summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
authorArtem Bityutskiy <Artem.Bityutskiy@nokia.com>2010-09-03 01:11:20 +0200
committerArtem Bityutskiy <Artem.Bityutskiy@nokia.com>2010-10-19 16:19:56 +0200
commit74d82d2660058e32644f0c673656b2a1d01d3688 (patch)
tree8b90af4d6014ea50d74c504dc832cf3a9c3fff10 /drivers/mtd
parentUBI: rename IO error code (diff)
downloadlinux-74d82d2660058e32644f0c673656b2a1d01d3688.tar.xz
linux-74d82d2660058e32644f0c673656b2a1d01d3688.zip
UBI: remove duplicate IO error codes
The 'UBI_IO_PEB_EMPTY' and 'UBI_IO_PEB_FREE' are essentially the same and mean that there are only 0xFF bytes instead of headers. Simplify UBI a little by turning them into a single 'UBI_IO_FF' error code. Also, stop maintaining commentaries in 'ubi_io_read_vid_hdr()' which are almost identical to commentaries in 'ubi_io_read_ec_hdr()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/ubi/io.c45
-rw-r--r--drivers/mtd/ubi/scan.c6
-rw-r--r--drivers/mtd/ubi/ubi.h8
-rw-r--r--drivers/mtd/ubi/wl.c2
4 files changed, 13 insertions, 48 deletions
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 05774da4abca..1677a215af64 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -714,7 +714,7 @@ bad:
* o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error);
* o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was
* a data integrity error (uncorrectable ECC error in case of NAND);
- * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
+ * o %UBI_IO_FF if only 0xFF bytes were read (the PEB is supposedly empty)
* o a negative error code in case of failure.
*/
int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
@@ -762,7 +762,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
else if (UBI_IO_DEBUG)
dbg_msg("no EC header found at PEB %d, "
"only 0xFF bytes", pnum);
- return UBI_IO_PEB_EMPTY;
+ return UBI_IO_FF;
}
/*
@@ -977,19 +977,11 @@ bad:
*
* This function reads the volume identifier header from physical eraseblock
* @pnum and stores it in @vid_hdr. It also checks CRC checksum of the read
- * volume identifier header. The following codes may be returned:
+ * volume identifier header. The error codes are the same as in
+ * 'ubi_io_read_ec_hdr()'.
*
- * o %0 if the CRC checksum is correct and the header was successfully read;
- * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
- * and corrected by the flash driver; this is harmless but may indicate that
- * this eraseblock may become bad soon;
- * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC
- * error detected);
- * o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was
- * a data integrity error (uncorrectable ECC error in case of NAND);
- * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
- * header there);
- * o a negative error code in case of failure.
+ * Note, the implementation of this function is also very similar to
+ * 'ubi_io_read_ec_hdr()', so refer commentaries in 'ubi_io_read_ec_hdr()'.
*/
int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
struct ubi_vid_hdr *vid_hdr, int verbose)
@@ -1008,15 +1000,6 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
return err;
- /*
- * We read all the data, but either a correctable bit-flip
- * occurred, or MTD reported a data integrity error
- * (uncorrectable ECC error in case of NAND). The former is
- * harmless, the later may mean that the read data is
- * corrupted. But we have a CRC check-sum and we will detect
- * this. If the VID header is still OK, we just report this as
- * there was a bit-flip, to force scrubbing.
- */
if (err == -EBADMSG)
read_err = UBI_IO_BAD_HDR_EBADMSG;
}
@@ -1026,25 +1009,16 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
if (read_err)
return read_err;
- /*
- * If we have read all 0xFF bytes, the VID header probably does
- * not exist and the physical eraseblock is assumed to be free.
- */
if (check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
- /* The physical eraseblock is supposedly free */
if (verbose)
ubi_warn("no VID header found at PEB %d, "
"only 0xFF bytes", pnum);
else if (UBI_IO_DEBUG)
dbg_msg("no VID header found at PEB %d, "
"only 0xFF bytes", pnum);
- return UBI_IO_PEB_FREE;
+ return UBI_IO_FF;
}
- /*
- * This is not a valid VID header, and these are not 0xFF
- * bytes. Report that the header is corrupted.
- */
if (verbose) {
ubi_warn("bad magic number at PEB %d: %08x instead of "
"%08x", pnum, magic, UBI_VID_HDR_MAGIC);
@@ -1069,17 +1043,12 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
return read_err ?: UBI_IO_BAD_HDR;
}
- /* Validate the VID header that we have just read */
err = validate_vid_hdr(ubi, vid_hdr);
if (err) {
ubi_err("validation failed for PEB %d", pnum);
return -EINVAL;
}
- /*
- * If there was a read error (%-EBADMSG), but the header CRC is still
- * OK, report about a bit-flip to force scrubbing on this PEB.
- */
return read_err ? UBI_IO_BITFLIPS : 0;
}
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 7e7c56d162ec..37cb18ff10c6 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -748,7 +748,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
return err;
else if (err == UBI_IO_BITFLIPS)
bitflips = 1;
- else if (err == UBI_IO_PEB_EMPTY)
+ else if (err == UBI_IO_FF)
return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, &si->erase);
else if (err == UBI_IO_BAD_HDR_EBADMSG || err == UBI_IO_BAD_HDR) {
/*
@@ -817,7 +817,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
else if (err == UBI_IO_BITFLIPS)
bitflips = 1;
else if (err == UBI_IO_BAD_HDR_EBADMSG || err == UBI_IO_BAD_HDR ||
- (err == UBI_IO_PEB_FREE && ec_corr)) {
+ (err == UBI_IO_FF && ec_corr)) {
/* VID header is corrupted */
if (err == UBI_IO_BAD_HDR_EBADMSG ||
ec_corr == UBI_IO_BAD_HDR_EBADMSG)
@@ -826,7 +826,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
if (err)
return err;
goto adjust_mean_ec;
- } else if (err == UBI_IO_PEB_FREE) {
+ } else if (err == UBI_IO_FF) {
/* No VID header - the physical eraseblock is free */
err = add_to_list(si, pnum, ec, &si->free);
if (err)
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 24a7c7647cb7..774bdcad6a07 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -85,10 +85,7 @@
/*
* Error codes returned by the I/O sub-system.
*
- * UBI_IO_PEB_EMPTY: the physical eraseblock is empty, i.e. it contains only
- * %0xFF bytes
- * UBI_IO_PEB_FREE: the physical eraseblock is free, i.e. it contains only a
- * valid erase counter header, and the rest are %0xFF bytes
+ * UBI_IO_FF: the read region of flash contains only 0xFFs
* UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC)
* UBI_IO_BAD_HDR_EBADMSG: the same as %UBI_IO_BAD_HDR, but also there was a
* data integrity error reported by the MTD driver
@@ -96,8 +93,7 @@
* UBI_IO_BITFLIPS: bit-flips were detected and corrected
*/
enum {
- UBI_IO_PEB_EMPTY = 1,
- UBI_IO_PEB_FREE,
+ UBI_IO_FF = 1,
UBI_IO_BAD_HDR,
UBI_IO_BAD_HDR_EBADMSG,
UBI_IO_BITFLIPS
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 97a435672eaf..a9e7c9eed703 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -745,7 +745,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
err = ubi_io_read_vid_hdr(ubi, e1->pnum, vid_hdr, 0);
if (err && err != UBI_IO_BITFLIPS) {
- if (err == UBI_IO_PEB_FREE) {
+ if (err == UBI_IO_FF) {
/*
* We are trying to move PEB without a VID header. UBI
* always write VID headers shortly after the PEB was