Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 233 insertions, 0 deletions

diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
new file mode 100644
index 000000000000..0ece3786d6ea
--- /dev/null
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -0,0 +1,233 @@
+/* linux/drivers/mtd/maps/scx200_docflash.c 
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   $Id: scx200_docflash.c,v 1.10 2004/11/28 09:40:40 dwmw2 Exp $ 
+
+   National Semiconductor SCx200 flash mapped with DOCCS
+*/
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/pci.h>
+#include <linux/scx200.h>
+
+#define NAME "scx200_docflash"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>");
+MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver");
+MODULE_LICENSE("GPL");
+
+static int probe = 0;		/* Don't autoprobe */
+static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */
+static unsigned width = 8;	/* Default to 8 bits wide */
+static char *flashtype = "cfi_probe";
+
+module_param(probe, int, 0);
+MODULE_PARM_DESC(probe, "Probe for a BIOS mapping");
+module_param(size, int, 0);
+MODULE_PARM_DESC(size, "Size of the flash mapping");
+module_param(width, int, 0);
+MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)");
+module_param(flashtype, charp, 0);
+MODULE_PARM_DESC(flashtype, "Type of MTD probe to do");
+
+static struct resource docmem = {
+	.flags = IORESOURCE_MEM,
+	.name  = "NatSemi SCx200 DOCCS Flash",
+};
+
+static struct mtd_info *mymtd;
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition partition_info[] = {
+	{ 
+		.name   = "DOCCS Boot kernel", 
+		.offset = 0, 
+		.size   = 0xc0000
+	},
+	{ 
+		.name   = "DOCCS Low BIOS", 
+		.offset = 0xc0000, 
+		.size   = 0x40000
+	},
+	{ 
+		.name   = "DOCCS File system", 
+		.offset = 0x100000, 
+		.size   = ~0	/* calculate from flash size */
+	},
+	{ 
+		.name   = "DOCCS High BIOS", 
+		.offset = ~0, 	/* calculate from flash size */
+		.size   = 0x80000
+	},
+};
+#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
+#endif
+
+
+static struct map_info scx200_docflash_map = {
+	.name      = "NatSemi SCx200 DOCCS Flash",
+};
+
+static int __init init_scx200_docflash(void)
+{
+	unsigned u;
+	unsigned base;
+	unsigned ctrl;
+	unsigned pmr;
+	struct pci_dev *bridge;
+
+	printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
+
+	if ((bridge = pci_find_device(PCI_VENDOR_ID_NS, 
+				      PCI_DEVICE_ID_NS_SCx200_BRIDGE,
+				      NULL)) == NULL)
+		return -ENODEV;
+
+	/* check that we have found the configuration block */
+	if (!scx200_cb_present())
+		return -ENODEV;
+
+	if (probe) {
+		/* Try to use the present flash mapping if any */
+		pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base);
+		pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl);
+		pmr = inl(scx200_cb_base + SCx200_PMR);
+
+		if (base == 0
+		    || (ctrl & 0x07000000) != 0x07000000
+		    || (ctrl & 0x0007ffff) == 0)
+			return -ENODEV;
+
+		size = ((ctrl&0x1fff)<<13) + (1<<13);
+
+		for (u = size; u > 1; u >>= 1)
+			;
+		if (u != 1)
+			return -ENODEV;
+
+		if (pmr & (1<<6))
+			width = 16;
+		else
+			width = 8;
+
+		docmem.start = base;
+		docmem.end = base + size;
+
+		if (request_resource(&iomem_resource, &docmem)) {
+			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
+			return -ENOMEM;
+		}
+	} else {
+		for (u = size; u > 1; u >>= 1)
+			;
+		if (u != 1) {
+			printk(KERN_ERR NAME ": invalid size for flash mapping\n");
+			return -EINVAL;
+		}
+		
+		if (width != 8 && width != 16) {
+			printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
+			return -EINVAL;
+		}
+		
+		if (allocate_resource(&iomem_resource, &docmem, 
+				      size,
+				      0xc0000000, 0xffffffff, 
+				      size, NULL, NULL)) {
+			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
+			return -ENOMEM;
+		}
+		
+		ctrl = 0x07000000 | ((size-1) >> 13);
+
+		printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
+		
+		pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start);
+		pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl);
+		pmr = inl(scx200_cb_base + SCx200_PMR);
+		
+		if (width == 8) {
+			pmr &= ~(1<<6);
+		} else {
+			pmr |= (1<<6);
+		}
+		outl(pmr, scx200_cb_base + SCx200_PMR);
+	}
+	
+       	printk(KERN_INFO NAME ": DOCCS mapped at 0x%lx-0x%lx, width %d\n", 
+	       docmem.start, docmem.end, width);
+
+	scx200_docflash_map.size = size;
+	if (width == 8)
+		scx200_docflash_map.bankwidth = 1;
+	else
+		scx200_docflash_map.bankwidth = 2;
+
+	simple_map_init(&scx200_docflash_map);
+
+	scx200_docflash_map.phys = docmem.start;
+	scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size);
+	if (!scx200_docflash_map.virt) {
+		printk(KERN_ERR NAME ": failed to ioremap the flash\n");
+		release_resource(&docmem);
+		return -EIO;
+	}
+
+	mymtd = do_map_probe(flashtype, &scx200_docflash_map);
+	if (!mymtd) {
+		printk(KERN_ERR NAME ": unable to detect flash\n");
+		iounmap(scx200_docflash_map.virt);
+		release_resource(&docmem);
+		return -ENXIO;
+	}
+
+	if (size < mymtd->size)
+		printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n");
+
+	mymtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	partition_info[3].offset = mymtd->size-partition_info[3].size;
+	partition_info[2].size = partition_info[3].offset-partition_info[2].offset;
+	add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
+#else
+	add_mtd_device(mymtd);
+#endif
+	return 0;
+}
+
+static void __exit cleanup_scx200_docflash(void)
+{
+	if (mymtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+		del_mtd_partitions(mymtd);
+#else
+		del_mtd_device(mymtd);
+#endif
+		map_destroy(mymtd);
+	}
+	if (scx200_docflash_map.virt) {
+		iounmap(scx200_docflash_map.virt);
+		release_resource(&docmem);
+	}
+}
+
+module_init(init_scx200_docflash);
+module_exit(cleanup_scx200_docflash);
+
+/*
+    Local variables:
+        compile-command: "make -k -C ../../.. SUBDIRS=drivers/mtd/maps modules"
+        c-basic-offset: 8
+    End:
+*/