mmc: Move host and card drivers to subdirs

Clean up the drivers/mmc directory by moving card and host drivers
into subdirectories.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

1 files changed, 0 insertions, 1001 deletions

diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
deleted file mode 100644
index e37943c314cb..000000000000
--- a/drivers/mmc/at91_mci.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- *  linux/drivers/mmc/at91_mci.c - ATMEL AT91 MCI Driver
- *
- *  Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
- *
- *  Copyright (C) 2006 Malcolm Noyes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
-   This is the AT91 MCI driver that has been tested with both MMC cards
-   and SD-cards.  Boards that support write protect are now supported.
-   The CCAT91SBC001 board does not support SD cards.
-
-   The three entry points are at91_mci_request, at91_mci_set_ios
-   and at91_mci_get_ro.
-
-   SET IOS
-     This configures the device to put it into the correct mode and clock speed
-     required.
-
-   MCI REQUEST
-     MCI request processes the commands sent in the mmc_request structure. This
-     can consist of a processing command and a stop command in the case of
-     multiple block transfers.
-
-     There are three main types of request, commands, reads and writes.
-
-     Commands are straight forward. The command is submitted to the controller and
-     the request function returns. When the controller generates an interrupt to indicate
-     the command is finished, the response to the command are read and the mmc_request_done
-     function called to end the request.
-
-     Reads and writes work in a similar manner to normal commands but involve the PDC (DMA)
-     controller to manage the transfers.
-
-     A read is done from the controller directly to the scatterlist passed in from the request.
-     Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte
-     swapped in the scatterlist buffers.  AT91SAM926x are not affected by this bug.
-
-     The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
-
-     A write is slightly different in that the bytes to write are read from the scatterlist
-     into a dma memory buffer (this is in case the source buffer should be read only). The
-     entire write buffer is then done from this single dma memory buffer.
-
-     The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY
-
-   GET RO
-     Gets the status of the write protect pin, if available.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/atmel_pdc.h>
-
-#include <linux/mmc/host.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/mmc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_mci.h>
-
-#define DRIVER_NAME "at91_mci"
-
-#undef	SUPPORT_4WIRE
-
-#define FL_SENT_COMMAND	(1 << 0)
-#define FL_SENT_STOP	(1 << 1)
-
-#define AT91_MCI_ERRORS	(AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE	\
-		| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE		\
-		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)			
-
-#define at91_mci_read(host, reg)	__raw_readl((host)->baseaddr + (reg))
-#define at91_mci_write(host, reg, val)	__raw_writel((val), (host)->baseaddr + (reg))
-
-
-/*
- * Low level type for this driver
- */
-struct at91mci_host
-{
-	struct mmc_host *mmc;
-	struct mmc_command *cmd;
-	struct mmc_request *request;
-
-	void __iomem *baseaddr;
-	int irq;
-
-	struct at91_mmc_data *board;
-	int present;
-
-	struct clk *mci_clk;
-
-	/*
-	 * Flag indicating when the command has been sent. This is used to
-	 * work out whether or not to send the stop
-	 */
-	unsigned int flags;
-	/* flag for current bus settings */
-	u32 bus_mode;
-
-	/* DMA buffer used for transmitting */
-	unsigned int* buffer;
-	dma_addr_t physical_address;
-	unsigned int total_length;
-
-	/* Latest in the scatterlist that has been enabled for transfer, but not freed */
-	int in_use_index;
-
-	/* Latest in the scatterlist that has been enabled for transfer */
-	int transfer_index;
-};
-
-/*
- * Copy from sg to a dma block - used for transfers
- */
-static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
-{
-	unsigned int len, i, size;
-	unsigned *dmabuf = host->buffer;
-
-	size = host->total_length;
-	len = data->sg_len;
-
-	/*
-	 * Just loop through all entries. Size might not
-	 * be the entire list though so make sure that
-	 * we do not transfer too much.
-	 */
-	for (i = 0; i < len; i++) {
-		struct scatterlist *sg;
-		int amount;
-		unsigned int *sgbuffer;
-
-		sg = &data->sg[i];
-
-		sgbuffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
-		amount = min(size, sg->length);
-		size -= amount;
-
-		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
-			int index;
-
-			for (index = 0; index < (amount / 4); index++)
-				*dmabuf++ = swab32(sgbuffer[index]);
-		}
-		else
-			memcpy(dmabuf, sgbuffer, amount);
-
-		kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
-
-		if (size == 0)
-			break;
-	}
-
-	/*
-	 * Check that we didn't get a request to transfer
-	 * more data than can fit into the SG list.
