summaryrefslogtreecommitdiffstats
path: root/drivers/net/arm
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-06-18 10:52:36 +0200
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-12 21:38:26 +0200
commit9f2f381f813858755f5b6ef7af316feda0726ef3 (patch)
treed92fe910d8a8ef2c06ddeeb88ecd786d315f713e /drivers/net/arm
parentbfin_mac: Move the Analog Devices Inc driver (diff)
downloadlinux-9f2f381f813858755f5b6ef7af316feda0726ef3.tar.xz
linux-9f2f381f813858755f5b6ef7af316feda0726ef3.zip
macb: Move the Atmel driver
Move the Atmel driver into drivers/net/ethernet/cadence/ and make the necessary Kconfig and Makefile changes. CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Diffstat (limited to 'drivers/net/arm')
-rw-r--r--drivers/net/arm/Kconfig12
-rw-r--r--drivers/net/arm/Makefile6
-rw-r--r--drivers/net/arm/at91_ether.c1254
-rw-r--r--drivers/net/arm/at91_ether.h109
4 files changed, 0 insertions, 1381 deletions
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
deleted file mode 100644
index 57d16b91d102..000000000000
--- a/drivers/net/arm/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Acorn Network device configuration
-# These are for Acorn's Expansion card network interfaces
-#
-
-config ARM_AT91_ETHER
- tristate "AT91RM9200 Ethernet support"
- depends on ARM && ARCH_AT91RM9200
- select MII
- help
- If you wish to compile a kernel for the AT91RM9200 and enable
- ethernet support, then you should always answer Y to this.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
deleted file mode 100644
index fc0f85c53a7e..000000000000
--- a/drivers/net/arm/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# File: drivers/net/arm/Makefile
-#
-# Makefile for the ARM network device drivers
-#
-
-obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
deleted file mode 100644
index 29dc43523cec..000000000000
--- a/drivers/net/arm/at91_ether.c
+++ /dev/null
@@ -1,1254 +0,0 @@
-/*
- * Ethernet driver for the Atmel AT91RM9200 (Thunder)
- *
- * Copyright (C) 2003 SAN People (Pty) Ltd
- *
- * Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
- * Initial version by Rick Bronson 01/11/2003
- *
- * Intel LXT971A PHY support by Christopher Bahns & David Knickerbocker
- * (Polaroid Corporation)
- *
- * Realtek RTL8201(B)L PHY support by Roman Avramenko <roman@imsystems.ru>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mii.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/dma-mapping.h>
-#include <linux/ethtool.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gfp.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/mach-types.h>
-
-#include <mach/at91rm9200_emac.h>
-#include <mach/gpio.h>
-#include <mach/board.h>
-
-#include "at91_ether.h"
-
-#define DRV_NAME "at91_ether"
-#define DRV_VERSION "1.0"
-
-#define LINK_POLL_INTERVAL (HZ)
-
-/* ..................................................................... */
-
-/*
- * Read from a EMAC register.
- */
-static inline unsigned long at91_emac_read(unsigned int reg)
-{
- void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
-
- return __raw_readl(emac_base + reg);
-}
-
-/*
- * Write to a EMAC register.
- */
-static inline void at91_emac_write(unsigned int reg, unsigned long value)
-{
- void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
-
- __raw_writel(value, emac_base + reg);
-}
-
-/* ........................... PHY INTERFACE ........................... */
-
-/*
- * Enable the MDIO bit in MAC control register
- * When not called from an interrupt-handler, access to the PHY must be
- * protected by a spinlock.
- */
-static void enable_mdi(void)
-{
- unsigned long ctl;
-
- ctl = at91_emac_read(AT91_EMAC_CTL);
- at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */
-}
-
-/*
- * Disable the MDIO bit in the MAC control register
- */
-static void disable_mdi(void)
-{
- unsigned long ctl;
-
- ctl = at91_emac_read(AT91_EMAC_CTL);
- at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */
-}
-
-/*
- * Wait until the PHY operation is complete.
- */
-static inline void at91_phy_wait(void) {
- unsigned long timeout = jiffies + 2;
-
- while (!(at91_emac_read(AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) {
- if (time_after(jiffies, timeout)) {
- printk("at91_ether: MIO timeout\n");
- break;
- }
- cpu_relax();
- }
-}
-
-/*
- * Write value to the a PHY register
- * Note: MDI interface is assumed to already have been enabled.
- */
-static void write_phy(unsigned char phy_addr, unsigned char address, unsigned int value)
-{
- at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W
- | ((phy_addr & 0x1f) << 23) | (address << 18) | (value & AT91_EMAC_DATA));
-
- /* Wait until IDLE bit in Network Status register is cleared */
- at91_phy_wait();
-}
-
-/*
- * Read value stored in a PHY register.
