diff options
author | Markus Lidel <Markus.Lidel@shadowconnect.com> | 2005-06-24 07:02:16 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-24 09:05:28 +0200 |
commit | f10378fff658f61307496e0ae00095041725cf07 (patch) | |
tree | 0c0413649317677771fa325dded94f1e12a6a0b7 /drivers/message/i2o | |
parent | [PATCH] I2O: first code cleanup of spare warnings and unused functions (diff) | |
download | linux-f10378fff658f61307496e0ae00095041725cf07.tar.xz linux-f10378fff658f61307496e0ae00095041725cf07.zip |
[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support
Changes:
- Added Bus-OSM which could be used by user space programs to reset a
channel on the controller
- Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
move those to its own file
- Added sysfs attribute for firmware read and write access for I2O
controllers
- Added special handling of firmware read and write access for Adaptec
controllers
- Added vendor id and product id as sysfs-attribute to Executive classes
- Added automatic notification of LCT change handling to Exec-OSM
- Added flushing function to Block-OSM for later barrier implementation
- Use PRIVATE messages for Block access on Adaptec controllers, which are
faster then BLOCK class access
- Cleaned up support for Promise controller
- New messages are now detected using the IRQ status register as
suggested by the I2O spec
- Added i2o_dma_high() and i2o_dma_low() functions
- Added facility for SG tablesize calculation when using 32-bit and
64-bit DMA addresses
- Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
SG list for 32-bit as well as 64-bit DMA addresses
Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/message/i2o')
-rw-r--r-- | drivers/message/i2o/Kconfig | 18 | ||||
-rw-r--r-- | drivers/message/i2o/Makefile | 3 | ||||
-rw-r--r-- | drivers/message/i2o/bus-osm.c | 164 | ||||
-rw-r--r-- | drivers/message/i2o/config-osm.c | 579 | ||||
-rw-r--r-- | drivers/message/i2o/driver.c | 12 | ||||
-rw-r--r-- | drivers/message/i2o/exec-osm.c | 74 | ||||
-rw-r--r-- | drivers/message/i2o/i2o_block.c | 277 | ||||
-rw-r--r-- | drivers/message/i2o/i2o_block.h | 4 | ||||
-rw-r--r-- | drivers/message/i2o/i2o_config.c | 156 | ||||
-rw-r--r-- | drivers/message/i2o/i2o_proc.c | 4 | ||||
-rw-r--r-- | drivers/message/i2o/i2o_scsi.c | 30 | ||||
-rw-r--r-- | drivers/message/i2o/iop.c | 263 | ||||
-rw-r--r-- | drivers/message/i2o/pci.c | 67 |
13 files changed, 1176 insertions, 475 deletions
diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig index 8d132b0d6b12..ce278e060aca 100644 --- a/drivers/message/i2o/Kconfig +++ b/drivers/message/i2o/Kconfig @@ -35,6 +35,24 @@ config I2O_CONFIG To compile this support as a module, choose M here: the module will be called i2o_config. +config I2O_CONFIG_OLD_IOCTL + bool "Enable ioctls (OBSOLETE)" + depends on I2O_CONFIG + default y + ---help--- + Enables old ioctls. + +config I2O_BUS + tristate "I2O Bus Adapter OSM" + depends on I2O + ---help--- + Include support for the I2O Bus Adapter OSM. The Bus Adapter OSM + provides access to the busses on the I2O controller. The main purpose + is to rescan the bus to find new devices. + + To compile this support as a module, choose M here: the + module will be called i2o_bus. + config I2O_BLOCK tristate "I2O Block OSM" depends on I2O diff --git a/drivers/message/i2o/Makefile b/drivers/message/i2o/Makefile index aabc6cdc3fce..2c2e39aa1efa 100644 --- a/drivers/message/i2o/Makefile +++ b/drivers/message/i2o/Makefile @@ -6,8 +6,11 @@ # i2o_core-y += iop.o driver.o device.o debug.o pci.o exec-osm.o +i2o_bus-y += bus-osm.o +i2o_config-y += config-osm.o obj-$(CONFIG_I2O) += i2o_core.o obj-$(CONFIG_I2O_CONFIG)+= i2o_config.o +obj-$(CONFIG_I2O_BUS) += i2o_bus.o obj-$(CONFIG_I2O_BLOCK) += i2o_block.o obj-$(CONFIG_I2O_SCSI) += i2o_scsi.o obj-$(CONFIG_I2O_PROC) += i2o_proc.o diff --git a/drivers/message/i2o/bus-osm.c b/drivers/message/i2o/bus-osm.c new file mode 100644 index 000000000000..d43c35894ae9 --- /dev/null +++ b/drivers/message/i2o/bus-osm.c @@ -0,0 +1,164 @@ +/* + * Bus Adapter OSM + * + * Copyright (C) 2005 Markus Lidel <Markus.Lidel@shadowconnect.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Fixes/additions: + * Markus Lidel <Markus.Lidel@shadowconnect.com> + * initial version. + */ + +#include <linux/module.h> +#include <linux/i2o.h> + +#define OSM_NAME "bus-osm" +#define OSM_VERSION "$Rev$" +#define OSM_DESCRIPTION "I2O Bus Adapter OSM" + +static struct i2o_driver i2o_bus_driver; + +/* Bus OSM class handling definition */ +static struct i2o_class_id i2o_bus_class_id[] = { + {I2O_CLASS_BUS_ADAPTER}, + {I2O_CLASS_END} +}; + +/** + * i2o_bus_scan - Scan the bus for new devices + * @dev: I2O device of the bus, which should be scanned + * + * Scans the bus dev for new / removed devices. After the scan a new LCT + * will be fetched automatically. + * + * Returns 0 on success or negative error code on failure. + */ +static int i2o_bus_scan(struct i2o_device *dev) +{ + struct i2o_message __iomem *msg; + u32 m; + + m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]); + writel(I2O_CMD_BUS_SCAN << 24 | HOST_TID << 12 | dev->lct_data.tid, + &msg->u.head[1]); + + return i2o_msg_post_wait(dev->iop, m, 60); +}; + +/** + * i2o_bus_store_scan - Scan the I2O Bus Adapter + * @d: device which should be scanned + * + * Returns count. + */ +static ssize_t i2o_bus_store_scan(struct device *d, const char *buf, + size_t count) +{ + struct i2o_device *i2o_dev = to_i2o_device(d); + int rc; + + if ((rc = i2o_bus_scan(i2o_dev))) + osm_warn("bus scan failed %d\n", rc); + + return count; +} + +/* Bus Adapter OSM device attributes */ +static DEVICE_ATTR(scan, S_IWUSR, NULL, i2o_bus_store_scan); + +/** + * i2o_bus_probe - verify if dev is a I2O Bus Adapter device and install it + * @dev: device to verify if it is a I2O Bus Adapter device + * + * Because we want all Bus Adapters always return 0. + * + * Returns 0. + */ +static int i2o_bus_probe(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(get_device(dev)); + + device_create_file(dev, &dev_attr_scan); + + osm_info("device added (TID: %03x)\n", i2o_dev->lct_data.tid); + + return 0; +}; + +/** + * i2o_bus_remove - remove the I2O Bus Adapter device from the system again + * @dev: I2O Bus Adapter device which should be removed + * + * Always returns 0. + */ +static int i2o_bus_remove(struct device *dev) +{ + struct i2o_device *i2o_dev = to_i2o_device(dev); + + device_remove_file(dev, &dev_attr_scan); + + put_device(dev); + + osm_info("device removed (TID: %03x)\n", i2o_dev->lct_data.tid); + + return 0; +}; + +/* Bus Adapter OSM driver struct */ +static struct i2o_driver i2o_bus_driver = { + .name = OSM_NAME, + .classes = i2o_bus_class_id, + .driver = { + .probe = i2o_bus_probe, + .remove = i2o_bus_remove, + }, +}; + +/** + * i2o_bus_init - Bus Adapter OSM initialization function + * + * Only register the Bus Adapter OSM in the I2O core. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_bus_init(void) +{ + int rc; + + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + /* Register Bus Adapter OSM into I2O core */ + rc = i2o_driver_register(&i2o_bus_driver); + if (rc) { + osm_err("Could not register Bus Adapter OSM\n"); + return rc; + } + + return 0; +}; + +/** + * i2o_bus_exit - Bus Adapter OSM exit function + * + * Unregisters Bus Adapter OSM from I2O core. + */ +static void __exit i2o_bus_exit(void) +{ + i2o_driver_unregister(&i2o_bus_driver); +}; + +MODULE_AUTHOR("Markus Lidel <Markus.Lidel@shadowconnect.