media: usb: fix several typos

Use codespell to fix lots of typos over frontends.

Manually verified to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

17 files changed, 29 insertions, 29 deletions

diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig
index d3b6665c342d..088566e88467 100644
--- a/drivers/media/usb/gspca/Kconfig
+++ b/drivers/media/usb/gspca/Kconfig
@@ -46,7 +46,7 @@ config USB_GSPCA_CPIA1
 	depends on VIDEO_V4L2 && USB_GSPCA
 	help
 	  Say Y here if you want support for USB cameras based on the cpia
-	  CPiA chip. Note that you need atleast version 0.6.4 of libv4l for
+	  CPiA chip. Note that you need at least version 0.6.4 of libv4l for
 	  applications to understand the videoformat generated by this driver.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/gspca/autogain_functions.c b/drivers/media/usb/gspca/autogain_functions.c
index 6dfab2b077f7..f915cc7c0c63 100644
--- a/drivers/media/usb/gspca/autogain_functions.c
+++ b/drivers/media/usb/gspca/autogain_functions.c
@@ -98,7 +98,7 @@ EXPORT_SYMBOL(gspca_expo_autogain);
    80 %) and if that does not help, only then changes exposure. This leads
    to a much more stable image then using the knee algorithm which at
    certain points of the knee graph will only try to adjust exposure,
-   which leads to oscilating as one exposure step is huge.
+   which leads to oscillating as one exposure step is huge.
 
    Returns 0 if no changes were made, 1 if the gain and or exposure settings
    where changed. */
diff --git a/drivers/media/usb/gspca/benq.c b/drivers/media/usb/gspca/benq.c
index 8a8db5eb6d5f..1744591b8ba0 100644
--- a/drivers/media/usb/gspca/benq.c
+++ b/drivers/media/usb/gspca/benq.c
@@ -205,12 +205,12 @@ static void sd_isoc_irq(struct urb *urb)
 		 *	- 80 ba/bb 00 00 = start of image followed by 'ff d8'
 		 *	- 04 ba/bb oo oo = image piece
 		 *		where 'oo oo' is the image offset
-						(not cheked)
+						(not checked)
 		 *	- (other -> bad frame)
 		 * The images are JPEG encoded with full header and
 		 * normal ff escape.
 		 * The end of image ('ff d9') may occur in any URB.
-		 * (not cheked)
+		 * (not checked)
 		 */
 		data = (u8 *) urb0->transfer_buffer
 					+ urb0->iso_frame_desc[i].offset;
diff --git a/drivers/media/usb/gspca/mr97310a.c b/drivers/media/usb/gspca/mr97310a.c
index bea196361215..af454663e295 100644
--- a/drivers/media/usb/gspca/mr97310a.c
+++ b/drivers/media/usb/gspca/mr97310a.c
@@ -520,7 +520,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev)
 	switch (gspca_dev->pixfmt.width) {
 	case 160:
 		data[9] |= 0x04;  /* reg 8, 2:1 scale down from 320 */
-		/* fall thru */
+		/* fall through */
 	case 320:
 	default:
 		data[3] = 0x28;			   /* reg 2, H size/8 */
@@ -530,7 +530,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev)
 		break;
 	case 176:
 		data[9] |= 0x04;  /* reg 8, 2:1 scale down from 352 */
-		/* fall thru */
+		/* fall through */
 	case 352:
 		data[3] = 0x2c;			   /* reg 2, H size/8 */
 		data[4] = 0x48;			   /* reg 3, V size/4 */
@@ -617,10 +617,10 @@ static int start_vga_cam(struct gspca_dev *gspca_dev)
 	switch (gspca_dev->pixfmt.width) {
 	case 160:
 		data[9] |= 0x0c;  /* reg 8, 4:1 scale down */
-		/* fall thru */
+		/* fall through */
 	case 320:
 		data[9] |= 0x04;  /* reg 8, 2:1 scale down */
-		/* fall thru */
+		/* fall through */
 	case 640:
 	default:
 		data[3] = 0x50;  /* reg 2, H size/8 */
@@ -637,7 +637,7 @@ static int start_vga_cam(struct gspca_dev *gspca_dev)
 