- * Note: MDI interface is assumed to already have been enabled.
- */
-static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int *value)
-{
- at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R
- | ((phy_addr & 0x1f) << 23) | (address << 18));
-
- /* Wait until IDLE bit in Network Status register is cleared */
- at91_phy_wait();
-
- *value = at91_emac_read(AT91_EMAC_MAN) & AT91_EMAC_DATA;
-}
-
-/* ........................... PHY MANAGEMENT .......................... */
-
-/*
- * Access the PHY to determine the current link speed and mode, and update the
- * MAC accordingly.
- * If no link or auto-negotiation is busy, then no changes are made.
- */
-static void update_linkspeed(struct net_device *dev, int silent)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int bmsr, bmcr, lpa, mac_cfg;
- unsigned int speed, duplex;
-
- if (!mii_link_ok(&lp->mii)) { /* no link */
- netif_carrier_off(dev);
- if (!silent)
- printk(KERN_INFO "%s: Link down.\n", dev->name);
- return;
- }
-
- /* Link up, or auto-negotiation still in progress */
- read_phy(lp->phy_address, MII_BMSR, &bmsr);
- read_phy(lp->phy_address, MII_BMCR, &bmcr);
- if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
- if (!(bmsr & BMSR_ANEGCOMPLETE))
- return; /* Do nothing - another interrupt generated when negotiation complete */
-
- read_phy(lp->phy_address, MII_LPA, &lpa);
- if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
- else speed = SPEED_10;
- if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL;
- else duplex = DUPLEX_HALF;
- } else {
- speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
- duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
- }
-
- /* Update the MAC */
- mac_cfg = at91_emac_read(AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD);
- if (speed == SPEED_100) {
- if (duplex == DUPLEX_FULL) /* 100 Full Duplex */
- mac_cfg |= AT91_EMAC_SPD | AT91_EMAC_FD;
- else /* 100 Half Duplex */
- mac_cfg |= AT91_EMAC_SPD;
- } else {
- if (duplex == DUPLEX_FULL) /* 10 Full Duplex */
- mac_cfg |= AT91_EMAC_FD;
- else {} /* 10 Half Duplex */
- }
- at91_emac_write(AT91_EMAC_CFG, mac_cfg);
-
- if (!silent)
- printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
- netif_carrier_on(dev);
-}
-
-/*
- * Handle interrupts from the PHY
- */
-static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct at91_private *lp = netdev_priv(dev);
- unsigned int phy;
-
- /*
- * This hander is triggered on both edges, but the PHY chips expect
- * level-triggering. We therefore have to check if the PHY actually has
- * an IRQ pending.
- */
- enable_mdi();
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
- read_phy(lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */
- if (!(phy & (1 << 0)))
- goto done;
- }
- else if (lp->phy_type == MII_LXT971A_ID) {
- read_phy(lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */
- if (!(phy & (1 << 2)))
- goto done;
- }
- else if (lp->phy_type == MII_BCM5221_ID) {
- read_phy(lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */
- if (!(phy & (1 << 0)))
- goto done;
- }
- else if (lp->phy_type == MII_KS8721_ID) {
- read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
- if (!(phy & ((1 << 2) | 1)))
- goto done;
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
- read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy);
- if (!(phy & ((1 << 2) | 1)))
- goto done;
- }
- else if (lp->phy_type == MII_DP83848_ID) {
- read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
- if (!(phy & (1 << 7)))
- goto done;
- }
-
- update_linkspeed(dev, 0);
-
-done:
- disable_mdi();
-
- return IRQ_HANDLED;
-}
-
-/*
- * Initialize and enable the PHY interrupt for link-state changes
- */
-static void enable_phyirq(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int dsintr, irq_number;
- int status;
-
- irq_number = lp->board_data.phy_irq_pin;
- if (!irq_number) {
- /*
- * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
- * or board does not have it connected.
- */
- mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
- return;
- }
-
- status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
- if (status) {
- printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
- return;
- }
-
- spin_lock_irq(&lp->lock);
- enable_mdi();
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
- read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
- dsintr = dsintr & ~0xf00; /* clear bits 8..11 */
- write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
- read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
- dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */
- write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
- }
- else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
- dsintr = (1 << 15) | ( 1 << 14);
- write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
- dsintr = (1 << 10) | ( 1 << 8);
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
- read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
- dsintr = dsintr | 0x500; /* set bits 8, 10 */
- write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
- }
- else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
- read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
- dsintr = dsintr | 0x3c; /* set bits 2..5 */
- write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
- read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
- dsintr = dsintr | 0x3; /* set bits 0,1 */
- write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
- }
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-}
-
-/*
- * Disable the PHY interrupt
- */
-static void disable_phyirq(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int dsintr;
- unsigned int irq_number;
-
- irq_number = lp->board_data.phy_irq_pin;
- if (!irq_number) {
- del_timer_sync(&lp->check_timer);
- return;
- }
-
- spin_lock_irq(&lp->lock);
- enable_mdi();
-
- if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
- read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
- dsintr = dsintr | 0xf00; /* set bits 8..11 */
- write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
- read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
- dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */
- write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
- }
- else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
- read_phy(lp->phy_address, MII_BCMINTR_REG, &dsintr);
- dsintr = ~(1 << 14);
- write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
- }
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
- read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
- dsintr = ~((1 << 10) | (1 << 8));
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- }
- else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
- read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
- dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
- write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
- }
- else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
- read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
- dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
- write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
- read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
- dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
- write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
- }
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
- free_irq(irq_number, dev); /* Free interrupt handler */
-}
-
-/*
- * Perform a software reset of the PHY.
