Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (79 commits) mtd: Remove obsolete <mtd/compatmac.h> include mtd: Update copyright notices jffs2: Update copyright notices mtd-physmap: add support users can assign the probe type in board files mtd: remove redwood map driver mxc_nand: Add v3 (i.MX51) Support mxc_nand: support 8bit ecc mxc_nand: fix correct_data function mxc_nand: add V1_V2 namespace to registers mxc_nand: factor out a check_int function mxc_nand: make some internally used functions overwriteable mxc_nand: rework get_dev_status mxc_nand: remove 0xe00 offset from registers mtd: denali: Add multi connected NAND support mtd: denali: Remove set_ecc_config function mtd: denali: Remove unuseful code in get_xx_nand_para functions mtd: denali: Remove device_info_tag structure mtd: m25p80: add support for the Winbond W25Q32 SPI flash chip mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chips ... Fix up trivial conflicts in drivers/mtd/maps/{Kconfig,redwood.c} due to redwood driver removal.
author: Linus Torvalds <torvalds@linux-foundation.org> 2010-08-10 20:49:21 +0200
committer: Linus Torvalds <torvalds@linux-foundation.org> 2010-08-10 20:49:21 +0200
commit: e8a89cebdbaab14caaa26debdb4ffd493b8831af (patch)
tree: e0843f082628408ce259c72db36da54dff603987 /drivers/mtd
parent: Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bco... (diff)
parent: mtd: Remove obsolete <mtd/compatmac.h> include (diff)
download: linux-e8a89cebdbaab14caaa26debdb4ffd493b8831af.tar.xz
linux-e8a89cebdbaab14caaa26debdb4ffd493b8831af.zip
66 files changed, 1642 insertions, 1472 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index f8210bf2d241..1e2cbf5d9aa1 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -311,15 +311,17 @@ config SM_FTL
 	select MTD_BLKDEVS
 	select MTD_NAND_ECC
 	help
-	  This enables new and very EXPERMENTAL support for SmartMedia/xD
+	  This enables EXPERIMENTAL R/W support for SmartMedia/xD
 	  FTL (Flash translation layer).
-	  Write support isn't yet well tested, therefore this code IS likely to
-	  eat your card, so please don't use it together with valuable data.
-	  Use readonly driver (CONFIG_SSFDC) instead.
+	  Write support is only lightly tested, therefore this driver
+	  isn't recommended to use with valuable data (anyway if you have
+	  valuable data, do backups regardless of software/hardware you
+	  use, because you never know what will eat your data...)
+	  If you only need R/O access, you can use older R/O driver
+	  (CONFIG_SSFDC)
 
 config MTD_OOPS
 	tristate "Log panic/oops to an MTD buffer"
-	depends on MTD
 	help
 	  This enables panic and oops messages to be logged to a circular
 	  buffer in a flash partition where it can be read back at some
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index cec7ab98b2a9..302372c08b56 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -2,7 +2,7 @@
 
     drivers/mtd/afs.c: ARM Flash Layout/Partitioning
 
-    Copyright (C) 2000 ARM Limited
+    Copyright © 2000 ARM Limited
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 62f3ea9de848..9e2b7e9e0ad9 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -34,7 +34,6 @@
 #include <linux/mtd/xip.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/cfi.h>
 
 /* #define CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE */
@@ -63,6 +62,8 @@ static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *);
 static void cfi_intelext_sync (struct mtd_info *);
 static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+				  uint64_t len);
 #ifdef CONFIG_MTD_OTP
 static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -448,6 +449,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
 	mtd->sync    = cfi_intelext_sync;
 	mtd->lock    = cfi_intelext_lock;
 	mtd->unlock  = cfi_intelext_unlock;
+	mtd->is_locked = cfi_intelext_is_locked;
 	mtd->suspend = cfi_intelext_suspend;
 	mtd->resume  = cfi_intelext_resume;
 	mtd->flags   = MTD_CAP_NORFLASH;
@@ -717,7 +719,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 		chip = &newcfi->chips[0];
 		for (i = 0; i < cfi->numchips; i++) {
 			shared[i].writing = shared[i].erasing = NULL;
-			spin_lock_init(&shared[i].lock);
+			mutex_init(&shared[i].lock);
 			for (j = 0; j < numparts; j++) {
 				*chip = cfi->chips[i];
 				chip->start += j << partshift;
@@ -886,7 +888,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		 */
 		struct flchip_shared *shared = chip->priv;
 		struct flchip *contender;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		contender = shared->writing;
 		if (contender && contender != chip) {
 			/*
@@ -899,7 +901,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 			 * get_chip returns success we're clear to go ahead.
 			 */
 			ret = mutex_trylock(&contender->mutex);
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			if (!ret)
 				goto retry;
 			mutex_unlock(&chip->mutex);
@@ -914,7 +916,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 				mutex_unlock(&contender->mutex);
 				return ret;
 			}
-			spin_lock(&shared->lock);
+			mutex_lock(&shared->lock);
 
 			/* We should not own chip if it is already
 			 * in FL_SYNCING state. Put contender and retry. */
@@ -930,7 +932,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		 * on this chip. Sleep. */
 		if (mode == FL_ERASING && shared->erasing
 		    && shared->erasing->oldstate == FL_ERASING) {
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
 			mutex_unlock(&chip->mutex);
@@ -944,7 +946,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		shared->writing = chip;
 		if (mode == FL_ERASING)
 			shared->erasing = chip;
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 	ret = chip_ready(map, chip, adr, mode);
 	if (ret == -EAGAIN)
@@ -959,7 +961,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 
 	if (chip->priv) {
 		struct flchip_shared *shared = chip->priv;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		if (shared->writing == chip && chip->oldstate == FL_READY) {
 			/* We own the ability to write, but we're done */
 			shared->writing = shared->erasing;
@@ -967,7 +969,7 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 				/* give back ownership to who we loaned it from */
 				struct flchip *loaner = shared->writing;
 				mutex_lock(&loaner->mutex);
-				spin_unlock(&shared->lock);
+				mutex_unlock(&shared->lock);
 				mutex_unlock(&chip->mutex);
 				put_chip(map, loaner, loaner->start);
 				mutex_lock(&chip->mutex);
@@ -985,11 +987,11 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 			 * Don't let the switch below mess things up since
 			 * we don't have ownership to resume anything.
 			 */
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			wake_up(&chip->wq);
 			return;
 		}
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 
 	switch(chip->oldstate) {
@@ -2139,6 +2141,13 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	return ret;
 }
 
+static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs,
+				  uint64_t len)
+{
+	return cfi_varsize_frob(mtd, do_getlockstatus_oneblock,
+				ofs, len, NULL) ? 1 : 0;
+}
+
 #ifdef CONFIG_MTD_OTP
 
 typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip,
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index d81079ef91a5..3e6c47bdce53 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -33,7 +33,6 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/cfi.h>
@@ -417,16 +416,26 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
 			 */
 			cfi_fixup_major_minor(cfi, extp);
 
+			/*
+			 * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
+			 * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
+			 *      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
+			 *      http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
+			 */
 			if (extp->MajorVersion != '1' ||
-			    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+			    (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '4'))) {
 				printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
-				       "version %c.%c.\n",  extp->MajorVersion,
-				       extp->MinorVersion);
+				       "version %c.%c (%#02x/%#02x).\n",
+				       extp->MajorVersion, extp->MinorVersion,
+				       extp->MajorVersion, extp->MinorVersion);
 				kfree(extp);
 				kfree(mtd);
 				return NULL;
 			}
 
+			printk(KERN_INFO "  Amd/Fujitsu Extended Query version %c.%c.\n",
+			       extp->MajorVersion, extp->MinorVersion);
+
 			/* Install our own private info structure */
 			cfi->cmdset_priv = extp;
 
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index e54e8c169d76..314af1f5a370 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -33,7 +33,6 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/cfi.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
 
 
 static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index b2acd32f4fbf..8f5b96aa87a0 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -235,9 +235,9 @@ static int __xipram cfi_chip_setup(struct map_info *map,
 	cfi_qry_mode_off(base, map, cfi);
 	xip_allowed(base, map);
 
-	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
+	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
 	       map->name, cfi->interleave, cfi->device_type*8, base,
-	       map->bankwidth*8);
+	       map->bankwidth*8, cfi->mfr, cfi->id);
 
 	return 1;
 }
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index d7c2c672757e..e503b2ca894d 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -22,7 +22,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/cfi.h>
-#include <linux/mtd/compatmac.h>
 
 int __xipram cfi_qry_present(struct map_info *map, __u32 base,
 			     struct cfi_private *cfi)
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index c85760968227..da1f96f385c7 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -10,7 +10,6 @@
 #include <linux/slab.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
 
 static DEFINE_SPINLOCK(chip_drvs_lock);
 static LIST_HEAD(chip_drvs_list);
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
index 494d30d0631a..f2b872946871 100644
--- a/drivers/mtd/chips/map_absent.c
+++ b/drivers/mtd/chips/map_absent.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
 
 static int map_absent_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int map_absent_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index 6bdc50c727e7..67640ccb2d41 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
 
 
 static int mapram_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index 076090a67b90..593f73d480d2 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
-#include <linux/mtd/compatmac.h>
 
 static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 1479da6d3aa6..e790f38893b0 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,7 +1,22 @@
 /*
  * Read flash partition table from command line
  *
- * Copyright 2002 SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002      SYSGO Real-Time Solutions GmbH
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  * The format for the command line is as follows:
  *
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index a19cda52da5c..a99838bb2dc0 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -31,7 +31,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 
-#include <linux/mtd/compatmac.h> /* for min() in older kernels */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/doc2000.h>
 
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 6e62922942b1..d374603493a7 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -49,7 +49,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
 
 /* Where to look for the devices? */
 #ifndef CONFIG_MTD_DOCPROBE_ADDRESS
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 81e49a9b017e..f90941a785e4 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -16,6 +16,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/err.h>
+#include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
@@ -639,8 +641,18 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
 	{ "at26df321",  INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
 
+	/* EON -- en25pxx */
+	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
+	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+
+	/* Intel/Numonyx -- xxxs33b */
+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
+
 	/* Macronix */
 	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
@@ -680,6 +692,16 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
 	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
 
+	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
+	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
+	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
+	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
+	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
+	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
+	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
+	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
+	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
+
 	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
 	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
 	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
@@ -694,6 +716,7 @@ static const struct spi_device_id m25p_ids[] = {
 	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
+	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
 
 	/* Catalyst / On Semiconductor -- non-JEDEC */
@@ -723,7 +746,7 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
 	if (tmp < 0) {
 		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
 			dev_name(&spi->dev), tmp);
-		return NULL;
+		return ERR_PTR(tmp);
 	}
 	jedec = id[0];
 	jedec = jedec << 8;
@@ -731,14 +754,6 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
 	jedec = jedec << 8;
 	jedec |= id[2];
 
-	/*
-	 * Some chips (like Numonyx M25P80) have JEDEC and non-JEDEC variants,
-	 * which depend on technology process. Officially RDID command doesn't
-	 * exist for non-JEDEC chips, but for compatibility they return ID 0.
-	 */
-	if (jedec == 0)
-		return NULL;
-
 	ext_jedec = id[3] << 8 | id[4];
 
 	for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) {
@@ -749,7 +764,7 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi)
 			return &m25p_ids[tmp];
 		}
 	}
-	return NULL;
+	return ERR_PTR(-ENODEV);
 }
 
 
@@ -794,9 +809,8 @@ static int __devinit m25p_probe(struct spi_device *spi)
 		const struct spi_device_id *jid;
 
 		jid = jedec_probe(spi);
-		if (!jid) {
-			dev_info(&spi->dev, "non-JEDEC variant of %s\n",
-				 id->name);
+		if (IS_ERR(jid)) {
+			return PTR_ERR(jid);
 		} else if (jid != id) {
 			/*
 			 * JEDEC knows better, so overwrite platform ID. We
@@ -826,11 +840,12 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	dev_set_drvdata(&spi->dev, flash);
 
 	/*
-	 * Atmel and SST serial flash tend to power
+	 * Atmel, SST and Intel/Numonyx serial flash tend to power
 	 * up with the software protection bits set
 	 */
 
 	if (info->jedec_id >> 16 == 0x1f ||
+	    info->jedec_id >> 16 == 0x89 ||
 	    info->jedec_id >> 16 == 0xbf) {
 		write_enable(flash);
 		write_sr(flash, 0);
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 19817404ce7d..c5015cc721d5 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -141,7 +141,7 @@ static int dataflash_waitready(struct spi_device *spi)
  */
 static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	struct spi_device	*spi = priv->spi;
 	struct spi_transfer	x = { .tx_dma = 0, };
 	struct spi_message	msg;
@@ -231,7 +231,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 			       size_t *retlen, u_char *buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	struct spi_transfer	x[2] = { { .tx_dma = 0, }, };
 	struct spi_message	msg;
 	unsigned int		addr;
@@ -304,7 +304,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 				size_t * retlen, const u_char * buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	struct spi_device	*spi = priv->spi;
 	struct spi_transfer	x[2] = { { .tx_dma = 0, }, };
 	struct spi_message	msg;
@@ -515,7 +515,7 @@ static ssize_t otp_read(struct spi_device *spi, unsigned base,
 static int dataflash_read_fact_otp(struct mtd_info *mtd,
 		loff_t from, size_t len, size_t *retlen, u_char *buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	int			status;
 
 	/* 64 bytes, from 0..63 ... start at 64 on-chip */
@@ -532,7 +532,7 @@ static int dataflash_read_fact_otp(struct mtd_info *mtd,
 static int dataflash_read_user_otp(struct mtd_info *mtd,
 		loff_t from, size_t len, size_t *retlen, u_char *buf)
 {
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	int			status;
 
 	/* 64 bytes, from 0..63 ... start at 0 on-chip */
@@ -553,7 +553,7 @@ static int dataflash_write_user_otp(struct mtd_info *mtd,
 	const size_t		l = 4 + 64;
 	uint8_t			*scratch;
 	struct spi_transfer	t;
-	struct dataflash	*priv = (struct dataflash *)mtd->priv;
+	struct dataflash	*priv = mtd->priv;
 	int			status;
 
 	if (len > 64)
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index fce5ff7589aa..26a6e809013d 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -14,7 +14,6 @@
 #include <linux/ioport.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/mtdram.h>
 
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index fc8ea0a57ac2..ef0aba0ce58f 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -98,7 +98,6 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/pmc551.h>
-#include <linux/mtd/compatmac.h>
 
 static struct mtd_info *pmc551list;
 
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index ab5d8cd02a15..684247a8a5ed 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -454,7 +454,7 @@ static int __init sst25l_probe(struct spi_device *spi)
 						  parts, nr_parts);
 		}
 
-	} else if (data->nr_parts) {
+	} else if (data && data->nr_parts) {
 		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
 			 data->nr_parts, data->name);
 	}
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 62da9eb7032b..4d6a64c387ec 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -26,7 +26,7 @@
 
     The initial developer of the original code is David A. Hinds
     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+    are Copyright © 1999 David A. Hinds.  All Rights Reserved.
 
     Alternatively, the contents of this file may be used under the
     terms of the GNU General Public License version 2 (the "GPL"), in
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index 015a7fe1b6ee..d7592e67d048 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -1,11 +1,11 @@
 /*
  * inftlcore.c -- Linux driver for Inverse Flash Translation Layer (INFTL)
  *
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002, Greg Ungerer (gerg@snapgear.com)
  *
  * Based heavily on the nftlcore.c code which is:
- * (c) 1999 Machine Vision Holdings, Inc.
- * Author: David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999 David Woodhouse <dwmw2@infradead.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index 8f988d7d3c5c..104052e774b0 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -2,11 +2,11 @@
  * inftlmount.c -- INFTL mount code with extensive checks.
  *
  * Author: Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2002-2003, Greg Ungerer (gerg@snapgear.com)
+ * Copyright © 2002-2003, Greg Ungerer (gerg@snapgear.com)
  *
  * Based heavily on the nftlmount.c code which is:
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -34,7 +34,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nftl.h>
 #include <linux/mtd/inftl.h>
-#include <linux/mtd/compatmac.h>
 
 /*
  * find_boot_record: Find the INFTL Media Header and its Spare copy which
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index fece5be58715..04fdfcca93f7 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -98,7 +98,7 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 	numchips = lpddr->numchips / lpddr->qinfo->HWPartsNum;
 	for (i = 0; i < numchips; i++) {
 		shared[i].writing = shared[i].erasing = NULL;
-		spin_lock_init(&shared[i].lock);
+		mutex_init(&shared[i].lock);
 		for (j = 0; j < lpddr->qinfo->HWPartsNum; j++) {
 			*chip = lpddr->chips[i];
 			chip->start += j << lpddr->chipshift;
@@ -217,7 +217,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 		 */
 		struct flchip_shared *shared = chip->priv;
 		struct flchip *contender;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		contender = shared->writing;
 		if (contender && contender != chip) {
 			/*
@@ -230,7 +230,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 			 * get_chip returns success we're clear to go ahead.
 			 */
 			ret = mutex_trylock(&contender->mutex);
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			if (!ret)
 				goto retry;
 			mutex_unlock(&chip->mutex);
@@ -245,7 +245,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 				mutex_unlock(&contender->mutex);
 				return ret;
 			}
-			spin_lock(&shared->lock);
+			mutex_lock(&shared->lock);
 
 			/* We should not own chip if it is already in FL_SYNCING
 			 * state. Put contender and retry. */
@@ -261,7 +261,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 		   Must sleep in such a case. */
 		if (mode == FL_ERASING && shared->erasing
 		    && shared->erasing->oldstate == FL_ERASING) {
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&chip->wq, &wait);
 			mutex_unlock(&chip->mutex);
@@ -275,7 +275,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, int mode)
 		shared->writing = chip;
 		if (mode == FL_ERASING)
 			shared->erasing = chip;
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 
 	ret = chip_ready(map, chip, mode);
@@ -348,7 +348,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
 {
 	if (chip->priv) {
 		struct flchip_shared *shared = chip->priv;
-		spin_lock(&shared->lock);
+		mutex_lock(&shared->lock);
 		if (shared->writing == chip && chip->oldstate == FL_READY) {
 			/* We own the ability to write, but we're done */
 			shared->writing = shared->erasing;
@@ -356,7 +356,7 @@ static void put_chip(struct map_info *map, struct flchip *chip)
 				/* give back the ownership */
 				struct flchip *loaner = shared->writing;
 				mutex_lock(&loaner->mutex);
-				spin_unlock(&shared->lock);
+				mutex_unlock(&shared->lock);
 				mutex_unlock(&chip->mutex);
 				put_chip(map, loaner);
 				mutex_lock(&chip->mutex);
@@ -374,11 +374,11 @@ static void put_chip(struct map_info *map, struct flchip *chip)
 			 * Don't let the switch below mess things up since
 			 * we don't have ownership to resume anything.
 			 */
-			spin_unlock(&shared->lock);
+			mutex_unlock(&shared->lock);
 			wake_up(&chip->wq);
 			return;
 		}
-		spin_unlock(&shared->lock);
+		mutex_unlock(&shared->lock);
 	}
 
 	switch (chip->oldstate) {
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 6629d09f3b38..701d942c6795 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -319,14 +319,6 @@ config MTD_CFI_FLAGADM
 	  Mapping for the Flaga digital module. If you don't have one, ignore
 	  this setting.
 
-config MTD_REDWOOD
-	tristate "CFI Flash devices mapped on IBM Redwood"
-	depends on MTD_CFI
-	help
-	  This enables access routines for the flash chips on the IBM
-	  Redwood board. If you have one of these boards and would like to
-	  use the flash chips on it, say 'Y'.
-
 config MTD_SOLUTIONENGINE
 	tristate "CFI Flash device mapped on Hitachi SolutionEngine"
 	depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index bb035cd54c72..f216bb573713 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
 obj-$(CONFIG_MTD_FORTUNET)	+= fortunet.o
-obj-$(CONFIG_MTD_REDWOOD)	+= redwood.o
 obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
 obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index e0a5e0426ead..1f9fde0dad35 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -118,7 +118,7 @@ static void ixp4xx_copy_from(struct map_info *map, void *to,
 		*dest++ = BYTE1(data);
 		src += 2;
 		len -= 2;
-        }
+	}
 
 	if (len > 0)
 		*dest++ = BYTE0(flash_read16(src));
@@ -185,6 +185,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 {
 	struct flash_platform_data *plat = dev->dev.platform_data;
 	struct ixp4xx_flash_info *info;
+	const char *part_type = NULL;
+	int nr_parts = 0;
 	int err = -1;
 
 	if (!plat)
@@ -218,9 +220,9 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	 */
 	info->map.bankwidth = 2;
 	info->map.name = dev_name(&dev->dev);
-	info->map.read = ixp4xx_read16,
-	info->map.write = ixp4xx_probe_write16,
-	info->map.copy_from = ixp4xx_copy_from,
+	info->map.read = ixp4xx_read16;
+	info->map.write = ixp4xx_probe_write16;
+	info->map.copy_from = ixp4xx_copy_from;
 
 	info->res = request_mem_region(dev->resource->start,
 			resource_size(dev->resource),
@@ -248,11 +250,28 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
 	info->mtd->owner = THIS_MODULE;
 
 	/* Use the fast version */
-	info->map.write = ixp4xx_write16,
+	info->map.write = ixp4xx_write16;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions,
+					dev->resource->start);
+#endif
+	if (nr_parts > 0) {
+		part_type = "dynamic";
+	} else {
+		info->partitions = plat->parts;
+		nr_parts = plat->nr_parts;
+		part_type = "static";
+	}
+	if (nr_parts == 0) {
+		printk(KERN_NOTICE "IXP4xx flash: no partition info "
+			"available, registering whole flash\n");
+		err = add_mtd_device(info->mtd);
+	} else {
+		printk(KERN_NOTICE "IXP4xx flash: using %s partition "
+			"definition\n", part_type);
+		err = add_mtd_partitions(info->mtd, info->partitions, nr_parts);
 
-	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->partitions, err);
 		if(err)
 			printk(KERN_ERR "Could not parse partitions\n");
 	}
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 426461a5f0d4..4c18b98a3110 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -106,12 +106,12 @@ static int physmap_flash_probe(struct platform_device *dev)
 
 	for (i = 0; i < dev->num_resources; i++) {
 		printk(KERN_NOTICE "physmap platform flash device: %.8llx at %.8llx\n",
-		       (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
+		       (unsigned long long)resource_size(&dev->resource[i]),
 		       (unsigned long long)dev->resource[i].start);
 
 		if (!devm_request_mem_region(&dev->dev,
 			dev->resource[i].start,
-			dev->resource[i].end - dev->resource[i].start + 1,
+			resource_size(&dev->resource[i]),
 			dev_name(&dev->dev))) {
 			dev_err(&dev->dev, "Could not reserve memory region\n");
 			err = -ENOMEM;
@@ -120,7 +120,7 @@ static int physmap_flash_probe(struct platform_device *dev)
 
 		info->map[i].name = dev_name(&dev->dev);
 		info->map[i].phys = dev->resource[i].start;
-		info->map[i].size = dev->resource[i].end - dev->resource[i].start + 1;
+		info->map[i].size = resource_size(&dev->resource[i]);
 		info->map[i].bankwidth = physmap_data->width;
 		info->map[i].set_vpp = physmap_data->set_vpp;
 		info->map[i].pfow_base = physmap_data->pfow_base;
@@ -136,8 +136,12 @@ static int physmap_flash_probe(struct platform_device *dev)
 		simple_map_init(&info->map[i]);
 
 		probe_type = rom_probe_types;
-		for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
-			info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+		if (physmap_data->probe_type == NULL) {
+			for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+				info->mtd[i] = do_map_probe(*probe_type, &info->map[i]);
+		} else
+			info->mtd[i] = do_map_probe(physmap_data->probe_type, &info->map[i]);
+
 		if (info->mtd[i] == NULL) {
 			dev_err(&dev->dev, "map_probe failed\n");
 			err = -ENXIO;
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index ba124baa646d..6ac5f9f28ac3 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -353,7 +353,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 				   &info->parts, 0);
 	if (err < 0) {
 		of_free_probes(part_probe_types);
-		return err;
+		goto err_out;
 	}
 	of_free_probes(part_probe_types);
 