 	case 176:
 		data[9] |= 0x04;  /* reg 8, 2:1 scale down */
-		/* fall thru */
+		/* fall through */
 	case 352:
 		data[3] = 0x2c;  /* reg 2, H size */
 		data[4] = 0x48;  /* reg 3, V size */
diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c
index 10fcbe9e8614..f2799e8cb8e7 100644
--- a/drivers/media/usb/gspca/ov519.c
+++ b/drivers/media/usb/gspca/ov519.c
@@ -1945,7 +1945,7 @@ static const struct ov_i2c_regvals norm_8610[] = {
 	{ 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
 	{ 0x63, 0xff },
 	{ 0x64, 0x53 }, /* new windrv 090403 says 0x57,
-			 * maybe thats wrong */
+			 * maybe that's wrong */
 	{ 0x65, 0x00 },
 	{ 0x66, 0x55 },
 	{ 0x67, 0xb0 },
@@ -3658,7 +3658,7 @@ static void ov518_mode_init_regs(struct sd *sd)
 		case SEN_OV7620AE:
 			/*
 			 * HdG: 640x480 needs special handling on device
-			 * revision 2, we check for device revison > 0 to
+			 * revision 2, we check for device revision > 0 to
 			 * avoid regressions, as we don't know the correct
 			 * thing todo for revision 1.
 			 *
diff --git a/drivers/media/usb/gspca/pac_common.h b/drivers/media/usb/gspca/pac_common.h
index 31f2a42af4dd..aae97a5534e3 100644
--- a/drivers/media/usb/gspca/pac_common.h
+++ b/drivers/media/usb/gspca/pac_common.h
@@ -21,7 +21,7 @@
 
 /* We calculate the autogain at the end of the transfer of a frame, at this
    moment a frame with the old settings is being captured and transmitted. So
-   if we adjust the gain or exposure we must ignore atleast the next frame for
+   if we adjust the gain or exposure we must ignore at least the next frame for
    the new settings to come into effect before doing any other adjustments. */
 #define PAC_AUTOGAIN_IGNORE_FRAMES	2
 
diff --git a/drivers/media/usb/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c
index 5984bb12bcff..ab912903f8d7 100644
--- a/drivers/media/usb/gspca/sn9c20x.c
+++ b/drivers/media/usb/gspca/sn9c20x.c
@@ -1634,7 +1634,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		break;
 	case SENSOR_HV7131R:
 		sd->i2c_intf = 0x81;			/* i2c 400 Kb/s */
-		/* fall thru */
+		/* fall through */
 	default:
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c
index 5f3f2979540a..583c9f10198c 100644
--- a/drivers/media/usb/gspca/sonixb.c
+++ b/drivers/media/usb/gspca/sonixb.c
@@ -121,7 +121,7 @@ struct sensor_data {
 
 /* We calculate the autogain at the end of the transfer of a frame, at this
    moment a frame with the old settings is being captured and transmitted. So
-   if we adjust the gain or exposure we must ignore atleast the next frame for
+   if we adjust the gain or exposure we must ignore at least the next frame for
    the new settings to come into effect before doing any other adjustments. */
 #define AUTOGAIN_IGNORE_FRAMES 1
 