- */
-#if 0
-static void reset_phy(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned int bmcr;
-
- spin_lock_irq(&lp->lock);
- enable_mdi();
-
- /* Perform PHY reset */
- write_phy(lp->phy_address, MII_BMCR, BMCR_RESET);
-
- /* Wait until PHY reset is complete */
- do {
- read_phy(lp->phy_address, MII_BMCR, &bmcr);
- } while (!(bmcr & BMCR_RESET));
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-}
-#endif
-
-static void at91ether_check_link(unsigned long dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct at91_private *lp = netdev_priv(dev);
-
- enable_mdi();
- update_linkspeed(dev, 1);
- disable_mdi();
-
- mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
-}
-
-/* ......................... ADDRESS MANAGEMENT ........................ */
-
-/*
- * NOTE: Your bootloader must always set the MAC address correctly before
- * booting into Linux.
- *
- * - It must always set the MAC address after reset, even if it doesn't
- * happen to access the Ethernet while it's booting. Some versions of
- * U-Boot on the AT91RM9200-DK do not do this.
- *
- * - Likewise it must store the addresses in the correct byte order.
- * MicroMonitor (uMon) on the CSB337 does this incorrectly (and
- * continues to do so, for bug-compatibility).
- */
-
-static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, unsigned int lo)
-{
- char addr[6];
-
- if (machine_is_csb337()) {
- addr[5] = (lo & 0xff); /* The CSB337 bootloader stores the MAC the wrong-way around */
- addr[4] = (lo & 0xff00) >> 8;
- addr[3] = (lo & 0xff0000) >> 16;
- addr[2] = (lo & 0xff000000) >> 24;
- addr[1] = (hi & 0xff);
- addr[0] = (hi & 0xff00) >> 8;
- }
- else {
- addr[0] = (lo & 0xff);
- addr[1] = (lo & 0xff00) >> 8;
- addr[2] = (lo & 0xff0000) >> 16;
- addr[3] = (lo & 0xff000000) >> 24;
- addr[4] = (hi & 0xff);
- addr[5] = (hi & 0xff00) >> 8;
- }
-
- if (is_valid_ether_addr(addr)) {
- memcpy(dev->dev_addr, &addr, 6);
- return 1;
- }
- return 0;
-}
-
-/*
- * Set the ethernet MAC address in dev->dev_addr
- */
-static void __init get_mac_address(struct net_device *dev)
-{
- /* Check Specific-Address 1 */
- if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA1H), at91_emac_read(AT91_EMAC_SA1L)))
- return;
- /* Check Specific-Address 2 */
- if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA2H), at91_emac_read(AT91_EMAC_SA2L)))
- return;
- /* Check Specific-Address 3 */
- if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA3H), at91_emac_read(AT91_EMAC_SA3L)))
- return;
- /* Check Specific-Address 4 */
- if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA4H), at91_emac_read(AT91_EMAC_SA4L)))
- return;
-
- printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
-}
-
-/*
- * Program the hardware MAC address from dev->dev_addr.
- */
-static void update_mac_address(struct net_device *dev)
-{
- at91_emac_write(AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
- at91_emac_write(AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
-
- at91_emac_write(AT91_EMAC_SA2L, 0);
- at91_emac_write(AT91_EMAC_SA2H, 0);
-}
-
-/*
- * Store the new hardware address in dev->dev_addr, and update the MAC.
- */
-static int set_mac_address(struct net_device *dev, void* addr)
-{
- struct sockaddr *address = addr;
-
- if (!is_valid_ether_addr(address->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
- update_mac_address(dev);
-
- printk("%s: Setting MAC address to %pM\n", dev->name,
- dev->dev_addr);
-
- return 0;
-}
-
-static int inline hash_bit_value(int bitnr, __u8 *addr)
-{
- if (addr[bitnr / 8] & (1 << (bitnr % 8)))
- return 1;
- return 0;
-}
-
-/*
- * The hash address register is 64 bits long and takes up two locations in the memory map.