@@ -361,14 +361,14 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	if (err == 0) {
 		err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts);
 		if (err < 0)
-			return err;
+			goto err_out;
 	}
 #endif
 
 	if (err == 0) {
 		err = parse_obsolete_partitions(dev, info, dp);
 		if (err < 0)
-			return err;
+			goto err_out;
 	}
 
 	if (err > 0)
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
deleted file mode 100644
index d2c9db00db0c..000000000000
--- a/drivers/mtd/maps/redwood.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * drivers/mtd/maps/redwood.c
- *
- * FLASH map for the IBM Redwood 4/5/6 boards.
- *
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#define WINDOW_ADDR 0xffc00000
-#define WINDOW_SIZE 0x00400000
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x10000
-#define RW_PART1_OF	RW_PART0_SZ
-#define RW_PART1_SZ	0x200000 - 0x10000
-#define RW_PART2_OF	0x200000
-#define RW_PART2_SZ	0x10000
-#define RW_PART3_OF	0x210000
-#define RW_PART3_SZ	0x200000 - (0x10000 + 0x20000)
-#define RW_PART4_OF	0x3e0000
-#define RW_PART4_SZ	0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
-	{
-		.name = "Redwood OpenBIOS Vital Product Data",
-		.offset = RW_PART0_OF,
-		.size = RW_PART0_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name = "Redwood kernel",
-		.offset = RW_PART1_OF,
-		.size = RW_PART1_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS non-volatile storage",
-		.offset = RW_PART2_OF,
-		.size = RW_PART2_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name = "Redwood filesystem",
-		.offset = RW_PART3_OF,
-		.size = RW_PART3_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS",
-		.offset = RW_PART4_OF,
-		.size = RW_PART4_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	}
-};
-
-struct map_info redwood_flash_map = {
-	.name = "IBM Redwood",
-	.size = WINDOW_SIZE,
-	.bankwidth = 2,
-	.phys = WINDOW_ADDR,
-};
-
-
-#define NUM_REDWOOD_FLASH_PARTITIONS ARRAY_SIZE(redwood_flash_partitions)
-
-static struct mtd_info *redwood_mtd;
-
-static int __init init_redwood_flash(void)
-{
-	int err;
-
-	printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n",
-			WINDOW_SIZE, WINDOW_ADDR);
-
-	redwood_flash_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
-
-	if (!redwood_flash_map.virt) {
-		printk("init_redwood_flash: failed to ioremap\n");
-		return -EIO;
-	}
-	simple_map_init(&redwood_flash_map);
-
-	redwood_mtd = do_map_probe("cfi_probe",&redwood_flash_map);
-
-	if (redwood_mtd) {
-		redwood_mtd->owner = THIS_MODULE;
-		err = add_mtd_partitions(redwood_mtd,
-				redwood_flash_partitions,
-				NUM_REDWOOD_FLASH_PARTITIONS);
-		if (err) {
-			printk("init_redwood_flash: add_mtd_partitions failed\n");
-			iounmap(redwood_flash_map.virt);
-		}
-		return err;
-
-	}
-
-	iounmap(redwood_flash_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_redwood_flash(void)
-{
-	if (redwood_mtd) {
-		del_mtd_partitions(redwood_mtd);
-		/* moved iounmap after map_destroy - armin */
-		map_destroy(redwood_mtd);
-		iounmap((void *)redwood_flash_map.virt);
-	}
-}
-
-module_init(init_redwood_flash);
-module_exit(cleanup_redwood_flash);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("MontaVista Software <source@mvista.com>");
-MODULE_DESCRIPTION("MTD map driver for the IBM Redwood reference boards");
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 03e19c1965cc..1d2144d77470 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -1,7 +1,21 @@
 /*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
+ * Interface to Linux block layer for MTD 'translation layers'.
  *
- * Interface to Linux 2.5 block layer for MTD 'translation layers'.
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  */
 
@@ -245,6 +259,7 @@ static int blktrans_ioctl(struct block_device *bdev, fmode_t mode,
 	switch (cmd) {
 	case BLKFLSBUF:
 		ret = dev->tr->flush ? dev->tr->flush(dev) : 0;
+		break;
 	default:
 		ret = -ENOTTY;
 	}
@@ -409,13 +424,14 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 		BUG();
 	}
 
-	/* Stop new requests to arrive */
-	del_gendisk(old->disk);
-
 	if (old->disk_attributes)
 		sysfs_remove_group(&disk_to_dev(old->disk)->kobj,
 						old->disk_attributes);
 
+	/* Stop new requests to arrive */
+	del_gendisk(old->disk);
+
+
 	/* Stop the thread */
 	kthread_stop(old->thread);
 
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index e6edbec609fd..1e74ad961040 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -1,8 +1,23 @@
 /*
  * Direct MTD block device access
  *
- * (C) 2000-2003 Nicolas Pitre <nico@fluxnic.net>
- * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2000-2003 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/fs.h>
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index d0d3f79f9d03..795a8c0a05b8 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -1,7 +1,22 @@
 /*
- * (C) 2003 David Woodhouse <dwmw2@infradead.org>
- *
  * Simple read-only (writable only for RAM) mtdblock driver
+ *
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 91c8013cf0d9..a825002123c8 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,5 +1,19 @@
 /*
- * Character-device access to raw MTD devices.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
  */
 
@@ -18,7 +32,7 @@
 #include <linux/mount.h>
 
 #include <linux/mtd/mtd.h>
-#include <linux/mtd/compatmac.h>
+#include <linux/mtd/map.h>
 
 #include <asm/uaccess.h>
 
@@ -675,6 +689,20 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
 		break;
 	}
 
+	case MEMISLOCKED:
+	{
+		struct erase_info_user einfo;
+
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
+			return -EFAULT;
+
+		if (!mtd->is_locked)
+			ret = -EOPNOTSUPP;
+		else
+			ret = mtd->is_locked(mtd, einfo.start, einfo.length);
+		break;
+	}
+
 	/* Legacy interface */
 	case MEMGETOOBSEL:
 	{
@@ -950,9 +978,34 @@ static int mtd_mmap(struct file *file, struct vm_area_struct *vma)
 #ifdef CONFIG_MMU
 	struct mtd_file_info *mfi = file->private_data;
 	struct mtd_info *mtd = mfi->mtd;
+	struct map_info *map = mtd->priv;
+	unsigned long start;
+	unsigned long off;
+	u32 len;
+
+	if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) {
+		off = vma->vm_pgoff << PAGE_SHIFT;
+		start = map->phys;
+		len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size);
+		start &= PAGE_MASK;
+		if ((vma->vm_end - vma->vm_start + off) > len)
+			return -EINVAL;
+
+		off += start;
+		vma->vm_pgoff = off >> PAGE_SHIFT;
+		vma->vm_flags |= VM_IO | VM_RESERVED;
+
+#ifdef pgprot_noncached
+		if (file->f_flags & O_DSYNC || off >= __pa(high_memory))
+			vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+		if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
+				       vma->vm_end - vma->vm_start,
+				       vma->vm_page_prot))
+			return -EAGAIN;
 
-	if (mtd->type == MTD_RAM || mtd->type == MTD_ROM)
 		return 0;
+	}
 	return -ENOSYS;
 #else
 	return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 7e075621bbf4..bf8de0943103 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -1,11 +1,25 @@
 /*
  * MTD device concatenation layer
  *
- * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de>
+ * Copyright © 2002-2010 David Woodhouse <dwmw2@infradead.org>
  *
  * NAND support by Christian Gan <cgan@iders.ca>
  *
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/kernel.h>
@@ -540,10 +554,12 @@ static int concat_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		else
 			size = len;
 
-		err = subdev->lock(subdev, ofs, size);
-
-		if (err)
-			break;
+		if (subdev->lock) {
+			err = subdev->lock(subdev, ofs, size);
+			if (err)
+				break;
+		} else
+			err = -EOPNOTSUPP;
 
 		len -= size;
 		if (len == 0)
@@ -578,10 +594,12 @@ static int concat_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 		else
 			size = len;
 
-		err = subdev->unlock(subdev, ofs, size);
-
-		if (err)
-			break;
+		if (subdev->unlock) {
+			err = subdev->unlock(subdev, ofs, size);
+			if (err)
+				break;
+		} else
+			err = -EOPNOTSUPP;
 
 		len -= size;
 		if (len == 0)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index a1b8b70d2d0a..527cebf58da4 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -2,9 +2,23 @@
  * Core registration and callback routines for MTD
  * drivers and users.
  *
- * bdi bits are:
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2006      Red Hat UK Limited 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/module.h>
@@ -17,7 +31,6 @@
 #include <linux/err.h>
 #include <linux/ioctl.h>
 #include <linux/init.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/proc_fs.h>
 #include <linux/idr.h>
 #include <linux/backing-dev.h>
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 328313c3dccb..1ee72f3f0512 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -1,7 +1,7 @@
 /*
  * MTD Oops/Panic logger
  *
- * Copyright (C) 2007 Nokia Corporation. All rights reserved.
+ * Copyright © 2007 Nokia Corporation. All rights reserved.
  *
  * Author: Richard Purdie <rpurdie@openedhand.com>
  *
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index b8043a9ba32d..dc6558568876 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -1,12 +1,24 @@
 /*
  * Simple MTD partitioning layer
  *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2000 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright © 2002 Thomas Gleixner <gleixner@linutronix.de>
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
  *
- * This code is GPL
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  *
- * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
- *			added support for read_oob, write_oob
  */
 
 #include <linux/module.h>
@@ -17,7 +29,6 @@
 #include <linux/kmod.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/mtd/compatmac.h>
 
 /* Our partition linked list */
 static LIST_HEAD(mtd_partitions);
@@ -264,6 +275,14 @@ static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	return part->master->unlock(part->master, ofs + part->offset, len);
 }
 
+static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+	struct mtd_part *part = PART(mtd);
+	if ((len + ofs) > mtd->size)
+		return -EINVAL;
+	return part->master->is_locked(part->master, ofs + part->offset, len);
+}
+
 static void part_sync(struct mtd_info *mtd)
 {
 	struct mtd_part *part = PART(mtd);
@@ -402,6 +421,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		slave->mtd.lock = part_lock;
 	if (master->unlock)
 		slave->mtd.unlock = part_unlock;
+	if (master->is_locked)
+		slave->mtd.is_locked = part_is_locked;
 	if (master->block_isbad)
 		slave->mtd.block_isbad = part_block_isbad;
 	if (master->block_markbad)
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index bd9a443ccf69..38e2ab07e7a3 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -1,6 +1,8 @@
 /* MTD-based superblock management
  *
  * Copyright © 2001-2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
  * Written by:  David Howells <dhowells@redhat.com>
  *              David Woodhouse <dwmw2@infradead.org>
  *
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 362d177efe1b..8b4b67c8a391 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -37,7 +37,6 @@ config MTD_SM_COMMON
 
 config MTD_NAND_MUSEUM_IDS
 	bool "Enable chip ids for obsolete ancient NAND devices"
-	depends on MTD_NAND
 	default n
 	help
 	  Enable this option only when your board has first generation
@@ -61,6 +60,7 @@ config MTD_NAND_DENALI
 config MTD_NAND_DENALI_SCRATCH_REG_ADDR
         hex "Denali NAND size scratch register address"
         default "0xFF108018"
+        depends on MTD_NAND_DENALI
         help
           Some platforms place the NAND chip size in a scratch register
           because (some versions of) the driver aren't able to automatically
@@ -101,13 +101,13 @@ config MTD_NAND_AMS_DELTA
 
 config MTD_NAND_OMAP2
 	tristate "NAND Flash device on OMAP2 and OMAP3"
-	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
 	help
           Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
 
 config MTD_NAND_OMAP_PREFETCH
 	bool "GPMC prefetch support for NAND Flash device"
-	depends on MTD_NAND && MTD_NAND_OMAP2
+	depends on MTD_NAND_OMAP2
 	default y
 	help
 	 The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
@@ -146,7 +146,7 @@ config MTD_NAND_AU1550
 
 config MTD_NAND_BF5XX
 	tristate "Blackfin on-chip NAND Flash Controller driver"
-	depends on (BF54x || BF52x) && MTD_NAND
+	depends on BF54x || BF52x
 	help
 	  This enables the Blackfin on-chip NAND flash controller
 
@@ -236,7 +236,7 @@ config MTD_NAND_S3C2410_CLKSTOP
 
 config MTD_NAND_BCM_UMI
 	tristate "NAND Flash support for BCM Reference Boards"
-	depends on ARCH_BCMRING && MTD_NAND
+	depends on ARCH_BCMRING
 	help
 	  This enables the NAND flash controller on the BCM UMI block.
 
@@ -395,7 +395,7 @@ endchoice
 
 config MTD_NAND_PXA3xx
 	tristate "Support for NAND flash devices on PXA3xx"
-	depends on MTD_NAND && (PXA3xx || ARCH_MMP)
+	depends on PXA3xx || ARCH_MMP
 	help
 	  This enables the driver for the NAND flash device found on
 	  PXA3xx processors
@@ -409,18 +409,18 @@ config MTD_NAND_PXA3xx_BUILTIN
 
 config MTD_NAND_CM_X270
 	tristate "Support for NAND Flash on CM-X270 modules"
-	depends on MTD_NAND && MACH_ARMCORE
+	depends on MACH_ARMCORE
 
 config MTD_NAND_PASEMI
 	tristate "NAND support for PA Semi PWRficient"
-	depends on MTD_NAND && PPC_PASEMI
+	depends on PPC_PASEMI
 	help
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
 config MTD_NAND_TMIO
 	tristate "NAND Flash device on Toshiba Mobile IO Controller"
-	depends on MTD_NAND && MFD_TMIO
+	depends on MFD_TMIO
 	help
 	  Support for NAND flash connected to a Toshiba Mobile IO
 	  Controller in some PDAs, including the Sharp SL6000x.
@@ -434,7 +434,6 @@ config MTD_NAND_NANDSIM
 
 config MTD_NAND_PLATFORM
 	tristate "Support for generic platform NAND driver"
-	depends on MTD_NAND
 	help
 	  This implements a generic NAND driver for on-SOC platform
 	  devices. You will need to provide platform-specific functions
@@ -442,14 +441,14 @@ config MTD_NAND_PLATFORM
 
 config MTD_ALAUDA
 	tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
-	depends on MTD_NAND && USB
+	depends on USB
 	help
 	  These two (and possibly other) Alauda-based cardreaders for
 	  SmartMedia and xD allow raw flash access.
 
 config MTD_NAND_ORION
 	tristate "NAND Flash support for Marvell Orion SoC"
-	depends on PLAT_ORION && MTD_NAND
+	depends on PLAT_ORION
 	help
 	  This enables the NAND flash controller on Orion machines.
 
@@ -458,7 +457,7 @@ config MTD_NAND_ORION
 
 config MTD_NAND_FSL_ELBC
 	tristate "NAND support for Freescale eLBC controllers"
-	depends on MTD_NAND && PPC_OF
+	depends on PPC_OF
 	help
 	  Various Freescale chips, including the 8313, include a NAND Flash
 	  Controller Module with built-in hardware ECC capabilities.
@@ -467,7 +466,7 @@ config MTD_NAND_FSL_ELBC
 
 config MTD_NAND_FSL_UPM
 	tristate "Support for NAND on Freescale UPM"
-	depends on MTD_NAND && (PPC_83xx || PPC_85xx)
+	depends on PPC_83xx || PPC_85xx
 	select FSL_LBC
 	help
 	  Enables support for NAND Flash chips wired onto Freescale PowerPC
@@ -482,7 +481,7 @@ config MTD_NAND_MPC5121_NFC
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
+	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
@@ -495,7 +494,7 @@ config MTD_NAND_NOMADIK
 
 config MTD_NAND_SH_FLCTL
 	tristate "Support for NAND on Renesas SuperH FLCTL"
-	depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
+	depends on SUPERH || ARCH_SHMOBILE
 	help
 	  Several Renesas SuperH CPU has FLCTL. This option enables support
 	  for NAND Flash using FLCTL.
@@ -515,7 +514,7 @@ config MTD_NAND_TXX9NDFMC
 
 config MTD_NAND_SOCRATES
 	tristate "Support for NAND on Socrates board"
-	depends on MTD_NAND && SOCRATES
+	depends on SOCRATES
 	help
 	  Enables support for NAND Flash chips wired onto Socrates board.
 
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 04d30887ca7f..ccce0f03b5dc 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -364,7 +364,7 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 	}
 }
 
-#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
 static const char *part_probes[] = { "cmdlinepart", NULL };
 #endif
 
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 2974995e194d..a382e3dd0a5d 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -20,9 +20,6 @@
  *		- DMA supported in ECC_HW
  *		- YAFFS tested as rootfs in both ECC_HW and ECC_SW
  *
- * TODO:
- * 	Enable JFFS2 over NAND as rootfs
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -206,7 +203,7 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
 
 	if (ctrl & NAND_CLE)
 		bfin_write_NFC_CMD(cmd);
-	else
+	else if (ctrl & NAND_ALE)
 		bfin_write_NFC_ADDR(cmd);
 	SSYNC();
 }
@@ -218,9 +215,9 @@ static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
  */
 static int bf5xx_nand_devready(struct mtd_info *mtd)
 {
-	unsigned short val = bfin_read_NFC_IRQSTAT();
+	unsigned short val = bfin_read_NFC_STAT();
 
-	if ((val & NBUSYIRQ) == NBUSYIRQ)
+	if ((val & NBUSY) == NBUSY)
 		return 1;
 	else
 		return 0;
@@ -317,18 +314,16 @@ static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
 static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 					u_char *read_ecc, u_char *calc_ecc)
 {
-	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 	int ret;
 
 	ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 
-	/* If page size is 512, correct second 256 bytes */
-	if (page_size == 512) {
+	/* If ecc size is 512, correct second 256 bytes */
+	if (chip->ecc.size == 512) {
 		dat += 256;
-		read_ecc += 8;
-		calc_ecc += 8;
+		read_ecc += 3;
+		calc_ecc += 3;
 		ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 	}
 
@@ -344,13 +339,12 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 		const u_char *dat, u_char *ecc_code)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	u16 page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 	u16 ecc0, ecc1;
 	u32 code[2];
 	u8 *p;
 
-	/* first 4 bytes ECC code for 256 page size */
+	/* first 3 bytes ECC code for 256 page size */
 	ecc0 = bfin_read_NFC_ECC0();
 	ecc1 = bfin_read_NFC_ECC1();
 
@@ -358,12 +352,11 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 
 	dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
-	/* first 3 bytes in ecc_code for 256 page size */
 	p = (u8 *) code;
 	memcpy(ecc_code, p, 3);
 
-	/* second 4 bytes ECC code for 512 page size */
-	if (page_size == 512) {
+	/* second 3 bytes ECC code for 512 ecc size */
+	if (chip->ecc.size == 512) {
 		ecc0 = bfin_read_NFC_ECC2();
 		ecc1 = bfin_read_NFC_ECC3();
 		code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
@@ -483,8 +476,7 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 				uint8_t *buf, int is_read)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 	unsigned short val;
 
 	dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
@@ -498,10 +490,10 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	 */
 	if (is_read)
 		invalidate_dcache_range((unsigned int)buf,
-				(unsigned int)(buf + page_size));
+				(unsigned int)(buf + chip->ecc.size));
 	else
 		flush_dcache_range((unsigned int)buf,
-				(unsigned int)(buf + page_size));
+				(unsigned int)(buf + chip->ecc.size));
 
 	/*
 	 * This register must be written before each page is
@@ -510,6 +502,8 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 	 */
 	bfin_write_NFC_RST(ECC_RST);
 	SSYNC();
+	while (bfin_read_NFC_RST() & ECC_RST)
+		cpu_relax();
 
 	disable_dma(CH_NFC);
 	clear_dma_irqstat(CH_NFC);
@@ -520,13 +514,13 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
 
 	/* The DMAs have different size on BF52x and BF54x */
 #ifdef CONFIG_BF52x
-	set_dma_x_count(CH_NFC, (page_size >> 1));
+	set_dma_x_count(CH_NFC, (chip->ecc.size >> 1));
 	set_dma_x_modify(CH_NFC, 2);
 	val = DI_EN | WDSIZE_16;
 #endif
 
 #ifdef CONFIG_BF54x
-	set_dma_x_count(CH_NFC, (page_size >> 2));
+	set_dma_x_count(CH_NFC, (chip->ecc.size >> 2));
 	set_dma_x_modify(CH_NFC, 4);
 	val = DI_EN | WDSIZE_32;
 #endif
@@ -548,12 +542,11 @@ static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
 					uint8_t *buf, int len)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 
 	dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
 
-	if (len == page_size)
+	if (len == chip->ecc.size)
 		bf5xx_nand_dma_rw(mtd, buf, 1);
 	else
 		bf5xx_nand_read_buf(mtd, buf, len);
@@ -563,17 +556,32 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 				const uint8_t *buf, int len)
 {
 	struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
-	struct bf5xx_nand_platform *plat = info->platform;
-	unsigned short page_size = (plat->page_size ? 512 : 256);
+	struct nand_chip *chip = mtd->priv;
 
 	dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
 
-	if (len == page_size)
+	if (len == chip->ecc.size)
 		bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
 	else
 		bf5xx_nand_write_buf(mtd, buf, len);
 }
 
+static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+		uint8_t *buf, int page)
+{
+	bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
+	bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
+static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+		const uint8_t *buf)
+{
+	bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
+	bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
 /*
  * System initialization functions
  */
@@ -627,15 +635,14 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
 
 	/* setup NFC_CTL register */
 	dev_info(info->device,
-		"page_size=%d, data_width=%d, wr_dly=%d, rd_dly=%d\n",
-		(plat->page_size ? 512 : 256),
+		"data_width=%d, wr_dly=%d, rd_dly=%d\n",
 		(plat->data_width ? 16 : 8),
 		plat->wr_dly, plat->rd_dly);
 
-	val = (plat->page_size << NFC_PG_SIZE_OFFSET) |
+	val = (1 << NFC_PG_SIZE_OFFSET) |
 		(plat->data_width << NFC_NWIDTH_OFFSET) |
 		(plat->rd_dly << NFC_RDDLY_OFFSET) |
-		(plat->rd_dly << NFC_WRDLY_OFFSET);
+		(plat->wr_dly << NFC_WRDLY_OFFSET);
 	dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
 
 	bfin_write_NFC_CTL(val);
@@ -698,6 +705,33 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int bf5xx_nand_scan(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	ret = nand_scan_ident(mtd, 1);
+	if (ret)
+		return ret;
+
+	if (hardware_ecc) {
+		/*
+		 * for nand with page size > 512B, think it as several sections with 512B
+		 */
+		if (likely(mtd->writesize >= 512)) {
+			chip->ecc.size = 512;
+			chip->ecc.bytes = 6;
+		} else {
+			chip->ecc.size = 256;
+			chip->ecc.bytes = 3;
+			bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
+			SSYNC();
+		}
+	}
+
+	return	nand_scan_tail(mtd);
+}
+
 /*
  * bf5xx_nand_probe
  *
@@ -783,27 +817,20 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 		chip->badblock_pattern = &bootrom_bbt;
 		chip->ecc.layout = &bootrom_ecclayout;
 #endif
-
-		if (plat->page_size == NFC_PG_SIZE_256) {
-			chip->ecc.bytes = 3;
-			chip->ecc.size = 256;
-		} else if (plat->page_size == NFC_PG_SIZE_512) {
-			chip->ecc.bytes = 6;
-			chip->ecc.size = 512;
-		}
-
 		chip->read_buf      = bf5xx_nand_dma_read_buf;
 		chip->write_buf     = bf5xx_nand_dma_write_buf;
 		chip->ecc.calculate = bf5xx_nand_calculate_ecc;
 		chip->ecc.correct   = bf5xx_nand_correct_data;
 		chip->ecc.mode	    = NAND_ECC_HW;
 		chip->ecc.hwctl	    = bf5xx_nand_enable_hwecc;
+		chip->ecc.read_page_raw = bf5xx_nand_read_page_raw;
+		chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
 	} else {
 		chip->ecc.mode	    = NAND_ECC_SOFT;
 	}
 