-	 */
-	BUG_ON(size != 0);
-}
-
-/*
- * Prepare a dma read
- */
-static void at91mci_pre_dma_read(struct at91mci_host *host)
-{
-	int i;
-	struct scatterlist *sg;
-	struct mmc_command *cmd;
-	struct mmc_data *data;
-
-	pr_debug("pre dma read\n");
-
-	cmd = host->cmd;
-	if (!cmd) {
-		pr_debug("no command\n");
-		return;
-	}
-
-	data = cmd->data;
-	if (!data) {
-		pr_debug("no data\n");
-		return;
-	}
-
-	for (i = 0; i < 2; i++) {
-		/* nothing left to transfer */
-		if (host->transfer_index >= data->sg_len) {
-			pr_debug("Nothing left to transfer (index = %d)\n", host->transfer_index);
-			break;
-		}
-
-		/* Check to see if this needs filling */
-		if (i == 0) {
-			if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
-				pr_debug("Transfer active in current\n");
-				continue;
-			}
-		}
-		else {
-			if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
-				pr_debug("Transfer active in next\n");
-				continue;
-			}
-		}
-
-		/* Setup the next transfer */
-		pr_debug("Using transfer index %d\n", host->transfer_index);
-
-		sg = &data->sg[host->transfer_index++];
-		pr_debug("sg = %p\n", sg);
-
-		sg->dma_address = dma_map_page(NULL, sg->page, sg->offset, sg->length, DMA_FROM_DEVICE);
-
-		pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
-
-		if (i == 0) {
-			at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
-			at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
-		}
-		else {
-			at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
-			at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
-		}
-	}
-
-	pr_debug("pre dma read done\n");
-}
-
-/*
- * Handle after a dma read
- */
-static void at91mci_post_dma_read(struct at91mci_host *host)
-{
-	struct mmc_command *cmd;
-	struct mmc_data *data;
-
-	pr_debug("post dma read\n");
-
-	cmd = host->cmd;
-	if (!cmd) {
-		pr_debug("no command\n");
-		return;
-	}
-
-	data = cmd->data;
-	if (!data) {
-		pr_debug("no data\n");
-		return;
-	}
-
-	while (host->in_use_index < host->transfer_index) {
-		unsigned int *buffer;
-
-		struct scatterlist *sg;
-
-		pr_debug("finishing index %d\n", host->in_use_index);
-
-		sg = &data->sg[host->in_use_index++];
-
-		pr_debug("Unmapping page %08X\n", sg->dma_address);
-
-		dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE);
-
-		/* Swap the contents of the buffer */
-		buffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
-		pr_debug("buffer = %p, length = %d\n", buffer, sg->length);
-
-		data->bytes_xfered += sg->length;
-
-		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
-			int index;
-
-			for (index = 0; index < (sg->length / 4); index++)
-				buffer[index] = swab32(buffer[index]);
-		}
-
-		kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
-		flush_dcache_page(sg->page);
-	}
-
-	/* Is there another transfer to trigger? */
-	if (host->transfer_index < data->sg_len)
-		at91mci_pre_dma_read(host);
-	else {
-		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-	}
-
-	pr_debug("post dma read done\n");
-}
-
-/*
- * Handle transmitted data
- */
-static void at91_mci_handle_transmitted(struct at91mci_host *host)
-{
-	struct mmc_command *cmd;
-	struct mmc_data *data;
-
-	pr_debug("Handling the transmit\n");
-
-	/* Disable the transfer */
-	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
-	/* Now wait for cmd ready */
-	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-
-	cmd = host->cmd;
-	if (!cmd) return;
-
-	data = cmd->data;
-	if (!data) return;
-
-	data->bytes_xfered = host->total_length;
-}
-
-/*
- * Enable the controller
- */
-static void at91_mci_enable(struct at91mci_host *host)
-{
-	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-	at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
-	at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
-
-	/* use Slot A or B (only one at same time) */
-	at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
-}
-
-/*
- * Disable the controller
- */
-static void at91_mci_disable(struct at91mci_host *host)
-{
-	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
-}
-
-/*
- * Send a command
