diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/Kconfig | |
| download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 2538 |
1 files changed, 2538 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig new file mode 100644 index 000000000000..74d57865a819 --- /dev/null +++ b/drivers/net/Kconfig @@ -0,0 +1,2538 @@ + +# +# Network device configuration +# + +config NETDEVICES + depends on NET + bool "Network device support" + ---help--- + You can say N here if you don't intend to connect your Linux box to + any other computer at all. + + You'll have to say Y if your computer contains a network card that + you want to use under Linux. If you are going to run SLIP or PPP over + telephone line or null modem cable you need say Y here. Connecting + two machines with parallel ports using PLIP needs this, as well as + AX.25/KISS for sending Internet traffic over amateur radio links. + + See also "The Linux Network Administrator's Guide" by Olaf Kirch and + Terry Dawson. Available at <http://www.tldp.org/guides.html>. + + If unsure, say Y. + +config DUMMY + tristate "Dummy net driver support" + depends on NETDEVICES + ---help--- + This is essentially a bit-bucket device (i.e. traffic you send to + this device is consigned into oblivion) with a configurable IP + address. It is most commonly used in order to make your currently + inactive SLIP address seem like a real address for local programs. + If you use SLIP or PPP, you might want to say Y here. Since this + thing often comes in handy, the default is Y. It won't enlarge your + kernel either. What a deal. Read about it in the Network + Administrator's Guide, available from + <http://www.tldp.org/docs.html#guide>. + + To compile this driver as a module, choose M here: the module + will be called dummy. If you want to use more than one dummy + device at a time, you need to compile this driver as a module. + Instead of 'dummy', the devices will then be called 'dummy0', + 'dummy1' etc. + +config BONDING + tristate "Bonding driver support" + depends on NETDEVICES + depends on INET + ---help--- + Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet + Channels together. This is called 'Etherchannel' by Cisco, + 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. + + The driver supports multiple bonding modes to allow for both high + perfomance and high availability operation. + + Refer to <file:Documentation/networking/bonding.txt> for more + information. + + To compile this driver as a module, choose M here: the module + will be called bonding. + +config EQUALIZER + tristate "EQL (serial line load balancing) support" + depends on NETDEVICES + ---help--- + If you have two serial connections to some other computer (this + usually requires two modems and two telephone lines) and you use + SLIP (the protocol for sending Internet traffic over telephone + lines) or PPP (a better SLIP) on them, you can make them behave like + one double speed connection using this driver. Naturally, this has + to be supported at the other end as well, either with a similar EQL + Linux driver or with a Livingston Portmaster 2e. + + Say Y if you want this and read + <file:Documentation/networking/eql.txt>. You may also want to read + section 6.2 of the NET-3-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here: the module + will be called eql. If unsure, say N. + +config TUN + tristate "Universal TUN/TAP device driver support" + depends on NETDEVICES + select CRC32 + ---help--- + TUN/TAP provides packet reception and transmission for user space + programs. It can be viewed as a simple Point-to-Point or Ethernet + device, which instead of receiving packets from a physical media, + receives them from user space program and instead of sending packets + via physical media writes them to the user space program. + + When a program opens /dev/net/tun, driver creates and registers + corresponding net device tunX or tapX. After a program closed above + devices, driver will automatically delete tunXX or tapXX device and + all routes corresponding to it. + + Please read <file:Documentation/networking/tuntap.txt> for more + information. + + To compile this driver as a module, choose M here: the module + will be called tun. + + If you don't know what to use this for, you don't need it. + +config NET_SB1000 + tristate "General Instruments Surfboard 1000" + depends on NETDEVICES && PNP + ---help--- + This is a driver for the General Instrument (also known as + NextLevel) SURFboard 1000 internal + cable modem. This is an ISA card which is used by a number of cable + TV companies to provide cable modem access. It's a one-way + downstream-only cable modem, meaning that your upstream net link is + provided by your regular phone modem. + + At present this driver only compiles as a module, so say M here if + you have this card. The module will be called sb1000. Then read + <file:Documentation/networking/README.sb1000> for information on how + to use this module, as it needs special ppp scripts for establishing + a connection. Further documentation and the necessary scripts can be + found at: + + <http://www.jacksonville.net/~fventuri/> + <http://home.adelphia.net/~siglercm/sb1000.html> + <http://linuxpower.cx/~cable/> + + If you don't have this card, of course say N. + +if NETDEVICES + source "drivers/net/arcnet/Kconfig" +endif + +# +# Ethernet +# + +menu "Ethernet (10 or 100Mbit)" + depends on NETDEVICES && !UML + +config NET_ETHERNET + bool "Ethernet (10 or 100Mbit)" + ---help--- + Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common + type of Local Area Network (LAN) in universities and companies. + + Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over + coaxial cable, linking computers in a chain), 10BASE-T or twisted + pair (10 Mbps over twisted pair cable, linking computers to central + hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs), + 100BASE-TX (100 Mbps over two twisted pair cables, using hubs), + 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair + cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links) + [the 100BASE varieties are also known as Fast Ethernet], and Gigabit + Ethernet (1 Gbps over optical fiber or short copper links). + + If your Linux machine will be connected to an Ethernet and you have + an Ethernet network interface card (NIC) installed in your computer, + say Y here and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. You will then also have + to say Y to the driver for your particular NIC. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Ethernet network cards. If unsure, say N. + +config MII + tristate "Generic Media Independent Interface device support" + depends on NET_ETHERNET + help + Most ethernet controllers have MII transceiver either as an external + or internal device. It is safe to say Y or M here even if your + ethernet card lack MII. + +source "drivers/net/arm/Kconfig" + +config MACE + tristate "MACE (Power Mac ethernet) support" + depends on NET_ETHERNET && PPC_PMAC && PPC32 + select CRC32 + help + Power Macintoshes and clones with Ethernet built-in on the + motherboard will usually use a MACE (Medium Access Control for + Ethernet) interface. Say Y to include support for the MACE chip. + + To compile this driver as a module, choose M here: the module + will be called mace. + +config MACE_AAUI_PORT + bool "Use AAUI port instead of TP by default" + depends on MACE + help + Some Apple machines (notably the Apple Network Server) which use the + MACE ethernet chip have an Apple AUI port (small 15-pin connector), + instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say + Y here if you have such a machine. If unsure, say N. + The driver will default to AAUI on ANS anyway, and if you use it as + a module, you can provide the port_aaui=0|1 to force the driver. + +config BMAC + tristate "BMAC (G3 ethernet) support" + depends on NET_ETHERNET && PPC_PMAC && PPC32 + select CRC32 + help + Say Y for support of BMAC Ethernet interfaces. These are used on G3 + computers. + + To compile this driver as a module, choose M here: the module + will be called bmac. + +config OAKNET + tristate "National DP83902AV (Oak ethernet) support" + depends on NET_ETHERNET && PPC && BROKEN + select CRC32 + help + Say Y if your machine has this type of Ethernet network card. + + To compile this driver as a module, choose M here: the module + will be called oaknet. + +config ARIADNE + tristate "Ariadne support" + depends on NET_ETHERNET && ZORRO + help + If you have a Village Tronic Ariadne Ethernet adapter, say Y. + Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called ariadne. + +config A2065 + tristate "A2065 support" + depends on NET_ETHERNET && ZORRO + select CRC32 + help + If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the module + will be called a2065. + +config HYDRA + tristate "Hydra support" + depends on NET_ETHERNET && ZORRO + select CRC32 + help + If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called hydra. + +config ZORRO8390 + tristate "Zorro NS8390-based Ethernet support" + depends on NET_ETHERNET && ZORRO + select CRC32 + help + This driver is for Zorro Ethernet cards using an NS8390-compatible + chipset, like the Village Tronic Ariadne II and the Individual + Computers X-Surf Ethernet