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +module_init(i2o_bus_init); +module_exit(i2o_bus_exit); diff --git a/drivers/message/i2o/config-osm.c b/drivers/message/i2o/config-osm.c new file mode 100644 index 000000000000..d0267609a949 --- /dev/null +++ b/drivers/message/i2o/config-osm.c @@ -0,0 +1,579 @@ +/* + * Configuration OSM + * + * Copyright (C) 2005 Markus Lidel <Markus.Lidel@shadowconnect.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Fixes/additions: + * Markus Lidel <Markus.Lidel@shadowconnect.com> + * initial version. + */ + +#include <linux/module.h> +#include <linux/i2o.h> +#include <linux/namei.h> + +#include <asm/uaccess.h> + +#define OSM_NAME "config-osm" +#define OSM_VERSION "1.248" +#define OSM_DESCRIPTION "I2O Configuration OSM" + +/* access mode user rw */ +#define S_IWRSR (S_IRUSR | S_IWUSR) + +static struct i2o_driver i2o_config_driver; + +/* Special file operations for sysfs */ +struct fops_attribute { + struct bin_attribute bin; + struct file_operations fops; +}; + +/** + * sysfs_read_dummy + */ +static ssize_t sysfs_read_dummy(struct kobject *kobj, char *buf, loff_t offset, + size_t count) +{ + return 0; +}; + +/** + * sysfs_write_dummy + */ +static ssize_t sysfs_write_dummy(struct kobject *kobj, char *buf, loff_t offset, + size_t count) +{ + return 0; +}; + +/** + * sysfs_create_fops_file - Creates attribute with special file operations + * @kobj: kobject which should contains the attribute + * @attr: attributes which should be used to create file + * + * First creates attribute @attr in kobject @kobj. If it is the first time + * this function is called, merge old fops from sysfs with new one and + * write it back. Afterwords the new fops will be set for the created + * attribute. + * + * Returns 0 on success or negative error code on failure. + */ +static int sysfs_create_fops_file(struct kobject *kobj, + struct fops_attribute *attr) +{ + struct file_operations tmp, *fops; + struct dentry *d; + struct qstr qstr; + int rc; + + fops = &attr->fops; + + if (fops->read) + attr->bin.read = sysfs_read_dummy; + + if (fops->write) + attr->bin.write = sysfs_write_dummy; + + if ((rc = sysfs_create_bin_file(kobj, &attr->bin))) + return rc; + + qstr.name = attr->bin.attr.name; + qstr.len = strlen(qstr.name); + qstr.hash = full_name_hash(qstr.name, qstr.len); + + if ((d = lookup_hash(&qstr, kobj->dentry))) { + if (!fops->owner) { + memcpy(&tmp, d->d_inode->i_fop, sizeof(tmp)); + if (fops->read) + tmp.read = fops->read; + if (fops->write) + tmp.write = fops->write; + memcpy(fops, &tmp, sizeof(tmp)); + } + + d->d_inode->i_fop = fops; + } else + sysfs_remove_bin_file(kobj, &attr->bin); + + return -ENOENT; +}; + +/** + * sysfs_remove_fops_file - Remove attribute with special file operations + * @kobj: kobject which contains the attribute + * @attr: attributes which are used to create file + * + * Only wrapper arround sysfs_remove_bin_file() + * + * Returns 0 on success or negative error code on failure. + */ +static inline int sysfs_remove_fops_file(struct kobject *kobj, + struct fops_attribute *attr) +{ + return sysfs_remove_bin_file(kobj, &attr->bin); +}; + +/** + * i2o_config_read_hrt - Returns the HRT of the controller + * @kob: kernel object handle + * @buf: buffer into which the HRT should be copied + * @off: file offset + * @count: number of bytes to read + * + * Put @count bytes starting at @off into @buf from the HRT of the I2O + * controller corresponding to @kobj. + * + * Returns number of bytes copied into buffer. + */ +static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf, + loff_t offset, size_t count) +{ + struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; + i2o_hrt *hrt = c->hrt.virt; + + u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4; + + if (offset > size) + return 0; + + if (offset + count > size) + count = size - offset; + + memcpy(buf, (u8 *) hrt + offset, count); + + return count; +}; + +/** + * i2o_config_read_lct - Returns the LCT of the controller + * @kob: kernel object handle + * @buf: buffer into which the LCT should be copied + * @off: file offset + * @count: number of bytes to read + * + * Put @count bytes starting at @off into @buf from the LCT of the I2O + * controller corresponding to @kobj. + * + * Returns number of bytes copied into buffer. + */ +static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf, + loff_t offset, size_t count) +{ + struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; + u32 size = c->lct->table_size * 4; + + if (offset > size) + return 0; + + if (offset + count > size) + count = size - offset; + + memcpy(buf, (u8 *) c->lct + offset, count); + + return count; +}; + +#define I2O_CONFIG_SW_ATTR(_name,_mode,_type,_swid) \ +static ssize_t i2o_config_##_name##_read(struct file *file, char __user *buf, size_t count, loff_t * offset) { \ + return i2o_config_sw_read(file, buf, count, offset, _type, _swid); \ +};\ +\ +static ssize_t i2o_config_##_name##_write(struct file *file, const char __user *buf, size_t count, loff_t * offset) { \ + return i2o_config_sw_write(file, buf, count, offset, _type, _swid); \ +}; \ +\ +static struct fops_attribute i2o_config_attr_##_name = { \ + .bin = { .attr = { .name = __stringify(_name), .mode = _mode, \ + .owner = THIS_MODULE }, \ + .size = 0, }, \ + .fops = { .write = i2o_config_##_name##_write, \ + .read = i2o_config_##_name##_read} \ +}; + +#ifdef CONFIG_I2O_EXT_ADAPTEC + +/** + * i2o_config_dpt_reagion - Converts type and id to flash region + * @swtype: type of software module reading + * @swid: id of software which should be read + * + * Converts type and id from I2O spec to the matching region for DPT / + * Adaptec controllers. + * + * Returns region which match type and id or -1 on error. + */ +static u32 i2o_config_dpt_region(u8 swtype, u8 swid) +{ + switch (swtype) { + case I2O_SOFTWARE_MODULE_IRTOS: + /* + * content: operation firmware + * region size: + * 0xbc000 for 2554, 3754, 2564, 3757 + * 0x170000 for 2865 + * 0x17c000 for 3966 + */ + if (!swid) + return 0; + + break; + + case I2O_SOFTWARE_MODULE_IOP_PRIVATE: + /* + * content: BIOS and SMOR + * BIOS size: first 0x8000 bytes + * region size: + * 0x40000 for 2554, 3754, 2564, 3757 + * 0x80000 for 2865, 3966 + */ + if (!swid) + return 1; + + break; + + case I2O_SOFTWARE_MODULE_IOP_CONFIG: + switch (swid) { + case 0: + /* + * content: NVRAM defaults + * region size: 0x2000 bytes + */ + return 2; + case 1: + /* + * content: serial number + * region size: 0x2000 bytes + */ + return 3; + } + break; + } + + return -1; +}; + +#endif + +/** + * i2o_config_sw_read - Read a software module from controller + * @file: file pointer + * @buf: buffer into which the data should be copied + * @count: number of bytes to read + * @off: file offset + * @swtype: type of software module reading + * @swid: id of software which should be read + * + * Transfers @count bytes at offset @offset from IOP into buffer using + * type @swtype and id @swid as described in I2O spec. + * + * Returns number of bytes copied into buffer or error code on failure. + */ +static ssize_t i2o_config_sw_read(struct file *file, char __user * buf, + size_t count, loff_t * offset, u8 swtype, + u32 swid) +{ + struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata; + struct kobject *kobj = sd->s_element; + struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; + u32 m, function = I2O_CMD_SW_UPLOAD; + struct i2o_dma buffer; + struct i2o_message __iomem *msg; + u32 __iomem *mptr; + int rc, status; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -EBUSY; + + mptr = &msg->body[3]; + + if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) { + i2o_msg_nop(c, m); + return rc; + } +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) { + mptr = &msg->body[4]; + function = I2O_CMD_PRIVATE; + + writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]); + + writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_READ, + &msg->body[0]); + writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]); + writel(*offset, &msg->body[2]); + writel(count, &msg->body[3]); + } else +#endif + writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); + + writel(0xD0000000 | count, mptr++); + writel(buffer.phys, mptr); + + writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]); + writel(i2o_config_driver.context, &msg->u.head[2]); + writel(0, &msg->u.head[3]); + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (!c->adaptec) +#endif + { + writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]); + writel(0, &msg->body[1]); + writel(swid, &msg->body[2]); + } + + status = i2o_msg_post_wait_mem(c, m, 60, &buffer); + + if (status == I2O_POST_WAIT_OK) { + if (!