Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 207 insertions, 245 deletions

diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 9e39bc5f7b00..3c9e754d73a0 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -80,8 +80,8 @@ OTHER DEALINGS IN THE SOFTWARE.
 
 #include "bw-qcam.h"
 
-static unsigned int maxpoll=250;   /* Maximum busy-loop count for qcam I/O */
-static unsigned int yieldlines=4;  /* Yield after this many during capture */
+static unsigned int maxpoll = 250;   /* Maximum busy-loop count for qcam I/O */
+static unsigned int yieldlines = 4;  /* Yield after this many during capture */
 static int video_nr = -1;
 static unsigned int force_init;		/* Whether to probe aggressively */
 
@@ -156,7 +156,7 @@ static int qc_calibrate(struct qcam_device *q)
 		mdelay(1);
 		schedule();
 		count++;
-	} while (value == 0xff && count<2048);
+	} while (value == 0xff && count < 2048);
 
 	q->whitebal = value;
 	return value;
@@ -170,16 +170,15 @@ static struct qcam_device *qcam_init(struct parport *port)
 	struct qcam_device *q;
 
 	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
-	if(q==NULL)
+	if (q == NULL)
 		return NULL;
 
 	q->pport = port;
 	q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
-					  NULL, 0, NULL);
-	if (q->pdev == NULL)
-	{
+			NULL, 0, NULL);
+	if (q->pdev == NULL) {
 		printk(KERN_ERR "bw-qcam: couldn't register for %s.\n",
-		       port->name);
+				port->name);
 		kfree(q);
 		return NULL;
 	}
@@ -247,12 +246,10 @@ static int qc_readparam(struct qcam_device *q)
 static int qc_waithand(struct qcam_device *q, int val)
 {
 	int status;
-	int runs=0;
+	int runs = 0;
 
-	if (val)
-	{
-		while (!((status = read_lpstatus(q)) & 8))
-		{
+	if (val) {
+		while (!((status = read_lpstatus(q)) & 8)) {
 			/* 1000 is enough spins on the I/O for all normal
 			   cases, at that point we start to poll slowly
 			   until the camera wakes up. However, we are
@@ -260,18 +257,13 @@ static int qc_waithand(struct qcam_device *q, int val)
 			   setting it lower is much better for interactive
 			   response. */
 
-			if(runs++>maxpoll)
-			{
+			if (runs++ > maxpoll)
 				msleep_interruptible(5);
-			}
-			if(runs>(maxpoll+1000)) /* 5 seconds */
+			if (runs > (maxpoll + 1000)) /* 5 seconds */
 				return -1;
 		}
-	}
-	else
-	{
-		while (((status = read_lpstatus(q)) & 8))
-		{
+	} else {
+		while (((status = read_lpstatus(q)) & 8)) {
 			/* 1000 is enough spins on the I/O for all normal
 			   cases, at that point we start to poll slowly
 			   until the camera wakes up. However, we are
@@ -279,11 +271,9 @@ static int qc_waithand(struct qcam_device *q, int val)
 			   setting it lower is much better for interactive
 			   response. */
 
-			if(runs++>maxpoll)
-			{
+			if (runs++ > maxpoll)
 				msleep_interruptible(5);
-			}
-			if(runs++>(maxpoll+1000)) /* 5 seconds */
+			if (runs++ > (maxpoll + 1000)) /* 5 seconds */
 				return -1;
 		}
 	}
@@ -299,10 +289,9 @@ static int qc_waithand(struct qcam_device *q, int val)
 static unsigned int qc_waithand2(struct qcam_device *q, int val)
 {
 	unsigned int status;
-	int runs=0;
+	int runs = 0;
 
-	do
-	{
+	do {
 		status = read_lpdata(q);
 		/* 1000 is enough spins on the I/O for all normal
 		   cases, at that point we start to poll slowly
@@ -311,14 +300,11 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val)
 		   setting it lower is much better for interactive
 		   response. */
 
-		if(runs++>maxpoll)
-		{
+		if (runs++ > maxpoll)
 			msleep_interruptible(5);
-		}
-		if(runs++>(maxpoll+1000)) /* 5 seconds */
+		if (runs++ > (maxpoll + 1000)) /* 5 seconds */
 			return 0;
-	}
-	while ((status & 1) != val);
+	} while ((status & 1) != val);
 
 	return status;
 }
@@ -342,8 +328,7 @@ static int qc_detect(struct qcam_device *q)
 
 	lastreg = reg = read_lpstatus(q) & 0xf0;
 
