[media] rename drivers/media/IR to drives/media/rc

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 262 insertions, 0 deletions

diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
new file mode 100644
index 000000000000..f5870667a433
--- /dev/null
+++ b/drivers/media/rc/ene_ir.h
@@ -0,0 +1,262 @@
+/*
+ * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS		0	/* hardware status - unused */
+#define ENE_ADDR_HI		1	/* hi byte of register address */
+#define ENE_ADDR_LO		2	/* low byte of register address */
+#define ENE_IO			3	/* read/write window */
+#define ENE_IO_SIZE		4
+
+/* 8 bytes of samples, divided in 2 packets*/
+#define ENE_FW_SAMPLE_BUFFER	0xF8F0	/* sample buffer */
+#define ENE_FW_SAMPLE_SPACE	0x80	/* sample is space */
+#define ENE_FW_PACKET_SIZE	4
+
+/* first firmware flag register */
+#define ENE_FW1			0xF8F8  /* flagr */
+#define	ENE_FW1_ENABLE		0x01	/* enable fw processing */
+#define ENE_FW1_TXIRQ		0x02	/* TX interrupt pending */
+#define ENE_FW1_HAS_EXTRA_BUF	0x04	/* fw uses extra buffer*/
+#define ENE_FW1_EXTRA_BUF_HND	0x08	/* extra buffer handshake bit*/
+#define ENE_FW1_LED_ON		0x10	/* turn on a led */
+
+#define ENE_FW1_WPATTERN	0x20	/* enable wake pattern */
+#define ENE_FW1_WAKE		0x40	/* enable wake from S3 */
+#define ENE_FW1_IRQ		0x80	/* enable interrupt */
+
+/* second firmware flag register */
+#define ENE_FW2			0xF8F9  /* flagw */
+#define ENE_FW2_BUF_WPTR	0x01	/* which half of the buffer to read */
+#define ENE_FW2_RXIRQ		0x04	/* RX IRQ pending*/
+#define ENE_FW2_GP0A		0x08	/* Use GPIO0A for demodulated input */
+#define ENE_FW2_EMMITER1_CONN	0x10	/* TX emmiter 1 connected */
+#define ENE_FW2_EMMITER2_CONN	0x20	/* TX emmiter 2 connected */
+
+#define ENE_FW2_FAN_INPUT	0x40	/* fan input used for demodulated data*/
+#define ENE_FW2_LEARNING	0x80	/* hardware supports learning and TX */
+
+/* firmware RX pointer for new style buffer */
+#define ENE_FW_RX_POINTER	0xF8FA
+
+/* high parts of samples for fan input (8 samples)*/
+#define ENE_FW_SMPL_BUF_FAN	0xF8FB
+#define ENE_FW_SMPL_BUF_FAN_PLS	0x8000	/* combined sample is pulse */
+#define ENE_FW_SMPL_BUF_FAN_MSK	0x0FFF  /* combined sample maximum value */
+#define ENE_FW_SAMPLE_PERIOD_FAN 61	/* fan input has fixed sample period */
+
+/* transmitter ports */
+#define ENE_GPIOFS1		0xFC01
+#define ENE_GPIOFS1_GPIO0D	0x20	/* enable tx output on GPIO0D */
+#define ENE_GPIOFS8		0xFC08
+#define ENE_GPIOFS8_GPIO41	0x02	/* enable tx output on GPIO40 */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ		0xFD09	/* IRQ number */
+#define ENEB_IRQ_UNK1		0xFD17	/* unknown setting = 1 */
+#define ENEB_IRQ_STATUS		0xFD80	/* irq status */
+#define ENEB_IRQ_STATUS_IR	0x20	/* IR irq */
+
+/* fan as input settings */
+#define ENE_FAN_AS_IN1		0xFE30  /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN	0xCD
+#define ENE_FAN_AS_IN2		0xFE31  /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN	0x03
