Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h

1 files changed, 119 insertions, 39 deletions

diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 16c6a921f40b..e45d2df08138 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -38,6 +38,7 @@
 #include "tda18271.h"
 #include "lgdt330x.h"
 #include "xc5000.h"
+#include "max2165.h"
 #include "tda10048.h"
 #include "tuner-xc2028.h"
 #include "tuner-simple.h"
@@ -54,6 +55,9 @@
 #include "netup-eeprom.h"
 #include "netup-init.h"
 #include "lgdt3305.h"
+#include "atbm8830.h"
+#include "ds3000.h"
+#include "cx23885-f300.h"
 
 static unsigned int debug;
 
@@ -400,6 +404,7 @@ static struct stv0900_reg stv0900_ts_regs[] = {
 
 static struct stv0900_config netup_stv0900_config = {
 	.demod_address = 0x68,
+	.demod_mode = 1, /* dual */
 	.xtal = 8000000,
 	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
 	.diseqc_mode = 2,/* 2/3 PWM */
@@ -414,34 +419,22 @@ static struct stv6110_config netup_stv6110_tunerconfig_a = {
 	.i2c_address = 0x60,
 	.mclk = 16000000,
 	.clk_div = 1,
+	.gain = 8, /* +16 dB  - maximum gain */
 };
 
 static struct stv6110_config netup_stv6110_tunerconfig_b = {
 	.i2c_address = 0x63,
 	.mclk = 16000000,
 	.clk_div = 1,
+	.gain = 8, /* +16 dB  - maximum gain */
 };
 
-static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
-	struct cx23885_tsport *port = fe->dvb->priv;
-	struct cx23885_dev *dev = port->dev;
-
-	if (voltage == SEC_VOLTAGE_18)
-		cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */
-	else if (voltage == SEC_VOLTAGE_13)
-		cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */
-	else
-		cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */
-	return 0;
-}
-
 static struct cx24116_config tbs_cx24116_config = {
-	.demod_address = 0x05,
+	.demod_address = 0x55,
 };
 
-static struct cx24116_config tevii_cx24116_config = {
-	.demod_address = 0x55,
+static struct ds3000_config tevii_ds3000_config = {
+	.demod_address = 0x68,
 };
 
 static struct cx24116_config dvbworld_cx24116_config = {
@@ -486,11 +479,40 @@ static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
 			break;
 		}
 		break;
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+		/* Select Digital TV */
+		cx23885_gpio_set(dev, GPIO_0);
+		break;
 	}
-	return (port->set_frontend_save) ?
-		port->set_frontend_save(fe, param) : -ENODEV;
+	return 0;
 }
 
+static int cx23885_dvb_fe_ioctl_override(struct dvb_frontend *fe,
+					 unsigned int cmd, void *parg,
+					 unsigned int stage)
+{
+	int err = 0;
+
+	switch (stage) {
+	case DVB_FE_IOCTL_PRE:
+
+		switch (cmd) {
+		case FE_SET_FRONTEND:
+			err = cx23885_dvb_set_frontend(fe,
+				(struct dvb_frontend_parameters *) parg);
+			break;
+		}
+		break;
+
+	case DVB_FE_IOCTL_POST:
+		/* no post-ioctl handling required */
+		break;
+	}
+	return err;
+};
+
+
 static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
 	.prod = LGS8GXX_PROD_LGS8G75,
 	.demod_address = 0x19,
@@ -511,6 +533,38 @@ static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
 	.if_khz = 6500,
 };
 
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 0,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 1,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
@@ -550,12 +604,6 @@ static int dvb_register(struct cx23885_tsport *port)
 				   0x60, &dev->i2c_bus[1].i2c_adap,
 				   &hauppauge_hvr127x_config);
 		}
-
-		/* FIXME: temporary hack */
-		/* define bridge override to set_frontend */
-		port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
-		fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
-
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 		i2c_bus = &dev->i2c_bus[0];
@@ -772,23 +820,23 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	case CX23885_BOARD_TBS_6920:
-		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus = &dev->i2c_bus[1];
 
 		fe0->dvb.frontend = dvb_attach(cx24116_attach,
-			&tbs_cx24116_config,
-			&i2c_bus->i2c_adap);
+					&tbs_cx24116_config,
+					&i2c_bus->i2c_adap);
 		if (fe0->dvb.frontend != NULL)
-			fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 
 		break;
 	case CX23885_BOARD_TEVII_S470:
 		i2c_bus = &dev->i2c_bus[1];
 
-		fe0->dvb.frontend = dvb_attach(cx24116_attach,
-			&tevii_cx24116_config,
-			&i2c_bus->i2c_adap);
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+					&tevii_ds3000_config,
+					&i2c_bus->i2c_adap);
 		if (fe0->dvb.frontend != NULL)
-			fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
 
 		break;
 	case CX23885_BOARD_DVBWORLD_2005:
@@ -814,8 +862,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL,
-							LNBH24_TTX, 0x09))
+							LNBH24_PCL | LNBH24_TTX,
+							LNBH24_TEN, 0x09))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");
 
@@ -835,8 +883,8 @@ static int dvb_register(struct cx23885_tsport *port)
 					if (!dvb_attach(lnbh24_attach,
 							fe0->dvb.frontend,
 							&i2c_bus->i2c_adap,
-							LNBH24_PCL,
-							LNBH24_TTX, 0x0a))
+							LNBH24_PCL | LNBH24_TTX,
+							LNBH24_TEN, 0x0a))
 						printk(KERN_ERR
 							"No LNBH24 found!\n");
 
@@ -872,6 +920,7 @@ static int dvb_register(struct cx23885_tsport *port)
 		}
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		i2c_bus = &dev->i2c_bus[0];
 		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
 			&hcw_s5h1411_config,
@@ -881,6 +930,36 @@ static int dvb_register(struct cx23885_tsport *port)
 				0x60, &dev->i2c_bus[0].i2c_adap,
 				&hauppauge_tda18271_config);
 		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		switch (port->nr) {
+		/* port B */
+		case 1:
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg1,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(max2165_attach,
+					fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&mygic_x8558pro_max2165_cfg1);
+			}
+			break;
+		/* port C */
+		case 2:
+			i2c_bus = &dev->i2c_bus[1];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg2,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(max2165_attach,
+					fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&mygic_x8558pro_max2165_cfg2);
+			}
+			break;
+		}
+		break;
 
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
@@ -897,14 +976,15 @@ static int dvb_register(struct cx23885_tsport *port)
 	fe0->dvb.frontend->callback = cx23885_tuner_callback;
 
 	/* Put the analog decoder in standby to keep it quiet */
-	call_all(dev, tuner, s_standby);
+	call_all(dev, core, s_power, 0);
 
 	if (fe0->dvb.frontend->ops.analog_ops.standby)
 		fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
 
 	/* register everything */
 	ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
-		&dev->pci->dev, adapter_nr, 0);
+					&dev->pci->dev, adapter_nr, 0,
+					cx23885_dvb_fe_ioctl_override);
 
 	/* init CI & MAC */
 	switch (dev->board) {