(rc = copy_to_user(buf, buffer.virt, count))) { + rc = count; + *offset += count; + } + } else + rc = -EIO; + + if (status != -ETIMEDOUT) + i2o_dma_free(&c->pdev->dev, &buffer); + + return rc; +}; + +/** + * i2o_config_sw_write - Write a software module to controller + * @file: file pointer + * @buf: buffer into which the data should be copied + * @count: number of bytes to read + * @off: file offset + * @swtype: type of software module writing + * @swid: id of software which should be written + * + * Transfers @count bytes at offset @offset from buffer to IOP using + * type @swtype and id @swid as described in I2O spec. + * + * Returns number of bytes copied from buffer or error code on failure. + */ +static ssize_t i2o_config_sw_write(struct file *file, const char __user * buf, + size_t count, loff_t * offset, u8 swtype, + u32 swid) +{ + struct sysfs_dirent *sd = file->f_dentry->d_parent->d_fsdata; + struct kobject *kobj = sd->s_element; + struct i2o_controller *c = kobj_to_i2o_device(kobj)->iop; + u32 m, function = I2O_CMD_SW_DOWNLOAD; + struct i2o_dma buffer; + struct i2o_message __iomem *msg; + u32 __iomem *mptr; + int rc, status; + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -EBUSY; + + mptr = &msg->body[3]; + + if ((rc = i2o_dma_alloc(&c->pdev->dev, &buffer, count, GFP_KERNEL))) + goto nop_msg; + + if ((rc = copy_from_user(buffer.virt, buf, count))) + goto free_buffer; + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) { + mptr = &msg->body[4]; + function = I2O_CMD_PRIVATE; + + writel(TEN_WORD_MSG_SIZE | SGL_OFFSET_8, &msg->u.head[0]); + + writel(I2O_VENDOR_DPT << 16 | I2O_DPT_FLASH_WRITE, + &msg->body[0]); + writel(i2o_config_dpt_region(swtype, swid), &msg->body[1]); + writel(*offset, &msg->body[2]); + writel(count, &msg->body[3]); + } else +#endif + writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_7, &msg->u.head[0]); + + writel(0xD4000000 | count, mptr++); + writel(buffer.phys, mptr); + + writel(function << 24 | HOST_TID << 12 | ADAPTER_TID, &msg->u.head[1]); + writel(i2o_config_driver.context, &msg->u.head[2]); + writel(0, &msg->u.head[3]); + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (!c->adaptec) +#endif + { + writel((u32) swtype << 16 | (u32) 1 << 8, &msg->body[0]); + writel(0, &msg->body[1]); + writel(swid, &msg->body[2]); + } + + status = i2o_msg_post_wait_mem(c, m, 60, &buffer); + + if (status != -ETIMEDOUT) + i2o_dma_free(&c->pdev->dev, &buffer); + + if (status != I2O_POST_WAIT_OK) + return -EIO; + + *offset += count; + + return count; + + free_buffer: + i2o_dma_free(&c->pdev->dev, &buffer); + + nop_msg: + i2o_msg_nop(c, m); + + return rc; +}; + +/* attribute for HRT in sysfs */ +static struct bin_attribute i2o_config_hrt_attr = { + .attr = { + .name = "hrt", + .mode = S_IRUGO, + .owner = THIS_MODULE}, + .size = 0, + .read = i2o_config_read_hrt +}; + +/* attribute for LCT in sysfs */ +static struct bin_attribute i2o_config_lct_attr = { + .attr = { + .name = "lct", + .mode = S_IRUGO, + .owner = THIS_MODULE}, + .size = 0, + .read = i2o_config_read_lct +}; + +/* IRTOS firmware access */ +I2O_CONFIG_SW_ATTR(irtos, S_IWRSR, I2O_SOFTWARE_MODULE_IRTOS, 0); + +#ifdef CONFIG_I2O_EXT_ADAPTEC + +/* + * attribute for BIOS / SMOR, nvram and serial number access on DPT / Adaptec + * controllers + */ +I2O_CONFIG_SW_ATTR(bios, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_PRIVATE, 0); +I2O_CONFIG_SW_ATTR(nvram, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 0); +I2O_CONFIG_SW_ATTR(serial, S_IWRSR, I2O_SOFTWARE_MODULE_IOP_CONFIG, 1); + +#endif + +/** + * i2o_config_notify_controller_add - Notify of added controller + * @c: the controller which was added + * + * If a I2O controller is added, we catch the notification to add sysfs + * entries. + */ +static void i2o_config_notify_controller_add(struct i2o_controller *c) +{ + struct kobject *kobj = &c->exec->device.kobj; + + sysfs_create_bin_file(kobj, &i2o_config_hrt_attr); + sysfs_create_bin_file(kobj, &i2o_config_lct_attr); + + sysfs_create_fops_file(kobj, &i2o_config_attr_irtos); +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) { + sysfs_create_fops_file(kobj, &i2o_config_attr_bios); + sysfs_create_fops_file(kobj, &i2o_config_attr_nvram); + sysfs_create_fops_file(kobj, &i2o_config_attr_serial); + } +#endif +}; + +/** + * i2o_config_notify_controller_remove - Notify of removed controller + * @c: the controller which was removed + * + * If a I2O controller is removed, we catch the notification to remove the + * sysfs entries. + */ +static void i2o_config_notify_controller_remove(struct i2o_controller *c) +{ + struct kobject *kobj = &c->exec->device.kobj; + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) { + sysfs_remove_fops_file(kobj, &i2o_config_attr_serial); + sysfs_remove_fops_file(kobj, &i2o_config_attr_nvram); + sysfs_remove_fops_file(kobj, &i2o_config_attr_bios); + } +#endif + sysfs_remove_fops_file(kobj, &i2o_config_attr_irtos); + + sysfs_remove_bin_file(kobj, &i2o_config_lct_attr); + sysfs_remove_bin_file(kobj, &i2o_config_hrt_attr); +}; + +/* Config OSM driver struct */ +static struct i2o_driver i2o_config_driver = { + .name = OSM_NAME, + .notify_controller_add = i2o_config_notify_controller_add, + .notify_controller_remove = i2o_config_notify_controller_remove +}; + +#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL +#include "i2o_config.c" +#endif + +/** + * i2o_config_init - Configuration OSM initialization function + * + * Registers Configuration OSM in the I2O core and if old ioctl's are + * compiled in initialize them. + * + * Returns 0 on success or negative error code on failure. + */ +static int __init i2o_config_init(void) +{ + printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); + + if (i2o_driver_register(&i2o_config_driver)) { + osm_err("handler register failed.\n"); + return -EBUSY; + } +#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL + if (i2o_config_old_init()) + i2o_driver_unregister(&i2o_config_driver); +#endif + + return 0; +} + +/** + * i2o_config_exit - Configuration OSM exit function + * + * If old ioctl's are compiled in exit remove them and unregisters + * Configuration OSM from I2O core. + */ +static void i2o_config_exit(void) +{ +#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL + i2o_config_old_exit(); +#endif + + i2o_driver_unregister(&i2o_config_driver); +} + +MODULE_AUTHOR("Markus Lidel <Markus.Lidel@shadowconnect.