+
+/* IRQ registers block (for revision C,D) */
+#define ENE_IRQ			0xFE9B	/* new irq settings register */
+#define ENE_IRQ_MASK		0x0F	/* irq number mask */
+#define ENE_IRQ_UNK_EN		0x10	/* always enabled */
+#define ENE_IRQ_STATUS		0x20	/* irq status and ACK */
+
+/* CIR Config register #1 */
+#define ENE_CIRCFG		0xFEC0
+#define ENE_CIRCFG_RX_EN	0x01	/* RX enable */
+#define ENE_CIRCFG_RX_IRQ	0x02	/* Enable hardware interrupt */
+#define ENE_CIRCFG_REV_POL	0x04	/* Input polarity reversed */
+#define ENE_CIRCFG_CARR_DEMOD	0x08	/* Enable carrier demodulator */
+
+#define ENE_CIRCFG_TX_EN	0x10	/* TX enable */
+#define ENE_CIRCFG_TX_IRQ	0x20	/* Send interrupt on TX done */
+#define ENE_CIRCFG_TX_POL_REV	0x40	/* TX polarity reversed */
+#define ENE_CIRCFG_TX_CARR	0x80	/* send TX carrier or not */
+
+/* CIR config register #2 */
+#define ENE_CIRCFG2		0xFEC1
+#define ENE_CIRCFG2_RLC		0x00
+#define ENE_CIRCFG2_RC5		0x01
+#define ENE_CIRCFG2_RC6		0x02
+#define ENE_CIRCFG2_NEC		0x03
+#define ENE_CIRCFG2_CARR_DETECT	0x10	/* Enable carrier detection */
+#define ENE_CIRCFG2_GPIO0A	0x20	/* Use GPIO0A instead of GPIO40 for input */
+#define ENE_CIRCFG2_FAST_SAMPL1	0x40	/* Fast leading pulse detection for RC6 */
+#define ENE_CIRCFG2_FAST_SAMPL2	0x80	/* Fast data detection for RC6 */
+
+/* Knobs for protocol decoding - will document when/if will use them */
+#define ENE_CIRPF		0xFEC2
+#define ENE_CIRHIGH		0xFEC3
+#define ENE_CIRBIT		0xFEC4
+#define ENE_CIRSTART		0xFEC5
+#define ENE_CIRSTART2		0xFEC6
+
+/* Actual register which contains RLC RX data - read by firmware */
+#define ENE_CIRDAT_IN		0xFEC7
+
+
+/* RLC configuration - sample period (1us resulution) + idle mode */
+#define ENE_CIRRLC_CFG		0xFEC8
+#define ENE_CIRRLC_CFG_OVERFLOW	0x80	/* interrupt on overflows if set */
+#define ENE_DEFAULT_SAMPLE_PERIOD 50
+
+/* Two byte RLC TX buffer */
+#define ENE_CIRRLC_OUT0		0xFEC9
+#define ENE_CIRRLC_OUT1		0xFECA
+#define ENE_CIRRLC_OUT_PULSE	0x80	/* Transmitted sample is pulse */
+#define ENE_CIRRLC_OUT_MASK	0x7F
+
+
+/* Carrier detect setting
+ * Low nibble  - number of carrier pulses to average
+ * High nibble - number of initial carrier pulses to discard
+ */
+#define ENE_CIRCAR_PULS		0xFECB
+
+/* detected RX carrier period (resolution: 500 ns) */
+#define ENE_CIRCAR_PRD		0xFECC
+#define ENE_CIRCAR_PRD_VALID	0x80	/* data valid content valid */
+
+/* detected RX carrier pulse width (resolution: 500 ns) */
+#define ENE_CIRCAR_HPRD		0xFECD
+
+/* TX period (resolution: 500 ns, minimum 2)*/
+#define ENE_CIRMOD_PRD		0xFECE
+#define ENE_CIRMOD_PRD_POL	0x80	/* TX carrier polarity*/
+
+#define ENE_CIRMOD_PRD_MAX	0x7F	/* 15.87 kHz */
+#define ENE_CIRMOD_PRD_MIN	0x02	/* 1 Mhz */
+
+/* TX pulse width (resolution: 500 ns)*/
+#define ENE_CIRMOD_HPRD		0xFECF
+
+/* Hardware versions */
+#define ENE_ECHV		0xFF00	/* hardware revision */