 	/* scan hardware nand chip and setup mtd info data struct */
-	if (nand_scan(mtd, 1)) {
+	if (bf5xx_nand_scan(mtd)) {
 		err = -ENXIO;
 		goto out_err_nand_scan;
 	}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 9c9d893affeb..2ac7367afe77 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -311,7 +311,9 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
 	unsigned short ecc10[8];
 	unsigned short *ecc16;
 	u32 syndrome[4];
+	u32 ecc_state;
 	unsigned num_errors, corrected;
+	unsigned long timeo = jiffies + msecs_to_jiffies(100);
 
 	/* All bytes 0xff?  It's an erased page; ignore its ECC. */
 	for (i = 0; i < 10; i++) {
@@ -361,6 +363,21 @@ compare:
 	 */
 	davinci_nand_writel(info, NANDFCR_OFFSET,
 			davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+
+	/*
+	 * ECC_STATE field reads 0x3 (Error correction complete) immediately
+	 * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
+	 * begin trying to poll for the state, you may fall right out of your
+	 * loop without any of the correction calculations having taken place.
+	 * The recommendation from the hardware team is to wait till ECC_STATE
+	 * reads less than 4, which means ECC HW has entered correction state.
+	 */
+	do {
+		ecc_state = (davinci_nand_readl(info,
+				NANDFSR_OFFSET) >> 8) & 0x0f;
+		cpu_relax();
+	} while ((ecc_state < 4) && time_before(jiffies, timeo));
+
 	for (;;) {
 		u32	fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
 
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 3dfda9cc677d..618fb42b86b0 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -21,6 +21,7 @@
 #include <linux/delay.h>
 #include <linux/wait.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/mtd/mtd.h>
 #include <linux/module.h>
@@ -29,15 +30,15 @@
 
 MODULE_LICENSE("GPL");
 
-/* We define a module parameter that allows the user to override 
+/* We define a module parameter that allows the user to override
  * the hardware and decide what timing mode should be used.
  */
 #define NAND_DEFAULT_TIMINGS	-1
 
 static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
 module_param(onfi_timing_mode, int, S_IRUGO);
-MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates"
-					" use default timings");
+MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
+			" -1 indicates use default timings");
 
 #define DENALI_NAND_NAME    "denali-nand"
 
@@ -54,13 +55,13 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates
 			INTR_STATUS0__RST_COMP | \
 			INTR_STATUS0__ERASE_COMP)
 
-/* indicates whether or not the internal value for the flash bank is 
+/* indicates whether or not the internal value for the flash bank is
    valid or not */
-#define CHIP_SELECT_INVALID 	-1
+#define CHIP_SELECT_INVALID	-1
 
 #define SUPPORT_8BITECC		1
 
-/* This macro divides two integers and rounds fractional values up 
+/* This macro divides two integers and rounds fractional values up
  * to the nearest integer value. */
 #define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
 
@@ -83,7 +84,7 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates
 #define ADDR_CYCLE	1
 #define STATUS_CYCLE	2
 
-/* this is a helper macro that allows us to 
+/* this is a helper macro that allows us to
  * format the bank into the proper bits for the controller */
 #define BANK(x) ((x) << 24)
 
@@ -95,59 +96,64 @@ static const struct pci_device_id denali_pci_ids[] = {
 };
 
 
-/* these are static lookup tables that give us easy access to 
-   registers in the NAND controller.  
+/* these are static lookup tables that give us easy access to
+   registers in the NAND controller.
  */
-static const uint32_t intr_status_addresses[4] = {INTR_STATUS0, 
-						  INTR_STATUS1, 
-					     	  INTR_STATUS2, 
+static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
+						  INTR_STATUS1,
+						  INTR_STATUS2,
 						  INTR_STATUS3};
 
 static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0,
-                                               DEVICE_RESET__BANK1,
-                                               DEVICE_RESET__BANK2,
-                                               DEVICE_RESET__BANK3};
+							DEVICE_RESET__BANK1,
+							DEVICE_RESET__BANK2,
+							DEVICE_RESET__BANK3};
 
 static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT,
-                        		      INTR_STATUS1__TIME_OUT,
-		                              INTR_STATUS2__TIME_OUT,
-		                              INTR_STATUS3__TIME_OUT};
+							INTR_STATUS1__TIME_OUT,
+							INTR_STATUS2__TIME_OUT,
+							INTR_STATUS3__TIME_OUT};
 
 static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
-                		           INTR_STATUS1__RST_COMP,
-		                           INTR_STATUS2__RST_COMP,
-		                           INTR_STATUS3__RST_COMP};
+							INTR_STATUS1__RST_COMP,
+							INTR_STATUS2__RST_COMP,
+							INTR_STATUS3__RST_COMP};
 
 /* specifies the debug level of the driver */
-static int nand_debug_level = 0;
+static int nand_debug_level;
 
 /* forward declarations */
 static void clear_interrupts(struct denali_nand_info *denali);
-static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask);
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask);
+static uint32_t wait_for_irq(struct denali_nand_info *denali,
+							uint32_t irq_mask);
+static void denali_irq_enable(struct denali_nand_info *denali,
+							uint32_t int_mask);
 static uint32_t read_interrupt_status(struct denali_nand_info *denali);
 
 #define DEBUG_DENALI 0
 
 /* This is a wrapper for writing to the denali registers.
  * this allows us to create debug information so we can
- * observe how the driver is programming the device. 
+ * observe how the driver is programming the device.
  * it uses standard linux convention for (val, addr) */
 static void denali_write32(uint32_t value, void *addr)
 {
-	iowrite32(value, addr);	
+	iowrite32(value, addr);
 
 #if DEBUG_DENALI
-	printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
+	printk(KERN_INFO "wrote: 0x%x -> 0x%x\n", value,
+			(uint32_t)((uint32_t)addr & 0x1fff));
 #endif
-} 
+}
 
-/* Certain operations for the denali NAND controller use an indexed mode to read/write 
-   data. The operation is performed by writing the address value of the command to 
-   the device memory followed by the data. This function abstracts this common 
-   operation. 
+/* Certain operations for the denali NAND controller use
+ * an indexed mode to read/write data. The operation is
+ * performed by writing the address value of the command
+ * to the device memory followed by the data. This function
+ * abstracts this common operation.
 */
-static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data)
+static void index_addr(struct denali_nand_info *denali,
+				uint32_t address, uint32_t data)
 {
 	denali_write32(address, denali->flash_mem);
 	denali_write32(data, denali->flash_mem + 0x10);
@@ -161,7 +167,7 @@ static void index_addr_read_data(struct denali_nand_info *denali,
 	*pdata = ioread32(denali->flash_mem + 0x10);
 }
 
-/* We need to buffer some data for some of the NAND core routines. 
+/* We need to buffer some data for some of the NAND core routines.
  * The operations manage buffering that data. */
 static void reset_buf(struct denali_nand_info *denali)
 {
@@ -183,7 +189,7 @@ static void read_status(struct denali_nand_info *denali)
 	reset_buf(denali);
 
 	/* initiate a device status read */
-	cmd = MODE_11 | BANK(denali->flash_bank); 
+	cmd = MODE_11 | BANK(denali->flash_bank);
 	index_addr(denali, cmd | COMMAND_CYCLE, 0x70);
 	denali_write32(cmd | STATUS_CYCLE, denali->flash_mem);
 
@@ -191,7 +197,8 @@ static void read_status(struct denali_nand_info *denali)
 	write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
 
 #if DEBUG_DENALI
-	printk("device reporting status value of 0x%2x\n", denali->buf.buf[0]);
+	printk(KERN_INFO "device reporting status value of 0x%2x\n",
+			denali->buf.buf[0]);
 #endif
 }
 
@@ -199,7 +206,7 @@ static void read_status(struct denali_nand_info *denali)
 static void reset_bank(struct denali_nand_info *denali)
 {
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = reset_complete[denali->flash_bank] | 
+	uint32_t irq_mask = reset_complete[denali->flash_bank] |
 			    operation_timeout[denali->flash_bank];
 	int bank = 0;
 
@@ -209,15 +216,13 @@ static void reset_bank(struct denali_nand_info *denali)
 	denali_write32(bank, denali->flash_reg + DEVICE_RESET);
 
 	irq_status = wait_for_irq(denali, irq_mask);
-	
+
 	if (irq_status & operation_timeout[denali->flash_bank])
-	{
 		printk(KERN_ERR "reset bank failed.\n");
-	}
 }
 
 /* Reset the flash controller */
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
+static uint16_t denali_nand_reset(struct denali_nand_info *denali)
 {
 	uint32_t i;
 
@@ -229,8 +234,10 @@ static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
 		denali->flash_reg + intr_status_addresses[i]);
 
 	for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
-		denali_write32(device_reset_banks[i], denali->flash_reg + DEVICE_RESET);
-		while (!(ioread32(denali->flash_reg + intr_status_addresses[i]) &
+		denali_write32(device_reset_banks[i],
+				denali->flash_reg + DEVICE_RESET);
+		while (!(ioread32(denali->flash_reg +
+						intr_status_addresses[i]) &
 			(reset_complete[i] | operation_timeout[i])))
 			;
 		if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
@@ -246,11 +253,12 @@ static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
 	return PASS;
 }
 
-/* this routine calculates the ONFI timing values for a given mode and programs
- * the clocking register accordingly. The mode is determined by the get_onfi_nand_para
-   routine.
+/* this routine calculates the ONFI timing values for a given mode and
+ * programs the clocking register accordingly. The mode is determined by
+ * the get_onfi_nand_para routine.
  */
-static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode)
+static void nand_onfi_timing_set(struct denali_nand_info *denali,
+								uint16_t mode)
 {
 	uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
 	uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
@@ -347,136 +355,24 @@ static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode
 	denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
 }
 
-/* configures the initial ECC settings for the controller */
-static void set_ecc_config(struct denali_nand_info *denali)
-{
-#if SUPPORT_8BITECC
-	if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) < 4096) ||
-		(ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) <= 128))
-		denali_write32(8, denali->flash_reg + ECC_CORRECTION);
-#endif
-
-	if ((ioread32(denali->flash_reg + ECC_CORRECTION) & ECC_CORRECTION__VALUE)
-		== 1) {
-		denali->dev_info.wECCBytesPerSector = 4;
-		denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
-		denali->dev_info.wNumPageSpareFlag =
-			denali->dev_info.wPageSpareSize -
-			denali->dev_info.wPageDataSize /
-			(ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
-			denali->dev_info.wECCBytesPerSector
-			- denali->dev_info.wSpareSkipBytes;
-	} else {
-		denali->dev_info.wECCBytesPerSector =
-			(ioread32(denali->flash_reg + ECC_CORRECTION) &
-			ECC_CORRECTION__VALUE) * 13 / 8;
-		if ((denali->dev_info.wECCBytesPerSector) % 2 == 0)
-			denali->dev_info.wECCBytesPerSector += 2;
-		else
-			denali->dev_info.wECCBytesPerSector += 1;
-
-		denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
-		denali->dev_info.wNumPageSpareFlag = denali->dev_info.wPageSpareSize -
-			denali->dev_info.wPageDataSize /
-			(ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
-			denali->dev_info.wECCBytesPerSector
-			- denali->dev_info.wSpareSkipBytes;
-	}
-}
-
 /* queries the NAND device to see what ONFI modes it supports. */
 static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
 {
 	int i;
-	uint16_t blks_lun_l, blks_lun_h, n_of_luns;
-	uint32_t blockperlun, id;
-
-	denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
-
-	while (!((ioread32(denali->flash_reg + INTR_STATUS0) &
-		INTR_STATUS0__RST_COMP) |
-		(ioread32(denali->flash_reg + INTR_STATUS0) &
-		INTR_STATUS0__TIME_OUT)))
-		;
-
-	if (ioread32(denali->flash_reg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) {
-		denali_write32(DEVICE_RESET__BANK1, denali->flash_reg + DEVICE_RESET);
-		while (!((ioread32(denali->flash_reg + INTR_STATUS1) &
-			INTR_STATUS1__RST_COMP) |
-			(ioread32(denali->flash_reg + INTR_STATUS1) &
-			INTR_STATUS1__TIME_OUT)))
-			;
-
-		if (ioread32(denali->flash_reg + INTR_STATUS1) &
-			INTR_STATUS1__RST_COMP) {
-			denali_write32(DEVICE_RESET__BANK2,
-				denali->flash_reg + DEVICE_RESET);
-			while (!((ioread32(denali->flash_reg + INTR_STATUS2) &
-				INTR_STATUS2__RST_COMP) |
-				(ioread32(denali->flash_reg + INTR_STATUS2) &
-				INTR_STATUS2__TIME_OUT)))
-				;
-
-			if (ioread32(denali->flash_reg + INTR_STATUS2) &
-				INTR_STATUS2__RST_COMP) {
-				denali_write32(DEVICE_RESET__BANK3,
-					denali->flash_reg + DEVICE_RESET);
-				while (!((ioread32(denali->flash_reg + INTR_STATUS3) &
-					INTR_STATUS3__RST_COMP) |
-					(ioread32(denali->flash_reg + INTR_STATUS3) &
-					INTR_STATUS3__TIME_OUT)))
-					;
-			} else {
-				printk(KERN_ERR "Getting a time out for bank 2!\n");
-			}
-		} else {
-			printk(KERN_ERR "Getting a time out for bank 1!\n");
-		}
-	}
-
-	denali_write32(INTR_STATUS0__TIME_OUT, denali->flash_reg + INTR_STATUS0);
-	denali_write32(INTR_STATUS1__TIME_OUT, denali->flash_reg + INTR_STATUS1);
-	denali_write32(INTR_STATUS2__TIME_OUT, denali->flash_reg + INTR_STATUS2);
-	denali_write32(INTR_STATUS3__TIME_OUT, denali->flash_reg + INTR_STATUS3);
-
-	denali->dev_info.wONFIDevFeatures =
-		ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES);
-	denali->dev_info.wONFIOptCommands =
-		ioread32(denali->flash_reg + ONFI_OPTIONAL_COMMANDS);
-	denali->dev_info.wONFITimingMode =
-		ioread32(denali->flash_reg + ONFI_TIMING_MODE);
-	denali->dev_info.wONFIPgmCacheTimingMode =
-		ioread32(denali->flash_reg + ONFI_PGM_CACHE_TIMING_MODE);
-
-	n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
-		ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
-	blks_lun_l = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
-	blks_lun_h = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
-
-	blockperlun = (blks_lun_h << 16) | blks_lun_l;
-
-	denali->dev_info.wTotalBlocks = n_of_luns * blockperlun;
-
+	/* we needn't to do a reset here because driver has already
+	 * reset all the banks before
+	 * */
 	if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
 		ONFI_TIMING_MODE__VALUE))
 		return FAIL;
 
 	for (i = 5; i > 0; i--) {
-		if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & (0x01 << i))
+		if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
+			(0x01 << i))
 			break;
 	}
 
-	NAND_ONFi_Timing_Mode(denali, i);
-
-	index_addr(denali, MODE_11 | 0, 0x90);
-	index_addr(denali, MODE_11 | 1, 0);
-
-	for (i = 0; i < 3; i++)
-		index_addr_read_data(denali, MODE_11 | 2, &id);
-
-	nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
-
-	denali->dev_info.MLCDevice = id & 0x0C;
+	nand_onfi_timing_set(denali, i);
 
 	/* By now, all the ONFI devices we know support the page cache */
 	/* rw feature. So here we enable the pipeline_rw_ahead feature */
@@ -486,25 +382,10 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
 	return PASS;
 }
 
-static void get_samsung_nand_para(struct denali_nand_info *denali)
+static void get_samsung_nand_para(struct denali_nand_info *denali,
+							uint8_t device_id)
 {
-	uint8_t no_of_planes;
-	uint32_t blk_size;
-	uint64_t plane_size, capacity;
-	uint32_t id_bytes[5];
-	int i;
-
-	index_addr(denali, (uint32_t)(MODE_11 | 0), 0x90);
-	index_addr(denali, (uint32_t)(MODE_11 | 1), 0);
-	for (i = 0; i < 5; i++)
-		index_addr_read_data(denali, (uint32_t)(MODE_11 | 2), &id_bytes[i]);
-
-	nand_dbg_print(NAND_DBG_DEBUG,
-		"ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
-		id_bytes[0], id_bytes[1], id_bytes[2],
-		id_bytes[3], id_bytes[4]);
-
-	if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */
+	if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
 		/* Set timing register values according to datasheet */
 		denali_write32(5, denali->flash_reg + ACC_CLKS);
 		denali_write32(20, denali->flash_reg + RE_2_WE);
@@ -514,19 +395,10 @@ static void get_samsung_nand_para(struct denali_nand_info *denali)
 		denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT);
 		denali_write32(2, denali->flash_reg + CS_SETUP_CNT);
 	}
-
-	no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
-	plane_size  = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4);
-	blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) & 0x30) >> 4);
-	capacity = (uint64_t)128 * plane_size * no_of_planes;
-
-	do_div(capacity, blk_size);
-	denali->dev_info.wTotalBlocks = capacity;
 }
 
 static void get_toshiba_nand_para(struct denali_nand_info *denali)
 {
-	void __iomem *scratch_reg;
 	uint32_t tmp;
 
 	/* Workaround to fix a controller bug which reports a wrong */
@@ -536,81 +408,52 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
 		denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
 		tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
 			ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-		denali_write32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+		denali_write32(tmp,
+				denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
 #if SUPPORT_15BITECC
 		denali_write32(15, denali->flash_reg + ECC_CORRECTION);
 #elif SUPPORT_8BITECC
 		denali_write32(8, denali->flash_reg + ECC_CORRECTION);
 #endif
 	}
-
-	/* As Toshiba NAND can not provide it's block number, */
-	/* so here we need user to provide the correct block */
-	/* number in a scratch register before the Linux NAND */
-	/* driver is loaded. If no valid value found in the scratch */
-	/* register, then we use default block number value */
-	scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
-	if (!scratch_reg) {
-		printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
-			__FILE__, __LINE__);
-		denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-	} else {
-		nand_dbg_print(NAND_DBG_WARN,
-			"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
-		denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
-		if (denali->dev_info.wTotalBlocks < 512)
-			denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-		iounmap(scratch_reg);
-	}
 }
 
-static void get_hynix_nand_para(struct denali_nand_info *denali)
+static void get_hynix_nand_para(struct denali_nand_info *denali,
+							uint8_t device_id)
 {
-	void __iomem *scratch_reg;
 	uint32_t main_size, spare_size;
 
-	switch (denali->dev_info.wDeviceID) {
+	switch (device_id) {
 	case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
 	case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
 		denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK);
 		denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
 		denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-		main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
-		spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
-		denali_write32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
-		denali_write32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+		main_size = 4096 *
+			ioread32(denali->flash_reg + DEVICES_CONNECTED);
+		spare_size = 224 *
+			ioread32(denali->flash_reg + DEVICES_CONNECTED);
+		denali_write32(main_size,
+				denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
+		denali_write32(spare_size,
+				denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
 		denali_write32(0, denali->flash_reg + DEVICE_WIDTH);
 #if SUPPORT_15BITECC
 		denali_write32(15, denali->flash_reg + ECC_CORRECTION);
 #elif SUPPORT_8BITECC
 		denali_write32(8, denali->flash_reg + ECC_CORRECTION);
 #endif
-		denali->dev_info.MLCDevice  = 1;
 		break;
 	default:
 		nand_dbg_print(NAND_DBG_WARN,
 			"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
 			"Will use default parameter values instead.\n",
-			denali->dev_info.wDeviceID);
-	}
-
-	scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
-	if (!scratch_reg) {
-		printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
-			__FILE__, __LINE__);
-		denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-	} else {
-		nand_dbg_print(NAND_DBG_WARN,
-			"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
-		denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
-		if (denali->dev_info.wTotalBlocks < 512)
-			denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
-		iounmap(scratch_reg);
+			device_id);
 	}
 }
 
 /* determines how many NAND chips are connected to the controller. Note for
-   Intel CE4100 devices we don't support more than one device. 
+   Intel CE4100 devices we don't support more than one device.
  */
 static void find_valid_banks(struct denali_nand_info *denali)
 {
@@ -621,7 +464,8 @@ static void find_valid_banks(struct denali_nand_info *denali)
 	for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
 		index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
 		index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
-		index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
+		index_addr_read_data(denali,
+				(uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
 
 		nand_dbg_print(NAND_DBG_DEBUG,
 			"Return 1st ID for bank[%d]: %x\n", i, id[i]);
@@ -637,14 +481,12 @@ static void find_valid_banks(struct denali_nand_info *denali)
 		}
 	}
 
-	if (denali->platform == INTEL_CE4100)
-	{
+	if (denali->platform == INTEL_CE4100) {
 		/* Platform limitations of the CE4100 device limit
 		 * users to a single chip solution for NAND.
-                 * Multichip support is not enabled. 
-		 */ 
-		if (denali->total_used_banks != 1)
-		{
+		 * Multichip support is not enabled.
+		 */
+		if (denali->total_used_banks != 1) {
 			printk(KERN_ERR "Sorry, Intel CE4100 only supports "
 					"a single NAND device.\n");
 			BUG();
@@ -656,150 +498,60 @@ static void find_valid_banks(struct denali_nand_info *denali)
 
 static void detect_partition_feature(struct denali_nand_info *denali)
 {
+	/* For MRST platform, denali->fwblks represent the
+	 * number of blocks firmware is taken,
+	 * FW is in protect partition and MTD driver has no
+	 * permission to access it. So let driver know how many
+	 * blocks it can't touch.
+	 * */
 	if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
 		if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) &
 			PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
-			denali->dev_info.wSpectraStartBlock =
+			denali->fwblks =
 			    ((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
 			      MIN_MAX_BANK_1__MIN_VALUE) *
-			     denali->dev_info.wTotalBlocks)
+			     denali->blksperchip)
 			    +
 			    (ioread32(denali->flash_reg + MIN_BLK_ADDR_1) &
 			    MIN_BLK_ADDR_1__VALUE);
-
-			denali->dev_info.wSpectraEndBlock =
-			    (((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
-			       MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
-			     denali->dev_info.wTotalBlocks)
-			    +
-			    (ioread32(denali->flash_reg + MAX_BLK_ADDR_1) &
-			    MAX_BLK_ADDR_1__VALUE);
-
-			denali->dev_info.wTotalBlocks *= denali->total_used_banks;
-
-			if (denali->dev_info.wSpectraEndBlock >=
-			    denali->dev_info.wTotalBlocks) {
-				denali->dev_info.wSpectraEndBlock =
-				    denali->dev_info.wTotalBlocks - 1;
-			}
-
-			denali->dev_info.wDataBlockNum =
-				denali->dev_info.wSpectraEndBlock -
-				denali->dev_info.wSpectraStartBlock + 1;
-		} else {
-			denali->dev_info.wTotalBlocks *= denali->total_used_banks;
-			denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
-			denali->dev_info.wSpectraEndBlock =
-				denali->dev_info.wTotalBlocks - 1;
-			denali->dev_info.wDataBlockNum =
-				denali->dev_info.wSpectraEndBlock -
-				denali->dev_info.wSpectraStartBlock + 1;
-		}
-	} else {
-		denali->dev_info.wTotalBlocks *= denali->total_used_banks;
-		denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
-		denali->dev_info.wSpectraEndBlock = denali->dev_info.wTotalBlocks - 1;
-		denali->dev_info.wDataBlockNum =
-			denali->dev_info.wSpectraEndBlock -
-			denali->dev_info.wSpectraStartBlock + 1;
-	}
+		} else
+			denali->fwblks = SPECTRA_START_BLOCK;
+	} else
+		denali->fwblks = SPECTRA_START_BLOCK;
 }
 
