diff options
| author | Haibo Chen <haibo.chen@freescale.com> | 2015-08-11 13:38:31 +0200 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2015-08-27 14:50:51 +0200 |
| commit | e31e67cf2578bd05e99afabb22403542306d6bed (patch) | |
| tree | 7b352666b8e99e7c003b82068446d21a37d68392 /drivers/mmc/host | |
| parent | mmc: sdhci-esdhc-imx: set back the burst_length_enable bit to 1 (diff) | |
| download | linux-e31e67cf2578bd05e99afabb22403542306d6bed.tar.xz linux-e31e67cf2578bd05e99afabb22403542306d6bed.zip | |
mmc: sdhci-esdhc-imx: change default watermark level and burst length
By default, for all imx SoC types, the watermark level is 16, and the
burst length is 8. But if the SDIO/SD/MMC I/O speed is fast enough,
this default watermark level and burst length will be the performance
bottleneck.
For example, i.MX7D support eMMC HS400 mode, this mode can run in 8 bit,
200MHZ DDR mode. So the I/O speed improve a lot compare to SD3.0.
The default burst length is 8, if we don't change this value, in
HS400 mode, when we do eMMC read operation, we can find that the
clock signal will stop for a period of time. This means the speed
of data moving on AHB bus is slower than I/O speed. So we should
improve the speed of data moving on AHB bus.
This patch set the default burst length as 16, and set the default
watermark level as 64. The test result is the clock signal has
no stop during the eMMC HS400 operation.
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Acked-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index ac8ec01b89aa..886d230f41d0 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1160,7 +1160,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) * to something insane. Change it back here. */ if (esdhc_is_usdhc(imx_data)) { - writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL); + writel(0x10401040, host->ioaddr + ESDHC_WTMK_LVL); + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; host->mmc->caps |= MMC_CAP_1_8V_DDR; |