cards. If you have such a card, say Y. + Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called zorro8390. + +config APNE + tristate "PCMCIA NE2000 support" + depends on NET_ETHERNET && AMIGA_PCMCIA + select CRC32 + help + If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the module + will be called apne. + +config APOLLO_ELPLUS + tristate "Apollo 3c505 support" + depends on NET_ETHERNET && APOLLO + help + Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card. + If you don't have one made for Apollos, you can use one from a PC, + except that your Apollo won't be able to boot from it (because the + code in the ROM will be for a PC). + +config MAC8390 + bool "Macintosh NS 8390 based ethernet cards" + depends on NET_ETHERNET && MAC + select CRC32 + help + If you want to include a driver to support Nubus or LC-PDS + Ethernet cards using an NS8390 chipset or its equivalent, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +config MAC89x0 + tristate "Macintosh CS89x0 based ethernet cards" + depends on NET_ETHERNET && MAC && BROKEN + ---help--- + Support for CS89x0 chipset based Ethernet cards. If you have a + Nubus or LC-PDS network (Ethernet) card of this type, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. This module will + be called mac89x0. + +config MACSONIC + tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)" + depends on NET_ETHERNET && MAC + ---help--- + Support for NatSemi SONIC based Ethernet devices. This includes + the onboard Ethernet in many Quadras as well as some LC-PDS, + a few Nubus and all known Comm Slot Ethernet cards. If you have + one of these say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. This module will + be called macsonic. + +config MACMACE + bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)" + depends on NET_ETHERNET && MAC && EXPERIMENTAL + select CRC32 + help + Support for the onboard AMD 79C940 MACE Ethernet controller used in + the 660AV and 840AV Macintosh. If you have one of these Macintoshes + say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +config MVME147_NET + tristate "MVME147 (Lance) Ethernet support" + depends on NET_ETHERNET && MVME147 + select CRC32 + help + Support for the on-board Ethernet interface on the Motorola MVME147 + single-board computer. Say Y here to include the + driver for this chip in your kernel. + To compile this driver as a module, choose M here. + +config MVME16x_NET + tristate "MVME16x Ethernet support" + depends on NET_ETHERNET && MVME16x + help + This is the driver for the Ethernet interface on the Motorola + MVME162, 166, 167, 172 and 177 boards. Say Y here to include the + driver for this chip in your kernel. + To compile this driver as a module, choose M here. + +config BVME6000_NET + tristate "BVME6000 Ethernet support" + depends on NET_ETHERNET && BVME6000 + help + This is the driver for the Ethernet interface on BVME4000 and + BVME6000 VME boards. Say Y here to include the driver for this chip + in your kernel. + To compile this driver as a module, choose M here. + +config ATARILANCE + tristate "Atari Lance support" + depends on NET_ETHERNET && ATARI + help + Say Y to include support for several Atari Ethernet adapters based + on the AMD Lance chipset: RieblCard (with or without battery), or + PAMCard VME (also the version by Rhotron, with different addresses). + +config ATARI_BIONET + tristate "BioNet-100 support" + depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN + help + Say Y to include support for BioData's BioNet-100 Ethernet adapter + for the ACSI port. The driver works (has to work...) with a polled + I/O scheme, so it's rather slow :-( + +config ATARI_PAMSNET + tristate "PAMsNet support" + depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN + help + Say Y to include support for the PAMsNet Ethernet adapter for the + ACSI port ("ACSI node"). The driver works (has to work...) with a + polled I/O scheme, so it's rather slow :-( + +config SUN3LANCE + tristate "Sun3/Sun3x on-board LANCE support" + depends on NET_ETHERNET && (SUN3 || SUN3X) + help + Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) + featured an AMD Lance 10Mbit Ethernet controller on board; say Y + here to compile in the Linux driver for this and enable Ethernet. + General Linux information on the Sun 3 and 3x series (now + discontinued) is at + <http://www.angelfire.com/ca2/tech68k/sun3.html>. + + If you're not building a kernel for a Sun 3, say N. + +config SUN3_82586 + tristate "Sun3 on-board Intel 82586 support" + depends on NET_ETHERNET && SUN3 + help + This driver enables support for the on-board Intel 82586 based + Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note + that this driver does not support 82586-based adapters on additional + VME boards. + +config HPLANCE + bool "HP on-board LANCE support" + depends on NET_ETHERNET && DIO + select CRC32 + help + If you want to use the builtin "LANCE" Ethernet controller on an + HP300 machine, say Y here. + +config LASI_82596 + tristate "Lasi ethernet" + depends on NET_ETHERNET && PARISC && GSC_LASI + help + Say Y here to support the on-board Intel 82596 ethernet controller + built into Hewlett-Packard PA-RISC machines. + +config MIPS_JAZZ_SONIC + tristate "MIPS JAZZ onboard SONIC Ethernet support" + depends on NET_ETHERNET && MACH_JAZZ + help + This is the driver for the onboard card of MIPS Magnum 4000, + Acer PICA, Olivetti M700-10 and a few other identical OEM systems. + +config MIPS_GT96100ETH + bool "MIPS GT96100 Ethernet support" + depends on NET_ETHERNET && MIPS_GT96100 + help + Say Y here to support the Ethernet subsystem on your GT96100 card. + +config MIPS_AU1X00_ENET + bool "MIPS AU1000 Ethernet support" + depends on NET_ETHERNET && SOC_AU1X00 + select CRC32 + help + If you have an Alchemy Semi AU1X00 based system + say Y. Otherwise, say N. + +config NET_SB1250_MAC + tristate "SB1250 Ethernet support" + depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC + +config SGI_IOC3_ETH + bool "SGI IOC3 Ethernet" + depends on NET_ETHERNET && PCI && SGI_IP27 + select CRC32 + select MII + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +config SGI_IOC3_ETH_HW_RX_CSUM + bool "Receive hardware checksums" + depends on SGI_IOC3_ETH && INET + default y + help + The SGI IOC3 network adapter supports TCP and UDP checksums in + hardware to offload processing of these checksums from the CPU. At + the moment only acceleration of IPv4 is supported. This option + enables offloading for checksums on receive. If unsure, say Y. + +config SGI_IOC3_ETH_HW_TX_CSUM + bool "Transmit hardware checksums" + depends on SGI_IOC3_ETH && INET + default y + help + The SGI IOC3 network adapter supports TCP and UDP checksums in + hardware to offload processing of these checksums from the CPU. At + the moment only acceleration of IPv4 is supported. This option + enables offloading for checksums on transmit. If unsure, say Y. + +config SGI_O2MACE_ETH + tristate "SGI O2 MACE Fast Ethernet support" + depends on NET_ETHERNET && SGI_IP32=y + +config STNIC + tristate "National DP83902AV support" + depends on NET_ETHERNET && SUPERH + select CRC32 + help + Support for cards based on the National Semiconductor DP83902AV + ST-NIC Serial Network Interface Controller for Twisted Pair. This + is a 10Mbit/sec Ethernet controller. Product overview and specs at + <http://www.national.com/pf/DP/DP83902A.html>. + + If unsure, say N. + +config SUNLANCE + tristate "Sun LANCE support" + depends on NET_ETHERNET && SBUS + select CRC32 + help + This driver supports the "le" interface present on all 32-bit Sparc + systems, on some older Ultra systems and as an Sbus option. These + cards are based on the AMD Lance chipset, which is better known + via the NE2100 cards. + + To compile this driver as a module, choose M here: the module + will be called sunlance. + +config HAPPYMEAL + tristate "Sun Happy Meal 10/100baseT support" + depends on NET_ETHERNET && (SBUS || PCI) + select CRC32 + help + This driver supports the "hme" interface present on most Ultra + systems and as an option on older Sbus systems. This driver supports + both PCI and Sbus devices. This driver also supports the "qfe" quad + 100baseT device available in both PCI and Sbus configurations. + + To compile this driver as a module, choose M here: the module + will be called sunhme. + +config SUNBMAC + tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)" + depends on NET_ETHERNET && SBUS && EXPERIMENTAL + select CRC32 + help + This driver supports the "be" interface available as an Sbus option. + This is Sun's older 100baseT Ethernet device. + + To compile this driver as a module, choose M here: the module + will be called sunbmac. + +config SUNQE + tristate "Sun QuadEthernet support" + depends on NET_ETHERNET && SBUS + select CRC32 + help + This driver supports the "qe" 10baseT Ethernet device, available as + an Sbus option. Note that this is not the same as Quad FastEthernet + "qfe" which is supported by the Happy Meal driver instead. + + To compile this driver as a module, choose M here: the module + will be called sunqe. + +config SUNGEM + tristate "Sun GEM support" + depends on NET_ETHERNET && PCI + select CRC32 + help + Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also + <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>. + +config NET_VENDOR_3COM + bool "3COM cards" + depends on NET_ETHERNET && (ISA || EISA || MCA || PCI) + help + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about 3COM cards. If you say Y, you will be asked for + your specific card in the following questions. + +config EL1 + tristate "3c501 \"EtherLink\" support" + depends on NET_VENDOR_3COM && ISA + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Also, consider buying a + new card, since the 3c501 is slow, broken, and obsolete: you will + have problems. Some people suggest to ping ("man ping") a nearby + machine every minute ("man cron") when using this card. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c501. + +config EL2 + tristate "3c503 \"EtherLink II\" support" + depends on NET_VENDOR_3COM && ISA + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c503. + +config ELPLUS + tristate "3c505 \"EtherLink Plus\" support" + depends on NET_VENDOR_3COM && ISA + ---help--- + Information about this network (Ethernet) card can be found in + <file:Documentation/networking/3c505.txt>. If you have a card of + this type, say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c505. + +config EL16 + tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" + depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c507. + +config EL3 + tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" + depends on NET_VENDOR_3COM && (ISA || EISA || MCA) + ---help--- + If you have a network (Ethernet) card belonging to the 3Com + EtherLinkIII series, say Y and read the Ethernet-HOWTO, available + from <http://www.tldp.org/docs.html#howto>. + + If your card is not working you may need to use the DOS + setup disk to disable Plug & Play mode, and to select the default + media type. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c509. + +config 3C515 + tristate "3c515 ISA \"Fast EtherLink\"" + depends on NET_VENDOR_3COM && (ISA || EISA) + help + If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet + network card, say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c515. + +config ELMC + tristate "3c523 \"EtherLink/MC\" support" + depends on NET_VENDOR_3COM && MCA_LEGACY + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c523. + +config ELMC_II + tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)" + depends on NET_VENDOR_3COM && MCA && MCA_LEGACY + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called 3c527. + +config VORTEX + tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" + depends on NET_VENDOR_3COM && (PCI || EISA) + select MII + ---help--- + This option enables driver support for a large number of 10mbps and + 10/100mbps EISA, PCI and PCMCIA 3Com network cards: + + "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI + "Boomerang" (EtherLink XL 3c900 or 3c905) PCI + "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus + "Tornado" (3c905) PCI + "Hurricane" (3c555/3cSOHO) PCI + + If you have such a card, say Y and read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. More + specific information is in + <file:Documentation/networking/vortex.txt> and in the comments at + the beginning of <file:drivers/net/3c59x.c>. + + To compile this support as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. + +config TYPHOON + tristate "3cr990 series \"Typhoon\" support" + depends on NET_VENDOR_3COM && PCI + select CRC32 + ---help--- + This option enables driver support for the 3cr990 series of cards: + + 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97, + 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server, + 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR + + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called typhoon. + +config LANCE + tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" + depends on NET_ETHERNET && ISA + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are + of this type. + + To compile this driver as a module, choose M here: the module + will be called lance. This is recommended. + +config NET_VENDOR_SMC + bool "Western Digital/SMC cards" + depends on NET_ETHERNET && (ISA || MCA || EISA || MAC) + help + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Western Digital cards. If you say Y, you will be + asked for your specific card in the following questions. + +config WD80x3 + tristate "WD80*3 support" + depends on NET_VENDOR_SMC && ISA + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called wd. + +config ULTRAMCA + tristate "SMC Ultra MCA support" + depends on NET_VENDOR_SMC && MCA + select CRC32 + help + If you have a network (Ethernet) card of this type and are running + an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smc-mca. + +config ULTRA + tristate "SMC Ultra support" + depends on NET_VENDOR_SMC && ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Important: There have been many reports that, with some motherboards + mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, + such as some BusLogic models) causes corruption problems with many + operating systems. The Linux smc-ultra driver has a work-around for + this but keep it in mind if you have such a SCSI card and have + problems. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smc-ultra. + +config ULTRA32 + tristate "SMC Ultra32 EISA support" + depends on NET_VENDOR_SMC && EISA + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smc-ultra32. + +config SMC91X + tristate "SMC 91C9x/91C1xxx support" + select CRC32 + select MII + depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH) + help + This is a driver for SMC's 91x series of Ethernet chipsets, + including the SMC91C94 and the SMC91C111. Say Y if you want it + compiled into the kernel, and read the file + <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, + available from <http://www.linuxdoc.org/docs.html#howto>. + + This driver is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called smc91x. If you want to compile it as a + module, say M here and read <file:Documentation/modules.txt> as well + as <file:Documentation/networking/net-modules.txt>. + +config SMC9194 + tristate "SMC 9194 support" + depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) + select CRC32 + ---help--- + This is support for the SMC9xxx based Ethernet cards. Choose this + option if you have a DELL laptop with the docking station, or + another SMC9192/9194 based chipset. Say Y if you want it compiled + into the kernel, and read the file + <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smc9194. + +config NET_VENDOR_RACAL + bool "Racal-Interlan (Micom) NI cards" + depends on NET_ETHERNET && ISA + help + If you have a network (Ethernet) card belonging to this class, such + as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about NI cards. If you say Y, you will be asked for + your specific card in the following questions. + +config NI5010 + tristate "NI5010 support (EXPERIMENTAL)" + depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Note that this is still + experimental code. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ni5010. + +config NI52 + tristate "NI5210 support" + depends on NET_VENDOR_RACAL && ISA + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ni52. + +config NI65 + tristate "NI6510 support" + depends on NET_VENDOR_RACAL && ISA + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ni65. + +source "drivers/net/tulip/Kconfig" + +config AT1700 + tristate "AT1700/1720 support (EXPERIMENTAL)" + depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called at1700. + +config DEPCA + tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" + depends on NET_ETHERNET && (ISA || EISA || MCA) + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto> as well as + <file:drivers/net/depca.c>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called depca. + +config HP100 + tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support" + depends on NET_ETHERNET && (ISA || EISA || PCI) + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called hp100. + +config NET_ISA + bool "Other ISA cards" + depends on NET_ETHERNET && ISA + ---help--- + If your network (Ethernet) card hasn't been mentioned yet and its + bus system (that's the way the cards talks to the other components + of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y. + Make sure you know the name of your card. Read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + If unsure, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the remaining ISA network card questions. If you say Y, you will be + asked for your specific card in the following questions. + +config E2100 + tristate "Cabletron E21xx support" + depends on NET_ISA + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called e2100. + +config EWRK3 + tristate "EtherWORKS 3 (DE203, DE204, DE205) support" + depends on NET_ISA + select CRC32 + ---help--- + This driver supports the DE203, DE204 and DE205 network (Ethernet) + cards. If this is for you, say Y and read + <file:Documentation/networking/ewrk3.txt> in the kernel source as + well as the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ewrk3. + +config EEXPRESS + tristate "EtherExpress 16 support" + depends on NET_ISA + ---help--- + If you have an EtherExpress16 network (Ethernet) card, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Note that the Intel + EtherExpress16 card used to be regarded as a very poor choice + because the driver was very unreliable. We now have a new driver + that should do better. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called eexpress. + +config EEXPRESS_PRO + tristate "EtherExpressPro support/EtherExpress 10 (i82595) support" + depends on NET_ISA + ---help--- + If you have a network (Ethernet) card of this type, say Y. This + driver supports intel i82595{FX,TX} based boards. Note however + that the EtherExpress PRO/100 Ethernet card has its own separate + driver. Please read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called eepro. + +config FMV18X + tristate "FMV-181/182/183/184 support (OBSOLETE)" + depends on NET_ISA && OBSOLETE + ---help--- + If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card, + say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + If you use an FMV-183 or FMV-184 and it is not working, you may need + to disable Plug & Play mode of the card. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called fmv18x. + +config HPLAN_PLUS + tristate "HP PCLAN+ (27247B and 27252A) support" + depends on NET_ISA + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called hp-plus. + +config HPLAN + tristate "HP PCLAN (27245 and other 27xxx series) support" + depends on NET_ISA + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called hp. + +config LP486E + tristate "LP486E on board Ethernet" + depends on NET_ISA + help + Say Y here to support the 82596-based on-board Ethernet controller + for the Panther motherboard, which is one of the two shipped in the + Intel Professional Workstation. + +config ETH16I + tristate "ICL EtherTeam 16i/32 support" + depends on NET_ISA + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called eth16i. + +config NE2000 + tristate "NE2000/NE1000 support" + depends on NET_ISA || (Q40 && m) || M32R + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Many Ethernet cards + without a specific driver are compatible with NE2000. + + If you have a PCI NE2000 card however, say N here and Y to "PCI + NE2000 support", above. If you have a NE2000 card and are running on + an MCA system (a bus system used on some IBM PS/2 computers and + laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", + below. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ne. + +config ZNET + tristate "Zenith Z-Note support (EXPERIMENTAL)" + depends on NET_ISA && EXPERIMENTAL + help + The Zenith Z-Note notebook computer has a built-in network + (Ethernet) card, and this is the Linux driver for it. Note that the + IBM Thinkpad 300 is compatible with the Z-Note and is also supported + by this driver. Read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +config SEEQ8005 + tristate "SEEQ8005 support (EXPERIMENTAL)" + depends on NET_ISA && EXPERIMENTAL + help + This is a driver for the SEEQ 8005 network (Ethernet) card. If this + is for you, read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called seeq8005. + +config SK_G16 + tristate "SK_G16 support (OBSOLETE)" + depends on NET_ISA && OBSOLETE + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +config SKMC + tristate "SKnet MCA support" + depends on NET_ETHERNET && MCA && BROKEN + ---help--- + These are Micro Channel Ethernet adapters. You need to say Y to "MCA + support" in order to use this driver. Supported cards are the SKnet + Junior MC2 and the SKnet MC2(+). The driver automatically + distinguishes between the two cards. Note that using multiple boards + of different type hasn't been tested with this driver. Say Y if you + have one of these Ethernet adapters. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called sk_mca. + +config NE2_MCA + tristate "NE/2 (ne2000 MCA version) support" + depends on NET_ETHERNET && MCA_LEGACY + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ne2. + +config IBMLANA + tristate "IBM LAN Adapter/A support" + depends on NET_ETHERNET && MCA && MCA_LEGACY + ---help--- + This is a Micro Channel Ethernet adapter. You need to set + CONFIG_MCA to use this driver. It is both available as an in-kernel + driver and as a module. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The only + currently supported card is the IBM LAN Adapter/A for Ethernet. It + will both support 16K and 32K memory windows, however a 32K window + gives a better security against packet losses. Usage of multiple + boards with this driver should be possible, but has not been tested + up to now due to lack of hardware. + +config IBMVETH + tristate "IBM LAN Virtual Ethernet support" + depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES + ---help--- + This driver supports virtual ethernet adapters on newer IBM iSeries + and pSeries systems. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will + be called ibmveth. + +config IBM_EMAC + tristate "IBM PPC4xx EMAC driver support" + depends on 4xx + select CRC32 + ---help--- + This driver supports the IBM PPC4xx EMAC family of on-chip + Ethernet controllers. + +config IBM_EMAC_ERRMSG + bool "Verbose error messages" + depends on IBM_EMAC + +config IBM_EMAC_RXB + int "Number of receive buffers" + depends on IBM_EMAC + default "128" if IBM_EMAC4 + default "64" + +config IBM_EMAC_TXB + int "Number of transmit buffers" + depends on IBM_EMAC + default "128" if IBM_EMAC4 + default "8" + +config IBM_EMAC_FGAP + int "Frame gap" + depends on IBM_EMAC + default "8" + +config IBM_EMAC_SKBRES + int "Skb reserve amount" + depends on IBM_EMAC + default "0" + +config NET_PCI + bool "EISA, VLB, PCI and on board controllers" + depends on NET_ETHERNET && (ISA || EISA || PCI) + help + This is another class of network cards which attach directly to the + bus. If you have one of those, say Y and read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about this class of network cards. If you say Y, you + will be asked for your specific card in the following questions. If + you are unsure, say Y. + +config PCNET32 + tristate "AMD PCnet32 PCI support" + depends on NET_PCI && PCI + select CRC32 + select MII + help + If you have a PCnet32 or PCnetPCI based network (Ethernet) card, + answer Y here and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called pcnet32. + +config AMD8111_ETH + tristate "AMD 8111 (new PCI lance) support" + depends on NET_PCI && PCI + select CRC32 + select MII + help + If you have an AMD 8111-based PCI lance ethernet card, + answer Y here and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called amd8111e. +config AMD8111E_NAPI + bool "Enable NAPI support" + depends on AMD8111_ETH + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See <file:Documentation/networking/NAPI_HOWTO.txt> for more + information. + + If in doubt, say N. + +config ADAPTEC_STARFIRE + tristate "Adaptec Starfire/DuraLAN support" + depends on NET_PCI && PCI + select CRC32 + select MII + help + Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network + adapter. The DuraLAN chip is used on the 64 bit PCI boards from + Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip + driver. + + To compile this driver as a module, choose M here: the module + will be called starfire. This is recommended. + +config ADAPTEC_STARFIRE_NAPI + bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" + depends on ADAPTEC_STARFIRE && EXPERIMENTAL + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See <file:Documentation/networking/NAPI_HOWTO.txt> for more + information. + + If in doubt, say N. + +config AC3200 + tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" + depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ac3200. + +config APRICOT + tristate "Apricot Xen-II on board Ethernet" + depends on NET_PCI && ISA + help + If you have a network (Ethernet) controller of this type, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called apricot. + +config B44 + tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)" + depends on NET_PCI && PCI && EXPERIMENTAL + select MII + help + If you have a network (Ethernet) controller of this type, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called b44. + +config FORCEDETH + tristate "Reverse Engineered nForce Ethernet support (EXPERIMENTAL)" + depends on NET_PCI && PCI && EXPERIMENTAL + help + If you have a network (Ethernet) controller of this type, say Y and + read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called forcedeth. + + +config CS89x0 + tristate "CS89x0 support" + depends on NET_PCI && (ISA || ARCH_IXDP2X01) + ---help--- + Support for CS89x0 chipset based Ethernet cards. If you have a + network (Ethernet) card of this type, say Y and read the + Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto> as well as + <file:Documentation/networking/cs89x0.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called cs89x. + +config TC35815 + tristate "TOSHIBA TC35815 Ethernet support" + depends on NET_PCI && PCI && TOSHIBA_JMR3927 + +config DGRS + tristate "Digi Intl. RightSwitch SE-X support" + depends on NET_PCI && (PCI || EISA) + ---help--- + This is support for the Digi International RightSwitch series of + PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6 + models. If you have a network card of this type, say Y and read the + Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. More specific + information is contained in <file:Documentation/networking/dgrs.