- * return the interrupts to enable
- */
-static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
-{
-	unsigned int cmdr, mr;
-	unsigned int block_length;
-	struct mmc_data *data = cmd->data;
-
-	unsigned int blocks;
-	unsigned int ier = 0;
-
-	host->cmd = cmd;
-
-	/* Not sure if this is needed */
-#if 0
-	if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
-		pr_debug("Clearing timeout\n");
-		at91_mci_write(host, AT91_MCI_ARGR, 0);
-		at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD);
-		while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
-			/* spin */
-			pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
-		}
-	}
-#endif
-	cmdr = cmd->opcode;
-
-	if (mmc_resp_type(cmd) == MMC_RSP_NONE)
-		cmdr |= AT91_MCI_RSPTYP_NONE;
-	else {
-		/* if a response is expected then allow maximum response latancy */
-		cmdr |= AT91_MCI_MAXLAT;
-		/* set 136 bit response for R2, 48 bit response otherwise */
-		if (mmc_resp_type(cmd) == MMC_RSP_R2)
-			cmdr |= AT91_MCI_RSPTYP_136;
-		else
-			cmdr |= AT91_MCI_RSPTYP_48;
-	}
-
-	if (data) {
-		block_length = data->blksz;
-		blocks = data->blocks;
-
-		/* always set data start - also set direction flag for read */
-		if (data->flags & MMC_DATA_READ)
-			cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START);
-		else if (data->flags & MMC_DATA_WRITE)
-			cmdr |= AT91_MCI_TRCMD_START;
-
-		if (data->flags & MMC_DATA_STREAM)
-			cmdr |= AT91_MCI_TRTYP_STREAM;
-		if (data->flags & MMC_DATA_MULTI)
-			cmdr |= AT91_MCI_TRTYP_MULTIPLE;
-	}
-	else {
-		block_length = 0;
-		blocks = 0;
-	}
-
-	if (cmd->opcode == MMC_STOP_TRANSMISSION)
-		cmdr |= AT91_MCI_TRCMD_STOP;
-
-	if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		cmdr |= AT91_MCI_OPDCMD;
-
-	/*
-	 * Set the arguments and send the command
-	 */
-	pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
-		cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
-
-	if (!data) {
-		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
-		at91_mci_write(host, ATMEL_PDC_RPR, 0);
-		at91_mci_write(host, ATMEL_PDC_RCR, 0);
-		at91_mci_write(host, ATMEL_PDC_RNPR, 0);
-		at91_mci_write(host, ATMEL_PDC_RNCR, 0);
-		at91_mci_write(host, ATMEL_PDC_TPR, 0);
-		at91_mci_write(host, ATMEL_PDC_TCR, 0);
-		at91_mci_write(host, ATMEL_PDC_TNPR, 0);
-		at91_mci_write(host, ATMEL_PDC_TNCR, 0);
-
-		at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
-		at91_mci_write(host, AT91_MCI_CMDR, cmdr);
-		return AT91_MCI_CMDRDY;
-	}
-
-	mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;	/* zero block length and PDC mode */
-	at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
-
-	/*
-	 * Disable the PDC controller
-	 */
-	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
-	if (cmdr & AT91_MCI_TRCMD_START) {
-		data->bytes_xfered = 0;
-		host->transfer_index = 0;
-		host->in_use_index = 0;
-		if (cmdr & AT91_MCI_TRDIR) {
-			/*
-			 * Handle a read
-			 */
-			host->buffer = NULL;
-			host->total_length = 0;
-
-			at91mci_pre_dma_read(host);
-			ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
-		}
-		else {
-			/*
-			 * Handle a write
-			 */
-			host->total_length = block_length * blocks;
-			host->buffer = dma_alloc_coherent(NULL,
-						  host->total_length,
-						  &host->physical_address, GFP_KERNEL);
-
-			at91mci_sg_to_dma(host, data);
-
-			pr_debug("Transmitting %d bytes\n", host->total_length);
-
-			at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
-			at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
-			ier = AT91_MCI_TXBUFE;
-		}
-	}
-
-	/*
-	 * Send the command and then enable the PDC - not the other way round as
-	 * the data sheet says
-	 */
-
-	at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
-	at91_mci_write(host, AT91_MCI_CMDR, cmdr);
-
-	if (cmdr & AT91_MCI_TRCMD_START) {
-		if (cmdr & AT91_MCI_TRDIR)
-			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
-		else
-			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
-	}
-	return ier;
-}
-
-/*
- * Wait for a command to complete
- */
-static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
