Pull release into acpica branch

1 files changed, 107 insertions, 37 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 96f14ab1c1f5..ebd7313d7fc1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -447,7 +447,7 @@ config NET_SB1250_MAC
 
 config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
-	depends on NET_ETHERNET && PCI && SGI_IP27 && BROKEN
+	depends on NET_ETHERNET && PCI && SGI_IP27
 	select CRC32
 	select MII
 	help
@@ -475,6 +475,14 @@ config SGI_IOC3_ETH_HW_TX_CSUM
 	  the moment only acceleration of IPv4 is supported.  This option
 	  enables offloading for checksums on transmit.  If unsure, say Y.
 
+config MIPS_SIM_NET
+	tristate "MIPS simulator Network device (EXPERIMENTAL)"
+	depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL
+	help
+	  The MIPSNET device is a simple Ethernet network device which is
+	  emulated by the MIPS Simulator.
+	  If you are not using a MIPSsim or are unsure, say N.
+
 config SGI_O2MACE_ETH
 	tristate "SGI O2 MACE Fast Ethernet support"
 	depends on NET_ETHERNET && SGI_IP32=y
@@ -548,6 +556,14 @@ config SUNGEM
 	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
 	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
 
+config CASSINI
+	tristate "Sun Cassini support"
+	depends on NET_ETHERNET && PCI
+	select CRC32
+	help
+	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
+	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
+
 config NET_VENDOR_3COM
 	bool "3COM cards"
 	depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
@@ -796,7 +812,7 @@ config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
 	select MII
-	depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH)
+	depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00)
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
@@ -1147,38 +1163,74 @@ config IBMVETH
 	  be called ibmveth.
 
 config IBM_EMAC
-	bool "IBM PPC4xx EMAC driver support"
+	tristate "PowerPC 4xx on-chip Ethernet support"
 	depends on 4xx
-	select CRC32
-	---help---
-	  This driver supports the IBM PPC4xx EMAC family of on-chip
-	  Ethernet controllers.
-
-config IBM_EMAC_ERRMSG
-	bool "Verbose error messages"
-	depends on IBM_EMAC && BROKEN
+	help
+	  This driver supports the PowerPC 4xx EMAC family of on-chip
+          Ethernet controllers.
 
 config IBM_EMAC_RXB
 	int "Number of receive buffers"
 	depends on IBM_EMAC
-	default "128" if IBM_EMAC4
-	default "64"
+	default "128"
 
 config IBM_EMAC_TXB
 	int "Number of transmit buffers"
 	depends on IBM_EMAC
-	default "128" if IBM_EMAC4
-	default "8"
+	default "64"
+
+config IBM_EMAC_POLL_WEIGHT
+	int "MAL NAPI polling weight"
+	depends on IBM_EMAC
+	default "32"
 
-config IBM_EMAC_FGAP
-	int "Frame gap"
+config IBM_EMAC_RX_COPY_THRESHOLD
+	int "RX skb copy threshold (bytes)"
 	depends on IBM_EMAC
-	default "8"
+	default "256"
 
-config IBM_EMAC_SKBRES
-	int "Skb reserve amount"
+config IBM_EMAC_RX_SKB_HEADROOM
+	int "Additional RX skb headroom (bytes)"
 	depends on IBM_EMAC
 	default "0"
+	help
+	  Additional receive skb headroom. Note, that driver
+	  will always reserve at least 2 bytes to make IP header
+	  aligned, so usualy there is no need to add any additional
+	  headroom.
+	  
+	  If unsure, set to 0.
+
+config IBM_EMAC_PHY_RX_CLK_FIX
+	bool "PHY Rx clock workaround"
+	depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
+	help
+	  Enable this if EMAC attached to a PHY which doesn't generate
+	  RX clock if there is no link, if this is the case, you will 
+	  see "TX disable timeout" or "RX disable timeout" in the system
+	  log.
+	  
+	  If unsure, say N.
+
+config IBM_EMAC_DEBUG
+	bool "Debugging"
+	depends on IBM_EMAC
+	default n
+
+config IBM_EMAC_ZMII
+	bool
+	depends on IBM_EMAC && (NP405H || NP405L || 44x)
+	default y
+
+config IBM_EMAC_RGMII
+	bool
+	depends on IBM_EMAC && 440GX
+	default y
+		
+config IBM_EMAC_TAH
+	bool
+	depends on IBM_EMAC && 440GX
+	default y
 