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called dgrs. + +config EEPRO100 + tristate "EtherExpressPro/100 support (eepro100, original Becker driver)" + depends on NET_PCI && PCI + select MII + help + If you have an Intel EtherExpress PRO/100 PCI network (Ethernet) + card, say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called eepro100. + + +config E100 + tristate "Intel(R) PRO/100+ support" + depends on NET_PCI && PCI + select MII + ---help--- + This driver supports Intel(R) PRO/100 family of adapters. + To verify that your adapter is supported, find the board ID number + on the adapter. Look for a label that has a barcode and a number + in the format 123456-001 (six digits hyphen three digits). + + Use the above information and the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + to identify the adapter. + + For the latest Intel PRO/100 network driver for Linux, see: + + <http://appsr.intel.com/scripts-df/support_intel.asp> + + More specific information on configuring the driver is in + <file:Documentation/networking/e100.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called e100. + +config LNE390 + tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" + depends on NET_PCI && EISA && EXPERIMENTAL + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called lne390. + +config FEALNX + tristate "Myson MTD-8xx PCI Ethernet support" + depends on NET_PCI && PCI + select CRC32 + select MII + help + Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet + cards. Specifications and data at + <http://www.myson.com.hk/mtd/datasheet/>. + +config NATSEMI + tristate "National Semiconductor DP8381x series PCI Ethernet support" + depends on NET_PCI && PCI + select CRC32 + help + This driver is for the National Semiconductor DP83810 series, + which is used in cards from PureData, NetGear, Linksys + and others, including the 83815 chip. + More specific information and updates are available from + <http://www.scyld.com/network/natsemi.html>. + +config NE2K_PCI + tristate "PCI NE2000 and clones support (see help)" + depends on NET_PCI && PCI + select CRC32 + ---help--- + This driver is for NE2000 compatible PCI cards. It will not work + with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 + support" below). If you have a PCI NE2000 network (Ethernet) card, + say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + This driver also works for the following NE2000 clone cards: + RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 + NetVin NV5000SC Via 86C926 SureCom NE34 Winbond + Holtek HT80232 Holtek HT80229 + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ne2k-pci. + +config NE3210 + tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" + depends on NET_PCI && EISA && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Note that this driver + will NOT WORK for NE3200 cards as they are completely different. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ne3210. + +config ES3210 + tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" + depends on NET_PCI && EISA && EXPERIMENTAL + select CRC32 + help + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called es3210. + +config 8139CP + tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" + depends on NET_PCI && PCI && EXPERIMENTAL + select CRC32 + select MII + help + This is a driver for the Fast Ethernet PCI network cards based on + the RTL8139C+ chips. If you have one of those, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here: the module + will be called 8139cp. This is recommended. + +config 8139TOO + tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support" + depends on NET_PCI && PCI + select CRC32 + select MII + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the RTL8139 chips. If you have one of those, say Y and read + the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here: the module + will be called 8139too. This is recommended. + +config 8139TOO_PIO + bool "Use PIO instead of MMIO" + default y + depends on 8139TOO + help + This instructs the driver to use programmed I/O ports (PIO) instead + of PCI shared memory (MMIO). This can possibly solve some problems + in case your mainboard has memory consistency issues. If unsure, + say N. + +config 8139TOO_TUNE_TWISTER + bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)" + depends on 8139TOO + help + This implements a function which might come in handy in case you + are using low quality on long cabling. It is required for RealTek + RTL-8139 revision K boards, and totally unused otherwise. It tries + to match the transceiver to the cable characteristics. This is + experimental since hardly documented by the manufacturer. + If unsure, say Y. + +config 8139TOO_8129 + bool "Support for older RTL-8129/8130 boards" + depends on 8139TOO + help + This enables support for the older and uncommon RTL-8129 and + RTL-8130 chips, which support MII via an external transceiver, + instead of an internal one. Disabling this option will save some + memory by making the code size smaller. If unsure, say Y. + +config 8139_OLD_RX_RESET + bool "Use older RX-reset method" + depends on 8139TOO + help + The 8139too driver was recently updated to contain a more rapid + reset sequence, in the face of severe receive errors. This "new" + RX-reset method should be adequate for all boards. But if you + experience problems, you can enable this option to restore the + old RX-reset behavior. If unsure, say N. + +config SIS900 + tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" + depends on NET_PCI && PCI + select CRC32 + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in + SiS 630 and SiS 540 chipsets. If you have one of those, say Y and + read the Ethernet-HOWTO, available at + <http://www.tldp.org/docs.html#howto>. Please read + <file:Documentation/networking/sis900.txt> and comments at the + beginning of <file:drivers/net/sis900.c> for more information. + + This driver also supports AMD 79C901 HomePNA so that you can use + your phone line as a network cable. + + To compile this driver as a module, choose M here: the module + will be called sis900. This is recommended. + +config EPIC100 + tristate "SMC EtherPower II" + depends on NET_PCI && PCI + select CRC32 + select MII + help + This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, + which is based on the SMC83c17x (EPIC/100). + More specific information and updates are available from + <http://www.scyld.com/network/epic100.html>. + +config SUNDANCE + tristate "Sundance Alta support" + depends on NET_PCI && PCI + select CRC32 + select MII + help + This driver is for the Sundance "Alta" chip. + More specific information and updates are available from + <http://www.scyld.com/network/sundance.html>. + +config SUNDANCE_MMIO + bool "Use MMIO instead of PIO" + depends on SUNDANCE + help + Enable memory-mapped I/O for interaction with Sundance NIC registers. + Do NOT enable this by default, PIO (enabled when MMIO is disabled) + is known to solve bugs on certain chips. + + If unsure, say N. + +config TLAN + tristate "TI ThunderLAN support" + depends on NET_PCI && (PCI || EISA) && !64BIT + ---help--- + If you have a PCI Ethernet network card based on the ThunderLAN chip + which is supported by this driver, say Y and read the + Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Devices currently supported by this driver are Compaq Netelligent, + Compaq NetFlex and Olicom cards. Please read the file + <file:Documentation/networking/tlan.txt> for more details. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called tlan. + + Please email feedback to <torben.mathiasen@compaq.com>. + +config VIA_RHINE + tristate "VIA Rhine support" + depends on NET_PCI && PCI + select CRC32 + select MII + help + If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), + Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type + Ethernet functions can also be found integrated on South Bridges + (e.g. VT8235). + + To compile this driver as a module, choose M here. The module + will be called via-rhine. + +config VIA_RHINE_MMIO + bool "Use MMIO instead of PIO" + depends on VIA_RHINE + help + This instructs the driver to use PCI shared memory (MMIO) instead of + programmed I/O ports (PIO). Enabling this gives an improvement in + processing time in parts of the driver. + + If unsure, say Y. + +config LAN_SAA9730 + bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" + depends on NET_PCI && EXPERIMENTAL && MIPS + help + The SAA9730 is a combined multimedia and peripheral controller used + in thin clients, Internet access terminals, and diskless + workstations. + See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>. + +config NET_POCKET + bool "Pocket and portable adapters" + depends on NET_ETHERNET && ISA + ---help--- + Cute little network (Ethernet) devices which attach to the parallel + port ("pocket adapters"), commonly used with laptops. If you have + one of those, say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + If you want to plug a network (or some other) card into the PCMCIA + (or PC-card) slot of your laptop instead (PCMCIA is the standard for + credit card size extension cards