V4L/DVB (7615): em28xx: Provide the proper support for switching between analog/digital

Before this patch,  HVR900/HVR950 were incorreclty going back to analog. The
result is that only digital were working.

This patch provides the proper setup for analog/digital and tuner callback.
It also properly resets analog into a sane state at open().

Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org>
for helping to set the proper parameters to GPO/GPIO em2883 ports.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

5 files changed, 150 insertions, 75 deletions

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ed50b4e55264..13ffde281067 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -436,19 +436,25 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table);
 
 /* Board Hauppauge WinTV HVR 900 analog */
 struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
-	{  -1,		-1,     6},
-	{EM28XX_R08_GPIO,	0x2d,  10},
-	{EM28XX_R08_GPIO,	0x3d,   5},
-	{  -1,		-1,    -1},
+	{EM28XX_R08_GPIO,	0x2d,	~EM_GPIO_4,	10},
+	{0x05,			0xff,	0x10,		10},
+	{  -1,			-1,	-1,		-1},
 };
+
 /* Board Hauppauge WinTV HVR 900 digital */
 struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
-	{  -1,		-1,     6},
-	{EM28XX_R08_GPIO,	0x2e,   6},
-	{EM28XX_R08_GPIO,	0x3e,   6},
-	{EM2880_R04_GPO,	0x04,  10},
-	{EM2880_R04_GPO,	0x0c,  10},
-	{ -1,    -1,  -1},
+	{EM28XX_R08_GPIO,	0x2e,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x04,	0x0f,		10},
+	{EM2880_R04_GPO,	0x0c,	0x0f,		10},
+	{ -1,			-1,	-1,		-1},
+};
+
+/* Board Hauppauge WinTV HVR 900 tuner_callback */
+struct em28xx_reg_seq hauppauge_wintv_hvr_900_tuner_callback[] = {
+	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
+	{EM28XX_R08_GPIO,	0,		EM_GPIO_4,	10},
+	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
+	{  -1,			-1,		-1,		-1},
 };
 
 /*
@@ -469,7 +475,6 @@ int em28xx_tuner_callback(void *ptr, int command, int arg)
 {
 	int rc = 0;
 	struct em28xx *dev = ptr;
-	struct em28xx_reg_seq *gpio;
 
 	if (dev->tuner_type != TUNER_XC2028)
 		return 0;
@@ -478,32 +483,10 @@ int em28xx_tuner_callback(void *ptr, int command, int arg)
 		return 0;
 
 	if (dev->mode == EM28XX_ANALOG_MODE)
-		gpio = dev->analog_gpio;
+		rc = em28xx_gpio_set(dev, dev->tun_analog_gpio);
 	else
-		gpio = dev->digital_gpio;
+		rc = em28xx_gpio_set(dev, dev->tun_digital_gpio);
 
-	/* djh - Not sure if these are still required */
-	dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
-	if (dev->mode == EM28XX_ANALOG_MODE)
-		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
-	else
-		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
-	msleep(6);
-
-	if (!gpio)
-		return rc;
-
-	/* Send GPIO reset sequences specified at board entry */
-	while (gpio->sleep >= 0) {
-		if (gpio->reg >= 0)
-			rc = dev->em28xx_write_regs(dev,
-						    gpio->reg,
-						    &gpio->val, 1);
-		if (gpio->sleep > 0)
-			msleep(gpio->sleep);
-
-		gpio++;
-	}
 	return rc;
 }
 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
@@ -527,6 +510,10 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 {
 	int rc;
 
