - params.sendrequest_handler = smssdio_sendrequest; - - params.device_type = sms_get_board(board_id)->type; - - if (params.device_type != SMS_STELLAR) - params.flags |= SMS_DEVICE_FAMILY2; - else { - /* - * FIXME: Stellar needs special handling... - */ - ret = -ENODEV; - goto free; - } - - ret = smscore_register_device(¶ms, &smsdev->coredev); - if (ret < 0) - goto free; - - smscore_set_board_id(smsdev->coredev, board_id); - - sdio_claim_host(func); - - ret = sdio_enable_func(func); - if (ret) - goto release; - - ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE); - if (ret) - goto disable; - - ret = sdio_claim_irq(func, smssdio_interrupt); - if (ret) - goto disable; - - sdio_set_drvdata(func, smsdev); - - sdio_release_host(func); - - ret = smscore_start_device(smsdev->coredev); - if (ret < 0) - goto reclaim; - - return 0; - -reclaim: - sdio_claim_host(func); - sdio_release_irq(func); -disable: - sdio_disable_func(func); -release: - sdio_release_host(func); - smscore_unregister_device(smsdev->coredev); -free: - kfree(smsdev); - - return ret; -} - -static void smssdio_remove(struct sdio_func *func) -{ - struct smssdio_device *smsdev; - - smsdev = sdio_get_drvdata(func); - - /* FIXME: racy! */ - if (smsdev->split_cb) - smscore_putbuffer(smsdev->coredev, smsdev->split_cb); - - smscore_unregister_device(smsdev->coredev); - - sdio_claim_host(func); - sdio_release_irq(func); - sdio_disable_func(func); - sdio_release_host(func); - - kfree(smsdev); -} - -static struct sdio_driver smssdio_driver = { - .name = "smssdio", - .id_table = smssdio_ids, - .probe = smssdio_probe, - .remove = smssdio_remove, -}; - -/*******************************************************************/ -/* Module functions */ -/*******************************************************************/ - -static int __init smssdio_module_init(void) -{ - int ret = 0; - - printk(KERN_INFO "smssdio: Siano SMS1xxx SDIO driver\n"); - printk(KERN_INFO "smssdio: Copyright Pierre Ossman\n"); - - ret = sdio_register_driver(&smssdio_driver); - - return ret; -} - -static void __exit smssdio_module_exit(void) -{ - sdio_unregister_driver(&smssdio_driver); -} - -module_init(smssdio_module_init); -module_exit(smssdio_module_exit); - -MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver"); -MODULE_AUTHOR("Pierre Ossman"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c deleted file mode 100644 index 664e460f247b..000000000000 --- a/drivers/media/dvb/siano/smsusb.c +++ /dev/null @@ -1,568 +0,0 @@ -/**************************************************************** - -Siano Mobile Silicon, Inc. -MDTV receiver kernel modules. -Copyright (C) 2005-2009, Uri Shkolnik, Anatoly Greenblat - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - - This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. - -****************************************************************/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/usb.h> -#include <linux/firmware.h> -#include <linux/slab.h> -#include <linux/module.h> - -#include "smscoreapi.h" -#include "sms-cards.h" -#include "smsendian.h" - -static int sms_dbg; -module_param_named(debug, sms_dbg, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))"); - -#define USB1_BUFFER_SIZE 0x1000 -#define USB2_BUFFER_SIZE 0x4000 - -#define MAX_BUFFERS 50 -#define MAX_URBS 10 - -struct smsusb_device_t; - -struct smsusb_urb_t { - struct smscore_buffer_t *cb; - struct smsusb_device_t *dev; - - struct urb urb; -}; - -struct smsusb_device_t { - struct usb_device *udev; - struct smscore_device_t *coredev; - - struct smsusb_urb_t surbs[MAX_URBS]; - - int response_alignment; - int buffer_size; -}; - -static int smsusb_submit_urb(struct smsusb_device_t *dev, - struct smsusb_urb_t *surb); - -static void smsusb_onresponse(struct urb *urb) -{ - struct smsusb_urb_t *surb = (struct smsusb_urb_t *) urb->context; - struct smsusb_device_t *dev = surb->dev; - - if (urb->status == -ESHUTDOWN) { - sms_err("error, urb status %d (-ESHUTDOWN), %d bytes", - urb->status, urb->actual_length); - return; - } - - if ((urb->actual_length > 0) && (urb->status == 0)) { - struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)surb->cb->p; - - smsendian_handle_message_header(phdr); - if (urb->actual_length >= phdr->msgLength) { - surb->cb->size = phdr->msgLength; - - if (dev->response_alignment && - (phdr->msgFlags & MSG_HDR_FLAG_SPLIT_MSG)) { - - surb->cb->offset = - dev->response_alignment + - ((phdr->msgFlags >> 8) & 3); - - /* sanity check */ - if (((int) phdr->msgLength + - surb->cb->offset) > urb->actual_length) { - sms_err("invalid response " - "msglen %d offset %d " - "size %d", - phdr->msgLength, - surb->cb->offset, - urb->actual_length); - goto exit_and_resubmit; - } - - /* move buffer pointer and - * copy header to its new location */ - memcpy((char *) phdr + surb->cb->offset, - phdr, sizeof(struct SmsMsgHdr_ST)); - } else - surb->cb->offset = 0; - - smscore_onresponse(dev->coredev, surb->cb); - surb->cb = NULL; - } else { - sms_err("invalid response " - "msglen %d actual %d", - phdr->msgLength, urb->actual_length); - } - } else - sms_err("error, urb status %d, %d bytes", - urb->status, urb->actual_length); - - -exit_and_resubmit: - smsusb_submit_urb(dev, surb); -} - -static int smsusb_submit_urb(struct smsusb_device_t *dev, - struct smsusb_urb_t *surb) -{ - if (!surb->cb) { - surb->cb = smscore_getbuffer(dev->coredev); - if (!surb->cb) { - sms_err("smscore_getbuffer(...) returned NULL"); - return -ENOMEM; - } - } - - usb_fill_bulk_urb( - &surb->urb, - dev->udev, - usb_rcvbulkpipe(dev->udev, 0x81), - surb->cb->p, - dev->buffer_size, - smsusb_onresponse, - surb - ); - surb->urb.transfer_dma = surb->cb->phys; - surb->urb.transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - return usb_submit_urb(&surb->urb, GFP_ATOMIC); -} - -static void smsusb_stop_streaming(struct smsusb_device_t *dev) -{ - int i; - - for (i = 0; i < MAX_URBS; i++) { - usb_kill_urb(&dev->surbs[i].urb); - - if (dev->surbs[i].cb) { - smscore_putbuffer(dev->coredev, dev->surbs[i].cb); - dev->surbs[i].cb = NULL; - } - } -} - -static int smsusb_start_streaming(struct smsusb_device_t *dev) -{ - int i, rc; - - for (i = 0; i < MAX_URBS; i++) { - rc = smsusb_submit_urb(dev, &dev->surbs[i]); - if (rc < 0) { - sms_err("smsusb_submit_urb(...) failed"); - smsusb_stop_streaming(dev); - break; - } - } - - return rc; -} - -static int smsusb_sendrequest(void *context, void *buffer, size_t size) -{ - struct smsusb_device_t *dev = (struct smsusb_device_t *) context; - int dummy; - - smsendian_handle_message_header((struct SmsMsgHdr_ST *)buffer); - return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2), - buffer, size, &dummy, 1000); -} - -static char *smsusb1_fw_lkup[] = { - "dvbt_stellar_usb.inp", - "dvbh_stellar_usb.inp", - "tdmb_stellar_usb.inp", - "none", - "dvbt_bda_stellar_usb.inp", -}; - -static inline char *sms_get_fw_name(int mode, int board_id) -{ - char **fw = sms_get_board(board_id)->fw; - return (fw && fw[mode]) ? fw[mode] : smsusb1_fw_lkup[mode]; -} - -static int smsusb1_load_firmware(struct usb_device *udev, int id, int board_id) -{ - const struct firmware *fw; - u8 *fw_buffer; - int rc, dummy; - char *fw_filename; - - if (id < DEVICE_MODE_DVBT || id > DEVICE_MODE_DVBT_BDA) { - sms_err("invalid firmware id specified %d", id); - return -EINVAL; - } - - fw_filename = sms_get_fw_name(id, board_id); - - rc = request_firmware(&fw, fw_filename, &udev->dev); - if (rc < 0) { - sms_warn("failed to open \"%s\" mode %d, " - "trying again with default firmware", fw_filename, id); - - fw_filename = smsusb1_fw_lkup[id]; - rc = request_firmware(&fw, fw_filename, &udev->dev); - if (rc < 0) { - sms_warn("failed to open \"%s\" mode %d", - fw_filename, id); - - return rc; - } - } - - fw_buffer = kmalloc(fw->size, GFP_KERNEL); - if (fw_buffer) { - memcpy(fw_buffer, fw->data, fw->size); - - rc = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 2), - fw_buffer, fw->size, &dummy, 1000); - - sms_info("sent %zd(%d) bytes, rc %d", fw->size, dummy, rc); - - kfree(fw_buffer); - } else { - sms_err("failed to allocate firmware buffer"); - rc = -ENOMEM; - } - sms_info("read FW %s, size=%zd", fw_filename, fw->size); - - release_firmware(fw); - - return rc; -} - -static void smsusb1_detectmode(void *context, int *mode) -{ - char *product_string = - ((struct smsusb_device_t *) context)->udev->product; - - *mode = DEVICE_MODE_NONE; - - if (!product_string) { - product_string = "none"; - sms_err("product string not found"); - } else if (strstr(product_string, "DVBH")) - *mode = 1; - else if (strstr(product_string, "BDA")) - *mode = 4; - else if (strstr(product_string, "DVBT")) - *mode = 0; - else if (strstr(product_string, "TDMB")) - *mode = 2; - - sms_info("%d \"%s\"", *mode, product_string); -} - -static int smsusb1_setmode(void *context, int mode) -{ - struct SmsMsgHdr_ST Msg = { MSG_SW_RELOAD_REQ, 0, HIF_TASK, - sizeof(struct SmsMsgHdr_ST), 0 }; - - if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) { - sms_err("invalid firmware id specified %d", mode); - return -EINVAL; - } - - return smsusb_sendrequest(context, &Msg, sizeof(Msg)); -} - -static void smsusb_term_device(struct usb_interface *intf) -{ - struct smsusb_device_t *dev = usb_get_intfdata(intf); - - if (dev) { - smsusb_stop_streaming(dev); - - /* unregister from smscore */ - if (dev->coredev) - smscore_unregister_device(dev->coredev); - - sms_info("device %p destroyed", dev); - kfree(dev); - } - - usb_set_intfdata(intf, NULL); -} - -static int smsusb_init_device(struct usb_interface *intf, int board_id) -{ - struct smsdevice_params_t params; - struct smsusb_device_t *dev; - int i, rc; - - /* create device object */ - dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL); - if (!dev) { - sms_err("kzalloc(sizeof(struct smsusb_device_t) failed"); - return -ENOMEM; - } - - memset(¶ms, 0, sizeof(params)); - usb_set_intfdata(intf, dev); - dev->udev = interface_to_usbdev(intf); - - params.device_type = sms_get_board(board_id)->type; - - switch (params.device_type) { - case SMS_STELLAR: - dev->buffer_size = USB1_BUFFER_SIZE; - - params.setmode_handler = smsusb1_setmode; - params.detectmode_handler = smsusb1_detectmode; - break; - default: - sms_err("Unspecified sms device type!"); - /* fall-thru */ - case SMS_NOVA_A0: - case SMS_NOVA_B0: - case SMS_VEGA: - dev->buffer_size = USB2_BUFFER_SIZE; - dev->response_alignment = - le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) - - sizeof(struct SmsMsgHdr_ST); - - params.flags |= SMS_DEVICE_FAMILY2; - break; - } - - params.device = &dev->udev->dev; - params.buffer_size = dev->buffer_size; - params.num_buffers = MAX_BUFFERS; - params.sendrequest_handler = smsusb_sendrequest; - params.context = dev; - usb_make_path(dev->udev, params.devpath, sizeof(params.devpath)); - - /* register in smscore */ - rc = smscore_register_device(¶ms, &dev->coredev); - if (rc < 0) { - sms_err("smscore_register_device(...) failed, rc %d", rc); - smsusb_term_device(intf); - return rc; - } - - smscore_set_board_id(dev->coredev, board_id); - - /* initialize urbs */ - for (i = 0; i < MAX_URBS; i++) { - dev->surbs[i].dev = dev; - usb_init_urb(&dev->surbs[i].urb); - } - - sms_info("smsusb_start_streaming(...)."); - rc = smsusb_start_streaming(dev); - if (rc < 0) { - sms_err("smsusb_start_streaming(...) failed"); - smsusb_term_device(intf); - return rc; - } - - rc = smscore_start_device(dev->coredev); - if (rc < 0) { - sms_err("smscore_start_device(...) failed"); - smsusb_term_device(intf); - return rc; - } - - sms_info("device %p created", dev); - - return rc; -} - -static int __devinit smsusb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - char devpath[32]; - int i, rc; - - rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x81)); - rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x02)); - - if (intf->num_altsetting > 0) { - rc = usb_set_interface( - udev, intf->cur_altsetting->desc.bInterfaceNumber, 0); - if (rc < 0) { - sms_err("usb_set_interface failed, rc %d", rc); - return rc; - } - } - - sms_info("smsusb_probe %d", - intf->cur_altsetting->desc.bInterfaceNumber); - for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) - sms_info("endpoint %d %02x %02x %d", i, - intf->cur_altsetting->endpoint[i].desc.bEndpointAddress, - intf->cur_altsetting->endpoint[i].desc.bmAttributes, - intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize); - - if ((udev->actconfig->desc.bNumInterfaces == 2) && - (intf->cur_altsetting->desc.bInterfaceNumber == 0)) { - sms_err("rom interface 0 is not used"); - return -ENODEV; - } - - if (intf->cur_altsetting->desc.bInterfaceNumber == 1) { - snprintf(devpath, sizeof(devpath), "usb\\%d-%s", - udev->bus->busnum, udev->devpath); - sms_info("stellar device was found."); - return smsusb1_load_firmware( - udev, smscore_registry_getmode(devpath), - id->driver_info); - } - - rc = smsusb_init_device(intf, id->driver_info); - sms_info("rc %d", rc); - sms_board_load_modules(id->driver_info); - return rc; -} - -static void smsusb_disconnect(struct usb_interface *intf) -{ - smsusb_term_device(intf); -} - -static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg) -{ - struct smsusb_device_t *dev = usb_get_intfdata(intf); - printk(KERN_INFO "%s: Entering status %d.