-static void dump_device_info(struct denali_nand_info *denali)
-{
-	nand_dbg_print(NAND_DBG_DEBUG, "denali->dev_info:\n");
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
-		denali->dev_info.wDeviceMaker);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
-		denali->dev_info.wDeviceID);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
-		denali->dev_info.wDeviceType);
-	nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
-		denali->dev_info.wSpectraStartBlock);
-	nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
-		denali->dev_info.wSpectraEndBlock);
-	nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
-		denali->dev_info.wTotalBlocks);
-	nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
-		denali->dev_info.wPagesPerBlock);
-	nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
-		denali->dev_info.wPageSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
-		denali->dev_info.wPageDataSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
-		denali->dev_info.wPageSpareSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
-		denali->dev_info.wNumPageSpareFlag);
-	nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
-		denali->dev_info.wECCBytesPerSector);
-	nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
-		denali->dev_info.wBlockSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
-		denali->dev_info.wBlockDataSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
-		denali->dev_info.wDataBlockNum);
-	nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
-		denali->dev_info.bPlaneNum);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
-		denali->dev_info.wDeviceMainAreaSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
-		denali->dev_info.wDeviceSpareAreaSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
-		denali->dev_info.wDevicesConnected);
-	nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
-		denali->dev_info.wDeviceWidth);
-	nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
-		denali->dev_info.wHWRevision);
-	nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
-		denali->dev_info.wHWFeatures);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
-		denali->dev_info.wONFIDevFeatures);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
-		denali->dev_info.wONFIOptCommands);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
-		denali->dev_info.wONFITimingMode);
-	nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
-		denali->dev_info.wONFIPgmCacheTimingMode);
-	nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
-		denali->dev_info.MLCDevice ? "Yes" : "No");
-	nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
-		denali->dev_info.wSpareSkipBytes);
-	nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
-		denali->dev_info.nBitsInPageNumber);
-	nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
-		denali->dev_info.nBitsInPageDataSize);
-	nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
-		denali->dev_info.nBitsInBlockDataSize);
-}
-
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
+static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
 {
 	uint16_t status = PASS;
-	uint8_t no_of_planes;
+	uint32_t id_bytes[5], addr;
+	uint8_t i, maf_id, device_id;
 
 	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
 		       __FILE__, __LINE__, __func__);
 
-	denali->dev_info.wDeviceMaker = ioread32(denali->flash_reg + MANUFACTURER_ID);
-	denali->dev_info.wDeviceID = ioread32(denali->flash_reg + DEVICE_ID);
-	denali->dev_info.bDeviceParam0 = ioread32(denali->flash_reg + DEVICE_PARAM_0);
-	denali->dev_info.bDeviceParam1 = ioread32(denali->flash_reg + DEVICE_PARAM_1);
-	denali->dev_info.bDeviceParam2 = ioread32(denali->flash_reg + DEVICE_PARAM_2);
-
-	denali->dev_info.MLCDevice = ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c;
+	/* Use read id method to get device ID and other
+	 * params. For some NAND chips, controller can't
+	 * report the correct device ID by reading from
+	 * DEVICE_ID register
+	 * */
+	addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+	index_addr(denali, (uint32_t)addr | 0, 0x90);
+	index_addr(denali, (uint32_t)addr | 1, 0);
+	for (i = 0; i < 5; i++)
+		index_addr_read_data(denali, addr | 2, &id_bytes[i]);
+	maf_id = id_bytes[0];
+	device_id = id_bytes[1];
 
 	if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
 		ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
 		if (FAIL == get_onfi_nand_para(denali))
 			return FAIL;
-	} else if (denali->dev_info.wDeviceMaker == 0xEC) { /* Samsung NAND */
-		get_samsung_nand_para(denali);
-	} else if (denali->dev_info.wDeviceMaker == 0x98) { /* Toshiba NAND */
+	} else if (maf_id == 0xEC) { /* Samsung NAND */
+		get_samsung_nand_para(denali, device_id);
+	} else if (maf_id == 0x98) { /* Toshiba NAND */
 		get_toshiba_nand_para(denali);
-	} else if (denali->dev_info.wDeviceMaker == 0xAD) { /* Hynix NAND */
-		get_hynix_nand_para(denali);
-	} else {
-		denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+	} else if (maf_id == 0xAD) { /* Hynix NAND */
+		get_hynix_nand_para(denali, device_id);
 	}
 
 	nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
@@ -814,88 +566,20 @@ static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
 			ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
 			ioread32(denali->flash_reg + CS_SETUP_CNT));
 
-	denali->dev_info.wHWRevision = ioread32(denali->flash_reg + REVISION);
-	denali->dev_info.wHWFeatures = ioread32(denali->flash_reg + FEATURES);
-
-	denali->dev_info.wDeviceMainAreaSize =
-		ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
-	denali->dev_info.wDeviceSpareAreaSize =
-		ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-
-	denali->dev_info.wPageDataSize =
-		ioread32(denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
-
-	/* Note: When using the Micon 4K NAND device, the controller will report
-	 * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
-	 * And if force set it to 218 bytes, the controller can not work
-	 * correctly. So just let it be. But keep in mind that this bug may
-	 * cause
-	 * other problems in future.       - Yunpeng  2008-10-10
-	 */
-	denali->dev_info.wPageSpareSize =
-		ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
-
-	denali->dev_info.wPagesPerBlock = ioread32(denali->flash_reg + PAGES_PER_BLOCK);
-
-	denali->dev_info.wPageSize =
-	    denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize;
-	denali->dev_info.wBlockSize =
-	    denali->dev_info.wPageSize * denali->dev_info.wPagesPerBlock;
-	denali->dev_info.wBlockDataSize =
-	    denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize;
-
-	denali->dev_info.wDeviceWidth = ioread32(denali->flash_reg + DEVICE_WIDTH);
-	denali->dev_info.wDeviceType =
-		((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8);
-
-	denali->dev_info.wDevicesConnected = ioread32(denali->flash_reg + DEVICES_CONNECTED);
-
-	denali->dev_info.wSpareSkipBytes =
-		ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) *
-		denali->dev_info.wDevicesConnected;
-
-	denali->dev_info.nBitsInPageNumber =
-		ilog2(denali->dev_info.wPagesPerBlock);
-	denali->dev_info.nBitsInPageDataSize =
-		ilog2(denali->dev_info.wPageDataSize);
-	denali->dev_info.nBitsInBlockDataSize =
-		ilog2(denali->dev_info.wBlockDataSize);
-
-	set_ecc_config(denali);
-
-	no_of_planes = ioread32(denali->flash_reg + NUMBER_OF_PLANES) &
-		NUMBER_OF_PLANES__VALUE;
-
-	switch (no_of_planes) {
-	case 0:
-	case 1:
-	case 3:
-	case 7:
-		denali->dev_info.bPlaneNum = no_of_planes + 1;
-		break;
-	default:
-		status = FAIL;
-		break;
-	}
-
 	find_valid_banks(denali);
 
 	detect_partition_feature(denali);
 
-	dump_device_info(denali);
-
 	/* If the user specified to override the default timings
-	 * with a specific ONFI mode, we apply those changes here. 
+	 * with a specific ONFI mode, we apply those changes here.
 	 */
 	if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
-	{
-		NAND_ONFi_Timing_Mode(denali, onfi_timing_mode);
-	}
+		nand_onfi_timing_set(denali, onfi_timing_mode);
 
 	return status;
 }
 
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
+static void denali_set_intr_modes(struct denali_nand_info *denali,
 					uint16_t INT_ENABLE)
 {
 	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
@@ -912,7 +596,7 @@ static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
  */
 static inline bool is_flash_bank_valid(int flash_bank)
 {
-	return (flash_bank >= 0 && flash_bank < 4); 
+	return (flash_bank >= 0 && flash_bank < 4);
 }
 
 static void denali_irq_init(struct denali_nand_info *denali)
@@ -920,7 +604,7 @@ static void denali_irq_init(struct denali_nand_info *denali)
 	uint32_t int_mask = 0;
 
 	/* Disable global interrupts */
-	NAND_LLD_Enable_Disable_Interrupts(denali, false);
+	denali_set_intr_modes(denali, false);
 
 	int_mask = DENALI_IRQ_ALL;
 
@@ -935,11 +619,12 @@ static void denali_irq_init(struct denali_nand_info *denali)
 
 static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
 {
-	NAND_LLD_Enable_Disable_Interrupts(denali, false);
+	denali_set_intr_modes(denali, false);
 	free_irq(irqnum, denali);
 }
 
-static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask)
+static void denali_irq_enable(struct denali_nand_info *denali,
+							uint32_t int_mask)
 {
 	denali_write32(int_mask, denali->flash_reg + INTR_EN0);
 	denali_write32(int_mask, denali->flash_reg + INTR_EN1);
@@ -948,15 +633,16 @@ static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask
 }
 
 /* This function only returns when an interrupt that this driver cares about
- * occurs. This is to reduce the overhead of servicing interrupts 
+ * occurs. This is to reduce the overhead of servicing interrupts
  */
 static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
 {
-	return (read_interrupt_status(denali) & DENALI_IRQ_ALL);
+	return read_interrupt_status(denali) & DENALI_IRQ_ALL;
 }
 
 /* Interrupts are cleared by writing a 1 to the appropriate status bit */
-static inline void clear_interrupt(struct denali_nand_info *denali, uint32_t irq_mask)
+static inline void clear_interrupt(struct denali_nand_info *denali,
+							uint32_t irq_mask)
 {
 	uint32_t intr_status_reg = 0;
 
@@ -995,17 +681,15 @@ static void print_irq_log(struct denali_nand_info *denali)
 {
 	int i = 0;
 
-	printk("ISR debug log index = %X\n", denali->idx);
+	printk(KERN_INFO "ISR debug log index = %X\n", denali->idx);
 	for (i = 0; i < 32; i++)
-	{
-		printk("%08X: %08X\n", i, denali->irq_debug_array[i]);
-	}
+		printk(KERN_INFO "%08X: %08X\n", i, denali->irq_debug_array[i]);
 }
 #endif
 
-/* This is the interrupt service routine. It handles all interrupts 
- * sent to this device. Note that on CE4100, this is a shared 
- * interrupt. 
+/* This is the interrupt service routine. It handles all interrupts
+ * sent to this device. Note that on CE4100, this is a shared
+ * interrupt.
  */
 static irqreturn_t denali_isr(int irq, void *dev_id)
 {
@@ -1015,20 +699,20 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
 
 	spin_lock(&denali->irq_lock);
 
-	/* check to see if a valid NAND chip has 
-         * been selected. 
+	/* check to see if a valid NAND chip has
+	 * been selected.
 	 */
-	if (is_flash_bank_valid(denali->flash_bank))
-	{
-		/* check to see if controller generated 
+	if (is_flash_bank_valid(denali->flash_bank)) {
+		/* check to see if controller generated
 		 * the interrupt, since this is a shared interrupt */
-		if ((irq_status = denali_irq_detected(denali)) != 0)
-		{
+		irq_status = denali_irq_detected(denali);
+		if (irq_status != 0) {
 #if DEBUG_DENALI
-			denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
+			denali->irq_debug_array[denali->idx++] =
+				0x10000000 | irq_status;
 			denali->idx %= 32;
 
-			printk("IRQ status = 0x%04x\n", irq_status);
+			printk(KERN_INFO "IRQ status = 0x%04x\n", irq_status);
 #endif
 			/* handle interrupt */
 			/* first acknowledge it */
@@ -1054,61 +738,62 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
 	bool retry = false;
 	unsigned long timeout = msecs_to_jiffies(1000);
 
-	do
-	{
+	do {
 #if DEBUG_DENALI
-		printk("waiting for 0x%x\n", irq_mask);
+		printk(KERN_INFO "waiting for 0x%x\n", irq_mask);
 #endif
-		comp_res = wait_for_completion_timeout(&denali->complete, timeout);
+		comp_res =
+			wait_for_completion_timeout(&denali->complete, timeout);
 		spin_lock_irq(&denali->irq_lock);
 		intr_status = denali->irq_status;
 
 #if DEBUG_DENALI
-		denali->irq_debug_array[denali->idx++] = 0x20000000 | (irq_mask << 16) | intr_status;
+		denali->irq_debug_array[denali->idx++] =
+			0x20000000 | (irq_mask << 16) | intr_status;
 		denali->idx %= 32;
 #endif
 
-		if (intr_status & irq_mask)
-		{
+		if (intr_status & irq_mask) {
 			denali->irq_status &= ~irq_mask;
 			spin_unlock_irq(&denali->irq_lock);
 #if DEBUG_DENALI
-			if (retry) printk("status on retry = 0x%x\n", intr_status);
+			if (retry)
+				printk(KERN_INFO "status on retry = 0x%x\n",
+						intr_status);
 #endif
 			/* our interrupt was detected */
 			break;
-		}
-		else 
-		{
-			/* these are not the interrupts you are looking for - 
-		           need to wait again */
+		} else {
+			/* these are not the interrupts you are looking for -
+			 * need to wait again */
 			spin_unlock_irq(&denali->irq_lock);
 #if DEBUG_DENALI
 			print_irq_log(denali);
-			printk("received irq nobody cared: irq_status = 0x%x,"
-				" irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res);
+			printk(KERN_INFO "received irq nobody cared:"
+					" irq_status = 0x%x, irq_mask = 0x%x,"
+					" timeout = %ld\n", intr_status,
+					irq_mask, comp_res);
 #endif
 			retry = true;
 		}
 	} while (comp_res != 0);
 
-	if (comp_res == 0)
-	{
+	if (comp_res == 0) {
 		/* timeout */
-		printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n", 
-	       			intr_status, irq_mask);
+		printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
+				intr_status, irq_mask);
 
 		intr_status = 0;
 	}
 	return intr_status;
 }
 
-/* This helper function setups the registers for ECC and whether or not 
+/* This helper function setups the registers for ECC and whether or not
    the spare area will be transfered. */
-static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, 
+static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 				bool transfer_spare)
 {
-	int ecc_en_flag = 0, transfer_spare_flag = 0; 
+	int ecc_en_flag = 0, transfer_spare_flag = 0;
 
 	/* set ECC, transfer spare bits if needed */
 	ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
@@ -1116,85 +801,85 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 
 	/* Enable spare area/ECC per user's request. */
 	denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
-	denali_write32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+	denali_write32(transfer_spare_flag,
+			denali->flash_reg + TRANSFER_SPARE_REG);
 }
 
-/* sends a pipeline command operation to the controller. See the Denali NAND 
-   controller's user guide for more information (section 4.2.3.6). 
+/* sends a pipeline command operation to the controller. See the Denali NAND
+   controller's user guide for more information (section 4.2.3.6).
  */
-static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en, 
-					bool transfer_spare, int access_type, 
-					int op)
+static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
+							bool ecc_en,
+							bool transfer_spare,
+							int access_type,
+							int op)
 {
 	int status = PASS;
-	uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0, 
+	uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
 		 irq_mask = 0;
 
-	if (op == DENALI_READ) irq_mask = INTR_STATUS0__LOAD_COMP;
-	else if (op == DENALI_WRITE) irq_mask = 0;
-	else BUG();
+	if (op == DENALI_READ)
+		irq_mask = INTR_STATUS0__LOAD_COMP;
+	else if (op == DENALI_WRITE)
+		irq_mask = 0;
+	else
+		BUG();
 
 	setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
 
 #if DEBUG_DENALI
 	spin_lock_irq(&denali->irq_lock);
-	denali->irq_debug_array[denali->idx++] = 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | (access_type << 4);
+	denali->irq_debug_array[denali->idx++] =
+		0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) |
+		(access_type << 4);
 	denali->idx %= 32;
 	spin_unlock_irq(&denali->irq_lock);
 #endif
 
 
 	/* clear interrupts */
-	clear_interrupts(denali);	
+	clear_interrupts(denali);
 
 	addr = BANK(denali->flash_bank) | denali->page;
 
-	if (op == DENALI_WRITE && access_type != SPARE_ACCESS)
-	{
-		cmd = MODE_01 | addr; 
+	if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
+		cmd = MODE_01 | addr;
 		denali_write32(cmd, denali->flash_mem);
-	}
-	else if (op == DENALI_WRITE && access_type == SPARE_ACCESS)
-	{
+	} else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
 		/* read spare area */
-		cmd = MODE_10 | addr; 
+		cmd = MODE_10 | addr;
 		index_addr(denali, (uint32_t)cmd, access_type);
 
-		cmd = MODE_01 | addr; 
+		cmd = MODE_01 | addr;
 		denali_write32(cmd, denali->flash_mem);
-	}
-	else if (op == DENALI_READ)
-	{
+	} else if (op == DENALI_READ) {
 		/* setup page read request for access type */
-		cmd = MODE_10 | addr; 
+		cmd = MODE_10 | addr;
 		index_addr(denali, (uint32_t)cmd, access_type);
 
 		/* page 33 of the NAND controller spec indicates we should not
-		   use the pipeline commands in Spare area only mode. So we 
+		   use the pipeline commands in Spare area only mode. So we
 		   don't.
 		 */
-		if (access_type == SPARE_ACCESS)
-		{
+		if (access_type == SPARE_ACCESS) {
 			cmd = MODE_01 | addr;
 			denali_write32(cmd, denali->flash_mem);
-		}
-		else
-		{
-			index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count);
-	
-			/* wait for command to be accepted  
-			 * can always use status0 bit as the mask is identical for each
+		} else {
+			index_addr(denali, (uint32_t)cmd,
+					0x2000 | op | page_count);
+
+			/* wait for command to be accepted
+			 * can always use status0 bit as the
+			 * mask is identical for each
 			 * bank. */
 			irq_status = wait_for_irq(denali, irq_mask);
 
-			if (irq_status == 0)
-			{
+			if (irq_status == 0) {
 				printk(KERN_ERR "cmd, page, addr on timeout "
-					"(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr);
+					"(0x%x, 0x%x, 0x%x)\n", cmd,
+					denali->page, addr);
 				status = FAIL;
-			}
-			else
-			{
+			} else {
 				cmd = MODE_01 | addr;
 				denali_write32(cmd, denali->flash_mem);
 			}
@@ -1204,36 +889,35 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en
 }
 
 /* helper function that simply writes a buffer to the flash */
-static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf, 
-					int len) 
+static int write_data_to_flash_mem(struct denali_nand_info *denali,
+							const uint8_t *buf,
+							int len)
 {
 	uint32_t i = 0, *buf32;
 
-	/* verify that the len is a multiple of 4. see comment in 
-	 * read_data_from_flash_mem() */	
+	/* verify that the len is a multiple of 4. see comment in
+	 * read_data_from_flash_mem() */
 	BUG_ON((len % 4) != 0);
 
 	/* write the data to the flash memory */
 	buf32 = (uint32_t *)buf;
 	for (i = 0; i < len / 4; i++)
-	{
 		denali_write32(*buf32++, denali->flash_mem + 0x10);
-	}
-	return i*4; /* intent is to return the number of bytes read */ 
+	return i*4; /* intent is to return the number of bytes read */
 }
 
 /* helper function that simply reads a buffer from the flash */
-static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf, 
-					int len)
+static int read_data_from_flash_mem(struct denali_nand_info *denali,
+								uint8_t *buf,
+								int len)
 {
 	uint32_t i = 0, *buf32;
 
 	/* we assume that len will be a multiple of 4, if not
 	 * it would be nice to know about it ASAP rather than
-	 * have random failures... 
-         *	
-	 * This assumption is based on the fact that this 
-	 * function is designed to be used to read flash pages, 
+	 * have random failures...
+	 * This assumption is based on the fact that this
+	 * function is designed to be used to read flash pages,
 	 * which are typically multiples of 4...
 	 */
 
@@ -1242,10 +926,8 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *bu
 	/* transfer the data from the flash */
 	buf32 = (uint32_t *)buf;
 	for (i = 0; i < len / 4; i++)
-	{
 		*buf32++ = ioread32(denali->flash_mem + 0x10);
-	}
-	return i*4; /* intent is to return the number of bytes read */ 
+	return i*4; /* intent is to return the number of bytes read */
 }
 
 /* writes OOB data to the device */
@@ -1253,38 +935,35 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP | 
+	uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP |
 						INTR_STATUS0__PROGRAM_FAIL;
 	int status = 0;
 
 	denali->page = page;
 
-	if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, 
-							DENALI_WRITE) == PASS) 
-	{
+	if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
+							DENALI_WRITE) == PASS) {
 		write_data_to_flash_mem(denali, buf, mtd->oobsize);
 
 #if DEBUG_DENALI
 		spin_lock_irq(&denali->irq_lock);
-		denali->irq_debug_array[denali->idx++] = 0x80000000 | mtd->oobsize;
+		denali->irq_debug_array[denali->idx++] =
+			0x80000000 | mtd->oobsize;
 		denali->idx %= 32;
 		spin_unlock_irq(&denali->irq_lock);
 #endif
 
-	
+
 		/* wait for operation to complete */
 		irq_status = wait_for_irq(denali, irq_mask);
 
-		if (irq_status == 0)
-		{
+		if (irq_status == 0) {
 			printk(KERN_ERR "OOB write failed\n");
 			status = -EIO;
 		}
-	}
-	else 
-	{ 	
+	} else {
 		printk(KERN_ERR "unable to send pipeline command\n");
-		status = -EIO; 
+		status = -EIO;
 	}
 	return status;
 }
@@ -1293,60 +972,56 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
-	uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0;
+	uint32_t irq_mask = INTR_STATUS0__LOAD_COMP,
+			 irq_status = 0, addr = 0x0, cmd = 0x0;
 
 	denali->page = page;
 
 #if DEBUG_DENALI
-	printk("read_oob %d\n", page);
+	printk(KERN_INFO "read_oob %d\n", page);
 #endif
-	if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, 
-							DENALI_READ) == PASS) 
-	{
-		read_data_from_flash_mem(denali, buf, mtd->oobsize);	
+	if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
+							DENALI_READ) == PASS) {
+		read_data_from_flash_mem(denali, buf, mtd->oobsize);
 
-		/* wait for command to be accepted  
+		/* wait for command to be accepted
 		 * can always use status0 bit as the mask is identical for each
 		 * bank. */
 		irq_status = wait_for_irq(denali, irq_mask);
 
 		if (irq_status == 0)
-		{
-			printk(KERN_ERR "page on OOB timeout %d\n", denali->page);
-		}
+			printk(KERN_ERR "page on OOB timeout %d\n",
+					denali->page);
 
 		/* We set the device back to MAIN_ACCESS here as I observed
 		 * instability with the controller if you do a block erase
 		 * and the last transaction was a SPARE_ACCESS. Block erase
 		 * is reliable (according to the MTD test infrastructure)
-		 * if you are in MAIN_ACCESS. 
+		 * if you are in MAIN_ACCESS.
 		 */
 		addr = BANK(denali->flash_bank) | denali->page;
-		cmd = MODE_10 | addr; 
+		cmd = MODE_10 | addr;
 		index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
 
 #if DEBUG_DENALI
 		spin_lock_irq(&denali->irq_lock);
-		denali->irq_debug_array[denali->idx++] = 0x60000000 | mtd->oobsize;
+		denali->irq_debug_array[denali->idx++] =
+			0x60000000 | mtd->oobsize;
 		denali->idx %= 32;
 		spin_unlock_irq(&denali->irq_lock);
 #endif
 	}
 }
 
-/* this function examines buffers to see if they contain data that 
+/* this function examines buffers to see if they contain data that
  * indicate that the buffer is part of an erased region of flash.
  */
 bool is_erased(uint8_t *buf, int len)
 {
 	int i = 0;
 	for (i = 0; i < len; i++)
-	{	
 		if (buf[i] != 0xFF)
-		{
 			return false;
-		}
-	}
 	return true;
 }
 #define ECC_SECTOR_SIZE 512
@@ -1358,65 +1033,59 @@ bool is_erased(uint8_t *buf, int len)
 #define ECC_ERR_DEVICE(x)	((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8)
 #define ECC_LAST_ERR(x)		((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
 
