[MTD NAND] Indent all of drivers/mtd/nand/*.c.

It was just too painful to deal with.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

1 files changed, 73 insertions, 70 deletions

diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index bde3550910a2..50cbfd4826fb 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -38,22 +38,20 @@
  */
 static struct mtd_info *au1550_mtd = NULL;
 static void __iomem *p_nand;
-static int nand_width = 1; /* default x8*/
+static int nand_width = 1;	/* default x8 */
 
 /*
  * Define partitions for flash device
  */
 static const struct mtd_partition partition_info[] = {
 	{
-		.name 	= "NAND FS 0",
-	  	.offset = 0,
-	  	.size 	= 8*1024*1024
-	},
+	 .name = "NAND FS 0",
+	 .offset = 0,
+	 .size = 8 * 1024 * 1024},
 	{
-		.name 	= "NAND FS 1",
-		.offset =  MTDPART_OFS_APPEND,
- 		.size 	=    MTDPART_SIZ_FULL
-	}
+	 .name = "NAND FS 1",
+	 .offset = MTDPART_OFS_APPEND,
+	 .size = MTDPART_SIZ_FULL}
 };
 
 /**
@@ -157,7 +155,7 @@ static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 	int i;
 	struct nand_chip *this = mtd->priv;
 
-	for (i=0; i<len; i++) {
+	for (i = 0; i < len; i++) {
 		writeb(buf[i], this->IO_ADDR_W);
 		au_sync();
 	}
@@ -176,7 +174,7 @@ static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	int i;
 	struct nand_chip *this = mtd->priv;
 
-	for (i=0; i<len; i++) {
+	for (i = 0; i < len; i++) {
 		buf[i] = readb(this->IO_ADDR_R);
 		au_sync();
 	}
@@ -195,7 +193,7 @@ static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
 	int i;
 	struct nand_chip *this = mtd->priv;
 
-	for (i=0; i<len; i++) {
+	for (i = 0; i < len; i++) {
 		if (buf[i] != readb(this->IO_ADDR_R))
 			return -EFAULT;
 		au_sync();
@@ -219,7 +217,7 @@ static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 	u16 *p = (u16 *) buf;
 	len >>= 1;
 
-	for (i=0; i<len; i++) {
+	for (i = 0; i < len; i++) {
 		writew(p[i], this->IO_ADDR_W);
 		au_sync();
 	}
@@ -241,7 +239,7 @@ static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 	u16 *p = (u16 *) buf;
 	len >>= 1;
 
-	for (i=0; i<len; i++) {
+	for (i = 0; i < len; i++) {
 		p[i] = readw(this->IO_ADDR_R);
 		au_sync();
 	}
@@ -262,7 +260,7 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 	u16 *p = (u16 *) buf;
 	len >>= 1;
 
-	for (i=0; i<len; i++) {
+	for (i = 0; i < len; i++) {
 		if (p[i] != readw(this->IO_ADDR_R))
 			return -EFAULT;
 		au_sync();
@@ -275,27 +273,35 @@ static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
 {
 	register struct nand_chip *this = mtd->priv;
 
-	switch(cmd){
+	switch (cmd) {
+
+	case NAND_CTL_SETCLE:
+		this->IO_ADDR_W = p_nand + MEM_STNAND_CMD;
+		break;
+
+	case NAND_CTL_CLRCLE:
+		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
+		break;
 
-	case NAND_CTL_SETCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; break;
-	case NAND_CTL_CLRCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; break;
+	case NAND_CTL_SETALE:
+		this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR;
+		break;
 
-	case NAND_CTL_SETALE: this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; break;
 	case NAND_CTL_CLRALE:
 		this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
-		/* FIXME: Nobody knows why this is neccecary,
+		/* FIXME: Nobody knows why this is necessary,
 		 * but it works only that way */
 		udelay(1);
 		break;
 
 	case NAND_CTL_SETNCE:
 		/* assert (force assert) chip enable */
-		au_writel((1<<(4+NAND_CS)) , MEM_STNDCTL); break;
+		au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL);
 		break;
 
 	case NAND_CTL_CLRNCE:
- 		/* deassert chip enable */
-		au_writel(0, MEM_STNDCTL); break;
+		/* deassert chip enable */
+		au_writel(0, MEM_STNDCTL);
 		break;
 	}
 
@@ -315,66 +321,63 @@ int au1550_device_ready(struct mtd_info *mtd)
 /*
  * Main initialization routine
  */
-int __init au1xxx_nand_init (void)
+int __init au1xxx_nand_init(void)
 {
 	struct nand_chip *this;
-	u16 boot_swapboot = 0; /* default value */
+	u16 boot_swapboot = 0;	/* default value */
 	int retval;
 	u32 mem_staddr;
 	u32 nand_phys;
 