used by all modern laptops), you + need the pcmcia-cs package (location contained in the file + <file:Documentation/Changes>) and you can say N here. + + Laptop users should read the Linux Laptop home page at + <http://www.linux-on-laptops.com/> or + Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about this class of network devices. If you say Y, you + will be asked for your specific device in the following questions. + +config ATP + tristate "AT-LAN-TEC/RealTek pocket adapter support" + depends on NET_POCKET && ISA && X86 + select CRC32 + ---help--- + This is a network (Ethernet) device which attaches to your parallel + port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>, if you + want to use this. If you intend to use this driver, you should have + said N to the "Parallel printer support", because the two drivers + don't like each other. + + To compile this driver as a module, choose M here: the module + will be called atp. + +config DE600 + tristate "D-Link DE600 pocket adapter support" + depends on NET_POCKET && ISA + ---help--- + This is a network (Ethernet) device which attaches to your parallel + port. Read <file:Documentation/networking/DLINK.txt> as well as the + Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, if you want to use + this. It is possible to have several devices share a single parallel + port and it is safe to compile the corresponding drivers into the + kernel. + + To compile this driver as a module, choose M here: the module + will be called de600. + +config DE620 + tristate "D-Link DE620 pocket adapter support" + depends on NET_POCKET && ISA + ---help--- + This is a network (Ethernet) device which attaches to your parallel + port. Read <file:Documentation/networking/DLINK.txt> as well as the + Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, if you want to use + this. It is possible to have several devices share a single parallel + port and it is safe to compile the corresponding drivers into the + kernel. + + To compile this driver as a module, choose M here: the module + will be called de620. + +config SGISEEQ + tristate "SGI Seeq ethernet controller support" + depends on NET_ETHERNET && SGI_IP22 + help + Say Y here if you have an Seeq based Ethernet network card. This is + used in many Silicon Graphics machines. + +config DECLANCE + tristate "DEC LANCE ethernet controller support" + depends on NET_ETHERNET && MACH_DECSTATION + select CRC32 + help + This driver is for the series of Ethernet controllers produced by + DEC (now Compaq) based on the AMD Lance chipset, including the + DEPCA series. (This chipset is better known via the NE2100 cards.) + +config 68360_ENET + bool "Motorola 68360 ethernet controller" + depends on M68360 + help + Say Y here if you want to use the built-in ethernet controller of + the Motorola 68360 processor. + +config FEC + bool "FEC ethernet controller (of ColdFire 5272)" + depends on M5272 || M5282 + help + Say Y here if you want to use the built-in 10/100 Fast ethernet + controller on the Motorola ColdFire 5272 processor. + +config NE_H8300 + tristate "NE2000 compatible support for H8/300" + depends on H8300 && NET_ETHERNET + help + Say Y here if you want to use the NE2000 compatible + controller on the Renesas H8/300 processor. + +source "drivers/net/fec_8xx/Kconfig" + +endmenu + +# +# Gigabit Ethernet +# + +menu "Ethernet (1000 Mbit)" + depends on NETDEVICES && !UML + +config ACENIC + tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" + depends on PCI + ---help--- + Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear + GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet + adapter. The driver allows for using the Jumbo Frame option (9000 + bytes/frame) however it requires that your switches can handle this + as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig + line. + + To compile this driver as a module, choose M here: the + module will be called acenic. + +config ACENIC_OMIT_TIGON_I + bool "Omit support for old Tigon I based AceNICs" + depends on ACENIC + help + Say Y here if you only have Tigon II based AceNICs and want to leave + out support for the older Tigon I based cards which are no longer + being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B + version)). This will reduce the size of the driver object by + app. 100KB. If you are not sure whether your card is a Tigon I or a + Tigon II, say N here. + + The safe and default value for this is N. + +config DL2K + tristate "D-Link DL2000-based Gigabit Ethernet support" + depends on PCI + select CRC32 + help + This driver supports D-Link 2000-based gigabit ethernet cards, which + includes + D-Link DGE-550T Gigabit Ethernet Adapter. + D-Link DL2000-based Gigabit Ethernet Adapter. + + To compile this driver as a module, choose M here: the + module will be called dl2k. + +config E1000 + tristate "Intel(R) PRO/1000 Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) PRO/1000 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called e1000. + +config E1000_NAPI + bool "Use Rx Polling (NAPI)" + depends on E1000 + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See <file:Documentation/networking/NAPI_HOWTO.txt> for more + information. + + If in doubt, say N. + +config MYRI_SBUS + tristate "MyriCOM Gigabit Ethernet support" + depends on SBUS + help + This driver supports MyriCOM Sbus gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called myri_sbus. This is recommended. + +config NS83820 + tristate "National Semiconduct DP83820 support" + depends on PCI + help + This is a driver for the National Semiconductor DP83820 series + of gigabit ethernet MACs. Cards using this chipset include + the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX, + SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of + zero copy. + +config HAMACHI + tristate "Packet Engines Hamachi GNIC-II support" + depends on PCI + select MII + help + If you have a Gigabit Ethernet card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called hamachi. + +config YELLOWFIN + tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet + adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is + used by the Beowulf Linux cluster project. See + <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more + information about this driver in particular and Beowulf in general. + + To compile this driver as a module, choose M here: the module + will be called yellowfin. This is recommended. + +config R8169 + tristate "Realtek 8169 gigabit ethernet support" + depends on PCI + select CRC32 + ---help--- + Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called r8169. This is recommended. + +config R8169_NAPI + bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" + depends on R8169 && EXPERIMENTAL + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See <file:Documentation/networking/NAPI_HOWTO.txt> for more + information. + + If in doubt, say N. + +config R8169_VLAN + bool "VLAN support" + depends on R8169 && VLAN_8021Q + ---help--- + Say Y here for the r8169 driver to support the functions required + by the kernel 802.1Q code. + + If in doubt, say Y. + +config SK98LIN + tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" + depends on PCI + ---help--- + Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx + compliant Gigabit Ethernet Adapter. The following adapters are supported + by this driver: + - 3Com 3C940 Gigabit LOM Ethernet Adapter + - 3Com 3C941 Gigabit LOM Ethernet Adapter + - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971T Gigabit Ethernet Adapter + - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 + - DGE-530T Gigabit Ethernet Adapter + - EG1032 v2 Instant Gigabit Network Adapter + - EG1064 v2 Instant Gigabit Network Adapter + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) + - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) + - Marvell RDK-8001 Adapter + - Marvell RDK-8002 Adapter + - Marvell RDK-8003 Adapter + - Marvell RDK-8004 Adapter + - Marvell RDK-8006 Adapter + - Marvell RDK-8007 Adapter + - Marvell RDK-8008 Adapter + - Marvell RDK-8009 Adapter + - Marvell RDK-8010 Adapter + - Marvell RDK-8011 Adapter + - Marvell RDK-8012 Adapter + - Marvell RDK-8052 Adapter + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) + - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) + - SK-9521 10/100/1000Base-T Adapter + - SK-9521 V2.0 10/100/1000Base-T Adapter + - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) + - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter + - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) + - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) + - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter + - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) + - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) + - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) + - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) + - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) + - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) + - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter + - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) + - SMC EZ Card 1000 (SMC9452TXV.2) + + The adapters support Jumbo Frames. + The dual link adapters support link-failover