- * The least significant bits are stored in EMAC_HSL and the most significant
- * bits in EMAC_HSH.
- *
- * The unicast hash enable and the multicast hash enable bits in the network configuration
- * register enable the reception of hash matched frames. The destination address is
- * reduced to a 6 bit index into the 64 bit hash register using the following hash function.
- * The hash function is an exclusive or of every sixth bit of the destination address.
- * hash_index[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
- * hash_index[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
- * hash_index[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
- * hash_index[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
- * hash_index[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
- * hash_index[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
- * da[0] represents the least significant bit of the first byte received, that is, the multicast/
- * unicast indicator, and da[47] represents the most significant bit of the last byte
- * received.
- * If the hash index points to a bit that is set in the hash register then the frame will be
- * matched according to whether the frame is multicast or unicast.
- * A multicast match will be signalled if the multicast hash enable bit is set, da[0] is 1 and
- * the hash index points to a bit set in the hash register.
- * A unicast match will be signalled if the unicast hash enable bit is set, da[0] is 0 and the
- * hash index points to a bit set in the hash register.
- * To receive all multicast frames, the hash register should be set with all ones and the
- * multicast hash enable bit should be set in the network configuration register.
- */
-
-/*
- * Return the hash index value for the specified address.
- */
-static int hash_get_index(__u8 *addr)
-{
- int i, j, bitval;
- int hash_index = 0;
-
- for (j = 0; j < 6; j++) {
- for (i = 0, bitval = 0; i < 8; i++)
- bitval ^= hash_bit_value(i*6 + j, addr);
-
- hash_index |= (bitval << j);
- }
-
- return hash_index;
-}
-
-/*
- * Add multicast addresses to the internal multicast-hash table.
- */
-static void at91ether_sethashtable(struct net_device *dev)
-{
- struct netdev_hw_addr *ha;
- unsigned long mc_filter[2];
- unsigned int bitnr;
-
- mc_filter[0] = mc_filter[1] = 0;
-
- netdev_for_each_mc_addr(ha, dev) {
- bitnr = hash_get_index(ha->addr);
- mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
- }
-
- at91_emac_write(AT91_EMAC_HSL, mc_filter[0]);
- at91_emac_write(AT91_EMAC_HSH, mc_filter[1]);
-}
-
-/*
- * Enable/Disable promiscuous and multicast modes.
- */
-static void at91ether_set_multicast_list(struct net_device *dev)
-{
- unsigned long cfg;
-
- cfg = at91_emac_read(AT91_EMAC_CFG);
-
- if (dev->flags & IFF_PROMISC) /* Enable promiscuous mode */
- cfg |= AT91_EMAC_CAF;
- else if (dev->flags & (~IFF_PROMISC)) /* Disable promiscuous mode */
- cfg &= ~AT91_EMAC_CAF;
-
- if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */
- at91_emac_write(AT91_EMAC_HSH, -1);
- at91_emac_write(AT91_EMAC_HSL, -1);
- cfg |= AT91_EMAC_MTI;
- } else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */
- at91ether_sethashtable(dev);
- cfg |= AT91_EMAC_MTI;
- } else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */
- at91_emac_write(AT91_EMAC_HSH, 0);
- at91_emac_write(AT91_EMAC_HSL, 0);
- cfg &= ~AT91_EMAC_MTI;
- }
-
- at91_emac_write(AT91_EMAC_CFG, cfg);
-}
-
-/* ......................... ETHTOOL SUPPORT ........................... */
-
-static int mdio_read(struct net_device *dev, int phy_id, int location)
-{
- unsigned int value;
-
- read_phy(phy_id, location, &value);
- return value;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
-{
- write_phy(phy_id, location, value);
-}
-
-static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct at91_private *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi();
-
- ret = mii_ethtool_gset(&lp->mii, cmd);
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
- if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */
- cmd->supported = SUPPORTED_FIBRE;
- cmd->port = PORT_FIBRE;
- }
-
- return ret;
-}
-
-static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct at91_private *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi();
-
- ret = mii_ethtool_sset(&lp->mii, cmd);
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
- return ret;
-}
-
-static int at91ether_nwayreset(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- int ret;
-
- spin_lock_irq(&lp->lock);
- enable_mdi();
-
- ret = mii_nway_restart(&lp->mii);
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
- return ret;
-}
-
-static void at91ether_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
- strlcpy(info->version, DRV_VERSION, sizeof(info->version));
- strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
-}
-
-static const struct ethtool_ops at91ether_ethtool_ops = {
- .get_settings = at91ether_get_settings,
- .set_settings = at91ether_set_settings,
- .get_drvinfo = at91ether_get_drvinfo,
- .nway_reset = at91ether_nwayreset,
- .get_link = ethtool_op_get_link,
-};
-
-static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct at91_private *lp = netdev_priv(dev);
- int res;
-
