mfd: rtsx: Read vendor setting from config space

Normally OEMs will set vendor setting to the config space of Realtek
card reader in BIOS stage. This patch reads the setting at the first,
and configure the internal registers according to it, to improve card
reader's compatibility condition.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 35 insertions, 3 deletions

diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index 58af4dbe3586..7a1ad6dd2917 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -34,6 +34,28 @@ static u8 rts5229_get_ic_version(struct rtsx_pcr *pcr)
 	return val & 0x0F;
 }
 
+static void rts5229_fetch_vendor_settings(struct rtsx_pcr *pcr)
+{
+	u32 reg;
+
+	rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+	dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+
+	if (!rtsx_vendor_setting_valid(reg))
+		return;
+
+	pcr->aspm_en = rtsx_reg_to_aspm(reg);
+	pcr->sd30_drive_sel_1v8 =
+		map_sd_drive(rtsx_reg_to_sd30_drive_sel_1v8(reg));
+	pcr->card_drive_sel &= 0x3F;
+	pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
+
+	rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+	dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+	pcr->sd30_drive_sel_3v3 =
+		map_sd_drive(rtsx_reg_to_sd30_drive_sel_3v3(reg));
+}
+
 static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
 {
 	rtsx_pci_init_cmd(pcr);
@@ -45,6 +67,9 @@ static int rts5229_extra_init_hw(struct rtsx_pcr *pcr)
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
 	/* LED shine disabled, set initial shine cycle period */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
+	/* Configure driving */
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DRIVE_SEL,
+			0xFF, pcr->sd30_drive_sel_3v3);
 
 	return rtsx_pci_send_cmd(pcr, 100);
 }
@@ -110,7 +135,7 @@ static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card)
 			SD_POWER_MASK | PMOS_STRG_MASK,
 			SD_POWER_OFF | PMOS_STRG_400mA);
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
-			LDO3318_PWR_MASK, 0X00);
+			LDO3318_PWR_MASK, 0x00);
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
@@ -120,7 +145,7 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 
 	if (voltage == OUTPUT_3V3) {
 		err = rtsx_pci_write_register(pcr,
-				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D);
+				SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_3v3);
 		if (err < 0)
 			return err;
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
@@ -128,7 +153,7 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 			return err;
 	} else if (voltage == OUTPUT_1V8) {
 		err = rtsx_pci_write_register(pcr,
-				SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
+				SD30_DRIVE_SEL, 0x07, pcr->sd30_drive_sel_1v8);
 		if (err < 0)
 			return err;
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
@@ -142,6 +167,7 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 }
 
 static const struct pcr_ops rts5229_pcr_ops = {
+	.fetch_vendor_settings = rts5229_fetch_vendor_settings,
 	.extra_init_hw = rts5229_extra_init_hw,
 	.optimize_phy = rts5229_optimize_phy,
 	.turn_on_led = rts5229_turn_on_led,
@@ -221,6 +247,12 @@ void rts5229_init_params(struct rtsx_pcr *pcr)
 	pcr->num_slots = 2;
 	pcr->ops = &rts5229_pcr_ops;
 
+	pcr->flags = 0;
+	pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
+	pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
+	pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
+	pcr->aspm_en = ASPM_L1_EN;
+
 	pcr->ic_version = rts5229_get_ic_version(pcr);
 	if (pcr->ic_version == IC_VER_C) {
 		pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl2;