-static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, 
+static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
 			uint8_t *oobbuf, uint32_t irq_status)
 {
 	bool check_erased_page = false;
 
-	if (irq_status & INTR_STATUS0__ECC_ERR)
-	{
+	if (irq_status & INTR_STATUS0__ECC_ERR) {
 		/* read the ECC errors. we'll ignore them for now */
 		uint32_t err_address = 0, err_correction_info = 0;
 		uint32_t err_byte = 0, err_sector = 0, err_device = 0;
 		uint32_t err_correction_value = 0;
 
-		do 
-		{
-			err_address = ioread32(denali->flash_reg + 
+		do {
+			err_address = ioread32(denali->flash_reg +
 						ECC_ERROR_ADDRESS);
 			err_sector = ECC_SECTOR(err_address);
 			err_byte = ECC_BYTE(err_address);
 
 
-			err_correction_info = ioread32(denali->flash_reg + 
+			err_correction_info = ioread32(denali->flash_reg +
 						ERR_CORRECTION_INFO);
-			err_correction_value = 
+			err_correction_value =
 				ECC_CORRECTION_VALUE(err_correction_info);
 			err_device = ECC_ERR_DEVICE(err_correction_info);
 
-			if (ECC_ERROR_CORRECTABLE(err_correction_info))
-			{
+			if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
 				/* offset in our buffer is computed as:
-				   sector number * sector size + offset in 
+				   sector number * sector size + offset in
 				   sector
 				 */
-				int offset = err_sector * ECC_SECTOR_SIZE + 
+				int offset = err_sector * ECC_SECTOR_SIZE +
 								err_byte;
-				if (offset < denali->mtd.writesize)
-				{
+				if (offset < denali->mtd.writesize) {
 					/* correct the ECC error */
 					buf[offset] ^= err_correction_value;
 					denali->mtd.ecc_stats.corrected++;
-				}
-				else
-				{
+				} else {
 					/* bummer, couldn't correct the error */
 					printk(KERN_ERR "ECC offset invalid\n");
 					denali->mtd.ecc_stats.failed++;
 				}
-			}
-			else
-			{
-				/* if the error is not correctable, need to 
-				 * look at the page to see if it is an erased page.
-				 * if so, then it's not a real ECC error */	
+			} else {
+				/* if the error is not correctable, need to
+				 * look at the page to see if it is an erased
+				 * page. if so, then it's not a real ECC error
+				 * */
 				check_erased_page = true;
 			}
 
-#if DEBUG_DENALI 
-			printk("Detected ECC error in page %d: err_addr = 0x%08x,"
-				" info to fix is 0x%08x\n", denali->page, err_address, 
-				err_correction_info);
+#if DEBUG_DENALI
+			printk(KERN_INFO "Detected ECC error in page %d:"
+					" err_addr = 0x%08x, info to fix is"
+					" 0x%08x\n", denali->page, err_address,
+					err_correction_info);
 #endif
 		} while (!ECC_LAST_ERR(err_correction_info));
 	}
@@ -1428,7 +1097,8 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en)
 {
 	uint32_t reg_val = 0x0;
 
-	if (en) reg_val = DMA_ENABLE__FLAG;
+	if (en)
+		reg_val = DMA_ENABLE__FLAG;
 
 	denali_write32(reg_val, denali->flash_reg + DMA_ENABLE);
 	ioread32(denali->flash_reg + DMA_ENABLE);
@@ -1458,9 +1128,9 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
 	index_addr(denali, mode | 0x14000, 0x2400);
 }
 
-/* writes a page. user specifies type, and this function handles the 
+/* writes a page. user specifies type, and this function handles the
    configuration details. */
-static void write_page(struct mtd_info *mtd, struct nand_chip *chip, 
+static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
 			const uint8_t *buf, bool raw_xfer)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
@@ -1470,7 +1140,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
 
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP | 
+	uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP |
 						INTR_STATUS0__PROGRAM_FAIL;
 
 	/* if it is a raw xfer, we want to disable ecc, and send
@@ -1483,74 +1153,73 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	/* copy buffer into DMA buffer */
 	memcpy(denali->buf.buf, buf, mtd->writesize);
 
-	if (raw_xfer)
-	{
+	if (raw_xfer) {
 		/* transfer the data to the spare area */
-		memcpy(denali->buf.buf + mtd->writesize, 
-			chip->oob_poi, 
-			mtd->oobsize); 
+		memcpy(denali->buf.buf + mtd->writesize,
+			chip->oob_poi,
+			mtd->oobsize);
 	}
 
 	pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE);
 
 	clear_interrupts(denali);
-	denali_enable_dma(denali, true);	
+	denali_enable_dma(denali, true);
 
 	denali_setup_dma(denali, DENALI_WRITE);
 
 	/* wait for operation to complete */
 	irq_status = wait_for_irq(denali, irq_mask);
 
-	if (irq_status == 0)
-	{
-		printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer);
-		denali->status = 
-	   	   (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL : 
-						   	     PASS;
+	if (irq_status == 0) {
+		printk(KERN_ERR "timeout on write_page"
+				" (type = %d)\n", raw_xfer);
+		denali->status =
+			(irq_status & INTR_STATUS0__PROGRAM_FAIL) ?
+			NAND_STATUS_FAIL : PASS;
 	}
 
-	denali_enable_dma(denali, false);	
+	denali_enable_dma(denali, false);
 	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE);
 }
 
 /* NAND core entry points */
 
-/* this is the callback that the NAND core calls to write a page. Since 
-   writing a page with ECC or without is similar, all the work is done 
+/* this is the callback that the NAND core calls to write a page. Since
+   writing a page with ECC or without is similar, all the work is done
    by write_page above.   */
-static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, 
+static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 				const uint8_t *buf)
 {
 	/* for regular page writes, we let HW handle all the ECC
-         * data written to the device. */
+	 * data written to the device. */
 	write_page(mtd, chip, buf, false);
 }
 
-/* This is the callback that the NAND core calls to write a page without ECC. 
+/* This is the callback that the NAND core calls to write a page without ECC.
    raw access is similiar to ECC page writes, so all the work is done in the
-   write_page() function above. 
+   write_page() function above.
  */
-static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 
+static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 					const uint8_t *buf)
 {
-	/* for raw page writes, we want to disable ECC and simply write 
+	/* for raw page writes, we want to disable ECC and simply write
 	   whatever data is in the buffer. */
 	write_page(mtd, chip, buf, true);
 }
 
-static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, 
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
 			    int page)
 {
-	return write_oob_data(mtd, chip->oob_poi, page);	
+	return write_oob_data(mtd, chip->oob_poi, page);
 }
 
-static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, 
+static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 			   int page, int sndcmd)
 {
 	read_oob_data(mtd, chip->oob_poi, page);
 
-	return 0; /* notify NAND core to send command to 
-                   * NAND device. */
+	return 0; /* notify NAND core to send command to
+			   NAND device. */
 }
 
 static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
@@ -1563,7 +1232,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
 
 	uint32_t irq_status = 0;
-	uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE | 
+	uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE |
 			    INTR_STATUS0__ECC_ERR;
 	bool check_erased_page = false;
 
@@ -1581,26 +1250,20 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
 
 	memcpy(buf, denali->buf.buf, mtd->writesize);
-	
+
 	check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
 	denali_enable_dma(denali, false);
 
-	if (check_erased_page)
-	{
+	if (check_erased_page) {
 		read_oob_data(&denali->mtd, chip->oob_poi, denali->page);
 
 		/* check ECC failures that may have occurred on erased pages */
-		if (check_erased_page)
-		{
+		if (check_erased_page) {
 			if (!is_erased(buf, denali->mtd.writesize))
-			{
 				denali->mtd.ecc_stats.failed++;
-			}
 			if (!is_erased(buf, denali->mtd.oobsize))
-			{
 				denali->mtd.ecc_stats.failed++;
-			}
-		}	
+		}
 	}
 	return 0;
 }
@@ -1616,7 +1279,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 
 	uint32_t irq_status = 0;
 	uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;
-						
+
 	setup_ecc_for_xfer(denali, false, true);
 	denali_enable_dma(denali, true);
 
@@ -1644,12 +1307,10 @@ static uint8_t denali_read_byte(struct mtd_info *mtd)
 	uint8_t result = 0xff;
 
 	if (denali->buf.head < denali->buf.tail)
-	{
 		result = denali->buf.buf[denali->buf.head++];
-	}
 
 #if DEBUG_DENALI
-	printk("read byte -> 0x%02x\n", result);
+	printk(KERN_INFO "read byte -> 0x%02x\n", result);
 #endif
 	return result;
 }
@@ -1658,7 +1319,7 @@ static void denali_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 #if DEBUG_DENALI
-	printk("denali select chip %d\n", chip);
+	printk(KERN_INFO "denali select chip %d\n", chip);
 #endif
 	spin_lock_irq(&denali->irq_lock);
 	denali->flash_bank = chip;
@@ -1672,7 +1333,7 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
 	denali->status = 0;
 
 #if DEBUG_DENALI
-	printk("waitfunc %d\n", status);
+	printk(KERN_INFO "waitfunc %d\n", status);
 #endif
 	return status;
 }
@@ -1684,76 +1345,74 @@ static void denali_erase(struct mtd_info *mtd, int page)
 	uint32_t cmd = 0x0, irq_status = 0;
 
 #if DEBUG_DENALI
-	printk("erase page: %d\n", page);
+	printk(KERN_INFO "erase page: %d\n", page);
 #endif
 	/* clear interrupts */
-	clear_interrupts(denali);	
+	clear_interrupts(denali);
 
 	/* setup page read request for access type */
 	cmd = MODE_10 | BANK(denali->flash_bank) | page;
 	index_addr(denali, (uint32_t)cmd, 0x1);
 
 	/* wait for erase to complete or failure to occur */
-	irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP | 
+	irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
 					INTR_STATUS0__ERASE_FAIL);
 
-	denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL : 
-								 PASS;
+	denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ?
+						NAND_STATUS_FAIL : PASS;
 }
 
-static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, 
+static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
 			   int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
+	uint32_t addr, id;
+	int i;
 
 #if DEBUG_DENALI
-	printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
+	printk(KERN_INFO "cmdfunc: 0x%x %d %d\n", cmd, col, page);
 #endif
-	switch (cmd)
-	{ 
-		case NAND_CMD_PAGEPROG:
-			break;
-		case NAND_CMD_STATUS:
-			read_status(denali);
-			break;
-		case NAND_CMD_READID:
-			reset_buf(denali);
-			if (denali->flash_bank < denali->total_used_banks)
-			{
-				/* write manufacturer information into nand 
-				   buffer for NAND subsystem to fetch.
-  			         */ 
-	                        write_byte_to_buf(denali, denali->dev_info.wDeviceMaker);
-	                        write_byte_to_buf(denali, denali->dev_info.wDeviceID);
-	                        write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
-	                        write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
-	                        write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
-			}
-			else 
-			{
-				int i;
-				for (i = 0; i < 5; i++) 
-					write_byte_to_buf(denali, 0xff);
-			}
-			break;
-		case NAND_CMD_READ0:
-		case NAND_CMD_SEQIN:
-			denali->page = page;
-			break;
-		case NAND_CMD_RESET:
-			reset_bank(denali);
-			break;
-		case NAND_CMD_READOOB:
-			/* TODO: Read OOB data */
-			break;
-		default:
-			printk(KERN_ERR ": unsupported command received 0x%x\n", cmd);
-			break;
+	switch (cmd) {
+	case NAND_CMD_PAGEPROG:
+		break;
+	case NAND_CMD_STATUS:
+		read_status(denali);
+		break;
+	case NAND_CMD_READID:
+		reset_buf(denali);
+		/*sometimes ManufactureId read from register is not right
+		 * e.g. some of Micron MT29F32G08QAA MLC NAND chips
+		 * So here we send READID cmd to NAND insteand
+		 * */
+		addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
+		index_addr(denali, (uint32_t)addr | 0, 0x90);
+		index_addr(denali, (uint32_t)addr | 1, 0);
+		for (i = 0; i < 5; i++) {
+			index_addr_read_data(denali,
+						(uint32_t)addr | 2,
+						&id);
+			write_byte_to_buf(denali, id);
+		}
+		break;
+	case NAND_CMD_READ0:
+	case NAND_CMD_SEQIN:
+		denali->page = page;
+		break;
+	case NAND_CMD_RESET:
+		reset_bank(denali);
+		break;
+	case NAND_CMD_READOOB:
+		/* TODO: Read OOB data */
+		break;
+	default:
+		printk(KERN_ERR ": unsupported command"
+				" received 0x%x\n", cmd);
+		break;
 	}
 }
 
 /* stubs for ECC functions not used by the NAND core */
-static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, 
+static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
 				uint8_t *ecc_code)
 {
 	printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n");
@@ -1761,7 +1420,7 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
 	return -EIO;
 }
 
-static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, 
+static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
 				uint8_t *read_ecc, uint8_t *calc_ecc)
 {
 	printk(KERN_ERR "denali_ecc_correct called unexpectedly\n");
@@ -1779,10 +1438,18 @@ static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
 /* Initialization code to bring the device up to a known good state */
 static void denali_hw_init(struct denali_nand_info *denali)
 {
+	/* tell driver how many bit controller will skip before
+	 * writing ECC code in OOB, this register may be already
+	 * set by firmware. So we read this value out.
+	 * if this value is 0, just let it be.
+	 * */
+	denali->bbtskipbytes = ioread32(denali->flash_reg +
+						SPARE_AREA_SKIP_BYTES);
 	denali_irq_init(denali);
-	NAND_Flash_Reset(denali);
+	denali_nand_reset(denali);
 	denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
-	denali_write32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+	denali_write32(CHIP_EN_DONT_CARE__FLAG,
+			denali->flash_reg + CHIP_ENABLE_DONT_CARE);
 
 	denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES);
 	denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
@@ -1792,25 +1459,18 @@ static void denali_hw_init(struct denali_nand_info *denali)
 	denali_write32(1, denali->flash_reg + ECC_ENABLE);
 }
 
-/* ECC layout for SLC devices. Denali spec indicates SLC fixed at 4 bytes */
-#define ECC_BYTES_SLC   4 * (2048 / ECC_SECTOR_SIZE)
-static struct nand_ecclayout nand_oob_slc = {
-	.eccbytes = 4,
-	.eccpos = { 0, 1, 2, 3 }, /* not used */
-	.oobfree = {{ 
-			.offset = ECC_BYTES_SLC, 
-			.length = 64 - ECC_BYTES_SLC  
-		   }}
+/* Althogh controller spec said SLC ECC is forceb to be 4bit,
+ * but denali controller in MRST only support 15bit and 8bit ECC
+ * correction
+ * */
+#define ECC_8BITS	14
+static struct nand_ecclayout nand_8bit_oob = {
+	.eccbytes = 14,
 };
 
-#define ECC_BYTES_MLC   14 * (2048 / ECC_SECTOR_SIZE)
-static struct nand_ecclayout nand_oob_mlc_14bit = {
-	.eccbytes = 14,
-	.eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
-	.oobfree = {{ 
-			.offset = ECC_BYTES_MLC, 
-			.length = 64 - ECC_BYTES_MLC  
-		   }}
+#define ECC_15BITS	26
+static struct nand_ecclayout nand_15bit_oob = {
+	.eccbytes = 26,
 };
 
 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -1842,12 +1502,12 @@ void denali_drv_init(struct denali_nand_info *denali)
 	denali->idx = 0;
 
 	/* setup interrupt handler */
-	/* the completion object will be used to notify 
+	/* the completion object will be used to notify
 	 * the callee that the interrupt is done */
 	init_completion(&denali->complete);
 
 	/* the spinlock will be used to synchronize the ISR
-	 * with any element that might be access shared 
+	 * with any element that might be access shared
 	 * data (interrupt status) */
 	spin_lock_init(&denali->irq_lock);
 
@@ -1880,13 +1540,12 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	if (id->driver_data == INTEL_CE4100) {
-		/* Due to a silicon limitation, we can only support 
-		 * ONFI timing mode 1 and below. 
-		 */ 
-		if (onfi_timing_mode < -1 || onfi_timing_mode > 1)
-		{
-			printk("Intel CE4100 only supports ONFI timing mode 1 "
-				"or below\n");
+		/* Due to a silicon limitation, we can only support
+		 * ONFI timing mode 1 and below.
+		 */
+		if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
+			printk(KERN_ERR "Intel CE4100 only supports"
+					" ONFI timing mode 1 or below\n");
 			ret = -EINVAL;
 			goto failed_enable;
 		}
@@ -1905,7 +1564,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			mem_base = csr_base + csr_len;
 			mem_len = csr_len;
 			nand_dbg_print(NAND_DBG_WARN,
-				       "Spectra: No second BAR for PCI device; assuming %08Lx\n",
+				       "Spectra: No second"
+					   " BAR for PCI device;"
+					   " assuming %08Lx\n",
 				       (uint64_t)csr_base);
 		}
 	}
@@ -1913,16 +1574,16 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Is 32-bit DMA supported? */
 	ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
 
-	if (ret)
-	{
+	if (ret) {
 		printk(KERN_ERR "Spectra: no usable DMA configuration\n");
 		goto failed_enable;
 	}
-	denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE, 
-					 PCI_DMA_BIDIRECTIONAL);
+	denali->buf.dma_buf =
+		pci_map_single(dev, denali->buf.buf,
+						DENALI_BUF_SIZE,
+						PCI_DMA_BIDIRECTIONAL);
 
-	if (pci_dma_mapping_error(dev, denali->buf.dma_buf))
-	{
+	if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
 		printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
 		goto failed_enable;
 	}
@@ -1970,22 +1631,11 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* now that our ISR is registered, we can enable interrupts */
-	NAND_LLD_Enable_Disable_Interrupts(denali, true);
+	denali_set_intr_modes(denali, true);
 
 	pci_set_drvdata(dev, denali);
 
-	NAND_Read_Device_ID(denali);
-
-	/* MTD supported page sizes vary by kernel. We validate our 
-           kernel supports the device here.
-	 */
-	if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
-	{
-		ret = -ENODEV;
-		printk(KERN_ERR "Spectra: device size not supported by this "
-			"version of MTD.");
-		goto failed_nand;
-	}
+	denali_nand_timing_set(denali);
 
 	nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
 			"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
@@ -2009,18 +1659,46 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	denali->nand.read_byte = denali_read_byte;
 	denali->nand.waitfunc = denali_waitfunc;
 
-	/* scan for NAND devices attached to the controller 
+	/* scan for NAND devices attached to the controller
 	 * this is the first stage in a two step process to register
-	 * with the nand subsystem */	
-	if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL))
-	{
+	 * with the nand subsystem */
+	if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) {
 		ret = -ENXIO;
 		goto failed_nand;
 	}
-	
-	/* second stage of the NAND scan 
-	 * this stage requires information regarding ECC and 
-         * bad block management. */
+
+	/* MTD supported page sizes vary by kernel. We validate our
+	 * kernel supports the device here.
+	 */
+	if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
+		ret = -ENODEV;
+		printk(KERN_ERR "Spectra: device size not supported by this "
+			"version of MTD.");
+		goto failed_nand;
+	}
+
+	/* support for multi nand
+	 * MTD known nothing about multi nand,
+	 * so we should tell it the real pagesize
+	 * and anything necessery
+	 */
+	denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+	denali->nand.chipsize <<= (denali->devnum - 1);
+	denali->nand.page_shift += (denali->devnum - 1);
+	denali->nand.pagemask = (denali->nand.chipsize >>
+						denali->nand.page_shift) - 1;
+	denali->nand.bbt_erase_shift += (denali->devnum - 1);
+	denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift;
+	denali->nand.chip_shift += (denali->devnum - 1);
+	denali->mtd.writesize <<= (denali->devnum - 1);
+	denali->mtd.oobsize <<= (denali->devnum - 1);
+	denali->mtd.erasesize <<= (denali->devnum - 1);
+	denali->mtd.size = denali->nand.numchips * denali->nand.chipsize;
+	denali->bbtskipbytes *= denali->devnum;
+
+	/* second stage of the NAND scan
+	 * this stage requires information regarding ECC and
+	 * bad block management. */
 
 	/* Bad block management */
 	denali->nand.bbt_td = &bbt_main_descr;
@@ -2030,26 +1708,57 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
 	denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
 
-	if (denali->dev_info.MLCDevice)
-	{
-		denali->nand.ecc.layout = &nand_oob_mlc_14bit;
-		denali->nand.ecc.bytes = ECC_BYTES_MLC;
-	}
-	else /* SLC */
-	{
-		denali->nand.ecc.layout = &nand_oob_slc;
-		denali->nand.ecc.bytes = ECC_BYTES_SLC;
+	/* Denali Controller only support 15bit and 8bit ECC in MRST,
+	 * so just let controller do 15bit ECC for MLC and 8bit ECC for
+	 * SLC if possible.
+	 * */
+	if (denali->nand.cellinfo & 0xc &&
+			(denali->mtd.oobsize > (denali->bbtskipbytes +
+			ECC_15BITS * (denali->mtd.writesize /
+			ECC_SECTOR_SIZE)))) {
+		/* if MLC OOB size is large enough, use 15bit ECC*/
+		denali->nand.ecc.layout = &nand_15bit_oob;
+		denali->nand.ecc.bytes = ECC_15BITS;
+		denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+	} else if (denali->mtd.oobsize < (denali->bbtskipbytes +
+			ECC_8BITS * (denali->mtd.writesize /
+			ECC_SECTOR_SIZE))) {
+		printk(KERN_ERR "Your NAND chip OOB is not large enough to"
+				" contain 8bit ECC correction codes");
+		goto failed_nand;
+	} else {
+		denali->nand.ecc.layout = &nand_8bit_oob;
+		denali->nand.ecc.bytes = ECC_8BITS;
+		denali_write32(8, denali->flash_reg + ECC_CORRECTION);
 	}
 
-	/* These functions are required by the NAND core framework, otherwise, 
-           the NAND core will assert. However, we don't need them, so we'll stub 
-           them out. */
+	denali->nand.ecc.bytes *= denali->devnum;
+	denali->nand.ecc.layout->eccbytes *=
+		denali->mtd.writesize / ECC_SECTOR_SIZE;
+	denali->nand.ecc.layout->oobfree[0].offset =
+		denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
+	denali->nand.ecc.layout->oobfree[0].length =
+		denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes -
+		denali->bbtskipbytes;
+
+	/* Let driver know the total blocks number and
+	 * how many blocks contained by each nand chip.
+	 * blksperchip will help driver to know how many
+	 * blocks is taken by FW.
+	 * */
+	denali->totalblks = denali->mtd.size >>
+				denali->nand.phys_erase_shift;
+	denali->blksperchip = denali->totalblks / denali->nand.numchips;
+
+	/* These functions are required by the NAND core framework, otherwise,
+	 * the NAND core will assert. However, we don't need them, so we'll stub
+	 * them out. */
 	denali->nand.ecc.calculate = denali_ecc_calculate;
 	denali->nand.ecc.correct = denali_ecc_correct;
 	denali->nand.ecc.hwctl = denali_ecc_hwctl;
 
 	/* override the default read operations */
-	denali->nand.ecc.size = denali->mtd.writesize;
+	denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
 	denali->nand.ecc.read_page = denali_read_page;
 	denali->nand.ecc.read_page_raw = denali_read_page_raw;
 	denali->nand.ecc.write_page = denali_write_page;
@@ -2058,15 +1767,15 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	denali->nand.ecc.write_oob = denali_write_oob;
 	denali->nand.erase_cmd = denali_erase;
 
