Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...

1 files changed, 1 insertions, 22 deletions

diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 5551c36adbdf..0d06a1f07d82 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -25,7 +25,6 @@
 
 #include <linux/gpio.h>
 
-#include <asm/mach-jz4740/gpio.h>
 #include <asm/mach-jz4740/jz4740_nand.h>
 
 #define JZ_REG_NAND_CTRL	0x50
@@ -310,34 +309,20 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
 			       uint8_t *nand_dev_id)
 {
 	int ret;
-	int gpio;
-	char gpio_name[9];
 	char res_name[6];
 	uint32_t ctrl;
 	struct nand_chip *chip = &nand->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 
-	/* Request GPIO port. */
-	gpio = JZ_GPIO_MEM_CS0 + bank - 1;
-	sprintf(gpio_name, "NAND CS%d", bank);
-	ret = gpio_request(gpio, gpio_name);
-	if (ret) {
-		dev_warn(&pdev->dev,
-			"Failed to request %s gpio %d: %d\n",
-			gpio_name, gpio, ret);
-		goto notfound_gpio;
-	}
-
 	/* Request I/O resource. */
 	sprintf(res_name, "bank%d", bank);
 	ret = jz_nand_ioremap_resource(pdev, res_name,
 					&nand->bank_mem[bank - 1],
 					&nand->bank_base[bank - 1]);
 	if (ret)
-		goto notfound_resource;
+		return ret;
 
 	/* Enable chip in bank. */
-	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
 	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
 	ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
 	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
@@ -377,12 +362,8 @@ notfound_id:
 	dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
 	ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
 	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
-	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
 	jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
 				 nand->bank_base[bank - 1]);
-notfound_resource:
-	gpio_free(gpio);
-notfound_gpio:
 	return ret;
 }
 
@@ -503,7 +484,6 @@ err_nand_release:
 err_unclaim_banks:
 	while (chipnr--) {
 		unsigned char bank = nand->banks[chipnr];
-		gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
 		jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
 					 nand->bank_base[bank - 1]);
 	}
@@ -530,7 +510,6 @@ static int jz_nand_remove(struct platform_device *pdev)
 		if (bank != 0) {
 			jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
 						 nand->bank_base[bank - 1]);
-			gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
 		}
 	}