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(OSM_DESCRIPTION); +MODULE_VERSION(OSM_VERSION); + +module_init(i2o_config_init); +module_exit(i2o_config_exit); diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c index bebdd509b5d8..393be8e2914c 100644 --- a/drivers/message/i2o/driver.c +++ b/drivers/message/i2o/driver.c @@ -180,7 +180,13 @@ int i2o_driver_dispatch(struct i2o_controller *c, u32 m) { struct i2o_driver *drv; struct i2o_message __iomem *msg = i2o_msg_out_to_virt(c, m); - u32 context = readl(&msg->u.s.icntxt); + u32 context; + unsigned long flags; + + if(unlikely(!msg)) + return -EIO; + + context = readl(&msg->u.s.icntxt); if (unlikely(context >= i2o_max_drivers)) { osm_warn("%s: Spurious reply to unknown driver %d\n", c->name, @@ -188,9 +194,9 @@ int i2o_driver_dispatch(struct i2o_controller *c, u32 m) return -EIO; } - spin_lock(&i2o_drivers_lock); + spin_lock_irqsave(&i2o_drivers_lock, flags); drv = i2o_drivers[context]; - spin_unlock(&i2o_drivers_lock); + spin_unlock_irqrestore(&i2o_drivers_lock, flags); if (unlikely(!drv)) { osm_warn("%s: Spurious reply to unknown driver %d\n", c->name, diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c index 5581344fbba6..0160221c802a 100644 --- a/drivers/message/i2o/exec-osm.c +++ b/drivers/message/i2o/exec-osm.c @@ -206,6 +206,7 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, u32 context) { struct i2o_exec_wait *wait, *tmp; + unsigned long flags; static spinlock_t lock = SPIN_LOCK_UNLOCKED; int rc = 1; @@ -216,11 +217,13 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, * already expired. Not much we can do about that except log it for * debug purposes, increase timeout, and recompile. */ - spin_lock(&lock); + spin_lock_irqsave(&lock, flags); list_for_each_entry_safe(wait, tmp, &i2o_exec_wait_list, list) { if (wait->tcntxt == context) { list_del(&wait->list); + spin_unlock_irqrestore(&lock, flags); + wait->m = m; wait->msg = msg; wait->complete = 1; @@ -242,13 +245,11 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, rc = -1; } - spin_unlock(&lock); - return rc; } } - spin_unlock(&lock); + spin_unlock_irqrestore(&lock, flags); osm_warn("%s: Bogus reply in POST WAIT (tr-context: %08x)!\n", c->name, context); @@ -257,6 +258,50 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, }; /** + * i2o_exec_show_vendor_id - Displays Vendor ID of controller + * @d: device of which the Vendor ID should be displayed + * @buf: buffer into which the Vendor ID should be printed + * + * Returns number of bytes printed into buffer. + */ +static ssize_t i2o_exec_show_vendor_id(struct device *d, char *buf) +{ + struct i2o_device *dev = to_i2o_device(d); + u16 id; + + if (i2o_parm_field_get(dev, 0x0000, 0, &id, 2)) { + sprintf(buf, "0x%04x", id); + return strlen(buf) + 1; + } + + return 0; +}; + +/** + * i2o_exec_show_product_id - Displays Product ID of controller + * @d: device of which the Product ID should be displayed + * @buf: buffer into which the Product ID should be printed + * + * Returns number of bytes printed into buffer. + */ +static ssize_t i2o_exec_show_product_id(struct device *d, char *buf) +{ + struct i2o_device *dev = to_i2o_device(d); + u16 id; + + if (i2o_parm_field_get(dev, 0x0000, 1, &id, 2)) { + sprintf(buf, "0x%04x", id); + return strlen(buf) + 1; + } + + return 0; +}; + +/* Exec-OSM device attributes */ +static DEVICE_ATTR(vendor_id, S_IRUGO, i2o_exec_show_vendor_id, NULL); +static DEVICE_ATTR(product_id, S_IRUGO, i2o_exec_show_product_id, NULL); + +/** * i2o_exec_probe - Called if a new I2O device (executive class) appears * @dev: I2O device which should be probed * @@ -268,10 +313,16 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, static int i2o_exec_probe(struct device *dev) { struct i2o_device *i2o_dev = to_i2o_device(dev); + struct i2o_controller *c = i2o_dev->iop; i2o_event_register(i2o_dev, &i2o_exec_driver, 0, 0xffffffff); - i2o_dev->iop->exec = i2o_dev; + c->exec = i2o_dev; + + i2o_exec_lct_notify(c, c->lct->change_ind + 1); + + device_create_file(dev, &dev_attr_vendor_id); + device_create_file(dev, &dev_attr_product_id); return 0; }; @@ -286,6 +337,9 @@ static int i2o_exec_probe(struct device *dev) */ static int i2o_exec_remove(struct device *dev) { + device_remove_file(dev, &dev_attr_product_id); + device_remove_file(dev, &dev_attr_vendor_id); + i2o_event_register(to_i2o_device(dev), &i2o_exec_driver, 0, 0); return 0; @@ -297,12 +351,16 @@ static int i2o_exec_remove(struct device *dev) * * This function handles asynchronus LCT NOTIFY replies. It parses the * new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY - * again. + * again, otherwise send LCT NOTIFY to get informed on next LCT change. */ static void i2o_exec_lct_modified(struct i2o_controller *c) { - if (i2o_device_parse_lct(c) == -EAGAIN) - i2o_exec_lct_notify(c, 0); + u32 change_ind = 0; + + if (i2o_device_parse_lct(c) != -EAGAIN) + change_ind = c->lct->change_ind + 1; + + i2o_exec_lct_notify(c, change_ind); }; /** diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index e69421e36ac5..1dd2b9dad50e 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -147,6 +147,29 @@ static int i2o_block_device_flush(struct i2o_device *dev) }; /** + * i2o_block_issue_flush - device-flush interface for block-layer + * @queue: the request queue of the device which should be flushed + * @disk: gendisk + * @error_sector: error offset + * + * Helper function to provide flush functionality to block-layer. + * + * Returns 0 on success or negative error code on failure. + */ + +static int i2o_block_issue_flush(request_queue_t * queue, struct gendisk *disk, + sector_t * error_sector) +{ + struct i2o_block_device *i2o_blk_dev = queue->queuedata; + int rc = -ENODEV; + + if (likely(i2o_blk_dev)) + rc = i2o_block_device_flush(i2o_blk_dev->i2o_dev); + + return rc; +} + +/** * i2o_block_device_mount - Mount (load) the media of device dev * @dev: I2O device which should receive the mount request * @media_id: Media Identifier @@ -299,28 +322,31 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq) /** * i2o_block_sglist_alloc - Allocate the SG list and map it + * @c: I2O controller to which the request belongs * @ireq: I2O block request * - * Builds the SG list and map it into to be accessable by the controller. + * Builds the SG list and map it to be accessable by the controller. * - * Returns the number of elements in the SG list or 0 on failure. + * Returns 0 on failure or 1 on success. */ -static inline int i2o_block_sglist_alloc(struct i2o_block_request *ireq) +static inline int i2o_block_sglist_alloc(struct i2o_controller *c, + struct i2o_block_request *ireq, + u32 __iomem ** mptr) { - struct device *dev = &ireq->i2o_blk_dev->i2o_dev->iop->pdev->dev; int nents; + enum dma_data_direction direction; + ireq->dev = &c->pdev->dev; nents = blk_rq_map_sg(ireq->req->q, ireq->req, ireq->sg_table); if (rq_data_dir(ireq->req) == READ) - ireq->sg_dma_direction = PCI_DMA_FROMDEVICE; + direction = PCI_DMA_FROMDEVICE; else - ireq->sg_dma_direction = PCI_DMA_TODEVICE; + direction = PCI_DMA_TODEVICE; - ireq->sg_nents = dma_map_sg(dev, ireq->sg_table, nents, - ireq->sg_dma_direction); + ireq->sg_nents = nents; - return ireq->sg_nents; + return i2o_dma_map_sg(c, ireq->sg_table, nents, direction, mptr); }; /** @@ -331,10 +357,14 @@ static inline int i2o_block_sglist_alloc(struct i2o_block_request *ireq) */ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) { - struct device *dev = &ireq->i2o_blk_dev->i2o_dev->iop->pdev->dev; + enum dma_data_direction direction; - dma_unmap_sg(dev, ireq->sg_table, ireq->sg_nents, - ireq->sg_dma_direction); + if (rq_data_dir(ireq->req) == READ) + direction = PCI_DMA_FROMDEVICE; + else + direction = PCI_DMA_TODEVICE; + + dma_unmap_sg(ireq->dev, ireq->sg_table, ireq->sg_nents, direction); }; /** @@ -352,6 +382,11 @@ static int i2o_block_prep_req_fn(struct request_queue *q, struct request *req) struct i2o_block_device *i2o_blk_dev = q->queuedata; struct i2o_block_request *ireq; + if (unlikely(!i2o_blk_dev)) { + osm_err("block device already removed\n"); + return BLKPREP_KILL; + } + /* request is already processed by us, so return */ if (req->flags & REQ_SPECIAL) { osm_debug("REQ_SPECIAL already set!