-	if (nand_scan_tail(&denali->mtd))
-	{
+	if (nand_scan_tail(&denali->mtd)) {
 		ret = -ENXIO;
 		goto failed_nand;
 	}
 
 	ret = add_mtd_device(&denali->mtd);
 	if (ret) {
-		printk(KERN_ERR "Spectra: Failed to register MTD device: %d\n", ret);
+		printk(KERN_ERR "Spectra: Failed to register"
+				" MTD device: %d\n", ret);
 		goto failed_nand;
 	}
 	return 0;
@@ -2079,7 +1788,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
  failed_remap_csr:
 	pci_release_regions(dev);
  failed_req_csr:
-	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, 
+	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
 							PCI_DMA_BIDIRECTIONAL);
  failed_enable:
 	kfree(denali);
@@ -2103,7 +1812,7 @@ static void denali_pci_remove(struct pci_dev *dev)
 	iounmap(denali->flash_mem);
 	pci_release_regions(dev);
 	pci_disable_device(dev);
-	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, 
+	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
 							PCI_DMA_BIDIRECTIONAL);
 	pci_set_drvdata(dev, NULL);
 	kfree(denali);
@@ -2120,7 +1829,8 @@ static struct pci_driver denali_pci_driver = {
 
 static int __devinit denali_init(void)
 {
-	printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
+	printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n",
+			__DATE__, __TIME__);
 	return pci_register_driver(&denali_pci_driver);
 }
 
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 422a29ab2f60..b680474e6333 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -17,7 +17,7 @@
  *
  */
 
-#include <linux/mtd/nand.h> 
+#include <linux/mtd/nand.h>
 
 #define DEVICE_RESET				0x0
 #define     DEVICE_RESET__BANK0				0x0001
@@ -29,7 +29,7 @@
 #define     TRANSFER_SPARE_REG__FLAG			0x0001
 
 #define LOAD_WAIT_CNT				0x20
-#define     LOAD_WAIT_CNT__VALUE				0xffff
+#define     LOAD_WAIT_CNT__VALUE			0xffff
 
 #define PROGRAM_WAIT_CNT			0x30
 #define     PROGRAM_WAIT_CNT__VALUE			0xffff
@@ -83,7 +83,7 @@
 #define RE_2_WE					0x120
 #define     RE_2_WE__VALUE				0x003f
 
-#define ACC_CLKS    				0x130
+#define ACC_CLKS				0x130
 #define     ACC_CLKS__VALUE				0x000f
 
 #define NUMBER_OF_PLANES			0x140
@@ -140,7 +140,7 @@
 #define DEVICES_CONNECTED			0x250
 #define     DEVICES_CONNECTED__VALUE			0x0007
 
-#define DIE_MASK					0x260
+#define DIE_MASK				0x260
 #define     DIE_MASK__VALUE				0x00ff
 
 #define FIRST_BLOCK_OF_NEXT_PLANE		0x270
@@ -152,7 +152,7 @@
 #define RE_2_RE					0x290
 #define     RE_2_RE__VALUE				0x003f
 
-#define MANUFACTURER_ID			0x300
+#define MANUFACTURER_ID				0x300
 #define     MANUFACTURER_ID__VALUE			0x00ff
 
 #define DEVICE_ID				0x310
@@ -173,13 +173,13 @@
 #define LOGICAL_PAGE_SPARE_SIZE			0x360
 #define     LOGICAL_PAGE_SPARE_SIZE__VALUE		0xffff
 
-#define REVISION					0x370
+#define REVISION				0x370
 #define     REVISION__VALUE				0xffff
 
 #define ONFI_DEVICE_FEATURES			0x380
 #define     ONFI_DEVICE_FEATURES__VALUE			0x003f
 
-#define ONFI_OPTIONAL_COMMANDS		0x390
+#define ONFI_OPTIONAL_COMMANDS			0x390
 #define     ONFI_OPTIONAL_COMMANDS__VALUE		0x003f
 
 #define ONFI_TIMING_MODE			0x3a0
@@ -201,12 +201,12 @@
 #define FEATURES					0x3f0
 #define     FEATURES__N_BANKS				0x0003
 #define     FEATURES__ECC_MAX_ERR			0x003c
-#define     FEATURES__DMA					0x0040
+#define     FEATURES__DMA				0x0040
 #define     FEATURES__CMD_DMA				0x0080
 #define     FEATURES__PARTITION				0x0100
 #define     FEATURES__XDMA_SIDEBAND			0x0200
 #define     FEATURES__GPREG				0x0400
-#define     FEATURES__INDEX_ADDR				0x0800
+#define     FEATURES__INDEX_ADDR			0x0800
 
 #define TRANSFER_MODE				0x400
 #define     TRANSFER_MODE__VALUE			0x0003
@@ -235,12 +235,12 @@
 #define     INTR_EN0__DMA_CMD_COMP			0x0004
 #define     INTR_EN0__TIME_OUT				0x0008
 #define     INTR_EN0__PROGRAM_FAIL			0x0010
-#define     INTR_EN0__ERASE_FAIL				0x0020
+#define     INTR_EN0__ERASE_FAIL			0x0020
 #define     INTR_EN0__LOAD_COMP				0x0040
 #define     INTR_EN0__PROGRAM_COMP			0x0080
-#define     INTR_EN0__ERASE_COMP				0x0100
+#define     INTR_EN0__ERASE_COMP			0x0100
 #define     INTR_EN0__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN0__LOCKED_BLK				0x0400
+#define     INTR_EN0__LOCKED_BLK			0x0400
 #define     INTR_EN0__UNSUP_CMD				0x0800
 #define     INTR_EN0__INT_ACT				0x1000
 #define     INTR_EN0__RST_COMP				0x2000
@@ -253,7 +253,7 @@
 #define ERR_PAGE_ADDR0				0x440
 #define     ERR_PAGE_ADDR0__VALUE			0xffff
 
-#define ERR_BLOCK_ADDR0			0x450
+#define ERR_BLOCK_ADDR0				0x450
 #define     ERR_BLOCK_ADDR0__VALUE			0xffff
 
 #define INTR_STATUS1				0x460
@@ -280,12 +280,12 @@
 #define     INTR_EN1__DMA_CMD_COMP			0x0004
 #define     INTR_EN1__TIME_OUT				0x0008
 #define     INTR_EN1__PROGRAM_FAIL			0x0010
-#define     INTR_EN1__ERASE_FAIL				0x0020
+#define     INTR_EN1__ERASE_FAIL			0x0020
 #define     INTR_EN1__LOAD_COMP				0x0040
 #define     INTR_EN1__PROGRAM_COMP			0x0080
-#define     INTR_EN1__ERASE_COMP				0x0100
+#define     INTR_EN1__ERASE_COMP			0x0100
 #define     INTR_EN1__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN1__LOCKED_BLK				0x0400
+#define     INTR_EN1__LOCKED_BLK			0x0400
 #define     INTR_EN1__UNSUP_CMD				0x0800
 #define     INTR_EN1__INT_ACT				0x1000
 #define     INTR_EN1__RST_COMP				0x2000
@@ -298,7 +298,7 @@
 #define ERR_PAGE_ADDR1				0x490
 #define     ERR_PAGE_ADDR1__VALUE			0xffff
 
-#define ERR_BLOCK_ADDR1			0x4a0
+#define ERR_BLOCK_ADDR1				0x4a0
 #define     ERR_BLOCK_ADDR1__VALUE			0xffff
 
 #define INTR_STATUS2				0x4b0
@@ -325,12 +325,12 @@
 #define     INTR_EN2__DMA_CMD_COMP			0x0004
 #define     INTR_EN2__TIME_OUT				0x0008
 #define     INTR_EN2__PROGRAM_FAIL			0x0010
-#define     INTR_EN2__ERASE_FAIL				0x0020
+#define     INTR_EN2__ERASE_FAIL			0x0020
 #define     INTR_EN2__LOAD_COMP				0x0040
 #define     INTR_EN2__PROGRAM_COMP			0x0080
-#define     INTR_EN2__ERASE_COMP				0x0100
+#define     INTR_EN2__ERASE_COMP			0x0100
 #define     INTR_EN2__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN2__LOCKED_BLK				0x0400
+#define     INTR_EN2__LOCKED_BLK			0x0400
 #define     INTR_EN2__UNSUP_CMD				0x0800
 #define     INTR_EN2__INT_ACT				0x1000
 #define     INTR_EN2__RST_COMP				0x2000
@@ -343,7 +343,7 @@
 #define ERR_PAGE_ADDR2				0x4e0
 #define     ERR_PAGE_ADDR2__VALUE			0xffff
 
-#define ERR_BLOCK_ADDR2			0x4f0
+#define ERR_BLOCK_ADDR2				0x4f0
 #define     ERR_BLOCK_ADDR2__VALUE			0xffff
 
 #define INTR_STATUS3				0x500
@@ -370,12 +370,12 @@
 #define     INTR_EN3__DMA_CMD_COMP			0x0004
 #define     INTR_EN3__TIME_OUT				0x0008
 #define     INTR_EN3__PROGRAM_FAIL			0x0010
-#define     INTR_EN3__ERASE_FAIL				0x0020
+#define     INTR_EN3__ERASE_FAIL			0x0020
 #define     INTR_EN3__LOAD_COMP				0x0040
 #define     INTR_EN3__PROGRAM_COMP			0x0080
-#define     INTR_EN3__ERASE_COMP				0x0100
+#define     INTR_EN3__ERASE_COMP			0x0100
 #define     INTR_EN3__PIPE_CPYBCK_CMD_COMP		0x0200
-#define     INTR_EN3__LOCKED_BLK				0x0400
+#define     INTR_EN3__LOCKED_BLK			0x0400
 #define     INTR_EN3__UNSUP_CMD				0x0800
 #define     INTR_EN3__INT_ACT				0x1000
 #define     INTR_EN3__RST_COMP				0x2000
@@ -388,7 +388,7 @@
 #define ERR_PAGE_ADDR3				0x530
 #define     ERR_PAGE_ADDR3__VALUE			0xffff
 
-#define ERR_BLOCK_ADDR3			0x540
+#define ERR_BLOCK_ADDR3				0x540
 #define     ERR_BLOCK_ADDR3__VALUE			0xffff
 
 #define DATA_INTR				0x550
@@ -412,9 +412,9 @@
 #define     GPREG_3__VALUE				0xffff
 
 #define ECC_THRESHOLD				0x600
-#define     ECC_THRESHOLD__VALUE				0x03ff
+#define     ECC_THRESHOLD__VALUE			0x03ff
 
-#define ECC_ERROR_BLOCK_ADDRESS		0x610
+#define ECC_ERROR_BLOCK_ADDRESS			0x610
 #define     ECC_ERROR_BLOCK_ADDRESS__VALUE		0xffff
 
 #define ECC_ERROR_PAGE_ADDRESS			0x620
@@ -466,7 +466,7 @@
 #define     CHNL_ACTIVE__CHANNEL3			0x0008
 
 #define ACTIVE_SRC_ID				0x800
-#define     ACTIVE_SRC_ID__VALUE				0x00ff
+#define     ACTIVE_SRC_ID__VALUE			0x00ff
 
 #define PTN_INTR					0x810
 #define     PTN_INTR__CONFIG_ERROR			0x0001
@@ -485,7 +485,7 @@
 #define     PTN_INTR_EN__REG_ACCESS_ERROR		0x0020
 
 #define PERM_SRC_ID_0				0x830
-#define     PERM_SRC_ID_0__SRCID				0x00ff
+#define     PERM_SRC_ID_0__SRCID			0x00ff
 #define     PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_0__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_0__READ_ACTIVE			0x4000
@@ -502,7 +502,7 @@
 #define     MIN_MAX_BANK_0__MAX_VALUE			0x000c
 
 #define PERM_SRC_ID_1				0x870
-#define     PERM_SRC_ID_1__SRCID				0x00ff
+#define     PERM_SRC_ID_1__SRCID			0x00ff
 #define     PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_1__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_1__READ_ACTIVE			0x4000
@@ -519,7 +519,7 @@
 #define     MIN_MAX_BANK_1__MAX_VALUE			0x000c
 
 #define PERM_SRC_ID_2				0x8b0
-#define     PERM_SRC_ID_2__SRCID				0x00ff
+#define     PERM_SRC_ID_2__SRCID			0x00ff
 #define     PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_2__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_2__READ_ACTIVE			0x4000
@@ -536,7 +536,7 @@
 #define     MIN_MAX_BANK_2__MAX_VALUE			0x000c
 
 #define PERM_SRC_ID_3				0x8f0
-#define     PERM_SRC_ID_3__SRCID				0x00ff
+#define     PERM_SRC_ID_3__SRCID			0x00ff
 #define     PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_3__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_3__READ_ACTIVE			0x4000
@@ -553,7 +553,7 @@
 #define     MIN_MAX_BANK_3__MAX_VALUE			0x000c
 
 #define PERM_SRC_ID_4				0x930
-#define     PERM_SRC_ID_4__SRCID				0x00ff
+#define     PERM_SRC_ID_4__SRCID			0x00ff
 #define     PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_4__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_4__READ_ACTIVE			0x4000
@@ -570,7 +570,7 @@
 #define     MIN_MAX_BANK_4__MAX_VALUE			0x000c
 
 #define PERM_SRC_ID_5				0x970
-#define     PERM_SRC_ID_5__SRCID				0x00ff
+#define     PERM_SRC_ID_5__SRCID			0x00ff
 #define     PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_5__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_5__READ_ACTIVE			0x4000
@@ -587,7 +587,7 @@
 #define     MIN_MAX_BANK_5__MAX_VALUE			0x000c
 
 #define PERM_SRC_ID_6				0x9b0
-#define     PERM_SRC_ID_6__SRCID				0x00ff
+#define     PERM_SRC_ID_6__SRCID			0x00ff
 #define     PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_6__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_6__READ_ACTIVE			0x4000
@@ -604,7 +604,7 @@
 #define     MIN_MAX_BANK_6__MAX_VALUE			0x000c
 
 #define PERM_SRC_ID_7				0x9f0
-#define     PERM_SRC_ID_7__SRCID				0x00ff
+#define     PERM_SRC_ID_7__SRCID			0x00ff
 #define     PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE		0x0800
 #define     PERM_SRC_ID_7__WRITE_ACTIVE			0x2000
 #define     PERM_SRC_ID_7__READ_ACTIVE			0x4000
@@ -620,47 +620,6 @@
 #define     MIN_MAX_BANK_7__MIN_VALUE			0x0003
 #define     MIN_MAX_BANK_7__MAX_VALUE			0x000c
 
-/* flash.h */
-struct device_info_tag {
-        uint16_t wDeviceMaker;
-        uint16_t wDeviceID;
-	uint8_t  bDeviceParam0;
-	uint8_t  bDeviceParam1;
-	uint8_t  bDeviceParam2;
-        uint32_t wDeviceType;
-        uint32_t wSpectraStartBlock;
-        uint32_t wSpectraEndBlock;
-        uint32_t wTotalBlocks;
-        uint16_t wPagesPerBlock;
-        uint16_t wPageSize;
-        uint16_t wPageDataSize;
-        uint16_t wPageSpareSize;
-        uint16_t wNumPageSpareFlag;
-        uint16_t wECCBytesPerSector;
-        uint32_t wBlockSize;
-        uint32_t wBlockDataSize;
-        uint32_t wDataBlockNum;
-        uint8_t bPlaneNum;
-        uint16_t wDeviceMainAreaSize;
-        uint16_t wDeviceSpareAreaSize;
-        uint16_t wDevicesConnected;
-        uint16_t wDeviceWidth;
-        uint16_t wHWRevision;
-        uint16_t wHWFeatures;
-
-        uint16_t wONFIDevFeatures;
-        uint16_t wONFIOptCommands;
-        uint16_t wONFITimingMode;
-        uint16_t wONFIPgmCacheTimingMode;
-
-        uint16_t MLCDevice;
-        uint16_t wSpareSkipBytes;
-
-        uint8_t nBitsInPageNumber;
-        uint8_t nBitsInPageDataSize;
-        uint8_t nBitsInBlockDataSize;
-};
-
 /* ffsdefs.h */
 #define CLEAR 0                 /*use this to clear a field instead of "fail"*/
 #define SET   1                 /*use this to set a field instead of "pass"*/
@@ -684,11 +643,11 @@ struct device_info_tag {
 #define NAND_DBG_TRACE 3
 
 #ifdef VERBOSE
-#define nand_dbg_print(level, args...)                  \
-        do {                                            \
-                if (level <= nand_debug_level)          \
-                        printk(KERN_ALERT args);        \
-        } while (0)
+#define nand_dbg_print(level, args...)				\
+	do {							\
+			if (level <= nand_debug_level)		\
+				printk(KERN_ALERT args);	\
+	} while (0)
 #else
 #define nand_dbg_print(level, args...)
 #endif
@@ -772,10 +731,9 @@ struct device_info_tag {
 #define ECC_SECTOR_SIZE     512
 #define LLD_MAX_FLASH_BANKS     4
 
-#define DENALI_BUF_SIZE		NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE
+#define DENALI_BUF_SIZE		(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
 
-struct nand_buf
-{
+struct nand_buf {
 	int head;
 	int tail;
 	uint8_t buf[DENALI_BUF_SIZE];
@@ -788,7 +746,6 @@ struct nand_buf
 struct denali_nand_info {
 	struct mtd_info mtd;
 	struct nand_chip nand;
-	struct device_info_tag dev_info;
 	int flash_bank; /* currently selected chip */
 	int status;
 	int platform;
@@ -806,11 +763,12 @@ struct denali_nand_info {
 	uint32_t irq_status;
 	int irq_debug_array[32];
 	int idx;
-};
 
-static uint16_t  NAND_Flash_Reset(struct denali_nand_info *denali);
-static uint16_t  NAND_Read_Device_ID(struct denali_nand_info *denali);
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, uint16_t INT_ENABLE);
+	uint32_t devnum;	/* represent how many nands connected */
+	uint32_t fwblks; /* represent how many blocks FW used */
+	uint32_t totalblks;
+	uint32_t blksperchip;
+	uint32_t bbtskipbytes;
+};
 
 #endif /*_LLD_NAND_*/
-
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 47067bc98248..b7f8de7b2780 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -29,7 +29,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/doc2000.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/inftl.h>
 
@@ -146,6 +145,7 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 	uint8_t parity;
 	uint16_t ds[4], s[5], tmp, errval[8], syn[4];
 
+	memset(syn, 0, sizeof(syn));
 	/* Convert the ecc bytes into words */
 	ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8);
 	ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6);
@@ -169,9 +169,9 @@ static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 			s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
 	}
 
-	/* Calc s[i] = s[i] / alpha^(v + i) */
+	/* Calc syn[i] = s[i] / alpha^(v + i) */
 	for (i = 0; i < NROOTS; i++) {
-		if (syn[i])
+		if (s[i])
 			syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
 	}
 	/* Call the decoder library */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 0d76b169482f..fcf8ceb277d4 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -39,60 +39,96 @@
 
 #define nfc_is_v21()		(cpu_is_mx25() || cpu_is_mx35())
 #define nfc_is_v1()		(cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
+#define nfc_is_v3_2()		cpu_is_mx51()
+#define nfc_is_v3()		nfc_is_v3_2()
 
 /* Addresses for NFC registers */
-#define NFC_BUF_SIZE		0xE00
-#define NFC_BUF_ADDR		0xE04
-#define NFC_FLASH_ADDR		0xE06
-#define NFC_FLASH_CMD		0xE08
-#define NFC_CONFIG		0xE0A
-#define NFC_ECC_STATUS_RESULT	0xE0C
-#define NFC_RSLTMAIN_AREA	0xE0E
-#define NFC_RSLTSPARE_AREA	0xE10
-#define NFC_WRPROT		0xE12
-#define NFC_V1_UNLOCKSTART_BLKADDR	0xe14
-#define NFC_V1_UNLOCKEND_BLKADDR	0xe16
-#define NFC_V21_UNLOCKSTART_BLKADDR	0xe20
-#define NFC_V21_UNLOCKEND_BLKADDR	0xe22
-#define NFC_NF_WRPRST		0xE18
-#define NFC_CONFIG1		0xE1A
-#define NFC_CONFIG2		0xE1C
-
-/* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Command operation */
-#define NFC_CMD            0x1
-
-/* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
- * for Address operation */
-#define NFC_ADDR           0x2
-
-/* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
- * for Input operation */
-#define NFC_INPUT          0x4
-
-/* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
- * for Data Output operation */
-#define NFC_OUTPUT         0x8
-
-/* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
- * for Read ID operation */
-#define NFC_ID             0x10
-
-/* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
- * for Read Status operation */
-#define NFC_STATUS         0x20
-
-/* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation */
-#define NFC_INT            0x8000
-
-#define NFC_SP_EN           (1 << 2)
-#define NFC_ECC_EN          (1 << 3)
-#define NFC_INT_MSK         (1 << 4)
-#define NFC_BIG             (1 << 5)
-#define NFC_RST             (1 << 6)
-#define NFC_CE              (1 << 7)
-#define NFC_ONE_CYCLE       (1 << 8)
+#define NFC_V1_V2_BUF_SIZE		(host->regs + 0x00)
+#define NFC_V1_V2_BUF_ADDR		(host->regs + 0x04)
+#define NFC_V1_V2_FLASH_ADDR		(host->regs + 0x06)
+#define NFC_V1_V2_FLASH_CMD		(host->regs + 0x08)
+#define NFC_V1_V2_CONFIG		(host->regs + 0x0a)
+#define NFC_V1_V2_ECC_STATUS_RESULT	(host->regs + 0x0c)
+#define NFC_V1_V2_RSLTMAIN_AREA		(host->regs + 0x0e)
+#define NFC_V1_V2_RSLTSPARE_AREA	(host->regs + 0x10)
+#define NFC_V1_V2_WRPROT		(host->regs + 0x12)
+#define NFC_V1_UNLOCKSTART_BLKADDR	(host->regs + 0x14)
+#define NFC_V1_UNLOCKEND_BLKADDR	(host->regs + 0x16)
+#define NFC_V21_UNLOCKSTART_BLKADDR	(host->regs + 0x20)
+#define NFC_V21_UNLOCKEND_BLKADDR	(host->regs + 0x22)
+#define NFC_V1_V2_NF_WRPRST		(host->regs + 0x18)
+#define NFC_V1_V2_CONFIG1		(host->regs + 0x1a)
+#define NFC_V1_V2_CONFIG2		(host->regs + 0x1c)
+
+#define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
+#define NFC_V1_V2_CONFIG1_SP_EN		(1 << 2)
+#define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
+#define NFC_V1_V2_CONFIG1_RST		(1 << 6)
+#define NFC_V1_V2_CONFIG1_CE		(1 << 7)
+#define NFC_V1_V2_CONFIG1_ONE_CYCLE	(1 << 8)
+
+#define NFC_V1_V2_CONFIG2_INT		(1 << 15)
+
+/*
+ * Operation modes for the NFC. Valid for v1, v2 and v3
+ * type controllers.
+ */
+#define NFC_CMD				(1 << 0)
+#define NFC_ADDR			(1 << 1)
+#define NFC_INPUT			(1 << 2)
+#define NFC_OUTPUT			(1 << 3)
+#define NFC_ID				(1 << 4)
+#define NFC_STATUS			(1 << 5)
+
+#define NFC_V3_FLASH_CMD		(host->regs_axi + 0x00)
+#define NFC_V3_FLASH_ADDR0		(host->regs_axi + 0x04)
+
+#define NFC_V3_CONFIG1			(host->regs_axi + 0x34)
+#define NFC_V3_CONFIG1_SP_EN		(1 << 0)
+#define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7 ) << 4)
+
+#define NFC_V3_ECC_STATUS_RESULT	(host->regs_axi + 0x38)
+
+#define NFC_V3_LAUNCH			(host->regs_axi + 0x40)
+
+#define NFC_V3_WRPROT			(host->regs_ip + 0x0)
+#define NFC_V3_WRPROT_LOCK_TIGHT	(1 << 0)
+#define NFC_V3_WRPROT_LOCK		(1 << 1)
+#define NFC_V3_WRPROT_UNLOCK		(1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
+
+#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0   (host->regs_ip + 0x04)
+
+#define NFC_V3_CONFIG2			(host->regs_ip + 0x24)
+#define NFC_V3_CONFIG2_PS_512			(0 << 0)
+#define NFC_V3_CONFIG2_PS_2048			(1 << 0)
+#define NFC_V3_CONFIG2_PS_4096			(2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE		(1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN			(1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES		(1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0		(1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8		(1 << 6)
+#define NFC_V3_CONFIG2_PPB(x)			(((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x)	(((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK			(1 << 15)
+#define NFC_V3_CONFIG2_ST_CMD(x)		(((x) & 0xff) << 24)
+#define NFC_V3_CONFIG2_SPAS(x)			(((x) & 0xff) << 16)
+
+#define NFC_V3_CONFIG3				(host->regs_ip + 0x28)
+#define NFC_V3_CONFIG3_ADD_OP(x)		(((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8			(1 << 3)
+#define NFC_V3_CONFIG3_SBB(x)			(((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x)	(((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE			(1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA			(1 << 20)
+
+#define NFC_V3_IPC			(host->regs_ip + 0x2C)
+#define NFC_V3_IPC_CREQ			(1 << 0)
+#define NFC_V3_IPC_INT			(1 << 31)
+
+#define NFC_V3_DELAY_LINE		(host->regs_ip + 0x34)
 
 struct mxc_nand_host {
 	struct mtd_info		mtd;
@@ -102,20 +138,30 @@ struct mxc_nand_host {
 
 	void			*spare0;
 	void			*main_area0;
-	void			*main_area1;
 
 	void __iomem		*base;
 	void __iomem		*regs;
+	void __iomem		*regs_axi;
+	void __iomem		*regs_ip;
 	int			status_request;
 	struct clk		*clk;
 	int			clk_act;
 	int			irq;
+	int			eccsize;
 
 	wait_queue_head_t	irq_waitq;
 
 	uint8_t			*data_buf;
 	unsigned int		buf_start;
 	int			spare_len;
+
+	void			(*preset)(struct mtd_info *);
+	void			(*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+	void			(*send_addr)(struct mxc_nand_host *, uint16_t, int);
+	void			(*send_page)(struct mtd_info *, unsigned int);
+	void			(*send_read_id)(struct mxc_nand_host *);
+	uint16_t		(*get_dev_status)(struct mxc_nand_host *);
+	int			(*check_int)(struct mxc_nand_host *);
 };
 