-	for (i = 0; i < 500; i++)
-	{
+	for (i = 0; i < 500; i++) {
 		reg = read_lpstatus(q) & 0xf0;
 		if (reg != lastreg)
 			count++;
@@ -357,7 +342,7 @@ static int qc_detect(struct qcam_device *q)
 	   won't be flashing these bits. Possibly unloading the module
 	   in the middle of a grab? Or some timeout condition?
 	   I've seen this parameter as low as 19 on my 450Mhz box - mpc */
-	printk("Debugging: QCam detection counter <30-200 counts as detected>: %d\n", count);
+	printk(KERN_DEBUG "Debugging: QCam detection counter <30-200 counts as detected>: %d\n", count);
 	return 1;
 #endif
 
@@ -367,7 +352,7 @@ static int qc_detect(struct qcam_device *q)
 		return 1;	/* found */
 	} else {
 		printk(KERN_ERR "No Quickcam found on port %s\n",
-			q->pport->name);
+				q->pport->name);
 		printk(KERN_DEBUG "Quickcam detection counter: %u\n", count);
 		return 0;	/* not found */
 	}
@@ -381,26 +366,24 @@ static int qc_detect(struct qcam_device *q)
 
 static void qc_reset(struct qcam_device *q)
 {
-	switch (q->port_mode & QC_FORCE_MASK)
-	{
-		case QC_FORCE_UNIDIR:
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-			break;
+	switch (q->port_mode & QC_FORCE_MASK) {
+	case QC_FORCE_UNIDIR:
+		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+		break;
 
-		case QC_FORCE_BIDIR:
-			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-			break;
+	case QC_FORCE_BIDIR:
+		q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+		break;
 
-		case QC_ANY:
-			write_lpcontrol(q, 0x20);
-			write_lpdata(q, 0x75);
+	case QC_ANY:
+		write_lpcontrol(q, 0x20);
+		write_lpdata(q, 0x75);
 
-			if (read_lpdata(q) != 0x75) {
-				q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
-			} else {
-				q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
-			}
-			break;
+		if (read_lpdata(q) != 0x75)
+			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
+		else
+			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
+		break;
 	}
 
 	write_lpcontrol(q, 0xb);
@@ -423,36 +406,33 @@ static int qc_setscanmode(struct qcam_device *q)
 {
 	int old_mode = q->mode;
 
-	switch (q->transfer_scale)
-	{
-		case 1:
-			q->mode = 0;
-			break;
-		case 2:
-			q->mode = 4;
-			break;
-		case 4:
-			q->mode = 8;
-			break;
+	switch (q->transfer_scale) {
+	case 1:
+		q->mode = 0;
+		break;
+	case 2:
+		q->mode = 4;
+		break;
+	case 4:
+		q->mode = 8;
+		break;
 	}
 
-	switch (q->bpp)
-	{
-		case 4:
-			break;
-		case 6:
-			q->mode += 2;
-			break;
+	switch (q->bpp) {
+	case 4:
+		break;
+	case 6:
+		q->mode += 2;
+		break;
 	}
 
-	switch (q->port_mode & QC_MODE_MASK)
-	{
-		case QC_BIDIR:
-			q->mode += 1;
-			break;
-		case QC_NOTSET:
-		case QC_UNIDIR:
-			break;
+	switch (q->port_mode & QC_MODE_MASK) {
+	case QC_BIDIR:
+		q->mode += 1;
+		break;
+	case QC_NOTSET:
+	case QC_UNIDIR:
+		break;
 	}
 
 	if (q->mode != old_mode)
@@ -493,7 +473,7 @@ static void qc_set(struct qcam_device *q)
 	} else {
 		val = q->width * q->bpp;
 		val2 = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) *
-		    q->transfer_scale;
+			q->transfer_scale;
 	}
 	val = DIV_ROUND_UP(val, val2);
 	qc_command(q, 0x13);
@@ -521,85 +501,80 @@ static void qc_set(struct qcam_device *q)
 
 static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 {
-	int ret=1;
+	int ret = 1;
 	unsigned int hi, lo;
 	unsigned int hi2, lo2;
 	static int state;
 