\n"); @@ -414,11 +449,11 @@ static void i2o_block_end_request(struct request *req, int uptodate, { struct i2o_block_request *ireq = req->special; struct i2o_block_device *dev = ireq->i2o_blk_dev; - request_queue_t *q = dev->gd->queue; + request_queue_t *q = req->q; unsigned long flags; if (end_that_request_chunk(req, uptodate, nr_bytes)) { - int leftover = (req->hard_nr_sectors << 9); + int leftover = (req->hard_nr_sectors << KERNEL_SECTOR_SHIFT); if (blk_pc_request(req)) leftover = req->data_len; @@ -432,8 +467,11 @@ static void i2o_block_end_request(struct request *req, int uptodate, spin_lock_irqsave(q->queue_lock, flags); end_that_request_last(req); - dev->open_queue_depth--; - list_del(&ireq->queue); + + if (likely(dev)) { + dev->open_queue_depth--; + list_del(&ireq->queue); + } blk_start_queue(q); @@ -483,8 +521,8 @@ static int i2o_block_reply(struct i2o_controller *c, u32 m, * Don't stick a supertrak100 into cache aggressive modes */ - osm_err("%03x error status: %02x, detailed status: %04x\n", - (le32_to_cpu(msg->u.head[1]) >> 12 & 0xfff), + osm_err("TID %03x error status: 0x%02x, detailed status: " + "0x%04x\n", (le32_to_cpu(msg->u.head[1]) >> 12 & 0xfff), status >> 24, status & 0xffff); req->errors++; @@ -705,18 +743,25 @@ static int i2o_block_media_changed(struct gendisk *disk) static int i2o_block_transfer(struct request *req) { struct i2o_block_device *dev = req->rq_disk->private_data; - struct i2o_controller *c = dev->i2o_dev->iop; + struct i2o_controller *c; int tid = dev->i2o_dev->lct_data.tid; struct i2o_message __iomem *msg; - void __iomem *mptr; + u32 __iomem *mptr; struct i2o_block_request *ireq = req->special; - struct scatterlist *sg; - int sgnum; - int i; u32 m; u32 tcntxt; - u32 sg_flags; + u32 sgl_offset = SGL_OFFSET_8; + u32 ctl_flags = 0x00000000; int rc; + u32 cmd; + + if (unlikely(!dev->i2o_dev)) { + osm_err("transfer to removed drive\n"); + rc = -ENODEV; + goto exit; + } + + c = dev->i2o_dev->iop; m = i2o_msg_get(c, &msg); if (m == I2O_QUEUE_EMPTY) { @@ -730,80 +775,109 @@ static int i2o_block_transfer(struct request *req) goto nop_msg; } - if ((sgnum = i2o_block_sglist_alloc(ireq)) <= 0) { - rc = -ENOMEM; - goto context_remove; - } - - /* Build the message based on the request. */ writel(i2o_block_driver.context, &msg->u.s.icntxt); writel(tcntxt, &msg->u.s.tcntxt); - writel(req->nr_sectors << 9, &msg->body[1]); - writel((((u64) req->sector) << 9) & 0xffffffff, &msg->body[2]); - writel(req->sector >> 23, &msg->body[3]); - - mptr = &msg->body[4]; - - sg = ireq->sg_table; + mptr = &msg->body[0]; if (rq_data_dir(req) == READ) { - writel(I2O_CMD_BLOCK_READ << 24 | HOST_TID << 12 | tid, - &msg->u.head[1]); - sg_flags = 0x10000000; + cmd = I2O_CMD_BLOCK_READ << 24; + switch (dev->rcache) { - case CACHE_NULL: - writel(0, &msg->body[0]); - break; case CACHE_PREFETCH: - writel(0x201F0008, &msg->body[0]); + ctl_flags = 0x201F0008; break; + case CACHE_SMARTFETCH: if (req->nr_sectors > 16) - writel(0x201F0008, &msg->body[0]); + ctl_flags = 0x201F0008; else - writel(0x001F0000, &msg->body[0]); + ctl_flags = 0x001F0000; + break; + + default: break; } } else { - writel(I2O_CMD_BLOCK_WRITE << 24 | HOST_TID << 12 | tid, - &msg->u.head[1]); - sg_flags = 0x14000000; + cmd = I2O_CMD_BLOCK_WRITE << 24; + switch (dev->wcache) { - case CACHE_NULL: - writel(0, &msg->body[0]); - break; case CACHE_WRITETHROUGH: - writel(0x001F0008, &msg->body[0]); + ctl_flags = 0x001F0008; break; case CACHE_WRITEBACK: - writel(0x001F0010, &msg->body[0]); + ctl_flags = 0x001F0010; break; case CACHE_SMARTBACK: if (req->nr_sectors > 16) - writel(0x001F0004, &msg->body[0]); + ctl_flags = 0x001F0004; else - writel(0x001F0010, &msg->body[0]); + ctl_flags = 0x001F0010; break; case CACHE_SMARTTHROUGH: if (req->nr_sectors > 16) - writel(0x001F0004, &msg->body[0]); + ctl_flags = 0x001F0004; else - writel(0x001F0010, &msg->body[0]); + ctl_flags = 0x001F0010; + default: + break; + } + } + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) { + u8 cmd[10]; + u32 scsi_flags; + u16 hwsec = queue_hardsect_size(req->q) >> KERNEL_SECTOR_SHIFT; + + memset(cmd, 0, 10); + + sgl_offset = SGL_OFFSET_12; + + writel(I2O_CMD_PRIVATE << 24 | HOST_TID << 12 | tid, + &msg->u.head[1]); + + writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++); + writel(tid, mptr++); + + /* + * ENABLE_DISCONNECT + * SIMPLE_TAG + * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME + */ + if (rq_data_dir(req) == READ) { + cmd[0] = 0x28; + scsi_flags = 0x60a0000a; + } else { + cmd[0] = 0x2A; + scsi_flags = 0xa0a0000a; } + + writel(scsi_flags, mptr++); + + *((u32 *) & cmd[2]) = cpu_to_be32(req->sector * hwsec); + *((u16 *) & cmd[7]) = cpu_to_be16(req->nr_sectors * hwsec); + + memcpy_toio(mptr, cmd, 10); + mptr += 4; + writel(req->nr_sectors << KERNEL_SECTOR_SHIFT, mptr++); + } else +#endif + { + writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]); + writel(ctl_flags, mptr++); + writel(req->nr_sectors << KERNEL_SECTOR_SHIFT, mptr++); + writel((u32) (req->sector << KERNEL_SECTOR_SHIFT), mptr++); + writel(req->sector >> (32 - KERNEL_SECTOR_SHIFT), mptr++); } - for (i = sgnum; i > 0; i--) { - if (i == 1) - sg_flags |= 0x80000000; - writel(sg_flags | sg_dma_len(sg), mptr); - writel(sg_dma_address(sg), mptr + 4); - mptr += 8; - sg++; + if (!i2o_block_sglist_alloc(c, ireq, &mptr)) { + rc = -ENOMEM; + goto context_remove; } - writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | SGL_OFFSET_8, - &msg->u.head[0]); + writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | + sgl_offset, &msg->u.head[0]); list_add_tail(&ireq->queue, &dev->open_queue); dev->open_queue_depth++; @@ -846,11 +920,13 @@ static void i2o_block_request_fn(struct request_queue *q) queue_depth = ireq->i2o_blk_dev->open_queue_depth; - if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS) + if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS) { if (!i2o_block_transfer(req)) { blkdev_dequeue_request(req); continue; - } + } else + osm_info("transfer error\n"); + } if (queue_depth) break; @@ -933,6 +1009,7 @@ static struct i2o_block_device *i2o_block_device_alloc(void) } blk_queue_prep_rq(queue, i2o_block_prep_req_fn); + blk_queue_issue_flush_fn(queue, i2o_block_issue_flush); gd->major = I2O_MAJOR; gd->queue = queue; @@ -974,7 +1051,18 @@ static int i2o_block_probe(struct device *dev) u64 size; u32 blocksize; u32 flags, status; - int segments; + u16 body_size = 4; + unsigned short max_sectors; + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) + body_size = 8; +#endif + + if (c->limit_sectors) + max_sectors = I2O_MAX_SECTORS_LIMITED; + else + max_sectors = I2O_MAX_SECTORS; /* skip devices which are used by IOP */ if (i2o_dev->lct_data.user_tid != 0xfff) { @@ -1009,50 +1097,35 @@ static int i2o_block_probe(struct device *dev) queue = gd->queue; queue->queuedata = i2o_blk_dev; - blk_queue_max_phys_segments(queue, I2O_MAX_SEGMENTS); - blk_queue_max_sectors(queue, I2O_MAX_SECTORS); - - if (c->short_req) - segments = 8; - else { - i2o_status_block *sb; + blk_queue_max_phys_segments(queue, I2O_MAX_PHYS_SEGMENTS); + blk_queue_max_sectors(queue, max_sectors); + blk_queue_max_hw_segments(queue, i2o_sg_tablesize(c, body_size)); - sb = c->status_block.virt; - - segments = (sb->inbound_frame_size - - sizeof(struct i2o_message) / 4 - 4) / 2; - } - - blk_queue_max_hw_segments(queue, segments); - - osm_debug("max sectors = %d\n", I2O_MAX_SECTORS); - osm_debug("phys segments = %d\n", I2O_MAX_SEGMENTS); - osm_debug("hw segments = %d\n", segments); + osm_debug("max sectors = %d\n", queue->max_phys_segments); + osm_debug("phys segments = %d\n", queue->max_sectors); + osm_debug("max hw segments = %d\n", queue->max_hw_segments); /* * Ask for the current media data. If that isn't supported * then we ask for the device capacity data */ - if (!i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8)) - if (!i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8)) { - osm_warn("could not get size of %s\n", gd->disk_name); - size = 0; - } + if (i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) || + i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) { + blk_queue_hardsect_size(queue, blocksize); + } else + osm_warn("unable to get blocksize of %s\n", gd->disk_name); - if (!i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4)) - if (!i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) { - osm_warn("unable to get blocksize of %s\n", - gd->disk_name); - blocksize = 0; - } + if (i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8) || + i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8)) { + set_capacity(gd, size >> KERNEL_SECTOR_SHIFT); + } else + osm_warn("could not get size of %s\n", gd->disk_name); if (!i2o_parm_field_get(i2o_dev, 0x0000, 2, &i2o_blk_dev->power, 2)) i2o_blk_dev->power = 0; i2o_parm_field_get(i2o_dev, 0x0000, 5, &flags, 4); i2o_parm_field_get(i2o_dev, 0x0000, 6, &status, 4); - set_capacity(gd, size >> 9); - i2o_event_register(i2o_dev, &i2o_block_driver, 0, 0xffffffff); add_disk(gd); @@ -1109,7 +1182,7 @@ static int __init i2o_block_init(void) goto exit; } - i2o_blk_req_pool.pool = mempool_create(I2O_REQ_MEMPOOL_SIZE, + i2o_blk_req_pool.pool = mempool_create(I2O_BLOCK_REQ_MEMPOOL_SIZE, mempool_alloc_slab, mempool_free_slab, i2o_blk_req_pool.slab); diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h index 712111ffa638..9e1a95fb0833 100644 --- a/drivers/message/i2o/i2o_block.h +++ b/drivers/message/i2o/i2o_block.h @@ -84,9 +84,9 @@ struct i2o_block_request struct list_head queue; struct request *req; /* corresponding request */ struct i2o_block_device *i2o_blk_dev; /* I2O block device */ - int sg_dma_direction; /* direction of DMA buffer read/write */ + struct device *dev; /* device used for DMA */ int sg_nents; /* number of SG elements */ - struct scatterlist sg_table[I2O_MAX_SEGMENTS]; /* SG table */ + struct scatterlist sg_table[I2O_MAX_PHYS_SEGMENTS]; /* SG table */ }; /* I2O Block device delayed request */ diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index 383e89a5c9f0..849d90aad779 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -30,27 +30,11 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/i2o.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> #include <linux/miscdevice.h> -#include <linux/mm.h> -#include <linux/spinlock.h> #include <linux/smp_lock.h> -#include <linux/ioctl32.h> #include <linux/compat.h> -#include <linux/syscalls.h> #include <asm/uaccess.h> -#include <asm/io.h> - -#define OSM_NAME "config-osm" -#define OSM_VERSION "$Rev$" -#define OSM_DESCRIPTION "I2O Configuration OSM" extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int); @@ -80,125 +64,6 @@ struct i2o_cfg_info { static struct i2o_cfg_info *open_files = NULL; static ulong i2o_cfg_info_id = 0; -/** - * i2o_config_read_hrt - Returns the HRT of the controller - * @kob: kernel object handle - * @buf: buffer into which the HRT should be copied - * @off: file offset - * @count: number of bytes to read - * - * Put @count bytes starting at @off into @buf from the HRT of the I2O - * controller corresponding to @kobj. - * - * Returns number of bytes copied into buffer. - */ -static ssize_t i2o_config_read_hrt(struct kobject *kobj, char *buf, - loff_t offset, size_t count) -{ - struct i2o_controller *c = to_i2o_controller(container_of(kobj, - struct device, - kobj)); - i2o_hrt *hrt = c->hrt.virt; - - u32 size = (hrt->num_entries * hrt->entry_len + 2) * 4; - - if(offset > size) - return 0; - - if(offset + count > size) - count = size - offset; - - memcpy(buf, (u8 *) hrt + offset, count); - - return count; -}; - -/** - * i2o_config_read_lct - Returns the LCT of the controller - * @kob: kernel object handle - * @buf: buffer into which the LCT should be copied - * @off: file offset - * @count: number of bytes to read - * - * Put @count bytes starting at @off into @buf from the LCT of the I2O - * controller corresponding to @kobj. - * - * Returns number of bytes copied into buffer. - */ -static ssize_t i2o_config_read_lct(struct kobject *kobj, char *buf, - loff_t offset, size_t count) -{ - struct i2o_controller *c = to_i2o_controller(container_of(kobj, - struct device, - kobj)); - u32 size = c->lct->table_size * 4; - - if(offset > size) - return 0; - - if(offset + count > size) - count = size - offset; - - memcpy(buf, (u8 *) c->lct + offset, count); - - return count; -}; - -/* attribute for HRT in sysfs */ -static struct bin_attribute i2o_config_hrt_attr = { - .attr = { - .name = "hrt", - .mode = S_IRUGO, - .owner = THIS_MODULE - }, - .size = 0, - .read = i2o_config_read_hrt -}; - -/* attribute for LCT in sysfs */ -static struct bin_attribute i2o_config_lct_attr = { - .attr = { - .name = "lct", - .mode = S_IRUGO, - .owner = THIS_MODULE - }, - .size = 0, - .read = i2o_config_read_lct -}; - -/** - * i2o_config_notify_controller_add - Notify of added controller - * @c: the controller which was added - * - * If a I2O controller is added, we catch the notification to add sysfs - * entries. - */ -static void i2o_config_notify_controller_add(struct i2o_controller *c) -{ - sysfs_create_bin_file(&(c->device.kobj), &i2o_config_hrt_attr); - sysfs_create_bin_file(&(c->device.kobj), &i2o_config_lct_attr); -}; - -/** - * i2o_config_notify_controller_remove - Notify of removed controller - * @c: the controller which was removed - * - * If a I2O controller is removed, we catch the notification to remove the - * sysfs entries. - */ -static void i2o_config_notify_controller_remove(struct i2o_controller *c) -{ - sysfs_remove_bin_file(&c->device.kobj, &i2o_config_lct_attr); - sysfs_remove_bin_file(&c->device.kobj, &i2o_config_hrt_attr); -}; - -/* Config OSM driver struct */ -static struct i2o_driver i2o_config_driver = { - .name = OSM_NAME, - .notify_controller_add = i2o_config_notify_controller_add, - .notify_controller_remove = i2o_config_notify_controller_remove -}; - static int i2o_cfg_getiops(unsigned long arg) { struct i2o_controller *c; @@ -1257,37 +1122,20 @@ static struct miscdevice i2o_miscdev = { &config_fops }; -static int __init i2o_config_init(void) +static int __init i2o_config_old_init(void) { - printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - spin_lock_init(&i2o_config_lock); if (misc_register(&i2o_miscdev) < 0) { osm_err("can't register device.\n"); return -EBUSY; } - /* - * Install our handler - */ - if (i2o_driver_register(&i2o_config_driver)) { - osm_err("handler register failed.