 /* OOB placement block for use with hardware ecc generation */
@@ -175,34 +221,52 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int check_int_v3(struct mxc_nand_host *host)
+{
+	uint32_t tmp;
+
+	tmp = readl(NFC_V3_IPC);
+	if (!(tmp & NFC_V3_IPC_INT))
+		return 0;
+
+	tmp &= ~NFC_V3_IPC_INT;
+	writel(tmp, NFC_V3_IPC);
+
+	return 1;
+}
+
+static int check_int_v1_v2(struct mxc_nand_host *host)
+{
+	uint32_t tmp;
+
+	tmp = readw(NFC_V1_V2_CONFIG2);
+	if (!(tmp & NFC_V1_V2_CONFIG2_INT))
+		return 0;
+
+	writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
+
+	return 1;
+}
+
 /* This function polls the NANDFC to wait for the basic operation to
  * complete by checking the INT bit of config2 register.
  */
 static void wait_op_done(struct mxc_nand_host *host, int useirq)
 {
-	uint16_t tmp;
 	int max_retries = 8000;
 
 	if (useirq) {
-		if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
+		if (!host->check_int(host)) {
 
 			enable_irq(host->irq);
 
-			wait_event(host->irq_waitq,
-				readw(host->regs + NFC_CONFIG2) & NFC_INT);
-
-			tmp = readw(host->regs + NFC_CONFIG2);
-			tmp  &= ~NFC_INT;
-			writew(tmp, host->regs + NFC_CONFIG2);
+			wait_event(host->irq_waitq, host->check_int(host));
 		}
 	} else {
 		while (max_retries-- > 0) {
-			if (readw(host->regs + NFC_CONFIG2) & NFC_INT) {
-				tmp = readw(host->regs + NFC_CONFIG2);
-				tmp  &= ~NFC_INT;
-				writew(tmp, host->regs + NFC_CONFIG2);
+			if (host->check_int(host))
 				break;
-			}
+
 			udelay(1);
 		}
 		if (max_retries < 0)
@@ -211,21 +275,33 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq)
 	}
 }
 
+static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+	/* fill command */
+	writel(cmd, NFC_V3_FLASH_CMD);
+
+	/* send out command */
+	writel(NFC_CMD, NFC_V3_LAUNCH);
+
+	/* Wait for operation to complete */
+	wait_op_done(host, useirq);
+}
+
 /* This function issues the specified command to the NAND device and
  * waits for completion. */
-static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 {
 	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
 
-	writew(cmd, host->regs + NFC_FLASH_CMD);
-	writew(NFC_CMD, host->regs + NFC_CONFIG2);
+	writew(cmd, NFC_V1_V2_FLASH_CMD);
+	writew(NFC_CMD, NFC_V1_V2_CONFIG2);
 
 	if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
 		int max_retries = 100;
 		/* Reset completion is indicated by NFC_CONFIG2 */
 		/* being set to 0 */
 		while (max_retries-- > 0) {
-			if (readw(host->regs + NFC_CONFIG2) == 0) {
+			if (readw(NFC_V1_V2_CONFIG2) == 0) {
 				break;
 			}
 			udelay(1);
@@ -239,21 +315,48 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
 	}
 }
 
+static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+	/* fill address */
+	writel(addr, NFC_V3_FLASH_ADDR0);
+
+	/* send out address */
+	writel(NFC_ADDR, NFC_V3_LAUNCH);
+
+	wait_op_done(host, 0);
+}
+
 /* This function sends an address (or partial address) to the
  * NAND device. The address is used to select the source/destination for
  * a NAND command. */
-static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
+static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
 {
 	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
 
-	writew(addr, host->regs + NFC_FLASH_ADDR);
-	writew(NFC_ADDR, host->regs + NFC_CONFIG2);
+	writew(addr, NFC_V1_V2_FLASH_ADDR);
+	writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, islast);
 }
 
-static void send_page(struct mtd_info *mtd, unsigned int ops)
+static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint32_t tmp;
+
+	tmp = readl(NFC_V3_CONFIG1);
+	tmp &= ~(7 << 4);
+	writel(tmp, NFC_V3_CONFIG1);
+
+	/* transfer data from NFC ram to nand */
+	writel(ops, NFC_V3_LAUNCH);
+
+	wait_op_done(host, false);
+}
+
+static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
@@ -267,24 +370,34 @@ static void send_page(struct mtd_info *mtd, unsigned int ops)
 	for (i = 0; i < bufs; i++) {
 
 		/* NANDFC buffer 0 is used for page read/write */
-		writew(i, host->regs + NFC_BUF_ADDR);
+		writew(i, NFC_V1_V2_BUF_ADDR);
 
-		writew(ops, host->regs + NFC_CONFIG2);
+		writew(ops, NFC_V1_V2_CONFIG2);
 
 		/* Wait for operation to complete */
 		wait_op_done(host, true);
 	}
 }
 
+static void send_read_id_v3(struct mxc_nand_host *host)
+{
+	/* Read ID into main buffer */
+	writel(NFC_ID, NFC_V3_LAUNCH);
+
+	wait_op_done(host, true);
+
+	memcpy(host->data_buf, host->main_area0, 16);
+}
+
 /* Request the NANDFC to perform a read of the NAND device ID. */
-static void send_read_id(struct mxc_nand_host *host)
+static void send_read_id_v1_v2(struct mxc_nand_host *host)
 {
 	struct nand_chip *this = &host->nand;
 
 	/* NANDFC buffer 0 is used for device ID output */
-	writew(0x0, host->regs + NFC_BUF_ADDR);
+	writew(0x0, NFC_V1_V2_BUF_ADDR);
 
-	writew(NFC_ID, host->regs + NFC_CONFIG2);
+	writew(NFC_ID, NFC_V1_V2_CONFIG2);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, true);
@@ -301,29 +414,36 @@ static void send_read_id(struct mxc_nand_host *host)
 	memcpy(host->data_buf, host->main_area0, 16);
 }
 
+static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
+{
+	writew(NFC_STATUS, NFC_V3_LAUNCH);
+	wait_op_done(host, true);
+
+	return readl(NFC_V3_CONFIG1) >> 16;
+}
+
 /* This function requests the NANDFC to perform a read of the
  * NAND device status and returns the current status. */
-static uint16_t get_dev_status(struct mxc_nand_host *host)
+static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
 {
-	void __iomem *main_buf = host->main_area1;
+	void __iomem *main_buf = host->main_area0;
 	uint32_t store;
 	uint16_t ret;
-	/* Issue status request to NAND device */
 
-	/* store the main area1 first word, later do recovery */
-	store = readl(main_buf);
-	/* NANDFC buffer 1 is used for device status to prevent
-	 * corruption of read/write buffer on status requests. */
-	writew(1, host->regs + NFC_BUF_ADDR);
+	writew(0x0, NFC_V1_V2_BUF_ADDR);
 
-	writew(NFC_STATUS, host->regs + NFC_CONFIG2);
+	/*
+	 * The device status is stored in main_area0. To
+	 * prevent corruption of the buffer save the value
+	 * and restore it afterwards.
+	 */
+	store = readl(main_buf);
 
-	/* Wait for operation to complete */
+	writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
 	wait_op_done(host, true);
 
-	/* Status is placed in first word of main buffer */
-	/* get status, then recovery area 1 data */
 	ret = readw(main_buf);
+
 	writel(store, main_buf);
 
 	return ret;
@@ -347,7 +467,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	 */
 }
 
-static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
 				 u_char *read_ecc, u_char *calc_ecc)
 {
 	struct nand_chip *nand_chip = mtd->priv;
@@ -358,7 +478,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	 * additional correction.  2-Bit errors cannot be corrected by
 	 * HW ECC, so we need to return failure
 	 */
-	uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT);
+	uint16_t ecc_status = readw(NFC_V1_V2_ECC_STATUS_RESULT);
 
 	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
 		DEBUG(MTD_DEBUG_LEVEL0,
@@ -369,6 +489,43 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	return 0;
 }
 
+static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
+				 u_char *read_ecc, u_char *calc_ecc)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	u32 ecc_stat, err;
+	int no_subpages = 1;
+	int ret = 0;
+	u8 ecc_bit_mask, err_limit;
+
+	ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
+	err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
+
+	no_subpages = mtd->writesize >> 9;
+
+	if (nfc_is_v21())
+		ecc_stat = readl(NFC_V1_V2_ECC_STATUS_RESULT);
+	else
+		ecc_stat = readl(NFC_V3_ECC_STATUS_RESULT);
+
+	do {
+		err = ecc_stat & ecc_bit_mask;
+		if (err > err_limit) {
+			printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+			return -1;
+		} else {
+			ret += err;
+		}
+		ecc_stat >>= 4;
+	} while (--no_subpages);
+
+	mtd->ecc_stats.corrected += ret;
+	pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+
+	return ret;
+}
+
 static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 				  u_char *ecc_code)
 {
@@ -383,7 +540,7 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 
 	/* Check for status request */
 	if (host->status_request)
-		return get_dev_status(host) & 0xFF;
+		return host->get_dev_status(host) & 0xFF;
 
 	ret = *(uint8_t *)(host->data_buf + host->buf_start);
 	host->buf_start++;
@@ -519,71 +676,163 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
 		 * we will used the saved column address to index into
 		 * the full page.
 		 */
-		send_addr(host, 0, page_addr == -1);
+		host->send_addr(host, 0, page_addr == -1);
 		if (mtd->writesize > 512)
 			/* another col addr cycle for 2k page */
-			send_addr(host, 0, false);
+			host->send_addr(host, 0, false);
 	}
 
 	/* Write out page address, if necessary */
 	if (page_addr != -1) {
 		/* paddr_0 - p_addr_7 */
-		send_addr(host, (page_addr & 0xff), false);
+		host->send_addr(host, (page_addr & 0xff), false);
 
 		if (mtd->writesize > 512) {
 			if (mtd->size >= 0x10000000) {
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, false);
-				send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, false);
+				host->send_addr(host, (page_addr >> 16) & 0xff, true);
 			} else
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, true);
 		} else {
 			/* One more address cycle for higher density devices */
 			if (mtd->size >= 0x4000000) {
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, false);
-				send_addr(host, (page_addr >> 16) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, false);
+				host->send_addr(host, (page_addr >> 16) & 0xff, true);
 			} else
 				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff, true);
+				host->send_addr(host, (page_addr >> 8) & 0xff, true);
 		}
 	}
 }
 
-static void preset(struct mtd_info *mtd)
+/*
+ * v2 and v3 type controllers can do 4bit or 8bit ecc depending
+ * on how much oob the nand chip has. For 8bit ecc we need at least
+ * 26 bytes of oob data per 512 byte block.
+ */
+static int get_eccsize(struct mtd_info *mtd)
+{
+	int oobbytes_per_512 = 0;
+
+	oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
+
+	if (oobbytes_per_512 < 26)
+		return 4;
+	else
+		return 8;
+}
+
+static void preset_v1_v2(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
 	uint16_t tmp;
 
 	/* enable interrupt, disable spare enable */
-	tmp = readw(host->regs + NFC_CONFIG1);
-	tmp &= ~NFC_INT_MSK;
-	tmp &= ~NFC_SP_EN;
+	tmp = readw(NFC_V1_V2_CONFIG1);
+	tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+	tmp &= ~NFC_V1_V2_CONFIG1_SP_EN;
 	if (nand_chip->ecc.mode == NAND_ECC_HW) {
-		tmp |= NFC_ECC_EN;
+		tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
+	} else {
+		tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
+	}
+
+	if (nfc_is_v21() && mtd->writesize) {
+		host->eccsize = get_eccsize(mtd);
+		if (host->eccsize == 4)
+			tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
 	} else {
-		tmp &= ~NFC_ECC_EN;
+		host->eccsize = 1;
 	}
-	writew(tmp, host->regs + NFC_CONFIG1);
+
+	writew(tmp, NFC_V1_V2_CONFIG1);
 	/* preset operation */
 
 	/* Unlock the internal RAM Buffer */
-	writew(0x2, host->regs + NFC_CONFIG);
+	writew(0x2, NFC_V1_V2_CONFIG);
 
 	/* Blocks to be unlocked */
 	if (nfc_is_v21()) {
-		writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
-		writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+		writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR);
+		writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR);
 	} else if (nfc_is_v1()) {
-		writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
-		writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+		writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+		writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR);
 	} else
 		BUG();
 
 	/* Unlock Block Command for given address range */
-	writew(0x4, host->regs + NFC_WRPROT);
+	writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v3(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct mxc_nand_host *host = chip->priv;
+	uint32_t config2, config3;
+	int i, addr_phases;
+
+	writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
+	writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
+
+	/* Unlock the internal RAM Buffer */
+	writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+			NFC_V3_WRPROT);
+
+	/* Blocks to be unlocked */
+	for (i = 0; i < NAND_MAX_CHIPS; i++)
+		writel(0x0 |	(0xffff << 16),
+				NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
+
+	writel(0, NFC_V3_IPC);
+
+	config2 = NFC_V3_CONFIG2_ONE_CYCLE |
+		NFC_V3_CONFIG2_2CMD_PHASES |
+		NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
+		NFC_V3_CONFIG2_ST_CMD(0x70) |
+		NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
+
+	if (chip->ecc.mode == NAND_ECC_HW)
+		config2 |= NFC_V3_CONFIG2_ECC_EN;
+
+	addr_phases = fls(chip->pagemask) >> 3;
+
+	if (mtd->writesize == 2048) {
+		config2 |= NFC_V3_CONFIG2_PS_2048;
+		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+	} else if (mtd->writesize == 4096) {
+		config2 |= NFC_V3_CONFIG2_PS_4096;
+		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+	} else {
+		config2 |= NFC_V3_CONFIG2_PS_512;
+		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
+	}
+
+	if (mtd->writesize) {
+		config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6);
+		host->eccsize = get_eccsize(mtd);
+		if (host->eccsize == 8)
+			config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
+	}
+
+	writel(config2, NFC_V3_CONFIG2);
+
+	config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
+			NFC_V3_CONFIG3_NO_SDMA |
+			NFC_V3_CONFIG3_RBB_MODE |
+			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+			NFC_V3_CONFIG3_ADD_OP(0);
+
+	if (!(chip->options & NAND_BUSWIDTH_16))
+		config3 |= NFC_V3_CONFIG3_FW8;
+
+	writel(config3, NFC_V3_CONFIG3);
+
+	writel(0, NFC_V3_DELAY_LINE);
 }
 
 /* Used by the upper layer to write command to NAND Flash for
@@ -604,15 +853,15 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	/* Command pre-processing step */
 	switch (command) {
 	case NAND_CMD_RESET:
-		send_cmd(host, command, false);
-		preset(mtd);
+		host->preset(mtd);
+		host->send_cmd(host, command, false);
 		break;
 
 	case NAND_CMD_STATUS:
 		host->buf_start = 0;
 		host->status_request = true;
 
-		send_cmd(host, command, true);
+		host->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
@@ -625,13 +874,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 		command = NAND_CMD_READ0; /* only READ0 is valid */
 
-		send_cmd(host, command, false);
+		host->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		if (mtd->writesize > 512)
-			send_cmd(host, NAND_CMD_READSTART, true);
+			host->send_cmd(host, NAND_CMD_READSTART, true);
 
-		send_page(mtd, NFC_OUTPUT);
+		host->send_page(mtd, NFC_OUTPUT);
 
 		memcpy(host->data_buf, host->main_area0, mtd->writesize);
 		copy_spare(mtd, true);
@@ -644,28 +893,28 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 		host->buf_start = column;
 
-		send_cmd(host, command, false);
+		host->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_PAGEPROG:
 		memcpy(host->main_area0, host->data_buf, mtd->writesize);
 		copy_spare(mtd, false);
-		send_page(mtd, NFC_INPUT);
-		send_cmd(host, command, true);
+		host->send_page(mtd, NFC_INPUT);
+		host->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 		break;
 
 	case NAND_CMD_READID:
-		send_cmd(host, command, true);
+		host->send_cmd(host, command, true);
 		mxc_do_addr_cycle(mtd, column, page_addr);
-		send_read_id(host);
+		host->send_read_id(host);
 		host->buf_start = column;
 		break;
 
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
-		send_cmd(host, command, false);
+		host->send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
 		break;
@@ -761,22 +1010,55 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	}
 
 	host->main_area0 = host->base;
-	host->main_area1 = host->base + 0x200;
+
+	if (nfc_is_v1() || nfc_is_v21()) {
+		host->preset = preset_v1_v2;
+		host->send_cmd = send_cmd_v1_v2;
+		host->send_addr = send_addr_v1_v2;
+		host->send_page = send_page_v1_v2;
+		host->send_read_id = send_read_id_v1_v2;
+		host->get_dev_status = get_dev_status_v1_v2;
+		host->check_int = check_int_v1_v2;
+	}
 
 	if (nfc_is_v21()) {
-		host->regs = host->base + 0x1000;
+		host->regs = host->base + 0x1e00;
 		host->spare0 = host->base + 0x1000;
 		host->spare_len = 64;
 		oob_smallpage = &nandv2_hw_eccoob_smallpage;
 		oob_largepage = &nandv2_hw_eccoob_largepage;
 		this->ecc.bytes = 9;
 	} else if (nfc_is_v1()) {
-		host->regs = host->base;
+		host->regs = host->base + 0xe00;
 		host->spare0 = host->base + 0x800;
 		host->spare_len = 16;
 		oob_smallpage = &nandv1_hw_eccoob_smallpage;
 		oob_largepage = &nandv1_hw_eccoob_largepage;
 		this->ecc.bytes = 3;
+		host->eccsize = 1;
+	} else if (nfc_is_v3_2()) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (!res) {
+			err = -ENODEV;
+			goto eirq;
+		}
+		host->regs_ip = ioremap(res->start, resource_size(res));
+		if (!host->regs_ip) {
+			err = -ENOMEM;
+			goto eirq;
+		}
+		host->regs_axi = host->base + 0x1e00;
+		host->spare0 = host->base + 0x1000;
+		host->spare_len = 64;
+		host->preset = preset_v3;
+		host->send_cmd = send_cmd_v3;
+		host->send_addr = send_addr_v3;
+		host->send_page = send_page_v3;
+		host->send_read_id = send_read_id_v3;
+		host->check_int = check_int_v3;
+		host->get_dev_status = get_dev_status_v3;
+		oob_smallpage = &nandv2_hw_eccoob_smallpage;
+		oob_largepage = &nandv2_hw_eccoob_largepage;
 	} else
 		BUG();
 
@@ -786,7 +1068,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	if (pdata->hw_ecc) {
 		this->ecc.calculate = mxc_nand_calculate_ecc;
 		this->ecc.hwctl = mxc_nand_enable_hwecc;
-		this->ecc.correct = mxc_nand_correct_data;
+		if (nfc_is_v1())
+			this->ecc.correct = mxc_nand_correct_data_v1;
+		else
+			this->ecc.correct = mxc_nand_correct_data_v2_v3;
 		this->ecc.mode = NAND_ECC_HW;
 	} else {
 		this->ecc.mode = NAND_ECC_SOFT;
@@ -817,6 +1102,9 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		goto escan;
 	}
 
+	/* Call preset again, with correct writesize this time */
+	host->preset(mtd);
+
 	if (mtd->writesize == 2048)
 		this->ecc.layout = oob_largepage;
 
@@ -848,6 +1136,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 escan:
 	free_irq(host->irq, host);
 eirq:
+	if (host->regs_ip)
+		iounmap(host->regs_ip);
 	iounmap(host->base);
 eres:
 	clk_put(host->clk);
@@ -867,59 +1157,19 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 
 	nand_release(&host->mtd);
 	free_irq(host->irq, host);
+	if (host->regs_ip)
+		iounmap(host->regs_ip);
 	iounmap(host->base);
 	kfree(host);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct mtd_info *mtd = platform_get_drvdata(pdev);
-	struct nand_chip *nand_chip = mtd->priv;
-	struct mxc_nand_host *host = nand_chip->priv;
-	int ret = 0;
-
-	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
-
-	ret = mtd->suspend(mtd);
-
-	/*
-	 * nand_suspend locks the device for exclusive access, so
-	 * the clock must already be off.
-	 */
-	BUG_ON(!ret && host->clk_act);
-
-	return ret;
-}
-
-static int mxcnd_resume(struct platform_device *pdev)
-{
-	struct mtd_info *mtd = platform_get_drvdata(pdev);
-	struct nand_chip *nand_chip = mtd->priv;
-	struct mxc_nand_host *host = nand_chip->priv;
-	int ret = 0;
-
-	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
-
-	mtd->resume(mtd);
-
-	return ret;
-}
-
-#else
-# define mxcnd_suspend   NULL
-# define mxcnd_resume    NULL
-#endif				/* CONFIG_PM */
-
 static struct platform_driver mxcnd_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
-		   },
+	},
 	.remove = __devexit_p(mxcnd_remove),
-	.suspend = mxcnd_suspend,
-	.resume = mxcnd_resume,
 };
 
 static int __init mxc_nd_init(void)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 4a7b86423ee9..16a1714df008 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -42,7 +42,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/leds.h>
@@ -347,7 +346,7 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 	struct nand_chip *chip = mtd->priv;
 	u16 bad;
 
-	if (chip->options & NAND_BB_LAST_PAGE)
+	if (chip->options & NAND_BBT_SCANLASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -397,9 +396,9 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct nand_chip *chip = mtd->priv;
 	uint8_t buf[2] = { 0, 0 };
-	int block, ret;
+	int block, ret, i = 0;
 
-	if (chip->options & NAND_BB_LAST_PAGE)
+	if (chip->options & NAND_BBT_SCANLASTPAGE)
 		ofs += mtd->erasesize - mtd->writesize;
 