\n", __func__, msg.event); - smsusb_stop_streaming(dev); - return 0; -} - -static int smsusb_resume(struct usb_interface *intf) -{ - int rc, i; - struct smsusb_device_t *dev = usb_get_intfdata(intf); - struct usb_device *udev = interface_to_usbdev(intf); - - printk(KERN_INFO "%s: Entering.\n", __func__); - usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x81)); - usb_clear_halt(udev, usb_rcvbulkpipe(udev, 0x02)); - - for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) - printk(KERN_INFO "endpoint %d %02x %02x %d\n", i, - intf->cur_altsetting->endpoint[i].desc.bEndpointAddress, - intf->cur_altsetting->endpoint[i].desc.bmAttributes, - intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize); - - if (intf->num_altsetting > 0) { - rc = usb_set_interface(udev, - intf->cur_altsetting->desc. - bInterfaceNumber, 0); - if (rc < 0) { - printk(KERN_INFO "%s usb_set_interface failed, " - "rc %d\n", __func__, rc); - return rc; - } - } - - smsusb_start_streaming(dev); - return 0; -} - -static const struct usb_device_id smsusb_id_table[] __devinitconst = { - { USB_DEVICE(0x187f, 0x0010), - .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, - { USB_DEVICE(0x187f, 0x0100), - .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, - { USB_DEVICE(0x187f, 0x0200), - .driver_info = SMS1XXX_BOARD_SIANO_NOVA_A }, - { USB_DEVICE(0x187f, 0x0201), - .driver_info = SMS1XXX_BOARD_SIANO_NOVA_B }, - { USB_DEVICE(0x187f, 0x0300), - .driver_info = SMS1XXX_BOARD_SIANO_VEGA }, - { USB_DEVICE(0x2040, 0x1700), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT }, - { USB_DEVICE(0x2040, 0x1800), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A }, - { USB_DEVICE(0x2040, 0x1801), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B }, - { USB_DEVICE(0x2040, 0x2000), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, - { USB_DEVICE(0x2040, 0x2009), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 }, - { USB_DEVICE(0x2040, 0x200a), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, - { USB_DEVICE(0x2040, 0x2010), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, - { USB_DEVICE(0x2040, 0x2011), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, - { USB_DEVICE(0x2040, 0x2019), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, - { USB_DEVICE(0x2040, 0x5500), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0x5510), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0x5520), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0x5530), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0x5580), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0x5590), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x187f, 0x0202), - .driver_info = SMS1XXX_BOARD_SIANO_NICE }, - { USB_DEVICE(0x187f, 0x0301), - .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, - { USB_DEVICE(0x2040, 0xb900), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xb910), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xb980), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xb990), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xc000), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xc010), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xc080), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xc090), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xc0a0), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { USB_DEVICE(0x2040, 0xf5a0), - .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { } /* Terminating entry */ - }; - -MODULE_DEVICE_TABLE(usb, smsusb_id_table); - -static struct usb_driver smsusb_driver = { - .name = "smsusb", - .probe = smsusb_probe, - .disconnect = smsusb_disconnect, - .id_table = smsusb_id_table, - - .suspend = smsusb_suspend, - .resume = smsusb_resume, -}; - -module_usb_driver(smsusb_driver); - -MODULE_DESCRIPTION("Driver for the Siano SMS1xxx USB dongle"); -MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/ttusb-budget/Kconfig b/drivers/media/dvb/ttusb-budget/Kconfig deleted file mode 100644 index 2663ae39b886..000000000000 --- a/drivers/media/dvb/ttusb-budget/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -config DVB_TTUSB_BUDGET - tristate "Technotrend/Hauppauge Nova-USB devices" - depends on DVB_CORE && USB && I2C && PCI - select DVB_CX22700 if !DVB_FE_CUSTOMISE - select DVB_TDA1004X if !DVB_FE_CUSTOMISE - select DVB_VES1820 if !DVB_FE_CUSTOMISE - select DVB_TDA8083 if !DVB_FE_CUSTOMISE - select DVB_STV0299 if !DVB_FE_CUSTOMISE - select DVB_STV0297 if !DVB_FE_CUSTOMISE - select DVB_LNBP21 if !DVB_FE_CUSTOMISE - help - Support for external USB adapters designed by Technotrend and - produced by Hauppauge, shipped under the brand name 'Nova-USB'. - - These devices don't have a MPEG decoder built in, so you need - an external software decoder to watch TV. - - Say Y if you own such a device and want to use it. diff --git a/drivers/media/dvb/ttusb-budget/Makefile b/drivers/media/dvb/ttusb-budget/Makefile deleted file mode 100644 index f47bbf62dcde..000000000000 --- a/drivers/media/dvb/ttusb-budget/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DVB_TTUSB_BUDGET) += dvb-ttusb-budget.o - -ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c deleted file mode 100644 index 5b682cc4c814..000000000000 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ /dev/null @@ -1,1816 +0,0 @@ -/* - * TTUSB DVB driver - * - * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> - * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/wait.h> -#include <linux/fs.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/delay.h> -#include <linux/time.h> -#include <linux/errno.h> -#include <linux/jiffies.h> -#include <linux/mutex.h> -#include <linux/firmware.h> - -#include "dvb_frontend.h" -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_net.h" -#include "ves1820.h" -#include "cx22700.h" -#include "tda1004x.h" -#include "stv0299.h" -#include "tda8083.h" -#include "stv0297.h" -#include "lnbp21.h" - -#include <linux/dvb/frontend.h> -#include <linux/dvb/dmx.h> -#include <linux/pci.h> - -/* - TTUSB_HWSECTIONS: - the DSP supports filtering in hardware, however, since the "muxstream" - is a bit braindead (no matching channel masks or no matching filter mask), - we won't support this - yet. it doesn't event support negative filters, - so the best way is maybe to keep TTUSB_HWSECTIONS undef'd and just - parse TS data. USB bandwidth will be a problem when having large - datastreams, especially for dvb-net, but hey, that's not my problem. - - TTUSB_DISEQC, TTUSB_TONE: - let the STC do the diseqc/tone stuff. this isn't supported at least with - my TTUSB, so let it undef'd unless you want to implement another - frontend. never tested. - - debug: - define it to > 3 for really hardcore debugging. you probably don't want - this unless the device doesn't load at all. > 2 for bandwidth statistics. -*/ - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define dprintk(x...) do { if (debug) printk(KERN_DEBUG x); } while (0) - -#define ISO_BUF_COUNT 4 -#define FRAMES_PER_ISO_BUF 4 -#define ISO_FRAME_SIZE 912 -#define TTUSB_MAXCHANNEL 32 -#ifdef TTUSB_HWSECTIONS -#define TTUSB_MAXFILTER 16 /* ??? */ -#endif - -#define TTUSB_REV_2_2 0x22 -#define TTUSB_BUDGET_NAME "ttusb_stc_fw" - -/** - * since we're casting (struct ttusb*) <-> (struct dvb_demux*) around - * the dvb_demux field must be the first in struct!! - */ -struct ttusb { - struct dvb_demux dvb_demux; - struct dmxdev dmxdev; - struct dvb_net dvbnet; - - /* and one for USB access. */ - struct mutex semi2c; - struct mutex semusb; - - struct dvb_adapter adapter; - struct usb_device *dev; - - struct i2c_adapter i2c_adap; - - int disconnecting; - int iso_streaming; - - unsigned int bulk_out_pipe; - unsigned int bulk_in_pipe; - unsigned int isoc_in_pipe; - - void *iso_buffer; - dma_addr_t iso_dma_handle; - - struct urb *iso_urb[ISO_BUF_COUNT]; - - int running_feed_count; - int last_channel; - int last_filter; - - u8 c; /* transaction counter, wraps around... */ - fe_sec_tone_mode_t tone; - fe_sec_voltage_t voltage; - - int mux_state; // 0..2 - MuxSyncWord, 3 - nMuxPacks, 4 - muxpack - u8 mux_npacks; - u8 muxpack[256 + 8]; - int muxpack_ptr, muxpack_len; - - int insync; - - int cc; /* MuxCounter - will increment on EVERY MUX PACKET */ - /* (including stuffing. yes. really.) */ - - u8 last_result[32]; - - int revision; - - struct dvb_frontend* fe; -}; - -/* ugly workaround ... don't know why it's necessary to read */ -/* all result codes. */ - -static int ttusb_cmd(struct ttusb *ttusb, - const u8 * data, int len, int needresult) -{ - int actual_len; - int err; - int i; - - if (debug >= 3) { - printk(KERN_DEBUG ">"); - for (i = 0; i < len; ++i) - printk(KERN_CONT " %02x", data[i]); - printk(KERN_CONT "\n"); - } - - if (mutex_lock_interruptible(&ttusb->semusb) < 0) - return -EAGAIN; - - err = usb_bulk_msg(ttusb->dev, ttusb->bulk_out_pipe, - (u8 *) data, len, &actual_len, 1000); - if (err != 0) { - dprintk("%s: usb_bulk_msg(send) failed, err == %i!\n", - __func__, err); - mutex_unlock(&ttusb->semusb); - return err; - } - if (actual_len != len) { - dprintk("%s: only wrote %d of %d bytes\n", __func__, - actual_len, len); - mutex_unlock(&ttusb->semusb); - return -1; - } - - err = usb_bulk_msg(ttusb->dev, ttusb->bulk_in_pipe, - ttusb->last_result, 32, &actual_len, 1000); - - if (err != 0) { - printk("%s: failed, receive error %d\n", __func__, - err); - mutex_unlock(&ttusb->semusb); - return err; - } - - if (debug >= 3) { - actual_len = ttusb->last_result[3] + 4; - printk(KERN_DEBUG "<"); - for (i = 0; i < actual_len; ++i) - printk(KERN_CONT " %02x", ttusb->last_result[i]); - printk(KERN_CONT "\n"); - } - - if (!needresult) - mutex_unlock(&ttusb->semusb); - return 0; -} - -static int ttusb_result(struct ttusb *ttusb, u8 * data, int len) -{ - memcpy(data, ttusb->last_result, len); - mutex_unlock(&ttusb->semusb); - return 0; -} - -static int ttusb_i2c_msg(struct ttusb *ttusb, - u8 addr, u8 * snd_buf, u8 snd_len, u8 * rcv_buf, - u8 rcv_len) -{ - u8 b[0x28]; - u8 id = ++ttusb->c; - int i, err; - - if (snd_len > 0x28 - 7 || rcv_len > 0x20 - 7) - return -EINVAL; - - b[0] = 0xaa; - b[1] = id; - b[2] = 0x31; - b[3] = snd_len + 3; - b[4] = addr << 1; - b[5] = snd_len; - b[6] = rcv_len; - - for (i = 0; i < snd_len; i++) - b[7 + i] = snd_buf[i]; - - err = ttusb_cmd(ttusb, b, snd_len + 7, 1); - - if (err) - return -EREMOTEIO; - - err = ttusb_result(ttusb, b, 0x20); - - /* check if the i2c transaction was successful */ - if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO; - - if (rcv_len > 0) { - - if (err || b[0] != 0x55 || b[1] != id) { - dprintk - ("%s: usb_bulk_msg(recv) failed, err == %i, id == %02x, b == ", - __func__, err, id); - return -EREMOTEIO; - } - - for (i = 0; i < rcv_len; i++) - rcv_buf[i] = b[7 + i]; - } - - return rcv_len; -} - -static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num) -{ - struct ttusb *ttusb = i2c_get_adapdata(adapter); - int i = 0; - int inc; - - if (mutex_lock_interruptible(&ttusb->semi2c) < 0) - return -EAGAIN; - - while (i < num) { - u8 addr, snd_len, rcv_len, *snd_buf, *rcv_buf; - int err; - - if (num > i + 1 && (msg[i + 1].flags & I2C_M_RD)) { - addr = msg[i].addr; - snd_buf = msg[i].buf; - snd_len = msg[i].len; - rcv_buf = msg[i + 1].buf; - rcv_len = msg[i + 1].len; - inc = 2; - } else { - addr = msg[i].addr; - snd_buf = msg[i].buf; - snd_len = msg[i].len; - rcv_buf = NULL; - rcv_len = 0; - inc = 1; - } - - err = ttusb_i2c_msg(ttusb, addr, - snd_buf, snd_len, rcv_buf, rcv_len); - - if (err < rcv_len) { - dprintk("%s: i == %i\n", __func__, i); - break; - } - - i += inc; - } - - mutex_unlock(&ttusb->semi2c); - return i; -} - -static int ttusb_boot_dsp(struct ttusb *ttusb) -{ - const struct firmware *fw; - int i, err; - u8 b[40]; - - err = request_firmware(&fw, "ttusb-budget/dspbootcode.bin", - &ttusb->dev->dev); - if (err) { - printk(KERN_ERR "ttusb-budget: failed to request firmware\n"); - return err; - } - - /* BootBlock */ - b[0] = 0xaa; - b[2] = 0x13; - b[3] = 28; - - /* upload dsp code in 32 byte steps (36 didn't work for me ...) */ - /* 32 is max packet size, no messages should be splitted. */ - for (i = 0; i < fw->size; i += 28) { - memcpy(&b[4], &fw->data[i], 28); - - b[1] = ++ttusb->c; - - err = ttusb_cmd(ttusb, b, 32, 0); - if (err) - goto done; - } - - /* last block ... */ - b[1] = ++ttusb->c; - b[2] = 0x13; - b[3] = 0; - - err = ttusb_cmd(ttusb, b, 4, 0); - if (err) - goto done; - - /* BootEnd */ - b[1] = ++ttusb->c; - b[2] = 0x14; - b[3] = 0; - - err = ttusb_cmd(ttusb, b, 4, 0); - - done: - release_firmware(fw); - if (err) { - dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __func__, err); - } - - return err; -} - -static int ttusb_set_channel(struct ttusb *ttusb, int chan_id, int filter_type, - int pid) -{ - int err; - /* SetChannel */ - u8 b[] = { 0xaa, ++ttusb->c, 0x22, 4, chan_id, filter_type, - (pid >> 8) & 0xff, pid & 0xff - }; - - err = ttusb_cmd(ttusb, b, sizeof(b), 0); - return err; -} - -static int ttusb_del_channel(struct ttusb *ttusb, int channel_id) -{ - int err; - /* DelChannel */ - u8 b[] = { 0xaa, ++ttusb->c, 0x23, 1, channel_id }; - - err = ttusb_cmd(ttusb, b, sizeof(b), 0); - return err; -} - -#ifdef TTUSB_HWSECTIONS -static int ttusb_set_filter(struct ttusb *ttusb, int filter_id, - int associated_chan, u8 filter[8], u8 mask[8]) -{ - int err; - /* SetFilter */ - u8 b[] = { 0xaa, 0, 0x24, 