mfd: Separate out STMPE controller and interface specific code

Few STMPE controller can have register interface over SPI or I2C. Current
implementation only supports I2C and all code is present in a single file
stmpe.c. It would be better to separate out I2C interface specific code from
controller specific code. Later SPI specific code can be added in a separate
file.

This patch separates out I2C and controller specific code into separate files,
making stmpe.c independent of I2C.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 107 insertions, 0 deletions

diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
new file mode 100644
index 000000000000..0a4365902e36
--- /dev/null
+++ b/drivers/mfd/stmpe-i2c.c
@@ -0,0 +1,107 @@
+/*
+ * ST Microelectronics MFD: stmpe's i2c client specific driver
+ *
+ * Copyright (C) ST-Ericsson SA 2010
+ * Copyright (C) ST Microelectronics SA 2011
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include "stmpe.h"
+
+static int i2c_reg_read(struct stmpe *stmpe, u8 reg)
+{
+	struct i2c_client *i2c = stmpe->client;
+
+	return i2c_smbus_read_byte_data(i2c, reg);
+}
+
+static int i2c_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
+{
+	struct i2c_client *i2c = stmpe->client;
+
+	return i2c_smbus_write_byte_data(i2c, reg, val);
+}
+
+static int i2c_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
+{
+	struct i2c_client *i2c = stmpe->client;
+
+	return i2c_smbus_read_i2c_block_data(i2c, reg, length, values);
+}
+
+static int i2c_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+		const u8 *values)
+{
+	struct i2c_client *i2c = stmpe->client;
+
+	return i2c_smbus_write_i2c_block_data(i2c, reg, length, values);
+}
+
+static struct stmpe_client_info i2c_ci = {
+	.read_byte = i2c_reg_read,
+	.write_byte = i2c_reg_write,
+	.read_block = i2c_block_read,
+	.write_block = i2c_block_write,
+};
+
+static int __devinit
+stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	i2c_ci.data = (void *)id;
+	i2c_ci.irq = i2c->irq;
+	i2c_ci.client = i2c;
+	i2c_ci.dev = &i2c->dev;
+
+	return stmpe_probe(&i2c_ci, id->driver_data);
+}
+
+static int __devexit stmpe_i2c_remove(struct i2c_client *i2c)
+{
+	struct stmpe *stmpe = dev_get_drvdata(&i2c->dev);
+
+	return stmpe_remove(stmpe);
+}
+
+static const struct i2c_device_id stmpe_i2c_id[] = {
+	{ "stmpe811", STMPE811 },
+	{ "stmpe1601", STMPE1601 },
+	{ "stmpe2401", STMPE2401 },
+	{ "stmpe2403", STMPE2403 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, stmpe_id);
+
+static struct i2c_driver stmpe_i2c_driver = {
+	.driver.name	= "stmpe-i2c",
+	.driver.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+	.driver.pm	= &stmpe_dev_pm_ops,
+#endif
+	.probe		= stmpe_i2c_probe,
+	.remove		= __devexit_p(stmpe_i2c_remove),
+	.id_table	= stmpe_i2c_id,
+};
+
+static int __init stmpe_init(void)
+{
+	return i2c_add_driver(&stmpe_i2c_driver);
+}
+subsys_initcall(stmpe_init);
+
+static void __exit stmpe_exit(void)
+{
+	i2c_del_driver(&stmpe_i2c_driver);
+}
+module_exit(stmpe_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPE MFD I2C Interface Driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");