 	/* Allocate memory for MTD device structure and private data */
-	au1550_mtd = kmalloc (sizeof(struct mtd_info) +
-			sizeof (struct nand_chip), GFP_KERNEL);
+	au1550_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
 	if (!au1550_mtd) {
-		printk ("Unable to allocate NAND MTD dev structure.\n");
+		printk("Unable to allocate NAND MTD dev structure.\n");
 		return -ENOMEM;
 	}
 
 	/* Get pointer to private data */
-	this = (struct nand_chip *) (&au1550_mtd[1]);
+	this = (struct nand_chip *)(&au1550_mtd[1]);
 
 	/* Initialize structures */
-	memset((char *) au1550_mtd, 0, sizeof(struct mtd_info));
-	memset((char *) this, 0, sizeof(struct nand_chip));
+	memset(au1550_mtd, 0, sizeof(struct mtd_info));
+	memset(this, 0, sizeof(struct nand_chip));
 
 	/* Link the private data with the MTD structure */
 	au1550_mtd->priv = this;
 
-
 	/* disable interrupts */
-	au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
+	au_writel(au_readl(MEM_STNDCTL) & ~(1 << 8), MEM_STNDCTL);
 
 	/* disable NAND boot */
-	au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
+	au_writel(au_readl(MEM_STNDCTL) & ~(1 << 0), MEM_STNDCTL);
 
 #ifdef CONFIG_MIPS_PB1550
 	/* set gpio206 high */
-	au_writel(au_readl(GPIO2_DIR) & ~(1<<6), GPIO2_DIR);
+	au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
 
-	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) |
-		((bcsr->status >> 6)  & 0x1);
+	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
 	switch (boot_swapboot) {
-		case 0:
-		case 2:
-		case 8:
-		case 0xC:
-		case 0xD:
-			/* x16 NAND Flash */
-			nand_width = 0;
-			break;
-		case 1:
-		case 9:
-		case 3:
-		case 0xE:
-		case 0xF:
-			/* x8 NAND Flash */
-			nand_width = 1;
-			break;
-		default:
-			printk("Pb1550 NAND: bad boot:swap\n");
-			retval = -EINVAL;
-			goto outmem;
+	case 0:
+	case 2:
+	case 8:
+	case 0xC:
+	case 0xD:
+		/* x16 NAND Flash */
+		nand_width = 0;
+		break;
+	case 1:
+	case 9:
+	case 3:
+	case 0xE:
+	case 0xF:
+		/* x8 NAND Flash */
+		nand_width = 1;
+		break;
+	default:
+		printk("Pb1550 NAND: bad boot:swap\n");
+		retval = -EINVAL;
+		goto outmem;
 	}
 #endif
 
@@ -424,14 +427,13 @@ int __init au1xxx_nand_init (void)
 
 	/* make controller and MTD agree */
 	if (NAND_CS == 0)
-		nand_width = au_readl(MEM_STCFG0) & (1<<22);
+		nand_width = au_readl(MEM_STCFG0) & (1 << 22);
 	if (NAND_CS == 1)
-		nand_width = au_readl(MEM_STCFG1) & (1<<22);
+		nand_width = au_readl(MEM_STCFG1) & (1 << 22);
 	if (NAND_CS == 2)
-		nand_width = au_readl(MEM_STCFG2) & (1<<22);
+		nand_width = au_readl(MEM_STCFG2) & (1 << 22);
 	if (NAND_CS == 3)
-		nand_width = au_readl(MEM_STCFG3) & (1<<22);
-
+		nand_width = au_readl(MEM_STCFG3) & (1 << 22);
 
 	/* Set address of hardware control function */
 	this->hwcontrol = au1550_hwcontrol;
@@ -454,7 +456,7 @@ int __init au1xxx_nand_init (void)
 	this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
 
 	/* Scan to find existence of the device */
-	if (nand_scan (au1550_mtd, 1)) {
+	if (nand_scan(au1550_mtd, 1)) {
 		retval = -ENXIO;
 		goto outio;
 	}
@@ -465,10 +467,10 @@ int __init au1xxx_nand_init (void)
 	return 0;
 
  outio:
-	iounmap ((void *)p_nand);
+	iounmap((void *)p_nand);
 
  outmem:
-	kfree (au1550_mtd);
+	kfree(au1550_mtd);
 	return retval;
 }
 
@@ -478,19 +480,20 @@ module_init(au1xxx_nand_init);
  * Clean up routine
  */
 #ifdef MODULE
-static void __exit au1550_cleanup (void)
+static void __exit au1550_cleanup(void)
 {
-	struct nand_chip *this = (struct nand_chip *) &au1550_mtd[1];
+	struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
 
 	/* Release resources, unregister device */
-	nand_release (au1550_mtd);
+	nand_release(au1550_mtd);
 
 	/* Free the MTD device structure */
-	kfree (au1550_mtd);
+	kfree(au1550_mtd);
 
 	/* Unmap */
-	iounmap ((void *)p_nand);
+	iounmap((void *)p_nand);
 }
+
 module_exit(au1550_cleanup);
 #endif