@@ -757,7 +757,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
 
 		/* Don't allow this to get below 10 when using autogain, the
 		   steps become very large (relatively) when below 10 causing
-		   the image to oscilate from much too dark, to much too bright
+		   the image to oscillate from much too dark, to much too bright
 		   and back again. */
 		if (gspca_dev->autogain->val && reg10 < 10)
 			reg10 = 10;
diff --git a/drivers/media/usb/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c
index df8d8482b795..a63f155f1515 100644
--- a/drivers/media/usb/gspca/sonixj.c
+++ b/drivers/media/usb/gspca/sonixj.c
@@ -2677,7 +2677,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	 * which is 62 bytes long and is followed by various information
 	 * including statuses and luminosity.
 	 *
-	 * A marker may be splitted on two packets.
+	 * A marker may be split on two packets.
 	 *
 	 * The 6th byte of a marker contains the bits:
 	 *	0x08: USB full
diff --git a/drivers/media/usb/gspca/spca501.c b/drivers/media/usb/gspca/spca501.c
index 2cce74b166d8..3d215952af18 100644
--- a/drivers/media/usb/gspca/spca501.c
+++ b/drivers/media/usb/gspca/spca501.c
@@ -574,7 +574,7 @@ static const __u16 spca501_3com_open_data[][3] = {
 	{0x0, 0x0001, 0x0010},	/* TG Start Clock */
 
 /*	{0x2, 0x006a, 0x0001},	 * C/S Enable ISOSYNCH Packet Engine */
-	{0x2, 0x0068, 0x0001},	/* C/S Diable ISOSYNCH Packet Engine */
+	{0x2, 0x0068, 0x0001},	/* C/S Disable ISOSYNCH Packet Engine */
 	{0x2, 0x0000, 0x0005},
 	{0x2, 0x0043, 0x0000},	/* C/S Set Timing Mode, Disable TG soft reset */
 	{0x2, 0x0043, 0x0000},	/* C/S Set Timing Mode, Disable TG soft reset */
diff --git a/drivers/media/usb/gspca/sq905.c b/drivers/media/usb/gspca/sq905.c
index ffea9c35b0a0..d5c48216deb7 100644
--- a/drivers/media/usb/gspca/sq905.c
+++ b/drivers/media/usb/gspca/sq905.c
@@ -18,7 +18,7 @@
  * History and Acknowledgments
  *
  * The original Linux driver for SQ905 based cameras was written by
- * Marcell Lengyel and furter developed by many other contributors
+ * Marcell Lengyel and further developed by many other contributors
  * and is available from http://sourceforge.net/projects/sqcam/
  *
  * This driver takes advantage of the reverse engineering work done for
diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c
index 437a3367ab97..e1e2a605a46c 100644
--- a/drivers/media/usb/gspca/sunplus.c
+++ b/drivers/media/usb/gspca/sunplus.c
@@ -555,7 +555,7 @@ static void init_ctl_reg(struct gspca_dev *gspca_dev)
 	case BRIDGE_SPCA504:
 	case BRIDGE_SPCA504C:
 		pollreg = 0;
-		/* fall thru */
+		/* fall through */
 	default:
 /*	case BRIDGE_SPCA533: */
 /*	case BRIDGE_SPCA504B: */
@@ -638,7 +638,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00);
 		reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13);
 		reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00);
-		/* fall thru */
+		/* fall through */
 	case BRIDGE_SPCA533:
 		spca504B_PollingDataReady(gspca_dev);
 		spca50x_GetFirmware(gspca_dev);
diff --git a/drivers/media/usb/gspca/t613.c b/drivers/media/usb/gspca/t613.c
index 445782919446..ed9b925b723e 100644
--- a/drivers/media/usb/gspca/t613.c
+++ b/drivers/media/usb/gspca/t613.c
@@ -966,7 +966,7 @@ static int sd_init_controls(struct gspca_dev *gspca_dev)
 			V4L2_CID_SATURATION, 0, 0xf, 1, 5);
 	v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 			V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 10);
-	/* Activate lowlight, some apps dont bring up the
+	/* Activate lowlight, some apps don't bring up the
 	   backlight_compensation control) */
 	v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
 			V4L2_CID_BACKLIGHT_COMPENSATION, 0, 1, 1, 1);
diff --git a/drivers/media/usb/gspca/touptek.c b/drivers/media/usb/gspca/touptek.c
index d1b9032d7863..6c056a448231 100644
--- a/drivers/media/usb/gspca/touptek.c
+++ b/drivers/media/usb/gspca/touptek.c
@@ -185,7 +185,7 @@ static const struct v4l2_pix_format vga_mode[] = {
 };
 