- if (!netif_running(dev))
- return -EINVAL;
-
- spin_lock_irq(&lp->lock);
- enable_mdi();
- res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
- return res;
-}
-
-/* ................................ MAC ................................ */
-
-/*
- * Initialize and start the Receiver and Transmit subsystems
- */
-static void at91ether_start(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- struct recv_desc_bufs *dlist, *dlist_phys;
- int i;
- unsigned long ctl;
-
- dlist = lp->dlist;
- dlist_phys = lp->dlist_phys;
-
- for (i = 0; i < MAX_RX_DESCR; i++) {
- dlist->descriptors[i].addr = (unsigned int) &dlist_phys->recv_buf[i][0];
- dlist->descriptors[i].size = 0;
- }
-
- /* Set the Wrap bit on the last descriptor */
- dlist->descriptors[i-1].addr |= EMAC_DESC_WRAP;
-
- /* Reset buffer index */
- lp->rxBuffIndex = 0;
-
- /* Program address of descriptor list in Rx Buffer Queue register */
- at91_emac_write(AT91_EMAC_RBQP, (unsigned long) dlist_phys);
-
- /* Enable Receive and Transmit */
- ctl = at91_emac_read(AT91_EMAC_CTL);
- at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE);
-}
-
-/*
- * Open the ethernet interface
- */
-static int at91ether_open(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned long ctl;
-
- if (!is_valid_ether_addr(dev->dev_addr))
- return -EADDRNOTAVAIL;
-
- clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */
-
- /* Clear internal statistics */
- ctl = at91_emac_read(AT91_EMAC_CTL);
- at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_CSR);
-
- /* Update the MAC address (incase user has changed it) */
- update_mac_address(dev);
-
- /* Enable PHY interrupt */
- enable_phyirq(dev);
-
- /* Enable MAC interrupts */
- at91_emac_write(AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA
- | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
- | AT91_EMAC_ROVR | AT91_EMAC_ABT);
-
- /* Determine current link speed */
- spin_lock_irq(&lp->lock);
- enable_mdi();
- update_linkspeed(dev, 0);
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
- at91ether_start(dev);
- netif_start_queue(dev);
- return 0;
-}
-
-/*
- * Close the interface
- */
-static int at91ether_close(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- unsigned long ctl;
-
- /* Disable Receiver and Transmitter */
- ctl = at91_emac_read(AT91_EMAC_CTL);
- at91_emac_write(AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE));
-
- /* Disable PHY interrupt */
- disable_phyirq(dev);
-
- /* Disable MAC interrupts */
- at91_emac_write(AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA
- | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
- | AT91_EMAC_ROVR | AT91_EMAC_ABT);
-
- netif_stop_queue(dev);
-
- clk_disable(lp->ether_clk); /* Disable Peripheral clock */
-
- return 0;
-}
-
-/*
- * Transmit packet.
- */
-static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
-
- if (at91_emac_read(AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) {
- netif_stop_queue(dev);
-
- /* Store packet information (to free when Tx completed) */
- lp->skb = skb;
- lp->skb_length = skb->len;
- lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
- dev->stats.tx_bytes += skb->len;
-
- /* Set address of the data in the Transmit Address register */
- at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
- /* Set length of the packet in the Transmit Control register */
- at91_emac_write(AT91_EMAC_TCR, skb->len);
-
- } else {
- printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
- return NETDEV_TX_BUSY; /* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
- on this skb, he also reports -ENETDOWN and printk's, so either
- we free and return(0) or don't free and return 1 */
- }
-
- return NETDEV_TX_OK;
-}
-
-/*
- * Update the current statistics from the internal statistics registers.
- */
-static struct net_device_stats *at91ether_stats(struct net_device *dev)
-{
- int ale, lenerr, seqe, lcol, ecol;
-
- if (netif_running(dev)) {
- dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK); /* Good frames received */
- ale = at91_emac_read(AT91_EMAC_ALE);
- dev->stats.rx_frame_errors += ale; /* Alignment errors */
- lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
- dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
- seqe = at91_emac_read(AT91_EMAC_SEQE);
- dev->stats.rx_crc_errors += seqe; /* CRC error */
- dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC); /* Receive buffer not available */
- dev->stats.rx_errors += (ale + lenerr + seqe
- + at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
-
- dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA); /* Frames successfully transmitted */
- dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE); /* Transmit FIFO underruns */
- dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE); /* Carrier Sense errors */
- dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
-
- lcol = at91_emac_read(AT91_EMAC_LCOL);
- ecol = at91_emac_read(AT91_EMAC_ECOL);
- dev->stats.tx_window_errors += lcol; /* Late collisions */
- dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
-
- dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
- }
- return &dev->stats;
-}
-
-/*
- * Extract received frame from buffer descriptors and sent to upper layers.