-	if (buffer == NULL)
-	{
+	if (buffer == NULL) {
 		state = 0;
 		return 0;
 	}
 
-	switch (q->port_mode & QC_MODE_MASK)
-	{
-		case QC_BIDIR:		/* Bi-directional Port */
-			write_lpcontrol(q, 0x26);
-			lo = (qc_waithand2(q, 1) >> 1);
-			hi = (read_lpstatus(q) >> 3) & 0x1f;
-			write_lpcontrol(q, 0x2e);
-			lo2 = (qc_waithand2(q, 0) >> 1);
-			hi2 = (read_lpstatus(q) >> 3) & 0x1f;
-			switch (q->bpp)
-			{
-				case 4:
-					buffer[0] = lo & 0xf;
-					buffer[1] = ((lo & 0x70) >> 4) | ((hi & 1) << 3);
-					buffer[2] = (hi & 0x1e) >> 1;
-					buffer[3] = lo2 & 0xf;
-					buffer[4] = ((lo2 & 0x70) >> 4) | ((hi2 & 1) << 3);
-					buffer[5] = (hi2 & 0x1e) >> 1;
-					ret = 6;
-					break;
-				case 6:
-					buffer[0] = lo & 0x3f;
-					buffer[1] = ((lo & 0x40) >> 6) | (hi << 1);
-					buffer[2] = lo2 & 0x3f;
-					buffer[3] = ((lo2 & 0x40) >> 6) | (hi2 << 1);
-					ret = 4;
-					break;
-			}
+	switch (q->port_mode & QC_MODE_MASK) {
+	case QC_BIDIR:		/* Bi-directional Port */
+		write_lpcontrol(q, 0x26);
+		lo = (qc_waithand2(q, 1) >> 1);
+		hi = (read_lpstatus(q) >> 3) & 0x1f;
+		write_lpcontrol(q, 0x2e);
+		lo2 = (qc_waithand2(q, 0) >> 1);
+		hi2 = (read_lpstatus(q) >> 3) & 0x1f;
+		switch (q->bpp) {
+		case 4:
+			buffer[0] = lo & 0xf;
+			buffer[1] = ((lo & 0x70) >> 4) | ((hi & 1) << 3);
+			buffer[2] = (hi & 0x1e) >> 1;
+			buffer[3] = lo2 & 0xf;
+			buffer[4] = ((lo2 & 0x70) >> 4) | ((hi2 & 1) << 3);
+			buffer[5] = (hi2 & 0x1e) >> 1;
+			ret = 6;
+			break;
+		case 6:
+			buffer[0] = lo & 0x3f;
+			buffer[1] = ((lo & 0x40) >> 6) | (hi << 1);
+			buffer[2] = lo2 & 0x3f;
+			buffer[3] = ((lo2 & 0x40) >> 6) | (hi2 << 1);
+			ret = 4;
 			break;
+		}
+		break;
+
+	case QC_UNIDIR:	/* Unidirectional Port */
+		write_lpcontrol(q, 6);
+		lo = (qc_waithand(q, 1) & 0xf0) >> 4;
+		write_lpcontrol(q, 0xe);
+		hi = (qc_waithand(q, 0) & 0xf0) >> 4;
 
-		case QC_UNIDIR:	/* Unidirectional Port */
-			write_lpcontrol(q, 6);
-			lo = (qc_waithand(q, 1) & 0xf0) >> 4;
-			write_lpcontrol(q, 0xe);
-			hi = (qc_waithand(q, 0) & 0xf0) >> 4;
-
-			switch (q->bpp)
-			{
-				case 4:
-					buffer[0] = lo;
-					buffer[1] = hi;
-					ret = 2;
-					break;
-				case 6:
-					switch (state)
-					{
-						case 0:
-							buffer[0] = (lo << 2) | ((hi & 0xc) >> 2);
-							q->saved_bits = (hi & 3) << 4;
-							state = 1;
-							ret = 1;
-							break;
-						case 1:
-							buffer[0] = lo | q->saved_bits;
-							q->saved_bits = hi << 2;
-							state = 2;
-							ret = 1;
-							break;
-						case 2:
-							buffer[0] = ((lo & 0xc) >> 2) | q->saved_bits;
-							buffer[1] = ((lo & 3) << 4) | hi;
-							state = 0;
-							ret = 2;
-							break;
-					}
-					break;
+		switch (q->bpp) {
+		case 4:
+			buffer[0] = lo;
+			buffer[1] = hi;
+			ret = 2;
+			break;
+		case 6:
+			switch (state) {
+			case 0:
+				buffer[0] = (lo << 2) | ((hi & 0xc) >> 2);
+				q->saved_bits = (hi & 3) << 4;
+				state = 1;
+				ret = 1;
+				break;
+			case 1:
+				buffer[0] = lo | q->saved_bits;
+				q->saved_bits = hi << 2;
+				state = 2;
+				ret = 1;
+				break;
+			case 2:
+				buffer[0] = ((lo & 0xc) >> 2) | q->saved_bits;
+				buffer[1] = ((lo & 3) << 4) | hi;
+				state = 0;
+				ret = 2;
+				break;
 			}
 			break;
+		}
+		break;
 	}
 	return ret;
 }
@@ -615,7 +590,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
  * n=2^(bit depth)-1.  Ask me for more details if you don't understand
  * this. */
 