 /*
- * As theres no known frame sync, the only way to keep synced is to try hard
+ * As there's no known frame sync, the only way to keep synced is to try hard
  * to never miss any packets
  */
 #if MAX_NURBS < 4
@@ -259,7 +259,7 @@ static void setexposure(struct gspca_dev *gspca_dev, s32 val)
 		return;
 	}
 	gspca_dbg(gspca_dev, D_STREAM, "exposure: 0x%04X ms\n\n", value);
-	/* Wonder if theres a good reason for sending it twice */
+	/* Wonder if there's a good reason for sending it twice */
 	/* probably not but leave it in because...why not */
 	reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
 	reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
diff --git a/drivers/media/usb/gspca/w996Xcf.c b/drivers/media/usb/gspca/w996Xcf.c
index abfab3de1866..36cc5a5ce77a 100644
--- a/drivers/media/usb/gspca/w996Xcf.c
+++ b/drivers/media/usb/gspca/w996Xcf.c
@@ -431,7 +431,7 @@ static void w9968cf_set_crop_window(struct sd *sd)
 		start_cropy = 35;
 	}
 
-	/* Work around to avoid FP arithmetics */
+	/* Work around to avoid FP arithmetic */
 	#define SC(x) ((x) << 10)
 
 	/* Scaling factors */
diff --git a/drivers/media/usb/gspca/zc3xx-reg.h b/drivers/media/usb/gspca/zc3xx-reg.h
index 71fda38e85e0..26f6153b687f 100644
--- a/drivers/media/usb/gspca/zc3xx-reg.h
+++ b/drivers/media/usb/gspca/zc3xx-reg.h
@@ -26,7 +26,7 @@
 /* Test mode */
 #define ZC3XX_R00B_TESTMODECONTROL     0x000b
 
-/* Frame retreiving */
+/* Frame retrieving */
 #define ZC3XX_R00C_LASTACQTIME         0x000c
 #define ZC3XX_R00D_MONITORRES          0x000d
 #define ZC3XX_R00E_TIMESTAMPHIGH       0x000e
diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c
index cf21991e3d99..ad7194029031 100644
--- a/drivers/media/usb/gspca/zc3xx.c
+++ b/drivers/media/usb/gspca/zc3xx.c
@@ -3602,7 +3602,7 @@ static const struct usb_action pas106b_InitialScale[] = {	/* 176x144 */
 	{0xaa, 0x14, 0x0081},
 /* Other registers */
 	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
-/* Frame retreiving */
+/* Frame retrieving */
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 /* Gains */
 	{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
@@ -3718,7 +3718,7 @@ static const struct usb_action pas106b_Initial[] = {	/* 352x288 */
 	{0xaa, 0x14, 0x0081},
 /* Other registers */
 	{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
-/* Frame retreiving */
+/* Frame retrieving */
 	{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
 /* Gains */
 	{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
@@ -6775,7 +6775,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_HV7131R:
 	case SENSOR_TAS5130C:
 		reg_r(gspca_dev, 0x0008);
-		/* fall thru */
+		/* fall through */
 	case SENSOR_PO2030:
 		reg_w(gspca_dev, 0x03, 0x0008);
 		break;
@@ -6824,7 +6824,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_TAS5130C:
 		reg_w(gspca_dev, 0x09, 0x01ad);	/* (from win traces) */
 		reg_w(gspca_dev, 0x15, 0x01ae);
-		/* fall thru */
+		/* fall through */
 	case SENSOR_PAS202B:
 	case SENSOR_PO2030:
 /*		reg_w(gspca_dev, 0x40, ZC3XX_R117_GGAIN); in win traces */