[media] Rename media/dvb as media/pci

The remaining dvb drivers are pci, so rename them to match the
bus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 609 insertions, 0 deletions

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
new file mode 100644
index 000000000000..b34fa95185e4
--- /dev/null
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -0,0 +1,609 @@
+/*
+ * bt878.c: part of the driver for the Pinnacle PCTV Sat DVB PCI card
+ *
+ * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
+ *
+ * large parts based on the bttv driver
+ * Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@metzlerbros.de)
+ *                        & Marcus Metzler (mocm@metzlerbros.de)
+ * (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <linux/ioport.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "bt878.h"
+#include "dst_priv.h"
+
+
+/**************************************/
+/* Miscellaneous utility  definitions */
+/**************************************/
+
+static unsigned int bt878_verbose = 1;
+static unsigned int bt878_debug;
+
+module_param_named(verbose, bt878_verbose, int, 0444);
+MODULE_PARM_DESC(verbose,
+		 "verbose startup messages, default is 1 (yes)");
+module_param_named(debug, bt878_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off).");
+
+int bt878_num;
+struct bt878 bt878[BT878_MAX];
+
+EXPORT_SYMBOL(bt878_num);
+EXPORT_SYMBOL(bt878);
+
+#define btwrite(dat,adr)    bmtwrite((dat), (bt->bt878_mem+(adr)))
+#define btread(adr)         bmtread(bt->bt878_mem+(adr))
+
+#define btand(dat,adr)      btwrite((dat) & btread(adr), adr)
+#define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
+#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
+
+#if defined(dprintk)
+#undef dprintk
+#endif
+#define dprintk(fmt, arg...) \
+	do { \
+		if (bt878_debug) \
+			printk(KERN_DEBUG fmt, ##arg); \
+	} while (0)
+
+static void bt878_mem_free(struct bt878 *bt)
+{
+	if (bt->buf_cpu) {
+		pci_free_consistent(bt->dev, bt->buf_size, bt->buf_cpu,
+				    bt->buf_dma);
+		bt->buf_cpu = NULL;
+	}
+
+	if (bt->risc_cpu) {
+		pci_free_consistent(bt->dev, bt->risc_size, bt->risc_cpu,
+				    bt->risc_dma);
+		bt->risc_cpu = NULL;
+	}
+}
+
+static int bt878_mem_alloc(struct bt878 *bt)
+{
+	if (!bt->buf_cpu) {
+		bt->buf_size = 128 * 1024;
+
+		bt->buf_cpu =
+		    pci_alloc_consistent(bt->dev, bt->buf_size,
+					 &bt->buf_dma);
+
+		if (!bt->buf_cpu)
+			return -ENOMEM;
+
+		memset(bt->buf_cpu, 0, bt->buf_size);
+	}
+
+	if (!bt->risc_cpu) {
+		bt->risc_size = PAGE_SIZE;
+		bt->risc_cpu =
+		    pci_alloc_consistent(bt->dev, bt->risc_size,
+					 &bt->risc_dma);
+
+		if (!bt->risc_cpu) {
+			bt878_mem_free(bt);
+			return -ENOMEM;
+		}
+
+		memset(bt->risc_cpu, 0, bt->risc_size);
+	}
+
+	return 0;
+}
+
+/* RISC instructions */
+#define RISC_WRITE		(0x01 << 28)
+#define RISC_JUMP		(0x07 << 28)
+#define RISC_SYNC		(0x08 << 28)
+
+/* RISC bits */
+#define RISC_WR_SOL		(1 << 27)
+#define RISC_WR_EOL		(1 << 26)
+#define RISC_IRQ		(1 << 24)
+#define RISC_STATUS(status)	((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16))
+#define RISC_SYNC_RESYNC	(1 << 15)
+#define RISC_SYNC_FM1		0x06
+#define RISC_SYNC_VRO		0x0C
+
+#define RISC_FLUSH()		bt->risc_pos = 0
+#define RISC_INSTR(instr)	bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
+
+static int bt878_make_risc(struct bt878 *bt)
+{
+	bt->block_bytes = bt->buf_size >> 4;
+	bt->block_count = 1 << 4;
+	bt->line_bytes = bt->block_bytes;
+	bt->line_count = bt->block_count;
+
+	while (bt->line_bytes > 4095) {
+		bt->line_bytes >>= 1;
+		bt->line_count <<= 1;
+	}
+
+	if (bt->line_count > 255) {
+		printk(KERN_ERR "bt878: buffer size error!\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin)
+{
+	u32 buf_pos = 0;
+	u32 line;
+
+	RISC_FLUSH();
+	RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin);
+	RISC_INSTR(0);
