Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 201 insertions, 0 deletions

diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
new file mode 100644
index 000000000000..123044608b63
--- /dev/null
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -0,0 +1,201 @@
+/*
+ * ChromeOS EC multi-function device (I2C)
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+static inline struct cros_ec_device *to_ec_dev(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_get_clientdata(client);
+}
+
+static int cros_ec_command_xfer(struct cros_ec_device *ec_dev,
+				struct cros_ec_msg *msg)
+{
+	struct i2c_client *client = ec_dev->priv;
+	int ret = -ENOMEM;
+	int i;
+	int packet_len;
+	u8 *out_buf = NULL;
+	u8 *in_buf = NULL;
+	u8 sum;
+	struct i2c_msg i2c_msg[2];
+
+	i2c_msg[0].addr = client->addr;
+	i2c_msg[0].flags = 0;
+	i2c_msg[1].addr = client->addr;
+	i2c_msg[1].flags = I2C_M_RD;
+
+	/*
+	 * allocate larger packet (one byte for checksum, one byte for
+	 * length, and one for result code)
+	 */
+	packet_len = msg->in_len + 3;
+	in_buf = kzalloc(packet_len, GFP_KERNEL);
+	if (!in_buf)
+		goto done;
+	i2c_msg[1].len = packet_len;
+	i2c_msg[1].buf = (char *)in_buf;
+
+	/*
+	 * allocate larger packet (one byte for checksum, one for
+	 * command code, one for length, and one for command version)
+	 */
+	packet_len = msg->out_len + 4;
+	out_buf = kzalloc(packet_len, GFP_KERNEL);
+	if (!out_buf)
+		goto done;
+	i2c_msg[0].len = packet_len;
+	i2c_msg[0].buf = (char *)out_buf;
+
+	out_buf[0] = EC_CMD_VERSION0 + msg->version;
+	out_buf[1] = msg->cmd;
+	out_buf[2] = msg->out_len;
+
+	/* copy message payload and compute checksum */
+	sum = out_buf[0] + out_buf[1] + out_buf[2];
+	for (i = 0; i < msg->out_len; i++) {
+		out_buf[3 + i] = msg->out_buf[i];
+		sum += out_buf[3 + i];
+	}
+	out_buf[3 + msg->out_len] = sum;
+
+	/* send command to EC and read answer */
+	ret = i2c_transfer(client->adapter, i2c_msg, 2);
+	if (ret < 0) {
+		dev_err(ec_dev->dev, "i2c transfer failed: %d\n", ret);
+		goto done;
+	} else if (ret != 2) {
+		dev_err(ec_dev->dev, "failed to get response: %d\n", ret);
+		ret = -EIO;
+		goto done;
+	}
+
+	/* check response error code */
+	if (i2c_msg[1].buf[0]) {
+		dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
+			 msg->cmd, i2c_msg[1].buf[0]);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	/* copy response packet payload and compute checksum */
+	sum = in_buf[0] + in_buf[1];
+	for (i = 0; i < msg->in_len; i++) {
+		msg->in_buf[i] = in_buf[2 + i];
+		sum += in_buf[2 + i];
+	}
+	dev_dbg(ec_dev->dev, "packet: %*ph, sum = %02x\n",
+		i2c_msg[1].len, in_buf, sum);
+	if (sum != in_buf[2 + msg->in_len]) {
+		dev_err(ec_dev->dev, "bad packet checksum\n");
+		ret = -EBADMSG;
+		goto done;
+	}
+
+	ret = 0;
+ done:
+	kfree(in_buf);
+	kfree(out_buf);
+	return ret;
+}
+
+static int cros_ec_probe_i2c(struct i2c_client *client,
+			     const struct i2c_device_id *dev_id)
+{
+	struct device *dev = &client->dev;
+	struct cros_ec_device *ec_dev = NULL;
+	int err;
+
+ 	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+	if (!ec_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, ec_dev);
+	ec_dev->name = "I2C";
+	ec_dev->dev = dev;
+	ec_dev->priv = client;
+	ec_dev->irq = client->irq;
+	ec_dev->command_xfer = cros_ec_command_xfer;
+	ec_dev->ec_name = client->name;
+	ec_dev->phys_name = client->adapter->name;
+	ec_dev->parent = &client->dev;
+
+	err = cros_ec_register(ec_dev);
+	if (err) {
+		dev_err(dev, "cannot register EC\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int cros_ec_remove_i2c(struct i2c_client *client)
+{
+	struct cros_ec_device *ec_dev = i2c_get_clientdata(client);
+
+	cros_ec_remove(ec_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_i2c_suspend(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = to_ec_dev(dev);
+
+	return cros_ec_suspend(ec_dev);
+}
+
+static int cros_ec_i2c_resume(struct device *dev)
+{
+	struct cros_ec_device *ec_dev = to_ec_dev(dev);
+
+	return cros_ec_resume(ec_dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_i2c_pm_ops, cros_ec_i2c_suspend,
+			  cros_ec_i2c_resume);
+
+static const struct i2c_device_id cros_ec_i2c_id[] = {
+	{ "cros-ec-i2c", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cros_ec_i2c_id);
+
+static struct i2c_driver cros_ec_driver = {
+	.driver	= {
+		.name	= "cros-ec-i2c",
+		.owner	= THIS_MODULE,
+		.pm	= &cros_ec_i2c_pm_ops,
+	},
+	.probe		= cros_ec_probe_i2c,
+	.remove		= cros_ec_remove_i2c,
+	.id_table	= cros_ec_i2c_id,
+};
+
+module_i2c_driver(cros_ec_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC multi function device");