[media] rename most media/video pci drivers to media/pci

Rename all PCI drivers with their own directory under
drivers/media/video into drivers/media/pci and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 365 insertions, 0 deletions

diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
new file mode 100644
index 000000000000..56066721edc1
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -0,0 +1,365 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared remote control input device
+ *
+ *  Most of this file is
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  However, the cx23885_input_{init,fini} functions contained herein are
+ *  derived from Linux kernel files linux/media/video/.../...-input.c marked as:
+ *
+ *  Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
+ *  Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+ *		       Markus Rechberger <mrechberger@gmail.com>
+ *		       Mauro Carvalho Chehab <mchehab@infradead.org>
+ *		       Sascha Sommer <saschasommer@freenet.de>
+ *  Copyright (C) 2004, 2005 Chris Pascoe
+ *  Copyright (C) 2003, 2004 Gerd Knorr
+ *  Copyright (C) 2003 Pavel Machek
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <media/rc-core.h>
+#include <media/v4l2-subdev.h>
+
+#include "cx23885.h"
+
+#define MODULE_NAME "cx23885"
+
+static void cx23885_input_process_measurements(struct cx23885_dev *dev,
+					       bool overrun)
+{
+	struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
+
+	ssize_t num;
+	int count, i;
+	bool handle = false;
+	struct ir_raw_event ir_core_event[64];
+
+	do {
+		num = 0;
+		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event,
+				 sizeof(ir_core_event), &num);
+
+		count = num / sizeof(struct ir_raw_event);
+
+		for (i = 0; i < count; i++) {
+			ir_raw_event_store(kernel_ir->rc,
+					   &ir_core_event[i]);
+			handle = true;
+		}
+	} while (num != 0);
+
+	if (overrun)
+		ir_raw_event_reset(kernel_ir->rc);
+	else if (handle)
+		ir_raw_event_handle(kernel_ir->rc);
+}
+
+void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
+{
+	struct v4l2_subdev_ir_parameters params;
+	int overrun, data_available;
+
+	if (dev->sd_ir == NULL || events == 0)
+		return;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/*
+		 * The only boards we handle right now.  However other boards
+		 * using the CX2388x integrated IR controller should be similar
+		 */
+		break;
+	default:
+		return;
+	}
+
+	overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN |
+			    V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);
+
+	data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED |
+				   V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);
+
+	if (overrun) {
+		/* If there was a FIFO overrun, stop the device */
+		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+		params.enable = false;
+		/* Mitigate race with cx23885_input_ir_stop() */
+		params.shutdown = atomic_read(&dev->ir_input_stopping);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	}
+
+	if (data_available)
+		cx23885_input_process_measurements(dev, overrun);
+
+	if (overrun) {
+		/* If there was a FIFO overrun, clear & restart the device */
+		params.enable = true;
+		/* Mitigate race with cx23885_input_ir_stop() */
+		params.shutdown = atomic_read(&dev->ir_input_stopping);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	}
+}
+
+static int cx23885_input_ir_start(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev_ir_parameters params;
+
+	if (dev->sd_ir == NULL)
+		return -ENODEV;
+
+	atomic_set(&dev->ir_input_stopping, 0);
+
+	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		*/
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for baseband compatible with both RC-5 and RC-6A */
+		params.modulation = false;
+		/* RC-5:  2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
+		/* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
+		params.max_pulse_width = 3333333; /* ns */
+		/* RC-5:    666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+		/* RC-6A:   333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+		params.noise_filter_min_width = 333333; /* ns */
+		/*
+		 * This board has inverted receive sense:
+		 * mark is received as low logic level;
+		 * falling edges are detected as rising edges; etc.
+		 */
+		params.invert_level = true;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		 */
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for a standard NEC protocol */
+		params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+		params.carrier_range_lower = 33000; /* Hz */
+		params.carrier_range_upper = 43000; /* Hz */
+		params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+		/*
+		 * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+		 * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+		 */
+		params.max_pulse_width = 12378022; /* ns */
+
+		/*
+		 * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+		 * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+		 */
+		params.noise_filter_min_width = 351648; /* ns */
+
+		params.modulation = false;
+		params.invert_level = true;
+		break;
+	}
+	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	return 0;
+}
+
+static int cx23885_input_ir_open(struct rc_dev *rc)
+{
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
+
+	if (kernel_ir->cx == NULL)
+		return -ENODEV;
+
+	return cx23885_input_ir_start(kernel_ir->cx);
+}
+
+static void cx23885_input_ir_stop(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev_ir_parameters params;
+
+	if (dev->sd_ir == NULL)
+		return;
+
+	/*
+	 * Stop the sd_ir subdevice from generating notifications and
+	 * scheduling work.