- * (Called from interrupt context)
- */
-static void at91ether_rx(struct net_device *dev)
-{
- struct at91_private *lp = netdev_priv(dev);
- struct recv_desc_bufs *dlist;
- unsigned char *p_recv;
- struct sk_buff *skb;
- unsigned int pktlen;
-
- dlist = lp->dlist;
- while (dlist->descriptors[lp->rxBuffIndex].addr & EMAC_DESC_DONE) {
- p_recv = dlist->recv_buf[lp->rxBuffIndex];
- pktlen = dlist->descriptors[lp->rxBuffIndex].size & 0x7ff; /* Length of frame including FCS */
- skb = dev_alloc_skb(pktlen + 2);
- if (skb != NULL) {
- skb_reserve(skb, 2);
- memcpy(skb_put(skb, pktlen), p_recv, pktlen);
-
- skb->protocol = eth_type_trans(skb, dev);
- dev->stats.rx_bytes += pktlen;
- netif_rx(skb);
- }
- else {
- dev->stats.rx_dropped += 1;
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
- }
-
- if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
- dev->stats.multicast++;
-
- dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */
- if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */
- lp->rxBuffIndex = 0;
- else
- lp->rxBuffIndex++;
- }
-}
-
-/*
- * MAC interrupt handler
- */
-static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct at91_private *lp = netdev_priv(dev);
- unsigned long intstatus, ctl;
-
- /* MAC Interrupt Status register indicates what interrupts are pending.
- It is automatically cleared once read. */
- intstatus = at91_emac_read(AT91_EMAC_ISR);
-
- if (intstatus & AT91_EMAC_RCOM) /* Receive complete */
- at91ether_rx(dev);
-
- if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */
- /* The TCOM bit is set even if the transmission failed. */
- if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
- dev->stats.tx_errors += 1;
-
- if (lp->skb) {
- dev_kfree_skb_irq(lp->skb);
- lp->skb = NULL;
- dma_unmap_single(NULL, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE);
- }
- netif_wake_queue(dev);
- }
-
- /* Work-around for Errata #11 */
- if (intstatus & AT91_EMAC_RBNA) {
- ctl = at91_emac_read(AT91_EMAC_CTL);
- at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE);
- at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE);
- }
-
- if (intstatus & AT91_EMAC_ROVR)
- printk("%s: ROVR error\n", dev->name);
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void at91ether_poll_controller(struct net_device *dev)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- at91ether_interrupt(dev->irq, dev);
- local_irq_restore(flags);
-}
-#endif
-
-static const struct net_device_ops at91ether_netdev_ops = {
- .ndo_open = at91ether_open,
- .ndo_stop = at91ether_close,
- .ndo_start_xmit = at91ether_start_xmit,
- .ndo_get_stats = at91ether_stats,
- .ndo_set_multicast_list = at91ether_set_multicast_list,
- .ndo_set_mac_address = set_mac_address,
- .ndo_do_ioctl = at91ether_ioctl,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = at91ether_poll_controller,
-#endif
-};
-
-/*
- * Initialize the ethernet interface
- */
-static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
- struct platform_device *pdev, struct clk *ether_clk)
-{
- struct at91_eth_data *board_data = pdev->dev.platform_data;
- struct net_device *dev;
- struct at91_private *lp;
- unsigned int val;
- int res;
-
- dev = alloc_etherdev(sizeof(struct at91_private));
- if (!dev)
- return -ENOMEM;
-
- dev->base_addr = AT91_VA_BASE_EMAC;
- dev->irq = AT91RM9200_ID_EMAC;
-
- /* Install the interrupt handler */
- if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
- free_netdev(dev);
- return -EBUSY;
- }
-
- /* Allocate memory for DMA Receive descriptors */
- lp = netdev_priv(dev);
- lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL);
- if (lp->dlist == NULL) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- return -ENOMEM;
- }
- lp->board_data = *board_data;
- lp->ether_clk = ether_clk;
- platform_set_drvdata(pdev, dev);
-
- spin_lock_init(&lp->lock);
-
- ether_setup(dev);
- dev->netdev_ops = &at91ether_netdev_ops;
- dev->ethtool_ops = &at91ether_ethtool_ops;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
- update_mac_address(dev); /* Program ethernet address into MAC */
-
- at91_emac_write(AT91_EMAC_CTL, 0);
-
- if (lp->board_data.is_rmii)
- at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII);
- else
- at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG);
-
- /* Perform PHY-specific initialization */
- spin_lock_irq(&lp->lock);
- enable_mdi();
- if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
- read_phy(phy_address, MII_DSCR_REG, &val);
- if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */
- lp->phy_media = PORT_FIBRE;
- } else if (machine_is_csb337()) {
