Merge branch 'iov_iter' into for-next

5 files changed, 71 insertions, 4 deletions

diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index cf008f45968c..711773e8e64b 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -240,7 +240,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 		goto err_irq_charger;
 	}
 
-	ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+	ret = regmap_add_irq_chip(max77693->regmap_muic, max77693->irq,
 				IRQF_ONESHOT | IRQF_SHARED |
 				IRQF_TRIGGER_FALLING, 0,
 				&max77693_muic_irq_chip,
@@ -250,6 +250,17 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 		goto err_irq_muic;
 	}
 
+	/* Unmask interrupts from all blocks in interrupt source register */
+	ret = regmap_update_bits(max77693->regmap,
+				MAX77693_PMIC_REG_INTSRC_MASK,
+				SRC_IRQ_ALL, (unsigned int)~SRC_IRQ_ALL);
+	if (ret < 0) {
+		dev_err(max77693->dev,
+			"Could not unmask interrupts in INTSRC: %d\n",
+			ret);
+		goto err_intsrc;
+	}
+
 	pm_runtime_set_active(max77693->dev);
 
 	ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
@@ -261,6 +272,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 
 err_mfd:
 	mfd_remove_devices(max77693->dev);
+err_intsrc:
 	regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
 err_irq_muic:
 	regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index f2643c221d34..30f7ca89a0e6 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -947,6 +947,7 @@ static void rtsx_pci_idle_work(struct work_struct *work)
 	mutex_unlock(&pcr->pcr_mutex);
 }
 
+#ifdef CONFIG_PM
 static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
 {
 	if (pcr->ops->turn_off_led)
@@ -961,6 +962,7 @@ static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
 	if (pcr->ops->force_power_down)
 		pcr->ops->force_power_down(pcr, pm_state);
 }
+#endif
 
 static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
 {
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 2d045f26f193..bee0abf82040 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -269,7 +269,7 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE24XX_REG_CHIP_ID		0x80
 #define STMPE24XX_REG_IEGPIOR_LSB	0x18
 #define STMPE24XX_REG_ISGPIOR_MSB	0x19
-#define STMPE24XX_REG_GPMR_LSB		0xA5
+#define STMPE24XX_REG_GPMR_LSB		0xA4
 #define STMPE24XX_REG_GPSR_LSB		0x85
 #define STMPE24XX_REG_GPCR_LSB		0x88
 #define STMPE24XX_REG_GPDR_LSB		0x8B
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index cf92a6d1c532..50f9091bcd38 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -44,6 +44,15 @@ static u8 twl4030_start_script_address = 0x2b;
 #define PWR_DEVSLP		BIT(1)
 #define PWR_DEVOFF		BIT(0)
 
+/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */
+#define STARTON_SWBUG		BIT(7)	/* Start on watchdog */
+#define STARTON_VBUS		BIT(5)	/* Start on VBUS */
+#define STARTON_VBAT		BIT(4)	/* Start on battery insert */
+#define STARTON_RTC		BIT(3)	/* Start on RTC */
+#define STARTON_USB		BIT(2)	/* Start on USB host */
+#define STARTON_CHG		BIT(1)	/* Start on charger */
+#define STARTON_PWON		BIT(0)	/* Start on PWRON button */
+
 #define SEQ_OFFSYNC		(1 << 0)
 
 #define PHY_TO_OFF_PM_MASTER(p)		(p - 0x36)
@@ -606,6 +615,44 @@ twl4030_power_configure_resources(const struct twl4030_power_data *pdata)
 	return 0;
 }
 
+static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues)
+{
+	u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION,
+		       TWL4030_PM_MASTER_CFG_P2_TRANSITION,
+		       TWL4030_PM_MASTER_CFG_P3_TRANSITION, };
+	u8 val;
+	int i, err;
+
+	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
+			       TWL4030_PM_MASTER_PROTECT_KEY);
+	if (err)
+		goto relock;
+	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
+			       TWL4030_PM_MASTER_KEY_CFG2,
+			       TWL4030_PM_MASTER_PROTECT_KEY);
+	if (err)
+		goto relock;
+
+	for (i = 0; i < sizeof(regs); i++) {
+		err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER,
+				      &val, regs[i]);
+		if (err)
+			break;
+		val = (~bitmask & val) | (bitmask & bitvalues);
+		err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
+				       val, regs[i]);
+		if (err)
+			break;
+	}
+
+	if (err)
+		pr_err("TWL4030 Register access failed: %i\n", err);
+
+relock:
+	return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
+				TWL4030_PM_MASTER_PROTECT_KEY);
+}
+
 /*
  * In master mode, start the power off sequence.
  * After a successful execution, TWL shuts down the power to the SoC
@@ -615,6 +662,11 @@ void twl4030_power_off(void)
 {
 	int err;
 
+	/* Disable start on charger or VBUS as it can break poweroff */
+	err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0);
+	if (err)
+		pr_err("TWL4030 Unable to configure start-up\n");
+
 	err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF,
 			       TWL4030_PM_MASTER_P1_SW_EVENTS);
 	if (err)
diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c
index e00f5340ed87..3c2b8f9e3c84 100644
--- a/drivers/mfd/viperboard.c
+++ b/drivers/mfd/viperboard.c
@@ -93,8 +93,9 @@ static int vprbrd_probe(struct usb_interface *interface,
 		 version >> 8, version & 0xff,
 		 vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
 
-	ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs,
-				ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL);
+	ret = mfd_add_devices(&interface->dev, PLATFORM_DEVID_AUTO,
+				vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0,
+				NULL);
 	if (ret != 0) {
 		dev_err(&interface->dev, "Failed to add mfd devices to core.");
 		goto error;