0x1a, filter_id, associated_chan, - filter[0], filter[1], filter[2], filter[3], - filter[4], filter[5], filter[6], filter[7], - filter[8], filter[9], filter[10], filter[11], - mask[0], mask[1], mask[2], mask[3], - mask[4], mask[5], mask[6], mask[7], - mask[8], mask[9], mask[10], mask[11] - }; - - err = ttusb_cmd(ttusb, b, sizeof(b), 0); - return err; -} - -static int ttusb_del_filter(struct ttusb *ttusb, int filter_id) -{ - int err; - /* DelFilter */ - u8 b[] = { 0xaa, ++ttusb->c, 0x25, 1, filter_id }; - - err = ttusb_cmd(ttusb, b, sizeof(b), 0); - return err; -} -#endif - -static int ttusb_init_controller(struct ttusb *ttusb) -{ - u8 b0[] = { 0xaa, ++ttusb->c, 0x15, 1, 0 }; - u8 b1[] = { 0xaa, ++ttusb->c, 0x15, 1, 1 }; - u8 b2[] = { 0xaa, ++ttusb->c, 0x32, 1, 0 }; - /* i2c write read: 5 bytes, addr 0x10, 0x02 bytes write, 1 bytes read. */ - u8 b3[] = - { 0xaa, ++ttusb->c, 0x31, 5, 0x10, 0x02, 0x01, 0x00, 0x1e }; - u8 b4[] = - { 0x55, ttusb->c, 0x31, 4, 0x10, 0x02, 0x01, 0x00, 0x1e }; - - u8 get_version[] = { 0xaa, ++ttusb->c, 0x17, 5, 0, 0, 0, 0, 0 }; - u8 get_dsp_version[0x20] = - { 0xaa, ++ttusb->c, 0x26, 28, 0, 0, 0, 0, 0 }; - int err; - - /* reset board */ - if ((err = ttusb_cmd(ttusb, b0, sizeof(b0), 0))) - return err; - - /* reset board (again?) */ - if ((err = ttusb_cmd(ttusb, b1, sizeof(b1), 0))) - return err; - - ttusb_boot_dsp(ttusb); - - /* set i2c bit rate */ - if ((err = ttusb_cmd(ttusb, b2, sizeof(b2), 0))) - return err; - - if ((err = ttusb_cmd(ttusb, b3, sizeof(b3), 1))) - return err; - - err = ttusb_result(ttusb, b4, sizeof(b4)); - - if ((err = ttusb_cmd(ttusb, get_version, sizeof(get_version), 1))) - return err; - - if ((err = ttusb_result(ttusb, get_version, sizeof(get_version)))) - return err; - - dprintk("%s: stc-version: %c%c%c%c%c\n", __func__, - get_version[4], get_version[5], get_version[6], - get_version[7], get_version[8]); - - if (memcmp(get_version + 4, "V 0.0", 5) && - memcmp(get_version + 4, "V 1.1", 5) && - memcmp(get_version + 4, "V 2.1", 5) && - memcmp(get_version + 4, "V 2.2", 5)) { - printk - ("%s: unknown STC version %c%c%c%c%c, please report!\n", - __func__, get_version[4], get_version[5], - get_version[6], get_version[7], get_version[8]); - } - - ttusb->revision = ((get_version[6] - '0') << 4) | - (get_version[8] - '0'); - - err = - ttusb_cmd(ttusb, get_dsp_version, sizeof(get_dsp_version), 1); - if (err) - return err; - - err = - ttusb_result(ttusb, get_dsp_version, sizeof(get_dsp_version)); - if (err) - return err; - printk("%s: dsp-version: %c%c%c\n", __func__, - get_dsp_version[4], get_dsp_version[5], get_dsp_version[6]); - return 0; -} - -#ifdef TTUSB_DISEQC -static int ttusb_send_diseqc(struct dvb_frontend* fe, - const struct dvb_diseqc_master_cmd *cmd) -{ - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - u8 b[12] = { 0xaa, ++ttusb->c, 0x18 }; - - int err; - - b[3] = 4 + 2 + cmd->msg_len; - b[4] = 0xFF; /* send diseqc master, not burst */ - b[5] = cmd->msg_len; - - memcpy(b + 5, cmd->msg, cmd->msg_len); - - /* Diseqc */ - if ((err = ttusb_cmd(ttusb, b, 4 + b[3], 0))) { - dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __func__, err); - } - - return err; -} -#endif - -static int ttusb_update_lnb(struct ttusb *ttusb) -{ - u8 b[] = { 0xaa, ++ttusb->c, 0x16, 5, /*power: */ 1, - ttusb->voltage == SEC_VOLTAGE_18 ? 0 : 1, - ttusb->tone == SEC_TONE_ON ? 1 : 0, 1, 1 - }; - int err; - - /* SetLNB */ - if ((err = ttusb_cmd(ttusb, b, sizeof(b), 0))) { - dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __func__, err); - } - - return err; -} - -static int ttusb_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - - ttusb->voltage = voltage; - return ttusb_update_lnb(ttusb); -} - -#ifdef TTUSB_TONE -static int ttusb_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) -{ - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - - ttusb->tone = tone; - return ttusb_update_lnb(ttusb); -} -#endif - - -#if 0 -static void ttusb_set_led_freq(struct ttusb *ttusb, u8 freq) -{ - u8 b[] = { 0xaa, ++ttusb->c, 0x19, 1, freq }; - int err, actual_len; - - err = ttusb_cmd(ttusb, b, sizeof(b), 0); - if (err) { - dprintk("%s: usb_bulk_msg() failed, return value %i!\n", - __func__, err); - } -} -#endif - -/*****************************************************************************/ - -#ifdef TTUSB_HWSECTIONS -static void ttusb_handle_ts_data(struct ttusb_channel *channel, - const u8 * data, int len); -static void ttusb_handle_sec_data(struct ttusb_channel *channel, - const u8 * data, int len); -#endif - -static int numpkt, numts, numstuff, numsec, numinvalid; -static unsigned long lastj; - -static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, - int len) -{ - u16 csum = 0, cc; - int i; - for (i = 0; i < len; i += 2) - csum ^= le16_to_cpup((__le16 *) (muxpack + i)); - if (csum) { - printk("%s: muxpack with incorrect checksum, ignoring\n", - __func__); - numinvalid++; - return; - } - - cc = (muxpack[len - 4] << 8) | muxpack[len - 3]; - cc &= 0x7FFF; - if ((cc != ttusb->cc) && (ttusb->cc != -1)) - printk("%s: cc discontinuity (%d frames missing)\n", - __func__, (cc - ttusb->cc) & 0x7FFF); - ttusb->cc = (cc + 1) & 0x7FFF; - if (muxpack[0] & 0x80) { -#ifdef TTUSB_HWSECTIONS - /* section data */ - int pusi = muxpack[0] & 0x40; - int channel = muxpack[0] & 0x1F; - int payload = muxpack[1]; - const u8 *data = muxpack + 2; - /* check offset flag */ - if (muxpack[0] & 0x20) - data++; - - ttusb_handle_sec_data(ttusb->channel + channel, data, - payload); - data += payload; - - if ((!!(ttusb->muxpack[0] & 0x20)) ^ - !!(ttusb->muxpack[1] & 1)) - data++; -#warning TODO: pusi - printk("cc: %04x\n", (data[0] << 8) | data[1]); -#endif - numsec++; - } else if (muxpack[0] == 0x47) { -#ifdef TTUSB_HWSECTIONS - /* we have TS data here! */ - int pid = ((muxpack[1] & 0x0F) << 8) | muxpack[2]; - int channel; - for (channel = 0; channel < TTUSB_MAXCHANNEL; ++channel) - if (ttusb->channel[channel].active - && (pid == ttusb->channel[channel].pid)) - ttusb_handle_ts_data(ttusb->channel + - channel, muxpack, - 188); -#endif - numts++; - dvb_dmx_swfilter_packets(&ttusb->dvb_demux, muxpack, 1); - } else if (muxpack[0] != 0) { - numinvalid++; - printk("illegal muxpack type %02x\n", muxpack[0]); - } else - numstuff++; -} - -static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len) -{ - int maxwork = 1024; - while (len) { - if (!(maxwork--)) { - printk("%s: too much work\n", __func__); - break; - } - - switch (ttusb->mux_state) { - case 0: - case 1: - case 2: - len--; - if (*data++ == 0xAA) - ++ttusb->mux_state; - else { - ttusb->mux_state = 0; - if (ttusb->insync) { - dprintk("%s: %02x\n", - __func__, data[-1]); - printk(KERN_INFO "%s: lost sync.\n", - __func__); - ttusb->insync = 0; - } - } - break; - case 3: - ttusb->insync = 1; - len--; - ttusb->mux_npacks = *data++; - ++ttusb->mux_state; - ttusb->muxpack_ptr = 0; - /* maximum bytes, until we know the length */ - ttusb->muxpack_len = 2; - break; - case 4: - { - int avail; - avail = len; - if (avail > - (ttusb->muxpack_len - - ttusb->muxpack_ptr)) - avail = - ttusb->muxpack_len - - ttusb->muxpack_ptr; - memcpy(ttusb->muxpack + ttusb->muxpack_ptr, - data, avail); - ttusb->muxpack_ptr += avail; - BUG_ON(ttusb->muxpack_ptr > 264); - data += avail; - len -= avail; - /* determine length */ - if (ttusb->muxpack_ptr == 2) { - if (ttusb->muxpack[0] & 0x80) { - ttusb->muxpack_len = - ttusb->muxpack[1] + 2; - if (ttusb-> - muxpack[0] & 0x20) - ttusb-> - muxpack_len++; - if ((!! - (ttusb-> - muxpack[0] & 0x20)) ^ - !!(ttusb-> - muxpack[1] & 1)) - ttusb-> - muxpack_len++; - ttusb->muxpack_len += 4; - } else if (ttusb->muxpack[0] == - 0x47) - ttusb->muxpack_len = - 188 + 4; - else if (ttusb->muxpack[0] == 0x00) - ttusb->muxpack_len = - ttusb->muxpack[1] + 2 + - 4; - else { - dprintk - ("%s: invalid state: first byte is %x\n", - __func__, - ttusb->muxpack[0]); - ttusb->mux_state = 0; - } - } - - /** - * if length is valid and we reached the end: - * goto next muxpack - */ - if ((ttusb->muxpack_ptr >= 2) && - (ttusb->muxpack_ptr == - ttusb->muxpack_len)) { - ttusb_process_muxpack(ttusb, - ttusb-> - muxpack, - ttusb-> - muxpack_ptr); - ttusb->muxpack_ptr = 0; - /* maximum bytes, until we know the length */ - ttusb->muxpack_len = 2; - - /** - * no muxpacks left? - * return to search-sync state - */ - if (!ttusb->mux_npacks--) { - ttusb->mux_state = 0; - break; - } - } - break; - } - default: - BUG(); - break; - } - } -} - -static void ttusb_iso_irq(struct urb *urb) -{ - struct ttusb *ttusb = urb->context; - struct usb_iso_packet_descriptor *d; - u8 *data; - int len, i; - - if (!ttusb->iso_streaming) - return; - -#if 0 - printk("%s: status %d, errcount == %d, length == %i\n", - __func__, - urb->status, urb->error_count, urb->actual_length); -#endif - - if (!urb->status) { - for (i = 0; i < urb->number_of_packets; ++i) { - numpkt++; - if (time_after_eq(jiffies, lastj + HZ)) { - dprintk("frames/s: %lu (ts: %d, stuff %d, " - "sec: %d, invalid: %d, all: %d)\n", - numpkt * HZ / (jiffies - lastj), - numts, numstuff, numsec, numinvalid, - numts + numstuff + numsec + numinvalid); - numts = numstuff = numsec = numinvalid = 0; - lastj = jiffies; - numpkt = 0; - } - d = &urb->iso_frame_desc[i]; - data = urb->transfer_buffer + d->offset; - len = d->actual_length; - d->actual_length = 0; - d->status = 0; - ttusb_process_frame(ttusb, data, len); - } - } - usb_submit_urb(urb, GFP_ATOMIC); -} - -static void ttusb_free_iso_urbs(struct ttusb *ttusb) -{ - int i; - - for (i = 0; i < ISO_BUF_COUNT; i++) - if (ttusb->iso_urb[i]) - usb_free_urb(ttusb->iso_urb[i]); - - pci_free_consistent(NULL, - ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * - ISO_BUF_COUNT, ttusb->iso_buffer, - ttusb->iso_dma_handle); -} - -static int ttusb_alloc_iso_urbs(struct ttusb *ttusb) -{ - int i; - - ttusb->iso_buffer = pci_alloc_consistent(NULL, - ISO_FRAME_SIZE * - FRAMES_PER_ISO_BUF * - ISO_BUF_COUNT, - &ttusb->iso_dma_handle); - - if (!ttusb->iso_buffer) { - dprintk("%s: pci_alloc_consistent - not enough memory\n", - __func__); - return -ENOMEM; - } - - memset(ttusb->iso_buffer, 0, - ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT); - - for (i = 0; i < ISO_BUF_COUNT; i++) { - struct urb *urb; - - if (! - (urb = - usb_alloc_urb(FRAMES_PER_ISO_BUF, GFP_ATOMIC))) { - ttusb_free_iso_urbs(ttusb); - return -ENOMEM; - } - - ttusb->iso_urb[i] = urb; - } - - return 0; -} - -static void ttusb_stop_iso_xfer(struct ttusb *ttusb) -{ - int i; - - for (i = 0; i < ISO_BUF_COUNT; i++) - usb_kill_urb(ttusb->iso_urb[i]); - - ttusb->iso_streaming = 0; -} - -static int ttusb_start_iso_xfer(struct ttusb *ttusb) -{ - int i, j, err, buffer_offset = 0; - - if (ttusb->iso_streaming) { - printk("%s: iso xfer already running!\n", __func__); - return 0; - } - - ttusb->cc = -1; - ttusb->insync = 0; - ttusb->mux_state = 0; - - for (i = 0; i < ISO_BUF_COUNT; i++) { - int frame_offset = 0; - struct urb *urb = ttusb->iso_urb[i]; - - urb->dev = ttusb->dev; - urb->context = ttusb; - urb->complete = ttusb_iso_irq; - urb->pipe = ttusb->isoc_in_pipe; - urb->transfer_flags = URB_ISO_ASAP; - urb->interval = 1; - urb->number_of_packets = FRAMES_PER_ISO_BUF; - urb->transfer_buffer_length = - ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF; - urb->transfer_buffer = ttusb->iso_buffer + buffer_offset; - buffer_offset += ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF; - - for (j = 0; j < FRAMES_PER_ISO_BUF; j++) { - urb->iso_frame_desc[j].offset = frame_offset; - urb->iso_frame_desc[j].length = ISO_FRAME_SIZE; - frame_offset += ISO_FRAME_SIZE; - } - } - - for (i = 0; i < ISO_BUF_COUNT; i++) { - if ((err = usb_submit_urb(ttusb->iso_urb[i], GFP_ATOMIC))) { - ttusb_stop_iso_xfer(ttusb); - printk - ("%s: failed urb submission (%i: err = %i)!