\n"); - misc_deregister(&i2o_miscdev); - return -EBUSY; - } return 0; } -static void i2o_config_exit(void) +static void i2o_config_old_exit(void) { misc_deregister(&i2o_miscdev); - i2o_driver_unregister(&i2o_config_driver); } MODULE_AUTHOR("Red Hat Software"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION(OSM_DESCRIPTION); -MODULE_VERSION(OSM_VERSION); - -module_init(i2o_config_init); -module_exit(i2o_config_exit); diff --git a/drivers/message/i2o/i2o_proc.c b/drivers/message/i2o/i2o_proc.c index b176d0eeff7f..e5b74452c495 100644 --- a/drivers/message/i2o/i2o_proc.c +++ b/drivers/message/i2o/i2o_proc.c @@ -228,7 +228,7 @@ static const char *i2o_get_class_name(int class) case I2O_CLASS_FLOPPY_DEVICE: idx = 12; break; - case I2O_CLASS_BUS_ADAPTER_PORT: + case I2O_CLASS_BUS_ADAPTER: idx = 13; break; case I2O_CLASS_PEER_TRANSPORT_AGENT: @@ -490,7 +490,7 @@ static int i2o_seq_show_lct(struct seq_file *seq, void *v) seq_printf(seq, ", Unknown Device Type"); break; - case I2O_CLASS_BUS_ADAPTER_PORT: + case I2O_CLASS_BUS_ADAPTER: if (lct->lct_entry[i].sub_class < BUS_TABLE_SIZE) seq_printf(seq, ", %s", bus_ports[lct->lct_entry[i]. diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index 812c29ec86d3..c3b0c29ac02d 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -103,7 +103,7 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) i2o_status_block *sb; list_for_each_entry(i2o_dev, &c->devices, list) - if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) { + if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) && (type == 0x01)) /* SCSI bus */ max_channel++; @@ -139,7 +139,7 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) i = 0; list_for_each_entry(i2o_dev, &c->devices, list) - if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER_PORT) { + if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1)) /* only SCSI bus */ i2o_shost->channel[i++] = i2o_dev; @@ -186,6 +186,7 @@ static int i2o_scsi_remove(struct device *dev) shost_for_each_device(scsi_dev, i2o_shost->scsi_host) if (scsi_dev->hostdata == i2o_dev) { + sysfs_remove_link(&i2o_dev->device.kobj, "scsi"); scsi_remove_device(scsi_dev); scsi_device_put(scsi_dev); break; @@ -259,12 +260,14 @@ static int i2o_scsi_probe(struct device *dev) scsi_dev = __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev); - if (!scsi_dev) { + if (IS_ERR(scsi_dev)) { osm_warn("can not add SCSI device %03x\n", i2o_dev->lct_data.tid); - return -EFAULT; + return PTR_ERR(scsi_dev); } + sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, "scsi"); + osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n", i2o_dev->lct_data.tid, channel, id, (unsigned int)lun); @@ -545,7 +548,13 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, int tid; struct i2o_message __iomem *msg; u32 m; - u32 scsi_flags, sg_flags; + /* + * ENABLE_DISCONNECT + * SIMPLE_TAG + * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME + */ + u32 scsi_flags = 0x20a00000; + u32 sg_flags; u32 __iomem *mptr; u32 __iomem *lenptr; u32 len; @@ -591,17 +600,19 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, switch (SCpnt->sc_data_direction) { case PCI_DMA_NONE: - scsi_flags = 0x00000000; // DATA NO XFER + /* DATA NO XFER */ sg_flags = 0x00000000; break; case PCI_DMA_TODEVICE: - scsi_flags = 0x80000000; // DATA OUT (iop-->dev) + /* DATA OUT (iop-->dev) */ + scsi_flags |= 0x80000000; sg_flags = 0x14000000; break; case PCI_DMA_FROMDEVICE: - scsi_flags = 0x40000000; // DATA IN (iop<--dev) + /* DATA IN (iop<--dev) */ + scsi_flags |= 0x40000000; sg_flags = 0x10000000; break; @@ -639,8 +650,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, } */ - /* Direction, disconnect ok, tag, CDBLen */ - writel(scsi_flags | 0x20200000 | SCpnt->cmd_len, mptr ++); + writel(scsi_flags | SCpnt->cmd_len, mptr++); /* Write SCSI command into the message - always 16 byte block */ memcpy_toio(mptr, SCpnt->cmnd, 16); diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 62b0d8bed186..40312053b38d 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -456,6 +456,70 @@ static int i2o_iop_clear(struct i2o_controller *c) } /** + * i2o_iop_init_outbound_queue - setup the outbound message queue + * @c: I2O controller + * + * Clear and (re)initialize IOP's outbound queue and post the message + * frames to the IOP. + * + * Returns 0 on success or a negative errno code on failure. + */ +static int i2o_iop_init_outbound_queue(struct i2o_controller *c) +{ + u8 *status = c->status.virt; + u32 m; + struct i2o_message __iomem *msg; + ulong timeout; + int i; + + osm_debug("%s: Initializing Outbound Queue...\n", c->name); + + memset(status, 0, 4); + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) + return -ETIMEDOUT; + + writel(EIGHT_WORD_MSG_SIZE | TRL_OFFSET_6, &msg->u.head[0]); + writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID, + &msg->u.head[1]); + writel(i2o_exec_driver.context, &msg->u.s.icntxt); + writel(0x0106, &msg->u.s.tcntxt); /* FIXME: why 0x0106, maybe in + Spec? */ + writel(PAGE_SIZE, &msg->body[0]); + /* Outbound msg frame size in words and Initcode */ + writel(MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]); + writel(0xd0000004, &msg->body[2]); + writel(i2o_dma_low(c->status.phys), &msg->body[3]); + writel(i2o_dma_high(c->status.phys), &msg->body[4]); + + i2o_msg_post(c, m); + + timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ; + while (*status <= I2O_CMD_IN_PROGRESS) { + if (time_after(jiffies, timeout)) { + osm_warn("%s: Timeout Initializing\n", c->name); + return -ETIMEDOUT; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + + rmb(); + } + + m = c->out_queue.phys; + + /* Post frames */ + for (i = 0; i < NMBR_MSG_FRAMES; i++) { + i2o_flush_reply(c, m); + udelay(1); /* Promise */ + m += MSG_FRAME_SIZE * 4; + } + + return 0; +} + +/** * i2o_iop_reset - reset an I2O controller * @c: controller to reset * @@ -491,25 +555,16 @@ static int i2o_iop_reset(struct i2o_controller *c) writel(0, &msg->u.s.tcntxt); //FIXME: use reasonable transaction context writel(0, &msg->body[0]); writel(0, &msg->body[1]); - writel(i2o_ptr_low((void *)c->status.phys), &msg->body[2]); - writel(i2o_ptr_high((void *)c->status.phys), &msg->body[3]); + writel(i2o_dma_low(c->status.phys), &msg->body[2]); + writel(i2o_dma_high(c->status.phys), &msg->body[3]); i2o_msg_post(c, m); /* Wait for a reply */ timeout = jiffies + I2O_TIMEOUT_RESET * HZ; while (!*status) { - if (time_after(jiffies, timeout)) { - printk(KERN_ERR "%s: IOP reset timeout.\n", c->name); - rc = -ETIMEDOUT; - goto exit; - } - - /* Promise bug */ - if (status[1] || status[4]) { - *status = 0; + if (time_after(jiffies, timeout)) break; - } set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(1); @@ -517,14 +572,20 @@ static int i2o_iop_reset(struct i2o_controller *c) rmb(); } - if (*status == I2O_CMD_IN_PROGRESS) { + switch (*status) { + case I2O_CMD_REJECTED: + osm_warn("%s: IOP reset rejected\n", c->name); + rc = -EPERM; + break; + + case I2O_CMD_IN_PROGRESS: /* * Once the reset is sent, the IOP goes into the INIT state - * which is indeterminate. We need to wait until the IOP - * has rebooted before we can let the system talk to - * it. We read the inbound Free_List until a message is - * available. If we can't read one in the given ammount of - * time, we assume the IOP could not reboot properly. + * which is indeterminate. We need to wait until the IOP has + * rebooted before we can let the system talk to it. We read + * the inbound Free_List until a message is available. If we + * can't read one in the given ammount of time, we assume the + * IOP could not reboot properly. */ pr_debug("%s: Reset in progress, waiting for reboot...\n", c->name); @@ -543,19 +604,26 @@ static int i2o_iop_reset(struct i2o_controller *c) m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET); } i2o_msg_nop(c, m); - } - /* from here all quiesce commands are safe */ - c->no_quiesce = 0; + /* from here all quiesce commands are safe */ + c->no_quiesce = 0; - /* If IopReset was rejected or didn't perform reset, try IopClear */ - i2o_status_get(c); - if (*status == I2O_CMD_REJECTED || sb->iop_state != ADAPTER_STATE_RESET) { - printk(KERN_WARNING "%s: Reset rejected, trying to clear\n", - c->name); - i2o_iop_clear(c); - } else - pr_debug("%s: Reset completed.\n", c->name); + /* verify if controller is in state RESET */ + i2o_status_get(c); + + if (!c->promise && (sb->iop_state != ADAPTER_STATE_RESET)) + osm_warn("%s: reset completed, but adapter not in RESET" + " state.