diff options
| author | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2015-02-10 19:59:57 +0100 |
|---|---|---|
| committer | Brian Norris <computersforpeace@gmail.com> | 2015-03-11 23:20:29 +0100 |
| commit | 3f410690f511f9531fdc0865a931522b049d7b29 (patch) | |
| tree | 85ec5c38dab6ea75421ec1109c3d18a01e6b8dd2 /drivers/mtd | |
| parent | mtd: mxc-nand: Only enable hardware checksumming for fully detected flashes (diff) | |
| download | linux-3f410690f511f9531fdc0865a931522b049d7b29.tar.xz linux-3f410690f511f9531fdc0865a931522b049d7b29.zip | |
mtd: mxc-nand: Do the word to byte mangling in the read_byte callback
When the hardware operates in 16 bit mode it always reads 16 bits even
for operations that only have the lower 8 bits defined. So the upper
bits must be discarded. Do this in the read_byte callback instead of
when reading the NAND id to support reading byte wise more than 5 bytes
and at other occations (like reading the ONFI parameter page).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 34 |
1 files changed, 10 insertions, 24 deletions
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index d9637ae34719..aa98a0dddcfb 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -552,30 +552,17 @@ static void send_page_v1(struct mtd_info *mtd, unsigned int ops) static void send_read_id_v3(struct mxc_nand_host *host) { - struct nand_chip *this = &host->nand; - /* Read ID into main buffer */ writel(NFC_ID, NFC_V3_LAUNCH); wait_op_done(host, true); memcpy32_fromio(host->data_buf, host->main_area0, 16); - - if (this->options & NAND_BUSWIDTH_16) { - /* compress the ID info */ - host->data_buf[1] = host->data_buf[2]; - host->data_buf[2] = host->data_buf[4]; - host->data_buf[3] = host->data_buf[6]; - host->data_buf[4] = host->data_buf[8]; - host->data_buf[5] = host->data_buf[10]; - } } /* Request the NANDFC to perform a read of the NAND device ID. */ static void send_read_id_v1_v2(struct mxc_nand_host *host) { - struct nand_chip *this = &host->nand; - /* NANDFC buffer 0 is used for device ID output */ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR); @@ -585,15 +572,6 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host) wait_op_done(host, true); memcpy32_fromio(host->data_buf, host->main_area0, 16); - - if (this->options & NAND_BUSWIDTH_16) { - /* compress the ID info */ - host->data_buf[1] = host->data_buf[2]; - host->data_buf[2] = host->data_buf[4]; - host->data_buf[3] = host->data_buf[6]; - host->data_buf[4] = host->data_buf[8]; - host->data_buf[5] = host->data_buf[10]; - } } static uint16_t get_dev_status_v3(struct mxc_nand_host *host) @@ -719,9 +697,17 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd) if (host->status_request) return host->devtype_data->get_dev_status(host) & 0xFF; - ret = *(uint8_t *)(host->data_buf + host->buf_start); - host->buf_start++; + if (nand_chip->options & NAND_BUSWIDTH_16) { + /* only take the lower byte of each word */ + ret = *(uint16_t *)(host->data_buf + host->buf_start); + + host->buf_start += 2; + } else { + ret = *(uint8_t *)(host->data_buf + host->buf_start); + host->buf_start++; + } + pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start); return ret; } |