\n", - __func__, i, err); - return err; - } - } - - ttusb->iso_streaming = 1; - - return 0; -} - -#ifdef TTUSB_HWSECTIONS -static void ttusb_handle_ts_data(struct dvb_demux_feed *dvbdmxfeed, const u8 * data, - int len) -{ - dvbdmxfeed->cb.ts(data, len, 0, 0, &dvbdmxfeed->feed.ts, 0); -} - -static void ttusb_handle_sec_data(struct dvb_demux_feed *dvbdmxfeed, const u8 * data, - int len) -{ -// struct dvb_demux_feed *dvbdmxfeed = channel->dvbdmxfeed; -#error TODO: handle ugly stuff -// dvbdmxfeed->cb.sec(data, len, 0, 0, &dvbdmxfeed->feed.sec, 0); -} -#endif - -static int ttusb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct ttusb *ttusb = (struct ttusb *) dvbdmxfeed->demux; - int feed_type = 1; - - dprintk("ttusb_start_feed\n"); - - switch (dvbdmxfeed->type) { - case DMX_TYPE_TS: - break; - case DMX_TYPE_SEC: - break; - default: - return -EINVAL; - } - - if (dvbdmxfeed->type == DMX_TYPE_TS) { - switch (dvbdmxfeed->pes_type) { - case DMX_TS_PES_VIDEO: - case DMX_TS_PES_AUDIO: - case DMX_TS_PES_TELETEXT: - case DMX_TS_PES_PCR: - case DMX_TS_PES_OTHER: - break; - default: - return -EINVAL; - } - } - -#ifdef TTUSB_HWSECTIONS -#error TODO: allocate filters - if (dvbdmxfeed->type == DMX_TYPE_TS) { - feed_type = 1; - } else if (dvbdmxfeed->type == DMX_TYPE_SEC) { - feed_type = 2; - } -#endif - - ttusb_set_channel(ttusb, dvbdmxfeed->index, feed_type, dvbdmxfeed->pid); - - if (0 == ttusb->running_feed_count++) - ttusb_start_iso_xfer(ttusb); - - return 0; -} - -static int ttusb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct ttusb *ttusb = (struct ttusb *) dvbdmxfeed->demux; - - ttusb_del_channel(ttusb, dvbdmxfeed->index); - - if (--ttusb->running_feed_count == 0) - ttusb_stop_iso_xfer(ttusb); - - return 0; -} - -static int ttusb_setup_interfaces(struct ttusb *ttusb) -{ - usb_set_interface(ttusb->dev, 1, 1); - - ttusb->bulk_out_pipe = usb_sndbulkpipe(ttusb->dev, 1); - ttusb->bulk_in_pipe = usb_rcvbulkpipe(ttusb->dev, 1); - ttusb->isoc_in_pipe = usb_rcvisocpipe(ttusb->dev, 2); - - return 0; -} - -#if 0 -static u8 stc_firmware[8192]; - -static int stc_open(struct inode *inode, struct file *file) -{ - struct ttusb *ttusb = file->private_data; - int addr; - - for (addr = 0; addr < 8192; addr += 16) { - u8 snd_buf[2] = { addr >> 8, addr & 0xFF }; - ttusb_i2c_msg(ttusb, 0x50, snd_buf, 2, stc_firmware + addr, - 16); - } - - return 0; -} - -static ssize_t stc_read(struct file *file, char *buf, size_t count, - loff_t *offset) -{ - return simple_read_from_buffer(buf, count, offset, stc_firmware, 8192); -} - -static int stc_release(struct inode *inode, struct file *file) -{ - return 0; -} - -static const struct file_operations stc_fops = { - .owner = THIS_MODULE, - .read = stc_read, - .open = stc_open, - .release = stc_release, -}; -#endif - -static u32 functionality(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C; -} - - - -static int alps_tdmb7_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - u8 data[4]; - struct i2c_msg msg = {.addr=0x61, .flags=0, .buf=data, .len=sizeof(data) }; - u32 div; - - div = (p->frequency + 36166667) / 166667; - - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = ((div >> 10) & 0x60) | 0x85; - data[3] = p->frequency < 592000000 ? 0x40 : 0x80; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct cx22700_config alps_tdmb7_config = { - .demod_address = 0x43, -}; - - - - - -static int philips_tdm1316l_tuner_init(struct dvb_frontend* fe) -{ - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; - static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; - struct i2c_msg tuner_msg = { .addr=0x60, .flags=0, .buf=td1316_init, .len=sizeof(td1316_init) }; - - // setup PLL configuration - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) return -EIO; - msleep(1); - - // disable the mc44BC374c (do not check for errors) - tuner_msg.addr = 0x65; - tuner_msg.buf = disable_mc44BC374c; - tuner_msg.len = sizeof(disable_mc44BC374c); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { - i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1); - } - - return 0; -} - -static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - u8 tuner_buf[4]; - struct i2c_msg tuner_msg = {.addr=0x60, .flags=0, .buf=tuner_buf, .len=sizeof(tuner_buf) }; - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = p->frequency + 36130000; - if (tuner_frequency < 87000000) return -EINVAL; - else if (tuner_frequency < 130000000) cp = 3; - else if (tuner_frequency < 160000000) cp = 5; - else if (tuner_frequency < 200000000) cp = 6; - else if (tuner_frequency < 290000000) cp = 3; - else if (tuner_frequency < 420000000) cp = 5; - else if (tuner_frequency < 480000000) cp = 6; - else if (tuner_frequency < 620000000) cp = 3; - else if (tuner_frequency < 830000000) cp = 5; - else if (tuner_frequency < 895000000) cp = 7; - else return -EINVAL; - - // determine band - if (p->frequency < 49000000) - return -EINVAL; - else if (p->frequency < 159000000) - band = 1; - else if (p->frequency < 444000000) - band = 2; - else if (p->frequency < 861000000) - band = 4; - else return -EINVAL; - - // setup PLL filter - switch (p->bandwidth_hz) { - case 6000000: - tda1004x_writereg(fe, 0x0C, 0); - filter = 0; - break; - - case 7000000: - tda1004x_writereg(fe, 0x0C, 0); - filter = 0; - break; - - case 8000000: - tda1004x_writereg(fe, 0x0C, 0xFF); - filter = 1; - break; - - default: - return -EINVAL; - } - - // calculate divisor - // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) - tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; - - // setup tuner buffer - tuner_buf[0] = tuner_frequency >> 8; - tuner_buf[1] = tuner_frequency & 0xff; - tuner_buf[2] = 0xca; - tuner_buf[3] = (cp << 5) | (filter << 3) | band; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(1); - return 0; -} - -static int philips_tdm1316l_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) -{ - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - - return request_firmware(fw, name, &ttusb->dev->dev); -} - -static struct tda1004x_config philips_tdm1316l_config = { - - .demod_address = 0x8, - .invert = 1, - .invert_oclk = 0, - .request_firmware = philips_tdm1316l_request_firmware, -}; - -static u8 alps_bsbe1_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x92, - 0xff, 0xff -}; - -static u8 alps_bsru6_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x52, - 0xff, 0xff -}; - -static int alps_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - - if (srate < 1500000) { - aclk = 0xb7; - bclk = 0x47; - } else if (srate < 3000000) { - aclk = 0xb7; - bclk = 0x4b; - } else if (srate < 7000000) { - aclk = 0xb7; - bclk = 0x4f; - } else if (srate < 14000000) { - aclk = 0xb7; - bclk = 0x53; - } else if (srate < 30000000) { - aclk = 0xb6; - bclk = 0x53; - } else if (srate < 45000000) { - aclk = 0xb4; - bclk = 0x51; - } - - stv0299_writereg(fe, 0x13, aclk); - stv0299_writereg(fe, 0x14, bclk); - stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg(fe, 0x21, (ratio) & 0xf0); - - return 0; -} - -static int philips_tsa5059_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - u8 buf[4]; - u32 div; - struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; - - if ((p->frequency < 950000) || (p->frequency > 2150000)) - return -EINVAL; - - div = (p->frequency + (125 - 1)) / 125; /* round correctly */ - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - buf[3] = 0xC4; - - if (p->frequency > 1530000) - buf[3] = 0xC0; - - /* BSBE1 wants XCE bit set */ - if (ttusb->revision == TTUSB_REV_2_2) - buf[3] |= 0x20; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) - return -EIO; - - return 0; -} - -static struct stv0299_config alps_stv0299_config = { - .demod_address = 0x68, - .inittab = alps_bsru6_inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = alps_stv0299_set_symbol_rate, -}; - -static int ttusb_novas_grundig_29504_491_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv; - u8 buf[4]; - u32 div; - struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) }; - - div = p->frequency / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x8e; - buf[3] = 0x00; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &msg, 1) != 1) - return -EIO; - - return 0; -} - -static struct tda8083_config ttusb_novas_grundig_29504_491_config = { - - .demod_address = 0x68, -}; - -static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusb* ttusb = fe->dvb->priv; - u32 div; - u8 data[4]; - struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; - - div = (p->frequency + 35937500 + 31250) / 62500; - - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x85 | ((div >> 10) & 0x60); - data[3] = (p->frequency < 174000000 ? 0x88 : p->frequency < 470000000 ? 0x84 : 0x81); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer (&ttusb->i2c_adap, &msg, 1) != 1) - return -EIO; - - return 0; -} - - -static struct ves1820_config alps_tdbe2_config = { - .demod_address = 0x09, - .xin = 57840000UL, - .invert = 1, - .selagc = VES1820_SELAGC_SIGNAMPERR, -}; - -static u8 read_pwm(struct ttusb* ttusb) -{ - u8 b = 0xff; - u8 pwm; - struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, - { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; - - if ((i2c_transfer(&ttusb->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) - pwm = 0x48; - - return pwm; -} - - -static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusb *ttusb = (struct ttusb *) fe->dvb->priv; - u8 tuner_buf[5]; - struct i2c_msg tuner_msg = {.addr = 0x60, - .flags = 0, - .buf = tuner_buf, - .len = sizeof(tuner_buf) }; - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = p->frequency; - if (tuner_frequency < 87000000) {return -EINVAL;} - else if (tuner_frequency < 130000000) {cp = 3; band = 1;} - else if (tuner_frequency < 160000000) {cp = 5; band = 1;} - else if (tuner_frequency < 200000000) {cp = 6; band = 1;} - else if (tuner_frequency < 290000000) {cp = 3; band = 2;} - else if (tuner_frequency < 420000000) {cp = 5; band = 2;} - else if (tuner_frequency < 480000000) {cp = 6; band = 2;} - else if (tuner_frequency < 620000000) {cp = 3; band = 4;} - else if (tuner_frequency < 830000000) {cp = 5; band = 4;} - else if (tuner_frequency < 895000000) {cp = 7; band = 4;} - else {return -EINVAL;} - - // assume PLL filter should always be 8MHz for the moment. - filter = 1; - - // calculate divisor - // (Finput + Fif)/Fref; Fif = 36125000 Hz, Fref = 62500 Hz - tuner_frequency = ((p->frequency + 36125000) / 62500); - - // setup tuner buffer - tuner_buf[0] = tuner_frequency >> 8; - tuner_buf[1] = tuner_frequency & 0xff; - tuner_buf[2] = 0xc8; - tuner_buf[3] = (cp << 5) | (filter << 3) | band; - tuner_buf[4] = 0x80; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { - printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 1\n"); - return -EIO; - } - - msleep(50); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) { - printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 2\n"); - return -EIO; - } - - msleep(1); - - return 0; -} - -static u8 dvbc_philips_tdm1316l_inittab[] = { - 0x80, 0x21, - 0x80, 0x20, - 0x81, 0x01, - 0x81, 0x00, - 0x00, 0x09, - 0x01, 0x69, - 0x03, 0x00, - 0x04, 0x00, - 0x07, 0x00, - 0x08, 0x00, - 0x20, 0x00, - 0x21, 0x40, - 0x22, 0x00, - 0x23, 0x00, - 0x24, 0x40, - 0x25, 0x88, - 0x30, 0xff, - 0x31, 0x00, - 0x32, 0xff, - 0x33, 0x00, - 0x34, 0x50, - 0x35, 0x7f, - 0x36, 0x00, - 0x37, 0x20, - 0x38, 0x00, - 0x40, 0x1c, - 0x41, 0xff, - 0x42, 0x29, - 0x43, 0x20, - 0x44, 0xff, - 0x45, 0x00, - 0x46, 0x00, - 0x49, 0x04, - 0x4a, 0xff, - 0x4b, 0x7f, - 0x52, 0x30, - 0x55, 0xae, - 0x56, 0x47, - 0x57, 0xe1, - 0x58, 0x3a, - 0x5a, 0x1e, - 0x5b, 0x34, - 0x60, 0x00, - 0x63, 0x00, - 0x64, 0x00, - 0x65, 0x00, - 0x66, 0x00, - 0x67, 0x00, - 0x68, 0x00, - 0x69, 0x00, - 0x6a, 0x02, - 0x6b, 0x00, - 0x70, 0xff, - 0x71, 0x00, - 0x72, 0x00, - 0x73, 0x00, - 0x74, 0x0c, - 0x80, 0x00, - 0x81, 0x00, - 0x82, 0x00, - 0x83, 0x00, - 0x84, 0x04, - 0x85, 0x80, - 0x86, 0x24, - 0x87, 0x78, - 0x88, 0x00, - 0x89, 0x00, - 0x90, 0x01, - 0x91, 0x01, - 0xa0, 0x00, - 0xa1, 0x00, - 0xa2, 0x00, - 0xb0, 0x91, - 0xb1, 0x0b, - 0xc0, 0x4b, - 0xc1, 0x00, - 0xc2, 0x00, - 0xd0, 0x00, - 0xd1, 0x00, - 0xd2, 0x00, - 0xd3, 0x00, - 0xd4, 0x00, - 0xd5, 0x00, - 0xde, 0x00, - 0xdf, 0x00, - 0x61, 0x38, - 0x62, 0x0a, - 0x53, 0x13, - 0x59, 0x08, - 0x55, 0x00, - 0x56, 0x40, - 0x57, 0x08, - 0x58, 0x3d, - 0x88, 0x10, - 0xa0, 0x00, - 0xa0, 0x00, - 0xa0, 0x00, - 0xa0, 0x04, - 0xff, 0xff, -}; - -static struct stv0297_config dvbc_philips_tdm1316l_config = { - .demod_address = 0x1c, - .inittab = dvbc_philips_tdm1316l_inittab, - .invert = 0, -}; - -static void frontend_init(struct ttusb* ttusb) -{ - switch(le16_to_cpu(ttusb->dev->descriptor.idProduct)) { - case 0x1003: // Hauppauge/TT Nova-USB-S budget (stv0299/ALPS BSRU6|BSBE1(tsa5059)) - // try the stv0299 based first - ttusb->fe = dvb_attach(stv0299_attach, &alps_stv0299_config, &ttusb->i2c_adap); - if (ttusb->fe != NULL) { - ttusb->fe->ops.tuner_ops.set_params = philips_tsa5059_tuner_set_params; - - if(ttusb->revision == TTUSB_REV_2_2) { // ALPS BSBE1 - alps_stv0299_config.inittab = alps_bsbe1_inittab; - dvb_attach(lnbp21_attach, ttusb->fe, &ttusb->i2c_adap, 0, 0); - } else { // ALPS BSRU6 - ttusb->fe->ops.set_voltage = ttusb_set_voltage; - } - break; - } - - // Grundig 29504-491 - ttusb->fe = dvb_attach(tda8083_attach, &ttusb_novas_grundig_29504_491_config, &ttusb->i2c_adap); - if (ttusb->fe != NULL) { - ttusb->fe->ops.tuner_ops.set_params = ttusb_novas_grundig_29504_491_tuner_set_params; - ttusb->fe->ops.set_voltage = ttusb_set_voltage; - break; - } - break; - - case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) - ttusb->fe = dvb_attach(ves1820_attach, &alps_tdbe2_config, &ttusb->i2c_adap, read_pwm(ttusb)); - if (ttusb->fe != NULL) { - ttusb->fe->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; - break; - } - - ttusb->fe = dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &ttusb->i2c_adap); - if (ttusb->fe != NULL) { - ttusb->fe->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; - break; - } - break; - - case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??)) - // try the ALPS TDMB7 first - ttusb->fe = dvb_attach(cx22700_attach, &alps_tdmb7_config, &ttusb->i2c_adap); - if (ttusb->fe != NULL) { - ttusb->fe->ops.tuner_ops.set_params = alps_tdmb7_tuner_set_params; - break; - } - - // Philips td1316 - ttusb->fe = dvb_attach(tda10046_attach, &philips_tdm1316l_config, &ttusb->i2c_adap); - if (ttusb->fe != NULL) { - ttusb->fe->ops.tuner_ops.init = philips_tdm1316l_tuner_init; - ttusb->fe->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; - break; - } - break; - } - - if (ttusb->fe == NULL) { - printk("dvb-ttusb-budget: A frontend driver was not found for device [%04x:%04x]\n", - le16_to_cpu(ttusb->dev->descriptor.idVendor), - le16_to_cpu(ttusb->dev->descriptor.idProduct)); - } else { - if (dvb_register_frontend(&ttusb->adapter, ttusb->fe)) { - printk("dvb-ttusb-budget: Frontend registration failed!