tmio_mmc: fix clock setup

This patch fixes the clock setup in tmio_mmc.

  * Incorrect divider setting
  * Cruft written to the clock registers (seemingly harmless but Not
Good (tm))

It also eliminates some unnecessary ifs and tidies the loop syntax.

Thanks to Philipp Zabel who discovered the divider issue, commenting

   "Except for the SDCLK = HCLK (divider bypassed) case, the clock
    setting resulted in double the requested frequency.
    The smallest possible frequency (f_max/512) is configured with
    a divider setting 0x80, not 0x40."

Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

1 files changed, 5 insertions, 10 deletions

diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index fe6d2b6c0161..10951b7131d6 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -37,22 +37,17 @@
 
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 {
-	u32 clk = 0, clock, f_min = host->mmc->f_min;
+	u32 clk = 0, clock;
 
 	if (new_clock) {
-		for (clock = f_min, clk = 0x100; new_clock >= (clock<<1); ) {
+		for (clock = host->mmc->f_min, clk = 0x80000080;
+			new_clock >= (clock<<1); clk >>= 1)
 			clock <<= 1;
-			clk >>= 1;
-		}
-		if (clk & 0x1)
-			clk = 0x20000;
-
-		clk >>= 2;
-		sd_config_write8(host, CNF_SD_CLK_MODE, (clk & 0x8000) ? 0 : 1);
 		clk |= 0x100;
 	}
 
-	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk);
+	sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
 }
 
 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)