- /* mix link activity status into LED2 link state */
- write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
- } else if (machine_is_ecbat91())
- write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-
- lp->mii.dev = dev; /* Support for ethtool */
- lp->mii.mdio_read = mdio_read;
- lp->mii.mdio_write = mdio_write;
- lp->mii.phy_id = phy_address;
- lp->mii.phy_id_mask = 0x1f;
- lp->mii.reg_num_mask = 0x1f;
-
- lp->phy_type = phy_type; /* Type of PHY connected */
- lp->phy_address = phy_address; /* MDI address of PHY */
-
- /* Register the network interface */
- res = register_netdev(dev);
- if (res) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
- return res;
- }
-
- /* Determine current link speed */
- spin_lock_irq(&lp->lock);
- enable_mdi();
- update_linkspeed(dev, 0);
- disable_mdi();
- spin_unlock_irq(&lp->lock);
- netif_carrier_off(dev); /* will be enabled in open() */
-
- /* If board has no PHY IRQ, use a timer to poll the PHY */
- if (!lp->board_data.phy_irq_pin) {
- init_timer(&lp->check_timer);
- lp->check_timer.data = (unsigned long)dev;
- lp->check_timer.function = at91ether_check_link;
- } else if (lp->board_data.phy_irq_pin >= 32)
- gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy");
-
- /* Display ethernet banner */
- printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
- dev->name, (uint) dev->base_addr, dev->irq,
- at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
- at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
- dev->dev_addr);
- if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
- printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
- else if (phy_type == MII_LXT971A_ID)
- printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name);
- else if (phy_type == MII_RTL8201_ID)
- printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name);
- else if (phy_type == MII_BCM5221_ID)
- printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
- else if (phy_type == MII_DP83847_ID)
- printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
- else if (phy_type == MII_DP83848_ID)
- printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- else if (phy_type == MII_AC101L_ID)
- printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
- else if (phy_type == MII_KS8721_ID)
- printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
- else if (phy_type == MII_T78Q21x3_ID)
- printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
- else if (phy_type == MII_LAN83C185_ID)
- printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
-
- return 0;
-}
-
-/*
- * Detect MAC and PHY and perform initialization
- */
-static int __init at91ether_probe(struct platform_device *pdev)
-{
- unsigned int phyid1, phyid2;
- int detected = -1;
- unsigned long phy_id;
- unsigned short phy_address = 0;
- struct clk *ether_clk;
-
- ether_clk = clk_get(&pdev->dev, "ether_clk");
- if (IS_ERR(ether_clk)) {
- printk(KERN_ERR "at91_ether: no clock defined\n");
- return -ENODEV;
- }
- clk_enable(ether_clk); /* Enable Peripheral clock */
-
- while ((detected != 0) && (phy_address < 32)) {
- /* Read the PHY ID registers */
- enable_mdi();
- read_phy(phy_address, MII_PHYSID1, &phyid1);
- read_phy(phy_address, MII_PHYSID2, &phyid2);
- disable_mdi();
-
- phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
- switch (phy_id) {
- case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
- case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
- case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
- case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
- case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
- case MII_DP83847_ID: /* National Semiconductor DP83847: */
- case MII_DP83848_ID: /* National Semiconductor DP83848: */
- case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
- case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
- case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
- case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
- detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
- break;
- }
-
- phy_address++;
- }
-
- clk_disable(ether_clk); /* Disable Peripheral clock */
-
- return detected;
-}
-
-static int __devexit at91ether_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct at91_private *lp = netdev_priv(dev);
-
- if (lp->board_data.phy_irq_pin >= 32)
- gpio_free(lp->board_data.phy_irq_pin);
-
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
- clk_put(lp->ether_clk);
-
- platform_set_drvdata(pdev, NULL);
- free_netdev(dev);
- return 0;
-}
-
-#ifdef CONFIG_PM
-
