mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts

Add O2Micro/BayHubTech SD Host DeviceId 8520 support.
Add O2Micro/BayHubTech SD Host DeviceId 8420 & 8421 support.
Add O2Micro/BayHubTech SD Host DeviceId 8620 & 8621 support.

These card readers are used in laptops like Lenovo ThinkPad W540,
Dell Latitude E5440, Dell Latitude E6540.

Signed-off-by: Peter Guo <peter.guo@bayhubtech.com>
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Chris Ball <chris@printf.net>

1 files changed, 45 insertions, 60 deletions

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index af446592d974..c1a7f31c66a9 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -28,6 +28,7 @@
 
 #include "sdhci.h"
 #include "sdhci-pci.h"
+#include "sdhci-pci-o2micro.h"
 
 /*****************************************************************************\
  *                                                                           *
@@ -321,65 +322,6 @@ static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = {
 #define O2_SD_ADMA2		0xE7
 #define O2_SD_INF_MOD		0xF1
 
-static int o2_probe(struct sdhci_pci_chip *chip)
-{
-	int ret;
-	u8 scratch;
-
-	switch (chip->pdev->device) {
-	case PCI_DEVICE_ID_O2_8220:
-	case PCI_DEVICE_ID_O2_8221:
-	case PCI_DEVICE_ID_O2_8320:
-	case PCI_DEVICE_ID_O2_8321:
-		/* This extra setup is required due to broken ADMA. */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
-		if (ret)
-			return ret;
-		scratch &= 0x7f;
-		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
-
-		/* Set Multi 3 to VCC3V# */
-		pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
-
-		/* Disable CLK_REQ# support after media DET */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_CLKREQ, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x20;
-		pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
-
-		/* Choose capabilities, enable SDMA.  We have to write 0x01
-		 * to the capabilities register first to unlock it.
-		 */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x01;
-		pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
-		pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
-
-		/* Disable ADMA1/2 */
-		pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
-		pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
-
-		/* Disable the infinite transfer mode */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_INF_MOD, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x08;
-		pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
-
-		/* Lock WP */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x80;
-		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
-	}
-
-	return 0;
-}
-
 static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
 {
 	u8 scratch;
@@ -570,7 +512,10 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
 }
 
 static const struct sdhci_pci_fixes sdhci_o2 = {
-	.probe		= o2_probe,
+	.probe = sdhci_pci_o2_probe,
+	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.probe_slot = sdhci_pci_o2_probe_slot,
+	.resume = sdhci_pci_o2_resume,
 };
 
 static const struct sdhci_pci_fixes sdhci_jmicron = {
@@ -983,6 +928,46 @@ static const struct pci_device_id pci_ids[] = {
 		.driver_data	= (kernel_ulong_t)&sdhci_o2,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_FUJIN2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SDS0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SDS1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SEABIRD0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SEABIRD1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},