 	/* Get block number */
@@ -411,17 +410,31 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	if (chip->options & NAND_USE_FLASH_BBT)
 		ret = nand_update_bbt(mtd, ofs);
 	else {
-		/* We write two bytes, so we dont have to mess with 16 bit
-		 * access
-		 */
 		nand_get_device(chip, mtd, FL_WRITING);
-		ofs += mtd->oobsize;
-		chip->ops.len = chip->ops.ooblen = 2;
-		chip->ops.datbuf = NULL;
-		chip->ops.oobbuf = buf;
-		chip->ops.ooboffs = chip->badblockpos & ~0x01;
 
-		ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+		/* Write to first two pages and to byte 1 and 6 if necessary.
+		 * If we write to more than one location, the first error
+		 * encountered quits the procedure. We write two bytes per
+		 * location, so we dont have to mess with 16 bit access.
+		 */
+		do {
+			chip->ops.len = chip->ops.ooblen = 2;
+			chip->ops.datbuf = NULL;
+			chip->ops.oobbuf = buf;
+			chip->ops.ooboffs = chip->badblockpos & ~0x01;
+
+			ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+
+			if (!ret && (chip->options & NAND_BBT_SCANBYTE1AND6)) {
+				chip->ops.ooboffs = NAND_SMALL_BADBLOCK_POS
+					& ~0x01;
+				ret = nand_do_write_oob(mtd, ofs, &chip->ops);
+			}
+			i++;
+			ofs += mtd->writesize;
+		} while (!ret && (chip->options & NAND_BBT_SCAN2NDPAGE) &&
+				i < 2);
+
 		nand_release_device(mtd);
 	}
 	if (!ret)
@@ -2920,9 +2933,14 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 		chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 32 - 1;
 
 	/* Set the bad block position */
-	chip->badblockpos = mtd->writesize > 512 ?
-		NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-	chip->badblockbits = 8;
+	if (!(busw & NAND_BUSWIDTH_16) && (*maf_id == NAND_MFR_STMICRO ||
+				(*maf_id == NAND_MFR_SAMSUNG &&
+				 mtd->writesize == 512) ||
+				*maf_id == NAND_MFR_AMD))
+		chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+	else
+		chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+
 
 	/* Get chip options, preserve non chip based options */
 	chip->options &= ~NAND_CHIPOPTIONS_MSK;
@@ -2941,12 +2959,32 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 
 	/*
 	 * Bad block marker is stored in the last page of each block
-	 * on Samsung and Hynix MLC devices
+	 * on Samsung and Hynix MLC devices; stored in first two pages
+	 * of each block on Micron devices with 2KiB pages and on
+	 * SLC Samsung, Hynix, and AMD/Spansion. All others scan only
+	 * the first page.
 	 */
 	if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
 			(*maf_id == NAND_MFR_SAMSUNG ||
 			 *maf_id == NAND_MFR_HYNIX))
-		chip->options |= NAND_BB_LAST_PAGE;
+		chip->options |= NAND_BBT_SCANLASTPAGE;
+	else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+				(*maf_id == NAND_MFR_SAMSUNG ||
+				 *maf_id == NAND_MFR_HYNIX ||
+				 *maf_id == NAND_MFR_AMD)) ||
+			(mtd->writesize == 2048 &&
+			 *maf_id == NAND_MFR_MICRON))
+		chip->options |= NAND_BBT_SCAN2NDPAGE;
+
+	/*
+	 * Numonyx/ST 2K pages, x8 bus use BOTH byte 1 and 6
+	 */
+	if (!(busw & NAND_BUSWIDTH_16) &&
+			*maf_id == NAND_MFR_STMICRO &&
+			mtd->writesize == 2048) {
+		chip->options |= NAND_BBT_SCANBYTE1AND6;
+		chip->badblockpos = 0;
+	}
 
 	/* Check for AND chips with 4 page planes */
 	if (chip->options & NAND_4PAGE_ARRAY)
@@ -3306,6 +3344,11 @@ void nand_release(struct mtd_info *mtd)
 	kfree(chip->bbt);
 	if (!(chip->options & NAND_OWN_BUFFERS))
 		kfree(chip->buffers);
+
+	/* Free bad block descriptor memory */
+	if (chip->badblock_pattern && chip->badblock_pattern->options
+			& NAND_BBT_DYNAMICSTRUCT)
+		kfree(chip->badblock_pattern);
 }
 
 EXPORT_SYMBOL_GPL(nand_lock);
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ad97c0ce73b2..5fedf4a74f16 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -55,7 +55,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
@@ -93,6 +92,28 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
 			return -1;
 	}
 
+	/* Check both positions 1 and 6 for pattern? */
+	if (td->options & NAND_BBT_SCANBYTE1AND6) {
+		if (td->options & NAND_BBT_SCANEMPTY) {
+			p += td->len;
+			end += NAND_SMALL_BADBLOCK_POS - td->offs;
+			/* Check region between positions 1 and 6 */
+			for (i = 0; i < NAND_SMALL_BADBLOCK_POS - td->offs - td->len;
+					i++) {
+				if (*p++ != 0xff)
+					return -1;
+			}
+		}
+		else {
+			p += NAND_SMALL_BADBLOCK_POS - td->offs;
+		}
+		/* Compare the pattern */
+		for (i = 0; i < td->len; i++) {
+			if (p[i] != td->pattern[i])
+				return -1;
+		}
+	}
+
 	if (td->options & NAND_BBT_SCANEMPTY) {
 		p += td->len;
 		end += td->len;
@@ -124,6 +145,13 @@ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
 		if (p[td->offs + i] != td->pattern[i])
 			return -1;
 	}
+	/* Need to check location 1 AND 6? */
+	if (td->options & NAND_BBT_SCANBYTE1AND6) {
+		for (i = 0; i < td->len; i++) {
+			if (p[NAND_SMALL_BADBLOCK_POS + i] != td->pattern[i])
+				return -1;
+		}
+	}
 	return 0;
 }
 
@@ -397,12 +425,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 
 	if (bd->options & NAND_BBT_SCANALLPAGES)
 		len = 1 << (this->bbt_erase_shift - this->page_shift);
-	else {
-		if (bd->options & NAND_BBT_SCAN2NDPAGE)
-			len = 2;
-		else
-			len = 1;
-	}
+	else if (bd->options & NAND_BBT_SCAN2NDPAGE)
+		len = 2;
+	else
+		len = 1;
 
 	if (!(bd->options & NAND_BBT_SCANEMPTY)) {
 		/* We need only read few bytes from the OOB area */
@@ -432,7 +458,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
 		from = (loff_t)startblock << (this->bbt_erase_shift - 1);
 	}
 
-	if (this->options & NAND_BB_LAST_PAGE)
+	if (this->options & NAND_BBT_SCANLASTPAGE)
 		from += mtd->erasesize - (mtd->writesize * len);
 
 	for (i = startblock; i < numblocks;) {
@@ -1092,30 +1118,16 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
  * while scanning a device for factory marked good / bad blocks. */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
-static struct nand_bbt_descr smallpage_memorybased = {
-	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 5,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_bbt_descr largepage_memorybased = {
-	.options = 0,
-	.offs = 0,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
 static struct nand_bbt_descr smallpage_flashbased = {
 	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 5,
+	.offs = NAND_SMALL_BADBLOCK_POS,
 	.len = 1,
 	.pattern = scan_ff_pattern
 };
 
 static struct nand_bbt_descr largepage_flashbased = {
 	.options = NAND_BBT_SCAN2NDPAGE,
-	.offs = 0,
+	.offs = NAND_LARGE_BADBLOCK_POS,
 	.len = 2,
 	.pattern = scan_ff_pattern
 };
@@ -1154,6 +1166,43 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 	.pattern = mirror_pattern
 };
 
+#define BBT_SCAN_OPTIONS (NAND_BBT_SCANLASTPAGE | NAND_BBT_SCAN2NDPAGE | \
+		NAND_BBT_SCANBYTE1AND6)
+/**
+ * nand_create_default_bbt_descr - [Internal] Creates a BBT descriptor structure
+ * @this:	NAND chip to create descriptor for
+ *
+ * This function allocates and initializes a nand_bbt_descr for BBM detection
+ * based on the properties of "this". The new descriptor is stored in
+ * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
+ * passed to this function.
+ *
+ * TODO: Handle other flags, replace other static structs
+ *        (e.g. handle NAND_BBT_FLASH for flash-based BBT,
+ *             replace smallpage_flashbased)
+ *
+ */
+static int nand_create_default_bbt_descr(struct nand_chip *this)
+{
+	struct nand_bbt_descr *bd;
+	if (this->badblock_pattern) {
+		printk(KERN_WARNING "BBT descr already allocated; not replacing.\n");
+		return -EINVAL;
+	}
+	bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+	if (!bd) {
+		printk(KERN_ERR "nand_create_default_bbt_descr: Out of memory\n");
+		return -ENOMEM;
+	}
+	bd->options = this->options & BBT_SCAN_OPTIONS;
+	bd->offs = this->badblockpos;
+	bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
+	bd->pattern = scan_ff_pattern;
+	bd->options |= NAND_BBT_DYNAMICSTRUCT;
+	this->badblock_pattern = bd;
+	return 0;
+}
+
 /**
  * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
  * @mtd:	MTD device structure
@@ -1196,10 +1245,8 @@ int nand_default_bbt(struct mtd_info *mtd)
 	} else {
 		this->bbt_td = NULL;
 		this->bbt_md = NULL;
-		if (!this->badblock_pattern) {
-			this->badblock_pattern = (mtd->writesize > 512) ?
-			    &largepage_memorybased : &smallpage_memorybased;
-		}
+		if (!this->badblock_pattern)
+			nand_create_default_bbt_descr(this);
 	}
 	return nand_scan_bbt(mtd, this->badblock_pattern);
 }
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 89907ed99009..a04b89105b65 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -85,6 +85,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 128MiB 3,3V 8-bit",	0xD1, 0, 128, 0, LP_OPTIONS},
 	{"NAND 128MiB 1,8V 16-bit",	0xB1, 0, 128, 0, LP_OPTIONS16},
 	{"NAND 128MiB 3,3V 16-bit",	0xC1, 0, 128, 0, LP_OPTIONS16},
+	{"NAND 128MiB 1,8V 16-bit",     0xAD, 0, 128, 0, LP_OPTIONS16},
 
 	/* 2 Gigabit */
 	{"NAND 256MiB 1,8V 8-bit",	0xAA, 0, 256, 0, LP_OPTIONS},
@@ -110,6 +111,9 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 2GiB 1,8V 16-bit",	0xB5, 0, 2048, 0, LP_OPTIONS16},
 	{"NAND 2GiB 3,3V 16-bit",	0xC5, 0, 2048, 0, LP_OPTIONS16},
 
+	/* 32 Gigabit */
+	{"NAND 4GiB 3,3V 8-bit",	0xD7, 0, 4096, 0, LP_OPTIONS16},
+
 	/*
 	 * Renesas AND 1 Gigabit. Those chips do not support extended id and
 	 * have a strange page/block layout !  The chosen minimum erasesize is
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 261337efe0ee..c25648bb5793 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -553,8 +553,8 @@ static uint64_t divide(uint64_t n, uint32_t d)
  */
 static int init_nandsim(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
+	struct nand_chip *chip = mtd->priv;
+	struct nandsim   *ns   = chip->priv;
 	int i, ret = 0;
 	uint64_t remains;
 	uint64_t next_offset;
@@ -1877,7 +1877,7 @@ static void switch_state(struct nandsim *ns)
 
 static u_char ns_nand_read_byte(struct mtd_info *mtd)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 	u_char outb = 0x00;
 
 	/* Sanity and correctness checks */
@@ -1950,7 +1950,7 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd)
 
 static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 
 	/* Sanity and correctness checks */
 	if (!ns->lines.ce) {
@@ -2132,7 +2132,7 @@ static uint16_t ns_nand_read_word(struct mtd_info *mtd)
 
 static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 
 	/* Check that chip is expecting data input */
 	if (!(ns->state & STATE_DATAIN_MASK)) {
@@ -2159,7 +2159,7 @@ static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 
 static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
-        struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv;
+	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
 
 	/* Sanity and correctness checks */
 	if (!ns->lines.ce) {
@@ -2352,7 +2352,7 @@ module_init(ns_init_module);
  */
 static void __exit ns_cleanup_module(void)
 {
-	struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv);
+	struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
 	int i;
 
 	free_nandsim(ns);    /* Free nandsim private resources */
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 8d467315f02b..90e143e5ad3e 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -91,7 +91,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
 	}
 
 	/* Scan to find existance of the device */
-	if (nand_scan(&data->mtd, 1)) {
+	if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
 		err = -ENXIO;
 		goto out;
 	}
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index bcfc851fe550..5169ca6a66bc 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -64,8 +64,8 @@ static inline void r852_write_reg_dword(struct r852_device *dev,
 /* returns pointer to our private structure */
 static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-	return (struct r852_device *)chip->priv;
+	struct nand_chip *chip = mtd->priv;
+	return chip->priv;
 }
 
 
@@ -380,7 +380,7 @@ void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
  */
 int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
 {
-	struct r852_device *dev = (struct r852_device *)chip->priv;
+	struct r852_device *dev = chip->priv;
 
 	unsigned long timeout;
 	int status;
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index a033c4cd8e16..67440b5beef8 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -24,7 +24,6 @@
 #include <linux/rslib.h>
 #include <linux/bitrev.h>
 #include <linux/module.h>
-#include <linux/mtd/compatmac.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 239aadfd01b0..33d832dddfdd 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -727,15 +727,12 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 	if (set == NULL)
 		return add_mtd_device(&mtd->mtd);
 
-	if (set->nr_partitions == 0) {
-		mtd->mtd.name = set->name;
-		nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
-						&part_info, 0);
-	} else {
-		if (set->nr_partitions > 0 && set->partitions != NULL) {
-			nr_part = set->nr_partitions;
-			part_info = set->partitions;
-		}
+	mtd->mtd.name = set->name;
+	nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0);
+
+	if (nr_part <= 0 && set->nr_partitions > 0) {
+		nr_part = set->nr_partitions;
+		part_info = set->partitions;
 	}
 
 	if (nr_part > 0 && part_info)
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index ac80fb362e63..4a8f367c295c 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -109,7 +109,7 @@ static struct nand_flash_dev nand_xd_flash_ids[] = {
 
 int sm_register_device(struct mtd_info *mtd, int smartmedia)
 {
-	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+	struct nand_chip *chip = mtd->priv;
 	int ret;
 
 	chip->options |= NAND_SKIP_BBTSCAN;
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index a4578bf903aa..b155666acfbe 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -1,11 +1,22 @@
-/* Linux driver for NAND Flash Translation Layer      */
-/* (c) 1999 Machine Vision Holdings, Inc.             */
-/* Author: David Woodhouse <dwmw2@infradead.org>      */
-
 /*
-  The contents of this file are distributed under the GNU General
-  Public License version 2. The author places no additional
-  restrictions of any kind on it.
+ * Linux driver for NAND Flash Translation Layer
+ *
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #define PRERELEASE
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 8b22b1836e9f..e3cd1ffad2f6 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -2,7 +2,8 @@
  * NFTL mount code with extensive checks
  *
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
- * Copyright (C) 2000 Netgem S.A.
+ * Copyright © 2000 Netgem S.A.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 4f0d635674f3..8bf7dc6d1ce6 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -1,11 +1,11 @@
 /*
  * Flash partitions described by the OF (or flattened) device tree
  *
- * Copyright (C) 2006 MontaVista Software Inc.
+ * Copyright © 2006 MontaVista Software Inc.
  * Author: Vitaly Wool <vwool@ru.mvista.com>
  *
  * Revised to handle newer style flash binding by:
- *   Copyright (C) 2007 David Gibson, IBM Corporation.
+ *   Copyright © 2007 David Gibson, IBM Corporation.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 9a49d68ba5f9..3f32289fdbb5 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -25,14 +25,14 @@ config MTD_ONENAND_GENERIC
 
 config MTD_ONENAND_OMAP2
 	tristate "OneNAND on OMAP2/OMAP3 support"
-	depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 	help
 	  Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
 	  via the GPMC memory controller.
 
 config MTD_ONENAND_SAMSUNG
         tristate "OneNAND on Samsung SOC controller support"
-        depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210)
+        depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
         help
           Support for a OneNAND flash device connected to an Samsung SOC
           S3C64XX/S5PC1XX controller.
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 26caf2590dae..a2bb520286f8 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -377,8 +377,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le
 
 	default:
 		block = onenand_block(this, addr);
-		page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
-
+		if (FLEXONENAND(this))
+			page = (int) (addr - onenand_addr(this, block))>>\
+				this->page_shift;
+		else
+			page = (int) (addr >> this->page_shift);
 		if (ONENAND_IS_2PLANE(this)) {
 			/* Make the even block number */
 			block &= ~1;
@@ -3730,17 +3733,16 @@ out:
 }
 
 /**
- * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * onenand_chip_probe - [OneNAND Interface] The generic chip probe
  * @param mtd		MTD device structure
  *
  * OneNAND detection method:
  *   Compare the values from command with ones from register
  */
-static int onenand_probe(struct mtd_info *mtd)
+static int onenand_chip_probe(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
-	int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
-	int density;
+	int bram_maf_id, bram_dev_id, maf_id, dev_id;
 	int syscfg;
 
 	/* Save system configuration 1 */
@@ -3763,12 +3765,6 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* Restore system configuration 1 */
 	this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
 
-	/* Workaround */
-	if (syscfg & ONENAND_SYS_CFG1_SYNC_WRITE) {
-		bram_maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
-		bram_dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
-	}
-
 	/* Check manufacturer ID */
 	if (onenand_check_maf(bram_maf_id))
 		return -ENXIO;
@@ -3776,13 +3772,35 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* Read manufacturer and device IDs from Register */
 	maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
 	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
-	ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
-	this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
 
 	/* Check OneNAND device */
 	if (maf_id != bram_maf_id || dev_id != bram_dev_id)
 		return -ENXIO;
 
+	return 0;
+}
+
+/**
+ * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * @param mtd		MTD device structure
+ */
+static int onenand_probe(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int maf_id, dev_id, ver_id;
+	int density;
+	int ret;
+
+	ret = this->chip_probe(mtd);
+	if (ret)
+		return ret;
+
+	/* Read manufacturer and device IDs from Register */
+	maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
+	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+	ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+	this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
+
 	/* Flash device information */
 	onenand_print_device_info(dev_id, ver_id);
 	this->device_id = dev_id;
@@ -3909,6 +3927,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	if (!this->unlock_all)
 		this->unlock_all = onenand_unlock_all;
 
+	if (!this->chip_probe)
+		this->chip_probe = onenand_chip_probe;
+
 	if (!this->read_bufferram)
 		this->read_bufferram = onenand_read_bufferram;
 	if (!this->write_bufferram)
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index a91fcac1af01..01ab5b3c453b 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
-#include <linux/mtd/compatmac.h>
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 2750317cb58f..cb443af3d45f 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -630,6 +630,12 @@ normal:
 	return 0;
 }
 
+static int s5pc110_chip_probe(struct mtd_info *mtd)
+{
+	/* Now just return 0 */
+	return 0;
+}
+
 static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
 {
 	unsigned int flags = INT_ACT | LOAD_CMP;
@@ -757,6 +763,7 @@ static void s3c_onenand_setup(struct mtd_info *mtd)
 		/* Use generic onenand functions */
 		onenand->cmd_map = s5pc1xx_cmd_map;
 		this->read_bufferram = s5pc110_read_bufferram;
+		this->chip_probe = s5pc110_chip_probe;
 		return;
 	} else {
 		BUG();
@@ -781,7 +788,6 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 	struct mtd_info *mtd;
 	struct resource *r;
 	int size, err;
-	unsigned long onenand_ctrl_cfg = 0;
 
 	pdata = pdev->dev.platform_data;
 	/* No need to check pdata. the platform data is optional */
@@ -900,14 +906,6 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 		}
 
 		onenand->phys_base = onenand->base_res->start;
-
-		onenand_ctrl_cfg = readl(onenand->dma_addr + 0x100);
-		if ((onenand_ctrl_cfg & ONENAND_SYS_CFG1_SYNC_WRITE) &&
-		    onenand->dma_addr)
-			writel(onenand_ctrl_cfg & ~ONENAND_SYS_CFG1_SYNC_WRITE,
-					onenand->dma_addr + 0x100);
-		else
-			onenand_ctrl_cfg = 0;
 	}
 
 	if (onenand_scan(mtd, 1)) {
@@ -915,10 +913,7 @@ static int s3c_onenand_probe(struct platform_device *pdev)
 		goto scan_failed;
 	}
 
-	if (onenand->type == TYPE_S5PC110) {
-		if (onenand_ctrl_cfg && onenand->dma_addr)
-			writel(onenand_ctrl_cfg, onenand->dma_addr + 0x100);
-	} else {
+	if (onenand->type != TYPE_S5PC110) {
 		/* S3C doesn't handle subpage write */
 		mtd->subpage_sft = 0;
 		this->subpagesize = mtd->writesize;
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 2d600a1bf2aa..7a87d07cd79f 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,6 +1,24 @@
 /*
  * Parse RedBoot-style Flash Image System (FIS) tables and
  * produce a Linux partition array to match.
+ *
+ * Copyright © 2001      Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index 63b83c0d9a13..cc4d1805b864 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -1,7 +1,7 @@
 /*
  * rfd_ftl.c -- resident flash disk (flash translation layer)
  *
- * Copyright (C) 2005  Sean Young <sean@mess.org>
+ * Copyright © 2005  Sean Young <sean@mess.org>
  *
  * This type of flash translation layer (FTL) is used by the Embedded BIOS
  * by General Software. It is known as the Resident Flash Disk (RFD), see:
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
index 81c4ecdc11f5..5cd189793332 100644
--- a/drivers/mtd/ssfdc.c
+++ b/drivers/mtd/ssfdc.c
@@ -1,6 +1,6 @@
 /*
  * Linux driver for SSFDC Flash Translation Layer (Read only)
- * (c) 2005 Eptar srl
+ * © 2005 Eptar srl
  * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
  *
  * Based on NTFL and MTDBLOCK_RO drivers
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 6bc1b8276c62..00b937e38c1d 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -310,7 +310,7 @@ static int crosstest(void)
 static int erasecrosstest(void)
 {
 	size_t read = 0, written = 0;
-	int err = 0, i, ebnum, ok = 1, ebnum2;
+	int err = 0, i, ebnum, ebnum2;
 	loff_t addr0;
 	char *readbuf = twopages;
 
@@ -357,8 +357,7 @@ static int erasecrosstest(void)
 	if (memcmp(writebuf, readbuf, pgsize)) {
 		printk(PRINT_PREF "verify failed!\n");
 		errcnt += 1;
-		ok = 0;
-		return err;
+		return -1;
 	}
 
 	printk(PRINT_PREF "erasing block %d\n", ebnum);
@@ -396,10 +395,10 @@ static int erasecrosstest(void)
 	if (memcmp(writebuf, readbuf, pgsize)) {
 		printk(PRINT_PREF "verify failed!\n");
 		errcnt += 1;
-		ok = 0;
+		return -1;
 	}
 
-	if (ok && !err)
+	if (!err)
 		printk(PRINT_PREF "erasecrosstest ok\n");
 	return err;
 }
author	Linus Torvalds <torvalds@linux-foundation.org>	2010-08-10 20:49:21 +0200
committer	Linus Torvalds <torvalds@linux-foundation.org>	2010-08-10 20:49:21 +0200
commit	e8a89cebdbaab14caaa26debdb4ffd493b8831af (patch)
tree	e0843f082628408ce259c72db36da54dff603987 /drivers/mtd
parent	Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bco... (diff)
parent	mtd: Remove obsolete <mtd/compatmac.h> include (diff)
download	linux-e8a89cebdbaab14caaa26debdb4ffd493b8831af.tar.xz linux-e8a89cebdbaab14caaa26debdb4ffd493b8831af.zip