summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/mmci.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 20:30:02 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 20:30:02 +0100
commitb1286f4e9ac14c8973140b338b4d3c5691264d3b (patch)
tree5a67788bb2276cd67230d24b5a6994ddafb10707 /drivers/mmc/host/mmci.c
parentMerge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 (diff)
parentMerge branch 'devel-stable' into for-linus (diff)
downloadlinux-b1286f4e9ac14c8973140b338b4d3c5691264d3b.tar.xz
linux-b1286f4e9ac14c8973140b338b4d3c5691264d3b.zip
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ...
Diffstat (limited to 'drivers/mmc/host/mmci.c')
-rw-r--r--drivers/mmc/host/mmci.c66
1 files changed, 45 insertions, 21 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index ec28d175d9c8..150772395cc6 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -33,6 +33,7 @@
#include <linux/amba/mmci.h>
#include <linux/pm_runtime.h>
#include <linux/types.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/div64.h>
#include <asm/io.h>
@@ -654,9 +655,31 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
/* The ST Micro variants has a special bit to enable SDIO */
if (variant->sdio && host->mmc->card)
- if (mmc_card_sdio(host->mmc->card))
+ if (mmc_card_sdio(host->mmc->card)) {
+ /*
+ * The ST Micro variants has a special bit
+ * to enable SDIO.
+ */
+ u32 clk;
+
datactrl |= MCI_ST_DPSM_SDIOEN;
+ /*
+ * The ST Micro variant for SDIO small write transfers
+ * needs to have clock H/W flow control disabled,
+ * otherwise the transfer will not start. The threshold
+ * depends on the rate of MCLK.
+ */
+ if (data->flags & MMC_DATA_WRITE &&
+ (host->size < 8 ||
+ (host->size <= 8 && host->mclk > 50000000)))
+ clk = host->clk_reg & ~variant->clkreg_enable;
+ else
+ clk = host->clk_reg | variant->clkreg_enable;
+
+ mmci_write_clkreg(host, clk);
+ }
+
/*
* Attempt to use DMA operation mode, if this
* should fail, fall back to PIO mode
@@ -840,14 +863,14 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema
if (unlikely(count & 0x3)) {
if (count < 4) {
unsigned char buf[4];
- readsl(base + MMCIFIFO, buf, 1);
+ ioread32_rep(base + MMCIFIFO, buf, 1);
memcpy(ptr, buf, count);
} else {
- readsl(base + MMCIFIFO, ptr, count >> 2);
+ ioread32_rep(base + MMCIFIFO, ptr, count >> 2);
count &= ~0x3;
}
} else {
- readsl(base + MMCIFIFO, ptr, count >> 2);
+ ioread32_rep(base + MMCIFIFO, ptr, count >> 2);
}
ptr += count;
@@ -877,22 +900,6 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
count = min(remain, maxcnt);
/*
- * The ST Micro variant for SDIO transfer sizes
- * less then 8 bytes should have clock H/W flow
- * control disabled.
- */
- if (variant->sdio &&
- mmc_card_sdio(host->mmc->card)) {
- u32 clk;
- if (count < 8)
- clk = host->clk_reg & ~variant->clkreg_enable;
- else
- clk = host->clk_reg | variant->clkreg_enable;
-
- mmci_write_clkreg(host, clk);
- }
-
- /*
* SDIO especially may want to send something that is
* not divisible by 4 (as opposed to card sectors
* etc), and the FIFO only accept full 32-bit writes.
@@ -900,7 +907,7 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
* byte become a 32bit write, 7 bytes will be two
* 32bit writes etc.
*/
- writesl(base + MMCIFIFO, ptr, (count + 3) >> 2);
+ iowrite32_rep(base + MMCIFIFO, ptr, (count + 3) >> 2);
ptr += count;
remain -= count;
@@ -1360,6 +1367,23 @@ static int mmci_probe(struct amba_device *dev,
mmc->f_max = min(host->mclk, fmax);
dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);
+ host->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(host->pinctrl)) {
+ ret = PTR_ERR(host->pinctrl);
+ goto clk_disable;
+ }
+
+ host->pins_default = pinctrl_lookup_state(host->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+
+ /* enable pins to be muxed in and configured */
+ if (!IS_ERR(host->pins_default)) {
+ ret = pinctrl_select_state(host->pinctrl, host->pins_default);
+ if (ret)
+ dev_warn(&dev->dev, "could not set default pins\n");
+ } else
+ dev_warn(&dev->dev, "could not get default pinstate\n");
+
#ifdef CONFIG_REGULATOR
/* If we're using the regulator framework, try to fetch a regulator */
host->vcc = regulator_get(&dev->dev, "vmmc");