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"
@@ -1647,7 +1699,7 @@ config LAN_SAA9730
 
 config NET_POCKET
 	bool "Pocket and portable adapters"
-	depends on NET_ETHERNET && ISA
+	depends on NET_ETHERNET && PARPORT
 	---help---
 	  Cute little network (Ethernet) devices which attach to the parallel
 	  port ("pocket adapters"), commonly used with laptops. If you have
@@ -1671,7 +1723,7 @@ config NET_POCKET
 
 config ATP
 	tristate "AT-LAN-TEC/RealTek pocket adapter support"
-	depends on NET_POCKET && ISA && X86
+	depends on NET_POCKET && PARPORT && X86
 	select CRC32
 	---help---
 	  This is a network (Ethernet) device which attaches to your parallel
@@ -1686,7 +1738,7 @@ config ATP
 
 config DE600
 	tristate "D-Link DE600 pocket adapter support"
-	depends on NET_POCKET && ISA
+	depends on NET_POCKET && PARPORT
 	---help---
 	  This is a network (Ethernet) device which attaches to your parallel
 	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
@@ -1701,7 +1753,7 @@ config DE600
 
 config DE620
 	tristate "D-Link DE620 pocket adapter support"
-	depends on NET_POCKET && ISA
+	depends on NET_POCKET && PARPORT
 	---help---
 	  This is a network (Ethernet) device which attaches to your parallel
 	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
@@ -1759,6 +1811,7 @@ config NE_H8300
 	  controller on the Renesas H8/300 processor.
 
 source "drivers/net/fec_8xx/Kconfig"
+source "drivers/net/fs_enet/Kconfig"
 
 endmenu
 
@@ -2075,6 +2128,7 @@ config SPIDER_NET
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on 85xx || 83xx
+	select PHYLIB
 	help
 	  This driver supports the Gigabit TSEC on the MPC85xx 
 	  family of chips, and the FEC on the 8540
@@ -2184,8 +2238,8 @@ config S2IO
 	depends on PCI
 	---help---
 	  This driver supports the 10Gbe XFrame NIC of S2IO. 
-	  For help regarding driver compilation, installation and 
-	  tuning please look into ~/drivers/net/s2io/README.txt.
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/s2io.txt>.
 
 config S2IO_NAPI
 	bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
@@ -2204,17 +2258,6 @@ config S2IO_NAPI
 
 	  If in doubt, say N.
 
-config 2BUFF_MODE
-	bool "Use 2 Buffer Mode on Rx side."
-	depends on S2IO
-	---help---
-	On enabling the 2 buffer mode, the received frame will be
-	split into 2 parts before being DMA'ed to the hosts memory.
-	The parts are the ethernet header and ethernet payload. 
-	This is useful on systems where DMA'ing to to unaligned 
-	physical memory loactions comes with a heavy price.
-	If not sure please say N.
-
 endmenu
 
 if !UML
@@ -2235,6 +2278,20 @@ config ISERIES_VETH
 	tristate "iSeries Virtual Ethernet driver support"
 	depends on PPC_ISERIES
 
+config RIONET
+	tristate "RapidIO Ethernet over messaging driver support"
+	depends on NETDEVICES && RAPIDIO
+
+config RIONET_TX_SIZE
+	int "Number of outbound queue entries"
+	depends on RIONET
+	default "128"
+
+config RIONET_RX_SIZE
+	int "Number of inbound queue entries"
+	depends on RIONET
+	default "128"
+
 config FDDI
 	bool "FDDI driver support"
 	depends on (PCI || EISA)
@@ -2466,6 +2523,19 @@ config PPP_BSDCOMP
 	  module; it is called bsd_comp and will show up in the directory
 	  modules once you have said "make modules". If unsure, say N.
 
+config PPP_MPPE
+       tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+       depends on PPP && EXPERIMENTAL
+       select CRYPTO
+       select CRYPTO_SHA1
+       select CRYPTO_ARC4
+       ---help---
+         Support for the MPPE Encryption protocol, as employed by the
+	 Microsoft Point-to-Point Tunneling Protocol.
+
+	 See http://pptpclient.sourceforge.net/ for information on
+	 configuring PPTP clients and servers to utilize this method.
+
 config PPPOE
 	tristate "PPP over Ethernet (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && PPP