+	rc = em28xx_read_reg(dev, EM2880_R04_GPO);
+	if (rc >= 0)
+		dev->reg_gpo = rc;
+
 	dev->wait_after_write = 5;
 	rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
 	if (rc > 0) {
@@ -547,24 +534,24 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 	case EM2880_BOARD_TERRATEC_HYBRID_XS:
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
-		em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+		em28xx_write_regs(dev, EM28XX_R0F_XCLK,    "\x27", 1);
 		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
-		em28xx_write_regs(dev, 0x08, "\xff", 1);
-		em28xx_write_regs(dev, 0x04, "\x00", 1);
-		msleep(100);
-		em28xx_write_regs(dev, 0x04, "\x08", 1);
-		msleep(100);
-		em28xx_write_regs(dev, 0x08, "\xff", 1);
-		msleep(50);
-		em28xx_write_regs(dev, 0x08, "\x2d", 1);
 		msleep(50);
-		em28xx_write_regs(dev, 0x08, "\x3d", 1);
 
-		dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
-		dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
+		/* Sets GPO/GPIO sequences for this device */
+		dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
+		dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
+		dev->tun_analog_gpio  = hauppauge_wintv_hvr_900_tuner_callback;
+		dev->tun_digital_gpio = hauppauge_wintv_hvr_900_tuner_callback;
 
 		break;
 	}
+
+	em28xx_gpio_set(dev, dev->tun_analog_gpio);
+	em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+
+	/* Unlock device */
+	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
 }
 
 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index bd7794f4fd74..db40358c773b 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -134,7 +134,10 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	unsigned char *bufs;
 
 	if (dev->state & DEV_DISCONNECTED)
-		return(-ENODEV);
+		return -ENODEV;
+
+	if (len < 1)
+		return -EINVAL;
 
 	bufs = kmalloc(len, GFP_KERNEL);
 
@@ -162,7 +165,23 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 
 int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len)
 {
-	return em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
+	int rc;
+
+	rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
+
+	/* Stores GPO/GPIO values at the cache, if changed
+	   Only write values should be stored, since input on a GPIO
+	   register will return the input bits.
+	   Not sure what happens on reading GPO register.
+	 */
+	if (rc >= 0) {
+		if (reg == EM2880_R04_GPO)
+			dev->reg_gpo = buf[0];
+		else if (reg == EM28XX_R08_GPIO)
+			dev->reg_gpio = buf[0];
+	}
+
+	return rc;
 }
 
 /*
@@ -176,12 +195,19 @@ static int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
 	int oldval;
 	u8 newval;
 
-	oldval = em28xx_read_reg(dev, reg);
+	/* Uses cache for gpo/gpio registers */
+	if (reg == EM2880_R04_GPO)
+		oldval = dev->reg_gpo;
+	else if (reg == EM28XX_R08_GPIO)
+		oldval = dev->reg_gpio;
+	else
+		oldval = em28xx_read_reg(dev, reg);
 
 	if (oldval < 0)
 		return oldval;
 
 	newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
+
 	return em28xx_write_regs(dev, reg, &newval, 1);
 }
 
@@ -472,6 +498,57 @@ int em28xx_set_alternate(struct em28xx *dev)
 	return 0;
 }
 
+int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
+{
+	int rc = 0;
+
+	if (!gpio)
+		return rc;
+
+	dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+	if (dev->mode == EM28XX_ANALOG_MODE)
+		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
+	else
+		dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
+	msleep(6);
+
+	/* Send GPIO reset sequences specified at board entry */
+	while (gpio->sleep >= 0) {
+		if (gpio->reg >= 0) {
+			rc = em28xx_write_reg_bits(dev,
+						   gpio->reg,
+						   gpio->val,
+						   gpio->mask);
+			if (rc < 0)
+				return rc;
+		}
+		if (gpio->sleep > 0)
+			msleep(gpio->sleep);
+
+		gpio++;
+	}
+	return rc;
+}
+
+int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
+{
+	if (dev->mode == set_mode)
+		return 0;
+
+	if (set_mode == EM28XX_MODE_UNDEFINED) {
+		dev->mode = set_mode;
+		return 0;
+	}
+
+	dev->mode = set_mode;
+
+	if (dev->mode == EM28XX_DIGITAL_MODE)
+		return em28xx_gpio_set(dev, dev->digital_gpio);
+	else
+		return em28xx_gpio_set(dev, dev->analog_gpio);
+}
+EXPORT_SYMBOL_GPL(em28xx_set_mode);
+
 /* ------------------------------------------------------------------
 	URB control
    ------------------------------------------------------------------*/
@@ -548,8 +625,7 @@ EXPORT_SYMBOL_GPL(em28xx_uninit_isoc);
  */
 int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 		     int num_bufs, int max_pkt_size,
-		     int (*isoc_copy) (struct em28xx *dev, struct urb *urb),
-		     int cap_type)
+		     int (*isoc_copy) (struct em28xx *dev, struct urb *urb))
 {
 	struct em28xx_dmaqueue *dma_q = &dev->vidq;
 	int i;
@@ -612,7 +688,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 			should also be using 'desc.bInterval'
 		 */
 		pipe = usb_rcvisocpipe(dev->udev,
-			cap_type == EM28XX_ANALOG_CAPTURE ? 0x82 : 0x84);
+			dev->mode == EM28XX_ANALOG_MODE ? 0x82 : 0x84);
 