\n", c->name); + else + osm_debug("%s: reset completed.\n", c->name); + + break; + + default: + osm_err("%s: IOP reset timeout.\n", c->name); + rc = -ETIMEDOUT; + break; + } exit: /* Enable all IOPs */ @@ -565,87 +633,6 @@ static int i2o_iop_reset(struct i2o_controller *c) }; /** - * i2o_iop_init_outbound_queue - setup the outbound message queue - * @c: I2O controller - * - * Clear and (re)initialize IOP's outbound queue and post the message - * frames to the IOP. - * - * Returns 0 on success or a negative errno code on failure. - */ -static int i2o_iop_init_outbound_queue(struct i2o_controller *c) -{ - u8 *status = c->status.virt; - u32 m; - struct i2o_message __iomem *msg; - ulong timeout; - int i; - - pr_debug("%s: Initializing Outbound Queue...\n", c->name); - - memset(status, 0, 4); - - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; - - writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]); - writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID, - &msg->u.head[1]); - writel(i2o_exec_driver.context, &msg->u.s.icntxt); - writel(0x00000000, &msg->u.s.tcntxt); - writel(PAGE_SIZE, &msg->body[0]); - writel(MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]); /* Outbound msg frame - size in words and Initcode */ - writel(0xd0000004, &msg->body[2]); - writel(i2o_ptr_low((void *)c->status.phys), &msg->body[3]); - writel(i2o_ptr_high((void *)c->status.phys), &msg->body[4]); - - i2o_msg_post(c, m); - - timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ; - while (*status <= I2O_CMD_IN_PROGRESS) { - if (time_after(jiffies, timeout)) { - printk(KERN_WARNING "%s: Timeout Initializing\n", - c->name); - return -ETIMEDOUT; - } - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); - - rmb(); - } - - m = c->out_queue.phys; - - /* Post frames */ - for (i = 0; i < NMBR_MSG_FRAMES; i++) { - i2o_flush_reply(c, m); - udelay(1); /* Promise */ - m += MSG_FRAME_SIZE * 4; - } - - return 0; -} - -/** - * i2o_iop_send_nop - send a core NOP message - * @c: controller - * - * Send a no-operation message with a reply set to cause no - * action either. Needed for bringing up promise controllers. - */ -static int i2o_iop_send_nop(struct i2o_controller *c) -{ - struct i2o_message __iomem *msg; - u32 m = i2o_msg_get_wait(c, &msg, HZ); - if (m == I2O_QUEUE_EMPTY) - return -ETIMEDOUT; - i2o_msg_nop(c, m); - return 0; -} - -/** * i2o_iop_activate - Bring controller up to HOLD * @c: controller * @@ -656,26 +643,9 @@ static int i2o_iop_send_nop(struct i2o_controller *c) */ static int i2o_iop_activate(struct i2o_controller *c) { - struct pci_dev *i960 = NULL; i2o_status_block *sb = c->status_block.virt; int rc; - - if (c->promise) { - /* Beat up the hardware first of all */ - i960 = - pci_find_slot(c->pdev->bus->number, - PCI_DEVFN(PCI_SLOT(c->pdev->devfn), 0)); - if (i960) - pci_write_config_word(i960, 0x42, 0); - - /* Follow this sequence precisely or the controller - ceases to perform useful functions until reboot */ - if ((rc = i2o_iop_send_nop(c))) - return rc; - - if ((rc = i2o_iop_reset(c))) - return rc; - } + int state; /* In INIT state, Wait Inbound Q to initialize (in i2o_status_get) */ /* In READY state, Get status */ @@ -684,7 +654,8 @@ static int i2o_iop_activate(struct i2o_controller *c) if (rc) { printk(KERN_INFO "%s: Unable to obtain status, " "attempting a reset.\n", c->name); - if (i2o_iop_reset(c)) + rc = i2o_iop_reset(c); + if (rc) return rc; } @@ -697,37 +668,37 @@ static int i2o_iop_activate(struct i2o_controller *c) switch (sb->iop_state) { case ADAPTER_STATE_FAULTED: printk(KERN_CRIT "%s: hardware fault\n", c->name); - return -ENODEV; + return -EFAULT; case ADAPTER_STATE_READY: case ADAPTER_STATE_OPERATIONAL: case ADAPTER_STATE_HOLD: case ADAPTER_STATE_FAILED: pr_debug("%s: already running, trying to reset...\n", c->name); - if (i2o_iop_reset(c)) - return -ENODEV; + rc = i2o_iop_reset(c); + if (rc) + return rc; } + /* preserve state */ + state = sb->iop_state; + rc = i2o_iop_init_outbound_queue(c); if (rc) return rc; - if (c->promise) { - if ((rc = i2o_iop_send_nop(c))) - return rc; + /* if adapter was not in RESET state clear now */ + if (state != ADAPTER_STATE_RESET) + i2o_iop_clear(c); - if ((rc = i2o_status_get(c))) - return rc; + i2o_status_get(c); - if (i960) - pci_write_config_word(i960, 0x42, 0x3FF); + if (sb->iop_state != ADAPTER_STATE_HOLD) { + osm_err("%s: failed to bring IOP into HOLD state\n", c->name); + return -EIO; } - /* In HOLD state */ - - rc = i2o_hrt_get(c); - - return rc; + return i2o_hrt_get(c); }; /** @@ -1030,8 +1001,8 @@ int i2o_status_get(struct i2o_controller *c) writel(0, &msg->u.s.tcntxt); // FIXME: use resonable transaction context writel(0, &msg->body[0]); writel(0, &msg->body[1]); - writel(i2o_ptr_low((void *)c->status_block.phys), &msg->body[2]); - writel(i2o_ptr_high((void *)c->status_block.phys), &msg->body[3]); + writel(i2o_dma_low(c->status_block.phys), &msg->body[2]); + writel(i2o_dma_high(c->status_block.phys), &msg->body[3]); writel(sizeof(i2o_status_block), &msg->body[4]); /* always 88 bytes */ i2o_msg_post(c, m); diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c index f33fd81f77a4..a499af096a68 100644 --- a/drivers/message/i2o/pci.c +++ b/drivers/message/i2o/pci.c @@ -50,30 +50,6 @@ static struct pci_device_id __devinitdata i2o_pci_ids[] = { }; /** - * i2o_dma_realloc - Realloc DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: pointer to a i2o_dma struct DMA buffer - * @len: new length of memory - * @gfp_mask: GFP mask - * - * If there was something allocated in the addr, free it first. If len > 0 - * than try to allocate it and write the addresses back to the addr - * structure. If len == 0 set the virtual address to NULL. - * - * Returns the 0 on success or negative error code on failure. - */ -int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, size_t len, - unsigned int gfp_mask) -{ - i2o_dma_free(dev, addr); - - if (len) - return i2o_dma_alloc(dev, addr, len, gfp_mask); - - return 0; -}; - -/** * i2o_pci_free - Frees the DMA memory for the I2O controller * @c: I2O controller to free * @@ -185,6 +161,7 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c) } else c->in_queue = c->base; + c->irq_status = c->base.virt + I2O_IRQ_STATUS; c->irq_mask = c->base.virt + I2O_IRQ_MASK; c->in_port = c->base.virt + I2O_IN_PORT; c->out_port = c->base.virt + I2O_OUT_PORT; @@ -232,36 +209,30 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c) static irqreturn_t i2o_pci_interrupt(int irq, void *dev_id, struct pt_regs *r) { struct i2o_controller *c = dev_id; - struct device *dev = &c->pdev->dev; - u32 mv = readl(c->out_port); - - /* - * Old 960 steppings had a bug in the I2O unit that caused - * the queue to appear empty when it wasn't. - */ - if (mv == I2O_QUEUE_EMPTY) { - mv = readl(c->out_port); - if (unlikely(mv == I2O_QUEUE_EMPTY)) - return IRQ_NONE; - else - pr_debug("%s: 960 bug detected\n", c->name); - } + u32 m; + irqreturn_t rc = IRQ_NONE; + + while (readl(c->irq_status) & I2O_IRQ_OUTBOUND_POST) { + m = readl(c->out_port); + if (m == I2O_QUEUE_EMPTY) { + /* + * Old 960 steppings had a bug in the I2O unit that + * caused the queue to appear empty when it wasn't. + */ + m = readl(c->out_port); + if (unlikely(m == I2O_QUEUE_EMPTY)) + break; + } - while (mv != I2O_QUEUE_EMPTY) { /* dispatch it */ - if (i2o_driver_dispatch(c, mv)) + if (i2o_driver_dispatch(c, m)) /* flush it if result != 0 */ - i2o_flush_reply(c, mv); + i2o_flush_reply(c, m); - /* - * That 960 bug again... - */ - mv = readl(c->out_port); - if (mv == I2O_QUEUE_EMPTY) - mv = readl(c->out_port); + rc = IRQ_HANDLED; } - return IRQ_HANDLED; + return rc; } /** |