-static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long len)
+static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long len)
 {
 	int i, j, k, yield;
 	int bytes;
@@ -623,9 +598,9 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 	int divisor;
 	int pixels_per_line;
 	int pixels_read = 0;
-	int got=0;
+	int got = 0;
 	char buffer[6];
-	int  shift=8-q->bpp;
+	int  shift = 8 - q->bpp;
 	char invert;
 
 	if (q->mode == -1)
@@ -634,13 +609,12 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 	qc_command(q, 0x7);
 	qc_command(q, q->mode);
 
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
-	{
+	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) {
 		write_lpcontrol(q, 0x2e);	/* turn port around */
 		write_lpcontrol(q, 0x26);
-		(void) qc_waithand(q, 1);
+		qc_waithand(q, 1);
 		write_lpcontrol(q, 0x2e);
-		(void) qc_waithand(q, 0);
+		qc_waithand(q, 0);
 	}
 
 	/* strange -- should be 15:63 below, but 4bpp is odd */
@@ -650,33 +624,28 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 	pixels_per_line = q->width / q->transfer_scale;
 	transperline = q->width * q->bpp;
 	divisor = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) *
-	    q->transfer_scale;
+		q->transfer_scale;
 	transperline = DIV_ROUND_UP(transperline, divisor);
 
-	for (i = 0, yield = yieldlines; i < linestotrans; i++)
-	{
-		for (pixels_read = j = 0; j < transperline; j++)
-		{
+	for (i = 0, yield = yieldlines; i < linestotrans; i++) {
+		for (pixels_read = j = 0; j < transperline; j++) {
 			bytes = qc_readbytes(q, buffer);
-			for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++)
-			{
+			for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) {
 				int o;
-				if (buffer[k] == 0 && invert == 16)
-				{
+				if (buffer[k] == 0 && invert == 16) {
 					/* 4bpp is odd (again) -- inverter is 16, not 15, but output
 					   must be 0-15 -- bls */
 					buffer[k] = 16;
 				}
-				o=i*pixels_per_line + pixels_read + k;
-				if(o<len)
-				{
+				o = i * pixels_per_line + pixels_read + k;
+				if (o < len) {
 					got++;
-					put_user((invert - buffer[k])<<shift, buf+o);
+					put_user((invert - buffer[k]) << shift, buf + o);
 				}
 			}
 			pixels_read += bytes;
 		}
-		(void) qc_readbytes(q, NULL);	/* reset state machine */
+		qc_readbytes(q, NULL);	/* reset state machine */
 
 		/* Grabbing an entire frame from the quickcam is a lengthy
 		   process. We don't (usually) want to busy-block the
@@ -690,14 +659,13 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 		}
 	}
 
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
-	{
+	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) {
 		write_lpcontrol(q, 2);
 		write_lpcontrol(q, 6);
 		udelay(3);
 		write_lpcontrol(q, 0xe);
 	}
-	if(got<len)
+	if (got < len)
 		return got;
 	return len;
 }
@@ -709,11 +677,10 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 {
 	struct video_device *dev = video_devdata(file);
-	struct qcam_device *qcam=(struct qcam_device *)dev;
+	struct qcam_device *qcam = (struct qcam_device *)dev;
 