 		usb_fill_int_urb(urb, dev->udev, pipe,
 				 dev->isoc_ctl.transfer_buffer[i], sb_size,
@@ -632,7 +708,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 
 	init_waitqueue_head(&dma_q->wq);
 
-	em28xx_capture_start(dev, cap_type);
+	em28xx_capture_start(dev, 1);
 
 	/* submit urbs and enables IRQ */
 	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 39581d976e01..2e9ec626b609 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -137,14 +137,17 @@ static inline int dvb_isoc_copy(struct em28xx *dev, struct urb *urb)
 
 static int start_streaming(struct em28xx_dvb *dvb)
 {
+	int rc;
 	struct em28xx *dev = dvb->adapter.priv;
 
 	usb_set_interface(dev->udev, 0, 1);
-	dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+	rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
+	if (rc < 0)
+		return rc;
 
 	return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
 				EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE,
-				dvb_isoc_copy, EM28XX_DIGITAL_CAPTURE);
+				dvb_isoc_copy);
 }
 
 static int stop_streaming(struct em28xx_dvb *dvb)
@@ -152,6 +155,9 @@ static int stop_streaming(struct em28xx_dvb *dvb)
 	struct em28xx *dev = dvb->adapter.priv;
 
 	em28xx_uninit_isoc(dev);
+
+	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+
 	return 0;
 }
 
@@ -368,13 +374,10 @@ static int dvb_init(struct em28xx *dev)
 	}
 	dev->dvb = dvb;
 
+	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
 	switch (dev->model) {
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
-		/* Enable lgdt330x */
-		dev->mode = EM28XX_DIGITAL_MODE;
-		em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
-
 		dvb->frontend = dvb_attach(lgdt330x_attach,
 					   &em2880_lgdt3303_dev,
 					   &dev->i2c_adap);
@@ -384,9 +387,6 @@ static int dvb_init(struct em28xx *dev)
 		}
 		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
-		/* Enable zl10353 */
-		dev->mode = EM28XX_DIGITAL_MODE;
-		em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
 		dvb->frontend = dvb_attach(zl10353_attach,
 					   &em28xx_zl10353_with_xc3028,
 					   &dev->i2c_adap);
@@ -415,10 +415,12 @@ static int dvb_init(struct em28xx *dev)
 	if (result < 0)
 		goto out_free;
 
+	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
 	printk(KERN_INFO "Successfully loaded em28xx-dvb\n");
 	return 0;
 
 out_free:
+	em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
 	kfree(dvb);
 	dev->dvb = NULL;
 	return result;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index fb533fda2198..4ffd064c402a 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -461,7 +461,7 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 	if (urb_init) {
 		rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS,
 				      EM28XX_NUM_BUFS, dev->max_pkt_size,
-				      em28xx_isoc_copy, EM28XX_ANALOG_CAPTURE);
+				      em28xx_isoc_copy);
 		if (rc < 0)
 			goto fail;
 	}
@@ -1534,8 +1534,8 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 	em28xx_videodbg("open minor=%d type=%s users=%d\n",
 				minor, v4l2_type_names[fh_type], dev->users);
 