+#define ENE_PLLFRH		0xFF16
+#define ENE_PLLFRL		0xFF17
+#define ENE_DEFAULT_PLL_FREQ	1000
+
+#define ENE_ECSTS		0xFF1D
+#define ENE_ECSTS_RSRVD		0x04
+
+#define ENE_ECVER_MAJOR		0xFF1E	/* chip version */
+#define ENE_ECVER_MINOR		0xFF1F
+#define ENE_HW_VER_OLD		0xFD00
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME		"ene_ir"
+
+#define ENE_IRQ_RX		1
+#define ENE_IRQ_TX		2
+
+#define  ENE_HW_B		1	/* 3926B */
+#define  ENE_HW_C		2	/* 3926C */
+#define  ENE_HW_D		3	/* 3926D or later */
+
+#define ene_printk(level, text, ...) \
+	printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
+
+#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
+#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
+
+
+#define __dbg(level, format, ...) \
+	do { \
+		if (debug >= level) \
+			printk(KERN_DEBUG ENE_DRIVER_NAME \
+				": " format "\n", ## __VA_ARGS__); \
+	} while (0)
+
+
+#define dbg(format, ...)		__dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...)	__dbg(2, format, ## __VA_ARGS__)
+#define dbg_regs(format, ...)		__dbg(3, format, ## __VA_ARGS__)
+
+#define MS_TO_NS(msec) ((msec) * 1000)
+
+struct ene_device {
+	struct pnp_dev *pnp_dev;
+	struct input_dev *idev;
+	struct ir_dev_props *props;
+
+	/* hw IO settings */
+	long hw_io;
+	int irq;
+	spinlock_t hw_lock;
+
+	/* HW features */
+	int hw_revision;			/* hardware revision */
+	bool hw_use_gpio_0a;			/* gpio0a is demodulated input*/
+	bool hw_extra_buffer;			/* hardware has 'extra buffer' */
+	bool hw_fan_input;			/* fan input is IR data source */
+	bool hw_learning_and_tx_capable;	/* learning & tx capable */
+	int  pll_freq;
+	int buffer_len;
+
+	/* Extra RX buffer location */
+	int extra_buf1_address;
+	int extra_buf1_len;
+	int extra_buf2_address;
+	int extra_buf2_len;
+
+	/* HW state*/
+	int r_pointer;				/* pointer to next sample to read */
+	int w_pointer;				/* pointer to next sample hw will write */
+	bool rx_fan_input_inuse;		/* is fan input in use for rx*/
+	int tx_reg;				/* current reg used for TX */
+	u8  saved_conf1;			/* saved FEC0 reg */
+	unsigned int tx_sample;			/* current sample for TX */
+	bool tx_sample_pulse;			/* current sample is pulse */
+
+	/* TX buffer */
+	int *tx_buffer;				/* input samples buffer*/
+	int tx_pos;				/* position in that bufer */
+	int tx_len;				/* current len of tx buffer */
+	int tx_done;				/* done transmitting */
+						/* one more sample pending*/
+	struct completion tx_complete;		/* TX completion */
+	struct timer_list tx_sim_timer;
+
+	/* TX settings */
+	int tx_period;
+	int tx_duty_cycle;
+	int transmitter_mask;
+
+	/* RX settings */
+	bool learning_mode_enabled;		/* learning input enabled */
+	bool carrier_detect_enabled;		/* carrier detect enabled */
+	int rx_period_adjust;
+	bool rx_enabled;
+};
+
+static int ene_irq_status(struct ene_device *dev);
+static void ene_rx_read_hw_pointer(struct ene_device *dev);