-	switch(cmd)
-	{
-		case VIDIOCGCAP:
+	switch (cmd) {
+	case VIDIOCGCAP:
 		{
 			struct video_capability *b = arg;
 			strcpy(b->name, "Quickcam");
@@ -726,73 +693,73 @@ static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 			b->minheight = 60;
 			return 0;
 		}
-		case VIDIOCGCHAN:
+	case VIDIOCGCHAN:
 		{
 			struct video_channel *v = arg;
-			if(v->channel!=0)
+			if (v->channel != 0)
 				return -EINVAL;
-			v->flags=0;
-			v->tuners=0;
+			v->flags = 0;
+			v->tuners = 0;
 			/* Good question.. its composite or SVHS so.. */
 			v->type = VIDEO_TYPE_CAMERA;
 			strcpy(v->name, "Camera");
 			return 0;
 		}
-		case VIDIOCSCHAN:
+	case VIDIOCSCHAN:
 		{
 			struct video_channel *v = arg;
-			if(v->channel!=0)
+			if (v->channel != 0)
 				return -EINVAL;
 			return 0;
 		}
-		case VIDIOCGTUNER:
+	case VIDIOCGTUNER:
 		{
 			struct video_tuner *v = arg;
-			if(v->tuner)
+			if (v->tuner)
 				return -EINVAL;
 			strcpy(v->name, "Format");
-			v->rangelow=0;
-			v->rangehigh=0;
-			v->flags= 0;
+			v->rangelow = 0;
+			v->rangehigh = 0;
+			v->flags = 0;
 			v->mode = VIDEO_MODE_AUTO;
 			return 0;
 		}
-		case VIDIOCSTUNER:
+	case VIDIOCSTUNER:
 		{
 			struct video_tuner *v = arg;
-			if(v->tuner)
+			if (v->tuner)
 				return -EINVAL;
-			if(v->mode!=VIDEO_MODE_AUTO)
+			if (v->mode != VIDEO_MODE_AUTO)
 				return -EINVAL;
 			return 0;
 		}
-		case VIDIOCGPICT:
+	case VIDIOCGPICT:
 		{
 			struct video_picture *p = arg;
-			p->colour=0x8000;
-			p->hue=0x8000;
-			p->brightness=qcam->brightness<<8;
-			p->contrast=qcam->contrast<<8;
-			p->whiteness=qcam->whitebal<<8;
-			p->depth=qcam->bpp;
-			p->palette=VIDEO_PALETTE_GREY;
+			p->colour = 0x8000;
+			p->hue = 0x8000;
+			p->brightness = qcam->brightness << 8;
+			p->contrast = qcam->contrast << 8;
+			p->whiteness = qcam->whitebal << 8;
+			p->depth = qcam->bpp;
+			p->palette = VIDEO_PALETTE_GREY;
 			return 0;
 		}
-		case VIDIOCSPICT:
+	case VIDIOCSPICT:
 		{
 			struct video_picture *p = arg;
-			if(p->palette!=VIDEO_PALETTE_GREY)
+			if (p->palette != VIDEO_PALETTE_GREY)
 				return -EINVAL;
-			if(p->depth!=4 && p->depth!=6)
+			if (p->depth != 4 && p->depth != 6)
 				return -EINVAL;
 
 			/*
 			 *	Now load the camera.
 			 */
 
-			qcam->brightness = p->brightness>>8;
-			qcam->contrast = p->contrast>>8;
-			qcam->whitebal = p->whiteness>>8;
+			qcam->brightness = p->brightness >> 8;
+			qcam->contrast = p->contrast >> 8;
+			qcam->whitebal = p->whiteness >> 8;
 			qcam->bpp = p->depth;
 
 			mutex_lock(&qcam->lock);
@@ -802,28 +769,25 @@ static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 			return 0;
 		}
-		case VIDIOCSWIN:
+	case VIDIOCSWIN:
 		{
 			struct video_window *vw = arg;
-			if(vw->flags)
+			if (vw->flags)
 				return -EINVAL;
-			if(vw->clipcount)
+			if (vw->clipcount)
 				return -EINVAL;
-			if(vw->height<60||vw->height>240)
+			if (vw->height < 60 || vw->height > 240)
 				return -EINVAL;
-			if(vw->width<80||vw->width>320)
+			if (vw->width < 80 || vw->width > 320)
 				return -EINVAL;
 
 			qcam->width = 320;
 			qcam->height = 240;
 			qcam->transfer_scale = 4;
 