-{
-	unsigned int ier;
-
-	ier = at91_mci_send_command(host, cmd);
-
-	pr_debug("setting ier to %08X\n", ier);
-
-	/* Stop on errors or the required value */
-	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
-}
-
-/*
- * Process the next step in the request
- */
-static void at91mci_process_next(struct at91mci_host *host)
-{
-	if (!(host->flags & FL_SENT_COMMAND)) {
-		host->flags |= FL_SENT_COMMAND;
-		at91mci_process_command(host, host->request->cmd);
-	}
-	else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
-		host->flags |= FL_SENT_STOP;
-		at91mci_process_command(host, host->request->stop);
-	}
-	else
-		mmc_request_done(host->mmc, host->request);
-}
-
-/*
- * Handle a command that has been completed
- */
-static void at91mci_completed_command(struct at91mci_host *host)
-{
-	struct mmc_command *cmd = host->cmd;
-	unsigned int status;
-
-	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-
-	cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
-	cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
-	cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2));
-	cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
-
-	if (host->buffer) {
-		dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
-		host->buffer = NULL;
-	}
-
-	status = at91_mci_read(host, AT91_MCI_SR);
-
-	pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
-		 status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-
-	if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
-			AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
-			AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
-		if ((status & AT91_MCI_RCRCE) &&
-			((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
-			cmd->error = MMC_ERR_NONE;
-		}
-		else {
-			if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE))
-				cmd->error = MMC_ERR_TIMEOUT;
-			else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE))
-				cmd->error = MMC_ERR_BADCRC;
-			else if (status & (AT91_MCI_OVRE | AT91_MCI_UNRE))
-				cmd->error = MMC_ERR_FIFO;
-			else
-				cmd->error = MMC_ERR_FAILED;
-
-			pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n",
-				 cmd->error, cmd->opcode, cmd->retries);
-		}
-	}
-	else
-		cmd->error = MMC_ERR_NONE;
-
-	at91mci_process_next(host);
-}
-
-/*
- * Handle an MMC request
- */
-static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-	struct at91mci_host *host = mmc_priv(mmc);
-	host->request = mrq;
-	host->flags = 0;
-
-	at91mci_process_next(host);
-}
-
-/*
- * Set the IOS
- */
-static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-	int clkdiv;
-	struct at91mci_host *host = mmc_priv(mmc);
-	unsigned long at91_master_clock = clk_get_rate(host->mci_clk);
-
-	host->bus_mode = ios->bus_mode;
-
-	if (ios->clock == 0) {
-		/* Disable the MCI controller */
-		at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS);
-		clkdiv = 0;
-	}
-	else {
-		/* Enable the MCI controller */
-		at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-
-		if ((at91_master_clock % (ios->clock * 2)) == 0)
-			clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
-		else
-			clkdiv = (at91_master_clock / ios->clock) / 2;
-
-		pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
-			at91_master_clock / (2 * (clkdiv + 1)));
-	}
-	if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
-		pr_debug("MMC: Setting controller bus width to 4\n");
-		at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
-	}
-	else {
-		pr_debug("MMC: Setting controller bus width to 1\n");
-		at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
-	}
-
-	/* Set the clock divider */
-	at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
-
-	/* maybe switch power to the card */
-	if (host->board->vcc_pin) {
-		switch (ios->power_mode) {
-			case MMC_POWER_OFF:
-				at91_set_gpio_value(host->board->vcc_pin, 0);
-				break;
-			case MMC_POWER_UP:
-			case MMC_POWER_ON:
-				at91_set_gpio_value(host->board->vcc_pin, 1);
-				break;
-		}
-	}
-}
-
-/*
- * Handle an interrupt
- */
-static irqreturn_t at91_mci_irq(int irq, void *devid)