+	 * It is shutdown this way in order to mitigate a race with
+	 * cx23885_input_rx_work_handler() in the overrun case, which could
+	 * re-enable the subdevice.
+	 */
+	atomic_set(&dev->ir_input_stopping, 1);
+	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	while (params.shutdown == false) {
+		params.enable = false;
+		params.interrupt_enable = false;
+		params.shutdown = true;
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	}
+	flush_work_sync(&dev->cx25840_work);
+	flush_work_sync(&dev->ir_rx_work);
+	flush_work_sync(&dev->ir_tx_work);
+}
+
+static void cx23885_input_ir_close(struct rc_dev *rc)
+{
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
+
+	if (kernel_ir->cx != NULL)
+		cx23885_input_ir_stop(kernel_ir->cx);
+}
+
+int cx23885_input_init(struct cx23885_dev *dev)
+{
+	struct cx23885_kernel_ir *kernel_ir;
+	struct rc_dev *rc;
+	char *rc_map;
+	enum rc_driver_type driver_type;
+	unsigned long allowed_protos;
+
+	int ret;
+
+	/*
+	 * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't
+	 * encapsulated in a v4l2_subdev, then I'm not going to deal with it.
+	 */
+	if (dev->sd_ir == NULL)
+		return -ENODEV;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/* Integrated CX2388[58] IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_TYPE_ALL;
+		/* The grey Hauppauge RC-5 remote */
+		rc_map = RC_MAP_HAUPPAUGE;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_TYPE_NEC;
+		/* The grey Terratec remote with orange buttons */
+		rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
+		break;
+	case CX23885_BOARD_TEVII_S470:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_TYPE_ALL;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TEVII_NEC;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	/* cx23885 board instance kernel IR state */
+	kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL);
+	if (kernel_ir == NULL)
+		return -ENOMEM;
+
+	kernel_ir->cx = dev;
+	kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)",
+				    cx23885_boards[dev->board].name);
+	kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0",
+				    pci_name(dev->pci));
+
+	/* input device */
+	rc = rc_allocate_device();
+	if (!rc) {
+		ret = -ENOMEM;
+		goto err_out_free;
+	}
+
+	kernel_ir->rc = rc;
+	rc->input_name = kernel_ir->name;
+	rc->input_phys = kernel_ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
+	if (dev->pci->subsystem_vendor) {
+		rc->input_id.vendor  = dev->pci->subsystem_vendor;
+		rc->input_id.product = dev->pci->subsystem_device;
+	} else {
+		rc->input_id.vendor  = dev->pci->vendor;
+		rc->input_id.product = dev->pci->device;
+	}
+	rc->dev.parent = &dev->pci->dev;
+	rc->driver_type = driver_type;
+	rc->allowed_protos = allowed_protos;
+	rc->priv = kernel_ir;
+	rc->open = cx23885_input_ir_open;
+	rc->close = cx23885_input_ir_close;
+	rc->map_name = rc_map;
+	rc->driver_name = MODULE_NAME;
+
+	/* Go */
+	dev->kernel_ir = kernel_ir;
+	ret = rc_register_device(rc);
+	if (ret)
+		goto err_out_stop;
+
+	return 0;
+
+err_out_stop:
+	cx23885_input_ir_stop(dev);
+	dev->kernel_ir = NULL;
+	rc_free_device(rc);
+err_out_free:
+	kfree(kernel_ir->phys);
+	kfree(kernel_ir->name);
+	kfree(kernel_ir);
+	return ret;
+}
+
+void cx23885_input_fini(struct cx23885_dev *dev)
+{
+	/* Always stop the IR hardware from generating interrupts */
+	cx23885_input_ir_stop(dev);
+
+	if (dev->kernel_ir == NULL)
+		return;
+	rc_unregister_device(dev->kernel_ir->rc);
+	kfree(dev->kernel_ir->phys);
+	kfree(dev->kernel_ir->name);
+	kfree(dev->kernel_ir);
+	dev->kernel_ir = NULL;
+}