-			if(vw->width>=160 && vw->height>=120)
-			{
+			if (vw->width >= 160 && vw->height >= 120)
 				qcam->transfer_scale = 2;
-			}
-			if(vw->width>=320 && vw->height>=240)
-			{
+			if (vw->width >= 320 && vw->height >= 240) {
 				qcam->width = 320;
 				qcam->height = 240;
 				qcam->transfer_scale = 1;
@@ -839,41 +803,42 @@ static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 			/* Ok we figured out what to use from our wide choice */
 			return 0;
 		}
-		case VIDIOCGWIN:
+	case VIDIOCGWIN:
 		{
 			struct video_window *vw = arg;
+
 			memset(vw, 0, sizeof(*vw));
-			vw->width=qcam->width/qcam->transfer_scale;
-			vw->height=qcam->height/qcam->transfer_scale;
+			vw->width = qcam->width / qcam->transfer_scale;
+			vw->height = qcam->height / qcam->transfer_scale;
 			return 0;
 		}
-		case VIDIOCKEY:
-			return 0;
-		case VIDIOCCAPTURE:
-		case VIDIOCGFBUF:
-		case VIDIOCSFBUF:
-		case VIDIOCGFREQ:
-		case VIDIOCSFREQ:
-		case VIDIOCGAUDIO:
-		case VIDIOCSAUDIO:
-			return -EINVAL;
-		default:
-			return -ENOIOCTLCMD;
+	case VIDIOCKEY:
+		return 0;
+	case VIDIOCCAPTURE:
+	case VIDIOCGFBUF:
+	case VIDIOCSFBUF:
+	case VIDIOCGFREQ:
+	case VIDIOCSFREQ:
+	case VIDIOCGAUDIO:
+	case VIDIOCSAUDIO:
+		return -EINVAL;
+	default:
+		return -ENOIOCTLCMD;
 	}
 	return 0;
 }
 
 static long qcam_ioctl(struct file *file,
-		     unsigned int cmd, unsigned long arg)
+		unsigned int cmd, unsigned long arg)
 {
 	return video_usercopy(file, cmd, arg, qcam_do_ioctl);
 }
 
 static ssize_t qcam_read(struct file *file, char __user *buf,
-			 size_t count, loff_t *ppos)
+		size_t count, loff_t *ppos)
 {
 	struct video_device *v = video_devdata(file);
-	struct qcam_device *qcam=(struct qcam_device *)v;
+	struct qcam_device *qcam = (struct qcam_device *)v;
 	int len;
 	parport_claim_or_block(qcam->pdev);
 
@@ -885,7 +850,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 	if (qcam->status & QC_PARAM_CHANGE)
 		qc_set(qcam);
 
-	len=qc_capture(qcam, buf,count);
+	len = qc_capture(qcam, buf, count);
 
 	mutex_unlock(&qcam->lock);
 
@@ -917,8 +882,7 @@ static const struct v4l2_file_operations qcam_fops = {
 	.ioctl          = qcam_ioctl,
 	.read		= qcam_read,
 };
-static struct video_device qcam_template=
-{
+static struct video_device qcam_template = {
 	.name		= "Connectix Quickcam",
 	.fops           = &qcam_fops,
 	.release 	= video_device_release_empty,
@@ -932,22 +896,20 @@ static int init_bwqcam(struct parport *port)
 {
 	struct qcam_device *qcam;
 
-	if (num_cams == MAX_CAMS)
-	{
+	if (num_cams == MAX_CAMS) {
 		printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS);
 		return -ENOSPC;
 	}
 
-	qcam=qcam_init(port);
-	if(qcam==NULL)
+	qcam = qcam_init(port);
+	if (qcam == NULL)
 		return -ENODEV;
 
 	parport_claim_or_block(qcam->pdev);
 
 	qc_reset(qcam);
 
-	if(qc_detect(qcam)==0)
-	{
+	if (qc_detect(qcam) == 0) {
 		parport_release(qcam->pdev);
 		parport_unregister_device(qcam->pdev);
 		kfree(qcam);
@@ -1045,12 +1007,12 @@ static int __init init_bw_qcams(void)
 #ifdef MODULE
 	/* Do some sanity checks on the module parameters. */
 	if (maxpoll > 5000) {
-		printk("Connectix Quickcam max-poll was above 5000. Using 5000.\n");
+		printk(KERN_INFO "Connectix Quickcam max-poll was above 5000. Using 5000.\n");
 		maxpoll = 5000;
 	}
 
 	if (yieldlines < 1) {
-		printk("Connectix Quickcam yieldlines was less than 1. Using 1.\n");
+		printk(KERN_INFO "Connectix Quickcam yieldlines was less than 1. Using 1.\n");
 		yieldlines = 1;
 	}
 #endif