+
+	dprintk("bt878: risc len lines %u, bytes per line %u\n",
+			bt->line_count, bt->line_bytes);
+	for (line = 0; line < bt->line_count; line++) {
+		// At the beginning of every block we issue an IRQ with previous (finished) block number set
+		if (!(buf_pos % bt->block_bytes))
+			RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
+				   RISC_IRQ |
+				   RISC_STATUS(((buf_pos /
+						 bt->block_bytes) +
+						(bt->block_count -
+						 1)) %
+					       bt->block_count) | bt->
+				   line_bytes);
+		else
+			RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
+				   bt->line_bytes);
+		RISC_INSTR(bt->buf_dma + buf_pos);
+		buf_pos += bt->line_bytes;
+	}
+
+	RISC_INSTR(RISC_SYNC | op_sync_orin | RISC_SYNC_VRO);
+	RISC_INSTR(0);
+
+	RISC_INSTR(RISC_JUMP);
+	RISC_INSTR(bt->risc_dma);
+
+	btwrite((bt->line_count << 16) | bt->line_bytes, BT878_APACK_LEN);
+}
+
+/*****************************/
+/* Start/Stop grabbing funcs */
+/*****************************/
+
+void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
+		u32 irq_err_ignore)
+{
+	u32 int_mask;
+
+	dprintk("bt878 debug: bt878_start (ctl=%8.8x)\n", controlreg);
+	/* complete the writing of the risc dma program now we have
+	 * the card specifics
+	 */
+	bt878_risc_program(bt, op_sync_orin);
+	controlreg &= ~0x1f;
+	controlreg |= 0x1b;
+
+	btwrite(bt->risc_dma, BT878_ARISC_START);
+
+	/* original int mask had :
+	 *    6    2    8    4    0
+	 * 1111 1111 1000 0000 0000
+	 * SCERR|OCERR|PABORT|RIPERR|FDSR|FTRGT|FBUS|RISCI
+	 * Hacked for DST to:
+	 * SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI
+	 */
+	int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
+		BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
+		BT878_AFBUS | BT878_ARISCI;
+
+
+	/* ignore pesky bits */
+	int_mask &= ~irq_err_ignore;
+
+	btwrite(int_mask, BT878_AINT_MASK);
+	btwrite(controlreg, BT878_AGPIO_DMA_CTL);
+}
+
+void bt878_stop(struct bt878 *bt)
+{
+	u32 stat;
+	int i = 0;
+
+	dprintk("bt878 debug: bt878_stop\n");
+
+	btwrite(0, BT878_AINT_MASK);
+	btand(~0x13, BT878_AGPIO_DMA_CTL);
+
+	do {
+		stat = btread(BT878_AINT_STAT);
+		if (!(stat & BT878_ARISC_EN))
+			break;
+		i++;
+	} while (i < 500);
+
+	dprintk("bt878(%d) debug: bt878_stop, i=%d, stat=0x%8.8x\n",
+		bt->nr, i, stat);
+}
+
+EXPORT_SYMBOL(bt878_start);
+EXPORT_SYMBOL(bt878_stop);
+
+/*****************************/
+/* Interrupt service routine */
+/*****************************/
+
+static irqreturn_t bt878_irq(int irq, void *dev_id)
+{
+	u32 stat, astat, mask;
+	int count;
+	struct bt878 *bt;
+
+	bt = (struct bt878 *) dev_id;
+
+	count = 0;
+	while (1) {
+		stat = btread(BT878_AINT_STAT);
+		mask = btread(BT878_AINT_MASK);
+		if (!(astat = (stat & mask)))
+			return IRQ_NONE;	/* this interrupt is not for me */
+/*		dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */
+		btwrite(astat, BT878_AINT_STAT);	/* try to clear interrupt condition */
+
+
+		if (astat & (BT878_ASCERR | BT878_AOCERR)) {
+			if (bt878_verbose) {
+				printk(KERN_INFO
+				       "bt878(%d): irq%s%s risc_pc=%08x\n",
+				       bt->nr,
+				       (astat & BT878_ASCERR) ? " SCERR" :
+				       "",
+				       (astat & BT878_AOCERR) ? " OCERR" :
+				       "", btread(BT878_ARISC_PC));
+			}
+		}
+		if (astat & (BT878_APABORT | BT878_ARIPERR | BT878_APPERR)) {
+			if (bt878_verbose) {
+				printk(KERN_INFO
+				     "bt878(%d): irq%s%s%s risc_pc=%08x\n",
+				     bt->nr,
+				     (astat & BT878_APABORT) ? " PABORT" :
+				     "",
+				     (astat & BT878_ARIPERR) ? " RIPERR" :
+				     "",
+				     (astat & BT878_APPERR) ? " PPERR" :
+				     "", btread(BT878_ARISC_PC));
+			}
+		}
+		if (astat & (BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS)) {
+			if (bt878_verbose) {
+				printk(KERN_INFO
+				     "bt878(%d): irq%s%s%s risc_pc=%08x\n",
+				     bt->nr,