\n"); - dvb_frontend_detach(ttusb->fe); - ttusb->fe = NULL; - } - } -} - - - -static struct i2c_algorithm ttusb_dec_algo = { - .master_xfer = master_xfer, - .functionality = functionality, -}; - -static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *udev; - struct ttusb *ttusb; - int result; - - dprintk("%s: TTUSB DVB connected\n", __func__); - - udev = interface_to_usbdev(intf); - - if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV; - - if (!(ttusb = kzalloc(sizeof(struct ttusb), GFP_KERNEL))) - return -ENOMEM; - - ttusb->dev = udev; - ttusb->c = 0; - ttusb->mux_state = 0; - mutex_init(&ttusb->semi2c); - - mutex_lock(&ttusb->semi2c); - - mutex_init(&ttusb->semusb); - - ttusb_setup_interfaces(ttusb); - - result = ttusb_alloc_iso_urbs(ttusb); - if (result < 0) { - dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__); - mutex_unlock(&ttusb->semi2c); - kfree(ttusb); - return result; - } - - if (ttusb_init_controller(ttusb)) - printk("ttusb_init_controller: error\n"); - - mutex_unlock(&ttusb->semi2c); - - result = dvb_register_adapter(&ttusb->adapter, - "Technotrend/Hauppauge Nova-USB", - THIS_MODULE, &udev->dev, adapter_nr); - if (result < 0) { - ttusb_free_iso_urbs(ttusb); - kfree(ttusb); - return result; - } - ttusb->adapter.priv = ttusb; - - /* i2c */ - memset(&ttusb->i2c_adap, 0, sizeof(struct i2c_adapter)); - strcpy(ttusb->i2c_adap.name, "TTUSB DEC"); - - i2c_set_adapdata(&ttusb->i2c_adap, ttusb); - - ttusb->i2c_adap.algo = &ttusb_dec_algo; - ttusb->i2c_adap.algo_data = NULL; - ttusb->i2c_adap.dev.parent = &udev->dev; - - result = i2c_add_adapter(&ttusb->i2c_adap); - if (result) - goto err_unregister_adapter; - - memset(&ttusb->dvb_demux, 0, sizeof(ttusb->dvb_demux)); - - ttusb->dvb_demux.dmx.capabilities = - DMX_TS_FILTERING | DMX_SECTION_FILTERING; - ttusb->dvb_demux.priv = NULL; -#ifdef TTUSB_HWSECTIONS - ttusb->dvb_demux.filternum = TTUSB_MAXFILTER; -#else - ttusb->dvb_demux.filternum = 32; -#endif - ttusb->dvb_demux.feednum = TTUSB_MAXCHANNEL; - ttusb->dvb_demux.start_feed = ttusb_start_feed; - ttusb->dvb_demux.stop_feed = ttusb_stop_feed; - ttusb->dvb_demux.write_to_decoder = NULL; - - result = dvb_dmx_init(&ttusb->dvb_demux); - if (result < 0) { - printk("ttusb_dvb: dvb_dmx_init failed (errno = %d)\n", result); - result = -ENODEV; - goto err_i2c_del_adapter; - } -//FIXME dmxdev (nur WAS?) - ttusb->dmxdev.filternum = ttusb->dvb_demux.filternum; - ttusb->dmxdev.demux = &ttusb->dvb_demux.dmx; - ttusb->dmxdev.capabilities = 0; - - result = dvb_dmxdev_init(&ttusb->dmxdev, &ttusb->adapter); - if (result < 0) { - printk("ttusb_dvb: dvb_dmxdev_init failed (errno = %d)\n", - result); - result = -ENODEV; - goto err_release_dmx; - } - - if (dvb_net_init(&ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) { - printk("ttusb_dvb: dvb_net_init failed!\n"); - result = -ENODEV; - goto err_release_dmxdev; - } - - usb_set_intfdata(intf, (void *) ttusb); - - frontend_init(ttusb); - - return 0; - -err_release_dmxdev: - dvb_dmxdev_release(&ttusb->dmxdev); -err_release_dmx: - dvb_dmx_release(&ttusb->dvb_demux); -err_i2c_del_adapter: - i2c_del_adapter(&ttusb->i2c_adap); -err_unregister_adapter: - dvb_unregister_adapter (&ttusb->adapter); - return result; -} - -static void ttusb_disconnect(struct usb_interface *intf) -{ - struct ttusb *ttusb = usb_get_intfdata(intf); - - usb_set_intfdata(intf, NULL); - - ttusb->disconnecting = 1; - - ttusb_stop_iso_xfer(ttusb); - - ttusb->dvb_demux.dmx.close(&ttusb->dvb_demux.dmx); - dvb_net_release(&ttusb->dvbnet); - dvb_dmxdev_release(&ttusb->dmxdev); - dvb_dmx_release(&ttusb->dvb_demux); - if (ttusb->fe != NULL) { - dvb_unregister_frontend(ttusb->fe); - dvb_frontend_detach(ttusb->fe); - } - i2c_del_adapter(&ttusb->i2c_adap); - dvb_unregister_adapter(&ttusb->adapter); - - ttusb_free_iso_urbs(ttusb); - - kfree(ttusb); - - dprintk("%s: TTUSB DVB disconnected\n", __func__); -} - -static struct usb_device_id ttusb_table[] = { - {USB_DEVICE(0xb48, 0x1003)}, - {USB_DEVICE(0xb48, 0x1004)}, - {USB_DEVICE(0xb48, 0x1005)}, - {} -}; - -MODULE_DEVICE_TABLE(usb, ttusb_table); - -static struct usb_driver ttusb_driver = { - .name = "ttusb", - .probe = ttusb_probe, - .disconnect = ttusb_disconnect, - .id_table = ttusb_table, -}; - -module_usb_driver(ttusb_driver); - -MODULE_AUTHOR("Holger Waechtler <holger@convergence.de>"); -MODULE_DESCRIPTION("TTUSB DVB Driver"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("ttusb-budget/dspbootcode.bin"); diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig deleted file mode 100644 index 290254ab06db..000000000000 --- a/drivers/media/dvb/ttusb-dec/Kconfig +++ /dev/null @@ -1,21 +0,0 @@ -config DVB_TTUSB_DEC - tristate "Technotrend/Hauppauge USB DEC devices" - depends on DVB_CORE && USB && INPUT && PCI - select CRC32 - help - Support for external USB adapters designed by Technotrend and - produced by Hauppauge, shipped under the brand name 'DEC2000-t' - and 'DEC3000-s'. - - Even if these devices have a MPEG decoder built in, they transmit - only compressed MPEG data over the USB bus, so you need - an external software decoder to watch TV on your computer. - - This driver needs external firmware. Please use the commands - "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2000t", - "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2540t", - "<kerneldir>/Documentation/dvb/get_dvb_firmware dec3000s", - download/extract them, and then copy them to /usr/lib/hotplug/firmware - or /lib/firmware (depending on configuration of firmware hotplug). - - Say Y if you own such a device and want to use it. diff --git a/drivers/media/dvb/ttusb-dec/Makefile b/drivers/media/dvb/ttusb-dec/Makefile deleted file mode 100644 index 5352740d2353..000000000000 --- a/drivers/media/dvb/ttusb-dec/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DVB_TTUSB_DEC) += ttusb_dec.o ttusbdecfe.o - -ccflags-y += -Idrivers/media/dvb-core/ diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c deleted file mode 100644 index 504c81230339..000000000000 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ /dev/null @@ -1,1764 +0,0 @@ -/* - * TTUSB DEC Driver - * - * Copyright (C) 2003-2004 Alex Woods <linux-dvb@giblets.org> - * IR support by Peter Beutner <p.beutner@gmx.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/list.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/usb.h> -#include <linux/interrupt.h> -#include <linux/firmware.h> -#include <linux/crc32.h> -#include <linux/init.h> -#include <linux/input.h> - -#include <linux/mutex.h> - -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_filter.h" -#include "dvb_frontend.h" -#include "dvb_net.h" -#include "ttusbdecfe.h" - -static int debug; -static int output_pva; -static int enable_rc; - -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); -module_param(output_pva, int, 0444); -MODULE_PARM_DESC(output_pva, "Output PVA from dvr device (default:off)"); -module_param(enable_rc, int, 0644); -MODULE_PARM_DESC(enable_rc, "Turn on/off IR remote control(default: off)"); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -#define dprintk if (debug) printk - -#define DRIVER_NAME "TechnoTrend/Hauppauge DEC USB" - -#define COMMAND_PIPE 0x03 -#define RESULT_PIPE 0x04 -#define IN_PIPE 0x08 -#define OUT_PIPE 0x07 -#define IRQ_PIPE 0x0A - -#define COMMAND_PACKET_SIZE 0x3c -#define ARM_PACKET_SIZE 0x1000 -#define IRQ_PACKET_SIZE 0x8 - -#define ISO_BUF_COUNT 0x04 -#define FRAMES_PER_ISO_BUF 0x04 -#define ISO_FRAME_SIZE 0x0380 - -#define MAX_PVA_LENGTH 6144 - -enum ttusb_dec_model { - TTUSB_DEC2000T, - TTUSB_DEC2540T, - TTUSB_DEC3000S -}; - -enum ttusb_dec_packet_type { - TTUSB_DEC_PACKET_PVA, - TTUSB_DEC_PACKET_SECTION, - TTUSB_DEC_PACKET_EMPTY -}; - -enum ttusb_dec_interface { - TTUSB_DEC_INTERFACE_INITIAL, - TTUSB_DEC_INTERFACE_IN, - TTUSB_DEC_INTERFACE_OUT -}; - -struct ttusb_dec { - enum ttusb_dec_model model; - char *model_name; - char *firmware_name; - int can_playback; - - /* DVB bits */ - struct dvb_adapter adapter; - struct dmxdev dmxdev; - struct dvb_demux demux; - struct dmx_frontend frontend; - struct dvb_net dvb_net; - struct dvb_frontend* fe; - - u16 pid[DMX_PES_OTHER]; - - /* USB bits */ - struct usb_device *udev; - u8 trans_count; - unsigned int command_pipe; - unsigned int result_pipe; - unsigned int in_pipe; - unsigned int out_pipe; - unsigned int irq_pipe; - enum ttusb_dec_interface interface; - struct mutex usb_mutex; - - void *irq_buffer; - struct urb *irq_urb; - dma_addr_t irq_dma_handle; - void *iso_buffer; - dma_addr_t iso_dma_handle; - struct urb *iso_urb[ISO_BUF_COUNT]; - int iso_stream_count; - struct mutex iso_mutex; - - u8 packet[MAX_PVA_LENGTH + 4]; - enum ttusb_dec_packet_type packet_type; - int packet_state; - int packet_length; - int packet_payload_length; - u16 next_packet_id; - - int pva_stream_count; - int filter_stream_count; - - struct dvb_filter_pes2ts a_pes2ts; - struct dvb_filter_pes2ts v_pes2ts; - - u8 v_pes[16 + MAX_PVA_LENGTH]; - int v_pes_length; - int v_pes_postbytes; - - struct list_head urb_frame_list; - struct tasklet_struct urb_tasklet; - spinlock_t urb_frame_list_lock; - - struct dvb_demux_filter *audio_filter; - struct dvb_demux_filter *video_filter; - struct list_head filter_info_list; - spinlock_t filter_info_list_lock; - - struct input_dev *rc_input_dev; - char rc_phys[64]; - - int active; /* Loaded successfully */ -}; - -struct urb_frame { - u8 data[ISO_FRAME_SIZE]; - int length; - struct list_head urb_frame_list; -}; - -struct filter_info { - u8 stream_id; - struct dvb_demux_filter *filter; - struct list_head filter_info_list; -}; - -static u16 rc_keys[] = { - KEY_POWER, - KEY_MUTE, - KEY_1, - KEY_2, - KEY_3, - KEY_4, - KEY_5, - KEY_6, - KEY_7, - KEY_8, - KEY_9, - KEY_0, - KEY_CHANNELUP, - KEY_VOLUMEDOWN, - KEY_OK, - KEY_VOLUMEUP, - KEY_CHANNELDOWN, - KEY_PREVIOUS, - KEY_ESC, - KEY_RED, - KEY_GREEN, - KEY_YELLOW, - KEY_BLUE, - KEY_OPTION, - KEY_M, - KEY_RADIO -}; - -static void ttusb_dec_set_model(struct ttusb_dec *dec, - enum ttusb_dec_model model); - -static void ttusb_dec_handle_irq( struct urb *urb) -{ - struct ttusb_dec * dec = urb->context; - char *buffer = dec->irq_buffer; - int retval; - - switch(urb->status) { - case 0: /*success*/ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - case -ETIME: - /* this urb is dead, cleanup */ - dprintk("%s:urb shutting down with status: %d\n", - __func__, urb->status); - return; - default: - dprintk("%s:nonzero status received: %d\n", - __func__,urb->status); - goto exit; - } - - if( (buffer[0] == 0x1) && (buffer[2] == 0x15) ) { - /* IR - Event */ - /* this is an fact a bit too simple implementation; - * the box also reports a keyrepeat signal - * (with buffer[3] == 0x40) in an intervall of ~100ms. - * But to handle this correctly we had to imlemenent some - * kind of timer which signals a 'key up' event if no - * keyrepeat signal is received for lets say 200ms. - * this should/could be added later ... - * for now lets report each signal as a key down and up*/ - dprintk("%s:rc signal:%d\n", __func__, buffer[4]); - input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1); - input_sync(dec->rc_input_dev); - input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0); - input_sync(dec->rc_input_dev); - } - -exit: retval = usb_submit_urb(urb, GFP_ATOMIC); - if(retval) - printk("%s - usb_commit_urb failed with result: %d\n", - __func__, retval); -} - -static u16 crc16(u16 crc, const u8 *buf, size_t len) -{ - u16 tmp; - - while (len--) { - crc ^= *buf++; - crc ^= (u8)crc >> 4; - tmp = (u8)crc; - crc ^= (tmp ^ (tmp << 1)) << 4; - } - return crc; -} - -static int ttusb_dec_send_command(struct ttusb_dec *dec, const u8 command, - int param_length, const u8 params[], - int *result_length, u8 cmd_result[]) -{ - int result, actual_len, i; - u8 *b; - - dprintk("%s\n", __func__); - - b = kmalloc(COMMAND_PACKET_SIZE + 4, GFP_KERNEL); - if (!b) - return -ENOMEM; - - if ((result = mutex_lock_interruptible(&dec->usb_mutex))) { - kfree(b); - printk("%s: Failed to lock usb mutex.