-{
-	struct at91mci_host *host = devid;
-	int completed = 0;
-	unsigned int int_status, int_mask;
-
-	int_status = at91_mci_read(host, AT91_MCI_SR);
-	int_mask = at91_mci_read(host, AT91_MCI_IMR);
-	
-	pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
-		int_status & int_mask);
-	
-	int_status = int_status & int_mask;
-
-	if (int_status & AT91_MCI_ERRORS) {
-		completed = 1;
-		
-		if (int_status & AT91_MCI_UNRE)
-			pr_debug("MMC: Underrun error\n");
-		if (int_status & AT91_MCI_OVRE)
-			pr_debug("MMC: Overrun error\n");
-		if (int_status & AT91_MCI_DTOE)
-			pr_debug("MMC: Data timeout\n");
-		if (int_status & AT91_MCI_DCRCE)
-			pr_debug("MMC: CRC error in data\n");
-		if (int_status & AT91_MCI_RTOE)
-			pr_debug("MMC: Response timeout\n");
-		if (int_status & AT91_MCI_RENDE)
-			pr_debug("MMC: Response end bit error\n");
-		if (int_status & AT91_MCI_RCRCE)
-			pr_debug("MMC: Response CRC error\n");
-		if (int_status & AT91_MCI_RDIRE)
-			pr_debug("MMC: Response direction error\n");
-		if (int_status & AT91_MCI_RINDE)
-			pr_debug("MMC: Response index error\n");
-	} else {
-		/* Only continue processing if no errors */
-
-		if (int_status & AT91_MCI_TXBUFE) {
-			pr_debug("TX buffer empty\n");
-			at91_mci_handle_transmitted(host);
-		}
-
-		if (int_status & AT91_MCI_RXBUFF) {
-			pr_debug("RX buffer full\n");
-			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
-		}
-
-		if (int_status & AT91_MCI_ENDTX)
-			pr_debug("Transmit has ended\n");
-
-		if (int_status & AT91_MCI_ENDRX) {
-			pr_debug("Receive has ended\n");
-			at91mci_post_dma_read(host);
-		}
-
-		if (int_status & AT91_MCI_NOTBUSY) {
-			pr_debug("Card is ready\n");
-			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
-		}
-
-		if (int_status & AT91_MCI_DTIP)
-			pr_debug("Data transfer in progress\n");
-
-		if (int_status & AT91_MCI_BLKE)
-			pr_debug("Block transfer has ended\n");
-
-		if (int_status & AT91_MCI_TXRDY)
-			pr_debug("Ready to transmit\n");
-
-		if (int_status & AT91_MCI_RXRDY)
-			pr_debug("Ready to receive\n");
-
-		if (int_status & AT91_MCI_CMDRDY) {
-			pr_debug("Command ready\n");
-			completed = 1;
-		}
-	}
-
-	if (completed) {
-		pr_debug("Completed command\n");
-		at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-		at91mci_completed_command(host);
-	} else
-		at91_mci_write(host, AT91_MCI_IDR, int_status);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
-{
-	struct at91mci_host *host = _host;
-	int present = !at91_get_gpio_value(irq);
-
-	/*
-	 * we expect this irq on both insert and remove,
-	 * and use a short delay to debounce.
-	 */
-	if (present != host->present) {
-		host->present = present;
-		pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-			present ? "insert" : "remove");
-		if (!present) {
-			pr_debug("****** Resetting SD-card bus width ******\n");
-			at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
-		}
-		mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-	}
-	return IRQ_HANDLED;
-}
-
-static int at91_mci_get_ro(struct mmc_host *mmc)
-{
-	int read_only = 0;
-	struct at91mci_host *host = mmc_priv(mmc);
-
-	if (host->board->wp_pin) {
-		read_only = at91_get_gpio_value(host->board->wp_pin);
-		printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
-				(read_only ? "read-only" : "read-write") );
-	}
-	else {
-		printk(KERN_WARNING "%s: host does not support reading read-only "
-				"switch.  Assuming write-enable.\n", mmc_hostname(mmc));
-	}
-	return read_only;
-}
-
-static const struct mmc_host_ops at91_mci_ops = {
-	.request	= at91_mci_request,
-	.set_ios	= at91_mci_set_ios,
-	.get_ro		= at91_mci_get_ro,
-};
-
-/*
- * Probe for the device
- */
-static int __init at91_mci_probe(struct platform_device *pdev)
-{
-	struct mmc_host *mmc;
-	struct at91mci_host *host;
-	struct resource *res;
-	int ret;
-
-	pr_debug("Probe MCI devices\n");
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
-
-	if (!request_mem_region(res->start, res->end - res->start + 1, DRIVER_NAME))
-		return -EBUSY;
-
-	mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