-static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- struct net_device *net_dev = platform_get_drvdata(pdev);
- struct at91_private *lp = netdev_priv(net_dev);
- int phy_irq = lp->board_data.phy_irq_pin;
-
- if (netif_running(net_dev)) {
- if (phy_irq)
- disable_irq(phy_irq);
-
- netif_stop_queue(net_dev);
- netif_device_detach(net_dev);
-
- clk_disable(lp->ether_clk);
- }
- return 0;
-}
-
-static int at91ether_resume(struct platform_device *pdev)
-{
- struct net_device *net_dev = platform_get_drvdata(pdev);
- struct at91_private *lp = netdev_priv(net_dev);
- int phy_irq = lp->board_data.phy_irq_pin;
-
- if (netif_running(net_dev)) {
- clk_enable(lp->ether_clk);
-
- netif_device_attach(net_dev);
- netif_start_queue(net_dev);
-
- if (phy_irq)
- enable_irq(phy_irq);
- }
- return 0;
-}
-
-#else
-#define at91ether_suspend NULL
-#define at91ether_resume NULL
-#endif
-
-static struct platform_driver at91ether_driver = {
- .remove = __devexit_p(at91ether_remove),
- .suspend = at91ether_suspend,
- .resume = at91ether_resume,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init at91ether_init(void)
-{
- return platform_driver_probe(&at91ether_driver, at91ether_probe);
-}
-
-static void __exit at91ether_exit(void)
-{
- platform_driver_unregister(&at91ether_driver);
-}
-
-module_init(at91ether_init)
-module_exit(at91ether_exit)
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
-MODULE_AUTHOR("Andrew Victor");
-MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/arm/at91_ether.h
deleted file mode 100644
index 353f4dab62be..000000000000
--- a/drivers/net/arm/at91_ether.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Ethernet driver for the Atmel AT91RM9200 (Thunder)
- *
- * Copyright (C) SAN People (Pty) Ltd
- *
- * Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
- * Initial version by Rick Bronson.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef AT91_ETHERNET
-#define AT91_ETHERNET
-
-
-/* Davicom 9161 PHY */
-#define MII_DM9161_ID 0x0181b880
-#define MII_DM9161A_ID 0x0181b8a0
-#define MII_DSCR_REG 16
-#define MII_DSCSR_REG 17
-#define MII_DSINTR_REG 21
-
-/* Intel LXT971A PHY */
-#define MII_LXT971A_ID 0x001378E0
-#define MII_ISINTE_REG 18
-#define MII_ISINTS_REG 19
-#define MII_LEDCTRL_REG 20
-
-/* Realtek RTL8201 PHY */
-#define MII_RTL8201_ID 0x00008200
-
-/* Broadcom BCM5221 PHY */
-#define MII_BCM5221_ID 0x004061e0
-#define MII_BCMINTR_REG 26
-
-/* National Semiconductor DP83847 */
-#define MII_DP83847_ID 0x20005c30
-
-/* National Semiconductor DP83848 */
-#define MII_DP83848_ID 0x20005c90
-#define MII_DPPHYSTS_REG 16
-#define MII_DPMICR_REG 17
-#define MII_DPMISR_REG 18
-
-/* Altima AC101L PHY */
-#define MII_AC101L_ID 0x00225520
-
-/* Micrel KS8721 PHY */
-#define MII_KS8721_ID 0x00221610
-
-/* Teridian 78Q2123/78Q2133 */
-#define MII_T78Q21x3_ID 0x000e7230
-#define MII_T78Q21INT_REG 17
-
-/* SMSC LAN83C185 */
-#define MII_LAN83C185_ID 0x0007C0A0
-
-/* ........................................................................ */
-
-#define MAX_RBUFF_SZ 0x600 /* 1518 rounded up */
-#define MAX_RX_DESCR 9 /* max number of receive buffers */
-
-#define EMAC_DESC_DONE 0x00000001 /* bit for if DMA is done */
-#define EMAC_DESC_WRAP 0x00000002 /* bit for wrap */
-
-#define EMAC_BROADCAST 0x80000000 /* broadcast address */
-#define EMAC_MULTICAST 0x40000000 /* multicast address */
-#define EMAC_UNICAST 0x20000000 /* unicast address */
-
-struct rbf_t
-{
- unsigned int addr;
- unsigned long size;
-};
-
-struct recv_desc_bufs
-{
- struct rbf_t descriptors[MAX_RX_DESCR]; /* must be on sizeof (rbf_t) boundary */
- char recv_buf[MAX_RX_DESCR][MAX_RBUFF_SZ]; /* must be on long boundary */
-};
-
-struct at91_private
-{
- struct mii_if_info mii; /* ethtool support */
- struct at91_eth_data board_data; /* board-specific configuration */
- struct clk *ether_clk; /* clock */
-
- /* PHY */
- unsigned long phy_type; /* type of PHY (PHY_ID) */
- spinlock_t lock; /* lock for MDI interface */
- short phy_media; /* media interface type */
- unsigned short phy_address; /* 5-bit MDI address of PHY (0..31) */
- struct timer_list check_timer; /* Poll link status */
-
- /* Transmit */
- struct sk_buff *skb; /* holds skb until xmit interrupt completes */
- dma_addr_t skb_physaddr; /* phys addr from pci_map_single */
- int skb_length; /* saved skb length for pci_unmap_single */
-
- /* Receive */
- int rxBuffIndex; /* index into receive descriptor list */
- struct recv_desc_bufs *dlist; /* descriptor list address */
- struct recv_desc_bufs *dlist_phys; /* descriptor list physical address */
-};
-
-#endif