\n", __func__); - return result; - } - - b[0] = 0xaa; - b[1] = ++dec->trans_count; - b[2] = command; - b[3] = param_length; - - if (params) - memcpy(&b[4], params, param_length); - - if (debug) { - printk("%s: command: ", __func__); - for (i = 0; i < param_length + 4; i++) - printk("0x%02X ", b[i]); - printk("\n"); - } - - result = usb_bulk_msg(dec->udev, dec->command_pipe, b, - COMMAND_PACKET_SIZE + 4, &actual_len, 1000); - - if (result) { - printk("%s: command bulk message failed: error %d\n", - __func__, result); - mutex_unlock(&dec->usb_mutex); - kfree(b); - return result; - } - - result = usb_bulk_msg(dec->udev, dec->result_pipe, b, - COMMAND_PACKET_SIZE + 4, &actual_len, 1000); - - if (result) { - printk("%s: result bulk message failed: error %d\n", - __func__, result); - mutex_unlock(&dec->usb_mutex); - kfree(b); - return result; - } else { - if (debug) { - printk("%s: result: ", __func__); - for (i = 0; i < actual_len; i++) - printk("0x%02X ", b[i]); - printk("\n"); - } - - if (result_length) - *result_length = b[3]; - if (cmd_result && b[3] > 0) - memcpy(cmd_result, &b[4], b[3]); - - mutex_unlock(&dec->usb_mutex); - - kfree(b); - return 0; - } -} - -static int ttusb_dec_get_stb_state (struct ttusb_dec *dec, unsigned int *mode, - unsigned int *model, unsigned int *version) -{ - u8 c[COMMAND_PACKET_SIZE]; - int c_length; - int result; - __be32 tmp; - - dprintk("%s\n", __func__); - - result = ttusb_dec_send_command(dec, 0x08, 0, NULL, &c_length, c); - if (result) - return result; - - if (c_length >= 0x0c) { - if (mode != NULL) { - memcpy(&tmp, c, 4); - *mode = ntohl(tmp); - } - if (model != NULL) { - memcpy(&tmp, &c[4], 4); - *model = ntohl(tmp); - } - if (version != NULL) { - memcpy(&tmp, &c[8], 4); - *version = ntohl(tmp); - } - return 0; - } else { - return -1; - } -} - -static int ttusb_dec_audio_pes2ts_cb(void *priv, unsigned char *data) -{ - struct ttusb_dec *dec = priv; - - dec->audio_filter->feed->cb.ts(data, 188, NULL, 0, - &dec->audio_filter->feed->feed.ts, - DMX_OK); - - return 0; -} - -static int ttusb_dec_video_pes2ts_cb(void *priv, unsigned char *data) -{ - struct ttusb_dec *dec = priv; - - dec->video_filter->feed->cb.ts(data, 188, NULL, 0, - &dec->video_filter->feed->feed.ts, - DMX_OK); - - return 0; -} - -static void ttusb_dec_set_pids(struct ttusb_dec *dec) -{ - u8 b[] = { 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff }; - - __be16 pcr = htons(dec->pid[DMX_PES_PCR]); - __be16 audio = htons(dec->pid[DMX_PES_AUDIO]); - __be16 video = htons(dec->pid[DMX_PES_VIDEO]); - - dprintk("%s\n", __func__); - - memcpy(&b[0], &pcr, 2); - memcpy(&b[2], &audio, 2); - memcpy(&b[4], &video, 2); - - ttusb_dec_send_command(dec, 0x50, sizeof(b), b, NULL, NULL); - - dvb_filter_pes2ts_init(&dec->a_pes2ts, dec->pid[DMX_PES_AUDIO], - ttusb_dec_audio_pes2ts_cb, dec); - dvb_filter_pes2ts_init(&dec->v_pes2ts, dec->pid[DMX_PES_VIDEO], - ttusb_dec_video_pes2ts_cb, dec); - dec->v_pes_length = 0; - dec->v_pes_postbytes = 0; -} - -static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) -{ - if (length < 8) { - printk("%s: packet too short - discarding\n", __func__); - return; - } - - if (length > 8 + MAX_PVA_LENGTH) { - printk("%s: packet too long - discarding\n", __func__); - return; - } - - switch (pva[2]) { - - case 0x01: { /* VideoStream */ - int prebytes = pva[5] & 0x03; - int postbytes = (pva[5] & 0x0c) >> 2; - __be16 v_pes_payload_length; - - if (output_pva) { - dec->video_filter->feed->cb.ts(pva, length, NULL, 0, - &dec->video_filter->feed->feed.ts, DMX_OK); - return; - } - - if (dec->v_pes_postbytes > 0 && - dec->v_pes_postbytes == prebytes) { - memcpy(&dec->v_pes[dec->v_pes_length], - &pva[12], prebytes); - - dvb_filter_pes2ts(&dec->v_pes2ts, dec->v_pes, - dec->v_pes_length + prebytes, 1); - } - - if (pva[5] & 0x10) { - dec->v_pes[7] = 0x80; - dec->v_pes[8] = 0x05; - - dec->v_pes[9] = 0x21 | ((pva[8] & 0xc0) >> 5); - dec->v_pes[10] = ((pva[8] & 0x3f) << 2) | - ((pva[9] & 0xc0) >> 6); - dec->v_pes[11] = 0x01 | - ((pva[9] & 0x3f) << 2) | - ((pva[10] & 0x80) >> 6); - dec->v_pes[12] = ((pva[10] & 0x7f) << 1) | - ((pva[11] & 0xc0) >> 7); - dec->v_pes[13] = 0x01 | ((pva[11] & 0x7f) << 1); - - memcpy(&dec->v_pes[14], &pva[12 + prebytes], - length - 12 - prebytes); - dec->v_pes_length = 14 + length - 12 - prebytes; - } else { - dec->v_pes[7] = 0x00; - dec->v_pes[8] = 0x00; - - memcpy(&dec->v_pes[9], &pva[8], length - 8); - dec->v_pes_length = 9 + length - 8; - } - - dec->v_pes_postbytes = postbytes; - - if (dec->v_pes[9 + dec->v_pes[8]] == 0x00 && - dec->v_pes[10 + dec->v_pes[8]] == 0x00 && - dec->v_pes[11 + dec->v_pes[8]] == 0x01) - dec->v_pes[6] = 0x84; - else - dec->v_pes[6] = 0x80; - - v_pes_payload_length = htons(dec->v_pes_length - 6 + - postbytes); - memcpy(&dec->v_pes[4], &v_pes_payload_length, 2); - - if (postbytes == 0) - dvb_filter_pes2ts(&dec->v_pes2ts, dec->v_pes, - dec->v_pes_length, 1); - - break; - } - - case 0x02: /* MainAudioStream */ - if (output_pva) { - dec->audio_filter->feed->cb.ts(pva, length, NULL, 0, - &dec->audio_filter->feed->feed.ts, DMX_OK); - return; - } - - dvb_filter_pes2ts(&dec->a_pes2ts, &pva[8], length - 8, - pva[5] & 0x10); - break; - - default: - printk("%s: unknown PVA type: %02x.\n", __func__, - pva[2]); - break; - } -} - -static void ttusb_dec_process_filter(struct ttusb_dec *dec, u8 *packet, - int length) -{ - struct list_head *item; - struct filter_info *finfo; - struct dvb_demux_filter *filter = NULL; - unsigned long flags; - u8 sid; - - sid = packet[1]; - spin_lock_irqsave(&dec->filter_info_list_lock, flags); - for (item = dec->filter_info_list.next; item != &dec->filter_info_list; - item = item->next) { - finfo = list_entry(item, struct filter_info, filter_info_list); - if (finfo->stream_id == sid) { - filter = finfo->filter; - break; - } - } - spin_unlock_irqrestore(&dec->filter_info_list_lock, flags); - - if (filter) - filter->feed->cb.sec(&packet[2], length - 2, NULL, 0, - &filter->filter, DMX_OK); -} - -static void ttusb_dec_process_packet(struct ttusb_dec *dec) -{ - int i; - u16 csum = 0; - u16 packet_id; - - if (dec->packet_length % 2) { - printk("%s: odd sized packet - discarding\n", __func__); - return; - } - - for (i = 0; i < dec->packet_length; i += 2) - csum ^= ((dec->packet[i] << 8) + dec->packet[i + 1]); - - if (csum) { - printk("%s: checksum failed - discarding\n", __func__); - return; - } - - packet_id = dec->packet[dec->packet_length - 4] << 8; - packet_id += dec->packet[dec->packet_length - 3]; - - if ((packet_id != dec->next_packet_id) && dec->next_packet_id) { - printk("%s: warning: lost packets between %u and %u\n", - __func__, dec->next_packet_id - 1, packet_id); - } - - if (packet_id == 0xffff) - dec->next_packet_id = 0x8000; - else - dec->next_packet_id = packet_id + 1; - - switch (dec->packet_type) { - case TTUSB_DEC_PACKET_PVA: - if (dec->pva_stream_count) - ttusb_dec_process_pva(dec, dec->packet, - dec->packet_payload_length); - break; - - case TTUSB_DEC_PACKET_SECTION: - if (dec->filter_stream_count) - ttusb_dec_process_filter(dec, dec->packet, - dec->packet_payload_length); - break; - - case TTUSB_DEC_PACKET_EMPTY: - break; - } -} - -static void swap_bytes(u8 *b, int length) -{ - u8 c; - - length -= length % 2; - for (; length; b += 2, length -= 2) { - c = *b; - *b = *(b + 1); - *(b + 1) = c; - } -} - -static void ttusb_dec_process_urb_frame(struct ttusb_dec *dec, u8 *b, - int length) -{ - swap_bytes(b, length); - - while (length) { - switch (dec->packet_state) { - - case 0: - case 1: - case 2: - if (*b++ == 0xaa) - dec->packet_state++; - else - dec->packet_state = 0; - - length--; - break; - - case 3: - if (*b == 0x00) { - dec->packet_state++; - dec->packet_length = 0; - } else if (*b != 0xaa) { - dec->packet_state = 0; - } - - b++; - length--; - break; - - case 4: - dec->packet[dec->packet_length++] = *b++; - - if (dec->packet_length == 2) { - if (dec->packet[0] == 'A' && - dec->packet[1] == 'V') { - dec->packet_type = - TTUSB_DEC_PACKET_PVA; - dec->packet_state++; - } else if (dec->packet[0] == 'S') { - dec->packet_type = - TTUSB_DEC_PACKET_SECTION; - dec->packet_state++; - } else if (dec->packet[0] == 0x00) { - dec->packet_type = - TTUSB_DEC_PACKET_EMPTY; - dec->packet_payload_length = 2; - dec->packet_state = 7; - } else { - printk("%s: unknown packet type: " - "%02x%02x\n", __func__, - dec->packet[0], dec->packet[1]); - dec->packet_state = 0; - } - } - - length--; - break; - - case 5: - dec->packet[dec->packet_length++] = *b++; - - if (dec->packet_type == TTUSB_DEC_PACKET_PVA && - dec->packet_length == 8) { - dec->packet_state++; - dec->packet_payload_length = 8 + - (dec->packet[6] << 8) + - dec->packet[7]; - } else if (dec->packet_type == - TTUSB_DEC_PACKET_SECTION && - dec->packet_length == 5) { - dec->packet_state++; - dec->packet_payload_length = 5 + - ((dec->packet[3] & 0x0f) << 8) + - dec->packet[4]; - } - - length--; - break; - - case 6: { - int remainder = dec->packet_payload_length - - dec->packet_length; - - if (length >= remainder) { - memcpy(dec->packet + dec->packet_length, - b, remainder); - dec->packet_length += remainder; - b += remainder; - length -= remainder; - dec->packet_state++; - } else { - memcpy(&dec->packet[dec->packet_length], - b, length); - dec->packet_length += length; - length = 0; - } - - break; - } - - case 7: { - int tail = 4; - - dec->packet[dec->packet_length++] = *b++; - - if (dec->packet_type == TTUSB_DEC_PACKET_SECTION && - dec->packet_payload_length % 2) - tail++; - - if (dec->packet_length == - dec->packet_payload_length + tail) { - ttusb_dec_process_packet(dec); - dec->packet_state = 0; - } - - length--; - break; - } - - default: - printk("%s: illegal packet state encountered.\n", - __func__); - dec->packet_state = 0; - } - } -} - -static void ttusb_dec_process_urb_frame_list(unsigned long data) -{ - struct ttusb_dec *dec = (struct ttusb_dec *)data; - struct list_head *item; - struct urb_frame *frame; - unsigned long flags; - - while (1) { - spin_lock_irqsave(&dec->urb_frame_list_lock, flags); - if ((item = dec->urb_frame_list.next) != &dec->urb_frame_list) { - frame = list_entry(item, struct urb_frame, - urb_frame_list); - list_del(&frame->urb_frame_list); - } else { - spin_unlock_irqrestore(&dec->urb_frame_list_lock, - flags); - return; - } - spin_unlock_irqrestore(&dec->urb_frame_list_lock, flags); - - ttusb_dec_process_urb_frame(dec, frame->data, frame->length); - kfree(frame); - } -} - -static void ttusb_dec_process_urb(struct urb *urb) -{ - struct ttusb_dec *dec = urb->context; - - if (!urb->status) { - int i; - - for (i = 0; i < FRAMES_PER_ISO_BUF; i++) { - struct usb_iso_packet_descriptor *d; - u8 *b; - int length; - struct urb_frame *frame; - - d = &urb->iso_frame_desc[i]; - b = urb->transfer_buffer + d->offset; - length = d->actual_length; - - if ((frame = kmalloc(sizeof(struct urb_frame), - GFP_ATOMIC))) { - unsigned long flags; - - memcpy(frame->data, b, length); - frame->length = length; - - spin_lock_irqsave(&dec->urb_frame_list_lock, - flags); - list_add_tail(&frame->urb_frame_list, - &dec->urb_frame_list); - spin_unlock_irqrestore(&dec->urb_frame_list_lock, - flags); - - tasklet_schedule(&dec->urb_tasklet); - } - } - } else { - /* -ENOENT is expected when unlinking urbs */ - if (urb->status != -ENOENT) - dprintk("%s: urb error: %d\n", __func__, - urb->status); - } - - if (dec->iso_stream_count) - usb_submit_urb(urb, GFP_ATOMIC); -} - -static void ttusb_dec_setup_urbs(struct ttusb_dec *dec) -{ - int i, j, buffer_offset = 0; - - dprintk("%s\n", __func__); - - for (i = 0; i < ISO_BUF_COUNT; i++) { - int frame_offset = 0; - struct urb *urb = dec->iso_urb[i]; - - urb->dev = dec->udev; - urb->context = dec; - urb->complete = ttusb_dec_process_urb; - urb->pipe = dec->in_pipe; - urb->transfer_flags = URB_ISO_ASAP; - urb->interval = 1; - urb->number_of_packets = FRAMES_PER_ISO_BUF; - urb->transfer_buffer_length = ISO_FRAME_SIZE * - FRAMES_PER_ISO_BUF; - urb->transfer_buffer = dec->iso_buffer + buffer_offset; - buffer_offset += ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF; - - for (j = 0; j < FRAMES_PER_ISO_BUF; j++) { - urb->iso_frame_desc[j].offset = frame_offset; - urb->iso_frame_desc[j].length = ISO_FRAME_SIZE; - frame_offset += ISO_FRAME_SIZE; - } - } -} - -static void ttusb_dec_stop_iso_xfer(struct ttusb_dec *dec) -{ - int i; - - dprintk("%s\n", __func__); - - if (mutex_lock_interruptible(&dec->iso_mutex)) - return; - - dec->iso_stream_count--; - - if (!dec->iso_stream_count) { - for (i = 0; i < ISO_BUF_COUNT; i++) - usb_kill_urb(dec->iso_urb[i]); - } - - mutex_unlock(&dec->iso_mutex); -} - -/* Setting the interface of the DEC tends to take down the USB communications - * for a short period, so it's important not to call this function just before - * trying to talk to it. - */ -static int ttusb_dec_set_interface(struct ttusb_dec *dec, - enum ttusb_dec_interface interface) -{ - int result = 0; - u8 b[] = { 0x05 }; - - if (interface != dec->interface) { - switch (interface) { - case TTUSB_DEC_INTERFACE_INITIAL: - result = usb_set_interface(dec->udev, 0, 0); - break; - case TTUSB_DEC_INTERFACE_IN: - result = ttusb_dec_send_command(dec, 0x80, sizeof(b), - b, NULL, NULL); - if (result) - return result; - result = usb_set_interface(dec->udev, 0, 8); - break; - case TTUSB_DEC_INTERFACE_OUT: - result = usb_set_interface(dec->udev, 0, 1); - break; - } - - if (result) - return result; - - dec->interface = interface; - } - - return 0; -} - -static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec) -{ - int i, result; - - dprintk("%s\n", __func__); - - if (mutex_lock_interruptible(&dec->iso_mutex)) - return -EAGAIN; - - if (!dec->iso_stream_count) { - ttusb_dec_setup_urbs(dec); - - dec->packet_state = 0; - dec->v_pes_postbytes = 0; - dec->next_packet_id = 0; - - for (i = 0; i < ISO_BUF_COUNT; i++) { - if ((result = usb_submit_urb(dec->iso_urb[i], - GFP_ATOMIC))) { - printk("%s: failed urb submission %d: " - "error %d\n", __func__, i, result); - - while (i) { - usb_kill_urb(dec->iso_urb[i - 1]); - i--; - } - - mutex_unlock(&dec->iso_mutex); - return result; - } - } - } - - dec->iso_stream_count++; - - mutex_unlock(&dec->iso_mutex); - - return 0; -} - -static int ttusb_dec_start_ts_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *dvbdmx = dvbdmxfeed->demux; - struct ttusb_dec *dec = dvbdmx->priv; - u8 b0[] = { 0x05 }; - int result = 0; - - dprintk("%s\n", __func__); - - dprintk(" ts_type:"); - - if (dvbdmxfeed->ts_type & TS_DECODER) - dprintk(" TS_DECODER"); - - if (dvbdmxfeed->ts_type & TS_PACKET) - dprintk(" TS_PACKET"); - - if (dvbdmxfeed->ts_type & TS_PAYLOAD_ONLY) - dprintk(" TS_PAYLOAD_ONLY"); - - dprintk("\n"); - - switch (dvbdmxfeed->pes_type) { - - case DMX_TS_PES_VIDEO: - dprintk(" pes_type: DMX_TS_PES_VIDEO\n"); - dec->pid[DMX_PES_PCR] = dvbdmxfeed->pid; - dec->pid[DMX_PES_VIDEO] = dvbdmxfeed->pid; - dec->video_filter = dvbdmxfeed->filter; - ttusb_dec_set_pids(dec); - break; - - case DMX_TS_PES_AUDIO: - dprintk(" pes_type: DMX_TS_PES_AUDIO\n"); - dec->pid[DMX_PES_AUDIO] = dvbdmxfeed->pid; - dec->audio_filter = dvbdmxfeed->filter; - ttusb_dec_set_pids(dec); - break; - - case DMX_TS_PES_TELETEXT: - dec->pid[DMX_PES_TELETEXT] = dvbdmxfeed->pid; - dprintk(" pes_type: DMX_TS_PES_TELETEXT(not supported)\n"); - return -ENOSYS; - - case DMX_TS_PES_PCR: - dprintk(" pes_type: DMX_TS_PES_PCR\n"); - dec->pid[DMX_PES_PCR] = dvbdmxfeed->pid; - ttusb_dec_set_pids(dec); - break; - - case DMX_TS_PES_OTHER: - dprintk(" pes_type: DMX_TS_PES_OTHER(not supported)\n"); - return -ENOSYS; - - default: - dprintk(" pes_type: unknown (%d)\n", dvbdmxfeed->pes_type); - return -EINVAL; - - } - - result = ttusb_dec_send_command(dec, 0x80, sizeof(b0), b0, NULL, NULL); - if (result) - return result; - - dec->pva_stream_count++; - return ttusb_dec_start_iso_xfer(dec); -} - -static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct ttusb_dec *dec = dvbdmxfeed->demux->priv; - u8 b0[] = { 0x00, 0x00, 0x00, 0x01, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0xff, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00 }; - __be16 pid; - u8 c[COMMAND_PACKET_SIZE]; - int c_length; - int result; - struct filter_info *finfo; - unsigned long flags; - u8 x = 1; - - dprintk("%s\n", __func__); - - pid = htons(dvbdmxfeed->pid); - memcpy(&b0[0], &pid, 2); - memcpy(&b0[4], &x, 1); - memcpy(&b0[5], &dvbdmxfeed->filter->filter.filter_value[0], 1); - - result = ttusb_dec_send_command(dec, 0x60, sizeof(b0), b0, - &c_length, c); - - if (!result) { - if (c_length == 2) { - if (!