-	if (!mmc) {
-		pr_debug("Failed to allocate mmc host\n");
-		release_mem_region(res->start, res->end - res->start + 1);
-		return -ENOMEM;
-	}
-
-	mmc->ops = &at91_mci_ops;
-	mmc->f_min = 375000;
-	mmc->f_max = 25000000;
-	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-	mmc->caps = MMC_CAP_BYTEBLOCK;
-
-	mmc->max_blk_size = 4095;
-	mmc->max_blk_count = mmc->max_req_size;
-
-	host = mmc_priv(mmc);
-	host->mmc = mmc;
-	host->buffer = NULL;
-	host->bus_mode = 0;
-	host->board = pdev->dev.platform_data;
-	if (host->board->wire4) {
-#ifdef SUPPORT_4WIRE
-		mmc->caps |= MMC_CAP_4_BIT_DATA;
-#else
-		printk("AT91 MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
-#endif
-	}
-
-	/*
-	 * Get Clock
-	 */
-	host->mci_clk = clk_get(&pdev->dev, "mci_clk");
-	if (IS_ERR(host->mci_clk)) {
-		printk(KERN_ERR "AT91 MMC: no clock defined.\n");
-		mmc_free_host(mmc);
-		release_mem_region(res->start, res->end - res->start + 1);
-		return -ENODEV;
-	}
-
-	/*
-	 * Map I/O region
-	 */
-	host->baseaddr = ioremap(res->start, res->end - res->start + 1);
-	if (!host->baseaddr) {
-		clk_put(host->mci_clk);
-		mmc_free_host(mmc);
-		release_mem_region(res->start, res->end - res->start + 1);
-		return -ENOMEM;
-	}
-
-	/*
-	 * Reset hardware
-	 */
-	clk_enable(host->mci_clk);		/* Enable the peripheral clock */
-	at91_mci_disable(host);
-	at91_mci_enable(host);
-
-	/*
-	 * Allocate the MCI interrupt
-	 */
-	host->irq = platform_get_irq(pdev, 0);
-	ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
-	if (ret) {
-		printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
-		clk_disable(host->mci_clk);
-		clk_put(host->mci_clk);
-		mmc_free_host(mmc);
-		iounmap(host->baseaddr);
-		release_mem_region(res->start, res->end - res->start + 1);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, mmc);
-
-	/*
-	 * Add host to MMC layer
-	 */
-	if (host->board->det_pin)
-		host->present = !at91_get_gpio_value(host->board->det_pin);
-	else
-		host->present = -1;
-
-	mmc_add_host(mmc);
-
-	/*
-	 * monitor card insertion/removal if we can
-	 */
-	if (host->board->det_pin) {
-		ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
-				0, DRIVER_NAME, host);
-		if (ret)
-			printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
-	}
-
-	pr_debug("Added MCI driver\n");
-
-	return 0;
-}
-
-/*
- * Remove a device
- */
-static int __exit at91_mci_remove(struct platform_device *pdev)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-	struct at91mci_host *host;
-	struct resource *res;
-
-	if (!mmc)
-		return -1;
-
-	host = mmc_priv(mmc);
-
-	if (host->present != -1) {
-		free_irq(host->board->det_pin, host);
-		cancel_delayed_work(&host->mmc->detect);
-	}
-
-	at91_mci_disable(host);
-	mmc_remove_host(mmc);
-	free_irq(host->irq, host);
-
-	clk_disable(host->mci_clk);			/* Disable the peripheral clock */
-	clk_put(host->mci_clk);
-
-	iounmap(host->baseaddr);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
-
-	mmc_free_host(mmc);
-	platform_set_drvdata(pdev, NULL);
-	pr_debug("MCI Removed\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-	int ret = 0;
-
-	if (mmc)
-		ret = mmc_suspend_host(mmc, state);
-
-	return ret;
-}
-
-static int at91_mci_resume(struct platform_device *pdev)
-{
-	struct mmc_host *mmc = platform_get_drvdata(pdev);
-	int ret = 0;
-
-	if (mmc)
-		ret = mmc_resume_host(mmc);
-
-	return ret;
-}
-#else
-#define at91_mci_suspend	NULL
-#define at91_mci_resume		NULL
-#endif
-
-static struct platform_driver at91_mci_driver = {
-	.remove		= __exit_p(at91_mci_remove),
-	.suspend	= at91_mci_suspend,
-	.resume		= at91_mci_resume,
-	.driver		= {
-		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init at91_mci_init(void)
-{
-	return platform_driver_probe(&at91_mci_driver, at91_mci_probe);
-}
-
-static void __exit at91_mci_exit(void)
-{
-	platform_driver_unregister(&at91_mci_driver);
-}
-
-module_init(at91_mci_init);
-module_exit(at91_mci_exit);
-
-MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver");
-MODULE_AUTHOR("Nick Randell");
-MODULE_LICENSE("GPL");