+				     (astat & BT878_AFDSR) ? " FDSR" : "",
+				     (astat & BT878_AFTRGT) ? " FTRGT" :
+				     "",
+				     (astat & BT878_AFBUS) ? " FBUS" : "",
+				     btread(BT878_ARISC_PC));
+			}
+		}
+		if (astat & BT878_ARISCI) {
+			bt->finished_block = (stat & BT878_ARISCS) >> 28;
+			tasklet_schedule(&bt->tasklet);
+			break;
+		}
+		count++;
+		if (count > 20) {
+			btwrite(0, BT878_AINT_MASK);
+			printk(KERN_ERR
+			       "bt878(%d): IRQ lockup, cleared int mask\n",
+			       bt->nr);
+			break;
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+int
+bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp)
+{
+	int retval;
+
+	retval = 0;
+	if (mutex_lock_interruptible(&bt->gpio_lock))
+		return -ERESTARTSYS;
+	/* special gpio signal */
+	switch (cmd) {
+	    case DST_IG_ENABLE:
+		// dprintk("dvb_bt8xx: dst enable mask 0x%02x enb 0x%02x \n", mp->dstg.enb.mask, mp->dstg.enb.enable);
+		retval = bttv_gpio_enable(bt->bttv_nr,
+				mp->enb.mask,
+				mp->enb.enable);
+		break;
+	    case DST_IG_WRITE:
+		// dprintk("dvb_bt8xx: dst write gpio mask 0x%02x out 0x%02x\n", mp->dstg.outp.mask, mp->dstg.outp.highvals);
+		retval = bttv_write_gpio(bt->bttv_nr,
+				mp->outp.mask,
+				mp->outp.highvals);
+
+		break;
+	    case DST_IG_READ:
+		/* read */
+		retval =  bttv_read_gpio(bt->bttv_nr, &mp->rd.value);
+		// dprintk("dvb_bt8xx: dst read gpio 0x%02x\n", (unsigned)mp->dstg.rd.value);
+		break;
+	    case DST_IG_TS:
+		/* Set packet size */
+		bt->TS_Size = mp->psize;
+		break;
+
+	    default:
+		retval = -EINVAL;
+		break;
+	}
+	mutex_unlock(&bt->gpio_lock);
+	return retval;
+}
+
+EXPORT_SYMBOL(bt878_device_control);
+
+#define BROOKTREE_878_DEVICE(vend, dev, name) \
+	{ \
+		.vendor = PCI_VENDOR_ID_BROOKTREE, \
+		.device = PCI_DEVICE_ID_BROOKTREE_878, \
+		.subvendor = (vend), .subdevice = (dev), \
+		.driver_data = (unsigned long) name \
+	}
+
+static struct pci_device_id bt878_pci_tbl[] __devinitdata = {
+	BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"),
+	BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"),
+	BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"),
+	BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"),
+	BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"),
+	BROOKTREE_878_DEVICE(0x270f, 0xfc00,
+				"ChainTech digitop DST-1000 DVB-S"),
+	BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"),
+	BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"),
+	BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"),
+	BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"),
+	BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"),
+	BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"),
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
+
+static const char * __devinit card_name(const struct pci_device_id *id)
+{
+	return id->driver_data ? (const char *)id->driver_data : "Unknown";
+}
+
+/***********************/
+/* PCI device handling */
+/***********************/
+
+static int __devinit bt878_probe(struct pci_dev *dev,
+				 const struct pci_device_id *pci_id)
+{
+	int result = 0;
+	unsigned char lat;
+	struct bt878 *bt;
+#if defined(__powerpc__)
+	unsigned int cmd;
+#endif
+	unsigned int cardid;
+
+	printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
+	       bt878_num);
+	if (bt878_num >= BT878_MAX) {
+		printk(KERN_ERR "bt878: Too many devices inserted\n");
+		result = -ENOMEM;
+		goto fail0;
+	}
+	if (pci_enable_device(dev))
+		return -EIO;
+
+	cardid = dev->subsystem_device << 16;
+	cardid |= dev->subsystem_vendor;
+
+	printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+				__func__, cardid, card_name(pci_id));
+
+	bt = &bt878[bt878_num];
+	bt->dev = dev;
+	bt->nr = bt878_num;
+	bt->shutdown = 0;
+
+	bt->id = dev->device;
+	bt->irq = dev->irq;
+	bt->bt878_adr = pci_resource_start(dev, 0);