(finfo = kmalloc(sizeof(struct filter_info), - GFP_ATOMIC))) - return -ENOMEM; - - finfo->stream_id = c[1]; - finfo->filter = dvbdmxfeed->filter; - - spin_lock_irqsave(&dec->filter_info_list_lock, flags); - list_add_tail(&finfo->filter_info_list, - &dec->filter_info_list); - spin_unlock_irqrestore(&dec->filter_info_list_lock, - flags); - - dvbdmxfeed->priv = finfo; - - dec->filter_stream_count++; - return ttusb_dec_start_iso_xfer(dec); - } - - return -EAGAIN; - } else - return result; -} - -static int ttusb_dec_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *dvbdmx = dvbdmxfeed->demux; - - dprintk("%s\n", __func__); - - if (!dvbdmx->dmx.frontend) - return -EINVAL; - - dprintk(" pid: 0x%04X\n", dvbdmxfeed->pid); - - switch (dvbdmxfeed->type) { - - case DMX_TYPE_TS: - return ttusb_dec_start_ts_feed(dvbdmxfeed); - break; - - case DMX_TYPE_SEC: - return ttusb_dec_start_sec_feed(dvbdmxfeed); - break; - - default: - dprintk(" type: unknown (%d)\n", dvbdmxfeed->type); - return -EINVAL; - - } -} - -static int ttusb_dec_stop_ts_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct ttusb_dec *dec = dvbdmxfeed->demux->priv; - u8 b0[] = { 0x00 }; - - ttusb_dec_send_command(dec, 0x81, sizeof(b0), b0, NULL, NULL); - - dec->pva_stream_count--; - - ttusb_dec_stop_iso_xfer(dec); - - return 0; -} - -static int ttusb_dec_stop_sec_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct ttusb_dec *dec = dvbdmxfeed->demux->priv; - u8 b0[] = { 0x00, 0x00 }; - struct filter_info *finfo = (struct filter_info *)dvbdmxfeed->priv; - unsigned long flags; - - b0[1] = finfo->stream_id; - spin_lock_irqsave(&dec->filter_info_list_lock, flags); - list_del(&finfo->filter_info_list); - spin_unlock_irqrestore(&dec->filter_info_list_lock, flags); - kfree(finfo); - ttusb_dec_send_command(dec, 0x62, sizeof(b0), b0, NULL, NULL); - - dec->filter_stream_count--; - - ttusb_dec_stop_iso_xfer(dec); - - return 0; -} - -static int ttusb_dec_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - dprintk("%s\n", __func__); - - switch (dvbdmxfeed->type) { - case DMX_TYPE_TS: - return ttusb_dec_stop_ts_feed(dvbdmxfeed); - break; - - case DMX_TYPE_SEC: - return ttusb_dec_stop_sec_feed(dvbdmxfeed); - break; - } - - return 0; -} - -static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec) -{ - int i; - - dprintk("%s\n", __func__); - - for (i = 0; i < ISO_BUF_COUNT; i++) - usb_free_urb(dec->iso_urb[i]); - - pci_free_consistent(NULL, - ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * - ISO_BUF_COUNT), - dec->iso_buffer, dec->iso_dma_handle); -} - -static int ttusb_dec_alloc_iso_urbs(struct ttusb_dec *dec) -{ - int i; - - dprintk("%s\n", __func__); - - dec->iso_buffer = pci_alloc_consistent(NULL, - ISO_FRAME_SIZE * - (FRAMES_PER_ISO_BUF * - ISO_BUF_COUNT), - &dec->iso_dma_handle); - - if (!dec->iso_buffer) { - dprintk("%s: pci_alloc_consistent - not enough memory\n", - __func__); - return -ENOMEM; - } - - memset(dec->iso_buffer, 0, - ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT)); - - for (i = 0; i < ISO_BUF_COUNT; i++) { - struct urb *urb; - - if (!(urb = usb_alloc_urb(FRAMES_PER_ISO_BUF, GFP_ATOMIC))) { - ttusb_dec_free_iso_urbs(dec); - return -ENOMEM; - } - - dec->iso_urb[i] = urb; - } - - ttusb_dec_setup_urbs(dec); - - return 0; -} - -static void ttusb_dec_init_tasklet(struct ttusb_dec *dec) -{ - spin_lock_init(&dec->urb_frame_list_lock); - INIT_LIST_HEAD(&dec->urb_frame_list); - tasklet_init(&dec->urb_tasklet, ttusb_dec_process_urb_frame_list, - (unsigned long)dec); -} - -static int ttusb_init_rc( struct ttusb_dec *dec) -{ - struct input_dev *input_dev; - u8 b[] = { 0x00, 0x01 }; - int i; - int err; - - usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys)); - strlcat(dec->rc_phys, "/input0", sizeof(dec->rc_phys)); - - input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; - - input_dev->name = "ttusb_dec remote control"; - input_dev->phys = dec->rc_phys; - input_dev->evbit[0] = BIT_MASK(EV_KEY); - input_dev->keycodesize = sizeof(u16); - input_dev->keycodemax = 0x1a; - input_dev->keycode = rc_keys; - - for (i = 0; i < ARRAY_SIZE(rc_keys); i++) - set_bit(rc_keys[i], input_dev->keybit); - - err = input_register_device(input_dev); - if (err) { - input_free_device(input_dev); - return err; - } - - dec->rc_input_dev = input_dev; - if (usb_submit_urb(dec->irq_urb, GFP_KERNEL)) - printk("%s: usb_submit_urb failed\n",__func__); - /* enable irq pipe */ - ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL); - - return 0; -} - -static void ttusb_dec_init_v_pes(struct ttusb_dec *dec) -{ - dprintk("%s\n", __func__); - - dec->v_pes[0] = 0x00; - dec->v_pes[1] = 0x00; - dec->v_pes[2] = 0x01; - dec->v_pes[3] = 0xe0; -} - -static int ttusb_dec_init_usb(struct ttusb_dec *dec) -{ - dprintk("%s\n", __func__); - - mutex_init(&dec->usb_mutex); - mutex_init(&dec->iso_mutex); - - dec->command_pipe = usb_sndbulkpipe(dec->udev, COMMAND_PIPE); - dec->result_pipe = usb_rcvbulkpipe(dec->udev, RESULT_PIPE); - dec->in_pipe = usb_rcvisocpipe(dec->udev, IN_PIPE); - dec->out_pipe = usb_sndisocpipe(dec->udev, OUT_PIPE); - dec->irq_pipe = usb_rcvintpipe(dec->udev, IRQ_PIPE); - - if(enable_rc) { - dec->irq_urb = usb_alloc_urb(0, GFP_KERNEL); - if(!dec->irq_urb) { - return -ENOMEM; - } - dec->irq_buffer = usb_alloc_coherent(dec->udev,IRQ_PACKET_SIZE, - GFP_ATOMIC, &dec->irq_dma_handle); - if(!dec->irq_buffer) { - usb_free_urb(dec->irq_urb); - return -ENOMEM; - } - usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe, - dec->irq_buffer, IRQ_PACKET_SIZE, - ttusb_dec_handle_irq, dec, 1); - dec->irq_urb->transfer_dma = dec->irq_dma_handle; - dec->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - } - - return ttusb_dec_alloc_iso_urbs(dec); -} - -static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) -{ - int i, j, actual_len, result, size, trans_count; - u8 b0[] = { 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x61, 0x00 }; - u8 b1[] = { 0x61 }; - u8 *b; - char idstring[21]; - const u8 *firmware = NULL; - size_t firmware_size = 0; - u16 firmware_csum = 0; - __be16 firmware_csum_ns; - __be32 firmware_size_nl; - u32 crc32_csum, crc32_check; - __be32 tmp; - const struct firmware *fw_entry = NULL; - - dprintk("%s\n", __func__); - - if (request_firmware(&fw_entry, dec->firmware_name, &dec->udev->dev)) { - printk(KERN_ERR "%s: Firmware (%s) unavailable.\n", - __func__, dec->firmware_name); - return 1; - } - - firmware = fw_entry->data; - firmware_size = fw_entry->size; - - if (firmware_size < 60) { - printk("%s: firmware size too small for DSP code (%zu < 60).\n", - __func__, firmware_size); - release_firmware(fw_entry); - return -1; - } - - /* a 32 bit checksum over the first 56 bytes of the DSP Code is stored - at offset 56 of file, so use it to check if the firmware file is - valid. */ - crc32_csum = crc32(~0L, firmware, 56) ^ ~0L; - memcpy(&tmp, &firmware[56], 4); - crc32_check = ntohl(tmp); - if (crc32_csum != crc32_check) { - printk("%s: crc32 check of DSP code failed (calculated " - "0x%08x != 0x%08x in file), file invalid.\n", - __func__, crc32_csum, crc32_check); - release_firmware(fw_entry); - return -1; - } - memcpy(idstring, &firmware[36], 20); - idstring[20] = '\0'; - printk(KERN_INFO "ttusb_dec: found DSP code \"%s\".\n", idstring); - - firmware_size_nl = htonl(firmware_size); - memcpy(b0, &firmware_size_nl, 4); - firmware_csum = crc16(~0, firmware, firmware_size) ^ ~0; - firmware_csum_ns = htons(firmware_csum); - memcpy(&b0[6], &firmware_csum_ns, 2); - - result = ttusb_dec_send_command(dec, 0x41, sizeof(b0), b0, NULL, NULL); - - if (result) { - release_firmware(fw_entry); - return result; - } - - trans_count = 0; - j = 0; - - b = kmalloc(ARM_PACKET_SIZE, GFP_KERNEL); - if (b == NULL) { - release_firmware(fw_entry); - return -ENOMEM; - } - - for (i = 0; i < firmware_size; i += COMMAND_PACKET_SIZE) { - size = firmware_size - i; - if (size > COMMAND_PACKET_SIZE) - size = COMMAND_PACKET_SIZE; - - b[j + 0] = 0xaa; - b[j + 1] = trans_count++; - b[j + 2] = 0xf0; - b[j + 3] = size; - memcpy(&b[j + 4], &firmware[i], size); - - j += COMMAND_PACKET_SIZE + 4; - - if (j >= ARM_PACKET_SIZE) { - result = usb_bulk_msg(dec->udev, dec->command_pipe, b, - ARM_PACKET_SIZE, &actual_len, - 100); - j = 0; - } else if (size < COMMAND_PACKET_SIZE) { - result = usb_bulk_msg(dec->udev, dec->command_pipe, b, - j - COMMAND_PACKET_SIZE + size, - &actual_len, 100); - } - } - - result = ttusb_dec_send_command(dec, 0x43, sizeof(b1), b1, NULL, NULL); - - release_firmware(fw_entry); - kfree(b); - - return result; -} - -static int ttusb_dec_init_stb(struct ttusb_dec *dec) -{ - int result; - unsigned int mode = 0, model = 0, version = 0; - - dprintk("%s\n", __func__); - - result = ttusb_dec_get_stb_state(dec, &mode, &model, &version); - - if (!result) { - if (!mode) { - if (version == 0xABCDEFAB) - printk(KERN_INFO "ttusb_dec: no version " - "info in Firmware\n"); - else - printk(KERN_INFO "ttusb_dec: Firmware " - "%x.%02x%c%c\n", - version >> 24, (version >> 16) & 0xff, - (version >> 8) & 0xff, version & 0xff); - - result = ttusb_dec_boot_dsp(dec); - if (result) - return result; - else - return 1; - } else { - /* We can't trust the USB IDs that some firmwares - give the box */ - switch (model) { - case 0x00070001: - case 0x00070008: - case 0x0007000c: - ttusb_dec_set_model(dec, TTUSB_DEC3000S); - break; - case 0x00070009: - case 0x00070013: - ttusb_dec_set_model(dec, TTUSB_DEC2000T); - break; - case 0x00070011: - ttusb_dec_set_model(dec, TTUSB_DEC2540T); - break; - default: - printk(KERN_ERR "%s: unknown model returned " - "by firmware (%08x) - please report\n", - __func__, model); - return -1; - break; - } - - if (version >= 0x01770000) - dec->can_playback = 1; - - return 0; - } - } - else - return result; -} - -static int ttusb_dec_init_dvb(struct ttusb_dec *dec) -{ - int result; - - dprintk("%s\n", __func__); - - if ((result = dvb_register_adapter(&dec->adapter, - dec->model_name, THIS_MODULE, - &dec->udev->dev, - adapter_nr)) < 0) { - printk("%s: dvb_register_adapter failed: error %d\n", - __func__, result); - - return result; - } - - dec->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; - - dec->demux.priv = (void *)dec; - dec->demux.filternum = 31; - dec->demux.feednum = 31; - dec->demux.start_feed = ttusb_dec_start_feed; - dec->demux.stop_feed = ttusb_dec_stop_feed; - dec->demux.write_to_decoder = NULL; - - if ((result = dvb_dmx_init(&dec->demux)) < 0) { - printk("%s: dvb_dmx_init failed: error %d\n", __func__, - result); - - dvb_unregister_adapter(&dec->adapter); - - return result; - } - - dec->dmxdev.filternum = 32; - dec->dmxdev.demux = &dec->demux.dmx; - dec->dmxdev.capabilities = 0; - - if ((result = dvb_dmxdev_init(&dec->dmxdev, &dec->adapter)) < 0) { - printk("%s: dvb_dmxdev_init failed: error %d\n", - __func__, result); - - dvb_dmx_release(&dec->demux); - dvb_unregister_adapter(&dec->adapter); - - return result; - } - - dec->frontend.source = DMX_FRONTEND_0; - - if ((result = dec->demux.dmx.add_frontend(&dec->demux.dmx, - &dec->frontend)) < 0) { - printk("%s: dvb_dmx_init failed: error %d\n", __func__, - result); - - dvb_dmxdev_release(&dec->dmxdev); - dvb_dmx_release(&dec->demux); - dvb_unregister_adapter(&dec->adapter); - - return result; - } - - if ((result = dec->demux.dmx.connect_frontend(&dec->demux.dmx, - &dec->frontend)) < 0) { - printk("%s: dvb_dmx_init failed: error %d\n", __func__, - result); - - dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend); - dvb_dmxdev_release(&dec->dmxdev); - dvb_dmx_release(&dec->demux); - dvb_unregister_adapter(&dec->adapter); - - return result; - } - - dvb_net_init(&dec->adapter, &dec->dvb_net, &dec->demux.dmx); - - return 0; -} - -static void ttusb_dec_exit_dvb(struct ttusb_dec *dec) -{ - dprintk("%s\n", __func__); - - dvb_net_release(&dec->dvb_net); - dec->demux.dmx.close(&dec->demux.dmx); - dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend); - dvb_dmxdev_release(&dec->dmxdev); - dvb_dmx_release(&dec->demux); - if (dec->fe) { - dvb_unregister_frontend(dec->fe); - if (dec->fe->ops.release) - dec->fe->ops.release(dec->fe); - } - dvb_unregister_adapter(&dec->adapter); -} - -static void ttusb_dec_exit_rc(struct ttusb_dec *dec) -{ - - dprintk("%s\n", __func__); - /* we have to check whether the irq URB is already submitted. - * As the irq is submitted after the interface is changed, - * this is the best method i figured out. - * Any others?