-	fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
 
+	fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
 	if (!fh) {
 		em28xx_errdev("em28xx-video.c: Out of memory?!\n");
 		return -ENOMEM;
@@ -1552,9 +1552,15 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 		dev->hscale = 0;
 		dev->vscale = 0;
 
+		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		em28xx_set_alternate(dev);
 		em28xx_resolution_set(dev);
 
+		/* Needed, since GPIO might have disabled power of
+		   some i2c device
+		 */
+		em28xx_config_i2c(dev);
+
 	}
 	if (fh->radio) {
 		em28xx_videodbg("video_open: setting radio device\n");
@@ -1568,6 +1574,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 			sizeof(struct em28xx_buffer), fh);
 
 	mutex_unlock(&dev->lock);
+
 	return errCode;
 }
 
@@ -1647,6 +1654,7 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp)
 
 		/* do this before setting alternate! */
 		em28xx_uninit_isoc(dev);
+		em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
 
 		/* set alternate 0 */
 		dev->alt = 0;
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index e4a56d8dfcf4..e0d119c22810 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -110,6 +110,7 @@
 #define EM2800_I2C_WRITE_TIMEOUT 20
 
 enum em28xx_mode {
+	EM28XX_MODE_UNDEFINED,
 	EM28XX_ANALOG_MODE,
 	EM28XX_DIGITAL_MODE,
 };
@@ -228,7 +229,7 @@ enum em28xx_decoder {
 
 struct em28xx_reg_seq {
 	int reg;
-	unsigned char val;
+	unsigned char val, mask;
 	int sleep;
 };
 
@@ -274,12 +275,6 @@ enum em28xx_dev_state {
 	DEV_MISCONFIGURED = 0x04,
 };
 
-enum em28xx_capture_mode {
-	EM28XX_CAPTURE_OFF = 0,
-	EM28XX_ANALOG_CAPTURE,
-	EM28XX_DIGITAL_CAPTURE,
-};
-
 #define EM28XX_AUDIO_BUFS 5
 #define EM28XX_NUM_AUDIO_PACKETS 64
 #define EM28XX_AUDIO_MAX_PACKET_SIZE 196 /* static value */
@@ -335,9 +330,12 @@ struct em28xx {
 	/* Some older em28xx chips needs a waiting time after writing */
 	unsigned int wait_after_write;
 
-	/* GPIO sequences for tuner callback */
+	/* GPIO sequences for analog and digital mode */
 	struct em28xx_reg_seq *analog_gpio, *digital_gpio;
 
+	/* GPIO sequences for tuner callbacks */
+	struct em28xx_reg_seq *tun_analog_gpio, *tun_digital_gpio;
+
 	int video_inputs;	/* number of video inputs */
 	struct list_head	devlist;
 
@@ -415,6 +413,9 @@ struct em28xx {
 
 	enum em28xx_mode mode;
 
+	/* Caches GPO and GPIO registers */
+	unsigned char	reg_gpo, reg_gpio;
+
 	struct em28xx_dvb *dvb;
 };
 
@@ -455,9 +456,10 @@ int em28xx_resolution_set(struct em28xx *dev);
 int em28xx_set_alternate(struct em28xx *dev);
 int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 		     int num_bufs, int max_pkt_size,
-		     int (*isoc_copy) (struct em28xx *dev, struct urb *urb),
-		     int cap_type);
+		     int (*isoc_copy) (struct em28xx *dev, struct urb *urb));
 void em28xx_uninit_isoc(struct em28xx *dev);
+int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode);
+int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio);
 
 /* Provided by em28xx-video.c */
 int em28xx_register_extension(struct em28xx_ops *dev);