+	if (!request_mem_region(pci_resource_start(dev, 0),
+				pci_resource_len(dev, 0), "bt878")) {
+		result = -EBUSY;
+		goto fail0;
+	}
+
+	bt->revision = dev->revision;
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
+	printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
+	       bt878_num, bt->id, bt->revision, dev->bus->number,
+	       PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+	printk("irq: %d, latency: %d, memory: 0x%lx\n",
+	       bt->irq, lat, bt->bt878_adr);
+
+
+#if defined(__powerpc__)
+	/* on OpenFirmware machines (PowerMac at least), PCI memory cycle */
+	/* response on cards with no firmware is not enabled by OF */
+	pci_read_config_dword(dev, PCI_COMMAND, &cmd);
+	cmd = (cmd | PCI_COMMAND_MEMORY);
+	pci_write_config_dword(dev, PCI_COMMAND, cmd);
+#endif
+
+#ifdef __sparc__
+	bt->bt878_mem = (unsigned char *) bt->bt878_adr;
+#else
+	bt->bt878_mem = ioremap(bt->bt878_adr, 0x1000);
+#endif
+
+	/* clear interrupt mask */
+	btwrite(0, BT848_INT_MASK);
+
+	result = request_irq(bt->irq, bt878_irq,
+			     IRQF_SHARED | IRQF_DISABLED, "bt878",
+			     (void *) bt);
+	if (result == -EINVAL) {
+		printk(KERN_ERR "bt878(%d): Bad irq number or handler\n",
+		       bt878_num);
+		goto fail1;
+	}
+	if (result == -EBUSY) {
+		printk(KERN_ERR
+		       "bt878(%d): IRQ %d busy, change your PnP config in BIOS\n",
+		       bt878_num, bt->irq);
+		goto fail1;
+	}
+	if (result < 0)
+		goto fail1;
+
+	pci_set_master(dev);
+	pci_set_drvdata(dev, bt);
+
+	if ((result = bt878_mem_alloc(bt))) {
+		printk(KERN_ERR "bt878: failed to allocate memory!\n");
+		goto fail2;
+	}
+
+	bt878_make_risc(bt);
+	btwrite(0, BT878_AINT_MASK);
+	bt878_num++;
+
+	return 0;
+
+      fail2:
+	free_irq(bt->irq, bt);
+      fail1:
+	release_mem_region(pci_resource_start(bt->dev, 0),
+			   pci_resource_len(bt->dev, 0));
+      fail0:
+	pci_disable_device(dev);
+	return result;
+}
+
+static void __devexit bt878_remove(struct pci_dev *pci_dev)
+{
+	u8 command;
+	struct bt878 *bt = pci_get_drvdata(pci_dev);
+
+	if (bt878_verbose)
+		printk(KERN_INFO "bt878(%d): unloading\n", bt->nr);
+
+	/* turn off all capturing, DMA and IRQs */
+	btand(~0x13, BT878_AGPIO_DMA_CTL);
+
+	/* first disable interrupts before unmapping the memory! */
+	btwrite(0, BT878_AINT_MASK);
+	btwrite(~0U, BT878_AINT_STAT);
+
+	/* disable PCI bus-mastering */
+	pci_read_config_byte(bt->dev, PCI_COMMAND, &command);
+	/* Should this be &=~ ?? */
+	command &= ~PCI_COMMAND_MASTER;
+	pci_write_config_byte(bt->dev, PCI_COMMAND, command);
+
+	free_irq(bt->irq, bt);
+	printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem);
+	if (bt->bt878_mem)
+		iounmap(bt->bt878_mem);
+
+	release_mem_region(pci_resource_start(bt->dev, 0),
+			   pci_resource_len(bt->dev, 0));
+	/* wake up any waiting processes
+	   because shutdown flag is set, no new processes (in this queue)
+	   are expected
+	 */
+	bt->shutdown = 1;
+	bt878_mem_free(bt);
+
+	pci_set_drvdata(pci_dev, NULL);
+	pci_disable_device(pci_dev);
+	return;
+}
+
+static struct pci_driver bt878_pci_driver = {
+      .name	= "bt878",
+      .id_table = bt878_pci_tbl,
+      .probe	= bt878_probe,
+      .remove	= __devexit_p(bt878_remove),
+};
+
+/*******************************/
+/* Module management functions */
+/*******************************/
+
+static int __init bt878_init_module(void)
+{
+	bt878_num = 0;
+
+	printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n",
+	       (BT878_VERSION_CODE >> 16) & 0xff,
+	       (BT878_VERSION_CODE >> 8) & 0xff,
+	       BT878_VERSION_CODE & 0xff);
+
+	return pci_register_driver(&bt878_pci_driver);
+}
+
+static void __exit bt878_cleanup_module(void)
+{
+	pci_unregister_driver(&bt878_pci_driver);
+}
+
+module_init(bt878_init_module);
+module_exit(bt878_cleanup_module);
+
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */