media: replace all <spaces><tab> occurrences

There are a lot of places where sequences of space/tabs are
found. Get rid of all spaces before tabs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

12 files changed, 153 insertions, 153 deletions

diff --git a/drivers/media/pci/cx18/cx18-alsa-pcm.c b/drivers/media/pci/cx18/cx18-alsa-pcm.c
index aadd76466aec..4f31042a442a 100644
--- a/drivers/media/pci/cx18/cx18-alsa-pcm.c
+++ b/drivers/media/pci/cx18/cx18-alsa-pcm.c
@@ -41,7 +41,7 @@ MODULE_PARM_DESC(pcm_debug, "enable debug messages for pcm");
 #define dprintk(fmt, arg...) do {					\
 	    if (pcm_debug)						\
 		printk(KERN_INFO "cx18-alsa-pcm %s: " fmt,		\
-				  __func__, ##arg); 			\
+				  __func__, ##arg);			\
 	} while (0)
 
 static const struct snd_pcm_hardware snd_cx18_hw_capture = {
diff --git a/drivers/media/pci/cx18/cx18-av-audio.c b/drivers/media/pci/cx18/cx18-av-audio.c
index 8b95e9aae576..3abc54cbe4a1 100644
--- a/drivers/media/pci/cx18/cx18-av-audio.c
+++ b/drivers/media/pci/cx18/cx18-av-audio.c
@@ -31,7 +31,7 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
 	 * would ideally be:
 	 *
 	 * NTSC Color subcarrier freq * 8 =
-	 * 	4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+	 *	4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
 	 *
 	 * The accidents of history and rationale that explain from where this
 	 * combination of magic numbers originate can be found in:
diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c
index cf8817e9c8b9..eda343322ee0 100644
--- a/drivers/media/pci/cx18/cx18-av-core.c
+++ b/drivers/media/pci/cx18/cx18-av-core.c
@@ -236,10 +236,10 @@ static void cx18_av_initialize(struct v4l2_subdev *sd)
 	 */
 	cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00);
 
-/* 	if(dwEnable && dw3DCombAvailable) { */
-/*      	CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
+/*	if(dwEnable && dw3DCombAvailable) { */
+/*		CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
 /*    } else { */
-/*      	CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */
+/*		CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */
 /*    } */
 	cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F);
 	default_volume = cx18_av_read(cx, 0x8d4);
@@ -319,13 +319,13 @@ void cx18_av_std_setup(struct cx18 *cx)
 		 * vblank656: half lines after line 625/mid-313 of blanked video
 		 * vblank:    half lines, after line 5/317, of blanked video
 		 * vactive:   half lines of active video +
-		 * 		5 half lines after the end of active video
+		 *		5 half lines after the end of active video
 		 *
 		 * As far as I can tell:
 		 * vblank656 starts counting from the falling edge of the first
-		 * 	vsync pulse (start of line 1 or mid-313)
+		 *	vsync pulse (start of line 1 or mid-313)
 		 * vblank starts counting from the after the 5 vsync pulses and
-		 * 	5 or 4 equalization pulses (start of line 6 or 318)
+		 *	5 or 4 equalization pulses (start of line 6 or 318)
 		 *
 		 * For 625 line systems the driver will extract VBI information
 		 * from lines 6-23 and lines 318-335 (but the slicer can only
@@ -395,9 +395,9 @@ void cx18_av_std_setup(struct cx18 *cx)
 		 *
 		 * As far as I can tell:
 		 * vblank656 starts counting from the falling edge of the first
-		 * 	vsync pulse (start of line 4 or mid-266)
+		 *	vsync pulse (start of line 4 or mid-266)
 		 * vblank starts counting from the after the 6 vsync pulses and
-		 * 	6 or 5 equalization pulses (start of line 10 or 272)
+		 *	6 or 5 equalization pulses (start of line 10 or 272)
 		 *
 		 * For 525 line systems the driver will extract VBI information
 		 * from lines 10-21 and lines 273-284.
@@ -851,7 +851,7 @@ static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
 	struct cx18_av_state *state = to_cx18_av_state(sd);
 	struct cx18 *cx = v4l2_get_subdevdata(sd);
 
-	u8 fmt = 0; 	/* zero is autodetect */
+	u8 fmt = 0;	/* zero is autodetect */
 	u8 pal_m = 0;
 
 	if (state->radio == 0 && state->std == norm)
diff --git a/drivers/media/pci/cx18/cx18-av-core.h b/drivers/media/pci/cx18/cx18-av-core.h
index c976ce6e7a78..1a37f269d2e4 100644
--- a/drivers/media/pci/cx18/cx18-av-core.h
+++ b/drivers/media/pci/cx18/cx18-av-core.h
@@ -349,7 +349,7 @@ static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
 }
 
 /* ----------------------------------------------------------------------- */
-/* cx18_av-core.c 							   */
+/* cx18_av-core.c							   */
 int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
 int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
 int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value);
diff --git a/drivers/media/pci/cx18/cx18-cards.c b/drivers/media/pci/cx18/cx18-cards.c
index 11e898e66ce9..c2cf965d639e 100644
--- a/drivers/media/pci/cx18/cx18-cards.c
+++ b/drivers/media/pci/cx18/cx18-cards.c
@@ -388,7 +388,7 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = {
 		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
 	},
 	.audio_inputs = {
-		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 	    0 },
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
 		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
 		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
 	},
@@ -439,7 +439,7 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = {
 		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
 	},
 	.audio_inputs = {
-		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 	    0 },
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
 		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
 	},
 	.tuners = {
@@ -485,7 +485,7 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = {
 		{ CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
 	},
 	.audio_inputs = {
-		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 	    0 },
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
 		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
 	},
 	.tuners = {
@@ -538,7 +538,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = {
 		{ CX18_CARD_INPUT_COMPONENT1, 1, CX18_AV_COMPONENT1 },
 	},
 	.audio_inputs = {
-		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 	    0 },
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,	    0 },
 		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
 	},
 	.tuners = {
diff --git a/drivers/media/pci/cx18/cx18-cards.h b/drivers/media/pci/cx18/cx18-cards.h
index 5478f62b5cf3..02d0fb703a41 100644
--- a/drivers/media/pci/cx18/cx18-cards.h
+++ b/drivers/media/pci/cx18/cx18-cards.h
@@ -29,20 +29,20 @@
 
 /* video inputs */
 #define	CX18_CARD_INPUT_VID_TUNER	1
-#define	CX18_CARD_INPUT_SVIDEO1 	2
-#define	CX18_CARD_INPUT_SVIDEO2 	3
-#define	CX18_CARD_INPUT_COMPOSITE1 	4
-#define	CX18_CARD_INPUT_COMPOSITE2 	5
-#define	CX18_CARD_INPUT_COMPONENT1 	6
+#define	CX18_CARD_INPUT_SVIDEO1		2
+#define	CX18_CARD_INPUT_SVIDEO2		3
+#define	CX18_CARD_INPUT_COMPOSITE1	4
+#define	CX18_CARD_INPUT_COMPOSITE2	5
+#define	CX18_CARD_INPUT_COMPONENT1	6
 
 /* audio inputs */
 #define	CX18_CARD_INPUT_AUD_TUNER	1
-#define	CX18_CARD_INPUT_LINE_IN1 	2
-#define	CX18_CARD_INPUT_LINE_IN2 	3
+#define	CX18_CARD_INPUT_LINE_IN1	2
+#define	CX18_CARD_INPUT_LINE_IN2	3
 
 #define CX18_CARD_MAX_VIDEO_INPUTS 6
 #define CX18_CARD_MAX_AUDIO_INPUTS 3
-#define CX18_CARD_MAX_TUNERS  	   2
+#define CX18_CARD_MAX_TUNERS	   2
 
 /* V4L2 capability aliases */
 #define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
@@ -51,7 +51,7 @@
 			  V4L2_CAP_SLICED_VBI_CAPTURE)
 
 struct cx18_card_video_input {
-	u8  video_type; 	/* video input type */
+	u8  video_type;		/* video input type */
 	u8  audio_index;	/* index in cx18_card_audio_input array */
 	u32 video_input;	/* hardware video input */
 };
@@ -74,7 +74,7 @@ struct cx18_card_pci_info {
 /* The mask is the set of bits used by the operation */
 
 struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
-	u32 direction; 	/* DIR setting. Leave to 0 if no init is needed */
+	u32 direction;	/* DIR setting. Leave to 0 if no init is needed */
 	u32 initial_value;
 };
 
@@ -86,16 +86,16 @@ struct cx18_gpio_i2c_slave_reset {
 	u32 ir_reset_mask;  /* GPIO to reset the Zilog Z8F0811 IR contoller */
 };
 
-struct cx18_gpio_audio_input { 	/* select tuner/line in input */
-	u32 mask; 		/* leave to 0 if not supported */
+struct cx18_gpio_audio_input {	/* select tuner/line in input */
+	u32 mask;		/* leave to 0 if not supported */
 	u32 tuner;
 	u32 linein;
 	u32 radio;
 };
 
 struct cx18_card_tuner {
-	v4l2_std_id std; 	/* standard for which the tuner is suitable */
-	int 	    tuner; 	/* tuner ID (from tuner.h) */
+	v4l2_std_id std;	/* standard for which the tuner is suitable */
+	int	    tuner;	/* tuner ID (from tuner.h) */
 };
 
 struct cx18_card_tuner_i2c {
@@ -128,8 +128,8 @@ struct cx18_card {
 	struct cx18_card_audio_input radio_input;
 
 	/* GPIO card-specific settings */
-	u8 xceive_pin; 		/* XCeive tuner GPIO reset pin */
-	struct cx18_gpio_init 		 gpio_init;
+	u8 xceive_pin;		/* XCeive tuner GPIO reset pin */
+	struct cx18_gpio_init		 gpio_init;
 	struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
 	struct cx18_gpio_audio_input    gpio_audio_input;
 
diff --git a/drivers/media/pci/cx18/cx18-driver.h b/drivers/media/pci/cx18/cx18-driver.h
index 3492023a8675..0b707faca543 100644
--- a/drivers/media/pci/cx18/cx18-driver.h
+++ b/drivers/media/pci/cx18/cx18-driver.h
@@ -75,8 +75,8 @@
 /* Supported cards */
 #define CX18_CARD_HVR_1600_ESMT	      0	/* Hauppauge HVR 1600 (ESMT memory) */
 #define CX18_CARD_HVR_1600_SAMSUNG    1	/* Hauppauge HVR 1600 (Samsung memory) */
-#define CX18_CARD_COMPRO_H900 	      2	/* Compro VideoMate H900 */
-#define CX18_CARD_YUAN_MPC718 	      3	/* Yuan MPC718 */
+#define CX18_CARD_COMPRO_H900	      2	/* Compro VideoMate H900 */
+#define CX18_CARD_YUAN_MPC718	      3	/* Yuan MPC718 */
 #define CX18_CARD_CNXT_RAPTOR_PAL     4	/* Conexant Raptor PAL */
 #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
 #define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
@@ -99,9 +99,9 @@
 #define PCI_DEVICE_ID_CX23418 0x5b7a
 
 /* subsystem vendor ID */
-#define CX18_PCI_ID_HAUPPAUGE 		0x0070
-#define CX18_PCI_ID_COMPRO 		0x185b
-#define CX18_PCI_ID_YUAN 		0x12ab
+#define CX18_PCI_ID_HAUPPAUGE		0x0070
+#define CX18_PCI_ID_COMPRO		0x185b
+#define CX18_PCI_ID_YUAN		0x12ab
 #define CX18_PCI_ID_CONEXANT		0x14f1
 #define CX18_PCI_ID_TOSHIBA		0x1179
 #define CX18_PCI_ID_LEADTEK		0x107D
@@ -260,7 +260,7 @@ struct cx18_options {
 #define CX18_F_M_NEED_SWAP  0	/* mdl buffer data must be endianness swapped */
 
 /* per-stream, s_flags */
-#define CX18_F_S_CLAIMED 	3	/* this stream is claimed */
+#define CX18_F_S_CLAIMED	3	/* this stream is claimed */
 #define CX18_F_S_STREAMING      4	/* the fw is decoding/encoding this stream */
 #define CX18_F_S_INTERNAL_USE	5	/* this stream is used internally (sliced VBI processing) */
 #define CX18_F_S_STREAMOFF	7	/* signal end of stream EOS */
@@ -268,12 +268,12 @@ struct cx18_options {
 #define CX18_F_S_STOPPING	9	/* telling the fw to stop capturing */
 
 /* per-cx18, i_flags */
-#define CX18_F_I_LOADED_FW		0 	/* Loaded firmware 1st time */
-#define CX18_F_I_EOS			4 	/* End of encoder stream */
-#define CX18_F_I_RADIO_USER		5 	/* radio tuner is selected */
-#define CX18_F_I_ENC_PAUSED		13 	/* the encoder is paused */
-#define CX18_F_I_INITED			21 	/* set after first open */
-#define CX18_F_I_FAILED			22 	/* set if first open failed */
+#define CX18_F_I_LOADED_FW		0	/* Loaded firmware 1st time */
+#define CX18_F_I_EOS			4	/* End of encoder stream */
+#define CX18_F_I_RADIO_USER		5	/* radio tuner is selected */
+#define CX18_F_I_ENC_PAUSED		13	/* the encoder is paused */
+#define CX18_F_I_INITED			21	/* set after first open */
+#define CX18_F_I_FAILED			22	/* set if first open failed */
 
 /* These are the VBI types as they appear in the embedded VBI private packets. */
 #define CX18_SLICED_TYPE_TELETEXT_B     (1)
@@ -370,7 +370,7 @@ struct cx18_stream {
 	   is not actually created. */
 	struct video_device video_dev;	/* v4l2_dev is NULL when stream not created */
 	struct cx18_dvb *dvb;		/* DVB / Digital Transport */
-	struct cx18 *cx; 		/* for ease of use */
+	struct cx18 *cx;		/* for ease of use */
 	const char *name;		/* name of the stream */
 	int type;			/* stream type */
 	u32 handle;			/* task handle */
@@ -525,14 +525,14 @@ struct vbi_info {
 	 * into the MPEG PS stream.
 	 *
 	 * In each sliced_mpeg_data[] buffer is:
-	 * 	16 byte MPEG-2 PS Program Pack Header
-	 * 	16 byte MPEG-2 Private Stream 1 PES Header
-	 * 	 4 byte magic number: "itv0" or "ITV0"
-	 * 	 4 byte first  field line mask, if "itv0"
-	 * 	 4 byte second field line mask, if "itv0"
-	 * 	36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data
+	 *	16 byte MPEG-2 PS Program Pack Header
+	 *	16 byte MPEG-2 Private Stream 1 PES Header
+	 *	 4 byte magic number: "itv0" or "ITV0"
+	 *	 4 byte first  field line mask, if "itv0"
+	 *	 4 byte second field line mask, if "itv0"
+	 *	36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data
 	 *
-	 * 	Each line in the payload is
+	 *	Each line in the payload is
 	 *	 1 byte line header derived from the SDID (WSS, CC, VPS, etc.)
 	 *	42 bytes of line data
 	 *
@@ -583,7 +583,7 @@ struct cx18 {
 	u8 nof_inputs;		/* number of video inputs */
 	u8 nof_audio_inputs;	/* number of audio inputs */
 	u32 v4l2_cap;		/* V4L2 capabilities of card */
-	u32 hw_flags; 		/* Hardware description of the board */
+	u32 hw_flags;		/* Hardware description of the board */
 	unsigned int free_mdl_idx;
 	struct cx18_scb __iomem *scb; /* pointer to SCB */
 	struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/
@@ -602,10 +602,10 @@ struct cx18 {
 	u32 dualwatch_stereo_mode;
 
 	struct mutex serialize_lock;    /* mutex used to serialize open/close/start/stop/ioctl operations */
-	struct cx18_options options; 	/* User options */
+	struct cx18_options options;	/* User options */
 	int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */
 	int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
-	struct cx18_stream streams[CX18_MAX_STREAMS]; 	/* Stream data */
+	struct cx18_stream streams[CX18_MAX_STREAMS];	/* Stream data */
 	struct snd_cx18_card *alsa; /* ALSA interface for PCM capture stream */
 	void (*pcm_announce_callback)(struct snd_cx18_card *card, u8 *pcm_data,
 				      size_t num_bytes);
diff --git a/drivers/media/pci/cx18/cx18-firmware.c b/drivers/media/pci/cx18/cx18-firmware.c
index 1b34ea1c3730..498a1854b3b0 100644
--- a/drivers/media/pci/cx18/cx18-firmware.c
+++ b/drivers/media/pci/cx18/cx18-firmware.c
@@ -23,65 +23,65 @@
 #include "cx18-cards.h"
 #include <linux/firmware.h>
 
-#define CX18_PROC_SOFT_RESET 		0xc70010
-#define CX18_DDR_SOFT_RESET          	0xc70014
-#define CX18_CLOCK_SELECT1           	0xc71000
-#define CX18_CLOCK_SELECT2           	0xc71004
-#define CX18_HALF_CLOCK_SELECT1      	0xc71008
-#define CX18_HALF_CLOCK_SELECT2      	0xc7100C
-#define CX18_CLOCK_POLARITY1         	0xc71010
-#define CX18_CLOCK_POLARITY2         	0xc71014
-#define CX18_ADD_DELAY_ENABLE1       	0xc71018
-#define CX18_ADD_DELAY_ENABLE2       	0xc7101C
-#define CX18_CLOCK_ENABLE1           	0xc71020
-#define CX18_CLOCK_ENABLE2           	0xc71024
-
-#define CX18_REG_BUS_TIMEOUT_EN      	0xc72024
-
-#define CX18_FAST_CLOCK_PLL_INT      	0xc78000
-#define CX18_FAST_CLOCK_PLL_FRAC     	0xc78004
-#define CX18_FAST_CLOCK_PLL_POST     	0xc78008
-#define CX18_FAST_CLOCK_PLL_PRESCALE 	0xc7800C
+#define CX18_PROC_SOFT_RESET		0xc70010
+#define CX18_DDR_SOFT_RESET		0xc70014
+#define CX18_CLOCK_SELECT1		0xc71000
+#define CX18_CLOCK_SELECT2		0xc71004
+#define CX18_HALF_CLOCK_SELECT1		0xc71008
+#define CX18_HALF_CLOCK_SELECT2		0xc7100C
+#define CX18_CLOCK_POLARITY1		0xc71010
+#define CX18_CLOCK_POLARITY2		0xc71014
+#define CX18_ADD_DELAY_ENABLE1		0xc71018
+#define CX18_ADD_DELAY_ENABLE2		0xc7101C
+#define CX18_CLOCK_ENABLE1		0xc71020
+#define CX18_CLOCK_ENABLE2		0xc71024
+
+#define CX18_REG_BUS_TIMEOUT_EN		0xc72024
+
+#define CX18_FAST_CLOCK_PLL_INT		0xc78000
+#define CX18_FAST_CLOCK_PLL_FRAC	0xc78004
+#define CX18_FAST_CLOCK_PLL_POST	0xc78008
+#define CX18_FAST_CLOCK_PLL_PRESCALE	0xc7800C
 #define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010
 
-#define CX18_SLOW_CLOCK_PLL_INT      	0xc78014
-#define CX18_SLOW_CLOCK_PLL_FRAC     	0xc78018
-#define CX18_SLOW_CLOCK_PLL_POST     	0xc7801C
+#define CX18_SLOW_CLOCK_PLL_INT		0xc78014
+#define CX18_SLOW_CLOCK_PLL_FRAC	0xc78018
+#define CX18_SLOW_CLOCK_PLL_POST	0xc7801C
 #define CX18_MPEG_CLOCK_PLL_INT		0xc78040
 #define CX18_MPEG_CLOCK_PLL_FRAC	0xc78044
 #define CX18_MPEG_CLOCK_PLL_POST	0xc78048
-#define CX18_PLL_POWER_DOWN          	0xc78088
+#define CX18_PLL_POWER_DOWN		0xc78088
 #define CX18_SW1_INT_STATUS             0xc73104
 #define CX18_SW1_INT_ENABLE_PCI         0xc7311C
 #define CX18_SW2_INT_SET                0xc73140
 #define CX18_SW2_INT_STATUS             0xc73144
-#define CX18_ADEC_CONTROL            	0xc78120
+#define CX18_ADEC_CONTROL		0xc78120
 
-#define CX18_DDR_REQUEST_ENABLE      	0xc80000
-#define CX18_DDR_CHIP_CONFIG         	0xc80004
-#define CX18_DDR_REFRESH            	0xc80008
-#define CX18_DDR_TIMING1             	0xc8000C
-#define CX18_DDR_TIMING2             	0xc80010
+#define CX18_DDR_REQUEST_ENABLE		0xc80000
+#define CX18_DDR_CHIP_CONFIG		0xc80004
+#define CX18_DDR_REFRESH		0xc80008
+#define CX18_DDR_TIMING1		0xc8000C
+#define CX18_DDR_TIMING2		0xc80010
 #define CX18_DDR_POWER_REG		0xc8001C
 
-#define CX18_DDR_TUNE_LANE           	0xc80048
-#define CX18_DDR_INITIAL_EMRS        	0xc80054
-#define CX18_DDR_MB_PER_ROW_7        	0xc8009C
-#define CX18_DDR_BASE_63_ADDR        	0xc804FC
-
-#define CX18_WMB_CLIENT02            	0xc90108
-#define CX18_WMB_CLIENT05            	0xc90114
-#define CX18_WMB_CLIENT06            	0xc90118
-#define CX18_WMB_CLIENT07            	0xc9011C
-#define CX18_WMB_CLIENT08            	0xc90120
-#define CX18_WMB_CLIENT09            	0xc90124
-#define CX18_WMB_CLIENT10            	0xc90128
-#define CX18_WMB_CLIENT11            	0xc9012C
-#define CX18_WMB_CLIENT12            	0xc90130
-#define CX18_WMB_CLIENT13            	0xc90134
-#define CX18_WMB_CLIENT14            	0xc90138
-
-#define CX18_DSP0_INTERRUPT_MASK     	0xd0004C
+#define CX18_DDR_TUNE_LANE		0xc80048
+#define CX18_DDR_INITIAL_EMRS		0xc80054
+#define CX18_DDR_MB_PER_ROW_7		0xc8009C
+#define CX18_DDR_BASE_63_ADDR		0xc804FC
+
+#define CX18_WMB_CLIENT02		0xc90108
+#define CX18_WMB_CLIENT05		0xc90114
+#define CX18_WMB_CLIENT06		0xc90118
+#define CX18_WMB_CLIENT07		0xc9011C
+#define CX18_WMB_CLIENT08		0xc90120
+#define CX18_WMB_CLIENT09		0xc90124
+#define CX18_WMB_CLIENT10		0xc90128
+#define CX18_WMB_CLIENT11		0xc9012C
+#define CX18_WMB_CLIENT12		0xc90130
+#define CX18_WMB_CLIENT13		0xc90134
+#define CX18_WMB_CLIENT14		0xc90138
+
+#define CX18_DSP0_INTERRUPT_MASK	0xd0004C
 
 #define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
 #define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
@@ -229,7 +229,7 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)
 	 * would ideally be:
 	 *
 	 * NTSC Color subcarrier freq * 8 =
-	 * 	4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+	 *	4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
 	 *
 	 * The accidents of history and rationale that explain from where this
 	 * combination of magic numbers originate can be found in:
diff --git a/drivers/media/pci/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c
index 763f960fc918..f66dd63e1994 100644
--- a/drivers/media/pci/cx18/cx18-mailbox.c
+++ b/drivers/media/pci/cx18/cx18-mailbox.c
@@ -35,7 +35,7 @@ struct cx18_api_info {
 	u32 cmd;
 	u8 flags;		/* Flags, see above */
 	u8 rpu;			/* Processing unit */
-	const char *name; 	/* The name of the command */
+	const char *name;	/* The name of the command */
 };
 
 #define API_ENTRY(rpu, x, f) { (x), (f), (rpu), #x }
@@ -43,9 +43,9 @@ struct cx18_api_info {
 static const struct cx18_api_info api_info[] = {
 	/* MPEG encoder API */
 	API_ENTRY(CPU, CX18_CPU_SET_CHANNEL_TYPE,		0),
-	API_ENTRY(CPU, CX18_EPU_DEBUG, 				0),
-	API_ENTRY(CPU, CX18_CREATE_TASK, 			0),
-	API_ENTRY(CPU, CX18_DESTROY_TASK, 			0),
+	API_ENTRY(CPU, CX18_EPU_DEBUG,				0),
+	API_ENTRY(CPU, CX18_CREATE_TASK,			0),
+	API_ENTRY(CPU, CX18_DESTROY_TASK,			0),
 	API_ENTRY(CPU, CX18_CPU_CAPTURE_START,                  API_SLOW),
 	API_ENTRY(CPU, CX18_CPU_CAPTURE_STOP,                   API_SLOW),
 	API_ENTRY(CPU, CX18_CPU_CAPTURE_PAUSE,                  0),
diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c
index b9c6831c21c3..a594cfdeca20 100644
--- a/drivers/media/pci/cx18/cx18-streams.c
+++ b/drivers/media/pci/cx18/cx18-streams.c
@@ -29,7 +29,7 @@
 #include "cx18-scb.h"
 #include "cx18-dvb.h"
 
-#define CX18_DSP0_INTERRUPT_MASK     	0xd0004C
+#define CX18_DSP0_INTERRUPT_MASK	0xd0004C
 
 static const struct v4l2_file_operations cx18_v4l2_enc_fops = {
 	.owner = THIS_MODULE,
diff --git a/drivers/media/pci/cx18/cx18-vbi.c b/drivers/media/pci/cx18/cx18-vbi.c
index 72c74d60c6fb..81f1e27436fd 100644
--- a/drivers/media/pci/cx18/cx18-vbi.c
+++ b/drivers/media/pci/cx18/cx18-vbi.c
@@ -47,7 +47,7 @@ static void copy_vbi_data(struct cx18 *cx, int lines, u32 pts_stamp)
 		0x00, 0x00, 0x01, 0xbd,		    /* Priv Stream 1 start */
 		0x00, 0x1a,			    /* length */
 		0x84, 0x80, 0x07,		    /* flags, hdr data len */
-		0x21, 0x00, 0x5d, 0x63, 0xa7, 	    /* PTS, markers */
+		0x21, 0x00, 0x5d, 0x63, 0xa7,	    /* PTS, markers */
 		0xff, 0xff			    /* stuffing */
 	};
 	const int sd = sizeof(mpeg_hdr_data);	/* start of vbi data */
diff --git a/drivers/media/pci/cx18/cx23418.h b/drivers/media/pci/cx18/cx23418.h
index 901ed7fac10f..15205b662952 100644
--- a/drivers/media/pci/cx18/cx23418.h
+++ b/drivers/media/pci/cx18/cx23418.h
@@ -19,10 +19,10 @@
 
 #include <media/drv-intf/cx2341x.h>
 
-#define MGR_CMD_MASK            		0x40000000
+#define MGR_CMD_MASK				0x40000000
 /* The MSB of the command code indicates that this is the completion of a
    command */
-#define MGR_CMD_MASK_ACK        		(MGR_CMD_MASK | 0x80000000)
+#define MGR_CMD_MASK_ACK			(MGR_CMD_MASK | 0x80000000)
 
 /* Description: This command creates a new instance of a certain task
    IN[0]  - Task ID. This is one of the XPU_CMD_MASK_YYY where XPU is
@@ -30,26 +30,26 @@
    OUT[0] - Task handle. This handle is passed along with commands to
 	    dispatch to the right instance of the task
    ReturnCode - One of the ERR_SYS_... */
-#define CX18_CREATE_TASK      			(MGR_CMD_MASK | 0x0001)
+#define CX18_CREATE_TASK			(MGR_CMD_MASK | 0x0001)
 
 /* Description: This command destroys an instance of a task
    IN[0] - Task handle. Hanlde of the task to destroy
    ReturnCode - One of the ERR_SYS_... */
-#define CX18_DESTROY_TASK     			(MGR_CMD_MASK | 0x0002)
+#define CX18_DESTROY_TASK			(MGR_CMD_MASK | 0x0002)
 
 /* All commands for CPU have the following mask set */
-#define CPU_CMD_MASK                        	0x20000000
-#define CPU_CMD_MASK_DEBUG       		(CPU_CMD_MASK | 0x00000000)
-#define CPU_CMD_MASK_ACK                    	(CPU_CMD_MASK | 0x80000000)
-#define CPU_CMD_MASK_CAPTURE                	(CPU_CMD_MASK | 0x00020000)
-#define CPU_CMD_MASK_TS                     	(CPU_CMD_MASK | 0x00040000)
+#define CPU_CMD_MASK				0x20000000
+#define CPU_CMD_MASK_DEBUG			(CPU_CMD_MASK | 0x00000000)
+#define CPU_CMD_MASK_ACK			(CPU_CMD_MASK | 0x80000000)
+#define CPU_CMD_MASK_CAPTURE			(CPU_CMD_MASK | 0x00020000)
+#define CPU_CMD_MASK_TS				(CPU_CMD_MASK | 0x00040000)
 
-#define EPU_CMD_MASK                        	0x02000000
-#define EPU_CMD_MASK_DEBUG       		(EPU_CMD_MASK | 0x000000)
-#define EPU_CMD_MASK_DE                     	(EPU_CMD_MASK | 0x040000)
+#define EPU_CMD_MASK				0x02000000
+#define EPU_CMD_MASK_DEBUG			(EPU_CMD_MASK | 0x000000)
+#define EPU_CMD_MASK_DE				(EPU_CMD_MASK | 0x040000)
 
-#define APU_CMD_MASK 				0x10000000
-#define APU_CMD_MASK_ACK 			(APU_CMD_MASK | 0x80000000)
+#define APU_CMD_MASK				0x10000000
+#define APU_CMD_MASK_ACK			(APU_CMD_MASK | 0x80000000)
 
 #define CX18_APU_ENCODING_METHOD_MPEG		(0 << 28)
 #define CX18_APU_ENCODING_METHOD_AC3		(1 << 28)
@@ -67,7 +67,7 @@
 
 /* Description: Command APU to reset the AI
    ReturnCode - ??? */
-#define CX18_APU_RESETAI 			(APU_CMD_MASK | 0x05)
+#define CX18_APU_RESETAI			(APU_CMD_MASK | 0x05)
 
 /* Description: This command indicates that a Memory Descriptor List has been
    filled with the requested channel type
@@ -75,13 +75,13 @@
    IN[1] - Offset of the MDL_ACK from the beginning of the local DDR.
    IN[2] - Number of CNXT_MDL_ACK structures in the array pointed to by IN[1]
    ReturnCode - One of the ERR_DE_... */
-#define CX18_EPU_DMA_DONE              		(EPU_CMD_MASK_DE | 0x0001)
+#define CX18_EPU_DMA_DONE			(EPU_CMD_MASK_DE | 0x0001)
 
 /* Something interesting happened
    IN[0] - A value to log
    IN[1] - An offset of a string in the MiniMe memory;
 	   0/zero/NULL means "I have nothing to say" */
-#define CX18_EPU_DEBUG 				(EPU_CMD_MASK_DEBUG | 0x0003)
+#define CX18_EPU_DEBUG				(EPU_CMD_MASK_DEBUG | 0x0003)
 
 /* Reads memory/registers (32-bit)
    IN[0] - Address
@@ -91,40 +91,40 @@
 /* Description: This command starts streaming with the set channel type
    IN[0] - Task handle. Handle of the task to start
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_START               	(CPU_CMD_MASK_CAPTURE | 0x0002)
+#define CX18_CPU_CAPTURE_START			(CPU_CMD_MASK_CAPTURE | 0x0002)
 
 /* Description: This command stops streaming with the set channel type
    IN[0] - Task handle. Handle of the task to stop
    IN[1] - 0 = stop at end of GOP, 1 = stop at end of frame (MPEG only)
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_STOP                	(CPU_CMD_MASK_CAPTURE | 0x0003)
+#define CX18_CPU_CAPTURE_STOP			(CPU_CMD_MASK_CAPTURE | 0x0003)
 
 /* Description: This command pauses streaming with the set channel type
    IN[0] - Task handle. Handle of the task to pause
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_PAUSE               	(CPU_CMD_MASK_CAPTURE | 0x0007)
+#define CX18_CPU_CAPTURE_PAUSE			(CPU_CMD_MASK_CAPTURE | 0x0007)
 
 /* Description: This command resumes streaming with the set channel type
    IN[0] - Task handle. Handle of the task to resume
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_CAPTURE_RESUME              	(CPU_CMD_MASK_CAPTURE | 0x0008)
-
-#define CAPTURE_CHANNEL_TYPE_NONE  		0
-#define CAPTURE_CHANNEL_TYPE_MPEG  		1
-#define CAPTURE_CHANNEL_TYPE_INDEX 		2
-#define CAPTURE_CHANNEL_TYPE_YUV   		3
-#define CAPTURE_CHANNEL_TYPE_PCM   		4
-#define CAPTURE_CHANNEL_TYPE_VBI   		5
+#define CX18_CPU_CAPTURE_RESUME			(CPU_CMD_MASK_CAPTURE | 0x0008)
+
+#define CAPTURE_CHANNEL_TYPE_NONE		0
+#define CAPTURE_CHANNEL_TYPE_MPEG		1
+#define CAPTURE_CHANNEL_TYPE_INDEX		2
+#define CAPTURE_CHANNEL_TYPE_YUV		3
+#define CAPTURE_CHANNEL_TYPE_PCM		4
+#define CAPTURE_CHANNEL_TYPE_VBI		5
 #define CAPTURE_CHANNEL_TYPE_SLICED_VBI		6
 #define CAPTURE_CHANNEL_TYPE_TS			7
-#define CAPTURE_CHANNEL_TYPE_MAX   		15
+#define CAPTURE_CHANNEL_TYPE_MAX		15
 
 /* Description: This command sets the channel type. This can only be done
    when stopped.
    IN[0] - Task handle. Handle of the task to start
    IN[1] - Channel Type. See Below.
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_CHANNEL_TYPE      		(CPU_CMD_MASK_CAPTURE + 1)
+#define CX18_CPU_SET_CHANNEL_TYPE		(CPU_CMD_MASK_CAPTURE + 1)
 
 /* Description: Set stream output type
    IN[0] - task handle. Handle of the task to start
@@ -140,7 +140,7 @@
    IN[4] - reserved
    IN[5] - frame rate, 0 - 29.97f/s, 1 - 25f/s
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_VIDEO_IN                	(CPU_CMD_MASK_CAPTURE | 0x0004)
+#define CX18_CPU_SET_VIDEO_IN			(CPU_CMD_MASK_CAPTURE | 0x0004)
 
 /* Description: Set video frame rate
    IN[0] - task handle. Handle of the task to start
@@ -149,7 +149,7 @@
    IN[3] - video peak rate
    IN[4] - system mux rate
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_VIDEO_RATE              	(CPU_CMD_MASK_CAPTURE | 0x0005)
+#define CX18_CPU_SET_VIDEO_RATE			(CPU_CMD_MASK_CAPTURE | 0x0005)
 
 /* Description: Set video output resolution
    IN[0] - task handle
@@ -166,7 +166,7 @@
 				3 = horizontal/vertical, 4 = diagonal
    IN[3] - strength, temporal 0 - 31, spatial 0 - 15
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_FILTER_PARAM            	(CPU_CMD_MASK_CAPTURE | 0x0009)
+#define CX18_CPU_SET_FILTER_PARAM		(CPU_CMD_MASK_CAPTURE | 0x0009)
 
 /* Description: This command set spatial filter type
    IN[0] - Task handle.
@@ -174,7 +174,7 @@
 		      3 = 2D H/V separable, 4 = 2D symmetric non-separable
    IN[2] - chroma type: 0 - disable, 1 = 1D horizontal
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_SPATIAL_FILTER_TYPE     	(CPU_CMD_MASK_CAPTURE | 0x000C)
+#define CX18_CPU_SET_SPATIAL_FILTER_TYPE	(CPU_CMD_MASK_CAPTURE | 0x000C)
 
 /* Description: This command set coring levels for median filter
    IN[0] - Task handle.
@@ -183,16 +183,16 @@
    IN[3] - chroma_high
    IN[4] - chroma_low
    ReturnCode - One of the ERR_CAPTURE_... */
-#define CX18_CPU_SET_MEDIAN_CORING           	(CPU_CMD_MASK_CAPTURE | 0x000E)
+#define CX18_CPU_SET_MEDIAN_CORING		(CPU_CMD_MASK_CAPTURE | 0x000E)
 
 /* Description: This command set the picture type mask for index file
    IN[0] - Task handle (ignored by firmware)
-   IN[1] - 	0 = disable index file output
+   IN[1] -	0 = disable index file output
 			1 = output I picture
 			2 = P picture
 			4 = B picture
 			other = illegal */
-#define CX18_CPU_SET_INDEXTABLE         	(CPU_CMD_MASK_CAPTURE | 0x0010)
+#define CX18_CPU_SET_INDEXTABLE			(CPU_CMD_MASK_CAPTURE | 0x0010)
 
 /* Description: Set audio parameters
    IN[0] - task handle. Handle of the task to start
@@ -218,7 +218,7 @@
 /* Description: Set stream output type
    IN[0] - task handle. Handle of the task to start
    IN[1] - subType
-	    SET_INITIAL_SCR      		1
+	    SET_INITIAL_SCR			1
 	    SET_QUALITY_MODE            2
 	    SET_VIM_PROTECT_MODE        3
 	    SET_PTS_CORRECTION          4
@@ -311,7 +311,7 @@
 			bit 0:	output user data, 1 - enable
 			bit 1:	output private stream, 1 - enable
 			bit 2:	mux option, 0 - in GOP, 1 - in picture
-			bit[7:0] 	private stream ID
+			bit[7:0]	private stream ID
    IN[5] - insertion period while mux option is in picture
    ReturnCode - VBI data offset */
 #define CX18_CPU_SET_SLICED_VBI_PARAM		(CPU_CMD_MASK_CAPTURE | 0x0020)
@@ -344,13 +344,13 @@
 #define CX18_CPU_SET_VFC_PARAM                  (CPU_CMD_MASK_CAPTURE | 0x0023)
 
 /* Below is the list of commands related to the data exchange */
-#define CPU_CMD_MASK_DE 			(CPU_CMD_MASK | 0x040000)
+#define CPU_CMD_MASK_DE				(CPU_CMD_MASK | 0x040000)
 
 /* Description: This command provides the physical base address of the local
    DDR as viewed by EPU
    IN[0] - Physical offset where EPU has the local DDR mapped
    ReturnCode - One of the ERR_DE_... */
-#define CPU_CMD_DE_SetBase 			(CPU_CMD_MASK_DE | 0x0001)
+#define CPU_CMD_DE_SetBase			(CPU_CMD_MASK_DE | 0x0001)
 
 /* Description: This command provides the offsets in the device memory where
    the 2 cx18_mdl_ack blocks reside
@@ -360,7 +360,7 @@
    IN[2] - Offset of the second cx18_mdl_ack from the beginning of the
 	   local DDR.
    ReturnCode - One of the ERR_DE_... */
-#define CX18_CPU_DE_SET_MDL_ACK                	(CPU_CMD_MASK_DE | 0x0002)
+#define CX18_CPU_DE_SET_MDL_ACK			(CPU_CMD_MASK_DE | 0x0002)
 
 /* Description: This command provides the offset to a Memory Descriptor List
    IN[0] - Task handle. Handle of the task to start
@@ -369,13 +369,13 @@
    IN[3] - Buffer ID
    IN[4] - Total buffer length
    ReturnCode - One of the ERR_DE_... */
-#define CX18_CPU_DE_SET_MDL                   	(CPU_CMD_MASK_DE | 0x0005)
+#define CX18_CPU_DE_SET_MDL			(CPU_CMD_MASK_DE | 0x0005)
 
 /* Description: This command requests return of all current Memory
    Descriptor Lists to the driver
    IN[0] - Task handle. Handle of the task to start
    ReturnCode - One of the ERR_DE_... */
-#define CX18_CPU_DE_RELEASE_MDL               	(CPU_CMD_MASK_DE | 0x0006)
+#define CX18_CPU_DE_RELEASE_MDL			(CPU_CMD_MASK_DE | 0x0006)
 
 /* Description: This command signals the cpu that the dat buffer has been
    consumed and ready for re-use.