*/ - if (dec->interface == TTUSB_DEC_INTERFACE_IN) - usb_kill_urb(dec->irq_urb); - - usb_free_urb(dec->irq_urb); - - usb_free_coherent(dec->udev,IRQ_PACKET_SIZE, - dec->irq_buffer, dec->irq_dma_handle); - - if (dec->rc_input_dev) { - input_unregister_device(dec->rc_input_dev); - dec->rc_input_dev = NULL; - } -} - - -static void ttusb_dec_exit_usb(struct ttusb_dec *dec) -{ - int i; - - dprintk("%s\n", __func__); - - dec->iso_stream_count = 0; - - for (i = 0; i < ISO_BUF_COUNT; i++) - usb_kill_urb(dec->iso_urb[i]); - - ttusb_dec_free_iso_urbs(dec); -} - -static void ttusb_dec_exit_tasklet(struct ttusb_dec *dec) -{ - struct list_head *item; - struct urb_frame *frame; - - tasklet_kill(&dec->urb_tasklet); - - while ((item = dec->urb_frame_list.next) != &dec->urb_frame_list) { - frame = list_entry(item, struct urb_frame, urb_frame_list); - list_del(&frame->urb_frame_list); - kfree(frame); - } -} - -static void ttusb_dec_init_filters(struct ttusb_dec *dec) -{ - INIT_LIST_HEAD(&dec->filter_info_list); - spin_lock_init(&dec->filter_info_list_lock); -} - -static void ttusb_dec_exit_filters(struct ttusb_dec *dec) -{ - struct list_head *item; - struct filter_info *finfo; - - while ((item = dec->filter_info_list.next) != &dec->filter_info_list) { - finfo = list_entry(item, struct filter_info, filter_info_list); - list_del(&finfo->filter_info_list); - kfree(finfo); - } -} - -static int fe_send_command(struct dvb_frontend* fe, const u8 command, - int param_length, const u8 params[], - int *result_length, u8 cmd_result[]) -{ - struct ttusb_dec* dec = fe->dvb->priv; - return ttusb_dec_send_command(dec, command, param_length, params, result_length, cmd_result); -} - -static struct ttusbdecfe_config fe_config = { - .send_command = fe_send_command -}; - -static int ttusb_dec_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev; - struct ttusb_dec *dec; - - dprintk("%s\n", __func__); - - udev = interface_to_usbdev(intf); - - if (!(dec = kzalloc(sizeof(struct ttusb_dec), GFP_KERNEL))) { - printk("%s: couldn't allocate memory.\n", __func__); - return -ENOMEM; - } - - usb_set_intfdata(intf, (void *)dec); - - switch (id->idProduct) { - case 0x1006: - ttusb_dec_set_model(dec, TTUSB_DEC3000S); - break; - - case 0x1008: - ttusb_dec_set_model(dec, TTUSB_DEC2000T); - break; - - case 0x1009: - ttusb_dec_set_model(dec, TTUSB_DEC2540T); - break; - } - - dec->udev = udev; - - if (ttusb_dec_init_usb(dec)) - return 0; - if (ttusb_dec_init_stb(dec)) { - ttusb_dec_exit_usb(dec); - return 0; - } - ttusb_dec_init_dvb(dec); - - dec->adapter.priv = dec; - switch (id->idProduct) { - case 0x1006: - dec->fe = ttusbdecfe_dvbs_attach(&fe_config); - break; - - case 0x1008: - case 0x1009: - dec->fe = ttusbdecfe_dvbt_attach(&fe_config); - break; - } - - if (dec->fe == NULL) { - printk("dvb-ttusb-dec: A frontend driver was not found for device [%04x:%04x]\n", - le16_to_cpu(dec->udev->descriptor.idVendor), - le16_to_cpu(dec->udev->descriptor.idProduct)); - } else { - if (dvb_register_frontend(&dec->adapter, dec->fe)) { - printk("budget-ci: Frontend registration failed!\n"); - if (dec->fe->ops.release) - dec->fe->ops.release(dec->fe); - dec->fe = NULL; - } - } - - ttusb_dec_init_v_pes(dec); - ttusb_dec_init_filters(dec); - ttusb_dec_init_tasklet(dec); - - dec->active = 1; - - ttusb_dec_set_interface(dec, TTUSB_DEC_INTERFACE_IN); - - if (enable_rc) - ttusb_init_rc(dec); - - return 0; -} - -static void ttusb_dec_disconnect(struct usb_interface *intf) -{ - struct ttusb_dec *dec = usb_get_intfdata(intf); - - usb_set_intfdata(intf, NULL); - - dprintk("%s\n", __func__); - - if (dec->active) { - ttusb_dec_exit_tasklet(dec); - ttusb_dec_exit_filters(dec); - if(enable_rc) - ttusb_dec_exit_rc(dec); - ttusb_dec_exit_usb(dec); - ttusb_dec_exit_dvb(dec); - } - - kfree(dec); -} - -static void ttusb_dec_set_model(struct ttusb_dec *dec, - enum ttusb_dec_model model) -{ - dec->model = model; - - switch (model) { - case TTUSB_DEC2000T: - dec->model_name = "DEC2000-t"; - dec->firmware_name = "dvb-ttusb-dec-2000t.fw"; - break; - - case TTUSB_DEC2540T: - dec->model_name = "DEC2540-t"; - dec->firmware_name = "dvb-ttusb-dec-2540t.fw"; - break; - - case TTUSB_DEC3000S: - dec->model_name = "DEC3000-s"; - dec->firmware_name = "dvb-ttusb-dec-3000s.fw"; - break; - } -} - -static struct usb_device_id ttusb_dec_table[] = { - {USB_DEVICE(0x0b48, 0x1006)}, /* DEC3000-s */ - /*{USB_DEVICE(0x0b48, 0x1007)}, Unconfirmed */ - {USB_DEVICE(0x0b48, 0x1008)}, /* DEC2000-t */ - {USB_DEVICE(0x0b48, 0x1009)}, /* DEC2540-t */ - {} -}; - -static struct usb_driver ttusb_dec_driver = { - .name = "ttusb-dec", - .probe = ttusb_dec_probe, - .disconnect = ttusb_dec_disconnect, - .id_table = ttusb_dec_table, -}; - -module_usb_driver(ttusb_dec_driver); - -MODULE_AUTHOR("Alex Woods <linux-dvb@giblets.org>"); -MODULE_DESCRIPTION(DRIVER_NAME); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(usb, ttusb_dec_table); diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c deleted file mode 100644 index 5c45c9d0712d..000000000000 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * TTUSB DEC Frontend Driver - * - * Copyright (C) 2003-2004 Alex Woods <linux-dvb@giblets.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include "dvb_frontend.h" -#include "ttusbdecfe.h" - - -#define LOF_HI 10600000 -#define LOF_LO 9750000 - -struct ttusbdecfe_state { - - /* configuration settings */ - const struct ttusbdecfe_config* config; - - struct dvb_frontend frontend; - - u8 hi_band; - u8 voltage; -}; - - -static int ttusbdecfe_dvbs_read_status(struct dvb_frontend *fe, - fe_status_t *status) -{ - *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | - FE_HAS_SYNC | FE_HAS_CARRIER | FE_HAS_LOCK; - return 0; -} - - -static int ttusbdecfe_dvbt_read_status(struct dvb_frontend *fe, - fe_status_t *status) -{ - struct ttusbdecfe_state* state = fe->demodulator_priv; - u8 b[] = { 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00 }; - u8 result[4]; - int len, ret; - - *status=0; - - ret=state->config->send_command(fe, 0x73, sizeof(b), b, &len, result); - if(ret) - return ret; - - if(len != 4) { - printk(KERN_ERR "%s: unexpected reply\n", __func__); - return -EIO; - } - - switch(result[3]) { - case 1: /* not tuned yet */ - case 2: /* no signal/no lock*/ - break; - case 3: /* signal found and locked*/ - *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | - FE_HAS_SYNC | FE_HAS_CARRIER | FE_HAS_LOCK; - break; - case 4: - *status = FE_TIMEDOUT; - break; - default: - pr_info("%s: returned unknown value: %d\n", - __func__, result[3]); - return -EIO; - } - - return 0; -} - -static int ttusbdecfe_dvbt_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv; - u8 b[] = { 0x00, 0x00, 0x00, 0x03, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x01, - 0x00, 0x00, 0x00, 0xff, - 0x00, 0x00, 0x00, 0xff }; - - __be32 freq = htonl(p->frequency / 1000); - memcpy(&b[4], &freq, sizeof (u32)); - state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL); - - return 0; -} - -static int ttusbdecfe_dvbt_get_tune_settings(struct dvb_frontend* fe, - struct dvb_frontend_tune_settings* fesettings) -{ - fesettings->min_delay_ms = 1500; - /* Drift compensation makes no sense for DVB-T */ - fesettings->step_size = 0; - fesettings->max_drift = 0; - return 0; -} - -static int ttusbdecfe_dvbs_set_frontend(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv; - - u8 b[] = { 0x00, 0x00, 0x00, 0x01, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x01, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00 }; - __be32 freq; - __be32 sym_rate; - __be32 band; - __be32 lnb_voltage; - - freq = htonl(p->frequency + - (state->hi_band ? LOF_HI : LOF_LO)); - memcpy(&b[4], &freq, sizeof(u32)); - sym_rate = htonl(p->symbol_rate); - memcpy(&b[12], &sym_rate, sizeof(u32)); - band = htonl(state->hi_band ? LOF_HI : LOF_LO); - memcpy(&b[24], &band, sizeof(u32)); - lnb_voltage = htonl(state->voltage); - memcpy(&b[28], &lnb_voltage, sizeof(u32)); - - state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL); - - return 0; -} - -static int ttusbdecfe_dvbs_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd) -{ - struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv; - u8 b[] = { 0x00, 0xff, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00 }; - - memcpy(&b[4], cmd->msg, cmd->msg_len); - - state->config->send_command(fe, 0x72, - sizeof(b) - (6 - cmd->msg_len), b, - NULL, NULL); - - return 0; -} - - -static int ttusbdecfe_dvbs_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) -{ - struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv; - - state->hi_band = (SEC_TONE_ON == tone); - - return 0; -} - - -static int ttusbdecfe_dvbs_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv; - - switch (voltage) { - case SEC_VOLTAGE_13: - state->voltage = 13; - break; - case SEC_VOLTAGE_18: - state->voltage = 18; - break; - default: - return -EINVAL; - } - - return 0; -} - -static void ttusbdecfe_release(struct dvb_frontend* fe) -{ - struct ttusbdecfe_state* state = (struct ttusbdecfe_state*) fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops ttusbdecfe_dvbt_ops; - -struct dvb_frontend* ttusbdecfe_dvbt_attach(const struct ttusbdecfe_config* config) -{ - struct ttusbdecfe_state* state = NULL; - - /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL); - if (state == NULL) - return NULL; - - /* setup the state */ - state->config = config; - - /* create dvb_frontend */ - memcpy(&state->frontend.ops, &ttusbdecfe_dvbt_ops, sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = state; - return &state->frontend; -} - -static struct dvb_frontend_ops ttusbdecfe_dvbs_ops; - -struct dvb_frontend* ttusbdecfe_dvbs_attach(const struct ttusbdecfe_config* config) -{ - struct ttusbdecfe_state* state = NULL; - - /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL); - if (state == NULL) - return NULL; - - /* setup the state */ - state->config = config; - state->voltage = 0; - state->hi_band = 0; - - /* create dvb_frontend */ - memcpy(&state->frontend.ops, &ttusbdecfe_dvbs_ops, sizeof(struct dvb_frontend_ops)); - state->frontend.demodulator_priv = state; - return &state->frontend; -} - -static struct dvb_frontend_ops ttusbdecfe_dvbt_ops = { - .delsys = { SYS_DVBT }, - .info = { - .name = "TechnoTrend/Hauppauge DEC2000-t Frontend", - .frequency_min = 51000000, - .frequency_max = 858000000, - .frequency_stepsize = 62500, - .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | - FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | - FE_CAN_HIERARCHY_AUTO, - }, - - .release = ttusbdecfe_release, - - .set_frontend = ttusbdecfe_dvbt_set_frontend, - - .get_tune_settings = ttusbdecfe_dvbt_get_tune_settings, - - .read_status = ttusbdecfe_dvbt_read_status, -}; - -static struct dvb_frontend_ops ttusbdecfe_dvbs_ops = { - .delsys = { SYS_DVBS }, - .info = { - .name = "TechnoTrend/Hauppauge DEC3000-s Frontend", - .frequency_min = 950000, - .frequency_max = 2150000, - .frequency_stepsize = 125, - .symbol_rate_min = 1000000, /* guessed */ - .symbol_rate_max = 45000000, /* guessed */ - .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_QPSK - }, - - .release = ttusbdecfe_release, - - .set_frontend = ttusbdecfe_dvbs_set_frontend, - - .read_status = ttusbdecfe_dvbs_read_status, - - .diseqc_send_master_cmd = ttusbdecfe_dvbs_diseqc_send_master_cmd, - .set_voltage = ttusbdecfe_dvbs_set_voltage, - .set_tone = ttusbdecfe_dvbs_set_tone, -}; - -MODULE_DESCRIPTION("TTUSB DEC DVB-T/S Demodulator driver"); -MODULE_AUTHOR("Alex Woods/Andrew de Quincey"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(ttusbdecfe_dvbt_attach); -EXPORT_SYMBOL(ttusbdecfe_dvbs_attach); diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.h b/drivers/media/dvb/ttusb-dec/ttusbdecfe.h deleted file mode 100644 index 15ccc3d1a20e..000000000000 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * TTUSB DEC Driver - * - * Copyright (C) 2003-2004 Alex Woods <linux-dvb@giblets.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef TTUSBDECFE_H -#define TTUSBDECFE_H - -#include <linux/dvb/frontend.h> - -struct ttusbdecfe_config -{ - int (*send_command)(struct dvb_frontend* fe, const u8 command, - int param_length, const u8 params[], - int *result_length, u8 cmd_result[]); -}; - -extern struct dvb_frontend* ttusbdecfe_dvbs_attach(const struct ttusbdecfe_config* config); - -extern struct dvb_frontend* ttusbdecfe_dvbt_attach(const struct ttusbdecfe_config* config); - -#endif // TTUSBDECFE_H |