and dual port features. + Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support + the scatter-gather functionality with sendfile(). Please refer to + <file:Documentation/networking/sk98lin.txt> for more information about + optional driver parameters. + Questions concerning this driver may be addressed to: + <linux@syskonnect.de> + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/kbuild/modules.txt>. The module will + be called sk98lin. This is recommended. + +config VIA_VELOCITY + tristate "VIA Velocity support" + depends on NET_PCI && PCI + select CRC32 + select CRC_CCITT + select MII + help + If you have a VIA "Velocity" based network card say Y here. + + To compile this driver as a module, choose M here. The module + will be called via-velocity. + +config TIGON3 + tristate "Broadcom Tigon3 support" + depends on PCI + help + This driver supports Broadcom Tigon3 based gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called tg3. This is recommended. + +config GIANFAR + tristate "Gianfar Ethernet" + depends on 85xx || 83xx + help + This driver supports the Gigabit TSEC on the MPC85xx + family of chips, and the FEC on the 8540 + +config GFAR_NAPI + bool "NAPI Support" + depends on GIANFAR + +config MV643XX_ETH + tristate "MV-643XX Ethernet support" + depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 + help + This driver supports the gigabit Ethernet on the Marvell MV643XX + chipset which is used in the Momenco Ocelot C and Jaguar ATX and + Pegasos II, amongst other PPC and MIPS boards. + +config MV643XX_ETH_0 + bool "MV-643XX Port 0" + depends on MV643XX_ETH + help + This enables support for Port 0 of the Marvell MV643XX Gigabit + Ethernet. + +config MV643XX_ETH_1 + bool "MV-643XX Port 1" + depends on MV643XX_ETH + help + This enables support for Port 1 of the Marvell MV643XX Gigabit + Ethernet. + +config MV643XX_ETH_2 + bool "MV-643XX Port 2" + depends on MV643XX_ETH + help + This enables support for Port 2 of the Marvell MV643XX Gigabit + Ethernet. + +endmenu + +# +# 10 Gigabit Ethernet +# + +menu "Ethernet (10000 Mbit)" + depends on NETDEVICES && !UML + +config IXGB + tristate "Intel(R) PRO/10GbE support" + depends on PCI + ---help--- + This driver supports Intel(R) PRO/10GbE family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/ixgb.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called ixgb. + +config IXGB_NAPI + bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" + depends on IXGB && EXPERIMENTAL + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See <file:Documentation/networking/NAPI_HOWTO.txt> for more + information. + + If in doubt, say N. + +config S2IO + tristate "S2IO 10Gbe XFrame NIC" + depends on PCI + ---help--- + This driver supports the 10Gbe XFrame NIC of S2IO. + For help regarding driver compilation, installation and + tuning please look into ~/drivers/net/s2io/README.txt. + +config S2IO_NAPI + bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" + depends on S2IO && EXPERIMENTAL + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See <file:Documentation/networking/NAPI_HOWTO.txt> for more + information. + + If in doubt, say N. + +config 2BUFF_MODE + bool "Use 2 Buffer Mode on Rx side." + depends on S2IO + ---help--- + On enabling the 2 buffer mode, the received frame will be + split into 2 parts before being DMA'ed to the hosts memory. + The parts are the ethernet header and ethernet payload. + This is useful on systems where DMA'ing to to unaligned + physical memory loactions comes with a heavy price. + If not sure please say N. + +endmenu + +if !UML +source "drivers/net/tokenring/Kconfig" + +source "drivers/net/wireless/Kconfig" + +source "drivers/net/pcmcia/Kconfig" +endif + +source "drivers/net/wan/Kconfig" + +source "drivers/atm/Kconfig" + +source "drivers/s390/net/Kconfig" + +config ISERIES_VETH + tristate "iSeries Virtual Ethernet driver support" + depends on NETDEVICES && PPC_ISERIES + +config FDDI + bool "FDDI driver support" + depends on NETDEVICES && (PCI || EISA) + help + Fiber Distributed Data Interface is a high speed local area network + design; essentially a replacement for high speed Ethernet. FDDI can + run over copper or fiber. If you are connected to such a network and + want a driver for the FDDI card in your computer, say Y here (and + then also Y to the driver for your FDDI card, below). Most people + will say N. + +config DEFXX + tristate "Digital DEFEA and DEFPA adapter support" + depends on FDDI && (PCI || EISA) + help + This is support for the DIGITAL series of EISA (DEFEA) and PCI + (DEFPA) controllers which can connect you to a local FDDI network. + +config SKFP + tristate "SysKonnect FDDI PCI support" + depends on FDDI && PCI + ---help--- + Say Y here if you have a SysKonnect FDDI PCI adapter. + The following adapters are supported by this driver: + - SK-5521 (SK-NET FDDI-UP) + - SK-5522 (SK-NET FDDI-UP DAS) + - SK-5541 (SK-NET FDDI-FP) + - SK-5543 (SK-NET FDDI-LP) + - SK-5544 (SK-NET FDDI-LP DAS) + - SK-5821 (SK-NET FDDI-UP64) + - SK-5822 (SK-NET FDDI-UP64 DAS) + - SK-5841 (SK-NET FDDI-FP64) + - SK-5843 (SK-NET FDDI-LP64) + - SK-5844 (SK-NET FDDI-LP64 DAS) + - Netelligent 100 FDDI DAS Fibre SC + - Netelligent 100 FDDI SAS Fibre SC + - Netelligent 100 FDDI DAS UTP + - Netelligent 100 FDDI SAS UTP + - Netelligent 100 FDDI SAS Fibre MIC + + Read <file:Documentation/networking/skfp.txt> for information about + the driver. + + Questions concerning this driver can be addressed to: + <linux@syskonnect.de> + + To compile this driver as a module, choose M here: the module + will be called skfp. This is recommended. + +config HIPPI + bool "HIPPI driver support (EXPERIMENTAL)" + depends on NETDEVICES && EXPERIMENTAL && INET && PCI + help + HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and + 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI + can run over copper (25m) or fiber (300m on multi-mode or 10km on + single-mode). HIPPI networks are commonly used for clusters and to + connect to super computers. If you are connected to a HIPPI network + and have a HIPPI network card in your computer that you want to use + under Linux, say Y here (you must also remember to enable the driver + for your HIPPI card below). Most people will say N here. + +config ROADRUNNER + tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)" + depends on HIPPI && PCI + help + Say Y here if this is your PCI HIPPI network card. + + To compile this driver as a module, choose M here: the module + will be called rrunner. If unsure, say N. + +config ROADRUNNER_LARGE_RINGS + bool "Use large TX/RX rings (EXPERIMENTAL)" + depends on ROADRUNNER + help + If you say Y here, the RoadRunner driver will preallocate up to 2 MB + of additional memory to allow for fastest operation, both for + transmitting and receiving. This memory cannot be used by any other + kernel code or by user space programs. Say Y here only if you have + the memory. + +config PLIP + tristate "PLIP (parallel port) support" + depends on NETDEVICES && PARPORT + ---help--- + PLIP (Parallel Line Internet Protocol) is used to create a + reasonably fast mini network consisting of two (or, rarely, more) + local machines. A PLIP link from a Linux box is a popular means to + install a Linux distribution on a machine which doesn't have a + CD-ROM drive (a minimal system has to be transferred with floppies + first). The kernels on both machines need to have this PLIP option + enabled for this to work. + + The PLIP driver has two modes, mode 0 and mode 1. The parallel + ports (the connectors at the computers with 25 holes) are connected + with "null printer" or "Turbo Laplink" cables which can transmit 4 + bits at a time (mode 0) or with special PLIP cables, to be used on + bidirectional parallel ports only, which can transmit 8 bits at a + time (mode 1); you can find the wiring of these cables in + <file:Documentation/networking/PLIP.txt>. The cables can be up to + 15m long. Mode 0 works also if one of the machines runs DOS/Windows + and has some PLIP software installed, e.g. the Crynwr PLIP packet + driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>) + and winsock or NCSA's telnet. + + If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well + as the NET-3-HOWTO, both available from + <http://www.tldp.org/docs.html#howto>. Note that the PLIP + protocol has been changed and this PLIP driver won't work together + with the PLIP support in Linux versions 1.0.x. This option enlarges + your kernel by about 8 KB. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called plip. If unsure, say Y or M, in case you buy a laptop + later. + +config PPP + tristate "PPP (point-to-point protocol) support" + depends on NETDEVICES + ---help--- + PPP (Point to Point Protocol) is a newer and better SLIP. It serves + the same purpose: sending Internet traffic over telephone (and other + serial) lines. Ask your access provider if they support it, because + otherwise you can't use it; most Internet access providers these + days support PPP rather than SLIP. + + To use PPP, you need an additional program called pppd as described + in the PPP-HOWTO, available at + <http://www.tldp.org/docs.html#howto>. Make sure that you have + the version of pppd recommended in <file:Documentation/Changes>. + The PPP option enlarges your kernel by about 16 KB. + + There are actually two versions of PPP: the traditional PPP for + asynchronous lines, such as regular analog phone lines, and + synchronous PPP which can be used over digital ISDN lines for + example. If you want to use PPP over phone lines or other + asynchronous serial lines, you need to say Y (or M) here and also to + the next option, "PPP support for async serial ports". For PPP over + synchronous lines, you should say Y (or M) here and to "Support + synchronous PPP", below. + + If you said Y to "Version information on all symbols" above, then + you cannot compile the PPP driver into the kernel; you can then only + compile it as a module. To compile this driver as a module, choose M + here and read <file:Documentation/networking/net-modules.txt>. + The module will be called ppp_generic. + +config PPP_MULTILINK + bool "PPP multilink support (EXPERIMENTAL)" + depends on PPP && EXPERIMENTAL + help + PPP multilink is a protocol (defined in RFC 1990) which allows you + to combine several (logical or physical) lines into one logical PPP + connection, so that you can utilize your full bandwidth. + + This has to be supported at the other end as well and you need a + version of the pppd daemon which understands the multilink protocol. + + If unsure, say N. + +config PPP_FILTER + bool "PPP filtering" + depends on PPP + help + Say Y here if you want to be able to filter the packets passing over + PPP interfaces. This allows you to control which packets count as + activity (i.e. which packets will reset the idle timer or bring up + a demand-dialled link) and which packets are to be dropped entirely. + You need to say Y here if you wish to use the pass-filter and + active-filter options to pppd. + + If unsure, say N. + +config PPP_ASYNC + tristate "PPP support for async serial ports" + depends on PPP + select CRC_CCITT + ---help--- + Say Y (or M) here if you want to be able to use PPP over standard + asynchronous serial ports, such as COM1 or COM2 on a PC. If you use + a modem (not a synchronous or ISDN modem) to contact your ISP, you + need this option. + + To compile this driver as a module, choose M here. + + If unsure, say Y. + +config PPP_SYNC_TTY + tristate "PPP support for sync tty ports" + depends on PPP + help + Say Y (or M) here if you want to be able to use PPP over synchronous + (HDLC) tty devices, such as the SyncLink adapter. These devices + are often used for high-speed leased lines like T1/E1. + + To compile this driver as a module, choose M here. + +config PPP_DEFLATE + tristate "PPP Deflate compression" + depends on PPP + select ZLIB_INFLATE + select ZLIB_DEFLATE + ---help--- + Support for the Deflate compression method for PPP, which uses the + Deflate algorithm (the same algorithm that gzip uses) to compress + each PPP packet before it is sent over the wire. The machine at the + other end of the PPP link (usually your ISP) has to support the + Deflate compression method as well for this to be useful. Even if + they don't support it, it is safe to say Y here. + + To compile this driver as a module, choose M here. + +config PPP_BSDCOMP + tristate "PPP BSD-Compress compression" + depends on PPP + ---help--- + Support for the BSD-Compress compression method for PPP, which uses + the LZW compression method to compress each PPP packet before it is + sent over the wire. The machine at the other end of the PPP link + (usually your ISP) has to support the BSD-Compress compression + method as well for this to be useful. Even if they don't support it, + it is safe to say Y here. + + The PPP Deflate compression method ("PPP Deflate compression", + above) is preferable to BSD-Compress, because it compresses better + and is patent-free. + + Note that the BSD compression code will always be compiled as a + module; it is called bsd_comp and will show up in the directory + modules once you have said "make modules". If unsure, say N. + +config PPPOE + tristate "PPP over Ethernet (EXPERIMENTAL)" + depends on EXPERIMENTAL && PPP + help + Support for PPP over Ethernet. + + This driver requires the latest version of pppd from the CVS + repository at cvs.samba.org. Alternatively, see the + RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) + which contains instruction on how to use this driver (under + the heading "Kernel mode PPPoE"). + +config PPPOATM + tristate "PPP over ATM" + depends on ATM && PPP + help + Support PPP (Point to Point Protocol) encapsulated in ATM frames. + This implementation does not yet comply with section 8 of RFC2364, + which can lead to bad results if the ATM peer loses state and + changes its encapsulation unilaterally. + +config SLIP + tristate "SLIP (serial line) support" + depends on NETDEVICES + ---help--- + Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to + connect to your Internet service provider or to connect to some + other local Unix box or if you want to configure your Linux box as a + Slip/CSlip server for other people to dial in. SLIP (Serial Line + Internet Protocol) is a protocol used to send Internet traffic over + serial connections such as telephone lines or null modem cables; + nowadays, the protocol PPP is more commonly used for this same + purpose. + + Normally, your access provider has to support SLIP in order for you + to be able to use it, but there is now a SLIP emulator called SLiRP + around (available from + <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which + allows you to use SLIP over a regular dial up shell connection. If + you plan to use SLiRP, make sure to say Y to CSLIP, below. The + NET-3-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, explains how to + configure SLIP. Note that you don't need this option if you just + want to run term (term is a program which gives you almost full + Internet connectivity if you have a regular dial up shell account on + some Internet connected Unix computer. Read + <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP + support will enlarge your kernel by about 4 KB. If unsure, say N. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called slip. + +config SLIP_COMPRESSED + bool "CSLIP compressed headers" + depends on SLIP + ---help--- + This protocol is faster than SLIP because it uses compression on the + TCP/IP headers (not on the data itself), but it has to be supported + on both ends. Ask your access provider if you are not sure and + answer Y, just in case. You will still be able to use plain SLIP. If + you plan to use SLiRP, the SLIP emulator (available from + <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which + allows you to use SLIP over a regular dial up shell connection, you + definitely want to say Y here. The NET-3-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, explains how to configure + CSLIP. This won't enlarge your kernel. + +config SLIP_SMART + bool "Keepalive and linefill" + depends on SLIP + help + Adds additional capabilities to the SLIP driver to support the + RELCOM line fill and keepalive monitoring. Ideal on poor quality + analogue lines. + +config SLIP_MODE_SLIP6 + bool "Six bit SLIP encapsulation" + depends on SLIP + help + Just occasionally you may need to run IP over hostile serial + networks that don't pass all control characters or are only seven + bit. Saying Y here adds an extra mode you can use with SLIP: + "slip6". In this mode, SLIP will only send normal ASCII symbols over + the serial device. Naturally, this has to be supported at the other + end of the link as well. It's good enough, for example, to run IP + over the async ports of a Camtec JNT Pad. If unsure, say N. + +config NET_FC + bool "Fibre Channel driver support" + depends on NETDEVICES && SCSI && PCI + help + Fibre Channel is a high speed serial protocol mainly used to connect + large storage devices to the computer; it is compatible with and + intended to replace SCSI. + + If you intend to use Fibre Channel, you need to have a Fibre channel + adaptor card in your computer; say Y here and to the driver for your + adaptor below. You also should have said Y to "SCSI support" and + "SCSI generic support". + +config SHAPER + tristate "Traffic Shaper (EXPERIMENTAL)" + depends on NETDEVICES && EXPERIMENTAL + ---help--- + The traffic shaper is a virtual network device that allows you to + limit the rate of outgoing data flow over some other network device. + The traffic that you want to slow down can then be routed through + these virtual devices. See + <file:Documentation/networking/shaper.txt> for more information. + + An alternative to this traffic shaper is the experimental + Class-Based Queueing (CBQ) scheduling support which you get if you + say Y to "QoS and/or fair queueing" above. + + To set up and configure shaper devices, you need the shapecfg + program, available from <ftp://shadow.cabi.net/pub/Linux/> in the + shaper package. + + To compile this driver as a module, choose M here: the module + will be called shaper. If unsure, say N. + +config NETCONSOLE + tristate "Network console logging support (EXPERIMENTAL)" + depends on NETDEVICES && EXPERIMENTAL + ---help--- + If you want to log kernel messages over the network, enable this. + See <file:Documentation/networking/netconsole.txt> for details. + |